Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (13 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/libbb/Config.in

    r821 r1770  
    66menu "Busybox Library Tuning"
    77
    8 config CONFIG_MD5_SIZE_VS_SPEED
     8config PASSWORD_MINLEN
     9    int "Minimum password length"
     10    default 6
     11    range 5 32
     12    help
     13      Minimum allowable password length.
     14
     15config MD5_SIZE_VS_SPEED
    916    int " MD5: Trade Bytes for Speed"
    1017    default 2
     
    2027      3 (smallest)        5.1                4912
    2128
     29config FEATURE_FAST_TOP
     30    bool "Faster /proc scanning code (+100 bytes)"
     31    default n
     32    help
     33      This option makes top (and ps) ~20% faster (or 20% less CPU hungry),
     34      but code size is slightly bigger.
     35
     36config FEATURE_ETC_NETWORKS
     37    bool "Support for /etc/networks"
     38    default n
     39    help
     40      Enable support for network names in /etc/networks. This is
     41      a rarely used feature which allows you to use names
     42      instead of IP/mask pairs in route command.
     43
     44config FEATURE_EDITING
     45    bool "Command line editing"
     46    default n
     47    help
     48      Enable line editing (mainly for shell command line).
     49
     50config FEATURE_EDITING_MAX_LEN
     51    int "Maximum length of input"
     52    range 128 8192
     53    default 1024
     54    depends on FEATURE_EDITING
     55    help
     56      Line editing code uses on-stack buffers for storage.
     57      You may want to decrease this parameter if your target machine
     58      benefits from smaller stack usage.
     59
     60config FEATURE_EDITING_FANCY_KEYS
     61    bool "Additional editing keys"
     62    default n
     63    depends on FEATURE_EDITING
     64    help
     65      Enable additonal editing keys (Ctrl-E, Ctrl-U etc).
     66      Arrow keys, Home/End/Delete and Ctrl-W work even without this option.
     67
     68config FEATURE_EDITING_VI
     69    bool "vi-style line editing commands"
     70    default n
     71    depends on FEATURE_EDITING
     72    help
     73      Enable vi-style line editing.  In shells, this mode can be
     74      turned on and off with "set -o vi" and "set +o vi".
     75
     76config FEATURE_EDITING_HISTORY
     77    int "History size"
     78    range 0 99999
     79    default 15
     80    depends on FEATURE_EDITING
     81    help
     82      Specify command history size.
     83
     84config FEATURE_EDITING_SAVEHISTORY
     85    bool "History saving"
     86    default n
     87    depends on ASH && FEATURE_EDITING
     88    help
     89      Enable history saving in ash shell.
     90
     91config FEATURE_TAB_COMPLETION
     92    bool "Tab completion"
     93    default n
     94    depends on FEATURE_EDITING
     95    help
     96      Enable tab completion.
     97
     98config FEATURE_USERNAME_COMPLETION
     99    bool "Username completion"
     100    default n
     101    depends on FEATURE_TAB_COMPLETION
     102    help
     103      Enable username completion.
     104
     105config FEATURE_EDITING_FANCY_PROMPT
     106    bool "Fancy shell prompts"
     107    default n
     108    depends on FEATURE_EDITING
     109    help
     110      Setting this option allows for prompts to use things like \w and
     111      \$ and escape codes.
     112
     113config MONOTONIC_SYSCALL
     114    bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
     115    default y
     116    help
     117      Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
     118      time intervals (time, ping, traceroute etc need this).
     119      Probably requires Linux 2.6+. If not selected, gettimeofday
     120      will be used instead (which gives wrong results if date/time
     121      is reset).
     122
     123config IOCTL_HEX2STR_ERROR
     124    bool "Use ioctl names rather than hex values in error messages"
     125    default y
     126    help
     127      Use ioctl names rather than hex values in error messages
     128      (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
     129      saves about 1400 bytes.
    22130endmenu
Note: See TracChangeset for help on using the changeset viewer.