Context Navigation

source: MondoRescue/branches/3.3/mindi/mindi@ 3753

Visit:

Last change on this file since 3753 was 3753, checked in by Bruno Cornec, 4 years ago
Remove floppy support
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 132.1 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3753 2019-11-30 00:45:07Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3692]	46	EXTRA_SPACE=20000 # increase if you run out of ramdisk space - Default 20 MB
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[2629]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3693]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3753]	71	IDE_MODS="ide ide-floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3713]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd xhci-pci usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial cdc_eem"
[3714]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb i40e dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3607]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3596]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
	136	fi
[3403]	137
[3746]	138	# Find MBR file in case of bootable USB device to build and for restoring it
	139	MBRFILE=/usr/lib/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	143	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
	144
	145	# Find GPTMBR in case of bootable USB device to build and for restoring it
	146	GPTMBRFILE=/usr/lib/syslinux/gptmbr.bin
	147	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/lib64/syslinux/gptmbr.bin
	148	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/share/syslinux/gptmbr.bin
	149	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/share/lib/syslinux/gptmbr.bin
	150	[ ! -r "$GPTMBRFILE" ] && GPTMBRFILE=/usr/share/lib64/syslinux/gptmbr.bin
	151
[2880]	152	# Function to log on screen only
	153	LogScreen() {
[3368]	154	if [ -e /dev/stderr ] ; then
	155	echo -e "$1" >> /dev/stderr
	156	elif [ -e /usr/bin/logger ] ; then
	157	/usr/bin/logger -s $1
	158	fi
[2880]	159	}
[2685]	160
[2880]	161	# Function to log in log file only
	162	LogFile() {
	163
[3368]	164	echo -e "$1" >> $LOGFILE
	165	if [ _"$2" != _"" ]; then
[3403]	166	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	167	rm -f "$2"
[3368]	168	fi
[2880]	169	}
	170
	171	# Function to log in both screen and logfile
	172	LogAll() {
[3368]	173	LogScreen "$1"
	174	LogFile "$1" "$2"
[2880]	175	}
	176
[2963]	177	# Last function called before exiting
	178	# Parameter is exit code value
	179	# Should be declared here as used immediately below potentialy
	180	MindiExit() {
[3522]	181	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	182	LogFile "INFO: End date : `date`"
[2963]	183	if [ _"$MONDO_SHARE" != _"" ] ; then
	184	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	185	if [ -f $LOGFILE ]; then
	186	cat $LOGFILE >> /var/log/mondoarchive.log
	187	else
	188	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	189	fi
[2963]	190	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	191	fi
[2880]	192
[2963]	193	cd /
	194	sync&
	195
	196	# Clean temporary files only when standalone mindi
	197	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	198	rm -Rf $MINDI_TMP
	199	fi
	200	exit $1
	201	}
	202
[2685]	203	Die() {
	204	if [ "$1" = "" ] ; then
[3149]	205	LogAll "FATAL ERROR"
[2685]	206	else
[3149]	207	LogAll "FATAL ERROR. $1"
[2685]	208	fi
	209	if [ _"$2" != _"" ]; then
[3403]	210	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	211	fi
	212	rm -f "$2"
	213
[3149]	214	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	215	LogAll "See http://www.mondorescue.org for more information."
	216	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	217	MindiExit -1
	218	}
	219
[1485]	220	# Now we can create what we need
[2150]	221	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	222	if [ $? -ne 0 ]; then
	223	df $TMPDIR
	224	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	225	fi
[2153]	226	if [ _"$MINDI_TMP" = _"" ]; then
	227	Die "MINDI_TMP is empty, aborting"
	228	fi
	229	if [ _"$MINDI_TMP" = _"/" ]; then
	230	Die "MINDI_TMP is /, aborting"
	231	fi
[2150]	232	export MINDI_TMP
[940]	233
[747]	234	# ----------------------------------------------------------------------------
	235
	236
	237	AbortHere() {
	238	Die "Program is terminating in response to signal received from OS/user"
	239	}
	240
	241
	242	Aborted() {
	243	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	244	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	245	Die "User abort."
	246	}
	247
	248
	249	AddFileToCfgIfExists() {
	250	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	251	}
	252
	253
	254	AddKeyboardMappingFile() {
	255	local mappath r included_list included_item i res ii sss
	256	mappath=$1
	257	KBDEPTH=$(($KBDEPTH+1))
	258	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	259	if [ -e "$bigdir/$mappath" ] ; then
[3149]	260	LogFile "INFO: $mappath already added"
[747]	261	return
	262	elif [ -d "$bigdir/$mappath" ] ; then
	263	echo "Cannot add $mappath: it's a directory. Sorry."
	264	return
	265	fi
[3149]	266	LogFile "INFO: Added kbd map $mappath"
[747]	267	if [ ! -e "$mappath" ] ; then
[3149]	268	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	269	if [ ! -e "$mappath" ] ; then
[3149]	270	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	271	return
	272	fi
	273	fi
	274
[3149]	275	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	276	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	277	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	278	else
[3023]	279	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	280	fi
	281	for included_item in $included_list ; do
[925]	282	if [ ! -e "$included_item" ] ; then
[3149]	283	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	284	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	285	for ii in $sss ; do
[3546]	286	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	287	done
	288	else
	289	AddKeyboardMappingFile $included_item
	290	fi
[747]	291	done
	292	}
	293
	294
	295	CopyDependenciesToDirectory() {
[3403]	296	local outdir incoming counter d found tdir templog
[747]	297	outdir=$1
[3403]	298	templog=$MINDI_TMP/$$.log
[747]	299	mkdir -p $outdir
	300	incoming=`ReadLine`
[3522]	301	counter=$3
[3403]	302	> $templog
	303
[747]	304	while [ "$incoming" != "" ] ; do
[3522]	305	if [ "$3" = "1" ]; then
	306	counter=$(($counter+1))
	307	LogProgress $counter $2
	308	fi
[1526]	309	# Non absolute file names should not arrive till here => skipped
	310	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	311	LogAll "WARNING: Unable to handle $incoming"
[1526]	312	incoming=`ReadLine`
	313	continue
	314	fi
	315	# no parent directory of incoming should be a link, copy is not possible in that case
	316	d=`dirname "$incoming"`
	317	found="false"
	318	while [ $d != "/" -a $found = "false" ]; do
	319	[ -h "$d" ] && found="true"
	320	d=`dirname "$d"`
	321	done
[3166]	322	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]	323	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	324	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	325	if [ ! -h "$incoming" ]; then
[3405]	326	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	327	else
	328	tdir=`dirname "$incoming"`
	329	if [ ! -e "$outdir/$tdir" ]; then
	330	mkdir -p "$outdir/$tdir"
	331	fi
	332	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	333	fi
[1989]	334	# Only uncompress modules if not using udevd
	335	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	336	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	337	fi
[3075]	338	[ -x "$outdir" ] && StripExecutable $outdir
[747]	339	fi
	340	incoming=`ReadLine`
	341	done
	342	}
	343
	344
	345	CountItemsIn() {
	346	local r
	347	r=0
	348	for q in $1 ; do
	349	r=$(($r+1))
	350	done
	351	echo $r
	352	}
	353
	354
	355	DropOptimizedLibraries() {
	356	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	357	filelist=$1
	358	outdir=$2
	359
	360	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	361	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	362	return 0
[747]	363	fi
	364	echo -en "Dropping i686-optimized libraries if appropriate"
	365	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	366	echo -en "."
	367	reason=""
[1483]	368	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	369	echo "$vanilla_lib_name" >> $filelist
[2963]	370	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	371	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	372	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	373
	374	# This may return multiple files
[3231]	375	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	376	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	377	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	378	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	379	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	380	rmdir $outdir$resolved > /dev/null 2> /dev/null
	381	ln -sf $vanilla_resolved_name $outdir$resolved
	382	LogFile "INFO: Excluding deps $resolved"
	383	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	384	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	385	echo "$vanilla_resolved_name" >> $filelist.tmp
	386	mv -f $filelist.tmp $filelist
	387	fi
[2168]	388	done
[747]	389	done
[925]	390	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	391	mv -f $filelist.tmp $filelist
	392	echo -e "$DONE"
	393	}
	394
	395
	396	FindAndAddUserKeyboardMappingFile() {
	397	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	398	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	399	KEYDIR=/usr/lib/kbd
[747]	400	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[3347]	401	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	402	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	403	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	404	if [ ! -e "$KEYDIR" ] ; then
[3149]	405	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	406	return 0
[3569]	407	else
	408	LogFile "INFO: KEYDIR=$KEYDIR"
[747]	409	fi
	410	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	411	LogFile "INFO: Red Hat-style config detected."
[747]	412	keyfile=/etc/sysconfig/keyboard
[3257]	413	elif [ -e "/etc/vconsole.conf" ] ; then
	414	LogFile "INFO: New Fedora style config detected."
	415	keyfile=/etc/vconsole.conf
[747]	416	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	417	LogFile "INFO: Slackware-style config detected."
[747]	418	keyfile=/etc/rc.d/rc.keymap
	419	elif [ -e "/etc/rc.config" ] ; then
[2963]	420	LogFile "INFO: Debian-style config detected."
[747]	421	keyfile=/etc/rc.config
	422	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	423	LogFile "INFO: Debian-style config detected."
[747]	424	mkdir -p $bigdir/tmp
[3278]	425	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	426	KBDEPTH=0
	427	mkdir -p $bigdir/etc/console
[963]	428	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	429	echo ""
[747]	430	echo -e "$DONE"
	431	return 0
[2828]	432	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	433	LogFile "INFO: Ubuntu-style config detected."
[1713]	434	mkdir -p $bigdir/tmp
[2828]	435	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	436	kbdfile="/etc/console-setup/boottime.kmap.gz"
	437	else
	438	kbdfile="/etc/console-setup/cached.kmap.gz"
	439	fi
[3278]	440	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	441	KBDEPTH=0
	442	mkdir -p $bigdir/etc/console-setup
[2828]	443	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	444	echo ""
[1713]	445	echo -e "$DONE"
	446	return 0
[3595]	447	elif [ -e "/etc/default/keyboard" ]; then
	448	LogFile "INFO: New Debian-style config detected."
	449	keyfile=/etc/default/keyboard
[2744]	450	elif [ -e "/etc/rc.conf" ] ; then
[2963]	451	LogFile "INFO: ArchLinux config detected."
[2744]	452	keyfile=/etc/rc.conf
[1465]	453	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	454	LogFile "INFO: Gentoo-style config detected."
[1465]	455	keyfile=/etc/conf.d/keymaps
[3191]	456	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	457	LogFile "INFO: X11-style config detected."
	458	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	459	else
[3149]	460	LogFile "Searching for rc.config ..."
[747]	461	keyfile=`find /etc -name rc.config \| head -n1`
	462	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	463	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	464	return
	465	else
[2963]	466	LogFile "INFO: Found $keyfile"
[747]	467	fi
	468	fi
	469	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	470	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	471	return
	472	fi
[2963]	473	LogFile "INFO: keyfile=$keyfile"
[2999]	474	# For SLES we need to remove the .map.gz extension Cf #614
	475	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	476	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3595]	477	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	478	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[3595]	479	[ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" \| grep -v '^#' \| cut -d= -f2 \| tr -d '"'` # New Debian 8+
[2963]	480	LogFile "INFO: locale=$locale"
[1764]	481	#
	482	# Process the keymaps dir once for all
	483	# AddKeyboardMappingFile will use it recursively
	484	#
	485	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	486	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	487	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[3571]	488	# For new distro such as RHEL 7 we need that additional search
	489	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
[747]	490	# If we have multiple keymaps then log it !!
[3149]	491	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	492	if [ $? -eq 0 ]; then
[2963]	493	LogAll "WARNING: Multiple keymaps found: $mp"
	494	LogFile "INFO: The following one will be used"
[747]	495	fi
	496	for i in $mp ; do
	497	mappath=$i
	498	[ -e "$i" ] && [ ! -d "$i" ] && break
	499	done
	500	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3688]	501	mappath=$(find /usr /lib /lib64 -path "/kbd/keymaps//$locale \| head -1")
[747]	502	fi
[2963]	503	LogFile "INFO: mappath = $mappath"
[747]	504	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	505	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	506	return
	507	fi
[3535]	508	echo -en "INFO: Adding keyboard mapping tables"
[747]	509	mkdir -p $bigdir/tmp
[3278]	510	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	511	KBDEPTH=0
[747]	512	AddKeyboardMappingFile $mappath
	513	echo -e "$DONE"
[1764]	514	rm -f $MINDI_TMP/keymaps.find
[747]	515	return 0
	516	}
	517
	518
[3241]	519	FindLdlinux32Binary() {
	520	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	521	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	522	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	523	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	524	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	525	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	526	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	527	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	528	if [ ! -e "$LDLINUXC32" ]; then
	529	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
[3725]	530	LDLINUXC32=/tmp/itdoesntexist
[3241]	531	else
	532	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	533	fi
	534	}
	535
	536
[2629]	537	FindMboot32Binary() {
	538	MBOOTC32=/usr/lib/syslinux/mboot.c32
	539	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	540	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	541	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	542	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	543	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	544	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	545	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	546	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	547	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	548	}
	549
[3476]	550	FindLdlinuxe64Binary() {
	551	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	552	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	553	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	554	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	555	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	556	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	557	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	558	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	559	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	560	}
	561
	562	FindSyslinux64EFI() {
	563	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	564	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	565	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	566	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	567	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	568	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	569	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	570	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	571	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	572	}
	573
[747]	574	FindIsolinuxBinary() {
	575	ISOLINUX=/usr/lib/isolinux.bin
	576	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	577	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	578	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	579	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	580	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	581	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	582	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	583	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	584	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	585	}
	586
	587
	588	GenerateGiantDependencyList() {
[3522]	589	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	590
[3522]	591	echo -en "INFO: Analyzing dependency requirements"
[747]	592	outfile=$1
[940]	593	tempfile=$MINDI_TMP/$$.txt
[747]	594	incoming=`ReadLine`
	595
	596	> $tempfile
	597	progress=0
	598	res=0
	599	noof_lines=$2
	600	while [ "$incoming" != "" ] ; do
[861]	601	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	602	incoming=`ReadLine`
	603	continue
	604	fi
	605	if [ "$incoming" = "LVMFILES:" ] ; then
	606	break
	607	fi
[747]	608	filelist=`GenerateListForFile "$incoming"`
	609	r=$?
