Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (13 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/coreutils/du.c

    r821 r1770  
    2424 */
    2525
    26 #include <stdlib.h>
    27 #include <limits.h>
    28 #include <unistd.h>
    29 #include <dirent.h>
    30 #include <sys/stat.h>
    31 #include "busybox.h"
    32 
    33 #ifdef CONFIG_FEATURE_HUMAN_READABLE
    34 # ifdef CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
    35 static unsigned long disp_hr = KILOBYTE;
     26#include "libbb.h"
     27
     28#if ENABLE_FEATURE_HUMAN_READABLE
     29# if ENABLE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
     30static unsigned long disp_hr = 1024;
    3631# else
    3732static unsigned long disp_hr = 512;
    3833# endif
    39 #elif defined CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
    40 static unsigned int disp_k = 1;
    41 #else
    42 static unsigned int disp_k; /* bss inits to 0 */
     34#elif ENABLE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
     35static unsigned disp_k = 1;
     36#else
     37static unsigned disp_k; /* bss inits to 0 */
    4338#endif
    4439
     
    4641static nlink_t count_hardlinks = 1;
    4742
    48 static int status
    49 #if EXIT_SUCCESS == 0
    50     = EXIT_SUCCESS
    51 #endif
    52     ;
     43static int status;
    5344static int print_files;
    5445static int slink_depth;
     
    5849
    5950
    60 static void print(long size, char *filename)
     51static void print(long size, const char *const filename)
    6152{
    6253    /* TODO - May not want to defer error checking here. */
    63 #ifdef CONFIG_FEATURE_HUMAN_READABLE
    64     bb_printf("%s\t%s\n", make_human_readable_str(size, 512, disp_hr),
    65            filename);
     54#if ENABLE_FEATURE_HUMAN_READABLE
     55    printf("%s\t%s\n", make_human_readable_str(size, 512, disp_hr),
     56            filename);
    6657#else
    6758    if (disp_k) {
     
    6960        size >>= 1;
    7061    }
    71     bb_printf("%ld\t%s\n", size, filename);
     62    printf("%ld\t%s\n", size, filename);
    7263#endif
    7364}
    7465
    7566/* tiny recursive du */
    76 static long du(char *filename)
     67static long du(const char *const filename)
    7768{
    7869    struct stat statbuf;
    7970    long sum;
    8071
    81     if ((lstat(filename, &statbuf)) != 0) {
     72    if (lstat(filename, &statbuf) != 0) {
    8273        bb_perror_msg("%s", filename);
    8374        status = EXIT_FAILURE;
     
    9788    if (S_ISLNK(statbuf.st_mode)) {
    9889        if (slink_depth > du_depth) {   /* -H or -L */
    99             if ((stat(filename, &statbuf)) != 0) {
     90            if (stat(filename, &statbuf) != 0) {
    10091                bb_perror_msg("%s", filename);
    10192                status = EXIT_FAILURE;
     
    111102    if (statbuf.st_nlink > count_hardlinks) {
    112103        /* Add files/directories with links only once */
    113         if (is_in_ino_dev_hashtable(&statbuf, NULL)) {
     104        if (is_in_ino_dev_hashtable(&statbuf)) {
    114105            return 0;
    115106        }
     
    122113        char *newfile;
    123114
    124         dir = bb_opendir(filename);
     115        dir = warn_opendir(filename);
    125116        if (!dir) {
    126117            status = EXIT_FAILURE;
     
    136127
    137128            newfile = concat_subpath_file(filename, name);
    138             if(newfile == NULL)
     129            if (newfile == NULL)
    139130                continue;
    140131            ++du_depth;
     
    153144}
    154145
     146int du_main(int argc, char **argv);
    155147int du_main(int argc, char **argv)
    156148{
     
    159151    int print_final_total;
    160152    char *smax_print_depth;
    161     unsigned long opt;
    162 
    163 #ifdef CONFIG_FEATURE_DU_DEFUALT_BLOCKSIZE_1K
     153    unsigned opt;
     154
     155#if ENABLE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
    164156    if (getenv("POSIXLY_CORRECT")) {    /* TODO - a new libbb function? */
    165 #ifdef CONFIG_FEATURE_HUMAN_READABLE
     157#if ENABLE_FEATURE_HUMAN_READABLE
    166158        disp_hr = 512;
    167159#else
     
    171163#endif
    172164
    173     /* Note: SUSv3 specifies that -a and -s options can not be used together
     165    /* Note: SUSv3 specifies that -a and -s options cannot be used together
    174166     * in strictly conforming applications.  However, it also says that some
    175167     * du implementations may produce output when -a and -s are used together.
     
    177169     * ignore -a.  This is consistent with -s being equivalent to -d 0.
    178170     */
    179 #ifdef CONFIG_FEATURE_HUMAN_READABLE
    180     bb_opt_complementally = "h-km:k-hm:m-hk:H-L:L-H:s-d:d-s";
    181     opt = bb_getopt_ulflags(argc, argv, "aHkLsx" "d:" "lc" "hm", &smax_print_depth);
    182     if((opt & (1 << 9))) {
     171#if ENABLE_FEATURE_HUMAN_READABLE
     172    opt_complementary = "h-km:k-hm:m-hk:H-L:L-H:s-d:d-s";
     173    opt = getopt32(argv, "aHkLsx" "d:" "lc" "hm", &smax_print_depth);
     174    if (opt & (1 << 9)) {
    183175        /* -h opt */
    184176        disp_hr = 0;
    185177    }
    186     if((opt & (1 << 10))) {
     178    if (opt & (1 << 10)) {
    187179        /* -m opt */
    188         disp_hr = MEGABYTE;
    189     }
    190     if((opt & (1 << 2))) {
     180        disp_hr = 1024*1024;
     181    }
     182    if (opt & (1 << 2)) {
    191183        /* -k opt */
    192             disp_hr = KILOBYTE;
    193     }
    194 #else
    195     bb_opt_complementally = "H-L:L-H:s-d:d-s";
    196     opt = bb_getopt_ulflags(argc, argv, "aHkLsx" "d:" "lc", &smax_print_depth);
    197 #if !defined CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
    198     if((opt & (1 << 2))) {
     184        disp_hr = 1024;
     185    }
     186#else
     187    opt_complementary = "H-L:L-H:s-d:d-s";
     188    opt = getopt32(argv, "aHkLsx" "d:" "lc", &smax_print_depth);
     189#if !ENABLE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K
     190    if (opt & (1 << 2)) {
    199191        /* -k opt */
    200             disp_k = 1;
    201     }
    202 #endif
    203 #endif
    204     if((opt & (1 << 0))) {
     192        disp_k = 1;
     193    }
     194#endif
     195#endif
     196    if (opt & (1 << 0)) {
    205197        /* -a opt */
    206198        print_files = INT_MAX;
    207199    }
    208     if((opt & (1 << 1))) {
     200    if (opt & (1 << 1)) {
    209201        /* -H opt */
    210202        slink_depth = 1;
    211203    }
    212     if((opt & (1 << 3))) {
     204    if (opt & (1 << 3)) {
    213205        /* -L opt */
    214             slink_depth = INT_MAX;
    215     }
    216     if((opt & (1 << 4))) {
     206        slink_depth = INT_MAX;
     207    }
     208    if (opt & (1 << 4)) {
    217209        /* -s opt */
    218             max_print_depth = 0;
    219         }
     210        max_print_depth = 0;
     211    }
    220212    one_file_system = opt & (1 << 5); /* -x opt */
    221     if((opt & (1 << 6))) {
     213    if (opt & (1 << 6)) {
    222214        /* -d opt */
    223         max_print_depth = bb_xgetularg10_bnd(smax_print_depth, 0, INT_MAX);
    224     }
    225     if((opt & (1 << 7))) {
     215        max_print_depth = xatoi_u(smax_print_depth);
     216    }
     217    if (opt & (1 << 7)) {
    226218        /* -l opt */
    227         count_hardlinks = INT_MAX;
     219        count_hardlinks = MAXINT(nlink_t);
    228220    }
    229221    print_final_total = opt & (1 << 8); /* -c opt */
     
    232224    argv += optind;
    233225    if (optind >= argc) {
    234         *--argv = ".";
     226        *--argv = (char*)".";
    235227        if (slink_depth == 1) {
    236228            slink_depth = 0;
     
    244236        slink_depth = slink_depth_save;
    245237    } while (*++argv);
    246 #ifdef CONFIG_FEATURE_CLEAN_UP
    247     reset_ino_dev_hashtable();
    248 #endif
    249 
     238    if (ENABLE_FEATURE_CLEAN_UP)
     239        reset_ino_dev_hashtable();
    250240    if (print_final_total) {
    251241        print(total, "total");
    252242    }
    253243
    254     bb_fflush_stdout_and_exit(status);
     244    fflush_stdout_and_exit(status);
    255245}
Note: See TracChangeset for help on using the changeset viewer.