source: MondoRescue/branches/2.2.8/mindi/mindi @ 2056

Last change on this file since 2056 was 2056, checked in by Bruno Cornec, 12 years ago

Use option -s of syslinux in case in improve stuff (still potential pb of FAT32)

  • Property svn:keywords set to Rev Id
File size: 100.8 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 2056 2008-10-27 10:35:03Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17
18ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20MINDI_REV=PBREV
21MINDI_VER=PBVER
22
23MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
24MINDI_PREFIX=XXX
25MINDI_CONF=YYY
26MINDI_SBIN=${MINDI_PREFIX}/sbin
27MINDI_LIB=LLL
28
29# Temporary directory for mindi
30TMPDIR=/tmp
31
32EXTRA_SPACE=49152       # increase if you run out of ramdisk space
33BOOT_SIZE=16384         # size of the boot disk
34
35PROMPT_MAKE_CD_IMAGE="yes"
36    # Ask if you want to make a CD Image to be written?
37    # if this is set to 'no', then the image will be created automatically
38
39PROMPT_MAKE_USB_IMAGE="yes"
40    # Ask if you want to make a USB Image to be written?
41    # if this is set to 'no', then the image will be created automatically
42
43USE_OWN_KERNEL="yes"
44    # If set to "no", you will be prompted for whether or not
45    # you want to use your own kernel, or the supplied default.
46    # If "yes" mindi will automatically use your own kernel.
47
48MY_FSTAB=/etc/fstab
49TAPE_MODS="ht st osst ide-tape ide_tape"
50SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
51
52# ide-probe-mod
53IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core edd paride ata_generic ata_piix libata dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks pata_sis amd74xx sis5513"
54PCMCIA_MODS="pcmcia_core ds yenta_socket"
55USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
56NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet exportfs"
57CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660"
58# Those modules will only go on the backup media, not the boot media.
59EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm_multipath dm-round-robin dm_round_robin jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
60# Replace with that line for HP OCMP e.g.
61#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
62DENY_MODS="kqemu"
63# Force some modules to be included
64FORCE_MODS=""
65
66LOGFILE=/var/log/mindi.log
67MINDI_CACHE=/var/cache/mindi
68BOOT_MEDIA_MESSAGE="\
69To format and restore all files automatically, type 'nuke' <enter>.\n\
70To restore some/all files interactively, type 'interactive' <enter>.\n\
71To compare the archives with your filesystem, type 'compare' <enter>.\n\
72To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
73You may add one or more of the following parameters as well:-\n\n\
74        donteject - mondorestore will not eject the CD; this is useful if, for\n\
75                    instance, your PC's case has a concealed CD-ROM drive\n\
76        noresize  - your mountlist will not be adjusted to use your unallocated\n\
77                    hard disk space\n\
78        textonly  - do not call any Newt library routines; this is unattractive\n\
79                    but valuable if you find your Newt library has bugs in it\n\n\
80e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
81a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
82"
83FDISK=$MINDI_SBIN/parted2fdisk
84
85# Using a config file allow to overwrite some values
86MINDI_CONFIG="$MINDI_CONF/mindi.conf"
87if [ -f $MINDI_CONFIG ]; then
88    . $MINDI_CONFIG
89fi
90DEPLIST_FILE="$MINDI_CONF/deplist.txt"
91ISO_CMD="/usr/bin/mkisofs"
92ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
93
94# Now we can create what we need
95export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
96
97# ----------------------------------------------------------------------------
98
99
100AbortHere() {
101    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
102    Die "Program is terminating in response to signal received from OS/user"
103}
104
105
106Aborted() {
107    trap SIGHUP SIGTERM SIGTRAP SIGINT
108    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
109    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
110    Die "User abort."
111}
112
113
114AddFileToCfgIfExists() {
115    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
116}
117
118
119AddKeyboardMappingFile() {
120    local mappath r included_list included_item i res ii sss
121    mappath=$1
122    KBDEPTH=$(($KBDEPTH+1))
123    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
124    if [ -e "$bigdir/$mappath" ] ; then
125        echo "$mappath already added" >> $LOGFILE
126        return
127    elif [ -d "$bigdir/$mappath" ] ; then
128        echo "Cannot add $mappath: it's a directory. Sorry."
129        return
130    fi
131    echo "Added kbd map $mappath" >> $LOGFILE
132    if [ ! -e "$mappath" ] ; then
133            mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
134        if [ ! -e "$mappath" ] ; then
135            LogIt "Cannot add $mappath: kbd map file not found"
136            return
137        fi
138    else
139        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
140    fi
141
142    mkdir -p $bigdir/etc
143    tar cf - $mappath 2>> /dev/null | (cd $bigdir ; tar xf -) || LogIt "AKMF -- Could not copy $mappath to $bigdir"
144    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
145        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
146    else
147        included_list=`grep -Fi include $mappath | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
148    fi
149    for included_item in $included_list ; do
150        if [ ! -e "$included_item" ] ; then
151                sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
152            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
153            for ii in $sss ; do
154                [ -e "$ii" ] && AddKeyboardMappingFile $ii
155            done
156        else
157            AddKeyboardMappingFile $included_item
158        fi
159    done
160}
161
162
163CopyDependenciesToDirectory() {
164    local outdir incoming fname counter d found
165    outdir=$1
166    mkdir -p $outdir
167    incoming=`ReadLine`
168    counter=0
169    while [ "$incoming" != "" ] ; do
170        # Non absolute file names should not arrive till here => skipped
171        if [ `echo "$incoming" | cut -c1` != '/' ]; then
172            LogIt "Unable to handle $incoming"
173            incoming=`ReadLine`
174            continue
175        fi
176        # no parent directory of incoming should be a link, copy is not possible in that case
177        d=`dirname "$incoming"`
178        found="false"
179        while [ $d != "/" -a $found = "false" ]; do
180            [ -h "$d" ] && found="true"
181            d=`dirname "$d"`
182        done
183        if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
184            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
185        elif [ -e "$incoming" ] && [ $found = "false" ]; then
186            tar cf - $incoming 2> /dev/null | (cd $outdir ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
187
188            # Only uncompress modules if not using udevd
189            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
190                gunzip -f $outdir/$incoming || LogIt "Cannot gunzip $outdir/$incoming"
191            fi
192            [ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
193            counter=$(($counter+1))
194            if [ "$counter" -ge "5" ] ; then
195                counter=0
196                echo -en "."
197            fi
198        fi
199        incoming=`ReadLine`
200    done
201}
202
203
204CountItemsIn() {
205    local r
206    r=0
207    for q in $1 ; do
208        r=$(($r+1))
209    done
210    echo $r
211}
212
213
214# Last function called before exiting
215# Parameter is exit code value
216MindiExit() {
217    local my_partitions
218
219    echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
220    echo "End date : `date`" >> $LOGFILE
221    if [ _"$MONDO_SHARE" != _"" ] ; then
222        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
223        cat $LOGFILE >> /var/log/mondoarchive.log
224        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
225    fi
226
227    cd /
228    sync&
229
230    # Unmount what could remain mounted
231    my_partitions=`mount | grep -F $$ | cut -f1 -d' '`
232    [ "$my_partitions" != "" ] && umount $my_partitions
233    # Clean temporary files only when standalone mindi
234    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
235        rm -Rf $MINDI_TMP
236    fi
237    exit $1
238}
239
240Die() {
241    local i
242    if [ "$1" = "" ] ; then
243        LogIt "FATAL ERROR"
244    else
245        LogIt "FATAL ERROR. $1"
246    fi
247
248    LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
249    LogIt "See http://www.mondorescue.org for more information."
250    LogIt "WE CANNOT HELP unless you enclose that file.\n"
251    MindiExit -1
252}
253
254
255DropOptimizedLibraries() {
256    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
257    filelist=$1
258    outdir=$2
259
260    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
261    if [ "$list_of_optimized_libraries" = "" ] ; then
262        return 0
263    fi
264    echo -en "Dropping i686-optimized libraries if appropriate"
265    for optimized_lib_name in $list_of_optimized_libraries ; do
266        echo -en "."
267        reason=""
268        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
269        echo "$vanilla_lib_name" >> $filelist
270        resolved=$vanilla_lib_name
271        echo "Adding $resolved to filelist" >> $LOGFILE
272        resolved=`ReadAllLink $resolved`
273        echo "Adding $resolved to filelist" >> $LOGFILE
274        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
275        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
276        ln -sf $vanilla_lib_name $outdir$optimized_lib_name
277        echo "Excluding $optimized_lib_name" >> $LOGFILE
278        grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
279        echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
280        echo "$vanilla_lib_name" >> $filelist.tmp
281        mv -f $filelist.tmp $filelist
282    done
283    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
284    mv -f $filelist.tmp $filelist
285    echo -e "$DONE"
286}
287
288
289FindAndAddUserKeyboardMappingFile() {
290    local r res mapfile mappath included_item included_list keyfile mp locale
291    LogIt "Analyzing your keyboard's configuration."
292    KEYDIR=/lib/kbd
293    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
294    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
295    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
296    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
297    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
298    if [ ! -e "$KEYDIR" ] ; then
299        LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
300        return 0
301    fi
302    if [ -e "/etc/sysconfig/keyboard" ] ; then
303        echo "Red Hat-style config detected." >> $LOGFILE
304        keyfile=/etc/sysconfig/keyboard
305    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
306        echo "Slackware-style config detected." >> $LOGFILE
307        keyfile=/etc/rc.d/rc.keymap
308    elif [ -e "/etc/rc.config" ] ; then
309        echo "Debian-style config detected." >> $LOGFILE
310        keyfile=/etc/rc.config
311    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
312        echo "Debian-style config detected." >> $LOGFILE
313        echo -en "Adding the following keyboard mapping tables: "
314        mkdir -p $bigdir/tmp
315        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
316        KBDEPTH=0
317        mkdir -p $bigdir/etc/console
318        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
319        echo -e "$DONE"
320        return 0
321    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
322        echo "Ubuntu-style config detected." >> $LOGFILE
323        echo -en "Adding the following keyboard mapping tables: "
324        mkdir -p $bigdir/tmp
325        echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
326        KBDEPTH=0
327        mkdir -p $bigdir/etc/console-setup
328        cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
329        echo -e "$DONE"
330        return 0
331    elif [ -e "/etc/conf.d/keymaps" ] ; then
332        echo "Gentoo-style config detected." >> $LOGFILE
333        keyfile=/etc/conf.d/keymaps
334    else
335        echo -en "Searching for rc.config ..."
336        keyfile=`find /etc -name rc.config | head -n1`
337        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
338            LogIt "Unknown config detected. Default keyboard map will be used."
339            return
340        else
341            echo "Found $keyfile" >> $LOGFILE
342        fi
343    fi
344    if [ ! -e "$KEYDIR/keymaps" ] ; then
345        LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
346        return
347    fi
348    echo "keyfile=$keyfile" >> $LOGFILE
349    locale=`grep -F KEYTABLE "$keyfile" | tr -d '"' |cut -d'=' -f2`
350    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
351    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | tr -d '"' |cut -d'=' -f2`        # Gentoo
352    echo "locale=$locale" >> $LOGFILE
353    #
354    # Process the keymaps dir once for all
355    # AddKeyboardMappingFile will use it recursively
356    #
357    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
358    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
359    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
360    # If we have multiple keymaps then log it !!
