Context Navigation

source: MondoRescue/branches/2.2.8/mindi/mindi @ 2055

Last change on this file since 2055 was 2055, checked in by Bruno Cornec, 12 years ago
Fix a typo introduced since 2.0.0
Property svn:keywords set to `Rev Id`
File size: 100.8 KB

Line
1	#!/bin/bash
2
3	# $Id: mindi 2055 2008-10-26 18:42:38Z bruno $
4	#
5	#-----------------------------------------------------------------------------
6	# mindi - mini-Linux distro based on the user's filesystem & distribution
7	#
8	# Mindi can create a multi-image boot/root kit. The first image is the boot
9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10	# the third disk is data disk #2; and so it goes.
11	#
12	# See http://www.mondorescue.org for details.
13	#-----------------------------------------------------------------------------
14
15	### Which arch are we on (useful for ia64 port)
16	ARCH=`/bin/uname -m`
17
18	ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off"
19
20	MINDI_REV=PBREV
21	MINDI_VER=PBVER
22
23	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
24	MINDI_PREFIX=XXX
25	MINDI_CONF=YYY
26	MINDI_SBIN=${MINDI_PREFIX}/sbin
27	MINDI_LIB=LLL
28
29	# Temporary directory for mindi
30	TMPDIR=/tmp
31
32	EXTRA_SPACE=49152 # increase if you run out of ramdisk space
33	BOOT_SIZE=16384 # size of the boot disk
34
35	PROMPT_MAKE_CD_IMAGE="yes"
36	# Ask if you want to make a CD Image to be written?
37	# if this is set to 'no', then the image will be created automatically
38
39	PROMPT_MAKE_USB_IMAGE="yes"
40	# Ask if you want to make a USB Image to be written?
41	# if this is set to 'no', then the image will be created automatically
42
43	USE_OWN_KERNEL="yes"
44	# If set to "no", you will be prompted for whether or not
45	# you want to use your own kernel, or the supplied default.
46	# If "yes" mindi will automatically use your own kernel.
47
48	MY_FSTAB=/etc/fstab
49	TAPE_MODS="ht st osst ide-tape ide_tape"
50	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi isp megaraid megaraid_mm megaraid_mbox megaraid_sas mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp raw1394 scsi_debug scsi_mod scsi_transport_sas scsi_transport_spi sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule"
51
52	# ide-probe-mod
53	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core edd paride ata_generic ata_piix libata dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_amd pata_marvell pata_serverworks pata_sis amd74xx sis5513"
54	PCMCIA_MODS="pcmcia_core ds yenta_socket"
55	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd usbkbd usbhid keybdev mousedev libusual scsi_mod"
56	NET_MODS="sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 e1000 eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmnet exportfs"
57	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660"
58	# Those modules will only go on the backup media, not the boot media.
59	EXTRA_MODS="$CDROM_MODS vfat fat loop md-mod linear raid0 raid1 xor raid5 raid456 lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm_multipath dm-round-robin dm_round_robin jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache"
60	# Replace with that line for HP OCMP e.g.
61	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu"
62	DENY_MODS="kqemu"
63	# Force some modules to be included
64	FORCE_MODS=""
65
66	LOGFILE=/var/log/mindi.log
67	MINDI_CACHE=/var/cache/mindi
68	BOOT_MEDIA_MESSAGE="\
69	To format and restore all files automatically, type 'nuke' <enter>.\n\
70	To restore some/all files interactively, type 'interactive' <enter>.\n\
71	To compare the archives with your filesystem, type 'compare' <enter>.\n\
72	To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
73	You may add one or more of the following parameters as well:-\n\n\
74	donteject - mondorestore will not eject the CD; this is useful if, for\n\
75	instance, your PC's case has a concealed CD-ROM drive\n\
76	noresize - your mountlist will not be adjusted to use your unallocated\n\
77	hard disk space\n\
78	textonly - do not call any Newt library routines; this is unattractive\n\
79	but valuable if you find your Newt library has bugs in it\n\n\
80	e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
81	a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
82	"
83	FDISK=$MINDI_SBIN/parted2fdisk
84
85	# Using a config file allow to overwrite some values
86	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
87	if [ -f $MINDI_CONFIG ]; then
88	. $MINDI_CONFIG
89	fi
90	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
91	ISO_CMD="/usr/bin/mkisofs"
92	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
93
94	# Now we can create what we need
95	export MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
96
97	# ----------------------------------------------------------------------------
98
99
100	AbortHere() {
101	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
102	Die "Program is terminating in response to signal received from OS/user"
103	}
104
105
106	Aborted() {
107	trap SIGHUP SIGTERM SIGTRAP SIGINT
108	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
109	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
110	Die "User abort."
111	}
112
113
114	AddFileToCfgIfExists() {
115	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
116	}
117
118
119	AddKeyboardMappingFile() {
120	local mappath r included_list included_item i res ii sss
121	mappath=$1
122	KBDEPTH=$(($KBDEPTH+1))
123	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
124	if [ -e "$bigdir/$mappath" ] ; then
125	echo "$mappath already added" >> $LOGFILE
126	return
127	elif [ -d "$bigdir/$mappath" ] ; then
128	echo "Cannot add $mappath: it's a directory. Sorry."
129	return
130	fi
131	echo "Added kbd map $mappath" >> $LOGFILE
132	if [ ! -e "$mappath" ] ; then
133	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
134	if [ ! -e "$mappath" ] ; then
135	LogIt "Cannot add $mappath: kbd map file not found"
136	return
137	fi
138	else
139	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
140	fi
141
142	mkdir -p $bigdir/etc
143	tar cf - $mappath 2>> /dev/null \| (cd $bigdir ; tar xf -) \|\| LogIt "AKMF -- Could not copy $mappath to $bigdir"
144	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
145	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
146	else
147	included_list=`grep -Fi include $mappath \| sed s/'"'// \| sed s/'"'// \| cut -d' ' -f2`
148	fi
149	for included_item in $included_list ; do
150	if [ ! -e "$included_item" ] ; then
151	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
152	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
153	for ii in $sss ; do
154	[ -e "$ii" ] && AddKeyboardMappingFile $ii
155	done
156	else
157	AddKeyboardMappingFile $included_item
158	fi
159	done
160	}
161
162
163	CopyDependenciesToDirectory() {
164	local outdir incoming fname counter d found
165	outdir=$1
166	mkdir -p $outdir
167	incoming=`ReadLine`
168	counter=0
169	while [ "$incoming" != "" ] ; do
170	# Non absolute file names should not arrive till here => skipped
171	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
172	LogIt "Unable to handle $incoming"
173	incoming=`ReadLine`
174	continue
175	fi
176	# no parent directory of incoming should be a link, copy is not possible in that case
177	d=`dirname "$incoming"`
178	found="false"
179	while [ $d != "/" -a $found = "false" ]; do
180	[ -h "$d" ] && found="true"
181	d=`dirname "$d"`
182	done
183	if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
184	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir
185	elif [ -e "$incoming" ] && [ $found = "false" ]; then
186	tar cf - $incoming 2> /dev/null \| (cd $outdir ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?"
187
188	# Only uncompress modules if not using udevd
189	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
190	gunzip -f $outdir/$incoming \|\| LogIt "Cannot gunzip $outdir/$incoming"
191	fi
192	[ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
193	counter=$(($counter+1))
194	if [ "$counter" -ge "5" ] ; then
195	counter=0
196	echo -en "."
197	fi
198	fi
199	incoming=`ReadLine`
200	done
201	}
202
203
204	CountItemsIn() {
205	local r
206	r=0
207	for q in $1 ; do
208	r=$(($r+1))
209	done
210	echo $r
211	}
212
213
214	# Last function called before exiting
215	# Parameter is exit code value
216	MindiExit() {
217	local my_partitions
218
219	echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
220	echo "End date : `date`" >> $LOGFILE
221	if [ _"$MONDO_SHARE" != _"" ] ; then
222	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
223	cat $LOGFILE >> /var/log/mondoarchive.log
224	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
225	fi
226
227	cd /
228	sync&
229
230	# Unmount what could remain mounted
231	my_partitions=`mount \| grep -F $$ \| cut -f1 -d' '`
232	[ "$my_partitions" != "" ] && umount $my_partitions
233	# Clean temporary files only when standalone mindi
234	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
235	rm -Rf $MINDI_TMP
236	fi
237	exit $1
238	}
239
240	Die() {
241	local i
242	if [ "$1" = "" ] ; then
243	LogIt "FATAL ERROR"
244	else
245	LogIt "FATAL ERROR. $1"
246	fi
247
248	LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
249	LogIt "See http://www.mondorescue.org for more information."
250	LogIt "WE CANNOT HELP unless you enclose that file.\n"
251	MindiExit -1
252	}
253
254
255	DropOptimizedLibraries() {
256	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
257	filelist=$1
258	outdir=$2
259
260	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
261	if [ "$list_of_optimized_libraries" = "" ] ; then
262	return 0
263	fi
264	echo -en "Dropping i686-optimized libraries if appropriate"
265	for optimized_lib_name in $list_of_optimized_libraries ; do
266	echo -en "."
267	reason=""
268	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
269	echo "$vanilla_lib_name" >> $filelist
270	resolved=$vanilla_lib_name
271	echo "Adding $resolved to filelist" >> $LOGFILE
272	resolved=`ReadAllLink $resolved`
273	echo "Adding $resolved to filelist" >> $LOGFILE
274	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
275	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
276	ln -sf $vanilla_lib_name $outdir$optimized_lib_name
277	echo "Excluding $optimized_lib_name" >> $LOGFILE
278	grep -Fvx "$optimized_lib_name" "$filelist" > $filelist.tmp
279	echo "Replacing it with $vanilla_lib_name" >> $LOGFILE
280	echo "$vanilla_lib_name" >> $filelist.tmp
281	mv -f $filelist.tmp $filelist
282	done
283	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
284	mv -f $filelist.tmp $filelist
285	echo -e "$DONE"
286	}
287
288
289	FindAndAddUserKeyboardMappingFile() {
290	local r res mapfile mappath included_item included_list keyfile mp locale
291	LogIt "Analyzing your keyboard's configuration."
292	KEYDIR=/lib/kbd
293	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
294	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
295	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
296	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
297	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
298	if [ ! -e "$KEYDIR" ] ; then
299	LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
300	return 0
301	fi
302	if [ -e "/etc/sysconfig/keyboard" ] ; then
303	echo "Red Hat-style config detected." >> $LOGFILE
304	keyfile=/etc/sysconfig/keyboard
305	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
306	echo "Slackware-style config detected." >> $LOGFILE
307	keyfile=/etc/rc.d/rc.keymap
308	elif [ -e "/etc/rc.config" ] ; then
309	echo "Debian-style config detected." >> $LOGFILE
310	keyfile=/etc/rc.config
311	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
312	echo "Debian-style config detected." >> $LOGFILE
313	echo -en "Adding the following keyboard mapping tables: "
314	mkdir -p $bigdir/tmp
315	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
316	KBDEPTH=0
317	mkdir -p $bigdir/etc/console
318	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
319	echo -e "$DONE"
320	return 0
321	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
322	echo "Ubuntu-style config detected." >> $LOGFILE
323	echo -en "Adding the following keyboard mapping tables: "
324	mkdir -p $bigdir/tmp
325	echo "/etc/console-setup/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
326	KBDEPTH=0
327	mkdir -p $bigdir/etc/console-setup
328	cp /etc/console-setup/boottime.kmap.gz $bigdir/etc/console-setup 2>> $LOGFILE
329	echo -e "$DONE"
330	return 0
331	elif [ -e "/etc/conf.d/keymaps" ] ; then
332	echo "Gentoo-style config detected." >> $LOGFILE
333	keyfile=/etc/conf.d/keymaps
334	else
335	echo -en "Searching for rc.config ..."