[3149]	610	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	611	res=$(($res+$r))
[2963]	612	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	613	for fname in $filelist ; do
[3321]	614	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	615	done
	616	progress=$(($progress+1))
[3149]	617	LogProgress $progress $noof_lines
[747]	618	incoming=`ReadLine`
	619	done
[861]	620	if [ "$incoming" = "LVMFILES:" ] ; then
	621	incoming=`ReadLine`
	622	lvmversion=""
	623	while [ "$incoming" != "" ] ; do
	624	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	625	incoming=`ReadLine`
	626	continue
	627	fi
	628	filelist=`GenerateListForFile "$incoming"`
	629	for tool in $filelist ; do
[3662]	630	lvmresolved=`readlink -f $tool`
	631	if [ "$tool" = "$lvmresolved" ]; then
	632	echo "$tool" >> $tempfile
	633	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	634	if [ "$lvmversion" = "" ] ; then
	635	lvmversion=`$lvmresolved`
	636	echo "$lvmresolved" >> $tempfile
	637	fi
	638	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
	639	if [ "$lvmversion" = "200" ]; then
	640	# pvdata and lvmcreate_initrd don't exist in LVM2
	641	case "$toolstripped" in
	642	"pvdata")
[861]	643	continue
	644	;;
[3662]	645	"lvmcreate_initrd")
[861]	646	continue
	647	;;
	648	esac
[3662]	649	fi
	650	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	651	if [ -e "$toolpath" ] ; then
[861]	652	echo "$toolpath" >> $tempfile
	653	echo "$tool" >> $tempfile
[3662]	654	else
[861]	655	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
[3662]	656	fi
	657	if [ -e "$toolpath" ] ; then
	658	echo "$toolpath" >> $tempfile
	659	echo "$tool" >> $tempfile
[861]	660	else
[3662]	661	echo "Where are your LVM-Tools? Couldn't find $tool"
	662	fi
	663	else
[861]	664	echo "$tool" >> $tempfile
	665	fi
	666	done
	667	progress=$(($progress+1))
[3149]	668	LogProgress $progress $noof_lines
[861]	669	incoming=`ReadLine`
	670	done
[747]	671	fi
[3661]	672	echo -e "$DONE"
[747]	673
[3661]	674	echo -en "INFO: Making complete dependency list..."
[747]	675	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	676	mv -f $tempfile.new $tempfile
	677	> $outfile.pre
	678	progress=0
	679	noof_lines=`cat $tempfile \| wc -l`
[2963]	680	LogFile "---------------------------------"
	681	LogFile "List of dependencies: "
	682	LogFile "---------------------------------"
[747]	683	for fname in `cat $tempfile` ; do
[1876]	684	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	685	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	686	progress=$(($progress+1))
[3149]	687	LogProgress $progress $noof_lines
[747]	688	done
[1684]	689	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	690	mkdir -p $bigdir/tmp
[3172]	691	mkdir -p $bigdir/usr/bin
[940]	692	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	693	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	694	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	695	fi
[963]	696	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[3661]	697	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
[925]	698	else
[3565]	699	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	700	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[3661]	701	LogAll " If Mindi was called by Mondo then send a bug report."
[3565]	702	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	703	LogAll " Finally, run Mindi again."
[3661]	704	Die "Odd."
[925]	705	fi
[3565]	706	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	707	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	708	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	709	for r in NETFS-* ; do
[963]	710	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	711	LogFile "INFO: Copying $r to ramdisk"
[925]	712	done
	713	fi
[747]	714	fi
[925]	715	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	716	rm -f $tempfile $outfile.pre
[3661]	717	[ "$res" -eq "0" ] && echo -e "$DONE" \|\| echo "\nFailed."
[747]	718	return $res
	719	}
	720
	721
	722	GenerateListForFile() {
[3692]	723	local files_found fname incoming
[747]	724	incoming="$1"
	725	files_found=""
	726
	727	for fname in $incoming ; do
	728	files_found="$files_found `LocateFile $fname`"
	729	done
	730
	731	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	732	}
	733
	734
	735	# Returns all disk devices which are part of a raid array
	736	GetAllRaidMembers() {
	737	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	738	}
	739
	740
	741	GetFileSizeList() {
	742	local i
	743	for i in `find $1 -type d -o -print` ; do
	744	du -sk $i
	745	done
	746	}
	747
	748
[1230]	749	# Check kernel filesystem capabilites for accessing initrd image
[2429]	750	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	751	#
	752	# Interface definition:
	753	# param #1: absolute path to kernel image
	754	GetInitrdFilesystemToUse() {
	755
	756	# interface test: make sure we have one parameter
	757	if [ $# -ne 1 ]; then
	758	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	759	fi
	760
	761	# interface parameters
	762	local lvKernelImage=$1
	763
	764	# local constants (filesystem magic strings)
	765	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	766	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	767	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	768	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	769
	770	# local variables
	771	local lvOffset
	772	local lvScanRes
	773	local lvUseFilesystem
	774
	775	# say where we are.
[3111]	776	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	777
	778	# verify that file exists
	779	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	780
[3111]	781	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	782	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	783	if [ $? -eq 0 ]; then
[3111]	784	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	785	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	786	else
	787	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	788	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	789	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	790	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	791	if [ $lvOffset -eq 0 ]; then
	792	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	793	lvScanRes=$lcMagicInitfs
[2393]	794	else
[3111]	795	lvOffset=`expr $lvOffset / 2`
	796	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	797	# scan again kernel image
	798	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	799	fi
[3111]	800	fi
[2393]	801
[3111]	802	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	803	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	804	lvUseFilesystem="ext2fs"
	805	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	806	lvUseFilesystem="ext3fs"
	807	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	808	lvUseFilesystem="initramfs"
	809	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	810	lvUseFilesystem="cramfs"
[2429]	811	else
[3111]	812	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	813	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	814	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	815	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	816	lvUseFilesystem="initramfs"
	817	fi
[3111]	818
[1230]	819	# say what we are using
[3111]	820	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	821
	822	# return file system to use
	823	echo "$lvUseFilesystem"
	824
	825	}
	826
[747]	827	# Searches members of raid device
	828	# $1: raid device (/dev/md...)
	829	GetRaidDevMembers() {
[2917]	830	if [ ! -f /etc/raidtab ]; then
	831	return
	832	fi
[747]	833	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	834	}
	835
	836
	837	ListAllPartitions() {
[3702]	838	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}' \| sort -u
[747]	839	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	840	if [ -e "/vmfs/volumes" ]; then
	841	# For VMWare ESX 3 get the device names of these volumes
[2431]	842	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	843	fi
[747]	844	return
	845	}
	846
	847
	848	ListKernelModulePaths() {
[2583]	849	local module_list module fname r kern
[1399]	850	module_list="$MODULES"
[1230]	851	# Remove unwanted modules from list
	852	for i in $DENY_MODS; do
	853	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	854	done
[747]	855	###
	856	### Sq-Modification ... Use kernelname for module search path if specified
	857	###
[3231]	858	if [ "${kernelname}" != "" ]
[747]	859	then
	860	kern=${kernelname}
	861	else
[2292]	862	kern="$KERVERRUN"
[747]	863	fi
[2292]	864	export KERVER=$kern
[747]	865	###
	866	### Sq-Mod End
	867	###
[3310]	868	# Get rid of duplicates
	869	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	870	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	871	if [ -z "$r" ]; then
	872	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	873	r="[live module file not found]"
	874	else
	875	r="[extra module file not found]"
	876	fi
[2583]	877	else
	878	[ -f "$r" ] && echo "$r"
[2471]	879	fi
[2963]	880	LogFile "INFO: module $module --> $r"
[747]	881	done
	882	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	883	}
	884
[1784]	885	#
	886	# Critical function which computes all dependencies (dyn. lib.)
	887	# for a list of binaries
	888	#
[747]	889	LocateDeps() {
	890	local incoming fname deps
[1724]	891	incoming="$*"
[3231]	892	deps=""
	893
[747]	894	for fname in $incoming ; do
	895	if [ ! -e "$fname" ] ; then
[3661]	896	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	897	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	898	LogFile " This warning only affects you if you are using LVM."
[1399]	899	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	900	LogFile " I think you are, so please take heed!"
[747]	901	else
[3231]	902	LogFile " I don't think you are, so don't worry about it."
[747]	903	fi
	904	fi
	905	else
[3231]	906	deps="$deps $fname"
[747]	907	fi
	908	done
[3692]	909	mr-read-all-link `mr-process-ldd $deps \| sort -u` $deps \| sort -u
[747]	910	}
	911
[925]	912
[747]	913	LocateFile() {
[3692]	914	local j dn newdn bn path fname_to_find output
[747]	915	fname_to_find="$1"
[1526]	916	# It's an absolute path
[3231]	917	j=`echo "$fname_to_find" \| cut -c1`
	918	if [ _"$j" = _"/" ]; then
	919	dn=`dirname $fname_to_find`
	920	# We suppose that the link is already included, just add the new file
	921	if [ -h "$dn" ]; then
	922	newdn=`readlink -f $dn`
	923	bn=`basename $fname_to_find`
	924	output="$newdn/$bn"
	925	else
	926	output="$fname_to_find"
	927	fi
[860]	928	if [ -h "$output" ] ; then
[3231]	929	output="`mr-read-all-link $output` $output"
[860]	930	fi
[859]	931	echo "$output"
	932	return 0
[747]	933	fi
[1526]	934	# It's not an absolute path
[747]	935	output=""
[1526]	936	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	937	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	938	[ -h "$path" ] && continue
	939	[ ! -e "$path/$fname_to_find" ] && continue
	940	output="$path/$fname_to_find $output"
	941	if [ -h "$path/$fname_to_find" ] ; then
[3231]	942	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	943	fi
[747]	944	done
	945	if [ "$output" = "" ] ; then
[860]	946	return 1
[747]	947	fi
	948	echo "$output"
	949	return 0
	950	}
	951
[3149]	952	LogProgress() {
[3293]	953	local i progress modres noof_lines title
[3149]	954
	955	progress=$1
	956	noof_lines=$2
[3293]	957	title=$3
[747]	958
[3149]	959	i=$(($progress*100))
	960	if [ $noof_lines -ne 0 ]; then
	961	i=$(($i/$noof_lines))
	962	else
	963	i=0
	964	fi
[3293]	965
	966	if [ _"$MONDO_SHARE" != _"" ]; then
	967	echo "$title $i%"
	968	else
	969	echo -en "\r\t\t\t\t\t\t\t\t"
	970	echo -en "$i"
	971	echo -en "%"
	972	modres=$(($progress%4))
	973	[ "$modres" -eq "0" ] && echo -en "\t/"
	974	[ "$modres" -eq "1" ] && echo -en "\t-"
	975	[ "$modres" -eq "2" ] && echo -en "\t\\"
	976	[ "$modres" -eq "3" ] && echo -en "\t\|"
	977	fi
[3149]	978	}
	979
[3692]	980	# Called by PrepareTargetDir, to make /tmp/$MRCFG
[747]	981	MakeMondoConfigFile() {
[3692]	982	local outfile use_lzo use_comp use_star use_gzip use_lzma
[747]	983	outfile=$1
	984	> $outfile
	985	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	986	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	987	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	988	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	989	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	990	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	991	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	992	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	993	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	994	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	995	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	996	echo "use-lzo $use_lzo" >> $outfile
[998]	997	echo "use-gzip $use_gzip" >> $outfile
[747]	998	echo "use-star $use_star" >> $outfile
[3149]	999	echo "use-lzma $use_lzma" >> $outfile
[747]	1000	echo "use-comp $use_comp" >> $outfile
[3397]	1001	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	1002	echo "datestamp `date`" >> $outfile
	1003	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	1004	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	1005	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	1006	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	1007	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	1008	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1009	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1010	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1011	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1012	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1013	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1014	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1015	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1016	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1017
[3270]	1018	# Deal with network configuration in a portable way
	1019	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1020	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
[3705]	1021	if [ $? -ne 0 ]; then
	1022	Die "mr-net-get-config didn't execute correctly. Check dependencies, probably the perl Net::IPv4Addr module is missing"
	1023	fi
[3270]	1024	fi
[747]	1025	}
	1026
[2618]	1027	# Get PV's for an LV
	1028	GetPVsForLV() {
[3692]	1029	local vg
	1030
[3368]	1031	if [ -n "$1" ]; then
	1032	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1033	if [ -z "$vg" ]; then
	1034	return
	1035	fi
	1036	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1037	fi
[2618]	1038	}
[747]	1039
[2618]	1040
[747]	1041	MakeMountlist() {
[2907]	1042	local mountlist all_partitions current_partition \
[747]	1043	partition_size partition_format outstring partition_number \
	1044	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1045	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1046
[3149]	1047	LogFile "------------------------------------"
[3522]	1048	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1049	LogFile "------------------------------------"
[747]	1050	cat $MY_FSTAB >> $LOGFILE
[3149]	1051	LogAll "-----------------------------------"
[3522]	1052	LogAll "INFO: Your mountlist will look like this:"
[3149]	1053	LogAll "-----------------------------------"
[747]	1054
[2907]	1055	# mountlist(OUT)
[747]	1056	mountlist=$1
	1057
	1058	# NB: partition = device
	1059	# NB: mountpt = where the device is mounted
	1060
	1061	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1062
[3565]	1063	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1064	> $mountlist
	1065	all_partitions=""
	1066
	1067	if [ $LVM != "false" ]; then
[3499]	1068	LogFile "INFO: Analyzing LVM..."
