| 1 | #!/bin/bash
|
|---|
| 2 |
|
|---|
| 3 | # $Id: mindi 3693 2017-10-11 22:57:22Z bruno $
|
|---|
| 4 | #
|
|---|
| 5 | #-----------------------------------------------------------------------------
|
|---|
| 6 | # mindi - mini-Linux distro based on the user's filesystem & distribution
|
|---|
| 7 | #
|
|---|
| 8 | # Mindi can create a multi-image boot/root kit. The first image is the boot
|
|---|
| 9 | # disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
|
|---|
| 10 | # the third disk is data disk #2; and so it goes.
|
|---|
| 11 | #
|
|---|
| 12 | # See http://www.mondorescue.org for details.
|
|---|
| 13 | #-----------------------------------------------------------------------------
|
|---|
| 14 |
|
|---|
| 15 | ### Which arch are we on (useful for ia64 port)
|
|---|
| 16 | ARCH=`/bin/uname -m`
|
|---|
| 17 | KERVERRUN=`/bin/uname -r`
|
|---|
| 18 | # By default we use the running kernel as a reference
|
|---|
| 19 | KERVER=$KERVERRUN
|
|---|
| 20 |
|
|---|
| 21 | # In case of problem with udev you can try to add udevdebug
|
|---|
| 22 | MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
|
|---|
| 23 | MINDI_DEFAULT_BOOT_OPTION="interactive"
|
|---|
| 24 | # For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
|
|---|
| 25 | # So this parameter only applies to non CD recovery.
|
|---|
| 26 | MINDI_BOOT_TIMEOUT="300"
|
|---|
| 27 |
|
|---|
| 28 | MINDI_REV=PBREV
|
|---|
| 29 | MINDI_VER=PBVER
|
|---|
| 30 |
|
|---|
| 31 | MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
|
|---|
| 32 | MINDI_PREFIX=XXX
|
|---|
| 33 | MINDI_CONF=YYY
|
|---|
| 34 | MINDI_SBIN=${MINDI_PREFIX}/sbin
|
|---|
| 35 | MINDI_LIB=LLL
|
|---|
| 36 | MINDI_CACHE=/var/cache/mindi
|
|---|
| 37 |
|
|---|
| 38 | MRCFG=mondorestore.cfg
|
|---|
| 39 |
|
|---|
| 40 | # Temporary directory for mindi
|
|---|
| 41 | TMPDIR=${TMPDIR:=/tmp}
|
|---|
| 42 | if [ ! -d $TMPDIR ]; then
|
|---|
| 43 | mkdir -p $TMPDIR
|
|---|
| 44 | fi
|
|---|
| 45 |
|
|---|
| 46 | EXTRA_SPACE=20000 # increase if you run out of ramdisk space - Default 20 MB
|
|---|
| 47 |
|
|---|
| 48 | PROMPT_MAKE_CD_IMAGE="yes"
|
|---|
| 49 | # Ask if you want to make a CD Image to be written?
|
|---|
| 50 | # if this is set to 'no' in the conf file, then the image will be created automatically
|
|---|
| 51 |
|
|---|
| 52 | PROMPT_MAKE_USB_IMAGE="yes"
|
|---|
| 53 | # Ask if you want to make a USB Image to be written?
|
|---|
| 54 | # if this is set to 'no' in the conf file, then the image will be created automatically
|
|---|
| 55 |
|
|---|
| 56 | USE_OWN_KERNEL="yes"
|
|---|
| 57 | # If set to "no", you will be prompted for whether or not
|
|---|
| 58 | # you want to use your own kernel, or the supplied default.
|
|---|
| 59 | # If "yes" mindi will automatically use your own kernel.
|
|---|
| 60 |
|
|---|
| 61 | KERNEL_IS_XEN="no"
|
|---|
| 62 | # If set to "no", the kernel is not a Xen kernel
|
|---|
| 63 | # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
|
|---|
| 64 | xenkernelpath=""
|
|---|
| 65 |
|
|---|
| 66 | MY_FSTAB=/etc/fstab
|
|---|
| 67 | TAPE_MODS="ht st osst ide-tape ide_tape"
|
|---|
| 68 | SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
|
|---|
| 69 |
|
|---|
| 70 | # ide-probe-mod
|
|---|
| 71 | IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
|
|---|
| 72 | PCMCIA_MODS="pcmcia_core ds yenta_socket"
|
|---|
| 73 | USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
|
|---|
| 74 | NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
|
|---|
| 75 | CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
|
|---|
| 76 | # Replace with that line for HP OCMP e.g.
|
|---|
| 77 | #DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
|
|---|
| 78 | DENY_MODS="kqemu vxfen"
|
|---|
| 79 | # Force some modules to be included
|
|---|
| 80 | FORCE_MODS=""
|
|---|
| 81 |
|
|---|
| 82 | LOGFILE=/var/log/mindi.log
|
|---|
| 83 | BOOT_MEDIA_MESSAGE="\
|
|---|
| 84 | To format and restore all files automatically, type '0enuke07' <enter>.\n\
|
|---|
| 85 | To restore some/all files interactively, type '0einteractive07' <enter>.\n\
|
|---|
| 86 | To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
|
|---|
| 87 | To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
|
|---|
| 88 | \n\
|
|---|
| 89 | You may add one or more parameters as well as per the function keys below\n\
|
|---|
| 90 | e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
|
|---|
| 91 | \n\
|
|---|
| 92 | If restoring from a local external disk or USB key, do not connect it \n\
|
|---|
| 93 | until the boot-up has finished.\n\
|
|---|
| 94 | \n\
|
|---|
| 95 | \n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
|
|---|
| 96 | "
|
|---|
| 97 | FDISK=$MINDI_SBIN/mr-parted2fdisk
|
|---|
| 98 |
|
|---|
| 99 | # Using a config file allow to overwrite some values
|
|---|
| 100 | MINDI_CONFIG="$MINDI_CONF/mindi.conf"
|
|---|
| 101 | if [ -f $MINDI_CONFIG ]; then
|
|---|
| 102 | . $MINDI_CONFIG
|
|---|
| 103 | fi
|
|---|
| 104 | DEPLIST_FILE="$MINDI_CONF/deplist.txt"
|
|---|
| 105 | DEPLIST_DIR="$MINDI_CONF/deplist.d"
|
|---|
| 106 |
|
|---|
| 107 | # Debian 8 system e.g. use xorriso for UEFI support.
|
|---|
| 108 | # However, they use exactly the same command line parameters as mkisofs, so just
|
|---|
| 109 | # use it if it's available.
|
|---|
| 110 | ISO_CMD="/usr/bin/xorriso"
|
|---|
| 111 |
|
|---|
| 112 | # Mandriva system e.g. use cdrkit, which uses genisoimage.
|
|---|
| 113 | # However, they use exactly the same command line parameters as mkisofs, so just
|
|---|
| 114 | # use it if it's available.
|
|---|
| 115 | if [ ! -x $ISO_CMD ]; then
|
|---|
| 116 | ISO_CMD="/usr/bin/genisoimage"
|
|---|
| 117 | # For compatibility with previous versions default to mkisofs
|
|---|
| 118 | if [ ! -x $ISO_CMD ]; then
|
|---|
| 119 | ISO_CMD="/usr/bin/mkisofs"
|
|---|
| 120 | fi
|
|---|
| 121 | if [ ! -x $ISO_CMD ]; then
|
|---|
| 122 | LogFile "NOTE: No CD image (ISO file) utility found"
|
|---|
| 123 | ISO_CMD = ""
|
|---|
| 124 | fi
|
|---|
| 125 | else
|
|---|
| 126 | ISO_CMD="/usr/bin/xorriso -as mkisofs"
|
|---|
| 127 | fi
|
|---|
| 128 |
|
|---|
| 129 | ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
|
|---|
| 130 |
|
|---|
| 131 | # Mindi set this as default in case it's invoked alone
|
|---|
| 132 | BOOT_TYPE="BIOS"
|
|---|
| 133 | # and we also check whether we're UEFI or not.
|
|---|
| 134 | if [ -d "/sys/firmware/efi" ]; then
|
|---|
| 135 | BOOT_TYPE="UEFI"
|
|---|
| 136 | else
|
|---|
| 137 | # Find MBR in case of bootable USB device to build
|
|---|
| 138 | MBRFILE=/usr/lib/syslinux/mbr.bin
|
|---|
| 139 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
|
|---|
| 140 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
|
|---|
| 141 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
|
|---|
| 142 | [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
|
|---|
| 143 | fi
|
|---|
| 144 |
|
|---|
| 145 | # Function to log on screen only
|
|---|
| 146 | LogScreen() {
|
|---|
| 147 | if [ -e /dev/stderr ] ; then
|
|---|
| 148 | echo -e "$1" >> /dev/stderr
|
|---|
| 149 | elif [ -e /usr/bin/logger ] ; then
|
|---|
| 150 | /usr/bin/logger -s $1
|
|---|
| 151 | fi
|
|---|
| 152 | }
|
|---|
| 153 |
|
|---|
| 154 | # Function to log in log file only
|
|---|
| 155 | LogFile() {
|
|---|
| 156 |
|
|---|
| 157 | echo -e "$1" >> $LOGFILE
|
|---|
| 158 | if [ _"$2" != _"" ]; then
|
|---|
| 159 | grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
|
|---|
| 160 | rm -f "$2"
|
|---|
| 161 | fi
|
|---|
| 162 | }
|
|---|
| 163 |
|
|---|
| 164 | # Function to log in both screen and logfile
|
|---|
| 165 | LogAll() {
|
|---|
| 166 | LogScreen "$1"
|
|---|
| 167 | LogFile "$1" "$2"
|
|---|
| 168 | }
|
|---|
| 169 |
|
|---|
| 170 | # Last function called before exiting
|
|---|
| 171 | # Parameter is exit code value
|
|---|
| 172 | # Should be declared here as used immediately below potentialy
|
|---|
| 173 | MindiExit() {
|
|---|
| 174 | LogFile "INFO: Mindi $MINDI_VERSION is exiting"
|
|---|
| 175 | LogFile "INFO: End date : `date`"
|
|---|
| 176 | if [ _"$MONDO_SHARE" != _"" ] ; then
|
|---|
| 177 | echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
|
|---|
| 178 | if [ -f $LOGFILE ]; then
|
|---|
| 179 | cat $LOGFILE >> /var/log/mondoarchive.log
|
|---|
| 180 | else
|
|---|
| 181 | echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
|
|---|
| 182 | fi
|
|---|
| 183 | echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
|
|---|
| 184 | fi
|
|---|
| 185 |
|
|---|
| 186 | cd /
|
|---|
| 187 | sync&
|
|---|
| 188 |
|
|---|
| 189 | # Clean temporary files only when standalone mindi
|
|---|
| 190 | if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
|
|---|
| 191 | rm -Rf $MINDI_TMP
|
|---|
| 192 | fi
|
|---|
| 193 | exit $1
|
|---|
| 194 | }
|
|---|
| 195 |
|
|---|
| 196 | Die() {
|
|---|
| 197 | if [ "$1" = "" ] ; then
|
|---|
| 198 | LogAll "FATAL ERROR"
|
|---|
| 199 | else
|
|---|
| 200 | LogAll "FATAL ERROR. $1"
|
|---|
| 201 | fi
|
|---|
| 202 | if [ _"$2" != _"" ]; then
|
|---|
| 203 | grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
|
|---|
| 204 | fi
|
|---|
| 205 | rm -f "$2"
|
|---|
| 206 |
|
|---|
| 207 | LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
|
|---|
| 208 | LogAll "See http://www.mondorescue.org for more information."
|
|---|
| 209 | LogAll "WE CANNOT HELP unless you enclose that file.\n"
|
|---|
| 210 | MindiExit -1
|
|---|
| 211 | }
|
|---|
| 212 |
|
|---|
| 213 | # Now we can create what we need
|
|---|
| 214 | MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
|
|---|
| 215 | if [ $? -ne 0 ]; then
|
|---|
| 216 | df $TMPDIR
|
|---|
| 217 | Die "Unable to create a temporary directory ! Check space on $TMPDIR"
|
|---|
| 218 | fi
|
|---|
| 219 | if [ _"$MINDI_TMP" = _"" ]; then
|
|---|
| 220 | Die "MINDI_TMP is empty, aborting"
|
|---|
| 221 | fi
|
|---|
| 222 | if [ _"$MINDI_TMP" = _"/" ]; then
|
|---|
| 223 | Die "MINDI_TMP is /, aborting"
|
|---|
| 224 | fi
|
|---|
| 225 | export MINDI_TMP
|
|---|
| 226 |
|
|---|
| 227 | # ----------------------------------------------------------------------------
|
|---|
| 228 |
|
|---|
| 229 |
|
|---|
| 230 | AbortHere() {
|
|---|
| 231 | Die "Program is terminating in response to signal received from OS/user"
|
|---|
| 232 | }
|
|---|
| 233 |
|
|---|
| 234 |
|
|---|
| 235 | Aborted() {
|
|---|
| 236 | trap SIGHUP SIGTERM SIGTRAP SIGINT
|
|---|
| 237 | [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
|
|---|
| 238 | Die "User abort."
|
|---|
| 239 | }
|
|---|
| 240 |
|
|---|
| 241 |
|
|---|
| 242 | AddFileToCfgIfExists() {
|
|---|
| 243 | [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
|
|---|
| 244 | }
|
|---|
| 245 |
|
|---|
| 246 |
|
|---|
| 247 | AddKeyboardMappingFile() {
|
|---|
| 248 | local mappath r included_list included_item i res ii sss
|
|---|
| 249 | mappath=$1
|
|---|
| 250 | KBDEPTH=$(($KBDEPTH+1))
|
|---|
| 251 | [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
|
|---|
| 252 | if [ -e "$bigdir/$mappath" ] ; then
|
|---|
| 253 | LogFile "INFO: $mappath already added"
|
|---|
| 254 | return
|
|---|
| 255 | elif [ -d "$bigdir/$mappath" ] ; then
|
|---|
| 256 | echo "Cannot add $mappath: it's a directory. Sorry."
|
|---|
| 257 | return
|
|---|
| 258 | fi
|
|---|
| 259 | LogFile "INFO: Added kbd map $mappath"
|
|---|
| 260 | if [ ! -e "$mappath" ] ; then
|
|---|
| 261 | mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
|
|---|
| 262 | if [ ! -e "$mappath" ] ; then
|
|---|
| 263 | LogAll "WARNING: Cannot add $mappath: kbd map file not found"
|
|---|
| 264 | return
|
|---|
| 265 | fi
|
|---|
| 266 | fi
|
|---|
| 267 |
|
|---|
| 268 | tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
|
|---|
| 269 | if [ "`echo $mappath | grep -F ".gz"`" ] ; then
|
|---|
| 270 | included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
|
|---|
| 271 | else
|
|---|
| 272 | included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
|
|---|
| 273 | fi
|
|---|
| 274 | for included_item in $included_list ; do
|
|---|
| 275 | if [ ! -e "$included_item" ] ; then
|
|---|
| 276 | sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
|
|---|
| 277 | [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
|
|---|
| 278 | for ii in $sss ; do
|
|---|
| 279 | [ -e "$ii" ] && AddKeyboardMappingFile $ii
|
|---|
| 280 | done
|
|---|
| 281 | else
|
|---|
| 282 | AddKeyboardMappingFile $included_item
|
|---|
| 283 | fi
|
|---|
| 284 | done
|
|---|
| 285 | }
|
|---|
| 286 |
|
|---|
| 287 |
|
|---|
| 288 | CopyDependenciesToDirectory() {
|
|---|
| 289 | local outdir incoming counter d found tdir templog
|
|---|
| 290 | outdir=$1
|
|---|
| 291 | templog=$MINDI_TMP/$$.log
|
|---|
| 292 | mkdir -p $outdir
|
|---|
| 293 | incoming=`ReadLine`
|
|---|
| 294 | counter=$3
|
|---|
| 295 | > $templog
|
|---|
| 296 |
|
|---|
| 297 | while [ "$incoming" != "" ] ; do
|
|---|
| 298 | if [ "$3" = "1" ]; then
|
|---|
| 299 | counter=$(($counter+1))
|
|---|
| 300 | LogProgress $counter $2
|
|---|
| 301 | fi
|
|---|
| 302 | # Non absolute file names should not arrive till here => skipped
|
|---|
| 303 | if [ `echo "$incoming" | cut -c1` != '/' ]; then
|
|---|
| 304 | LogAll "WARNING: Unable to handle $incoming"
|
|---|
| 305 | incoming=`ReadLine`
|
|---|
| 306 | continue
|
|---|
| 307 | fi
|
|---|
| 308 | # no parent directory of incoming should be a link, copy is not possible in that case
|
|---|
| 309 | d=`dirname "$incoming"`
|
|---|
| 310 | found="false"
|
|---|
| 311 | while [ $d != "/" -a $found = "false" ]; do
|
|---|
| 312 | [ -h "$d" ] && found="true"
|
|---|
| 313 | d=`dirname "$d"`
|
|---|
| 314 | done
|
|---|
| 315 | if [ -d "$incoming" -a ! -h "$incoming" ]; then
|
|---|
| 316 | find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
|
|---|
| 317 | elif [ -e "$incoming" ] && [ $found = "false" ]; then
|
|---|
| 318 | if [ ! -h "$incoming" ]; then
|
|---|
| 319 | tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
|
|---|
| 320 | else
|
|---|
| 321 | tdir=`dirname "$incoming"`
|
|---|
| 322 | if [ ! -e "$outdir/$tdir" ]; then
|
|---|
| 323 | mkdir -p "$outdir/$tdir"
|
|---|
| 324 | fi
|
|---|
| 325 | cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
|
|---|
| 326 | fi
|
|---|
| 327 | # Only uncompress modules if not using udevd
|
|---|
| 328 | if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
|
|---|
| 329 | gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
|
|---|
| 330 | fi
|
|---|
| 331 | [ -x "$outdir" ] && StripExecutable $outdir
|
|---|
| 332 | fi
|
|---|
| 333 | incoming=`ReadLine`
|
|---|
| 334 | done
|
|---|
| 335 | }
|
|---|
| 336 |
|
|---|
| 337 |
|
|---|
| 338 | CountItemsIn() {
|
|---|
| 339 | local r
|
|---|
| 340 | r=0
|
|---|
| 341 | for q in $1 ; do
|
|---|
| 342 | r=$(($r+1))
|
|---|
| 343 | done
|
|---|
| 344 | echo $r
|
|---|
| 345 | }
|
|---|
| 346 |
|
|---|
| 347 |
|
|---|
| 348 | DropOptimizedLibraries() {
|
|---|
| 349 | local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
|
|---|
| 350 | filelist=$1
|
|---|
| 351 | outdir=$2
|
|---|
| 352 |
|
|---|
| 353 | list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
|
|---|
| 354 | if [ "$list_of_optimized_libraries" = "" ] ; then
|
|---|
| 355 | return 0
|
|---|
| 356 | fi
|
|---|
| 357 | echo -en "Dropping i686-optimized libraries if appropriate"
|
|---|
| 358 | for optimized_lib_name in $list_of_optimized_libraries ; do
|
|---|
| 359 | echo -en "."
|
|---|
| 360 | reason=""
|
|---|
| 361 | vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
|
|---|
| 362 | echo "$vanilla_lib_name" >> $filelist
|
|---|
| 363 | LogFile "INFO: Adding $vanilla_lib_name to filelist"
|
|---|
| 364 | mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
|
|---|
| 365 | rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
|
|---|
| 366 |
|
|---|
| 367 | # This may return multiple files
|
|---|
| 368 | for resolved in `mr-read-all-link $vanilla_lib_name`; do
|
|---|
| 369 | LogFile "INFO: Adding as deps $resolved to filelist"
|
|---|
| 370 | vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
|
|---|
| 371 | if [ "$vanilla_resolved_name" != "$resolved" ]; then
|
|---|
| 372 | mkdir -p $outdir$resolved> /dev/null 2> /dev/null
|
|---|
| 373 | rmdir $outdir$resolved > /dev/null 2> /dev/null
|
|---|
| 374 | ln -sf $vanilla_resolved_name $outdir$resolved
|
|---|
| 375 | LogFile "INFO: Excluding deps $resolved"
|
|---|
| 376 | grep -Fvx "$resolved" "$filelist" > $filelist.tmp
|
|---|
| 377 | LogFile "INFO: Replacing it with $vanilla_resolved_name"
|
|---|
| 378 | echo "$vanilla_resolved_name" >> $filelist.tmp
|
|---|
| 379 | mv -f $filelist.tmp $filelist
|
|---|
| 380 | fi
|
|---|
| 381 | done
|
|---|
| 382 | done
|
|---|
| 383 | $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
|
|---|
| 384 | mv -f $filelist.tmp $filelist
|
|---|
| 385 | echo -e "$DONE"
|
|---|
| 386 | }
|
|---|
| 387 |
|
|---|
| 388 |
|
|---|
| 389 | FindAndAddUserKeyboardMappingFile() {
|
|---|
| 390 | local r res mapfile mappath included_item included_list keyfile mp locale
|
|---|
| 391 | LogAll "INFO: Analyzing your keyboard's configuration."
|
|---|
| 392 | KEYDIR=/usr/lib/kbd
|
|---|
| 393 | [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
|
|---|
| 394 | [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
|
|---|
| 395 | [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
|
|---|
| 396 | [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
|
|---|
| 397 | if [ ! -e "$KEYDIR" ] ; then
|
|---|
| 398 | LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
|
|---|
| 399 | return 0
|
|---|
| 400 | else
|
|---|
| 401 | LogFile "INFO: KEYDIR=$KEYDIR"
|
|---|
| 402 | fi
|
|---|
| 403 | if [ -e "/etc/sysconfig/keyboard" ] ; then
|
|---|
| 404 | LogFile "INFO: Red Hat-style config detected."
|
|---|
| 405 | keyfile=/etc/sysconfig/keyboard
|
|---|
| 406 | elif [ -e "/etc/vconsole.conf" ] ; then
|
|---|
| 407 | LogFile "INFO: New Fedora style config detected."
|
|---|
| 408 | keyfile=/etc/vconsole.conf
|
|---|
| 409 | elif [ -e "/etc/rc.d/rc.keymap" ] ; then
|
|---|
| 410 | LogFile "INFO: Slackware-style config detected."
|
|---|
| 411 | keyfile=/etc/rc.d/rc.keymap
|
|---|
| 412 | elif [ -e "/etc/rc.config" ] ; then
|
|---|
| 413 | LogFile "INFO: Debian-style config detected."
|
|---|
| 414 | keyfile=/etc/rc.config
|
|---|
| 415 | elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
|
|---|
| 416 | LogFile "INFO: Debian-style config detected."
|
|---|
| 417 | mkdir -p $bigdir/tmp
|
|---|
| 418 | echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
|
|---|
| 419 | KBDEPTH=0
|
|---|
| 420 | mkdir -p $bigdir/etc/console
|
|---|
| 421 | cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
|
|---|
| 422 | echo ""
|
|---|
| 423 | echo -e "$DONE"
|
|---|
| 424 | return 0
|
|---|
| 425 | elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
|
|---|
| 426 | LogFile "INFO: Ubuntu-style config detected."
|
|---|
| 427 | mkdir -p $bigdir/tmp
|
|---|
| 428 | if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
|
|---|
| 429 | kbdfile="/etc/console-setup/boottime.kmap.gz"
|
|---|
| 430 | else
|
|---|
| 431 | kbdfile="/etc/console-setup/cached.kmap.gz"
|
|---|
| 432 | fi
|
|---|
| 433 | echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
|
|---|
| 434 | KBDEPTH=0
|
|---|
| 435 | mkdir -p $bigdir/etc/console-setup
|
|---|
| 436 | cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
|
|---|
| 437 | echo ""
|
|---|
| 438 | echo -e "$DONE"
|
|---|
| 439 | return 0
|
|---|
| 440 | elif [ -e "/etc/default/keyboard" ]; then
|
|---|
| 441 | LogFile "INFO: New Debian-style config detected."
