source: branches/3.2/mindi/mindi @ 3586

Last change on this file since 3586 was 3586, checked in by Bruno Cornec, 4 years ago

Improve man page accordingly with previour rev

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 126.4 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3586 2016-06-02 11:27:31Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=150000      # increase if you run out of ramdisk space
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi-Image -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143fi
144
145# Function to log on screen only
146LogScreen() {
147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
152}
153
154# Function to log in log file only
155LogFile() {
156
157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160        rm -f "$2"
161    fi
162}
163
164# Function to log in both screen and logfile
165LogAll() {
166    LogScreen "$1"
167    LogFile "$1" "$2"
168}
169
170# Last function called before exiting
171# Parameter is exit code value
172# Should be declared here as used immediately below potentialy
173MindiExit() {
174    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
175    LogFile "INFO: End date : `date`" 
176    if [ _"$MONDO_SHARE" != _"" ] ; then
177        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178        if [ -f $LOGFILE ]; then
179            cat $LOGFILE >> /var/log/mondoarchive.log
180        else
181            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
182        fi
183        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184    fi
185
186    cd /
187    sync&
188
189    # Clean temporary files only when standalone mindi
190    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191        rm -Rf $MINDI_TMP
192    fi
193    exit $1
194}
195
196Die() {
197    local i
198    if [ "$1" = "" ] ; then
199        LogAll "FATAL ERROR"
200    else
201        LogAll "FATAL ERROR. $1"
202    fi
203    if [ _"$2" != _"" ]; then
204        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
205    fi
206    rm -f "$2"
207
208    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
209    LogAll "See http://www.mondorescue.org for more information."
210    LogAll "WE CANNOT HELP unless you enclose that file.\n"
211    MindiExit -1
212}
213
214# Now we can create what we need
215MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
216if [ $? -ne 0 ]; then
217    df $TMPDIR
218    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
219fi
220if [ _"$MINDI_TMP" = _"" ]; then
221    Die "MINDI_TMP is empty, aborting"
222fi
223if [ _"$MINDI_TMP" = _"/" ]; then
224    Die "MINDI_TMP is /, aborting"
225fi
226export MINDI_TMP
227
228# ----------------------------------------------------------------------------
229
230
231AbortHere() {
232    [ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
233    Die "Program is terminating in response to signal received from OS/user"
234}
235
236
237Aborted() {
238    trap SIGHUP SIGTERM SIGTRAP SIGINT
239    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
240    Die "User abort."
241}
242
243
244AddFileToCfgIfExists() {
245    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
246}
247
248
249AddKeyboardMappingFile() {
250    local mappath r included_list included_item i res ii sss
251    mappath=$1
252    KBDEPTH=$(($KBDEPTH+1))
253    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
254    if [ -e "$bigdir/$mappath" ] ; then
255        LogFile "INFO: $mappath already added"
256        return
257    elif [ -d "$bigdir/$mappath" ] ; then
258        echo "Cannot add $mappath: it's a directory. Sorry."
259        return
260    fi
261    LogFile "INFO: Added kbd map $mappath"
262    if [ ! -e "$mappath" ] ; then
263        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
264        if [ ! -e "$mappath" ] ; then
265            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
266            return
267        fi
268    fi
269
270    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
271    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
272        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
273    else
274        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
275    fi
276    for included_item in $included_list ; do
277        if [ ! -e "$included_item" ] ; then
278            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
279            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
280            for ii in $sss ; do
281                [ -e "$ii" ] && AddKeyboardMappingFile $ii
282            done
283        else
284            AddKeyboardMappingFile $included_item
285        fi
286    done
287}
288
289
290CopyDependenciesToDirectory() {
291    local outdir incoming counter d found tdir templog
292    outdir=$1
293    templog=$MINDI_TMP/$$.log
294    mkdir -p $outdir
295    incoming=`ReadLine`
296    counter=$3
297    > $templog
298
299    while [ "$incoming" != "" ] ; do
300        if [ "$3" = "1" ]; then
301            counter=$(($counter+1))
302            LogProgress $counter $2
303        fi
304        # Non absolute file names should not arrive till here => skipped
305        if [ `echo "$incoming" | cut -c1` != '/' ]; then
306            LogAll "WARNING: Unable to handle $incoming"
307            incoming=`ReadLine`
308            continue
309        fi
310        # no parent directory of incoming should be a link, copy is not possible in that case
311        d=`dirname "$incoming"`
312        found="false"
313        while [ $d != "/" -a $found = "false" ]; do
314            [ -h "$d" ] && found="true"
315            d=`dirname "$d"`
316        done
317        if [ -d "$incoming" -a ! -h "$incoming" ]; then
318            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
319        elif [ -e "$incoming" ] && [ $found = "false" ]; then
320            if [ ! -h "$incoming" ]; then
321                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
322            else
323                tdir=`dirname "$incoming"`
324                if [ ! -e "$outdir/$tdir" ]; then
325                    mkdir -p "$outdir/$tdir"
326                fi
327                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
328            fi
329            # Only uncompress modules if not using udevd
330            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
331                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
332            fi
333            [ -x "$outdir" ] && StripExecutable $outdir
334        fi
335        incoming=`ReadLine`
336    done
337}
338
339
340CountItemsIn() {
341    local r
342    r=0
343    for q in $1 ; do
344        r=$(($r+1))
345    done
346    echo $r
347}
348
349
350DropOptimizedLibraries() {
351    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
352    filelist=$1
353    outdir=$2
354
355    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
356    if [ "$list_of_optimized_libraries" = "" ] ; then
357        return 0
358    fi
359    echo -en "Dropping i686-optimized libraries if appropriate"
360    for optimized_lib_name in $list_of_optimized_libraries ; do
361        echo -en "."
362        reason=""
363        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
364        echo "$vanilla_lib_name" >> $filelist
365        LogFile "INFO: Adding $vanilla_lib_name to filelist"
366        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
367        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
368
369        # This may return multiple files
370        for resolved in `mr-read-all-link $vanilla_lib_name`; do
371            LogFile "INFO: Adding as deps $resolved to filelist"
372            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
373            if [ "$vanilla_resolved_name" != "$resolved" ]; then
374                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
375                rmdir $outdir$resolved > /dev/null 2> /dev/null
376                ln -sf $vanilla_resolved_name $outdir$resolved
377                LogFile "INFO: Excluding deps $resolved" 
378                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
379                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
380                echo "$vanilla_resolved_name" >> $filelist.tmp
381                mv -f $filelist.tmp $filelist
382            fi
383        done
384    done
385    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
386    mv -f $filelist.tmp $filelist
387    echo -e "$DONE"
388}
389
390
391FindAndAddUserKeyboardMappingFile() {
392    local r res mapfile mappath included_item included_list keyfile mp locale
393    LogAll "INFO: Analyzing your keyboard's configuration."
394    KEYDIR=/usr/lib/kbd
395    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
396    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
397    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
398    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
399    if [ ! -e "$KEYDIR" ] ; then
400        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
401        return 0
402    else
403        LogFile "INFO: KEYDIR=$KEYDIR"
404    fi
405    if [ -e "/etc/sysconfig/keyboard" ] ; then
406        LogFile "INFO: Red Hat-style config detected."
407        keyfile=/etc/sysconfig/keyboard
408    elif [ -e "/etc/vconsole.conf" ] ; then
409        LogFile "INFO: New Fedora style config detected."
410        keyfile=/etc/vconsole.conf
411    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
412        LogFile "INFO: Slackware-style config detected."
413        keyfile=/etc/rc.d/rc.keymap
414    elif [ -e "/etc/rc.config" ] ; then
415        LogFile "INFO: Debian-style config detected."
416        keyfile=/etc/rc.config
417    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
418        LogFile "INFO: Debian-style config detected."
419        mkdir -p $bigdir/tmp
420        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
421        KBDEPTH=0
422        mkdir -p $bigdir/etc/console
423        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
424        echo ""
425        echo -e "$DONE"
426        return 0
427    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
428        LogFile "INFO: Ubuntu-style config detected."
429        mkdir -p $bigdir/tmp
430        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
431            kbdfile="/etc/console-setup/boottime.kmap.gz"
432        else
433            kbdfile="/etc/console-setup/cached.kmap.gz"
434        fi
435        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
436        KBDEPTH=0
437        mkdir -p $bigdir/etc/console-setup
438        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
439        echo ""
440        echo -e "$DONE"
441        return 0
442    elif [ -e "/etc/rc.conf" ] ; then
443        LogFile "INFO: ArchLinux config detected."
444        keyfile=/etc/rc.conf
445    elif [ -e "/etc/conf.d/keymaps" ] ; then
446        LogFile "INFO: Gentoo-style config detected."
447        keyfile=/etc/conf.d/keymaps
448    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
449        LogFile "INFO: X11-style config detected."
450        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
451    else
452        LogFile "Searching for rc.config ..."
453        keyfile=`find /etc -name rc.config | head -n1`
454        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
455            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
456            return
457        else
458            LogFile "INFO: Found $keyfile"
459        fi
460    fi
461    if [ ! -e "$KEYDIR/keymaps" ] ; then
462        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
463        return
464    fi
465    LogFile "INFO: keyfile=$keyfile"
466    # For SLES we need to remove the .map.gz extension Cf #614
467    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
468    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
469    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
470    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
471    LogFile "INFO: locale=$locale"
472    #
473    # Process the keymaps dir once for all
474    # AddKeyboardMappingFile will use it recursively
475    #
476    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
477    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
478    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
479    # For new distro such as RHEL 7 we need that additional search
480    [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
481    # If we have multiple keymaps then log it !!
482    echo "$mp" | grep -q " " >> $LOGFILE
483    if [ $? -eq 0 ]; then
484        LogAll "WARNING: Multiple keymaps found: $mp"
485        LogFile "INFO: The following one will be used"
486    fi
487    for i in $mp ; do
488        mappath=$i
489        [ -e "$i" ] && [ ! -d "$i" ] && break
490    done
491    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
492        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
493    fi
494    LogFile "INFO: mappath = $mappath"
495    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
496        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
497        return
498    fi
499    echo -en "INFO: Adding keyboard mapping tables"
500    mkdir -p $bigdir/tmp
501    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
502    KBDEPTH=0
503    AddKeyboardMappingFile $mappath
504    echo ""
505    echo -e "$DONE"
506    rm -f $MINDI_TMP/keymaps.find
507    return 0
508}
509
510
511FindLdlinux32Binary() {
512    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
513    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
514    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
515    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
517    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
518    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
519    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
520    if [ ! -e "$LDLINUXC32" ]; then 
521        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
522        LDLINUXC32=/tmp/idoesnthopefullyexist
523    else
524        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
525    fi
526}
527
528
529FindMboot32Binary() {
530    MBOOTC32=/usr/lib/syslinux/mboot.c32
531    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
532    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
533    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
536    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
537    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
538    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
539    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
540}
541
542FindLdlinuxe64Binary() {
543    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
544    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
545    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
546    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
548    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
549    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
550    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
551    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
552}
553
554FindSyslinux64EFI() {
555    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
556    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
557    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
558    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
560    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
561    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
562    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
563    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
564}
565
566FindIsolinuxBinary() {
567    ISOLINUX=/usr/lib/isolinux.bin
568    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
569    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
570    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
573    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
574    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
575    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
576    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
577}
578
579
580GenerateGiantDependencyList() {
581    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
582
583    echo -en "INFO: Analyzing dependency requirements"
584    outfile=$1
585    tempfile=$MINDI_TMP/$$.txt
586    incoming=`ReadLine`
587
588    > $tempfile
589    progress=0
590    res=0
591    noof_lines=$2
592    while [ "$incoming" != "" ] ; do
593        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
594            incoming=`ReadLine`
595            continue
596        fi
597        if [ "$incoming" = "LVMFILES:" ] ; then
598            break
599        fi
600        filelist=`GenerateListForFile "$incoming"`
601        r=$?
