Context Navigation

source: MondoRescue/branches/3.2/mindi/mindi@ 3587

Visit:

Last change on this file since 3587 was 3587, checked in by Bruno Cornec, 8 years ago
By default CDRECOVERY is undefined so for ironic case reverse a test case to take that in account
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 126.4 KB

Line
1	#!/bin/bash
2
3	# $Id: mindi 3587 2016-06-03 13:06:51Z bruno $
4	#
5	#-----------------------------------------------------------------------------
6	# mindi - mini-Linux distro based on the user's filesystem & distribution
7	#
8	# Mindi can create a multi-image boot/root kit. The first image is the boot
9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10	# the third disk is data disk #2; and so it goes.
11	#
12	# See http://www.mondorescue.org for details.
13	#-----------------------------------------------------------------------------
14
15	### Which arch are we on (useful for ia64 port)
16	ARCH=`/bin/uname -m`
17	KERVERRUN=`/bin/uname -r`
18	# By default we use the running kernel as a reference
19	KERVER=$KERVERRUN
20
21	# In case of problem with udev you can try to add udevdebug
22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23	MINDI_DEFAULT_BOOT_OPTION="interactive"
24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25	# So this parameter only applies to non CD recovery.
26	MINDI_BOOT_TIMEOUT="300"
27
28	MINDI_REV=PBREV
29	MINDI_VER=PBVER
30
31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32	MINDI_PREFIX=XXX
33	MINDI_CONF=YYY
34	MINDI_SBIN=${MINDI_PREFIX}/sbin
35	MINDI_LIB=LLL
36	MINDI_CACHE=/var/cache/mindi
37
38	MRCFG=mondorestore.cfg
39
40	# Temporary directory for mindi
41	TMPDIR=${TMPDIR:=/tmp}
42	if [ ! -d $TMPDIR ]; then
43	mkdir -p $TMPDIR
44	fi
45
46	EXTRA_SPACE=150000 # increase if you run out of ramdisk space
47
48	PROMPT_MAKE_CD_IMAGE="yes"
49	# Ask if you want to make a CD Image to be written?
50	# if this is set to 'no' in the conf file, then the image will be created automatically
51
52	PROMPT_MAKE_USB_IMAGE="yes"
53	# Ask if you want to make a USB Image to be written?
54	# if this is set to 'no' in the conf file, then the image will be created automatically
55
56	USE_OWN_KERNEL="yes"
57	# If set to "no", you will be prompted for whether or not
58	# you want to use your own kernel, or the supplied default.
59	# If "yes" mindi will automatically use your own kernel.
60
61	KERNEL_IS_XEN="no"
62	# If set to "no", the kernel is not a Xen kernel
63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64	xenkernelpath=""
65
66	MY_FSTAB=/etc/fstab
67	TAPE_MODS="ht st osst ide-tape ide_tape"
68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70	# ide-probe-mod
71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456"
72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
76	# Replace with that line for HP OCMP e.g.
77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78	DENY_MODS="kqemu vxfen"
79	# Force some modules to be included
80	FORCE_MODS=""
81
82	LOGFILE=/var/log/mindi.log
83	BOOT_MEDIA_MESSAGE="\
84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88	\n\
89	You may add one or more parameters as well as per the function keys below\n\
90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91	\n\
92	If restoring from a local external disk or USB key, do not connect it \n\
93	until the boot-up has finished.\n\
94	\n\
95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
96	"
97	FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99	# Using a config file allow to overwrite some values
100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101	if [ -f $MINDI_CONFIG ]; then
102	. $MINDI_CONFIG
103	fi
104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107	# Debian 8 system e.g. use xorriso for UEFI support.
108	# However, they use exactly the same command line parameters as mkisofs, so just
109	# use it if it's available.
110	ISO_CMD="/usr/bin/xorriso"
111
112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
113	# However, they use exactly the same command line parameters as mkisofs, so just
114	# use it if it's available.
115	if [ ! -x $ISO_CMD ]; then
116	ISO_CMD="/usr/bin/genisoimage"
117	# For compatibility with previous versions default to mkisofs
118	if [ ! -x $ISO_CMD ]; then
119	ISO_CMD="/usr/bin/mkisofs"
120	fi
121	if [ ! -x $ISO_CMD ]; then
122	LogFile "NOTE: No CD image (ISO file) utility found"
123	ISO_CMD = ""
124	fi
125	else
126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
127	fi
128
129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi-Image -o $MINDI_CACHE/mindi.iso "
130
131	# Mindi set this as default in case it's invoked alone
132	BOOT_TYPE="BIOS"
133	# and we also check whether we're UEFI or not.
134	if [ -d "/sys/firmware/efi" ]; then
135	BOOT_TYPE="UEFI"
136	else
137	# Find MBR in case of bootable USB device to build
138	MBRFILE=/usr/lib/syslinux/mbr.bin
139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143	fi
144
145	# Function to log on screen only
146	LogScreen() {
147	if [ -e /dev/stderr ] ; then
148	echo -e "$1" >> /dev/stderr
149	elif [ -e /usr/bin/logger ] ; then
150	/usr/bin/logger -s $1
151	fi
152	}
153
154	# Function to log in log file only
155	LogFile() {
156
157	echo -e "$1" >> $LOGFILE
158	if [ _"$2" != _"" ]; then
159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160	rm -f "$2"
161	fi
162	}
163
164	# Function to log in both screen and logfile
165	LogAll() {
166	LogScreen "$1"
167	LogFile "$1" "$2"
168	}
169
170	# Last function called before exiting
171	# Parameter is exit code value
172	# Should be declared here as used immediately below potentialy
173	MindiExit() {
174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
175	LogFile "INFO: End date : `date`"
176	if [ _"$MONDO_SHARE" != _"" ] ; then
177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178	if [ -f $LOGFILE ]; then
179	cat $LOGFILE >> /var/log/mondoarchive.log
180	else
181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
182	fi
183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184	fi
185
186	cd /
187	sync&
188
189	# Clean temporary files only when standalone mindi
190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191	rm -Rf $MINDI_TMP
192	fi
193	exit $1
194	}
195
196	Die() {
197	local i
198	if [ "$1" = "" ] ; then
199	LogAll "FATAL ERROR"
200	else
201	LogAll "FATAL ERROR. $1"
202	fi
203	if [ _"$2" != _"" ]; then
204	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
205	fi
206	rm -f "$2"
207
208	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
209	LogAll "See http://www.mondorescue.org for more information."
210	LogAll "WE CANNOT HELP unless you enclose that file.\n"
211	MindiExit -1
212	}
213
214	# Now we can create what we need
215	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
216	if [ $? -ne 0 ]; then
217	df $TMPDIR
218	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
219	fi
220	if [ _"$MINDI_TMP" = _"" ]; then
221	Die "MINDI_TMP is empty, aborting"
222	fi
223	if [ _"$MINDI_TMP" = _"/" ]; then
224	Die "MINDI_TMP is /, aborting"
225	fi
226	export MINDI_TMP
227
228	# ----------------------------------------------------------------------------
229
230
231	AbortHere() {
232	[ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
233	Die "Program is terminating in response to signal received from OS/user"
234	}
235
236
237	Aborted() {
238	trap SIGHUP SIGTERM SIGTRAP SIGINT
239	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
240	Die "User abort."
241	}
242
243
244	AddFileToCfgIfExists() {
245	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
246	}
247
248
249	AddKeyboardMappingFile() {
250	local mappath r included_list included_item i res ii sss
251	mappath=$1
252	KBDEPTH=$(($KBDEPTH+1))
253	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
254	if [ -e "$bigdir/$mappath" ] ; then
255	LogFile "INFO: $mappath already added"
256	return
257	elif [ -d "$bigdir/$mappath" ] ; then
258	echo "Cannot add $mappath: it's a directory. Sorry."
259	return
260	fi
261	LogFile "INFO: Added kbd map $mappath"
262	if [ ! -e "$mappath" ] ; then
263	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
264	if [ ! -e "$mappath" ] ; then
265	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
266	return
267	fi
268	fi
269
270	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
271	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
272	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
273	else
274	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
275	fi
276	for included_item in $included_list ; do
277	if [ ! -e "$included_item" ] ; then
278	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
279	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
280	for ii in $sss ; do
281	[ -e "$ii" ] && AddKeyboardMappingFile $ii
282	done
283	else
284	AddKeyboardMappingFile $included_item
285	fi
286	done
287	}
288
289
290	CopyDependenciesToDirectory() {
291	local outdir incoming counter d found tdir templog
292	outdir=$1
293	templog=$MINDI_TMP/$$.log
294	mkdir -p $outdir
295	incoming=`ReadLine`
296	counter=$3
297	> $templog
298
299	while [ "$incoming" != "" ] ; do
300	if [ "$3" = "1" ]; then
301	counter=$(($counter+1))
302	LogProgress $counter $2
303	fi
304	# Non absolute file names should not arrive till here => skipped
305	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
306	LogAll "WARNING: Unable to handle $incoming"
307	incoming=`ReadLine`
308	continue
309	fi
310	# no parent directory of incoming should be a link, copy is not possible in that case
311	d=`dirname "$incoming"`
312	found="false"
313	while [ $d != "/" -a $found = "false" ]; do
314	[ -h "$d" ] && found="true"
315	d=`dirname "$d"`
316	done
317	if [ -d "$incoming" -a ! -h "$incoming" ]; then
318	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
319	elif [ -e "$incoming" ] && [ $found = "false" ]; then
320	if [ ! -h "$incoming" ]; then
321	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
322	else
323	tdir=`dirname "$incoming"`
324	if [ ! -e "$outdir/$tdir" ]; then
325	mkdir -p "$outdir/$tdir"
326	fi
327	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
328	fi
329	# Only uncompress modules if not using udevd
330	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
331	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
332	fi
333	[ -x "$outdir" ] && StripExecutable $outdir
334	fi
335	incoming=`ReadLine`
336	done
337	}
338
339
340	CountItemsIn() {
341	local r
342	r=0
343	for q in $1 ; do
344	r=$(($r+1))
345	done
346	echo $r
347	}
348
349
350	DropOptimizedLibraries() {
351	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
352	filelist=$1
353	outdir=$2
354
355	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
356	if [ "$list_of_optimized_libraries" = "" ] ; then
357	return 0
358	fi
359	echo -en "Dropping i686-optimized libraries if appropriate"
360	for optimized_lib_name in $list_of_optimized_libraries ; do
361	echo -en "."
362	reason=""
363	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
364	echo "$vanilla_lib_name" >> $filelist
365	LogFile "INFO: Adding $vanilla_lib_name to filelist"
366	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
367	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
368
369	# This may return multiple files
370	for resolved in `mr-read-all-link $vanilla_lib_name`; do
371	LogFile "INFO: Adding as deps $resolved to filelist"
372	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
373	if [ "$vanilla_resolved_name" != "$resolved" ]; then
374	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
375	rmdir $outdir$resolved > /dev/null 2> /dev/null
376	ln -sf $vanilla_resolved_name $outdir$resolved
377	LogFile "INFO: Excluding deps $resolved"
378	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
379	LogFile "INFO: Replacing it with $vanilla_resolved_name"
380	echo "$vanilla_resolved_name" >> $filelist.tmp
381	mv -f $filelist.tmp $filelist
382	fi
383	done
384	done
385	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
386	mv -f $filelist.tmp $filelist
387	echo -e "$DONE"
388	}
389
390
391	FindAndAddUserKeyboardMappingFile() {
392	local r res mapfile mappath included_item included_list keyfile mp locale
393	LogAll "INFO: Analyzing your keyboard's configuration."
394	KEYDIR=/usr/lib/kbd
395	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
396	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
397	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
398	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
399	if [ ! -e "$KEYDIR" ] ; then
400	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
401	return 0
402	else
403	LogFile "INFO: KEYDIR=$KEYDIR"
404	fi
405	if [ -e "/etc/sysconfig/keyboard" ] ; then
406	LogFile "INFO: Red Hat-style config detected."
407	keyfile=/etc/sysconfig/keyboard
408	elif [ -e "/etc/vconsole.conf" ] ; then
409	LogFile "INFO: New Fedora style config detected."
410	keyfile=/etc/vconsole.conf
411	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
412	LogFile "INFO: Slackware-style config detected."
413	keyfile=/etc/rc.d/rc.keymap
414	elif [ -e "/etc/rc.config" ] ; then
415	LogFile "INFO: Debian-style config detected."
416	keyfile=/etc/rc.config
417	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
418	LogFile "INFO: Debian-style config detected."
419	mkdir -p $bigdir/tmp
420	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
421	KBDEPTH=0
422	mkdir -p $bigdir/etc/console
423	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
424	echo ""
425	echo -e "$DONE"
426	return 0
427	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
428	LogFile "INFO: Ubuntu-style config detected."
429	mkdir -p $bigdir/tmp
430	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
431	kbdfile="/etc/console-setup/boottime.kmap.gz"
432	else
433	kbdfile="/etc/console-setup/cached.kmap.gz"
434	fi
435	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
436	KBDEPTH=0
437	mkdir -p $bigdir/etc/console-setup
438	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
439	echo ""
440	echo -e "$DONE"
441	return 0
442	elif [ -e "/etc/rc.conf" ] ; then
443	LogFile "INFO: ArchLinux config detected."
444	keyfile=/etc/rc.conf
445	elif [ -e "/etc/conf.d/keymaps" ] ; then
446	LogFile "INFO: Gentoo-style config detected."
447	keyfile=/etc/conf.d/keymaps
448	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
449	LogFile "INFO: X11-style config detected."
450	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
451	else
452	LogFile "Searching for rc.config ..."
453	keyfile=`find /etc -name rc.config \| head -n1`
454	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
455	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
456	return
457	else
458	LogFile "INFO: Found $keyfile"
459	fi
460	fi
461	if [ ! -e "$KEYDIR/keymaps" ] ; then
462	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
463	return
464	fi
465	LogFile "INFO: keyfile=$keyfile"
466	# For SLES we need to remove the .map.gz extension Cf #614
467	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
468	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
469	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
470	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
471	LogFile "INFO: locale=$locale"
472	#
473	# Process the keymaps dir once for all
474	# AddKeyboardMappingFile will use it recursively
475	#
476	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
477	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
478	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
479	# For new distro such as RHEL 7 we need that additional search
480	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
481	# If we have multiple keymaps then log it !!