|
|---|
| 442 | keyfile=/etc/default/keyboard
|
|---|
| 443 | elif [ -e "/etc/rc.conf" ] ; then
|
|---|
| 444 | LogFile "INFO: ArchLinux config detected."
|
|---|
| 445 | keyfile=/etc/rc.conf
|
|---|
| 446 | elif [ -e "/etc/conf.d/keymaps" ] ; then
|
|---|
| 447 | LogFile "INFO: Gentoo-style config detected."
|
|---|
| 448 | keyfile=/etc/conf.d/keymaps
|
|---|
| 449 | elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
|
|---|
| 450 | LogFile "INFO: X11-style config detected."
|
|---|
| 451 | keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
|
|---|
| 452 | else
|
|---|
| 453 | LogFile "Searching for rc.config ..."
|
|---|
| 454 | keyfile=`find /etc -name rc.config | head -n1`
|
|---|
| 455 | if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
|
|---|
| 456 | LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
|
|---|
| 457 | return
|
|---|
| 458 | else
|
|---|
| 459 | LogFile "INFO: Found $keyfile"
|
|---|
| 460 | fi
|
|---|
| 461 | fi
|
|---|
| 462 | if [ ! -e "$KEYDIR/keymaps" ] ; then
|
|---|
| 463 | LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
|
|---|
| 464 | return
|
|---|
| 465 | fi
|
|---|
| 466 | LogFile "INFO: keyfile=$keyfile"
|
|---|
| 467 | # For SLES we need to remove the .map.gz extension Cf #614
|
|---|
| 468 | locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
|
|---|
| 469 | [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'` # Slackware
|
|---|
| 470 | [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
|
|---|
| 471 | [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'` # Fedora 19
|
|---|
| 472 | [ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" | grep -v '^#' | cut -d= -f2 | tr -d '"'` # New Debian 8+
|
|---|
| 473 | LogFile "INFO: locale=$locale"
|
|---|
| 474 | #
|
|---|
| 475 | # Process the keymaps dir once for all
|
|---|
| 476 | # AddKeyboardMappingFile will use it recursively
|
|---|
| 477 | #
|
|---|
| 478 | find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
|
|---|
| 479 | mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
|
|---|
| 480 | [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
|
|---|
| 481 | # For new distro such as RHEL 7 we need that additional search
|
|---|
| 482 | [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
|
|---|
| 483 | # If we have multiple keymaps then log it !!
|
|---|
| 484 | echo "$mp" | grep -q " " >> $LOGFILE
|
|---|
| 485 | if [ $? -eq 0 ]; then
|
|---|
| 486 | LogAll "WARNING: Multiple keymaps found: $mp"
|
|---|
| 487 | LogFile "INFO: The following one will be used"
|
|---|
| 488 | fi
|
|---|
| 489 | for i in $mp ; do
|
|---|
| 490 | mappath=$i
|
|---|
| 491 | [ -e "$i" ] && [ ! -d "$i" ] && break
|
|---|
| 492 | done
|
|---|
| 493 | if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
|
|---|
| 494 | mappath=$(find /usr /lib /lib64 -path "*/kbd/keymaps/*/$locale | head -1")
|
|---|
| 495 | fi
|
|---|
| 496 | LogFile "INFO: mappath = $mappath"
|
|---|
| 497 | if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
|
|---|
| 498 | LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
|
|---|
| 499 | return
|
|---|
| 500 | fi
|
|---|
| 501 | echo -en "INFO: Adding keyboard mapping tables"
|
|---|
| 502 | mkdir -p $bigdir/tmp
|
|---|
| 503 | echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
|
|---|
| 504 | KBDEPTH=0
|
|---|
| 505 | AddKeyboardMappingFile $mappath
|
|---|
| 506 | echo -e "$DONE"
|
|---|
| 507 | rm -f $MINDI_TMP/keymaps.find
|
|---|
| 508 | return 0
|
|---|
| 509 | }
|
|---|
| 510 |
|
|---|
| 511 |
|
|---|
| 512 | FindLdlinux32Binary() {
|
|---|
| 513 | LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
|
|---|
| 514 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
|
|---|
| 515 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
|
|---|
| 516 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
|
|---|
| 517 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
|
|---|
| 518 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
|
|---|
| 519 | [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
|
|---|
| 520 | #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
|
|---|
| 521 | if [ ! -e "$LDLINUXC32" ]; then
|
|---|
| 522 | LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
|
|---|
| 523 | LDLINUXC32=/tmp/idoesnthopefullyexist
|
|---|
| 524 | else
|
|---|
| 525 | LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
|
|---|
| 526 | fi
|
|---|
| 527 | }
|
|---|
| 528 |
|
|---|
| 529 |
|
|---|
| 530 | FindMboot32Binary() {
|
|---|
| 531 | MBOOTC32=/usr/lib/syslinux/mboot.c32
|
|---|
| 532 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
|
|---|
| 533 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
|
|---|
| 534 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
|
|---|
| 535 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
|
|---|
| 536 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
|
|---|
| 537 | [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
|
|---|
| 538 | [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
|
|---|
| 539 | [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
|---|
| 540 | LogFile "INFO: Found mboot.c32 at $MBOOTC32"
|
|---|
| 541 | }
|
|---|
| 542 |
|
|---|
| 543 | FindLdlinuxe64Binary() {
|
|---|
| 544 | LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
|
|---|
| 545 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
|
|---|
| 546 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
|
|---|
| 547 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
|
|---|
| 548 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
|
|---|
| 549 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
|
|---|
| 550 | [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
|
|---|
| 551 | [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
|---|
| 552 | LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
|
|---|
| 553 | }
|
|---|
| 554 |
|
|---|
| 555 | FindSyslinux64EFI() {
|
|---|
| 556 | SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
|
|---|
| 557 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
|
|---|
| 558 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
|
|---|
| 559 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
|
|---|
| 560 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
|
|---|
| 561 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
|
|---|
| 562 | [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
|
|---|
| 563 | [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
|---|
| 564 | LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
|
|---|
| 565 | }
|
|---|
| 566 |
|
|---|
| 567 | FindIsolinuxBinary() {
|
|---|
| 568 | ISOLINUX=/usr/lib/isolinux.bin
|
|---|
| 569 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
|
|---|
| 570 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
|
|---|
| 571 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
|
|---|
| 572 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
|
|---|
| 573 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
|
|---|
| 574 | [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
|
|---|
| 575 | [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
|
|---|
| 576 | [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
|
|---|
| 577 | LogFile "INFO: Found isolinux.bin at $ISOLINUX"
|
|---|
| 578 | }
|
|---|
| 579 |
|
|---|
| 580 |
|
|---|
| 581 | GenerateGiantDependencyList() {
|
|---|
| 582 | local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
|
|---|
| 583 |
|
|---|
| 584 | echo -en "INFO: Analyzing dependency requirements"
|
|---|
| 585 | outfile=$1
|
|---|
| 586 | tempfile=$MINDI_TMP/$$.txt
|
|---|
| 587 | incoming=`ReadLine`
|
|---|
| 588 |
|
|---|
| 589 | > $tempfile
|
|---|
| 590 | progress=0
|
|---|
| 591 | res=0
|
|---|
| 592 | noof_lines=$2
|
|---|
| 593 | while [ "$incoming" != "" ] ; do
|
|---|
| 594 | if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
|
|---|
| 595 | incoming=`ReadLine`
|
|---|
| 596 | continue
|
|---|
| 597 | fi
|
|---|
| 598 | if [ "$incoming" = "LVMFILES:" ] ; then
|
|---|
| 599 | break
|
|---|
| 600 | fi
|
|---|
| 601 | filelist=`GenerateListForFile "$incoming"`
|
|---|
| 602 | r=$?
|
|---|
| 603 | [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
|
|---|
| 604 | res=$(($res+$r))
|
|---|
| 605 | # LogFile "INFO: '$incoming' generates filelist '$filelist'"
|
|---|
| 606 | for fname in $filelist ; do
|
|---|
| 607 | [ "$fname" != "" ] && echo "$fname" >> $tempfile
|
|---|
| 608 | done
|
|---|
| 609 | progress=$(($progress+1))
|
|---|
| 610 | LogProgress $progress $noof_lines
|
|---|
| 611 | incoming=`ReadLine`
|
|---|
| 612 | done
|
|---|
| 613 | if [ "$incoming" = "LVMFILES:" ] ; then
|
|---|
| 614 | incoming=`ReadLine`
|
|---|
| 615 | lvmversion=""
|
|---|
| 616 | while [ "$incoming" != "" ] ; do
|
|---|
| 617 | if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
|
|---|
| 618 | incoming=`ReadLine`
|
|---|
| 619 | continue
|
|---|
| 620 | fi
|
|---|
| 621 | filelist=`GenerateListForFile "$incoming"`
|
|---|
| 622 | for tool in $filelist ; do
|
|---|
| 623 | lvmresolved=`readlink -f $tool`
|
|---|
| 624 | if [ "$tool" = "$lvmresolved" ]; then
|
|---|
| 625 | echo "$tool" >> $tempfile
|
|---|
| 626 | elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
|
|---|
| 627 | if [ "$lvmversion" = "" ] ; then
|
|---|
| 628 | lvmversion=`$lvmresolved`
|
|---|
| 629 | echo "$lvmresolved" >> $tempfile
|
|---|
| 630 | fi
|
|---|
| 631 | toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
|
|---|
| 632 | if [ "$lvmversion" = "200" ]; then
|
|---|
| 633 | # pvdata and lvmcreate_initrd don't exist in LVM2
|
|---|
| 634 | case "$toolstripped" in
|
|---|
| 635 | "pvdata")
|
|---|
| 636 | continue
|
|---|
| 637 | ;;
|
|---|
| 638 | "lvmcreate_initrd")
|
|---|
| 639 | continue
|
|---|
| 640 | ;;
|
|---|
| 641 | esac
|
|---|
| 642 | fi
|
|---|
| 643 | toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
|
|---|
| 644 | if [ -e "$toolpath" ] ; then
|
|---|
| 645 | echo "$toolpath" >> $tempfile
|
|---|
| 646 | echo "$tool" >> $tempfile
|
|---|
| 647 | else
|
|---|
| 648 | toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
|
|---|
| 649 | fi
|
|---|
| 650 | if [ -e "$toolpath" ] ; then
|
|---|
| 651 | echo "$toolpath" >> $tempfile
|
|---|
| 652 | echo "$tool" >> $tempfile
|
|---|
| 653 | else
|
|---|
| 654 | echo "Where are your LVM-Tools? Couldn't find $tool"
|
|---|
| 655 | fi
|
|---|
| 656 | else
|
|---|
| 657 | echo "$tool" >> $tempfile
|
|---|
| 658 | fi
|
|---|
| 659 | done
|
|---|
| 660 | progress=$(($progress+1))
|
|---|
| 661 | LogProgress $progress $noof_lines
|
|---|
| 662 | incoming=`ReadLine`
|
|---|
| 663 | done
|
|---|
| 664 | fi
|
|---|
| 665 | echo -e "$DONE"
|
|---|
| 666 |
|
|---|
| 667 | echo -en "INFO: Making complete dependency list..."
|
|---|
| 668 | tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
|
|---|
| 669 | mv -f $tempfile.new $tempfile
|
|---|
| 670 | > $outfile.pre
|
|---|
| 671 | progress=0
|
|---|
| 672 | noof_lines=`cat $tempfile | wc -l`
|
|---|
| 673 | LogFile "---------------------------------"
|
|---|
| 674 | LogFile "List of dependencies: "
|
|---|
| 675 | LogFile "---------------------------------"
|
|---|
| 676 | for fname in `cat $tempfile` ; do
|
|---|
| 677 | echo "$fname" | tee -a $LOGFILE >> $outfile.pre
|
|---|
| 678 | LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
|
|---|
| 679 | progress=$(($progress+1))
|
|---|
| 680 | LogProgress $progress $noof_lines
|
|---|
| 681 | done
|
|---|
| 682 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 683 | mkdir -p $bigdir/tmp
|
|---|
| 684 | mkdir -p $bigdir/usr/bin
|
|---|
| 685 | if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
|
|---|
| 686 | LogAll "\nINFO: Incorporating post-nuke tarball"
|
|---|
| 687 | (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
|
|---|
| 688 | fi
|
|---|
| 689 | if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
|
|---|
| 690 | LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
|
|---|
| 691 | else
|
|---|
| 692 | LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
|
|---|
| 693 | LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
|
|---|
| 694 | LogAll " If Mindi was called by Mondo then send a bug report."
|
|---|
| 695 | LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
|
|---|
| 696 | LogAll " Finally, run Mindi again."
|
|---|
| 697 | Die "Odd."
|
|---|
| 698 | fi
|
|---|
| 699 | cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
|
|---|
| 700 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
|---|
| 701 | LogAll "\nINFO: Incorporating Network-related settings"
|
|---|
| 702 | for r in NETFS-* ; do
|
|---|
| 703 | cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
|
|---|
| 704 | LogFile "INFO: Copying $r to ramdisk"
|
|---|
| 705 | done
|
|---|
| 706 | fi
|
|---|
| 707 | fi
|
|---|
| 708 | tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
|
|---|
| 709 | rm -f $tempfile $outfile.pre
|
|---|
| 710 | [ "$res" -eq "0" ] && echo -e "$DONE" || echo "\nFailed."
|
|---|
| 711 | return $res
|
|---|
| 712 | }
|
|---|
| 713 |
|
|---|
| 714 |
|
|---|
| 715 | GenerateListForFile() {
|
|---|
| 716 | local files_found fname incoming
|
|---|
| 717 | incoming="$1"
|
|---|
| 718 | files_found=""
|
|---|
| 719 |
|
|---|
| 720 | for fname in $incoming ; do
|
|---|
| 721 | files_found="$files_found `LocateFile $fname`"
|
|---|
| 722 | done
|
|---|
| 723 |
|
|---|
| 724 | echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
|
|---|
| 725 | }
|
|---|
| 726 |
|
|---|
| 727 |
|
|---|
| 728 | # Returns all disk devices which are part of a raid array
|
|---|
| 729 | GetAllRaidMembers() {
|
|---|
| 730 | $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
|
|---|
| 731 | }
|
|---|
| 732 |
|
|---|
| 733 |
|
|---|
| 734 | GetFileSizeList() {
|
|---|
| 735 | local i
|
|---|
| 736 | for i in `find $1 -type d -o -print` ; do
|
|---|
| 737 | du -sk $i
|
|---|
| 738 | done
|
|---|
| 739 | }
|
|---|
| 740 |
|
|---|
| 741 |
|
|---|
| 742 | # Check kernel filesystem capabilites for accessing initrd image
|
|---|
| 743 | # Could be ext2 FS (old mode) or initramfs (new mode)
|
|---|
| 744 | #
|
|---|
| 745 | # Interface definition:
|
|---|
| 746 | # param #1: absolute path to kernel image
|
|---|
| 747 | GetInitrdFilesystemToUse() {
|
|---|
| 748 |
|
|---|
| 749 | # interface test: make sure we have one parameter
|
|---|
| 750 | if [ $# -ne 1 ]; then
|
|---|
| 751 | Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
|
|---|
| 752 | fi
|
|---|
| 753 |
|
|---|
| 754 | # interface parameters
|
|---|
| 755 | local lvKernelImage=$1
|
|---|
| 756 |
|
|---|
| 757 | # local constants (filesystem magic strings)
|
|---|
| 758 | local lcMagicCramfs="<3>cramfs: wrong magic"
|
|---|
| 759 | local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
|
|---|
| 760 | local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
|
|---|
| 761 | local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
|
|---|
| 762 |
|
|---|
| 763 | # local variables
|
|---|
| 764 | local lvOffset
|
|---|
| 765 | local lvScanRes
|
|---|
| 766 | local lvUseFilesystem
|
|---|
| 767 |
|
|---|
| 768 | # say where we are.
|
|---|
| 769 | LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
|
|---|
| 770 |
|
|---|
| 771 | # verify that file exists
|
|---|
| 772 | [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
|
|---|
| 773 |
|
|---|
| 774 | # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
|
|---|
| 775 | file $lvKernelImage 2>&1 | grep -q gzip
|
|---|
| 776 | if [ $? -eq 0 ]; then
|
|---|
| 777 | LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
|
|---|
| 778 | lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
|
|---|
| 779 | else
|
|---|
| 780 | LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
|
|---|
| 781 | # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
|
|---|
| 782 | # get offet of gzip magic "1f8b0800" in file (for these older kernels)
|
|---|
| 783 | lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
|
|---|
| 784 | if [ $lvOffset -eq 0 ]; then
|
|---|
| 785 | LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
|
|---|
| 786 | lvScanRes=$lcMagicInitfs
|
|---|
| 787 | else
|
|---|
| 788 | lvOffset=`expr $lvOffset / 2`
|
|---|
| 789 | LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
|
|---|
| 790 | # scan again kernel image
|
|---|
| 791 | lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
|
|---|
| 792 | fi
|
|---|
| 793 | fi
|
|---|
| 794 |
|
|---|
| 795 | # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
|
|---|
| 796 | if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
|
|---|
| 797 | lvUseFilesystem="ext2fs"
|
|---|
| 798 | elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
|
|---|
| 799 | lvUseFilesystem="ext3fs"
|
|---|
| 800 | elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
|
|---|
| 801 | lvUseFilesystem="initramfs"
|
|---|
| 802 | elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
|
|---|
| 803 | lvUseFilesystem="cramfs"
|
|---|
| 804 | else
|
|---|
| 805 | # In that case, we are most probably after 2.6.30 and use the supported initramfs
|
|---|
| 806 | LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
|
|---|
| 807 | LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
|
|---|
| 808 | LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
|
|---|
| 809 | lvUseFilesystem="initramfs"
|
|---|
| 810 | fi
|
|---|
| 811 |
|
|---|
| 812 | # say what we are using
|
|---|
| 813 | LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
|
|---|
| 814 |
|
|---|
| 815 | # return file system to use
|
|---|
| 816 | echo "$lvUseFilesystem"
|
|---|
| 817 |
|
|---|
| 818 | }
|
|---|
| 819 |
|
|---|
| 820 | # Searches members of raid device
|
|---|
| 821 | # $1: raid device (/dev/md...)
|
|---|
| 822 | GetRaidDevMembers() {
|
|---|
| 823 | if [ ! -f /etc/raidtab ]; then
|
|---|
| 824 | return
|
|---|
| 825 | fi
|
|---|
| 826 | $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
|
|---|
| 827 | }
|
|---|
| 828 |
|
|---|
| 829 |
|
|---|
| 830 | ListAllPartitions() {
|
|---|
| 831 | grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
|
|---|
| 832 | [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
|
|---|
| 833 | if [ -e "/vmfs/volumes" ]; then
|
|---|
| 834 | # For VMWare ESX 3 get the device names of these volumes
|
|---|
| 835 | vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
|
|---|
| 836 | fi
|
|---|
| 837 | return
|
|---|
| 838 | }
|
|---|
| 839 |
|
|---|
| 840 |
|
|---|
| 841 | ListKernelModulePaths() {
|
|---|
| 842 | local module_list module fname r kern
|
|---|
| 843 | module_list="$MODULES"
|
|---|
| 844 | # Remove unwanted modules from list
|
|---|
| 845 | for i in $DENY_MODS; do
|
|---|
| 846 | module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
|
|---|
| 847 | done
|
|---|
| 848 | ###
|
|---|
| 849 | ### Sq-Modification ... Use kernelname for module search path if specified
|
|---|
| 850 | ###
|
|---|
| 851 | if [ "${kernelname}" != "" ]
|
|---|
| 852 | then
|
|---|
| 853 | kern=${kernelname}
|
|---|
| 854 | else
|
|---|
| 855 | kern="$KERVERRUN"
|
|---|
| 856 | fi
|
|---|
| 857 | export KERVER=$kern
|
|---|
| 858 | ###
|
|---|
| 859 | ### Sq-Mod End
|
|---|
| 860 | ###
|
|---|
| 861 | # Get rid of duplicates
|
|---|
| 862 | for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
|
|---|
| 863 | r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
|
|---|
| 864 | if [ -z "$r" ]; then
|
|---|
| 865 | if [ "`echo "$MODULES" | grep -w $module`" ]; then
|
|---|
| 866 | r="[live module file not found]"
|
|---|
| 867 | else
|
|---|
| 868 | r="[extra module file not found]"
|
|---|
| 869 | fi
|
|---|
| 870 | else
|
|---|
| 871 | [ -f "$r" ] && echo "$r"
|
|---|
| 872 | fi
|
|---|
| 873 | LogFile "INFO: module $module --> $r"
|
|---|
| 874 | done
|
|---|
| 875 | find /lib/modules/$kern/modules.* -type f 2> /dev/null
|
|---|
| 876 | }
|
|---|
| 877 |
|
|---|
| 878 | #
|
|---|
| 879 | # Critical function which computes all dependencies (dyn. lib.)
|
|---|
| 880 | # for a list of binaries
|
|---|
| 881 | #
|
|---|
| 882 | LocateDeps() {
|
|---|
| 883 | local incoming fname deps
|
|---|
| 884 | incoming="$*"
|
|---|
| 885 | deps=""
|
|---|
| 886 |
|
|---|
| 887 | for fname in $incoming ; do
|
|---|
| 888 | if [ ! -e "$fname" ] ; then
|
|---|
| 889 | LogFile "WARNING: $fname does not exist; cannot be LDD'd."
|
|---|
| 890 | if echo $fname | grep lvm &> /dev/null ; then
|
|---|
| 891 | LogFile " This warning only affects you if you are using LVM."
|
|---|
| 892 | if echo "$MODULES" | grep lvm &> /dev/null ; then
|
|---|
| 893 | LogFile " I think you are, so please take heed!"
|
|---|
| 894 | else
|
|---|
| 895 | LogFile " I don't think you are, so don't worry about it."
