Last change
on this file since 3144 was 2937, checked in by Bruno Cornec, 13 years ago |
svn merge -r 2849:2935 ../3.0
- Adds 3 binaries called potentially by udev o support USB key mount at restore time (Victor Gattegno)
- mindi only sets the boot flag of a USB device if none is present already (should avoid flip/flop situation)
- Fix a compatibility bug in analyze-my-lvm whete exclude lists with '|' was incorrectly analyzed (' ' still expected)
- Precise that -J is not supported by mondorestore yet.
- Fix a compatibility bug in mindi where exclude lists with '|' was incorrectly analyzed (' ' still expected)
- Install an MBR on USB devices when possible
- Improve error message in case mondorestore isn't found
- Adds support for more virtio devices for KVM restore
- Improve mbr.bin handling
- Fix an issue in test of FindKernel for Xen and non Xen cases
- Fix #492 by removing an extra useless fi
- Move fvat nd fat modules to CDROM_MODS in order to have them in the initrd to support saving logs to a USB device e.g.
- Fix an error when dmidecode reports comments before system name
- Fix previous broken patch on comment management for bkphw
- Improve msgs printed during kbd analysis
- Fix a small remaining pb with new comment support
- Try to again improve the mount/umount stuff in mondo
-Adds mention to OEL, CentOS, ScientifLinux as RHEL clones
- Fix a panadoid_free done on the wrong variable (solve a memory leak)
- Solve #495 by skipping the potential (auto-read-only) when analyzin /proc/mdstat result
- Fix some markup in man pages
- adds the post-nuke script sample for Debian (Guillaume Pernot/Andrée Leidenfrost)
- Avoid a useless umount when changing of afio set, let insist_on_cd check and perform if needed
- Copy everything under .ssh of root account to allow for sshfs mount without passwd at restore time.
- Adds support for bnx2i driver
- Try to fix #496 by supporting the protocol in the output of the mount command (sshfs#...)
- Uses the -d option of the mount command to avoid leaving loop devices in use. Probably provoked by the usage of a more recent busybox, but anyway that option doesn't hurt, and does nothing for non-loop devices. Should fix the problems reported on the ML with NFS and more than 8 ISO images (8 being the default number of loop devices available)
- Attempt to fix #436 by adding some newtDrawForm where appropriate.
- Fix bugs in the kernel detection routine of mindi (some echo were done without capturing their output, confusing the return). This should also help the Xen detection issue
- Change the logging function to be nearer from 2.2.10, and start using some
- Initialize some global fields with an empty string, now that newt Draws more regularly progress forms
- Mindi progression still not good, but showing now 3% when calling mindi. Would need a specific handling for the progress bar to evolve more afterwards
- Add compatibility with the latest SSSTK + PSP content for HP ProLiant + branding homogeneous now. We only take conrep out of the SSSTK pending a package availability. Using hpacuscripting now. Review of parameters called following test made.
- Fix #501 by pushing BOOT_SIZE to 36864 for certain Ubuntu cases
- Fix some remaining inconsistencis in the ProLiant HW backup. ready for usage.
- Fix an issue on udevadm call (needs an intermediate variable)
- Fix a remaining ProLiant tool call
- Remove again some wrong variable initialization for Net in order to not have strange messages now we call Draw more often
- Adds support for hwaddr (MAC addresses) at restore time, and map to the correct NIC if it's found at restore time (based on code from Stefan Heijmans)
- Try to Fix #499 by changing init in order to never exit, and rebooting using sysrq in /proc (not portable). Maybe should move to using a real init, and a separated rcS script.
- Fixes the shell msg error by using setsid as per Busybox FAQ
- Fix #491 by correctly checking Xen kernel used for a dom0 env (apollo13)
- Improves logging in Die()
- Improve again ProLiant HW support, by adding references to the yet to come SSSTK rpm so that conrep is called at its future right place.
- Improve mindi support for kernel 3.x
- Fix #499 for good, by using a real init from busybox and moving our init script to etc/init.d/rcS. We also now call the reboot from busybox to exit, which indeed reset the system correctly (in a VM at least which wasn't the case before). Reauires a new mindi-busybox as well.
- Attempt to solve #503 by handling /lib64 separately for udev and only if not a link (to /lib) for Ubuntu 64
- Improve again previous tests for bug #503
- Improve -d option description for NFS
- Allow http download for ftp content
- New italian mirror
- Fix #505 by documenting environment variables
- Fix a bug where on OBDR mode compression was turned off to create the OBDR content but not back on (report from the mailing list)
- solve http://trac.mondorescue.org/ticket/520 by Victor Gattegno
- Fix #524 as option -U needs a size also
- Removes useless gendf option
- Fix #511 now stabgrub is called also after conf file modifications
- Adds support for SUID binaries
- remove a useless xenkernelname variable from mindi
- Should fix #512 by clearing old scratchdir before changing to a new
- Simplify the function engaging SCSI for Smart Array controllers, and support as many controller as we have
- Add some binaries used on SLES 10 by udev
- Fix a syntax issue in newt-specific.c
- Fix a memory free bug where a used variable was freed to early
- Fix a memory free bug where a used variable was misused in asprintf/free
- Fix #498 by using an external program (hpsa_obdr_mode) which can set the mode of the tape to CD-ROM or Sequential at will.
That program will have to be downloaded from http://cciss.sf.net
- Adds support for the route command in mindi-busybox
- Force block size back to 32768 in OBDR mode after skipping the 2 tape marks, to read the additional rootfs data corerctly - Fix #498 for good it seems
- Adds support for a new pata_atiixp driver
- Fix #525 and improve printing when no /etc/raidtab, but still md devices
- Exclude /run similarly to /sys and /proc
- Fix a bug in mindi when having multiple swap partiions with same starting string (/dev/dm-1 and /dev/dm-16). We now add a space in the grep to avoid mischoice.