482	echo "$mp" \| grep -q " " >> $LOGFILE
483	if [ $? -eq 0 ]; then
484	LogAll "WARNING: Multiple keymaps found: $mp"
485	LogFile "INFO: The following one will be used"
486	fi
487	for i in $mp ; do
488	mappath=$i
489	[ -e "$i" ] && [ ! -d "$i" ] && break
490	done
491	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
492	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
493	fi
494	LogFile "INFO: mappath = $mappath"
495	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
496	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
497	return
498	fi
499	echo -en "INFO: Adding keyboard mapping tables"
500	mkdir -p $bigdir/tmp
501	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
502	KBDEPTH=0
503	AddKeyboardMappingFile $mappath
504	echo ""
505	echo -e "$DONE"
506	rm -f $MINDI_TMP/keymaps.find
507	return 0
508	}
509
510
511	FindLdlinux32Binary() {
512	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
513	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
514	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
515	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
516	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
517	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
518	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
519	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
520	if [ ! -e "$LDLINUXC32" ]; then
521	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
522	LDLINUXC32=/tmp/idoesnthopefullyexist
523	else
524	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
525	fi
526	}
527
528
529	FindMboot32Binary() {
530	MBOOTC32=/usr/lib/syslinux/mboot.c32
531	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
532	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
533	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
534	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
535	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
536	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
537	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
538	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
539	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
540	}
541
542	FindLdlinuxe64Binary() {
543	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
544	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
545	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
546	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
547	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
548	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
549	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
550	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
551	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
552	}
553
554	FindSyslinux64EFI() {
555	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
556	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
557	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
558	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
559	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
560	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
561	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
562	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
563	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
564	}
565
566	FindIsolinuxBinary() {
567	ISOLINUX=/usr/lib/isolinux.bin
568	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
569	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
570	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
571	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
572	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
573	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
574	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
575	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
576	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
577	}
578
579
580	GenerateGiantDependencyList() {
581	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
582
583	echo -en "INFO: Analyzing dependency requirements"
584	outfile=$1
585	tempfile=$MINDI_TMP/$$.txt
586	incoming=`ReadLine`
587
588	> $tempfile
589	progress=0
590	res=0
591	noof_lines=$2
592	while [ "$incoming" != "" ] ; do
593	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
594	incoming=`ReadLine`
595	continue
596	fi
597	if [ "$incoming" = "LVMFILES:" ] ; then
598	break
599	fi
600	filelist=`GenerateListForFile "$incoming"`
601	r=$?
602	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
603	res=$(($res+$r))
604	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
605	for fname in $filelist ; do
606	[ "$fname" != "" ] && echo "$fname" >> $tempfile
607	done
608	progress=$(($progress+1))
609	LogProgress $progress $noof_lines
610	incoming=`ReadLine`
611	done
612	if [ "$incoming" = "LVMFILES:" ] ; then
613	incoming=`ReadLine`
614	lvmversion=""
615	while [ "$incoming" != "" ] ; do
616	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
617	incoming=`ReadLine`
618	continue
619	fi
620	filelist=`GenerateListForFile "$incoming"`
621	for tool in $filelist ; do
622	lvmresolved=`readlink -f $tool`
623	if [ "$tool" = "$lvmresolved" ]; then
624	echo "$tool" >> $tempfile
625	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
626	if [ "$lvmversion" = "" ] ; then
627	lvmversion=`$lvmresolved`
628	echo "$lvmresolved" >> $tempfile
629	fi
630	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
631	if [ "$lvmversion" = "200" ]; then
632	# pvdata and lvmcreate_initrd don't exist in LVM2
633	case "$toolstripped" in
634	"pvdata")
635	continue
636	;;
637	"lvmcreate_initrd")
638	continue
639	;;
640	esac
641	fi
642	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
643	if [ -e "$toolpath" ] ; then
644	echo "$toolpath" >> $tempfile
645	echo "$tool" >> $tempfile
646	else
647	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
648	fi
649	if [ -e "$toolpath" ] ; then
650	echo "$toolpath" >> $tempfile
651	echo "$tool" >> $tempfile
652	else
653	echo "Where are your LVM-Tools? Couldn't find $tool"
654	fi
655	else
656	echo "$tool" >> $tempfile
657	fi
658	done
659	progress=$(($progress+1))
660	LogProgress $progress $noof_lines
661	incoming=`ReadLine`
662	done
663	fi
664	echo -en "$DONE\nINFO: Making complete dependency list"
665
666	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
667	mv -f $tempfile.new $tempfile
668	> $outfile.pre
669	progress=0
670	noof_lines=`cat $tempfile \| wc -l`
671	LogFile "---------------------------------"
672	LogFile "List of dependencies: "
673	LogFile "---------------------------------"
674	for fname in `cat $tempfile` ; do
675	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
676	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
677	progress=$(($progress+1))
678	LogProgress $progress $noof_lines
679	done
680	if [ _"$MONDO_SHARE" != _"" ]; then
681	mkdir -p $bigdir/tmp
682	mkdir -p $bigdir/usr/bin
683	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
684	LogAll "\nINFO: Incorporating post-nuke tarball"
685	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
686	fi
687	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
688	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
689	else
690	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
691	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
692	LogAll " If Mindi was called by Mondo then send a bug report."
693	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
694	LogAll " Finally, run Mindi again."
695	Die "Odd."
696	fi
697	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
698	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
699	LogAll "\nINFO: Incorporating Network-related settings"
700	for r in NETFS-* ; do
701	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
702	LogFile "INFO: Copying $r to ramdisk"
703	done
704	fi
705	fi
706	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
707	rm -f $tempfile $outfile.pre
708	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
709	return $res
710	}
711
712
713	GenerateListForFile() {
714	local files_found loc fname incoming i res
715	incoming="$1"
716	files_found=""
717	res=0
718
719	for fname in $incoming ; do
720	files_found="$files_found `LocateFile $fname`"
721	done
722
723	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
724	}
725
726
727	# Returns all disk devices which are part of a raid array
728	GetAllRaidMembers() {
729	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
730	}
731
732
733	GetFileSizeList() {
734	local i
735	for i in `find $1 -type d -o -print` ; do
736	du -sk $i
737	done
738	}
739
740
741	# Check kernel filesystem capabilites for accessing initrd image
742	# Could be ext2 FS (old mode) or initramfs (new mode)
743	#
744	# Interface definition:
745	# param #1: absolute path to kernel image
746	GetInitrdFilesystemToUse() {
747
748	# interface test: make sure we have one parameter
749	if [ $# -ne 1 ]; then
750	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
751	fi
752
753	# interface parameters
754	local lvKernelImage=$1
755
756	# local constants (filesystem magic strings)
757	local lcMagicCramfs="<3>cramfs: wrong magic"
758	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
759	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
760	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
761
762	# local variables
763	local lvOffset
764	local lvScanRes
765	local lvUseFilesystem
766
767	# say where we are.
768	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
769
770	# verify that file exists
771	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
772
773	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
774	file $lvKernelImage 2>&1 \| grep -q gzip
775	if [ $? -eq 0 ]; then
776	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
777	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
778	else
779	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
780	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
781	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
782	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
783	if [ $lvOffset -eq 0 ]; then
784	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
785	lvScanRes=$lcMagicInitfs
786	else
787	lvOffset=`expr $lvOffset / 2`
788	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
789	# scan again kernel image
790	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
791	fi
792	fi
793
794	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
795	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
796	lvUseFilesystem="ext2fs"
797	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
798	lvUseFilesystem="ext3fs"
799	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
800	lvUseFilesystem="initramfs"
801	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
802	lvUseFilesystem="cramfs"
803	else
804	# In that case, we are most probably after 2.6.30 and use the supported initramfs
805	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
806	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
807	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
808	lvUseFilesystem="initramfs"
809	fi
810
811	# say what we are using
812	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
813
814	# return file system to use
815	echo "$lvUseFilesystem"
816
817	}
818
819	# Searches members of raid device
820	# $1: raid device (/dev/md...)
821	GetRaidDevMembers() {
822	if [ ! -f /etc/raidtab ]; then
823	return
824	fi
825	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
826	}
827
828
829	ListAllPartitions() {
830	local res currline partition all_partitions ap_orig remaining i j
831
832	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
833	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
834	if [ -e "/vmfs/volumes" ]; then
835	# For VMWare ESX 3 get the device names of these volumes
836	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
837	fi
838	return
839	}
840
841
842	ListKernelModulePaths() {
843	local module_list module fname r kern
844	module_list="$MODULES"
845	# Remove unwanted modules from list
846	for i in $DENY_MODS; do
847	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
848	done
849	###
850	### Sq-Modification ... Use kernelname for module search path if specified
851	###
852	if [ "${kernelname}" != "" ]
853	then
854	kern=${kernelname}
855	else
856	kern="$KERVERRUN"
857	fi
858	export KERVER=$kern
859	###
860	### Sq-Mod End
861	###
862	# Get rid of duplicates
863	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
864	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
865	if [ -z "$r" ]; then
866	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
867	r="[live module file not found]"
868	else
869	r="[extra module file not found]"
870	fi
871	else
872	[ -f "$r" ] && echo "$r"
873	fi
874	LogFile "INFO: module $module --> $r"
875	done
876	find /lib/modules/$kern/modules.* -type f 2> /dev/null
877	}
878
879	#
880	# Critical function which computes all dependencies (dyn. lib.)
881	# for a list of binaries
882	#
883	LocateDeps() {
884	local incoming fname deps
885	incoming="$*"
886	deps=""
