Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (12 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/procps/Config.in

    r821 r1770  
    66menu "Process Utilities"
    77
    8 config CONFIG_FREE
     8config FREE
    99    bool "free"
    1010    default n
     
    1414      The shared memory column should be ignored; it is obsolete.
    1515
    16 config CONFIG_FUSER
     16config FUSER
    1717    bool "fuser"
    1818    default n
     
    2222      (TCP or UDP) port open.
    2323
    24 config CONFIG_KILL
     24config KILL
    2525    bool "kill"
    2626    default n
     
    3030      signal is sent.
    3131
    32 config CONFIG_KILLALL
     32config KILLALL
    3333    bool "killall"
    3434    default n
    35     depends on CONFIG_KILL
     35    depends on KILL
    3636    help
    3737      killall sends a signal to all processes running any of the
     
    3939      sent.
    4040
    41 config CONFIG_PIDOF
     41config KILLALL5
     42    bool "killall5"
     43    default n
     44    depends on KILL
     45
     46config NMETER
     47    bool "nmeter"
     48    default n
     49    help
     50      Prints selected system stats continuously, one line per update.
     51
     52config PIDOF
    4253    bool "pidof"
    4354    default n
     
    4657      those id's on the standard output.
    4758
    48 config CONFIG_FEATURE_PIDOF_SINGLE
     59config FEATURE_PIDOF_SINGLE
    4960    bool "Enable argument for single shot (-s)"
    5061    default n
    51     depends on CONFIG_PIDOF
     62    depends on PIDOF
    5263    help
    5364      Support argument '-s' for returning only the first pid found.
    5465
    55 config CONFIG_FEATURE_PIDOF_OMIT
     66config FEATURE_PIDOF_OMIT
    5667    bool "Enable argument for omitting pids (-o)"
    5768    default n
    58     depends on CONFIG_PIDOF
     69    depends on PIDOF
    5970    help
    6071      Support argument '-o' for omitting the given pids in output.
     
    6273      of the pidof, in other words the calling shell or shell script.
    6374
    64 config CONFIG_PS
     75config PS
    6576    bool "ps"
    6677    default n
     
    6879      ps gives a snapshot of the current processes.
    6980
    70 config CONFIG_FEATURE_PS_WIDE
     81config FEATURE_PS_WIDE
    7182    bool "Enable argument for wide output (-w)"
    7283    default n
    73     depends on CONFIG_PS
     84    depends on PS
    7485    help
    7586      Support argument 'w' for wide output.
     
    7788      one, the length is unlimited.
    7889
    79 config CONFIG_RENICE
     90config RENICE
    8091    bool "renice"
    8192    default n
     
    8495      processes.
    8596
    86 config CONFIG_BB_SYSCTL
     97config BB_SYSCTL
    8798    bool "sysctl"
    8899    default n
     
    90101      Configure kernel parameters at runtime.
    91102
    92 config CONFIG_TOP
     103config TOP
    93104    bool "top"
    94105    default n
     
    97108      system.
    98109
    99 config CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE
    100     bool "Support showing CPU usage percentage (add 2k bytes)"
     110config FEATURE_TOP_CPU_USAGE_PERCENTAGE
     111    bool "Show CPU per-process usage percentage (adds 2k bytes)"
    101112    default y
    102     depends on CONFIG_TOP
     113    depends on TOP
    103114    help
    104       Make top display CPU usage.
     115      Make top display CPU usage for each process.
    105116
    106 config CONFIG_UPTIME
     117config FEATURE_TOP_CPU_GLOBAL_PERCENTS
     118    bool "Show CPU global usage percentage (adds 0.5k bytes)"
     119    default y
     120    depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE
     121    help
     122      Makes top display "CPU: NN% usr NN% sys..." line.
     123
     124config FEATURE_TOP_DECIMALS
     125    bool "Show 1/10th of a percent in CPU/mem statistics (adds 0.3k bytes)"
     126    default n
     127    depends on FEATURE_TOP_CPU_USAGE_PERCENTAGE
     128    help
     129      Show 1/10th of a percent in CPU/mem statistics.
     130
     131config UPTIME
    107132    bool "uptime"
    108133    default n
     
    112137      on, and the system load averages for the past 1, 5, and 15 minutes.
    113138
     139config WATCH
     140    bool "watch"
     141    default n
     142    #huh?? select DATE
     143    help
     144      watch is used to execute a program periodically, showing
     145      output to the screen.
     146
    114147
    115148endmenu
Note: See TracChangeset for help on using the changeset viewer.