361    echo "$mp" | grep -q " "
362    if [ $? -eq 0 ]; then
363        echo "WARNING: Multiple keymaps found: $mp" | tee -a $LOGFILE
364        echo "The following one will be used" >> $LOGFILE
365    fi
366    for i in $mp ; do
367        mappath=$i
368        [ -e "$i" ] && [ ! -d "$i" ] && break
369    done
370    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
371            mappath=$(find / -name "*/kbd/keymaps/*/$locale")
372    fi
373    echo "mappath = $mappath" >> $LOGFILE
374    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
375        LogIt "Keyboard mapping file not found. Default keyboard map will be used."
376        return
377    fi
378    echo -en "Adding the following keyboard mapping tables: "
379    mkdir -p $bigdir/tmp
380    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
381    KBDEPTH=0
382    AddKeyboardMappingFile $mappath
383    echo -e "$DONE"
384    rm -f $MINDI_TMP/keymaps.find
385    return 0
386}
387
388
389FindIsolinuxBinary() {
390    ISOLINUX=/usr/lib/isolinux.bin
391    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
392    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
393    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
394    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
395    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
396    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
397    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
398    echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
399}
400
401
402FindSpecificModuleInPath() {
403    local modpaths pwd line
404    pwd=`pwd`
405    if [ "$YOUR_KERNEL_SUCKS" ] ; then
406        cd $MINDI_TMP
407    else
408        cd /
409    fi
410    if [ ! -e "$1" ] ; then
411        LogIt "WARNING - cannot search specific path '$1'"
412        return 1
413    fi
414    modpaths=`find $1 -name $2.*o -type f`
415    #[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
416    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
417    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
418    [ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
419    echo "$modpaths"
420    cd $pwd
421}
422
423
424GenerateGiantDependencyList() {
425    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
426
427    echo -en "Analyzing dependency requirements"
428    outfile=$1
429    tempfile=$MINDI_TMP/$$.txt
430    incoming=`ReadLine`
431
432    > $tempfile
433    progress=0
434    res=0
435    noof_lines=$2
436    while [ "$incoming" != "" ] ; do
437        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
438            incoming=`ReadLine`
439            continue
440        fi
441        if [ "$incoming" = "LVMFILES:" ] ; then
442            break
443        fi
444        filelist=`GenerateListForFile "$incoming"`
445        r=$?
446        [ "$r" -ne "0" ] && LogIt "$incoming not found"
447        res=$(($res+$r))
448#       echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
449        for fname in $filelist ; do
450            [ "$fname" != "" ] && echo "$fname" >> $tempfile
451        done
452        progress=$(($progress+1))
453        echo -en "\r\t\t\t\t\t\t\t\t"
454        i=$(($progress*100))
455        i=$(($i/$noof_lines))
456        echo -en "$i"
457        echo -en "%"
458        modres=$(($progress%4))
459        [ "$modres" -eq "0" ] && echo -en "\t/"
460        [ "$modres" -eq "1" ] && echo -en "\t-"
461        [ "$modres" -eq "2" ] && echo -en "\t\\"
462        [ "$modres" -eq "3" ] && echo -en "\t|"
463        incoming=`ReadLine`
464    done
465    if  [ "$incoming" = "LVMFILES:" ] ; then
466        incoming=`ReadLine`
467        lvmversion=""
468        while [ "$incoming" != "" ] ; do
469            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
470                incoming=`ReadLine`
471                continue
472            fi
473            filelist=`GenerateListForFile "$incoming"`
474            for tool in $filelist ; do
475                lvmresolved=`readlink -f $tool`
476                if [ "$tool" = "$lvmresolved" ]; then
477                    echo "$tool" >> $tempfile
478                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
479                    if [ "$lvmversion" = "" ] ; then
480                        lvmversion=`$lvmresolved`
481                        echo "$lvmresolved" >> $tempfile
482                    fi
483                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
484                    if [ "$lvmversion" = "200" ]; then
485                        # pvdata and lvmcreate_initrd don't exist in LVM2
486                        case "$toolstripped" in
487                        "pvdata")
488                            continue
489                            ;;
490                        "lvmcreate_initrd")
491                            continue
492                            ;;
493                        esac
494                    fi
495                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
496                    if [ -e "$toolpath" ] ; then
497                        echo "$toolpath" >> $tempfile
498                        echo "$tool" >> $tempfile
499                    else
500                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
501                    fi
502                    if [ -e "$toolpath" ] ; then
503                        echo "$toolpath" >> $tempfile
504                        echo "$tool" >> $tempfile
505                    else
506                        echo "Where are your LVM-Tools? Couldn't find $tool"
507                    fi
508                else
509                    echo "$tool" >> $tempfile
510                fi
511            done
512            progress=$(($progress+1))
513            echo -en "\r\t\t\t\t\t\t\t\t"
514            i=$(($progress*100))
515            i=$(($i/$noof_lines))
516            echo -en "$i"
517            echo -en "%"
518            modres=$(($progress%4))
519            [ "$modres" -eq "0" ] && echo -en "\t/"
520            [ "$modres" -eq "1" ] && echo -en "\t-"
521            [ "$modres" -eq "2" ] && echo -en "\t\\"
522            [ "$modres" -eq "3" ] && echo -en "\t|"
523            incoming=`ReadLine`
524        done
525    fi
526    echo -en "$DONE\nMaking complete dependency list"
527
528    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
529    mv -f $tempfile.new $tempfile
530    > $outfile.pre
531    progress=0
532    noof_lines=`cat $tempfile | wc -l`
533    echo "---------------------------------" >> $LOGFILE
534    echo "List of dependencies:             " >> $LOGFILE
535    echo "---------------------------------" >> $LOGFILE
536    for fname in `cat $tempfile` ; do
537        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
538        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
539        progress=$(($progress+1))
540        echo -en "\r\t\t\t\t\t\t\t\t"
541        i=$(($progress*100))
542        i=$(($i/$noof_lines))
543        echo -en "$i"
544        echo -en "%"
545        modres=$(($progress%4))
546        [ "$modres" -eq "0" ] && echo -en "\t/"
547        [ "$modres" -eq "1" ] && echo -en "\t-"
548        [ "$modres" -eq "2" ] && echo -en "\t\\"
549        [ "$modres" -eq "3" ] && echo -en "\t|"
550    done
551    if [ _"$MONDO_SHARE" != _"" ]; then
552        mkdir -p $bigdir/tmp
553        mkdir -p $bigdir/sbin
554        mkdir -p $bigdir/bin
555        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
556            LogIt "\nIncorporating post-nuke tarball"
557            old_pwd=`pwd`
558            cd $bigdir
559            tar -zxf $MINDI_TMP/post-nuke.tgz || LogIt "Error occurred when untarring post-nuke tarball"
560            cd $old_pwd
561        fi
562        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
563            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
564        else
565            LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
566            LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
567            LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
568            Die "Odd."
569        fi
570        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null || LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
571        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
572            LogIt "\nIncorporating NFS-related settings"
573            for r in NFS-* ISO-PREFIX ; do
574                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
575                echo "Copying $r to ramdisk" >> $LOGFILE
576            done
577        fi
578    fi
579    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
580    rm -f $tempfile $outfile.pre
581    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
582    return $res
583}
584
585
586GenerateListForFile() {
587    local files_found loc fname incoming i res
588    incoming="$1"
589    files_found=""
590    res=0
591
592    for fname in $incoming ; do
593        files_found="$files_found `LocateFile $fname`"
594    done
595
596    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
597}
598
599
600# Returns all disk devices which are part of a raid array
601GetAllRaidMembers() {
602    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
603}
604
605
606GetFileSizeList() {
607    local i
608    for i in `find $1 -type d -o -print` ; do
609        du -sk $i
610    done
611}
612
613
614GetHomeDir() {
615    local res loc
616    loc=`which $1 2>/dev/null`
617    res=`file $loc | $AWK '{print $NF;}'`
618    dirname $res
619}
620
621
622# Check kernel filesystem capabilites for accessing initrd image
623#
624# Interface definition:
625# param #1: absolute path to kernel image
626GetInitrdFilesystemToUse() {
627
628    # interface test: make sure we have one parameter
629    if [ $# -ne 1 ]; then
630        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
631    fi
632
633    # interface parameters
634    local lvKernelImage=$1
635
636    # local constants (filesystem magic strings)
637    local lcMagicCramfs="<3>cramfs: wrong magic"
638    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
639    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs..."
640
641    # local variables
642    local lvOffset
643    local lvScanRes
644    local lvUseFilesystem
645
646    # say where we are.
647    echo "  GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
648
649    # verify that file exists
650    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
651
652    # Kernel may be gzip compressed
653    file $lvKernelImage 2>&1 | grep -q gzip
654    if [ $? -eq 0 ]; then
655        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
656    else
657        # get offet of gzip magic "1f8b0800" in file
658        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}'`
659        [ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
660        lvOffset=`expr $lvOffset / 2`
661        echo "  GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
662
663        # scan kernel image for initrd filessystem support
664        lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicInitfs"`
665    fi
666
667    # determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
668    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
669        lvUseFilesystem="ext2fs"
670    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
671        lvUseFilesystem="initramfs"
672    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
673        lvUseFilesystem="cramfs"
674    else
675        lvUseFilesystem="UNSUPPORTED"
676    fi
677
678    # say what we are using
679    echo "  GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
680
681    # return file system to use
682    echo "$lvUseFilesystem"
683
684}
685
686# Searches parent raid device of given disk device
687# $1: disk device (i.e. /dev/hda1)
688GetParentRaidDev() {
689    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
690}
691
692
693# Searches members of raid device
694# $1: raid device (/dev/md...)