887
888	for fname in $incoming ; do
889	if [ ! -e "$fname" ] ; then
890	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
891	if echo $fname \| grep lvm &> /dev/null ; then
892	LogFile " This warning only affects you if you are using LVM."
893	if echo "$MODULES" \| grep lvm &> /dev/null ; then
894	LogFile " I think you are, so please take heed!"
895	else
896	LogFile " I don't think you are, so don't worry about it."
897	fi
898	fi
899	else
900	deps="$deps $fname"
901	fi
902	done
903	mr-read-all-link `mr-process-ldd $deps \| sort -u` \| sort -u
904	}
905
906
907	LocateFile() {
908	local i j path fname_to_find location output resolved tmp stub cache_id loclist
909	fname_to_find="$1"
910	# It's an absolute path
911	j=`echo "$fname_to_find" \| cut -c1`
912	if [ _"$j" = _"/" ]; then
913	dn=`dirname $fname_to_find`
914	# We suppose that the link is already included, just add the new file
915	if [ -h "$dn" ]; then
916	newdn=`readlink -f $dn`
917	bn=`basename $fname_to_find`
918	output="$newdn/$bn"
919	else
920	output="$fname_to_find"
921	fi
922	if [ -h "$output" ] ; then
923	output="`mr-read-all-link $output` $output"
924	fi
925	echo "$output"
926	return 0
927	fi
928	# It's not an absolute path
929	output=""
930	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
931	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
932	[ -h "$path" ] && continue
933	[ ! -e "$path/$fname_to_find" ] && continue
934	output="$path/$fname_to_find $output"
935	if [ -h "$path/$fname_to_find" ] ; then
936	output="`mr-read-all-link $path/$fname_to_find` $output"
937	fi
938	done
939	if [ "$output" = "" ] ; then
940	return 1
941	fi
942	echo "$output"
943	return 0
944	}
945
946	LogProgress() {
947	local i progress modres noof_lines title
948
949	progress=$1
950	noof_lines=$2
951	title=$3
952
953	i=$(($progress*100))
954	if [ $noof_lines -ne 0 ]; then
955	i=$(($i/$noof_lines))
956	else
957	i=0
958	fi
959
960	if [ _"$MONDO_SHARE" != _"" ]; then
961	echo "$title $i%"
962	else
963	echo -en "\r\t\t\t\t\t\t\t\t"
964	echo -en "$i"
965	echo -en "%"
966	modres=$(($progress%4))
967	[ "$modres" -eq "0" ] && echo -en "\t/"
968	[ "$modres" -eq "1" ] && echo -en "\t-"
969	[ "$modres" -eq "2" ] && echo -en "\t\\"
970	[ "$modres" -eq "3" ] && echo -en "\t\|"
971	fi
972	}
973
974	# Called by MakeBootInitFile, to make /tmp/$MRCFG
975	MakeMondoConfigFile() {
976	local outfile use_lzo use_comp use_star
977	outfile=$1
978	> $outfile
979	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
980	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
981	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
982	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
983	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
984	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
985	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
986	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
987	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
988	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
989	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
990	echo "use-lzo $use_lzo" >> $outfile
991	echo "use-gzip $use_gzip" >> $outfile
992	echo "use-star $use_star" >> $outfile
993	echo "use-lzma $use_lzma" >> $outfile
994	echo "use-comp $use_comp" >> $outfile
995	echo "boot-type $BOOT_TYPE" >> $outfile
996	echo "datestamp `date`" >> $outfile
997	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
998	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
999	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
1000	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
1001	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
1002	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1003	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
1004	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
1005	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1006	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1007	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
1008	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
1009	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
1010	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
1011
1012	# Deal with network configuration in a portable way
1013	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1014	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1015	fi
1016	}
1017
1018	# Get PV's for an LV
1019	GetPVsForLV() {
1020	if [ -n "$1" ]; then
1021	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
1022	if [ -z "$vg" ]; then
1023	return
1024	fi
1025	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
1026	fi
1027	}
1028
1029
1030	MakeMountlist() {
1031	local mountlist all_partitions current_partition \
1032	partition_size partition_format outstring partition_number \
1033	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1034	absolute_partition old_partition_fmt current_lvolume uname skip
1035
1036	LogFile "------------------------------------"
1037	LogFile "INFO: Your raw fstab file looks like this:"
1038	LogFile "------------------------------------"
1039	cat $MY_FSTAB >> $LOGFILE
1040	LogAll "-----------------------------------"
1041	LogAll "INFO: Your mountlist will look like this:"
1042	LogAll "-----------------------------------"
1043
1044	# mountlist(OUT)
1045	mountlist=$1
1046
1047	# NB: partition = device
1048	# NB: mountpt = where the device is mounted
1049
1050	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
1051
1052	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1053	> $mountlist
1054	all_partitions=""
1055
1056	if [ $LVM != "false" ]; then
1057	LogFile "INFO: Analyzing LVM..."
1058	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1059	if [ $? -ne 0 ]; then
1060	LVM="false"
1061	fi
1062	# Excluded LVs and GVs are not reported here
1063	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
1064	fi
1065	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1066	for i in $IMAGE_DEVS ; do
1067	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1068	done
1069	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
1070	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
1071	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
1072	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1073	for c_p in $all_partitions ; do
1074	# Skip fd/cd devices, network FS, cifs
1075	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
1076	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
1077	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
1078	current_partition=`readlink -f $c_p`
1079	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
1080	current_partition="$c_p"
1081	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
1082	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1083	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1084	fi
1085	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
1086	else
1087	current_partition="$c_p"
1088	fi
1089	[ "$c_p" = "none" ] && continue
1090	redhat_label=""
1091	label=""
1092	uuid=""
1093	absolute_partition=`readlink -f $c_p`
1094	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1095
1096	# set default in case we dont't find it
1097	str_to_find_fmt_with=$current_partition
1098
1099	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1100	# current_partition contains only first column of /etc/fstab
1101	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
1102	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
1103	actual_dev=""
1104
1105	# 1st try, findfs - the RHEL way of finding labels and their partitions
1106	if [ -x "/sbin/findfs" ]; then
1107	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1108	fi
1109
1110	# 2nd try : blkid, the good way for all LABEL except swap
1111	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1112	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
1113	# For LVM FS it will give a /dev/dm-# which should then be converted
1114	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1115	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1116	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1117	for dev in `ls /dev/mapper/*`; do
1118	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1119	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1120	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1121	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1122	break
1123	fi
1124	done
1125	fi
1126	fi
1127
1128	# 3rd try, which works on a standard partition (ext2/3), but not on swap
1129	# For LVM gives a /dev/mapper entry
1130	if [ "x$actual_dev" = "x" ]; then
1131	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
1132	fi
1133
1134	# 4th try, with vol_id
1135	# SWAP only
1136	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1137	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
1138	for dev_swap in $list_swaps ; do
1139	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
1140	if [ "x$dev_exists" != "x" ]; then
1141	actual_dev=$dev_swap
1142	break;
1143	fi
1144	done
1145	fi
1146
1147	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1148	# LABEL=SW-cciss/c0d0p3 (RDP)
1149	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1150	# SWAP only
1151	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
1152	skip=""
1153	uname=$KERVERRUN
1154	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
1155	# 2.6.12 needs 16 (FC3)
1156	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
1157	# 2.6.19 and upper needs 1052
1158	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
1159	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
1160	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
1161	if [ $skip = "" ]; then
1162	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1163	fi
1164	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
1165	do
1166	# Location of the swap label for kernel 2.6
1167	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1168	if [ "x$try_dev_label" = "x$redhat_label" ]; then
1169	actual_dev=$try_dev
1170	fi
1171	done
1172	fi
1173
1174	# Check if one of all those tries has known success
1175	if [ "x$actual_dev" != "x" ]; then
1176	current_partition=$actual_dev
1177	else
1178	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1179	fi
1180	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
1181	# current_partition contains only first column of /etc/fstab
1182	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
1183	uuid=`echo "$current_partition" \| cut -d'=' -f2`
1184	actual_dev=""
1185
1186	# 1st try, findfs - the RHEL way of finding labels and their partitions
1187	if [ -x "/sbin/findfs" ]; then
1188	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1189	fi
1190
1191	# 2nd try : blkid, the good way for all UUID except swap
1192	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1193	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
1194	# For LVM FS it will give a /dev/dm-# which should then be converted
1195	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1196	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1197	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1198	for dev in `ls /dev/mapper/*`; do
1199	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1200	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1201	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1202	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1203	break
1204	fi
1205	done
1206	fi
1207	fi
1208
1209	# 3th try, with vol_id
1210	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1211	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
1212	for dev in $list_dev ; do
1213	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
1214	if [ "x$dev_exists" != "x" ]; then
1215	actual_dev=$dev
1216	break;
1217	fi
1218	done
1219	fi
1220
1221	# 4th try, with dumpuuid (VMWare only ?) for swap
1222	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1223	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
1224	for dev in $list_dev ; do
1225	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
1226	if [ "x$dev_exists" != "x" ]; then
1227	actual_dev=$dev
1228	break;
1229	fi
1230	done
1231	fi
1232
1233	# Check if one of all those tries has known success
1234	if [ "x$actual_dev" != "x" ]; then
1235	current_partition=$actual_dev
1236	else
1237	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1238	fi
1239	else
1240	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1241	# they use symlinks in fstab unrelated to what is shown in mount !
1242	if [ _"$partition_mountpt" = _"" ]; then
1243	# set default in case we dont't find it
1244	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
1245	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1246	str_to_find_fmt_with=$tmpp
1247	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1248	break;
1249	fi
1250	done
1251	fi
1252	fi
1253
1254	# Detects noauto partitions not mounted and exclude them
1255	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
1256	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
1257	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1258	continue
1259	fi
1260	# Detects bind partitions and exclude them
1261	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
1262	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1263	continue
1264	fi
1265
1266	# Look for devices which have to be excluded
1267	skip=0
1268	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1269	l=""
1270	list_of_devices="`mr-read-all-link $current_partition`"
1271	for d in $list_of_devices; do
1272	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1273	done
1274
1275	# Remove PVs from LVs excluded
1276	l="$l `GetPVsForLV $current_partition`"
1277
1278	# We want a single unique list
1279	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
1280
1281	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
1282	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
1283	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1284	skip=1
1285	continue
1286	fi
1287	done
1288	fi
1289	if [ $skip -eq 1 ]; then
1290	continue
1291	fi
1292
1293	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1294	# Detects iso9660 ISO images and exclude them
1295	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
1296	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1297	continue
1298	fi
1299	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1300	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1301	# the former is then a link to the latter, so we test whether
1302	# $current_partition is actually such a link or not and set
1303	# $current_lvolume accordingly. On Debian you may find more than one answer
1304	# so we remove the one corresponding to /dev/.static
1305	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1306	# principle is the same and we need to find the link to it as well.
1307	# Note that $current_lvolume may well be an
1308	# ordinary device. It is just to make sure that we feed the right value
1309	# into any of the LVM tools if possible.
1310
1311	current_lvolume="$current_partition"
1312	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
1313	# .static dir are a Debian specificity
1314	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
1315	echo $current_lvolume \| grep -q ' '
1316	if [ $? -eq 0 ]; then
1317	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1318	fi
1319	# if it's not found, it may well be a real device such as a multipath one
1320	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1321	if [ _"$current_lvolume" = _"" ]; then
1322	current_lvolume="$current_partition"
1323	fi
1324	fi
1325	#
1326	# End of LVM device style variation code (other than $current_lvolume).
1327
1328	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1329	# Size computed via LVM not directly
1330	partition_size="lvm"
1331	else
1332	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
1333	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
1334	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
1335	# Skip swap files
1336	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
1337	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
1338	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1339	[ "$partition_format" != "swap" ] && partition_format="swap"
1340	if [ "$partition_size" = "" ] ; then
1341	totalsize=0
1342	items=0
1343	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
1344	totalsize=$(($totalsize+$i))
1345	items=$(($items+1))
1346	done
1347	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
1348	[ "$partition_size" -lt "125000" ] && partition_size=125000
1349	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1350	fi
1351	else
1352	partition_size=`SizeOfPartition $current_partition`
1353	fi
1354	fi
1355	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
1356	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
1357	if [ "$partition_mountpt" = "" ] ; then
1358	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1359	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1360	partition_mountpt="raid"
1361	partition_format="raid"
1362	else
1363	partition_mountpt="lvm"
1364	partition_format="lvm"
1365	fi
1366	fi
1367	fi
1368	psz=$partition_size
1369	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1370	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
1371	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
1372	partition_mountpt="image"
1373	old_partition_fmt=$partition_format
1374	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
1375	partition_size=$(($partition_size+1)); # just in case
1376	if [ "$partition_format" = "Linux" ] ; then
1377	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1378	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1379	partition_format=$old_partition_fmt
1380	fi
1381	fi
1382
1383	if [ ! "$partition_mountpt" ] ; then
1384	LogFile "------- $FDISK -l $qq log ------------"
1385	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
1386	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
1387	[ "$partition_format" ] && break
1388	done
1389	LogFile "------- $FDISK log end ------------"
1390	if [ "$partition_format" = "Compaq diagnostics" ] ; then
1391	partition_format="compaq"
1392	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1393	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1394	continue
1395	fi
1396	fi
1397	if [ "$redhat_label" ]; then
1398	label="$redhat_label"
1399	elif [ "$uuid" ]; then
1400	label="$uuid"
1401	fi
1402
1403	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1404	# in order to mount the root part e.g. in grub.
1405	# One way to solve this is to add the UUID now, if there wasn't one so it's
1406	# restored correctly
1407	if [ _"$label" = _"" ]; then
1408	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1409	fi
1410
1411	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1412	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1413	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1414	if [ "$current_partition" = "" ] ; then
1415	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1416	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1417	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
1418	partition_mountpt=raid
1419	partition_format=raid
1420	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1421	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1422	else
1423	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1424	fi
1425	elif [ "$partition_format" = "" ] ; then
1426	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1427	elif [ "$partition_size" = "" ] ; then
1428	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1429	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
1430	continue
1431	else
1432	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
1433	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1434	partition_format="vfat"
1435	fi
1436	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1437	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1438	fi
1439	done
1440	LogAll "-----------------------------------"
1441	}
1442
1443	CheckMountlist() {
1444	local file=$1
1445	# Coherency verification
1446	ML01=`cat $file \| wc -l`
1447	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
1448	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
1449	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
1450	if [ "$ML01" -ne "$ML1" ]; then
1451	LogFile "--------------------------------------------"
1452	LogAll "WARNING: Duplicate device entry in mountlist"
1453	LogFile "--------------------------------------------"
1454	fi
1455	if [ "$ML02" -ne "$ML2" ]; then
1456	LogFile "--------------------------------------------"
1457	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1458	LogFile "------------------------------------------------"
