source: trunk/mindi/rootfs/sbin/init @ 30

Last change on this file since 30 was 30, checked in by bcornec, 14 years ago

Id property added on files to allow for better conf. management

  • Property svn:keywords set to Id
File size: 20.0 KB
Line 
1#!/bin/sh
2#
3# 04/20/2005
4# - fix for 'skip the tape datadisks' bug (Joseph Smith)
5#
6# 10/13/2004
7# - echo 0 > /proc/sys/kernel/exec-shield to disable exec-shield
8#
9# 07/25
10# - removed sbminst
11#
12# 06/25
13# - klogd -c 2 (was -c 5)
14#
15# 06/21
16# - experimented w/ calling ctrlaltdel to setup soft reset
17# - don't softlink /var/log
18#
19# 06/16
20# - insmod dm_mod as well as dm-mod
21#
22# 05/24
23# - added Andree's vc.tgz
24#
25# 05/14
26# - open => openvt (part of busybox)
27# - nash removed. dm.tgz added
28#
29# 04/21
30# - compare original lsmod output w/ new lsmod output
31#
32# 04/13
33# - mount /sys if appropriate
34#
35# 04/03
36# - use 'dd if=$tapedev bs=32k count=1024' instead of 'tar -zxf $tapedev'
37#   to extract aux datadisk files from tape
38#
39# 25/03
40# - wait 7s, not 2s, while installing modules
41#
42# 18/01/2004
43# - logging mondo-restore.cfg, not mondo-restore.log --- FIXED
44#
45# 11/23/2003
46# - if find-and-mount-cdrom fails once, try again
47# - open scrolling log of /tmp/mondo-restore.log later than previously
48#
49# 11/18
50# - disabled clear()'s
51# - reboot at end
52#
53# 11/15
54# - softlink /var/log to /tmp/tmpfs/var/log
55# - klogd -c 5 now (was -c 1)
56#
57# 11/10
58# - don't call mondorestore if backup-media-type is not specified in
59#   config file /tmp/mondo-restore.cfg
60#
61# 10/21
62# - softlink nano to pico if nano found
63#
64# 10/16
65# - create /dev/md/* softlinks if necessary
66#
67# 10/12
68# - start devfs if /tmp/USE-DEVFS found
69# - create simple /etc/devfsd.conf file
70#
71# 10/09
72# - try various mount commands to get tmpfs online (use initiative)
73#
74# 09/24
75# - also try /dev/st0, /dev/osst0, /dev/ht0 if [tapedev] fails
76# - modify media-dev in mondo-restore.cfg if we succeed :)
77#
78# 09/15
79# - create /tmp/null and /tmp/stdout and /tmp/stderr
80#   as copies of the real thing, just in case partimagehack
81#   still uses them
82#
83# 08/01
84# - tmpfs ramdisk is now 48m
85#
86# 07/14
87# - added mkdirs at start
88#
89# 06/04
90# - remount root as rw just in case
91#
92# 05/04
93# - replaced /mnt/groovy-stuff with $GROOVY
94#
95# 04/30
96# - if your CD was created by Mondoarchive when it backed up
97#   to ISO(s) then re-jig tmp/mondo-restore.cfg accordingly;
98#   this is nec. if you backup to a hard disk directory but
99#   then burn the ISOs to physical CDs
100#
101# 04/26
102# - offer user the chance to specify another tape device, if
103#   the one they specified at backup-time refuses to act as
104#   aux data disk at boot-time
105#
106# 04/21
107# - start scsi if cciss
108# - use ataraid.tgz too
109#
110# 05/03
111# - mount / -o rw,remount at end, just in case
112#   RH9 futzes with the mountpoint
113#
114# 04/04
115# - increased tmpfs ramdisk size from 34m to 38m
116#
117# 01/01 - 01/31/2003
118# - fixed issue with LVM and SW Raid devices (Brian Borgeson)
119# - friendlier 'upgrade your ram' msg
120# - better fallback msg
121# - if /tmp/2880.siz exists then assume boot CD
122#
123# 11/01 - 12/31/2002
124# - updated intro msg
125# - if /dev/boot_device and /BOOTLOADER.DEVICE exist then
126#   copy device /dev/boot_device to pathname contained
127#   in /BOOTLOADER.DEVICE text file
128#
129# 04/01 - 08/31/2002
130# - handle new 'backup_media_type' entry in mondo-restore.cfg
131# - added 'sleep 2' at start of WelcomeMessage
132# - disabled a silly 'abort' line at end
133# - better handling of devfs (DuckX) --- new RunDevfsd()
134# - assume start-nfs is in /sbin
135# - extract rd.tgz, raw.tgz, ida.tgz, cciss.tgz to /; they include
136#   /dev entries which would otherwise fill up the ramdisk at bkp-time
137#
138# 01/01 - 03/31/2002
139# - Carl Wilhelm Soderstrom disabled exec sh; replaced with exit 1
140# - if you are an idiot & your computer has very little RAM,
141#   this script will no longer abort; it will merely warn you
142# - run chmod 755 `which start-nfs` before running start-nfs
143# - use a ramdisk for /tmp (after copying old /tmp stuff into it)
144# - fixed segfaults ('open') by replacing 'sh' call with '/bin/sh' call
145# - changed LaunchTerminals() to try to work with newly-compiled 'open'
146# - don't write 'start-nfs error' if start-nfs doesn't exist; just go on
147# - added tmpfs and some space-checking
148# - cleaned up script
149# - added stuff to start NFS services if necessary
150# - reordered some of the main() stuff, for elegance's sake
151# - added Petris and 'tail -f /tmp/mondo-restore.log' to LaunchTerminals()
152# - changed /usr/share/ to /usr/local/
153#
154# 2001
155# - fix some typos
156# - added lots of cool stuff to make Mindi _nearly_ boot from tape
157# - restructured the welcome msg echoed to screen
158# - broke up spaghetti code; made lots of subroutines
159#
160#------------------------------------------------------------
161
162
163CaughtSoftReset() {
164    trap SIGTERM
165    reboot
166}
167
168
169ConfigureLoggingDaemons() {
170    echo -en "Running klogd..."
171    klogd -c 2 > /dev/null 2> /dev/null
172    echo -en "Done.\nRunning syslogd..."
173    syslogd > /dev/null 2> /dev/null
174    echo "Done."
175    LogIt "klogd and syslogd have been started."
176}
177
178
179
180CopyBootDevEntry() {
181    local outfile devfile
182    devfile=/dev/boot_device
183    outfile=`cat /BOOTLOADER.DEVICE 2> /dev/null`
184    [ ! "$outfile" ] && return 0
185    echo -en "Copying boot device to $outfile..."
186    if [ -e "$outfile" ] ; then
187    echo "OK."
188    return 0
189    fi
190    mkdir -p $outfile
191    rmdir $outfile
192    cp -pRdf $devfile $outfile
193    if [ "$?" -ne "0" ] ; then
194    echo "Failed."
195    return 1
196    else
197    echo "OK."
198    return 0
199    fi
200}
201
202
203
204Die() {
205    LogIt "Fatal error! $1" 1
206    exit 1
207}
208
209
210
211ExtractDevTarballs() {
212    cd /
213    for fname in ataraid.tgz ida.tgz rd.tgz raw.tgz cciss.tgz nst.tgz dm.tgz vc.tgz ; do
214        if [ ! -e "/$fname" ] ; then
215            LogIt "/$fname not found; cannot extract to /." 1
216        else
217            echo -en "\rExtracting /$fname...     "
218            tar -zxf /$fname || LogIt "Error occurred while extracting /$fname"
219        fi
220    done
221    echo -en "\r"
222    LogIt "Extracted additional /dev entries OK.     " 1
223}
224
225
226
227LaunchTerminals() {
228    openvt 2 /bin/sh
229    openvt 3 /bin/sh
230    openvt 4 /bin/sh
231    openvt 5 /bin/sh
232    openvt 6 /bin/sh
233    openvt 7 /bin/sh /sbin/wait-for-petris
234#    openvt 8 /usr/bin/tail -f /tmp/mondo-restore.log
235}
236
237
238LoadKeymap() {
239    local fname
240    fname=`cat /tmp/KEYMAP-LIVES-HERE 2> /dev/null`
241    [ "$fname" = "" ] && return
242    if which loadkeys > /dev/null 2> /dev/null ; then
243        loadkeys $fname
244# loadkmap != loadkeys
245#    elif which loadkmap > /dev/null 2> /dev/null ; then
246#        loadkmap < $fname
247    else
248        LogIt "Using default keyboard map." 1
249    fi
250}
251
252
253UntarTapeStuff() {
254    local old_pwd res
255    old_pwd=`pwd`
256    cd $GROOVY
257    [ "$1" != "" ] && tapedev=$1
258    [ ! "$tapedev" ] && tapedev=`cat /tmp/mondo-restore.cfg | grep media-dev | tr -s ' ' ' ' | cut -d' ' -f2`
259#    tar -zxf $tapedev
260    dd if=$tapedev bs=32k count=1024 | tar -zx
261    res=$?
262    if [ "$res" -eq "0" ] ; then
263    cat /tmp/mondo-restore.cfg | grep -v media-dev > /tmp/mr.cfg
264    echo "media-dev $tapedev" >> /tmp/mr.cfg
265        cp -f /tmp/mr.cfg /tmp/mondo-restore.cfg
266    fi
267    cd $old_pwd
268    return $res
269}
270
271HandleTape() {
272    local res tapedev
273    tapedev="" ; # will be set by UntarTapeStuff()
274    cd $GROOVY
275    UntarTapeStuff $tapedev || UntarTapeStuff /dev/st0 || UntarTapeStuff /dev/osst0 || UntarTapeStuff /dev/ht0
276    res=$?
277    while [ "$res" -ne "0" ] ; do
278        LogIt "$tapedev failed to act as extended data disk for booting." 1
279        LogIt "Please specify an alternate tape device," 1
280        LogIt "or hit <Enter> to boot from CD/floppies." 1
281        echo -en "---> "
282        read tapedev
283        if [ "$tapedev" ] ; then
284            LogIt "User specified $tapedev instead"
285            UntarTapeStuff $tapedev
286            res=$?
287        else
288            LogIt "User opted not to specify an alternate tapedev"
289            res=1
290        break
291        fi
292    done
293
294    if [ "$res" -ne "0" ] ; then
295    cd /
296    LogIt "Failed to use tape as extended datadisk. Reverting to floppies." 1
297    HandleCDROMorFloppies
298    res=$?
299    else
300#   clear
301    LogIt "Using tape as extended datadisk. Good." 3
302    echo "Using tape as extd ddisk." > /tmp/TAPEDEV-HAS-DATA-DISKS
303    res=0
304        CD_MOUNTED_OK=yes
305    fi
306    return $res
307}
308
309
310
311HandleCDROMorFloppies() {
312    find-and-mount-cdrom
313    res=$?
314    if [ "$res" -ne "0" ] ; then
315    LogIt "First call to find-and-mount-cdrom failed." 1
316    LogIt "Sleeping for 3 seconds and trying again." 1
317    sleep 3
318    find-and-mount-cdrom
319    res=$?
320    fi
321    if [ "$res" -eq "0" ] ; then
322#        clear
323    LogIt "OK, I am running on a CD-ROM. Good." 3
324        CD_MOUNTED_OK=yes
325    elif [ "$res" -eq "1" ] ; then
326#        clear
327    LogIt "OK, I am running on floppies. Good." 3
328    CD_MOUNTED_OK=""
329    else
330    LogIt "OK, I am falling back to floppy mode." 3
331        LogIt "That means you'll have to copy the data disk images from" 3
332        LogIt "the CD/hard disk/whatever to physical 1.44MB disks and" 3
333        LogIt "insert them, one after the other. Please see the manual." 3
334        LogIt "The images are in /images on the CD, or /root/images/mindi" 3
335        LogIt "on your hard disk. Your archives are probably fine but" 3
336        LogIt "your tape streamer and/or CD-ROM drive are eccentric. :-)" 3
337    CD_MOUNTED_OK=""
338    fi
339    return 0
340}
341
342
343HowMuchFreeSpaceOnRamdisk() {
344   df -m | grep /dev/ram | head -n1 | tr -s '\t' ' ' | cut -d' ' -f4
345}
346
347
348
349InsertEssentialModules() {
350    for j in 1 2 3 4 5 ; do
351        for i in `ls /*.*o* 2> /dev/null` ; do
352            [ -f "$i" ] && MyInsmod $i > /dev/null 2> /dev/null
353        done
354    done
355}
356
357
358
359PauseForRaids() {
360    if [ "`dmesg | grep -i "RAID Controller"`" != "" ] || [ "`dmesg | grep -i "Vendor: 3ware"`" != "" ] ; then
361        LogIt "RAID controller(s) detected. Pausing 10 seconds to let them warm up." 1
362        echo -en "Pausing..."
363        for i in 1 2 3 4 5 6 7 8 9 10 ; do
364            sleep 1
365            echo -en "$(($i*10))%..."
366        done
367        echo "Done."
368    fi
369}
370
371
372# 06/13/2002 --- DuckX's & Hugo's new routine
373# 10/11/2003 --- added a simple devfsd.conf file
374# 01/24/2005 --- cater for arbitrary locations of devfsd.conf by using the
375#                config file path compiled into devfsd
376RunDevfsd() {
377    loc=`which devfsd 2> /dev/null`
378    if [ "$loc" != "" ] ; then
379    LogIt "Devfs found. Testing kernel support..."
380    if [ ! -e "/dev/.devfsd" ] ; then
381        mount -t devfs devfs /dev 2>> /tmp/mondo-restore.log
382            if [ "$?" -ne "0" ] ; then
383        LogIt "Error while trying to mount devfs"
384        else
385        LogIt "Devfs mounted OK"
386        fi
387    fi
388    #check if the kernel supports devfs
389    if [ -e "/dev/.devfsd" ] ; then
390        [ -d "/proc/1" ] || mount -n /proc
391        LogIt "Kernel support found. Creating config file and starting devfsd"
392        conffile=`strings $loc | grep "devfsd.conf$"`
393        [ "$conffile" ] || conffile="/etc/devfsd.conf"
394        confpath=`echo $conffile | sed "s/\/devfsd\.conf$//"`
395        [ -d "$confpath" ] || mkdir -p $confpath
396        echo -en "REGISTER .* MKOLDCOMPAT\nUNREGISTER .* RMOLDCOMPAT\n" > $conffile
397        devfsd /dev &
398        sleep 5
399    else
400        LogIt "No devfs kernel support."
401    fi
402    fi
403}
404
405
406
407
408
409
410#RunDevfsd() {
411#    loc=`which devfsd 2> /dev/null`
412#    if [ "$loc" != "" ] ; then
413#        LogIt "Starting devfsd"
414#        devfsd /dev &
415#        sleep 5
416#    fi
417#}
418
419
420
421SpaceTests() {
422    [ -e "/tmp/filelist.full" ] && cp /tmp/filelist.full /tmp/FLF
423    if [ "`HowMuchFreeSpaceOnRamdisk`" -le "3" ] ; then
424        LogIt "Ramdisk is a bit smaller than I would like." 1
425        LogIt "Please re-run Mondo/Mindi but edit /usr/local/mindi first" 1
426        LogIt "and set EXTRA_SPACE to something high, e.g. 8000" 1
427        Die "Aborting. Please reboot."
428    fi
429    rm -f /tmp/FLF
430}
431
432
433
434StartLvms() {
435    if [ -e "/tmp/i-want-my-lvm" ] ; then
436        LogIt "Scanning LVM's..." 1
437    if which lvm ; then
438        MyInsmod dm-mod
439        MyInsmod dm_mod
440        lvm vgscan --mknodes
441    else
442        vgscan
443    fi
444        cat /tmp/i-want-my-lvm | grep -E "^#.*vgchange" | sed s/#// > /tmp/start-lvm
445        chmod +x /tmp/start-lvm
446        echo -en "Starting LVM's..."
447        /tmp/start-lvm &
448        for i in 1 2 3 4 5 ; do
449        echo -en "."
450        sleep 1
451        done
452        echo "Done."
453    fi
454# If necessary, cannibalize 'analyze-my-lvm'; copy some of its code here,
455# pipe vgscan's output, strip it, run 'vgchange' on its output, etc.etc.
456    LogIt "LVM's have been started."
457}
458
459
460
461StartNfs() {
462    # using mount -o nolock avoids portmap requirement
463    #if which portmap > /dev/null 2> /dev/null ; then
464        #LogIt "Running portmap"
465    #portmap
466        #[ "$?" -eq "0" ] && LogIt "Portmap started OK" || LogIt "Portmap error"
467        if [ -e "/sbin/start-nfs" ] ; then
468            chmod 755 /sbin/start-nfs
469        LogIt "Starting NFS..."
470            /sbin/start-nfs
471        fi
472    #fi
473}
474
475
476StartRaids() {
477    local raid_devices i
478    raid_devices=`cat /tmp/mountlist.txt | grep /dev/md | cut -d' ' -f1`
479    for i in $raid_devices ; do
480        if cat /proc/mdstat | grep `basename $i` > /dev/null 2> /dev/null ; then
481            LogIt "$i is started already; no need to run 'raidstart $i'" 1
482        else
483        LogIt "Running 'raidstart $i'" 1
484        raidstart $i
485        fi
486#        sleep 1
487    done
488#    [ "$raid_devices" != "" ] && PauseForRaid
489}
490
491
492SwapTheMountExecs() {
493    if [ -e "/bin/mount.libc5" ] ; then
494        LogIt "Swapping busybox's mount with libc5 mount"
495        mv /bin/mount /bin/mount.bb
496        mv /bin/mount.libc5 /bin/mount
497        sync
498    fi
499}
500
501
502TryAgainToFindCD() {
503    local res
504    mount | grep /mnt/cdrom && return 0
505    [ "`cat /tmp/mondo-restore.cfg | grep "backup_media_type" | grep "cdstream"`" ] && return
506    LogIt "Trying to mount CD-ROM a 2nd time..."
507    find-and-mount-cdrom --second-try
508    res=$?
509    if [ "$res" -eq "0" ] ; then
510        CD_MOUNTED_OK=yes
511        LogIt "CD-ROM drive mounted successfully." 1
512    else
513        LogIt "I still cannot find or mount the CD-ROM drive, by the way."
514    fi
515}
516
517
518
519UseTmpfs()
520{
521    local mount_cmd
522    echo -en "Mounting /tmp/tmpfs..."
523    mkdir -p /tmp/tmpfs
524# For technical reasons, some sets are as large as 16MB.
525# I am allowing 32MB because selective restore occupies a lot of space.
526    for size in 64m 48m 40m 32m ; do
527        mount_cmd="mount /dev/shm -t tmpfs -o size=$size" ; # was 34m until 04/2003
528        LogIt "Trying '$mount_cmd'"
529    $mount_cmd /tmp/tmpfs 2>> /tmp/mondo-restore.log
530    res=$?
531    [ "$res" -eq "0" ] && break
532    done
533    if [ "$res" -ne "0" ] ; then
534        LogIt "Failed. I could not run '$mount_cmd /tmp/tmpfs'. Your kernel is BROKEN or you do not have enough RAM." 1
535        umount /tmp/tmpfs > /dev/null 2> /dev/null
536    rmdir /tmp/tmpfs
537        ln -sf /mnt/RESTORING/tmp /tmp/tmpfs; # used by mondo-restore
538    LogIt "Failed to mount /tmp/tmpfs; using ugly softlink instead"
539    else
540        LogIt "Great. Pivot succeeded w/ size=$size" 1
541        echo -en "Pivoting /tmp..."
542        umount /tmp/tmpfs
543        mkdir -p /tmp.old
544        mv -f /tmp/* /tmp.old/
545        $mount_cmd /tmp
546        mv /tmp.old/* /tmp/
547        rmdir /tmp.old
548        mkdir -p /tmp/tmpfs
549        mkdir -p $GROOVY
550    echo "Done."
551    LogIt "Successfully mounted dynamic /tmp ramdisk"
552#   mkdir -p /tmp/tmpfs/var
553#        mv -f /var/log /tmp/tmpfs/var/log
554#        ln -sf /tmp/tmpfs/var/log /var/log
555    fi
556}
557
558
559WelcomeMessage()
560{
561    echo "********************************************************************"
562    echo "MINDI-LINUX by Hugo Rabson --- web site: http://www.mondorescue.org"
563    echo "Boot disk based on AlfaLinux & Trinux. BusyBox by Erik Andersen."
564which petris > /dev/null 2> /dev/null && echo "Petris was written by Peter Seidler <p.seidler@mail1.stofanet.dk>."
565    echo "Executables and source code are covered by the GNU GPL. No warranty."
566    echo "running on $ARCH"
567    echo "********************************************************************"
568}
569
570
571EnableCcissIfAppropriate() {
572    local i fname
573    for i in 0 1 2 3 ; do
574    fname="/proc/driver/cciss/cciss$i"
575    if [ -e "$fname" ] ; then
576        LogIt "Engaging $fname"
577        echo "engage scsi" > $fname
578        LogIt "...result=$?"
579    fi
580    done
581}
582
583
584
585# ------------------------ main -----------------------
586
587trap CaughtSoftReset SIGTERM
588LOGFILE=/tmp/mondo-restore.log
589PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/mondo:/usr/local/mondo:/usr/local/mindi:.
590GROOVY=/tmp/groovy-stuff
591USER=root
592export PATH GROOVY USER
593
594mount -o remount rw /
595[ ! "$GROOVY" ] && Die "I'm not groovy!"
596for i in $GROOVY /mnt/floppy /mnt/cdrom /mnt/isodir /var/local/petris /tmp/isodir; do
597    mkdir -p $i
598done
599#/bin/update
600mount /proc/ /proc -v -t proc
601mkdir /sys 2> /dev/null
602mount /sys/ /sys -v -t sysfs 2>> $LOGFILE
603rm -f /foozero
604
605echo 0 > /proc/sys/kernel/exec-shield 2>> /dev/null
606
607ExtractDevTarballs
608LaunchTerminals
609InsertEssentialModules
610EnableCcissIfAppropriate
611#-------------------------------
612#WHOLIVESINAPINEAPPLEUNDERTHESEA#;# --- don't touch this :)
613#-------------------------------
614UseTmpfs
615# Allows PXE boot by starting NFS earlier
616StartNfs
617if [ ! -e "/tmp/mondo-restore.cfg" ] ; then
618    LogIt "Warning - /tmp/mondo-restore.cfg not found"
619fi
620
621#if [ -e "/tmp/2880.siz" ] ; then
622#    HandleCDROMorFloppies
623#el
624if [ "`cat /tmp/mondo-restore.cfg | grep "tape"`" ] || [ "`cat /tmp/mondo-restore.cfg | grep udev`" ] ; then
625    HandleTape
626else
627    if [ "`cat /proc/cmdline | grep -i pxe`" ] ; then
628        LogIt "PXE boot found"
629        imgname="mondorescue"
630        if [ "`cat /proc/cmdline | grep -i prefix`" ] ; then
631            for i in "`cat /proc/cmdline`" do
632                if [ "`echo $i | grep -i prefix`" ] ; then
633                    imgname=`echo $i | cut -d'=' -f2`
634                fi
635            done
636        fi
637        LogIt "Mounting NFS image $imgname.iso on /mnt/cdrom in loopback"
638        losetup /dev/loop7 /tmp/isodir/$imgname.iso
639        mount -t iso9660 /dev/loop7 /mnt/cdrom
640        # Simulate a local CD
641        echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
642    else
643            HandleCDROMorFloppies
644    fi
645fi
646res=$?
647echo "Please wait."
648insert-all-my-modules > /dev/null &
649sleep 7
650install-additional-tools
651SwapTheMountExecs
652ConfigureLoggingDaemons
653echo "Please wait."
654insert-all-my-modules &
655sleep 7
656if [ -e "/tmp/USE-DEVFS" ] ; then
657    umount /mnt/cdrom 2> /dev/null
658    mv /dev/cdrom /cdrom.lnk 2> /dev/null
659    CD_MOUNTED_OK=""
660    RunDevfsd
661fi
662PauseForRaids
663StartRaids
664StartLvms
665CopyBootDevEntry
666LoadKeymap
667mkdir -p /tmp/tmpfs
668sleep 2
669#clear
670if [ -e "/dev/md0" ] && [ ! -e "/dev/md/0" ] && [ "`cat /tmp/mountlist.txt | grep /dev/md/`" != "" ] ; then
671    LogIt "Creating /dev/md/* softlinks just in case." 1
672    mkdir -p /dev/md
673    cp -af /dev/md0 /dev/md/0 2> /dev/null
674    cp -af /dev/md1 /dev/md/1 2> /dev/null
675    cp -af /dev/md2 /dev/md/2 2> /dev/null
676fi
677# As described in the README.ia64 we replaced on the native system
678# /sbin/fdisk by parted2fdisk.pl now we need the reverse for mindi's
679# boot environment
680export ARCH=`/bin/arch`
681if [ "$ARCH" = "ia64" ] ; then
682    rm -f /sbin/fdisk
683    ln /sbin/parted2fdisk /sbin/fdisk
684fi
685WelcomeMessage
686# SpaceTests; # Mandrake Linux 8.1 doesn't like this
687[ -e "/tmp/mountlist.txt" ] && cp -f /tmp/mountlist.txt /tmp/mountlist.original
688
689if ! [ "`cat /proc/cmdline | grep -i "pxe"`" ] ; then
690    res="`cat /mnt/cdrom/archives/THIS-CD-NUMBER 2> /dev/null`"
691    [ "$res" != "1" ] && [ "$res" != "" ] && Die "This is CD #$res in the series. Please insert CD #1."
692    [ -e "/cdrom.lnk" ] && mv -f /cdrom.lnk /dev/cdrom && mount /dev/cdrom /mnt/cdrom && CD_MOUNTED_OK=yes
693    [ "$CD_MOUNTED_OK" != "yes" ] && TryAgainToFindCD
694    #mount | grep cdrom > /dev/null 2> /dev/null || mount /dev/cdrom /mnt/cdrom >> $LOGFILE 2>> $LOGFILE
695fi
696hack-cfg-if-necessary || LogIt "Cannot find hack-cfg-if-necessary"
697openvt 8 /usr/bin/tail -f /tmp/mondo-restore.log
698
699#-------------------------------
700#ABSORBENTANDYELLOWANDPOROUSISHE#;# --- don't touch this either :)
701#-------------------------------
702
703lsmod > /tmp/ramdisk-lsmod.txt 2> /dev/null
704cat /tmp/original-lsmod.txt /tmp/original-lsmod.txt /tmp/ramdisk-lsmod.txt | cut -d' ' -f1 | sort | uniq -d > /tmp/missing-modules.txt
705echo "Warning - these modules did not make it onto the ramdisk" >> $LOGFILE
706cat /tmp/missing-modules.txt >> $LOGFILE
707
708#ctrlaltdel soft
709for path in /usr.bin /usr/bin ; do
710    fname=$path/nano
711    [ -e "$fname" ] && ln -sf $fname /usr/bin/pico
712done
713res=`which nano 2> /dev/null`
714[ "$res" ] && ln -sf /usr/bin/
715for i in null stdout stdin stderr ; do
716    cp -af /dev/$i /tmp
717done
718if grep "backup-media-type" /tmp/mondo-restore.cfg > /dev/null 2> /dev/null ; then
719    LogIt "backup-media-type is specified in config file - great."
720    LogIt "Calling post-init $mountlist"
721    post-init
722else
723    LogIt "backup-media-type is not specified in config file."
724    LogIt "I think this CD/floppy has no archives on it."
725fi
726echo -en "Type 'exit' to reboot the PC\r"
727umount /mnt/cdrom 2> /dev/null
728mount / -o rw,remount > /dev/null 2> /dev/null
729sh
730CaughtSoftReset
731# reboot
Note: See TracBrowser for help on using the repository browser.