602        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
603        res=$(($res+$r))
604#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
605        for fname in $filelist ; do
606            [ "$fname" != "" ] && echo "$fname" >> $tempfile
607        done
608        progress=$(($progress+1))
609        LogProgress $progress $noof_lines
610        incoming=`ReadLine`
611    done
612    if  [ "$incoming" = "LVMFILES:" ] ; then
613        incoming=`ReadLine`
614        lvmversion=""
615        while [ "$incoming" != "" ] ; do
616            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
617                incoming=`ReadLine`
618                continue
619            fi
620            filelist=`GenerateListForFile "$incoming"`
621            for tool in $filelist ; do
622                lvmresolved=`readlink -f $tool`
623                if [ "$tool" = "$lvmresolved" ]; then
624                    echo "$tool" >> $tempfile
625                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
626                    if [ "$lvmversion" = "" ] ; then
627                        lvmversion=`$lvmresolved`
628                        echo "$lvmresolved" >> $tempfile
629                    fi
630                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
631                    if [ "$lvmversion" = "200" ]; then
632                        # pvdata and lvmcreate_initrd don't exist in LVM2
633                        case "$toolstripped" in
634                        "pvdata")
635                            continue
636                            ;;
637                        "lvmcreate_initrd")
638                            continue
639                            ;;
640                        esac
641                    fi
642                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
643                    if [ -e "$toolpath" ] ; then
644                        echo "$toolpath" >> $tempfile
645                        echo "$tool" >> $tempfile
646                    else
647                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
648                    fi
649                    if [ -e "$toolpath" ] ; then
650                        echo "$toolpath" >> $tempfile
651                        echo "$tool" >> $tempfile
652                    else
653                        echo "Where are your LVM-Tools? Couldn't find $tool"
654                    fi
655                else
656                    echo "$tool" >> $tempfile
657                fi
658            done
659            progress=$(($progress+1))
660            LogProgress $progress $noof_lines
661            incoming=`ReadLine`
662        done
663    fi
664    echo -en "$DONE\nINFO: Making complete dependency list"
665
666    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
667    mv -f $tempfile.new $tempfile
668    > $outfile.pre
669    progress=0
670    noof_lines=`cat $tempfile | wc -l`
671    LogFile "---------------------------------"
672    LogFile "List of dependencies:             "
673    LogFile "---------------------------------"
674    for fname in `cat $tempfile` ; do
675        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
676        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
677        progress=$(($progress+1))
678        LogProgress $progress $noof_lines
679    done
680    if [ _"$MONDO_SHARE" != _"" ]; then
681        mkdir -p $bigdir/tmp
682        mkdir -p $bigdir/usr/bin
683        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
684            LogAll "\nINFO: Incorporating post-nuke tarball"
685            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
686        fi
687        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
688            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
689        else
690            LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
691            LogAll "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
692            LogAll "       If Mindi was called by Mondo then send a bug report."
693            LogAll "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
694            LogAll "       Finally, run Mindi again."
695            Die "Odd."
696        fi
697        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
698        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
699            LogAll "\nINFO: Incorporating Network-related settings"
700            for r in NETFS-* ; do
701                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
702                LogFile "INFO: Copying $r to ramdisk"
703            done
704        fi
705    fi
706    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
707    rm -f $tempfile $outfile.pre
708    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
709    return $res
710}
711
712
713GenerateListForFile() {
714    local files_found loc fname incoming i res
715    incoming="$1"
716    files_found=""
717    res=0
718
719    for fname in $incoming ; do
720        files_found="$files_found `LocateFile $fname`"
721    done
722
723    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
724}
725
726
727# Returns all disk devices which are part of a raid array
728GetAllRaidMembers() {
729    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
730}
731
732
733GetFileSizeList() {
734    local i
735    for i in `find $1 -type d -o -print` ; do
736        du -sk $i
737    done
738}
739
740
741# Check kernel filesystem capabilites for accessing initrd image
742# Could be ext2 FS (old mode) or initramfs (new mode)
743#
744# Interface definition:
745# param #1: absolute path to kernel image
746GetInitrdFilesystemToUse() {
747
748    # interface test: make sure we have one parameter
749    if [ $# -ne 1 ]; then
750        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
751    fi
752
753    # interface parameters
754    local lvKernelImage=$1
755
756    # local constants (filesystem magic strings)
757    local lcMagicCramfs="<3>cramfs: wrong magic"
758    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
759    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
760    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
761
762    # local variables
763    local lvOffset
764    local lvScanRes
765    local lvUseFilesystem
766
767    # say where we are.
768    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
769
770    # verify that file exists
771    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
772
773    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
774    file $lvKernelImage 2>&1 | grep -q gzip
775    if [ $? -eq 0 ]; then
776        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
777        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
778    else
779        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
780        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
781        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
782        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
783        if [ $lvOffset -eq 0 ]; then
784            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
785            lvScanRes=$lcMagicInitfs
786        else
787            lvOffset=`expr $lvOffset / 2`
788            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
789            # scan again  kernel image
790            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
791        fi
792    fi
793
794    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
795    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
796        lvUseFilesystem="ext2fs"
797    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
798        lvUseFilesystem="ext3fs"
799    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
800        lvUseFilesystem="initramfs"
801    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
802        lvUseFilesystem="cramfs"
803    else
804        # In that case, we are most probably after 2.6.30 and use the supported initramfs
805        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
806        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
807        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
808        lvUseFilesystem="initramfs"
809    fi
810
811    # say what we are using
812    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
813
814    # return file system to use
815    echo "$lvUseFilesystem"
816
817}
818
819# Searches members of raid device
820# $1: raid device (/dev/md...)
821GetRaidDevMembers() {
822    if [ ! -f /etc/raidtab ]; then 
823        return
824    fi
825    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
826}
827
828
829ListAllPartitions() {
830    local res currline partition all_partitions ap_orig remaining i j
831
832    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
833    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
834    if [ -e "/vmfs/volumes" ]; then
835        # For VMWare ESX 3 get the device names of these volumes
836        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
837    fi
838    return
839}
840
841
842ListKernelModulePaths() {
843    local module_list module fname r kern
844    module_list="$MODULES"
845    # Remove unwanted modules from list
846    for i in $DENY_MODS; do
847        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
848    done
849###
850### Sq-Modification ... Use kernelname for module search path if specified
851###
852    if [ "${kernelname}" != "" ]
853    then
854        kern=${kernelname}
855    else
856        kern="$KERVERRUN"
857    fi
858    export KERVER=$kern
859###
860### Sq-Mod End
861###
862    # Get rid of duplicates
863    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
864        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
865        if [ -z "$r" ]; then
866            if [ "`echo "$MODULES" | grep -w $module`" ]; then
867                r="[live module file not found]"
868            else
869                r="[extra module file not found]"
870            fi
871        else
872            [ -f "$r" ] && echo "$r"
873        fi
874        LogFile "INFO: module $module --> $r"
875    done
876    find /lib/modules/$kern/modules.* -type f 2> /dev/null
877}
878
879#
880# Critical function which computes all dependencies (dyn. lib.)
881# for a list of binaries
882#
883LocateDeps() {
884    local incoming fname deps
885    incoming="$*"
886    deps=""
887
888    for fname in $incoming ; do
889        if [ ! -e "$fname" ] ; then
890            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
891            if echo $fname | grep lvm &> /dev/null ; then
892                LogFile "          This warning only affects you if you are using LVM."
893                if echo "$MODULES" | grep lvm &> /dev/null ; then
894                    LogFile "          I think you are, so please take heed!"
895                else
896                    LogFile "          I don't think you are, so don't worry about it."
897                fi
898            fi
899        else
900            deps="$deps $fname" 
901        fi
902    done
903    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
904}
905
906
907LocateFile() {
908    local i j path fname_to_find location output resolved tmp stub cache_id loclist
909    fname_to_find="$1"
910    # It's an absolute path
911    j=`echo "$fname_to_find" | cut -c1`
912    if [ _"$j" = _"/" ]; then
913        dn=`dirname $fname_to_find`
914        # We suppose that the link is already included, just add the new file
915        if [ -h "$dn" ]; then
916            newdn=`readlink -f $dn`
917            bn=`basename $fname_to_find`
918            output="$newdn/$bn"
919        else
920            output="$fname_to_find"
921        fi
922        if [ -h "$output" ] ; then
923            output="`mr-read-all-link $output` $output"
924        fi
925        echo "$output"
926        return 0
927    fi
928    # It's not an absolute path
929    output=""
930    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
931    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
932        [ -h "$path" ] && continue
933        [ ! -e "$path/$fname_to_find" ] && continue
934        output="$path/$fname_to_find $output"
935        if [ -h "$path/$fname_to_find" ] ; then
936            output="`mr-read-all-link $path/$fname_to_find` $output"
937        fi
938    done
939    if [ "$output" = "" ] ; then
940        return 1
941    fi
942    echo "$output"
943    return 0
944}
945
946LogProgress() {
947    local i progress modres noof_lines title
948 
949    progress=$1
950    noof_lines=$2
951    title=$3
952
953    i=$(($progress*100))
954    if [ $noof_lines -ne 0 ]; then
955        i=$(($i/$noof_lines))
956    else
957        i=0
958    fi
959
960    if [ _"$MONDO_SHARE" != _"" ]; then 
961        echo "$title        $i%"
962    else
963        echo -en "\r\t\t\t\t\t\t\t\t"
964        echo -en "$i"
965        echo -en "%"
966        modres=$(($progress%4))
967        [ "$modres" -eq "0" ] && echo -en "\t/"
968        [ "$modres" -eq "1" ] && echo -en "\t-"
969        [ "$modres" -eq "2" ] && echo -en "\t\\"
970        [ "$modres" -eq "3" ] && echo -en "\t|"
971    fi
972}
973
974# Called by MakeBootInitFile, to make /tmp/$MRCFG
975MakeMondoConfigFile() {
976    local outfile use_lzo use_comp use_star
977    outfile=$1
978    > $outfile
979    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
980    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
981    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
982    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
983    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
984    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
985    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
986    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
987    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
988    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
989    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
990    echo "use-lzo $use_lzo" >> $outfile
991    echo "use-gzip $use_gzip" >> $outfile
992    echo "use-star $use_star" >> $outfile
993    echo "use-lzma $use_lzma" >> $outfile
994    echo "use-comp $use_comp" >> $outfile
995    echo "boot-type $BOOT_TYPE" >> $outfile
996    echo "datestamp `date`" >> $outfile
997    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
998    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1011
1012    # Deal with network configuration in a portable way
1013    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1014        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1015    fi
1016}
1017
1018# Get PV's for an LV
1019GetPVsForLV() {
1020    if [ -n "$1" ]; then
1021        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1022        if [ -z "$vg" ]; then
1023            return
1024        fi
1025        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1026    fi
1027}
1028
1029
1030MakeMountlist() {
1031    local mountlist all_partitions current_partition \
1032partition_size partition_format outstring partition_number \
1033partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1034absolute_partition old_partition_fmt current_lvolume uname skip
1035
1036    LogFile "------------------------------------"
1037    LogFile "INFO: Your raw fstab file looks like this:"
1038    LogFile "------------------------------------"
1039    cat $MY_FSTAB >> $LOGFILE
1040    LogAll "-----------------------------------"
1041    LogAll "INFO: Your mountlist will look like this:"
1042    LogAll "-----------------------------------"
1043
1044# mountlist(OUT)
1045    mountlist=$1
1046
1047# NB: partition = device
1048# NB: mountpt = where the device is mounted
1049
1050    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1051
1052    [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1053    > $mountlist
1054    all_partitions=""
