source: branches/3.3/mindi/mindi @ 3702

Last change on this file since 3702 was 3702, checked in by bruno, 12 months ago
  • Fix #838 by skipping subvol fstab lines for the mountlist
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 127.8 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3702 2018-04-11 00:05:18Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=20000       # increase if you run out of ramdisk space - Default 20 MB
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143fi
144
145# Function to log on screen only
146LogScreen() {
147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
152}
153
154# Function to log in log file only
155LogFile() {
156
157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160        rm -f "$2"
161    fi
162}
163
164# Function to log in both screen and logfile
165LogAll() {
166    LogScreen "$1"
167    LogFile "$1" "$2"
168}
169
170# Last function called before exiting
171# Parameter is exit code value
172# Should be declared here as used immediately below potentialy
173MindiExit() {
174    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
175    LogFile "INFO: End date : `date`" 
176    if [ _"$MONDO_SHARE" != _"" ] ; then
177        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178        if [ -f $LOGFILE ]; then
179            cat $LOGFILE >> /var/log/mondoarchive.log
180        else
181            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
182        fi
183        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184    fi
185
186    cd /
187    sync&
188
189    # Clean temporary files only when standalone mindi
190    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191        rm -Rf $MINDI_TMP
192    fi
193    exit $1
194}
195
196Die() {
197    if [ "$1" = "" ] ; then
198        LogAll "FATAL ERROR"
199    else
200        LogAll "FATAL ERROR. $1"
201    fi
202    if [ _"$2" != _"" ]; then
203        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
204    fi
205    rm -f "$2"
206
207    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
208    LogAll "See http://www.mondorescue.org for more information."
209    LogAll "WE CANNOT HELP unless you enclose that file.\n"
210    MindiExit -1
211}
212
213# Now we can create what we need
214MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
215if [ $? -ne 0 ]; then
216    df $TMPDIR
217    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
218fi
219if [ _"$MINDI_TMP" = _"" ]; then
220    Die "MINDI_TMP is empty, aborting"
221fi
222if [ _"$MINDI_TMP" = _"/" ]; then
223    Die "MINDI_TMP is /, aborting"
224fi
225export MINDI_TMP
226
227# ----------------------------------------------------------------------------
228
229
230AbortHere() {
231    Die "Program is terminating in response to signal received from OS/user"
232}
233
234
235Aborted() {
236    trap SIGHUP SIGTERM SIGTRAP SIGINT
237    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
238    Die "User abort."
239}
240
241
242AddFileToCfgIfExists() {
243    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
244}
245
246
247AddKeyboardMappingFile() {
248    local mappath r included_list included_item i res ii sss
249    mappath=$1
250    KBDEPTH=$(($KBDEPTH+1))
251    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
252    if [ -e "$bigdir/$mappath" ] ; then
253        LogFile "INFO: $mappath already added"
254        return
255    elif [ -d "$bigdir/$mappath" ] ; then
256        echo "Cannot add $mappath: it's a directory. Sorry."
257        return
258    fi
259    LogFile "INFO: Added kbd map $mappath"
260    if [ ! -e "$mappath" ] ; then
261        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
262        if [ ! -e "$mappath" ] ; then
263            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
264            return
265        fi
266    fi
267
268    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
269    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
270        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
271    else
272        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
273    fi
274    for included_item in $included_list ; do
275        if [ ! -e "$included_item" ] ; then
276            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
277            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
278            for ii in $sss ; do
279                [ -e "$ii" ] && AddKeyboardMappingFile $ii
280            done
281        else
282            AddKeyboardMappingFile $included_item
283        fi
284    done
285}
286
287
288CopyDependenciesToDirectory() {
289    local outdir incoming counter d found tdir templog
290    outdir=$1
291    templog=$MINDI_TMP/$$.log
292    mkdir -p $outdir
293    incoming=`ReadLine`
294    counter=$3
295    > $templog
296
297    while [ "$incoming" != "" ] ; do
298        if [ "$3" = "1" ]; then
299            counter=$(($counter+1))
300            LogProgress $counter $2
301        fi
302        # Non absolute file names should not arrive till here => skipped
303        if [ `echo "$incoming" | cut -c1` != '/' ]; then
304            LogAll "WARNING: Unable to handle $incoming"
305            incoming=`ReadLine`
306            continue
307        fi
308        # no parent directory of incoming should be a link, copy is not possible in that case
309        d=`dirname "$incoming"`
310        found="false"
311        while [ $d != "/" -a $found = "false" ]; do
312            [ -h "$d" ] && found="true"
313            d=`dirname "$d"`
314        done
315        if [ -d "$incoming" -a ! -h "$incoming" ]; then
316            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
317        elif [ -e "$incoming" ] && [ $found = "false" ]; then
318            if [ ! -h "$incoming" ]; then
319                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
320            else
321                tdir=`dirname "$incoming"`
322                if [ ! -e "$outdir/$tdir" ]; then
323                    mkdir -p "$outdir/$tdir"
324                fi
325                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
326            fi
327            # Only uncompress modules if not using udevd
328            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
329                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
330            fi
331            [ -x "$outdir" ] && StripExecutable $outdir
332        fi
333        incoming=`ReadLine`
334    done
335}
336
337
338CountItemsIn() {
339    local r
340    r=0
341    for q in $1 ; do
342        r=$(($r+1))
343    done
344    echo $r
345}
346
347
348DropOptimizedLibraries() {
349    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
350    filelist=$1
351    outdir=$2
352
353    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
354    if [ "$list_of_optimized_libraries" = "" ] ; then
355        return 0
356    fi
357    echo -en "Dropping i686-optimized libraries if appropriate"
358    for optimized_lib_name in $list_of_optimized_libraries ; do
359        echo -en "."
360        reason=""
361        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
362        echo "$vanilla_lib_name" >> $filelist
363        LogFile "INFO: Adding $vanilla_lib_name to filelist"
364        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
365        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
366
367        # This may return multiple files
368        for resolved in `mr-read-all-link $vanilla_lib_name`; do
369            LogFile "INFO: Adding as deps $resolved to filelist"
370            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
371            if [ "$vanilla_resolved_name" != "$resolved" ]; then
372                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
373                rmdir $outdir$resolved > /dev/null 2> /dev/null
374                ln -sf $vanilla_resolved_name $outdir$resolved
375                LogFile "INFO: Excluding deps $resolved" 
376                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
377                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
378                echo "$vanilla_resolved_name" >> $filelist.tmp
379                mv -f $filelist.tmp $filelist
380            fi
381        done
382    done
383    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
384    mv -f $filelist.tmp $filelist
385    echo -e "$DONE"
386}
387
388
389FindAndAddUserKeyboardMappingFile() {
390    local r res mapfile mappath included_item included_list keyfile mp locale
391    LogAll "INFO: Analyzing your keyboard's configuration."
392    KEYDIR=/usr/lib/kbd
393    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
394    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
395    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
396    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
397    if [ ! -e "$KEYDIR" ] ; then
398        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
399        return 0
400    else
401        LogFile "INFO: KEYDIR=$KEYDIR"
402    fi
403    if [ -e "/etc/sysconfig/keyboard" ] ; then
404        LogFile "INFO: Red Hat-style config detected."
405        keyfile=/etc/sysconfig/keyboard
406    elif [ -e "/etc/vconsole.conf" ] ; then
407        LogFile "INFO: New Fedora style config detected."
408        keyfile=/etc/vconsole.conf
409    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
410        LogFile "INFO: Slackware-style config detected."
411        keyfile=/etc/rc.d/rc.keymap
412    elif [ -e "/etc/rc.config" ] ; then
413        LogFile "INFO: Debian-style config detected."
414        keyfile=/etc/rc.config
415    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
416        LogFile "INFO: Debian-style config detected."
417        mkdir -p $bigdir/tmp
418        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
419        KBDEPTH=0
420        mkdir -p $bigdir/etc/console
421        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
422        echo ""
423        echo -e "$DONE"
424        return 0
425    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
426        LogFile "INFO: Ubuntu-style config detected."
427        mkdir -p $bigdir/tmp
428        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
429            kbdfile="/etc/console-setup/boottime.kmap.gz"
430        else
431            kbdfile="/etc/console-setup/cached.kmap.gz"
432        fi
433        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
434        KBDEPTH=0
435        mkdir -p $bigdir/etc/console-setup
436        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
437        echo ""
438        echo -e "$DONE"
439        return 0
440    elif [ -e "/etc/default/keyboard" ]; then
441        LogFile "INFO: New Debian-style config detected."
442        keyfile=/etc/default/keyboard
443    elif [ -e "/etc/rc.conf" ] ; then
444        LogFile "INFO: ArchLinux config detected."
445        keyfile=/etc/rc.conf
446    elif [ -e "/etc/conf.d/keymaps" ] ; then
447        LogFile "INFO: Gentoo-style config detected."
448        keyfile=/etc/conf.d/keymaps
449    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
450        LogFile "INFO: X11-style config detected."
451        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
452    else
453        LogFile "Searching for rc.config ..."
454        keyfile=`find /etc -name rc.config | head -n1`
455        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
456            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
457            return
458        else
459            LogFile "INFO: Found $keyfile"
460        fi
461    fi
462    if [ ! -e "$KEYDIR/keymaps" ] ; then
463        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
464        return
465    fi
466    LogFile "INFO: keyfile=$keyfile"
467    # For SLES we need to remove the .map.gz extension Cf #614
468    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
469    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
470    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`             # Gentoo, ArchLinux & New fedora
471    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
472    [ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" | grep -v '^#' | cut -d= -f2 | tr -d '"'`            # New Debian 8+
473    LogFile "INFO: locale=$locale"
474    #
475    # Process the keymaps dir once for all
476    # AddKeyboardMappingFile will use it recursively
477    #
478    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
479    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
480    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
481    # For new distro such as RHEL 7 we need that additional search
482    [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
483    # If we have multiple keymaps then log it !!
484    echo "$mp" | grep -q " " >> $LOGFILE
485    if [ $? -eq 0 ]; then
486        LogAll "WARNING: Multiple keymaps found: $mp"
487        LogFile "INFO: The following one will be used"
488    fi
489    for i in $mp ; do
490        mappath=$i
491        [ -e "$i" ] && [ ! -d "$i" ] && break
492    done
493    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
494        mappath=$(find /usr /lib /lib64 -path "*/kbd/keymaps/*/$locale | head -1")
495    fi
496    LogFile "INFO: mappath = $mappath"
497    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
498        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
499        return
500    fi
501    echo -en "INFO: Adding keyboard mapping tables"
502    mkdir -p $bigdir/tmp
503    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
504    KBDEPTH=0
505    AddKeyboardMappingFile $mappath
506    echo -e "$DONE"
507    rm -f $MINDI_TMP/keymaps.find
508    return 0
509}
510
511
512FindLdlinux32Binary() {
513    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
514    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
515    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
517    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
518    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
519    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
520    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
521    if [ ! -e "$LDLINUXC32" ]; then 
522        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
523        LDLINUXC32=/tmp/idoesnthopefullyexist
524    else
525        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
526    fi
527}
528
529
530FindMboot32Binary() {
531    MBOOTC32=/usr/lib/syslinux/mboot.c32
532    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
533    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
536    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
537    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
538    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
539    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
540    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
541}
542
543FindLdlinuxe64Binary() {
544    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
545    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
546    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
548    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
549    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
550    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
551    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
552    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
553}
554
555FindSyslinux64EFI() {
556    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
557    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
558    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
560    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
561    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
562    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
563    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
564    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
565}
566
567FindIsolinuxBinary() {
568    ISOLINUX=/usr/lib/isolinux.bin
569    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
570    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
573    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
574    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
575    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
576    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
577    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
578}
579
580
581GenerateGiantDependencyList() {
582    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
583
584    echo -en "INFO: Analyzing dependency requirements"
585    outfile=$1
586    tempfile=$MINDI_TMP/$$.txt
587    incoming=`ReadLine`
588
589    > $tempfile
590    progress=0
591    res=0
592    noof_lines=$2
593    while [ "$incoming" != "" ] ; do
594        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
595            incoming=`ReadLine`
596            continue
597        fi
598        if [ "$incoming" = "LVMFILES:" ] ; then
599            break
600        fi
601        filelist=`GenerateListForFile "$incoming"`
602        r=$?