695GetRaidDevMembers() {
696    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
697}
698
699
700HackPathsToFailsafe() {
701    local incoming newpath kver stub i pwd
702    kver=`uname -r`
703    incoming=`ReadLine`
704    pwd=`pwd`
705    cd $MINDI_TMP
706    while [ "$incoming" != "" ] ; do
707        stub=`basename $incoming`
708        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
709        for i in $newpath ; do
710            echo "$i"
711        done
712        read incoming
713    done
714    cd $pwd
715}
716
717
718ListAllPartitions() {
719    local res currline partition all_partitions ap_orig remaining i j
720
721    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/fdd|cdr|zip|floppy/ {print $1}'
722    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
723    if [ -e "/vmfs/volumes" ]; then
724        # For VMWare ESX 3 get the device names of these volumes
725        vdf -P | grep -E '/vmfs/volumes' | awk '{print $1}'
726    fi
727    return
728}
729
730
731ListImagesForUser() {
732    local path fname
733    path=$MINDI_CACHE
734    echo -en "In the directory '$path' you will find the images:-\n"
735    for fname in `ls $path | grep -F mindi-` ; do
736        printf "%19s " $fname
737    done
738    echo " "
739}
740
741
742ListKernelModulePaths() {
743    local module_list module fname oss r kern
744    oss="/root/oss/modules"
745    module_list="$MODULES"
746    # Remove unwanted modules from list
747    for i in $DENY_MODS; do
748        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
749        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
750    done
751###
752### Sq-Modification ... Use kernelname for module search path if specified
753###
754    # kern="`uname -r`"
755    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
756    then
757        kern=${kernelname}
758    else
759        kern="`uname -r`"
760    fi
761###
762### Sq-Mod End
763###
764    for module in $module_list $EXTRA_MODS ; do
765        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
766        echo "module $module --> $r" >> $LOGFILE
767        [ "$r" ] && echo "$r"
768        [ -f "$oss" ] && find $oss | grep -F $module
769    done
770    find /lib/modules/$kern/modules.* -type f 2> /dev/null
771    [ -f "$oss" ] && find $oss.* 2> /dev/null
772}
773
774#
775# Critical function which computes all dependencies (dyn. lib.)
776# for a list of binaries
777#
778LocateDeps() {
779    local incoming fname deps
780    incoming="$*"
781    for fname in $incoming ; do
782        if [ ! -e "$fname" ] ; then
783            echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
784            if echo $fname | grep lvm &> /dev/null ; then
785                echo "This warning only affects you if you are using LVM." >> $LOGFILE
786                if echo "$MODULES" | grep lvm &> /dev/null ; then
787                    echo "I think you are, so please take heed!" >> $LOGFILE
788                else
789                    echo "I don't think you are, so don't worry about it." >> $LOGFILE
790                fi
791            fi
792        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
793            echo "$fname is softlink" >> $LOGFILE
794        else
795            ldd $fname 2> /dev/null | ProcessLDD
796        fi
797    done
798}
799
800
801# Give all symlinks recursively of a full path name
802ReadAllLink() {
803    file="$1"
804
805    echo "$file"
806    if [ ! -h $file ]; then
807        return 0
808    fi
809
810    link=`readlink $file`
811    d=`dirname $file`
812    fchar=`echo $link | cut -c1`
813    # If mother dir is a link print it
814    if [ -h "$d" ]; then
815        echo "$d"
816        d=`readlink $d`
817    fi
818    if [ "$fchar" != "/" ]; then
819        # Relative or local link
820        ReadAllLink "$d/$link" 
821    else
822        # Absolute path
823        ReadAllLink $link 
824    fi
825}
826
827
828LocateFile() {
829    local i path fname_to_find location output resolved tmp stub cache_id loclist
830    fname_to_find="$1"
831    # It's an absolute path
832    if echo "$fname_to_find" | grep -x "/.*" ; then
833        output="$fname_to_find"
834        if [ -h "$output" ] ; then
835            output="`ReadAllLink $output` $output"
836        fi
837        echo "$output"
838        return 0
839    fi
840    # It's not an absolute path
841    output=""
842    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
843    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
844        [ -h "$path" ] && continue
845        [ ! -e "$path/$fname_to_find" ] && continue
846        output="$path/$fname_to_find $output"
847        if [ -h "$path/$fname_to_find" ] ; then
848            output="`ReadAllLink $path/$fname_to_find` $output"
849        fi
850    done
851    if [ "$output" = "" ] ; then
852        return 1
853    fi
854    echo "$output"
855    return 0
856}
857
858
859LogIt() {
860    if [ -e /dev/stderr ] ; then
861        echo -e "$1" >> /dev/stderr
862    elif [ -e /usr/bin/logger ] ; then
863        /usr/bin/logger -s $1
864    fi
865    echo -e "$1" >> $LOGFILE
866}
867
868
869# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
870MakeMondoConfigFile() {
871    local outfile use_lzo use_comp use_star
872    outfile=$1
873    > $outfile
874    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
875    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
876    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
877    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
878    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
879    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
880    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
881    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
882    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
883    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
884    echo "use-lzo $use_lzo" >> $outfile
885    echo "use-gzip $use_gzip" >> $outfile
886    echo "use-star $use_star" >> $outfile
887    echo "use-comp $use_comp" >> $outfile
888    echo "datestamp `date`" >> $outfile
889    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
890    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
891    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
892    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
893    AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW  nfs-client-defgw  $outfile
894    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT  nfs-server-mount  $outfile
895    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH   nfs-server-path   $outfile
896    AddFileToCfgIfExists $MINDI_TMP/NFS-DEV           nfs-dev           $outfile
897    AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
898    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
899    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
900    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
901    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
902    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
903    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
904    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
905    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
906    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
907    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
908    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
909    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
910    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
911}
912
913
914MakeMountlist() {
915    local scratchdir mountlist all_partitions current_partition \
916partition_size partition_format outstring partition_number \
917partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
918absolute_partition old_partition_fmt current_lvolume uname skip
919
920    echo "Your raw fstab file looks like this:" >> $LOGFILE
921    echo "------------------------------------" >> $LOGFILE
922    cat $MY_FSTAB >> $LOGFILE
923    echo "Your mountlist will look like this:" | tee -a $LOGFILE
924    echo "-----------------------------------" >> $LOGFILE
925
926# scratchdir, mountlist(OUT)
927    scratchdir=$MINDI_TMP
928    mountlist=$1
929
930# NB: partition = device
931# NB: mountpt = where the device is mounted
932
933    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
934
935    [ "$mountlist" != "" ] && rm -Rf $mountlist
936    > $mountlist
937    all_partitions=""
938   
939    if [ $LVM != "false" ]; then
940        echo -en "Analyzing LVM...\n"
941        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
942        if [ $? -ne 0 ]; then
943            LVM="false"
944        fi
945        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-32`
946    fi
947    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
948#    echo "all partitions = $all_partitions" > /dev/stderr
949    for i in $IMAGE_DEVS ; do
950        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
951    done
952    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
953    printf "        %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID | tee -a $LOGFILE
954    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
955    for c_p in $all_partitions ; do
956        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] && continue
957        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
958        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
959            current_partition=`readlink -f $c_p`
960            [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
961            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
962        else
963            current_partition="$c_p"
964        fi
965        [ "$c_p" = "none" ] && continue
966        redhat_label=""
967        label=""
968        uuid=""
969        absolute_partition=`readlink -f $c_p`
970        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
971
972        # Detects noauto partitions not mounted and exclude them
973        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
974        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
975            continue
976        fi
977
978        # set default in case we dont't find it
979        str_to_find_fmt_with=$current_partition
980
981        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
982        # current_partition contains only first column of /etc/fstab
983        if [ "`echo "$current_partition" | /bin/grep -i "LABEL="`" != "" ]; then
984            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
985            actual_dev=""
986
987            # 1st try, findfs - the RHEL way of finding labels and their partitions
988            if [ -x "/sbin/findfs" ]; then
989                actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
990            fi
991   
992            # 2nd try : blkid, the good way for all LABEL except swap
993            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
994                actual_dev=`/sbin/blkid | /bin/grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
995                # For LVM FS it will give a /dev/dm-# which should then be converted
996                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
997                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
998                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
999                    for dev in `ls /dev/mapper/*`; do
1000                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1001                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1002                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1003                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1004                            break
1005                        fi
1006                    done
1007                fi
1008            fi
1009   
1010            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1011            # For LVM gives a /dev/mapper entry
1012            if [ "x$actual_dev" = "x" ]; then
1013                actual_dev=`/bin/mount -l | /bin/grep "\[$redhat_label\]" | cut -d' ' -f1`
1014            fi
1015   
1016            # 4th try, with vol_id
1017            # SWAP only
1018            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1019                list_swaps=`cat /proc/swaps | /bin/grep "/dev/" | $AWK '{ print $1 }' `
1020                for dev_swap in $list_swaps ; do
1021                    dev_exists=`/sbin/vol_id $dev_swap | /bin/grep "$redhat_label"`
1022                    if [ "x$dev_exists" != "x" ]; then
1023                        actual_dev=$dev_swap
1024                        break;
1025                    fi
1026                done
1027            fi
1028
1029            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1030            # LABEL=SW-cciss/c0d0p3 (RDP)
1031            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1032            # SWAP only
1033            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | /bin/grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1034                    skip=""
1035                    uname="`uname -r`"
1036                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1037                    # 2.6.12 needs 16 (FC3)
1038                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1039                    # 2.6.19 and upper needs 1052
1040                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1041                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1042                    if [ $skip = "" ]; then
1043                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1044                    fi
1045                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1046                    do
1047                        # Location of the swap label for kernel 2.6
1048                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1049                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1050                            actual_dev=$try_dev
1051                        fi
1052                    done
1053            fi
1054
1055            # Check if one of all those tries has known success
1056            if [ "x$actual_dev" != "x" ]; then
1057                current_partition=$actual_dev
1058            else
1059                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1060            fi
1061        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1062        # current_partition contains only first column of /etc/fstab
1063        elif [ "`echo "$current_partition" | /bin/grep -i "UUID="`" != "" ]; then
1064            uuid=`echo "$current_partition" | cut -d'=' -f2`
1065            actual_dev=""
1066
1067            # 1st try, findfs - the RHEL way of finding labels and their partitions
1068            if [ -x "/sbin/findfs" ]; then
1069                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1070            fi
1071   
1072            # 2nd try : blkid, the good way for all UUID except swap
1073            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1074                actual_dev=`/sbin/blkid | /bin/grep "$uuid" | grep UUID= | cut -d':' -f1`
1075                # For LVM FS it will give a /dev/dm-# which should then be converted
1076                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1077                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1078                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1079                    for dev in `ls /dev/mapper/*`; do
1080                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1081                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1082                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1083                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1084                            break
1085                        fi
1086                    done
1087                fi
1088            fi
1089   
1090            # 3th try, with vol_id
1091            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1092                list_dev=`mount | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1093                for dev in $list_dev ; do
1094                    dev_exists=`/sbin/vol_id $dev | /bin/grep "$uuid"`
1095                    if [ "x$dev_exists" != "x" ]; then
1096                        actual_dev=$dev
1097                        break;
1098                    fi
1099                done
1100            fi
1101
1102            # 4th try, with dumpuuid (VMWare only ?) for swap
1103            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1104                list_dev=`cat /proc/swaps | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1105                for dev in $list_dev ; do
1106                    dev_exists=`/sbin/dumpuuid $dev | /bin/grep "$uuid"`
1107                    if [ "x$dev_exists" != "x" ]; then
1108                        actual_dev=$dev
1109                        break;
1110                    fi
1111                done
1112            fi
1113
1114            # Check if one of all those tries has known success
1115            if [ "x$actual_dev" != "x" ]; then
1116                current_partition=$actual_dev
1117            else
1118                Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1119            fi
1120        else
1121            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1122            # they use symlinks in fstab unrelated to what is shown in mount !