[968]	1069	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1070	if [ $? -ne 0 ]; then
[963]	1071	LVM="false"
	1072	fi
[2536]	1073	# Excluded LVs and GVs are not reported here
[2424]	1074	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1075	fi
	1076	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1077	for i in $IMAGE_DEVS ; do
	1078	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1079	done
	1080	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1081	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1082	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1083	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1084	for c_p in $all_partitions ; do
[3702]	1085	# Skip fd/cd devices, network FS, cifs, brtfs subvols
[2452]	1086	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1087	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1088	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1089	current_partition=`readlink -f $c_p`
[3046]	1090	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1091	current_partition="$c_p"
	1092	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1093	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1094	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1095	fi
[747]	1096	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1097	else
	1098	current_partition="$c_p"
	1099	fi
	1100	[ "$c_p" = "none" ] && continue
[3702]	1101
[747]	1102	redhat_label=""
[1831]	1103	label=""
[957]	1104	uuid=""
[861]	1105	absolute_partition=`readlink -f $c_p`
[2965]	1106	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1107
[1986]	1108	# set default in case we dont't find it
	1109	str_to_find_fmt_with=$current_partition
	1110
[747]	1111	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1112	# current_partition contains only first column of /etc/fstab
[2965]	1113	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1114	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1115	actual_dev=""
[853]	1116
	1117	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1118	if [ -x "/sbin/findfs" ]; then
[2847]	1119	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1120	fi
[747]	1121
[853]	1122	# 2nd try : blkid, the good way for all LABEL except swap
	1123	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1124	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1125	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1126	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1127	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1128	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1129	for dev in `ls /dev/mapper/*`; do
[963]	1130	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1131	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1132	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1133	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1134	break
	1135	fi
	1136	done
	1137	fi
	1138	fi
	1139
[853]	1140	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1141	# For LVM gives a /dev/mapper entry
	1142	if [ "x$actual_dev" = "x" ]; then
[2965]	1143	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1144	fi
	1145
[853]	1146	# 4th try, with vol_id
[747]	1147	# SWAP only
	1148	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1149	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1150	for dev_swap in $list_swaps ; do
[2965]	1151	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1152	if [ "x$dev_exists" != "x" ]; then
	1153	actual_dev=$dev_swap
	1154	break;
	1155	fi
	1156	done
	1157	fi
	1158
[853]	1159	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1160	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1161	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1162	# SWAP only
[2965]	1163	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1164	skip=""
[2292]	1165	uname=$KERVERRUN
[2013]	1166	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1167	# 2.6.12 needs 16 (FC3)
	1168	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1169	# 2.6.19 and upper needs 1052
	1170	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1171	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1172	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1173	if [ $skip = "" ]; then
	1174	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1175	fi
[853]	1176	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1177	do
	1178	# Location of the swap label for kernel 2.6
[2013]	1179	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1180	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1181	actual_dev=$try_dev
[853]	1182	fi
	1183	done
[747]	1184	fi
[1008]	1185
	1186	# Check if one of all those tries has known success
	1187	if [ "x$actual_dev" != "x" ]; then
	1188	current_partition=$actual_dev
	1189	else
[1885]	1190	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1191	fi
[957]	1192	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1193	# current_partition contains only first column of /etc/fstab
[2965]	1194	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1195	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1196	actual_dev=""
	1197
	1198	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1199	if [ -x "/sbin/findfs" ]; then
	1200	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1201	fi
	1202
[1531]	1203	# 2nd try : blkid, the good way for all UUID except swap
[957]	1204	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1205	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1206	# For LVM FS it will give a /dev/dm-# which should then be converted
	1207	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1208	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1209	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1210	for dev in `ls /dev/mapper/*`; do
[963]	1211	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1212	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1213	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1214	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1215	break
	1216	fi
	1217	done
	1218	fi
	1219	fi
	1220
	1221	# 3th try, with vol_id
	1222	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1223	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1224	for dev in $list_dev ; do
[2965]	1225	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1226	if [ "x$dev_exists" != "x" ]; then
	1227	actual_dev=$dev
	1228	break;
	1229	fi
	1230	done
	1231	fi
	1232
[1531]	1233	# 4th try, with dumpuuid (VMWare only ?) for swap
	1234	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1235	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1236	for dev in $list_dev ; do
[2965]	1237	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1238	if [ "x$dev_exists" != "x" ]; then
	1239	actual_dev=$dev
	1240	break;
	1241	fi
	1242	done
	1243	fi
	1244
[747]	1245	# Check if one of all those tries has known success
	1246	if [ "x$actual_dev" != "x" ]; then
	1247	current_partition=$actual_dev
	1248	else
[2069]	1249	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1250	fi
	1251	else
[1863]	1252	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1253	# they use symlinks in fstab unrelated to what is shown in mount !
	1254	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1255	# set default in case we dont't find it
[2965]	1256	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1257	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1258	str_to_find_fmt_with=$tmpp
[2965]	1259	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1260	break;
[1863]	1261	fi
	1262	done
	1263	fi
[747]	1264	fi
	1265
[3702]	1266	# Avoid analyzing btrfs subvol partitions
	1267	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| grep -v 'subvol=' \| head -n1`
[3084]	1268	# Detects noauto partitions not mounted and exclude them
	1269	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
[3702]	1270	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
[3084]	1271	continue
	1272	fi
	1273	# Detects bind partitions and exclude them
	1274	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
[3702]	1275	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
[3084]	1276	continue
	1277	fi
	1278
[2566]	1279	# Look for devices which have to be excluded
	1280	skip=0
	1281	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1282	l=""
[3231]	1283	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1284	for d in $list_of_devices; do
[2579]	1285	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1286	done
[2618]	1287
	1288	# Remove PVs from LVs excluded
	1289	l="$l `GetPVsForLV $current_partition`"
	1290
	1291	# We want a single unique list
[3522]	1292	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1293
[2854]	1294	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1295	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1296	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1297	skip=1
	1298	continue
	1299	fi
	1300	done
	1301	fi
	1302	if [ $skip -eq 1 ]; then
	1303	continue
	1304	fi
	1305
[3702]	1306	# sort in case of btrfs subvol
	1307	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB \| sort -u`
[3028]	1308	# Detects iso9660 ISO images and exclude them
	1309	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1310	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1311	continue
	1312	fi
[747]	1313	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1314	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1315	# the former is then a link to the latter, so we test whether
	1316	# $current_partition is actually such a link or not and set
[755]	1317	# $current_lvolume accordingly. On Debian you may find more than one answer
	1318	# so we remove the one corresponding to /dev/.static
	1319	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1320	# principle is the same and we need to find the link to it as well.
	1321	# Note that $current_lvolume may well be an
[747]	1322	# ordinary device. It is just to make sure that we feed the right value
	1323	# into any of the LVM tools if possible.
	1324
[3064]	1325	current_lvolume="$current_partition"
[763]	1326	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1327	# .static dir are a Debian specificity
[763]	1328	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1329	echo $current_lvolume \| grep -q ' '
[784]	1330	if [ $? -eq 0 ]; then
[2963]	1331	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1332	fi
[2072]	1333	# if it's not found, it may well be a real device such as a multipath one
	1334	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1335	if [ _"$current_lvolume" = _"" ]; then
	1336	current_lvolume="$current_partition"
	1337	fi
[747]	1338	fi
	1339	#
	1340	# End of LVM device style variation code (other than $current_lvolume).
	1341
[745]	1342	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1343	# Size computed via LVM not directly
[747]	1344	partition_size="lvm"
	1345	else
	1346	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1347	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1348	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1349	# Skip swap files
	1350	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1351	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1352	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1353	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1354	if [ "$partition_size" = "" ] ; then
[3368]	1355	totalsize=0
	1356	items=0
	1357	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1358	totalsize=$(($totalsize+$i))
	1359	items=$(($items+1))
[3368]	1360	done
	1361	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1362	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1363	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1364	fi
[2947]	1365	else
	1366	partition_size=`SizeOfPartition $current_partition`
[747]	1367	fi
	1368	fi
	1369	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1370	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1371	if [ "$partition_mountpt" = "" ] ; then
	1372	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1373	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1374	partition_mountpt="raid"
	1375	partition_format="raid"
	1376	else
	1377	partition_mountpt="lvm"
	1378	partition_format="lvm"
	1379	fi
	1380	fi
	1381	fi
	1382	psz=$partition_size
[2963]	1383	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1384	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1385	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1386	partition_mountpt="image"
	1387	old_partition_fmt=$partition_format
	1388	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1389	partition_size=$(($partition_size+1)); # just in case
	1390	if [ "$partition_format" = "Linux" ] ; then
[2963]	1391	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1392	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1393	partition_format=$old_partition_fmt
	1394	fi
	1395	fi
[2566]	1396
[747]	1397	if [ ! "$partition_mountpt" ] ; then
[2963]	1398	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1399	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1400	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1401	[ "$partition_format" ] && break
	1402	done
[2963]	1403	LogFile "------- $FDISK log end ------------"
[747]	1404	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1405	partition_format="compaq"
	1406	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1407	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1408	continue
	1409	fi
	1410	fi
[1755]	1411	if [ "$redhat_label" ]; then
	1412	label="$redhat_label"
[1756]	1413	elif [ "$uuid" ]; then
[1755]	1414	label="$uuid"
	1415	fi
[3330]	1416
	1417	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1418	# in order to mount the root part e.g. in grub.
	1419	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1420	# restored correctly
	1421	if [ _"$label" = _"" ]; then
	1422	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1423	fi
	1424
[747]	1425	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1426	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1427	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1428	if [ "$current_partition" = "" ] ; then
[2963]	1429	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1430	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1431	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1432	partition_mountpt=raid
	1433	partition_format=raid
[3149]	1434	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1435	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1436	else
[2963]	1437	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1438	fi
	1439	elif [ "$partition_format" = "" ] ; then
[2963]	1440	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1441	elif [ "$partition_size" = "" ] ; then
[2963]	1442	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1443	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1444	continue
	1445	else
	1446	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1447	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1448	partition_format="vfat"
	1449	fi
[3149]	1450	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1451	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1452	fi
	1453	done
[3149]	1454	LogAll "-----------------------------------"
[3730]	1455
[3744]	1456	# Manages potential btrfs subvol partitions so they can be restored
	1457	grep -qE 'btrfs[ ]+subvol=' $MY_FSTAB
	1458	if [ $? -eq 0 ]; then
	1459	# List looks like this
	1460	# ID 257 gen 20074 top level 5 path <FS_TREE>/@
	1461	# ID 260 gen 19927 top level 257 path @/home
	1462	# ID 261 gen 19927 top level 257 path @/opt
	1463	touch $MINDI_TMP/create-btrfs-subvol $MINDI_TMP/mount-btrfs-subvol $MINDI_TMP/umount-btrfs-subvol
	1464	btrfs subvolume list -a / 2>/dev/null > $MINDI_TMP/btrfssubvol.txt
	1465	LogFile "btrfs subvolumes layout is:"
	1466	LogFile "---------------------------"
	1467	cat $MINDI_TMP/btrfssubvol.txt >> $LOGFILE
	1468	LogFile "---------------------------"
	1469	grep -E 'btrfs[ ]+subvol=' $MY_FSTAB > $MINDI_TMP/btrfs-extract
	1470	LogFile "btrfs subvolumes referenced in fstab:"
	1471	LogFile "-------------------------------------"
	1472	cat $MINDI_TMP/btrfs-extract >> $LOGFILE
	1473	LogFile "-------------------------------------"
	1474	# We suppose there is only one FS
	1475	sep=`btrfs subvolume list -a / \| grep FS_TREE \| sed 's/.<FS_TREE>\/\(.\)/\1/'`
	1476	echo "btrfs subvolume create /mnt/RESTORING/$sep" >> $MINDI_TMP/create-btrfs-subvol
	1477	while read dev mp type opt dum dum; do
	1478	echo $dev \| grep -qE 'UUID\|LABEL'
	1479	if [ $? -eq 0 ]; then
	1480	label=`echo $dev \| cut -d= -f2`
	1481	device=`grep $label $mountlist \| awk '{print $1}'`
	1482	else
	1483	device=$dev
	1484	fi
	1485	subvol=`echo $opt \| awk -F$sep '{ print $2 }' \| cut -d, -f1`
	1486	#top=`grep -E "@$subvol$" $MINDI_TMP/btrfssubvol.txt \| awk '{ print $7 }'`
	1487	#btrfs=`grep -E "^ID $top " $MINDI_TMP/btrfssubvol.txt \| awk '{ print $9 }' \| sed 's/<FS_TREE>//' \| sed 's/@$//'`
	1488	mountpoint="/mnt/RESTORING/$sep$subvol"
	1489	# If the intermediate dirs of subvol are not a subvolume, we need to create them as dir
	1490	parent=`dirname $subvol`
	1491	grep -qE "$sep$parent$" $MINDI_TMP/btrfssubvol.txt
	1492	if [ $? -ne 0 ]; then
	1493	echo "mkdir -p /mnt/RESTORING/$sep$parent" >> $MINDI_TMP/create-btrfs-subvol
	1494	fi
	1495	echo "btrfs subvolume create $mountpoint" >> $MINDI_TMP/create-btrfs-subvol
	1496	echo "mount -t btrfs -o subvol=$sep$subvol $device $mountpoint" >> $MINDI_TMP/mount-btrfs-subvol
	1497	echo "umount $mountpoint" >> $MINDI_TMP/umount-btrfs-subvol
	1498	done < $MINDI_TMP/btrfs-extract
	1499	rm -f $MINDI_TMP/btrfs-extract
	1500	chmod 755 $MINDI_TMP/create-btrfs-subvol $MINDI_TMP/mount-btrfs-subvol $MINDI_TMP/umount-btrfs-subvol
	1501	LogFile "Your create-btrfs-subvol file content is:"
	1502	LogFile "-----------------------------------------"
	1503	cat $MINDI_TMP/create-btrfs-subvol >> $LOGFILE
	1504	LogFile "-----------------------------------------"
	1505	LogFile "Your mount-btrfs-subvol file content is:"
	1506	LogFile "-----------------------------------------"
	1507	cat $MINDI_TMP/mount-btrfs-subvol >> $LOGFILE
	1508	LogFile "-----------------------------------------"
	1509	LogFile "Your umount-btrfs-subvol file content is:"
	1510	LogFile "-----------------------------------------"
	1511	cat $MINDI_TMP/umount-btrfs-subvol >> $LOGFILE
	1512	LogFile "-----------------------------------------"
	1513	fi
[747]	1514	}
	1515
[2432]	1516	CheckMountlist() {
	1517	local file=$1
	1518	# Coherency verification
[2529]	1519	ML01=`cat $file \| wc -l`
[2995]	1520	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1521	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1522	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1523	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1524	LogFile "--------------------------------------------"
[3081]	1525	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1526	LogFile "--------------------------------------------"
[2432]	1527	fi
[2529]	1528	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1529	LogFile "--------------------------------------------"
	1530	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1531	LogFile "------------------------------------------------"
[2432]	1532	fi
	1533	}
[747]	1534
[3476]	1535
[3522]	1536	MakeISOErrors() {
[3421]	1537
[3522]	1538	LogFile "----------- $ISO_CMD's errors --------------"
[3596]	1539	LogAll "Command invoked: $CMD ."
[3522]	1540	LogAll "$ISO_CMD returned the following errors:"
	1541	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1542	LogAll "ERROR: Failed to create ISO image."
	1543	}
[3499]	1544
[3532]	1545	MakeISO() {
	1546
[3596]	1547	LogAll "INFO: Generating ISO image."
[3608]	1548	LOCISO=`echo $CMD \| perl -p -e 's\|.* -o (.+)/mindi.iso .*\|$1\|'`
[3532]	1549	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1550	if [ $? -ne 0 ] ; then
[3596]	1551	# In case of UEFI handle differences in option handling
[3532]	1552	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1553	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1554	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
[3596]	1555	if [ $? -ne 0 ] ; then
	1556	# xorriso e.g.