1459	fi
1460	}
1461
1462
1463	MakeISOErrors() {
1464
1465	LogFile "----------- $ISO_CMD's errors --------------"
1466	LogAll "$ISO_CMD returned the following errors:"
1467	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
1468	LogAll "ERROR: Failed to create ISO image."
1469	}
1470
1471	MakeISO() {
1472
1473	LogAll "INFO: Invoking $CMD ."
1474	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1475	if [ $? -ne 0 ] ; then
1476	if [ "$BOOT_TYPE" = "UEFI" ]; then
1477	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
1478	LogAll "INFO: Invoking instead $CMD"
1479	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1480	if [ $? -eq 0 ] ; then
1481	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1482	else
1483	MakeISOErrors
1484	fi
1485	else
1486	MakeISOErrors
1487	fi
1488	else
1489	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1490	fi
1491	rm -f $MINDI_TMP/mkisofs.log
1492	}
1493
1494	MakeBootableDevice() {
1495
1496	local target tbc retval part size mount_opt
1497
1498	target="$1"
1499
1500	rm -Rf $MINDI_TMP/target
1501	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1502
1503	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1504	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1505	for i in memdisk memtest.bin memtest.img ; do
1506	j=$MINDI_LIB/$i
1507	k=$MINDI_TMP/target
1508	if [ -e "$j" ] ; then
1509	LogAll "INFO: Copying $j to $k"
1510	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
1511	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
1512	if [ _"$MONDO_SHARE" != _"" ]; then
1513	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
1514	fi
1515	fi
1516	done
1517
1518	retval=0
1519	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1520	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1521	if [ $? -ne 0 ] ; then
1522	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1523	retval=$(($retval+1))
1524	fi
1525	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1526	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1527	if [ $? -ne 0 ] ; then
1528	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1529	retval=$(($retval+1))
1530	fi
1531
1532	# copy boot stuff now generated in PrepareDataDiskImage
1533	if [ "$BOOT_TYPE" = "UEFI" ]; then
1534	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1535	tbc="EFI"
1536	# Also prepare a BIOS compatible boot
1537	if [ "$target" = "ISO" ]; then
1538	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1539	fi
1540	else
1541	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1542	tbc="syslinux"
1543	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1544	LogFile "----------- syslinux's conf --------------"
1545	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1546	LogFile "------------------------------------------"
1547	fi
1548	if [ "$target" = "ISO" ]; then
1549	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1550	if [ $? -ne 0 ] ; then
1551	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1552	retval=$(($retval+1))
1553	fi
1554	fi
1555	fi
1556
1557	if [ "$ARCH" != "ia64" ] ; then
1558	if [ $KERNEL_IS_XEN = "yes" ]; then
1559	FindMboot32Binary
1560	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1561	if [ $? -ne 0 ] ; then
1562	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1563	retval=$(($retval+1))
1564	fi
1565	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
1566	if [ $? -ne 0 ] ; then
1567	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1568	retval=$(($retval+1))
1569	fi
1570	fi
1571	fi
1572
1573	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1574
1575	if [ _"$MONDO_SHARE" != _"" ]; then
1576	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1577	if [ $? -ne 0 ] ; then
1578	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1579	LogAll " Please check the target directory."
1580	retval=$(($retval+1))
1581	fi
1582	if [ $KERNEL_IS_XEN = "yes" ]; then
1583	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1584	if [ $? -ne 0 ] ; then
1585	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1586	LogAll " Please check the target directory."
1587	retval=$(($retval+1))
1588	fi
1589	fi
1590	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1591	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1592	if [ $? -ne 0 ] ; then
1593	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1594	LogAll " Please check the target directory."
1595	retval=$(($retval+1))
1596	fi
1597	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1598	if [ $? -ne 0 ] ; then
1599	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1600	LogAll " Please check the target directory."
1601	retval=$(($retval+1))
1602	fi
1603	fi
1604
1605	if [ -f "$MINDI_TMP/$MRCFG" ]; then
1606	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1607	fi
1608
1609	LogFile "----------- target dir content -----------"
1610	LogFile "------------------------------------------"
1611	ls -lR $MINDI_TMP/target >> $LOGFILE
1612	LogFile "------------------------------------------"
1613	LogFile "----------- target dir sizes -------------"
1614	du -sk $MINDI_TMP/target/* >> $LOGFILE
1615	LogFile "------------------------------------------"
1616
1617	if [ "$retval" -ne "0" ] ; then
1618	LogFile "--------------------------------"
1619	LogFile "INFO: Size of $MINDI_TMP/target:"
1620	du -sk $MINDI_TMP/target/* >> $LOGFILE
1621	LogFile "--------------------------------"
1622	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1623	sync
1624	umount $MINDI_TMP/target
1625	LogAll "ERROR: Problems while creating boot media."
1626	LogAll " Please unload some of your modules and try again."
1627	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1628	fi
1629
1630	mkdir -p $MINDI_TMP/mpt
1631
1632	if [ "$target" = "USB" ]; then
1633	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1634	LogAll "INFO: Checking $USBDEVICE"
1635	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1636	if [ $? -ne 0 ]; then
1637	LogAll "ERROR: Unable to access $USBDEVICE"
1638	LogAll " Make sure your USB device is plugged in"
1639	MindiExit -1
1640	fi
1641	# Some distro do auto mount at that point (Ubuntu)
1642	LogAll "INFO: Unmounting $USBPART just in case"
1643	sync
1644	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1645	if [ "$BOOT_TYPE" = "BIOS" ]; then
1646	# If your key has no MBR it may cause an issue
1647	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1648	if [ -r $MBRFILE ]; then
1649	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1650	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1651	else
1652	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1653	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1654	fi
1655	fi
1656	LogAll "INFO: Preparing $USBDEVICE"
1657	cat > $MINDI_TMP/fdisk.txt << EOF
1658	d
1659	d
1660	d
1661	d
1662	n
1663	p
1664	1
1665
1666
1667	t
1668	b
1669	a
1670	1
1671	w
1672	EOF
1673	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1674	if [ $? -ne 0 ]; then
1675	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1676	LogAll " Make sure your USB device is plugged in"
1677	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1678	MindiExit -1
1679	fi
1680	LogFile "fdisk build file"
1681	LogFile "----------------"
1682	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1683	LogFile "----------------"
1684	rm -f $MINDI_TMP/fdisk.txt
1685	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1686	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1687	# Calling kpartx in case devices were not created
1688	if [ -x "/sbin/kpartx" ]; then
1689	/sbin/kpartx -a $USBDEVICE
1690	fi
1691	# Some distro do auto mount at that point (Ubuntu)
1692	LogAll "INFO: Unmounting $USBPART just in case again"
1693	sync
1694	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1695	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1696	if [ "`which dmsetup`" != "" ]; then
1697	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
1698	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
1699	LogAll "INFO: Removing $block_id from device mapper."
1700	sleep 1
1701	dmsetup remove $block_id
1702	fi
1703	fi
1704	part=$USBPART
1705	mount_opt=""
1706	else
1707	# ISO image
1708	part=$MINDI_TMP/mindi-bootroot.img
1709	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
1710	# Adds 10 MB to allow for additional space
1711	size=$(($size+10000))
1712	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1713	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
1714	mount_opt="-o loop"
1715	fi
1716
1717	LogAll "INFO: Creating a vfat filesystem on $part"
1718
1719	mkfs.vfat $part 2>&1 >> $LOGFILE
1720	if [ $? -ne 0 ]; then
1721	LogAll "ERROR: Unable to create a vfat filesystem on $part"
1722	if [ "$target" = "USB" ]; then
1723	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1724	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1725	fi
1726	MindiExit -1
1727	fi
1728	if [ "$target" = "ISO" ]; then
1729	if [ "$BOOT_TYPE" = "BIOS" ]; then
1730	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
1731	# and run after the formating for versions > 6 it seems
1732	syslinux $part >> $LOGFILE 2>> $LOGFILE
1733	fi
1734	fi
1735	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1736	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1737	if [ $? -ne 0 ]; then
1738	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1739	if [ "$target" = "USB" ]; then
1740	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1741	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1742	fi
1743	MindiExit -1
1744	fi
1745
1746	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1747	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1748	if [ $? -ne 0 ] ; then
1749	LogFile "--------------------------------"
1750	LogFile "INFO: Size of $MINDI_TMP/mpt:"
1751	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1752	LogFile "--------------------------------"
1753	sync
1754	umount $MINDI_TMP/mpt
1755	LogAll "ERROR: Problems while creating boot media."
1756	LogAll " Please unload some of your modules and try again."
1757	Die " Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1758	fi
1759
1760	if [ "$target" = "ISO" ]; then
1761	if [ "$ARCH" != "ia64" ]; then
1762	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1763	fi
1764	# ISO
1765	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1766	CMD="$ISO_CMD $ISO_OPT"
1767	MakeISO
1768	else
1769	if [ "$ARCH" = "ia64" ]; then
1770	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1771	else
1772	# UEFI
1773	echo "$CMD" \| grep -q "xorriso"
1774	if [ $? -eq 0 ]; then
1775	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
1776	else
1777	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1778	fi
1779	fi
1780	fi
1781	fi
1782
1783	# Avoids graphical tool to keep the FS mounted
1784	sync
1785	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
1786
1787	if [ "$target" = "ISO" ]; then
1788	cp $part $MINDI_CACHE
1789	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
1790	# We just need the EFI dir and the boot image for this case
1791	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1792	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1793	# We need again the kernel+initrd at the root for UEFI boot at least
1794	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1795	# We need the boot image now and what mindi needs at restore time as well
1796	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1797	# Avoids graphical tool to keep the FS mounted
1798	sync
1799	umount $MINDI_TMP/mpt2
1800	LogFile "----------- target dir content -----------"
1801	LogFile "------------------------------------------"
1802	ls -lR $MINDI_TMP/mpt >> $LOGFILE
1803	LogFile "------------------------------------------"
1804	MakeISO
1805	fi
1806	else
1807	# USB
1808	if [ "$ARCH" != "ia64" ] ; then
1809	syslinux -v 2>&1 \| grep -q 4.02
1810	if [ $? -eq 0 ]; then
1811	# This buggy version of syslinux requires a call to --stupid and not -s
1812	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1813	res=$?
1814	else
1815	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1816	res=$?
1817	fi
1818	if [ $res -ne 0 ] ; then
1819	LogAll "----------- syslinux's errors --------------"
1820	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
1821	LogAll "------------------------------------------"
1822	LogAll "ERROR: Failed to create USB image."
1823	else
1824	LogFile "INFO: Created bootable USB image on $USBDEVICE"
1825	fi
1826	rm -f $MINDI_TMP/syslinux.log
1827	else
1828	LogAll "ERROR: No USB boot support for ia64"
1829	MindiExit -1
1830	fi
1831	fi
1832	}
1833
1834
1835	OfferToMakeBootableUSB() {
1836
1837	local i files
1838
1839	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1840	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1841	read i
1842	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1843	if [ "$USBDEVICE" = "" ]; then
1844	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1845	read dev
1846	USBDEVICE=$dev
1847	fi
1848	echo "WARNING: This will erase all content on $USBDEVICE"
1849	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1850	read i
1851	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1852	else
1853	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1854	Die "No USBDEVICE environment variable declared, aborting"
1855	fi
1856	fi
1857	USBPART="${USBDEVICE}1"
1858
1859	MakeBootableDevice USB
1860	}
1861
1862
1863	OfferToMakeBootableISO() {
1864
1865	local i files
1866
1867	if [ -z "$ISO_CMD" ]; then
1868	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1869	return
1870	fi
1871
1872	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1873	echo -en "\nShall I make a bootable CD image? (y/[n]) "
1874	read i
1875	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1876	fi
1877
1878	MakeBootableDevice ISO
1879
1880	}
1881
1882
1883	MakeMessageFile() {
1884
1885	if [ -x "/bin/lsb_release" ]; then
1886	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
1887	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
1888	DESC="Arch Linux"
1889	if [ -r /var/log/pacman.log ]; then
1890	# there are no releases but we can get the last system upgrade
1891	# Output example: Arch Linux [2011-03-03 01:39]
1892	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
1893	fi
1894	elif [ -x "/etc/os-release" ]; then
1895	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
1896	elif [ -x "/usr/bin/pbdistrocheck" ]; then
1897	# For pb >= 0.9.8
1898	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
1899	elif [ -r /etc/issue.net ]; then
1900	DESC=`head -1 /etc/issue.net`
1901	elif [ -r /etc/issue ]; then
1902	DESC=`head -1 /etc/issue`
1903	else
1904	DESC="Unknown desc"
1905	fi
1906	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
1907	if [ _"$MONDO_SHARE" != _"" ]; then
1908	if [ "$CDRECOVERY" != "yes" ] ; then
1909	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1910	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1911	echo -en "$BOOT_MEDIA_MESSAGE"
1912	elif [ ! "$MINDI_TMP" ] ; then
1913	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1914	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1915	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1916	fi
1917	else
1918	echo -en "$BOOT_MEDIA_MESSAGE"
1919	fi
1920	else
1921	echo -en "\
1922	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1923	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1924	fi
1925	fi
1926
1927	# Also create the other help screens
1928	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
1929	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
1930	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
1931	}
1932
1933
1934	MakeBootConfFile() {
1935	local options i ooo
1936	options=""
1937	# Type of boot file (elilo or syslinux/isolinux)
1938	type=$1
1939	if [ "$type" = "elilo" ]; then
1940	sep="="
1941	sepdef="="
1942	else
1943	sep=" "
1944	sepdef=" "
1945	if [ "$type" = "grub" ]; then
1946	sepdef="="
1947	fi
1948	fi
1949
1950	# Generic header for conf file
1951	if [ "$type" = "elilo" ]; then
1952	echo -en "prompt\n"
1953	elif [ "$type" = "grub" ]; then
1954	echo -en "pause Press a key when ready to restore\n"
1955	elif [ "$type" = "grub2" ]; then
1956	echo -en "set "
1957	else
1958	# syslinux family
1959	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1960	fi
1961
1962	# Compute which default option to boot from
1963	echo -en "default${sepdef}"
1964	if [ "$CDRECOVERY" = "yes" ] ; then
1965	if [ "$type" = "grub" ]; then
1966	# TODO: Which num ???
