source: branches/stable/mindi-busybox/editors/ @ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 13 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File size: 4.4 KB
2# For a description of the syntax of this configuration file,
3# see scripts/kbuild/config-language.txt.
6menu "Editors"
8config AWK
9    bool "awk"
10    default n
11    help
12      Awk is used as a pattern scanning and processing language.  This is
13      the BusyBox implementation of that programming language.
16    bool "Enable math functions (requires libm)"
17    default y
18    depends on AWK
19    help
20      Enable math functions of the Awk programming language.
21      NOTE: This will require libm to be present for linking.
23config CMP
24    bool "cmp"
25    default n
26    help
27      cmp is used to compare two files and returns the result
28      to standard output.
30config DIFF
31    bool "diff"
32    default n
33    help
34      diff compares two files or directories and outputs the
35      differences between them in a form that can be given to
36      the patch command.
39    bool "Enable checks for binary files"
40    default y
41    depends on DIFF
42    help
43      This option enables support for checking for binary files
44      before a comparison is carried out.
47    bool "Enable directory support"
48    default y
49    depends on DIFF
50    help
51      This option enables support for directory and subdirectory
52      comparison.
55    bool "Enable -d option to find smaller sets of changes"
56    default n
57    depends on DIFF
58    help
59      Enabling this option allows the use of -d to make diff
60      try hard to find the smallest possible set of changes.
62config ED
63    bool "ed"
64    default n
65    help
66      The original 1970's Unix text editor, from the days of teletypes.
67      Small, simple, evil.  Part of SUSv3.  If you're not already using
68      this, you don't need it.
70config PATCH
71    bool "patch"
72    default n
73    help
74      Apply a unified diff formatted patch.
76config SED
77    bool "sed"
78    default n
79    help
80      sed is used to perform text transformations on a file
81      or input from a pipeline.
83config VI
84    bool "vi"
85    default n
86    help
87      'vi' is a text editor.  More specifically, it is the One True
88      text editor <grin>.  It does, however, have a rather steep
89      learning curve.  If you are not already comfortable with 'vi'
90      you may wish to use something else.
93    int "Maximum line length in vi"
94    range 256 16384
95    default 1024
96    depends on VI
97    help
98      vi uses on-stack buffers for intermediate line buffers.
99      You may want to decrease this parameter if your target machine
100      benefits from smaller stack usage.
103    bool "Enable \":\" colon commands (no \"ex\" mode)"
104    default y
105    depends on VI
106    help
107      Enable a limited set of colon commands for vi.  This does not
108      provide an "ex" mode.
111    bool "Enable yank/put commands and mark cmds"
112    default y
113    depends on VI
114    help
115      This will enable you to use yank and put, as well as mark in
116      busybox vi.
119    bool "Enable search and replace cmds"
120    default y
121    depends on VI
122    help
123      Select this if you wish to be able to do search and replace in
124      busybox vi.
127    bool "Catch signals"
128    default y
129    depends on VI
130    help
131      Selecting this option will make busybox vi signal aware.  This will
132      make busybox vi support SIGWINCH to deal with Window Changes, catch
133      Ctrl-Z and Ctrl-C and alarms.
136    bool "Remember previous cmd and \".\" cmd"
137    default y
138    depends on VI
139    help
140      Make busybox vi remember the last command and be able to repeat it.
143    bool "Enable -R option and \"view\" mode"
144    default y
145    depends on VI
146    help
147      Enable the read-only command line option, which allows the user to
148      open a file in read-only mode.
151    bool "Enable set-able options, ai ic showmatch"
152    default y
153    depends on VI
154    help
155      Enable the editor to set some (ai, ic, showmatch) options.
157config FEATURE_VI_SET
158    bool "Support for :set"
159    default y
160    depends on VI
161    help
162      Support for ":set".
165    bool "Handle window resize"
166    default y
167    depends on VI
168    help
169      Make busybox vi behave nicely with terminals that get resized.
172    bool "Optimize cursor movement"
173    default y
174    depends on VI
175    help
176      This will make the cursor movement faster, but requires more memory
177      and it makes the applet a tiny bit larger.
180    bool "Allow vi and awk to execute shell commands"
181    default y
182    depends on VI || AWK
183    help
184      Enables vi and awk features which allows user to execute
185      shell commands (using system() C call).
Note: See TracBrowser for help on using the repository browser.