source: branches/stable/mindi-busybox/testsuite/sed.tests

Last change on this file was 1770, checked in by Bruno Cornec, 13 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

  • Property svn:executable set to *
File size: 7.4 KB
Line 
1#!/bin/sh
2
3# SUSv3 compliant sed tests.
4# Copyright 2005 by Rob Landley <rob@landley.net>
5# Licensed under GPL v2, see file LICENSE for details.
6
7. testing.sh
8
9# testing "description" "arguments" "result" "infile" "stdin"
10
11# Corner cases
12testing "sed no files (stdin)" 'sed ""' "hello\n" "" "hello\n"
13testing "sed explicit stdin" 'sed "" -' "hello\n" "" "hello\n"
14testing "sed handles empty lines" "sed -e 's/\$/@/'" "@\n" "" "\n"
15testing "sed stdin twice" 'sed "" - -' "hello" "" "hello"
16
17# Trailing EOF.
18#   Match $, at end of each file or all files?
19
20# -e corner cases
21#   without -e
22#   multiple -e
23#       interact with a
24#   -eee arg1 arg2 arg3
25# -f corner cases
26#   -e -f -e
27# -n corner cases
28#   no newline at EOF?
29# -r corner cases
30#   Just make sure it works.
31# -i corner cases:
32#   sed -i -
33#   permissions
34#   -i on a symlink
35#   on a directory
36#       With $ last-line test
37# Continue with \
38#       End of script with trailing \
39
40# command list
41testing "sed accepts blanks before command" "sed -e '1 d'" "" "" ""
42testing "sed accepts newlines in -e" "sed -e 'i\
431
44a\
453'" "1\n2\n3\n" "" "2\n"
46testing "sed accepts multiple -e" "sed -e 'i\' -e '1' -e 'a\' -e '3'" \
47    "1\n2\n3\n" "" "2\n"
48
49# substitutions
50testing "sed -n" "sed -n -e s/foo/bar/ -e s/bar/baz/" "" "" "foo\n"
51testing "sed s//p" "sed -e s/foo/bar/p -e s/bar/baz/p" "bar\nbaz\nbaz\n" \
52    "" "foo\n"
53testing "sed -n s//p" "sed -ne s/abc/def/p" "def\n" "" "abc\n"
54testing "sed s//g (exhaustive)" "sed -e 's/[[:space:]]*/,/g'" ",1,2,3,4,5,\n" \
55    "" "12345\n"
56testing "sed s arbitrary delimiter" "sed -e 's woo boing '" "boing\n" "" "woo\n"
57testing "sed s chains" "sed -e s/foo/bar/ -e s/bar/baz/" "baz\n" "" "foo\n"
58testing "sed s chains2" "sed -e s/foo/bar/ -e s/baz/nee/" "bar\n" "" "foo\n"
59testing "sed s [delimiter]" "sed -e 's@[@]@@'" "onetwo" "" "one@two"
60
61# branch
62testing "sed b (branch)" "sed -e 'b one;p;: one'" "foo\n" "" "foo\n"
63testing "sed b (branch with no label jumps to end)" "sed -e 'b;p'" \
64    "foo\n" "" "foo\n"
65
66# test and branch
67testing "sed t (test/branch)" "sed -e 's/a/1/;t one;p;: one;p'" \
68    "1\n1\nb\nb\nb\nc\nc\nc\n" "" "a\nb\nc\n"
69testing "sed t (test/branch clears test bit)" "sed -e 's/a/b/;:loop;t loop'" \
70    "b\nb\nc\n" "" "a\nb\nc\n"
71testing "sed T (!test/branch)" "sed -e 's/a/1/;T notone;p;: notone;p'" \
72    "1\n1\n1\nb\nb\nc\nc\n" "" "a\nb\nc\n"
73
74# Normal sed end-of-script doesn't print "c" because n flushed the pattern
75# space.  If n hits EOF, pattern space is empty when script ends.
76# Query: how does this interact with no newline at EOF?
77testing "sed n (flushes pattern space, terminates early)" "sed -e 'n;p'" \
78    "a\nb\nb\nc\n" "" "a\nb\nc\n"
79# N does _not_ flush pattern space, therefore c is still in there @ script end.
80testing "sed N (doesn't flush pattern space when terminating)" "sed -e 'N;p'" \
81    "a\nb\na\nb\nc\n" "" "a\nb\nc\n"
82testing "sed address match newline" 'sed "/b/N;/b\\nc/i woo"' \
83    "a\nwoo\nb\nc\nd\n" "" "a\nb\nc\nd\n"
84
85# Multiple lines in pattern space
86testing "sed N (stops at end of input) and P (prints to first newline only)" \
87    "sed -n 'N;P;p'" "a\na\nb\n" "" "a\nb\nc\n"
88
89# Hold space
90testing "sed G (append hold space to pattern space)" 'sed G' "a\n\nb\n\nc\n\n" \
91    "" "a\nb\nc\n"
92#testing "sed g/G (swap/append hold and patter space)"
93#testing "sed g (swap hold/pattern space)"
94
95testing "sed d ends script iteration" \
96    "sed -e '/ook/d;s/ook/ping/p;i woot'" "" "" "ook\n"
97testing "sed d ends script iteration (2)" \
98    "sed -e '/ook/d;a\' -e 'bang'" "woot\nbang\n" "" "ook\nwoot\n"
99
100# Multiple files, with varying newlines and NUL bytes
101testing "sed embedded NUL" "sed -e 's/woo/bang/'" "\0bang\0woo\0" "" \
102    "\0woo\0woo\0"
103testing "sed embedded NUL g" "sed -e 's/woo/bang/g'" "bang\0bang\0" "" \
104    "woo\0woo\0"
105echo -e "/woo/a he\0llo" > sed.commands
106testing "sed NUL in command" "sed -f sed.commands" "woo\nhe\0llo\n" "" "woo"
107rm sed.commands
108
109# sed has funky behavior with newlines at the end of file.  Test lots of
110# corner cases with the optional newline appending behavior.
111
112testing "sed normal newlines" "sed -e 's/woo/bang/' input -" "bang\nbang\n" \
113    "woo\n" "woo\n"
114testing "sed leave off trailing newline" "sed -e 's/woo/bang/' input -" \
115    "bang\nbang" "woo\n" "woo"
116testing "sed autoinsert newline" "sed -e 's/woo/bang/' input -" "bang\nbang" \
117    "woo" "woo"
118testing "sed empty file plus cat" "sed -e 's/nohit//' input -" "one\ntwo" \
119    "" "one\ntwo"
120testing "sed cat plus empty file" "sed -e 's/nohit//' input -" "one\ntwo" \
121    "one\ntwo" ""
122testing "sed append autoinserts newline" "sed -e '/woot/a woo' -" \
123    "woot\nwoo\n" "" "woot"
124testing "sed insert doesn't autoinsert newline" "sed -e '/woot/i woo' -" \
125    "woo\nwoot" "" "woot"
126testing "sed print autoinsert newlines" "sed -e 'p' -" "one\none" "" "one"
127testing "sed print autoinsert newlines two files" "sed -e 'p' input -" \
128    "one\none\ntwo\ntwo" "one" "two"
129testing "sed noprint, no match, no newline" "sed -ne 's/woo/bang/' input" \
130    "" "no\n" ""
131testing "sed selective matches with one nl" "sed -ne 's/woo/bang/p' input -" \
132    "a bang\nc bang\n" "a woo\nb no" "c woo\nd no"
133testing "sed selective matches insert newline" \
134    "sed -ne 's/woo/bang/p' input -" "a bang\nb bang\nd bang" \
135    "a woo\nb woo" "c no\nd woo"
136testing "sed selective matches noinsert newline" \
137    "sed -ne 's/woo/bang/p' input -" "a bang\nb bang" "a woo\nb woo" \
138    "c no\nd no"
139testing "sed clusternewline" \
140    "sed -e '/one/a 111' -e '/two/i 222' -e p input -" \
141    "one\none\n111\n222\ntwo\ntwo" "one" "two"
142testing "sed subst+write" \
143    "sed -e 's/i/z/' -e 'woutputw' input -; echo -n X; cat outputw" \
144    "thzngy\nagaznXthzngy\nagazn" "thingy" "again"
145rm outputw
146testing "sed trailing NUL" \
147    "sed 's/i/z/' input -" \
148    "a\0b\0\nc" "a\0b\0" "c"
149testing "sed escaped newline in command" \
150    "sed 's/a/z\\
151z/' input" \
152    "z\nz" "a" ""
153
154# Test end-of-file matching behavior
155
156testing "sed match EOF" "sed -e '"'$p'"'" "hello\nthere\nthere" "" \
157    "hello\nthere"
158testing "sed match EOF two files" "sed -e '"'$p'"' input -" \
159    "one\ntwo\nthree\nfour\nfour" "one\ntwo" "three\nfour"
160# sed match EOF inline: gnu sed 4.1.5 outputs this:
161#00000000  6f 6e 65 0a 6f 6f 6b 0a  6f 6f 6b 0a 74 77 6f 0a  |one.ook.ook.two.|
162#00000010  0a 74 68 72 65 65 0a 6f  6f 6b 0a 6f 6f 6b 0a 66  |.three.ook.ook.f|
163#00000020  6f 75 72                                          |our|
164# which looks buggy to me.
165echo -ne "three\nfour" > input2
166testing "sed match EOF inline" \
167    "sed -e '"'$i ook'"' -i input input2 && cat input input2" \
168    "one\nook\ntwothree\nook\nfour" "one\ntwo" ""
169rm input2
170
171# Test lie-to-autoconf
172
173testing "sed lie-to-autoconf" "sed --version | grep -o 'GNU sed version '" \
174    "GNU sed version \n" "" ""
175
176# Jump to nonexistent label
177testing "sed nonexistent label" "sed -e 'b walrus' 2> /dev/null || echo yes" \
178    "yes\n" "" ""
179
180testing "sed backref from empty s uses range regex" \
181    "sed -e '/woot/s//eep \0 eep/'" "eep woot eep" "" "woot"
182
183testing "sed backref from empty s uses range regex with newline" \
184    "sed -e '/woot/s//eep \0 eep/'" "eep woot eep\n" "" "woot\n"
185
186# -i with no filename
187
188touch ./-  # Detect gnu failure mode here.
189testing "sed -i with no arg [GNUFAIL]" "sed -e '' -i 2> /dev/null || echo yes" \
190    "yes\n" "" ""
191rm ./-     # Clean up
192
193testing "sed s/xxx/[/" "sed -e 's/xxx/[/'" "[\n" "" "xxx\n"
194
195# Ponder this a bit more, why "woo not found" from gnu version?
196#testing "sed doesn't substitute in deleted line" \
197#   "sed -e '/ook/d;s/ook//;t woo;a bang;'" "bang" "" "ook\n"
198
199# This makes both seds very unhappy.  Why?
200#testing "sed -g (exhaustive)" "sed -e 's/[[:space:]]*/,/g'" ",1,2,3,4,5," \
201#   "" "12345"
202
203exit $FAILCOUNT
Note: See TracBrowser for help on using the repository browser.