1967	echo -en "0\n"
1968	else
1969	echo -en "RESTORE\n"
1970	fi
1971	# In case it's mondoarchive
1972	elif [ _"$MONDO_SHARE" != _"" ]; then
1973	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1974	if [ "$type" = "grub" ]; then
1975	echo -en "3\n"
1976	else
1977	echo -en "iso\n"
1978	fi
1979	else
1980	if [ "$type" = "grub" ]; then
1981	echo -en "1\n"
1982	else
1983	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1984	fi
1985	fi
1986	else
1987	if [ "$type" = "grub" ]; then
1988	echo -en "0\n"
1989	else
1990	echo -en "expert\n"
1991	fi
1992	fi
1993
1994	# Handle timeout
1995	if [ "$type" = "grub" ]; then
1996	sep='='
1997	fi
1998	if [ "$CDRECOVERY" = "yes" ] ; then
1999	echo -en "timeout${sep}10000\n"
2000	else
2001	echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
2002	fi
2003	echo -en "\n"
2004
2005	# prepare which labels will be generated
2006	if [ "$CDRECOVERY" = "yes" ] ; then
2007	options="RESTORE expert"
2008	else
2009	if [ _"$MONDO_SHARE" != _"" ]; then
2010	options="interactive expert compare iso nuke isonuke"
2011	else
2012	options="expert"
2013	fi
2014	fi
2015
2016	# Generate rest of conf file
2017	for i in $options ; do
2018	ooo=$i
2019	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2020	if [ "$type" = "elilo" ]; then
2021	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2022	elif [ "$type" = "grub" ]; then
2023	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2024	elif [ "$type" = "grub2" ]; then
2025	if [ "$BOOT_TYPE" = "UEFI" ]; then
2026	lorder="linuxefi"
2027	iorder="initrdefi"
2028	else
2029	lorder="linux"
2030	iorder="initrd"
2031	fi
2032	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2033	else
2034	ps="/"
2035	if [ $KERNEL_IS_XEN = "no" ]; then
2036	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2037	else
2038	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2039	fi
2040	fi
2041	echo -en "$outstr"
2042	done
2043	if [ -e "$MINDI_LIB/memtest.img" ] ; then
2044	if [ "$type" = "elilo" ]; then
2045	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2046	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2047	elif [ "$type" = "grub" ]; then
2048	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2049	elif [ "$type" = "grub2" ]; then
2050	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2051	else
2052	ps="/"
2053	if [ "$type" = "syslinux" ]; then
2054	ps=""
2055	fi
2056	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2057	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2058	fi
2059	fi
2060	}
2061
2062	ParseModprobeForIncludes() {
2063	local MODPROBE_CONF mpincfile includes include
2064
2065	MODPROBE_CONF=/etc/modprobe.conf
2066	mpincfile=$1
2067	touch $mpincfile
2068	if [ -a $MODPROBE_CONF ]; then
2069	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
2070	if [ -n "$includes" ]; then
2071	for include in $includes
2072	do
2073	if [ -a "$include" ]; then
2074	echo $include >> $mpincfile
2075	fi
2076	done
2077	fi
2078	fi
2079	}
2080
2081	PrepareBootDir() {
2082
2083	local detect
2084	# Needs a bigdir variable setup before calling it
2085
2086	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
2087	# to get it on the media (in addition to the boot part
2088	# and also to support UEFI boot mechanism
2089	if [ "$boottype" != "" ]; then
2090	detect="no"
2091	else
2092	detect="yes"
2093	boottype=syslinux
2094	fi
2095	bootdir=$bigdir/$boottype
2096	bootconf="$bootdir/$boottype.cfg"
2097	mkdir -p $bootdir
2098	FindLdlinux32Binary
2099
2100	if [ "$BOOT_TYPE" != "BIOS" ]; then
2101	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2102	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2103	MindiExit -1
2104	fi
2105
2106	mountefi=0
2107	# EFI or UEFI
2108	# TODO: names are hard-coded for now
2109	if [ "$BOOT_TYPE" = "UEFI" ]; then
2110	# UEFI
2111	efidir=$bigdir/EFI/BOOT
2112	# Auto-detection if needed
2113	if [ $detect = "yes" ]; then
2114
2115	# mount /boot/efi if needed
2116	df -T \| grep /boot/efi \| grep -qE 'vfat'
2117	if [ $? -ne 0 ]; then
2118	mount /boot/efi
2119	if [ $? -ne 0 ]; then
2120	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2121	MindiExit -1
2122	fi
2123	mountefi=1
2124	fi
2125
2126	# On RHEL6 grub works
2127	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
2128	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
2129	if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2130	boottype=grub
2131	elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2132	boottype=grub2
2133	elif [ $dname = "debian" ] && [ $dver = "8" ]; then
2134	boottype=grub2
2135	else
2136	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2137	boottype=syslinux
2138	fi
2139	fi
2140	if [ "$boottype" = "syslinux" ]; then
2141	if [ ! "$bootbin" ]; then
2142	FindSyslinux64EFI
2143	bootbin=$SYSLINUX64EFI
2144	fi
2145	bootconf="$efidir/syslinux.cfg"
2146	elif [ "$boottype" = "grub" ]; then
2147	if [ ! "$bootbin" ]; then
2148	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
2149	fi
2150	bootconf="$efidir/BOOTX64.conf"
2151	elif [ "$boottype" = "grub2" ]; then
2152	if [ ! "$bootbin" ]; then
2153	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
2154	fi
2155	bootconf="$efidir/grub.cfg"
2156	fi
2157
2158	# Depending on the arch, the target boot file is different
2159	if [ "$ARCH" = "x86_64" ] ; then
2160	tgbin="BOOTX64.efi"
2161	elif [ "$ARCH" = "armv8" ]; then
2162	tgbin="BOOTAA64.efi"
2163	else
2164	# i?386
2165	tgbin="BOOTIA32"
2166	fi
2167	else
2168	# EFI
2169	efidir=$bootdir
2170	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
2171	tgbin=$bootbin
2172	boottype=elilo
2173	bootconf="$efidir/elilo.conf"
2174	fi
2175	LogAll "INFO: Found $boottype boot type"
2176	mkdir -p $efidir
2177	cp $bootbin $efidir/$tgbin
2178
2179	if [ $mountefi -eq 1 ]; then
2180	umount /boot/efi 2>&1 > /dev/null
2181	fi
2182
2183	if [ $boottype = "syslinux" ]; then
2184	FindLdlinuxe64Binary
2185	if [ -e "$LDLINUXE64" ]; then
2186	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2187	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2188	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
2189	if [ -e $LDLINUXE64/../isolinux.c32 ]; then
2190	cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
2191	fi
2192	fi
2193	fi
2194	# tgdir for syslinux
2195	tgdir=$bigdir/EFI
2196	else
2197	# tgdir for syslinux
2198	tgdir=$bootdir
2199	fi
2200	# In all cases prepare syslinux content for BIOS mode
2201	# so that we can have multi boot mode media BIOS+UEFI
2202	# Useful for syslinux 5.x
2203	if [ -e "$LDLINUXC32" ]; then
2204	LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
2205	cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
2206	fi
2207	if [ -e $LDLINUXC32/../isolinux.c32 ]; then
2208	LogFile "INFO: Copying isolinux.c32 to $tgdir"
2209	cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
2210	fi
2211
2212	# Here we need to know the ramdisk_size
2213	size_of_all_tools=`du -sk $bigdir \| cut -f1`
2214	export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2215	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2216
2217	MakeBootConfFile $boottype > $bootconf
2218	LogFile "Boot Conf file $bootconf content is:"
2219	LogFile "------------------------------------"
2220	cat $bootconf >> $LOGFILE
2221	LogFile "------------------------------------"
2222	if [ "$BOOT_TYPE" = "UEFI" ]; then
2223	# Also generate the syslinux conf
2224	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2225	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2226	LogFile "---------------------------------------------------"
2227	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2228	LogFile "---------------------------------------------------"
2229	fi
2230
2231	}
2232
2233	PrepareAllTar() {
2234	echo -en "INFO: Tarring and zipping the data content..."
2235	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2236	LogFile "Size of the data content"
2237	LogFile "------------------------"
2238	du -sk $MINDI_CACHE/*gz >> $LOGFILE
2239	LogFile "------------------------"
2240	echo -e "$DONE"
2241
2242	[ "$bigdir" != "/" ] && rm -rf $bigdir
2243	}
2244
2245	PrepareDataDiskImages() {
2246	local needlist bigdir diskdir res i j k lines lfiles includefile
2247
2248	rm -f $MINDI_CACHE/mindi.iso
2249	needlist=$MINDI_TMP/what-we-need.txt
2250	bigdir=$MINDI_TMP/bigdir
2251	mkdir -p $bigdir/usr/bin
2252	mkdir -p $bigdir/usr/sbin
2253	includefile=$MINDI_TMP/$$.includefile.txt
2254
2255	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
2256	if [ -e "$DEPLIST_FILE" ]; then
2257	lfiles="$DEPLIST_FILE $lfiles"
2258	fi
2259	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
2260	ParseModprobeForIncludes $includefile
2261	lines=$(($lines+`cat $includefile \| wc -l`))
2262	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
2263	res=$?
2264	rm -f $includefile
2265	ListKernelModulePaths >> $needlist
2266	if [ "$res" -ne "0" ] ; then
2267	Die "You have $res files present in dependency list\nbut absent from filesystem."
2268	fi
2269	mkdir -p $bigdir/tmp
2270	if [ _"$MONDO_SHARE" != _"" ]; then
2271	# TODO: no reason to have the cfg file stored twice
2272	MakeMondoConfigFile $MINDI_TMP/$MRCFG
2273	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2274	fi
2275
2276	# Needs to be done after the MRCFG creation
2277	FindAndAddUserKeyboardMappingFile
2278
2279	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2280	DropOptimizedLibraries $needlist $bigdir
2281	echo -en "INFO: Assembling dependency files"
2282
2283	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2284	rm -f $needlist
2285	echo -e "$DONE"
2286
2287	# also copy io.sys and msdos.sys, if we can find them
2288	for i in `mount \| cut -d' ' -f3` ; do
2289	for j in io.sys msdos.sys ; do
2290	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2291	done
2292	done
2293
2294	# master boot record, too
2295	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2296	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2297	LogAll "INFO: Backing up $i's MBR"
2298	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2299	sleep 1
2300	sync
2301	j=$i
2302	[ -h "$j" ] && j=`readlink -f $j`
2303	LogAll "INFO: Creating /dev/boot_device ($j)"
2304	mkdir -p $bigdir/dev
2305	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
2306	fi
2307
2308	# Get terminfo content
2309	ti="usr/share/terminfo/l"
2310	if [ -d /$ti ]; then
2311	mkdir -p $bigdir/$ti
2312	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
2313	fi
2314	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2315	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2316	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2317	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2318	fi
2319	if [ -d "/lib/dev-state" ]; then
2320	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2321	fi
2322	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
2323	MakeMountlist $MINDI_TMP/mountlist.txt
2324	CheckMountlist $MINDI_TMP/mountlist.txt
2325	mkdir -p $bigdir/tmp
2326	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2327	if [ _"$MONDO_SHARE" != _"" ]; then
2328	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2329	fi
2330	if [ $LVM != "false" ]; then
2331	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2332	if [ $? -ne 0 ]; then
2333	LVM="false"
2334	rm -f $bigdir/tmp/i-want-my-lvm
2335	else
2336	LogFile "Your i-want-my-lvm file content is:"
2337	LogFile "-----------------------------------"
2338	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2339	LogFile "-----------------------------------"
2340	fi
2341	fi
2342	LogFile "INFO: Your mountlist.txt file content is:"
2343	LogFile "-----------------------------------"
2344	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2345	LogFile "-----------------------------------"
2346
2347	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2348	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2349	if [ _"$MONDO_SHARE" != _"" ]; then
2350	for q in filelist.full.gz biggielist.txt ; do
2351	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2352	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2353	done
2354	fi
2355
2356	PrepareBootDir
2357	PrepareAllTar
2358	}
2359
2360
2361	Prompt() {
2362	echo -en "$1"
2363	read line
2364	}
2365
2366
2367	ReadLine() {
2368	local i incoming
2369	read incoming
2370	i=0
2371	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2372	i=$(($i+1))
2373	read incoming
2374	done
2375	echo "$incoming"
2376	}
2377
2378
2379	SizeOfPartition() {
2380	local devpath drive res stub
2381	device=$1
2382	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
2383	Die "Cannot find $device's size - is your /etc/fstab sane?"
2384	fi
2385	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
2386	res=`SizeOfRaidPartition $device`
2387	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2388	echo "$res"
2389	return 0
2390	fi
2391	# patch from Bill <bill@iwizard.biz> - 2003/08/25
2392	res=`$FDISK -s $device 2>> $LOGFILE`
2393	# end patch
2394	# take only the first in case of multiple mount (cifs, nfs, ...)