603        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
604        res=$(($res+$r))
605#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
606        for fname in $filelist ; do
607            [ "$fname" != "" ] && echo "$fname" >> $tempfile
608        done
609        progress=$(($progress+1))
610        LogProgress $progress $noof_lines
611        incoming=`ReadLine`
612    done
613    if  [ "$incoming" = "LVMFILES:" ] ; then
614        incoming=`ReadLine`
615        lvmversion=""
616        while [ "$incoming" != "" ] ; do
617            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
618                incoming=`ReadLine`
619                continue
620            fi
621            filelist=`GenerateListForFile "$incoming"`
622            for tool in $filelist ; do
623            lvmresolved=`readlink -f $tool`
624            if [ "$tool" = "$lvmresolved" ]; then
625                echo "$tool" >> $tempfile
626            elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
627                if [ "$lvmversion" = "" ] ; then
628                    lvmversion=`$lvmresolved`
629                    echo "$lvmresolved" >> $tempfile
630                fi
631                toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
632                if [ "$lvmversion" = "200" ]; then
633                    # pvdata and lvmcreate_initrd don't exist in LVM2
634                    case "$toolstripped" in
635                    "pvdata")
636                            continue
637                            ;;
638                    "lvmcreate_initrd")
639                            continue
640                            ;;
641                        esac
642                fi
643                toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
644                if [ -e "$toolpath" ] ; then
645                        echo "$toolpath" >> $tempfile
646                        echo "$tool" >> $tempfile
647                else
648                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
649                fi
650                if [ -e "$toolpath" ] ; then
651                    echo "$toolpath" >> $tempfile
652                    echo "$tool" >> $tempfile
653                else
654                    echo "Where are your LVM-Tools? Couldn't find $tool"
655                fi
656                else
657                    echo "$tool" >> $tempfile
658                fi
659            done
660            progress=$(($progress+1))
661            LogProgress $progress $noof_lines
662            incoming=`ReadLine`
663        done
664    fi
665    echo -e "$DONE"
666
667    echo -en "INFO: Making complete dependency list..."
668    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
669    mv -f $tempfile.new $tempfile
670    > $outfile.pre
671    progress=0
672    noof_lines=`cat $tempfile | wc -l`
673    LogFile "---------------------------------"
674    LogFile "List of dependencies:             "
675    LogFile "---------------------------------"
676    for fname in `cat $tempfile` ; do
677        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
678        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
679        progress=$(($progress+1))
680        LogProgress $progress $noof_lines
681    done
682    if [ _"$MONDO_SHARE" != _"" ]; then
683        mkdir -p $bigdir/tmp
684        mkdir -p $bigdir/usr/bin
685        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
686            LogAll "\nINFO: Incorporating post-nuke tarball"
687            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
688        fi
689        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
690            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
691        else
692            LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
693            LogAll "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
694            LogAll "       If Mindi was called by Mondo then send a bug report."
695            LogAll "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
696            LogAll "       Finally, run Mindi again."
697            Die "Odd."
698        fi
699        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
700        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
701            LogAll "\nINFO: Incorporating Network-related settings"
702            for r in NETFS-* ; do
703                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
704                LogFile "INFO: Copying $r to ramdisk"
705            done
706        fi
707    fi
708    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
709    rm -f $tempfile $outfile.pre
710    [ "$res" -eq "0" ] && echo -e "$DONE" || echo "\nFailed."
711    return $res
712}
713
714
715GenerateListForFile() {
716    local files_found fname incoming
717    incoming="$1"
718    files_found=""
719
720    for fname in $incoming ; do
721        files_found="$files_found `LocateFile $fname`"
722    done
723
724    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
725}
726
727
728# Returns all disk devices which are part of a raid array
729GetAllRaidMembers() {
730    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
731}
732
733
734GetFileSizeList() {
735    local i
736    for i in `find $1 -type d -o -print` ; do
737        du -sk $i
738    done
739}
740
741
742# Check kernel filesystem capabilites for accessing initrd image
743# Could be ext2 FS (old mode) or initramfs (new mode)
744#
745# Interface definition:
746# param #1: absolute path to kernel image
747GetInitrdFilesystemToUse() {
748
749    # interface test: make sure we have one parameter
750    if [ $# -ne 1 ]; then
751        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
752    fi
753
754    # interface parameters
755    local lvKernelImage=$1
756
757    # local constants (filesystem magic strings)
758    local lcMagicCramfs="<3>cramfs: wrong magic"
759    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
760    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
761    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
762
763    # local variables
764    local lvOffset
765    local lvScanRes
766    local lvUseFilesystem
767
768    # say where we are.
769    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
770
771    # verify that file exists
772    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
773
774    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
775    file $lvKernelImage 2>&1 | grep -q gzip
776    if [ $? -eq 0 ]; then
777        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
778        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
779    else
780        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
781        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
782        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
783        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
784        if [ $lvOffset -eq 0 ]; then
785            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
786            lvScanRes=$lcMagicInitfs
787        else
788            lvOffset=`expr $lvOffset / 2`
789            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
790            # scan again  kernel image
791            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
792        fi
793    fi
794
795    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
796    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
797        lvUseFilesystem="ext2fs"
798    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
799        lvUseFilesystem="ext3fs"
800    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
801        lvUseFilesystem="initramfs"
802    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
803        lvUseFilesystem="cramfs"
804    else
805        # In that case, we are most probably after 2.6.30 and use the supported initramfs
806        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
807        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
808        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
809        lvUseFilesystem="initramfs"
810    fi
811
812    # say what we are using
813    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
814
815    # return file system to use
816    echo "$lvUseFilesystem"
817
818}
819
820# Searches members of raid device
821# $1: raid device (/dev/md...)
822GetRaidDevMembers() {
823    if [ ! -f /etc/raidtab ]; then 
824        return
825    fi
826    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
827}
828
829
830ListAllPartitions() {
831    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}' | sort -u
832    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
833    if [ -e "/vmfs/volumes" ]; then
834        # For VMWare ESX 3 get the device names of these volumes
835        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
836    fi
837    return
838}
839
840
841ListKernelModulePaths() {
842    local module_list module fname r kern
843    module_list="$MODULES"
844    # Remove unwanted modules from list
845    for i in $DENY_MODS; do
846        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
847    done
848###
849### Sq-Modification ... Use kernelname for module search path if specified
850###
851    if [ "${kernelname}" != "" ]
852    then
853        kern=${kernelname}
854    else
855        kern="$KERVERRUN"
856    fi
857    export KERVER=$kern
858###
859### Sq-Mod End
860###
861    # Get rid of duplicates
862    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
863        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
864        if [ -z "$r" ]; then
865            if [ "`echo "$MODULES" | grep -w $module`" ]; then
866                r="[live module file not found]"
867            else
868                r="[extra module file not found]"
869            fi
870        else
871            [ -f "$r" ] && echo "$r"
872        fi
873        LogFile "INFO: module $module --> $r"
874    done
875    find /lib/modules/$kern/modules.* -type f 2> /dev/null
876}
877
878#
879# Critical function which computes all dependencies (dyn. lib.)
880# for a list of binaries
881#
882LocateDeps() {
883    local incoming fname deps
884    incoming="$*"
885    deps=""
886
887    for fname in $incoming ; do
888        if [ ! -e "$fname" ] ; then
889            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
890            if echo $fname | grep lvm &> /dev/null ; then
891                LogFile "          This warning only affects you if you are using LVM."
892                if echo "$MODULES" | grep lvm &> /dev/null ; then
893                    LogFile "          I think you are, so please take heed!"
894                else
895                    LogFile "          I don't think you are, so don't worry about it."
896                fi
897            fi
898        else
899            deps="$deps $fname" 
900        fi
901    done
902    mr-read-all-link `mr-process-ldd $deps | sort -u` $deps | sort -u
903}
904
905
906LocateFile() {
907    local j dn newdn bn path fname_to_find output
908    fname_to_find="$1"
909    # It's an absolute path
910    j=`echo "$fname_to_find" | cut -c1`
911    if [ _"$j" = _"/" ]; then
912        dn=`dirname $fname_to_find`
913        # We suppose that the link is already included, just add the new file
914        if [ -h "$dn" ]; then
915            newdn=`readlink -f $dn`
916            bn=`basename $fname_to_find`
917            output="$newdn/$bn"
918        else
919            output="$fname_to_find"
920        fi
921        if [ -h "$output" ] ; then
922            output="`mr-read-all-link $output` $output"
923        fi
924        echo "$output"
925        return 0
926    fi
927    # It's not an absolute path
928    output=""
929    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
930    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
931        [ -h "$path" ] && continue
932        [ ! -e "$path/$fname_to_find" ] && continue
933        output="$path/$fname_to_find $output"
934        if [ -h "$path/$fname_to_find" ] ; then
935            output="`mr-read-all-link $path/$fname_to_find` $output"
936        fi
937    done
938    if [ "$output" = "" ] ; then
939        return 1
940    fi
941    echo "$output"
942    return 0
943}
944
945LogProgress() {
946    local i progress modres noof_lines title
947 
948    progress=$1
949    noof_lines=$2
950    title=$3
951
952    i=$(($progress*100))
953    if [ $noof_lines -ne 0 ]; then
954        i=$(($i/$noof_lines))
955    else
956        i=0
957    fi
958
959    if [ _"$MONDO_SHARE" != _"" ]; then 
960        echo "$title        $i%"
961    else
962        echo -en "\r\t\t\t\t\t\t\t\t"
963        echo -en "$i"
964        echo -en "%"
965        modres=$(($progress%4))
966        [ "$modres" -eq "0" ] && echo -en "\t/"
967        [ "$modres" -eq "1" ] && echo -en "\t-"
968        [ "$modres" -eq "2" ] && echo -en "\t\\"
969        [ "$modres" -eq "3" ] && echo -en "\t|"
970    fi
971}
972
973# Called by PrepareTargetDir, to make /tmp/$MRCFG
974MakeMondoConfigFile() {
975    local outfile use_lzo use_comp use_star use_gzip use_lzma
976    outfile=$1
977    > $outfile
978    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
979    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
980    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
981    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
982    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
983    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
984    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
985    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
986    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
987    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
988    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
989    echo "use-lzo $use_lzo" >> $outfile
990    echo "use-gzip $use_gzip" >> $outfile
991    echo "use-star $use_star" >> $outfile
992    echo "use-lzma $use_lzma" >> $outfile
993    echo "use-comp $use_comp" >> $outfile
994    echo "boot-type $BOOT_TYPE" >> $outfile
995    echo "datestamp `date`" >> $outfile
996    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
997    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
998    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1010
1011    # Deal with network configuration in a portable way
1012    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1013        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1014    fi
1015}
1016
1017# Get PV's for an LV
1018GetPVsForLV() {
1019    local vg
1020
1021    if [ -n "$1" ]; then
1022        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1023        if [ -z "$vg" ]; then
1024            return
1025        fi
1026        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1027    fi
1028}
1029
1030
1031MakeMountlist() {
1032    local mountlist all_partitions current_partition \
1033partition_size partition_format outstring partition_number \
1034partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1035absolute_partition old_partition_fmt current_lvolume uname skip
1036
1037    LogFile "------------------------------------"
1038    LogFile "INFO: Your raw fstab file looks like this:"
1039    LogFile "------------------------------------"
1040    cat $MY_FSTAB >> $LOGFILE
1041    LogAll "-----------------------------------"
1042    LogAll "INFO: Your mountlist will look like this:"
1043    LogAll "-----------------------------------"
1044
1045# mountlist(OUT)
1046    mountlist=$1
1047
1048# NB: partition = device
1049# NB: mountpt = where the device is mounted
1050
1051    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1052
1053    [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1054    > $mountlist
1055    all_partitions=""