|
|---|
| 896 | fi
|
|---|
| 897 | fi
|
|---|
| 898 | else
|
|---|
| 899 | deps="$deps $fname"
|
|---|
| 900 | fi
|
|---|
| 901 | done
|
|---|
| 902 | mr-read-all-link `mr-process-ldd $deps | sort -u` $deps | sort -u
|
|---|
| 903 | }
|
|---|
| 904 |
|
|---|
| 905 |
|
|---|
| 906 | LocateFile() {
|
|---|
| 907 | local j dn newdn bn path fname_to_find output
|
|---|
| 908 | fname_to_find="$1"
|
|---|
| 909 | # It's an absolute path
|
|---|
| 910 | j=`echo "$fname_to_find" | cut -c1`
|
|---|
| 911 | if [ _"$j" = _"/" ]; then
|
|---|
| 912 | dn=`dirname $fname_to_find`
|
|---|
| 913 | # We suppose that the link is already included, just add the new file
|
|---|
| 914 | if [ -h "$dn" ]; then
|
|---|
| 915 | newdn=`readlink -f $dn`
|
|---|
| 916 | bn=`basename $fname_to_find`
|
|---|
| 917 | output="$newdn/$bn"
|
|---|
| 918 | else
|
|---|
| 919 | output="$fname_to_find"
|
|---|
| 920 | fi
|
|---|
| 921 | if [ -h "$output" ] ; then
|
|---|
| 922 | output="`mr-read-all-link $output` $output"
|
|---|
| 923 | fi
|
|---|
| 924 | echo "$output"
|
|---|
| 925 | return 0
|
|---|
| 926 | fi
|
|---|
| 927 | # It's not an absolute path
|
|---|
| 928 | output=""
|
|---|
| 929 | for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
|
|---|
| 930 | #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
|
|---|
| 931 | [ -h "$path" ] && continue
|
|---|
| 932 | [ ! -e "$path/$fname_to_find" ] && continue
|
|---|
| 933 | output="$path/$fname_to_find $output"
|
|---|
| 934 | if [ -h "$path/$fname_to_find" ] ; then
|
|---|
| 935 | output="`mr-read-all-link $path/$fname_to_find` $output"
|
|---|
| 936 | fi
|
|---|
| 937 | done
|
|---|
| 938 | if [ "$output" = "" ] ; then
|
|---|
| 939 | return 1
|
|---|
| 940 | fi
|
|---|
| 941 | echo "$output"
|
|---|
| 942 | return 0
|
|---|
| 943 | }
|
|---|
| 944 |
|
|---|
| 945 | LogProgress() {
|
|---|
| 946 | local i progress modres noof_lines title
|
|---|
| 947 |
|
|---|
| 948 | progress=$1
|
|---|
| 949 | noof_lines=$2
|
|---|
| 950 | title=$3
|
|---|
| 951 |
|
|---|
| 952 | i=$(($progress*100))
|
|---|
| 953 | if [ $noof_lines -ne 0 ]; then
|
|---|
| 954 | i=$(($i/$noof_lines))
|
|---|
| 955 | else
|
|---|
| 956 | i=0
|
|---|
| 957 | fi
|
|---|
| 958 |
|
|---|
| 959 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 960 | echo "$title $i%"
|
|---|
| 961 | else
|
|---|
| 962 | echo -en "\r\t\t\t\t\t\t\t\t"
|
|---|
| 963 | echo -en "$i"
|
|---|
| 964 | echo -en "%"
|
|---|
| 965 | modres=$(($progress%4))
|
|---|
| 966 | [ "$modres" -eq "0" ] && echo -en "\t/"
|
|---|
| 967 | [ "$modres" -eq "1" ] && echo -en "\t-"
|
|---|
| 968 | [ "$modres" -eq "2" ] && echo -en "\t\\"
|
|---|
| 969 | [ "$modres" -eq "3" ] && echo -en "\t|"
|
|---|
| 970 | fi
|
|---|
| 971 | }
|
|---|
| 972 |
|
|---|
| 973 | # Called by PrepareTargetDir, to make /tmp/$MRCFG
|
|---|
| 974 | MakeMondoConfigFile() {
|
|---|
| 975 | local outfile use_lzo use_comp use_star use_gzip use_lzma
|
|---|
| 976 | outfile=$1
|
|---|
| 977 | > $outfile
|
|---|
| 978 | [ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
|
|---|
| 979 | [ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
|
|---|
| 980 | [ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
|
|---|
| 981 | [ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
|
|---|
| 982 | [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
|
|---|
| 983 | [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
|
|---|
| 984 | use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
|
|---|
| 985 | use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
|
|---|
| 986 | use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
|
|---|
| 987 | use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
|
|---|
| 988 | use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
|
|---|
| 989 | echo "use-lzo $use_lzo" >> $outfile
|
|---|
| 990 | echo "use-gzip $use_gzip" >> $outfile
|
|---|
| 991 | echo "use-star $use_star" >> $outfile
|
|---|
| 992 | echo "use-lzma $use_lzma" >> $outfile
|
|---|
| 993 | echo "use-comp $use_comp" >> $outfile
|
|---|
| 994 | echo "boot-type $BOOT_TYPE" >> $outfile
|
|---|
| 995 | echo "datestamp `date`" >> $outfile
|
|---|
| 996 | [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
|
|---|
| 997 | AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
|
|---|
| 998 | AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
|
|---|
| 999 | AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
|
|---|
| 1000 | AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
|
|---|
| 1001 | AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
|
|---|
| 1002 | AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
|
|---|
| 1003 | AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
|
|---|
| 1004 | AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
|
|---|
| 1005 | AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
|
|---|
| 1006 | AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
|
|---|
| 1007 | AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
|
|---|
| 1008 | AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
|
|---|
| 1009 | AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
|
|---|
| 1010 |
|
|---|
| 1011 | # Deal with network configuration in a portable way
|
|---|
| 1012 | if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
|
|---|
| 1013 | mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
|
|---|
| 1014 | fi
|
|---|
| 1015 | }
|
|---|
| 1016 |
|
|---|
| 1017 | # Get PV's for an LV
|
|---|
| 1018 | GetPVsForLV() {
|
|---|
| 1019 | local vg
|
|---|
| 1020 |
|
|---|
| 1021 | if [ -n "$1" ]; then
|
|---|
| 1022 | vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
|
|---|
| 1023 | if [ -z "$vg" ]; then
|
|---|
| 1024 | return
|
|---|
| 1025 | fi
|
|---|
| 1026 | $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
|
|---|
| 1027 | fi
|
|---|
| 1028 | }
|
|---|
| 1029 |
|
|---|
| 1030 |
|
|---|
| 1031 | MakeMountlist() {
|
|---|
| 1032 | local mountlist all_partitions current_partition \
|
|---|
| 1033 | partition_size partition_format outstring partition_number \
|
|---|
| 1034 | partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
|
|---|
| 1035 | absolute_partition old_partition_fmt current_lvolume uname skip
|
|---|
| 1036 |
|
|---|
| 1037 | LogFile "------------------------------------"
|
|---|
| 1038 | LogFile "INFO: Your raw fstab file looks like this:"
|
|---|
| 1039 | LogFile "------------------------------------"
|
|---|
| 1040 | cat $MY_FSTAB >> $LOGFILE
|
|---|
| 1041 | LogAll "-----------------------------------"
|
|---|
| 1042 | LogAll "INFO: Your mountlist will look like this:"
|
|---|
| 1043 | LogAll "-----------------------------------"
|
|---|
| 1044 |
|
|---|
| 1045 | # mountlist(OUT)
|
|---|
| 1046 | mountlist=$1
|
|---|
| 1047 |
|
|---|
| 1048 | # NB: partition = device
|
|---|
| 1049 | # NB: mountpt = where the device is mounted
|
|---|
| 1050 |
|
|---|
| 1051 | [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
|
|---|
| 1052 |
|
|---|
| 1053 | [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
|
|---|
| 1054 | > $mountlist
|
|---|
| 1055 | all_partitions=""
|
|---|
| 1056 |
|
|---|
| 1057 | if [ $LVM != "false" ]; then
|
|---|
| 1058 | LogFile "INFO: Analyzing LVM..."
|
|---|
| 1059 | $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
|
|---|
| 1060 | if [ $? -ne 0 ]; then
|
|---|
| 1061 | LVM="false"
|
|---|
| 1062 | fi
|
|---|
| 1063 | # Excluded LVs and GVs are not reported here
|
|---|
| 1064 | all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
|
|---|
| 1065 | fi
|
|---|
| 1066 | all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
|
|---|
| 1067 | for i in $IMAGE_DEVS ; do
|
|---|
| 1068 | mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
|
|---|
| 1069 | done
|
|---|
| 1070 | [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
|
|---|
| 1071 | printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
|
|---|
| 1072 | printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- | tee -a $LOGFILE
|
|---|
| 1073 | useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
|
|---|
| 1074 | for c_p in $all_partitions ; do
|
|---|
| 1075 | # Skip fd/cd devices, network FS, cifs
|
|---|
| 1076 | [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
|
|---|
| 1077 | [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
|
|---|
| 1078 | if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
|
|---|
| 1079 | current_partition=`readlink -f $c_p`
|
|---|
| 1080 | if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
|
|---|
| 1081 | current_partition="$c_p"
|
|---|
| 1082 | elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
|
|---|
| 1083 | # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
|
|---|
| 1084 | current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
|
|---|
| 1085 | fi
|
|---|
| 1086 | [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
|
|---|
| 1087 | else
|
|---|
| 1088 | current_partition="$c_p"
|
|---|
| 1089 | fi
|
|---|
| 1090 | [ "$c_p" = "none" ] && continue
|
|---|
| 1091 | redhat_label=""
|
|---|
| 1092 | label=""
|
|---|
| 1093 | uuid=""
|
|---|
| 1094 | absolute_partition=`readlink -f $c_p`
|
|---|
| 1095 | partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
|
|---|
| 1096 |
|
|---|
| 1097 | # set default in case we dont't find it
|
|---|
| 1098 | str_to_find_fmt_with=$current_partition
|
|---|
| 1099 |
|
|---|
| 1100 | # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
|
|---|
| 1101 | # current_partition contains only first column of /etc/fstab
|
|---|
| 1102 | if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
|
|---|
| 1103 | redhat_label=`echo "$current_partition" | cut -d'=' -f2`
|
|---|
| 1104 | actual_dev=""
|
|---|
| 1105 |
|
|---|
| 1106 | # 1st try, findfs - the RHEL way of finding labels and their partitions
|
|---|
| 1107 | if [ -x "/sbin/findfs" ]; then
|
|---|
| 1108 | actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
|
|---|
| 1109 | fi
|
|---|
| 1110 |
|
|---|
| 1111 | # 2nd try : blkid, the good way for all LABEL except swap
|
|---|
| 1112 | if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
|
|---|
| 1113 | actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
|
|---|
| 1114 | # For LVM FS it will give a /dev/dm-# which should then be converted
|
|---|
| 1115 | if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
|
|---|
| 1116 | major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
|
|---|
| 1117 | minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
|
|---|
| 1118 | for dev in `ls /dev/mapper/*`; do
|
|---|
| 1119 | major1=`/bin/ls -l $dev | $AWK '{print $5}'`
|
|---|
| 1120 | minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
|
|---|
| 1121 | if [ $major1 = $major ] && [ $minor1 = $minor ]; then
|
|---|
| 1122 | actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
|
|---|
| 1123 | break
|
|---|
| 1124 | fi
|
|---|
| 1125 | done
|
|---|
| 1126 | fi
|
|---|
| 1127 | fi
|
|---|
| 1128 |
|
|---|
| 1129 | # 3rd try, which works on a standard partition (ext2/3), but not on swap
|
|---|
| 1130 | # For LVM gives a /dev/mapper entry
|
|---|
| 1131 | if [ "x$actual_dev" = "x" ]; then
|
|---|
| 1132 | actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
|
|---|
| 1133 | fi
|
|---|
| 1134 |
|
|---|
| 1135 | # 4th try, with vol_id
|
|---|
| 1136 | # SWAP only
|
|---|
| 1137 | if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
|
|---|
| 1138 | list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
|
|---|
| 1139 | for dev_swap in $list_swaps ; do
|
|---|
| 1140 | dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
|
|---|
| 1141 | if [ "x$dev_exists" != "x" ]; then
|
|---|
| 1142 | actual_dev=$dev_swap
|
|---|
| 1143 | break;
|
|---|
| 1144 | fi
|
|---|
| 1145 | done
|
|---|
| 1146 | fi
|
|---|
| 1147 |
|
|---|
| 1148 | # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
|
|---|
| 1149 | # LABEL=SW-cciss/c0d0p3 (RDP)
|
|---|
| 1150 | # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
|
|---|
| 1151 | # SWAP only
|
|---|
| 1152 | if [ "x$actual_dev" = "x" -a _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
|
|---|
| 1153 | skip=""
|
|---|
| 1154 | uname=$KERVERRUN
|
|---|
| 1155 | [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
|
|---|
| 1156 | # 2.6.12 needs 16 (FC3)
|
|---|
| 1157 | [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
|
|---|
| 1158 | # 2.6.19 and upper needs 1052
|
|---|
| 1159 | [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
|
|---|
| 1160 | [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
|
|---|
| 1161 | [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
|
|---|
| 1162 | if [ $skip = "" ]; then
|
|---|
| 1163 | Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
|
|---|
| 1164 | fi
|
|---|
| 1165 | for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
|
|---|
| 1166 | do
|
|---|
| 1167 | # Location of the swap label for kernel 2.6
|
|---|
| 1168 | try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
|
|---|
| 1169 | if [ "x$try_dev_label" = "x$redhat_label" ]; then
|
|---|
| 1170 | actual_dev=$try_dev
|
|---|
| 1171 | fi
|
|---|
| 1172 | done
|
|---|
| 1173 | fi
|
|---|
| 1174 |
|
|---|
| 1175 | # Check if one of all those tries has known success
|
|---|
| 1176 | if [ "x$actual_dev" != "x" ]; then
|
|---|
| 1177 | current_partition=$actual_dev
|
|---|
| 1178 | else
|
|---|
| 1179 | Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
|
|---|
| 1180 | fi
|
|---|
| 1181 | # This part tries to retrieve the correct device from a UUID line in /etc/fstab
|
|---|
| 1182 | # current_partition contains only first column of /etc/fstab
|
|---|
| 1183 | elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
|
|---|
| 1184 | uuid=`echo "$current_partition" | cut -d'=' -f2`
|
|---|
| 1185 | actual_dev=""
|
|---|
| 1186 |
|
|---|
| 1187 | # 1st try, findfs - the RHEL way of finding labels and their partitions
|
|---|
| 1188 | if [ -x "/sbin/findfs" ]; then
|
|---|
| 1189 | actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
|
|---|
| 1190 | fi
|
|---|
| 1191 |
|
|---|
| 1192 | # 2nd try : blkid, the good way for all UUID except swap
|
|---|
| 1193 | if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
|
|---|
| 1194 | actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
|
|---|
| 1195 | # For LVM FS it will give a /dev/dm-# which should then be converted
|
|---|
| 1196 | if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
|
|---|
| 1197 | major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
|
|---|
| 1198 | minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
|
|---|
| 1199 | for dev in `ls /dev/mapper/*`; do
|
|---|
| 1200 | major1=`/bin/ls -l $dev | $AWK '{print $5}'`
|
|---|
| 1201 | minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
|
|---|
| 1202 | if [ $major1 = $major ] && [ $minor1 = $minor ]; then
|
|---|
| 1203 | actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
|
|---|
| 1204 | break
|
|---|
| 1205 | fi
|
|---|
| 1206 | done
|
|---|
| 1207 | fi
|
|---|
| 1208 | fi
|
|---|
| 1209 |
|
|---|
| 1210 | # 3th try, with vol_id
|
|---|
| 1211 | if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
|
|---|
| 1212 | list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
|
|---|
| 1213 | for dev in $list_dev ; do
|
|---|
| 1214 | dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
|
|---|
| 1215 | if [ "x$dev_exists" != "x" ]; then
|
|---|
| 1216 | actual_dev=$dev
|
|---|
| 1217 | break;
|
|---|
| 1218 | fi
|
|---|
| 1219 | done
|
|---|
| 1220 | fi
|
|---|
| 1221 |
|
|---|
| 1222 | # 4th try, with dumpuuid (VMWare only ?) for swap
|
|---|
| 1223 | if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
|
|---|
| 1224 | list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
|
|---|
| 1225 | for dev in $list_dev ; do
|
|---|
| 1226 | dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
|
|---|
| 1227 | if [ "x$dev_exists" != "x" ]; then
|
|---|
| 1228 | actual_dev=$dev
|
|---|
| 1229 | break;
|
|---|
| 1230 | fi
|
|---|
| 1231 | done
|
|---|
| 1232 | fi
|
|---|
| 1233 |
|
|---|
| 1234 | # Check if one of all those tries has known success
|
|---|
| 1235 | if [ "x$actual_dev" != "x" ]; then
|
|---|
| 1236 | current_partition=$actual_dev
|
|---|
| 1237 | else
|
|---|
| 1238 | Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
|
|---|
| 1239 | fi
|
|---|
| 1240 | else
|
|---|
| 1241 | # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
|
|---|
| 1242 | # they use symlinks in fstab unrelated to what is shown in mount !
|
|---|
| 1243 | if [ _"$partition_mountpt" = _"" ]; then
|
|---|
| 1244 | # set default in case we dont't find it
|
|---|
| 1245 | for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
|
|---|
| 1246 | if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
|
|---|
| 1247 | str_to_find_fmt_with=$tmpp
|
|---|
| 1248 | partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
|
|---|
| 1249 | break;
|
|---|
| 1250 | fi
|
|---|
| 1251 | done
|
|---|
| 1252 | fi
|
|---|
| 1253 | fi
|
|---|
| 1254 |
|
|---|
| 1255 | # Detects noauto partitions not mounted and exclude them
|
|---|
| 1256 | partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
|
|---|
| 1257 | if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" = "" ] ; then
|
|---|
| 1258 | LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
|
|---|
| 1259 | continue
|
|---|
| 1260 | fi
|
|---|
| 1261 | # Detects bind partitions and exclude them
|
|---|
| 1262 | if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
|
|---|
| 1263 | LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
|
|---|
| 1264 | continue
|
|---|
| 1265 | fi
|
|---|
| 1266 |
|
|---|
| 1267 | # Look for devices which have to be excluded
|
|---|
| 1268 | skip=0
|
|---|
| 1269 | if [ "$MINDI_EXCLUDE_DEVS" ] ; then
|
|---|
| 1270 | l=""
|
|---|
| 1271 | list_of_devices="`mr-read-all-link $current_partition`"
|
|---|
| 1272 | for d in $list_of_devices; do
|
|---|
| 1273 | l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
|
|---|
| 1274 | done
|
|---|
| 1275 |
|
|---|
| 1276 | # Remove PVs from LVs excluded
|
|---|
| 1277 | l="$l `GetPVsForLV $current_partition`"
|
|---|
| 1278 |
|
|---|
| 1279 | # We want a single unique list
|
|---|
| 1280 | list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
|
|---|
| 1281 |
|
|---|
| 1282 | for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
|
|---|
| 1283 | if [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
|
|---|
| 1284 | LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
|
|---|
| 1285 | skip=1
|
|---|
| 1286 | continue
|
|---|
| 1287 | fi
|
|---|
| 1288 | done
|
|---|
| 1289 | fi
|
|---|
| 1290 | if [ $skip -eq 1 ]; then
|
|---|
| 1291 | continue
|
|---|
| 1292 | fi
|
|---|
| 1293 |
|
|---|
| 1294 | partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
|
|---|
| 1295 | # Detects iso9660 ISO images and exclude them
|
|---|
| 1296 | if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
|
|---|
| 1297 | LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
|
|---|
| 1298 | continue
|
|---|
| 1299 | fi
|
|---|
| 1300 | # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
|
|---|
| 1301 | # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
|
|---|
| 1302 | # the former is then a link to the latter, so we test whether
|
|---|
| 1303 | # $current_partition is actually such a link or not and set
|
|---|
| 1304 | # $current_lvolume accordingly. On Debian you may find more than one answer
|
|---|
| 1305 | # so we remove the one corresponding to /dev/.static
|
|---|
| 1306 | # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
|
|---|
| 1307 | # principle is the same and we need to find the link to it as well.
|
|---|
| 1308 | # Note that $current_lvolume may well be an
|
|---|
| 1309 | # ordinary device. It is just to make sure that we feed the right value
|
|---|
| 1310 | # into any of the LVM tools if possible.
|
|---|
| 1311 |
|
|---|
| 1312 | current_lvolume="$current_partition"
|
|---|
| 1313 | if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
|
|---|
| 1314 | # .static dir are a Debian specificity
|
|---|
| 1315 | current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
|
|---|
| 1316 | echo $current_lvolume | grep -q ' '
|
|---|
| 1317 | if [ $? -eq 0 ]; then
|
|---|
| 1318 | LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
|
|---|
| 1319 | fi
|
|---|
| 1320 | # if it's not found, it may well be a real device such as a multipath one
|
|---|
| 1321 | # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
|
|---|
| 1322 | if [ _"$current_lvolume" = _"" ]; then
|
|---|
| 1323 | current_lvolume="$current_partition"
|
|---|
| 1324 | fi
|
|---|
| 1325 | fi
|
|---|
| 1326 | #
|
|---|
| 1327 | # End of LVM device style variation code (other than $current_lvolume).
|
|---|
| 1328 |
|
|---|
| 1329 | if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
|
|---|
| 1330 | # Size computed via LVM not directly
|
|---|
| 1331 | partition_size="lvm"
|
|---|
| 1332 | else
|
|---|
| 1333 | [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
|
|---|
| 1334 | [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
|
|---|
| 1335 | if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
|
|---|
| 1336 | # Skip swap files
|
|---|
| 1337 | [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
|
|---|
| 1338 | partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
|
|---|
| 1339 | [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
|
|---|
| 1340 | [ "$partition_format" != "swap" ] && partition_format="swap"
|
|---|
| 1341 | if [ "$partition_size" = "" ] ; then
|
|---|
| 1342 | totalsize=0
|
|---|
| 1343 | items=0
|
|---|
| 1344 | for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
|
|---|
| 1345 | totalsize=$(($totalsize+$i))
|
|---|
| 1346 | items=$(($items+1))
|
|---|
| 1347 | done
|
|---|
| 1348 | [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
|
|---|
| 1349 | [ "$partition_size" -lt "125000" ] && partition_size=125000
|
|---|
| 1350 | LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
|
|---|
| 1351 | fi
|
|---|
| 1352 | else
|
|---|
| 1353 | partition_size=`SizeOfPartition $current_partition`
|
|---|
| 1354 | fi
|
|---|
| 1355 | fi
|
|---|
| 1356 | [ "$partition_mountpt" = "swap" ] && partition_format="swap"
|
|---|
| 1357 | [ "$partition_format" = "swap" ] && partition_mountpt="swap"
|
|---|
| 1358 | if [ "$partition_mountpt" = "" ] ; then
|
|---|
| 1359 | if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
|
|---|
| 1360 | if [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
|
|---|
| 1361 | partition_mountpt="raid"
|
|---|
| 1362 | partition_format="raid"
|
|---|
| 1363 | else
|
|---|
| 1364 | partition_mountpt="lvm"
|
|---|
| 1365 | partition_format="lvm"
|
|---|
| 1366 | fi
|
|---|
| 1367 | fi
|
|---|
| 1368 | fi
|
|---|
| 1369 | psz=$partition_size
|
|---|
| 1370 | LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
|
|---|
| 1371 | [ "$psz" != "lvm" ] && psz=$(($psz/1024))
|
|---|
| 1372 | if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
|
|---|
| 1373 | partition_mountpt="image"
|
|---|
| 1374 | old_partition_fmt=$partition_format
|
|---|
| 1375 | partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
|
|---|
| 1376 | partition_size=$(($partition_size+1)); # just in case
|
|---|
| 1377 | if [ "$partition_format" = "Linux" ] ; then
|
|---|
| 1378 | LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
|
|---|
| 1379 | LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
|
|---|
| 1380 | partition_format=$old_partition_fmt
|
|---|
| 1381 | fi
|
|---|
| 1382 | fi
|
|---|
| 1383 |
|
|---|
| 1384 | if [ ! "$partition_mountpt" ] ; then
|
|---|
| 1385 | LogFile "------- $FDISK -l $qq log ------------"
|
|---|
| 1386 | for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
|
|---|
| 1387 | partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
|
|---|
| 1388 | [ "$partition_format" ] && break
|
|---|
| 1389 | done
|
|---|
| 1390 | LogFile "------- $FDISK log end ------------"
|
|---|
| 1391 | if [ "$partition_format" = "Compaq diagnostics" ] ; then
|
|---|
| 1392 | partition_format="compaq"
|
|---|
| 1393 | elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
|
|---|
| 1394 | LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
|
|---|
| 1395 | continue
|
|---|
| 1396 | fi
|
|---|
| 1397 | fi
|
|---|
| 1398 | if [ "$redhat_label" ]; then
|
|---|
| 1399 | label="$redhat_label"
|
|---|
| 1400 | elif [ "$uuid" ]; then
|
|---|
| 1401 | label="$uuid"
|
|---|
| 1402 | fi
|
|---|
| 1403 |
|
|---|
| 1404 | # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
|
|---|
| 1405 | # in order to mount the root part e.g. in grub.
|
|---|
| 1406 | # One way to solve this is to add the UUID now, if there wasn't one so it's
|
|---|
| 1407 | # restored correctly
|
|---|
| 1408 | if [ _"$label" = _"" ]; then
|
|---|
| 1409 | label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
|
|---|
| 1410 | fi
|
|---|
| 1411 |
|
|---|
| 1412 | partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
|
|---|
| 1413 | [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
|
|---|
| 1414 | unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
|
|---|
| 1415 | if [ "$current_partition" = "" ] ; then
|
|---|
| 1416 | LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
|
|---|
| 1417 | elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
|
|---|
| 1418 | if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
|
|---|
| 1419 | partition_mountpt=raid
|
|---|
| 1420 | partition_format=raid
|
|---|
| 1421 | printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
|
|---|
| 1422 | printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
|
|---|
| 1423 | else
|
|---|
| 1424 | LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
|
|---|
| 1425 | fi
|
|---|
| 1426 | elif [ "$partition_format" = "" ] ; then
|
|---|
| 1427 | LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
|
|---|
| 1428 | elif [ "$partition_size" = "" ] ; then
|
|---|
| 1429 | LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
|
|---|
| 1430 | elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
|
|---|
| 1431 | continue
|
|---|
| 1432 | else
|
|---|
| 1433 | if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
|
|---|
| 1434 | LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
|
|---|
| 1435 | partition_format="vfat"
|
|---|
| 1436 | fi
|
|---|
| 1437 | printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
|
|---|
| 1438 | printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
|
|---|
| 1439 | fi
|
|---|
| 1440 | done
|
|---|
| 1441 | LogAll "-----------------------------------"
|
|---|
| 1442 | }
|
|---|
| 1443 |
|
|---|
| 1444 | CheckMountlist() {
|
|---|
| 1445 | local file=$1
|
|---|
| 1446 | # Coherency verification
|
|---|
| 1447 | ML01=`cat $file | wc -l`
|
|---|
| 1448 | ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
|
|---|
| 1449 | ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
|
|---|
| 1450 | ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
|
|---|
| 1451 | if [ "$ML01" -ne "$ML1" ]; then
|
|---|
| 1452 | LogFile "--------------------------------------------"
|
|---|
| 1453 | LogAll "WARNING: Duplicate device entry in mountlist"
|
|---|
| 1454 | LogFile "--------------------------------------------"
|
|---|
| 1455 | fi
|
|---|
| 1456 | if [ "$ML02" -ne "$ML2" ]; then
|
|---|
| 1457 | LogFile "--------------------------------------------"
|
|---|
| 1458 | LogAll "WARNING: Duplicate mountpoint entry in mountlist"
|
|---|
| 1459 | LogFile "------------------------------------------------"
|
|---|
| 1460 | fi
|
|---|
| 1461 | }
|
|---|
| 1462 |
|
|---|
| 1463 |
|
|---|
| 1464 | MakeISOErrors() {
|
|---|
| 1465 |
|
|---|
| 1466 | LogFile "----------- $ISO_CMD's errors --------------"
|
|---|
| 1467 | LogAll "Command invoked: $CMD ."
|
|---|
| 1468 | LogAll "$ISO_CMD returned the following errors:"
|
|---|
| 1469 | cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
|
|---|
| 1470 | LogAll "ERROR: Failed to create ISO image."
|
|---|
| 1471 | }
|
|---|
| 1472 |
|
|---|
| 1473 | MakeISO() {
|
|---|
| 1474 |
|
|---|
| 1475 | LogAll "INFO: Generating ISO image."
|
|---|
| 1476 | LOCISO=`echo $CMD | perl -p -e 's|.* -o (.+)/mindi.iso .*|$1|'`
|
|---|
| 1477 | (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
|
|---|
| 1478 | if [ $? -ne 0 ] ; then
|
|---|
| 1479 | # In case of UEFI handle differences in option handling
|
|---|
| 1480 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
|---|
| 1481 | CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
|
|---|
| 1482 | (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
|
|---|
| 1483 | if [ $? -ne 0 ] ; then
|
|---|
| 1484 | # xorriso e.g.
|
|---|
| 1485 | CMD=`echo $CMD | perl -p -e 's|-eltorito-platform 0xEF ||'`
|
|---|
| 1486 | (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
|
|---|
| 1487 | if [ $? -eq 0 ] ; then
|
|---|
| 1488 | LogAll "INFO: Invoking $CMD ."
|
|---|
| 1489 | LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
|
|---|
| 1490 | else
|
|---|
| 1491 | MakeISOErrors
|
|---|
| 1492 | fi
|
|---|
| 1493 | else
|
|---|
| 1494 | LogAll "INFO: Invoking $CMD ."
|
|---|
| 1495 | LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
|
|---|
| 1496 | fi
|
|---|
| 1497 | else
|
|---|
| 1498 | MakeISOErrors
|
|---|
| 1499 | fi
|
|---|
| 1500 | else
|
|---|
| 1501 | LogAll "INFO: Invoking $CMD ."
|
|---|
| 1502 | LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
|
|---|
| 1503 | fi
|
|---|
| 1504 | rm -f $MINDI_TMP/mkisofs.log
|
|---|
| 1505 | }
|
|---|
| 1506 |
|
|---|
| 1507 | MakeBootableDevice() {
|
|---|
| 1508 |
|
|---|
| 1509 | local target tbc retval part size mount_opt
|
|---|
| 1510 |
|
|---|
| 1511 | target="$1"
|
|---|
| 1512 |
|
|---|
| 1513 | rm -Rf $MINDI_TMP/target
|
|---|
| 1514 | mkdir -p $MINDI_TMP/target/{images,archives,tmp}
|
|---|
| 1515 |
|
|---|
| 1516 | LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
|
|---|
| 1517 | cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
|
|---|
| 1518 | for i in memdisk memtest.bin memtest.img ; do
|
|---|
| 1519 | j=$MINDI_LIB/$i
|
|---|
| 1520 | k=$MINDI_TMP/target
|
|---|
| 1521 | if [ -e "$j" ] ; then
|
|---|
| 1522 | LogAll "INFO: Copying $j to $k"
|
|---|
| 1523 | cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
|
|---|
| 1524 | cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
|
|---|
| 1525 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 1526 | cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
|
|---|
| 1527 | fi
|
|---|
| 1528 | fi
|
|---|
| 1529 | done
|
|---|
| 1530 |
|
|---|
| 1531 | retval=0
|
|---|
| 1532 | LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
|
|---|
| 1533 | cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
|
|---|
| 1534 | if [ $? -ne 0 ] ; then
|
|---|
| 1535 | LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
|
|---|
| 1536 | retval=$(($retval+1))
|
|---|
| 1537 | fi
|
|---|
| 1538 | LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
|
|---|
| 1539 | cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
|
|---|
| 1540 | if [ $? -ne 0 ] ; then
|
|---|
| 1541 | LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
|
|---|
| 1542 | retval=$(($retval+1))
|
|---|
| 1543 | fi
|
|---|
| 1544 |
|
|---|
| 1545 | # copy boot stuff now generated in PrepareBigDir
|
|---|
| 1546 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
|---|
| 1547 | (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
|
|---|
| 1548 | tbc="EFI"
|
|---|
| 1549 | # Also prepare a BIOS compatible boot
|
|---|
| 1550 | if [ "$target" = "ISO" ]; then
|
|---|
| 1551 | cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
|
|---|
| 1552 | fi
|
|---|
| 1553 | else
|
|---|
| 1554 | (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
|
|---|
| 1555 | tbc="syslinux"
|
|---|
| 1556 | if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
|
|---|
| 1557 | LogFile "----------- syslinux's conf --------------"
|
|---|
| 1558 | cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
|
|---|
| 1559 | LogFile "------------------------------------------"
|
|---|
| 1560 | fi
|
|---|
| 1561 | if [ "$target" = "ISO" ]; then
|
|---|
| 1562 | cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
|
|---|
| 1563 | if [ $? -ne 0 ] ; then
|
|---|
| 1564 | LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
|
|---|
| 1565 | retval=$(($retval+1))
|
|---|
| 1566 | fi
|
|---|
| 1567 | fi
|
|---|
| 1568 | fi
|
|---|
| 1569 |
|
|---|
| 1570 | if [ "$ARCH" != "ia64" ] ; then
|
|---|
| 1571 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
|---|
| 1572 | FindMboot32Binary
|
|---|
| 1573 | cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
|
|---|
| 1574 | if [ $? -ne 0 ] ; then
|
|---|
| 1575 | LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
|
|---|
| 1576 | retval=$(($retval+1))
|
|---|
| 1577 | fi
|
|---|
| 1578 | cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
|
|---|
| 1579 | if [ $? -ne 0 ] ; then
|
|---|
| 1580 | LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
|
|---|
| 1581 | retval=$(($retval+1))
|
|---|
| 1582 | fi
|
|---|
| 1583 | fi
|
|---|
| 1584 | fi
|
|---|
| 1585 |
|
|---|
| 1586 | MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
|
|---|
| 1587 |
|
|---|
| 1588 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 1589 | cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
|
|---|
| 1590 | if [ $? -ne 0 ] ; then
|
|---|
| 1591 | LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
|
|---|
| 1592 | LogAll " Please check the target directory."
|
|---|
| 1593 | retval=$(($retval+1))
|
|---|
| 1594 | fi
|
|---|
| 1595 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
|---|
| 1596 | cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
|
|---|
| 1597 | if [ $? -ne 0 ] ; then
|
|---|
| 1598 | LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
|
|---|
| 1599 | LogAll " Please check the target directory."
|
|---|
| 1600 | retval=$(($retval+1))
|
|---|
| 1601 | fi
|
|---|
| 1602 | fi
|
|---|
| 1603 | cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
|
|---|
| 1604 | cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
|
|---|
| 1605 | if [ $? -ne 0 ] ; then
|
|---|
| 1606 | LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
|
|---|
| 1607 | LogAll " Please check the target directory."
|
|---|
| 1608 | retval=$(($retval+1))
|
|---|
| 1609 | fi
|
|---|
| 1610 | cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
|
|---|
| 1611 | if [ $? -ne 0 ] ; then
|
|---|
| 1612 | LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
|
|---|
| 1613 | LogAll " Please check the target directory."
|
|---|
| 1614 | retval=$(($retval+1))
|
|---|
| 1615 | fi
|
|---|
| 1616 | fi
|
|---|
| 1617 |
|
|---|
| 1618 | if [ -f "$MINDI_TMP/$MRCFG" ]; then
|
|---|
| 1619 | cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
|
|---|
| 1620 | fi
|
|---|
| 1621 |
|
|---|
| 1622 | LogFile "----------- target dir content -----------"
|
|---|
| 1623 | LogFile "------------------------------------------"
|
|---|
| 1624 | ls -lR $MINDI_TMP/target >> $LOGFILE
|
|---|
| 1625 | LogFile "------------------------------------------"
|
|---|
| 1626 | LogFile "----------- target dir sizes -------------"
|
|---|
| 1627 | du -sk $MINDI_TMP/target/* >> $LOGFILE
|
|---|
| 1628 | LogFile "------------------------------------------"
|
|---|
| 1629 | LogFile "Kernel size = `du -sk $kernelpath | cut -f1` K"
|
|---|
| 1630 | LogFile "--------------------------------"
|
|---|
| 1631 |
|
|---|
| 1632 | if [ "$retval" -ne "0" ] ; then
|
|---|
| 1633 | sync
|
|---|
| 1634 | umount $MINDI_TMP/target
|
|---|
| 1635 | LogAll "ERROR: Problems while creating boot media."
|
|---|
| 1636 | LogAll " Please unload some of your modules and try again."
|
|---|
| 1637 | Die " Try using another temporary directory instead of $MINDI_TMP"
|
|---|
| 1638 | fi
|
|---|
| 1639 |
|
|---|
| 1640 | mkdir -p $MINDI_TMP/mpt
|
|---|
| 1641 |
|
|---|
| 1642 | if [ "$target" = "USB" ]; then
|
|---|
| 1643 | LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
|
|---|
| 1644 | LogAll "INFO: Checking $USBDEVICE"
|
|---|
| 1645 | $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
|
|---|
| 1646 | if [ $? -ne 0 ]; then
|
|---|
| 1647 | LogAll "ERROR: Unable to access $USBDEVICE"
|
|---|
| 1648 | LogAll " Make sure your USB device is plugged in"
|
|---|
| 1649 | MindiExit -1
|
|---|
| 1650 | fi
|
|---|
| 1651 | # Some distro do auto mount at that point (Ubuntu)
|
|---|
| 1652 | LogAll "INFO: Unmounting $USBPART just in case"
|
|---|
| 1653 | sync
|
|---|
| 1654 | umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
|
|---|
| 1655 | if [ "$BOOT_TYPE" = "BIOS" ]; then
|
|---|
| 1656 | # If your key has no MBR it may cause an issue
|
|---|
| 1657 | # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
|
|---|
| 1658 | if [ -r $MBRFILE ]; then
|
|---|
| 1659 | LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
|
|---|
| 1660 | dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
|
|---|
| 1661 | else
|
|---|
| 1662 | LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
|
|---|
| 1663 | LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
|
|---|
| 1664 | fi
|
|---|
| 1665 | fi
|
|---|
| 1666 | LogAll "INFO: Preparing $USBDEVICE"
|
|---|
| 1667 | cat > $MINDI_TMP/fdisk.txt << EOF
|
|---|
| 1668 | d
|
|---|
| 1669 | d
|
|---|
| 1670 | d
|
|---|
| 1671 | d
|
|---|
| 1672 | n
|
|---|
| 1673 | p
|
|---|
| 1674 | 1
|
|---|
| 1675 |
|
|---|
| 1676 |
|
|---|
| 1677 | t
|
|---|
| 1678 | b
|
|---|
| 1679 | a
|
|---|
| 1680 | 1
|
|---|
| 1681 | w
|
|---|
| 1682 | EOF
|
|---|
| 1683 | $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
|
|---|
| 1684 | if [ $? -ne 0 ]; then
|
|---|
| 1685 | LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
|
|---|
| 1686 | LogAll " Make sure your USB device is plugged in"
|
|---|
| 1687 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
|---|
| 1688 | MindiExit -1
|
|---|
| 1689 | fi
|
|---|
| 1690 | LogFile "fdisk build file"
|
|---|
| 1691 | LogFile "----------------"
|
|---|
| 1692 | cat $MINDI_TMP/fdisk.txt >> $LOGFILE
|
|---|
| 1693 | LogFile "----------------"
|
|---|
| 1694 | rm -f $MINDI_TMP/fdisk.txt
|
|---|
| 1695 | LogAll "INFO: The USB device $USBDEVICE now looks like this:"
|
|---|
| 1696 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
|---|
| 1697 | # Calling kpartx in case devices were not created
|
|---|
| 1698 | if [ -x "/sbin/kpartx" ]; then
|
|---|
| 1699 | /sbin/kpartx -a $USBDEVICE
|
|---|
| 1700 | fi
|
|---|
| 1701 | # Some distro do auto mount at that point (Ubuntu)
|
|---|
| 1702 | LogAll "INFO: Unmounting $USBPART just in case again"
|
|---|
| 1703 | sync
|
|---|
| 1704 | umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
|
|---|
| 1705 | # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
|
|---|
| 1706 | if [ "`which dmsetup`" != "" ]; then
|
|---|
| 1707 | block_id="`echo $USBPART | sed 's/\/dev\///g'`"
|
|---|
| 1708 | if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
|
|---|
| 1709 | LogAll "INFO: Removing $block_id from device mapper."
|
|---|
| 1710 | sleep 1
|
|---|
| 1711 | dmsetup remove $block_id
|
|---|
| 1712 | fi
|
|---|
| 1713 | fi
|
|---|
| 1714 | part=$USBPART
|
|---|
| 1715 | mount_opt=""
|
|---|
| 1716 | else
|
|---|
| 1717 | # ISO image
|
|---|
| 1718 | part=$MINDI_TMP/mindi-bootroot.img
|
|---|
| 1719 | size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
|
|---|
| 1720 | # Adds 10 MB to allow for additional space
|
|---|
| 1721 | size=$(($size+10000))
|
|---|
| 1722 | LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
|
|---|
| 1723 | dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
|
|---|
| 1724 | mount_opt="-o loop"
|
|---|
| 1725 | fi
|
|---|
| 1726 |
|
|---|
| 1727 | LogAll "INFO: Creating a vfat filesystem on $part"
|
|---|
| 1728 |
|
|---|
| 1729 | mkfs.vfat $part 2>&1 >> $LOGFILE
|
|---|
| 1730 | if [ $? -ne 0 ]; then
|
|---|
| 1731 | LogAll "ERROR: Unable to create a vfat filesystem on $part"
|
|---|
| 1732 | if [ "$target" = "USB" ]; then
|
|---|
| 1733 | LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
|
|---|
| 1734 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
|---|
| 1735 | fi
|
|---|
| 1736 | MindiExit -1
|
|---|
| 1737 | fi
|
|---|
| 1738 | if [ "$target" = "ISO" ]; then
|
|---|
| 1739 | if [ "$BOOT_TYPE" = "BIOS" ]; then
|
|---|
| 1740 | # syslinux should be run on a local file (doen't work through NFS Cf: #297)
|
|---|
| 1741 | # and run after the formating for versions > 6 it seems
|
|---|
| 1742 | syslinux $part >> $LOGFILE 2>> $LOGFILE
|
|---|
| 1743 | fi
|
|---|
| 1744 | fi
|
|---|
| 1745 | LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
|
|---|
| 1746 | mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
|
|---|
| 1747 | if [ $? -ne 0 ]; then
|
|---|
| 1748 | LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
|
|---|
| 1749 | if [ "$target" = "USB" ]; then
|
|---|
| 1750 | LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
|
|---|
| 1751 | $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
|
|---|
| 1752 | fi
|
|---|
| 1753 | MindiExit -1
|
|---|
| 1754 | fi
|
|---|
| 1755 |
|
|---|
| 1756 | LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
|
|---|
| 1757 | mv $MINDI_TMP/target/* $MINDI_TMP/mpt
|
|---|
| 1758 | if [ $? -ne 0 ] ; then
|
|---|
| 1759 | LogFile "--------------------------------"
|
|---|
| 1760 | LogFile "INFO: Size of $MINDI_TMP/mpt:"
|
|---|
| 1761 | du -sk $MINDI_TMP/mpt/* >> $LOGFILE
|
|---|
| 1762 | LogFile "--------------------------------"
|
|---|
| 1763 | sync
|
|---|
| 1764 | umount $MINDI_TMP/mpt
|
|---|
| 1765 | LogAll "ERROR: Problems while creating boot media."
|
|---|
| 1766 | LogAll " Please unload some of your modules and try again."
|
|---|
| 1767 | Die " Try using another temporary directory instead of $MINDI_TMP"
|
|---|
| 1768 | fi
|
|---|
| 1769 |
|
|---|
| 1770 | if [ "$target" = "ISO" ]; then
|
|---|
| 1771 | if [ "$ARCH" != "ia64" ]; then
|
|---|
| 1772 | ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
|
|---|
| 1773 | fi
|
|---|
| 1774 | # ISO
|
|---|
| 1775 | if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
|
|---|
| 1776 | CMD="$ISO_CMD $ISO_OPT"
|
|---|
| 1777 | MakeISO
|
|---|
| 1778 | else
|
|---|
| 1779 | if [ "$ARCH" = "ia64" ]; then
|
|---|
| 1780 | CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
|
|---|
| 1781 | else
|
|---|
| 1782 | # UEFI
|
|---|
| 1783 | echo "$CMD" | grep -q "xorriso"
|
|---|
| 1784 | if [ $? -eq 0 ]; then
|
|---|
| 1785 | XOV=`xorriso --version 2>&1 | head -1 | awk '{print $3}'`
|
|---|
| 1786 | XOVMAJ=`echo $XOV | cut -d. -f1`
|
|---|
| 1787 | XOVMIN=`echo $XOV | cut -d. -f2`
|
|---|
| 1788 | if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
|
|---|
| 1789 | CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
|
|---|
| 1790 | else
|
|---|
| 1791 | CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
|
|---|
| 1792 | fi
|
|---|
| 1793 | else
|
|---|
| 1794 | CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
|
|---|
| 1795 | fi
|
|---|
| 1796 | fi
|
|---|
| 1797 | fi
|
|---|
| 1798 | fi
|
|---|
| 1799 |
|
|---|
| 1800 | # Avoids graphical tool to keep the FS mounted
|
|---|
| 1801 | sync
|
|---|
| 1802 | umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
|
|---|
| 1803 |
|
|---|
| 1804 | if [ "$target" = "ISO" ]; then
|
|---|
| 1805 | cp $part $MINDI_CACHE
|
|---|
| 1806 | if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
|
|---|
| 1807 | # Mount again !
|
|---|
| 1808 | LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
|
|---|
| 1809 | mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
|
|---|
| 1810 | # We just need the EFI dir and the boot image for this case
|
|---|
| 1811 | mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
|
|---|
| 1812 | mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
|
|---|
| 1813 | # We need again the kernel+initrd at the root for UEFI boot at least
|
|---|
| 1814 | cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
|
|---|
| 1815 | # We need the boot image now and what mindi needs at restore time as well
|
|---|
| 1816 | cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
|
|---|
| 1817 | # Avoids graphical tool to keep the FS mounted
|
|---|
| 1818 | sync
|
|---|
| 1819 | umount $MINDI_TMP/mpt2
|
|---|
| 1820 | LogFile "----------- target dir content -----------"
|
|---|
| 1821 | LogFile "------------------------------------------"
|
|---|
| 1822 | ls -lR $MINDI_TMP/mpt >> $LOGFILE
|
|---|
| 1823 | LogFile "------------------------------------------"
|
|---|
| 1824 | MakeISO
|
|---|
| 1825 | fi
|
|---|
| 1826 | else
|
|---|
| 1827 | # USB
|
|---|
| 1828 | if [ "$ARCH" != "ia64" ] ; then
|
|---|
| 1829 | syslinux -v 2>&1 | grep -q 4.02
|
|---|
| 1830 | if [ $? -eq 0 ]; then
|
|---|
| 1831 | # This buggy version of syslinux requires a call to --stupid and not -s
|
|---|
| 1832 | syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
|
|---|
| 1833 | res=$?
|
|---|
| 1834 | else
|
|---|
| 1835 | syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
|
|---|
| 1836 | res=$?
|
|---|
| 1837 | fi
|
|---|
| 1838 | if [ $res -ne 0 ] ; then
|
|---|
| 1839 | LogAll "----------- syslinux's errors --------------"
|
|---|
| 1840 | cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
|
|---|
| 1841 | LogAll "------------------------------------------"
|
|---|
| 1842 | LogAll "ERROR: Failed to create USB image."
|
|---|
| 1843 | else
|
|---|
| 1844 | LogFile "INFO: Created bootable USB image on $USBDEVICE"
|
|---|
| 1845 | fi
|
|---|
| 1846 | rm -f $MINDI_TMP/syslinux.log
|
|---|
| 1847 | else
|
|---|
| 1848 | LogAll "ERROR: No USB boot support for ia64"
|
|---|
| 1849 | MindiExit -1
|
|---|
| 1850 | fi
|
|---|
| 1851 | fi
|
|---|
| 1852 | }
|
|---|
| 1853 |
|
|---|
| 1854 |
|
|---|
| 1855 | OfferToMakeBootableUSB() {
|
|---|
| 1856 |
|
|---|
| 1857 | local i files
|
|---|
| 1858 |
|
|---|
| 1859 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
|
|---|
| 1860 | echo -en "\nShall I make a bootable USB device ? (y/[n]) "
|
|---|
| 1861 | read i
|
|---|
| 1862 | [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
|
|---|
| 1863 | if [ "$USBDEVICE" = "" ]; then
|
|---|
| 1864 | echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
|
|---|
| 1865 | read dev
|
|---|
| 1866 | USBDEVICE=$dev
|
|---|
| 1867 | fi
|
|---|
| 1868 | echo "WARNING: This will erase all content on $USBDEVICE"
|
|---|
| 1869 | echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
|
|---|
| 1870 | read i
|
|---|
| 1871 | [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
|
|---|
| 1872 | else
|
|---|
| 1873 | if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
|
|---|
| 1874 | Die "No USBDEVICE environment variable declared, aborting"
|
|---|
| 1875 | fi
|
|---|
| 1876 | fi
|
|---|
| 1877 | USBPART="${USBDEVICE}1"
|
|---|
| 1878 |
|
|---|
| 1879 | MakeBootableDevice USB
|
|---|
| 1880 | }
|
|---|
| 1881 |
|
|---|
| 1882 |
|
|---|
| 1883 | OfferToMakeBootableISO() {
|
|---|
| 1884 |
|
|---|
| 1885 | local i files
|
|---|
| 1886 |
|
|---|
| 1887 | if [ -z "$ISO_CMD" ]; then
|
|---|
| 1888 | LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
|
|---|
| 1889 | return
|
|---|
| 1890 | fi
|
|---|
| 1891 |
|
|---|
| 1892 | if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
|
|---|
| 1893 | echo -en "\nShall I make a bootable CD image? (y/[n]) "
|
|---|
| 1894 | read i
|
|---|
| 1895 | [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
|
|---|
| 1896 | fi
|
|---|
| 1897 |
|
|---|
| 1898 | MakeBootableDevice ISO
|
|---|
| 1899 | }
|
|---|
| 1900 |
|
|---|
| 1901 |
|
|---|
| 1902 | MakeMessageFile() {
|
|---|
| 1903 |
|
|---|
| 1904 | if [ -x "/bin/lsb_release" ]; then
|
|---|
| 1905 | DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
|
|---|
| 1906 | elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
|
|---|
| 1907 | DESC="Arch Linux"
|
|---|
| 1908 | if [ -r /var/log/pacman.log ]; then
|
|---|
| 1909 | # there are no releases but we can get the last system upgrade
|
|---|
| 1910 | # Output example: Arch Linux [2011-03-03 01:39]
|
|---|
| 1911 | DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
|
|---|
| 1912 | fi
|
|---|
| 1913 | elif [ -x "/etc/os-release" ]; then
|
|---|
| 1914 | DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
|
|---|
| 1915 | elif [ -x "/usr/bin/pbdistrocheck" ]; then
|
|---|
| 1916 | # For pb >= 0.9.8
|
|---|
| 1917 | DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
|
|---|
| 1918 | elif [ -r /etc/issue.net ]; then
|
|---|
| 1919 | DESC=`head -1 /etc/issue.net`
|
|---|
| 1920 | elif [ -r /etc/issue ]; then
|
|---|
| 1921 | DESC=`head -1 /etc/issue`
|
|---|
| 1922 | else
|
|---|
| 1923 | DESC="Unknown desc"
|
|---|
| 1924 | fi
|
|---|
| 1925 | sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
|
|---|
| 1926 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 1927 | if [ "$CDRECOVERY" != "yes" ] ; then
|
|---|
| 1928 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
|---|
| 1929 | echo -en "Press <0eenter07> for 0cnetwork restore07\n"
|
|---|
| 1930 | echo -en "$BOOT_MEDIA_MESSAGE"
|
|---|
| 1931 | elif [ ! "$MINDI_TMP" ] ; then
|
|---|
| 1932 | echo -en "FYI, this is _not_ a MondoRescue CD.\n"
|
|---|
| 1933 | if [ -e "$MINDI_LIB/memtest.img" ] ; then
|
|---|
| 1934 | echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
|
|---|
| 1935 | fi
|
|---|
| 1936 | else
|
|---|
| 1937 | echo -en "$BOOT_MEDIA_MESSAGE"
|
|---|
| 1938 | fi
|
|---|
| 1939 | else
|
|---|
| 1940 | echo -en "\
|
|---|
| 1941 | To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
|
|---|
| 1942 | CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
|
|---|
| 1943 | fi
|
|---|
| 1944 | fi
|
|---|
| 1945 |
|
|---|
| 1946 | # Also create the other help screens
|
|---|
| 1947 | head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
|
|---|
| 1948 | head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
|
|---|
| 1949 | head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
|
|---|
| 1950 | }
|
|---|
| 1951 |
|
|---|
| 1952 |
|
|---|
| 1953 | MakeBootConfFile() {
|
|---|
| 1954 | local options i ooo
|
|---|
| 1955 | options=""
|
|---|
| 1956 | # Type of boot file (elilo or syslinux/isolinux)
|
|---|
| 1957 | type=$1
|
|---|
| 1958 | if [ "$type" = "elilo" ] || [ "$type" = "grub2" ]; then
|
|---|
| 1959 | sep="="
|
|---|
| 1960 | sepdef="="
|
|---|
| 1961 | else
|
|---|
| 1962 | sep=" "
|
|---|
| 1963 | sepdef=" "
|
|---|
| 1964 | fi
|
|---|
| 1965 |
|
|---|
| 1966 | # Generic header for conf file
|
|---|
| 1967 | if [ "$type" = "elilo" ]; then
|
|---|
| 1968 | echo -en "prompt\n"
|
|---|
| 1969 | elif [ "$type" = "grub" ]; then
|
|---|
| 1970 | echo -en "pause Press a key when ready to restore\n"
|
|---|
| 1971 | elif [ "$type" = "grub2" ]; then
|
|---|
| 1972 | echo -en "set "
|
|---|
| 1973 | else
|
|---|
| 1974 | # syslinux family
|
|---|
| 1975 | echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
|
|---|
| 1976 | fi
|
|---|
| 1977 |
|
|---|
| 1978 | # Compute which default option to boot from
|
|---|
| 1979 | echo -en "default${sepdef}"
|
|---|
| 1980 | if [ "$CDRECOVERY" = "yes" ] ; then
|
|---|
| 1981 | if [ "$type" = "grub" ]; then
|
|---|
| 1982 | # TODO: Which num ???
|
|---|
| 1983 | echo -en "0\n"
|
|---|
| 1984 | else
|
|---|
| 1985 | echo -en "RESTORE\n"
|
|---|
| 1986 | fi
|
|---|
| 1987 | # In case it's mondoarchive
|
|---|
| 1988 | elif [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 1989 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
|---|
| 1990 | if [ "$type" = "grub" ]; then
|
|---|
| 1991 | echo -en "3\n"
|
|---|
| 1992 | else
|
|---|
| 1993 | echo -en "iso\n"
|
|---|
| 1994 | fi
|
|---|
| 1995 | else
|
|---|
| 1996 | if [ "$type" = "grub" ]; then
|
|---|
| 1997 | echo -en "1\n"
|
|---|
| 1998 | else
|
|---|
| 1999 | echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
|
|---|
| 2000 | fi
|
|---|
| 2001 | fi
|
|---|
| 2002 | else
|
|---|
| 2003 | if [ "$type" = "grub" ]; then
|
|---|
| 2004 | echo -en "0\n"
|
|---|
| 2005 | else
|
|---|
| 2006 | echo -en "expert\n"
|
|---|
| 2007 | fi
|
|---|
| 2008 | fi
|
|---|
| 2009 |
|
|---|
| 2010 | # Handle timeout
|
|---|
| 2011 | if [ "$type" = "grub2" ]; then
|
|---|
| 2012 | seppref="set "
|
|---|
| 2013 | else
|
|---|
| 2014 | seppref=""
|
|---|
| 2015 | fi
|
|---|
| 2016 | if [ "$CDRECOVERY" = "yes" ] ; then
|
|---|
| 2017 | echo -en "${seppref}timeout${sep}10000\n"
|
|---|
| 2018 | else
|
|---|
| 2019 | echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
|
|---|
| 2020 | fi
|
|---|
| 2021 | echo -en "\n"
|
|---|
| 2022 |
|
|---|
| 2023 | # prepare which labels will be generated
|
|---|
| 2024 | if [ "$CDRECOVERY" = "yes" ] ; then
|
|---|
| 2025 | options="RESTORE expert"
|
|---|
| 2026 | else
|
|---|
| 2027 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 2028 | options="interactive expert compare iso nuke isonuke"
|
|---|
| 2029 | else
|
|---|
| 2030 | options="expert"
|
|---|
| 2031 | fi
|
|---|
| 2032 | fi
|
|---|
| 2033 |
|
|---|
| 2034 | # Generate rest of conf file
|
|---|
| 2035 | for i in $options ; do
|
|---|
| 2036 | ooo=$i
|
|---|
| 2037 | [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
|
|---|
| 2038 | if [ "$type" = "elilo" ]; then
|
|---|
| 2039 | outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
|
|---|
| 2040 | elif [ "$type" = "grub" ]; then
|
|---|
| 2041 | outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
|
|---|
| 2042 | elif [ "$type" = "grub2" ]; then
|
|---|
| 2043 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
|---|
| 2044 | lorder="linuxefi"
|
|---|
| 2045 | iorder="initrdefi"
|
|---|
| 2046 | else
|
|---|
| 2047 | lorder="linux"
|
|---|
| 2048 | iorder="initrd"
|
|---|
| 2049 | fi
|
|---|
| 2050 | outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
|
|---|
| 2051 | else
|
|---|
| 2052 | ps="/"
|
|---|
| 2053 | if [ $KERNEL_IS_XEN = "no" ]; then
|
|---|
| 2054 | outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
|
|---|
| 2055 | else
|
|---|
| 2056 | outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
|
|---|
| 2057 | fi
|
|---|
| 2058 | fi
|
|---|
| 2059 | echo -en "$outstr"
|
|---|
| 2060 | done
|
|---|
| 2061 | if [ -e "$MINDI_LIB/memtest.img" ] ; then
|
|---|
| 2062 | if [ "$type" = "elilo" ]; then
|
|---|
| 2063 | echo -en "image=/memtest.bin\n\tlabel=memtest\n"
|
|---|
| 2064 | echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
|
|---|
| 2065 | elif [ "$type" = "grub" ]; then
|
|---|
| 2066 | echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
|
|---|
| 2067 | elif [ "$type" = "grub2" ]; then
|
|---|
| 2068 | echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
|
|---|
| 2069 | else
|
|---|
| 2070 | ps="/"
|
|---|
| 2071 | if [ "$type" = "syslinux" ]; then
|
|---|
| 2072 | ps=""
|
|---|
| 2073 | fi
|
|---|
| 2074 | echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
|
|---|
| 2075 | echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
|
|---|
| 2076 | fi
|
|---|
| 2077 | fi
|
|---|
| 2078 | }
|
|---|
| 2079 |
|
|---|
| 2080 | ParseModprobeForIncludes() {
|
|---|
| 2081 | local MODPROBE_CONF mpincfile includes include
|
|---|
| 2082 |
|
|---|
| 2083 | MODPROBE_CONF=/etc/modprobe.conf
|
|---|
| 2084 | mpincfile=$1
|
|---|
| 2085 | touch $mpincfile
|
|---|
| 2086 | if [ -a $MODPROBE_CONF ]; then
|
|---|
| 2087 | includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
|
|---|
| 2088 | if [ -n "$includes" ]; then
|
|---|
| 2089 | for include in $includes
|
|---|
| 2090 | do
|
|---|
| 2091 | if [ -a "$include" ]; then
|
|---|
| 2092 | echo $include >> $mpincfile
|
|---|
| 2093 | fi
|
|---|
| 2094 | done
|
|---|
| 2095 | fi
|
|---|
| 2096 | fi
|
|---|
| 2097 | }
|
|---|
| 2098 |
|
|---|
| 2099 | PrepareBootDir() {
|
|---|
| 2100 |
|
|---|
| 2101 | local detect
|
|---|
| 2102 | # Needs a bigdir variable setup before calling it
|
|---|
| 2103 |
|
|---|
| 2104 | # copy (e)lilo/isolinux/grub/whatever stuff into it as well
|
|---|
| 2105 | # to get it on the media (in addition to the boot part
|
|---|
| 2106 | # and also to support UEFI boot mechanism
|
|---|
| 2107 | if [ "$boottype" != "" ]; then
|
|---|
| 2108 | detect="no"
|
|---|
| 2109 | else
|
|---|
| 2110 | detect="yes"
|
|---|
| 2111 | boottype=syslinux
|
|---|
| 2112 | fi
|
|---|
| 2113 | bootdir=$bigdir/$boottype
|
|---|
| 2114 | bootconf="$bootdir/$boottype.cfg"
|
|---|
| 2115 | mkdir -p $bootdir
|
|---|
| 2116 | FindLdlinux32Binary
|
|---|
| 2117 |
|
|---|
| 2118 | if [ "$BOOT_TYPE" != "BIOS" ]; then
|
|---|
| 2119 | if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
|
|---|
| 2120 | LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
|
|---|
| 2121 | MindiExit -1
|
|---|
| 2122 | fi
|
|---|
| 2123 |
|
|---|
| 2124 | mountefi=0
|
|---|
| 2125 | # EFI or UEFI
|
|---|
| 2126 | # TODO: names are hard-coded for now
|
|---|
| 2127 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
|---|
| 2128 | # UEFI
|
|---|
| 2129 | efidir=$bigdir/EFI/BOOT
|
|---|
| 2130 | # Auto-detection if needed
|
|---|
| 2131 | if [ $detect = "yes" ]; then
|
|---|
| 2132 |
|
|---|
| 2133 | # mount /boot/efi if needed
|
|---|
| 2134 | df -T | grep /boot/efi | grep -qE 'vfat'
|
|---|
| 2135 | if [ $? -ne 0 ]; then
|
|---|
| 2136 | mount /boot/efi
|
|---|
| 2137 | if [ $? -ne 0 ]; then
|
|---|
| 2138 | echo "ERROR: You have to mount your (U)EFI partition when using mindi"
|
|---|
| 2139 | MindiExit -1
|
|---|
| 2140 | fi
|
|---|
| 2141 | mountefi=1
|
|---|
| 2142 | fi
|
|---|
| 2143 |
|
|---|
| 2144 | # On RHEL6 grub works
|
|---|
| 2145 | dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
|
|---|
| 2146 | dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
|
|---|
| 2147 | if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
|
|---|
| 2148 | boottype=grub
|
|---|
| 2149 | elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
|
|---|
| 2150 | boottype=grub2
|
|---|
| 2151 | elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
|
|---|
| 2152 | boottype=grub2
|
|---|
| 2153 | elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
|
|---|
| 2154 | boottype=grub2
|
|---|
| 2155 | else
|
|---|
| 2156 | # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
|
|---|
| 2157 | boottype=syslinux
|
|---|
| 2158 | fi
|
|---|
| 2159 | fi
|
|---|
| 2160 | if [ "$boottype" = "syslinux" ]; then
|
|---|
| 2161 | if [ ! "$bootbin" ]; then
|
|---|
| 2162 | FindSyslinux64EFI
|
|---|
| 2163 | bootbin=$SYSLINUX64EFI
|
|---|
| 2164 | fi
|
|---|
| 2165 | bootconf="$efidir/syslinux.cfg"
|
|---|
| 2166 | elif [ "$boottype" = "grub" ]; then
|
|---|
| 2167 | if [ ! "$bootbin" ]; then
|
|---|
| 2168 | bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
|
|---|
| 2169 | fi
|
|---|
| 2170 | bootconf="$efidir/BOOTX64.conf"
|
|---|
| 2171 | elif [ "$boottype" = "grub2" ]; then
|
|---|
| 2172 | if [ ! "$bootbin" ]; then
|
|---|
| 2173 | bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
|
|---|
| 2174 | fi
|
|---|
| 2175 | bootconf="$efidir/grub.cfg"
|
|---|
| 2176 | fi
|
|---|
| 2177 |
|
|---|
| 2178 | # Depending on the arch, the target boot file is different
|
|---|
| 2179 | if [ "$ARCH" = "x86_64" ] ; then
|
|---|
| 2180 | tgbin="BOOTX64.efi"
|
|---|
| 2181 | elif [ "$ARCH" = "armv8" ]; then
|
|---|
| 2182 | tgbin="BOOTAA64.efi"
|
|---|
| 2183 | else
|
|---|
| 2184 | # i?386
|
|---|
| 2185 | tgbin="BOOTIA32"
|
|---|
| 2186 | fi
|
|---|
| 2187 | else
|
|---|
| 2188 | # EFI
|
|---|
| 2189 | efidir=$bootdir
|
|---|
| 2190 | bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
|
|---|
| 2191 | tgbin=$bootbin
|
|---|
| 2192 | boottype=elilo
|
|---|
| 2193 | bootconf="$efidir/elilo.conf"
|
|---|
| 2194 | fi
|
|---|
| 2195 | LogAll "INFO: Found $boottype boot type"
|
|---|
| 2196 | mkdir -p $efidir
|
|---|
| 2197 | cp $bootbin $efidir/$tgbin
|
|---|
| 2198 |
|
|---|
| 2199 | if [ $mountefi -eq 1 ]; then
|
|---|
| 2200 | umount /boot/efi 2>&1 > /dev/null
|
|---|
| 2201 | fi
|
|---|
| 2202 |
|
|---|
| 2203 | if [ $boottype = "syslinux" ]; then
|
|---|
| 2204 | FindLdlinuxe64Binary
|
|---|
| 2205 | if [ -e "$LDLINUXE64" ]; then
|
|---|
| 2206 | LogFile "INFO: Copying $LDLINUXE64 to $efidir"
|
|---|
| 2207 | cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
|
|---|
| 2208 | cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
|
|---|
| 2209 | if [ -e $LDLINUXE64/../isolinux.c32 ]; then
|
|---|
| 2210 | cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
|
|---|
| 2211 | fi
|
|---|
| 2212 | fi
|
|---|
| 2213 | fi
|
|---|
| 2214 | # tgdir for syslinux
|
|---|
| 2215 | tgdir=$bigdir/EFI
|
|---|
| 2216 | else
|
|---|
| 2217 | # tgdir for syslinux
|
|---|
| 2218 | tgdir=$bootdir
|
|---|
| 2219 | fi
|
|---|
| 2220 | # In all cases prepare syslinux content for BIOS mode
|
|---|
| 2221 | # so that we can have multi boot mode media BIOS+UEFI
|
|---|
| 2222 | # Useful for syslinux 5.x
|
|---|
| 2223 | if [ -e "$LDLINUXC32" ]; then
|
|---|
| 2224 | LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
|
|---|
| 2225 | cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
|
|---|
| 2226 | fi
|
|---|
| 2227 | if [ -e $LDLINUXC32/../isolinux.c32 ]; then
|
|---|
| 2228 | LogFile "INFO: Copying isolinux.c32 to $tgdir"
|
|---|
| 2229 | cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
|
|---|
| 2230 | fi
|
|---|
| 2231 |
|
|---|
| 2232 | MakeBootConfFile $boottype > $bootconf
|
|---|
| 2233 | LogFile "Boot Conf file $bootconf content is:"
|
|---|
| 2234 | LogFile "------------------------------------"
|
|---|
| 2235 | cat $bootconf >> $LOGFILE
|
|---|
| 2236 | LogFile "------------------------------------"
|
|---|
| 2237 | if [ "$BOOT_TYPE" = "UEFI" ]; then
|
|---|
| 2238 | # Also generate the syslinux conf
|
|---|
| 2239 | MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
|
|---|
| 2240 | LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
|
|---|
| 2241 | LogFile "---------------------------------------------------"
|
|---|
| 2242 | cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
|
|---|
| 2243 | LogFile "---------------------------------------------------"
|
|---|
| 2244 | fi
|
|---|
| 2245 |
|
|---|
| 2246 | }
|
|---|
| 2247 |
|
|---|
| 2248 | PrepareBigDirTar() {
|
|---|
| 2249 | echo -en "INFO: Tarring and zipping the data content..."
|
|---|
| 2250 | (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
|
|---|
| 2251 | LogFile "Size of the data content"
|
|---|
| 2252 | LogFile "------------------------"
|
|---|
| 2253 | du -sk $MINDI_CACHE/*gz >> $LOGFILE
|
|---|
| 2254 | LogFile "------------------------"
|
|---|
| 2255 | echo -e "$DONE"
|
|---|
| 2256 |
|
|---|
| 2257 | }
|
|---|
| 2258 |
|
|---|
| 2259 | CleanBigDir() {
|
|---|
| 2260 | [ "$bigdir" != "/" ] && echo $bigdir | grep -vq $MINDI_TMP && rm -rf $bigdir
|
|---|
| 2261 | }
|
|---|
| 2262 |
|
|---|
| 2263 | PrepareBigDir() {
|
|---|
| 2264 | local needlist diskdir res i j k lines lfiles includefile
|
|---|
| 2265 |
|
|---|
| 2266 | rm -f $MINDI_CACHE/mindi.iso
|
|---|
| 2267 | needlist=$MINDI_TMP/what-we-need.txt
|
|---|
| 2268 | mkdir -p $bigdir/usr/bin
|
|---|
| 2269 | mkdir -p $bigdir/usr/sbin
|
|---|
| 2270 | includefile=$MINDI_TMP/$$.includefile.txt
|
|---|
| 2271 |
|
|---|
| 2272 | lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
|
|---|
| 2273 | if [ -e "$DEPLIST_FILE" ]; then
|
|---|
| 2274 | lfiles="$DEPLIST_FILE $lfiles"
|
|---|
| 2275 | fi
|
|---|
| 2276 | lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
|
|---|
| 2277 | ParseModprobeForIncludes $includefile
|
|---|
| 2278 | lines=$(($lines+`cat $includefile | wc -l`))
|
|---|
| 2279 | cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
|
|---|
| 2280 | res=$?
|
|---|
| 2281 | rm -f $includefile
|
|---|
| 2282 | ListKernelModulePaths >> $needlist
|
|---|
| 2283 | if [ "$res" -ne "0" ] ; then
|
|---|
| 2284 | Die "You have $res files present in dependency list\nbut absent from filesystem."
|
|---|
| 2285 | fi
|
|---|
| 2286 | mkdir -p $bigdir/tmp
|
|---|
| 2287 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 2288 | # TODO: no reason to have the cfg file stored twice
|
|---|
| 2289 | MakeMondoConfigFile $MINDI_TMP/$MRCFG
|
|---|
| 2290 | cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
|
|---|
| 2291 | fi
|
|---|
| 2292 |
|
|---|
| 2293 | # Needs to be done after the MRCFG creation
|
|---|
| 2294 | FindAndAddUserKeyboardMappingFile
|
|---|
| 2295 |
|
|---|
| 2296 | [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
|
|---|
| 2297 | DropOptimizedLibraries $needlist $bigdir
|
|---|
| 2298 | echo -en "INFO: Assembling dependency files"
|
|---|
| 2299 |
|
|---|
| 2300 | CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
|
|---|
| 2301 | rm -f $needlist
|
|---|
| 2302 | echo -e "$DONE"
|
|---|
| 2303 |
|
|---|
| 2304 | # also copy io.sys and msdos.sys, if we can find them
|
|---|
| 2305 | for i in `mount | cut -d' ' -f3` ; do
|
|---|
| 2306 | for j in io.sys msdos.sys ; do
|
|---|
| 2307 | [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
|
|---|
| 2308 | done
|
|---|
| 2309 | done
|
|---|
| 2310 |
|
|---|
| 2311 | # master boot record, too
|
|---|
| 2312 | i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
|
|---|
| 2313 | if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
|
|---|
| 2314 | LogAll "INFO: Backing up $i's MBR"
|
|---|
| 2315 | dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
|
|---|
| 2316 | sleep 1
|
|---|
| 2317 | sync
|
|---|
| 2318 | j=$i
|
|---|
| 2319 | [ -h "$j" ] && j=`readlink -f $j`
|
|---|
| 2320 | LogAll "INFO: Creating /dev/boot_device ($j)"
|
|---|
| 2321 | mkdir -p $bigdir/dev
|
|---|
| 2322 | cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
|
|---|
| 2323 | fi
|
|---|
| 2324 |
|
|---|
| 2325 | # Get terminfo content
|
|---|
| 2326 | ti="usr/share/terminfo/l"
|
|---|
| 2327 | if [ -d /$ti ]; then
|
|---|
| 2328 | mkdir -p $bigdir/$ti
|
|---|
| 2329 | cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
|
|---|
| 2330 | fi
|
|---|
| 2331 | if [ -e "$MONDO_SHARE/restore-scripts" ]; then
|
|---|
| 2332 | cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
|
|---|
| 2333 | [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
|
|---|
| 2334 | cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
|
|---|
| 2335 | fi
|
|---|
| 2336 | if [ -d "/lib/dev-state" ]; then
|
|---|
| 2337 | cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
|
|---|
| 2338 | fi
|
|---|
| 2339 | MakeMountlist $MINDI_TMP/mountlist.txt
|
|---|
| 2340 | CheckMountlist $MINDI_TMP/mountlist.txt
|
|---|
| 2341 | mkdir -p $bigdir/tmp
|
|---|
| 2342 | cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
|
|---|
| 2343 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 2344 | cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
|
|---|
| 2345 | fi
|
|---|
| 2346 | if [ $LVM != "false" ]; then
|
|---|
| 2347 | $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
|
|---|
| 2348 | if [ $? -ne 0 ]; then
|
|---|
| 2349 | LVM="false"
|
|---|
| 2350 | rm -f $bigdir/tmp/i-want-my-lvm
|
|---|
| 2351 | else
|
|---|
| 2352 | LogFile "Your i-want-my-lvm file content is:"
|
|---|
| 2353 | LogFile "-----------------------------------"
|
|---|
| 2354 | cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
|
|---|
| 2355 | LogFile "-----------------------------------"
|
|---|
| 2356 | fi
|
|---|
| 2357 | fi
|
|---|
| 2358 | LogFile "INFO: Your mountlist.txt file content is:"
|
|---|
| 2359 | LogFile "-----------------------------------"
|
|---|
| 2360 | cat $bigdir/tmp/mountlist.txt >> $LOGFILE
|
|---|
| 2361 | LogFile "-----------------------------------"
|
|---|
| 2362 |
|
|---|
| 2363 | echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
|
|---|
| 2364 | echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
|
|---|
| 2365 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 2366 | for q in filelist.full.gz biggielist.txt ; do
|
|---|
| 2367 | [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
|
|---|
| 2368 | cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
|
|---|
| 2369 | done
|
|---|
| 2370 | fi
|
|---|
| 2371 |
|
|---|
| 2372 | PrepareBootDir
|
|---|
| 2373 |
|
|---|
| 2374 | }
|
|---|
| 2375 |
|
|---|
| 2376 |
|
|---|
| 2377 | Prompt() {
|
|---|
| 2378 | echo -en "$1"
|
|---|
| 2379 | read line
|
|---|
| 2380 | }
|
|---|
| 2381 |
|
|---|
| 2382 |
|
|---|
| 2383 | ReadLine() {
|
|---|
| 2384 | local i incoming
|
|---|
| 2385 | read incoming
|
|---|
| 2386 | i=0
|
|---|
| 2387 | while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
|
|---|
| 2388 | i=$(($i+1))
|
|---|
| 2389 | read incoming
|
|---|
| 2390 | done
|
|---|
| 2391 | echo "$incoming"
|
|---|
| 2392 | }
|
|---|
| 2393 |
|
|---|
| 2394 |
|
|---|
| 2395 | SizeOfPartition() {
|
|---|
| 2396 | local devpath drive res stub
|
|---|
| 2397 | device=$1
|
|---|
| 2398 | if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
|
|---|
| 2399 | Die "Cannot find $device's size - is your /etc/fstab sane?"
|
|---|
| 2400 | fi
|
|---|
| 2401 | if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
|
|---|
| 2402 | res=`SizeOfRaidPartition $device`
|
|---|
| 2403 | [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
|
|---|
| 2404 | echo "$res"
|
|---|
| 2405 | return 0
|
|---|
| 2406 | fi
|
|---|
| 2407 | # patch from Bill <bill@iwizard.biz> - 2003/08/25
|
|---|
| 2408 | res=`$FDISK -s $device 2>> $LOGFILE`
|
|---|
| 2409 | # end patch
|
|---|
| 2410 | # take only the first in case of multiple mount (cifs, nfs, ...)
|
|---|
| 2411 | [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
|
|---|
| 2412 | [ "$res" = "" ] && res="-1"
|
|---|
| 2413 | echo $res
|
|---|
| 2414 | return 0
|
|---|
| 2415 | }
|
|---|
| 2416 |
|
|---|
| 2417 |
|
|---|
| 2418 | SizeOfRaidPartition() {
|
|---|
| 2419 | local real_dev smallest_size silly tmp
|
|---|
| 2420 |
|
|---|
| 2421 | silly=999999999
|
|---|
| 2422 | smallest_size=$silly
|
|---|
| 2423 |
|
|---|
| 2424 | for real_dev in `GetRaidDevMembers $1` ; do
|
|---|
| 2425 | tmp=`SizeOfPartition $real_dev`
|
|---|
| 2426 | [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
|
|---|
| 2427 | done
|
|---|
| 2428 |
|
|---|
| 2429 | if [ "$smallest_size" = "$silly" ] ; then
|
|---|
| 2430 | echo "-1"
|
|---|
| 2431 | return 1
|
|---|
| 2432 | else
|
|---|
| 2433 | echo "$smallest_size"
|
|---|
| 2434 | return 0
|
|---|
| 2435 | fi
|
|---|
| 2436 | }
|
|---|
| 2437 |
|
|---|
| 2438 |
|
|---|
| 2439 | StripExecutable()
|
|---|
| 2440 | {
|
|---|
| 2441 | local tmpfile
|
|---|
| 2442 |
|
|---|
| 2443 | tmpfile=$MINDI_TMP/stripped.$$.dat
|
|---|
| 2444 | [ -d "$1" ] || [ -h "$1" ] && return
|
|---|
| 2445 | cp -f $1 $tmpfile 2>> $LOGFILE
|
|---|
| 2446 | strip $tmpfile 2> /dev/null
|
|---|
| 2447 | if [ $? -eq 0 ] ; then
|
|---|
| 2448 | cp -f $tmpfile $1 2>> $LOGFILE
|
|---|
| 2449 | LogFile "INFO: Stripped binary $2"
|
|---|
| 2450 | fi
|
|---|
| 2451 | rm -f $tmpfile
|
|---|
| 2452 | }
|
|---|
| 2453 |
|
|---|
| 2454 | KernelVer() {
|
|---|
| 2455 | local fkern_ver fname
|
|---|
| 2456 |
|
|---|
| 2457 | fname=$1
|
|---|
| 2458 | file $fname | grep -q gzip
|
|---|
| 2459 | if [ $? -eq 0 ] ; then
|
|---|
| 2460 | # Used by ia64
|
|---|
| 2461 | fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
|
|---|
| 2462 | else
|
|---|
| 2463 | fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
|
|---|
| 2464 | fi
|
|---|
| 2465 | echo "$fkern_ver"
|
|---|
| 2466 | }
|
|---|
| 2467 |
|
|---|
| 2468 |
|
|---|
| 2469 | # WARNING: This function should just echo the final result !!!
|
|---|
| 2470 | #
|
|---|
| 2471 | TryToFindKernelPath() {
|
|---|
| 2472 | local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
|
|---|
| 2473 |
|
|---|
| 2474 | we_want_version=$KERVERRUN
|
|---|
| 2475 | possible_kernels=""
|
|---|
| 2476 | duff_kernels=""
|
|---|
| 2477 | output=""
|
|---|
| 2478 |
|
|---|
| 2479 | if [ "$ARCH" = "ia64" ] ; then
|
|---|
| 2480 | root="/boot/efi/efi"
|
|---|
| 2481 | else
|
|---|
| 2482 | root="/"
|
|---|
| 2483 | fi
|
|---|
| 2484 | # See if we're booted from a Xen kernel
|
|---|
| 2485 | # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
|
|---|
| 2486 | if [ -f /proc/xen/capabilities ]; then
|
|---|
| 2487 | # It's a Xen kernel
|
|---|
| 2488 | KERNEL_IS_XEN="yes"
|
|---|
| 2489 | LogFile "INFO: It's a Xen kernel..."
|
|---|
| 2490 | fi
|
|---|
| 2491 |
|
|---|
| 2492 | for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
|
|---|
| 2493 | [ ! -e "$fname" ] && continue
|
|---|
| 2494 | [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
|
|---|
| 2495 | fkern_ver=`KernelVer $fname`
|
|---|
| 2496 | [ "$fkern_ver" = "" ] && continue
|
|---|
| 2497 | [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
|
|---|
| 2498 | [ -f "$fname" ] || continue
|
|---|
| 2499 | [ -h "$fname" ] && continue
|
|---|
| 2500 | kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
|
|---|
| 2501 | file $fname | grep -q gzip
|
|---|
| 2502 | if [ $? -eq 0 ] ; then
|
|---|
| 2503 | # Used by ia64
|
|---|
| 2504 | if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
|
|---|
| 2505 | LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
|
|---|
| 2506 | duff_kernels="$fname $duff_kernels"
|
|---|
| 2507 | else
|
|---|
| 2508 | [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
|
|---|
| 2509 | possible_kernels="$fname $possible_kernels"
|
|---|
| 2510 | fi
|
|---|
| 2511 | else
|
|---|
| 2512 | if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
|
|---|
| 2513 | LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
|
|---|
| 2514 | duff_kernels="$fname $duff_kernels"
|
|---|
| 2515 | else
|
|---|
| 2516 | [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
|
|---|
| 2517 | possible_kernels="$fname $possible_kernels"
|
|---|
| 2518 | fi
|
|---|
| 2519 | fi
|
|---|
| 2520 | done
|
|---|
| 2521 | if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
|
|---|
| 2522 | possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
|
|---|
| 2523 | fi
|
|---|
| 2524 | if [ ! "$possible_kernels" ] ; then
|
|---|
| 2525 | LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
|
|---|
| 2526 | possible_kernels="$duff_kernels"
|
|---|
| 2527 | if [ ! "$possible_kernels" ] ; then
|
|---|
| 2528 | LogAll "INFO: Sorry, no duff kernels either"
|
|---|
| 2529 | else
|
|---|
| 2530 | LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
|
|---|
| 2531 | LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
|
|---|
| 2532 | fi
|
|---|
| 2533 | fi
|
|---|
| 2534 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
|---|
| 2535 | possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
|
|---|
| 2536 | noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
|
|---|
| 2537 | fi
|
|---|
| 2538 | possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
|
|---|
| 2539 | noof_kernels=`CountItemsIn "$possible_kernels"`
|
|---|
| 2540 | if [ "$noof_kernels" -eq "0" ] ; then
|
|---|
| 2541 | LogAll "Could not find your kernel."
|
|---|
| 2542 | if [ -e "/boot/vmlinuz" ] ; then
|
|---|
| 2543 | LogAll "INFO: Using /boot/vmlinuz as a last resort."
|
|---|
| 2544 | output=/boot/vmlinuz
|
|---|
| 2545 | else
|
|---|
| 2546 | output=""
|
|---|
| 2547 | fi
|
|---|
| 2548 | elif [ "$noof_kernels" -eq "1" ] ; then
|
|---|
| 2549 | kp=`echo "$possible_kernels" | sed s/' '//`
|
|---|
| 2550 | LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
|
|---|
| 2551 | output="$kp"
|
|---|
| 2552 | else
|
|---|
| 2553 | for i in $possible_kernels ; do
|
|---|
| 2554 | if [ "`echo $i | grep "$KERVERRUN"`" ]; then
|
|---|
| 2555 | LogAll "INFO: OK, I used my initiative and found that "
|
|---|
| 2556 | LogAll "INFO: $i is probably your kernel. "
|
|---|
| 2557 | output="$i"
|
|---|
| 2558 | break
|
|---|
| 2559 | fi
|
|---|
| 2560 | done
|
|---|
| 2561 | if [ ! -n "$output" ]; then
|
|---|
| 2562 | if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
|
|---|
| 2563 | output=/boot/vmlinuz
|
|---|
| 2564 | LogFile "INFO: Schlomo, this one's for you."
|
|---|
| 2565 | else
|
|---|
| 2566 | LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
|
|---|
| 2567 | LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
|
|---|
| 2568 | LogFile "INFO: $possible_kernels"
|
|---|
| 2569 | output=""
|
|---|
| 2570 | fi
|
|---|
| 2571 | fi
|
|---|
| 2572 | fi
|
|---|
| 2573 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
|---|
| 2574 | if [ "$noof_xenkernels" -eq "0" ]; then
|
|---|
| 2575 | xenkernelpath=""
|
|---|
| 2576 | elif [ "$noof_xenkernels" -eq "1" ]; then
|
|---|
| 2577 | xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
|
|---|
| 2578 | LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
|
|---|
| 2579 | else
|
|---|
| 2580 | for i in $possible_xenkernels ; do
|
|---|
| 2581 | if [ "`echo $i | grep "$KERVERRUN"`" ]; then
|
|---|
| 2582 | LogFile "INFO: OK, I used my initiative and found that "
|
|---|
| 2583 | LogFile "INFO: $i is probably your Xen kernel. "
|
|---|
| 2584 | xenkernelpath="$i"
|
|---|
| 2585 | break
|
|---|
| 2586 | fi
|
|---|
| 2587 | done
|
|---|
| 2588 | if [ ! -n "$xenkernelpath" ]; then
|
|---|
| 2589 | new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
|
|---|
| 2590 | if [ ! -n "$new_possible_xenkernels" ]; then
|
|---|
| 2591 | xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
|
|---|
| 2592 | LogFile "INFO: Using $xenkernelpath"
|
|---|
| 2593 | else
|
|---|
| 2594 | LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
|
|---|
| 2595 | LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
|
|---|
| 2596 | LogFile "INFO: $possible_xenkernels"
|
|---|
| 2597 | output=""
|
|---|
| 2598 | xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
|
|---|
| 2599 | LogFile "INFO: Using $xenkernelpath"
|
|---|
| 2600 | fi
|
|---|
| 2601 | fi
|
|---|
| 2602 | fi
|
|---|
| 2603 | if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
|
|---|
| 2604 | Die "Cannot find Xen kernel $xenkernelpath, aborting"
|
|---|
| 2605 | fi
|
|---|
| 2606 | fi
|
|---|
| 2607 | #LogAll "TryToFindKernelPath found $output"
|
|---|
| 2608 | echo "$output"
|
|---|
| 2609 | }
|
|---|
| 2610 |
|
|---|
| 2611 | CopyFromConf() {
|
|---|
| 2612 |
|
|---|
| 2613 | conf=$1
|
|---|
| 2614 | mp=$2
|
|---|
| 2615 | echo -en "INFO: Gathering dependencies of $conf.conf..."
|
|---|
| 2616 | LogFile "INFO: Gathering dependencies of $conf.conf..."
|
|---|
| 2617 | lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf | sort -u`
|
|---|
| 2618 | noof_lines=`echo $lis2 | wc -w`
|
|---|
| 2619 | progress=0
|
|---|
| 2620 | # Get only the files which exist in that list
|
|---|
| 2621 | # and potentially their symlink structure
|
|---|
| 2622 | # put apart directories for later handling
|
|---|
| 2623 | for f in $lis2; do
|
|---|
| 2624 | if [ -d $f ]; then
|
|---|
| 2625 | for g in `find $f`; do
|
|---|
| 2626 | echo $g >> $MINDI_TMP/$conf.lis
|
|---|
| 2627 | LocateDeps $g >> $MINDI_TMP/$conf.lis2
|
|---|
| 2628 | done
|
|---|
| 2629 | lis3="$lis3 $f"
|
|---|
| 2630 | else
|
|---|
| 2631 | if [ -r $f ]; then
|
|---|
| 2632 | echo $f >> $MINDI_TMP/$conf.lis
|
|---|
| 2633 | LocateDeps $f >> $MINDI_TMP/$conf.lis2
|
|---|
| 2634 | fi
|
|---|
| 2635 | fi
|
|---|
| 2636 | progress=$(($progress+1))
|
|---|
| 2637 | LogProgress $progress $noof_lines
|
|---|
| 2638 | done
|
|---|
| 2639 | echo -e "$DONE"
|
|---|
| 2640 | LogAll "INFO: Processing all dependencies links for $conf.conf..."
|
|---|
| 2641 | # And their deps except dirs
|
|---|
| 2642 | lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
|
|---|
| 2643 | rm -f $MINDI_TMP/$conf.lis2
|
|---|
| 2644 | finallist=""
|
|---|
| 2645 | # Remove directories from the list, as cp will create them anyway
|
|---|
| 2646 | # and it may hurt if /lib is in it as on Debian/Ubuntu
|
|---|
| 2647 | # recent bash says that -d is true for a link to a dir !
|
|---|
| 2648 | for f in $lines; do
|
|---|
| 2649 | if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
|
|---|
| 2650 | # Do not overwrite files already in destination (avoid using option -n of cp not portable)
|
|---|
| 2651 | if [ ! -e "$mp/$f" ]; then
|
|---|
| 2652 | finallist="$finallist $f"
|
|---|
| 2653 | fi
|
|---|
| 2654 | fi
|
|---|
| 2655 | done
|
|---|
| 2656 | # But adds the directory useful in $lis3
|
|---|
| 2657 | fnllist=`echo $finallist $lis3 | tr ' ' '\n' | sort -u | tr '\n' ' '`
|
|---|
| 2658 | LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
|
|---|
| 2659 | cp -a --parents $fnllist -t $mp/ 2> $templog || LogAll "WARNING: Problem in $conf analysis" $templog
|
|---|
| 2660 | rm -f $MINDI_TMP/$conf.lis
|
|---|
| 2661 | }
|
|---|
| 2662 |
|
|---|
| 2663 | PrepareTargetDir() {
|
|---|
| 2664 | local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
|
|---|
| 2665 |
|
|---|
| 2666 | tgz_dir_fname=$MINDI_LIB/rootfs
|
|---|
| 2667 | rdz_fname=$MINDI_TMP/initrd.img
|
|---|
| 2668 | kernelsize=`du -sk $kernelpath | cut -f1`
|
|---|
| 2669 | res=0
|
|---|
| 2670 | templog=$MINDI_TMP/$$.log
|
|---|
| 2671 | > $templog
|
|---|
| 2672 |
|
|---|
| 2673 | mkdir -p $targetdir
|
|---|
| 2674 | # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
|
|---|
| 2675 | for d in bin sbin lib lib64; do
|
|---|
| 2676 | if [ -h "/$d" ]; then
|
|---|
| 2677 | thelink=`readlink /$d`
|
|---|
| 2678 | mkdir -p $targetdir/$thelink || LogAll "ERROR: Unable to create $thelink in $targetdir"
|
|---|
| 2679 | mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
|
|---|
| 2680 | if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
|
|---|
| 2681 | rmdir $targetdir/$d
|
|---|
| 2682 | fi
|
|---|
| 2683 | if [ ! -h $targetdir/$d ]; then
|
|---|
| 2684 | rm -f $targetdir/$d 2> /dev/null
|
|---|
| 2685 | (cd $targetdir ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
|
|---|
| 2686 | fi
|
|---|
| 2687 | fi
|
|---|
| 2688 | done
|
|---|
| 2689 |
|
|---|
| 2690 | LogFile "INFO: what is now in $targetdir"
|
|---|
| 2691 | ls -al $targetdir >> $LOGFILE
|
|---|
| 2692 |
|
|---|
| 2693 | # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
|
|---|
| 2694 | # copy from rootfs into targetdir
|
|---|
| 2695 | LogAll "INFO: Copying Mindi files onto $targetdir"
|
|---|
| 2696 | for f in $tgz_dir_fname/*; do
|
|---|
| 2697 | if [ ! -r $f ]; then
|
|---|
| 2698 | Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
|
|---|
| 2699 | else
|
|---|
| 2700 | cp -af $f $targetdir 2>&1 >> $LOGFILE
|
|---|
| 2701 | fi
|
|---|
| 2702 | done
|
|---|
| 2703 | (cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
|
|---|
| 2704 | # kernel expects linuxrc in ext2 filesystem
|
|---|
| 2705 | (cd $targetdir ; ln -sf usr/sbin/init linuxrc)
|
|---|
| 2706 | # kernel expects init in cpio filesystem
|
|---|
| 2707 | (cd $targetdir ; ln -sf usr/sbin/init init)
|
|---|
| 2708 |
|
|---|
| 2709 | (cd $targetdir/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
|
|---|
| 2710 |
|
|---|
| 2711 | for w in insmod.static insmod.static.old ; do
|
|---|
| 2712 | s=`which $w 2> /dev/null`
|
|---|
| 2713 | if [ -e "$s" ] ; then
|
|---|
| 2714 | tar cf - -C / $s 2> /dev/null | (cd $targetdir ; tar xf -)
|
|---|
| 2715 | fi
|
|---|
| 2716 | done
|
|---|
| 2717 |
|
|---|
| 2718 | [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
|
|---|
| 2719 |
|
|---|
| 2720 | # Copy of files mandatory for ssh to automate mount if sshfs is used
|
|---|
| 2721 | mkdir -p $targetdir/.ssh $targetdir/tmp
|
|---|
| 2722 | cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
|
|---|
| 2723 | cat > $targetdir/tmp/myssh << EOF
|
|---|
| 2724 | ssh -o StrictHostKeyChecking=no \$*
|
|---|
| 2725 | EOF
|
|---|
| 2726 | chmod 755 $targetdir/tmp/myssh
|
|---|
| 2727 |
|
|---|
| 2728 | # Copy of files mandatory for ld.so
|
|---|
| 2729 | cp -a /etc/ld.so.c* $targetdir/etc
|
|---|
| 2730 |
|
|---|
| 2731 | # Handle the case where busybox and mount are dynamically linked
|
|---|
| 2732 | file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically"
|
|---|
| 2733 | if [ $? -eq 0 ]; then
|
|---|
| 2734 | # We want to use the real mount and all the supported variants (nfs, cifs, ...)
|
|---|
| 2735 | rm -f $targetdir/bin/mount
|
|---|
| 2736 | fi
|
|---|
| 2737 |
|
|---|
| 2738 | # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
|
|---|
| 2739 | CopyFromConf minimal $targetdir
|
|---|
| 2740 |
|
|---|
| 2741 | # For older distributions expecting /sbin/init provides it
|
|---|
| 2742 | if [ ! -e "$targetdir/sbin/init" ]; then
|
|---|
| 2743 | (cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
|
|---|
| 2744 | fi
|
|---|
| 2745 |
|
|---|
| 2746 | # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
|
|---|
| 2747 | (cd $targetdir ; ln -sf /bin/bash bin/sh)
|
|---|
| 2748 | LogFile "INFO: Using bash as default shell"
|
|---|
| 2749 |
|
|---|
| 2750 | # Avoids an issue on some distro (RHEL5)
|
|---|
| 2751 | rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
|
|---|
| 2752 |
|
|---|
| 2753 | # Management of DRBD
|
|---|
| 2754 | which drbdadm &> /dev/null
|
|---|
| 2755 | if [ $? -eq 0 ]; then
|
|---|
| 2756 | # Do we find DRBD devices setup
|
|---|
| 2757 | drbdadm sh-dev all | grep -E '^/dev' &> /dev/null
|
|---|
| 2758 | if [ $? -eq 0 ]; then
|
|---|
| 2759 | CopyFromConf drbd $targetdir
|
|---|
| 2760 | fi
|
|---|
| 2761 | # DRBD requires net activation
|
|---|
| 2762 | MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
|
|---|
| 2763 | fi
|
|---|
| 2764 |
|
|---|
| 2765 | # Management of udev (which includes modprobe in rules)
|
|---|
| 2766 | ps auxww | grep -v grep | grep -qw udevd
|
|---|
| 2767 | if [ $? -eq 0 ]; then
|
|---|
| 2768 | echo "udev device manager found" > $targetdir/tmp/USE-UDEV
|
|---|
| 2769 | LogFile "INFO: udev device manager found"
|
|---|
| 2770 | tar cf - -C / /etc/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /etc/udev analysis" $templog
|
|---|
| 2771 | # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
|
|---|
| 2772 | rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
|
|---|
| 2773 | # Do not do it if it's a link (Ubuntu 64 bits #503)
|
|---|
| 2774 | if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
|
|---|
| 2775 | tar cf - -C / /lib64/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
|
|---|
| 2776 | fi
|
|---|
| 2777 | if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
|
|---|
| 2778 | tar cf - -C / /lib32/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
|
|---|
| 2779 | fi
|
|---|
| 2780 | if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
|
|---|
| 2781 | tar cf - -C / /lib/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /lib/udev analysis" $templog
|
|---|
| 2782 | fi
|
|---|
| 2783 | if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
|
|---|
| 2784 | tar cf - -C / /usr/lib/udev 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
|
|---|
| 2785 | fi
|
|---|
| 2786 | if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
|
|---|
| 2787 | CopyFromConf udev $targetdir
|
|---|
| 2788 | else
|
|---|
| 2789 | LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
|
|---|
| 2790 | LogAll " mindi will use static devices which may cause problems"
|
|---|
| 2791 | rm -f $targetdir/tmp/USE-UDEV
|
|---|
| 2792 | fi
|
|---|
| 2793 | fi
|
|---|
| 2794 |
|
|---|
| 2795 | # Management of potential HW info (ProLiant only at the moment)
|
|---|
| 2796 | rm -rf $MINDI_CACHE/bkphw
|
|---|
| 2797 | mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
|
|---|
| 2798 | if [ -d $MINDI_CACHE/bkphw ]; then
|
|---|
| 2799 | LogAll "INFO: Hardware Information found and saved ..."
|
|---|
| 2800 | cp -rp $MINDI_CACHE/bkphw $targetdir
|
|---|
| 2801 | if [ -f $MINDI_CACHE/tools.files ]; then
|
|---|
| 2802 | lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
|
|---|
| 2803 | LocateDeps $lis > $MINDI_TMP/tools.lis
|
|---|
| 2804 | tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
|
|---|
| 2805 | fi
|
|---|
| 2806 | if [ -f $MINDI_CACHE/mindi-rsthw ]; then
|
|---|
| 2807 | mv -f $MINDI_CACHE/mindi-rsthw $targetdir
|
|---|
| 2808 | chmod 755 $targetdir/mindi-rsthw
|
|---|
| 2809 | fi
|
|---|
| 2810 | rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
|
|---|
| 2811 | fi
|
|---|
| 2812 |
|
|---|
| 2813 | # Management of perl scripts delivered needed at restore time
|
|---|
| 2814 | LogAll "INFO: Analyzing perl modules dependencies..."
|
|---|
| 2815 | mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
|
|---|
| 2816 | LogFile "DBG4: Perl Modules found:"
|
|---|
| 2817 | LogFile "-------------------------"
|
|---|
| 2818 | cat $MINDI_TMP/perl.lis >> $LOGFILE
|
|---|
| 2819 | LogFile "-------------------------"
|
|---|
| 2820 | tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
|
|---|
| 2821 |
|
|---|
| 2822 | for w in cdrom groovy-stuff ; do
|
|---|
| 2823 | mkdir -p mnt/$w
|
|---|
| 2824 | done
|
|---|
| 2825 |
|
|---|
| 2826 | tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
|
|---|
| 2827 |
|
|---|
| 2828 | needed_modules=""
|
|---|
| 2829 | list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
|
|---|
| 2830 |
|
|---|
| 2831 | if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
|
|---|
| 2832 | # For PXE boot
|
|---|
| 2833 | list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
|
|---|
| 2834 | fi
|
|---|
| 2835 | for i in $DENY_MODS; do
|
|---|
| 2836 | LogFile "INFO: Removing $i from the list of modules to load"
|
|---|
| 2837 | list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
|
|---|
| 2838 | done
|
|---|
| 2839 |
|
|---|
| 2840 | if [ "${kernelname}" != "" ]; then
|
|---|
| 2841 | needed_modules_path=lib/modules/${kernelname}
|
|---|
| 2842 | mkgmopt="-k ${kernelname}"
|
|---|
| 2843 | else
|
|---|
| 2844 | needed_modules_path=lib/modules/$KERVERRUN
|
|---|
| 2845 | mkgmopt="-k $KERVERRUN"
|
|---|
| 2846 | fi
|
|---|
| 2847 |
|
|---|
| 2848 | [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
|
|---|
| 2849 | LogAll "INFO: Analyzing kernel modules dependencies..."
|
|---|
| 2850 | needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
|
|---|
| 2851 |
|
|---|
| 2852 | LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
|
|---|
| 2853 | cp --parents -aL $needed_modules $targetdir/ 2> $templog || LogAll "ERROR: Unable to copy modules to $targetdir" $templog
|
|---|
| 2854 |
|
|---|
| 2855 | # Uncompress modules if not using udev and native modprobe
|
|---|
| 2856 | if [ ! -f $targetdir/tmp/USE-UDEV ]; then
|
|---|
| 2857 | for i in $needed_modules; do
|
|---|
| 2858 | if [ "`echo "$i" | grep -E ".gz$"`" ]; then
|
|---|
| 2859 | gunzip -f $targetdir/$i
|
|---|
| 2860 | fi
|
|---|
| 2861 | if [ "`echo "$i" | grep -E ".bz$"`" ]; then
|
|---|
| 2862 | bunzip2 -f $targetdir/$i
|
|---|
| 2863 | fi
|
|---|
| 2864 | if [ "`echo "$i" | grep -E ".xz$"`" ]; then
|
|---|
| 2865 | unxz -f $targetdir/$i
|
|---|
| 2866 | fi
|
|---|
| 2867 | LogFile "INFO: Uncompressing $i"
|
|---|
| 2868 | done
|
|---|
| 2869 | fi
|
|---|
| 2870 |
|
|---|
| 2871 | # Also copy modules.* in case of udev so that normal modprobe works
|
|---|
| 2872 | tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$targetdir" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
|
|---|
| 2873 |
|
|---|
| 2874 | # Copy FW in case some drivers needs it
|
|---|
| 2875 | for d in "/lib" "/usr/lib"; do
|
|---|
| 2876 | if [ -d "$d/firmware" -a ! -h $d ]; then
|
|---|
| 2877 | cp -a "$d/firmware" "$targetdir$d"
|
|---|
| 2878 | fi
|
|---|
| 2879 | done
|
|---|
| 2880 |
|
|---|
| 2881 | # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
|
|---|
| 2882 | for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
|
|---|
| 2883 | if [ -d "$d/multipath" -a ! -h $d ]; then
|
|---|
| 2884 | cp -a "$d/multipath" "$targetdir$d"
|
|---|
| 2885 | fi
|
|---|
| 2886 | done
|
|---|
| 2887 |
|
|---|
| 2888 | # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
|
|---|
| 2889 | (cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
|
|---|
| 2890 |
|
|---|
| 2891 | # Copy an additional ProLiant tool for OBDR support
|
|---|
| 2892 | if [ -f $MINDI_TMP/OBDR ]; then
|
|---|
| 2893 | found=0
|
|---|
| 2894 | if [ -x /usr/bin/hpsa_obdr_mode ]; then
|
|---|
| 2895 | mkdir -p $targetdir/usr/bin
|
|---|
| 2896 | cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
|
|---|
| 2897 | LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
|
|---|
| 2898 | found=1
|
|---|
| 2899 | fi
|
|---|
| 2900 | if [ -x /usr/bin/sg_wr_mode ]; then
|
|---|
| 2901 | mkdir -p $targetdir/usr/bin
|
|---|
| 2902 | lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
|
|---|
| 2903 | LocateDeps $lis > $MINDI_TMP/obdr.lis
|
|---|
| 2904 | tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
|
|---|
| 2905 | LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
|
|---|
| 2906 | found=1
|
|---|
| 2907 | fi
|
|---|
| 2908 | if [ $found -eq 0 ]; then
|
|---|
| 2909 | LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
|
|---|
| 2910 | LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
|
|---|
| 2911 | fi
|
|---|
| 2912 | fi
|
|---|
| 2913 |
|
|---|
| 2914 | if [ ! -e "/sbin/devfsd" ]; then
|
|---|
| 2915 | LogFile "INFO: Deleting devfsd daemon from ramdisk"
|
|---|
| 2916 | [ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
|
|---|
| 2917 | rm -f $targetdir/sbin/devfsd
|
|---|
| 2918 | fi
|
|---|
| 2919 | [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
|
|---|
| 2920 | if [ _"$MONDO_SHARE" != _"" ]; then
|
|---|
| 2921 | MakeMondoConfigFile $targetdir/tmp/$MRCFG
|
|---|
| 2922 | cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
|
|---|
| 2923 | cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
|
|---|
| 2924 | echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
|
|---|
| 2925 | echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
|
|---|
| 2926 | fi
|
|---|
| 2927 |
|
|---|
| 2928 | # Create module list to load at restore time
|
|---|
| 2929 | rm -f $targetdir/tmp/modules
|
|---|
| 2930 | for m in $CDROM_MODS; do
|
|---|
| 2931 | echo $m >> $targetdir/tmp/modules
|
|---|
| 2932 | done
|
|---|
| 2933 |
|
|---|
| 2934 | mkdir -p $targetdir/proc
|
|---|
| 2935 | LogFile "---------------------------"
|
|---|
| 2936 | LogFile "Content of initial targetdir:"
|
|---|
| 2937 | LogFile "---------------------------- "
|
|---|
| 2938 | (cd "$targetdir" ; ls -Rla ) >> $LOGFILE
|
|---|
| 2939 | LogFile "---------------------------"
|
|---|
| 2940 | }
|
|---|
| 2941 |
|
|---|
| 2942 | CleanTargetDir() {
|
|---|
| 2943 | [ "$targetdir" != "/" ] && rm -rf $targetdir
|
|---|
| 2944 | }
|
|---|
| 2945 |
|
|---|
| 2946 | PatchBootFiles() {
|
|---|
| 2947 |
|
|---|
| 2948 | # Patch the real value of RAMDISK_SIZE now we have it
|
|---|
| 2949 | if [ -d "$bigdir/syslinux" ]; then
|
|---|
| 2950 | find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
|
|---|
| 2951 | fi
|
|---|
| 2952 | if [ -d "$bigdir/EFI" ]; then
|
|---|
| 2953 | find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
|
|---|
| 2954 | fi
|
|---|
| 2955 | for i in `cat $MINDI_TMP/bootf.lis`; do
|
|---|
| 2956 | perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
|
|---|
| 2957 | done
|
|---|
| 2958 | rm -f $MINDI_TMP/bootf.lis
|
|---|
| 2959 |
|
|---|
| 2960 | }
|
|---|
| 2961 |
|
|---|
| 2962 | MakeBootInitFile() {
|
|---|
| 2963 |
|
|---|
| 2964 | local mountpoint tempfile res
|
|---|
| 2965 | tempfile=$MINDI_TMP/temp.rd
|
|---|
| 2966 | res=0
|
|---|
| 2967 |
|
|---|
| 2968 | LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
|
|---|
| 2969 | dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
|
|---|
| 2970 |
|
|---|
| 2971 | LogAll "INFO: Creating ext2 filesystem on $tempfile"
|
|---|
| 2972 | mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
|
|---|
| 2973 | res=$(($res+$?))
|
|---|
| 2974 |
|
|---|
| 2975 | mountpoint=$MINDI_TMP/mountpoint.$$
|
|---|
| 2976 | mkdir -p $mountpoint
|
|---|
| 2977 | mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
|
|---|
| 2978 | [ "$targetdir" = "/" ] && echo $targetdir | grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
|
|---|
| 2979 | mv $targetdir/* $targetdir/.??* $mountpoint || Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
|
|---|
| 2980 | res=$(($res+$?))
|
|---|
| 2981 | rmdir $targetdir
|
|---|
| 2982 |
|
|---|
| 2983 | LogFile "INFO: initrd image is $rdz_fname"
|
|---|
| 2984 | # Determine what filesystem to use for initrd image
|
|---|
| 2985 | LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
|
|---|
| 2986 | gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
|
|---|
| 2987 | [ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
|
|---|
| 2988 | if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
|
|---|
| 2989 | # say what will be used
|
|---|
| 2990 | LogFile "INFO: Creating an $gvFileSystem initrd image..."
|
|---|
| 2991 | # unmount loop filesystem and create image file using the standard approach
|
|---|
| 2992 | sync
|
|---|
| 2993 | umount $mountpoint || Die "Cannot unmount $tempfile"
|
|---|
| 2994 | dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
|
|---|
| 2995 | res=$(($res+$?))
|
|---|
| 2996 | if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
|
|---|
| 2997 | bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
|
|---|
| 2998 | else
|
|---|
| 2999 | bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
|
|---|
| 3000 | fi
|
|---|
| 3001 | MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
|
|---|
| 3002 | gzip -c9 ${rdz_fname}.tmp > $rdz_fname
|
|---|
| 3003 | res=$(($res+$?))
|
|---|
| 3004 | rm -f ${rdz_fname}.tmp
|
|---|
| 3005 | elif [ "$gvFileSystem" = "initramfs" ]; then
|
|---|
| 3006 | # say what will be used
|
|---|
| 3007 | LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
|
|---|
| 3008 | # make sure that cpio is there
|
|---|
| 3009 | which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
|
|---|
| 3010 | # create cpio image file and unmount loop filesystem
|
|---|
| 3011 | (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
|
|---|
| 3012 | res=$(($res+$?))
|
|---|
| 3013 | sync
|
|---|
| 3014 | umount $mountpoint || Die "Cannot unmount $tempfile"
|
|---|
| 3015 | else
|
|---|
| 3016 | Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
|
|---|
| 3017 | fi
|
|---|
| 3018 |
|
|---|
| 3019 | # log that we are done
|
|---|
| 3020 | if [ "$res" -eq "0" ] ; then
|
|---|
| 3021 | LogAll "INFO: MakeBootInitFile finished without error."
|
|---|
| 3022 | else
|
|---|
| 3023 | LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
|
|---|
| 3024 | fi
|
|---|
| 3025 |
|
|---|
| 3026 | return 0
|
|---|
| 3027 | }
|
|---|
| 3028 |
|
|---|
| 3029 |
|
|---|
| 3030 | ##############################################################################
|
|---|
| 3031 | #----------------------------------- Main -----------------------------------#
|
|---|
| 3032 | ##############################################################################
|
|---|
| 3033 |
|
|---|
| 3034 | # Now we can create what we need
|
|---|
| 3035 | mkdir -p $MINDI_TMP
|
|---|
| 3036 | export bigdir=$MINDI_TMP/bigdir.$$
|
|---|
| 3037 | export targetdir=$MINDI_TMP/targetdir.$$
|
|---|
| 3038 |
|
|---|
| 3039 | # --nolog needs to be first, and is used in analyze-my-lvm
|
|---|
| 3040 | if [ "$1" = "--nolog" ] ; then
|
|---|
| 3041 | shift
|
|---|
| 3042 | LOGFILE=/dev/stderr
|
|---|
| 3043 | else
|
|---|
| 3044 | > $LOGFILE
|
|---|
| 3045 | fi
|
|---|
| 3046 | if [ "$1" = "--printvar" ] ; then
|
|---|
| 3047 | shift
|
|---|
| 3048 | if [ _"$1" != _"" ] ; then
|
|---|
| 3049 | set | grep -Ew "^$1" | cut -d= -f2
|
|---|
| 3050 | fi
|
|---|
| 3051 | exit 0
|
|---|
| 3052 | fi
|
|---|
| 3053 |
|
|---|
| 3054 | LogFile "mindi v$MINDI_VERSION"
|
|---|
| 3055 | LogFile "-----------------------------"
|
|---|
| 3056 | LogFile "Start date : `date`"
|
|---|
| 3057 | LogFile "-----------------------------"
|
|---|
| 3058 | LogFile "$ARCH architecture detected"
|
|---|
| 3059 | LogFile "mindi called with the following arguments:"
|
|---|
| 3060 | echo "$@">> $LOGFILE
|
|---|
| 3061 | LogFile "-----------------------------"
|
|---|
| 3062 | pbdistrocheck --version | grep Version >> $LOGFILE
|
|---|
| 3063 | LogFile "pbdistrocheck results:"
|
|---|
| 3064 | pbdistrocheck >> $LOGFILE
|
|---|
| 3065 | LogFile "-----------------------------"
|
|---|
| 3066 | LogFile "MondoRescue perl module:"
|
|---|
| 3067 | mr-getparam --version | grep Version >> $LOGFILE
|
|---|
| 3068 | LogFile "-----------------------------"
|
|---|
| 3069 |
|
|---|
| 3070 | # Log some capital variables
|
|---|
| 3071 | [ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
|
|---|
| 3072 | [ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
|
|---|
| 3073 | LogFile "MONDO_SHARE = $MONDO_SHARE"
|
|---|
| 3074 | LogFile "MINDI_LIB = $MINDI_LIB"
|
|---|
| 3075 | LogFile "MINDI_SBIN = $MINDI_SBIN"
|
|---|
| 3076 | LogFile "MINDI_CONF = $MINDI_CONF"
|
|---|
| 3077 | # Purge from potential old run
|
|---|
| 3078 | if [ _"$MINDI_CACHE" = _"" ]; then
|
|---|
| 3079 | Die "MINDI_CACHE undefined"
|
|---|
| 3080 | else
|
|---|
| 3081 | LogFile "MINDI_CACHE = $MINDI_CACHE"
|
|---|
| 3082 | fi
|
|---|
| 3083 |
|
|---|
| 3084 | if [ -f $MINDI_CONFIG ]; then
|
|---|
| 3085 | LogFile "-----------------------------"
|
|---|
| 3086 | LogFile " Mindi configuration file "
|
|---|
| 3087 | LogFile "-----------------------------"
|
|---|
| 3088 | grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
|
|---|
| 3089 | LogFile "-----------------------------"
|
|---|
| 3090 | fi
|
|---|
| 3091 | LogFile "In Mindi"
|
|---|
| 3092 | LogFile "--------"
|
|---|
| 3093 | LogFile "EXTRA_SPACE = $EXTRA_SPACE"
|
|---|
| 3094 | LogFile "--------"
|
|---|
| 3095 |
|
|---|
| 3096 | trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
|
|---|
| 3097 |
|
|---|
| 3098 | # Sanity checks
|
|---|
| 3099 | which which > /dev/null 2> /dev/null || Die "Please install 'which'."
|
|---|
| 3100 | which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
|
|---|
| 3101 | which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
|
|---|
| 3102 | which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
|
|---|
| 3103 | if which awk &> /dev/null ; then
|
|---|
| 3104 | if ! which gawk &> /dev/null ; then
|
|---|
| 3105 | LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
|
|---|
| 3106 | fi
|
|---|
| 3107 | fi
|
|---|
| 3108 | which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
|
|---|
| 3109 | [ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
|
|---|
| 3110 |
|
|---|
| 3111 | [ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
|
|---|
| 3112 |
|
|---|
| 3113 | # Update the PATH variable if incomplete
|
|---|
| 3114 | if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
|
|---|
| 3115 | PATH=$PATH:/sbin:/usr/sbin
|
|---|
| 3116 | export PATH
|
|---|
| 3117 | LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
|
|---|
| 3118 | LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
|
|---|
| 3119 | LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
|
|---|
| 3120 | fi
|
|---|
| 3121 |
|
|---|
| 3122 | if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
|
|---|
| 3123 | Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
|
|---|
| 3124 | fi
|
|---|
| 3125 |
|
|---|
| 3126 | ### TODO
|
|---|
| 3127 | ### Fix as it's not mandatory on ia64
|
|---|
| 3128 | if [ "$ARCH" = "ia64" ] ; then
|
|---|
| 3129 | if which elilo &> /dev/null ; then
|
|---|
| 3130 | LILO_EXE=elilo
|
|---|
| 3131 | else
|
|---|
| 3132 | LILO_EXE=`which false 2> /dev/null`
|
|---|
| 3133 | fi
|
|---|
| 3134 | else
|
|---|
| 3135 | FindIsolinuxBinary
|
|---|
| 3136 | fi
|
|---|
| 3137 | trap "Aborted" SIGTERM
|
|---|
| 3138 | DONE="\r\t\t\t\t\t\t\t\tDone. "
|
|---|
| 3139 | kernelpath=""
|
|---|
| 3140 | MONDO_ROOT=/var/cache/mondo
|
|---|
| 3141 | mkdir -p $MONDO_ROOT
|
|---|
| 3142 |
|
|---|
| 3143 | if [ -d "/proc/lvm" ]; then
|
|---|
| 3144 | # LVM v1
|
|---|
| 3145 | LVMCMD=""
|
|---|
| 3146 | LVM="v1"
|
|---|
| 3147 | elif [ -d "/dev/mapper" ]; then
|
|---|
| 3148 | # LVM v2
|
|---|
| 3149 | LVMCMD="lvm"
|
|---|
| 3150 | LVM="v2"
|
|---|
| 3151 | else
|
|---|
| 3152 | LVM="false"
|
|---|
| 3153 | fi
|
|---|
| 3154 |
|
|---|
| 3155 | if [ -e "/proc/cmdline" ]; then
|
|---|
| 3156 | CMDLINE="/proc/cmdline"
|
|---|
| 3157 | elif [ -e "/tmp/cmdline" ]; then
|
|---|
| 3158 | CMDLINE="/tmp/cmdline"
|
|---|
| 3159 | else
|
|---|
| 3160 | CMDLINE="/dev/null"
|
|---|
| 3161 | fi
|
|---|
| 3162 |
|
|---|
| 3163 | LogFile "INFO: LVM set to $LVM"
|
|---|
| 3164 | LogFile "----------"
|
|---|
| 3165 | LogFile "mount result:"
|
|---|
| 3166 | LogFile "-------------"
|
|---|
| 3167 | mount >> $LOGFILE
|
|---|
| 3168 | if [ -e "/etc/raidtab" ]; then
|
|---|
| 3169 | LogFile "-------------"
|
|---|
| 3170 | LogFile "/etc/raidtab content:"
|
|---|
| 3171 | LogFile "-------------"
|
|---|
| 3172 | cat /etc/raidtab >> $LOGFILE
|
|---|
| 3173 | else
|
|---|
| 3174 | LogFile "No file /etc/raidtab"
|
|---|
| 3175 | fi
|
|---|
| 3176 | if [ -e "/etc/mdadm.conf" ]; then
|
|---|
| 3177 | LogFile "-------------"
|
|---|
| 3178 | LogFile "/etc/mdadm.conf content:"
|
|---|
| 3179 | LogFile "-------------"
|
|---|
| 3180 | cat /etc/mdadm.conf >> $LOGFILE
|
|---|
| 3181 | else
|
|---|
| 3182 | LogFile "-------------"
|
|---|
| 3183 | LogFile "No file /etc/mdadm.conf"
|
|---|
| 3184 | fi
|
|---|
| 3185 | LogFile "-------------"
|
|---|
| 3186 | LogFile "cat $CMDLINE"
|
|---|
| 3187 | LogFile "-------------"
|
|---|
| 3188 | cat $CMDLINE >> $LOGFILE
|
|---|
| 3189 | LogFile "-------------"
|
|---|
| 3190 | LogFile "cat /proc/swaps:"
|
|---|
| 3191 | LogFile "-------------"
|
|---|
| 3192 | cat /proc/swaps >> $LOGFILE
|
|---|
| 3193 | LogFile "-------------"
|
|---|
| 3194 | if [ -e "/proc/mdstat" ]; then
|
|---|
| 3195 | LogFile "cat /proc/mdstat:"
|
|---|
| 3196 | LogFile "-------------"
|
|---|
| 3197 | cat /proc/mdstat >> $LOGFILE
|
|---|
| 3198 | else
|
|---|
| 3199 | LogFile "No pseudo file /proc/mdstat"
|
|---|
| 3200 | fi
|
|---|
| 3201 | LogFile "-------------"
|
|---|
| 3202 | LogFile "cat /proc/partitions:"
|
|---|
| 3203 | LogFile "-------------"
|
|---|
| 3204 | cat /proc/partitions >> $LOGFILE
|
|---|
| 3205 | LogFile "-------------"
|
|---|
| 3206 | LogFile "cat /proc/filesystems:"
|
|---|
| 3207 | LogFile "-------------"
|
|---|
| 3208 | cat /proc/filesystems >> $LOGFILE
|
|---|
| 3209 | LogFile "-------------"
|
|---|
| 3210 | LogFile "lsmod result:"
|
|---|
| 3211 | LogFile "-------------"
|
|---|
| 3212 | lsmod >> $LOGFILE
|
|---|
| 3213 | MODULES="`cat /proc/modules | $AWK '{print $1}'`"
|
|---|
| 3214 | if [ -x /usr/sbin/esxcfg-module ]; then
|
|---|
| 3215 | LogFile "-------------"
|
|---|
| 3216 | LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
|
|---|
| 3217 | LogFile "-------------"
|
|---|
| 3218 | LogFile "VMWare modules"
|
|---|
| 3219 | LogFile "-------------"
|
|---|
| 3220 | /usr/sbin/esxcfg-module -l >> $LOGFILE
|
|---|
| 3221 | MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
|
|---|
| 3222 | fi
|
|---|
| 3223 | LogFile "-------------"
|
|---|
| 3224 | LogFile "FORCE_MODS:"
|
|---|
| 3225 | LogFile "-------------"
|
|---|
| 3226 | LogFile "$FORCE_MODS"
|
|---|
| 3227 | LogFile "-------------"
|
|---|
| 3228 | LogFile "DENY_MODS:"
|
|---|
| 3229 | LogFile "-------------"
|
|---|
| 3230 | LogFile "$DENY_MODS"
|
|---|
| 3231 | LogFile "-------------"
|
|---|
| 3232 | LogFile "df result:"
|
|---|
| 3233 | LogFile "----------"
|
|---|
| 3234 | df -aT >> $LOGFILE
|
|---|
| 3235 | LogFile "-------------"
|
|---|
| 3236 | LogFile "df -i result:"
|
|---|
| 3237 | LogFile "----------"
|
|---|
| 3238 | df -i >> $LOGFILE
|
|---|
| 3239 | LogFile "-------------"
|
|---|
| 3240 | if [ -r /boot/grub/menu.lst ]; then
|
|---|
| 3241 | LogFile "-------------"
|
|---|
| 3242 | LogFile "INFO: /boot/grub/menu.lst content"
|
|---|
| 3243 | LogFile "-------------"
|
|---|
| 3244 | cat /boot/grub/menu.lst >> $LOGFILE
|
|---|
| 3245 | LogFile "-------------"
|
|---|
| 3246 | fi
|
|---|
| 3247 | if [ -r /boot/grub/grub.conf ]; then
|
|---|
| 3248 | LogFile "-------------"
|
|---|
| 3249 | LogFile "INFO: /boot/grub/grub.conf content"
|
|---|
| 3250 | LogFile "-------------"
|
|---|
| 3251 | cat /boot/grub/grub.conf >> $LOGFILE
|
|---|
| 3252 | LogFile "-------------"
|
|---|
| 3253 | fi
|
|---|
| 3254 | if [ -r /boot/grub/grub.cfg ]; then
|
|---|
| 3255 | LogFile "-------------"
|
|---|
| 3256 | LogFile "INFO: /boot/grub/grub.cfg content"
|
|---|
| 3257 | LogFile "-------------"
|
|---|
| 3258 | cat /boot/grub/grub.cfg >> $LOGFILE
|
|---|
| 3259 | LogFile "-------------"
|
|---|
| 3260 | fi
|
|---|
| 3261 | if [ -r /boot/grub/device.map ]; then
|
|---|
| 3262 | LogFile "-------------"
|
|---|
| 3263 | LogFile "INFO: /boot/grub/device.map content"
|
|---|
| 3264 | LogFile "-------------"
|
|---|
| 3265 | cat /boot/grub/device.map >> $LOGFILE
|
|---|
| 3266 | LogFile "-------------"
|
|---|
| 3267 | fi
|
|---|
| 3268 | if [ -r /boot/grub2/device.map ]; then
|
|---|
| 3269 | LogFile "-------------"
|
|---|
| 3270 | LogFile "INFO: /boot/grub2/device.map content"
|
|---|
| 3271 | LogFile "-------------"
|
|---|
| 3272 | cat /boot/grub2/device.map >> $LOGFILE
|
|---|
| 3273 | LogFile "-------------"
|
|---|
| 3274 | fi
|
|---|
| 3275 | if [ -r /etc/lilo.conf ]; then
|
|---|
| 3276 | LogFile "-------------"
|
|---|
| 3277 | LogFile "INFO: /etc/lilo.conf content"
|
|---|
| 3278 | LogFile "-------------"
|
|---|
| 3279 | cat /etc/lilo.conf >> $LOGFILE
|
|---|
| 3280 | fi
|
|---|
| 3281 | if [ -d /boot/efi ]; then
|
|---|
| 3282 | gcf=`find /boot/efi -name 'grub.c*'`
|
|---|
| 3283 | if [ _"$gcf" = _"" ]; then
|
|---|
| 3284 | LogFile "Found a /boot/efi directory without a grub config file in it"
|
|---|
| 3285 | else
|
|---|
| 3286 | LogFile "-------------"
|
|---|
| 3287 | LogFile "INFO: $gcf content"
|
|---|
| 3288 | LogFile "-------------"
|
|---|
| 3289 | cat $gcf >> $LOGFILE
|
|---|
| 3290 | LogFile "-------------"
|
|---|
| 3291 | fi
|
|---|
| 3292 | fi
|
|---|
| 3293 |
|
|---|
| 3294 | LogFile "Full fdisk info"
|
|---|
| 3295 | LogFile "---------------"
|
|---|
| 3296 | $FDISK -l >> $LOGFILE
|
|---|
| 3297 | LogFile "----------------"
|
|---|
| 3298 |
|
|---|
| 3299 | # Compute libata version
|
|---|
| 3300 | laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/ *//g' 2> /dev/null`
|
|---|
| 3301 | # If libata v2 is used then remove ide-generic as it will perturbate boot
|
|---|
| 3302 | if [ "`echo $MODULES | grep libata`" ]; then
|
|---|
| 3303 | if [ "$laver" = "2" ]; then
|
|---|
| 3304 | DENY_MODS="$DENY_MODS ide-generic"
|
|---|
| 3305 | LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
|
|---|
| 3306 | LogFile "-------------"
|
|---|
| 3307 | fi
|
|---|
| 3308 | fi
|
|---|
| 3309 |
|
|---|
| 3310 | # Check for McAfee which disturbs the access to some files (tgz in articular)
|
|---|
| 3311 | if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
|
|---|
| 3312 | LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
|
|---|
| 3313 | LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
|
|---|
| 3314 | LogFile "WARNING: You have two options:"
|
|---|
| 3315 | LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
|
|---|
| 3316 | LogFile "WARNING: - Disable the scanner during the backup"
|
|---|
| 3317 | fi
|
|---|
| 3318 |
|
|---|
| 3319 | #
|
|---|
| 3320 | # If we have a USB device we need to store info
|
|---|
| 3321 | # and remove it from the parameters line
|
|---|
| 3322 | #
|
|---|
| 3323 | if [ "$#" -ne "0" ] ; then
|
|---|
| 3324 | if [ "$1" = "--usb" ] ; then
|
|---|
| 3325 | shift
|
|---|
| 3326 | USBDEVICE=$1
|
|---|
| 3327 | if [ _"$USBDEVICE" = _"" ]; then
|
|---|
| 3328 | Die "No USB device specified"
|
|---|
| 3329 | fi
|
|---|
| 3330 | shift
|
|---|
| 3331 | fi
|
|---|
| 3332 | fi
|
|---|
| 3333 |
|
|---|
| 3334 | if [ "$#" -ne "0" ] ; then
|
|---|
| 3335 | if [ "$1" = "--findkernel" ] ; then
|
|---|
| 3336 | resk=`TryToFindKernelPath`
|
|---|
| 3337 | # Avoids logfile content for mondo
|
|---|
| 3338 | export MONDO_SHARE=""
|
|---|
| 3339 | if [ "$resk" = "" ] ; then
|
|---|
| 3340 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
|---|
| 3341 | echo "$xenkernelpath"
|
|---|
| 3342 | LogFile "INFO: xenkernelpath = $xenkernelpath"
|
|---|
| 3343 | MindiExit 0
|
|---|
| 3344 | else
|
|---|
| 3345 | MindiExit -1
|
|---|
| 3346 | fi
|
|---|
| 3347 | else
|
|---|
| 3348 | echo "$resk"
|
|---|
| 3349 | LogFile "INFO: kernelpath = $resk"
|
|---|
| 3350 | MindiExit 0
|
|---|
| 3351 | fi
|
|---|
| 3352 | elif [ "$1" = "--locatedeps" ] ; then
|
|---|
| 3353 | [ ! "$2" ] && Die "Please specify the binary to look at"
|
|---|
| 3354 | LocateDeps $*
|
|---|
| 3355 | # Avoids logfile content for mondo
|
|---|
| 3356 | export MONDO_SHARE=""
|
|---|
| 3357 | MindiExit $?
|
|---|
| 3358 | elif [ "$1" = "--readalllink" ] ; then
|
|---|
| 3359 | [ ! "$2" ] && Die "Please specify the binary to look at"
|
|---|
| 3360 | # Avoids logfile content for mondo
|
|---|
| 3361 | export MONDO_SHARE=""
|
|---|
| 3362 | mr-read-all-link $2
|
|---|
| 3363 | MindiExit $?
|
|---|
| 3364 | elif [ "$1" = "--makebcf" ] ; then
|
|---|
| 3365 | [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
|
|---|
| 3366 | MakeBootConfFile $2
|
|---|
| 3367 | MindiExit 0
|
|---|
| 3368 | elif [ "$1" = "--makemessage" ] ; then
|
|---|
| 3369 | MakeMessageFile | cut -c1-80
|
|---|
| 3370 | MindiExit 0
|
|---|
| 3371 | elif [ "$1" = "--makemountlist" ] ; then
|
|---|
| 3372 | [ ! "$2" ] && Die "Please specify the output file"
|
|---|
| 3373 | MakeMountlist $2
|
|---|
| 3374 | CheckMountlist $2
|
|---|
| 3375 | # Avoids logfile content for mondo
|
|---|
| 3376 | export MONDO_SHARE=""
|
|---|
| 3377 | MindiExit $?
|
|---|
| 3378 | elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
|
|---|
| 3379 | echo "Mindi v$MINDI_VERSION"
|
|---|
| 3380 | # Avoids logfile content for mondo
|
|---|
| 3381 | export MONDO_SHARE=""
|
|---|
| 3382 | MindiExit 0
|
|---|
| 3383 | elif [ "$1" = "--ironic" ] ; then
|
|---|
| 3384 | [ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
|
|---|
| 3385 | [ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
|
|---|
| 3386 | [ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
|
|---|
| 3387 | #TODO: See how we can influence the boot loader
|
|---|
| 3388 | [ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
|
|---|
| 3389 | if [ "$5" ]; then
|
|---|
| 3390 | boottype=$5
|
|---|
| 3391 | fi
|
|---|
| 3392 | [ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
|
|---|
| 3393 | if [ "$6" ]; then
|
|---|
| 3394 | bootbin=$6
|
|---|
| 3395 | fi
|
|---|
| 3396 | kernelpath=$2
|
|---|
| 3397 | BOOT_TYPE=$4
|
|---|
| 3398 | # Ironic requires some specific boot parameters
|
|---|
| 3399 | MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
|
|---|
| 3400 | MINDI_BOOT_TIMEOUT=10
|
|---|
| 3401 | EXTRA_SPACE=1500000
|
|---|
| 3402 | # Get the local improvements to the configuration
|
|---|
| 3403 | if [ -f $MINDI_CONFIG ]; then
|
|---|
| 3404 | . $MINDI_CONFIG
|
|---|
| 3405 | fi
|
|---|
| 3406 | PrepareBootDir
|
|---|
| 3407 | PrepareBigDirTar
|
|---|
| 3408 | CleanBigDir
|
|---|
| 3409 | cp $3 $MINDI_TMP/initrd.img
|
|---|
| 3410 | MakeBootableDevice ISO
|
|---|
| 3411 | MindiExit 0
|
|---|
| 3412 | elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
|
|---|
| 3413 | MONDO_TMP=$2
|
|---|
| 3414 | # Change MINDI_TMP for the one provided by mondo
|
|---|
| 3415 | # So that it can get back the built files
|
|---|
| 3416 | if [ _"$MONDO_TMP" = _"" ]; then
|
|---|
| 3417 | Die "MONDO_TMP is empty, aborting"
|
|---|
| 3418 | fi
|
|---|
| 3419 | if [ _"$MONDO_TMP" = _"/" ]; then
|
|---|
| 3420 | Die "MONDO_TMP is /, aborting"
|
|---|
| 3421 | fi
|
|---|
| 3422 | mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
|
|---|
| 3423 | rmdir $MINDI_TMP
|
|---|
| 3424 | export MINDI_TMP=$MONDO_TMP
|
|---|
| 3425 | mkdir -p $MINDI_TMP
|
|---|
| 3426 |
|
|---|
| 3427 | # This is the scratch dir in mondo - subdir images
|
|---|
| 3428 | MINDI_CACHE=$3
|
|---|
| 3429 | LogFile "MINDI_CACHE = $MINDI_CACHE"
|
|---|
| 3430 |
|
|---|
| 3431 | kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
|
|---|
| 3432 | [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
|
|---|
| 3433 |
|
|---|
| 3434 | ###
|
|---|
| 3435 | ### Sq-Modification...
|
|---|
| 3436 | ### Attempt to locate kernel specific module path
|
|---|
| 3437 | ### if module path is found then use it other wise use uname -r to set it...
|
|---|
| 3438 | ###
|
|---|
| 3439 | if [ $KERNEL_IS_XEN = "yes" ]; then
|
|---|
| 3440 | LogAll "INFO: xenkernelpath = $xenkernelpath"
|
|---|
| 3441 | fi
|
|---|
| 3442 | kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
|
|---|
| 3443 | if [ ! -d "/lib/modules/$kernelname" ]; then
|
|---|
| 3444 | LogAll "WARNING: Module path for ${kernelpath} not found..."
|
|---|
| 3445 | LogAll " using running kernel\'s modules."
|
|---|
| 3446 | kernelname=$KERVERRUN
|
|---|
| 3447 | else
|
|---|
| 3448 | LogAll "INFO: Using modules for kernel: ${kernelname}"
|
|---|
| 3449 | fi
|
|---|
| 3450 | LogAll "INFO: kernelname = $kernelname"
|
|---|
| 3451 | LogAll "INFO: kernelpath = $kernelpath"
|
|---|
| 3452 | ###
|
|---|
| 3453 | ### end of Sq-Modification
|
|---|
| 3454 | ###
|
|---|
| 3455 | TAPEDEV=$5
|
|---|
| 3456 | TAPESIZE=$6
|
|---|
| 3457 | FILES_IN_FILELIST=$7
|
|---|
| 3458 | USE_LZO=$8
|
|---|
| 3459 | CDRECOVERY=$9
|
|---|
| 3460 | if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
|
|---|
| 3461 | IMAGE_DEVS=""
|
|---|
| 3462 | else
|
|---|
| 3463 | IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
|
|---|
| 3464 | fi
|
|---|
| 3465 | if [ "${11}" ] ; then
|
|---|
| 3466 | LILO_OPTIONS=""
|
|---|
| 3467 | # LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
|
|---|
| 3468 | fi
|
|---|
| 3469 | LAST_FILELIST_NUMBER=${12}
|
|---|
| 3470 | ESTIMATED_TOTAL_NOOF_SLICES=${13}
|
|---|
| 3471 | export MINDI_EXCLUDE_DEVS="${14}"
|
|---|
| 3472 | USE_COMP="${15}"
|
|---|
| 3473 | USE_LILO="${16}"
|
|---|
| 3474 | USE_STAR="${17}"
|
|---|
| 3475 | INTERNAL_TAPE_BLOCK_SIZE="${18}"
|
|---|
| 3476 | DIFFERENTIAL="${19}"
|
|---|
| 3477 | USE_GZIP="${20}"
|
|---|
| 3478 | USE_LZMA="${21}"
|
|---|
| 3479 | NOT_BOOT="${22}"
|
|---|
| 3480 | BOOT_TYPE="${23}"
|
|---|
| 3481 | [ "$USE_COMP" = "" ] && USE_COMP=yes
|
|---|
| 3482 | [ "$USE_GZIP" = "" ] && USE_GZIP=no
|
|---|
| 3483 | [ "$USE_LZMA" = "" ] && USE_LZMA=no
|
|---|
| 3484 | [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
|
|---|
| 3485 | [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
|
|---|
| 3486 | # MONDO_ROOT is the real scratchdir
|
|---|
| 3487 | MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
|
|---|
| 3488 | if [ _"$MONDO_ROOT" != _"" ]; then
|
|---|
| 3489 | mkdir -p $MONDO_ROOT
|
|---|
| 3490 | else
|
|---|
| 3491 | Die "MONDO_ROOT is undefined"
|
|---|
| 3492 | fi
|
|---|
| 3493 | else
|
|---|
| 3494 | LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
|
|---|
| 3495 | LogScreen " mindi --ironic kernel initrd [BIOS|UEFI] [syslinux|grub|grub2] [/path/to/bootloader]"
|
|---|
| 3496 | LogScreen " mindi --locatedeps file"
|
|---|
| 3497 | LogScreen " mindi --makemessage"
|
|---|
| 3498 | LogScreen " mindi --findkernel"
|
|---|
| 3499 | LogScreen " mindi --makemountlist file"
|
|---|
| 3500 | LogScreen " mindi --makebcf bootloader"
|
|---|
| 3501 | LogScreen " mindi -V"
|
|---|
| 3502 | MindiExit -1
|
|---|
| 3503 | fi
|
|---|
| 3504 | fi
|
|---|
| 3505 |
|
|---|
| 3506 | if [ _"$MINDI_CACHE" != _"" ]; then
|
|---|
| 3507 | rm -rf $MINDI_CACHE/* 2> /dev/null
|
|---|
| 3508 | mkdir -p $MINDI_CACHE
|
|---|
| 3509 | fi
|
|---|
| 3510 |
|
|---|
| 3511 | [ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
|
|---|
| 3512 |
|
|---|
| 3513 | if [ _"$MONDO_SHARE" = _"" ]; then
|
|---|
| 3514 | LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
|
|---|
| 3515 | LogAll "Latest Mindi is available from http://www.mondorescue.org"
|
|---|
| 3516 | LogAll "BusyBox sources are available from http://www.busybox.net"
|
|---|
| 3517 | LogAll "------------------------------------------------------------------------------"
|
|---|
| 3518 | else
|
|---|
| 3519 | LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
|
|---|
| 3520 | fi
|
|---|
| 3521 | if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
|
|---|
| 3522 | LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
|
|---|
| 3523 | else
|
|---|
| 3524 | LogAll "ERROR: Unable to find mindi-busybox, please install it"
|
|---|
| 3525 | MindiExit -1
|
|---|
| 3526 | fi
|
|---|
| 3527 |
|
|---|
| 3528 | for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
|
|---|
| 3529 | modinfo $i 2> /dev/null 1> /dev/null
|
|---|
| 3530 | if [ $? -eq 0 ]; then
|
|---|
| 3531 | modprobe $i 2>&1 > /dev/null
|
|---|
| 3532 | fi
|
|---|
| 3533 | done
|
|---|
| 3534 |
|
|---|
| 3535 | LogFile "DIFFERENTIAL = $DIFFERENTIAL"
|
|---|
| 3536 | LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
|
|---|
| 3537 | LogFile "NOT_BOOT = '$NOT_BOOT'"
|
|---|
| 3538 | if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
|
|---|
| 3539 | LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
|
|---|
| 3540 | MakeMondoConfigFile $MINDI_TMP/$MRCFG
|
|---|
| 3541 | MakeMountlist $MINDI_TMP/mountlist.txt
|
|---|
| 3542 | CheckMountlist $MINDI_TMP/mountlist.txt
|
|---|
| 3543 | mkdir -p $MINDI_TMP/small-all/tmp
|
|---|
| 3544 | cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
|
|---|
| 3545 | (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
|
|---|
| 3546 | sleep 2
|
|---|
| 3547 | LogAll "Done. Exiting."
|
|---|
| 3548 | MindiExit 0
|
|---|
| 3549 | fi
|
|---|
| 3550 |
|
|---|
| 3551 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
|
|---|
| 3552 | LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
|
|---|
| 3553 | fi
|
|---|
| 3554 |
|
|---|
| 3555 | if [ "$kernelpath" = "" ] ; then
|
|---|
| 3556 | [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
|
|---|
| 3557 | echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
|
|---|
| 3558 | read ch
|
|---|
| 3559 | if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
|
|---|
| 3560 | USE_OWN_KERNEL="yes"
|
|---|
| 3561 | else
|
|---|
| 3562 | USE_OWN_KERNEL="no"
|
|---|
| 3563 | fi
|
|---|
| 3564 | if [ "$USE_OWN_KERNEL" = "yes" ]; then
|
|---|
| 3565 | kernelpath=`TryToFindKernelPath`
|
|---|
| 3566 | if [ "$kernelpath" = "" ] ; then
|
|---|
| 3567 | echo -n "Please enter kernel path : "
|
|---|
| 3568 | read kernelpath
|
|---|
| 3569 | fi
|
|---|
| 3570 | fi
|
|---|
| 3571 | fi
|
|---|
| 3572 |
|
|---|
| 3573 | echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
|
|---|
| 3574 | [ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
|
|---|
| 3575 |
|
|---|
| 3576 | PrepareBigDir
|
|---|
| 3577 | bigdir_size=`du -sk $bigdir | cut -f1`
|
|---|
| 3578 | LogFile "---------------------------"
|
|---|
| 3579 | LogFile "INFO: bigdir size is $bigdir_size KB"
|
|---|
| 3580 |
|
|---|
| 3581 | PrepareTargetDir || Die "Could not create initrd.img in target dir"
|
|---|
| 3582 | targetdir_size=`du -sk $targetdir | cut -f1`
|
|---|
| 3583 | LogFile "---------------------------"
|
|---|
| 3584 | LogFile "INFO: targetdir size is $targetdir_size KB"
|
|---|
| 3585 | LogFile "---------------------------- "
|
|---|
| 3586 |
|
|---|
| 3587 | # Now we can compute it correctly with some extra in case of...
|
|---|
| 3588 | export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
|
|---|
| 3589 | # And now we can patch the value in conf files
|
|---|
| 3590 | PatchBootFiles
|
|---|
| 3591 | # And tar them
|
|---|
| 3592 | PrepareBigDirTar
|
|---|
| 3593 | # And prepare boot setup
|
|---|
| 3594 | MakeBootInitFile
|
|---|
| 3595 | # Now cleans up stuff
|
|---|
| 3596 | CleanBigDir
|
|---|
| 3597 | CleanTargetDir
|
|---|
| 3598 |
|
|---|
| 3599 | [ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
|
|---|
| 3600 | ...Or type 'memtest' to test your machine's RAM thoroughly.\n"
|
|---|
| 3601 |
|
|---|
| 3602 | if [ _"$MONDO_SHARE" = _"" ]; then
|
|---|
| 3603 | OfferToMakeBootableISO
|
|---|
| 3604 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
|
|---|
| 3605 | OfferToMakeBootableUSB
|
|---|
| 3606 | fi
|
|---|
| 3607 | LogAll "INFO: Mindi Finished"
|
|---|
| 3608 | elif [ "$TAPEDEV" ] ; then
|
|---|
| 3609 | if [ "$ARCH" != "ia64" ] ; then
|
|---|
| 3610 | # We need to keep the img file as boot file for ia64 platform
|
|---|
| 3611 | rm -f $MINDI_CACHE/{*img,*iso}
|
|---|
| 3612 | else
|
|---|
| 3613 | rm -f $MINDI_CACHE/*iso
|
|---|
| 3614 | fi
|
|---|
| 3615 | if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
|
|---|
| 3616 | OfferToMakeBootableUSB
|
|---|
| 3617 | fi
|
|---|
| 3618 | OfferToMakeBootableISO
|
|---|
| 3619 | if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
|
|---|
| 3620 | cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
|
|---|
| 3621 | else
|
|---|
| 3622 | Die "Cannot find all.tar.gz, to be written to tape"
|
|---|
| 3623 | fi
|
|---|
| 3624 | elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
|
|---|
| 3625 | OfferToMakeBootableUSB
|
|---|
| 3626 | else
|
|---|
| 3627 | OfferToMakeBootableISO
|
|---|
| 3628 | fi
|
|---|
| 3629 |
|
|---|
| 3630 | if [ -f $MINDI_TMP/$MRCFG ]; then
|
|---|
| 3631 | LogFile "INFO: Your $MRCFG file is:"
|
|---|
| 3632 | LogFile "--------------------------"
|
|---|
| 3633 | cat $MINDI_TMP/$MRCFG >> $LOGFILE
|
|---|
| 3634 | LogFile "--------------------------"
|
|---|
| 3635 | else
|
|---|
| 3636 | if [ _"$MONDO_SHARE" != _"" ] ; then
|
|---|
| 3637 | LogAll "ERROR: You don't have a $MRCFG file !"
|
|---|
| 3638 | fi
|
|---|
| 3639 | fi
|
|---|
| 3640 | # cleanup
|
|---|
| 3641 | MindiExit 0
|
|---|