1055   
1056    if [ $LVM != "false" ]; then
1057        LogFile "INFO: Analyzing LVM..."
1058        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1059        if [ $? -ne 0 ]; then
1060            LVM="false"
1061        fi
1062        # Excluded LVs and GVs are not reported here
1063        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1064    fi
1065    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1066    for i in $IMAGE_DEVS ; do
1067        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1068    done
1069    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1070    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1071    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1072    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1073    for c_p in $all_partitions ; do
1074        # Skip fd/cd devices, network FS, cifs
1075        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1076        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1077        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1078            current_partition=`readlink -f $c_p`
1079            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1080                current_partition="$c_p"
1081            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1082                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1083                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1084            fi
1085            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1086        else
1087            current_partition="$c_p"
1088        fi
1089        [ "$c_p" = "none" ] && continue
1090        redhat_label=""
1091        label=""
1092        uuid=""
1093        absolute_partition=`readlink -f $c_p`
1094        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1095
1096        # set default in case we dont't find it
1097        str_to_find_fmt_with=$current_partition
1098
1099        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1100        # current_partition contains only first column of /etc/fstab
1101        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1102            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1103            actual_dev=""
1104
1105            # 1st try, findfs - the RHEL way of finding labels and their partitions
1106            if [ -x "/sbin/findfs" ]; then
1107                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1108            fi
1109   
1110            # 2nd try : blkid, the good way for all LABEL except swap
1111            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1112                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1113                # For LVM FS it will give a /dev/dm-# which should then be converted
1114                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1115                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1116                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1117                    for dev in `ls /dev/mapper/*`; do
1118                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1119                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1120                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1121                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1122                            break
1123                        fi
1124                    done
1125                fi
1126            fi
1127   
1128            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1129            # For LVM gives a /dev/mapper entry
1130            if [ "x$actual_dev" = "x" ]; then
1131                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1132            fi
1133   
1134            # 4th try, with vol_id
1135            # SWAP only
1136            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1137                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1138                for dev_swap in $list_swaps ; do
1139                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1140                    if [ "x$dev_exists" != "x" ]; then
1141                        actual_dev=$dev_swap
1142                        break;
1143                    fi
1144                done
1145            fi
1146
1147            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1148            # LABEL=SW-cciss/c0d0p3 (RDP)
1149            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1150            # SWAP only
1151            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1152                    skip=""
1153                    uname=$KERVERRUN
1154                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1155                    # 2.6.12 needs 16 (FC3)
1156                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1157                    # 2.6.19 and upper needs 1052
1158                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1159                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1160                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1161                    if [ $skip = "" ]; then
1162                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1163                    fi
1164                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1165                    do
1166                        # Location of the swap label for kernel 2.6
1167                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1168                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1169                            actual_dev=$try_dev
1170                        fi
1171                    done
1172            fi
1173
1174            # Check if one of all those tries has known success
1175            if [ "x$actual_dev" != "x" ]; then
1176                current_partition=$actual_dev
1177            else
1178                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1179            fi
1180        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1181        # current_partition contains only first column of /etc/fstab
1182        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1183            uuid=`echo "$current_partition" | cut -d'=' -f2`
1184            actual_dev=""
1185
1186            # 1st try, findfs - the RHEL way of finding labels and their partitions
1187            if [ -x "/sbin/findfs" ]; then
1188                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1189            fi
1190   
1191            # 2nd try : blkid, the good way for all UUID except swap
1192            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1193                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1194                # For LVM FS it will give a /dev/dm-# which should then be converted
1195                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1196                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1197                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1198                    for dev in `ls /dev/mapper/*`; do
1199                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1200                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1201                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1202                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1203                            break
1204                        fi
1205                    done
1206                fi
1207            fi
1208   
1209            # 3th try, with vol_id
1210            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1211                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1212                for dev in $list_dev ; do
1213                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1214                    if [ "x$dev_exists" != "x" ]; then
1215                        actual_dev=$dev
1216                        break;
1217                    fi
1218                done
1219            fi
1220
1221            # 4th try, with dumpuuid (VMWare only ?) for swap
1222            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1223                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1224                for dev in $list_dev ; do
1225                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1226                    if [ "x$dev_exists" != "x" ]; then
1227                        actual_dev=$dev
1228                        break;
1229                    fi
1230                done
1231            fi
1232
1233            # Check if one of all those tries has known success
1234            if [ "x$actual_dev" != "x" ]; then
1235                current_partition=$actual_dev
1236            else
1237                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1238            fi
1239        else
1240            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1241            # they use symlinks in fstab unrelated to what is shown in mount !
1242            if [ _"$partition_mountpt" = _"" ]; then
1243                # set default in case we dont't find it
1244                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1245                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1246                            str_to_find_fmt_with=$tmpp
1247                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1248                            break;
1249                        fi
1250                done
1251            fi
1252        fi
1253
1254        # Detects noauto partitions not mounted and exclude them
1255        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1256        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1257                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1258            continue
1259        fi
1260        # Detects bind partitions and exclude them
1261        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1262                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1263            continue
1264        fi
1265
1266        # Look for devices which have to be excluded
1267        skip=0
1268        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1269            l=""
1270            list_of_devices="`mr-read-all-link $current_partition`"
1271            for d in $list_of_devices; do
1272                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1273            done
1274
1275            # Remove PVs from LVs excluded
1276            l="$l `GetPVsForLV $current_partition`"
1277
1278            # We want a single unique list
1279            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1280
1281            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1282                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1283                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1284                    skip=1
1285                    continue
1286                fi
1287            done
1288        fi
1289        if [ $skip -eq 1 ]; then
1290            continue
1291        fi
1292
1293        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1294        # Detects iso9660 ISO images and exclude them
1295        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1296                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1297            continue
1298        fi
1299        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1300        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1301        # the former is then a link to the latter, so we test whether
1302        # $current_partition is actually such a link or not and set
1303        # $current_lvolume accordingly. On Debian you may find more than one answer
1304        # so we remove the one corresponding to /dev/.static
1305        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1306        # principle is the same and we need to find the link to it as well.
1307        # Note that $current_lvolume may well be an
1308        # ordinary device. It is just to make sure that we feed the right value
1309        # into any of the LVM tools if possible.
1310
1311        current_lvolume="$current_partition"
1312        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1313            # .static dir are a Debian specificity
1314            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1315            echo $current_lvolume | grep -q ' '
1316            if [ $? -eq 0 ]; then
1317                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1318            fi
1319            # if it's not found, it may well be a real device such as a multipath one
1320            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1321            if [ _"$current_lvolume" = _"" ]; then
1322                current_lvolume="$current_partition"
1323            fi
1324        fi
1325        #
1326        # End of LVM device style variation code (other than $current_lvolume).
1327
1328        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1329            # Size computed via LVM not directly
1330            partition_size="lvm"
1331        else
1332            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1333            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1334            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1335                # Skip swap files
1336                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1337                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1338                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1339                [ "$partition_format" != "swap" ] && partition_format="swap"
1340                if [ "$partition_size" = "" ] ; then
1341                    totalsize=0
1342                    items=0
1343                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1344                        totalsize=$(($totalsize+$i))
1345                        items=$(($items+1))
1346                    done
1347                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1348                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1349                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1350                fi
1351            else
1352                partition_size=`SizeOfPartition $current_partition`
1353            fi
1354        fi
1355        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1356        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1357        if [ "$partition_mountpt" = "" ] ; then
1358            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1359                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1360                    partition_mountpt="raid"
1361                    partition_format="raid"
1362                else
1363                    partition_mountpt="lvm"
1364                    partition_format="lvm"
1365                fi
1366            fi
1367        fi
1368        psz=$partition_size
1369        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1370        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1371        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1372            partition_mountpt="image"
1373            old_partition_fmt=$partition_format
1374            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1375            partition_size=$(($partition_size+1)); # just in case
1376            if [ "$partition_format" = "Linux" ] ; then
1377                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1378                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1379                partition_format=$old_partition_fmt
1380            fi
1381        fi
1382
1383        if [ ! "$partition_mountpt" ] ; then
1384            LogFile "------- $FDISK -l $qq log ------------"
1385            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1386                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1387                [ "$partition_format" ] && break
1388            done
1389            LogFile "------- $FDISK log end ------------"
1390            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1391                partition_format="compaq"
1392            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1393                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1394                continue
1395            fi
1396        fi
1397        if [ "$redhat_label" ]; then
1398            label="$redhat_label"
1399        elif [ "$uuid" ]; then
1400            label="$uuid"
1401        fi
1402
1403        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1404        # in order to mount the root part e.g. in grub.
1405        # One way to solve this is to add the UUID now, if there wasn't one so it's
1406        # restored correctly
1407        if [ _"$label" = _"" ]; then
1408            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1409        fi
1410
1411        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1412        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1413        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1414        if [ "$current_partition" = "" ] ; then
1415            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1416        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1417            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1418                partition_mountpt=raid
1419                partition_format=raid
1420                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1421                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1422            else
1423                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1424            fi
1425        elif [ "$partition_format" = "" ] ; then
1426            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1427        elif [ "$partition_size" = "" ] ; then
1428            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1429        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1430            continue
1431        else
1432            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1433            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1434                partition_format="vfat"
1435            fi
1436            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1437            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1438        fi
1439    done
1440    LogAll "-----------------------------------" 
1441}
1442
1443CheckMountlist() {
1444    local file=$1
1445    # Coherency verification
1446    ML01=`cat $file | wc -l`
1447    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1448    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1449    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1450    if [ "$ML01" -ne "$ML1" ]; then
1451        LogFile "--------------------------------------------"
1452        LogAll "WARNING: Duplicate device entry in mountlist"
1453        LogFile "--------------------------------------------"
1454    fi
1455    if [ "$ML02" -ne "$ML2" ]; then
1456        LogFile "--------------------------------------------"
1457        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1458        LogFile "------------------------------------------------"
1459    fi
1460}
1461
1462
1463MakeISOErrors() {
1464
1465LogFile "----------- $ISO_CMD's errors --------------"
1466LogAll "$ISO_CMD returned the following errors:"
1467cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1468LogAll "ERROR: Failed to create ISO image."
1469}
1470
1471MakeISO() {
1472
1473LogAll "INFO: Invoking $CMD ."
1474(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1475if [ $? -ne 0 ] ; then
1476    if [ "$BOOT_TYPE" = "UEFI" ]; then
1477        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1478        LogAll "INFO: Invoking instead $CMD"
1479        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1480        if [ $? -eq 0 ] ; then
1481            LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1482        else
1483            MakeISOErrors
1484        fi
1485    else
1486        MakeISOErrors
1487    fi
1488else
1489    LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1490fi
1491rm -f $MINDI_TMP/mkisofs.log
1492}
1493
1494MakeBootableDevice() {
1495
1496local target tbc retval part size mount_opt
1497
1498target="$1"
1499
1500rm -Rf $MINDI_TMP/target
1501mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1502
1503LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1504cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1505for i in memdisk memtest.bin memtest.img ; do
1506    j=$MINDI_LIB/$i
1507    k=$MINDI_TMP/target
1508    if [ -e "$j" ] ; then
1509        LogAll "INFO: Copying $j to $k"
1510        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1511        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1512        if [ _"$MONDO_SHARE" != _"" ]; then 
1513            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1514        fi
1515    fi
1516done
1517
1518retval=0
1519LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1520cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1521if [ $? -ne 0 ] ; then
1522    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1523    retval=$(($retval+1))
1524fi
1525LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1526cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1527if [ $? -ne 0 ] ; then
1528    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1529    retval=$(($retval+1))
1530fi
1531
1532# copy boot stuff now generated in PrepareDataDiskImage
1533if [ "$BOOT_TYPE" = "UEFI" ]; then
1534    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1535    tbc="EFI"
1536    # Also prepare a BIOS compatible boot
1537    if  [ "$target" = "ISO" ]; then
1538        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1539    fi
1540else
1541    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1542    tbc="syslinux"
1543    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1544        LogFile "----------- syslinux's conf --------------"
1545        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1546        LogFile "------------------------------------------"
1547    fi
1548    if  [ "$target" = "ISO" ]; then
1549        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1550        if [ $? -ne 0 ] ; then
1551            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1552            retval=$(($retval+1))
1553        fi
1554    fi
1555fi
1556
1557if [ "$ARCH" != "ia64" ] ; then
1558    if [ $KERNEL_IS_XEN = "yes" ]; then
1559        FindMboot32Binary
1560        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1561        if [ $? -ne 0 ] ; then
1562            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1563            retval=$(($retval+1))
1564        fi
1565        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1566        if [ $? -ne 0 ] ; then
1567            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1568            retval=$(($retval+1))
1569        fi
1570    fi
1571fi
1572
1573MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1574
1575if [ _"$MONDO_SHARE" != _"" ]; then 
1576    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1577    if [ $? -ne 0 ] ; then
1578        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1579        LogAll "       Please check the target directory."
