source: branches/stable/mindi-busybox/include/unarchive.h

Last change on this file was 1770, checked in by Bruno Cornec, 13 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File size: 4.6 KB
1/* vi: set sw=4 ts=4: */
2#ifndef __UNARCHIVE_H__
3#define __UNARCHIVE_H__
5#define ARCHIVE_PRESERVE_DATE           1
8#define ARCHIVE_EXTRACT_QUIET           8
9#define ARCHIVE_EXTRACT_NEWER           16
10#define ARCHIVE_NOPRESERVE_OWN          32
11#define ARCHIVE_NOPRESERVE_PERM         64
13typedef struct file_header_t {
14    char *name;
15    char *link_target;
16    off_t size;
17    uid_t uid;
18    gid_t gid;
19    mode_t mode;
20    time_t mtime;
21    dev_t device;
22} file_header_t;
24typedef struct archive_handle_t {
25    /* define if the header and data component should be processed */
26    char (*filter)(struct archive_handle_t *);
27    llist_t *accept;
28    /* List of files that have been rejected */
29    llist_t *reject;
30    /* List of files that have successfully been worked on */
31    llist_t *passed;
33    /* Contains the processed header entry */
34    file_header_t *file_header;
36    /* process the header component, e.g. tar -t */
37    void (*action_header)(const file_header_t *);
39    /* process the data component, e.g. extract to filesystem */
40    void (*action_data)(struct archive_handle_t *);
42    /* How to process any sub archive, e.g. get_header_tar_gz */
43    char (*action_data_subarchive)(struct archive_handle_t *);
45    /* Contains the handle to a sub archive */
46    struct archive_handle_t *sub_archive;
48    /* The raw stream as read from disk or stdin */
49    int src_fd;
51    /* Count the number of bytes processed */
52    off_t offset;
54    /* Function that skips data: read_by_char or read_by_skip */
55    void (*seek)(const struct archive_handle_t *archive_handle, const unsigned amount);
57    /* Temporary storage */
58    char *buffer;
60    /* Flags and misc. stuff */
61    unsigned char flags;
63} archive_handle_t;
66extern archive_handle_t *init_handle(void);
68extern char filter_accept_all(archive_handle_t *archive_handle);
69extern char filter_accept_list(archive_handle_t *archive_handle);
70extern char filter_accept_list_reassign(archive_handle_t *archive_handle);
71extern char filter_accept_reject_list(archive_handle_t *archive_handle);
73extern void unpack_ar_archive(archive_handle_t *ar_archive);
75extern void data_skip(archive_handle_t *archive_handle);
76extern void data_extract_all(archive_handle_t *archive_handle);
77extern void data_extract_to_stdout(archive_handle_t *archive_handle);
78extern void data_extract_to_buffer(archive_handle_t *archive_handle);
80extern void header_skip(const file_header_t *file_header);
81extern void header_list(const file_header_t *file_header);
82extern void header_verbose_list(const file_header_t *file_header);
84extern void check_header_gzip_or_die(int src_fd);
86extern char get_header_ar(archive_handle_t *archive_handle);
87extern char get_header_cpio(archive_handle_t *archive_handle);
88extern char get_header_tar(archive_handle_t *archive_handle);
89extern char get_header_tar_bz2(archive_handle_t *archive_handle);
90extern char get_header_tar_lzma(archive_handle_t *archive_handle);
91extern char get_header_tar_gz(archive_handle_t *archive_handle);
93extern void seek_by_jump(const archive_handle_t *archive_handle, const unsigned amount);
94extern void seek_by_read(const archive_handle_t *archive_handle, const unsigned amount);
96extern ssize_t archive_xread_all_eof(archive_handle_t *archive_handle, unsigned char *buf, size_t count);
98extern void data_align(archive_handle_t *archive_handle, const unsigned short boundary);
99extern const llist_t *find_list_entry(const llist_t *list, const char *filename);
100extern const llist_t *find_list_entry2(const llist_t *list, const char *filename);
102/* A bit of bunzip2 internals are exposed for compressed help support: */
103typedef struct bunzip_data bunzip_data;
104int start_bunzip(bunzip_data **bdp, int in_fd, const unsigned char *inbuf, int len);
105int read_bunzip(bunzip_data *bd, char *outbuf, int len);
106void dealloc_bunzip(bunzip_data *bd);
108typedef struct inflate_unzip_result {
109    off_t bytes_out;
110    uint32_t crc;
111} inflate_unzip_result;
113extern USE_DESKTOP(long long) int unpack_bz2_stream(int src_fd, int dst_fd);
114extern USE_DESKTOP(long long) int inflate_unzip(inflate_unzip_result *res, unsigned bufsize, int src_fd, int dst_fd);
115extern USE_DESKTOP(long long) int unpack_gz_stream(int src_fd, int dst_fd);
116extern USE_DESKTOP(long long) int unpack_lzma_stream(int src_fd, int dst_fd);
118#if BB_MMU
119extern int open_transformer(int src_fd,
120    USE_DESKTOP(long long) int (*transformer)(int src_fd, int dst_fd));
121#define open_transformer(src_fd, transformer, transform_prog, ...) open_transformer(src_fd, transformer)
123extern int open_transformer(int src_fd, const char *transform_prog, ...);
124#define open_transformer(src_fd, transformer, transform_prog, ...) open_transformer(src_fd, transform_prog, __VA_ARGS__)
Note: See TracBrowser for help on using the repository browser.