1056   
1057    if [ $LVM != "false" ]; then
1058        LogFile "INFO: Analyzing LVM..."
1059        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1060        if [ $? -ne 0 ]; then
1061            LVM="false"
1062        fi
1063        # Excluded LVs and GVs are not reported here
1064        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1065    fi
1066    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1067    for i in $IMAGE_DEVS ; do
1068        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1069    done
1070    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1071    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1072    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1073    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1074    for c_p in $all_partitions ; do
1075        # Skip fd/cd devices, network FS, cifs, brtfs subvols
1076        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1077        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1078        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1079            current_partition=`readlink -f $c_p`
1080            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1081                current_partition="$c_p"
1082            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1083                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1084                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1085            fi
1086            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1087        else
1088            current_partition="$c_p"
1089        fi
1090        [ "$c_p" = "none" ] && continue
1091
1092        redhat_label=""
1093        label=""
1094        uuid=""
1095        absolute_partition=`readlink -f $c_p`
1096        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1097
1098        # set default in case we dont't find it
1099        str_to_find_fmt_with=$current_partition
1100
1101        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1102        # current_partition contains only first column of /etc/fstab
1103        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1104            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1105            actual_dev=""
1106
1107            # 1st try, findfs - the RHEL way of finding labels and their partitions
1108            if [ -x "/sbin/findfs" ]; then
1109                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1110            fi
1111   
1112            # 2nd try : blkid, the good way for all LABEL except swap
1113            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1114                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1115                # For LVM FS it will give a /dev/dm-# which should then be converted
1116                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1117                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1118                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1119                    for dev in `ls /dev/mapper/*`; do
1120                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1121                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1122                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1123                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1124                            break
1125                        fi
1126                    done
1127                fi
1128            fi
1129   
1130            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1131            # For LVM gives a /dev/mapper entry
1132            if [ "x$actual_dev" = "x" ]; then
1133                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1134            fi
1135   
1136            # 4th try, with vol_id
1137            # SWAP only
1138            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1139                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1140                for dev_swap in $list_swaps ; do
1141                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1142                    if [ "x$dev_exists" != "x" ]; then
1143                        actual_dev=$dev_swap
1144                        break;
1145                    fi
1146                done
1147            fi
1148
1149            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1150            # LABEL=SW-cciss/c0d0p3 (RDP)
1151            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1152            # SWAP only
1153            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1154                    skip=""
1155                    uname=$KERVERRUN
1156                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1157                    # 2.6.12 needs 16 (FC3)
1158                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1159                    # 2.6.19 and upper needs 1052
1160                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1161                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1162                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1163                    if [ $skip = "" ]; then
1164                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1165                    fi
1166                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1167                    do
1168                        # Location of the swap label for kernel 2.6
1169                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1170                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1171                            actual_dev=$try_dev
1172                        fi
1173                    done
1174            fi
1175
1176            # Check if one of all those tries has known success
1177            if [ "x$actual_dev" != "x" ]; then
1178                current_partition=$actual_dev
1179            else
1180                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1181            fi
1182        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1183        # current_partition contains only first column of /etc/fstab
1184        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1185            uuid=`echo "$current_partition" | cut -d'=' -f2`
1186            actual_dev=""
1187
1188            # 1st try, findfs - the RHEL way of finding labels and their partitions
1189            if [ -x "/sbin/findfs" ]; then
1190                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1191            fi
1192   
1193            # 2nd try : blkid, the good way for all UUID except swap
1194            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1195                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1196                # For LVM FS it will give a /dev/dm-# which should then be converted
1197                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1198                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1199                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1200                    for dev in `ls /dev/mapper/*`; do
1201                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1202                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1203                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1204                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1205                            break
1206                        fi
1207                    done
1208                fi
1209            fi
1210   
1211            # 3th try, with vol_id
1212            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1213                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1214                for dev in $list_dev ; do
1215                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1216                    if [ "x$dev_exists" != "x" ]; then
1217                        actual_dev=$dev
1218                        break;
1219                    fi
1220                done
1221            fi
1222
1223            # 4th try, with dumpuuid (VMWare only ?) for swap
1224            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1225                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1226                for dev in $list_dev ; do
1227                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1228                    if [ "x$dev_exists" != "x" ]; then
1229                        actual_dev=$dev
1230                        break;
1231                    fi
1232                done
1233            fi
1234
1235            # Check if one of all those tries has known success
1236            if [ "x$actual_dev" != "x" ]; then
1237                current_partition=$actual_dev
1238            else
1239                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1240            fi
1241        else
1242            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1243            # they use symlinks in fstab unrelated to what is shown in mount !
1244            if [ _"$partition_mountpt" = _"" ]; then
1245                # set default in case we dont't find it
1246                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1247                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1248                            str_to_find_fmt_with=$tmpp
1249                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1250                            break;
1251                        fi
1252                done
1253            fi
1254        fi
1255
1256        # Avoid analyzing btrfs subvol partitions
1257        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | grep -v 'subvol=' | head -n1`
1258        # Detects noauto partitions not mounted and exclude them
1259        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1260            LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1261            continue
1262        fi
1263        # Detects bind partitions and exclude them
1264        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1265            LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1266            continue
1267        fi
1268
1269        # Look for devices which have to be excluded
1270        skip=0
1271        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1272            l=""
1273            list_of_devices="`mr-read-all-link $current_partition`"
1274            for d in $list_of_devices; do
1275                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1276            done
1277
1278            # Remove PVs from LVs excluded
1279            l="$l `GetPVsForLV $current_partition`"
1280
1281            # We want a single unique list
1282            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1283
1284            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1285                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1286                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1287                    skip=1
1288                    continue
1289                fi
1290            done
1291        fi
1292        if [ $skip -eq 1 ]; then
1293            continue
1294        fi
1295
1296        # sort in case of btrfs subvol
1297        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB | sort -u`
1298        # Detects iso9660 ISO images and exclude them
1299        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1300                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1301            continue
1302        fi
1303        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1304        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1305        # the former is then a link to the latter, so we test whether
1306        # $current_partition is actually such a link or not and set
1307        # $current_lvolume accordingly. On Debian you may find more than one answer
1308        # so we remove the one corresponding to /dev/.static
1309        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1310        # principle is the same and we need to find the link to it as well.
1311        # Note that $current_lvolume may well be an
1312        # ordinary device. It is just to make sure that we feed the right value
1313        # into any of the LVM tools if possible.
1314
1315        current_lvolume="$current_partition"
1316        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1317            # .static dir are a Debian specificity
1318            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1319            echo $current_lvolume | grep -q ' '
1320            if [ $? -eq 0 ]; then
1321                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1322            fi
1323            # if it's not found, it may well be a real device such as a multipath one
1324            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1325            if [ _"$current_lvolume" = _"" ]; then
1326                current_lvolume="$current_partition"
1327            fi
1328        fi
1329        #
1330        # End of LVM device style variation code (other than $current_lvolume).
1331
1332        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1333            # Size computed via LVM not directly
1334            partition_size="lvm"
1335        else
1336            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1337            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1338            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1339                # Skip swap files
1340                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1341                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1342                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1343                [ "$partition_format" != "swap" ] && partition_format="swap"
1344                if [ "$partition_size" = "" ] ; then
1345                    totalsize=0
1346                    items=0
1347                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1348                        totalsize=$(($totalsize+$i))
1349                        items=$(($items+1))
1350                    done
1351                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1352                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1353                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1354                fi
1355            else
1356                partition_size=`SizeOfPartition $current_partition`
1357            fi
1358        fi
1359        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1360        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1361        if [ "$partition_mountpt" = "" ] ; then
1362            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1363                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1364                    partition_mountpt="raid"
1365                    partition_format="raid"
1366                else
1367                    partition_mountpt="lvm"
1368                    partition_format="lvm"
1369                fi
1370            fi
1371        fi
1372        psz=$partition_size
1373        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1374        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1375        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1376            partition_mountpt="image"
1377            old_partition_fmt=$partition_format
1378            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1379            partition_size=$(($partition_size+1)); # just in case
1380            if [ "$partition_format" = "Linux" ] ; then
1381                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1382                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1383                partition_format=$old_partition_fmt
1384            fi
1385        fi
1386
1387        if [ ! "$partition_mountpt" ] ; then
1388            LogFile "------- $FDISK -l $qq log ------------"
1389            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1390                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1391                [ "$partition_format" ] && break
1392            done
1393            LogFile "------- $FDISK log end ------------"
1394            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1395                partition_format="compaq"
1396            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1397                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1398                continue
1399            fi
1400        fi
1401        if [ "$redhat_label" ]; then
1402            label="$redhat_label"
1403        elif [ "$uuid" ]; then
1404            label="$uuid"
1405        fi
1406
1407        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1408        # in order to mount the root part e.g. in grub.
1409        # One way to solve this is to add the UUID now, if there wasn't one so it's
1410        # restored correctly
1411        if [ _"$label" = _"" ]; then
1412            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1413        fi
1414
1415        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1416        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1417        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1418        if [ "$current_partition" = "" ] ; then
1419            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1420        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1421            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1422                partition_mountpt=raid
1423                partition_format=raid
1424                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1425                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1426            else
1427                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1428            fi
1429        elif [ "$partition_format" = "" ] ; then
1430            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1431        elif [ "$partition_size" = "" ] ; then
1432            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1433        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1434            continue
1435        else
1436            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1437            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1438                partition_format="vfat"
1439            fi
1440            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1441            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1442        fi
1443    done
1444    LogAll "-----------------------------------" 
1445}
1446
1447CheckMountlist() {
1448    local file=$1
1449    # Coherency verification
1450    ML01=`cat $file | wc -l`
1451    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1452    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1453    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1454    if [ "$ML01" -ne "$ML1" ]; then
1455        LogFile "--------------------------------------------"
1456        LogAll "WARNING: Duplicate device entry in mountlist"
1457        LogFile "--------------------------------------------"
1458    fi
1459    if [ "$ML02" -ne "$ML2" ]; then
1460        LogFile "--------------------------------------------"
1461        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1462        LogFile "------------------------------------------------"
1463    fi
1464}
1465
1466
1467MakeISOErrors() {
1468
1469LogFile "----------- $ISO_CMD's errors --------------"
1470LogAll "Command invoked: $CMD ."
1471LogAll "$ISO_CMD returned the following errors:"
1472cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1473LogAll "ERROR: Failed to create ISO image."
1474}
1475
1476MakeISO() {
1477
1478LogAll "INFO: Generating ISO image."
1479LOCISO=`echo $CMD | perl -p -e 's|.* -o (.+)/mindi.iso .*|$1|'`
1480(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1481if [ $? -ne 0 ] ; then
1482    # In case of UEFI handle differences in option handling
1483    if [ "$BOOT_TYPE" = "UEFI" ]; then
1484        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1485        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1486        if [ $? -ne 0 ] ; then
1487            # xorriso e.g.
1488            CMD=`echo $CMD | perl -p -e 's|-eltorito-platform 0xEF ||'`
1489            (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1490            if [ $? -eq 0 ] ; then
1491                LogAll "INFO: Invoking $CMD ."
1492                LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1493            else
1494                MakeISOErrors
1495            fi
1496        else
1497            LogAll "INFO: Invoking $CMD ."
1498            LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1499        fi
1500    else
1501        MakeISOErrors
1502    fi
1503else
1504    LogAll "INFO: Invoking $CMD ."
1505    LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
1506fi
1507rm -f $MINDI_TMP/mkisofs.log
1508}
1509
1510MakeBootableDevice() {
1511
1512local target tbc retval part size mount_opt
1513
1514target="$1"
1515
1516rm -Rf $MINDI_TMP/target
1517mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1518
1519LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1520cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1521for i in memdisk memtest.bin memtest.img ; do
1522    j=$MINDI_LIB/$i
1523    k=$MINDI_TMP/target
1524    if [ -e "$j" ] ; then
1525        LogAll "INFO: Copying $j to $k"
1526        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1527        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1528        if [ _"$MONDO_SHARE" != _"" ]; then 
1529            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1530        fi
1531    fi
1532done
1533
1534retval=0
1535LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1536cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1537if [ $? -ne 0 ] ; then
1538    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1539    retval=$(($retval+1))
1540fi
1541LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1542cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1543if [ $? -ne 0 ] ; then
1544    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1545    retval=$(($retval+1))
1546fi
1547
1548# copy boot stuff now generated in PrepareBigDir
1549if [ "$BOOT_TYPE" = "UEFI" ]; then
1550    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1551    tbc="EFI"
1552    # Also prepare a BIOS compatible boot
1553    if  [ "$target" = "ISO" ]; then
1554        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1555    fi
1556else
1557    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1558    tbc="syslinux"
1559    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1560        LogFile "----------- syslinux's conf --------------"
1561        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1562        LogFile "------------------------------------------"
1563    fi
1564    if  [ "$target" = "ISO" ]; then
1565        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1566        if [ $? -ne 0 ] ; then
1567            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1568            retval=$(($retval+1))
1569        fi
1570    fi
1571fi
1572
1573if [ "$ARCH" != "ia64" ] ; then
1574    if [ $KERNEL_IS_XEN = "yes" ]; then
1575        FindMboot32Binary
1576        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1577        if [ $? -ne 0 ] ; then
1578            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1579            retval=$(($retval+1))
1580        fi
1581        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1582        if [ $? -ne 0 ] ; then
1583            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1584            retval=$(($retval+1))
1585        fi
1586    fi
1587fi
1588
1589MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1590
1591if [ _"$MONDO_SHARE" != _"" ]; then 
1592    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1593    if [ $? -ne 0 ] ; then
1594        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1595        LogAll "       Please check the target directory."
1596        retval=$(($retval+1))
1597    fi
1598    if [ $KERNEL_IS_XEN = "yes" ]; then
1599        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1600        if [ $? -ne 0 ] ; then
1601            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1602            LogAll "       Please check the target directory."