336	keyfile=`find /etc -name rc.config \| head -n1`
337	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
338	LogIt "Unknown config detected. Default keyboard map will be used."
339	return
340	else
341	echo "Found $keyfile" >> $LOGFILE
342	fi
343	fi
344	if [ ! -e "$KEYDIR/keymaps" ] ; then
345	LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
346	return
347	fi
348	echo "keyfile=$keyfile" >> $LOGFILE
349	locale=`grep -F KEYTABLE "$keyfile" \| tr -d '"' \|cut -d'=' -f2`
350	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
351	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| tr -d '"' \|cut -d'=' -f2` # Gentoo
352	echo "locale=$locale" >> $LOGFILE
353	#
354	# Process the keymaps dir once for all
355	# AddKeyboardMappingFile will use it recursively
356	#
357	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
358	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
359	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
360	# If we have multiple keymaps then log it !!
361	echo "$mp" \| grep -q " "
362	if [ $? -eq 0 ]; then
363	echo "WARNING: Multiple keymaps found: $mp" \| tee -a $LOGFILE
364	echo "The following one will be used" >> $LOGFILE
365	fi
366	for i in $mp ; do
367	mappath=$i
368	[ -e "$i" ] && [ ! -d "$i" ] && break
369	done
370	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
371	mappath=$(find / -name "/kbd/keymaps//$locale")
372	fi
373	echo "mappath = $mappath" >> $LOGFILE
374	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
375	LogIt "Keyboard mapping file not found. Default keyboard map will be used."
376	return
377	fi
378	echo -en "Adding the following keyboard mapping tables: "
379	mkdir -p $bigdir/tmp
380	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
381	KBDEPTH=0
382	AddKeyboardMappingFile $mappath
383	echo -e "$DONE"
384	rm -f $MINDI_TMP/keymaps.find
385	return 0
386	}
387
388
389	FindIsolinuxBinary() {
390	ISOLINUX=/usr/lib/isolinux.bin
391	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
392	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
393	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
394	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
395	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
396	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
397	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.com and click on 'Download'"
398	echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
399	}
400
401
402	FindSpecificModuleInPath() {
403	local modpaths pwd line
404	pwd=`pwd`
405	if [ "$YOUR_KERNEL_SUCKS" ] ; then
406	cd $MINDI_TMP
407	else
408	cd /
409	fi
410	if [ ! -e "$1" ] ; then
411	LogIt "WARNING - cannot search specific path '$1'"
412	return 1
413	fi
414	modpaths=`find $1 -name $2.*o -type f`
415	#[ "$?" -ne "0" ] && Die "find $1 -name $2.o -type f --- failed"
416	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.o.gz -type f`
417	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2.ko.gz -type f`
418	[ "$modpaths" = "" ] && modpaths=`find $1 -name $2 -type f`
419	echo "$modpaths"
420	cd $pwd
421	}
422
423
424	GenerateGiantDependencyList() {
425	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
426
427	echo -en "Analyzing dependency requirements"
428	outfile=$1
429	tempfile=$MINDI_TMP/$$.txt
430	incoming=`ReadLine`
431
432	> $tempfile
433	progress=0
434	res=0
435	noof_lines=$2
436	while [ "$incoming" != "" ] ; do
437	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
438	incoming=`ReadLine`
439	continue
440	fi
441	if [ "$incoming" = "LVMFILES:" ] ; then
442	break
443	fi
444	filelist=`GenerateListForFile "$incoming"`
445	r=$?
446	[ "$r" -ne "0" ] && LogIt "$incoming not found"
447	res=$(($res+$r))
448	# echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
449	for fname in $filelist ; do
450	[ "$fname" != "" ] && echo "$fname" >> $tempfile
451	done
452	progress=$(($progress+1))
453	echo -en "\r\t\t\t\t\t\t\t\t"
454	i=$(($progress*100))
455	i=$(($i/$noof_lines))
456	echo -en "$i"
457	echo -en "%"
458	modres=$(($progress%4))
459	[ "$modres" -eq "0" ] && echo -en "\t/"
460	[ "$modres" -eq "1" ] && echo -en "\t-"
461	[ "$modres" -eq "2" ] && echo -en "\t\\"
462	[ "$modres" -eq "3" ] && echo -en "\t\|"
463	incoming=`ReadLine`
464	done
465	if [ "$incoming" = "LVMFILES:" ] ; then
466	incoming=`ReadLine`
467	lvmversion=""
468	while [ "$incoming" != "" ] ; do
469	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
470	incoming=`ReadLine`
471	continue
472	fi
473	filelist=`GenerateListForFile "$incoming"`
474	for tool in $filelist ; do
475	lvmresolved=`readlink -f $tool`
476	if [ "$tool" = "$lvmresolved" ]; then
477	echo "$tool" >> $tempfile
478	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
479	if [ "$lvmversion" = "" ] ; then
480	lvmversion=`$lvmresolved`
481	echo "$lvmresolved" >> $tempfile
482	fi
483	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
484	if [ "$lvmversion" = "200" ]; then
485	# pvdata and lvmcreate_initrd don't exist in LVM2
486	case "$toolstripped" in
487	"pvdata")
488	continue
489	;;
490	"lvmcreate_initrd")
491	continue
492	;;
493	esac
494	fi
495	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
496	if [ -e "$toolpath" ] ; then
497	echo "$toolpath" >> $tempfile
498	echo "$tool" >> $tempfile
499	else
500	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
501	fi
502	if [ -e "$toolpath" ] ; then
503	echo "$toolpath" >> $tempfile
504	echo "$tool" >> $tempfile
505	else
506	echo "Where are your LVM-Tools? Couldn't find $tool"
507	fi
508	else
509	echo "$tool" >> $tempfile
510	fi
511	done
512	progress=$(($progress+1))
513	echo -en "\r\t\t\t\t\t\t\t\t"
514	i=$(($progress*100))
515	i=$(($i/$noof_lines))
516	echo -en "$i"
517	echo -en "%"
518	modres=$(($progress%4))
519	[ "$modres" -eq "0" ] && echo -en "\t/"
520	[ "$modres" -eq "1" ] && echo -en "\t-"
521	[ "$modres" -eq "2" ] && echo -en "\t\\"
522	[ "$modres" -eq "3" ] && echo -en "\t\|"
523	incoming=`ReadLine`
524	done
525	fi
526	echo -en "$DONE\nMaking complete dependency list"
527
528	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
529	mv -f $tempfile.new $tempfile
530	> $outfile.pre
531	progress=0
532	noof_lines=`cat $tempfile \| wc -l`
533	echo "---------------------------------" >> $LOGFILE
534	echo "List of dependencies: " >> $LOGFILE
535	echo "---------------------------------" >> $LOGFILE
536	for fname in `cat $tempfile` ; do
537	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
538	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
539	progress=$(($progress+1))
540	echo -en "\r\t\t\t\t\t\t\t\t"
541	i=$(($progress*100))
542	i=$(($i/$noof_lines))
543	echo -en "$i"
544	echo -en "%"
545	modres=$(($progress%4))
546	[ "$modres" -eq "0" ] && echo -en "\t/"
547	[ "$modres" -eq "1" ] && echo -en "\t-"
548	[ "$modres" -eq "2" ] && echo -en "\t\\"
549	[ "$modres" -eq "3" ] && echo -en "\t\|"
550	done
551	if [ _"$MONDO_SHARE" != _"" ]; then
552	mkdir -p $bigdir/tmp
553	mkdir -p $bigdir/sbin
554	mkdir -p $bigdir/bin
555	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
556	LogIt "\nIncorporating post-nuke tarball"
557	old_pwd=`pwd`
558	cd $bigdir
559	tar -zxf $MINDI_TMP/post-nuke.tgz \|\| LogIt "Error occurred when untarring post-nuke tarball"
560	cd $old_pwd
561	fi
562	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
563	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
564	else
565	LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
566	LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
567	LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
568	Die "Odd."
569	fi
570	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2> /dev/null \|\| LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
571	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
572	LogIt "\nIncorporating NFS-related settings"
573	for r in NFS-* ISO-PREFIX ; do
574	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
575	echo "Copying $r to ramdisk" >> $LOGFILE
576	done
577	fi
578	fi
579	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
580	rm -f $tempfile $outfile.pre
581	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
582	return $res
583	}
584
585
586	GenerateListForFile() {
587	local files_found loc fname incoming i res
588	incoming="$1"
589	files_found=""
590	res=0
591
592	for fname in $incoming ; do
593	files_found="$files_found `LocateFile $fname`"
594	done
595
596	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
597	}
598
599
600	# Returns all disk devices which are part of a raid array
601	GetAllRaidMembers() {
602	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
603	}
604
605
606	GetFileSizeList() {
607	local i
608	for i in `find $1 -type d -o -print` ; do
609	du -sk $i
610	done
611	}
612
613
614	GetHomeDir() {
615	local res loc
616	loc=`which $1 2>/dev/null`
617	res=`file $loc \| $AWK '{print $NF;}'`
618	dirname $res
619	}
620
621
622	# Check kernel filesystem capabilites for accessing initrd image
623	#
624	# Interface definition:
625	# param #1: absolute path to kernel image
626	GetInitrdFilesystemToUse() {
627
628	# interface test: make sure we have one parameter
629	if [ $# -ne 1 ]; then
630	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
631	fi
632
633	# interface parameters
634	local lvKernelImage=$1
635
636	# local constants (filesystem magic strings)
637	local lcMagicCramfs="<3>cramfs: wrong magic"
638	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
639	local lcMagicInitfs="<6>checking if image is initramfs...\|<6>Unpacking initramfs..."
640
641	# local variables
642	local lvOffset
643	local lvScanRes
644	local lvUseFilesystem
645
646	# say where we are.
647	echo " GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage.\n" >> $LOGFILE
648
649	# verify that file exists
650	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
651
652	# Kernel may be gzip compressed
653	file $lvKernelImage 2>&1 \| grep -q gzip
654	if [ $? -eq 0 ]; then
655	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
656	else
657	# get offet of gzip magic "1f8b0800" in file
658	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}'`
659	[ $lvOffset -eq 0 ] && Die "gzip magic not found in file $lvKernelImage. Terminating."
660	lvOffset=`expr $lvOffset / 2`
661	echo " GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset.\n" >> $LOGFILE
662
663	# scan kernel image for initrd filessystem support
664	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicInitfs"`
665	fi
666
667	# determine which filesystem to use for initrd image: ext2fs, gzip'ed cpio (initramfs ) or cramfs
668	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
669	lvUseFilesystem="ext2fs"
670	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
671	lvUseFilesystem="initramfs"
672	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
673	lvUseFilesystem="cramfs"
674	else
675	lvUseFilesystem="UNSUPPORTED"
676	fi
677
678	# say what we are using
679	echo " GetInitrdFilesystemToUse(): Filesytem to use for initrd is $lvUseFilesystem.\n" >> $LOGFILE
680
681	# return file system to use
682	echo "$lvUseFilesystem"
683
684	}
685
686	# Searches parent raid device of given disk device
687	# $1: disk device (i.e. /dev/hda1)
688	GetParentRaidDev() {
689	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
690	}
691
692
693	# Searches members of raid device
694	# $1: raid device (/dev/md...)
