Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (16 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed

  • branches/stable/mindi-busybox/e2fsprogs/Config.in

    r821 r1770  
    66menu "Linux Ext2 FS Progs"
    77
    8 config CONFIG_CHATTR
     8config CHATTR
    99    bool "chattr"
    1010    default n
    … …  
    1212      chattr changes the file attributes on a second extended file system.
    1313
    14 config CONFIG_E2FSCK
    15     bool "e2fsck"
    16     default n
    17     help
    18       e2fsck is used to check Linux second extended file systems (ext2fs).
    19       e2fsck also supports ext2 filesystems countaining a journal (ext3).
    20       The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also
    21       provided.
     14### config E2FSCK
     15###     bool "e2fsck"
     16###     default n
     17###     help
     18###       e2fsck is used to check Linux second extended file systems (ext2fs).
     19###       e2fsck also supports ext2 filesystems countaining a journal (ext3).
     20###       The normal compat symlinks 'fsck.ext2' and 'fsck.ext3' are also
     21###       provided.
    2222
    23 config CONFIG_FSCK
     23config FSCK
    2424    bool "fsck"
    2525    default n
    … …  
    2929      checkers (fsck.fstype) available under Linux.
    3030
    31 config CONFIG_LSATTR
     31config LSATTR
    3232    bool "lsattr"
    3333    default n
    … …  
    3535      lsattr lists the file attributes on a second extended file system.
    3636
    37 config CONFIG_MKE2FS
    38     bool "mke2fs"
    39     default n
    40     help
    41       mke2fs is used to create an ext2/ext3 filesystem.  The normal compat
    42       symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided.
     37### config MKE2FS
     38###     bool "mke2fs"
     39###     default n
     40###     help
     41###       mke2fs is used to create an ext2/ext3 filesystem.  The normal compat
     42###       symlinks 'mkfs.ext2' and 'mkfs.ext3' are also provided.
    4343
    44 config CONFIG_TUNE2FS
    45     bool "tune2fs"
    46     default n
    47     help
    48       tune2fs allows the system administrator to adjust various tunable
    49       filesystem parameters on Linux ext2/ext3 filesystems.
     44### config TUNE2FS
     45###     bool "tune2fs"
     46###     default n
     47###     help
     48###       tune2fs allows the system administrator to adjust various tunable
     49###       filesystem parameters on Linux ext2/ext3 filesystems.
    5050
    51 config CONFIG_E2LABEL
    52     bool "e2label"
    53     default n
    54     depends on CONFIG_TUNE2FS
    55     help
    56       e2label will display or change the filesystem label on the ext2
    57       filesystem located on device.
     51### config E2LABEL
     52###     bool "e2label"
     53###     default n
     54###     depends on TUNE2FS
     55###     help
     56###       e2label will display or change the filesystem label on the ext2
     57###       filesystem located on device.
    5858
    59 config CONFIG_FINDFS
    60     bool "findfs"
    61     default n
    62     depends on CONFIG_TUNE2FS
    63     help
    64       findfs will search the disks in the system looking for a filesystem
    65       which has a label matching label or a UUID equal to uuid.
     59### config FINDFS
     60###     bool "findfs"
     61###     default n
     62###     depends on TUNE2FS
     63###     help
     64###       findfs will search the disks in the system looking for a filesystem
     65###       which has a label matching label or a UUID equal to uuid.
    6666
    6767endmenu
Note: See TracChangeset for help on using the changeset viewer.