source: MondoRescue/branches/stable/mindi-busybox/modutils/Config.in@ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 16 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)
File size: 4.4 KB
Line 
1#
2# For a description of the syntax of this configuration file,
3# see scripts/kbuild/config-language.txt.
4#
5
6menu "Linux Module Utilities"
7
8config INSMOD
9 bool "insmod"
10 default n
11 help
12 insmod is used to load specified modules in the running kernel.
13
14config FEATURE_INSMOD_VERSION_CHECKING
15 bool "Module version checking"
16 default n
17 depends on INSMOD && FEATURE_2_4_MODULES
18 help
19 Support checking of versions for modules. This is used to
20 ensure that the kernel and module are made for each other.
21
22config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
23 bool "Add module symbols to kernel symbol table"
24 default n
25 depends on INSMOD && FEATURE_2_4_MODULES
26 help
27 By adding module symbols to the kernel symbol table, Oops messages
28 occuring within kernel modules can be properly debugged. By enabling
29 this feature, module symbols will always be added to the kernel symbol
30 table for properly debugging support. If you are not interested in
31 Oops messages from kernel modules, say N.
32
33config FEATURE_INSMOD_LOADINKMEM
34 bool "In kernel memory optimization (uClinux only)"
35 default n
36 depends on INSMOD && FEATURE_2_4_MODULES
37 help
38 This is a special uClinux only memory optimization that lets insmod
39 load the specified kernel module directly into kernel space, reducing
40 memory usage by preventing the need for two copies of the module
41 being loaded into memory.
42
43config FEATURE_INSMOD_LOAD_MAP
44 bool "Enable load map (-m) option"
45 default n
46 depends on INSMOD && ( FEATURE_2_4_MODULES || FEATURE_2_6_MODULES )
47 help
48 Enabling this, one would be able to get a load map
49 output on stdout. This makes kernel module debugging
50 easier.
51 If you don't plan to debug kernel modules, you
52 don't need this option.
53
54config FEATURE_INSMOD_LOAD_MAP_FULL
55 bool "Symbols in load map"
56 default y
57 depends on FEATURE_INSMOD_LOAD_MAP
58 help
59 Without this option, -m will only output section
60 load map. With this option, -m will also output
61 symbols load map.
62
63config RMMOD
64 bool "rmmod"
65 default n
66 help
67 rmmod is used to unload specified modules from the kernel.
68
69config LSMOD
70 bool "lsmod"
71 default n
72 help
73 lsmod is used to display a list of loaded modules.
74
75config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
76 bool "lsmod pretty output for 2.6.x Linux kernels "
77 default n
78 depends on LSMOD
79 help
80 This option makes output format of lsmod adjusted to
81 the format of module-init-tools for Linux kernel 2.6.
82
83config MODPROBE
84 bool "modprobe"
85 default n
86 help
87 Handle the loading of modules, and their dependencies on a high
88 level.
89
90 Note that in the state, modprobe does not understand multiple
91 module options from the configuration file. See option below.
92
93config FEATURE_MODPROBE_MULTIPLE_OPTIONS
94 bool
95 prompt "Multiple options parsing" if NITPICK
96 default y
97 depends on MODPROBE
98 help
99 Allow modprobe to understand more than one option to pass to
100 modules.
101
102 This is a WIP, while waiting for a common argument parsing
103 common amongst all BB applets (shell, modprobe, etc...) and
104 adds around 600 bytes on x86, 700 bytes on ARM. The code is
105 biggish and uggly, but just works.
106
107 Saying Y here is not a bad idea if you're not that short
108 on storage capacity.
109
110config FEATURE_MODPROBE_FANCY_ALIAS
111 bool
112 prompt "Fancy alias parsing" if NITPICK
113 default y
114 depends on MODPROBE && FEATURE_2_6_MODULES
115 help
116 Say 'y' here to enable parsing of aliases with underscore/dash
117 mismatch between module name and file name, along with bus-specific
118 aliases (such as pci:... or usb:... aliases).
119
120comment "Options common to multiple modutils"
121 depends on INSMOD || RMMOD || MODPROBE || LSMOD
122
123config FEATURE_CHECK_TAINTED_MODULE
124 # Simulate indentation
125 bool "Support tainted module checking with new kernels"
126 default y
127 depends on INSMOD || LSMOD
128 help
129 Support checking for tainted modules. These are usually binary
130 only modules that will make the linux-kernel list ignore your
131 support request.
132 This option is required to support GPLONLY modules.
133
134config FEATURE_2_4_MODULES
135 # Simulate indentation
136 bool "Support version 2.2.x to 2.4.x Linux kernels"
137 default y
138 depends on INSMOD || RMMOD || MODPROBE
139 help
140 Support module loading for 2.2.x and 2.4.x Linux kernels.
141
142config FEATURE_2_6_MODULES
143 # Simulate indentation
144 bool "Support version 2.6.x Linux kernels"
145 default y
146 depends on INSMOD || RMMOD || MODPROBE
147 help
148 Support module loading for newer 2.6.x Linux kernels.
149
150
151config FEATURE_QUERY_MODULE_INTERFACE
152 bool
153 default y
154 depends on FEATURE_2_4_MODULES && !FEATURE_2_6_MODULES
155
156
157endmenu
158
Note: See TracBrowser for help on using the repository browser.