Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (12 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/modutils/Config.in

    r821 r1770  
    66menu "Linux Module Utilities"
    77
    8 config CONFIG_INSMOD
     8config INSMOD
    99    bool "insmod"
    1010    default n
     
    1212      insmod is used to load specified modules in the running kernel.
    1313
    14 config CONFIG_FEATURE_INSMOD_VERSION_CHECKING
     14config FEATURE_INSMOD_VERSION_CHECKING
    1515    bool "Module version checking"
    1616    default n
    17     depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
     17    depends on INSMOD && FEATURE_2_4_MODULES
    1818    help
    1919      Support checking of versions for modules.  This is used to
    2020      ensure that the kernel and module are made for each other.
    2121
    22 config CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS
     22config FEATURE_INSMOD_KSYMOOPS_SYMBOLS
    2323    bool "Add module symbols to kernel symbol table"
    2424    default n
    25     depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
     25    depends on INSMOD && FEATURE_2_4_MODULES
    2626    help
    2727      By adding module symbols to the kernel symbol table, Oops messages
     
    3131      Oops messages from kernel modules, say N.
    3232
    33 config CONFIG_FEATURE_INSMOD_LOADINKMEM
     33config FEATURE_INSMOD_LOADINKMEM
    3434    bool "In kernel memory optimization (uClinux only)"
    3535    default n
    36     depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
     36    depends on INSMOD && FEATURE_2_4_MODULES
    3737    help
    3838      This is a special uClinux only memory optimization that lets insmod
     
    4141      being loaded into memory.
    4242
    43 config CONFIG_FEATURE_INSMOD_LOAD_MAP
     43config FEATURE_INSMOD_LOAD_MAP
    4444    bool "Enable load map (-m) option"
    4545    default n
    46     depends on CONFIG_INSMOD && CONFIG_FEATURE_2_4_MODULES
     46    depends on INSMOD && ( FEATURE_2_4_MODULES || FEATURE_2_6_MODULES )
    4747    help
    4848      Enabling this, one would be able to get a load map
     
    5252      don't need this option.
    5353
    54 config CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL
     54config FEATURE_INSMOD_LOAD_MAP_FULL
    5555    bool "Symbols in load map"
    5656    default y
    57     depends on CONFIG_FEATURE_INSMOD_LOAD_MAP
     57    depends on FEATURE_INSMOD_LOAD_MAP
    5858    help
    5959      Without this option, -m will only output section
     
    6161      symbols load map.
    6262
    63 config CONFIG_RMMOD
     63config RMMOD
    6464    bool "rmmod"
    6565    default n
     
    6767      rmmod is used to unload specified modules from the kernel.
    6868
    69 config CONFIG_LSMOD
     69config LSMOD
    7070    bool "lsmod"
    7171    default n
     
    7373      lsmod is used to display a list of loaded modules.
    7474
    75 config CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT
     75config FEATURE_LSMOD_PRETTY_2_6_OUTPUT
    7676    bool "lsmod pretty output for 2.6.x Linux kernels "
    7777    default n
    78     depends on CONFIG_LSMOD
     78    depends on LSMOD
    7979    help
    8080      This option makes output format of lsmod adjusted to
    8181      the format of module-init-tools for Linux kernel 2.6.
    8282
    83 config CONFIG_MODPROBE
     83config MODPROBE
    8484    bool "modprobe"
    8585    default n
     
    9191      module options from the configuration file. See option below.
    9292
    93 config CONFIG_FEATURE_MODPROBE_MULTIPLE_OPTIONS
    94     bool "Multiple options parsing"
     93config FEATURE_MODPROBE_MULTIPLE_OPTIONS
     94    bool
     95    prompt "Multiple options parsing" if NITPICK
    9596    default y
    96     depends on CONFIG_MODPROBE
     97    depends on MODPROBE
    9798    help
    9899      Allow modprobe to understand more than one option to pass to
     
    107108      on storage capacity.
    108109
     110config FEATURE_MODPROBE_FANCY_ALIAS
     111    bool
     112    prompt "Fancy alias parsing" if NITPICK
     113    default y
     114    depends on MODPROBE && FEATURE_2_6_MODULES
     115    help
     116      Say 'y' here to enable parsing of aliases with underscore/dash
     117      mismatch between module name and file name, along with bus-specific
     118      aliases (such as pci:... or usb:... aliases).
     119
    109120comment "Options common to multiple modutils"
    110     depends on CONFIG_INSMOD || CONFIG_RMMOD || CONFIG_MODPROBE || CONFIG_LSMOD
     121    depends on INSMOD || RMMOD || MODPROBE || LSMOD
    111122
    112 config CONFIG_FEATURE_CHECK_TAINTED_MODULE
     123config FEATURE_CHECK_TAINTED_MODULE
    113124    # Simulate indentation
    114125    bool "Support tainted module checking with new kernels"
    115126    default y
    116     depends on CONFIG_INSMOD || CONFIG_LSMOD
     127    depends on INSMOD || LSMOD
    117128    help
    118129      Support checking for tainted modules.  These are usually binary
     
    121132      This option is required to support GPLONLY modules.
    122133
    123 config CONFIG_FEATURE_2_4_MODULES
     134config FEATURE_2_4_MODULES
    124135    # Simulate indentation
    125136    bool "Support version 2.2.x to 2.4.x Linux kernels"
    126137    default y
    127     depends on CONFIG_INSMOD || CONFIG_RMMOD
     138    depends on INSMOD || RMMOD || MODPROBE
    128139    help
    129140      Support module loading for 2.2.x and 2.4.x Linux kernels.
    130141
    131 config CONFIG_FEATURE_2_6_MODULES
     142config FEATURE_2_6_MODULES
    132143    # Simulate indentation
    133144    bool "Support version 2.6.x Linux kernels"
    134145    default y
    135     depends on CONFIG_INSMOD || CONFIG_RMMOD || CONFIG_MODPROBE
     146    depends on INSMOD || RMMOD || MODPROBE
    136147    help
    137148      Support module loading for newer 2.6.x Linux kernels.
    138149
    139150
    140 config CONFIG_FEATURE_QUERY_MODULE_INTERFACE
     151config FEATURE_QUERY_MODULE_INTERFACE
    141152    bool
    142153    default y
    143     depends on CONFIG_FEATURE_2_4_MODULES && !CONFIG_FEATURE_2_6_MODULES
     154    depends on FEATURE_2_4_MODULES && !FEATURE_2_6_MODULES
    144155
    145156
Note: See TracChangeset for help on using the changeset viewer.