1603            retval=$(($retval+1))
1604        fi
1605    fi
1606    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1607    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1608    if [ $? -ne 0 ] ; then
1609        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1610        LogAll "       Please check the target directory."
1611        retval=$(($retval+1))
1612    fi
1613    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1614    if [ $? -ne 0 ] ; then
1615        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1616        LogAll "       Please check the target directory."
1617        retval=$(($retval+1))
1618    fi
1619fi
1620
1621if [ -f "$MINDI_TMP/$MRCFG" ]; then
1622    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1623fi
1624
1625LogFile "----------- target dir content -----------"
1626LogFile "------------------------------------------"
1627ls -lR $MINDI_TMP/target >> $LOGFILE
1628LogFile "------------------------------------------"
1629LogFile "----------- target dir sizes -------------"
1630du -sk $MINDI_TMP/target/* >> $LOGFILE
1631LogFile "------------------------------------------"
1632LogFile "Kernel size = `du -sk $kernelpath | cut -f1` K"
1633LogFile "--------------------------------"
1634
1635if [ "$retval" -ne "0" ] ; then
1636    sync
1637    umount $MINDI_TMP/target
1638    LogAll "ERROR: Problems while creating boot media."
1639    LogAll "       Please unload some of your modules and try again."
1640    Die    "       Try using another temporary directory instead of $MINDI_TMP"
1641fi
1642
1643mkdir -p $MINDI_TMP/mpt
1644
1645if  [ "$target" = "USB" ]; then
1646    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1647    LogAll "INFO: Checking $USBDEVICE"
1648    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1649    if [ $? -ne 0 ]; then
1650        LogAll "ERROR: Unable to access $USBDEVICE"
1651        LogAll "       Make sure your USB device is plugged in"
1652        MindiExit -1
1653    fi
1654    # Some distro do auto mount at that point (Ubuntu)
1655    LogAll "INFO: Unmounting $USBPART just in case"
1656    sync
1657    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1658    if [ "$BOOT_TYPE" = "BIOS" ]; then
1659        # If your key has no MBR it may cause an issue
1660        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1661        if [ -r $MBRFILE ]; then
1662            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1663            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1664        else
1665            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1666            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1667        fi
1668    fi
1669    LogAll "INFO: Preparing $USBDEVICE"
1670    cat > $MINDI_TMP/fdisk.txt << EOF
1671d
1672d
1673d
1674d
1675n
1676p
16771
1678
1679
1680t
1681b
1682a
16831
1684w
1685EOF
1686    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1687    if [ $? -ne 0 ]; then
1688        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1689        LogAll "       Make sure your USB device is plugged in"
1690        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1691        MindiExit -1
1692    fi
1693    LogFile "fdisk build file"
1694    LogFile "----------------"
1695    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1696    LogFile "----------------"
1697    rm -f $MINDI_TMP/fdisk.txt
1698    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1699    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1700    # Calling kpartx in case devices were not created
1701    if [ -x "/sbin/kpartx" ]; then
1702        /sbin/kpartx -a $USBDEVICE
1703    fi
1704    # Some distro do auto mount at that point (Ubuntu)
1705    LogAll "INFO: Unmounting $USBPART just in case again"
1706    sync
1707    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1708    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1709    if [ "`which dmsetup`" != "" ]; then
1710        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1711        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1712            LogAll "INFO: Removing $block_id from device mapper."
1713            sleep 1
1714            dmsetup remove $block_id
1715        fi
1716    fi
1717    part=$USBPART
1718    mount_opt=""
1719else
1720    # ISO image
1721    part=$MINDI_TMP/mindi-bootroot.img
1722    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1723    # Adds 10 MB to allow for additional space
1724    size=$(($size+10000))
1725    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1726    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1727    mount_opt="-o loop"
1728fi
1729
1730LogAll "INFO: Creating a vfat filesystem on $part"
1731
1732mkfs.vfat $part 2>&1 >> $LOGFILE
1733if [ $? -ne 0 ]; then
1734    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1735    if  [ "$target" = "USB" ]; then
1736        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1737        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1738    fi
1739    MindiExit -1
1740fi
1741if  [ "$target" = "ISO" ]; then
1742    if [ "$BOOT_TYPE" = "BIOS" ]; then
1743        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1744        # and run after the formating for versions > 6 it seems
1745        syslinux $part >> $LOGFILE 2>> $LOGFILE
1746    fi
1747fi
1748LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1749mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1750if [ $? -ne 0 ]; then
1751    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1752    if  [ "$target" = "USB" ]; then
1753        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1754        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1755    fi
1756    MindiExit -1
1757fi
1758
1759LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1760mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1761if [ $? -ne 0 ] ; then
1762    LogFile "--------------------------------"
1763    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1764    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1765    LogFile "--------------------------------"
1766    sync
1767    umount $MINDI_TMP/mpt
1768    LogAll "ERROR: Problems while creating boot media."
1769    LogAll "       Please unload some of your modules and try again."
1770    Die    "       Try using another temporary directory instead of $MINDI_TMP"
1771fi
1772
1773if  [ "$target" = "ISO" ]; then
1774    if [ "$ARCH" != "ia64" ]; then
1775        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1776    fi
1777    # ISO
1778    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1779        CMD="$ISO_CMD $ISO_OPT"
1780        MakeISO
1781    else
1782        if [ "$ARCH" = "ia64" ]; then
1783            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1784        else
1785            # UEFI
1786            echo "$CMD" | grep -q "xorriso"
1787            if [ $? -eq 0 ]; then
1788                XOV=`xorriso --version 2>&1 | head -1 | awk '{print $3}'`
1789                XOVMAJ=`echo $XOV | cut -d. -f1`
1790                XOVMIN=`echo $XOV | cut -d. -f2`
1791                if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
1792                    CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
1793                else
1794                    CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
1795                fi
1796            else
1797                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1798            fi
1799        fi
1800    fi
1801fi
1802
1803# Avoids graphical tool to keep the FS mounted
1804sync
1805umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1806
1807if  [ "$target" = "ISO" ]; then
1808    cp $part $MINDI_CACHE
1809    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
1810        # Mount again !
1811        LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
1812        mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1813        # We just need the EFI dir and the boot image for this case
1814        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1815        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1816        # We need again the kernel+initrd at the root for UEFI boot at least
1817        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1818        # We need the boot image now and what mindi needs at restore time as well
1819        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1820        # Avoids graphical tool to keep the FS mounted
1821        sync
1822        umount $MINDI_TMP/mpt2
1823        LogFile "----------- target dir content -----------"
1824        LogFile "------------------------------------------"
1825        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1826        LogFile "------------------------------------------"
1827        MakeISO
1828    fi
1829else
1830    # USB
1831    if [ "$ARCH" != "ia64" ] ; then
1832        syslinux -v 2>&1 | grep -q 4.02
1833        if [ $? -eq 0 ]; then
1834            # This buggy version of syslinux requires a call to --stupid and not -s
1835            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1836            res=$?
1837        else
1838            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1839            res=$?
1840        fi
1841        if [ $res -ne 0 ] ; then
1842            LogAll "----------- syslinux's errors --------------"
1843            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1844            LogAll "------------------------------------------"
1845            LogAll "ERROR: Failed to create USB image."
1846        else
1847            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1848        fi
1849        rm -f $MINDI_TMP/syslinux.log
1850    else
1851        LogAll "ERROR: No USB boot support for ia64"
1852        MindiExit -1
1853    fi
1854fi
1855}
1856
1857
1858OfferToMakeBootableUSB() {
1859
1860local i files
1861
1862if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1863    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1864    read i
1865    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1866    if [ "$USBDEVICE" = "" ]; then
1867        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1868        read dev
1869        USBDEVICE=$dev
1870    fi
1871    echo "WARNING: This will erase all content on $USBDEVICE"
1872    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1873    read i
1874    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1875else
1876    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1877        Die "No USBDEVICE environment variable declared, aborting"
1878    fi
1879fi
1880USBPART="${USBDEVICE}1"
1881
1882MakeBootableDevice USB
1883}
1884
1885
1886OfferToMakeBootableISO() {
1887
1888local i files
1889
1890if [ -z "$ISO_CMD" ]; then
1891    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1892    return
1893fi
1894
1895if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1896    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1897    read i
1898    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1899fi
1900
1901MakeBootableDevice ISO
1902}
1903
1904
1905MakeMessageFile() {
1906   
1907    if [ -x "/bin/lsb_release" ]; then
1908        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1909    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1910        DESC="Arch Linux"
1911        if [ -r /var/log/pacman.log ]; then
1912            # there are no releases but we can get the last system upgrade
1913            # Output example:   Arch Linux [2011-03-03 01:39]
1914            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1915        fi
1916    elif [ -x "/etc/os-release" ]; then
1917        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1918    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1919        # For pb >= 0.9.8
1920        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1921    elif [ -r /etc/issue.net ]; then
1922        DESC=`head -1 /etc/issue.net`
1923    elif [ -r /etc/issue ]; then
1924        DESC=`head -1 /etc/issue`
1925    else
1926        DESC="Unknown desc"
1927    fi
1928    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1929    if [ _"$MONDO_SHARE" != _"" ]; then
1930        if [ "$CDRECOVERY" != "yes" ] ; then
1931            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1932                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1933                echo -en "$BOOT_MEDIA_MESSAGE"
1934            elif [ ! "$MINDI_TMP" ] ; then
1935                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1936                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1937                    echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1938                fi
1939            else
1940                echo -en "$BOOT_MEDIA_MESSAGE"
1941            fi
1942        else
1943            echo -en "\
1944To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1945CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1946        fi
1947    fi
1948
1949    # Also create the other help screens
1950    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1951    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1952    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1953}
1954
1955
1956MakeBootConfFile() {
1957    local options i ooo
1958    options=""
1959    # Type of boot file (elilo or syslinux/isolinux)
1960    type=$1
1961    if [ "$type" = "elilo" ] || [ "$type" = "grub2" ]; then
1962        sep="="
1963        sepdef="="
1964    else
1965        sep=" "
1966        sepdef=" "
1967    fi
1968
1969    # Generic header for conf file
1970    if [ "$type" = "elilo" ]; then
1971        echo -en "prompt\n"
1972    elif [ "$type" = "grub" ]; then
1973        echo -en "pause Press a key when ready to restore\n"
1974    elif [ "$type" = "grub2" ]; then
1975        echo -en "set "
1976    else
1977        # syslinux family
1978        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1979    fi
1980
1981    # Compute which default option to boot from
1982    echo -en "default${sepdef}"
1983    if [ "$CDRECOVERY" = "yes" ] ; then
1984        if [ "$type" = "grub" ]; then
1985            # TODO: Which num ???
1986            echo -en "0\n"
1987        else
1988            echo -en "RESTORE\n"
1989        fi
1990    # In case it's mondoarchive
1991    elif [ _"$MONDO_SHARE" != _"" ]; then
1992        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1993            if [ "$type" = "grub" ]; then
1994                echo -en "3\n"
1995            else
1996                echo -en "iso\n"
1997            fi
1998        else
1999            if [ "$type" = "grub" ]; then
2000                echo -en "1\n"
2001            else
2002                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
2003            fi
2004        fi
2005    else
2006        if [ "$type" = "grub" ]; then
2007            echo -en "0\n"
2008        else
2009            echo -en "expert\n"
2010        fi
2011    fi
2012
2013    # Handle timeout
2014    if [ "$type" = "grub2" ]; then
2015        seppref="set "
2016    else
2017        seppref=""
2018    fi
2019    if [ "$CDRECOVERY" = "yes" ] ; then
2020        echo -en "${seppref}timeout${sep}10000\n"
2021    else
2022        echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
2023    fi
2024    echo -en "\n"
2025
2026    # prepare which labels will be generated
2027    if [ "$CDRECOVERY" = "yes" ] ; then
2028        options="RESTORE expert"
2029    else
2030        if [ _"$MONDO_SHARE" != _"" ]; then
2031            options="interactive expert compare iso nuke isonuke"
2032        else
2033            options="expert"
2034        fi
2035    fi
2036
2037    # Generate rest of conf file
2038    for i in $options ; do
2039        ooo=$i
2040        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2041        if [ "$type" = "elilo" ]; then
2042            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2043        elif [ "$type" = "grub" ]; then
2044            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2045        elif [ "$type" = "grub2" ]; then
2046            if [ "$BOOT_TYPE" = "UEFI" ]; then
2047                lorder="linuxefi"
2048                iorder="initrdefi"
2049            else
2050                lorder="linux"
2051                iorder="initrd"
2052            fi
2053            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2054        else
2055            ps="/"
2056            if [ $KERNEL_IS_XEN = "no" ]; then
2057                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2058            else
2059                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2060            fi
2061        fi
2062        echo -en "$outstr"
2063    done
2064    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2065        if [ "$type" = "elilo" ]; then
2066            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2067            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2068        elif [ "$type" = "grub" ]; then
2069            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2070        elif [ "$type" = "grub2" ]; then
2071            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2072        else
2073            ps="/"
2074            if [ "$type" = "syslinux" ]; then
2075                ps=""
2076            fi
2077            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2078            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2079        fi
2080    fi
2081}
2082
2083ParseModprobeForIncludes() {
2084local MODPROBE_CONF mpincfile includes include
2085
2086MODPROBE_CONF=/etc/modprobe.conf
2087mpincfile=$1
2088touch $mpincfile
2089if [ -a $MODPROBE_CONF ]; then
2090    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2091    if [ -n "$includes" ]; then
2092        for include in $includes
2093        do
2094            if [ -a "$include" ]; then
2095                echo $include >> $mpincfile
2096            fi
2097        done
2098    fi
2099fi
2100}
2101
2102PrepareBootDir() {
2103
2104    local detect
2105    # Needs a bigdir variable setup before calling it
2106
2107    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2108    # to get it on the media (in addition to the boot part
2109    # and also to support UEFI boot mechanism
2110    if [ "$boottype" != "" ]; then
2111        detect="no"
2112    else
2113        detect="yes"
2114        boottype=syslinux
2115    fi
2116    bootdir=$bigdir/$boottype
2117    bootconf="$bootdir/$boottype.cfg"
2118    mkdir -p $bootdir
2119    FindLdlinux32Binary
2120
2121    if [ "$BOOT_TYPE" != "BIOS" ]; then
2122        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2123            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2124            MindiExit -1
2125        fi
2126
2127        mountefi=0
2128        # EFI or UEFI
2129        # TODO: names are hard-coded for now
2130        if [ "$BOOT_TYPE" = "UEFI" ]; then
2131            # UEFI
2132            efidir=$bigdir/EFI/BOOT
2133            # Auto-detection if needed
2134            if [ $detect = "yes" ]; then
2135
2136                # mount /boot/efi if needed
2137                df -T | grep /boot/efi | grep -qE 'vfat'
2138                if [ $? -ne 0 ]; then
2139                    mount /boot/efi
2140                    if [ $? -ne 0 ]; then
2141                        echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2142                        MindiExit -1
2143                    fi
2144                    mountefi=1
2145                fi
2146
2147                # On RHEL6 grub works
2148                dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2149                dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2150                if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
2151                    boottype=grub
2152                elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
2153                    boottype=grub2
2154                elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
2155                    boottype=grub2
2156                elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
2157                    boottype=grub2
2158                else
2159                    # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2160                    boottype=syslinux
2161                fi
2162            fi
2163            if [ "$boottype" = "syslinux" ]; then
2164                if [ ! "$bootbin" ]; then
2165                    FindSyslinux64EFI
2166                    bootbin=$SYSLINUX64EFI
2167                fi
2168                bootconf="$efidir/syslinux.cfg"
2169            elif [ "$boottype" = "grub" ]; then
2170                if [ ! "$bootbin" ]; then
2171                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2172                fi
2173                bootconf="$efidir/BOOTX64.conf"
2174            elif [ "$boottype" = "grub2" ]; then
2175                if [ ! "$bootbin" ]; then
2176                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2177                fi
2178                bootconf="$efidir/grub.cfg"
2179            fi
2180
2181            # Depending on the arch, the target boot file is different
2182            if [ "$ARCH" = "x86_64" ] ; then
2183                tgbin="BOOTX64.efi"
2184            elif [ "$ARCH" = "armv8" ]; then
2185                tgbin="BOOTAA64.efi"
2186            else
2187                # i?386
2188                tgbin="BOOTIA32"
2189            fi
2190        else
2191            # EFI
2192            efidir=$bootdir
2193            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2194            tgbin=$bootbin
2195            boottype=elilo
2196            bootconf="$efidir/elilo.conf"
2197        fi
2198        LogAll "INFO: Found $boottype boot type"
2199        mkdir -p $efidir
2200        cp $bootbin $efidir/$tgbin
2201
2202        if [ $mountefi -eq 1 ]; then
2203            umount /boot/efi 2>&1 > /dev/null
2204        fi
2205
2206        if [ $boottype = "syslinux" ]; then
2207            FindLdlinuxe64Binary
2208            if [ -e "$LDLINUXE64" ]; then
2209                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2210                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2211                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
2212                if [ -e $LDLINUXE64/../isolinux.c32 ]; then
2213                    cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
2214                fi
2215            fi
2216        fi
2217        # tgdir for syslinux
2218        tgdir=$bigdir/EFI
2219    else
2220        # tgdir for syslinux
2221        tgdir=$bootdir
2222    fi
2223    # In all cases prepare syslinux content for BIOS mode
2224    # so that we can have multi boot mode media BIOS+UEFI
2225    # Useful for syslinux 5.x
2226    if [ -e "$LDLINUXC32" ]; then
2227        LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
2228        cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
2229    fi
2230    if [ -e $LDLINUXC32/../isolinux.c32 ]; then
2231        LogFile "INFO: Copying isolinux.c32 to $tgdir"
2232        cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
2233    fi
2234
2235    MakeBootConfFile $boottype > $bootconf
2236    LogFile "Boot Conf file $bootconf content is:"
2237    LogFile "------------------------------------"
2238    cat $bootconf >> $LOGFILE
2239    LogFile "------------------------------------"
2240    if [ "$BOOT_TYPE" = "UEFI" ]; then
2241        # Also generate the syslinux conf
2242        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2243        LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2244        LogFile "---------------------------------------------------"
2245        cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2246        LogFile "---------------------------------------------------"
2247    fi
2248
2249}
2250
2251PrepareBigDirTar() {
2252    echo -en "INFO: Tarring and zipping the data content..."
2253    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2254    LogFile "Size of the data content"
2255    LogFile "------------------------"
2256    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2257    LogFile "------------------------"
2258    echo -e "$DONE"
2259
2260}
2261
2262CleanBigDir() {
2263    [ "$bigdir" != "/" ] && echo $bigdir | grep -vq $MINDI_TMP && rm -rf $bigdir
2264}
2265
2266PrepareBigDir() {
2267    local needlist diskdir res i j k lines lfiles includefile
2268
2269    rm -f $MINDI_CACHE/mindi.iso
2270    needlist=$MINDI_TMP/what-we-need.txt
2271    mkdir -p $bigdir/usr/bin
2272    mkdir -p $bigdir/usr/sbin
2273    includefile=$MINDI_TMP/$$.includefile.txt
2274
2275    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2276    if [ -e "$DEPLIST_FILE" ]; then
2277        lfiles="$DEPLIST_FILE $lfiles"
2278    fi
2279    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2280    ParseModprobeForIncludes $includefile
2281    lines=$(($lines+`cat $includefile | wc -l`))
2282    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2283    res=$?
2284    rm -f $includefile
2285    ListKernelModulePaths >> $needlist
2286    if [ "$res" -ne "0" ] ; then
2287        Die "You have $res files present in dependency list\nbut absent from filesystem."
2288    fi
2289    mkdir -p $bigdir/tmp
2290    if [ _"$MONDO_SHARE" != _"" ]; then
2291        # TODO: no reason to have the cfg file stored twice
2292        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2293        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2294    fi
2295
2296    # Needs to be done after the MRCFG creation
2297    FindAndAddUserKeyboardMappingFile
2298
2299    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2300    DropOptimizedLibraries $needlist $bigdir
2301    echo -en "INFO: Assembling dependency files"
2302
2303    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2304    rm -f $needlist
2305    echo -e "$DONE"
2306
2307    # also copy io.sys and msdos.sys, if we can find them
2308    for i in `mount | cut -d' ' -f3` ; do
2309        for j in io.sys msdos.sys ; do
2310            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2311        done
2312    done
2313
2314    # master boot record, too
2315    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2316    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2317        LogAll "INFO: Backing up $i's MBR"
2318        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2319        sleep 1
2320        sync
2321        j=$i
2322        [ -h "$j" ] && j=`readlink -f $j`
2323        LogAll "INFO: Creating /dev/boot_device ($j)"
2324        mkdir -p $bigdir/dev
2325        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2326    fi
2327
2328    # Get terminfo content
2329    ti="usr/share/terminfo/l"
2330    if [ -d /$ti ]; then
2331        mkdir -p $bigdir/$ti
2332        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2333    fi
2334    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2335        cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2336        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2337        cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2338    fi
2339    if [ -d "/lib/dev-state" ]; then 
2340        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2341    fi
2342    MakeMountlist $MINDI_TMP/mountlist.txt
2343    CheckMountlist $MINDI_TMP/mountlist.txt
2344    mkdir -p $bigdir/tmp
2345    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2346    if [ _"$MONDO_SHARE" != _"" ]; then
2347        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2348    fi
2349    if [ $LVM != "false" ]; then
2350        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2351        if [ $? -ne 0 ]; then
2352            LVM="false"
2353            rm -f $bigdir/tmp/i-want-my-lvm
2354        else
2355            LogFile "Your i-want-my-lvm file content is:"
2356            LogFile "-----------------------------------"
2357            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2358            LogFile "-----------------------------------"
2359        fi
2360    fi
2361    LogFile "INFO: Your mountlist.txt file content is:"
2362    LogFile "-----------------------------------"
2363    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2364    LogFile "-----------------------------------"
2365
2366    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2367    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2368    if [ _"$MONDO_SHARE" != _"" ]; then
2369        for q in filelist.full.gz biggielist.txt ; do
2370            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2371            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2372        done
2373    fi
2374
2375    PrepareBootDir
2376
2377}
2378
2379
2380Prompt() {
2381    echo -en "$1"
2382    read line
2383}
2384
2385
2386ReadLine() {
2387    local i incoming
2388    read incoming
2389    i=0
2390    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2391        i=$(($i+1))
2392        read incoming
2393    done
2394    echo "$incoming"
2395}
2396
2397
2398SizeOfPartition() {
2399    local devpath drive res stub
2400    device=$1
2401    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2402        Die "Cannot find $device's size - is your /etc/fstab sane?"
2403    fi
2404    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2405        res=`SizeOfRaidPartition $device`
2406        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2407        echo "$res"
2408        return 0
2409    fi
2410    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2411    res=`$FDISK -s $device 2>> $LOGFILE`
2412    # end patch
2413    # take only the first in case of multiple mount (cifs, nfs, ...)
2414    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2415    [ "$res" = "" ] && res="-1"
2416    echo $res
2417    return 0
2418}
2419
2420
2421SizeOfRaidPartition() {
2422    local real_dev smallest_size silly tmp
2423
2424    silly=999999999
2425    smallest_size=$silly
2426
2427    for real_dev in `GetRaidDevMembers $1` ; do
2428        tmp=`SizeOfPartition $real_dev`
2429        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2430    done
2431
2432    if [ "$smallest_size" = "$silly" ] ; then
2433        echo "-1"
2434        return 1
2435    else
2436        echo "$smallest_size"
2437        return 0
2438    fi
2439}
2440
2441
2442StripExecutable()
2443{
2444    local tmpfile
2445
2446    tmpfile=$MINDI_TMP/stripped.$$.dat
2447    [ -d "$1" ] || [ -h "$1" ] && return
2448    cp -f $1 $tmpfile 2>> $LOGFILE
2449    strip $tmpfile 2> /dev/null
2450    if [ $? -eq 0 ] ; then
2451        cp -f $tmpfile $1 2>> $LOGFILE
2452        LogFile "INFO: Stripped binary $2"
2453    fi
2454    rm -f $tmpfile
2455}
2456
2457KernelVer() {
2458        local fkern_ver fname
2459
2460        fname=$1
2461        file $fname | grep -q gzip
2462        if [ $? -eq 0 ] ; then
2463            # Used by ia64
2464            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2465        else
2466            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2467        fi
2468        echo "$fkern_ver"
2469}
2470
2471
2472# WARNING: This function should just echo the final result !!!
2473#
2474TryToFindKernelPath() {
2475    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2476
2477    we_want_version=$KERVERRUN
2478    possible_kernels=""
2479    duff_kernels=""
2480    output=""
2481
2482    if [ "$ARCH" = "ia64" ] ; then
2483       root="/boot/efi/efi"
2484    else
2485       root="/"
2486    fi
2487    # See if we're booted from a Xen kernel
2488    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2489    if [ -f /proc/xen/capabilities ]; then
2490        # It's a Xen kernel
2491        KERNEL_IS_XEN="yes"
2492        LogFile "INFO: It's a Xen kernel..."
2493    fi
2494
2495    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2496        [ ! -e "$fname" ] && continue
2497        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2498        fkern_ver=`KernelVer $fname`
2499        [ "$fkern_ver" = "" ] && continue
2500        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2501        [ -f "$fname" ] || continue
2502        [ -h "$fname" ] && continue
2503        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2504        file $fname | grep -q gzip
2505        if [ $? -eq 0 ] ; then
2506            # Used by ia64
2507            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2508                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2509                duff_kernels="$fname $duff_kernels"
2510            else
2511                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2512                possible_kernels="$fname $possible_kernels"
2513            fi
2514        else
2515            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2516                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2517                duff_kernels="$fname $duff_kernels"
2518            else
2519                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2520                possible_kernels="$fname $possible_kernels"
2521            fi
2522        fi
2523    done
2524    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2525        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
2526    fi
2527    if [ ! "$possible_kernels" ] ; then
2528        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2529        possible_kernels="$duff_kernels"
2530        if [ ! "$possible_kernels" ] ; then
2531            LogAll "INFO: Sorry, no duff kernels either"
2532        else
2533            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2534            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2535        fi
2536    fi
2537    if [ $KERNEL_IS_XEN = "yes" ]; then
2538        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2539        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2540    fi
2541    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2542    noof_kernels=`CountItemsIn "$possible_kernels"`
2543    if [ "$noof_kernels" -eq "0" ] ; then
2544        LogAll "Could not find your kernel."
2545        if [ -e "/boot/vmlinuz" ] ; then
2546            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2547            output=/boot/vmlinuz
2548        else
2549            output=""
2550        fi
2551    elif [ "$noof_kernels" -eq "1" ] ; then
2552        kp=`echo "$possible_kernels" | sed s/' '//`
2553        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2554        output="$kp"
2555    else
2556        for i in $possible_kernels ; do
2557            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2558                LogAll "INFO: OK, I used my initiative and found that "
2559                LogAll "INFO: $i is probably your kernel. "
2560                output="$i"
2561                break
2562            fi
2563        done
2564        if [ ! -n "$output" ]; then
2565            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2566                output=/boot/vmlinuz
2567                LogFile "INFO: Schlomo, this one's for you."
2568            else
2569                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2570                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2571                LogFile "INFO: $possible_kernels"
2572                output=""
2573            fi
2574        fi
2575    fi
2576    if [ $KERNEL_IS_XEN = "yes" ]; then
2577        if [ "$noof_xenkernels" -eq "0" ]; then
2578            xenkernelpath=""
2579        elif [ "$noof_xenkernels" -eq "1" ]; then
2580            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2581            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2582        else
2583            for i in $possible_xenkernels ; do
2584                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2585                    LogFile "INFO: OK, I used my initiative and found that "
2586                    LogFile "INFO: $i is probably your Xen kernel. "
2587                    xenkernelpath="$i"
2588                    break
2589                fi
2590            done
2591            if [ ! -n "$xenkernelpath" ]; then
2592                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2593                if [ ! -n "$new_possible_xenkernels" ]; then
2594                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2595                    LogFile "INFO: Using $xenkernelpath"
2596                else
2597                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2598                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2599                    LogFile "INFO: $possible_xenkernels"
2600                    output=""
2601                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2602                    LogFile "INFO: Using $xenkernelpath"
2603                fi
2604            fi
2605        fi
2606        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2607            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2608        fi
2609    fi
2610    #LogAll "TryToFindKernelPath found $output"
2611    echo "$output"
2612}
2613
2614CopyFromConf() {
2615
2616    conf=$1
2617    mp=$2
2618    echo -en "INFO: Gathering dependencies of $conf.conf..."
2619    LogFile "INFO: Gathering dependencies of $conf.conf..."
2620    lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf | sort -u`
2621    noof_lines=`echo $lis2 | wc -w`
2622    progress=0
2623    # Get only the files which exist in that list
2624    # and potentially their symlink structure
2625    # put apart directories for later handling
2626    for f in $lis2; do
2627        if [ -d $f ]; then
2628            for g in `find $f`; do
2629                echo $g >> $MINDI_TMP/$conf.lis
2630                LocateDeps $g  >> $MINDI_TMP/$conf.lis2
2631            done
2632            lis3="$lis3 $f"
2633        else
2634            if [ -r $f ]; then
2635                echo $f >> $MINDI_TMP/$conf.lis
2636                LocateDeps $f >> $MINDI_TMP/$conf.lis2
2637            fi
2638        fi
2639        progress=$(($progress+1))
2640        LogProgress $progress $noof_lines
2641    done
2642    echo -e "$DONE"
2643    LogAll "INFO: Processing all dependencies links for $conf.conf..."
2644    # And their deps except dirs
2645    lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
2646    rm -f $MINDI_TMP/$conf.lis2
2647    finallist=""
2648    # Remove directories from the list, as cp will create them anyway
2649    # and it may hurt if /lib is in it as on Debian/Ubuntu
2650    # recent bash says that -d is true for a link to a dir !
2651    for f in $lines; do
2652        if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2653            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2654            if [ ! -e "$mp/$f" ]; then
2655                finallist="$finallist $f"
2656            fi
2657        fi
2658    done
2659    # But adds the directory useful in $lis3
2660    fnllist=`echo $finallist $lis3 | tr ' ' '\n' | sort -u | tr '\n' ' '`
2661    LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
2662    cp -a --parents $fnllist -t $mp/ 2> $templog  || LogAll "WARNING: Problem in $conf analysis" $templog
2663    rm -f $MINDI_TMP/$conf.lis
2664}
2665
2666PrepareTargetDir() {
2667    local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2668
2669    tgz_dir_fname=$MINDI_LIB/rootfs
2670    rdz_fname=$MINDI_TMP/initrd.img
2671    kernelsize=`du -sk $kernelpath | cut -f1`
2672    res=0 
2673    templog=$MINDI_TMP/$$.log
2674    > $templog
2675
2676    mkdir -p $targetdir
2677    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2678    for d in bin sbin lib lib64; do
2679        if [ -h "/$d" ]; then
2680            thelink=`readlink /$d`
2681            mkdir -p $targetdir/$thelink || LogAll "ERROR: Unable to create $thelink in $targetdir"
2682            mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
2683            if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
2684                rmdir $targetdir/$d
2685            fi
2686            if [ ! -h $targetdir/$d ]; then
2687                rm -f $targetdir/$d 2> /dev/null
2688                (cd $targetdir ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
2689            fi
2690        fi
2691    done
2692
2693    LogFile "INFO: what is now in $targetdir"
2694    ls -al $targetdir >> $LOGFILE
2695   
2696    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2697    # copy from rootfs into targetdir
2698    LogAll "INFO: Copying Mindi files onto $targetdir"
2699    for f in $tgz_dir_fname/*; do
2700        if [ ! -r $f ]; then
2701            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2702        else
2703            cp -af $f $targetdir 2>&1 >> $LOGFILE
2704        fi
2705    done
2706    (cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2707    # kernel expects linuxrc in ext2 filesystem
2708    (cd $targetdir ; ln -sf usr/sbin/init linuxrc)
2709    # kernel expects init in cpio filesystem
2710    (cd $targetdir ; ln -sf usr/sbin/init init)
2711
2712    (cd $targetdir/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2713
2714    for w in insmod.static insmod.static.old ; do
2715        s=`which $w 2> /dev/null`
2716        if [ -e "$s" ] ; then
2717            tar cf - -C / $s 2> /dev/null | (cd $targetdir ; tar xf -)
2718        fi
2719    done
2720
2721    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2722   
2723    # Copy of files mandatory for ssh to automate mount if sshfs is used
2724    mkdir -p $targetdir/.ssh $targetdir/tmp
2725    cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
2726    cat > $targetdir/tmp/myssh << EOF
2727ssh -o StrictHostKeyChecking=no \$*
2728EOF
2729    chmod 755 $targetdir/tmp/myssh
2730
2731    # Copy of files mandatory for ld.so
2732    cp -a /etc/ld.so.c* $targetdir/etc
2733
2734    # Handle the case where busybox and mount are dynamically linked
2735    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2736    if [ $? -eq 0 ]; then
2737        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2738        rm -f $targetdir/bin/mount
2739    fi
2740
2741    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2742    CopyFromConf minimal $targetdir
2743
2744    # For older distributions expecting /sbin/init provides it
2745    if [ ! -e "$targetdir/sbin/init" ]; then
2746        (cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
2747    fi
2748
2749    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2750    (cd $targetdir ; ln -sf /bin/bash bin/sh)
2751    LogFile "INFO: Using bash as default shell"
2752
2753    # Avoids an issue on some distro (RHEL5)
2754    rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
2755
2756    # Management of DRBD
2757    which drbdadm &> /dev/null
2758    if [ $? -eq 0 ]; then
2759        # Do we find DRBD devices setup
2760        drbdadm sh-dev all | grep -E '^/dev' &> /dev/null
2761        if [ $? -eq 0 ]; then
2762            CopyFromConf drbd $targetdir
2763        fi
2764        # DRBD requires net activation
2765        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
2766    fi
2767
2768    # Management of udev (which includes modprobe in rules)
2769    ps auxww | grep -v grep | grep -qw udevd
2770    if [ $? -eq 0 ]; then
2771        echo "udev device manager found" > $targetdir/tmp/USE-UDEV
2772        LogFile "INFO: udev device manager found"
2773        tar cf - -C / /etc/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /etc/udev analysis" $templog
2774        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2775        rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2776        # Do not do it if it's a link (Ubuntu 64 bits #503)
2777        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2778            tar cf - -C / /lib64/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2779        fi
2780        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2781            tar cf - -C / /lib32/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2782        fi
2783        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2784            tar cf - -C / /lib/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /lib/udev analysis" $templog
2785        fi
2786        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2787            tar cf - -C / /usr/lib/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2788        fi
2789        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2790            CopyFromConf udev $targetdir
2791        else
2792            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2793            LogAll "         mindi will use static devices which may cause problems"
2794            rm -f $targetdir/tmp/USE-UDEV
2795        fi
2796    fi
2797
2798    # Management of potential HW info (ProLiant only at the moment)
2799    rm -rf $MINDI_CACHE/bkphw
2800    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2801    if [ -d $MINDI_CACHE/bkphw ]; then
2802        LogAll "INFO: Hardware Information found and saved ..."
2803        cp -rp $MINDI_CACHE/bkphw $targetdir
2804        if [ -f $MINDI_CACHE/tools.files ]; then
2805            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2806            LocateDeps $lis > $MINDI_TMP/tools.lis
2807            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
2808        fi
2809        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2810            mv -f $MINDI_CACHE/mindi-rsthw $targetdir
2811            chmod 755 $targetdir/mindi-rsthw
2812        fi
2813        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2814    fi
2815
2816    # Management of perl scripts delivered needed at restore time
2817    LogAll "INFO: Analyzing perl modules dependencies..."
2818    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2819    LogFile "DBG4: Perl Modules found:"
2820    LogFile "-------------------------"
2821    cat $MINDI_TMP/perl.lis >> $LOGFILE
2822    LogFile "-------------------------"
2823    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
2824
2825    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
2826
2827    needed_modules=""
2828    list_of_mods="$CDROM_MODS $FORCE_MODS"
2829
2830    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2831        # For PXE boot
2832        list_of_mods="$list_of_mods $NET_MODS"
2833    fi
2834    for i in $DENY_MODS; do
2835        LogFile "INFO: Removing $i from the list of modules to load"
2836        list_of_mods=`echo ${list_of_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2837    done
2838
2839    if [ "${kernelname}" != "" ]; then
2840        needed_modules_path=lib/modules/${kernelname}
2841        mkgmopt="-k ${kernelname}"
2842    else
2843        needed_modules_path=lib/modules/$KERVERRUN
2844        mkgmopt="-k $KERVERRUN"
2845    fi
2846
2847    [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2848    LogAll "INFO: Analyzing kernel modules dependencies..."
2849    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_mods`
2850
2851    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2852    cp --parents -aL $needed_modules $targetdir/ 2> $templog || LogAll "ERROR: Unable to copy modules to $targetdir" $templog
2853
2854    # Uncompress modules if not using udev and native modprobe
2855    if [ ! -f $targetdir/tmp/USE-UDEV ]; then
2856        for i in $needed_modules; do
2857            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2858                gunzip -f $targetdir/$i
2859            fi
2860            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2861                bunzip2 -f $targetdir/$i
2862            fi
2863            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2864                unxz -f $targetdir/$i
2865            fi
2866            LogFile "INFO: Uncompressing $i"
2867        done
2868    fi
2869
2870    # Also copy modules.* in case of udev so that normal modprobe works
2871    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$targetdir" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
2872
2873    # Copy FW in case some drivers needs it
2874    for d in "/lib" "/usr/lib"; do
2875        if [ -d "$d/firmware" -a ! -h $d ]; then
2876            cp -a "$d/firmware" "$targetdir$d"
2877        fi
2878    done
2879
2880    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2881    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2882        if [ -d "$d/multipath" -a ! -h $d ]; then
2883            cp -a "$d/multipath" "$targetdir$d"
2884        fi
2885    done
2886
2887    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2888    (cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
2889
2890    # Copy an additional ProLiant tool for OBDR support
2891    if [ -f $MINDI_TMP/OBDR ]; then
2892        found=0
2893        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2894            mkdir -p $targetdir/usr/bin
2895            cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
2896            LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2897            found=1
2898        fi
2899        if [ -x /usr/bin/sg_wr_mode ]; then
2900            mkdir -p $targetdir/usr/bin
2901            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2902            LocateDeps $lis > $MINDI_TMP/obdr.lis
2903            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
2904            LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2905            found=1
2906        fi
2907        if [ $found -eq 0 ]; then
2908            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2909            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2910        fi
2911    fi
2912
2913    if [ ! -e "/sbin/devfsd" ]; then
2914        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2915        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2916        rm -f $targetdir/sbin/devfsd
2917    fi
2918    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
2919    if [ _"$MONDO_SHARE" != _"" ]; then
2920        MakeMondoConfigFile $targetdir/tmp/$MRCFG
2921        cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2922        cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2923        echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
2924        echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
2925    fi
2926
2927    # Create module list to load at restore time
2928    rm -f $targetdir/tmp/modules
2929    for m in $CDROM_MODS; do
2930        echo $m >> $targetdir/tmp/modules
2931    done
2932
2933    mkdir -p $targetdir/proc
2934    LogFile "---------------------------"
2935    LogFile "Content of initial targetdir:"
2936    LogFile "---------------------------- "
2937    (cd "$targetdir" ; ls -Rla ) >> $LOGFILE
2938    LogFile "---------------------------"
2939}
2940
2941CleanTargetDir() {
2942    [ "$targetdir" != "/" ] && rm -rf $targetdir
2943}
2944
2945PatchBootFiles() {
2946
2947    # Patch the real value of RAMDISK_SIZE now we have it
2948    if [ -d "$bigdir/syslinux" ]; then
2949        find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
2950    fi
2951    if [ -d "$bigdir/EFI" ]; then
2952        find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
2953    fi
2954    for i in `cat $MINDI_TMP/bootf.lis`; do
2955        perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
2956    done
2957    rm -f $MINDI_TMP/bootf.lis
2958
2959}
2960
2961MakeBootInitFile() {
2962
2963    local mountpoint tempfile res
2964    tempfile=$MINDI_TMP/temp.rd
2965    res=0
2966
2967    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2968    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2969
2970    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2971    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2972    res=$(($res+$?))
2973
2974    mountpoint=$MINDI_TMP/mountpoint.$$
2975    mkdir -p $mountpoint
2976    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2977    [ "$targetdir" = "/" ] && echo $targetdir | grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
2978    mv $targetdir/* $targetdir/.??* $mountpoint || Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
2979    res=$(($res+$?))
2980    rmdir $targetdir
2981
2982    LogFile "INFO: initrd image is $rdz_fname"
2983    # Determine what filesystem to use for initrd image
2984    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2985    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2986    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2987    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2988        # say what will be used
2989        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2990        # unmount loop filesystem and create image file using the standard approach
2991        sync
2992        umount $mountpoint || Die "Cannot unmount $tempfile"
2993        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2994        res=$(($res+$?))
2995        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2996            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2997        else
2998            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2999        fi
3000        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
3001        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
3002        res=$(($res+$?))
3003        rm -f ${rdz_fname}.tmp
3004    elif [ "$gvFileSystem" = "initramfs" ]; then
3005        # say what will be used
3006        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
3007        # make sure that cpio is there
3008        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
3009        # create cpio image file and unmount loop filesystem
3010        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
3011        res=$(($res+$?))
3012        sync
3013        umount $mountpoint || Die "Cannot unmount $tempfile"
3014    else
3015        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
3016    fi
3017
3018    # log that we are done
3019    if [ "$res" -eq "0" ] ; then
3020        LogAll "INFO: MakeBootInitFile finished without error."
3021    else
3022        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
3023    fi
3024
3025    return 0
3026}
3027
3028
3029##############################################################################
3030#----------------------------------- Main -----------------------------------#
3031##############################################################################
3032
3033# Now we can create what we need
3034mkdir -p $MINDI_TMP
3035export bigdir=$MINDI_TMP/bigdir.$$
3036export targetdir=$MINDI_TMP/targetdir.$$
3037
3038# --nolog needs to be first, and is used in analyze-my-lvm
3039if [ "$1" = "--nolog" ] ; then
3040    shift
3041    LOGFILE=/dev/stderr
3042else
3043    > $LOGFILE
3044fi
3045if [ "$1" = "--printvar" ] ; then
3046    shift
3047    if [ _"$1" != _"" ] ; then
3048        set | grep -Ew "^$1" | cut -d= -f2
3049    fi
3050    exit 0
3051fi
3052
3053LogFile "mindi v$MINDI_VERSION"
3054LogFile "-----------------------------"
3055LogFile "Start date : `date`"
3056LogFile "-----------------------------"
3057LogFile "$ARCH architecture detected"
3058LogFile "mindi called with the following arguments:"
3059echo "$@">> $LOGFILE
3060LogFile "-----------------------------"
3061pbdistrocheck --version | grep Version >> $LOGFILE
3062LogFile "pbdistrocheck results:"
3063pbdistrocheck >> $LOGFILE
3064LogFile "-----------------------------"
3065LogFile "MondoRescue perl module:"
3066mr-getparam --version | grep Version >> $LOGFILE
3067LogFile "-----------------------------"
3068
3069# Log some capital variables
3070[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3071[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3072LogFile "MONDO_SHARE = $MONDO_SHARE"
3073LogFile "MINDI_LIB = $MINDI_LIB"
3074LogFile "MINDI_SBIN = $MINDI_SBIN"
3075LogFile "MINDI_CONF = $MINDI_CONF"
3076# Purge from potential old run
3077if [ _"$MINDI_CACHE" = _"" ]; then
3078    Die "MINDI_CACHE undefined"
3079else
3080    LogFile "MINDI_CACHE = $MINDI_CACHE"
3081fi
3082
3083if [ -f $MINDI_CONFIG ]; then
3084    LogFile "-----------------------------"
3085    LogFile " Mindi configuration file    "
3086    LogFile "-----------------------------"
3087    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3088    LogFile "-----------------------------"
3089fi
3090LogFile "In Mindi"
3091LogFile "--------"
3092LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3093LogFile "--------"
3094
3095trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3096
3097# Sanity checks
3098which which > /dev/null 2> /dev/null || Die "Please install 'which'."
3099which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
3100which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3101which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
3102if which awk &> /dev/null ; then
3103    if ! which gawk &> /dev/null ; then
3104        LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3105    fi
3106fi
3107which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3108[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3109
3110[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3111
3112# Update the PATH variable if incomplete
3113if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3114    PATH=$PATH:/sbin:/usr/sbin
3115    export PATH
3116    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3117    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3118    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3119fi
3120
3121if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3122    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3123fi
3124
3125### TODO
3126### Fix as it's not mandatory on ia64
3127if [ "$ARCH" = "ia64" ] ; then
3128    if which elilo &> /dev/null ; then
3129        LILO_EXE=elilo
3130    else
3131        LILO_EXE=`which false 2> /dev/null`
3132    fi
3133else
3134    FindIsolinuxBinary
3135fi
3136trap "Aborted" SIGTERM
3137DONE="\r\t\t\t\t\t\t\t\tDone.         "
3138kernelpath=""
3139MONDO_ROOT=/var/cache/mondo
3140mkdir -p $MONDO_ROOT
3141
3142if [ -d "/proc/lvm" ]; then
3143    # LVM v1
3144    LVMCMD=""
3145    LVM="v1"
3146elif [ -d "/dev/mapper" ]; then
3147    # LVM v2
3148    LVMCMD="lvm"
3149    LVM="v2"
3150else
3151    LVM="false"
3152fi
3153
3154if [ -e "/proc/cmdline" ]; then
3155    CMDLINE="/proc/cmdline"
3156elif [ -e "/tmp/cmdline" ]; then
3157    CMDLINE="/tmp/cmdline"
3158else
3159    CMDLINE="/dev/null"
3160fi
3161
3162LogFile "INFO: LVM set to $LVM"
3163LogFile "----------"
3164LogFile "mount result:"
3165LogFile "-------------"
3166mount >> $LOGFILE
3167if [ -e "/etc/raidtab" ]; then
3168    LogFile "-------------"
3169    LogFile "/etc/raidtab content:"
3170    LogFile "-------------"
3171    cat /etc/raidtab >> $LOGFILE
3172else
3173    LogFile "No file /etc/raidtab"
3174fi
3175if [ -e "/etc/mdadm.conf" ]; then
3176    LogFile "-------------"
3177    LogFile "/etc/mdadm.conf content:"
3178    LogFile "-------------"
3179    cat /etc/mdadm.conf >> $LOGFILE
3180else
3181    LogFile "-------------"
3182    LogFile "No file /etc/mdadm.conf"
3183fi
3184LogFile "-------------"
3185LogFile "cat $CMDLINE"
3186LogFile "-------------"
3187cat $CMDLINE >> $LOGFILE
3188LogFile "-------------"
3189LogFile "cat /proc/swaps:"
3190LogFile "-------------"
3191cat /proc/swaps >> $LOGFILE
3192LogFile "-------------"
3193if [ -e "/proc/mdstat" ]; then
3194    LogFile "cat /proc/mdstat:"
3195    LogFile "-------------"
3196    cat /proc/mdstat >> $LOGFILE
3197else
3198    LogFile "No pseudo file /proc/mdstat"
3199fi
3200LogFile "-------------"
3201LogFile "cat /proc/partitions:"
3202LogFile "-------------"
3203cat /proc/partitions >> $LOGFILE
3204LogFile "-------------"
3205LogFile "cat /proc/filesystems:"
3206LogFile "-------------"
3207cat /proc/filesystems >> $LOGFILE
3208LogFile "-------------"
3209LogFile "lsmod result:"
3210LogFile "-------------"
3211lsmod >> $LOGFILE
3212MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3213if [ -x /usr/sbin/esxcfg-module ]; then
3214    LogFile "-------------"
3215    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3216    LogFile "-------------"
3217    LogFile "VMWare modules"
3218    LogFile "-------------"
3219    /usr/sbin/esxcfg-module -l >> $LOGFILE
3220    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3221fi
3222LogFile "-------------" 
3223LogFile "FORCE_MODS:"
3224LogFile "-------------"
3225LogFile "$FORCE_MODS"
3226LogFile "-------------"
3227LogFile "DENY_MODS:"
3228LogFile "-------------"
3229LogFile "$DENY_MODS"
3230LogFile "-------------"
3231LogFile "df result:"
3232LogFile "----------"
3233df -aT >> $LOGFILE
3234LogFile "-------------"
3235LogFile "df -i result:"
3236LogFile "----------"
3237df -i >> $LOGFILE
3238LogFile "-------------"
3239if [ -r /boot/grub/menu.lst ]; then
3240    LogFile "-------------"
3241    LogFile "INFO: /boot/grub/menu.lst content"
3242    LogFile "-------------"
3243    cat /boot/grub/menu.lst >> $LOGFILE
3244    LogFile "-------------"
3245fi
3246if [ -r /boot/grub/grub.conf ]; then
3247    LogFile "-------------"
3248    LogFile "INFO: /boot/grub/grub.conf content"
3249    LogFile "-------------"
3250    cat /boot/grub/grub.conf >> $LOGFILE
3251    LogFile "-------------"
3252fi
3253if [ -r /boot/grub/grub.cfg ]; then
3254    LogFile "-------------"
3255    LogFile "INFO: /boot/grub/grub.cfg content"
3256    LogFile "-------------"
3257    cat /boot/grub/grub.cfg >> $LOGFILE
3258    LogFile "-------------"
3259fi
3260if [ -r /boot/grub/device.map ]; then
3261    LogFile "-------------"
3262    LogFile "INFO: /boot/grub/device.map content"
3263    LogFile "-------------"
3264    cat /boot/grub/device.map >> $LOGFILE
3265    LogFile "-------------"
3266fi
3267if [ -r /boot/grub2/device.map ]; then
3268    LogFile "-------------"
3269    LogFile "INFO: /boot/grub2/device.map content"
3270    LogFile "-------------"
3271    cat /boot/grub2/device.map >> $LOGFILE
3272    LogFile "-------------"
3273fi
3274if [ -r /etc/lilo.conf ]; then
3275    LogFile "-------------"
3276    LogFile "INFO: /etc/lilo.conf content"
3277    LogFile "-------------"
3278    cat /etc/lilo.conf >> $LOGFILE
3279fi
3280if [ -d /boot/efi ]; then
3281    gcf=`find /boot/efi -name 'grub.c*'`
3282    if [ _"$gcf" = _"" ]; then
3283        LogFile "Found a /boot/efi directory without a grub config file in it"
3284    else
3285        LogFile "-------------"
3286        LogFile "INFO: $gcf content"
3287        LogFile "-------------"
3288        cat $gcf >> $LOGFILE
3289        LogFile "-------------"
3290    fi
3291fi
3292
3293LogFile "Full fdisk info"
3294LogFile "---------------"
3295$FDISK -l >> $LOGFILE
3296LogFile "----------------"
3297
3298# Compute libata version
3299laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3300# If libata v2 is used then remove ide-generic as it will perturbate boot
3301if [ "`echo $MODULES | grep libata`" ]; then
3302    if [ "$laver" = "2" ]; then
3303        DENY_MODS="$DENY_MODS ide-generic"
3304        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3305        LogFile "-------------"
3306    fi
3307fi
3308
3309# Check for McAfee which disturbs the access to some files (tgz in articular)
3310if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3311    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3312    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3313    LogFile "WARNING: You have two options:"
3314    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3315    LogFile "WARNING:  - Disable the scanner during the backup"
3316fi
3317
3318#
3319# If we have a USB device we need to store info
3320# and remove it from the parameters line
3321#
3322if [ "$#" -ne "0" ] ; then
3323    if [ "$1" = "--usb" ] ; then
3324        shift
3325        USBDEVICE=$1
3326        if [ _"$USBDEVICE" = _"" ]; then
3327            Die "No USB device specified"
3328        fi
3329        shift
3330    fi
3331fi
3332
3333if [ "$#" -ne "0" ] ; then
3334    if [ "$1" = "--findkernel" ] ; then
3335        resk=`TryToFindKernelPath`
3336        # Avoids logfile content for mondo
3337        export MONDO_SHARE=""
3338        if [ "$resk" = "" ] ; then
3339            if [ $KERNEL_IS_XEN = "yes" ]; then
3340                echo "$xenkernelpath"
3341                LogFile "INFO: xenkernelpath = $xenkernelpath"
3342                MindiExit 0
3343            else
3344                MindiExit -1
3345            fi
3346        else
3347            echo "$resk"
3348            LogFile "INFO: kernelpath = $resk"
3349            MindiExit 0
3350        fi
3351    elif [ "$1" = "--locatedeps" ] ; then
3352        [ ! "$2" ] && Die "Please specify the binary to look at"
3353        LocateDeps $*
3354        # Avoids logfile content for mondo
3355        export MONDO_SHARE=""
3356        MindiExit $?
3357    elif [ "$1" = "--readalllink" ] ; then
3358        [ ! "$2" ] && Die "Please specify the binary to look at"
3359        # Avoids logfile content for mondo
3360        export MONDO_SHARE=""
3361        mr-read-all-link $2
3362        MindiExit $?
3363    elif [ "$1" = "--makebcf" ] ; then
3364        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3365        MakeBootConfFile $2
3366        MindiExit 0
3367    elif [ "$1" = "--makemessage" ] ; then
3368        MakeMessageFile | cut -c1-80
3369        MindiExit 0
3370    elif [ "$1" = "--makemountlist" ] ; then
3371        [ ! "$2" ] && Die "Please specify the output file"
3372        MakeMountlist $2
3373        CheckMountlist $2
3374        # Avoids logfile content for mondo
3375        export MONDO_SHARE=""
3376        MindiExit $?
3377    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3378        echo "Mindi v$MINDI_VERSION"
3379        # Avoids logfile content for mondo
3380        export MONDO_SHARE=""
3381        MindiExit 0
3382    elif [ "$1" = "--ironic" ] ; then
3383        [ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
3384        [ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
3385        [ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
3386        #TODO: See how we can influence the boot loader
3387        [ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
3388        if [ "$5" ]; then
3389            boottype=$5
3390        fi
3391        [ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
3392        if [ "$6" ]; then
3393            bootbin=$6
3394        fi
3395        kernelpath=$2
3396        BOOT_TYPE=$4
3397        # Ironic requires some specific boot parameters
3398        MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
3399        MINDI_BOOT_TIMEOUT=10
3400        EXTRA_SPACE=1500000
3401        # Get the local improvements to the configuration
3402        if [ -f $MINDI_CONFIG ]; then
3403            . $MINDI_CONFIG
3404        fi
3405        PrepareBootDir
3406        PrepareBigDirTar
3407        CleanBigDir
3408        cp $3 $MINDI_TMP/initrd.img
3409        MakeBootableDevice ISO
3410        MindiExit 0
3411    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3412        MONDO_TMP=$2
3413        # Change MINDI_TMP for the one provided by mondo
3414        # So that it can get back the built files
3415        if [ _"$MONDO_TMP" = _"" ]; then
3416            Die "MONDO_TMP is empty, aborting"
3417        fi
3418        if [ _"$MONDO_TMP" = _"/" ]; then
3419            Die "MONDO_TMP is /, aborting"
3420        fi
3421        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3422        rmdir $MINDI_TMP
3423        export MINDI_TMP=$MONDO_TMP
3424        mkdir -p $MINDI_TMP
3425
3426        # This is the scratch dir in mondo - subdir images
3427        MINDI_CACHE=$3
3428        LogFile "MINDI_CACHE = $MINDI_CACHE"
3429
3430        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3431        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3432       
3433###
3434### Sq-Modification...
3435### Attempt to locate kernel specific module path
3436### if module path is found then use it other wise use uname -r to set it...
3437###
3438        if [ $KERNEL_IS_XEN = "yes" ]; then
3439            LogAll "INFO: xenkernelpath = $xenkernelpath"
3440        fi
3441        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3442        if [ ! -d "/lib/modules/$kernelname" ]; then
3443           LogAll "WARNING: Module path for ${kernelpath} not found..."
3444           LogAll "         using running kernel\'s modules."
3445           kernelname=$KERVERRUN
3446        else
3447           LogAll "INFO: Using modules for kernel: ${kernelname}"
3448        fi
3449        LogAll "INFO: kernelname = $kernelname"
3450        LogAll "INFO: kernelpath = $kernelpath"
3451###
3452### end of Sq-Modification
3453###
3454        TAPEDEV=$5
3455        TAPESIZE=$6
3456        FILES_IN_FILELIST=$7
3457        USE_LZO=$8
3458        CDRECOVERY=$9
3459        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3460            IMAGE_DEVS=""
3461        else
3462            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3463        fi
3464        if [ "${11}" ] ; then
3465            LILO_OPTIONS=""
3466    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3467        fi
3468        LAST_FILELIST_NUMBER=${12}
3469        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3470        export MINDI_EXCLUDE_DEVS="${14}"
3471        USE_COMP="${15}"
3472        USE_LILO="${16}"
3473        USE_STAR="${17}"
3474        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3475        DIFFERENTIAL="${19}"
3476        USE_GZIP="${20}"
3477        USE_LZMA="${21}"
3478        NOT_BOOT="${22}"
3479        BOOT_TYPE="${23}"
3480        [ "$USE_COMP" = "" ] && USE_COMP=yes
3481        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3482        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3483        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3484        [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3485        # MONDO_ROOT is the real scratchdir
3486        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3487        if [ _"$MONDO_ROOT" != _"" ]; then
3488            mkdir -p $MONDO_ROOT
3489        else
3490            Die "MONDO_ROOT is undefined"
3491        fi
3492    else
3493        LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
3494        LogScreen "        mindi --ironic kernel initrd [BIOS|UEFI] [syslinux|grub|grub2] [/path/to/bootloader]"
3495        LogScreen "        mindi --locatedeps file"
3496        LogScreen "        mindi --makemessage"
3497        LogScreen "        mindi --findkernel"
3498        LogScreen "        mindi --makemountlist file"
3499        LogScreen "        mindi --makebcf bootloader"
3500        LogScreen "        mindi -V"
3501        MindiExit -1
3502    fi
3503fi
3504
3505if [ _"$MINDI_CACHE" != _"" ]; then
3506    rm -rf $MINDI_CACHE/* 2> /dev/null
3507    mkdir -p $MINDI_CACHE
3508fi
3509
3510[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3511
3512if [ _"$MONDO_SHARE" = _"" ]; then
3513    LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3514    LogAll "Latest Mindi is available from http://www.mondorescue.org"
3515    LogAll "BusyBox sources are available from http://www.busybox.net"
3516    LogAll "------------------------------------------------------------------------------"
3517else
3518    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3519fi
3520if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3521    LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3522else
3523    LogAll "ERROR: Unable to find mindi-busybox, please install it"
3524    MindiExit -1
3525fi
3526
3527for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3528    modinfo $i 2> /dev/null 1> /dev/null
3529    if [ $? -eq 0 ]; then
3530        modprobe $i 2>&1 > /dev/null
3531    fi
3532done
3533
3534LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3535LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3536LogFile "NOT_BOOT = '$NOT_BOOT'"
3537if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3538    LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3539    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3540    MakeMountlist $MINDI_TMP/mountlist.txt
3541    CheckMountlist $MINDI_TMP/mountlist.txt
3542    mkdir -p $MINDI_TMP/small-all/tmp
3543    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3544    (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3545    sleep 2
3546    LogAll "Done. Exiting."
3547    MindiExit 0
3548fi
3549
3550if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3551    LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3552fi
3553
3554if [ "$kernelpath" = "" ] ; then
3555    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3556    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3557    read ch
3558    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3559        USE_OWN_KERNEL="yes"
3560    else
3561        USE_OWN_KERNEL="no"
3562    fi
3563    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3564        kernelpath=`TryToFindKernelPath`
3565        if [ "$kernelpath" = "" ] ; then
3566            echo -n "Please enter kernel path : "
3567            read kernelpath
3568        fi
3569    fi
3570fi
3571
3572echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3573[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3574
3575PrepareBigDir
3576bigdir_size=`du -sk $bigdir | cut -f1`
3577LogFile "---------------------------"
3578LogFile "INFO: bigdir size is $bigdir_size KB"
3579
3580PrepareTargetDir || Die "Could not create initrd.img in target dir"
3581targetdir_size=`du -sk $targetdir | cut -f1`
3582LogFile "---------------------------"
3583LogFile "INFO: targetdir size is $targetdir_size KB"
3584LogFile "---------------------------- "
3585
3586# Now we can compute it correctly with some extra in case of...
3587export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
3588# And now we can patch the value in conf files
3589PatchBootFiles
3590# And tar them
3591PrepareBigDirTar
3592# And prepare boot setup
3593MakeBootInitFile
3594# Now cleans up stuff
3595CleanBigDir
3596CleanTargetDir
3597
3598[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3599...Or type 'memtest' to test your machine's RAM thoroughly.\n"
3600
3601if [ _"$MONDO_SHARE" = _"" ]; then
3602    OfferToMakeBootableISO
3603    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3604        OfferToMakeBootableUSB
3605    fi
3606    LogAll "INFO: Mindi Finished"
3607elif [ "$TAPEDEV" ] ; then
3608    if [ "$ARCH" != "ia64" ] ; then
3609        # We need to keep the img file as boot file for ia64 platform
3610        rm -f $MINDI_CACHE/{*img,*iso}
3611    else
3612        rm -f $MINDI_CACHE/*iso
3613    fi
3614    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3615        OfferToMakeBootableUSB
3616    fi
3617    OfferToMakeBootableISO
3618    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3619        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3620    else
3621        Die "Cannot find all.tar.gz, to be written to tape"
3622    fi
3623elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3624    OfferToMakeBootableUSB
3625else
3626    OfferToMakeBootableISO
3627fi
3628
3629if [ -f $MINDI_TMP/$MRCFG ]; then
3630    LogFile "INFO: Your $MRCFG file is:"
3631    LogFile "--------------------------"
3632    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3633    LogFile "--------------------------"
3634else
3635    if [ _"$MONDO_SHARE" != _"" ] ; then
3636        LogAll "ERROR: You don't have a $MRCFG file !"
3637    fi
3638fi
3639# cleanup
3640MindiExit 0
Note: See TracBrowser for help on using the repository browser.