1580        retval=$(($retval+1))
1581    fi
1582    if [ $KERNEL_IS_XEN = "yes" ]; then
1583        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1584        if [ $? -ne 0 ] ; then
1585            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1586            LogAll "       Please check the target directory."
1587            retval=$(($retval+1))
1588        fi
1589    fi
1590    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1591    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1592    if [ $? -ne 0 ] ; then
1593        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1594        LogAll "       Please check the target directory."
1595        retval=$(($retval+1))
1596    fi
1597    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1598    if [ $? -ne 0 ] ; then
1599        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1600        LogAll "       Please check the target directory."
1601        retval=$(($retval+1))
1602    fi
1603fi
1604
1605if [ -f "$MINDI_TMP/$MRCFG" ]; then
1606    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1607fi
1608
1609LogFile "----------- target dir content -----------"
1610LogFile "------------------------------------------"
1611ls -lR $MINDI_TMP/target >> $LOGFILE
1612LogFile "------------------------------------------"
1613LogFile "----------- target dir sizes -------------"
1614du -sk $MINDI_TMP/target/* >> $LOGFILE
1615LogFile "------------------------------------------"
1616
1617if [ "$retval" -ne "0" ] ; then
1618    LogFile "--------------------------------"
1619    LogFile "INFO: Size of $MINDI_TMP/target:"
1620    du -sk $MINDI_TMP/target/* >> $LOGFILE
1621    LogFile "--------------------------------"
1622    echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1623    sync
1624    umount $MINDI_TMP/target
1625    LogAll "ERROR: Problems while creating boot media."
1626    LogAll "       Please unload some of your modules and try again."
1627    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1628fi
1629
1630mkdir -p $MINDI_TMP/mpt
1631
1632if  [ "$target" = "USB" ]; then
1633    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1634    LogAll "INFO: Checking $USBDEVICE"
1635    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1636    if [ $? -ne 0 ]; then
1637        LogAll "ERROR: Unable to access $USBDEVICE"
1638        LogAll "       Make sure your USB device is plugged in"
1639        MindiExit -1
1640    fi
1641    # Some distro do auto mount at that point (Ubuntu)
1642    LogAll "INFO: Unmounting $USBPART just in case"
1643    sync
1644    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1645    if [ "$BOOT_TYPE" = "BIOS" ]; then
1646        # If your key has no MBR it may cause an issue
1647        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1648        if [ -r $MBRFILE ]; then
1649            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1650            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1651        else
1652            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1653            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1654        fi
1655    fi
1656    LogAll "INFO: Preparing $USBDEVICE"
1657    cat > $MINDI_TMP/fdisk.txt << EOF
1658d
1659d
1660d
1661d
1662n
1663p
16641
1665
1666
1667t
1668b
1669a
16701
1671w
1672EOF
1673    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1674    if [ $? -ne 0 ]; then
1675        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1676        LogAll "       Make sure your USB device is plugged in"
1677        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1678        MindiExit -1
1679    fi
1680    LogFile "fdisk build file"
1681    LogFile "----------------"
1682    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1683    LogFile "----------------"
1684    rm -f $MINDI_TMP/fdisk.txt
1685    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1686    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1687    # Calling kpartx in case devices were not created
1688    if [ -x "/sbin/kpartx" ]; then
1689        /sbin/kpartx -a $USBDEVICE
1690    fi
1691    # Some distro do auto mount at that point (Ubuntu)
1692    LogAll "INFO: Unmounting $USBPART just in case again"
1693    sync
1694    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1695    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1696    if [ "`which dmsetup`" != "" ]; then
1697        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1698        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1699            LogAll "INFO: Removing $block_id from device mapper."
1700            sleep 1
1701            dmsetup remove $block_id
1702        fi
1703    fi
1704    part=$USBPART
1705    mount_opt=""
1706else
1707    # ISO image
1708    part=$MINDI_TMP/mindi-bootroot.img
1709    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1710    # Adds 10 MB to allow for additional space
1711    size=$(($size+10000))
1712    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1713    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1714    mount_opt="-o loop"
1715fi
1716
1717LogAll "INFO: Creating a vfat filesystem on $part"
1718
1719mkfs.vfat $part 2>&1 >> $LOGFILE
1720if [ $? -ne 0 ]; then
1721    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1722    if  [ "$target" = "USB" ]; then
1723        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1724        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1725    fi
1726    MindiExit -1
1727fi
1728if  [ "$target" = "ISO" ]; then
1729    if [ "$BOOT_TYPE" = "BIOS" ]; then
1730        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1731        # and run after the formating for versions > 6 it seems
1732        syslinux $part >> $LOGFILE 2>> $LOGFILE
1733    fi
1734fi
1735LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1736mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1737if [ $? -ne 0 ]; then
1738    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1739    if  [ "$target" = "USB" ]; then
1740        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1741        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1742    fi
1743    MindiExit -1
1744fi
1745
1746LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1747mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1748if [ $? -ne 0 ] ; then
1749    LogFile "--------------------------------"
1750    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1751    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1752    LogFile "--------------------------------"
1753    sync
1754    umount $MINDI_TMP/mpt
1755    LogAll "ERROR: Problems while creating boot media."
1756    LogAll "       Please unload some of your modules and try again."
1757    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1758fi
1759
1760if  [ "$target" = "ISO" ]; then
1761    if [ "$ARCH" != "ia64" ]; then
1762        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1763    fi
1764    # ISO
1765    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1766        CMD="$ISO_CMD $ISO_OPT"
1767        MakeISO
1768    else
1769        if [ "$ARCH" = "ia64" ]; then
1770            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1771        else
1772            # UEFI
1773            echo "$CMD" | grep -q "xorriso"
1774            if [ $? -eq 0 ]; then
1775                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
1776            else
1777                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1778            fi
1779        fi
1780    fi
1781fi
1782
1783# Avoids graphical tool to keep the FS mounted
1784sync
1785umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1786
1787if  [ "$target" = "ISO" ]; then
1788    cp $part $MINDI_CACHE
1789    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
1790        # We just need the EFI dir and the boot image for this case
1791        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1792        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1793        # We need again the kernel+initrd at the root for UEFI boot at least
1794        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1795        # We need the boot image now and what mindi needs at restore time as well
1796        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1797        # Avoids graphical tool to keep the FS mounted
1798        sync
1799        umount $MINDI_TMP/mpt2
1800        LogFile "----------- target dir content -----------"
1801        LogFile "------------------------------------------"
1802        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1803        LogFile "------------------------------------------"
1804        MakeISO
1805    fi
1806else
1807    # USB
1808    if [ "$ARCH" != "ia64" ] ; then
1809        syslinux -v 2>&1 | grep -q 4.02
1810        if [ $? -eq 0 ]; then
1811            # This buggy version of syslinux requires a call to --stupid and not -s
1812            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1813            res=$?
1814        else
1815            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1816            res=$?
1817        fi
1818        if [ $res -ne 0 ] ; then
1819            LogAll "----------- syslinux's errors --------------"
1820            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1821            LogAll "------------------------------------------"
1822            LogAll "ERROR: Failed to create USB image."
1823        else
1824            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1825        fi
1826        rm -f $MINDI_TMP/syslinux.log
1827    else
1828        LogAll "ERROR: No USB boot support for ia64"
1829        MindiExit -1
1830    fi
1831fi
1832}
1833
1834
1835OfferToMakeBootableUSB() {
1836
1837local i files
1838
1839if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1840    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1841    read i
1842    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1843    if [ "$USBDEVICE" = "" ]; then
1844        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1845        read dev
1846        USBDEVICE=$dev
1847    fi
1848    echo "WARNING: This will erase all content on $USBDEVICE"
1849    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1850    read i
1851    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1852else
1853    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1854        Die "No USBDEVICE environment variable declared, aborting"
1855    fi
1856fi
1857USBPART="${USBDEVICE}1"
1858
1859MakeBootableDevice USB
1860}
1861
1862
1863OfferToMakeBootableISO() {
1864
1865local i files
1866
1867if [ -z "$ISO_CMD" ]; then
1868    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1869    return
1870fi
1871
1872if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1873    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1874    read i
1875    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1876fi
1877
1878MakeBootableDevice ISO
1879
1880}
1881
1882
1883MakeMessageFile() {
1884   
1885    if [ -x "/bin/lsb_release" ]; then
1886        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1887    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1888        DESC="Arch Linux"
1889        if [ -r /var/log/pacman.log ]; then
1890            # there are no releases but we can get the last system upgrade
1891            # Output example:   Arch Linux [2011-03-03 01:39]
1892            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1893        fi
1894    elif [ -x "/etc/os-release" ]; then
1895        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1896    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1897        # For pb >= 0.9.8
1898        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1899    elif [ -r /etc/issue.net ]; then
1900        DESC=`head -1 /etc/issue.net`
1901    elif [ -r /etc/issue ]; then
1902        DESC=`head -1 /etc/issue`
1903    else
1904        DESC="Unknown desc"
1905    fi
1906    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1907    if [ _"$MONDO_SHARE" != _"" ]; then
1908        if [ "$CDRECOVERY" != "yes" ] ; then
1909            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1910                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1911                echo -en "$BOOT_MEDIA_MESSAGE"
1912            elif [ ! "$MINDI_TMP" ] ; then
1913                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1914                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1915                    echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1916                fi
1917            else
1918                echo -en "$BOOT_MEDIA_MESSAGE"
1919            fi
1920        else
1921            echo -en "\
1922To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1923CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1924        fi
1925    fi
1926
1927    # Also create the other help screens
1928    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1929    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1930    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1931}
1932
1933
1934MakeBootConfFile() {
1935    local options i ooo
1936    options=""
1937    # Type of boot file (elilo or syslinux/isolinux)
1938    type=$1
1939    if [ "$type" = "elilo" ]; then
1940        sep="="
1941        sepdef="="
1942    else
1943        sep=" "
1944        sepdef=" "
1945        if [ "$type" = "grub" ]; then
1946            sepdef="="
1947        fi
1948    fi
1949
1950    # Generic header for conf file
1951    if [ "$type" = "elilo" ]; then
1952        echo -en "prompt\n"
1953    elif [ "$type" = "grub" ]; then
1954        echo -en "pause Press a key when ready to restore\n"
1955    elif [ "$type" = "grub2" ]; then
1956        echo -en "set "
1957    else
1958        # syslinux family
1959        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1960    fi
1961
1962    # Compute which default option to boot from
1963    echo -en "default${sepdef}"
1964    if [ "$CDRECOVERY" = "yes" ] ; then
1965        if [ "$type" = "grub" ]; then
1966            # TODO: Which num ???