- Fix grub installation if we had to go in the hack part which wasn't using the correct variables to make decisions !
- Remove all mention of mondorescue.com from code
- Fix some website typo on the download page and precise that we now develop on Mageia
- Exclude sysfs devpts and tmpfs partitions found in RHEL 6.2 from analyze by mindi (made error messages)
- Force activation of first partition which should not be optional as everything is destroyed before
- Fix a bug in analyze-my-lvm where LVs were created in random order (the one of lvscan) instead of using the dm-xxx order, which creates issues at restore time between the mapping created then and the one we had at backup time which could be inconssistent
-mondoarchive now exists if the mt command is missing when needed
- Proper fix for analyze-my-lvm
- Fix #500 and #473 by adding support of old metadata format for mdadm if using grub < 0.9x or lilo on a md boot device (to be tested)
- Really never inject or eject when the -e option is passed or device is inappropriate (USB, Net, ...)
- Fix #577 by having factor back as a float (not a long ! it's a decimal value) and making the appropriate cast.
- Fix #578 by improving the regexp used for CD/DVD detection with -scanbus option
- Adds more verbosity when LVM creation fails.
- Fix #579 by checking with pipes on both sides of the string
- debugfs should be excluded from the device considered for fstab analysis
|
File size:
1.4 KB
|
Line | |
---|
1 | # $Id$
|
---|
2 | #
|
---|
3 | # Base System Tools that are mandatory inside the data disk
|
---|
4 | #
|
---|
5 | #
|
---|
6 | # Conf files
|
---|
7 | /etc/fstab
|
---|
8 | /etc/modules.conf
|
---|
9 | # On ArchLinux
|
---|
10 | /etc/modprobe.d/
|
---|
11 |
|
---|
12 | /etc/hosts
|
---|
13 | /etc/host.conf
|
---|
14 | /etc/resolv.conf
|
---|
15 | /etc/hosts.allow
|
---|
16 | /etc/hosts.deny
|
---|
17 | /etc/nsswitch.conf
|
---|
18 |
|
---|
19 | # Mondorescue requirements
|
---|
20 | /usr/sbin/mondorestore
|
---|
21 | /usr/bin/afio
|
---|
22 | # On Debian
|
---|
23 | /bin/afio
|
---|
24 | /usr/bin/star
|
---|
25 | /usr/sbin/ntfsclone
|
---|
26 |
|
---|
27 | # HW
|
---|
28 | /usr/sbin/parted
|
---|
29 | /sbin/parted
|
---|
30 | /usr/sbin/partprobe
|
---|
31 | /sbin/partprobe
|
---|
32 |
|
---|
33 | # File
|
---|
34 | /usr/bin/file
|
---|
35 | /usr/share/misc/file/magic
|
---|
36 | /usr/share/file/magic
|
---|
37 | # On ArchLinux
|
---|
38 | /usr/share/file/magic.mgc
|
---|
39 | /usr/share/misc/magic.mgc
|
---|
40 |
|
---|
41 | # ACLs
|
---|
42 | /usr/bin/getfattr
|
---|
43 | /usr/bin/setfattr
|
---|
44 | /usr/bin/getfacl
|
---|
45 | /usr/bin/setfacl
|
---|
46 |
|
---|
47 | # Compressors
|
---|
48 | # On RHEL
|
---|
49 | /usr/bin/bzip2
|
---|
50 | # On Debian and ArchLinux
|
---|
51 | /bin/bzip2
|
---|
52 | # is a link => No additional place
|
---|
53 | # On RHEL
|
---|
54 | /usr/bin/bunzip2
|
---|
55 | # On Debian and ArchLinux
|
---|
56 | /bin/bunzip2
|
---|
57 | /usr/bin/lzop
|
---|
58 | /usr/bin/lzma
|
---|
59 |
|
---|
60 | # Unix commands
|
---|
61 | /bin/chroot
|
---|
62 | /usr/sbin/chroot
|
---|
63 | /usr/bin/cmp
|
---|
64 | /sbin/ctrlaltdel
|
---|
65 | /bin/dd
|
---|
66 | /usr/bin/eject
|
---|
67 | /usr/bin/env
|
---|
68 | /sbin/halt
|
---|
69 | /usr/bin/halt
|
---|
70 | /sbin/ldconfig
|
---|
71 | /usr/bin/wc
|
---|
72 |
|
---|
73 | # Status ???
|
---|
74 | #
|
---|
75 | /usr/bin/du
|
---|
76 | /usr/bin/xargs
|
---|
77 | /usr/bin/head
|
---|
78 | /usr/bin/less
|
---|
79 | # On ArchLinux
|
---|
80 | /bin/less
|
---|
81 | /usr/bin/sort
|
---|
82 | /usr/bin/uniq
|
---|
83 | /usr/bin/reset
|
---|
84 | /sbin/ldconfig
|
---|
85 | /usr/bin/tee
|
---|
86 |
|
---|
87 | # For swap uuid support, ia64 and probably then more in the future
|
---|
88 | /usr/bin/perl
|
---|
89 |
|
---|
90 | # helps for debugging (optional)
|
---|
91 | /usr/bin/ldd
|
---|
92 | /usr/bin/strace
|
---|
93 | #/usr/bin/valgrind
|
---|
94 | #/usr/lib/valgrind/
|
---|
95 | #/usr/lib64/valgrind/
|
---|
Note:
See
TracBrowser
for help on using the repository browser.