2395	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
2396	[ "$res" = "" ] && res="-1"
2397	echo $res
2398	return 0
2399	}
2400
2401
2402	SizeOfRaidPartition() {
2403	local real_dev smallest_size silly tmp
2404
2405	silly=999999999
2406	smallest_size=$silly
2407
2408	for real_dev in `GetRaidDevMembers $1` ; do
2409	tmp=`SizeOfPartition $real_dev`
2410	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2411	done
2412
2413	if [ "$smallest_size" = "$silly" ] ; then
2414	echo "-1"
2415	return 1
2416	else
2417	echo "$smallest_size"
2418	return 0
2419	fi
2420	}
2421
2422
2423	StripExecutable()
2424	{
2425	local tmpfile
2426
2427	tmpfile=$MINDI_TMP/stripped.$$.dat
2428	[ -d "$1" ] \|\| [ -h "$1" ] && return
2429	cp -f $1 $tmpfile 2>> $LOGFILE
2430	strip $tmpfile 2> /dev/null
2431	if [ $? -eq 0 ] ; then
2432	cp -f $tmpfile $1 2>> $LOGFILE
2433	LogFile "INFO: Stripped binary $2"
2434	fi
2435	rm -f $tmpfile
2436	}
2437
2438	KernelVer() {
2439	local fkern_ver fname
2440
2441	fname=$1
2442	file $fname \| grep -q gzip
2443	if [ $? -eq 0 ] ; then
2444	# Used by ia64
2445	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2446	else
2447	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2448	fi
2449	echo "$fkern_ver"
2450	}
2451
2452
2453	# WARNING: This function should just echo the final result !!!
2454	#
2455	TryToFindKernelPath() {
2456	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2457
2458	we_want_version=$KERVERRUN
2459	possible_kernels=""
2460	duff_kernels=""
2461	output=""
2462
2463	if [ "$ARCH" = "ia64" ] ; then
2464	root="/boot/efi/efi"
2465	else
2466	root="/"
2467	fi
2468	# See if we're booted from a Xen kernel
2469	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2470	if [ -f /proc/xen/capabilities ]; then
2471	# It's a Xen kernel
2472	KERNEL_IS_XEN="yes"
2473	LogFile "INFO: It's a Xen kernel..."
2474	fi
2475
2476	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
2477	[ ! -e "$fname" ] && continue
2478	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2479	fkern_ver=`KernelVer $fname`
2480	[ "$fkern_ver" = "" ] && continue
2481	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
2482	[ -f "$fname" ] \|\| continue
2483	[ -h "$fname" ] && continue
2484	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
2485	file $fname \| grep -q gzip
2486	if [ $? -eq 0 ] ; then
2487	# Used by ia64
2488	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2489	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2490	duff_kernels="$fname $duff_kernels"
2491	else
2492	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2493	possible_kernels="$fname $possible_kernels"
2494	fi
2495	else
2496	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2497	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2498	duff_kernels="$fname $duff_kernels"
2499	else
2500	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2501	possible_kernels="$fname $possible_kernels"
2502	fi
2503	fi
2504	done
2505	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
2506	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
2507	fi
2508	if [ ! "$possible_kernels" ] ; then
2509	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2510	possible_kernels="$duff_kernels"
2511	if [ ! "$possible_kernels" ] ; then
2512	LogAll "INFO: Sorry, no duff kernels either"
2513	else
2514	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2515	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2516	fi
2517	fi
2518	if [ $KERNEL_IS_XEN = "yes" ]; then
2519	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
2520	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2521	fi
2522	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
2523	noof_kernels=`CountItemsIn "$possible_kernels"`
2524	if [ "$noof_kernels" -eq "0" ] ; then
2525	LogAll "Could not find your kernel."
2526	if [ -e "/boot/vmlinuz" ] ; then
2527	LogAll "INFO: Using /boot/vmlinuz as a last resort."
2528	output=/boot/vmlinuz
2529	else
2530	output=""
2531	fi
2532	elif [ "$noof_kernels" -eq "1" ] ; then
2533	kp=`echo "$possible_kernels" \| sed s/' '//`
2534	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2535	output="$kp"
2536	else
2537	for i in $possible_kernels ; do
2538	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
2539	LogAll "INFO: OK, I used my initiative and found that "
2540	LogAll "INFO: $i is probably your kernel. "
2541	output="$i"
2542	break
2543	fi
2544	done
2545	if [ ! -n "$output" ]; then
2546	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2547	output=/boot/vmlinuz
2548	LogFile "INFO: Schlomo, this one's for you."
2549	else
2550	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2551	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2552	LogFile "INFO: $possible_kernels"
2553	output=""
2554	fi
2555	fi
2556	fi
2557	if [ $KERNEL_IS_XEN = "yes" ]; then
2558	if [ "$noof_xenkernels" -eq "0" ]; then
2559	xenkernelpath=""
2560	elif [ "$noof_xenkernels" -eq "1" ]; then
2561	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
2562	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2563	else
2564	for i in $possible_xenkernels ; do
2565	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
2566	LogFile "INFO: OK, I used my initiative and found that "
2567	LogFile "INFO: $i is probably your Xen kernel. "
2568	xenkernelpath="$i"
2569	break
2570	fi
2571	done
2572	if [ ! -n "$xenkernelpath" ]; then
2573	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
2574	if [ ! -n "$new_possible_xenkernels" ]; then
2575	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
2576	LogFile "INFO: Using $xenkernelpath"
2577	else
2578	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2579	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2580	LogFile "INFO: $possible_xenkernels"
2581	output=""
2582	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
2583	LogFile "INFO: Using $xenkernelpath"
2584	fi
2585	fi
2586	fi
2587	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
2588	Die "Cannot find Xen kernel $xenkernelpath, aborting"
2589	fi
2590	fi
2591	#LogAll "TryToFindKernelPath found $output"
2592	echo "$output"
2593	}
2594
2595
2596	MakeBootInitFile() {
2597	local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2598
2599	tgz_dir_fname=$1
2600	rdz_fname=$2
2601	kernelsize=$3
2602	tempfile=$MINDI_TMP/temp.rd
2603	res=0
2604	templog=$MINDI_TMP/$$.log
2605	> $templog
2606
2607	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2608	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2609	LogAll "INFO: Creating ext2 filesystem on $tempfile"
2610	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
2611	mkdir -p $mountpoint
2612	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2613
2614	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2615	for d in bin sbin lib lib64; do
2616	if [ -h "/$d" ]; then
2617	thelink=`readlink /$d`
2618	mkdir -p $mountpoint/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $mountpoint."
2619	mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2620	if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2621	rmdir $mountpoint/$d
2622	fi
2623	if [ ! -h $mountpoint/$d ]; then
2624	rm -f $mountpoint/$d 2> /dev/null
2625	(cd $mountpoint ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2626	fi
2627	fi
2628	done
2629
2630	LogFile "INFO: what is now in $mountpoint"
2631	ls -al $mountpoint >> $LOGFILE
2632
2633	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2634	# copy from rootfs into mountpoint
2635	LogAll "INFO: Copying Mindi files onto $mountpoint"
2636	for f in $tgz_dir_fname/*; do
2637	if [ ! -r $f ]; then
2638	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2639	else
2640	cp -af $f $mountpoint 2>&1 >> $LOGFILE
2641	fi
2642	done
2643	(cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2644	(cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2645
2646	(cd $mountpoint/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2647
2648	for w in insmod.static insmod.static.old ; do
2649	s=`which $w 2> /dev/null`
2650	if [ -e "$s" ] ; then
2651	tar cf - -C / $s 2> /dev/null \| (cd $mountpoint ; tar xf -)
2652	fi
2653	done
2654
2655	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2656
2657	# Copy of files mandatory for ssh to automate mount if sshfs is used
2658	mkdir -p $mountpoint/.ssh $mountpoint/tmp
2659	cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2660	cat > $mountpoint/tmp/myssh << EOF
2661	ssh -o StrictHostKeyChecking=no $*
2662	EOF
2663	chmod 755 $mountpoint/tmp/myssh
2664
2665	# Copy of files mandatory for ld.so
2666	cp -a /etc/ld.so.c* $mountpoint/etc
2667
2668	# Handle the case where busybox and mount are dynamically linked
2669	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
2670	if [ $? -eq 0 ]; then
2671	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
2672	rm -f $mountpoint/bin/mount
2673	fi
2674
2675	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2676	echo -en "INFO: Gathering dependencies of required files..."
2677	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2678	lines=`cat $DEPLIST_DIR/minimal.conf \| grep -vE " #.\|^#" \| sort -u`
2679	noof_lines=`echo $lines \| wc -w`
2680	progress=0
2681	for f in $lines; do
2682	if [ -d $f ]; then
2683	for g in `find $f`; do
2684	echo $g >> $MINDI_TMP/minimal.lis
2685	LocateDeps $g >> $MINDI_TMP/minimal2.lis
2686	done
2687	else
2688	if [ -r $f ]; then
2689	echo $f >> $MINDI_TMP/minimal.lis
2690	LocateDeps $f >> $MINDI_TMP/minimal2.lis
2691	fi
2692	fi
2693	progress=$(($progress+1))
2694	LogProgress $progress $noof_lines
2695	done
2696	echo -e "$DONE"
2697	echo -en "INFO: Processing all dependencies links..."
2698	lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
2699	noof_lines=`echo $lines \| tr ' ' '\n' \| wc -l`
2700	progress=0
2701	for f in $lines; do
2702	mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2703	progress=$(($progress+1))
2704	LogProgress $progress $noof_lines
2705	done
2706	echo -e "$DONE"
2707	# Initial / are trucated by tar
2708	finallist=""
2709	# Remove directories from the list, as tar/cp will create them anyway
2710	# and it may hurt if /lib is in it as on Debian/Ubuntu
2711	# recent bash says that -d is true for a link to a dir !
2712	for f in `sort -u $MINDI_TMP/minimal.lis`; do
2713	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h $f ]; then
2714	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
2715	if [ ! -e "$mountpoint/$f" ]; then
2716	finallist="$finallist $f"
2717	fi
2718	fi
2719	done
2720	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2721
2722	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
2723	LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
2724	cp -a --parents $fnllist -t $mountpoint 2> $templog \|\| LogAll "WARNING: Problem in minimal analysis" $templog
2725
2726	# In case target /bin dir still doesn't exist, create it before using it
2727	if [ ! -d $mountpoint/bin ]; then
2728	mkdir -p $mountpoint/bin
2729	fi
2730
2731	# For older distributions expecting /sbin/init provides it
2732	if [ ! -e "$mountpoint/sbin/init" ]; then
2733	(cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2734	fi
2735
2736	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2737	(cd $mountpoint ; ln -sf /bin/bash bin/sh)
2738	LogFile "INFO: Using bash as default shell"
2739
2740	# Avoids an issue on some distro (RHEL5)
2741	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2742
2743	# Management of udev (which includes modprobe in rules)
2744	ps auxww \| grep -v grep \| grep -qw udevd
2745	if [ $? -eq 0 ]; then
2746	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2747	LogFile "INFO: udev device manager found"
2748	tar cf - -C / /etc/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
2749	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2750	rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2751	# Do not do it if it's a link (Ubuntu 64 bits #503)
2752	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2753	tar cf - -C / /lib64/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2754	fi
2755	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
2756	tar cf - -C / /lib32/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2757	fi
2758	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
2759	tar cf - -C / /lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
2760	fi
2761	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
2762	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2763	fi
2764	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
2765	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2766	lis=""
2767	# Get only the files which exist in that list
2768	# and potentially their symlink structure
2769	for i in $lis2; do
2770	if [ -h $i ]; then
2771	j=$i
2772	while [ -h $j ]; do
2773	lis="$lis $j"
2774	j=`readlink -f $j`
2775	done
2776	lis="$lis $j"
2777	elif [ -d $i ]; then
2778	lis3="$lis3 $i"
2779	elif [ -f $i ]; then
2780	lis="$lis $i"
2781	fi
2782	done
2783	# And their deps
2784	LocateDeps $lis > $MINDI_TMP/udev.lis
2785	for i in $lis; do
2786	if [ "`echo $i \| cut -c1`" = "/" ]; then
2787	j=`echo $i \| cut -c2-`
2788	[ "$j" != "" ] && rm -f $mountpoint/$j
2789	fi
2790	echo "$i" >> $MINDI_TMP/udev.lis
2791	done
2792	finallist=""
2793	# Remove directories from the list, as tar/cp will create them anyway
2794	# and it may hurt if /lib is in it as on Debian/Ubuntu
2795	# recent bash says that -d is true for a link to a dir !