	1557	CMD=`echo $CMD \| perl -p -e 's\|-eltorito-platform 0xEF \|\|'`
	1558	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1559	if [ $? -eq 0 ] ; then
	1560	LogAll "INFO: Invoking $CMD ."
[3608]	1561	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3596]	1562	else
	1563	MakeISOErrors
[3599]	1564	fi
[3596]	1565	else
	1566	LogAll "INFO: Invoking $CMD ."
[3608]	1567	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1568	fi
	1569	else
	1570	MakeISOErrors
	1571	fi
	1572	else
[3596]	1573	LogAll "INFO: Invoking $CMD ."
[3608]	1574	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1575	fi
	1576	rm -f $MINDI_TMP/mkisofs.log
	1577	}
	1578
[3522]	1579	MakeBootableDevice() {
[3499]	1580
[3522]	1581	local target tbc retval part size mount_opt
	1582
	1583	target="$1"
	1584
	1585	rm -Rf $MINDI_TMP/target
	1586	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1587
	1588	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1589	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1590	for i in memdisk memtest.bin memtest.img ; do
	1591	j=$MINDI_LIB/$i
	1592	k=$MINDI_TMP/target
	1593	if [ -e "$j" ] ; then
	1594	LogAll "INFO: Copying $j to $k"
	1595	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1596	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
	1597	if [ _"$MONDO_SHARE" != _"" ]; then
	1598	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1599	fi
[3522]	1600	fi
	1601	done
[3499]	1602
[3522]	1603	retval=0
	1604	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1605	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1606	if [ $? -ne 0 ] ; then
[3522]	1607	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1608	retval=$(($retval+1))
	1609	fi
	1610	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1611	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1612	if [ $? -ne 0 ] ; then
[3522]	1613	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1614	retval=$(($retval+1))
	1615	fi
[3421]	1616
[3692]	1617	# copy boot stuff now generated in PrepareBigDir
[3522]	1618	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1619	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1620	tbc="EFI"
[3528]	1621	# Also prepare a BIOS compatible boot
	1622	if [ "$target" = "ISO" ]; then
	1623	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1624	fi
[3522]	1625	else
	1626	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1627	tbc="syslinux"
	1628	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1629	LogFile "----------- syslinux's conf --------------"
	1630	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1631	LogFile "------------------------------------------"
	1632	fi
	1633	if [ "$target" = "ISO" ]; then
	1634	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1635	if [ $? -ne 0 ] ; then
[3522]	1636	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1637	retval=$(($retval+1))
[3476]	1638	fi
[3522]	1639	fi
	1640	fi
[3476]	1641
[3522]	1642	if [ "$ARCH" != "ia64" ] ; then
	1643	if [ $KERNEL_IS_XEN = "yes" ]; then
	1644	FindMboot32Binary
	1645	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]	1646	if [ $? -ne 0 ] ; then
[3522]	1647	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1648	retval=$(($retval+1))
[1885]	1649	fi
[3522]	1650	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
[3528]	1651	if [ $? -ne 0 ] ; then
[3522]	1652	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1653	retval=$(($retval+1))
	1654	fi
[747]	1655	fi
[3522]	1656	fi
[3499]	1657
[3522]	1658	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1659
	1660	if [ _"$MONDO_SHARE" != _"" ]; then
	1661	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1662	if [ $? -ne 0 ] ; then
[3522]	1663	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1664	LogAll " Please check the target directory."
	1665	retval=$(($retval+1))
	1666	fi
	1667	if [ $KERNEL_IS_XEN = "yes" ]; then
	1668	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1669	if [ $? -ne 0 ] ; then
[3522]	1670	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1671	LogAll " Please check the target directory."
	1672	retval=$(($retval+1))
[3476]	1673	fi
[747]	1674	fi
[3522]	1675	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1676	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1677	if [ $? -ne 0 ] ; then
[3527]	1678	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1679	LogAll " Please check the target directory."
	1680	retval=$(($retval+1))
	1681	fi
	1682	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1683	if [ $? -ne 0 ] ; then
[3527]	1684	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1685	LogAll " Please check the target directory."
	1686	retval=$(($retval+1))
	1687	fi
[3522]	1688	fi
[747]	1689
[3522]	1690	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1691	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1692	fi
[747]	1693
[3522]	1694	LogFile "----------- target dir content -----------"
	1695	LogFile "------------------------------------------"
	1696	ls -lR $MINDI_TMP/target >> $LOGFILE
	1697	LogFile "------------------------------------------"
	1698	LogFile "----------- target dir sizes -------------"
	1699	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1700	LogFile "------------------------------------------"
[3476]	1701
[3522]	1702	if [ "$retval" -ne "0" ] ; then
[3546]	1703	sync
[3522]	1704	umount $MINDI_TMP/target
	1705	LogAll "ERROR: Problems while creating boot media."
	1706	LogAll " Please unload some of your modules and try again."
[3692]	1707	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1708	fi
[3476]	1709
[3522]	1710	mkdir -p $MINDI_TMP/mpt
[1684]	1711
[3522]	1712	if [ "$target" = "USB" ]; then
	1713	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1714	LogAll "INFO: Checking $USBDEVICE"
[2924]	1715	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1716	if [ $? -ne 0 ]; then
[2963]	1717	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1718	LogAll " Make sure your USB device is plugged in"
[2963]	1719	MindiExit -1
[1684]	1720	fi
[3149]	1721	# Some distro do auto mount at that point (Ubuntu)
[3522]	1722	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1723	sync
[1721]	1724	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1725	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1726	# If your key has no MBR it may cause an issue
	1727	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1728	if [ -r $MBRFILE ]; then
	1729	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1730	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1731	else
	1732	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1733	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1734	fi
[2855]	1735	fi
[3522]	1736	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1737	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1738	d
	1739	d
	1740	d
	1741	d
[1684]	1742	n
	1743	p
	1744	1
	1745
	1746
	1747	t
	1748	b
	1749	a
	1750	1
	1751	w
	1752	EOF
[2851]	1753	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1754	if [ $? -ne 0 ]; then
[2963]	1755	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1756	LogAll " Make sure your USB device is plugged in"
[1684]	1757	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1758	MindiExit -1
	1759	fi
[2963]	1760	LogFile "fdisk build file"
	1761	LogFile "----------------"
[2851]	1762	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1763	LogFile "----------------"
[2924]	1764	rm -f $MINDI_TMP/fdisk.txt
[3522]	1765	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1766	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1767	# Calling kpartx in case devices were not created
[3033]	1768	if [ -x "/sbin/kpartx" ]; then
[3027]	1769	/sbin/kpartx -a $USBDEVICE
	1770	fi
[2461]	1771	# Some distro do auto mount at that point (Ubuntu)
[3522]	1772	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1773	sync
[2461]	1774	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1775	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1776	if [ "`which dmsetup`" != "" ]; then
[3368]	1777	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1778	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1779	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1780	sleep 1
	1781	dmsetup remove $block_id
	1782	fi
	1783	fi
[3522]	1784	part=$USBPART
	1785	mount_opt=""
	1786	else
	1787	# ISO image
	1788	part=$MINDI_TMP/mindi-bootroot.img
	1789	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1790	# Adds 10 MB to allow for additional space
	1791	size=$(($size+10000))
	1792	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1793	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1794	mount_opt="-o loop"
	1795	fi
	1796
	1797	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1798
	1799	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1800	if [ $? -ne 0 ]; then
	1801	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1802	if [ "$target" = "USB" ]; then
	1803	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1804	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1805	fi
[3522]	1806	MindiExit -1
	1807	fi
[3532]	1808	if [ "$target" = "ISO" ]; then
	1809	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1810	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1811	# and run after the formating for versions > 6 it seems
	1812	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1813	fi
	1814	fi
[3522]	1815	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1816	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1817	if [ $? -ne 0 ]; then
	1818	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1819	if [ "$target" = "USB" ]; then
	1820	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1821	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1822	fi
[3522]	1823	MindiExit -1
	1824	fi
	1825
	1826	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1827	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1828	if [ $? -ne 0 ] ; then
[3522]	1829	LogFile "--------------------------------"
	1830	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1831	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1832	LogFile "--------------------------------"
[3546]	1833	sync
[3522]	1834	umount $MINDI_TMP/mpt
	1835	LogAll "ERROR: Problems while creating boot media."
	1836	LogAll " Please unload some of your modules and try again."
[3692]	1837	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1838	fi
	1839
	1840	if [ "$target" = "ISO" ]; then
[3534]	1841	if [ "$ARCH" != "ia64" ]; then
	1842	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1843	fi
[3522]	1844	# ISO
[3533]	1845	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]	1846	CMD="$ISO_CMD $ISO_OPT"
[3532]	1847	MakeISO
[3522]	1848	else
[3534]	1849	if [ "$ARCH" = "ia64" ]; then
	1850	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
	1851	else
	1852	# UEFI
	1853	echo "$CMD" \| grep -q "xorriso"
	1854	if [ $? -eq 0 ]; then
[3598]	1855	XOV=`xorriso --version 2>&1 \| head -1 \| awk '{print $3}'`
	1856	XOVMAJ=`echo $XOV \| cut -d. -f1`
	1857	XOVMIN=`echo $XOV \| cut -d. -f2`
	1858	if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
	1859	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
	1860	else
	1861	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
	1862	fi
[3534]	1863	else
	1864	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
	1865	fi
	1866	fi
[3522]	1867	fi
	1868	fi
	1869
[3546]	1870	# Avoids graphical tool to keep the FS mounted
	1871	sync
[3522]	1872	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1873
	1874	if [ "$target" = "ISO" ]; then
[3532]	1875	cp $part $MINDI_CACHE
[3533]	1876	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
[3692]	1877	# Mount again !
	1878	LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
	1879	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
[3535]	1880	# We just need the EFI dir and the boot image for this case
[3536]	1881	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1882	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1883	# We need again the kernel+initrd at the root for UEFI boot at least
	1884	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1885	# We need the boot image now and what mindi needs at restore time as well
	1886	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1887	# Avoids graphical tool to keep the FS mounted
	1888	sync
[3535]	1889	umount $MINDI_TMP/mpt2
	1890	LogFile "----------- target dir content -----------"
	1891	LogFile "------------------------------------------"
	1892	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1893	LogFile "------------------------------------------"
[3532]	1894	MakeISO
[3522]	1895	fi
	1896	else
	1897	# USB
[1684]	1898	if [ "$ARCH" != "ia64" ] ; then
[2939]	1899	syslinux -v 2>&1 \| grep -q 4.02
	1900	if [ $? -eq 0 ]; then
	1901	# This buggy version of syslinux requires a call to --stupid and not -s
	1902	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1903	res=$?
	1904	else
	1905	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1906	res=$?
	1907	fi
	1908	if [ $res -ne 0 ] ; then
[2963]	1909	LogAll "----------- syslinux's errors --------------"
[1684]	1910	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1911	LogAll "------------------------------------------"
[3565]	1912	LogAll "ERROR: Failed to create USB image."
[1684]	1913	else
[2963]	1914	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1915	fi
	1916	rm -f $MINDI_TMP/syslinux.log
	1917	else
[2963]	1918	LogAll "ERROR: No USB boot support for ia64"
[1684]	1919	MindiExit -1
	1920	fi
[3522]	1921	fi
[1684]	1922	}
	1923
	1924
[3522]	1925	OfferToMakeBootableUSB() {
	1926
	1927	local i files
	1928
	1929	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1930	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1931	read i
	1932	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1933	if [ "$USBDEVICE" = "" ]; then
	1934	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1935	read dev
	1936	USBDEVICE=$dev
	1937	fi
	1938	echo "WARNING: This will erase all content on $USBDEVICE"
	1939	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1940	read i
	1941	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1942	else
	1943	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1944	Die "No USBDEVICE environment variable declared, aborting"
	1945	fi
	1946	fi
	1947	USBPART="${USBDEVICE}1"
	1948
	1949	MakeBootableDevice USB
	1950	}
	1951
	1952
	1953	OfferToMakeBootableISO() {
	1954
	1955	local i files
	1956
	1957	if [ -z "$ISO_CMD" ]; then
	1958	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1959	return
	1960	fi
	1961
	1962	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1963	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1964	read i
	1965	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1966	fi
	1967
	1968	MakeBootableDevice ISO
	1969	}
	1970
	1971
[747]	1972	MakeMessageFile() {
[2292]	1973
	1974	if [ -x "/bin/lsb_release" ]; then
	1975	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1976	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1977	DESC="Arch Linux"
	1978	if [ -r /var/log/pacman.log ]; then
	1979	# there are no releases but we can get the last system upgrade
	1980	# Output example: Arch Linux [2011-03-03 01:39]
	1981	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1982	fi
[3426]	1983	elif [ -x "/etc/os-release" ]; then
	1984	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1985	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1986	# For pb >= 0.9.8
	1987	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1988	elif [ -r /etc/issue.net ]; then
[2731]	1989	DESC=`head -1 /etc/issue.net`
[2732]	1990	elif [ -r /etc/issue ]; then
[2731]	1991	DESC=`head -1 /etc/issue`
[747]	1992	else
[2731]	1993	DESC="Unknown desc"
[747]	1994	fi
[2292]	1995	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1996	if [ _"$MONDO_SHARE" != _"" ]; then
	1997	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1998	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1999	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	2000	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	2001	elif [ ! "$MINDI_TMP" ] ; then
[3522]	2002	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	2003	if [ -e "$MINDI_LIB/memtest.img" ] ; then
[3653]	2004	echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
[3522]	2005	fi
[1885]	2006	else
	2007	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	2008	fi
[1983]	2009	else
	2010	echo -en "\
[747]	2011	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	2012	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	2013	fi
[747]	2014	fi
[3173]	2015
	2016	# Also create the other help screens
	2017	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	2018	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	2019	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	2020	}
	2021
	2022
[1983]	2023	MakeBootConfFile() {
[1885]	2024	local options i ooo
[747]	2025	options=""
[1983]	2026	# Type of boot file (elilo or syslinux/isolinux)
	2027	type=$1
[3588]	2028	if [ "$type" = "elilo" ] \|\| [ "$type" = "grub2" ]; then
[1983]	2029	sep="="
[3398]	2030	sepdef="="
[1983]	2031	else
	2032	sep=" "
[3398]	2033	sepdef=" "
[1983]	2034	fi
[925]	2035
[1983]	2036	# Generic header for conf file
[3398]	2037	if [ "$type" = "elilo" ]; then
	2038	echo -en "prompt\n"
	2039	elif [ "$type" = "grub" ]; then
	2040	echo -en "pause Press a key when ready to restore\n"
[3518]	2041	elif [ "$type" = "grub2" ]; then
	2042	echo -en "set "
[3398]	2043	else
[3535]	2044	# syslinux family
[3173]	2045	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	2046	fi
[1983]	2047
	2048	# Compute which default option to boot from
[3398]	2049	echo -en "default${sepdef}"
[747]	2050	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	2051	if [ "$type" = "grub" ]; then
[3430]	2052	# TODO: Which num ???
