Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (13 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/coreutils/tee.c

    r821 r1770  
    55 * Copyright (C) 2003  Manuel Novoa III  <mjn3@codepoet.org>
    66 *
    7  * This program is free software; you can redistribute it and/or modify
    8  * it under the terms of the GNU General Public License as published by
    9  * the Free Software Foundation; either version 2 of the License, or
    10  * (at your option) any later version.
    11  *
    12  * This program is distributed in the hope that it will be useful,
    13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
    14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
    15  * General Public License for more details.
    16  *
    17  * You should have received a copy of the GNU General Public License
    18  * along with this program; if not, write to the Free Software
    19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
    20  *
     7 * Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
    218 */
    229
     
    2411/* http://www.opengroup.org/onlinepubs/007904975/utilities/tee.html */
    2512
    26 #include <stdio.h>
    27 #include <stdlib.h>
     13#include "libbb.h"
    2814#include <signal.h>
    29 #include <unistd.h>
    30 #include "busybox.h"
    3115
     16int tee_main(int argc, char **argv);
    3217int tee_main(int argc, char **argv)
    3318{
    3419    const char *mode = "w\0a";
    3520    FILE **files;
    36     FILE **p;
    37     char **filenames;
    38     int flags;
    39     int retval = EXIT_SUCCESS;
    40 #ifdef CONFIG_FEATURE_TEE_USE_BLOCK_IO
     21    FILE **fp;
     22    char **names;
     23    char **np;
     24    char retval;
     25#if ENABLE_FEATURE_TEE_USE_BLOCK_IO
    4126    ssize_t c;
    4227# define buf bb_common_bufsiz1
     
    4429    int c;
    4530#endif
     31    retval = getopt32(argv, "ia");  /* 'a' must be 2nd */
     32    argc -= optind;
     33    argv += optind;
    4634
    47     flags = bb_getopt_ulflags(argc, argv, "ia");    /* 'a' must be 2nd */
     35    mode += (retval & 2);   /* Since 'a' is the 2nd option... */
    4836
    49     mode += (flags & 2);    /* Since 'a' is the 2nd option... */
    50 
    51     if (flags & 1) {
    52         signal(SIGINT, SIG_IGN);    /* TODO - switch to sigaction.*/
     37    if (retval & 1) {
     38        signal(SIGINT, SIG_IGN); /* TODO - switch to sigaction. */
    5339    }
    54 
     40    retval = EXIT_SUCCESS;
    5541    /* gnu tee ignores SIGPIPE in case one of the output files is a pipe
    5642     * that doesn't consume all its input.  Good idea... */
    57     signal(SIGPIPE, SIG_IGN);       /* TODO - switch to sigaction.*/
     43    signal(SIGPIPE, SIG_IGN);   /* TODO - switch to sigaction. */
    5844
    5945    /* Allocate an array of FILE *'s, with one extra for a sentinal. */
    60     p = files = (FILE **)xmalloc(sizeof(FILE *) * (argc - optind + 2));
    61     *p = stdout;
    62     argv += optind - 1;
    63     filenames = argv - 1;
    64     *filenames = (char *) bb_msg_standard_input;    /* for later */
     46    fp = files = xzalloc(sizeof(FILE *) * (argc + 2));
     47    np = names = argv - 1;
     48
     49    files[0] = stdout;
    6550    goto GOT_NEW_FILE;
    66 
    6751    do {
    68         if ((*p = bb_wfopen(*argv, mode)) == NULL) {
     52        *fp = fopen_or_warn(*argv, mode);
     53        if (*fp == NULL) {
    6954            retval = EXIT_FAILURE;
    7055            continue;
    7156        }
    72         filenames[(int)(p - files)] = *argv;
    73     GOT_NEW_FILE:
    74         setbuf(*p, NULL);   /* tee must not buffer output. */
    75         ++p;
    76     } while (*++argv);
     57        *np = *argv++;
     58 GOT_NEW_FILE:
     59        setbuf(*fp++, NULL);    /* tee must not buffer output. */
     60        np++;
     61    } while (*argv);
     62    /* names[0] will be filled later */
    7763
    78     *p = NULL;              /* Store the sentinal value. */
    79 
    80 #ifdef CONFIG_FEATURE_TEE_USE_BLOCK_IO
     64#if ENABLE_FEATURE_TEE_USE_BLOCK_IO
    8165    while ((c = safe_read(STDIN_FILENO, buf, BUFSIZ)) > 0) {
    82         for (p=files ; *p ; p++) {
    83             fwrite(buf, 1, c, *p);
    84         }
     66        fp = files;
     67        do
     68            fwrite(buf, 1, c, *fp++);
     69        while (*fp);
    8570    }
    86 
    87     if (c < 0) {            /* Make sure read errors are signaled. */
     71    if (c < 0) {        /* Make sure read errors are signaled. */
    8872        retval = EXIT_FAILURE;
    8973    }
    90 
    9174#else
    9275    setvbuf(stdout, NULL, _IONBF, 0);
    9376    while ((c = getchar()) != EOF) {
    94         for (p=files ; *p ; p++) {
    95             putc(c, *p);
    96         }
     77        fp = files;
     78        do
     79            putc(c, *fp++);
     80        while (*fp);
    9781    }
    9882#endif
     
    10286     * file table is stdout, we can save one "if ferror" test by
    10387     * setting the first entry to stdin and checking stdout error
    104      * status with bb_fflush_stdout_and_exit()... although fflush()ing
     88     * status with fflush_stdout_and_exit()... although fflush()ing
    10589     * is unnecessary here. */
    106 
    107     p = files;
    108     *p = stdin;
    109     do {        /* Now check for (input and) output errors. */
     90    np = names;
     91    fp = files;
     92    names[0] = (char *) bb_msg_standard_input;
     93    files[0] = stdin;
     94    do {    /* Now check for input and output errors. */
    11095        /* Checking ferror should be sufficient, but we may want to fclose.
    11196         * If we do, remember not to close stdin! */
    112         bb_xferror(*p, filenames[(int)(p - files)]);
    113     } while (*++p);
     97        die_if_ferror(*fp++, *np++);
     98    } while (*fp);
    11499
    115     bb_fflush_stdout_and_exit(retval);
     100    fflush_stdout_and_exit(retval);
    116101}
Note: See TracChangeset for help on using the changeset viewer.