2796	for f in `sort -u $MINDI_TMP/udev.lis`; do
2797	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
2798	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
2799	if [ ! -e "$mountpoint/$f" ]; then
2800	finallist="$finallist $f"
2801	fi
2802	fi
2803	done
2804	# But adds the directory useful for udev in $lis3
2805	fnllist=`echo $finallist \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
2806	LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
2807	cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog \|\| LogAll "WARNING: Problem in udev.lis analysis" $templog
2808	rm -f $MINDI_TMP/udev.lis
2809	else
2810	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2811	LogAll " mindi will use static devices which may cause problems"
2812	rm -f $mountpoint/tmp/USE-UDEV
2813	fi
2814	fi
2815
2816	# Management of potential HW info (ProLiant only at the moment)
2817	rm -rf $MINDI_CACHE/bkphw
2818	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
2819	if [ -d $MINDI_CACHE/bkphw ]; then
2820	LogAll "INFO: Hardware Information found and saved ..."
2821	cp -rp $MINDI_CACHE/bkphw $mountpoint
2822	if [ -f $MINDI_CACHE/tools.files ]; then
2823	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2824	LocateDeps $lis > $MINDI_TMP/tools.lis
2825	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
2826	fi
2827	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2828	mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2829	chmod 755 $mountpoint/mindi-rsthw
2830	fi
2831	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2832	fi
2833
2834	# Management of perl scripts delivered needed at restore time
2835	LogAll "INFO: Analyzing perl modules dependencies..."
2836	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2837	LogFile "DBG4: Perl Modules found:"
2838	LogFile "-------------------------"
2839	cat $MINDI_TMP/perl.lis >> $LOGFILE
2840	LogFile "-------------------------"
2841	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
2842
2843	for w in cdrom groovy-stuff ; do
2844	mkdir -p mnt/$w
2845	done
2846
2847	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
2848
2849	needed_modules=""
2850	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2851
2852	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2853	# For PXE boot
2854	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2855	fi
2856	for i in $DENY_MODS; do
2857	LogFile "INFO: Removing $i from the list of modules to load"
2858	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
2859	done
2860
2861	if [ "${kernelname}" != "" ]; then
2862	needed_modules_path=lib/modules/${kernelname}
2863	mkgmopt="-k ${kernelname}"
2864	else
2865	needed_modules_path=lib/modules/$KERVERRUN
2866	mkgmopt="-k $KERVERRUN"
2867	fi
2868
2869	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
2870	LogAll "INFO: Analyzing kernel modules dependencies..."
2871	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2872
2873	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2874	cp --parents -aL $needed_modules $mountpoint/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
2875
2876	# Uncompress modules if not using udev and native modprobe
2877	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2878	for i in $needed_modules; do
2879	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
2880	gunzip -f $mountpoint/$i
2881	fi
2882	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
2883	bunzip2 -f $mountpoint/$i
2884	fi
2885	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
2886	unxz -f $mountpoint/$i
2887	fi
2888	LogFile "INFO: Uncompressing $i"
2889	done
2890	fi
2891
2892	# Also copy modules.* in case of udev so that normal modprobe works
2893	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$mountpoint" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
2894
2895	# Copy FW in case some drivers needs it
2896	for d in "/lib" "/usr/lib"; do
2897	if [ -d "$d/firmware" -a ! -h $d ]; then
2898	cp -a "$d/firmware" "$mountpoint/$d"
2899	fi
2900	done
2901
2902	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2903	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2904	if [ -d "$d/multipath" -a ! -h $d ]; then
2905	cp -a "$d/multipath" "$mountpoint/$d"
2906	fi
2907	done
2908
2909	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2910	(cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2911
2912	# Copy an additional ProLiant tool for OBDR support
2913	if [ -f $MINDI_TMP/OBDR ]; then
2914	found=0
2915	if [ -x /usr/bin/hpsa_obdr_mode ]; then
2916	mkdir -p $mountpoint/usr/bin
2917	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2918	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2919	found=1
2920	fi
2921	if [ -x /usr/bin/sg_wr_mode ]; then
2922	mkdir -p $mountpoint/usr/bin
2923	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2924	LocateDeps $lis > $MINDI_TMP/obdr.lis
2925	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $mountpoint ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
2926	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2927	found=1
2928	fi
2929	if [ $found -eq 0 ]; then
2930	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2931	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
2932	fi
2933	fi
2934
2935	if [ ! -e "/sbin/devfsd" ]; then
2936	LogFile "INFO: Deleting devfsd daemon from ramdisk"
2937	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
2938	rm -f $mountpoint/sbin/devfsd
2939	fi
2940	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2941	if [ _"$MONDO_SHARE" != _"" ]; then
2942	MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2943	cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
2944	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
2945	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2946	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2947	fi
2948
2949	# Create module list to load at restore time
2950	rm -f $mountpoint/tmp/modules
2951	for m in $CDROM_MODS; do
2952	echo $m >> $mountpoint/tmp/modules
2953	done
2954
2955	mkdir -p $mountpoint/proc
2956	LogFile "---------------------------"
2957	LogFile "Size of initial ramdisk:"
2958	LogFile "---------------------------"
2959	(cd "$mountpoint" ; du -sh .) >> $LOGFILE
2960	LogFile "---------------------------"
2961	LogFile "Content of initial ramdisk:"
2962	LogFile "---------------------------"
2963	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2964	LogFile "---------------------------"
2965
2966	# Determine what filesystem to use for initrd image
2967	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2968	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2969	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2970	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
2971	# say what will be used
2972	LogFile "INFO: Creating an $gvFileSystem initrd image..."
2973	# kernel expects linuxrc in ext2 filesystem
2974	(cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2975	# unmount loop filesystem and create image file using the standard approach
2976	sync
2977	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2978	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2979	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2980	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
2981	else
2982	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
2983	fi
2984	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2985	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2986	rm -f ${rdz_fname}.tmp
2987	# log that we are done
2988	elif [ "$gvFileSystem" = "initramfs" ]; then
2989	# say what will be used
2990	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2991	# make sure that cpio is there
2992	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
2993	# kernel expects init in cpio filesystem
2994	(cd "$mountpoint" ; ln -sf usr/sbin/init init)
2995	# create cpio image file and unmount loop filesystem
2996	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
2997	sync
2998	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2999	# log that we are done
3000	else
3001	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
3002	fi
3003
3004	if [ "$res" -eq "0" ] ; then
3005	LogAll "INFO: MakeBootInitFile finished without error."
3006	else
3007	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
3008	fi
3009	return 0
3010	}
3011
3012
3013	##############################################################################
3014	#----------------------------------- Main -----------------------------------#
3015	##############################################################################
3016
3017	# Now we can create what we need
3018	mkdir -p $MINDI_TMP
3019
3020	# --nolog needs to be first, and is used in analyze-my-lvm
3021	if [ "$1" = "--nolog" ] ; then
3022	shift
3023	LOGFILE=/dev/stderr
3024	else
3025	> $LOGFILE
3026	fi
3027	if [ "$1" = "--printvar" ] ; then
3028	shift
3029	if [ _"$1" != _"" ] ; then
3030	set \| grep -Ew "^$1" \| cut -d= -f2
3031	fi
3032	exit 0
3033	fi
3034
3035	LogFile "mindi v$MINDI_VERSION"
3036	LogFile "-----------------------------"
3037	LogFile "Start date : `date`"
3038	LogFile "-----------------------------"
3039	LogFile "$ARCH architecture detected"
3040	LogFile "mindi called with the following arguments:"
3041	echo "$@">> $LOGFILE
3042	LogFile "-----------------------------"
3043	LogFile "pbdistrocheck results:"
3044	pbdistrocheck >> $LOGFILE
3045	LogFile "-----------------------------"
3046
3047	# Log some capital variables
3048	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3049	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3050	LogFile "MONDO_SHARE = $MONDO_SHARE"
3051	LogFile "MINDI_LIB = $MINDI_LIB"
3052	LogFile "MINDI_SBIN = $MINDI_SBIN"
3053	LogFile "MINDI_CONF = $MINDI_CONF"
3054	# Purge from potential old run
3055	if [ _"$MINDI_CACHE" = _"" ]; then
3056	Die "MINDI_CACHE undefined"
3057	else
3058	LogFile "MINDI_CACHE = $MINDI_CACHE"
3059	fi
3060
3061	if [ -f $MINDI_CONFIG ]; then
3062	LogFile "-----------------------------"
3063	LogFile " Mindi configuration file "
3064	LogFile "-----------------------------"
3065	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3066	LogFile "-----------------------------"
3067	fi
3068	LogFile "In Mindi"
3069	LogFile "--------"
3070	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3071	LogFile "--------"
3072
3073	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3074
3075	# Sanity checks
3076	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
3077	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
3078	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3079	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
3080	if which awk &> /dev/null ; then
3081	if ! which gawk &> /dev/null ; then
3082	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3083	fi
3084	fi
3085	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
3086	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3087
3088	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3089
3090	# Update the PATH variable if incomplete
3091	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3092	PATH=$PATH:/sbin:/usr/sbin
3093	export PATH
3094	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3095	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3096	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3097	fi
3098
3099	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3100	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3101	fi
3102
3103	### TODO
3104	### Fix as it's not mandatory on ia64
3105	if [ "$ARCH" = "ia64" ] ; then
3106	if which elilo &> /dev/null ; then
3107	LILO_EXE=elilo
3108	else
3109	LILO_EXE=`which false 2> /dev/null`
3110	fi
3111	else
3112	FindIsolinuxBinary
3113	fi
3114	trap "Aborted" SIGTERM
3115	DONE="\r\t\t\t\t\t\t\t\tDone. "
3116	kernelpath=""
3117	MONDO_ROOT=/var/cache/mondo
3118	mkdir -p $MONDO_ROOT
3119
3120	if [ -d "/proc/lvm" ]; then
3121	# LVM v1
3122	LVMCMD=""
3123	LVM="v1"
3124	elif [ -d "/dev/mapper" ]; then
3125	# LVM v2
3126	LVMCMD="lvm"
3127	LVM="v2"
3128	else
3129	LVM="false"
3130	fi
3131
3132	if [ -e "/proc/cmdline" ]; then
3133	CMDLINE="/proc/cmdline"
3134	elif [ -e "/tmp/cmdline" ]; then
3135	CMDLINE="/tmp/cmdline"
3136	else
3137	CMDLINE="/dev/null"
3138	fi
3139
3140	LogFile "INFO: LVM set to $LVM"
3141	LogFile "----------"
3142	LogFile "mount result:"
3143	LogFile "-------------"
3144	mount >> $LOGFILE
3145	if [ -e "/etc/raidtab" ]; then
3146	LogFile "-------------"
3147	LogFile "/etc/raidtab content:"
3148	LogFile "-------------"
3149	cat /etc/raidtab >> $LOGFILE
3150	else
3151	LogFile "No file /etc/raidtab"
3152	fi
3153	if [ -e "/etc/mdadm.conf" ]; then
3154	LogFile "-------------"
3155	LogFile "/etc/mdadm.conf content:"
3156	LogFile "-------------"
3157	cat /etc/mdadm.conf >> $LOGFILE
3158	else
3159	LogFile "-------------"
3160	LogFile "No file /etc/mdadm.conf"
3161	fi
3162	LogFile "-------------"
3163	LogFile "cat $CMDLINE"
3164	LogFile "-------------"
3165	cat $CMDLINE >> $LOGFILE
3166	LogFile "-------------"
3167	LogFile "cat /proc/swaps:"
3168	LogFile "-------------"
3169	cat /proc/swaps >> $LOGFILE
3170	LogFile "-------------"
3171	if [ -e "/proc/mdstat" ]; then
3172	LogFile "cat /proc/mdstat:"
3173	LogFile "-------------"
3174	cat /proc/mdstat >> $LOGFILE
3175	else