1967            echo -en "0\n"
1968        else
1969            echo -en "RESTORE\n"
1970        fi
1971    # In case it's mondoarchive
1972    elif [ _"$MONDO_SHARE" != _"" ]; then
1973        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1974            if [ "$type" = "grub" ]; then
1975                echo -en "3\n"
1976            else
1977                echo -en "iso\n"
1978            fi
1979        else
1980            if [ "$type" = "grub" ]; then
1981                echo -en "1\n"
1982            else
1983                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1984            fi
1985        fi
1986    else
1987        if [ "$type" = "grub" ]; then
1988            echo -en "0\n"
1989        else
1990            echo -en "expert\n"
1991        fi
1992    fi
1993
1994    # Handle timeout
1995    if [ "$type" = "grub" ]; then
1996        sep='='
1997    fi
1998    if [ "$CDRECOVERY" != "yes" ] ; then
1999        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
2000    else
2001        echo -en "timeout${sep}10000\n"
2002    fi
2003    echo -en "\n"
2004
2005    # prepare which labels will be generated
2006    if [ "$CDRECOVERY" = "yes" ] ; then
2007        options="RESTORE expert"
2008    else
2009        if [ _"$MONDO_SHARE" != _"" ]; then
2010            options="interactive expert compare iso nuke isonuke"
2011        else
2012            options="expert"
2013        fi
2014    fi
2015
2016    # Generate rest of conf file
2017    for i in $options ; do
2018        ooo=$i
2019        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2020        if [ "$type" = "elilo" ]; then
2021            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2022        elif [ "$type" = "grub" ]; then
2023            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2024        elif [ "$type" = "grub2" ]; then
2025            if [ "$BOOT_TYPE" = "UEFI" ]; then
2026                lorder="linuxefi"
2027                iorder="initrdefi"
2028            else
2029                lorder="linux"
2030                iorder="initrd"
2031            fi
2032            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2033        else
2034            ps="/"
2035            if [ $KERNEL_IS_XEN = "no" ]; then
2036                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2037            else
2038                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2039            fi
2040        fi
2041        echo -en "$outstr"
2042    done
2043    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2044        if [ "$type" = "elilo" ]; then
2045            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2046            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2047        elif [ "$type" = "grub" ]; then
2048            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2049        elif [ "$type" = "grub2" ]; then
2050            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2051        else
2052            ps="/"
2053            if [ "$type" = "syslinux" ]; then
2054                ps=""
2055            fi
2056            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2057            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2058        fi
2059    fi
2060}
2061
2062ParseModprobeForIncludes() {
2063local MODPROBE_CONF mpincfile includes include
2064
2065MODPROBE_CONF=/etc/modprobe.conf
2066mpincfile=$1
2067touch $mpincfile
2068if [ -a $MODPROBE_CONF ]; then
2069    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2070    if [ -n "$includes" ]; then
2071        for include in $includes
2072        do
2073            if [ -a "$include" ]; then
2074                echo $include >> $mpincfile
2075            fi
2076        done
2077    fi
2078fi
2079}
2080
2081PrepareBootDir() {
2082
2083        local detect
2084# Needs a bigdir variable setup before calling it
2085
2086    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2087    # to get it on the media (in addition to the boot part
2088    # and also to support UEFI boot mechanism
2089    if [ "$boottype" != "" ]; then
2090        detect="no"
2091    else
2092        detect="yes"
2093        boottype=syslinux
2094    fi
2095    bootdir=$bigdir/$boottype
2096    bootconf="$bootdir/$boottype.cfg"
2097    mkdir -p $bootdir
2098    FindLdlinux32Binary
2099
2100    if [ "$BOOT_TYPE" != "BIOS" ]; then
2101        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2102            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2103            MindiExit -1
2104        fi
2105
2106        mountefi=0
2107        # EFI or UEFI
2108        # TODO: names are hard-coded for now
2109        if [ "$BOOT_TYPE" = "UEFI" ]; then
2110            # UEFI
2111            efidir=$bigdir/EFI/BOOT
2112            # Auto-detection if needed
2113            if [ $detect = "yes" ]; then
2114
2115                # mount /boot/efi if needed
2116                df -T | grep /boot/efi | grep -qE 'vfat'
2117                if [ $? -ne 0 ]; then
2118                    mount /boot/efi
2119                    if [ $? -ne 0 ]; then
2120                        echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2121                        MindiExit -1
2122                    fi
2123                    mountefi=1
2124                fi
2125
2126                # On RHEL6 grub works
2127                dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2128                dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2129                if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2130                    boottype=grub
2131                elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2132                    boottype=grub2
2133                elif [ $dname = "debian" ] && [ $dver = "8" ]; then
2134                    boottype=grub2
2135                else
2136                    # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2137                    boottype=syslinux
2138                fi
2139            fi
2140            if [ "$boottype" = "syslinux" ]; then
2141                if [ ! "$bootbin" ]; then
2142                    FindSyslinux64EFI
2143                    bootbin=$SYSLINUX64EFI
2144                fi
2145                bootconf="$efidir/syslinux.cfg"
2146            elif [ "$boottype" = "grub" ]; then
2147                if [ ! "$bootbin" ]; then
2148                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2149                fi
2150                bootconf="$efidir/BOOTX64.conf"
2151            elif [ "$boottype" = "grub2" ]; then
2152                if [ ! "$bootbin" ]; then
2153                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2154                fi
2155                bootconf="$efidir/grub.cfg"
2156            fi
2157
2158            # Depending on the arch, the target boot file is different
2159            if [ "$ARCH" = "x86_64" ] ; then
2160                tgbin="BOOTX64.efi"
2161            elif [ "$ARCH" = "armv8" ]; then
2162                tgbin="BOOTAA64.efi"
2163            else
2164                # i?386
2165                tgbin="BOOTIA32"
2166            fi
2167        else
2168            # EFI
2169            efidir=$bootdir
2170            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2171            tgbin=$bootbin
2172            boottype=elilo
2173            bootconf="$efidir/elilo.conf"
2174        fi
2175        LogAll "INFO: Found $boottype boot type"
2176        mkdir -p $efidir
2177        cp $bootbin $efidir/$tgbin
2178
2179        if [ $mountefi -eq 1 ]; then
2180            umount /boot/efi 2>&1 > /dev/null
2181        fi
2182
2183        if [ $boottype = "syslinux" ]; then
2184            FindLdlinuxe64Binary
2185            if [ -e "$LDLINUXE64" ]; then
2186                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2187                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2188                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
2189                if [ -e $LDLINUXE64/../isolinux.c32 ]; then
2190                    cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
2191                fi
2192            fi
2193        fi
2194        # tgdir for syslinux
2195        tgdir=$bigdir/EFI
2196    else
2197        # tgdir for syslinux
2198        tgdir=$bootdir
2199    fi
2200    # In all cases prepare syslinux content for BIOS mode
2201    # so that we can have multi boot mode media BIOS+UEFI
2202    # Useful for syslinux 5.x
2203    if [ -e "$LDLINUXC32" ]; then
2204        LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
2205        cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
2206    fi
2207    if [ -e $LDLINUXC32/../isolinux.c32 ]; then
2208        LogFile "INFO: Copying isolinux.c32 to $tgdir"
2209        cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
2210    fi
2211
2212    # Here we need to know the ramdisk_size
2213    size_of_all_tools=`du -sk $bigdir | cut -f1`
2214    export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2215    LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2216
2217    MakeBootConfFile $boottype > $bootconf
2218    LogFile "Boot Conf file $bootconf content is:"
2219    LogFile "------------------------------------"
2220    cat $bootconf >> $LOGFILE
2221    LogFile "------------------------------------"
2222    if [ "$BOOT_TYPE" = "UEFI" ]; then
2223        # Also generate the syslinux conf
2224        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2225        LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2226        LogFile "---------------------------------------------------"
2227        cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2228        LogFile "---------------------------------------------------"
2229    fi
2230
2231}
2232
2233PrepareAllTar() {
2234    echo -en "INFO: Tarring and zipping the data content..."
2235    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2236    LogFile "Size of the data content"
2237    LogFile "------------------------"
2238    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2239    LogFile "------------------------"
2240    echo -e "$DONE"
2241
2242    [ "$bigdir" != "/" ] && rm -rf $bigdir
2243}
2244
2245PrepareDataDiskImages() {
2246    local needlist bigdir diskdir res i j k lines lfiles includefile
2247
2248    rm -f $MINDI_CACHE/mindi.iso
2249    needlist=$MINDI_TMP/what-we-need.txt
2250    bigdir=$MINDI_TMP/bigdir
2251    mkdir -p $bigdir/usr/bin
2252    mkdir -p $bigdir/usr/sbin
2253    includefile=$MINDI_TMP/$$.includefile.txt
2254
2255    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2256    if [ -e "$DEPLIST_FILE" ]; then
2257        lfiles="$DEPLIST_FILE $lfiles"
2258    fi
2259    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2260    ParseModprobeForIncludes $includefile
2261    lines=$(($lines+`cat $includefile | wc -l`))
2262    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2263    res=$?
2264    rm -f $includefile
2265    ListKernelModulePaths >> $needlist
2266    if [ "$res" -ne "0" ] ; then
2267        Die "You have $res files present in dependency list\nbut absent from filesystem."
2268    fi
2269    mkdir -p $bigdir/tmp
2270    if [ _"$MONDO_SHARE" != _"" ]; then
2271        # TODO: no reason to have the cfg file stored twice
2272        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2273        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2274    fi
2275
2276    # Needs to be done after the MRCFG creation
2277    FindAndAddUserKeyboardMappingFile
2278
2279    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2280    DropOptimizedLibraries $needlist $bigdir
2281    echo -en "INFO: Assembling dependency files"
2282
2283    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2284    rm -f $needlist
2285    echo -e "$DONE"
2286
2287    # also copy io.sys and msdos.sys, if we can find them
2288    for i in `mount | cut -d' ' -f3` ; do
2289        for j in io.sys msdos.sys ; do
2290            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2291        done
2292    done
2293
2294    # master boot record, too
2295    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2296    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2297        LogAll "INFO: Backing up $i's MBR"
2298        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2299        sleep 1
2300        sync
2301        j=$i
2302        [ -h "$j" ] && j=`readlink -f $j`
2303        LogAll "INFO: Creating /dev/boot_device ($j)"
2304        mkdir -p $bigdir/dev
2305        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2306    fi
2307
2308    # Get terminfo content
2309    ti="usr/share/terminfo/l"
2310    if [ -d /$ti ]; then
2311        mkdir -p $bigdir/$ti
2312        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2313    fi
2314    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2315        cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2316        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2317        cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2318    fi
2319    if [ -d "/lib/dev-state" ]; then 
2320        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2321    fi
2322    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2323    MakeMountlist $MINDI_TMP/mountlist.txt
2324    CheckMountlist $MINDI_TMP/mountlist.txt
2325    mkdir -p $bigdir/tmp
2326    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2327    if [ _"$MONDO_SHARE" != _"" ]; then
2328        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2329    fi
2330    if [ $LVM != "false" ]; then
2331        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2332        if [ $? -ne 0 ]; then
2333            LVM="false"
2334            rm -f $bigdir/tmp/i-want-my-lvm
2335        else
2336            LogFile "Your i-want-my-lvm file content is:"
2337            LogFile "-----------------------------------"
2338            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2339            LogFile "-----------------------------------"
2340        fi
2341    fi
2342    LogFile "INFO: Your mountlist.txt file content is:"
2343    LogFile "-----------------------------------"
2344    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2345    LogFile "-----------------------------------"
2346
2347    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2348    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2349    if [ _"$MONDO_SHARE" != _"" ]; then
2350        for q in filelist.full.gz biggielist.txt ; do
2351            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2352            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2353        done
2354    fi
2355
2356    PrepareBootDir
2357    PrepareAllTar
2358}
2359
2360
2361Prompt() {
2362    echo -en "$1"
2363    read line
2364}
2365
2366
2367ReadLine() {
2368    local i incoming
2369    read incoming
2370    i=0
2371    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2372        i=$(($i+1))
2373        read incoming
2374    done
2375    echo "$incoming"
2376}
2377
2378
2379SizeOfPartition() {
2380    local devpath drive res stub
2381    device=$1
2382    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2383        Die "Cannot find $device's size - is your /etc/fstab sane?"
2384    fi
2385    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2386        res=`SizeOfRaidPartition $device`
2387        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2388        echo "$res"
2389        return 0
2390    fi
2391    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2392    res=`$FDISK -s $device 2>> $LOGFILE`
2393    # end patch
2394    # take only the first in case of multiple mount (cifs, nfs, ...)
2395    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2396    [ "$res" = "" ] && res="-1"
2397    echo $res
2398    return 0
2399}
2400
2401
2402SizeOfRaidPartition() {
2403    local real_dev smallest_size silly tmp
2404
2405    silly=999999999
2406    smallest_size=$silly
2407
2408    for real_dev in `GetRaidDevMembers $1` ; do
2409        tmp=`SizeOfPartition $real_dev`
2410        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2411    done
2412
2413    if [ "$smallest_size" = "$silly" ] ; then
2414        echo "-1"
2415        return 1
2416    else
2417        echo "$smallest_size"
2418        return 0
2419    fi
2420}
2421
2422
2423StripExecutable()
2424{
2425    local tmpfile
2426
2427    tmpfile=$MINDI_TMP/stripped.$$.dat
2428    [ -d "$1" ] || [ -h "$1" ] && return
2429    cp -f $1 $tmpfile 2>> $LOGFILE
2430    strip $tmpfile 2> /dev/null
2431    if [ $? -eq 0 ] ; then
2432        cp -f $tmpfile $1 2>> $LOGFILE
2433        LogFile "INFO: Stripped binary $2"
2434    fi
2435    rm -f $tmpfile
2436}
2437
2438KernelVer() {
2439        local fkern_ver fname
2440
2441        fname=$1
2442        file $fname | grep -q gzip
2443        if [ $? -eq 0 ] ; then
2444            # Used by ia64
2445            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2446        else
2447            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2448        fi
2449        echo "$fkern_ver"
2450}
2451
2452
2453# WARNING: This function should just echo the final result !!!