1123            if [ _"$partition_mountpt" = _"" ]; then
1124                # set default in case we dont't find it
1125                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -Ev "^#" | $AWK '{print $1}'`; do
1126                        if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1127                            str_to_find_fmt_with=$tmpp
1128                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$tmpp" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1129                            break;
1130                        fi
1131                done
1132            fi
1133        fi
1134
1135        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1136        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1137        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1138        # the former is then a link to the latter, so we test whether
1139        # $current_partition is actually such a link or not and set
1140        # $current_lvolume accordingly. On Debian you may find more than one answer
1141        # so we remove the one corresponding to /dev/.static
1142        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1143        # principle is the same and we need to find the link to it as well.
1144        # Note that $current_lvolume may well be an
1145        # ordinary device. It is just to make sure that we feed the right value
1146        # into any of the LVM tools if possible.
1147
1148        current_lvolume="$current_partition"
1149        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1150            # .static dir are a Debian specificity
1151            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1152            echo $current_lvolume | grep -q ' '
1153            if [ $? -eq 0 ]; then
1154                echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE 
1155            fi
1156        fi
1157        #
1158        # End of LVM device style variation code (other than $current_lvolume).
1159
1160        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1161            # Size computed via LVM not directly
1162            partition_size="lvm"
1163        else
1164            partition_size=`SizeOfPartition $current_partition`
1165            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1166            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1167            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1168                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition" | $AWK '{print $3}'`
1169                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1170                [ "$partition_format" != "swap" ] && partition_format="swap"
1171                if [ "$partition_size" = "" ] ; then
1172                    totalsize=0
1173                    items=0
1174                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1175                        totalsize=$(($totalsize+$i))
1176                        items=$(($items+1))
1177                    done
1178                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1179                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1180                    echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1181                fi
1182            fi
1183        fi
1184        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1185        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1186        if [ "$partition_mountpt" = "" ] ; then
1187            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1188                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1189                    partition_mountpt="raid"
1190                    partition_format="raid"
1191                else
1192                    partition_mountpt="lvm"
1193                    partition_format="lvm"
1194                fi
1195            fi
1196        fi
1197        psz=$partition_size
1198        echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1199        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1200        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1201            partition_mountpt="image"
1202            old_partition_fmt=$partition_format
1203            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1204            partition_size=$(($partition_size+1)); # just in case
1205            if [ "$partition_format" = "Linux" ] ; then
1206                echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1207                echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1208                partition_format=$old_partition_fmt
1209            fi
1210        fi
1211        if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " | grep -F " $current_partition "`" ] || [ "`echo " $EXCLUDE_DEVS " | grep " $current_partition "`" ] ; then
1212            echo "Excluding $current_partition from mountlist" >> $LOGFILE
1213            continue
1214        fi
1215        if [ ! "$partition_mountpt" ] ; then
1216            echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1217            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1218                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1219                [ "$partition_format" ] && break
1220            done
1221            echo "------- $FDISK log end ------------" >> $LOGFILE
1222            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1223                partition_format="compaq"
1224            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1225                LogIt "Unable to find mountpoint of $current_partition - ignoring"
1226                continue
1227            fi
1228        fi
1229        if [ "$redhat_label" ]; then
1230            label="$redhat_label"
1231        elif [ "$uuid" ]; then
1232            label="$uuid"
1233        fi
1234        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1235        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1236        unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1237        if [ "$current_partition" = "" ] ; then
1238            echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1239        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1240            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1241                partition_mountpt=raid
1242                partition_format=raid
1243                printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1244                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1245            else
1246                echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1247            fi
1248        elif [ "$partition_format" = "" ] ; then
1249            echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1250        elif [ "$partition_size" = "" ] ; then
1251            echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1252        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1253            continue
1254        else
1255            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1256                echo "Stupid bastard..." >> $LOGFILE
1257                partition_format="vfat"
1258            fi
1259            printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1260            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1261        fi
1262    done
1263}
1264
1265
1266MakeSureNumberIsInteger() {
1267    res=`echo "$1" | tr -s '\-[0-9]' ' '`
1268    if [ "$res" != " " ] && [ "$res" != "" ] ; then
1269    echo "result = '$res'"
1270        Die "$1 should be an integer"
1271    fi
1272}
1273
1274
1275OfferToMakeBootableISO() {
1276    local i old_pwd
1277    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1278        echo -en "Shall I make a bootable CD image? (y/[n]) "
1279        read i
1280        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1281    fi
1282    if [ _"$MINDI_TMP" = _"" ]; then
1283        Die "MINDI_TMP undefined"
1284    fi
1285    rm -Rf $MINDI_TMP/iso
1286    mkdir -p $MINDI_TMP/iso/{images,archives}
1287    cp -f $MINDI_CACHE/*.gz $MINDI_TMP/iso/images 2>> $LOGFILE || LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1288    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1289    for i in memdisk memtest.bin memtest.img ; do
1290        j=$MINDI_LIB/$i
1291        k=$MINDI_TMP/iso
1292        if [ -e "$j" ] ; then
1293            LogIt "Copying $j to $k"
1294            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1295            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1296            if [ _"$MONDO_SHARE" != _"" ]; then 
1297                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1298            fi
1299        fi
1300    done
1301    MakeMessageFile > $MINDI_TMP/iso/message.txt
1302    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1303    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1304    if [ _"$MONDO_SHARE" != _"" ]; then 
1305        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1306        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1307    fi
1308    MakeBootConfFile syslinux > $MINDI_TMP/iso/isolinux.cfg
1309    if [ "$ARCH" != "ia64" ] ; then
1310        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2> /dev/null || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1311    fi
1312    old_pwd=`pwd`
1313    cd $MINDI_TMP/iso
1314    if [ "$ARCH" != "ia64" ] ; then
1315        if [ _"$MONDO_SHARE" != _"" ]; then 
1316            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1317            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1318        fi
1319        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1320    else
1321        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1322        rm -f images/mindi-bootroot.$BOOT_SIZE.img
1323    fi
1324    if [ "$?" -ne "0" ] ; then
1325        echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1326        cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1327        echo "$ISO_CMD returned the following errors:-"
1328        cat $MINDI_TMP/mkisofs.log
1329        LogIt "Failed to create ISO image."
1330    else
1331        echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" | tee -a $LOGFILE
1332    fi
1333    rm -f $MINDI_TMP/mkisofs.log
1334    cd $old_pwd
1335}
1336
1337
1338OfferToMakeBootableUSB() {
1339    local i
1340    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1341        echo -n "Shall I make a bootable USB image ? (y/[n]) "
1342        read i
1343        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1344        if [ "$USBDEVICE" = "" ]; then
1345            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1346            read dev
1347            USBDEVICE=$dev
1348        fi
1349        echo "WARNING: This will erase all content on $USBDEVICE"
1350        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1351        read i
1352        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1353    fi
1354    if [ _"$MINDI_TMP" = _"" ]; then
1355        Die "MINDI_TMP undefined"
1356    fi
1357    rm -Rf $MINDI_TMP/usb
1358    mkdir -p $MINDI_TMP/usb
1359    USBPART="${USBDEVICE}1"
1360
1361    echo -en "Transforming $USBDEVICE in a Bootable device " 
1362    echo -en "."
1363    echo "Transforming $USBDEVICE in a Bootable device"  >> $LOGFILE
1364    echo "Checking $USBDEVICE" >> $LOGFILE
1365    $FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
1366    if [ $? -ne 0 ]; then
1367        echo "Unable to access $USBDEVICE" | tee -a $LOGFILE
1368        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1369        exit -1
1370    fi
1371    echo -en "."
1372    echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1373    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1374    echo "Erasing $USBDEVICE" >> $LOGFILE
1375    dd if=/dev/zero of=$USBDEVICE bs=16k count=4096 >> $LOGFILE 2>> $LOGFILE
1376    echo "Preparing $USBDEVICE" >> $LOGFILE
1377    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1378n
1379p
13801
1381
1382
1383t
1384b
1385a
13861
1387w
1388EOF
1389    if [ $? -ne 0 ]; then
1390        echo "Unable to create a vfat Filesystem on $USBDEVICE" | tee -a $LOGFILE
1391        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1392        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1393        MindiExit -1
1394    fi
1395    echo -en "."
1396    echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1397    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1398    if [ $? -ne 0 ]; then
1399        echo "Unable to create a vfat filesystem on $USBPART" | tee -a $LOGFILE
1400        echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" | tee -a $LOGFILE
1401        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1402        MindiExit -1
1403    fi
1404    echo -en "."
1405    echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1406    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1407    if [ $? -ne 0 ]; then
1408        echo "Unable to mount $USBPART on $MINDI_TMP/usb" | tee -a $LOGFILE
1409        echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" | tee -a $LOGFILE
1410        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1411        MindiExit -1
1412    fi
1413    echo -en "."
1414    mkdir -p $MINDI_TMP/usb/images
1415    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1416    echo -en "."
1417    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1418    for i in memdisk memtest.bin memtest.img ; do
1419        j=$MINDI_LIB/$i
1420        k=$MINDI_TMP/usb
1421        if [ -e "$j" ] ; then
1422            LogIt "Copying $j to $k"
1423            cp -f $j $k 2> /dev/null || Die "Failed to copy $j to $k"
1424            cp -f $j $MINDI_TMP 2> /dev/null || Die "Failed to copy $j to $MINDI_TMP"
1425        fi
1426    done
1427    echo -en "."
1428    MakeMessageFile > $MINDI_TMP/usb/message.txt
1429    echo -en "."
1430    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1431    echo -en "."
1432    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1433    echo -en "."
1434    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1435    echo -en "."
1436    umount $MINDI_TMP/usb
1437    if [ "$ARCH" != "ia64" ] ; then
1438        syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1439        if [ "$?" -ne "0" ] ; then
1440            echo "----------- syslinux's errors --------------" |tee -a $LOGFILE
1441            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1442            LogIt "Failed to create USB image."