3176	LogFile "No pseudo file /proc/mdstat"
3177	fi
3178	LogFile "-------------"
3179	LogFile "cat /proc/partitions:"
3180	LogFile "-------------"
3181	cat /proc/partitions >> $LOGFILE
3182	LogFile "-------------"
3183	LogFile "cat /proc/filesystems:"
3184	LogFile "-------------"
3185	cat /proc/filesystems >> $LOGFILE
3186	LogFile "-------------"
3187	LogFile "lsmod result:"
3188	LogFile "-------------"
3189	lsmod >> $LOGFILE
3190	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
3191	if [ -x /usr/sbin/esxcfg-module ]; then
3192	LogFile "-------------"
3193	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3194	LogFile "-------------"
3195	LogFile "VMWare modules"
3196	LogFile "-------------"
3197	/usr/sbin/esxcfg-module -l >> $LOGFILE
3198	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
3199	fi
3200	LogFile "-------------"
3201	LogFile "FORCE_MODS:"
3202	LogFile "-------------"
3203	LogFile "$FORCE_MODS"
3204	LogFile "-------------"
3205	LogFile "DENY_MODS:"
3206	LogFile "-------------"
3207	LogFile "$DENY_MODS"
3208	LogFile "-------------"
3209	LogFile "df result:"
3210	LogFile "----------"
3211	df -aT >> $LOGFILE
3212	LogFile "-------------"
3213	LogFile "df -i result:"
3214	LogFile "----------"
3215	df -i >> $LOGFILE
3216	LogFile "-------------"
3217	if [ -r /boot/grub/menu.lst ]; then
3218	LogFile "-------------"
3219	LogFile "INFO: /boot/grub/menu.lst content"
3220	LogFile "-------------"
3221	cat /boot/grub/menu.lst >> $LOGFILE
3222	LogFile "-------------"
3223	fi
3224	if [ -r /boot/grub/grub.conf ]; then
3225	LogFile "-------------"
3226	LogFile "INFO: /boot/grub/grub.conf content"
3227	LogFile "-------------"
3228	cat /boot/grub/grub.conf >> $LOGFILE
3229	LogFile "-------------"
3230	fi
3231	if [ -r /boot/grub/grub.cfg ]; then
3232	LogFile "-------------"
3233	LogFile "INFO: /boot/grub/grub.cfg content"
3234	LogFile "-------------"
3235	cat /boot/grub/grub.cfg >> $LOGFILE
3236	LogFile "-------------"
3237	fi
3238	if [ -r /boot/grub/device.map ]; then
3239	LogFile "-------------"
3240	LogFile "INFO: /boot/grub/device.map content"
3241	LogFile "-------------"
3242	cat /boot/grub/device.map >> $LOGFILE
3243	LogFile "-------------"
3244	fi
3245	if [ -r /etc/lilo.conf ]; then
3246	LogFile "-------------"
3247	LogFile "INFO: /etc/lilo.conf content"
3248	LogFile "-------------"
3249	cat /etc/lilo.conf >> $LOGFILE
3250	fi
3251	if [ -d /boot/efi ]; then
3252	gcf=`find /boot/efi -name 'grub.c*'`
3253	if [ _"$gcf" = _"" ]; then
3254	LogFile "Found a /boot/efi directory without a grub config file in it"
3255	else
3256	LogFile "-------------"
3257	LogFile "INFO: $gcf content"
3258	LogFile "-------------"
3259	cat $gcf >> $LOGFILE
3260	LogFile "-------------"
3261	fi
3262	fi
3263
3264	LogFile "Full fdisk info"
3265	LogFile "---------------"
3266	$FDISK -l >> $LOGFILE
3267	LogFile "----------------"
3268
3269	# Compute libata version
3270	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
3271	# If libata v2 is used then remove ide-generic as it will perturbate boot
3272	if [ "`echo $MODULES \| grep libata`" ]; then
3273	if [ "$laver" = "2" ]; then
3274	DENY_MODS="$DENY_MODS ide-generic"
3275	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3276	LogFile "-------------"
3277	fi
3278	fi
3279
3280	# Check for McAfee which disturbs the access to some files (tgz in articular)
3281	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3282	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3283	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3284	LogFile "WARNING: You have two options:"
3285	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
3286	LogFile "WARNING: - Disable the scanner during the backup"
3287	fi
3288
3289	#
3290	# If we have a USB device we need to store info
3291	# and remove it from the parameters line
3292	#
3293	if [ "$#" -ne "0" ] ; then
3294	if [ "$1" = "--usb" ] ; then
3295	shift
3296	USBDEVICE=$1
3297	if [ _"$USBDEVICE" = _"" ]; then
3298	Die "No USB device specified"
3299	fi
3300	shift
3301	fi
3302	fi
3303
3304	if [ "$#" -ne "0" ] ; then
3305	if [ "$1" = "--findkernel" ] ; then
3306	resk=`TryToFindKernelPath`
3307	# Avoids logfile content for mondo
3308	export MONDO_SHARE=""
3309	if [ "$resk" = "" ] ; then
3310	if [ $KERNEL_IS_XEN = "yes" ]; then
3311	echo "$xenkernelpath"
3312	LogFile "INFO: xenkernelpath = $xenkernelpath"
3313	MindiExit 0
3314	else
3315	MindiExit -1
3316	fi
3317	else
3318	echo "$resk"
3319	LogFile "INFO: kernelpath = $resk"
3320	MindiExit 0
3321	fi
3322	elif [ "$1" = "--locatedeps" ] ; then
3323	[ ! "$2" ] && Die "Please specify the binary to look at"
3324	LocateDeps $*
3325	# Avoids logfile content for mondo
3326	export MONDO_SHARE=""
3327	MindiExit $?
3328	elif [ "$1" = "--readalllink" ] ; then
3329	[ ! "$2" ] && Die "Please specify the binary to look at"
3330	# Avoids logfile content for mondo
3331	export MONDO_SHARE=""
3332	mr-read-all-link $2
3333	MindiExit $?
3334	elif [ "$1" = "--makebcf" ] ; then
3335	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3336	MakeBootConfFile $2
3337	MindiExit 0
3338	elif [ "$1" = "--makemessage" ] ; then
3339	MakeMessageFile \| cut -c1-80
3340	MindiExit 0
3341	elif [ "$1" = "--makemountlist" ] ; then
3342	[ ! "$2" ] && Die "Please specify the output file"
3343	MakeMountlist $2
3344	CheckMountlist $2
3345	# Avoids logfile content for mondo
3346	export MONDO_SHARE=""
3347	MindiExit $?
3348	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
3349	echo "Mindi v$MINDI_VERSION"
3350	# Avoids logfile content for mondo
3351	export MONDO_SHARE=""
3352	MindiExit 0
3353	elif [ "$1" = "--ironic" ] ; then
3354	[ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
3355	[ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
3356	[ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
3357	#TODO: See how we can influence the boot loader
3358	[ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
3359	if [ "$5" ]; then
3360	boottype=$5
3361	fi
3362	[ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
3363	if [ "$6" ]; then
3364	bootbin=$6
3365	fi
3366	kernelpath=$2
3367	BOOT_TYPE=$4
3368	bigdir=$MINDI_TMP/bigdir
3369	PrepareBootDir
3370	PrepareAllTar
3371	cp $3 $MINDI_TMP/initrd.img
3372	MakeBootableDevice ISO
3373	MindiExit 0
3374	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3375	MONDO_TMP=$2
3376	# Change MINDI_TMP for the one provided by mondo
3377	# So that it can get back the built files
3378	if [ _"$MONDO_TMP" = _"" ]; then
3379	Die "MONDO_TMP is empty, aborting"
3380	fi
3381	if [ _"$MONDO_TMP" = _"/" ]; then
3382	Die "MONDO_TMP is /, aborting"
3383	fi
3384	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3385	rmdir $MINDI_TMP
3386	export MINDI_TMP=$MONDO_TMP
3387	mkdir -p $MINDI_TMP
3388
3389	# This is the scratch dir in mondo - subdir images
3390	MINDI_CACHE=$3
3391	LogFile "MINDI_CACHE = $MINDI_CACHE"
3392
3393	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3394	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3395
3396	###
3397	### Sq-Modification...
3398	### Attempt to locate kernel specific module path
3399	### if module path is found then use it other wise use uname -r to set it...
3400	###
3401	if [ $KERNEL_IS_XEN = "yes" ]; then
3402	LogAll "INFO: xenkernelpath = $xenkernelpath"
3403	fi
3404	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
3405	if [ ! -d "/lib/modules/$kernelname" ]; then
3406	LogAll "WARNING: Module path for ${kernelpath} not found..."
3407	LogAll " using running kernel\'s modules."
3408	kernelname=$KERVERRUN
3409	else
3410	LogAll "INFO: Using modules for kernel: ${kernelname}"
3411	fi
3412	LogAll "INFO: kernelname = $kernelname"
3413	LogAll "INFO: kernelpath = $kernelpath"
3414	###
3415	### end of Sq-Modification
3416	###
3417	TAPEDEV=$5
3418	TAPESIZE=$6
3419	FILES_IN_FILELIST=$7
3420	USE_LZO=$8
3421	CDRECOVERY=$9
3422	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
3423	IMAGE_DEVS=""
3424	else
3425	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
3426	fi
3427	if [ "${11}" ] ; then
3428	LILO_OPTIONS=""
3429	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3430	fi
3431	LAST_FILELIST_NUMBER=${12}
3432	ESTIMATED_TOTAL_NOOF_SLICES=${13}
3433	export MINDI_EXCLUDE_DEVS="${14}"
3434	USE_COMP="${15}"
3435	USE_LILO="${16}"
3436	USE_STAR="${17}"
3437	INTERNAL_TAPE_BLOCK_SIZE="${18}"
3438	DIFFERENTIAL="${19}"
3439	USE_GZIP="${20}"
3440	USE_LZMA="${21}"
3441	NOT_BOOT="${22}"
3442	BOOT_TYPE="${23}"
3443	[ "$USE_COMP" = "" ] && USE_COMP=yes
3444	[ "$USE_GZIP" = "" ] && USE_GZIP=no
3445	[ "$USE_LZMA" = "" ] && USE_LZMA=no
3446	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3447	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3448	# MONDO_ROOT is the real scratchdir
3449	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
3450	if [ _"$MONDO_ROOT" != _"" ]; then
3451	mkdir -p $MONDO_ROOT
3452	else
3453	Die "MONDO_ROOT is undefined"
3454	fi
3455	else
3456	LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
3457	LogScreen " mindi --ironic kernel initrd [BIOS\|UEFI] [syslinux\|grub\|grub2] [/path/to/bootloader]"
3458	LogScreen " mindi --locatedeps file"
3459	LogScreen " mindi --makemessage"
3460	LogScreen " mindi --findkernel"
3461	LogScreen " mindi --makemountlist file"
3462	LogScreen " mindi --makebcf bootloader"
3463	LogScreen " mindi -V"
3464	MindiExit -1
3465	fi
3466	fi
3467
3468	if [ _"$MINDI_CACHE" != _"" ]; then
3469	rm -rf $MINDI_CACHE/* 2> /dev/null
3470	mkdir -p $MINDI_CACHE
3471	fi
3472
3473	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
3474
3475	if [ _"$MONDO_SHARE" = _"" ]; then
3476	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3477	LogAll "Latest Mindi is available from http://www.mondorescue.org"
3478	LogAll "BusyBox sources are available from http://www.busybox.net"
3479	LogAll "------------------------------------------------------------------------------"
3480	else
3481	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3482	fi
3483	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3484	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
3485	else
3486	LogAll "ERROR: Unable to find mindi-busybox, please install it"
3487	MindiExit -1
3488	fi
3489
3490	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3491	modinfo $i 2> /dev/null 1> /dev/null
3492	if [ $? -eq 0 ]; then
3493	modprobe $i 2>&1 > /dev/null
3494	fi
3495	done
3496
3497	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3498	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3499	LogFile "NOT_BOOT = '$NOT_BOOT'"
3500	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3501	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3502	MakeMondoConfigFile $MINDI_TMP/$MRCFG
3503	MakeMountlist $MINDI_TMP/mountlist.txt
3504	CheckMountlist $MINDI_TMP/mountlist.txt
3505	mkdir -p $MINDI_TMP/small-all/tmp
3506	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
3507	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3508	sleep 2
3509	LogAll "Done. Exiting."
3510	MindiExit 0
3511	fi
3512
3513	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3514	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3515	fi
3516
3517	if [ "$kernelpath" = "" ] ; then
3518	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3519	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3520	read ch
3521	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3522	USE_OWN_KERNEL="yes"
3523	else
3524	USE_OWN_KERNEL="no"
3525	fi
3526	if [ "$USE_OWN_KERNEL" = "yes" ]; then
3527	kernelpath=`TryToFindKernelPath`
3528	if [ "$kernelpath" = "" ] ; then
3529	echo -n "Please enter kernel path : "
3530	read kernelpath
3531	fi
3532	fi
3533	fi
3534
3535	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3536	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3537
3538	mountpoint=$MINDI_TMP/mountpoint.$$
3539	PrepareDataDiskImages
3540
3541	MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not create initrd.img"
3542
3543	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3544	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3545
3546	if [ _"$MONDO_SHARE" = _"" ]; then
3547	OfferToMakeBootableISO
3548	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3549	OfferToMakeBootableUSB
3550	fi
3551	LogAll "INFO: Mindi Finished"
3552	elif [ "$TAPEDEV" ] ; then
3553	if [ "$ARCH" != "ia64" ] ; then
3554	# We need to keep the img file as boot file for ia64 platform
3555	rm -f $MINDI_CACHE/{img,iso}
3556	else
3557	rm -f $MINDI_CACHE/*iso
3558	fi
3559	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3560	OfferToMakeBootableUSB
3561	fi
3562	OfferToMakeBootableISO
3563	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3564	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3565	else
3566	Die "Cannot find all.tar.gz, to be written to tape"
3567	fi
3568	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3569	OfferToMakeBootableUSB
3570	else
3571	OfferToMakeBootableISO
3572	fi
3573
3574	if [ -f $MINDI_TMP/$MRCFG ]; then
3575	LogFile "INFO: Your $MRCFG file is:"
3576	LogFile "--------------------------"
3577	cat $MINDI_TMP/$MRCFG >> $LOGFILE
3578	LogFile "--------------------------"
3579	else
3580	if [ _"$MONDO_SHARE" != _"" ] ; then
3581	LogAll "ERROR: You don't have a $MRCFG file !"
3582	fi
3583	fi
3584	# cleanup
3585	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: