Ignore:
Timestamp:
Nov 6, 2007, 11:01:53 AM (13 years ago)
Author:
Bruno Cornec
Message:
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File:
1 edited

Legend:

Unmodified
Added
Removed
  • branches/stable/mindi-busybox/archival/libunarchive/get_header_tar.c

    r821 r1770  
     1/* vi: set sw=4 ts=4: */
    12/* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
    23 *
     
    1112 */
    1213
    13 #include <stdio.h>
    14 #include <stdlib.h>
    15 #include <string.h>
    16 #include <sys/sysmacros.h>  /* For makedev */
     14#include "libbb.h"
    1715#include "unarchive.h"
    18 #include "libbb.h"
    19 
    20 #ifdef CONFIG_FEATURE_TAR_GNU_EXTENSIONS
    21 static char *longname = NULL;
    22 static char *linkname = NULL;
    23 #endif
    24 
     16
     17#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS
     18static char *longname;
     19static char *linkname;
     20#else
     21enum {
     22    longname = 0,
     23    linkname = 0,
     24};
     25#endif
     26
     27/* NB: _DESTROYS_ str[len] character! */
     28static unsigned long long getOctal(char *str, int len)
     29{
     30    unsigned long long v;
     31    /* Actually, tar header allows leading spaces also.
     32     * Oh well, we will be liberal and skip this...
     33     * The only downside probably is that we allow "-123" too :)
     34    if (*str < '0' || *str > '7')
     35        bb_error_msg_and_die("corrupted octal value in tar header");
     36    */
     37    str[len] = '\0';
     38    v = strtoull(str, &str, 8);
     39    if (*str && (!ENABLE_FEATURE_TAR_OLDGNU_COMPATIBILITY || *str != ' '))
     40        bb_error_msg_and_die("corrupted octal value in tar header");
     41    return v;
     42}
     43#define GET_OCTAL(a) getOctal((a), sizeof(a))
     44
     45void BUG_tar_header_size(void);
    2546char get_header_tar(archive_handle_t *archive_handle)
    2647{
     48    static smallint end;
     49
    2750    file_header_t *file_header = archive_handle->file_header;
    28     union {
     51    struct {
    2952        /* ustar header, Posix 1003.1 */
    30         unsigned char raw[512];
    31         struct {
    32             char name[100]; /*   0-99 */
    33             char mode[8];   /* 100-107 */
    34             char uid[8];    /* 108-115 */
    35             char gid[8];    /* 116-123 */
    36             char size[12];  /* 124-135 */
    37             char mtime[12]; /* 136-147 */
    38             char chksum[8]; /* 148-155 */
    39             char typeflag;  /* 156-156 */
    40             char linkname[100]; /* 157-256 */
    41             char magic[6];  /* 257-262 */
    42             char version[2];    /* 263-264 */
    43             char uname[32]; /* 265-296 */
    44             char gname[32]; /* 297-328 */
    45             char devmajor[8];   /* 329-336 */
    46             char devminor[8];   /* 337-344 */
    47             char prefix[155];   /* 345-499 */
    48             char padding[12];   /* 500-512 */
    49         } formated;
     53        char name[100];     /*   0-99 */
     54        char mode[8];       /* 100-107 */
     55        char uid[8];        /* 108-115 */
     56        char gid[8];        /* 116-123 */
     57        char size[12];      /* 124-135 */
     58        char mtime[12];     /* 136-147 */
     59        char chksum[8];     /* 148-155 */
     60        char typeflag;      /* 156-156 */
     61        char linkname[100]; /* 157-256 */
     62        char magic[6];      /* 257-262 */
     63        char version[2];    /* 263-264 */
     64        char uname[32];     /* 265-296 */
     65        char gname[32];     /* 297-328 */
     66        char devmajor[8];   /* 329-336 */
     67        char devminor[8];   /* 337-344 */
     68        char prefix[155];   /* 345-499 */
     69        char padding[12];   /* 500-512 */
    5070    } tar;
    51     long sum = 0;
    52     long i;
    53     static int end = 0;
    54 
     71    char *cp;
     72    int i, sum_u, sum;
     73#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
     74    int sum_s;
     75#endif
     76    int parse_names;
     77
     78    if (sizeof(tar) != 512)
     79        BUG_tar_header_size();
     80
     81#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS
     82 again:
     83#endif
    5584    /* Align header */
    5685    data_align(archive_handle, 512);
    5786
    58     if (bb_full_read(archive_handle->src_fd, tar.raw, 512) != 512) {
    59         /* Assume end of file */
    60         bb_error_msg_and_die("Short header");
    61         //return(EXIT_FAILURE);
    62     }
     87 again_after_align:
     88
     89    xread(archive_handle->src_fd, &tar, 512);
    6390    archive_handle->offset += 512;
    6491
    6592    /* If there is no filename its an empty header */
    66     if (tar.formated.name[0] == 0) {
     93    if (tar.name[0] == 0) {
    6794        if (end) {
    6895            /* This is the second consecutive empty header! End of archive!
    6996             * Read until the end to empty the pipe from gz or bz2
    7097             */
    71             while (bb_full_read(archive_handle->src_fd, tar.raw, 512) == 512);
    72             return(EXIT_FAILURE);
     98            while (full_read(archive_handle->src_fd, &tar, 512) == 512)
     99                /* repeat */;
     100            return EXIT_FAILURE;
    73101        }
    74102        end = 1;
    75         return(EXIT_SUCCESS);
     103        return EXIT_SUCCESS;
    76104    }
    77105    end = 0;
     
    80108     * 0's are for the old tar format
    81109     */
    82     if (strncmp(tar.formated.magic, "ustar", 5) != 0) {
    83 #ifdef CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY
    84         if (strncmp(tar.formated.magic, "\0\0\0\0\0", 5) != 0)
    85 #endif
    86             bb_error_msg_and_die("Invalid tar magic");
    87     }
    88     /* Do checksum on headers */
    89     for (i =  0; i < 148 ; i++) {
    90         sum += tar.raw[i];
    91     }
    92     sum += ' ' * 8;
    93     for (i =  156; i < 512 ; i++) {
    94         sum += tar.raw[i];
    95     }
    96     if (sum != strtol(tar.formated.chksum, NULL, 8)) {
    97         bb_error_msg("Invalid tar header checksum");
    98         return(EXIT_FAILURE);
    99     }
    100 
    101 #ifdef CONFIG_FEATURE_TAR_GNU_EXTENSIONS
     110    if (strncmp(tar.magic, "ustar", 5) != 0) {
     111#if ENABLE_FEATURE_TAR_OLDGNU_COMPATIBILITY
     112        if (memcmp(tar.magic, "\0\0\0\0", 5) != 0)
     113#endif
     114            bb_error_msg_and_die("invalid tar magic");
     115    }
     116
     117    /* Do checksum on headers.
     118     * POSIX says that checksum is done on unsigned bytes, but
     119     * Sun and HP-UX gets it wrong... more details in
     120     * GNU tar source. */
     121#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
     122    sum_s = ' ' * sizeof(tar.chksum);
     123#endif
     124    sum_u = ' ' * sizeof(tar.chksum);
     125    for (i = 0; i < 148; i++) {
     126        sum_u += ((unsigned char*)&tar)[i];
     127#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
     128        sum_s += ((signed char*)&tar)[i];
     129#endif
     130    }
     131    for (i = 156; i < 512; i++) {
     132        sum_u += ((unsigned char*)&tar)[i];
     133#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
     134        sum_s += ((signed char*)&tar)[i];
     135#endif
     136    }
     137#if ENABLE_FEATURE_TAR_OLDGNU_COMPATIBILITY
     138    sum = strtoul(tar.chksum, &cp, 8);
     139    if ((*cp && *cp != ' ')
     140     || (sum_u != sum USE_FEATURE_TAR_OLDSUN_COMPATIBILITY(&& sum_s != sum))
     141    ) {
     142        bb_error_msg_and_die("invalid tar header checksum");
     143    }
     144#else
     145    /* This field does not need special treatment (getOctal) */
     146    sum = xstrtoul(tar.chksum, 8);
     147    if (sum_u != sum USE_FEATURE_TAR_OLDSUN_COMPATIBILITY(&& sum_s != sum)) {
     148        bb_error_msg_and_die("invalid tar header checksum");
     149    }
     150#endif
     151
     152    /* 0 is reserved for high perf file, treat as normal file */
     153    if (!tar.typeflag) tar.typeflag = '0';
     154    parse_names = (tar.typeflag >= '0' && tar.typeflag <= '7');
     155
     156    /* getOctal trashes subsequent field, therefore we call it
     157     * on fields in reverse order */
     158    if (tar.devmajor[0]) {
     159        unsigned minor = GET_OCTAL(tar.devminor);
     160        unsigned major = GET_OCTAL(tar.devmajor);
     161        file_header->device = makedev(major, minor);
     162    }
     163    file_header->link_target = NULL;
     164    if (!linkname && parse_names && tar.linkname[0]) {
     165        /* we trash magic[0] here, it's ok */
     166        tar.linkname[sizeof(tar.linkname)] = '\0';
     167        file_header->link_target = xstrdup(tar.linkname);
     168        /* FIXME: what if we have non-link object with link_target? */
     169        /* Will link_target be free()ed? */
     170    }
     171    file_header->mtime = GET_OCTAL(tar.mtime);
     172    file_header->size = GET_OCTAL(tar.size);
     173    file_header->gid = GET_OCTAL(tar.gid);
     174    file_header->uid = GET_OCTAL(tar.uid);
     175    /* Set bits 0-11 of the files mode */
     176    file_header->mode = 07777 & GET_OCTAL(tar.mode);
     177
     178    file_header->name = NULL;
     179    if (!longname && parse_names) {
     180        /* we trash mode[0] here, it's ok */
     181        tar.name[sizeof(tar.name)] = '\0';
     182        if (tar.prefix[0]) {
     183            /* and padding[0] */
     184            tar.prefix[sizeof(tar.prefix)] = '\0';
     185            file_header->name = concat_path_file(tar.prefix, tar.name);
     186        } else
     187            file_header->name = xstrdup(tar.name);
     188    }
     189
     190    /* Set bits 12-15 of the files mode */
     191    /* (typeflag was not trashed because chksum does not use getOctal) */
     192    switch (tar.typeflag) {
     193    /* busybox identifies hard links as being regular files with 0 size and a link name */
     194    case '1':
     195        file_header->mode |= S_IFREG;
     196        break;
     197    case '7':
     198    /* case 0: */
     199    case '0':
     200#if ENABLE_FEATURE_TAR_OLDGNU_COMPATIBILITY
     201        if (last_char_is(file_header->name, '/')) {
     202            file_header->mode |= S_IFDIR;
     203        } else
     204#endif
     205        file_header->mode |= S_IFREG;
     206        break;
     207    case '2':
     208        file_header->mode |= S_IFLNK;
     209        break;
     210    case '3':
     211        file_header->mode |= S_IFCHR;
     212        break;
     213    case '4':
     214        file_header->mode |= S_IFBLK;
     215        break;
     216    case '5':
     217        file_header->mode |= S_IFDIR;
     218        break;
     219    case '6':
     220        file_header->mode |= S_IFIFO;
     221        break;
     222#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS
     223    case 'L':
     224        /* free: paranoia: tar with several consecutive longnames */
     225        free(longname);
     226        /* For paranoia reasons we allocate extra NUL char */
     227        longname = xzalloc(file_header->size + 1);
     228        /* We read ASCIZ string, including NUL */
     229        xread(archive_handle->src_fd, longname, file_header->size);
     230        archive_handle->offset += file_header->size;
     231        /* return get_header_tar(archive_handle); */
     232        /* gcc 4.1.1 didn't optimize it into jump */
     233        /* so we will do it ourself, this also saves stack */
     234        goto again;
     235    case 'K':
     236        free(linkname);
     237        linkname = xzalloc(file_header->size + 1);
     238        xread(archive_handle->src_fd, linkname, file_header->size);
     239        archive_handle->offset += file_header->size;
     240        /* return get_header_tar(archive_handle); */
     241        goto again;
     242    case 'D':   /* GNU dump dir */
     243    case 'M':   /* Continuation of multi volume archive */
     244    case 'N':   /* Old GNU for names > 100 characters */
     245    case 'S':   /* Sparse file */
     246    case 'V':   /* Volume header */
     247#endif
     248    case 'g':   /* pax global header */
     249    case 'x': { /* pax extended header */
     250        off_t sz;
     251        bb_error_msg("warning: skipping header '%c'", tar.typeflag);
     252        sz = (file_header->size + 511) & ~(off_t)511;
     253        archive_handle->offset += sz;
     254        sz >>= 9; /* sz /= 512 but w/o contortions for signed div */
     255        while (sz--)
     256            xread(archive_handle->src_fd, &tar, 512);
     257        /* return get_header_tar(archive_handle); */
     258        goto again_after_align;
     259    }
     260    default:
     261        bb_error_msg_and_die("unknown typeflag: 0x%x", tar.typeflag);
     262    }
     263
     264#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS
    102265    if (longname) {
    103266        file_header->name = longname;
    104267        longname = NULL;
    105268    }
    106     else if (linkname) {
    107         file_header->name = linkname;
     269    if (linkname) {
     270        file_header->link_target = linkname;
    108271        linkname = NULL;
    109     } else
    110 #endif
    111     {
    112         file_header->name = bb_xstrndup(tar.formated.name,100);
    113 
    114         if (tar.formated.prefix[0]) {
    115             char *temp = file_header->name;
    116             file_header->name = concat_path_file(tar.formated.prefix, temp);
    117             free(temp);
    118         }
    119     }
    120 
    121     file_header->uid = strtol(tar.formated.uid, NULL, 8);
    122     file_header->gid = strtol(tar.formated.gid, NULL, 8);
    123     file_header->size = strtol(tar.formated.size, NULL, 8);
    124     file_header->mtime = strtol(tar.formated.mtime, NULL, 8);
    125     file_header->link_name = (tar.formated.linkname[0] != '\0') ?
    126         bb_xstrdup(tar.formated.linkname) : NULL;
    127     file_header->device = makedev(strtol(tar.formated.devmajor, NULL, 8),
    128         strtol(tar.formated.devminor, NULL, 8));
    129 
    130     /* Set bits 0-11 of the files mode */
    131     file_header->mode = 07777 & strtol(tar.formated.mode, NULL, 8);
    132 
    133     /* Set bits 12-15 of the files mode */
    134     switch (tar.formated.typeflag) {
    135     /* busybox identifies hard links as being regular files with 0 size and a link name */
    136     case '1':
    137         file_header->mode |= S_IFREG;
    138         break;
    139     case '7':
    140         /* Reserved for high performance files, treat as normal file */
    141     case 0:
    142     case '0':
    143 #ifdef CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY
    144         if (last_char_is(file_header->name, '/')) {
    145             file_header->mode |= S_IFDIR;
    146         } else
    147 #endif
    148             file_header->mode |= S_IFREG;
    149         break;
    150     case '2':
    151         file_header->mode |= S_IFLNK;
    152         break;
    153     case '3':
    154         file_header->mode |= S_IFCHR;
    155         break;
    156     case '4':
    157         file_header->mode |= S_IFBLK;
    158         break;
    159     case '5':
    160         file_header->mode |= S_IFDIR;
    161         break;
    162     case '6':
    163         file_header->mode |= S_IFIFO;
    164         break;
    165 #ifdef CONFIG_FEATURE_TAR_GNU_EXTENSIONS
    166     case 'L': {
    167             longname = xzalloc(file_header->size + 1);
    168             archive_xread_all(archive_handle, longname, file_header->size);
    169             archive_handle->offset += file_header->size;
    170 
    171             return(get_header_tar(archive_handle));
    172         }
    173     case 'K': {
    174             linkname = xzalloc(file_header->size + 1);
    175             archive_xread_all(archive_handle, linkname, file_header->size);
    176             archive_handle->offset += file_header->size;
    177 
    178             file_header->name = linkname;
    179             return(get_header_tar(archive_handle));
    180         }
    181     case 'D':   /* GNU dump dir */
    182     case 'M':   /* Continuation of multi volume archive*/
    183     case 'N':   /* Old GNU for names > 100 characters */
    184     case 'S':   /* Sparse file */
    185     case 'V':   /* Volume header */
    186 #endif
    187     case 'g':   /* pax global header */
    188     case 'x':   /* pax extended header */
    189         bb_error_msg("Ignoring extension type %c", tar.formated.typeflag);
    190         break;
    191     default:
    192         bb_error_msg("Unknown typeflag: 0x%x", tar.formated.typeflag);
    193     }
    194     {   /* Strip trailing '/' in directories */
    195         /* Must be done after mode is set as '/' is used to check if its a directory */
    196         char *tmp = last_char_is(file_header->name, '/');
    197         if (tmp) {
    198             *tmp = '\0';
    199         }
    200     }
     272    }
     273#endif
     274    if (!strncmp(file_header->name, "/../"+1, 3)
     275     || strstr(file_header->name, "/../")
     276    ) {
     277        bb_error_msg_and_die("name with '..' encountered: '%s'",
     278                file_header->name);
     279    }
     280
     281    /* Strip trailing '/' in directories */
     282    /* Must be done after mode is set as '/' is used to check if it's a directory */
     283    cp = last_char_is(file_header->name, '/');
    201284
    202285    if (archive_handle->filter(archive_handle) == EXIT_SUCCESS) {
    203286        archive_handle->action_header(archive_handle->file_header);
     287        /* Note that we kill the '/' only after action_header() */
     288        /* (like GNU tar 1.15.1: verbose mode outputs "dir/dir/") */
     289        if (cp) *cp = '\0';
    204290        archive_handle->flags |= ARCHIVE_EXTRACT_QUIET;
    205291        archive_handle->action_data(archive_handle);
     
    207293    } else {
    208294        data_skip(archive_handle);
     295        free(file_header->name);
    209296    }
    210297    archive_handle->offset += file_header->size;
    211298
    212     free(file_header->link_name);
    213 
    214     return(EXIT_SUCCESS);
     299    free(file_header->link_target);
     300    /* Do not free(file_header->name)! */
     301
     302    return EXIT_SUCCESS;
    215303}
Note: See TracChangeset for help on using the changeset viewer.