1443        else
1444            echo -e "$DONE"
1445            echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1446        fi
1447        rm -f $MINDI_TMP/syslinux.log
1448    else
1449        echo "No USB boot support for ia64" | tee -a $LOGFILE
1450        MindiExit -1
1451    fi
1452}
1453
1454
1455MakeMessageFile() {
1456    iss="/dev/null"
1457    [ -e /etc/issue ] && iss="/etc/issue"
1458    [ -e /etc/issue.net ] && iss="/etc/issue.net"
1459    if [ "`grep -Fi "debian" $iss 2> /dev/null`" ] ; then
1460        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 $iss` `hostname`"% | sed s/KKKKK/"Kernel `uname  -r` on a `uname -m`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/%r/"`uname -r`"/ | sed s/%t/"`hostname`"/
1461    else
1462        sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt | sed s/YYYYY/"Mondo Rescue"/ | sed s/XXXXX/"a cousin of"/ | sed s/DDDDD/"`grep -i "linux" $iss | sed s~/~~ | head -n1 | tr -s ' ' ' '`"/ | sed s/KKKKK/"`grep -i "kernel" $iss | sed s~/~~ | head -n1 | tr -s ' ' ' '`"/ | sed s/TTTTT/"`LC_TIME=C date`"/ | sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/ | sed s/%r/"`uname -r`"/ | sed s/%t/"`hostname`"/
1463    fi
1464    if [ _"$MONDO_SHARE" != _"" ]; then
1465        if [ "$CDRECOVERY" != "yes" ] ; then
1466            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1467                echo -en "Press <enter> to continue.\n"
1468            elif [ ! "$MINDI_TMP" ] ; then
1469                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1470                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1471                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1472                fi
1473            else
1474                echo -en "$BOOT_MEDIA_MESSAGE"
1475            fi
1476        else
1477            echo -en "\
1478To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1479CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1480        fi
1481    fi
1482    echo -en "\n\n\n"
1483}
1484
1485
1486MakeBootConfFile() {
1487    local options i ooo
1488    options=""
1489    # Type of boot file (elilo or syslinux/isolinux)
1490    type=$1
1491    if [ "$type" = "elilo" ]; then
1492        sep="="
1493    else
1494        sep=" "
1495    fi
1496
1497    # Generic header for conf file
1498    if [ "$type" != "elilo" ] ; then
1499        echo -en "prompt 1\ndisplay message.txt\n"
1500    else
1501        echo -en "prompt\n"
1502    fi
1503
1504    # Compute which default option to boot from
1505    if [ "$CDRECOVERY" = "yes" ] ; then
1506        echo -en "default${sep}RESTORE\n"
1507    # In case it's mondoarchive
1508    elif [ _"$MONDO_SHARE" != _"" ]; then
1509        if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1510            echo -en "default${sep}iso\n"
1511        else
1512            echo -en "default${sep}interactive\n"
1513        fi
1514    else
1515        echo -en "default${sep}expert\n"
1516    fi
1517
1518    # Handle timeout
1519    if [ "$CDRECOVERY" != "yes" ] ; then
1520        echo -en "timeout${sep}300\n"
1521    else
1522        echo -en "timeout${sep}10000\n"
1523    fi
1524    echo -en "\n"
1525
1526    # prepare which labels will be generted
1527    if [ "$CDRECOVERY" = "yes" ] ; then
1528        options="RESTORE expert"
1529    else
1530        if [ _"$MONDO_SHARE" != _"" ]; then
1531            if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1532                options="iso"
1533            else
1534                options="interactive expert compare iso nuke isonuke"
1535            fi
1536        else
1537            options="expert"
1538        fi
1539    fi
1540
1541    # Generate rest of conf file
1542    for i in $options ; do
1543        ooo=$i
1544        [ "$ooo" = "RESTORE" ] && ooo="nuke"
1545        if [ "$type" = "elilo" ]; then
1546            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo_mode $ADDITIONAL_BOOT_PARAMS \"\n"
1547        else
1548            outstr="label $i\n\tkernel /vmlinuz\n\tappend initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo}_mode $ADDITIONAL_BOOT_PARAMS\n"
1549        fi
1550        echo -en "$outstr"
1551    done
1552
1553    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1554        if [ "$type" = "elilo" ]; then
1555            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1556            echo -en "image=/memdisk\n\tlabel=memtest\nappend=\"initrd=memtest.img\"\n"
1557        else
1558            echo -en "label memtest\n\tkernel /memtest.bin\n"
1559            echo -en "label=memtest\n\tkernel /memdisk\nappend initrd=memtest.img\n"
1560        fi
1561    fi
1562}
1563
1564
1565PrepareBootDiskImage_LILO() {
1566    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1567    imagesdir=$MINDI_CACHE
1568    kernelpath=$1
1569
1570    retval=0
1571    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1572    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1573    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1574    echo -en "..."
1575    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1576    mountpoint=$MINDI_TMP/mountpoint.$$
1577    mkdir -p $mountpoint
1578    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1579    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1580    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1581    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1582    mkdir -p $mountpoint/etc
1583    liloconf=$mountpoint/elilo.conf
1584
1585    MakeBootConfFile elilo > $liloconf
1586
1587    # Copy it so that CD-ROM menu entry is satisfied
1588    mountefi=0
1589    df -T | grep /boot/efi | grep -q vfat
1590    if [ $? -ne 0 ]; then
1591        mount /boot/efi
1592        if [ $? -ne 0 ]; then
1593            echo "You have to mount your EFI partition when using mindi"
1594            MindiExit -1
1595        fi
1596        mountefi=1
1597    fi
1598    el=`find /boot/efi -name elilo.efi`
1599    cp $el $mountpoint
1600    cp $liloconf $mountpoint
1601    if [ $mountefi -eq 1 ]; then
1602        umount /boot/efi 2>&1 > /dev/null
1603    fi
1604
1605    echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
1606    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1607    if [ "$?" -ne "0" ] ; then
1608        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1609        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1610        LogIt "Please unload some of your modules and try again."
1611        rm -f $MINDI_TMP/mtpt.$$
1612        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1613        retval=$(($retval+1))
1614    fi
1615    MakeMessageFile > $mountpoint/message.txt
1616
1617    mkdir -p $mountpoint/tmp
1618    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1619        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1620    fi
1621
1622    # copy the kernel across
1623    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1624    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1625    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1626    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
1627    if [ "$?" -ne "0" ] ; then
1628        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1629        du -sk $mountpoint/* >> $LOGFILE
1630        echo "--- end of list of files ---" >> $LOGFILE
1631        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1632Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1633        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1634        cd $old_pwd
1635        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1636        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1637    #   losetup /dev/loop0 -d
1638        [ "$imagefile" != "" ] && rm -f $imagefile
1639        return 0
1640    fi
1641    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1642    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1643    echo "Free space left on image = $free_space KB" >> $LOGFILE
1644    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1645    # make it bootable
1646    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1647    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1648    if [ "$KERN_DISK_MADE" ] ; then
1649        echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1650    fi
1651
1652    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1653    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1654    echo -en "..."
1655    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1656    if [ "$retval" -eq "0" ] ; then
1657        echo -en "...$DONE\n"
1658        if [ "$KERN_DISK_MADE" ] ; then
1659            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1660        fi
1661    else
1662        echo -en "...failed\n"
1663        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1664        [ "$imagefile" != "" ] && rm -f $imagefile
1665    fi
1666    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1667    return $retval
1668}
1669
1670
1671PrepareBootDiskImage_SYSLINUX() {
1672    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1673    imagesdir=$MINDI_CACHE
1674    kernelpath=$1
1675    do_boot_root_thingy=""
1676    local retval old_pwd
1677    retval=0
1678
1679    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1680    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1681    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1682    echo -en "..."
1683    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1684    mountpoint=$MINDI_TMP/mountpoint.$$
1685    mkdir -p $mountpoint
1686    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1687    echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1688    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1689    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1690
1691    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1692
1693    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1694    MakeMessageFile > $mountpoint/message.txt
1695    MakeBootConfFile syslinux > $mountpoint/syslinux.cfg
1696    echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
1697    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1698    if [ "$?" -ne "0" ] ; then
1699        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1700        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1701        LogIt "Please unload some of your modules and try again."
1702        rm -f $MINDI_TMP/mtpt.$$
1703        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1704        retval=$(($retval+1))
1705    fi
1706
1707    mkdir -p $mountpoint/tmp
1708    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1709        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1710    fi
1711
1712    # copy the kernel across
1713    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1714    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1715    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1716    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1717    if [ "$?" -ne "0" ] ; then
1718        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1719        du -sk $mountpoint/* >> $LOGFILE
1720        echo "--- end of list of files ---" >> $LOGFILE
1721        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n\
1722Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1723        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1724        cd $old_pwd
1725        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1726        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1727
1728        [ "$imagefile" != "" ] && rm -f $imagefile
1729        return 0
1730    fi
1731    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1732    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1733    echo "Free space left on image = $free_space KB" >> $LOGFILE
1734    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1735
1736    # make it bootable
1737    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1738    mkdir -p $mountpoint/etc
1739    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1740    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1741    echo -en "..."
1742    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1743
1744    if [ "$retval" -eq "0" ] ; then
1745        echo -en "...$DONE\n"
1746        if [ "$KERN_DISK_MADE" ] ; then
1747            [ "$imagefile" != "" ] && rm -f $imagefile
1748            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1749        fi
1750    else
1751        echo -en "...failed\n"
1752        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1753        [ "$imagefile" != "" ] && rm -f $imagefile
1754    fi
1755    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1756    return $retval
1757}
1758
1759
1760ParseModprobeForIncludes() {
1761local MODPROBE_CONF mpincfile includes include
1762
1763MODPROBE_CONF=/etc/modprobe.conf
1764mpincfile=$1
1765touch $mpincfile
1766if [ -a $MODPROBE_CONF ]; then
1767    includes=$(awk '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort|uniq)
1768    if [ -n "$includes" ]; then
1769        for include in $includes
1770        do
1771            if [ -a "$include" ]; then
1772                echo $include >> $mpincfile
1773            fi
1774        done
1775    fi
1776fi
1777}
1778
1779
1780PrepareDataDiskImages() {
1781    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
1782
1783    imagesdir=$MINDI_CACHE
1784    rm -f $imagesdir/mindi.iso
1785    needlist=$MINDI_TMP/what-we-need.txt
1786    bigdir=$MINDI_TMP/bigdir
1787    mkdir -p $bigdir/usr/bin
1788    mkdir -p $bigdir/usr/sbin
1789    includefile=$MINDI_TMP/$$.includefile.txt
1790
1791    lfiles="$DEPLIST_FILE"
1792    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
1793    ParseModprobeForIncludes $includefile
1794    lines=$(($lines+`cat $includefile | wc -l`))
1795    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
1796    res=$?