695	GetRaidDevMembers() {
696	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
697	}
698
699
700	HackPathsToFailsafe() {
701	local incoming newpath kver stub i pwd
702	kver=`uname -r`
703	incoming=`ReadLine`
704	pwd=`pwd`
705	cd $MINDI_TMP
706	while [ "$incoming" != "" ] ; do
707	stub=`basename $incoming`
708	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
709	for i in $newpath ; do
710	echo "$i"
711	done
712	read incoming
713	done
714	cd $pwd
715	}
716
717
718	ListAllPartitions() {
719	local res currline partition all_partitions ap_orig remaining i j
720
721	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/fdd\|cdr\|zip\|floppy/ {print $1}'
722	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
723	if [ -e "/vmfs/volumes" ]; then
724	# For VMWare ESX 3 get the device names of these volumes
725	vdf -P \| grep -E '/vmfs/volumes' \| awk '{print $1}'
726	fi
727	return
728	}
729
730
731	ListImagesForUser() {
732	local path fname
733	path=$MINDI_CACHE
734	echo -en "In the directory '$path' you will find the images:-\n"
735	for fname in `ls $path \| grep -F mindi-` ; do
736	printf "%19s " $fname
737	done
738	echo " "
739	}
740
741
742	ListKernelModulePaths() {
743	local module_list module fname oss r kern
744	oss="/root/oss/modules"
745	module_list="$MODULES"
746	# Remove unwanted modules from list
747	for i in $DENY_MODS; do
748	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
749	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
750	done
751	###
752	### Sq-Modification ... Use kernelname for module search path if specified
753	###
754	# kern="`uname -r`"
755	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
756	then
757	kern=${kernelname}
758	else
759	kern="`uname -r`"
760	fi
761	###
762	### Sq-Mod End
763	###
764	for module in $module_list $EXTRA_MODS ; do
765	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
766	echo "module $module --> $r" >> $LOGFILE
767	[ "$r" ] && echo "$r"
768	[ -f "$oss" ] && find $oss \| grep -F $module
769	done
770	find /lib/modules/$kern/modules.* -type f 2> /dev/null
771	[ -f "$oss" ] && find $oss.* 2> /dev/null
772	}
773
774	#
775	# Critical function which computes all dependencies (dyn. lib.)
776	# for a list of binaries
777	#
778	LocateDeps() {
779	local incoming fname deps
780	incoming="$*"
781	for fname in $incoming ; do
782	if [ ! -e "$fname" ] ; then
783	echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
784	if echo $fname \| grep lvm &> /dev/null ; then
785	echo "This warning only affects you if you are using LVM." >> $LOGFILE
786	if echo "$MODULES" \| grep lvm &> /dev/null ; then
787	echo "I think you are, so please take heed!" >> $LOGFILE
788	else
789	echo "I don't think you are, so don't worry about it." >> $LOGFILE
790	fi
791	fi
792	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
793	echo "$fname is softlink" >> $LOGFILE
794	else
795	ldd $fname 2> /dev/null \| ProcessLDD
796	fi
797	done
798	}
799
800
801	# Give all symlinks recursively of a full path name
802	ReadAllLink() {
803	file="$1"
804
805	echo "$file"
806	if [ ! -h $file ]; then
807	return 0
808	fi
809
810	link=`readlink $file`
811	d=`dirname $file`
812	fchar=`echo $link \| cut -c1`
813	# If mother dir is a link print it
814	if [ -h "$d" ]; then
815	echo "$d"
816	d=`readlink $d`
817	fi
818	if [ "$fchar" != "/" ]; then
819	# Relative or local link
820	ReadAllLink "$d/$link"
821	else
822	# Absolute path
823	ReadAllLink $link
824	fi
825	}
826
827
828	LocateFile() {
829	local i path fname_to_find location output resolved tmp stub cache_id loclist
830	fname_to_find="$1"
831	# It's an absolute path
832	if echo "$fname_to_find" \| grep -x "/.*" ; then
833	output="$fname_to_find"
834	if [ -h "$output" ] ; then
835	output="`ReadAllLink $output` $output"
836	fi
837	echo "$output"
838	return 0
839	fi
840	# It's not an absolute path
841	output=""
842	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
843	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
844	[ -h "$path" ] && continue
845	[ ! -e "$path/$fname_to_find" ] && continue
846	output="$path/$fname_to_find $output"
847	if [ -h "$path/$fname_to_find" ] ; then
848	output="`ReadAllLink $path/$fname_to_find` $output"
849	fi
850	done
851	if [ "$output" = "" ] ; then
852	return 1
853	fi
854	echo "$output"
855	return 0
856	}
857
858
859	LogIt() {
860	if [ -e /dev/stderr ] ; then
861	echo -e "$1" >> /dev/stderr
862	elif [ -e /usr/bin/logger ] ; then
863	/usr/bin/logger -s $1
864	fi
865	echo -e "$1" >> $LOGFILE
866	}
867
868
869	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
870	MakeMondoConfigFile() {
871	local outfile use_lzo use_comp use_star
872	outfile=$1
873	> $outfile
874	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
875	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
876	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
877	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
878	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
879	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
880	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
881	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
882	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
883	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
884	echo "use-lzo $use_lzo" >> $outfile
885	echo "use-gzip $use_gzip" >> $outfile
886	echo "use-star $use_star" >> $outfile
887	echo "use-comp $use_comp" >> $outfile
888	echo "datestamp `date`" >> $outfile
889	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
890	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-IPADDR nfs-client-ipaddr $outfile
891	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-NETMASK nfs-client-netmask $outfile
892	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-BROADCAST nfs-client-broadcast $outfile
893	AddFileToCfgIfExists $MINDI_TMP/NFS-CLIENT-DEFGW nfs-client-defgw $outfile
894	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-MOUNT nfs-server-mount $outfile
895	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-PATH nfs-server-path $outfile
896	AddFileToCfgIfExists $MINDI_TMP/NFS-DEV nfs-dev $outfile
897	AddFileToCfgIfExists $MINDI_TMP/NFS-SERVER-IPADDR nfs-server-ipaddr $outfile
898	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
899	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
900	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
901	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
902	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
903	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
904	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
905	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
906	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
907	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
908	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
909	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
910	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
911	}
912
913
914	MakeMountlist() {
915	local scratchdir mountlist all_partitions current_partition \
916	partition_size partition_format outstring partition_number \
917	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
918	absolute_partition old_partition_fmt current_lvolume uname skip
919
920	echo "Your raw fstab file looks like this:" >> $LOGFILE
921	echo "------------------------------------" >> $LOGFILE
922	cat $MY_FSTAB >> $LOGFILE
923	echo "Your mountlist will look like this:" \| tee -a $LOGFILE
924	echo "-----------------------------------" >> $LOGFILE
925
926	# scratchdir, mountlist(OUT)
927	scratchdir=$MINDI_TMP
928	mountlist=$1
929
930	# NB: partition = device
931	# NB: mountpt = where the device is mounted
932
933	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
934
935	[ "$mountlist" != "" ] && rm -Rf $mountlist
936	> $mountlist
937	all_partitions=""
938
939	if [ $LVM != "false" ]; then
940	echo -en "Analyzing LVM...\n"
941	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
942	if [ $? -ne 0 ]; then
943	LVM="false"
944	fi
945	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-32`
946	fi
947	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
948	# echo "all partitions = $all_partitions" > /dev/stderr
949	for i in $IMAGE_DEVS ; do
950	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
951	done
952	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
953	printf " %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID \| tee -a $LOGFILE
954	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1"
955	for c_p in $all_partitions ; do
956	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] && continue
957	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
958	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
959	current_partition=`readlink -f $c_p`
960	[ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
961	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
962	else
963	current_partition="$c_p"
964	fi
965	[ "$c_p" = "none" ] && continue
966	redhat_label=""
967	label=""
968	uuid=""
969	absolute_partition=`readlink -f $c_p`
970	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
971
972	# Detects noauto partitions not mounted and exclude them
973	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$current_partition" \| /bin/grep -vx " #." \| $AWK '{print $4}' \| head -n1`
974	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
975	continue
976	fi
977
978	# set default in case we dont't find it
979	str_to_find_fmt_with=$current_partition
980
981	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
982	# current_partition contains only first column of /etc/fstab
983	if [ "`echo "$current_partition" \| /bin/grep -i "LABEL="`" != "" ]; then
984	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
985	actual_dev=""
986
987	# 1st try, findfs - the RHEL way of finding labels and their partitions
988	if [ -x "/sbin/findfs" ]; then
989	actual_dev=`/sbin/findfs LABEL=${redhat_label} 2> /dev/null`
990	fi
991
992	# 2nd try : blkid, the good way for all LABEL except swap
993	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
994	actual_dev=`/sbin/blkid \| /bin/grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
995	# For LVM FS it will give a /dev/dm-# which should then be converted
996	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
997	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
998	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
999	for dev in `ls /dev/mapper/*`; do
1000	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1001	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1002	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1003	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1004	break
1005	fi
1006	done
1007	fi
1008	fi
1009
1010	# 3rd try, which works on a standard partition (ext2/3), but not on swap
1011	# For LVM gives a /dev/mapper entry
1012	if [ "x$actual_dev" = "x" ]; then
1013	actual_dev=`/bin/mount -l \| /bin/grep "\[$redhat_label\]" \| cut -d' ' -f1`
1014	fi
1015
1016	# 4th try, with vol_id
1017	# SWAP only
1018	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1019	list_swaps=`cat /proc/swaps \| /bin/grep "/dev/" \| $AWK '{ print $1 }' `
1020	for dev_swap in $list_swaps ; do
1021	dev_exists=`/sbin/vol_id $dev_swap \| /bin/grep "$redhat_label"`
1022	if [ "x$dev_exists" != "x" ]; then
1023	actual_dev=$dev_swap
1024	break;
1025	fi
1026	done
1027	fi
1028
1029	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1030	# LABEL=SW-cciss/c0d0p3 (RDP)
1031	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1032	# SWAP only
1033	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| /bin/grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
1034	skip=""
1035	uname="`uname -r`"
1036	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
1037	# 2.6.12 needs 16 (FC3)
1038	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
1039	# 2.6.19 and upper needs 1052
1040	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
1041	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
1042	if [ $skip = "" ]; then
1043	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1044	fi
1045	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
1046	do
1047	# Location of the swap label for kernel 2.6
1048	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1049	if [ "x$try_dev_label" = "x$redhat_label" ]; then
1050	actual_dev=$try_dev
1051	fi
1052	done
1053	fi
1054
1055	# Check if one of all those tries has known success
1056	if [ "x$actual_dev" != "x" ]; then
1057	current_partition=$actual_dev
1058	else
1059	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1060	fi
1061	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
1062	# current_partition contains only first column of /etc/fstab
1063	elif [ "`echo "$current_partition" \| /bin/grep -i "UUID="`" != "" ]; then
1064	uuid=`echo "$current_partition" \| cut -d'=' -f2`
1065	actual_dev=""
1066
1067	# 1st try, findfs - the RHEL way of finding labels and their partitions
1068	if [ -x "/sbin/findfs" ]; then
1069	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1070	fi
1071
1072	# 2nd try : blkid, the good way for all UUID except swap
1073	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1074	actual_dev=`/sbin/blkid \| /bin/grep "$uuid" \| grep UUID= \| cut -d':' -f1`
1075	# For LVM FS it will give a /dev/dm-# which should then be converted
1076	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1077	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1078	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1079	for dev in `ls /dev/mapper/*`; do
1080	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1081	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1082	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1083	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1084	break
1085	fi
1086	done
1087	fi
1088	fi
1089
1090	# 3th try, with vol_id
1091	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1092	list_dev=`mount \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
1093	for dev in $list_dev ; do
1094	dev_exists=`/sbin/vol_id $dev \| /bin/grep "$uuid"`
1095	if [ "x$dev_exists" != "x" ]; then
1096	actual_dev=$dev
1097	break;
1098	fi
1099	done
1100	fi
1101
1102	# 4th try, with dumpuuid (VMWare only ?) for swap
1103	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1104	list_dev=`cat /proc/swaps \| /bin/grep -E '^/' \| $AWK '{ print $1 }' `
1105	for dev in $list_dev ; do
1106	dev_exists=`/sbin/dumpuuid $dev \| /bin/grep "$uuid"`
1107	if [ "x$dev_exists" != "x" ]; then
1108	actual_dev=$dev
1109	break;
1110	fi
1111	done
1112	fi
1113
1114	# Check if one of all those tries has known success
1115	if [ "x$actual_dev" != "x" ]; then
1116	current_partition=$actual_dev
1117	else
1118	Die "Your system uses a UUID partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1119	fi
1120	else
1121	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1122	# they use symlinks in fstab unrelated to what is shown in mount !
1123	if [ _"$partition_mountpt" = _"" ]; then
1124	# set default in case we dont't find it
1125	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -Ev "^#" \| $AWK '{print $1}'`; do
1126	if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1127	str_to_find_fmt_with=$tmpp
1128	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| /bin/grep -w "$tmpp" \| /bin/grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1129	break;
1130	fi
1131	done
1132	fi
1133	fi
1134
1135	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1136	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1137	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1138	# the former is then a link to the latter, so we test whether
1139	# $current_partition is actually such a link or not and set
1140	# $current_lvolume accordingly. On Debian you may find more than one answer
1141	# so we remove the one corresponding to /dev/.static
1142	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1143	# principle is the same and we need to find the link to it as well.
1144	# Note that $current_lvolume may well be an
1145	# ordinary device. It is just to make sure that we feed the right value
1146	# into any of the LVM tools if possible.
1147
1148	current_lvolume="$current_partition"
1149	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
1150	# .static dir are a Debian specificity
1151	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
1152	echo $current_lvolume \| grep -q ' '
1153	if [ $? -eq 0 ]; then
1154	echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE
1155	fi
1156	fi
1157	#
1158	# End of LVM device style variation code (other than $current_lvolume).
1159
1160	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1161	# Size computed via LVM not directly
1162	partition_size="lvm"
1163	else
1164	partition_size=`SizeOfPartition $current_partition`
1165	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
1166	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
1167	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
1168	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition" \| $AWK '{print $3}'`
1169	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1170	[ "$partition_format" != "swap" ] && partition_format="swap"
1171	if [ "$partition_size" = "" ] ; then
1172	totalsize=0
1173	items=0
1174	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
1175	totalsize=$(($totalsize+$i))
1176	items=$(($items+1))
1177	done
1178	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
1179	[ "$partition_size" -lt "125000" ] && partition_size=125000
1180	echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1181	fi
1182	fi
1183	fi
1184	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
1185	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
1186	if [ "$partition_mountpt" = "" ] ; then
1187	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1188	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1189	partition_mountpt="raid"
1190	partition_format="raid"
1191	else
1192	partition_mountpt="lvm"
1193	partition_format="lvm"
1194	fi
1195	fi
1196	fi
1197	psz=$partition_size
1198	echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1199	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
1200	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
1201	partition_mountpt="image"
1202	old_partition_fmt=$partition_format
1203	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
1204	partition_size=$(($partition_size+1)); # just in case
1205	if [ "$partition_format" = "Linux" ] ; then
1206	echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1207	echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1208	partition_format=$old_partition_fmt
1209	fi
1210	fi
1211	if [ "$EXCLUDE_DEVS" ] && [ "`echo " $EXCLUDE_DEVS " \| grep -F " $current_partition "`" ] \|\| [ "`echo " $EXCLUDE_DEVS " \| grep " $current_partition "`" ] ; then
1212	echo "Excluding $current_partition from mountlist" >> $LOGFILE
1213	continue
1214	fi
1215	if [ ! "$partition_mountpt" ] ; then
1216	echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1217	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
1218	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
1219	[ "$partition_format" ] && break
1220	done
1221	echo "------- $FDISK log end ------------" >> $LOGFILE
1222	if [ "$partition_format" = "Compaq diagnostics" ] ; then
1223	partition_format="compaq"
1224	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1225	LogIt "Unable to find mountpoint of $current_partition - ignoring"
1226	continue
1227	fi
1228	fi
1229	if [ "$redhat_label" ]; then
1230	label="$redhat_label"
1231	elif [ "$uuid" ]; then
1232	label="$uuid"
1233	fi
1234	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1235	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1236	unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1237	if [ "$current_partition" = "" ] ; then
1238	echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1239	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1240	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
1241	partition_mountpt=raid
1242	partition_format=raid
1243	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1244	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1245	else
1246	echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1247	fi
1248	elif [ "$partition_format" = "" ] ; then
1249	echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1250	elif [ "$partition_size" = "" ] ; then
1251	echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1252	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
1253	continue
1254	else
1255	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
1256	echo "Stupid bastard..." >> $LOGFILE
1257	partition_format="vfat"
1258	fi
1259	printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1260	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1261	fi
1262	done
1263	}
1264
1265
1266	MakeSureNumberIsInteger() {
1267	res=`echo "$1" \| tr -s '\-[0-9]' ' '`
1268	if [ "$res" != " " ] && [ "$res" != "" ] ; then
1269	echo "result = '$res'"
1270	Die "$1 should be an integer"
1271	fi
1272	}
1273
1274
1275	OfferToMakeBootableISO() {
1276	local i old_pwd
1277	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1278	echo -en "Shall I make a bootable CD image? (y/[n]) "
1279	read i
1280	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1281	fi
1282	if [ _"$MINDI_TMP" = _"" ]; then
1283	Die "MINDI_TMP undefined"
1284	fi
1285	rm -Rf $MINDI_TMP/iso
1286	mkdir -p $MINDI_TMP/iso/{images,archives}
1287	cp -f $MINDI_CACHE/.gz $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/.gz to $MINDI_TMP/iso/images"
1288	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1289	for i in memdisk memtest.bin memtest.img ; do
1290	j=$MINDI_LIB/$i
1291	k=$MINDI_TMP/iso
1292	if [ -e "$j" ] ; then
1293	LogIt "Copying $j to $k"
1294	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
1295	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
1296	if [ _"$MONDO_SHARE" != _"" ]; then
1297	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
1298	fi
1299	fi
1300	done
1301	MakeMessageFile > $MINDI_TMP/iso/message.txt
1302	cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1303	cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1304	if [ _"$MONDO_SHARE" != _"" ]; then
1305	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1306	cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1307	fi
1308	MakeBootConfFile syslinux > $MINDI_TMP/iso/isolinux.cfg
1309	if [ "$ARCH" != "ia64" ] ; then
1310	cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2> /dev/null \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1311	fi
1312	old_pwd=`pwd`
1313	cd $MINDI_TMP/iso
1314	if [ "$ARCH" != "ia64" ] ; then
1315	if [ _"$MONDO_SHARE" != _"" ]; then
1316	cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2> /dev/null \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1317	cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1318	fi
1319	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1320	else
1321	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1322	rm -f images/mindi-bootroot.$BOOT_SIZE.img
1323	fi
1324	if [ "$?" -ne "0" ] ; then
1325	echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1326	cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1327	echo "$ISO_CMD returned the following errors:-"
1328	cat $MINDI_TMP/mkisofs.log
1329	LogIt "Failed to create ISO image."
1330	else
1331	echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" \| tee -a $LOGFILE
1332	fi
1333	rm -f $MINDI_TMP/mkisofs.log
1334	cd $old_pwd
1335	}
1336
1337
1338	OfferToMakeBootableUSB() {
1339	local i
1340	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1341	echo -n "Shall I make a bootable USB image ? (y/[n]) "
1342	read i
1343	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1344	if [ "$USBDEVICE" = "" ]; then
1345	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1346	read dev
1347	USBDEVICE=$dev
1348	fi
1349	echo "WARNING: This will erase all content on $USBDEVICE"
1350	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1351	read i
1352	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1353	fi
1354	if [ _"$MINDI_TMP" = _"" ]; then
1355	Die "MINDI_TMP undefined"
1356	fi
1357	rm -Rf $MINDI_TMP/usb
1358	mkdir -p $MINDI_TMP/usb
1359	USBPART="${USBDEVICE}1"
1360
1361	echo -en "Transforming $USBDEVICE in a Bootable device "
1362	echo -en "."
1363	echo "Transforming $USBDEVICE in a Bootable device" >> $LOGFILE
1364	echo "Checking $USBDEVICE" >> $LOGFILE
1365	$FDISK -l $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE
1366	if [ $? -ne 0 ]; then
1367	echo "Unable to access $USBDEVICE" \| tee -a $LOGFILE
1368	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
1369	exit -1
1370	fi
1371	echo -en "."
1372	echo "Unmounting $USBDEVICE just in case" >> $LOGFILE
1373	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1374	echo "Erasing $USBDEVICE" >> $LOGFILE
1375	dd if=/dev/zero of=$USBDEVICE bs=1k count=4096 >> $LOGFILE 2>> $LOGFILE
1376	echo "Preparing $USBDEVICE" >> $LOGFILE
1377	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE << EOF
1378	n
1379	p
1380	1
1381
1382
1383	t
1384	b
1385	a
1386	1
1387	w
1388	EOF
1389	if [ $? -ne 0 ]; then
1390	echo "Unable to create a vfat Filesystem on $USBDEVICE" \| tee -a $LOGFILE
1391	echo "Make sure your USB device is pluged in" \| tee -a $LOGFILE
1392	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1393	MindiExit -1
1394	fi
1395	echo -en "."
1396	echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1397	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1398	if [ $? -ne 0 ]; then
1399	echo "Unable to create a vfat filesystem on $USBPART" \| tee -a $LOGFILE
1400	echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" \| tee -a $LOGFILE
1401	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1402	MindiExit -1
1403	fi
1404	echo -en "."
1405	echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1406	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1407	if [ $? -ne 0 ]; then
1408	echo "Unable to mount $USBPART on $MINDI_TMP/usb" \| tee -a $LOGFILE
1409	echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" \| tee -a $LOGFILE
1410	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1411	MindiExit -1
1412	fi
1413	echo -en "."
1414	mkdir -p $MINDI_TMP/usb/images
1415	cp -f $MINDI_CACHE/.img $MINDI_CACHE/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1416	echo -en "."
1417	echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1418	for i in memdisk memtest.bin memtest.img ; do
1419	j=$MINDI_LIB/$i
1420	k=$MINDI_TMP/usb
1421	if [ -e "$j" ] ; then
1422	LogIt "Copying $j to $k"
1423	cp -f $j $k 2> /dev/null \|\| Die "Failed to copy $j to $k"
1424	cp -f $j $MINDI_TMP 2> /dev/null \|\| Die "Failed to copy $j to $MINDI_TMP"
1425	fi
1426	done
1427	echo -en "."
1428	MakeMessageFile > $MINDI_TMP/usb/message.txt
1429	echo -en "."
1430	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2> /dev/null \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1431	echo -en "."
1432	cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1433	echo -en "."
1434	MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1435	echo -en "."
1436	umount $MINDI_TMP/usb
1437	if [ "$ARCH" != "ia64" ] ; then
1438	syslinux $USBPART 2>> $MINDI_TMP/syslinux.log
1439	if [ "$?" -ne "0" ] ; then
1440	echo "----------- syslinux's errors --------------" \|tee -a $LOGFILE
1441	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
1442	LogIt "Failed to create USB image."
1443	else
1444	echo -e "$DONE"
1445	echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1446	fi
1447	rm -f $MINDI_TMP/syslinux.log
1448	else
1449	echo "No USB boot support for ia64" \| tee -a $LOGFILE
1450	MindiExit -1
1451	fi
1452	echo -en "."
1453	}
1454
1455
1456	MakeMessageFile() {
1457	iss="/dev/null"
1458	[ -e /etc/issue ] && iss="/etc/issue"
1459	[ -e /etc/issue.net ] && iss="/etc/issue.net"
1460	if [ "`grep -Fi "debian" $iss 2> /dev/null`" ] ; then
1461	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s%DDDDD%"Debian GNU\/`uname -s` `cut -d ' ' -f 3 $iss` `hostname`"% \| sed s/KKKKK/"Kernel `uname -r` on a `uname -m`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
1462	else
1463	sed s/ZZZZZ/$MINDI_VERSION/ $MINDI_LIB/msg-txt \| sed s/YYYYY/"Mondo Rescue"/ \| sed s/XXXXX/"a cousin of"/ \| sed s/DDDDD/"`grep -i "linux" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/KKKKK/"`grep -i "kernel" $iss \| sed s~/~~ \| head -n1 \| tr -s ' ' ' '`"/ \| sed s/TTTTT/"`LC_TIME=C date`"/ \| sed s/' 'r' 'on' 'an' 'm/' '`uname -r`' 'on' 'an' '`uname -m`/ \| sed s/%r/"`uname -r`"/ \| sed s/%t/"`hostname`"/
1464	fi
1465	if [ _"$MONDO_SHARE" != _"" ]; then
1466	if [ "$CDRECOVERY" != "yes" ] ; then
1467	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1468	echo -en "Press <enter> to continue.\n"
1469	elif [ ! "$MINDI_TMP" ] ; then
1470	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1471	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1472	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1473	fi
1474	else
1475	echo -en "$BOOT_MEDIA_MESSAGE"
1476	fi
1477	else
1478	echo -en "\
1479	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1480	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1481	fi
1482	fi
1483	echo -en "\n\n\n"
1484	}
1485
1486
1487	MakeBootConfFile() {
1488	local options i ooo
1489	options=""
1490	# Type of boot file (elilo or syslinux/isolinux)
1491	type=$1
1492	if [ "$type" = "elilo" ]; then
1493	sep="="
1494	else
1495	sep=" "
1496	fi
1497
1498	# Generic header for conf file
1499	if [ "$type" != "elilo" ] ; then
1500	echo -en "prompt 1\ndisplay message.txt\n"
1501	else
1502	echo -en "prompt\n"
1503	fi
1504
1505	# Compute which default option to boot from
1506	if [ "$CDRECOVERY" = "yes" ] ; then
1507	echo -en "default${sep}RESTORE\n"
1508	# In case it's mondoarchive
1509	elif [ _"$MONDO_SHARE" != _"" ]; then
1510	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1511	echo -en "default${sep}iso\n"
1512	else
1513	echo -en "default${sep}interactive\n"
1514	fi
1515	else
1516	echo -en "default${sep}expert\n"
1517	fi
1518
1519	# Handle timeout
1520	if [ "$CDRECOVERY" != "yes" ] ; then
1521	echo -en "timeout${sep}300\n"
1522	else
1523	echo -en "timeout${sep}10000\n"
1524	fi
1525	echo -en "\n"
1526
1527	# prepare which labels will be generted
1528	if [ "$CDRECOVERY" = "yes" ] ; then
1529	options="RESTORE expert"
1530	else
1531	if [ _"$MONDO_SHARE" != _"" ]; then
1532	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
1533	options="iso"
1534	else
1535	options="interactive expert compare iso nuke isonuke"
1536	fi
1537	else
1538	options="expert"
1539	fi
1540	fi
1541
1542	# Generate rest of conf file
1543	for i in $options ; do
1544	ooo=$i
1545	[ "$ooo" = "RESTORE" ] && ooo="nuke"
1546	if [ "$type" = "elilo" ]; then
1547	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo_mode $ADDITIONAL_BOOT_PARAMS \"\n"
1548	else
1549	outstr="label $i\n\tkernel /vmlinuz\n\tappend initrd=/initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo}_mode $ADDITIONAL_BOOT_PARAMS\n"
1550	fi
1551	echo -en "$outstr"
1552	done
1553
1554	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1555	if [ "$type" = "elilo" ]; then
1556	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1557	echo -en "image=/memdisk\n\tlabel=memtest\nappend=\"initrd=memtest.img\"\n"
1558	else
1559	echo -en "label memtest\n\tkernel /memtest.bin\n"
1560	echo -en "label=memtest\n\tkernel /memdisk\nappend initrd=memtest.img\n"
1561	fi
1562	fi
1563	}
1564
1565
1566	PrepareBootDiskImage_LILO() {
1567	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1568	imagesdir=$MINDI_CACHE
1569	kernelpath=$1
1570
1571	retval=0
1572	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1573	echo -en "Making "$BOOT_SIZE"KB boot disk..."
1574	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1575	echo -en "..."
1576	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1577	mountpoint=$MINDI_TMP/mountpoint.$$
1578	mkdir -p $mountpoint
1579	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
1580	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1581	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
1582	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1583	mkdir -p $mountpoint/etc
1584	liloconf=$mountpoint/elilo.conf
1585
1586	MakeBootConfFile elilo > $liloconf
1587
1588	# Copy it so that CD-ROM menu entry is satisfied
1589	mountefi=0
1590	df -T \| grep /boot/efi \| grep -q vfat
1591	if [ $? -ne 0 ]; then
1592	mount /boot/efi
1593	if [ $? -ne 0 ]; then
1594	echo "You have to mount your EFI partition when using mindi"
1595	MindiExit -1
1596	fi
1597	mountefi=1
1598	fi
1599	el=`find /boot/efi -name elilo.efi`
1600	cp $el $mountpoint
1601	cp $liloconf $mountpoint
1602	if [ $mountefi -eq 1 ]; then
1603	umount /boot/efi 2>&1 > /dev/null
1604	fi
1605
1606	echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
1607	cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1608	if [ "$?" -ne "0" ] ; then
1609	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1610	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1611	LogIt "Please unload some of your modules and try again."
1612	rm -f $MINDI_TMP/mtpt.$$
1613	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1614	retval=$(($retval+1))
1615	fi
1616	MakeMessageFile > $mountpoint/message.txt
1617
1618	mkdir -p $mountpoint/tmp
1619	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1620	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1621	fi
1622
1623	# copy the kernel across
1624	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1625	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1626	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1627	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2> /dev/null
1628	if [ "$?" -ne "0" ] ; then
1629	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1630	du -sk $mountpoint/* >> $LOGFILE
1631	echo "--- end of list of files ---" >> $LOGFILE
1632	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
1633	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1634	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1635	cd $old_pwd
1636	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1637	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1638	# losetup /dev/loop0 -d
1639	[ "$imagefile" != "" ] && rm -f $imagefile
1640	return 0
1641	fi
1642	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1643	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
1644	echo "Free space left on image = $free_space KB" >> $LOGFILE
1645	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1646	# make it bootable
1647	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1648	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1649	if [ "$KERN_DISK_MADE" ] ; then
1650	echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1651	fi
1652
1653	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1654	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1655	echo -en "..."
1656	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1657	if [ "$retval" -eq "0" ] ; then
1658	echo -en "...$DONE\n"
1659	if [ "$KERN_DISK_MADE" ] ; then
1660	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1661	fi
1662	else
1663	echo -en "...failed\n"
1664	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1665	[ "$imagefile" != "" ] && rm -f $imagefile
1666	fi
1667	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1668	return $retval
1669	}
1670
1671
1672	PrepareBootDiskImage_SYSLINUX() {
1673	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1674	imagesdir=$MINDI_CACHE
1675	kernelpath=$1
1676	do_boot_root_thingy=""
1677	local retval old_pwd
1678	retval=0
1679
1680	[ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1681	echo -en "Making "$BOOT_SIZE"KB boot disk..."
1682	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1683	echo -en "..."
1684	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1685	mountpoint=$MINDI_TMP/mountpoint.$$
1686	mkdir -p $mountpoint
1687	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
1688	echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1689	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1690	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1691
1692	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "Cannot mount (PBDI)"
1693
1694	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1695	MakeMessageFile > $mountpoint/message.txt
1696	MakeBootConfFile syslinux > $mountpoint/syslinux.cfg
1697	echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
1698	cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1699	if [ "$?" -ne "0" ] ; then
1700	LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1701	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1702	LogIt "Please unload some of your modules and try again."
1703	rm -f $MINDI_TMP/mtpt.$$
1704	LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1705	retval=$(($retval+1))
1706	fi
1707
1708	mkdir -p $mountpoint/tmp
1709	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1710	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1711	fi
1712
1713	# copy the kernel across
1714	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1715	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1716	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1717	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1718	if [ "$?" -ne "0" ] ; then
1719	echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1720	du -sk $mountpoint/* >> $LOGFILE
1721	echo "--- end of list of files ---" >> $LOGFILE
1722	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n\
1723	Sorry, your kernel is too big for your image.\n" >> $LOGFILE
1724	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1725	cd $old_pwd
1726	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1727	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1728
1729	[ "$imagefile" != "" ] && rm -f $imagefile
1730	return 0
1731	fi
1732	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1733	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
1734	echo "Free space left on image = $free_space KB" >> $LOGFILE
1735	echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1736
1737	# make it bootable
1738	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1739	mkdir -p $mountpoint/etc
1740	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1741	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1742	echo -en "..."
1743	rmdir $mountpoint \|\| LogIt "Cannot rmdir (PBDI)"
1744
1745	if [ "$retval" -eq "0" ] ; then
1746	echo -en "...$DONE\n"
1747	if [ "$KERN_DISK_MADE" ] ; then
1748	[ "$imagefile" != "" ] && rm -f $imagefile
1749	LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1750	fi
1751	else
1752	echo -en "...failed\n"
1753	LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1754	[ "$imagefile" != "" ] && rm -f $imagefile
1755	fi
1756	[ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1757	return $retval
1758	}
1759
1760
1761	ParseModprobeForIncludes() {
1762	local MODPROBE_CONF mpincfile includes include
1763
1764	MODPROBE_CONF=/etc/modprobe.conf
1765	mpincfile=$1
1766	touch $mpincfile
1767	if [ -a $MODPROBE_CONF ]; then
1768	includes=$(awk '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort\|uniq)
1769	if [ -n "$includes" ]; then
1770	for include in $includes
1771	do
1772	if [ -a "$include" ]; then
1773	echo $include >> $mpincfile
1774	fi
1775	done
1776	fi
1777	fi
1778	}
1779
1780
1781	PrepareDataDiskImages() {
1782	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
1783
1784	imagesdir=$MINDI_CACHE
1785	rm -f $imagesdir/mindi.iso
1786	needlist=$MINDI_TMP/what-we-need.txt
1787	bigdir=$MINDI_TMP/bigdir
1788	mkdir -p $bigdir/usr/bin
1789	mkdir -p $bigdir/usr/sbin
1790	includefile=$MINDI_TMP/$$.includefile.txt
1791
1792	lfiles="$DEPLIST_FILE"
1793	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
1794	ParseModprobeForIncludes $includefile
1795	lines=$(($lines+`cat $includefile \| wc -l`))
1796	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
1797	res=$?
1798	rm -f $includefile
1799	if [ "$YOUR_KERNEL_SUCKS" ]; then
1800	pwd=`pwd`
1801	cd $MINDI_TMP
1802	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
1803	tar cf - ./$i 2>> $LOGFILE \| (cd $bigdir ; tar xf -) \|\| Die "PDDI can't copy $i->$bigdir"
1804	done
1805	for i in $EXTRA_MODS ; do
1806	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
1807	[ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
1808	for k in $j ; do
1809	tar cf - $k 2>> $LOGFILE \| (cd $bigdir ; tar xf -)
1810	echo "Added failsafe module $k to ramdisk" >> $LOGFILE
1811	done
1812	done
1813	cd $pwd
1814	else
1815	ListKernelModulePaths >> $needlist
1816	fi
1817	if [ "$res" -ne "0" ] ; then
1818	Die "You have $res files present in dependency list\nbut absent from filesystem."
1819	fi
1820	FindAndAddUserKeyboardMappingFile
1821	mkdir -p $bigdir/tmp
1822	if [ _"$MONDO_SHARE" != _"" ]; then
1823	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
1824	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
1825	fi
1826	[ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
1827	DropOptimizedLibraries $needlist $bigdir
1828	echo -en "Assembling dependency files"
1829	CopyDependenciesToDirectory < $needlist $bigdir
1830
1831	# also copy io.sys and msdos.sys, if we can find them
1832	for i in `mount \| cut -d' ' -f3` ; do
1833	for j in io.sys msdos.sys ; do
1834	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
1835	done
1836	done
1837
1838	# master boot record, too
1839	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
1840	if [ "$i" ] ; then
1841	LogIt "Backing up $i's MBR"
1842	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
1843	sleep 1
1844	sync
1845	j=$i
1846	[ -h "$j" ] && j=`readlink -f $j`
1847	LogIt "Creating /dev/boot_device ($j)"
1848	mkdir -p $bigdir/dev
1849	cp -pRdf $j $bigdir/dev/boot_device 2> /dev/null \|\| Die "Unable to create /dev/boot_device on ramdisk"
1850	fi
1851
1852	old_pwd=`pwd`
1853	cd $bigdir
1854
1855	# Get terminfo content
1856	ti="usr/share/terminfo/l"
1857	if [ -d /$ti ]; then
1858	mkdir -p $ti
1859	cp -Rdf /$ti/* $ti 2>> $LOGFILE \|\| LogIt "WARNING - error occurred while copying terminfo"
1860	fi
1861	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
1862	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
1863	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
1864	fi
1865	[ -d "/lib/dev-state" ] && tar cf - /lib/dev-state 2>> $LOGFILE \| tar xf -
1866	cd $old_pwd
1867	echo -e "$DONE"
1868	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
1869	MakeMountlist $MINDI_TMP/mountlist.txt
1870	mkdir -p $bigdir/tmp
1871	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2> /dev/null \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
1872	if [ _"$MONDO_SHARE" != _"" ]; then
1873	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
1874	fi
1875	if [ $LVM != "false" ]; then
1876	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
1877	if [ "$?" -ne "0" ]; then
1878	LVM="false"
1879	rm -f $bigdir/tmp/i-want-my-lvm
1880	fi
1881	fi
1882	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
1883	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2> /dev/null
1884	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2> /dev/null
1885	if [ _"$MONDO_SHARE" != _"" ]; then
1886	for q in filelist.full.gz biggielist.txt ; do
1887	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
1888	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
1889	done
1890	fi
1891
1892	echo -en "Tarring and zipping the data content..."
1893	size_of_all_tools=`du -sk $bigdir \| cut -f1`
1894	(cd $bigdir ; tar -b 4096 -cf - . 2> /dev/null \| gzip -9 > $imagesdir/all.tar.gz)
1895	du -sk $imagesdir/*gz >> $LOGFILE
1896	echo -e "$DONE"
1897
1898	FRIENDLY_OUTSTRING="Boot and data disk images were created."
1899	rm -rf $bigdir
1900	rm -f $needlist
1901	}
1902
1903
1904	ProcessLDD() {
1905	local incoming f d nd bd bnd
1906	read incoming
1907	while [ "$incoming" != "" ]; do
1908	# We take the full path name of the dyn. lib. we want
1909	incoming=`echo "$incoming" \| awk '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
1910	for f in $incoming ; do
1911	# echo modified file name if one of the parent dir is a link
1912	# by replacing the original dirname by the destination of the link
1913	d="`dirname $f`"
1914	found="false"
1915	while [ "$d" != "/" ]; do
1916	if [ -h "$d" ]; then
1917	nd=`readlink -f $d`
1918	bd=`basename $d`
1919	bnd=`basename $nd`
1920	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
1921	echo $d
1922	fi
1923	d="`dirname $d`"
1924	done
1925
1926	echo "$f"
1927	echo "`ReadAllLink $f`"
1928	done
1929	read incoming
1930	done
1931	}
1932
1933
1934	Prompt() {
1935	echo -en "$1"
1936	read line
1937	}
1938
1939
1940	ReadLine() {
1941	local i incoming
1942	read incoming
1943	i=0
1944	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
1945	i=$(($i+1))
1946	read incoming
1947	done
1948	echo "$incoming"
1949	}
1950
1951
1952	SizeOfPartition() {
1953	local devpath drive res stub
1954	device=$1
1955	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
1956	res=`SizeOfRaidPartition $device`
1957	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
1958	echo "$res"
1959	return 0
1960	fi
1961	# patch from Bill <bill@iwizard.biz> - 2003/08/25
1962	res=`$FDISK -s $device 2>> $LOGFILE`
1963	# end patch
1964	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2`
1965	[ "$res" = "" ] && res="-1"
1966	echo $res
1967	return 0
1968	}
1969
1970
1971	SizeOfRaidPartition() {
1972	local real_dev smallest_size silly tmp
1973
1974	silly=999999999
1975	smallest_size=$silly
1976
1977	for real_dev in `GetRaidDevMembers $1` ; do
1978	tmp=`SizeOfPartition $real_dev`
1979	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
1980	done
1981
1982	if [ "$smallest_size" = "$silly" ] ; then
1983	echo "-1"
1984	return 1
1985	else
1986	echo "$smallest_size"
1987	return 0
1988	fi
1989	}
1990
1991
1992	StripComments()
1993	{
1994	local tempfile
1995
1996	tempfile=$MINDI_TMP/$$.strip.txt
1997	cp -f $1 $tempfile 2>> $LOGFILE
1998	$AWK '{if (substr($0,0,1)!="#" \|\| substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
1999	rm -f $tempfile
2000	echo "Stripped comments from $2" >> $LOGFILE
2001	}
2002
2003
2004
2005	StripExecutable()
2006	{
2007	local tmpfile
2008
2009	tmpfile=$MINDI_TMP/stripped.$$.dat
2010	[ -d "$1" ] \|\| [ -h "$1" ] && return
2011	cp -f $1 $tmpfile 2>> $LOGFILE
2012	strip $tmpfile 2> /dev/null
2013	if [ "$?" -eq "0" ] ; then
2014	cp -f $tmpfile $1 2>> $LOGFILE
2015	echo "Stripped binary $2" >> $LOGFILE
2016	fi
2017	rm -f $tmpfile
2018	}
2019
2020
2021	TryToFindKernelPath() {
2022	local fname incoming res fkern_ver we_want_version possible_kernels noof_kernels kernelpath kdate duff_kernels
2023
2024	we_want_version=`uname -r`
2025	possible_kernels=""
2026	duff_kernels=""
2027
2028	if [ "$ARCH" = "ia64" ] ; then
2029	root="/boot/efi/efi"
2030	else
2031	root="/"
2032	fi
2033	for fname in `find $root -maxdepth 2 -type f \| grep -E 'lin\|kern' \| grep -Ev '^/proc/\|^/net/'` ; do
2034	[ ! -e "$fname" ] && continue
2035	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2036	file $fname \| grep -q gzip
2037	if [ "$?" -eq "0" ] ; then
2038	# Used by ia64
2039	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
2040	else
2041	fkern_ver=`strings $fname 2> /dev/null \| grep "[2-9]+[.][0-9]+[.][0-9]+[^\@]@"`
2042	fi
2043	[ "$fkern_ver" = "" ] && continue
2044	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
2045	[ -f "$fname" ] \|\| continue
2046	[ -h "$fname" ] && continue
2047	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
2048	file $fname \| grep -q gzip
2049	if [ "$?" -eq "0" ] ; then
2050	# Used by ia64
2051	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2052	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2053	duff_kernels="$fname $duff_kernels"
2054	else
2055	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2056	possible_kernels="$fname $possible_kernels"
2057	fi
2058	else
2059	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2060	LogIt "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2061	duff_kernels="$fname $duff_kernels"
2062	else
2063	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2064	possible_kernels="$fname $possible_kernels"
2065	fi
2066	fi
2067	done
2068	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
2069	possible_kernels=`find /boot/vmlinuz-2.* \| tail -n1`
2070	fi
2071	if [ ! "$possible_kernels" ] ; then
2072	LogIt "No kernel matches exactly. Are there any duff kernels?"
2073	possible_kernels="$duff_kernels"
2074	if [ ! "$possible_kernels" ] ; then
2075	LogIt "Sorry, no duff kernels either"
2076	else
2077	LogIt "I bet you're running Debian or Gentoo, aren't you?"
2078	LogIt "Your kernel doesn't have a sane builddate. Oh well..."
2079	fi
2080	fi
2081	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '`
2082	noof_kernels=`CountItemsIn "$possible_kernels"`
2083	if [ "$noof_kernels" -eq "0" ] ; then
2084	LogIt "Could not find your kernel."
2085	if [ -e "/boot/vmlinuz" ] ; then
2086	LogIt "Using /boot/vmlinuz as a last resort."
2087	output=/boot/vmlinuz
2088	else
2089	output=""
2090	fi
2091	elif [ "$noof_kernels" -eq "1" ] ; then
2092	kernelpath=`echo "$possible_kernels" \| sed s/' '//`
2093	echo "Your kernel is $kernelpath (v`uname -r`)" >> $LOGFILE
2094	output="$kernelpath"
2095	else
2096	for i in $possible_kernels ; do
2097	if echo $i \| grep "`uname -r`" ; then
2098	LogIt "OK, I used my initiative and found that "
2099	LogIt "$i is probably your kernel. "
2100	output="$i"
2101	return
2102	fi
2103	done
2104	if echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null ; then
2105	output=/boot/vmlinuz
2106	echo "Schlomo, this one's for you." >> $LOGFILE
2107	else
2108	LogIt "Two or more possible kernels found. You may specify any one of them and the "
2109	LogIt "boot disks will still work, probably. If one does not work, try another."
2110	LogIt "$possible_kernels"
2111	echo ""
2112	fi
2113	fi
2114	echo "$output" \| tr -s ' ' '\n' \| sort -u \| tr '\n' ' '
2115	}
2116
2117
2118	TurnTgzIntoRdz() {
2119	local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2120
2121	tgz_dir_fname=$1
2122	rdz_fname=$2
2123	kernelsize=$3
2124	maxsize=$(($BOOT_SIZE-$kernelsize))
2125	maxsize=$(($maxsize*2)); # to allow for compression of 50%
2126	tempfile=$MINDI_TMP/temp.rd
2127	mountpoint=$MINDI_TMP/mnt1
2128	res=0
2129	echo -en "..."
2130	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2131	echo -en "..."
2132	echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2133	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
2134	echo -en "..."
2135	mkdir -p $mountpoint
2136	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2137	echo -en "..."
2138	old_pwd=`pwd`
2139	cd $mountpoint
2140
2141	# AL04Oct08: Check whether /lib64 is a link and if so explicitly create one in rootfs
2142	if [ -h "/lib64" ]; then
2143	mkdir -p lib \|\| LogIt "Unable to create lib in $mountpoint."
2144	ln -s lib lib64 \|\| LogIt "/lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2145	fi
2146
2147	cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2148	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
2149
2150	cd dev \|\| Die "Can't cd to dev"
2151	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
2152	rm -f dev-entries.tgz
2153	cd ..
2154
2155	for w in insmod.static insmod.static.old ; do
2156	s=`which $w 2> /dev/null`
2157	if [ -e "$s" ] ; then
2158	tar cf - $s 2> /dev/null \| tar xf -
2159	fi
2160	done
2161
2162	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2163
2164	# Handle the case where busybox and mount are dynamically linked
2165	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
2166	if [ $? -eq 0 ]; then
2167	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
2168	rm -f bin/mount $MINDI_TMP/busy.lis
2169	mountlis=`grep mount $DEPLIST_FILE`
2170	for f in $MINDI_LIB/rootfs/bin/busybox $mountlis ; do
2171	if [ -f $f ]; then
2172	LocateDeps $f >> $MINDI_TMP/busy.lis
2173	fi
2174	done
2175	tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2> /dev/null \| tar xf -
2176	rm -f $MINDI_TMP/busy.lis
2177	fi
2178
2179	# Copy of files mandatory for ld.so
2180	cp -rp /etc/ld.so.c* $mountpoint/etc
2181
2182	mkdir -p $mountpoint/tmp
2183	# Management of udev (which includes modprobe in rules)
2184	ps auxww \| grep -v grep \| grep -qw udevd
2185	if [ $? -eq 0 ]; then
2186	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2187	LogIt "udev device manager found"
2188	tar cf - /etc/udev 2> /dev/null \| tar xf -
2189	# This avoids NIC remapping if on another machine at restore time on Debian at least
2190	rm -f ./etc/udev/rules.d/z25_persistent-net.rules
2191	tar cf - /lib*/udev 2> /dev/null \| tar xf -
2192	if [ -x /sbin/udevd ]; then
2193	lis2=`grep -Ev '^#' $MINDI_CONF/udev.files`
2194	lis=""
2195	# Get only the files which exist in that list
2196	# and potentially their symlink structure
2197	for i in $lis2; do
2198	if [ -h $i ]; then
2199	j=$i
2200	while [ -h $j ]; do
2201	lis="$lis $j"
2202	j=`readlink $j`
2203	done
2204	lis="$lis $j"
2205	elif [ -f $i ]; then
2206	lis="$lis $i"
2207	fi
2208	done
2209	# And their deps
2210	LocateDeps $lis > $MINDI_TMP/udev.lis
2211	for i in $lis; do
2212	if [ "`echo $i \| cut -c1`" = "/" ]; then
2213	j=`echo $i \| cut -c2-`
2214	[ "$j" != "" ] && rm -f $j
2215	fi
2216	done
2217	tar cf - $lis `sort -u $MINDI_TMP/udev.lis` 2> /dev/null \| tar xf -
2218	rm -f $MINDI_TMP/udev.lis
2219	else
2220	echo "udevd daemon not in standard place (/sbin)" 2>&1 \| tee -a $LOGFILE
2221	echo "mindi will use static devices which may cause problems" 2>&1 \| tee -a $LOGFILE
2222	rm -f $mountpoint/tmp/USE-UDEV
2223	fi
2224	fi
2225
2226	# Management of potential HW info (Proliant only at the moment)
2227	rm -rf $MINDI_CACHE/bkphw
2228	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
2229	if [ -d $MINDI_CACHE/bkphw ]; then
2230	LogIt "Hardware Information found and saved ..."
2231	cp -rp $MINDI_CACHE/bkphw .
2232	if [ -f $MINDI_CACHE/tools.files ]; then
2233	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2234	LocateDeps $lis > $MINDI_TMP/tools.lis
2235	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> /dev/null \| tar xf -
2236	fi
2237	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2238	mv -f $MINDI_CACHE/mindi-rsthw .
2239	chmod 755 ./mindi-rsthw
2240	fi
2241	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2242	fi
2243
2244	for w in cdrom groovy-stuff ; do
2245	mkdir -p mnt/$w
2246	done
2247
2248	tar cf - /dev/fd0[1,2][4,7,8] 2> /dev/null \| tar xf -
2249
2250	cd $old_pwd
2251	echo -en "..."
2252	old_pwd=`pwd`
2253	if [ "$YOUR_KERNEL_SUCKS" ] ; then
2254	cd $MINDI_TMP
2255	needed_modules_path=lib/modules/$FAILSAFE_KVER
2256	else
2257	cd /
2258	if [ "${kernelname}" != "" ]
2259	then
2260	needed_modules_path=lib/modules/${kernelname}
2261	else
2262	needed_modules_path=lib/modules/`uname -r`
2263	fi
2264	fi
2265
2266	needed_modules=""
2267	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2268
2269	if [ -e "$MINDI_TMP/NFS-DEV" ] ; then
2270	# For PXE boot
2271	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2272	fi
2273	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2274	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2275	fi
2276	for i in $DENY_MODS; do
2277	echo "Removing $i from the list of modules to load" >> $LOGFILE
2278	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
2279	done
2280
2281	[ -e "$needed_modules_path" ] \|\| LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2282	for i in $list_of_groovy_mods ; do
2283	needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2284	done
2285
2286	for i in $needed_modules ; do
2287	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
2288	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2289	echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2290	tar cf - $i 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy $i to $mountpoint"
2291	# Uncompress modules if not using udev and native modprobe
2292	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2293	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
2294	echo "Uncompressing $i" >> $LOGFILE
2295	gunzip -f $mountpoint/$i
2296	fi
2297	fi
2298	done
2299
2300	# Also copy modules.dep in case of udev so that normal modprobe works
2301	tar cf - /$needed_modules_path/modules.dep 2>/dev/null \| (cd $mountpoint ; tar xf -) \|\| LogIt "Unable to copy modules.dep to $mountpoint"
2302
2303	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2304	echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2305	[ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2306	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2307	rm -f $mountpoint/sbin/devfsd
2308	fi
2309	cd $old_pwd
2310	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2311	dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2312	rm -f $mountpoint/zero
2313	if [ _"$MONDO_SHARE" != _"" ]; then
2314	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2315	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP &> /dev/null
2316	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>/dev/null \|\| Die "Cannot copy mountlist to ramdisk"
2317	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2318	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2319	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2320	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2321	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2322	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2323	fi
2324	mkdir -p $mountpoint/proc
2325	echo "$BOOT_SIZE" > $mountpoint/tmp/$BOOT_SIZE.siz
2326	# Determine what filesystem to use for initrd image
2327	echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2328	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2329	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2330	case "$gvFileSystem" in
2331	"ext2fs")
2332	# say what will be used
2333	echo "Creating an ext2 initrd image..." >> $LOGFILE
2334	# kernel expects linuxrc in ext2 filesystem
2335	( cd $mountpoint && ln -sf sbin/init linuxrc )
2336	# unmount loop filesystem and create image file using the standard approach
2337	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2338	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2339	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
2340	ADDITIONAL_BOOT_PARAMS="$ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2341	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2342	rm -f ${rdz_fname}.tmp
2343	# log that we are done
2344	echo "...done." >> $LOGFILE
2345	;;
2346	"initramfs")
2347	# say what will be used
2348	echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2349	# make sure that cpio is there
2350	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
2351	# go into filesystem
2352	cd $mountpoint
2353	# kernel expects init in cpio filesystem
2354	ln -sf sbin/init init
2355	# create cpio image file and unmount loop filesystem
2356	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
2357	cd $old_pwd
2358	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2359	# log that we are done
2360	echo "...done." >> $LOGFILE
2361	;;
2362	*)
2363	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2364	;;
2365	esac
2366	if [ "$res" -eq "0" ] ; then
2367	echo -en "..."
2368	else
2369	echo -en "\rMade an rdz WITH ERRORS. \n"
2370	fi
2371	return 0
2372	}
2373
2374
2375	##############################################################################
2376	#----------------------------------- Main -----------------------------------#
2377	##############################################################################
2378
2379	# Now we can create what we need
2380	mkdir -p $MINDI_TMP
2381
2382	# Purge from potential old run
2383	if [ _"$MINDI_CACHE" = _"" ]; then
2384	Die "MINDI_CACHE undefined"
2385	fi
2386	rm -rf $MINDI_CACHE/* 2> /dev/null
2387	mkdir -p $MINDI_CACHE
2388
2389	if [ "$1" = "--printvar" ] ; then
2390	shift
2391	if [ _"$1" != _"" ] ; then
2392	set \| grep -Ew "^$1" \| cut -d= -f2
2393	fi
2394	MindiExit 0
2395	fi
2396
2397	> $LOGFILE
2398	echo "mindi v$MINDI_VERSION" >> $LOGFILE
2399	echo "$ARCH architecture detected" >> $LOGFILE
2400	echo "mindi called with the following arguments:" >> $LOGFILE
2401	echo "$@" >> $LOGFILE
2402	echo "Start date : `date`" >> $LOGFILE
2403	echo "-----------------------------" >> $LOGFILE
2404
2405	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2406
2407	# Log some capital variables
2408	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2409	echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2410	echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2411	echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2412	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2413	echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2414	if [ -f $MINDI_CONFIG ]; then
2415	echo "-----------------------------" >> $LOGFILE
2416	echo " Mindi configuration file " >> $LOGFILE
2417	echo "-----------------------------" >> $LOGFILE
2418	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2419	echo "-----------------------------" >> $LOGFILE
2420	fi
2421
2422
2423	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2424
2425	# Sanity checks
2426	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
2427	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
2428	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2429	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
2430	if which awk &> /dev/null ; then
2431	if ! which gawk &> /dev/null ; then
2432	LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2433	fi
2434	fi
2435	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
2436	[ ! -e "$FDISK" ] && Die "Cannot find (s)fdisk"
2437
2438	[ "`uname -r \| grep "2.4.[0-6]" \| grep -v "2.4.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2439
2440	# Update the PATH variable if incomplete
2441	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2442	PATH=$PATH:/sbin:/usr/sbin
2443	export PATH
2444	echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2445	echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2446	echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2447	fi
2448
2449	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2450	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2451	source $MINDI_LIB/FindDistroFailsafe
2452	# Log kernel image
2453	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2454	else
2455	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
2456	fi
2457
2458	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2459	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2460	fi
2461
2462	### BERLIOS
2463	### Fix as it's not mandatory on ia64
2464	if [ "$ARCH" = "ia64" ] ; then
2465	if which elilo &> /dev/null ; then
2466	LILO_EXE=elilo
2467	else
2468	LILO_EXE=`which false 2> /dev/null`
2469	fi
2470	else
2471	FindIsolinuxBinary
2472	fi
2473	trap "Aborted" SIGTERM
2474	DONE="\r\t\t\t\t\t\t\t\tDone. "
2475	kernelpath=""
2476	MONDO_ROOT=/var/cache/mondo
2477	mkdir -p $MONDO_ROOT
2478
2479	if [ -d "/proc/lvm" ]; then
2480	# LVM v1
2481	LVMCMD=""
2482	LVM="v1"
2483	elif [ -d "/dev/mapper" ]; then
2484	# LVM v2
2485	LVMCMD="lvm"
2486	LVM="v2"
2487	else
2488	LVM="false"
2489	fi
2490	echo "LVM set to $LVM" >> $LOGFILE
2491	echo "----------" >> $LOGFILE
2492	echo "mount result:" >> $LOGFILE
2493	echo "-------------" >> $LOGFILE
2494	mount >> $LOGFILE
2495	echo "-------------" >> $LOGFILE
2496	if [ -e /etc/raidtab ]; then
2497	echo "-------------" >> $LOGFILE
2498	echo "/etc/raidtab content:" >> $LOGFILE
2499	echo "-------------" >> $LOGFILE
2500	cat /etc/raidtab >> $LOGFILE
2501	fi
2502	echo "-------------" >> $LOGFILE
2503	echo "cat /proc/cmdline:" >> $LOGFILE
2504	echo "-------------" >> $LOGFILE
2505	cat /proc/cmdline >> $LOGFILE
2506	echo "-------------" >> $LOGFILE
2507	echo "cat /proc/swaps:" >> $LOGFILE
2508	echo "-------------" >> $LOGFILE
2509	cat /proc/swaps >> $LOGFILE
2510	echo "-------------" >> $LOGFILE
2511	echo "cat /proc/partitions:" >> $LOGFILE
2512	echo "-------------" >> $LOGFILE
2513	cat /proc/partitions >> $LOGFILE
2514	echo "-------------" >> $LOGFILE
2515	echo "cat /proc/filesystems:" >> $LOGFILE
2516	echo "-------------" >> $LOGFILE
2517	cat /proc/filesystems >> $LOGFILE
2518	echo "-------------" >> $LOGFILE
2519	echo "lsmod result:" >> $LOGFILE
2520	echo "-------------" >> $LOGFILE
2521	lsmod >> $LOGFILE
2522	MODULES="`cat /proc/modules \| awk '{print $1}'`"
2523	if [ -x /usr/sbin/esxcfg-module ]; then
2524	echo "-------------" >> $LOGFILE
2525	echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2526	echo "-------------" >> $LOGFILE
2527	echo "VMWare modules" >> $LOGFILE
2528	echo "-------------" >> $LOGFILE
2529	/usr/sbin/esxcfg-module -l >> $LOGFILE
2530	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| awk '{print $1}'`"
2531	fi
2532	echo "FORCE_MODS:" >> $LOGFILE
2533	echo "-------------" >> $LOGFILE
2534	echo $FORCE_MODS >> $LOGFILE
2535	echo "-------------" >> $LOGFILE
2536	echo "DENY_MODS:" >> $LOGFILE
2537	echo "-------------" >> $LOGFILE
2538	echo $DENY_MODS >> $LOGFILE
2539	echo "-------------" >> $LOGFILE
2540	echo "df result:" >> $LOGFILE
2541	echo "----------" >> $LOGFILE
2542	df -T >> $LOGFILE
2543	echo "-------------" >> $LOGFILE
2544	echo "Liste of extra modules is:" >> $LOGFILE
2545	echo "$EXTRA_MODS" >> $LOGFILE
2546	echo "-------------" >> $LOGFILE
2547
2548	# Compute libata version
2549	laver=`modinfo libata \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
2550	# If libata v2 is used then remove ide-generic as it will perturbate boot
2551	if [ "`echo $MODULES \| grep libata`" ]; then
2552	if [ "$laver" = "2" ]; then
2553	DENY_MODS="$DENY_MODS ide-generic"
2554	echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2555	echo "-------------" >> $LOGFILE
2556	fi
2557	fi
2558
2559	FLOPPY_WAS_MOUNTED=""
2560	for mtpt in /media/floppy /mnt/floppy /floppy ; do
2561	if mount \| grep -w $mtpt &> /dev/null ; then
2562	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2563	umount $mtpt
2564	fi
2565	done
2566
2567	#
2568	# If we have a USB device we need to store info
2569	# and remove it from the parameters line
2570	#
2571	if [ "$#" -ne "0" ] ; then
2572	if [ "$1" = "--usb" ] ; then
2573	shift
2574	USBDEVICE=$1
2575	if [ _"$USBDEVICE" = _"" ]; then
2576	Die "No USB device specified"
2577	fi
2578	shift
2579	fi
2580	fi
2581
2582	if [ "$#" -ne "0" ] ; then
2583	if [ "$1" = "--findkernel" ] ; then
2584	res=`TryToFindKernelPath`
2585	# Avoids logfile content for mondo
2586	export MONDO_SHARE=""
2587	if [ "$res" = "" ] ; then
2588	MindiExit -1
2589	else
2590	echo "$res"
2591	MindiExit 0
2592	fi
2593	elif [ "$1" = "--locatedeps" ] ; then
2594	[ ! "$2" ] && Die "Please specify the binary to look at"
2595	LocateDeps $2
2596	# Avoids logfile content for mondo
2597	export MONDO_SHARE=""