[3398]	2053	echo -en "0\n"
	2054	else
	2055	echo -en "RESTORE\n"
	2056	fi
[1983]	2057	# In case it's mondoarchive
[1885]	2058	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	2059	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	2060	if [ "$type" = "grub" ]; then
	2061	echo -en "3\n"
	2062	else
	2063	echo -en "iso\n"
	2064	fi
[747]	2065	else
[3398]	2066	if [ "$type" = "grub" ]; then
	2067	echo -en "1\n"
	2068	else
	2069	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	2070	fi
[747]	2071	fi
	2072	else
[3398]	2073	if [ "$type" = "grub" ]; then
	2074	echo -en "0\n"
	2075	else
	2076	echo -en "expert\n"
	2077	fi
[747]	2078	fi
	2079
[1983]	2080	# Handle timeout
[3588]	2081	if [ "$type" = "grub2" ]; then
	2082	seppref="set "
	2083	else
	2084	seppref=""
[3518]	2085	fi
[3587]	2086	if [ "$CDRECOVERY" = "yes" ] ; then
[3588]	2087	echo -en "${seppref}timeout${sep}10000\n"
[3587]	2088	else
[3588]	2089	echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[747]	2090	fi
	2091	echo -en "\n"
[1983]	2092
[2124]	2093	# prepare which labels will be generated
[747]	2094	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2095	options="RESTORE expert"
[1885]	2096	else
	2097	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2098	options="interactive expert compare iso nuke isonuke"
[747]	2099	else
	2100	options="expert"
[925]	2101	fi
[747]	2102	fi
[1983]	2103
	2104	# Generate rest of conf file
[747]	2105	for i in $options ; do
[925]	2106	ooo=$i
[3111]	2107	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	2108	if [ "$type" = "elilo" ]; then
[3692]	2109	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]	2110	elif [ "$type" = "grub" ]; then
[3692]	2111	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2112	elif [ "$type" = "grub2" ]; then
[3535]	2113	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2114	lorder="linuxefi"
	2115	iorder="initrdefi"
	2116	else
	2117	lorder="linux"
	2118	iorder="initrd"
	2119	fi
[3692]	2120	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2121	else
[2073]	2122	ps="/"
[2629]	2123	if [ $KERNEL_IS_XEN = "no" ]; then
[3692]	2124	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
[2629]	2125	else
[3692]	2126	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
[2629]	2127	fi
[925]	2128	fi
[1885]	2129	echo -en "$outstr"
[747]	2130	done
[1983]	2131	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	2132	if [ "$type" = "elilo" ]; then
	2133	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	2134	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]	2135	elif [ "$type" = "grub" ]; then
[3415]	2136	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2137	elif [ "$type" = "grub2" ]; then
	2138	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2139	else
[2073]	2140	ps="/"
	2141	if [ "$type" = "syslinux" ]; then
	2142	ps=""
	2143	fi
	2144	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2145	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2146	fi
	2147	fi
[747]	2148	}
	2149
[2006]	2150	ParseModprobeForIncludes() {
	2151	local MODPROBE_CONF mpincfile includes include
	2152
	2153	MODPROBE_CONF=/etc/modprobe.conf
	2154	mpincfile=$1
	2155	touch $mpincfile
	2156	if [ -a $MODPROBE_CONF ]; then
[2431]	2157	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2158	if [ -n "$includes" ]; then
	2159	for include in $includes
	2160	do
	2161	if [ -a "$include" ]; then
	2162	echo $include >> $mpincfile
	2163	fi
	2164	done
	2165	fi
	2166	fi
	2167	}
	2168
[3585]	2169	PrepareBootDir() {
[2006]	2170
[3692]	2171	local detect
	2172	# Needs a bigdir variable setup before calling it
[3585]	2173
	2174	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
	2175	# to get it on the media (in addition to the boot part
	2176	# and also to support UEFI boot mechanism
	2177	if [ "$boottype" != "" ]; then
	2178	detect="no"
	2179	else
	2180	detect="yes"
	2181	boottype=syslinux
	2182	fi
	2183	bootdir=$bigdir/$boottype
	2184	bootconf="$bootdir/$boottype.cfg"
	2185	mkdir -p $bootdir
	2186	FindLdlinux32Binary
	2187
[3725]	2188	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
	2189	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
	2190
[3585]	2191	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2192	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2193	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2194	MindiExit -1
	2195	fi
	2196
	2197	mountefi=0
	2198	# EFI or UEFI
	2199	# TODO: names are hard-coded for now
	2200	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2201	# UEFI
	2202	efidir=$bigdir/EFI/BOOT
	2203	# Auto-detection if needed
	2204	if [ $detect = "yes" ]; then
	2205
	2206	# mount /boot/efi if needed
	2207	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2208	if [ $? -ne 0 ]; then
	2209	mount /boot/efi
	2210	if [ $? -ne 0 ]; then
	2211	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
	2212	MindiExit -1
	2213	fi
	2214	mountefi=1
	2215	fi
	2216
	2217	# On RHEL6 grub works
[3602]	2218	if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
[3585]	2219	boottype=grub
[3652]	2220	elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
[3585]	2221	boottype=grub2
[3652]	2222	elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
[3609]	2223	boottype=grub2
[3710]	2224	elif [ $dname = "sles" ] && [ $dver -ge 12 ]; then
	2225	boottype=grub2
[3652]	2226	elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
[3585]	2227	boottype=grub2
	2228	else
	2229	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2230	boottype=syslinux
	2231	fi
	2232	fi
	2233	if [ "$boottype" = "syslinux" ]; then
	2234	if [ ! "$bootbin" ]; then
	2235	FindSyslinux64EFI
	2236	bootbin=$SYSLINUX64EFI
	2237	fi
	2238	bootconf="$efidir/syslinux.cfg"
	2239	elif [ "$boottype" = "grub" ]; then
	2240	if [ ! "$bootbin" ]; then
	2241	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2242	fi
	2243	bootconf="$efidir/BOOTX64.conf"
	2244	elif [ "$boottype" = "grub2" ]; then
	2245	if [ ! "$bootbin" ]; then
	2246	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2247	fi
	2248	bootconf="$efidir/grub.cfg"
	2249	fi
	2250
	2251	# Depending on the arch, the target boot file is different
	2252	if [ "$ARCH" = "x86_64" ] ; then
	2253	tgbin="BOOTX64.efi"
	2254	elif [ "$ARCH" = "armv8" ]; then
	2255	tgbin="BOOTAA64.efi"
	2256	else
	2257	# i?386
	2258	tgbin="BOOTIA32"
	2259	fi
	2260	else
	2261	# EFI
	2262	efidir=$bootdir
	2263	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
	2264	tgbin=$bootbin
	2265	boottype=elilo
	2266	bootconf="$efidir/elilo.conf"
	2267	fi
	2268	LogAll "INFO: Found $boottype boot type"
	2269	mkdir -p $efidir
	2270	cp $bootbin $efidir/$tgbin
	2271
	2272	if [ $mountefi -eq 1 ]; then
	2273	umount /boot/efi 2>&1 > /dev/null
	2274	fi
	2275
	2276	if [ $boottype = "syslinux" ]; then
	2277	FindLdlinuxe64Binary
	2278	if [ -e "$LDLINUXE64" ]; then
	2279	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2280	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
	2281	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
	2282	if [ -e $LDLINUXE64/../isolinux.c32 ]; then
	2283	cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
	2284	fi
	2285	fi
	2286	fi
	2287	# tgdir for syslinux
	2288	tgdir=$bigdir/EFI
	2289	else
	2290	# tgdir for syslinux
	2291	tgdir=$bootdir
	2292	fi
	2293	# In all cases prepare syslinux content for BIOS mode
	2294	# so that we can have multi boot mode media BIOS+UEFI
	2295	# Useful for syslinux 5.x
	2296	if [ -e "$LDLINUXC32" ]; then
	2297	LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
	2298	cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
	2299	fi
[3725]	2300	if [ -e `dirname $LDLINUXC32`/isolinux.c32 ]; then
[3585]	2301	LogFile "INFO: Copying isolinux.c32 to $tgdir"
[3725]	2302	cp `dirname $LDLINUXC32`/isolinux.c32 $tgdir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
[3585]	2303	fi
	2304
	2305	MakeBootConfFile $boottype > $bootconf
	2306	LogFile "Boot Conf file $bootconf content is:"
	2307	LogFile "------------------------------------"
	2308	cat $bootconf >> $LOGFILE
	2309	LogFile "------------------------------------"
	2310	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2311	# Also generate the syslinux conf
	2312	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
	2313	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2314	LogFile "---------------------------------------------------"
	2315	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
	2316	LogFile "---------------------------------------------------"
[3725]	2317	if [ $dname = "debian" ] && [ $dver -ge 8 ]; then
	2318	# In that case it seems we need conf file at the root of the media
	2319	cp -a $bigdir/EFI/* $bigdir
	2320	fi
[3585]	2321	fi
	2322
	2323	}
	2324
[3692]	2325	PrepareBigDirTar() {
[3585]	2326	echo -en "INFO: Tarring and zipping the data content..."
	2327	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
	2328	LogFile "Size of the data content"
	2329	LogFile "------------------------"
	2330	du -sk $MINDI_CACHE/*gz >> $LOGFILE
	2331	LogFile "------------------------"
	2332	echo -e "$DONE"
	2333
	2334	}
	2335
[3692]	2336	CleanBigDir() {
	2337	[ "$bigdir" != "/" ] && echo $bigdir \| grep -vq $MINDI_TMP && rm -rf $bigdir
	2338	}
[747]	2339
[3692]	2340	PrepareBigDir() {
	2341	local needlist diskdir res i j k lines lfiles includefile
	2342
[3407]	2343	rm -f $MINDI_CACHE/mindi.iso
[940]	2344	needlist=$MINDI_TMP/what-we-need.txt
[747]	2345	mkdir -p $bigdir/usr/bin
[1983]	2346	mkdir -p $bigdir/usr/sbin
[2006]	2347	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2348
[3149]	2349	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2350	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2351	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2352	fi
[1885]	2353	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2354	ParseModprobeForIncludes $includefile
[2019]	2355	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2356	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2357	res=$?
[2006]	2358	rm -f $includefile
[3231]	2359	ListKernelModulePaths >> $needlist
[747]	2360	if [ "$res" -ne "0" ] ; then
[1902]	2361	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2362	fi
	2363	mkdir -p $bigdir/tmp
[1885]	2364	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2365	# TODO: no reason to have the cfg file stored twice
[3278]	2366	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2367	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2368	fi
[3281]	2369
	2370	# Needs to be done after the MRCFG creation
	2371	FindAndAddUserKeyboardMappingFile
	2372
[3166]	2373	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2374	DropOptimizedLibraries $needlist $bigdir
[3522]	2375	echo -en "INFO: Assembling dependency files"
[747]	2376
[3522]	2377	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
[3585]	2378	rm -f $needlist
[3522]	2379	echo -e "$DONE"
[3149]	2380
[925]	2381	# also copy io.sys and msdos.sys, if we can find them
[747]	2382	for i in `mount \| cut -d' ' -f3` ; do
[925]	2383	for j in io.sys msdos.sys ; do
[963]	2384	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2385	done
[747]	2386	done
	2387
[925]	2388	# master boot record, too
[940]	2389	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2390	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2391	LogAll "INFO: Backing up $i's MBR"
[925]	2392	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2393	sleep 1
	2394	sync
	2395	j=$i
	2396	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2397	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2398	mkdir -p $bigdir/dev
[2089]	2399	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2400	fi
	2401
[1983]	2402	# Get terminfo content
	2403	ti="usr/share/terminfo/l"
	2404	if [ -d /$ti ]; then
[3522]	2405	mkdir -p $bigdir/$ti
	2406	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2407	fi
[1764]	2408	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2409	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2410	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2411	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2412	fi
[2290]	2413	if [ -d "/lib/dev-state" ]; then
[3542]	2414	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2415	fi
[940]	2416	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2417	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2418	mkdir -p $bigdir/tmp
[2092]	2419	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[3748]	2420	for i in create-btrfs-subvol mount-btrfs-subvol umount-btrfs-subvol; do
	2421	if [ -r $MINDI_TMP/$i ]; then
	2422	cp -f $MINDI_TMP/$i $bigdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy subvol script $MINDI_TMP/$i to data disk"
	2423	fi
	2424	done
[1885]	2425	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2426	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2427	fi
[2032]	2428	if [ $LVM != "false" ]; then
	2429	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2430	if [ $? -ne 0 ]; then
[2032]	2431	LVM="false"
	2432	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2433	else
[2963]	2434	LogFile "Your i-want-my-lvm file content is:"
	2435	LogFile "-----------------------------------"
[2552]	2436	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2437	LogFile "-----------------------------------"
[2032]	2438	fi
	2439	fi
[3522]	2440	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2441	LogFile "-----------------------------------"
[1902]	2442	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2443	LogFile "-----------------------------------"
[2432]	2444
[2092]	2445	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2446	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2447	if [ _"$MONDO_SHARE" != _"" ]; then
	2448	for q in filelist.full.gz biggielist.txt ; do
	2449	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2450	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2451	done
[3746]	2452	for q in $MBRFILE $GPTMBRFILE; do
	2453	if [ -r $q ]; then
	2454	cp -a $q $bigdir/tmp 2>> $LOGFILE
	2455	else
	2456	LogFile "Unable to copy $q to bigdir. May be unable to restore MBR"
	2457	fi
	2458	done
[1902]	2459	fi
	2460
[3585]	2461	PrepareBootDir
[3692]	2462
[747]	2463	}
	2464
	2465
	2466	Prompt() {
	2467	echo -en "$1"
	2468	read line
	2469	}
	2470
	2471
	2472	ReadLine() {
	2473	local i incoming
	2474	read incoming
	2475	i=0
	2476	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2477	i=$(($i+1))
	2478	read incoming
[747]	2479	done
	2480	echo "$incoming"
	2481	}
	2482
	2483
	2484	SizeOfPartition() {
	2485	local devpath drive res stub
	2486	device=$1
[2917]	2487	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2488	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2489	fi
[747]	2490	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2491	res=`SizeOfRaidPartition $device`
	2492	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2493	echo "$res"
	2494	return 0
[747]	2495	fi
[925]	2496	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2497	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2498	# end patch
[2448]	2499	# take only the first in case of multiple mount (cifs, nfs, ...)
	2500	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2501	[ "$res" = "" ] && res="-1"
	2502	echo $res
	2503	return 0
	2504	}
	2505
	2506
	2507	SizeOfRaidPartition() {
	2508	local real_dev smallest_size silly tmp
	2509
	2510	silly=999999999
	2511	smallest_size=$silly
	2512
	2513	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2514	tmp=`SizeOfPartition $real_dev`
	2515	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2516	done
	2517
	2518	if [ "$smallest_size" = "$silly" ] ; then
[925]	2519	echo "-1"
	2520	return 1
[747]	2521	else
[925]	2522	echo "$smallest_size"
	2523	return 0
[747]	2524	fi
	2525	}
	2526
	2527
	2528	StripExecutable()
	2529	{
	2530	local tmpfile
[925]	2531
[940]	2532	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2533	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2534	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2535	strip $tmpfile 2> /dev/null
[3528]	2536	if [ $? -eq 0 ] ; then
[963]	2537	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2538	LogFile "INFO: Stripped binary $2"
[747]	2539	fi
	2540	rm -f $tmpfile
	2541	}
	2542
[2292]	2543	KernelVer() {
	2544	local fkern_ver fname
[747]	2545
[2292]	2546	fname=$1
	2547	file $fname \| grep -q gzip
[3528]	2548	if [ $? -eq 0 ] ; then
[2292]	2549	# Used by ia64
[3528]	2550	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2551	else
[3528]	2552	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2553	fi
	2554	echo "$fkern_ver"
	2555	}
	2556
	2557
[2880]	2558	# WARNING: This function should just echo the final result !!!
	2559	#
[747]	2560	TryToFindKernelPath() {
[2880]	2561	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2562
[2292]	2563	we_want_version=$KERVERRUN
[747]	2564	possible_kernels=""
	2565	duff_kernels=""
[2880]	2566	output=""
[3368]	2567
[747]	2568	if [ "$ARCH" = "ia64" ] ; then
	2569	root="/boot/efi/efi"
	2570	else
	2571	root="/"
	2572	fi
[2681]	2573	# See if we're booted from a Xen kernel
[2889]	2574	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2575	if [ -f /proc/xen/capabilities ]; then
[2681]	2576	# It's a Xen kernel
	2577	KERNEL_IS_XEN="yes"
[2963]	2578	LogFile "INFO: It's a Xen kernel..."
[2681]	2579	fi
	2580
[3122]	2581	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2582	[ ! -e "$fname" ] && continue
[747]	2583	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2584	fkern_ver=`KernelVer $fname`
[747]	2585	[ "$fkern_ver" = "" ] && continue
	2586	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2587	[ -f "$fname" ] \|\| continue
	2588	[ -h "$fname" ] && continue
	2589	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2590	file $fname \| grep -q gzip
[3528]	2591	if [ $? -eq 0 ] ; then
[925]	2592	# Used by ia64
	2593	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2594	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2595	duff_kernels="$fname $duff_kernels"
	2596	else
[747]	2597	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2598	possible_kernels="$fname $possible_kernels"
[925]	2599	fi
[747]	2600	else
[925]	2601	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2602	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2603	duff_kernels="$fname $duff_kernels"
	2604	else
[747]	2605	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2606	possible_kernels="$fname $possible_kernels"
[925]	2607	fi
[747]	2608	fi
	2609	done
	2610	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2611	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2612	fi
	2613	if [ ! "$possible_kernels" ] ; then
[3149]	2614	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2615	possible_kernels="$duff_kernels"
	2616	if [ ! "$possible_kernels" ] ; then
[3149]	2617	LogAll "INFO: Sorry, no duff kernels either"
[747]	2618	else
[3149]	2619	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2620	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2621	fi
	2622	fi
[2681]	2623	if [ $KERNEL_IS_XEN = "yes" ]; then
	2624	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2625	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2626	fi
[2829]	2627	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2628	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2629	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2630	LogAll "Could not find your kernel."
[925]	2631	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2632	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2633	output=/boot/vmlinuz
[747]	2634	else
[925]	2635	output=""
	2636	fi
[747]	2637	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2638	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2639	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2640	output="$kp"
[747]	2641	else
	2642	for i in $possible_kernels ; do
[2880]	2643	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2644	LogAll "INFO: OK, I used my initiative and found that "
	2645	LogAll "INFO: $i is probably your kernel. "
[925]	2646	output="$i"
[2858]	2647	break
[925]	2648	fi
[747]	2649	done
[2858]	2650	if [ ! -n "$output" ]; then
[2880]	2651	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2652	output=/boot/vmlinuz
[2963]	2653	LogFile "INFO: Schlomo, this one's for you."
[2681]	2654	else
[3651]	2655	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
[2963]	2656	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
[3651]	2657	LogFile "INFO: $possible_kernels"
	2658	output=""
[2681]	2659	fi
	2660	fi
	2661	fi
	2662	if [ $KERNEL_IS_XEN = "yes" ]; then
	2663	if [ "$noof_xenkernels" -eq "0" ]; then
	2664	xenkernelpath=""
	2665	elif [ "$noof_xenkernels" -eq "1" ]; then
	2666	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2667	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2668	else
[2681]	2669	for i in $possible_xenkernels ; do
[2880]	2670	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2671	LogFile "INFO: OK, I used my initiative and found that "
	2672	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2673	xenkernelpath="$i"
[2858]	2674	break
[2681]	2675	fi
	2676	done
[2858]	2677	if [ ! -n "$xenkernelpath" ]; then
[2681]	2678	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2679	if [ ! -n "$new_possible_xenkernels" ]; then
	2680	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2681	LogFile "INFO: Using $xenkernelpath"
[2681]	2682	else
[2963]	2683	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2684	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2685	LogFile "INFO: $possible_xenkernels"
[2880]	2686	output=""
[2681]	2687	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2688	LogFile "INFO: Using $xenkernelpath"
[2681]	2689	fi
	2690	fi
[925]	2691	fi
[2681]	2692	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2693	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2694	fi
[747]	2695	fi
[3357]	2696	#LogAll "TryToFindKernelPath found $output"
[2681]	2697	echo "$output"
[747]	2698	}
	2699
[3660]	2700	CopyFromConf() {
[747]	2701
[3660]	2702	conf=$1
[3692]	2703	mp=$2
[3660]	2704	echo -en "INFO: Gathering dependencies of $conf.conf..."
[3692]	2705	LogFile "INFO: Gathering dependencies of $conf.conf..."
[3660]	2706	lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf \| sort -u`
	2707	noof_lines=`echo $lis2 \| wc -w`
	2708	progress=0
	2709	# Get only the files which exist in that list
	2710	# and potentially their symlink structure
[3661]	2711	# put apart directories for later handling
[3660]	2712	for f in $lis2; do
	2713	if [ -d $f ]; then
[3661]	2714	for g in `find $f`; do
[3660]	2715	echo $g >> $MINDI_TMP/$conf.lis
	2716	LocateDeps $g >> $MINDI_TMP/$conf.lis2
	2717	done
	2718	lis3="$lis3 $f"
[3661]	2719	else
[3660]	2720	if [ -r $f ]; then
	2721	echo $f >> $MINDI_TMP/$conf.lis
	2722	LocateDeps $f >> $MINDI_TMP/$conf.lis2
	2723	fi
	2724	fi
	2725	progress=$(($progress+1))
	2726	LogProgress $progress $noof_lines
	2727	done
	2728	echo -e "$DONE"
[3692]	2729	LogAll "INFO: Processing all dependencies links for $conf.conf..."
[3662]	2730	# And their deps except dirs
	2731	lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
	2732	rm -f $MINDI_TMP/$conf.lis2
[3660]	2733	finallist=""
[3662]	2734	# Remove directories from the list, as cp will create them anyway
[3660]	2735	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2736	# recent bash says that -d is true for a link to a dir !
[3662]	2737	for f in $lines; do
[3660]	2738	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
	2739	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
[3692]	2740	if [ ! -e "$mp/$f" ]; then
[3660]	2741	finallist="$finallist $f"
	2742	fi
	2743	fi
	2744	done
	2745	# But adds the directory useful in $lis3
[3692]	2746	fnllist=`echo $finallist $lis3 \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2747	LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
	2748	cp -a --parents $fnllist -t $mp/ 2> $templog \|\| LogAll "WARNING: Problem in $conf analysis" $templog
[3662]	2749	rm -f $MINDI_TMP/$conf.lis
[3660]	2750	}
	2751
[3692]	2752	PrepareTargetDir() {
	2753	local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2754
[3692]	2755	tgz_dir_fname=$MINDI_LIB/rootfs
	2756	rdz_fname=$MINDI_TMP/initrd.img
	2757	kernelsize=`du -sk $kernelpath \| cut -f1`
[3403]	2758	res=0
	2759	templog=$MINDI_TMP/$$.log
	2760	> $templog
	2761
[3692]	2762	mkdir -p $targetdir
[3248]	2763	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2764	for d in bin sbin lib lib64; do
	2765	if [ -h "/$d" ]; then
	2766	thelink=`readlink /$d`
[3692]	2767	mkdir -p $targetdir/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $targetdir"
	2768	mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
	2769	if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
	2770	rmdir $targetdir/$d
[3248]	2771	fi
[3692]	2772	if [ ! -h $targetdir/$d ]; then
	2773	rm -f $targetdir/$d 2> /dev/null
	2774	(cd $targetdir ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
[3248]	2775	fi
	2776	fi
	2777	done
[3357]	2778
[3692]	2779	LogFile "INFO: what is now in $targetdir"
	2780	ls -al $targetdir >> $LOGFILE
[3172]	2781
[2963]	2782	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3692]	2783	# copy from rootfs into targetdir
	2784	LogAll "INFO: Copying Mindi files onto $targetdir"
[3661]	2785	for f in $tgz_dir_fname/*; do
[2963]	2786	if [ ! -r $f ]; then
	2787	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2788	else
[3692]	2789	cp -af $f $targetdir 2>&1 >> $LOGFILE
[2963]	2790	fi
	2791	done
[3692]	2792	(cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2793	# kernel expects linuxrc in ext2 filesystem
	2794	(cd $targetdir ; ln -sf usr/sbin/init linuxrc)
	2795	# kernel expects init in cpio filesystem
	2796	(cd $targetdir ; ln -sf usr/sbin/init init)
[1914]	2797
[3692]	2798	(cd $targetdir/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2799
	2800	for w in insmod.static insmod.static.old ; do
[925]	2801	s=`which $w 2> /dev/null`
	2802	if [ -e "$s" ] ; then
[3692]	2803	tar cf - -C / $s 2> /dev/null \| (cd $targetdir ; tar xf -)
[925]	2804	fi
[747]	2805	done
	2806
	2807	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2808
[2438]	2809	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3692]	2810	mkdir -p $targetdir/.ssh $targetdir/tmp
	2811	cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
	2812	cat > $targetdir/tmp/myssh << EOF
	2813	ssh -o StrictHostKeyChecking=no \$*
[2438]	2814	EOF
[3692]	2815	chmod 755 $targetdir/tmp/myssh
[2438]	2816
[2039]	2817	# Copy of files mandatory for ld.so
[3692]	2818	cp -a /etc/ld.so.c* $targetdir/etc
[2039]	2819
[2951]	2820	# Handle the case where busybox and mount are dynamically linked
[3231]	2821	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2822	if [ $? -eq 0 ]; then
	2823	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3692]	2824	rm -f $targetdir/bin/mount
[2951]	2825	fi
	2826
[3522]	2827	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
[3692]	2828	CopyFromConf minimal $targetdir
[3357]	2829
	2830	# For older distributions expecting /sbin/init provides it
[3692]	2831	if [ ! -e "$targetdir/sbin/init" ]; then
	2832	(cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2833	fi
	2834
[3000]	2835	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3692]	2836	(cd $targetdir ; ln -sf /bin/bash bin/sh)
[3405]	2837	LogFile "INFO: Using bash as default shell"
[2951]	2838
	2839	# Avoids an issue on some distro (RHEL5)
[3692]	2840	rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
[2164]	2841
[3661]	2842	# Management of DRBD
	2843	which drbdadm &> /dev/null
	2844	if [ $? -eq 0 ]; then
	2845	# Do we find DRBD devices setup
	2846	drbdadm sh-dev all \| grep -E '^/dev' &> /dev/null
	2847	if [ $? -eq 0 ]; then
[3692]	2848	CopyFromConf drbd $targetdir
[3661]	2849	fi
	2850	# DRBD requires net activation
	2851	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
	2852	fi
	2853
[1724]	2854	# Management of udev (which includes modprobe in rules)
[1759]	2855	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2856	if [ $? -eq 0 ]; then
[3692]	2857	echo "udev device manager found" > $targetdir/tmp/USE-UDEV
[3405]	2858	LogFile "INFO: udev device manager found"
[3692]	2859	tar cf - -C / /etc/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2860	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3692]	2861	rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2862	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2863	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3692]	2864	tar cf - -C / /lib64/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2865	fi
[2895]	2866	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3692]	2867	tar cf - -C / /lib32/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2868	fi
	2869	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3692]	2870	tar cf - -C / /lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2871	fi
[3261]	2872	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3692]	2873	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2874	fi
[3489]	2875	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[3692]	2876	CopyFromConf udev $targetdir
[1720]	2877	else
[2965]	2878	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2879	LogAll " mindi will use static devices which may cause problems"
[3692]	2880	rm -f $targetdir/tmp/USE-UDEV
[1720]	2881	fi
[1716]	2882	fi
[1786]	2883
[2882]	2884	# Management of potential HW info (ProLiant only at the moment)
[1880]	2885	rm -rf $MINDI_CACHE/bkphw
	2886	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2887	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2888	LogAll "INFO: Hardware Information found and saved ..."
[3692]	2889	cp -rp $MINDI_CACHE/bkphw $targetdir
[1880]	2890	if [ -f $MINDI_CACHE/tools.files ]; then
	2891	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2892	LocateDeps $lis > $MINDI_TMP/tools.lis
[3692]	2893	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2894	fi
[1880]	2895	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3692]	2896	mv -f $MINDI_CACHE/mindi-rsthw $targetdir
	2897	chmod 755 $targetdir/mindi-rsthw
[1761]	2898	fi
[1880]	2899	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2900	fi
	2901
[2183]	2902	# Management of perl scripts delivered needed at restore time
[3522]	2903	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2904	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2905	LogFile "DBG4: Perl Modules found:"
	2906	LogFile "-------------------------"
[3403]	2907	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2908	LogFile "-------------------------"
[3692]	2909	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2910
[3692]	2911	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2912
[1885]	2913	needed_modules=""
[3697]	2914	list_of_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2915
[3270]	2916	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2917	# For PXE boot
[3697]	2918	list_of_mods="$list_of_mods $NET_MODS"
[747]	2919	fi
[1727]	2920	for i in $DENY_MODS; do
[2963]	2921	LogFile "INFO: Removing $i from the list of modules to load"
[3697]	2922	list_of_mods=`echo ${list_of_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
[1727]	2923	done
	2924
[3253]	2925	if [ "${kernelname}" != "" ]; then
	2926	needed_modules_path=lib/modules/${kernelname}
[3257]	2927	mkgmopt="-k ${kernelname}"
[3253]	2928	else
	2929	needed_modules_path=lib/modules/$KERVERRUN
	2930	mkgmopt="-k $KERVERRUN"
	2931	fi
[1914]	2932
[3565]	2933	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2934	LogAll "INFO: Analyzing kernel modules dependencies..."