1797    rm -f $includefile
1798    if [ "$YOUR_KERNEL_SUCKS" ]; then
1799        pwd=`pwd`
1800        cd $MINDI_TMP
1801        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
1802            tar cf - ./$i 2>> $LOGFILE | (cd $bigdir ; tar xf -) || Die "PDDI can't copy $i->$bigdir"
1803        done
1804        for i in $EXTRA_MODS ; do
1805            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
1806            [ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
1807            for k in $j ; do
1808                tar cf - $k 2>> $LOGFILE | (cd $bigdir ; tar xf -)
1809                echo "Added failsafe module $k to ramdisk" >> $LOGFILE
1810            done
1811        done
1812        cd $pwd
1813    else
1814        ListKernelModulePaths >> $needlist
1815    fi
1816    if [ "$res" -ne "0" ] ; then
1817        Die "You have $res files present in dependency list\nbut absent from filesystem."
1818    fi
1819    FindAndAddUserKeyboardMappingFile
1820    mkdir -p $bigdir/tmp
1821    if [ _"$MONDO_SHARE" != _"" ]; then
1822        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
1823        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
1824    fi
1825    [ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
1826    DropOptimizedLibraries $needlist $bigdir
1827    echo -en "Assembling dependency files"
1828    CopyDependenciesToDirectory < $needlist $bigdir
1829
1830    # also copy io.sys and msdos.sys, if we can find them
1831    for i in `mount | cut -d' ' -f3` ; do
1832        for j in io.sys msdos.sys ; do
1833            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
1834        done
1835    done
1836
1837    # master boot record, too
1838    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
1839    if [ "$i" ] ; then
1840        LogIt "Backing up $i's MBR"
1841        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
1842        sleep 1
1843        sync
1844        j=$i
1845        [ -h "$j" ] && j=`readlink -f $j`
1846        LogIt "Creating /dev/boot_device ($j)"
1847        mkdir -p $bigdir/dev
1848        cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null || Die "Unable to create /dev/boot_device on ramdisk"
1849    fi
1850
1851    old_pwd=`pwd`
1852    cd $bigdir
1853
1854    # Get terminfo content
1855    ti="usr/share/terminfo/l"
1856    if [ -d /$ti ]; then
1857        mkdir -p $ti
1858        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogIt "WARNING - error occurred while copying terminfo"
1859    fi
1860    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
1861        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
1862        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
1863    fi
1864    [ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE | tar xf -
1865    cd $old_pwd
1866    echo -e "$DONE"
1867    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
1868    MakeMountlist $MINDI_TMP/mountlist.txt
1869    mkdir -p $bigdir/tmp
1870    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
1871    if [ _"$MONDO_SHARE" != _"" ]; then
1872        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
1873    fi
1874    if [ $LVM != "false" ]; then
1875        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
1876        if [ "$?" -ne "0" ]; then
1877            LVM="false"
1878            rm -f $bigdir/tmp/i-want-my-lvm
1879        fi
1880    fi
1881    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
1882    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
1883    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
1884    if [ _"$MONDO_SHARE" != _"" ]; then
1885        for q in filelist.full.gz biggielist.txt ; do
1886            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
1887            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
1888        done
1889    fi
1890
1891    echo -en "Tarring and zipping the data content..."
1892    size_of_all_tools=`du -sk $bigdir | cut -f1`
1893    (cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null | gzip -9 > $imagesdir/all.tar.gz)
1894    du -sk $imagesdir/*gz >> $LOGFILE
1895    echo -e "$DONE"
1896
1897    FRIENDLY_OUTSTRING="Boot and data disk images were created."
1898    rm -rf $bigdir
1899    rm -f $needlist
1900}
1901
1902
1903ProcessLDD() {
1904    local incoming f d nd bd bnd
1905    read incoming
1906    while [ "$incoming" != "" ]; do
1907        # We take the full path name of the dyn. lib. we want
1908        incoming=`echo "$incoming" | awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
1909        for f in $incoming ; do
1910            # echo modified file name if one of the parent dir is a link
1911            # by replacing the original dirname by the destination of the link
1912            d="`dirname $f`"
1913            found="false"
1914            while [ "$d" != "/" ]; do
1915                if [ -h "$d" ]; then
1916                    nd=`readlink -f $d`
1917                    bd=`basename $d`
1918                    bnd=`basename $nd`
1919                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
1920                    echo $d
1921                fi
1922                d="`dirname $d`"
1923            done
1924
1925            echo "$f"
1926            echo "`ReadAllLink $f`"
1927        done
1928        read incoming
1929    done
1930}
1931
1932
1933Prompt() {
1934    echo -en "$1"
1935    read line
1936}
1937
1938
1939ReadLine() {
1940    local i incoming
1941    read incoming
1942    i=0
1943    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
1944        i=$(($i+1))
1945        read incoming
1946    done
1947    echo "$incoming"
1948}
1949
1950
1951SizeOfPartition() {
1952    local devpath drive res stub
1953    device=$1
1954    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
1955        res=`SizeOfRaidPartition $device`
1956        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
1957        echo "$res"
1958        return 0
1959    fi
1960    # patch from Bill <bill@iwizard.biz> - 2003/08/25
1961    res=`$FDISK -s $device 2>> $LOGFILE`
1962    # end patch
1963    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2`
1964    [ "$res" = "" ] && res="-1"
1965    echo $res
1966    return 0
1967}
1968
1969
1970SizeOfRaidPartition() {
1971    local real_dev smallest_size silly tmp
1972
1973    silly=999999999
1974    smallest_size=$silly
1975
1976    for real_dev in `GetRaidDevMembers $1` ; do
1977        tmp=`SizeOfPartition $real_dev`
1978        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
1979    done
1980
1981    if [ "$smallest_size" = "$silly" ] ; then
1982        echo "-1"
1983        return 1
1984    else
1985        echo "$smallest_size"
1986        return 0
1987    fi
1988}
1989
1990
1991StripComments()
1992{
1993    local tempfile
1994
1995    tempfile=$MINDI_TMP/$$.strip.txt
1996    cp -f $1 $tempfile 2>> $LOGFILE
1997    $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
1998    rm -f $tempfile
1999    echo "Stripped comments from $2" >> $LOGFILE
2000}
2001
2002
2003
2004StripExecutable()
2005{
2006    local tmpfile
2007
2008    tmpfile=$MINDI_TMP/stripped.$$.dat
2009    [ -d "$1" ] || [ -h "$1" ] && return
2010    cp -f $1 $tmpfile 2>> $LOGFILE
2011    strip $tmpfile 2> /dev/null
2012    if [ "$?" -eq "0" ] ; then
2013        cp -f $tmpfile $1 2>> $LOGFILE
2014        echo "Stripped binary $2" >> $LOGFILE
2015    fi
2016    rm -f $tmpfile
2017}
2018
2019
2020TryToFindKernelPath() {
2021    local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2022
2023    we_want_version=`uname -r`
2024    possible_kernels=""
2025    duff_kernels=""
2026   
2027    if [ "$ARCH" = "ia64" ] ; then
2028       root="/boot/efi/efi"
2029    else
2030       root="/"
2031    fi
2032    for fname in `find $root -maxdepth 2 -type f | grep -E 'lin|kern' | grep -Ev '^/proc/|^/net/'` ; do
2033        [ ! -e "$fname" ] && continue
2034        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2035        file $fname | grep -q gzip
2036        if [ "$?" -eq "0" ] ; then
2037            # Used by ia64
2038            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2039        else
2040            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2041        fi
2042        [ "$fkern_ver" = "" ] && continue
2043        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2044        [ -f "$fname" ] || continue
2045        [ -h "$fname" ] && continue
2046        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2047        file $fname | grep -q gzip
2048        if [ "$?" -eq "0" ] ; then
2049            # Used by ia64
2050            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2051                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2052                duff_kernels="$fname $duff_kernels"
2053            else
2054                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2055                possible_kernels="$fname $possible_kernels"
2056            fi
2057        else
2058            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2059                LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2060                duff_kernels="$fname $duff_kernels"
2061            else
2062                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2063                possible_kernels="$fname $possible_kernels"
2064            fi
2065        fi
2066    done
2067    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2068        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2069    fi
2070    if [ ! "$possible_kernels" ] ; then
2071        LogIt "No kernel matches exactly. Are there any duff kernels?"
2072        possible_kernels="$duff_kernels"
2073        if [ ! "$possible_kernels" ] ; then
2074            LogIt "Sorry, no duff kernels either"
2075        else
2076            LogIt "I bet you're running Debian or Gentoo, aren't you?"
2077            LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2078        fi
2079    fi
2080    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | sort -u | tr '\n' ' '`
2081    noof_kernels=`CountItemsIn "$possible_kernels"`
2082    if [ "$noof_kernels" -eq "0" ] ; then
2083        LogIt "Could not find your kernel."
2084        if [ -e "/boot/vmlinuz" ] ; then
2085            LogIt "Using /boot/vmlinuz as a last resort."
2086            output=/boot/vmlinuz
2087        else
2088            output=""
2089        fi
2090    elif [ "$noof_kernels" -eq "1" ] ; then
2091        kernelpath=`echo "$possible_kernels" | sed s/' '//`
2092        echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2093        output="$kernelpath"
2094    else
2095        for i in $possible_kernels ; do
2096            if echo $i | grep "`uname -r`" ; then
2097                LogIt "OK, I used my initiative and found that "
2098                LogIt "$i is probably your kernel. "
2099                output="$i"
2100                return
2101            fi
2102        done
2103        if echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null ; then
2104            output=/boot/vmlinuz
2105            echo "Schlomo, this one's for you." >> $LOGFILE
2106        else
2107            LogIt "Two or more possible kernels found. You may specify any one of them and the "
2108            LogIt "boot disks will still work, probably. If one does not work, try another."
2109            LogIt "$possible_kernels"
2110            echo ""
2111        fi
2112    fi
2113    echo "$output" | tr -s ' ' '\n' | sort -u | tr '\n' ' '
2114}
2115
2116
2117TurnTgzIntoRdz() {
2118    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2119
2120    tgz_dir_fname=$1
2121    rdz_fname=$2
2122    kernelsize=$3
2123    maxsize=$(($BOOT_SIZE-$kernelsize))
2124    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2125    tempfile=$MINDI_TMP/temp.rd
2126    mountpoint=$MINDI_TMP/mnt1
2127    res=0
2128    echo -en "..."
2129    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2130    echo -en "..."
2131    echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2132    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2133    echo -en "..."
2134    mkdir -p $mountpoint
2135    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2136    echo -en "..."
2137    old_pwd=`pwd`
2138    cd $mountpoint
2139
2140    # AL04Oct08: Check whether /lib64 is a link and if so explicitly create one in rootfs
2141    if [ -h "/lib64" ]; then
2142        mkdir -p lib || LogIt "Unable to create lib in $mountpoint."
2143        ln -s lib lib64 || LogIt "/lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2144    fi
2145
2146    cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2147    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2148
2149    cd dev || Die "Can't cd to dev"
2150    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2151    rm -f dev-entries.tgz
2152    cd ..
2153
2154    for w in insmod.static insmod.static.old ; do
2155        s=`which $w 2> /dev/null`
2156        if [ -e "$s" ] ; then
2157            tar cf - $s 2> /dev/null | tar xf -
2158        fi
2159    done
2160
2161    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2162
2163    # Handle the case where busybox and mount are dynamically linked
2164    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2165    if [ $? -eq 0 ]; then
2166        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2167        rm -f bin/mount $MINDI_TMP/busy.lis
2168        mountlis=`grep mount $DEPLIST_FILE`
2169        for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
2170            if [ -f $f ]; then
2171                LocateDeps $f >> $MINDI_TMP/busy.lis
2172            fi
2173        done
2174        tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null | tar xf -
2175        rm -f $MINDI_TMP/busy.lis
2176    fi
2177
2178    # Copy of files mandatory for ld.so
2179    cp -rp /etc/ld.so.c* $mountpoint/etc
2180
2181    mkdir -p $mountpoint/tmp
2182    # Management of udev (which includes modprobe in rules)
2183    ps auxww | grep -v grep | grep -qw udevd
2184    if [ $? -eq 0 ]; then
2185        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2186        LogIt "udev device manager found"
2187        tar cf - /etc/udev 2> /dev/null | tar xf -
2188        # This avoids NIC remapping if on another machine at restore time on Debian at least
2189        rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2190        tar cf - /lib*/udev 2> /dev/null | tar xf -
2191        if [ -x /sbin/udevd ]; then
2192            lis2=`grep -Ev '^#' $MINDI_CONF/udev.files` 
2193            lis=""
2194            # Get only the files which exist in that list
2195            # and potentially their symlink structure
2196            for i in $lis2; do
2197                if [ -h $i ]; then
2198                    j=$i
2199                    while [ -h $j ]; do
2200                        lis="$lis $j"
2201                        j=`readlink $j`
2202                    done
2203                    lis="$lis $j"
2204                elif [ -f $i ]; then
2205                    lis="$lis $i"
2206                fi
2207            done
2208            # And their deps
2209            LocateDeps $lis > $MINDI_TMP/udev.lis
2210            for i in $lis; do
2211                if [ "`echo $i | cut -c1`" = "/" ]; then
2212                    j=`echo $i | cut -c2-`
2213                    [ "$j" != "" ] && rm -f $j
2214                fi
2215            done
2216            tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null | tar xf -
2217            rm -f $MINDI_TMP/udev.lis
2218        else
2219            echo "udevd daemon not in standard place (/sbin)" 2>&1 | tee -a $LOGFILE
2220            echo "mindi will use static devices which may cause problems" 2>&1 | tee -a $LOGFILE
2221            rm -f $mountpoint/tmp/USE-UDEV
2222        fi
2223    fi
2224
2225    # Management of potential HW info (Proliant only at the moment)
2226    rm -rf $MINDI_CACHE/bkphw
2227    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2228    if [ -d $MINDI_CACHE/bkphw ]; then
2229        LogIt "Hardware Information found and saved ..."
2230        cp -rp $MINDI_CACHE/bkphw .
2231        if [ -f $MINDI_CACHE/tools.files ]; then
2232            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2233            LocateDeps $lis > $MINDI_TMP/tools.lis
2234            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null | tar xf -
2235        fi
2236        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2237            mv -f $MINDI_CACHE/mindi-rsthw .
2238            chmod 755 ./mindi-rsthw
2239        fi
2240        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2241    fi
2242
2243    for w in cdrom groovy-stuff ; do
2244        mkdir -p mnt/$w
2245    done
2246
2247    tar cf - /dev/fd0*[1,2][4,7,8]* 2> /dev/null | tar xf -
2248
2249    cd $old_pwd
2250    echo -en "..."
2251    old_pwd=`pwd`
2252    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2253        cd $MINDI_TMP
2254        needed_modules_path=lib/modules/$FAILSAFE_KVER
2255    else
2256        cd /
2257        if [ "${kernelname}" != "" ]
2258        then
2259            needed_modules_path=lib/modules/${kernelname}
2260        else
2261            needed_modules_path=lib/modules/`uname -r`
2262        fi
2263    fi
2264
2265    needed_modules=""
2266    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2267
2268    if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2269        # For PXE boot
2270        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2271    fi
2272    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2273        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2274    fi
2275    for i in $DENY_MODS; do
2276        echo "Removing $i from the list of modules to load" >> $LOGFILE
2277        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2278    done
2279
2280    [ -e "$needed_modules_path" ] || LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2281    for i in $list_of_groovy_mods ; do
2282        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2283    done
2284
2285    for i in $needed_modules ; do
2286        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2287        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2288        echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2289        tar cf - $i 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy $i to $mountpoint"
2290        # Uncompress modules if not using udev and native modprobe
2291        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2292            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2293                echo "Uncompressing $i" >> $LOGFILE
2294                gunzip -f $mountpoint/$i
2295            fi
2296        fi
2297    done
2298
2299    # Also copy modules.dep in case of udev so that normal modprobe works
2300    tar cf - /$needed_modules_path/modules.dep 2>/dev/null | (cd $mountpoint ; tar xf -) || LogIt "Unable to copy modules.dep to $mountpoint"
2301
2302    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2303        echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2304        [ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2305        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2306        rm -f $mountpoint/sbin/devfsd
2307    fi
2308    cd $old_pwd
2309    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2310    dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2311    rm -f $mountpoint/zero
2312    if [ _"$MONDO_SHARE" != _"" ]; then
2313        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2314        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2315        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null || Die "Cannot copy mountlist to ramdisk"
2316        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2317        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2318        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2319        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2320        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2321        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2322    fi
2323    mkdir -p $mountpoint/proc
2324    echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
2325    # Determine what filesystem to use for initrd image
2326    echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2327    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2328    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2329    case "$gvFileSystem" in
2330    "ext2fs")
2331        # say what will be used
2332        echo "Creating an ext2 initrd image..." >> $LOGFILE
2333        # kernel expects linuxrc in ext2 filesystem
2334        ( cd $mountpoint && ln -sf sbin/init linuxrc )
2335        # unmount loop filesystem and create image file using the standard approach
2336        umount $mountpoint || Die "Cannot unmount $tempfile"
2337        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2338        bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2339        ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2340        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2341        rm -f ${rdz_fname}.tmp
2342        # log that we are done
2343        echo "...done." >> $LOGFILE
2344    ;;
2345    "initramfs")
2346        # say what will be used
2347        echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2348        # make sure that cpio is there
2349        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2350        # go into filesystem
2351        cd $mountpoint
2352        # kernel expects init in cpio filesystem
2353        ln -sf sbin/init init
2354        # create cpio image file and unmount loop filesystem
2355        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2356        cd $old_pwd
2357        umount $mountpoint || Die "Cannot unmount $tempfile"
2358        # log that we are done
2359        echo "...done." >> $LOGFILE
2360    ;;
2361    *)
2362        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2363    ;;
2364    esac
2365    if [ "$res" -eq "0" ] ; then
2366        echo -en "..."
2367    else
2368        echo -en "\rMade an rdz WITH ERRORS.           \n"
2369    fi
2370    return 0
2371}
2372
2373
2374##############################################################################
2375#----------------------------------- Main -----------------------------------#
2376##############################################################################
2377
2378# Now we can create what we need
2379mkdir -p $MINDI_TMP
2380
2381# Purge from potential old run
2382if [ _"$MINDI_CACHE" = _"" ]; then
2383    Die "MINDI_CACHE undefined"
2384fi
2385rm -rf $MINDI_CACHE/* 2> /dev/null
2386mkdir -p $MINDI_CACHE
2387
2388if [ "$1" = "--printvar" ] ; then
2389    shift
2390    if [ _"$1" != _"" ] ; then
2391        set | grep -Ew "^$1" | cut -d= -f2
2392    fi
2393    MindiExit 0
2394fi
2395
2396> $LOGFILE
2397echo "mindi v$MINDI_VERSION" >> $LOGFILE
2398echo "$ARCH architecture detected" >> $LOGFILE
2399echo "mindi called with the following arguments:" >> $LOGFILE
2400echo "$@" >> $LOGFILE
2401echo "Start date : `date`" >> $LOGFILE
2402echo "-----------------------------" >> $LOGFILE
2403
2404[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2405
2406# Log some capital variables
2407[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2408echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2409echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2410echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2411[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2412echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2413if [ -f $MINDI_CONFIG ]; then
2414    echo "-----------------------------" >> $LOGFILE
2415    echo " Mindi configuration file    " >> $LOGFILE
2416    echo "-----------------------------" >> $LOGFILE
2417    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2418    echo "-----------------------------" >> $LOGFILE
2419fi
2420
2421
2422trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2423
2424# Sanity checks
2425which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2426which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2427which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2428which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2429if which awk &> /dev/null ; then
2430    if ! which gawk &> /dev/null ; then
2431        LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2432    fi
2433fi
2434which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2435[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
2436
2437[ "`uname -r | grep "2.4.[0-6]" | grep -v "2.4.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2438
2439# Update the PATH variable if incomplete
2440if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2441    PATH=$PATH:/sbin:/usr/sbin
2442    export PATH
2443    echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2444    echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2445    echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2446fi
2447
2448# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2449if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2450    source $MINDI_LIB/FindDistroFailsafe
2451    # Log kernel image
2452    LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2453else
2454    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2455fi
2456
2457if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2458    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2459fi
2460
2461### BERLIOS
2462### Fix as it's not mandatory on ia64
2463if [ "$ARCH" = "ia64" ] ; then
2464    if which elilo &> /dev/null ; then
2465        LILO_EXE=elilo
2466    else
2467        LILO_EXE=`which false 2> /dev/null`
2468    fi
2469else
2470    FindIsolinuxBinary
2471fi
2472trap "Aborted" SIGTERM
2473DONE="\r\t\t\t\t\t\t\t\tDone.         "
2474kernelpath=""
2475MONDO_ROOT=/var/cache/mondo
2476mkdir -p $MONDO_ROOT
2477
2478if [ -d "/proc/lvm" ]; then
2479    # LVM v1
2480    LVMCMD=""
2481    LVM="v1"
2482elif [ -d "/dev/mapper" ]; then
2483    # LVM v2
2484    LVMCMD="lvm"
2485    LVM="v2"
2486else
2487    LVM="false"
2488fi
2489echo "LVM set to $LVM" >> $LOGFILE
2490echo "----------" >> $LOGFILE
2491echo "mount result:" >> $LOGFILE
2492echo "-------------" >> $LOGFILE
2493mount >> $LOGFILE
2494echo "-------------" >> $LOGFILE
2495if [ -e /etc/raidtab ]; then
2496    echo "-------------" >> $LOGFILE
2497    echo "/etc/raidtab content:" >> $LOGFILE
2498    echo "-------------" >> $LOGFILE
2499    cat /etc/raidtab >> $LOGFILE
2500fi
2501echo "-------------" >> $LOGFILE
2502echo "cat /proc/cmdline:" >> $LOGFILE
2503echo "-------------" >> $LOGFILE
2504cat /proc/cmdline >> $LOGFILE
2505echo "-------------" >> $LOGFILE
2506echo "cat /proc/swaps:" >> $LOGFILE
2507echo "-------------" >> $LOGFILE
2508cat /proc/swaps >> $LOGFILE
2509echo "-------------" >> $LOGFILE
2510echo "cat /proc/partitions:" >> $LOGFILE
2511echo "-------------" >> $LOGFILE
2512cat /proc/partitions >> $LOGFILE
2513echo "-------------" >> $LOGFILE
2514echo "cat /proc/filesystems:" >> $LOGFILE
2515echo "-------------" >> $LOGFILE
2516cat /proc/filesystems >> $LOGFILE
2517echo "-------------" >> $LOGFILE
2518echo "lsmod result:" >> $LOGFILE
2519echo "-------------" >> $LOGFILE
2520lsmod >> $LOGFILE
2521MODULES="`cat /proc/modules | awk '{print $1}'`"
2522if [ -x /usr/sbin/esxcfg-module ]; then
2523    echo "-------------" >> $LOGFILE
2524    echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2525    echo "-------------" >> $LOGFILE
2526    echo "VMWare modules" >> $LOGFILE
2527    echo "-------------" >> $LOGFILE
2528    /usr/sbin/esxcfg-module -l >> $LOGFILE
2529    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | awk '{print $1}'`"
2530fi
2531echo "FORCE_MODS:" >> $LOGFILE
2532echo "-------------" >> $LOGFILE
2533echo $FORCE_MODS >> $LOGFILE
2534echo "-------------" >> $LOGFILE
2535echo "DENY_MODS:" >> $LOGFILE
2536echo "-------------" >> $LOGFILE
2537echo $DENY_MODS >> $LOGFILE
2538echo "-------------" >> $LOGFILE
2539echo "df result:" >> $LOGFILE
2540echo "----------" >> $LOGFILE
2541df -T >> $LOGFILE
2542echo "-------------" >> $LOGFILE
2543echo "Liste of extra modules is:" >> $LOGFILE
2544echo "$EXTRA_MODS" >> $LOGFILE
2545echo "-------------" >> $LOGFILE
2546
2547# Compute libata version
2548laver=`modinfo libata | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
2549# If libata v2 is used then remove ide-generic as it will perturbate boot
2550if [ "`echo $MODULES | grep libata`" ]; then
2551    if [ "$laver" = "2" ]; then
2552        DENY_MODS="$DENY_MODS ide-generic"
2553        echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2554        echo "-------------" >> $LOGFILE
2555    fi
2556fi
2557
2558FLOPPY_WAS_MOUNTED=""
2559for mtpt in /media/floppy /mnt/floppy /floppy ; do
2560    if mount | grep -w $mtpt &> /dev/null ; then
2561        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2562        umount $mtpt
2563    fi
2564done
2565
2566#
2567# If we have a USB device we need to store info
2568# and remove it from the parameters line
2569#
2570if [ "$#" -ne "0" ] ; then
2571    if [ "$1" = "--usb" ] ; then
2572        shift
2573        USBDEVICE=$1
2574        if [ _"$USBDEVICE" = _"" ]; then
2575            Die "No USB device specified"
2576        fi
2577        shift
2578    fi
2579fi
2580
2581if [ "$#" -ne "0" ] ; then
2582    if [ "$1" = "--findkernel" ] ; then
2583        res=`TryToFindKernelPath`
2584        # Avoids logfile content for mondo
2585        export MONDO_SHARE=""
2586        if [ "$res" = "" ] ; then
2587            MindiExit -1
2588        else
2589            echo "$res"
2590            MindiExit 0
2591        fi
2592    elif [ "$1" = "--locatedeps" ] ; then
2593        [ ! "$2" ] && Die "Please specify the binary to look at"
2594        LocateDeps $2
2595        # Avoids logfile content for mondo
2596        export MONDO_SHARE=""
2597        MindiExit $?
2598    elif [ "$1" = "--readalllink" ] ; then
2599        [ ! "$2" ] && Die "Please specify the binary to look at"
2600        ReadAllLink $2
2601        # Avoids logfile content for mondo
2602        export MONDO_SHARE=""
2603        MindiExit $?
2604    elif [ "$1" = "--makemountlist" ] ; then
2605        [ ! "$2" ] && Die "Please specify the output file"
2606        MakeMountlist $2
2607        # Avoids logfile content for mondo
2608        export MONDO_SHARE=""
2609        MindiExit $?
2610    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
2611        echo "Mindi v$MINDI_VERSION"
2612        # Avoids logfile content for mondo
2613        export MONDO_SHARE=""
2614        MindiExit 0
2615    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2616        MONDO_TMP=$2
2617        # Change MINDI_TMP for the one provided by mondo
2618        # So that it can get back the built files
2619        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
2620        rmdir $MINDI_TMP
2621        export MINDI_TMP=$MONDO_TMP
2622        mkdir -p $MINDI_TMP
2623        # This is the scratch dir in mondo - subdir images
2624        MINDI_CACHE=$3
2625        if [ _"$MINDI_CACHE" != _"" ]; then
2626            mkdir -p $MINDI_CACHE
2627        fi
2628        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
2629###
2630### Sq-Modification...
2631### Attempt to locate kernel specific module path
2632### if module path is found then use it other wise use uname -r to set it...
2633###
2634        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2635        LogIt "kernelname = $kernelname"
2636        LogIt "kernelpath = $kernelpath"
2637        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2638        then
2639           LogIt "Module path for ${kernelpath} not found..."
2640           LogIt "using running kernel\'s modules."
2641           kernelname=`uname -r`
2642        else
2643           LogIt "Using modules for kernel: ${kernelname}"
2644        fi
2645###
2646### end of Sq-Modification
2647###
2648        TAPEDEV=$5
2649        TAPESIZE=$6
2650        FILES_IN_FILELIST=$7
2651        USE_LZO=$8
2652        CDRECOVERY=$9
2653        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
2654            IMAGE_DEVS=""
2655        else
2656            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
2657        fi
2658        if [ "${11}" ] ; then
2659            LILO_OPTIONS=""
2660    #       LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
2661        fi
2662        LAST_FILELIST_NUMBER=${12}
2663        ESTIMATED_TOTAL_NOOF_SLICES=${13}
2664        EXCLUDE_DEVS="${14}"
2665        USE_COMP="${15}"
2666        USE_LILO="${16}"
2667        USE_STAR="${17}"
2668        INTERNAL_TAPE_BLOCK_SIZE="${18}"
2669        DIFFERENTIAL="${19}"
2670        USE_GZIP="${20}"
2671        NOT_BOOT="${21}"
2672        [ "$USE_COMP" = "" ] && USE_COMP=yes
2673        [ "$USE_GZIP" = "" ] && USE_GZIP=no
2674        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
2675        [ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
2676        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
2677        kernelname=`echo $kernelpath | cut -d'-' -f2-`
2678        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2679        then
2680           LogIt "Module path for ${kernelpath} not found..."
2681           LogIt "using running kernel\'s modules."
2682           kernelname=`uname -r`
2683        else
2684           LogIt "Using modules for kernel: ${kernelname}"
2685        fi
2686        [ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
2687        # MONDO_ROOT is the real scratchdir
2688        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
2689        if [ _"$MONDO_ROOT" != _"" ]; then
2690            mkdir -p $MONDO_ROOT
2691        else
2692            Die "MONDO_ROOT is undefined"
2693        fi
2694    else
2695        echo "Syntax: mindi (--custom ....)" >> /dev/stderr
2696        MindiExit -1
2697    fi
2698fi
2699[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
2700
2701if [ _"$MONDO_SHARE" = _"" ]; then
2702    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
2703    LogIt "Latest Mindi is available from http://www.mondorescue.org"
2704    LogIt "BusyBox sources are available from http://www.busybox.net"
2705    LogIt "------------------------------------------------------------------------------"
2706else
2707    echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
2708fi
2709if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
2710    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
2711else
2712    LogIt "Unable to find mindi-busybox, please install it"
2713    MindiExit -1
2714fi
2715
2716# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
2717insmod /lib/modules/`uname -r`/*/*/misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
2718for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
2719    insmod $i >> $LOGFILE 2>> $LOGFILE
2720done
2721
2722KERN_DISK_MADE=""
2723
2724echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
2725echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
2726echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
2727if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
2728    LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
2729    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2730    MakeMountlist $MINDI_TMP/mountlist.txt
2731    mkdir -p $MINDI_TMP/small-all/tmp
2732    cd $MINDI_TMP/small-all
2733    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null || Die "Cannot copy small all.tar.gz"
2734    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz || Die "Cannot make small all.tar.gz"
2735    sleep 2
2736    LogIt "Done. Exiting."
2737    MindiExit 0
2738fi
2739
2740if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2741    LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
2742fi
2743
2744if [ "$kernelpath" = "" ] ; then
2745    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
2746    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
2747    read ch
2748    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
2749        USE_OWN_KERNEL="yes"
2750    else
2751        USE_OWN_KERNEL="no"
2752    fi
2753    if [ "$USE_OWN_KERNEL" = "yes" ]; then
2754        YOUR_KERNEL_SUCKS=""
2755        kernelpath=`TryToFindKernelPath`
2756        if [ "$kernelpath" = "" ] ; then
2757            echo -n "Please enter kernel path : "
2758            read kernelpath
2759        fi
2760    else
2761        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
2762    fi
2763fi
2764if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
2765    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2766    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
2767        source $MINDI_LIB/FindDistroFailsafe
2768        # Log kernel image
2769        LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2770        kernelpath="$FAILSAFE_KBIN"
2771        LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
2772        LogIt "The failsafe kernel is $kernelpath.\n"
2773        LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
2774        LogIt "disks then it may still be a result of a problem with your kernel.\n"
2775        pwd=`pwd`
2776        cd $MINDI_TMP
2777        mkdir -p lib/modules
2778        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
2779        cd $pwd
2780    else
2781        kernelpath=$MINDI_LIB/vmlinuz
2782        LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
2783        LogIt "However, you are still running your kernel. If Mindi fails to create your"
2784        LogIt "disks then it may still be a result of a problem with your kernel."
2785        pwd=`pwd`
2786        cd $MINDI_TMP
2787        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
2788        cd $pwd
2789    fi
2790    YOUR_KERNEL_SUCKS="Your kernel sucks"
2791fi
2792echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
2793[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
2794
2795[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
2796
2797PrepareDataDiskImages
2798
2799ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2800rds=$(($ramdisk_size-$((ramdisk_size%4096))))
2801export ramdisk_size=$rds
2802
2803echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
2804if [ "$ARCH" = "ia64" ] ; then
2805    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
2806else
2807    PrepareBootDiskImage_SYSLINUX $kernelpath || Die "Failed to create $ramdisk_size MB disk image."
2808fi
2809
2810[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
2811...Or type 'memtest' to test your PC's RAM thoroughly.\n"
2812
2813if [ _"$MONDO_SHARE" = _"" ]; then
2814    ListImagesForUser
2815    OfferToMakeBootableISO
2816    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
2817        OfferToMakeBootableUSB
2818    fi
2819    LogIt "Finished."
2820elif [ "$TAPEDEV" ] ; then
2821    rm -f $MINDI_CACHE/{*img,*iso}
2822    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2823        OfferToMakeBootableUSB
2824    fi
2825    OfferToMakeBootableISO
2826    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
2827        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
2828    else
2829        Die "Cannot find all.tar.gz, to be written to tape"
2830    fi
2831elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2832    OfferToMakeBootableUSB
2833else
2834    OfferToMakeBootableISO
2835fi
2836# cleanup
2837LogIt "$FRIENDLY_OUTSTRING"
2838for mtpt in $FLOPPY_WAS_MOUNTED ; do
2839    mount $mtpt
2840done
2841MindiExit 0
Note: See TracBrowser for help on using the repository browser.