2454#
2455TryToFindKernelPath() {
2456    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2457
2458    we_want_version=$KERVERRUN
2459    possible_kernels=""
2460    duff_kernels=""
2461    output=""
2462
2463    if [ "$ARCH" = "ia64" ] ; then
2464       root="/boot/efi/efi"
2465    else
2466       root="/"
2467    fi
2468    # See if we're booted from a Xen kernel
2469    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2470    if [ -f /proc/xen/capabilities ]; then
2471        # It's a Xen kernel
2472        KERNEL_IS_XEN="yes"
2473        LogFile "INFO: It's a Xen kernel..."
2474    fi
2475
2476    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2477        [ ! -e "$fname" ] && continue
2478        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2479        fkern_ver=`KernelVer $fname`
2480        [ "$fkern_ver" = "" ] && continue
2481        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2482        [ -f "$fname" ] || continue
2483        [ -h "$fname" ] && continue
2484        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2485        file $fname | grep -q gzip
2486        if [ $? -eq 0 ] ; then
2487            # Used by ia64
2488            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2489                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2490                duff_kernels="$fname $duff_kernels"
2491            else
2492                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2493                possible_kernels="$fname $possible_kernels"
2494            fi
2495        else
2496            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2497                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2498                duff_kernels="$fname $duff_kernels"
2499            else
2500                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2501                possible_kernels="$fname $possible_kernels"
2502            fi
2503        fi
2504    done
2505    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2506        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
2507    fi
2508    if [ ! "$possible_kernels" ] ; then
2509        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2510        possible_kernels="$duff_kernels"
2511        if [ ! "$possible_kernels" ] ; then
2512            LogAll "INFO: Sorry, no duff kernels either"
2513        else
2514            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2515            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2516        fi
2517    fi
2518    if [ $KERNEL_IS_XEN = "yes" ]; then
2519        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2520        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2521    fi
2522    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2523    noof_kernels=`CountItemsIn "$possible_kernels"`
2524    if [ "$noof_kernels" -eq "0" ] ; then
2525        LogAll "Could not find your kernel."
2526        if [ -e "/boot/vmlinuz" ] ; then
2527            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2528            output=/boot/vmlinuz
2529        else
2530            output=""
2531        fi
2532    elif [ "$noof_kernels" -eq "1" ] ; then
2533        kp=`echo "$possible_kernels" | sed s/' '//`
2534        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2535        output="$kp"
2536    else
2537        for i in $possible_kernels ; do
2538            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2539                LogAll "INFO: OK, I used my initiative and found that "
2540                LogAll "INFO: $i is probably your kernel. "
2541                output="$i"
2542                break
2543            fi
2544        done
2545        if [ ! -n "$output" ]; then
2546            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2547                output=/boot/vmlinuz
2548                LogFile "INFO: Schlomo, this one's for you."
2549            else
2550                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2551                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2552                LogFile "INFO: $possible_kernels"
2553                output=""
2554            fi
2555        fi
2556    fi
2557    if [ $KERNEL_IS_XEN = "yes" ]; then
2558        if [ "$noof_xenkernels" -eq "0" ]; then
2559            xenkernelpath=""
2560        elif [ "$noof_xenkernels" -eq "1" ]; then
2561            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2562            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2563        else
2564            for i in $possible_xenkernels ; do
2565                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2566                    LogFile "INFO: OK, I used my initiative and found that "
2567                    LogFile "INFO: $i is probably your Xen kernel. "
2568                    xenkernelpath="$i"
2569                    break
2570                fi
2571            done
2572            if [ ! -n "$xenkernelpath" ]; then
2573                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2574                if [ ! -n "$new_possible_xenkernels" ]; then
2575                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2576                    LogFile "INFO: Using $xenkernelpath"
2577                else
2578                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2579                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2580                    LogFile "INFO: $possible_xenkernels"
2581                    output=""
2582                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2583                    LogFile "INFO: Using $xenkernelpath"
2584                fi
2585            fi
2586        fi
2587        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2588            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2589        fi
2590    fi
2591    #LogAll "TryToFindKernelPath found $output"
2592    echo "$output"
2593}
2594
2595
2596MakeBootInitFile() {
2597    local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2598
2599    tgz_dir_fname=$1
2600    rdz_fname=$2
2601    kernelsize=$3
2602    tempfile=$MINDI_TMP/temp.rd
2603    res=0 
2604    templog=$MINDI_TMP/$$.log
2605    > $templog
2606
2607    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2608    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2609    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2610    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2611    mkdir -p $mountpoint
2612    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2613
2614    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2615    for d in bin sbin lib lib64; do
2616        if [ -h "/$d" ]; then
2617            thelink=`readlink /$d`
2618            mkdir -p $mountpoint/$thelink || LogAll "ERROR: Unable to create $thelink in $mountpoint."
2619            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2620            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2621                rmdir $mountpoint/$d
2622            fi
2623            if [ ! -h $mountpoint/$d ]; then
2624                rm -f $mountpoint/$d 2> /dev/null
2625                (cd $mountpoint ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2626            fi
2627        fi
2628    done
2629
2630    LogFile "INFO: what is now in $mountpoint"
2631    ls -al $mountpoint >> $LOGFILE
2632   
2633    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2634    # copy from rootfs into mountpoint
2635    LogAll "INFO: Copying Mindi files onto $mountpoint"
2636    for f in $tgz_dir_fname/*; do 
2637        if [ ! -r $f ]; then
2638            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2639        else
2640            cp -af $f $mountpoint 2>&1 >> $LOGFILE
2641        fi
2642    done
2643    (cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2644    (cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2645
2646    (cd $mountpoint/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2647
2648    for w in insmod.static insmod.static.old ; do
2649        s=`which $w 2> /dev/null`
2650        if [ -e "$s" ] ; then
2651            tar cf - -C / $s 2> /dev/null | (cd $mountpoint ; tar xf -)
2652        fi
2653    done
2654
2655    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2656   
2657    # Copy of files mandatory for ssh to automate mount if sshfs is used
2658    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2659    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2660    cat > $mountpoint/tmp/myssh << EOF
2661ssh -o StrictHostKeyChecking=no $*
2662EOF
2663    chmod 755 $mountpoint/tmp/myssh
2664
2665    # Copy of files mandatory for ld.so
2666    cp -a /etc/ld.so.c* $mountpoint/etc
2667
2668    # Handle the case where busybox and mount are dynamically linked
2669    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2670    if [ $? -eq 0 ]; then
2671        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2672        rm -f $mountpoint/bin/mount
2673    fi
2674
2675    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2676    echo -en "INFO: Gathering dependencies of required files..."
2677    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2678    lines=`cat $DEPLIST_DIR/minimal.conf | grep -vE " *#.*|^#" | sort -u`
2679    noof_lines=`echo $lines | wc -w`
2680    progress=0
2681    for f in $lines; do
2682        if [ -d $f ]; then
2683            for g in `find $f`; do 
2684                echo $g >> $MINDI_TMP/minimal.lis
2685                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2686            done
2687        else 
2688            if [ -r $f ]; then
2689                echo $f >> $MINDI_TMP/minimal.lis
2690                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2691            fi
2692        fi
2693        progress=$(($progress+1))
2694        LogProgress $progress $noof_lines
2695    done
2696    echo -e "$DONE"
2697    echo -en "INFO: Processing all dependencies links..."
2698    lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
2699    noof_lines=`echo $lines | tr ' ' '\n' | wc -l`
2700    progress=0
2701    for f in $lines; do
2702        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2703        progress=$(($progress+1))
2704        LogProgress $progress $noof_lines
2705    done
2706    echo -e "$DONE"
2707    # Initial / are trucated by tar
2708    finallist=""
2709    # Remove directories from the list, as tar/cp will create them anyway
2710    # and it may hurt if /lib is in it as on Debian/Ubuntu
2711    # recent bash says that -d is true for a link to a dir !
2712    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2713        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2714            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2715            if [ ! -e "$mountpoint/$f" ]; then
2716                finallist="$finallist $f"
2717            fi
2718        fi
2719    done
2720    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2721
2722    fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2723    LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
2724    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogAll "WARNING: Problem in minimal analysis" $templog
2725
2726    # In case target /bin dir still doesn't exist, create it before using it
2727    if [ ! -d $mountpoint/bin ]; then
2728        mkdir -p $mountpoint/bin
2729    fi
2730
2731    # For older distributions expecting /sbin/init provides it
2732    if [ ! -e "$mountpoint/sbin/init" ]; then
2733        (cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2734    fi
2735
2736    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2737    (cd $mountpoint ; ln -sf /bin/bash bin/sh)
2738    LogFile "INFO: Using bash as default shell"
2739
2740    # Avoids an issue on some distro (RHEL5)
2741    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2742
2743    # Management of udev (which includes modprobe in rules)
2744    ps auxww | grep -v grep | grep -qw udevd
2745    if [ $? -eq 0 ]; then
2746        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2747        LogFile "INFO: udev device manager found"
2748        tar cf - -C / /etc/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /etc/udev analysis" $templog
2749        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2750        rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2751        # Do not do it if it's a link (Ubuntu 64 bits #503)
2752        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2753            tar cf - -C / /lib64/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2754        fi
2755        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2756            tar cf - -C / /lib32/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2757        fi
2758        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2759            tar cf - -C / /lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib/udev analysis" $templog
2760        fi
2761        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2762            tar cf - -C / /usr/lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2763        fi
2764        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2765            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2766            lis=""
2767            # Get only the files which exist in that list
2768            # and potentially their symlink structure
2769            for i in $lis2; do
2770                if [ -h $i ]; then
2771                    j=$i
2772                    while [ -h $j ]; do
2773                        lis="$lis $j"
2774                        j=`readlink -f $j`
2775                    done
2776                    lis="$lis $j"
2777                elif [ -d $i ]; then
2778                    lis3="$lis3 $i"
2779                elif [ -f $i ]; then
2780                    lis="$lis $i"
2781                fi
2782            done
2783            # And their deps
2784            LocateDeps $lis > $MINDI_TMP/udev.lis
2785            for i in $lis; do
2786                if [ "`echo $i | cut -c1`" = "/" ]; then
2787                    j=`echo $i | cut -c2-`
2788                    [ "$j" != "" ] && rm -f $mountpoint/$j
2789                fi
2790                echo "$i" >> $MINDI_TMP/udev.lis
2791            done
2792            finallist=""
2793            # Remove directories from the list, as tar/cp will create them anyway
2794            # and it may hurt if /lib is in it as on Debian/Ubuntu
2795            # recent bash says that -d is true for a link to a dir !
2796            for f in `sort -u $MINDI_TMP/udev.lis`; do
2797                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2798                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2799                    if [ ! -e "$mountpoint/$f" ]; then
2800                        finallist="$finallist $f"
2801                    fi
2802                fi
2803            done
2804            # But adds the directory useful for udev in $lis3
2805            fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2806            LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
2807            cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog  || LogAll "WARNING: Problem in udev.lis analysis" $templog
2808            rm -f $MINDI_TMP/udev.lis
2809        else
2810            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2811            LogAll "         mindi will use static devices which may cause problems"
2812            rm -f $mountpoint/tmp/USE-UDEV
2813        fi
2814    fi
2815
2816    # Management of potential HW info (ProLiant only at the moment)
2817    rm -rf $MINDI_CACHE/bkphw
2818    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2819    if [ -d $MINDI_CACHE/bkphw ]; then
2820        LogAll "INFO: Hardware Information found and saved ..."
2821        cp -rp $MINDI_CACHE/bkphw $mountpoint
2822        if [ -f $MINDI_CACHE/tools.files ]; then
2823            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2824            LocateDeps $lis > $MINDI_TMP/tools.lis
2825            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
2826        fi
2827        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2828            mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2829            chmod 755 $mountpoint/mindi-rsthw
2830        fi
2831        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2832    fi
2833
2834    # Management of perl scripts delivered needed at restore time
2835    LogAll "INFO: Analyzing perl modules dependencies..."
2836    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2837    LogFile "DBG4: Perl Modules found:"
2838    LogFile "-------------------------"
2839    cat $MINDI_TMP/perl.lis >> $LOGFILE
2840    LogFile "-------------------------"
2841    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
2842
2843    for w in cdrom groovy-stuff ; do
2844        mkdir -p mnt/$w
2845    done
2846
2847    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
2848
2849    needed_modules=""
2850    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2851
2852    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2853        # For PXE boot
2854        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2855    fi
2856    for i in $DENY_MODS; do
2857        LogFile "INFO: Removing $i from the list of modules to load"
2858        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2859    done
2860
2861    if [ "${kernelname}" != "" ]; then
2862        needed_modules_path=lib/modules/${kernelname}
2863        mkgmopt="-k ${kernelname}"
2864    else
2865        needed_modules_path=lib/modules/$KERVERRUN
2866        mkgmopt="-k $KERVERRUN"
2867    fi
2868
2869    [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2870    LogAll "INFO: Analyzing kernel modules dependencies..."
2871    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2872
2873    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2874    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
2875
2876    # Uncompress modules if not using udev and native modprobe
2877    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2878        for i in $needed_modules; do
2879            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2880                gunzip -f $mountpoint/$i
2881            fi
2882            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2883                bunzip2 -f $mountpoint/$i
2884            fi
2885            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2886                unxz -f $mountpoint/$i
2887            fi
2888            LogFile "INFO: Uncompressing $i"
2889        done
2890    fi
2891
2892    # Also copy modules.* in case of udev so that normal modprobe works
2893    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
2894
2895    # Copy FW in case some drivers needs it
2896    for d in "/lib" "/usr/lib"; do
2897        if [ -d "$d/firmware" -a ! -h $d ]; then
2898            cp -a "$d/firmware" "$mountpoint/$d"
2899        fi
2900    done
2901
2902    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2903    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2904        if [ -d "$d/multipath" -a ! -h $d ]; then
2905            cp -a "$d/multipath" "$mountpoint/$d"
2906        fi
2907    done
2908
2909    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2910    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2911
2912    # Copy an additional ProLiant tool for OBDR support
2913    if [ -f $MINDI_TMP/OBDR ]; then
2914        found=0
2915        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2916            mkdir -p $mountpoint/usr/bin
2917            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2918            LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2919            found=1
2920        fi
2921        if [ -x /usr/bin/sg_wr_mode ]; then
2922            mkdir -p $mountpoint/usr/bin
2923            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2924            LocateDeps $lis > $MINDI_TMP/obdr.lis
2925            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
2926            LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2927            found=1
2928        fi
2929        if [ $found -eq 0 ]; then
2930            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2931            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2932        fi
2933    fi
2934
2935    if [ ! -e "/sbin/devfsd" ]; then
2936        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2937        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2938        rm -f $mountpoint/sbin/devfsd
2939    fi
2940    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2941    if [ _"$MONDO_SHARE" != _"" ]; then
2942        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2943        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2944        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2945        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2946        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2947    fi
2948
2949    # Create module list to load at restore time
2950    rm -f $mountpoint/tmp/modules
2951    for m in $CDROM_MODS; do
2952        echo $m >> $mountpoint/tmp/modules
2953    done
2954
2955    mkdir -p $mountpoint/proc
2956    LogFile "---------------------------"
2957    LogFile "Size of initial ramdisk:"
2958    LogFile "---------------------------"
2959    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2960    LogFile "---------------------------"
2961    LogFile "Content of initial ramdisk:"
2962    LogFile "---------------------------"
2963    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2964    LogFile "---------------------------"
2965
2966    # Determine what filesystem to use for initrd image
2967    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2968    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2969    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2970    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2971        # say what will be used
2972        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2973        # kernel expects linuxrc in ext2 filesystem
2974        (cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2975        # unmount loop filesystem and create image file using the standard approach
2976        sync
2977        umount $mountpoint || Die "Cannot unmount $tempfile"
2978        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2979        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2980            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2981        else
2982            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2983        fi
2984        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2985        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2986        rm -f ${rdz_fname}.tmp
2987        # log that we are done
2988    elif [ "$gvFileSystem" = "initramfs" ]; then
2989        # say what will be used
2990        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2991        # make sure that cpio is there
2992        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2993        # kernel expects init in cpio filesystem
2994        (cd "$mountpoint" ; ln -sf usr/sbin/init init)
2995        # create cpio image file and unmount loop filesystem
2996        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
2997        sync
2998        umount $mountpoint || Die "Cannot unmount $tempfile"
2999        # log that we are done
3000    else
3001        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
3002    fi
3003
3004    if [ "$res" -eq "0" ] ; then
3005        LogAll "INFO: MakeBootInitFile finished without error."
3006    else
3007        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
3008    fi
3009    return 0
3010}
3011
3012
3013##############################################################################
3014#----------------------------------- Main -----------------------------------#
3015##############################################################################
3016
3017# Now we can create what we need
3018mkdir -p $MINDI_TMP
3019
3020# --nolog needs to be first, and is used in analyze-my-lvm
3021if [ "$1" = "--nolog" ] ; then
3022    shift
3023    LOGFILE=/dev/stderr
3024else
3025    > $LOGFILE
3026fi
3027if [ "$1" = "--printvar" ] ; then
3028    shift
3029    if [ _"$1" != _"" ] ; then
3030        set | grep -Ew "^$1" | cut -d= -f2
3031    fi
3032    exit 0
3033fi
3034
3035LogFile "mindi v$MINDI_VERSION"
3036LogFile "-----------------------------"
3037LogFile "Start date : `date`"
3038LogFile "-----------------------------"
3039LogFile "$ARCH architecture detected"
3040LogFile "mindi called with the following arguments:"
3041echo "$@">> $LOGFILE
3042LogFile "-----------------------------"
3043LogFile "pbdistrocheck results:"
3044pbdistrocheck >> $LOGFILE
3045LogFile "-----------------------------"
3046
3047# Log some capital variables
3048[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3049[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3050LogFile "MONDO_SHARE = $MONDO_SHARE"
3051LogFile "MINDI_LIB = $MINDI_LIB"
3052LogFile "MINDI_SBIN = $MINDI_SBIN"
3053LogFile "MINDI_CONF = $MINDI_CONF"
3054# Purge from potential old run
3055if [ _"$MINDI_CACHE" = _"" ]; then
3056    Die "MINDI_CACHE undefined"
3057else
3058    LogFile "MINDI_CACHE = $MINDI_CACHE"
3059fi
3060
3061if [ -f $MINDI_CONFIG ]; then
3062    LogFile "-----------------------------"
3063    LogFile " Mindi configuration file    "
3064    LogFile "-----------------------------"
3065    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3066    LogFile "-----------------------------"
3067fi
3068LogFile "In Mindi"
3069LogFile "--------"
3070LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3071LogFile "--------"
3072
3073trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3074
3075# Sanity checks
3076which which > /dev/null 2> /dev/null || Die "Please install 'which'."
3077which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
3078which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3079which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
3080if which awk &> /dev/null ; then
3081    if ! which gawk &> /dev/null ; then
3082        LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3083    fi
3084fi
3085which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3086[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3087
3088[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3089
3090# Update the PATH variable if incomplete
3091if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3092    PATH=$PATH:/sbin:/usr/sbin
3093    export PATH
3094    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3095    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3096    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3097fi
3098
3099if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3100    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3101fi
3102
3103### TODO
3104### Fix as it's not mandatory on ia64
3105if [ "$ARCH" = "ia64" ] ; then
3106    if which elilo &> /dev/null ; then
3107        LILO_EXE=elilo
3108    else
3109        LILO_EXE=`which false 2> /dev/null`
3110    fi
3111else
3112    FindIsolinuxBinary
3113fi
3114trap "Aborted" SIGTERM
3115DONE="\r\t\t\t\t\t\t\t\tDone.         "
3116kernelpath=""
3117MONDO_ROOT=/var/cache/mondo
3118mkdir -p $MONDO_ROOT
3119
3120if [ -d "/proc/lvm" ]; then
3121    # LVM v1
3122    LVMCMD=""
3123    LVM="v1"
3124elif [ -d "/dev/mapper" ]; then
3125    # LVM v2
3126    LVMCMD="lvm"
3127    LVM="v2"
3128else
3129    LVM="false"
3130fi
3131
3132if [ -e "/proc/cmdline" ]; then
3133    CMDLINE="/proc/cmdline"
3134elif [ -e "/tmp/cmdline" ]; then
3135    CMDLINE="/tmp/cmdline"
3136else
3137    CMDLINE="/dev/null"
3138fi
3139
3140LogFile "INFO: LVM set to $LVM"
3141LogFile "----------"
3142LogFile "mount result:"
3143LogFile "-------------"
3144mount >> $LOGFILE
3145if [ -e "/etc/raidtab" ]; then
3146    LogFile "-------------"
3147    LogFile "/etc/raidtab content:"
3148    LogFile "-------------"
3149    cat /etc/raidtab >> $LOGFILE
3150else
3151    LogFile "No file /etc/raidtab"
3152fi
3153if [ -e "/etc/mdadm.conf" ]; then
3154    LogFile "-------------"
3155    LogFile "/etc/mdadm.conf content:"
3156    LogFile "-------------"
3157    cat /etc/mdadm.conf >> $LOGFILE
3158else
3159    LogFile "-------------"
3160    LogFile "No file /etc/mdadm.conf"
3161fi
3162LogFile "-------------"
3163LogFile "cat $CMDLINE"
3164LogFile "-------------"
3165cat $CMDLINE >> $LOGFILE
3166LogFile "-------------"
3167LogFile "cat /proc/swaps:"
3168LogFile "-------------"
3169cat /proc/swaps >> $LOGFILE
3170LogFile "-------------"
3171if [ -e "/proc/mdstat" ]; then
3172    LogFile "cat /proc/mdstat:"
3173    LogFile "-------------"
3174    cat /proc/mdstat >> $LOGFILE
3175else
3176    LogFile "No pseudo file /proc/mdstat"
3177fi
3178LogFile "-------------"
3179LogFile "cat /proc/partitions:"
3180LogFile "-------------"
3181cat /proc/partitions >> $LOGFILE
3182LogFile "-------------"
3183LogFile "cat /proc/filesystems:"
3184LogFile "-------------"
3185cat /proc/filesystems >> $LOGFILE
3186LogFile "-------------"
3187LogFile "lsmod result:"
3188LogFile "-------------"
3189lsmod >> $LOGFILE
3190MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3191if [ -x /usr/sbin/esxcfg-module ]; then
3192    LogFile "-------------"
3193    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3194    LogFile "-------------"
3195    LogFile "VMWare modules"
3196    LogFile "-------------"
3197    /usr/sbin/esxcfg-module -l >> $LOGFILE
3198    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3199fi
3200LogFile "-------------" 
3201LogFile "FORCE_MODS:"
3202LogFile "-------------"
3203LogFile "$FORCE_MODS"
3204LogFile "-------------"
3205LogFile "DENY_MODS:"
3206LogFile "-------------"
3207LogFile "$DENY_MODS"
3208LogFile "-------------"
3209LogFile "df result:"
3210LogFile "----------"
3211df -aT >> $LOGFILE
3212LogFile "-------------"
3213LogFile "df -i result:"
3214LogFile "----------"
3215df -i >> $LOGFILE
3216LogFile "-------------"
3217if [ -r /boot/grub/menu.lst ]; then
3218    LogFile "-------------"
3219    LogFile "INFO: /boot/grub/menu.lst content"
3220    LogFile "-------------"
3221    cat /boot/grub/menu.lst >> $LOGFILE
3222    LogFile "-------------"
3223fi
3224if [ -r /boot/grub/grub.conf ]; then
3225    LogFile "-------------"
3226    LogFile "INFO: /boot/grub/grub.conf content"
3227    LogFile "-------------"
3228    cat /boot/grub/grub.conf >> $LOGFILE
3229    LogFile "-------------"
3230fi
3231if [ -r /boot/grub/grub.cfg ]; then
3232    LogFile "-------------"
3233    LogFile "INFO: /boot/grub/grub.cfg content"
3234    LogFile "-------------"
3235    cat /boot/grub/grub.cfg >> $LOGFILE
3236    LogFile "-------------"
3237fi
3238if [ -r /boot/grub/device.map ]; then
3239    LogFile "-------------"
3240    LogFile "INFO: /boot/grub/device.map content"
3241    LogFile "-------------"
3242    cat /boot/grub/device.map >> $LOGFILE
3243    LogFile "-------------"
3244fi
3245if [ -r /etc/lilo.conf ]; then
3246    LogFile "-------------"
3247    LogFile "INFO: /etc/lilo.conf content"
3248    LogFile "-------------"
3249    cat /etc/lilo.conf >> $LOGFILE
3250fi
3251if [ -d /boot/efi ]; then
3252    gcf=`find /boot/efi -name 'grub.c*'`
3253    if [ _"$gcf" = _"" ]; then
3254        LogFile "Found a /boot/efi directory without a grub config file in it"
3255    else
3256        LogFile "-------------"
3257        LogFile "INFO: $gcf content"
3258        LogFile "-------------"
3259        cat $gcf >> $LOGFILE
3260        LogFile "-------------"
3261    fi
3262fi
3263
3264LogFile "Full fdisk info"
3265LogFile "---------------"
3266$FDISK -l >> $LOGFILE
3267LogFile "----------------"
3268
3269# Compute libata version
3270laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3271# If libata v2 is used then remove ide-generic as it will perturbate boot
3272if [ "`echo $MODULES | grep libata`" ]; then
3273    if [ "$laver" = "2" ]; then
3274        DENY_MODS="$DENY_MODS ide-generic"
3275        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3276        LogFile "-------------"
3277    fi
3278fi
3279
3280# Check for McAfee which disturbs the access to some files (tgz in articular)
3281if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3282    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3283    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3284    LogFile "WARNING: You have two options:"
3285    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3286    LogFile "WARNING:  - Disable the scanner during the backup"
3287fi
3288
3289#
3290# If we have a USB device we need to store info
3291# and remove it from the parameters line
3292#
3293if [ "$#" -ne "0" ] ; then
3294    if [ "$1" = "--usb" ] ; then
3295        shift
3296        USBDEVICE=$1
3297        if [ _"$USBDEVICE" = _"" ]; then
3298            Die "No USB device specified"
3299        fi
3300        shift
3301    fi
3302fi
3303
3304if [ "$#" -ne "0" ] ; then
3305    if [ "$1" = "--findkernel" ] ; then
3306        resk=`TryToFindKernelPath`
3307        # Avoids logfile content for mondo
3308        export MONDO_SHARE=""
3309        if [ "$resk" = "" ] ; then
3310            if [ $KERNEL_IS_XEN = "yes" ]; then
3311                echo "$xenkernelpath"
3312                LogFile "INFO: xenkernelpath = $xenkernelpath"
3313                MindiExit 0
3314            else
3315                MindiExit -1
3316            fi
3317        else
3318            echo "$resk"
3319            LogFile "INFO: kernelpath = $resk"
3320            MindiExit 0
3321        fi
3322    elif [ "$1" = "--locatedeps" ] ; then
3323        [ ! "$2" ] && Die "Please specify the binary to look at"
3324        LocateDeps $*
3325        # Avoids logfile content for mondo
3326        export MONDO_SHARE=""
3327        MindiExit $?
3328    elif [ "$1" = "--readalllink" ] ; then
3329        [ ! "$2" ] && Die "Please specify the binary to look at"
3330        # Avoids logfile content for mondo
3331        export MONDO_SHARE=""
3332        mr-read-all-link $2
3333        MindiExit $?
3334    elif [ "$1" = "--makebcf" ] ; then
3335        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3336        MakeBootConfFile $2
3337        MindiExit 0
3338    elif [ "$1" = "--makemessage" ] ; then
3339        MakeMessageFile | cut -c1-80
3340        MindiExit 0
3341    elif [ "$1" = "--makemountlist" ] ; then
3342        [ ! "$2" ] && Die "Please specify the output file"
3343        MakeMountlist $2
3344        CheckMountlist $2
3345        # Avoids logfile content for mondo
3346        export MONDO_SHARE=""
3347        MindiExit $?
3348    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3349        echo "Mindi v$MINDI_VERSION"
3350        # Avoids logfile content for mondo
3351        export MONDO_SHARE=""
3352        MindiExit 0
3353    elif [ "$1" = "--ironic" ] ; then
3354        [ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
3355        [ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
3356        [ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
3357        #TODO: See how we can influence the boot loader
3358        [ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
3359        if [ "$5" ]; then
3360            boottype=$5
3361        fi
3362        [ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
3363        if [ "$6" ]; then
3364            bootbin=$6
3365        fi
3366        kernelpath=$2
3367        BOOT_TYPE=$4
3368        bigdir=$MINDI_TMP/bigdir
3369        PrepareBootDir
3370        PrepareAllTar
3371        cp $3 $MINDI_TMP/initrd.img
3372        MakeBootableDevice ISO
3373        MindiExit 0
3374    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3375        MONDO_TMP=$2
3376        # Change MINDI_TMP for the one provided by mondo
3377        # So that it can get back the built files
3378        if [ _"$MONDO_TMP" = _"" ]; then
3379            Die "MONDO_TMP is empty, aborting"
3380        fi
3381        if [ _"$MONDO_TMP" = _"/" ]; then
3382            Die "MONDO_TMP is /, aborting"
3383        fi
3384        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3385        rmdir $MINDI_TMP
3386        export MINDI_TMP=$MONDO_TMP
3387        mkdir -p $MINDI_TMP
3388
3389        # This is the scratch dir in mondo - subdir images
3390        MINDI_CACHE=$3
3391        LogFile "MINDI_CACHE = $MINDI_CACHE"
3392
3393        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3394        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3395       
3396###
3397### Sq-Modification...
3398### Attempt to locate kernel specific module path
3399### if module path is found then use it other wise use uname -r to set it...
3400###
3401        if [ $KERNEL_IS_XEN = "yes" ]; then
3402            LogAll "INFO: xenkernelpath = $xenkernelpath"
3403        fi
3404        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3405        if [ ! -d "/lib/modules/$kernelname" ]; then
3406           LogAll "WARNING: Module path for ${kernelpath} not found..."
3407           LogAll "         using running kernel\'s modules."
3408           kernelname=$KERVERRUN
3409        else
3410           LogAll "INFO: Using modules for kernel: ${kernelname}"
3411        fi
3412        LogAll "INFO: kernelname = $kernelname"
3413        LogAll "INFO: kernelpath = $kernelpath"
3414###
3415### end of Sq-Modification
3416###
3417        TAPEDEV=$5
3418        TAPESIZE=$6
3419        FILES_IN_FILELIST=$7
3420        USE_LZO=$8
3421        CDRECOVERY=$9
3422        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3423            IMAGE_DEVS=""
3424        else
3425            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3426        fi
3427        if [ "${11}" ] ; then
3428            LILO_OPTIONS=""
3429    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3430        fi
3431        LAST_FILELIST_NUMBER=${12}
3432        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3433        export MINDI_EXCLUDE_DEVS="${14}"
3434        USE_COMP="${15}"
3435        USE_LILO="${16}"
3436        USE_STAR="${17}"
3437        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3438        DIFFERENTIAL="${19}"
3439        USE_GZIP="${20}"
3440        USE_LZMA="${21}"
3441        NOT_BOOT="${22}"
3442        BOOT_TYPE="${23}"
3443        [ "$USE_COMP" = "" ] && USE_COMP=yes
3444        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3445        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3446        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3447        [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3448        # MONDO_ROOT is the real scratchdir
3449        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3450        if [ _"$MONDO_ROOT" != _"" ]; then
3451            mkdir -p $MONDO_ROOT
3452        else
3453            Die "MONDO_ROOT is undefined"
3454        fi
3455    else
3456        LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
3457        LogScreen "        mindi --ironic kernel initrd [BIOS|UEFI] [syslinux|grub|grub2] [/path/to/bootloader]"
3458        LogScreen "        mindi --locatedeps file"
3459        LogScreen "        mindi --makemessage"
3460        LogScreen "        mindi --findkernel"
3461        LogScreen "        mindi --makemountlist file"
3462        LogScreen "        mindi --makebcf bootloader"
3463        LogScreen "        mindi -V"
3464        MindiExit -1
3465    fi
3466fi
3467
3468if [ _"$MINDI_CACHE" != _"" ]; then
3469    rm -rf $MINDI_CACHE/* 2> /dev/null
3470    mkdir -p $MINDI_CACHE
3471fi
3472
3473[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3474
3475if [ _"$MONDO_SHARE" = _"" ]; then
3476    LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3477    LogAll "Latest Mindi is available from http://www.mondorescue.org"
3478    LogAll "BusyBox sources are available from http://www.busybox.net"
3479    LogAll "------------------------------------------------------------------------------"
3480else
3481    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3482fi
3483if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3484    LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3485else
3486    LogAll "ERROR: Unable to find mindi-busybox, please install it"
3487    MindiExit -1
3488fi
3489
3490for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3491    modinfo $i 2> /dev/null 1> /dev/null
3492    if [ $? -eq 0 ]; then
3493        modprobe $i 2>&1 > /dev/null
3494    fi
3495done
3496
3497LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3498LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3499LogFile "NOT_BOOT = '$NOT_BOOT'"
3500if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3501    LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3502    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3503    MakeMountlist $MINDI_TMP/mountlist.txt
3504    CheckMountlist $MINDI_TMP/mountlist.txt
3505    mkdir -p $MINDI_TMP/small-all/tmp
3506    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3507    (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3508    sleep 2
3509    LogAll "Done. Exiting."
3510    MindiExit 0
3511fi
3512
3513if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3514    LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3515fi
3516
3517if [ "$kernelpath" = "" ] ; then
3518    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3519    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3520    read ch
3521    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3522        USE_OWN_KERNEL="yes"
3523    else
3524        USE_OWN_KERNEL="no"
3525    fi
3526    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3527        kernelpath=`TryToFindKernelPath`
3528        if [ "$kernelpath" = "" ] ; then
3529            echo -n "Please enter kernel path : "
3530            read kernelpath
3531        fi
3532    fi
3533fi
3534
3535echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3536[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3537
3538mountpoint=$MINDI_TMP/mountpoint.$$
3539PrepareDataDiskImages
3540
3541MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not create initrd.img"
3542
3543[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3544...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3545
3546if [ _"$MONDO_SHARE" = _"" ]; then
3547    OfferToMakeBootableISO
3548    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3549        OfferToMakeBootableUSB
3550    fi
3551    LogAll "INFO: Mindi Finished"
3552elif [ "$TAPEDEV" ] ; then
3553    if [ "$ARCH" != "ia64" ] ; then
3554        # We need to keep the img file as boot file for ia64 platform
3555        rm -f $MINDI_CACHE/{*img,*iso}
3556    else
3557        rm -f $MINDI_CACHE/*iso
3558    fi
3559    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3560        OfferToMakeBootableUSB
3561    fi
3562    OfferToMakeBootableISO
3563    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3564        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3565    else
3566        Die "Cannot find all.tar.gz, to be written to tape"
3567    fi
3568elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3569    OfferToMakeBootableUSB
3570else
3571    OfferToMakeBootableISO
3572fi
3573
3574if [ -f $MINDI_TMP/$MRCFG ]; then
3575    LogFile "INFO: Your $MRCFG file is:"
3576    LogFile "--------------------------"
3577    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3578    LogFile "--------------------------"
3579else
3580    if [ _"$MONDO_SHARE" != _"" ] ; then
3581        LogAll "ERROR: You don't have a $MRCFG file !"
3582    fi
3583fi
3584# cleanup
3585MindiExit 0
Note: See TracBrowser for help on using the repository browser.