Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (13 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/networking/libiproute/utils.h

    r821 r1770  
     1/* vi: set sw=4 ts=4: */
    12#ifndef __UTILS_H__
    23#define __UTILS_H__ 1
    3 
    4 #include "libbb.h"
    5 #include <asm/types.h>
    6 #include <resolv.h>
    74
    85#include "libnetlink.h"
     
    118
    129extern int preferred_family;
    13 extern int show_stats;
    14 extern int show_details;
    15 extern int show_raw;
    16 extern int resolve_hosts;
    17 extern int oneline;
    18 extern char * _SL_;
     10extern smallint show_stats;    /* UNUSED */
     11extern smallint show_details;  /* UNUSED */
     12extern smallint show_raw;      /* UNUSED */
     13extern smallint resolve_hosts; /* UNUSED */
     14extern smallint oneline;
     15extern char _SL_;
    1916
    2017#ifndef IPPROTO_ESP
     
    3027extern void incomplete_command(void) ATTRIBUTE_NORETURN;
    3128
    32 #define NEXT_ARG() do { argv++; if (--argc <= 0) incomplete_command(); } while(0)
     29#define NEXT_ARG() do { argv++; if (--argc <= 0) incomplete_command(); } while (0)
    3330
    3431typedef struct
    3532{
    36     __u8 family;
    37     __u8 bytelen;
    38     __s16 bitlen;
    39     __u32 data[4];
     33    uint8_t family;
     34    uint8_t bytelen;
     35    int16_t bitlen;
     36    uint32_t data[4];
    4037} inet_prefix;
    4138
     
    4542#endif
    4643
    47 struct dn_naddr
    48 {
     44struct dn_naddr {
    4945    unsigned short          a_len;
    5046    unsigned char a_addr[DN_MAXADDL];
     
    5854};
    5955
    60 extern __u32 get_addr32(char *name);
     56extern uint32_t get_addr32(char *name);
    6157extern int get_addr_1(inet_prefix *dst, char *arg, int family);
    6258extern int get_prefix_1(inet_prefix *dst, char *arg, int family);
     
    6965#define get_ushort get_u16
    7066#define get_short get_s16
    71 extern int get_u32(__u32 *val, char *arg, int base);
    72 extern int get_u16(__u16 *val, char *arg, int base);
    73 extern int get_s16(__s16 *val, char *arg, int base);
    74 extern int get_u8(__u8 *val, char *arg, int base);
    75 extern int get_s8(__s8 *val, char *arg, int base);
     67extern int get_u32(uint32_t *val, char *arg, int base);
     68extern int get_u16(uint16_t *val, char *arg, int base);
     69extern int get_s16(int16_t *val, char *arg, int base);
     70extern int get_u8(uint8_t *val, char *arg, int base);
     71extern int get_s8(int8_t *val, char *arg, int base);
    7672
    7773extern const char *format_host(int af, int len, void *addr, char *buf, int buflen);
    7874extern const char *rt_addr_n2a(int af, int len, void *addr, char *buf, int buflen);
    7975
    80 void invarg(const char * const, const char * const) ATTRIBUTE_NORETURN;
    81 void duparg(char *, char *) ATTRIBUTE_NORETURN;
    82 void duparg2(char *, char *) ATTRIBUTE_NORETURN;
    83 int matches(char *arg, char *pattern);
    84 extern int inet_addr_match(inet_prefix *a, inet_prefix *b, int bits);
     76void invarg(const char *, const char *) ATTRIBUTE_NORETURN;
     77void duparg(const char *, const char *) ATTRIBUTE_NORETURN;
     78void duparg2(const char *, const char *) ATTRIBUTE_NORETURN;
     79int inet_addr_match(inet_prefix *a, inet_prefix *b, int bits);
    8580
    8681const char *dnet_ntop(int af, const void *addr, char *str, size_t len);
     
    9085int ipx_pton(int af, const char *src, void *addr);
    9186
    92 extern int __iproute2_hz_internal;
    93 extern int __get_hz(void);
    94 
    95 static __inline__ int get_hz(void)
    96 {
    97     if (__iproute2_hz_internal == 0)
    98         __iproute2_hz_internal = __get_hz();
    99     return __iproute2_hz_internal;
    100 }
    101 
    10287#endif /* __UTILS_H__ */
Note: See TracChangeset for help on using the changeset viewer.