2598	MindiExit $?
2599	elif [ "$1" = "--readalllink" ] ; then
2600	[ ! "$2" ] && Die "Please specify the binary to look at"
2601	ReadAllLink $2
2602	# Avoids logfile content for mondo
2603	export MONDO_SHARE=""
2604	MindiExit $?
2605	elif [ "$1" = "--makemountlist" ] ; then
2606	[ ! "$2" ] && Die "Please specify the output file"
2607	MakeMountlist $2
2608	# Avoids logfile content for mondo
2609	export MONDO_SHARE=""
2610	MindiExit $?
2611	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
2612	echo "Mindi v$MINDI_VERSION"
2613	# Avoids logfile content for mondo
2614	export MONDO_SHARE=""
2615	MindiExit 0
2616	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2617	MONDO_TMP=$2
2618	# Change MINDI_TMP for the one provided by mondo
2619	# So that it can get back the built files
2620	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2> /dev/null
2621	rmdir $MINDI_TMP
2622	export MINDI_TMP=$MONDO_TMP
2623	mkdir -p $MINDI_TMP
2624	# This is the scratch dir in mondo - subdir images
2625	MINDI_CACHE=$3
2626	if [ _"$MINDI_CACHE" != _"" ]; then
2627	mkdir -p $MINDI_CACHE
2628	fi
2629	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
2630	###
2631	### Sq-Modification...
2632	### Attempt to locate kernel specific module path
2633	### if module path is found then use it other wise use uname -r to set it...
2634	###
2635	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
2636	LogIt "kernelname = $kernelname"
2637	LogIt "kernelpath = $kernelpath"
2638	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2639	then
2640	LogIt "Module path for ${kernelpath} not found..."
2641	LogIt "using running kernel\'s modules."
2642	kernelname=`uname -r`
2643	else
2644	LogIt "Using modules for kernel: ${kernelname}"
2645	fi
2646	###
2647	### end of Sq-Modification
2648	###
2649	TAPEDEV=$5
2650	TAPESIZE=$6
2651	FILES_IN_FILELIST=$7
2652	USE_LZO=$8
2653	CDRECOVERY=$9
2654	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
2655	IMAGE_DEVS=""
2656	else
2657	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
2658	fi
2659	if [ "${11}" ] ; then
2660	LILO_OPTIONS=""
2661	# LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
2662	fi
2663	LAST_FILELIST_NUMBER=${12}
2664	ESTIMATED_TOTAL_NOOF_SLICES=${13}
2665	EXCLUDE_DEVS="${14}"
2666	USE_COMP="${15}"
2667	USE_LILO="${16}"
2668	USE_STAR="${17}"
2669	INTERNAL_TAPE_BLOCK_SIZE="${18}"
2670	DIFFERENTIAL="${19}"
2671	USE_GZIP="${20}"
2672	NOT_BOOT="${21}"
2673	[ "$USE_COMP" = "" ] && USE_COMP=yes
2674	[ "$USE_GZIP" = "" ] && USE_GZIP=no
2675	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
2676	[ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
2677	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
2678	kernelname=`echo $kernelpath \| cut -d'-' -f2-`
2679	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
2680	then
2681	LogIt "Module path for ${kernelpath} not found..."
2682	LogIt "using running kernel\'s modules."
2683	kernelname=`uname -r`
2684	else
2685	LogIt "Using modules for kernel: ${kernelname}"
2686	fi
2687	[ "$CDRECOVERY" = "yes" ] && [ "$TAPEDEV" != "" ] && Die "Sorry, you can't use --cd-recovery and --write-tapes at the same time"
2688	# MONDO_ROOT is the real scratchdir
2689	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
2690	if [ _"$MONDO_ROOT" != _"" ]; then
2691	mkdir -p $MONDO_ROOT
2692	else
2693	Die "MONDO_ROOT is undefined"
2694	fi
2695	else
2696	echo "Syntax: mindi (--custom ....)" >> /dev/stderr
2697	MindiExit -1
2698	fi
2699	fi
2700	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
2701
2702	if [ _"$MONDO_SHARE" = _"" ]; then
2703	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
2704	LogIt "Latest Mindi is available from http://www.mondorescue.org"
2705	LogIt "BusyBox sources are available from http://www.busybox.net"
2706	LogIt "------------------------------------------------------------------------------"
2707	else
2708	echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
2709	fi
2710	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
2711	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
2712	else
2713	LogIt "Unable to find mindi-busybox, please install it"
2714	MindiExit -1
2715	fi
2716
2717	# for Mandrake 9.2, which comes with two aes.o.gz modules :-/
2718	insmod /lib/modules/`uname -r`///misc/aes.*o.gz >> $LOGFILE 2>> $LOGFILE
2719	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
2720	insmod $i >> $LOGFILE 2>> $LOGFILE
2721	done
2722
2723	KERN_DISK_MADE=""
2724
2725	echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
2726	echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
2727	echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
2728	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
2729	LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
2730	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2731	MakeMountlist $MINDI_TMP/mountlist.txt
2732	mkdir -p $MINDI_TMP/small-all/tmp
2733	cd $MINDI_TMP/small-all
2734	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>/dev/null \|\| Die "Cannot copy small all.tar.gz"
2735	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz \|\| Die "Cannot make small all.tar.gz"
2736	sleep 2
2737	LogIt "Done. Exiting."
2738	MindiExit 0
2739	fi
2740
2741	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2742	LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
2743	fi
2744
2745	if [ "$kernelpath" = "" ] ; then
2746	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
2747	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
2748	read ch
2749	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
2750	USE_OWN_KERNEL="yes"
2751	else
2752	USE_OWN_KERNEL="no"
2753	fi
2754	if [ "$USE_OWN_KERNEL" = "yes" ]; then
2755	YOUR_KERNEL_SUCKS=""
2756	kernelpath=`TryToFindKernelPath`
2757	if [ "$kernelpath" = "" ] ; then
2758	echo -n "Please enter kernel path : "
2759	read kernelpath
2760	fi
2761	else
2762	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
2763	fi
2764	fi
2765	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
2766	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2767	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
2768	source $MINDI_LIB/FindDistroFailsafe
2769	# Log kernel image
2770	LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2771	kernelpath="$FAILSAFE_KBIN"
2772	LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
2773	LogIt "The failsafe kernel is $kernelpath.\n"
2774	LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
2775	LogIt "disks then it may still be a result of a problem with your kernel.\n"
2776	pwd=`pwd`
2777	cd $MINDI_TMP
2778	mkdir -p lib/modules
2779	cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" \|\| Die "Cannot copy kernel modules."
2780	cd $pwd
2781	else
2782	kernelpath=$MINDI_LIB/vmlinuz
2783	LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
2784	LogIt "However, you are still running your kernel. If Mindi fails to create your"
2785	LogIt "disks then it may still be a result of a problem with your kernel."
2786	pwd=`pwd`
2787	cd $MINDI_TMP
2788	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
2789	cd $pwd
2790	fi
2791	YOUR_KERNEL_SUCKS="Your kernel sucks"
2792	fi
2793	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
2794	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
2795
2796	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
2797
2798	PrepareDataDiskImages
2799
2800	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2801	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
2802	export ramdisk_size=$rds
2803
2804	echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
2805	if [ "$ARCH" = "ia64" ] ; then
2806	PrepareBootDiskImage_LILO $kernelpath \|\| Die "Failed to create ia64 image disk image."
2807	else
2808	PrepareBootDiskImage_SYSLINUX $kernelpath \|\| Die "Failed to create $ramdisk_size MB disk image."
2809	fi
2810
2811	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
2812	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
2813
2814	if [ _"$MONDO_SHARE" = _"" ]; then
2815	ListImagesForUser
2816	OfferToMakeBootableISO
2817	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
2818	OfferToMakeBootableUSB
2819	fi
2820	LogIt "Finished."
2821	elif [ "$TAPEDEV" ] ; then
2822	rm -f $MINDI_CACHE/{img,iso}
2823	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2824	OfferToMakeBootableUSB
2825	fi
2826	OfferToMakeBootableISO
2827	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
2828	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
2829	else
2830	Die "Cannot find all.tar.gz, to be written to tape"
2831	fi
2832	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2833	OfferToMakeBootableUSB
2834	else
2835	OfferToMakeBootableISO
2836	fi
2837	# cleanup
2838	LogIt "$FRIENDLY_OUTSTRING"
2839	for mtpt in $FLOPPY_WAS_MOUNTED ; do
2840	mount $mtpt
2841	done
2842	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: