source: branches/stable/mindi-busybox/examples/udhcp/udhcpd.conf @ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 13 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File size: 3.0 KB
Line 
1# Sample udhcpd configuration file (/etc/udhcpd.conf)
2
3# The start and end of the IP lease block
4
5start       192.168.0.20    #default: 192.168.0.20
6end     192.168.0.254   #default: 192.168.0.254
7
8
9# The interface that udhcpd will use
10
11interface   eth0        #default: eth0
12
13
14# The maximim number of leases (includes addressesd reserved
15# by OFFER's, DECLINE's, and ARP conficts
16
17#max_leases 254     #default: 254
18
19
20# If remaining is true (default), udhcpd will store the time
21# remaining for each lease in the udhcpd leases file. This is
22# for embedded systems that cannot keep time between reboots.
23# If you set remaining to no, the absolute time that the lease
24# expires at will be stored in the dhcpd.leases file.
25
26#remaining  yes     #default: yes
27
28
29# The time period at which udhcpd will write out a dhcpd.leases
30# file. If this is 0, udhcpd will never automatically write a
31# lease file. (specified in seconds)
32
33#auto_time  7200        #default: 7200 (2 hours)
34
35
36# The amount of time that an IP will be reserved (leased) for if a
37# DHCP decline message is received (seconds).
38
39#decline_time   3600        #default: 3600 (1 hour)
40
41
42# The amount of time that an IP will be reserved (leased) for if an
43# ARP conflct occurs. (seconds
44
45#conflict_time  3600        #default: 3600 (1 hour)
46
47
48# How long an offered address is reserved (leased) in seconds
49
50#offer_time 60      #default: 60 (1 minute)
51
52# If a lease to be given is below this value, the full lease time is
53# instead used (seconds).
54
55#min_lease  60      #defult: 60
56
57
58# The location of the leases file
59
60#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
61
62# The location of the pid file
63#pidfile    /var/run/udhcpd.pid #default: /var/run/udhcpd.pid
64
65# Everytime udhcpd writes a leases file, the below script will be called.
66# Useful for writing the lease file to flash every few hours.
67
68#notify_file                #default: (no script)
69
70#notify_file    dumpleases  # <--- useful for debugging
71
72# The following are bootp specific options, setable by udhcpd.
73
74#siaddr     192.168.0.22        #default: 0.0.0.0
75
76#sname      zorak           #default: (none)
77
78#boot_file  /var/nfs_root       #default: (none)
79
80# The remainer of options are DHCP options and can be specifed with the
81# keyword 'opt' or 'option'. If an option can take multiple items, such
82# as the dns option, they can be listed on the same line, or multiple
83# lines. The only option with a default is 'lease'.
84
85#Examles
86opt dns 192.168.10.2 192.168.10.10
87option  subnet  255.255.255.0
88opt router  192.168.10.2
89opt wins    192.168.10.10
90option  dns 129.219.13.81   # appened to above DNS servers for a total of 3
91option  domain  local
92option  lease   864000      # 10 days of seconds
93
94
95# Currently supported options, for more info, see options.c
96#opt subnet
97#opt timezone
98#opt router
99#opt timesvr
100#opt namesvr
101#opt dns
102#opt logsvr
103#opt cookiesvr
104#opt lprsvr
105#opt bootsize
106#opt domain
107#opt swapsvr
108#opt rootpath
109#opt ipttl
110#opt mtu
111#opt broadcast
112#opt wins
113#opt lease
114#opt ntpsrv
115#opt tftp
116#opt bootfile
117
118
119# Static leases map
120#static_lease 00:60:08:11:CE:4E 192.168.0.54
121#static_lease 00:60:08:11:CE:3E 192.168.0.44
122
123
Note: See TracBrowser for help on using the repository browser.