[3697]	2935	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_mods`
[3253]	2936
[3257]	2937	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3692]	2938	cp --parents -aL $needed_modules $targetdir/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $targetdir" $templog
[3253]	2939
	2940	# Uncompress modules if not using udev and native modprobe
[3692]	2941	if [ ! -f $targetdir/tmp/USE-UDEV ]; then
[3253]	2942	for i in $needed_modules; do
	2943	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[3692]	2944	gunzip -f $targetdir/$i
[1815]	2945	fi
[3253]	2946	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
[3692]	2947	bunzip2 -f $targetdir/$i
[3253]	2948	fi
	2949	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
[3692]	2950	unxz -f $targetdir/$i
[3253]	2951	fi
	2952	LogFile "INFO: Uncompressing $i"
	2953	done
	2954	fi
[1815]	2955
[2964]	2956	# Also copy modules.* in case of udev so that normal modprobe works
[3692]	2957	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$targetdir" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
[1815]	2958
[2680]	2959	# Copy FW in case some drivers needs it
[3163]	2960	for d in "/lib" "/usr/lib"; do
[3201]	2961	if [ -d "$d/firmware" -a ! -h $d ]; then
[3692]	2962	cp -a "$d/firmware" "$targetdir$d"
[3163]	2963	fi
	2964	done
[2680]	2965
[3163]	2966	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2967	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2968	if [ -d "$d/multipath" -a ! -h $d ]; then
[3692]	2969	cp -a "$d/multipath" "$targetdir$d"
[3163]	2970	fi
	2971	done
	2972
[3326]	2973	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3692]	2974	(cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2975
[2913]	2976	# Copy an additional ProLiant tool for OBDR support
	2977	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2978	found=0
[2913]	2979	if [ -x /usr/bin/hpsa_obdr_mode ]; then
[3692]	2980	mkdir -p $targetdir/usr/bin
	2981	cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
[3565]	2982	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2983	found=1
	2984	fi
	2985	if [ -x /usr/bin/sg_wr_mode ]; then
[3692]	2986	mkdir -p $targetdir/usr/bin
[3135]	2987	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2988	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3692]	2989	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
[3565]	2990	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2991	found=1
	2992	fi
	2993	if [ $found -eq 0 ]; then
	2994	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2995	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2996	fi
	2997	fi
	2998
[3499]	2999	if [ ! -e "/sbin/devfsd" ]; then
[2963]	3000	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	3001	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[3692]	3002	rm -f $targetdir/sbin/devfsd
[747]	3003	fi
[3692]	3004	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
[1885]	3005	if [ _"$MONDO_SHARE" != _"" ]; then
[3692]	3006	MakeMondoConfigFile $targetdir/tmp/$MRCFG
	3007	cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
	3008	cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
	3009	echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
	3010	echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
[747]	3011	fi
[3310]	3012
	3013	# Create module list to load at restore time
[3692]	3014	rm -f $targetdir/tmp/modules
[3310]	3015	for m in $CDROM_MODS; do
[3692]	3016	echo $m >> $targetdir/tmp/modules
[3310]	3017	done
	3018
[3692]	3019	mkdir -p $targetdir/proc
[2963]	3020	LogFile "---------------------------"
[3692]	3021	LogFile "Content of initial targetdir:"
	3022	LogFile "---------------------------- "
	3023	(cd "$targetdir" ; ls -Rla ) >> $LOGFILE
[3372]	3024	LogFile "---------------------------"
[3692]	3025	}
[2438]	3026
[3692]	3027	CleanTargetDir() {
	3028	[ "$targetdir" != "/" ] && rm -rf $targetdir
	3029	}
	3030
	3031	PatchBootFiles() {
	3032
	3033	# Patch the real value of RAMDISK_SIZE now we have it
	3034	if [ -d "$bigdir/syslinux" ]; then
	3035	find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
	3036	fi
	3037	if [ -d "$bigdir/EFI" ]; then
	3038	find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
	3039	fi
	3040	for i in `cat $MINDI_TMP/bootf.lis`; do
	3041	perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
	3042	done
	3043	rm -f $MINDI_TMP/bootf.lis
	3044
	3045	}
	3046
	3047	MakeBootInitFile() {
	3048
	3049	local mountpoint tempfile res
	3050	tempfile=$MINDI_TMP/temp.rd
	3051	res=0
	3052
	3053	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	3054	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	3055
	3056	LogAll "INFO: Creating ext2 filesystem on $tempfile"
	3057	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
	3058	res=$(($res+$?))
	3059
	3060	mountpoint=$MINDI_TMP/mountpoint.$$
	3061	mkdir -p $mountpoint
	3062	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	3063	[ "$targetdir" = "/" ] && echo $targetdir \| grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
	3064	mv $targetdir/* $targetdir/.??* $mountpoint \|\| Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
	3065	res=$(($res+$?))
	3066	rmdir $targetdir
	3067
	3068	LogFile "INFO: initrd image is $rdz_fname"
[1230]	3069	# Determine what filesystem to use for initrd image
[2963]	3070	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	3071	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	3072	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	3073	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	3074	# say what will be used
[2963]	3075	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	3076	# unmount loop filesystem and create image file using the standard approach
[3546]	3077	sync
[1230]	3078	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	3079	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3692]	3080	res=$(($res+$?))
[3008]	3081	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	3082	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	3083	else
	3084	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	3085	fi
[2564]	3086	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	3087	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[3692]	3088	res=$(($res+$?))
[1764]	3089	rm -f ${rdz_fname}.tmp
[2390]	3090	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	3091	# say what will be used
[2963]	3092	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	3093	# make sure that cpio is there
	3094	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	3095	# create cpio image file and unmount loop filesystem
[3524]	3096	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3692]	3097	res=$(($res+$?))
[3546]	3098	sync
[1230]	3099	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[2390]	3100	else
[1230]	3101	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	3102	fi
	3103
[3692]	3104	# log that we are done
[747]	3105	if [ "$res" -eq "0" ] ; then
[3525]	3106	LogAll "INFO: MakeBootInitFile finished without error."
[747]	3107	else
[3525]	3108	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	3109	fi
[3692]	3110
[747]	3111	return 0
	3112	}
	3113
	3114
	3115	##############################################################################
[1021]	3116	#----------------------------------- Main -----------------------------------#
[747]	3117	##############################################################################
	3118
[1885]	3119	# Now we can create what we need
	3120	mkdir -p $MINDI_TMP
[3692]	3121	export bigdir=$MINDI_TMP/bigdir.$$
	3122	export targetdir=$MINDI_TMP/targetdir.$$
[747]	3123
[2995]	3124	# --nolog needs to be first, and is used in analyze-my-lvm
	3125	if [ "$1" = "--nolog" ] ; then
	3126	shift
	3127	LOGFILE=/dev/stderr
	3128	else
	3129	> $LOGFILE
	3130	fi
[1885]	3131	if [ "$1" = "--printvar" ] ; then
	3132	shift
	3133	if [ _"$1" != _"" ] ; then
	3134	set \| grep -Ew "^$1" \| cut -d= -f2
	3135	fi
[2183]	3136	exit 0
[1885]	3137	fi
	3138
[2963]	3139	LogFile "mindi v$MINDI_VERSION"
[3513]	3140	LogFile "-----------------------------"
	3141	LogFile "Start date : `date`"
	3142	LogFile "-----------------------------"
[2963]	3143	LogFile "$ARCH architecture detected"
	3144	LogFile "mindi called with the following arguments:"
[2978]	3145	echo "$@">> $LOGFILE
[2963]	3146	LogFile "-----------------------------"
[3650]	3147	pbdistrocheck --version \| grep Version >> $LOGFILE
[3513]	3148	LogFile "pbdistrocheck results:"
	3149	pbdistrocheck >> $LOGFILE
	3150	LogFile "-----------------------------"
[3650]	3151	LogFile "MondoRescue perl module:"
	3152	mr-getparam --version \| grep Version >> $LOGFILE
	3153	LogFile "-----------------------------"
[747]	3154
[1010]	3155	# Log some capital variables
	3156	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3157	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3158	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3159	LogFile "MINDI_LIB = $MINDI_LIB"
	3160	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3161	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3162	# Purge from potential old run
	3163	if [ _"$MINDI_CACHE" = _"" ]; then
	3164	Die "MINDI_CACHE undefined"
	3165	else
	3166	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3167	fi
	3168
[1885]	3169	if [ -f $MINDI_CONFIG ]; then
[2963]	3170	LogFile "-----------------------------"
[3714]	3171	LogFile "Mindi configuration file "
[2963]	3172	LogFile "-----------------------------"
[1885]	3173	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3174	LogFile "-----------------------------"
[1885]	3175	fi
[2995]	3176	LogFile "In Mindi"
	3177	LogFile "--------"
	3178	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3179	LogFile "--------"
[1010]	3180
[747]	3181	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3182
	3183	# Sanity checks
	3184	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3185	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3186	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3187	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3188	if which awk &> /dev/null ; then
	3189	if ! which gawk &> /dev/null ; then
[3565]	3190	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3191	fi
	3192	fi
	3193	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3194	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3195
[3005]	3196	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3197
	3198	# Update the PATH variable if incomplete
	3199	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3200	PATH=$PATH:/sbin:/usr/sbin
	3201	export PATH
[2963]	3202	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3203	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3204	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3205	fi
	3206
[1737]	3207	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3208	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3209	fi
	3210
[3149]	3211	### TODO
[747]	3212	### Fix as it's not mandatory on ia64
	3213	if [ "$ARCH" = "ia64" ] ; then
[1010]	3214	if which elilo &> /dev/null ; then
	3215	LILO_EXE=elilo
	3216	else
[2024]	3217	LILO_EXE=`which false 2> /dev/null`
[1010]	3218	fi
[747]	3219	else
	3220	FindIsolinuxBinary
	3221	fi
	3222	trap "Aborted" SIGTERM
	3223	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3224	kernelpath=""
[1010]	3225	MONDO_ROOT=/var/cache/mondo
[747]	3226	mkdir -p $MONDO_ROOT
	3227
	3228	if [ -d "/proc/lvm" ]; then
	3229	# LVM v1
	3230	LVMCMD=""
	3231	LVM="v1"
	3232	elif [ -d "/dev/mapper" ]; then
	3233	# LVM v2
	3234	LVMCMD="lvm"
	3235	LVM="v2"
	3236	else
	3237	LVM="false"
	3238	fi
[3149]	3239
	3240	if [ -e "/proc/cmdline" ]; then
	3241	CMDLINE="/proc/cmdline"
	3242	elif [ -e "/tmp/cmdline" ]; then
	3243	CMDLINE="/tmp/cmdline"
	3244	else
	3245	CMDLINE="/dev/null"
	3246	fi
	3247
[2963]	3248	LogFile "INFO: LVM set to $LVM"
	3249	LogFile "----------"
	3250	LogFile "mount result:"
	3251	LogFile "-------------"
[1230]	3252	mount >> $LOGFILE
[3479]	3253	if [ -e "/etc/raidtab" ]; then
[2963]	3254	LogFile "-------------"
	3255	LogFile "/etc/raidtab content:"
	3256	LogFile "-------------"
[1315]	3257	cat /etc/raidtab >> $LOGFILE
[3077]	3258	else
[3073]	3259	LogFile "No file /etc/raidtab"
[1315]	3260	fi
[3479]	3261	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3262	LogFile "-------------"
	3263	LogFile "/etc/mdadm.conf content:"
	3264	LogFile "-------------"
	3265	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3266	else
[3149]	3267	LogFile "-------------"
[3073]	3268	LogFile "No file /etc/mdadm.conf"
[2981]	3269	fi
[2963]	3270	LogFile "-------------"
[3149]	3271	LogFile "cat $CMDLINE"
[2963]	3272	LogFile "-------------"
[3149]	3273	cat $CMDLINE >> $LOGFILE
[2963]	3274	LogFile "-------------"
	3275	LogFile "cat /proc/swaps:"
	3276	LogFile "-------------"
[2014]	3277	cat /proc/swaps >> $LOGFILE
[2963]	3278	LogFile "-------------"
[3479]	3279	if [ -e "/proc/mdstat" ]; then
[3073]	3280	LogFile "cat /proc/mdstat:"
	3281	LogFile "-------------"
	3282	cat /proc/mdstat >> $LOGFILE
[3077]	3283	else
[3073]	3284	LogFile "No pseudo file /proc/mdstat"
	3285	fi
[2981]	3286	LogFile "-------------"
[2963]	3287	LogFile "cat /proc/partitions:"
	3288	LogFile "-------------"
[2015]	3289	cat /proc/partitions >> $LOGFILE
[2963]	3290	LogFile "-------------"
	3291	LogFile "cat /proc/filesystems:"
	3292	LogFile "-------------"
[2015]	3293	cat /proc/filesystems >> $LOGFILE
[2963]	3294	LogFile "-------------"
	3295	LogFile "lsmod result:"
	3296	LogFile "-------------"
[1021]	3297	lsmod >> $LOGFILE
[2431]	3298	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3299	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3300	LogFile "-------------"
	3301	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3302	LogFile "-------------"
	3303	LogFile "VMWare modules"
	3304	LogFile "-------------"
[1531]	3305	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3306	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3307	fi
[3149]	3308	LogFile "-------------"
[2963]	3309	LogFile "FORCE_MODS:"
	3310	LogFile "-------------"
[3065]	3311	LogFile "$FORCE_MODS"
[2963]	3312	LogFile "-------------"
	3313	LogFile "DENY_MODS:"
	3314	LogFile "-------------"
[3065]	3315	LogFile "$DENY_MODS"
[2963]	3316	LogFile "-------------"
	3317	LogFile "df result:"
	3318	LogFile "----------"
[3117]	3319	df -aT >> $LOGFILE
[2963]	3320	LogFile "-------------"
[3117]	3321	LogFile "df -i result:"
	3322	LogFile "----------"
	3323	df -i >> $LOGFILE
	3324	LogFile "-------------"
	3325	if [ -r /boot/grub/menu.lst ]; then
	3326	LogFile "-------------"
	3327	LogFile "INFO: /boot/grub/menu.lst content"
	3328	LogFile "-------------"
	3329	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3330	LogFile "-------------"
[3117]	3331	fi
[3123]	3332	if [ -r /boot/grub/grub.conf ]; then
[3117]	3333	LogFile "-------------"
[3123]	3334	LogFile "INFO: /boot/grub/grub.conf content"
	3335	LogFile "-------------"
	3336	cat /boot/grub/grub.conf >> $LOGFILE
	3337	LogFile "-------------"
	3338	fi
	3339	if [ -r /boot/grub/grub.cfg ]; then
	3340	LogFile "-------------"
	3341	LogFile "INFO: /boot/grub/grub.cfg content"
	3342	LogFile "-------------"
	3343	cat /boot/grub/grub.cfg >> $LOGFILE
	3344	LogFile "-------------"
	3345	fi
[3722]	3346	if [ -r /boot/grub2/grub.cfg ]; then
	3347	LogFile "-------------"
	3348	LogFile "INFO: /boot/grub2/grub.cfg content"
	3349	LogFile "-------------"
	3350	cat /boot/grub2/grub.cfg >> $LOGFILE
	3351	LogFile "-------------"
	3352	fi
[3123]	3353	if [ -r /boot/grub/device.map ]; then
	3354	LogFile "-------------"
[3117]	3355	LogFile "INFO: /boot/grub/device.map content"
	3356	LogFile "-------------"
[3123]	3357	cat /boot/grub/device.map >> $LOGFILE
	3358	LogFile "-------------"
[3117]	3359	fi
[3643]	3360	if [ -r /boot/grub2/device.map ]; then
	3361	LogFile "-------------"
	3362	LogFile "INFO: /boot/grub2/device.map content"
	3363	LogFile "-------------"
	3364	cat /boot/grub2/device.map >> $LOGFILE
	3365	LogFile "-------------"
	3366	fi
[3117]	3367	if [ -r /etc/lilo.conf ]; then
	3368	LogFile "-------------"
	3369	LogFile "INFO: /etc/lilo.conf content"
	3370	LogFile "-------------"
	3371	cat /etc/lilo.conf >> $LOGFILE
	3372	fi
[3378]	3373	if [ -d /boot/efi ]; then
[3425]	3374	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3375	if [ _"$gcf" = _"" ]; then
[3425]	3376	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3377	else
	3378	LogFile "-------------"
	3379	LogFile "INFO: $gcf content"
	3380	LogFile "-------------"
	3381	cat $gcf >> $LOGFILE
	3382	LogFile "-------------"
	3383	fi
[3378]	3384	fi
	3385
[3146]	3386	LogFile "Full fdisk info"
	3387	LogFile "---------------"
	3388	$FDISK -l >> $LOGFILE
	3389	LogFile "----------------"
[3746]	3390	LogFile "MBRFILE = $MBRFILE"
	3391	LogFile "GPTMBRFILE = $GPTMBRFILE"
[747]	3392
[1723]	3393	# Compute libata version
[2649]	3394	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3395	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3396	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3397	if [ "$laver" = "2" ]; then
[1726]	3398	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3399	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3400	LogFile "-------------"
[1726]	3401	fi
[1723]	3402	fi
	3403
[2963]	3404	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3405	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3406	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3407	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3408	LogFile "WARNING: You have two options:"
	3409	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3410	LogFile "WARNING: - Disable the scanner during the backup"
	3411	fi
	3412
[1684]	3413	#
	3414	# If we have a USB device we need to store info
	3415	# and remove it from the parameters line
	3416	#
[747]	3417	if [ "$#" -ne "0" ] ; then
[1684]	3418	if [ "$1" = "--usb" ] ; then
	3419	shift
	3420	USBDEVICE=$1
	3421	if [ _"$USBDEVICE" = _"" ]; then
	3422	Die "No USB device specified"
	3423	fi
	3424	shift
	3425	fi
	3426	fi
	3427
	3428	if [ "$#" -ne "0" ] ; then
[747]	3429	if [ "$1" = "--findkernel" ] ; then
[2880]	3430	resk=`TryToFindKernelPath`
[1336]	3431	# Avoids logfile content for mondo
	3432	export MONDO_SHARE=""
[2880]	3433	if [ "$resk" = "" ] ; then
[2838]	3434	if [ $KERNEL_IS_XEN = "yes" ]; then
	3435	echo "$xenkernelpath"
[2963]	3436	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3437	MindiExit 0
[2838]	3438	else
[2860]	3439	MindiExit -1
[2838]	3440	fi
[747]	3441	else
[2880]	3442	echo "$resk"
[2963]	3443	LogFile "INFO: kernelpath = $resk"
[2860]	3444	MindiExit 0
[747]	3445	fi
[1720]	3446	elif [ "$1" = "--locatedeps" ] ; then
	3447	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3448	LocateDeps $*
[1720]	3449	# Avoids logfile content for mondo
	3450	export MONDO_SHARE=""
	3451	MindiExit $?
[1815]	3452	elif [ "$1" = "--readalllink" ] ; then
	3453	[ ! "$2" ] && Die "Please specify the binary to look at"
	3454	# Avoids logfile content for mondo
	3455	export MONDO_SHARE=""
[3231]	3456	mr-read-all-link $2
[1815]	3457	MindiExit $?
[3518]	3458	elif [ "$1" = "--makebcf" ] ; then
[3520]	3459	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3460	MakeBootConfFile $2
[3519]	3461	MindiExit 0
[2731]	3462	elif [ "$1" = "--makemessage" ] ; then
[2948]	3463	MakeMessageFile \| cut -c1-80
[2731]	3464	MindiExit 0
[747]	3465	elif [ "$1" = "--makemountlist" ] ; then
	3466	[ ! "$2" ] && Die "Please specify the output file"
	3467	MakeMountlist $2
[2432]	3468	CheckMountlist $2
[1336]	3469	# Avoids logfile content for mondo
	3470	export MONDO_SHARE=""
[925]	3471	MindiExit $?
	3472	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3473	echo "Mindi v$MINDI_VERSION"
[1336]	3474	# Avoids logfile content for mondo
	3475	export MONDO_SHARE=""
[925]	3476	MindiExit 0
[3585]	3477	elif [ "$1" = "--ironic" ] ; then
	3478	[ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
	3479	[ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
	3480	[ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
	3481	#TODO: See how we can influence the boot loader
	3482	[ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
	3483	if [ "$5" ]; then
	3484	boottype=$5
	3485	fi
	3486	[ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
	3487	if [ "$6" ]; then
	3488	bootbin=$6
	3489	fi
	3490	kernelpath=$2
	3491	BOOT_TYPE=$4
[3590]	3492	# Ironic requires some specific boot parameters
[3588]	3493	MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
	3494	MINDI_BOOT_TIMEOUT=10
[3590]	3495	EXTRA_SPACE=1500000
	3496	# Get the local improvements to the configuration
[3589]	3497	if [ -f $MINDI_CONFIG ]; then
	3498	. $MINDI_CONFIG
	3499	fi
[3585]	3500	PrepareBootDir
[3692]	3501	PrepareBigDirTar
	3502	CleanBigDir
[3585]	3503	cp $3 $MINDI_TMP/initrd.img
	3504	MakeBootableDevice ISO
	3505	MindiExit 0
[747]	3506	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3507	MONDO_TMP=$2
[3661]	3508	# Change MINDI_TMP for the one provided by mondo
[940]	3509	# So that it can get back the built files
[2153]	3510	if [ _"$MONDO_TMP" = _"" ]; then
	3511	Die "MONDO_TMP is empty, aborting"
	3512	fi
	3513	if [ _"$MONDO_TMP" = _"/" ]; then
	3514	Die "MONDO_TMP is /, aborting"
	3515	fi
[2092]	3516	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3517	rmdir $MINDI_TMP
[1486]	3518	export MINDI_TMP=$MONDO_TMP
[953]	3519	mkdir -p $MINDI_TMP
[2238]	3520
[1696]	3521	# This is the scratch dir in mondo - subdir images
[1880]	3522	MINDI_CACHE=$3
[3388]	3523	LogFile "MINDI_CACHE = $MINDI_CACHE"
[3709]	3524	LogFile "MINDI_TMP = $MINDI_TMP"
[2238]	3525
[925]	3526	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3527	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3528
[747]	3529	###
	3530	### Sq-Modification...
	3531	### Attempt to locate kernel specific module path
	3532	### if module path is found then use it other wise use uname -r to set it...
	3533	###
[2629]	3534	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3535	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3536	fi
[2657]	3537	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3538	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3539	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3540	LogAll " using running kernel\'s modules."
[2292]	3541	kernelname=$KERVERRUN
[3149]	3542	else
[3426]	3543	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3544	fi
[3149]	3545	LogAll "INFO: kernelname = $kernelname"
	3546	LogAll "INFO: kernelpath = $kernelpath"
[747]	3547	###
	3548	### end of Sq-Modification
	3549	###
[925]	3550	TAPEDEV=$5
	3551	TAPESIZE=$6
	3552	FILES_IN_FILELIST=$7
	3553	USE_LZO=$8
	3554	CDRECOVERY=$9
[747]	3555	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3556	IMAGE_DEVS=""
	3557	else
	3558	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3559	fi
[925]	3560	if [ "${11}" ] ; then
	3561	LILO_OPTIONS=""
[3149]	3562	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3563	fi
	3564	LAST_FILELIST_NUMBER=${12}
[747]	3565	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3566	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3567	USE_COMP="${15}"
	3568	USE_LILO="${16}"
[925]	3569	USE_STAR="${17}"
	3570	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3571	DIFFERENTIAL="${19}"
[998]	3572	USE_GZIP="${20}"
[3353]	3573	USE_LZMA="${21}"
	3574	NOT_BOOT="${22}"
[3397]	3575	BOOT_TYPE="${23}"
[747]	3576	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3577	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3578	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[747]	3579	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[3565]	3580	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3581	# MONDO_ROOT is the real scratchdir
[1880]	3582	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3583	if [ _"$MONDO_ROOT" != _"" ]; then
	3584	mkdir -p $MONDO_ROOT
	3585	else
	3586	Die "MONDO_ROOT is undefined"
	3587	fi
[747]	3588	else
[3585]	3589	LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
	3590	LogScreen " mindi --ironic kernel initrd [BIOS\|UEFI] [syslinux\|grub\|grub2] [/path/to/bootloader]"
	3591	LogScreen " mindi --locatedeps file"
	3592	LogScreen " mindi --makemessage"
[3586]	3593	LogScreen " mindi --findkernel"
[3585]	3594	LogScreen " mindi --makemountlist file"
	3595	LogScreen " mindi --makebcf bootloader"
	3596	LogScreen " mindi -V"
[925]	3597	MindiExit -1
[747]	3598	fi
	3599	fi
[2238]	3600
	3601	if [ _"$MINDI_CACHE" != _"" ]; then
	3602	rm -rf $MINDI_CACHE/* 2> /dev/null
	3603	mkdir -p $MINDI_CACHE
	3604	fi
	3605
[747]	3606	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3607
[1684]	3608	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3609	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3610	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3611	LogAll "BusyBox sources are available from http://www.busybox.net"
	3612	LogAll "------------------------------------------------------------------------------"
[747]	3613	else
[3426]	3614	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3615	fi
[3231]	3616	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3617	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3618	else
[3565]	3619	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3620	MindiExit -1
	3621	fi
[747]	3622
	3623	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3624	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3625	if [ $? -eq 0 ]; then
	3626	modprobe $i 2>&1 > /dev/null
	3627	fi
[747]	3628	done
	3629
[2963]	3630	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3631	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3632	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3633	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3565]	3634	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
[3278]	3635	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3636	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3637	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3638	mkdir -p $MINDI_TMP/small-all/tmp
[3565]	3639	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
	3640	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
[747]	3641	sleep 2
[3565]	3642	LogAll "Done. Exiting."
[925]	3643	MindiExit 0
[747]	3644	fi
	3645
[1690]	3646	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3647	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3648	fi
	3649
[747]	3650	if [ "$kernelpath" = "" ] ; then
[1335]	3651	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3652	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3653	read ch
	3654	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
[3651]	3655	USE_OWN_KERNEL="yes"
[1809]	3656	else
	3657	USE_OWN_KERNEL="no"
[747]	3658	fi
	3659	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3660	kernelpath=`TryToFindKernelPath`
	3661	if [ "$kernelpath" = "" ] ; then
	3662	echo -n "Please enter kernel path : "
	3663	read kernelpath
	3664	fi
[747]	3665	fi
	3666	fi
[3231]	3667
[1880]	3668	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3669	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3670
[3692]	3671	PrepareBigDir
	3672	bigdir_size=`du -sk $bigdir \| cut -f1`
	3673	LogFile "---------------------------"
	3674	LogFile "INFO: bigdir size is $bigdir_size KB"
[1983]	3675
[3692]	3676	PrepareTargetDir \|\| Die "Could not create initrd.img in target dir"
	3677	targetdir_size=`du -sk $targetdir \| cut -f1`
	3678	LogFile "---------------------------"
	3679	LogFile "INFO: targetdir size is $targetdir_size KB"
	3680	LogFile "---------------------------- "
[3522]	3681
[3692]	3682	# Now we can compute it correctly with some extra in case of...
	3683	export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
	3684	# And now we can patch the value in conf files
	3685	PatchBootFiles
	3686	# And tar them
	3687	PrepareBigDirTar
	3688	# And prepare boot setup
	3689	MakeBootInitFile
	3690	# Now cleans up stuff
	3691	CleanBigDir
	3692	CleanTargetDir
	3693
[747]	3694	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
[3653]	3695	...Or type 'memtest' to test your machine's RAM thoroughly.\n"
[747]	3696
[1684]	3697	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3698	OfferToMakeBootableISO
[1684]	3699	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3700	OfferToMakeBootableUSB
[1684]	3701	fi
[3522]	3702	LogAll "INFO: Mindi Finished"
[747]	3703	elif [ "$TAPEDEV" ] ; then
[2078]	3704	if [ "$ARCH" != "ia64" ] ; then
	3705	# We need to keep the img file as boot file for ia64 platform
	3706	rm -f $MINDI_CACHE/{img,iso}
	3707	else
	3708	rm -f $MINDI_CACHE/*iso
	3709	fi
[1898]	3710	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3711	OfferToMakeBootableUSB
[1898]	3712	fi
[1983]	3713	OfferToMakeBootableISO
[1880]	3714	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3715	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3716	else
[925]	3717	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3718	fi
[1695]	3719	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3720	OfferToMakeBootableUSB
[747]	3721	else
[1983]	3722	OfferToMakeBootableISO
[747]	3723	fi
[3391]	3724
[3396]	3725	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3726	LogFile "INFO: Your $MRCFG file is:"
	3727	LogFile "--------------------------"
	3728	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3729	LogFile "--------------------------"
[3391]	3730	else
[3421]	3731	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3732	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3733	fi
[3391]	3734	fi
[747]	3735	# cleanup
[925]	3736	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: