Context Navigation

source: MondoRescue/branches/3.3/mindi/mindi@ 3693

Visit:

Last change on this file since 3693 was 3693, checked in by Bruno Cornec, 7 years ago
Adds support for HPE ProLiant Gen10 smartpqi driver
Property svn:executable set to ``* Property svn:keywords set to `Rev Id`
File size: 127.8 KB

Rev	Line
[747]	1	#!/bin/bash
	2
	3	# $Id: mindi 3693 2017-10-11 22:57:22Z bruno $
	4	#
	5	#-----------------------------------------------------------------------------
	6	# mindi - mini-Linux distro based on the user's filesystem & distribution
	7	#
[1880]	8	# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]	9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
	10	# the third disk is data disk #2; and so it goes.
	11	#
	12	# See http://www.mondorescue.org for details.
	13	#-----------------------------------------------------------------------------
	14
	15	### Which arch are we on (useful for ia64 port)
[1565]	16	ARCH=`/bin/uname -m`
[2292]	17	KERVERRUN=`/bin/uname -r`
	18	# By default we use the running kernel as a reference
	19	KERVER=$KERVERRUN
[747]	20
[2442]	21	# In case of problem with udev you can try to add udevdebug
[2564]	22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]	23	MINDI_DEFAULT_BOOT_OPTION="interactive"
	24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
	25	# So this parameter only applies to non CD recovery.
	26	MINDI_BOOT_TIMEOUT="300"
[747]	27
[1691]	28	MINDI_REV=PBREV
	29	MINDI_VER=PBVER
[747]	30
	31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
	32	MINDI_PREFIX=XXX
	33	MINDI_CONF=YYY
	34	MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]	35	MINDI_LIB=LLL
[3149]	36	MINDI_CACHE=/var/cache/mindi
[747]	37
[3278]	38	MRCFG=mondorestore.cfg
	39
[925]	40	# Temporary directory for mindi
[3499]	41	TMPDIR=${TMPDIR:=/tmp}
	42	if [ ! -d $TMPDIR ]; then
	43	mkdir -p $TMPDIR
	44	fi
[925]	45
[3692]	46	EXTRA_SPACE=20000 # increase if you run out of ramdisk space - Default 20 MB
[747]	47
	48	PROMPT_MAKE_CD_IMAGE="yes"
	49	# Ask if you want to make a CD Image to be written?
[3522]	50	# if this is set to 'no' in the conf file, then the image will be created automatically
[747]	51
[1684]	52	PROMPT_MAKE_USB_IMAGE="yes"
	53	# Ask if you want to make a USB Image to be written?
[3522]	54	# if this is set to 'no' in the conf file, then the image will be created automatically
[1684]	55
[966]	56	USE_OWN_KERNEL="yes"
[747]	57	# If set to "no", you will be prompted for whether or not
	58	# you want to use your own kernel, or the supplied default.
	59	# If "yes" mindi will automatically use your own kernel.
[925]	60
[2629]	61	KERNEL_IS_XEN="no"
	62	# If set to "no", the kernel is not a Xen kernel
	63	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]	64	xenkernelpath=""
[2629]	65
[747]	66	MY_FSTAB=/etc/fstab
	67	TAPE_MODS="ht st osst ide-tape ide_tape"
[3693]	68	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]	69
	70	# ide-probe-mod
[3661]	71	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
[747]	72	PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3605]	73	USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3446]	74	NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3607]	75	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
[1230]	76	# Replace with that line for HP OCMP e.g.
[2073]	77	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]	78	DENY_MODS="kqemu vxfen"
[1399]	79	# Force some modules to be included
[1354]	80	FORCE_MODS=""
[925]	81
[747]	82	LOGFILE=/var/log/mindi.log
	83	BOOT_MEDIA_MESSAGE="\
[3173]	84	To format and restore all files automatically, type '0enuke07' <enter>.\n\
	85	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
	86	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
	87	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
	88	\n\
	89	You may add one or more parameters as well as per the function keys below\n\
	90	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
	91	\n\
	92	If restoring from a local external disk or USB key, do not connect it \n\
	93	until the boot-up has finished.\n\
	94	\n\
	95	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
[747]	96	"
[3377]	97	FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]	98
[925]	99	# Using a config file allow to overwrite some values
	100	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
	101	if [ -f $MINDI_CONFIG ]; then
	102	. $MINDI_CONFIG
	103	fi
[1885]	104	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]	105	DEPLIST_DIR="$MINDI_CONF/deplist.d"
	106
[3502]	107	# Debian 8 system e.g. use xorriso for UEFI support.
	108	# However, they use exactly the same command line parameters as mkisofs, so just
	109	# use it if it's available.
	110	ISO_CMD="/usr/bin/xorriso"
	111
	112	# Mandriva system e.g. use cdrkit, which uses genisoimage.
	113	# However, they use exactly the same command line parameters as mkisofs, so just
	114	# use it if it's available.
	115	if [ ! -x $ISO_CMD ]; then
[3505]	116	ISO_CMD="/usr/bin/genisoimage"
[3515]	117	# For compatibility with previous versions default to mkisofs
	118	if [ ! -x $ISO_CMD ]; then
	119	ISO_CMD="/usr/bin/mkisofs"
	120	fi
	121	if [ ! -x $ISO_CMD ]; then
	122	LogFile "NOTE: No CD image (ISO file) utility found"
	123	ISO_CMD = ""
	124	fi
	125	else
	126	ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]	127	fi
	128
[3596]	129	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
[925]	130
[3421]	131	# Mindi set this as default in case it's invoked alone
	132	BOOT_TYPE="BIOS"
	133	# and we also check whether we're UEFI or not.
	134	if [ -d "/sys/firmware/efi" ]; then
	135	BOOT_TYPE="UEFI"
[3429]	136	else
	137	# Find MBR in case of bootable USB device to build
	138	MBRFILE=/usr/lib/syslinux/mbr.bin
	139	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
	140	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
	141	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
	142	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3421]	143	fi
[3403]	144
[2880]	145	# Function to log on screen only
	146	LogScreen() {
[3368]	147	if [ -e /dev/stderr ] ; then
	148	echo -e "$1" >> /dev/stderr
	149	elif [ -e /usr/bin/logger ] ; then
	150	/usr/bin/logger -s $1
	151	fi
[2880]	152	}
[2685]	153
[2880]	154	# Function to log in log file only
	155	LogFile() {
	156
[3368]	157	echo -e "$1" >> $LOGFILE
	158	if [ _"$2" != _"" ]; then
[3403]	159	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]	160	rm -f "$2"
[3368]	161	fi
[2880]	162	}
	163
	164	# Function to log in both screen and logfile
	165	LogAll() {
[3368]	166	LogScreen "$1"
	167	LogFile "$1" "$2"
[2880]	168	}
	169
[2963]	170	# Last function called before exiting
	171	# Parameter is exit code value
	172	# Should be declared here as used immediately below potentialy
	173	MindiExit() {
[3522]	174	LogFile "INFO: Mindi $MINDI_VERSION is exiting"
	175	LogFile "INFO: End date : `date`"
[2963]	176	if [ _"$MONDO_SHARE" != _"" ] ; then
	177	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]	178	if [ -f $LOGFILE ]; then
	179	cat $LOGFILE >> /var/log/mondoarchive.log
	180	else
	181	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
	182	fi
[2963]	183	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
	184	fi
[2880]	185
[2963]	186	cd /
	187	sync&
	188
	189	# Clean temporary files only when standalone mindi
	190	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
	191	rm -Rf $MINDI_TMP
	192	fi
	193	exit $1
	194	}
	195
[2685]	196	Die() {
	197	if [ "$1" = "" ] ; then
[3149]	198	LogAll "FATAL ERROR"
[2685]	199	else
[3149]	200	LogAll "FATAL ERROR. $1"
[2685]	201	fi
	202	if [ _"$2" != _"" ]; then
[3403]	203	grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]	204	fi
	205	rm -f "$2"
	206
[3149]	207	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
	208	LogAll "See http://www.mondorescue.org for more information."
	209	LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]	210	MindiExit -1
	211	}
	212
[1485]	213	# Now we can create what we need
[2150]	214	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
	215	if [ $? -ne 0 ]; then
	216	df $TMPDIR
	217	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
	218	fi
[2153]	219	if [ _"$MINDI_TMP" = _"" ]; then
	220	Die "MINDI_TMP is empty, aborting"
	221	fi
	222	if [ _"$MINDI_TMP" = _"/" ]; then
	223	Die "MINDI_TMP is /, aborting"
	224	fi
[2150]	225	export MINDI_TMP
[940]	226
[747]	227	# ----------------------------------------------------------------------------
	228
	229
	230	AbortHere() {
	231	Die "Program is terminating in response to signal received from OS/user"
	232	}
	233
	234
	235	Aborted() {
	236	trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]	237	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
[747]	238	Die "User abort."
	239	}
	240
	241
	242	AddFileToCfgIfExists() {
	243	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
	244	}
	245
	246
	247	AddKeyboardMappingFile() {
	248	local mappath r included_list included_item i res ii sss
	249	mappath=$1
	250	KBDEPTH=$(($KBDEPTH+1))
	251	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
	252	if [ -e "$bigdir/$mappath" ] ; then
[3149]	253	LogFile "INFO: $mappath already added"
[747]	254	return
	255	elif [ -d "$bigdir/$mappath" ] ; then
	256	echo "Cannot add $mappath: it's a directory. Sorry."
	257	return
	258	fi
[3149]	259	LogFile "INFO: Added kbd map $mappath"
[747]	260	if [ ! -e "$mappath" ] ; then
[3149]	261	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[747]	262	if [ ! -e "$mappath" ] ; then
[3149]	263	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]	264	return
	265	fi
	266	fi
	267
[3149]	268	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]	269	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
[3023]	270	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
[747]	271	else
[3023]	272	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
[747]	273	fi
	274	for included_item in $included_list ; do
[925]	275	if [ ! -e "$included_item" ] ; then
[3149]	276	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]	277	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]	278	for ii in $sss ; do
[3546]	279	[ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]	280	done
	281	else
	282	AddKeyboardMappingFile $included_item
	283	fi
[747]	284	done
	285	}
	286
	287
	288	CopyDependenciesToDirectory() {
[3403]	289	local outdir incoming counter d found tdir templog
[747]	290	outdir=$1
[3403]	291	templog=$MINDI_TMP/$$.log
[747]	292	mkdir -p $outdir
	293	incoming=`ReadLine`
[3522]	294	counter=$3
[3403]	295	> $templog
	296
[747]	297	while [ "$incoming" != "" ] ; do
[3522]	298	if [ "$3" = "1" ]; then
	299	counter=$(($counter+1))
	300	LogProgress $counter $2
	301	fi
[1526]	302	# Non absolute file names should not arrive till here => skipped
	303	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
[3149]	304	LogAll "WARNING: Unable to handle $incoming"
[1526]	305	incoming=`ReadLine`
	306	continue
	307	fi
	308	# no parent directory of incoming should be a link, copy is not possible in that case
	309	d=`dirname "$incoming"`
	310	found="false"
	311	while [ $d != "/" -a $found = "false" ]; do
	312	[ -h "$d" ] && found="true"
	313	d=`dirname "$d"`
	314	done
[3166]	315	if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]	316	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0 0
[1526]	317	elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]	318	if [ ! -h "$incoming" ]; then
[3405]	319	tar cf - -C / $incoming 2> $templog \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]	320	else
	321	tdir=`dirname "$incoming"`
	322	if [ ! -e "$outdir/$tdir" ]; then
	323	mkdir -p "$outdir/$tdir"
	324	fi
	325	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
	326	fi
[1989]	327	# Only uncompress modules if not using udevd
	328	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
[3149]	329	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]	330	fi
[3075]	331	[ -x "$outdir" ] && StripExecutable $outdir
[747]	332	fi
	333	incoming=`ReadLine`
	334	done
	335	}
	336
	337
	338	CountItemsIn() {
	339	local r
	340	r=0
	341	for q in $1 ; do
	342	r=$(($r+1))
	343	done
	344	echo $r
	345	}
	346
	347
	348	DropOptimizedLibraries() {
	349	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
	350	filelist=$1
	351	outdir=$2
	352
	353	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
	354	if [ "$list_of_optimized_libraries" = "" ] ; then
[859]	355	return 0
[747]	356	fi
	357	echo -en "Dropping i686-optimized libraries if appropriate"
	358	for optimized_lib_name in $list_of_optimized_libraries ; do
[859]	359	echo -en "."
	360	reason=""
[1483]	361	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[859]	362	echo "$vanilla_lib_name" >> $filelist
[2963]	363	LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]	364	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
	365	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]	366
	367	# This may return multiple files
[3231]	368	for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]	369	LogFile "INFO: Adding as deps $resolved to filelist"
[2168]	370	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
[3149]	371	if [ "$vanilla_resolved_name" != "$resolved" ]; then
	372	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
	373	rmdir $outdir$resolved > /dev/null 2> /dev/null
	374	ln -sf $vanilla_resolved_name $outdir$resolved
	375	LogFile "INFO: Excluding deps $resolved"
	376	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
	377	LogFile "INFO: Replacing it with $vanilla_resolved_name"
	378	echo "$vanilla_resolved_name" >> $filelist.tmp
	379	mv -f $filelist.tmp $filelist
	380	fi
[2168]	381	done
[747]	382	done
[925]	383	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
[747]	384	mv -f $filelist.tmp $filelist
	385	echo -e "$DONE"
	386	}
	387
	388
	389	FindAndAddUserKeyboardMappingFile() {
	390	local r res mapfile mappath included_item included_list keyfile mp locale
[3149]	391	LogAll "INFO: Analyzing your keyboard's configuration."
[3231]	392	KEYDIR=/usr/lib/kbd
[747]	393	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
[3347]	394	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
	395	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]	396	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]	397	if [ ! -e "$KEYDIR" ] ; then
[3149]	398	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]	399	return 0
[3569]	400	else
	401	LogFile "INFO: KEYDIR=$KEYDIR"
[747]	402	fi
	403	if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]	404	LogFile "INFO: Red Hat-style config detected."
[747]	405	keyfile=/etc/sysconfig/keyboard
[3257]	406	elif [ -e "/etc/vconsole.conf" ] ; then
	407	LogFile "INFO: New Fedora style config detected."
	408	keyfile=/etc/vconsole.conf
[747]	409	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]	410	LogFile "INFO: Slackware-style config detected."
[747]	411	keyfile=/etc/rc.d/rc.keymap
	412	elif [ -e "/etc/rc.config" ] ; then
[2963]	413	LogFile "INFO: Debian-style config detected."
[747]	414	keyfile=/etc/rc.config
	415	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]	416	LogFile "INFO: Debian-style config detected."
[747]	417	mkdir -p $bigdir/tmp
[3278]	418	echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]	419	KBDEPTH=0
	420	mkdir -p $bigdir/etc/console
[963]	421	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]	422	echo ""
[747]	423	echo -e "$DONE"
	424	return 0
[2828]	425	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]	426	LogFile "INFO: Ubuntu-style config detected."
[1713]	427	mkdir -p $bigdir/tmp
[2828]	428	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
	429	kbdfile="/etc/console-setup/boottime.kmap.gz"
	430	else
	431	kbdfile="/etc/console-setup/cached.kmap.gz"
	432	fi
[3278]	433	echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]	434	KBDEPTH=0
	435	mkdir -p $bigdir/etc/console-setup
[2828]	436	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]	437	echo ""
[1713]	438	echo -e "$DONE"
	439	return 0
[3595]	440	elif [ -e "/etc/default/keyboard" ]; then
	441	LogFile "INFO: New Debian-style config detected."
	442	keyfile=/etc/default/keyboard
[2744]	443	elif [ -e "/etc/rc.conf" ] ; then
[2963]	444	LogFile "INFO: ArchLinux config detected."
[2744]	445	keyfile=/etc/rc.conf
[1465]	446	elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]	447	LogFile "INFO: Gentoo-style config detected."
[1465]	448	keyfile=/etc/conf.d/keymaps
[3191]	449	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
	450	LogFile "INFO: X11-style config detected."
	451	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]	452	else
[3149]	453	LogFile "Searching for rc.config ..."
[747]	454	keyfile=`find /etc -name rc.config \| head -n1`
	455	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
[3149]	456	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]	457	return
	458	else
[2963]	459	LogFile "INFO: Found $keyfile"
[747]	460	fi
	461	fi
	462	if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]	463	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]	464	return
	465	fi
[2963]	466	LogFile "INFO: keyfile=$keyfile"
[2999]	467	# For SLES we need to remove the .map.gz extension Cf #614
	468	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
[747]	469	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
[3595]	470	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
[3191]	471	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
[3595]	472	[ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" \| grep -v '^#' \| cut -d= -f2 \| tr -d '"'` # New Debian 8+
[2963]	473	LogFile "INFO: locale=$locale"
[1764]	474	#
	475	# Process the keymaps dir once for all
	476	# AddKeyboardMappingFile will use it recursively
	477	#
	478	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
	479	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
	480	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
[3571]	481	# For new distro such as RHEL 7 we need that additional search
	482	[ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find \| grep -E "/$locale\." \| grep -vx " #."`
[747]	483	# If we have multiple keymaps then log it !!
[3149]	484	echo "$mp" \| grep -q " " >> $LOGFILE
[747]	485	if [ $? -eq 0 ]; then
[2963]	486	LogAll "WARNING: Multiple keymaps found: $mp"
	487	LogFile "INFO: The following one will be used"
[747]	488	fi
	489	for i in $mp ; do
	490	mappath=$i
	491	[ -e "$i" ] && [ ! -d "$i" ] && break
	492	done
	493	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3688]	494	mappath=$(find /usr /lib /lib64 -path "/kbd/keymaps//$locale \| head -1")
[747]	495	fi
[2963]	496	LogFile "INFO: mappath = $mappath"
[747]	497	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
[3149]	498	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]	499	return
	500	fi
[3535]	501	echo -en "INFO: Adding keyboard mapping tables"
[747]	502	mkdir -p $bigdir/tmp
[3278]	503	echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]	504	KBDEPTH=0
[747]	505	AddKeyboardMappingFile $mappath
	506	echo -e "$DONE"
[1764]	507	rm -f $MINDI_TMP/keymaps.find
[747]	508	return 0
	509	}
	510
	511
[3241]	512	FindLdlinux32Binary() {
	513	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
	514	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
	515	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
	516	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
	517	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]	518	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
	519	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]	520	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
	521	if [ ! -e "$LDLINUXC32" ]; then
	522	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
	523	LDLINUXC32=/tmp/idoesnthopefullyexist
	524	else
	525	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
	526	fi
	527	}
	528
	529
[2629]	530	FindMboot32Binary() {
	531	MBOOTC32=/usr/lib/syslinux/mboot.c32
	532	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
	533	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
	534	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
	535	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]	536	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
	537	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]	538	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
[2921]	539	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	540	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]	541	}
	542
[3476]	543	FindLdlinuxe64Binary() {
	544	LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
	545	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
	546	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
	547	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
	548	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
	549	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
	550	[ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 \| grep -x "/.*/ldlinux.e64"`
	551	[ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
	552	LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
	553	}
	554
	555	FindSyslinux64EFI() {
	556	SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
	557	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
	558	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
	559	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
	560	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
	561	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
	562	[ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi \| grep -x "/.*64/syslinux.efi"`
[3491]	563	[ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]	564	LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
	565	}
	566
[747]	567	FindIsolinuxBinary() {
	568	ISOLINUX=/usr/lib/isolinux.bin
	569	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]	570	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]	571	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
	572	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]	573	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]	574	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]	575	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
[2921]	576	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]	577	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]	578	}
	579
	580
	581	GenerateGiantDependencyList() {
[3522]	582	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]	583
[3522]	584	echo -en "INFO: Analyzing dependency requirements"
[747]	585	outfile=$1
[940]	586	tempfile=$MINDI_TMP/$$.txt
[747]	587	incoming=`ReadLine`
	588
	589	> $tempfile
	590	progress=0
	591	res=0
	592	noof_lines=$2
	593	while [ "$incoming" != "" ] ; do
[861]	594	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	595	incoming=`ReadLine`
	596	continue
	597	fi
	598	if [ "$incoming" = "LVMFILES:" ] ; then
	599	break
	600	fi
[747]	601	filelist=`GenerateListForFile "$incoming"`
	602	r=$?
[3149]	603	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]	604	res=$(($res+$r))
[2963]	605	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]	606	for fname in $filelist ; do
[3321]	607	[ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]	608	done
	609	progress=$(($progress+1))
[3149]	610	LogProgress $progress $noof_lines
[747]	611	incoming=`ReadLine`
	612	done
[861]	613	if [ "$incoming" = "LVMFILES:" ] ; then
	614	incoming=`ReadLine`
	615	lvmversion=""
	616	while [ "$incoming" != "" ] ; do
	617	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
	618	incoming=`ReadLine`
	619	continue
	620	fi
	621	filelist=`GenerateListForFile "$incoming"`
	622	for tool in $filelist ; do
[3662]	623	lvmresolved=`readlink -f $tool`
	624	if [ "$tool" = "$lvmresolved" ]; then
	625	echo "$tool" >> $tempfile
	626	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
	627	if [ "$lvmversion" = "" ] ; then
	628	lvmversion=`$lvmresolved`
	629	echo "$lvmresolved" >> $tempfile
	630	fi
	631	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
	632	if [ "$lvmversion" = "200" ]; then
	633	# pvdata and lvmcreate_initrd don't exist in LVM2
	634	case "$toolstripped" in
	635	"pvdata")
[861]	636	continue
	637	;;
[3662]	638	"lvmcreate_initrd")
[861]	639	continue
	640	;;
	641	esac
[3662]	642	fi
	643	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
	644	if [ -e "$toolpath" ] ; then
[861]	645	echo "$toolpath" >> $tempfile
	646	echo "$tool" >> $tempfile
[3662]	647	else
[861]	648	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
[3662]	649	fi
	650	if [ -e "$toolpath" ] ; then
	651	echo "$toolpath" >> $tempfile
	652	echo "$tool" >> $tempfile
[861]	653	else
[3662]	654	echo "Where are your LVM-Tools? Couldn't find $tool"
	655	fi
	656	else
[861]	657	echo "$tool" >> $tempfile
	658	fi
	659	done
	660	progress=$(($progress+1))
[3149]	661	LogProgress $progress $noof_lines
[861]	662	incoming=`ReadLine`
	663	done
[747]	664	fi
[3661]	665	echo -e "$DONE"
[747]	666
[3661]	667	echo -en "INFO: Making complete dependency list..."
[747]	668	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
	669	mv -f $tempfile.new $tempfile
	670	> $outfile.pre
	671	progress=0
	672	noof_lines=`cat $tempfile \| wc -l`
[2963]	673	LogFile "---------------------------------"
	674	LogFile "List of dependencies: "
	675	LogFile "---------------------------------"
[747]	676	for fname in `cat $tempfile` ; do
[1876]	677	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
	678	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
[925]	679	progress=$(($progress+1))
[3149]	680	LogProgress $progress $noof_lines
[747]	681	done
[1684]	682	if [ _"$MONDO_SHARE" != _"" ]; then
[925]	683	mkdir -p $bigdir/tmp
[3172]	684	mkdir -p $bigdir/usr/bin
[940]	685	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]	686	LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]	687	(cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]	688	fi
[963]	689	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[3661]	690	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
[925]	691	else
[3565]	692	LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
	693	LogAll " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[3661]	694	LogAll " If Mindi was called by Mondo then send a bug report."
[3565]	695	LogAll " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
	696	LogAll " Finally, run Mindi again."
[3661]	697	Die "Odd."
[925]	698	fi
[3565]	699	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]	700	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]	701	LogAll "\nINFO: Incorporating Network-related settings"
[3278]	702	for r in NETFS-* ; do
[963]	703	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
[2963]	704	LogFile "INFO: Copying $r to ramdisk"
[925]	705	done
	706	fi
[747]	707	fi
[925]	708	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
[747]	709	rm -f $tempfile $outfile.pre
[3661]	710	[ "$res" -eq "0" ] && echo -e "$DONE" \|\| echo "\nFailed."
[747]	711	return $res
	712	}
	713
	714
	715	GenerateListForFile() {
[3692]	716	local files_found fname incoming
[747]	717	incoming="$1"
	718	files_found=""
	719
	720	for fname in $incoming ; do
	721	files_found="$files_found `LocateFile $fname`"
	722	done
	723
	724	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
	725	}
	726
	727
	728	# Returns all disk devices which are part of a raid array
	729	GetAllRaidMembers() {
	730	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
	731	}
	732
	733
	734	GetFileSizeList() {
	735	local i
	736	for i in `find $1 -type d -o -print` ; do
	737	du -sk $i
	738	done
	739	}
	740
	741
[1230]	742	# Check kernel filesystem capabilites for accessing initrd image
[2429]	743	# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]	744	#
	745	# Interface definition:
	746	# param #1: absolute path to kernel image
	747	GetInitrdFilesystemToUse() {
	748
	749	# interface test: make sure we have one parameter
	750	if [ $# -ne 1 ]; then
	751	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
	752	fi
	753
	754	# interface parameters
	755	local lvKernelImage=$1
	756
	757	# local constants (filesystem magic strings)
	758	local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]	759	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]	760	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]	761	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
[1230]	762
	763	# local variables
	764	local lvOffset
	765	local lvScanRes
	766	local lvUseFilesystem
	767
	768	# say where we are.
[3111]	769	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]	770
	771	# verify that file exists
	772	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
	773
[3111]	774	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]	775	file $lvKernelImage 2>&1 \| grep -q gzip
[1566]	776	if [ $? -eq 0 ]; then
[3111]	777	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
	778	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
	779	else
	780	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
	781	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
	782	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
	783	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
	784	if [ $lvOffset -eq 0 ]; then
	785	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
	786	lvScanRes=$lcMagicInitfs
[2393]	787	else
[3111]	788	lvOffset=`expr $lvOffset / 2`
	789	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
	790	# scan again kernel image
	791	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
[2393]	792	fi
[3111]	793	fi
[2393]	794
[3111]	795	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
	796	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
	797	lvUseFilesystem="ext2fs"
	798	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
	799	lvUseFilesystem="ext3fs"
	800	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
	801	lvUseFilesystem="initramfs"
	802	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
	803	lvUseFilesystem="cramfs"
[2429]	804	else
[3111]	805	# In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]	806	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
	807	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
	808	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
[1230]	809	lvUseFilesystem="initramfs"
	810	fi
[3111]	811
[1230]	812	# say what we are using
[3111]	813	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]	814
	815	# return file system to use
	816	echo "$lvUseFilesystem"
	817
	818	}
	819
[747]	820	# Searches members of raid device
	821	# $1: raid device (/dev/md...)
	822	GetRaidDevMembers() {
[2917]	823	if [ ! -f /etc/raidtab ]; then
	824	return
	825	fi
[747]	826	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
	827	}
	828
	829
	830	ListAllPartitions() {
[2070]	831	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
[747]	832	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]	833	if [ -e "/vmfs/volumes" ]; then
	834	# For VMWare ESX 3 get the device names of these volumes
[2431]	835	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
[1824]	836	fi
[747]	837	return
	838	}
	839
	840
	841	ListKernelModulePaths() {
[2583]	842	local module_list module fname r kern
[1399]	843	module_list="$MODULES"
[1230]	844	# Remove unwanted modules from list
	845	for i in $DENY_MODS; do
	846	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	847	done
[747]	848	###
	849	### Sq-Modification ... Use kernelname for module search path if specified
	850	###
[3231]	851	if [ "${kernelname}" != "" ]
[747]	852	then
	853	kern=${kernelname}
	854	else
[2292]	855	kern="$KERVERRUN"
[747]	856	fi
[2292]	857	export KERVER=$kern
[747]	858	###
	859	### Sq-Mod End
	860	###
[3310]	861	# Get rid of duplicates
	862	for module in `echo $module_list \| tr ' ' '\n' \| sort -u` ; do
[747]	863	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
[2471]	864	if [ -z "$r" ]; then
	865	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
	866	r="[live module file not found]"
	867	else
	868	r="[extra module file not found]"
	869	fi
[2583]	870	else
	871	[ -f "$r" ] && echo "$r"
[2471]	872	fi
[2963]	873	LogFile "INFO: module $module --> $r"
[747]	874	done
	875	find /lib/modules/$kern/modules.* -type f 2> /dev/null
	876	}
	877
[1784]	878	#
	879	# Critical function which computes all dependencies (dyn. lib.)
	880	# for a list of binaries
	881	#
[747]	882	LocateDeps() {
	883	local incoming fname deps
[1724]	884	incoming="$*"
[3231]	885	deps=""
	886
[747]	887	for fname in $incoming ; do
	888	if [ ! -e "$fname" ] ; then
[3661]	889	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]	890	if echo $fname \| grep lvm &> /dev/null ; then
[2963]	891	LogFile " This warning only affects you if you are using LVM."
[1399]	892	if echo "$MODULES" \| grep lvm &> /dev/null ; then
[3231]	893	LogFile " I think you are, so please take heed!"
[747]	894	else
[3231]	895	LogFile " I don't think you are, so don't worry about it."
[747]	896	fi
	897	fi
	898	else
[3231]	899	deps="$deps $fname"
[747]	900	fi
	901	done
[3692]	902	mr-read-all-link `mr-process-ldd $deps \| sort -u` $deps \| sort -u
[747]	903	}
	904
[925]	905
[747]	906	LocateFile() {
[3692]	907	local j dn newdn bn path fname_to_find output
[747]	908	fname_to_find="$1"
[1526]	909	# It's an absolute path
[3231]	910	j=`echo "$fname_to_find" \| cut -c1`
	911	if [ _"$j" = _"/" ]; then
	912	dn=`dirname $fname_to_find`
	913	# We suppose that the link is already included, just add the new file
	914	if [ -h "$dn" ]; then
	915	newdn=`readlink -f $dn`
	916	bn=`basename $fname_to_find`
	917	output="$newdn/$bn"
	918	else
	919	output="$fname_to_find"
	920	fi
[860]	921	if [ -h "$output" ] ; then
[3231]	922	output="`mr-read-all-link $output` $output"
[860]	923	fi
[859]	924	echo "$output"
	925	return 0
[747]	926	fi
[1526]	927	# It's not an absolute path
[747]	928	output=""
[1526]	929	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
	930	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
	931	[ -h "$path" ] && continue
	932	[ ! -e "$path/$fname_to_find" ] && continue
	933	output="$path/$fname_to_find $output"
	934	if [ -h "$path/$fname_to_find" ] ; then
[3231]	935	output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]	936	fi
[747]	937	done
	938	if [ "$output" = "" ] ; then
[860]	939	return 1
[747]	940	fi
	941	echo "$output"
	942	return 0
	943	}
	944
[3149]	945	LogProgress() {
[3293]	946	local i progress modres noof_lines title
[3149]	947
	948	progress=$1
	949	noof_lines=$2
[3293]	950	title=$3
[747]	951
[3149]	952	i=$(($progress*100))
	953	if [ $noof_lines -ne 0 ]; then
	954	i=$(($i/$noof_lines))
	955	else
	956	i=0
	957	fi
[3293]	958
	959	if [ _"$MONDO_SHARE" != _"" ]; then
	960	echo "$title $i%"
	961	else
	962	echo -en "\r\t\t\t\t\t\t\t\t"
	963	echo -en "$i"
	964	echo -en "%"
	965	modres=$(($progress%4))
	966	[ "$modres" -eq "0" ] && echo -en "\t/"
	967	[ "$modres" -eq "1" ] && echo -en "\t-"
	968	[ "$modres" -eq "2" ] && echo -en "\t\\"
	969	[ "$modres" -eq "3" ] && echo -en "\t\|"
	970	fi
[3149]	971	}
	972
[3692]	973	# Called by PrepareTargetDir, to make /tmp/$MRCFG
[747]	974	MakeMondoConfigFile() {
[3692]	975	local outfile use_lzo use_comp use_star use_gzip use_lzma
[747]	976	outfile=$1
	977	> $outfile
	978	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
	979	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
[1698]	980	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
[747]	981	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
	982	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
	983	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
	984	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]	985	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]	986	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]	987	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
	988	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
	989	echo "use-lzo $use_lzo" >> $outfile
[998]	990	echo "use-gzip $use_gzip" >> $outfile
[747]	991	echo "use-star $use_star" >> $outfile
[3149]	992	echo "use-lzma $use_lzma" >> $outfile
[747]	993	echo "use-comp $use_comp" >> $outfile
[3397]	994	echo "boot-type $BOOT_TYPE" >> $outfile
[747]	995	echo "datestamp `date`" >> $outfile
	996	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]	997	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
	998	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
	999	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
[3278]	1000	AddFileToCfgIfExists $MINDI_TMP/ISO-DIR iso-dir $outfile
[940]	1001	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
	1002	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
[3278]	1003	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
[940]	1004	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
	1005	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
	1006	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
[3278]	1007	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
	1008	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
	1009	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
	1010
[3270]	1011	# Deal with network configuration in a portable way
	1012	if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
	1013	mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
	1014	fi
[747]	1015	}
	1016
[2618]	1017	# Get PV's for an LV
	1018	GetPVsForLV() {
[3692]	1019	local vg
	1020
[3368]	1021	if [ -n "$1" ]; then
	1022	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
	1023	if [ -z "$vg" ]; then
	1024	return
	1025	fi
	1026	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
	1027	fi
[2618]	1028	}
[747]	1029
[2618]	1030
[747]	1031	MakeMountlist() {
[2907]	1032	local mountlist all_partitions current_partition \
[747]	1033	partition_size partition_format outstring partition_number \
	1034	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]	1035	absolute_partition old_partition_fmt current_lvolume uname skip
[747]	1036
[3149]	1037	LogFile "------------------------------------"
[3522]	1038	LogFile "INFO: Your raw fstab file looks like this:"
[2963]	1039	LogFile "------------------------------------"
[747]	1040	cat $MY_FSTAB >> $LOGFILE
[3149]	1041	LogAll "-----------------------------------"
[3522]	1042	LogAll "INFO: Your mountlist will look like this:"
[3149]	1043	LogAll "-----------------------------------"
[747]	1044
[2907]	1045	# mountlist(OUT)
[747]	1046	mountlist=$1
	1047
	1048	# NB: partition = device
	1049	# NB: mountpt = where the device is mounted
	1050
	1051	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
	1052
[3565]	1053	[ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]	1054	> $mountlist
	1055	all_partitions=""
	1056
	1057	if [ $LVM != "false" ]; then
[3499]	1058	LogFile "INFO: Analyzing LVM..."
[968]	1059	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]	1060	if [ $? -ne 0 ]; then
[963]	1061	LVM="false"
	1062	fi
[2536]	1063	# Excluded LVs and GVs are not reported here
[2424]	1064	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
[747]	1065	fi
	1066	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
	1067	for i in $IMAGE_DEVS ; do
	1068	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
	1069	done
	1070	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
[3149]	1071	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
	1072	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
[3028]	1073	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]	1074	for c_p in $all_partitions ; do
[2917]	1075	# Skip fd/cd devices, network FS, cifs
[2452]	1076	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
[747]	1077	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
	1078	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
[861]	1079	current_partition=`readlink -f $c_p`
[3046]	1080	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
	1081	current_partition="$c_p"
	1082	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
[3059]	1083	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]	1084	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]	1085	fi
[747]	1086	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
	1087	else
	1088	current_partition="$c_p"
	1089	fi
	1090	[ "$c_p" = "none" ] && continue
	1091	redhat_label=""
[1831]	1092	label=""
[957]	1093	uuid=""
[861]	1094	absolute_partition=`readlink -f $c_p`
[2965]	1095	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[747]	1096
[1986]	1097	# set default in case we dont't find it
	1098	str_to_find_fmt_with=$current_partition
	1099
[747]	1100	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
	1101	# current_partition contains only first column of /etc/fstab
[2965]	1102	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
[980]	1103	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
[747]	1104	actual_dev=""
[853]	1105
	1106	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1107	if [ -x "/sbin/findfs" ]; then
[2847]	1108	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]	1109	fi
[747]	1110
[853]	1111	# 2nd try : blkid, the good way for all LABEL except swap
	1112	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1113	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
[747]	1114	# For LVM FS it will give a /dev/dm-# which should then be converted
[748]	1115	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1116	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1117	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[747]	1118	for dev in `ls /dev/mapper/*`; do
[963]	1119	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1120	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[747]	1121	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1122	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[747]	1123	break
	1124	fi
	1125	done
	1126	fi
	1127	fi
	1128
[853]	1129	# 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]	1130	# For LVM gives a /dev/mapper entry
	1131	if [ "x$actual_dev" = "x" ]; then
[2965]	1132	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
[747]	1133	fi
	1134
[853]	1135	# 4th try, with vol_id
[747]	1136	# SWAP only
	1137	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1138	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
[747]	1139	for dev_swap in $list_swaps ; do
[2965]	1140	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
[747]	1141	if [ "x$dev_exists" != "x" ]; then
	1142	actual_dev=$dev_swap
	1143	break;
	1144	fi
	1145	done
	1146	fi
	1147
[853]	1148	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]	1149	# LABEL=SW-cciss/c0d0p3 (RDP)
[853]	1150	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]	1151	# SWAP only
[2965]	1152	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
[2013]	1153	skip=""
[2292]	1154	uname=$KERVERRUN
[2013]	1155	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
	1156	# 2.6.12 needs 16 (FC3)
	1157	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
	1158	# 2.6.19 and upper needs 1052
	1159	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
	1160	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]	1161	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
[2013]	1162	if [ $skip = "" ]; then
	1163	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
	1164	fi
[853]	1165	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
	1166	do
	1167	# Location of the swap label for kernel 2.6
[2013]	1168	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]	1169	if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]	1170	actual_dev=$try_dev
[853]	1171	fi
	1172	done
[747]	1173	fi
[1008]	1174
	1175	# Check if one of all those tries has known success
	1176	if [ "x$actual_dev" != "x" ]; then
	1177	current_partition=$actual_dev
	1178	else
[1885]	1179	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
[1008]	1180	fi
[957]	1181	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
	1182	# current_partition contains only first column of /etc/fstab
[2965]	1183	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
[980]	1184	uuid=`echo "$current_partition" \| cut -d'=' -f2`
[957]	1185	actual_dev=""
	1186
	1187	# 1st try, findfs - the RHEL way of finding labels and their partitions
	1188	if [ -x "/sbin/findfs" ]; then
	1189	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
	1190	fi
	1191
[1531]	1192	# 2nd try : blkid, the good way for all UUID except swap
[957]	1193	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]	1194	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
[957]	1195	# For LVM FS it will give a /dev/dm-# which should then be converted
	1196	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
[963]	1197	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
	1198	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
[957]	1199	for dev in `ls /dev/mapper/*`; do
[963]	1200	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
	1201	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
[957]	1202	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]	1203	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
[957]	1204	break
	1205	fi
	1206	done
	1207	fi
	1208	fi
	1209
	1210	# 3th try, with vol_id
	1211	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]	1212	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
[957]	1213	for dev in $list_dev ; do
[2965]	1214	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
[957]	1215	if [ "x$dev_exists" != "x" ]; then
	1216	actual_dev=$dev
	1217	break;
	1218	fi
	1219	done
	1220	fi
	1221
[1531]	1222	# 4th try, with dumpuuid (VMWare only ?) for swap
	1223	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]	1224	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
[1531]	1225	for dev in $list_dev ; do
[2965]	1226	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
[1531]	1227	if [ "x$dev_exists" != "x" ]; then
	1228	actual_dev=$dev
	1229	break;
	1230	fi
	1231	done
	1232	fi
	1233
[747]	1234	# Check if one of all those tries has known success
	1235	if [ "x$actual_dev" != "x" ]; then
	1236	current_partition=$actual_dev
	1237	else
[2069]	1238	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]	1239	fi
	1240	else
[1863]	1241	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
	1242	# they use symlinks in fstab unrelated to what is shown in mount !
	1243	if [ _"$partition_mountpt" = _"" ]; then
[1986]	1244	# set default in case we dont't find it
[2965]	1245	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
[3084]	1246	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]	1247	str_to_find_fmt_with=$tmpp
[2965]	1248	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
[1864]	1249	break;
[1863]	1250	fi
	1251	done
	1252	fi
[747]	1253	fi
	1254
[3084]	1255	# Detects noauto partitions not mounted and exclude them
	1256	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
	1257	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
	1258	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
	1259	continue
	1260	fi
	1261	# Detects bind partitions and exclude them
	1262	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
	1263	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
	1264	continue
	1265	fi
	1266
[2566]	1267	# Look for devices which have to be excluded
	1268	skip=0
	1269	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]	1270	l=""
[3231]	1271	list_of_devices="`mr-read-all-link $current_partition`"
[2568]	1272	for d in $list_of_devices; do
[2579]	1273	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]	1274	done
[2618]	1275
	1276	# Remove PVs from LVs excluded
	1277	l="$l `GetPVsForLV $current_partition`"
	1278
	1279	# We want a single unique list
[3522]	1280	list_of_devices="`echo $l \| tr ' ' '\n' \| sort -u`"
[2618]	1281
[2854]	1282	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
[2568]	1283	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
[2963]	1284	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]	1285	skip=1
	1286	continue
	1287	fi
	1288	done
	1289	fi
	1290	if [ $skip -eq 1 ]; then
	1291	continue
	1292	fi
	1293
[747]	1294	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
[3028]	1295	# Detects iso9660 ISO images and exclude them
	1296	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
[3064]	1297	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]	1298	continue
	1299	fi
[747]	1300	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
	1301	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
	1302	# the former is then a link to the latter, so we test whether
	1303	# $current_partition is actually such a link or not and set
[755]	1304	# $current_lvolume accordingly. On Debian you may find more than one answer
	1305	# so we remove the one corresponding to /dev/.static
	1306	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
	1307	# principle is the same and we need to find the link to it as well.
	1308	# Note that $current_lvolume may well be an
[747]	1309	# ordinary device. It is just to make sure that we feed the right value
	1310	# into any of the LVM tools if possible.
	1311
[3064]	1312	current_lvolume="$current_partition"
[763]	1313	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
[755]	1314	# .static dir are a Debian specificity
[763]	1315	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
[755]	1316	echo $current_lvolume \| grep -q ' '
[784]	1317	if [ $? -eq 0 ]; then
[2963]	1318	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]	1319	fi
[2072]	1320	# if it's not found, it may well be a real device such as a multipath one
	1321	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
	1322	if [ _"$current_lvolume" = _"" ]; then
	1323	current_lvolume="$current_partition"
	1324	fi
[747]	1325	fi
	1326	#
	1327	# End of LVM device style variation code (other than $current_lvolume).
	1328
[745]	1329	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
	1330	# Size computed via LVM not directly
[747]	1331	partition_size="lvm"
	1332	else
	1333	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
	1334	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
	1335	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
[2947]	1336	# Skip swap files
	1337	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
[2919]	1338	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
[747]	1339	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]	1340	[ "$partition_format" != "swap" ] && partition_format="swap"
[747]	1341	if [ "$partition_size" = "" ] ; then
[3368]	1342	totalsize=0
	1343	items=0
	1344	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
[747]	1345	totalsize=$(($totalsize+$i))
	1346	items=$(($items+1))
[3368]	1347	done
	1348	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
	1349	[ "$partition_size" -lt "125000" ] && partition_size=125000
	1350	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]	1351	fi
[2947]	1352	else
	1353	partition_size=`SizeOfPartition $current_partition`
[747]	1354	fi
	1355	fi
	1356	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
	1357	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
	1358	if [ "$partition_mountpt" = "" ] ; then
	1359	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
	1360	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
	1361	partition_mountpt="raid"
	1362	partition_format="raid"
	1363	else
	1364	partition_mountpt="lvm"
	1365	partition_format="lvm"
	1366	fi
	1367	fi
	1368	fi
	1369	psz=$partition_size
[2963]	1370	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]	1371	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
	1372	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
	1373	partition_mountpt="image"
	1374	old_partition_fmt=$partition_format
	1375	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
	1376	partition_size=$(($partition_size+1)); # just in case
	1377	if [ "$partition_format" = "Linux" ] ; then
[2963]	1378	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
	1379	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]	1380	partition_format=$old_partition_fmt
	1381	fi
	1382	fi
[2566]	1383
[747]	1384	if [ ! "$partition_mountpt" ] ; then
[2963]	1385	LogFile "------- $FDISK -l $qq log ------------"
[1883]	1386	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
[747]	1387	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
	1388	[ "$partition_format" ] && break
	1389	done
[2963]	1390	LogFile "------- $FDISK log end ------------"
[747]	1391	if [ "$partition_format" = "Compaq diagnostics" ] ; then
	1392	partition_format="compaq"
	1393	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
[3149]	1394	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]	1395	continue
	1396	fi
	1397	fi
[1755]	1398	if [ "$redhat_label" ]; then
	1399	label="$redhat_label"
[1756]	1400	elif [ "$uuid" ]; then
[1755]	1401	label="$uuid"
	1402	fi
[3330]	1403
	1404	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
	1405	# in order to mount the root part e.g. in grub.
	1406	# One way to solve this is to add the UUID now, if there wasn't one so it's
	1407	# restored correctly
	1408	if [ _"$label" = _"" ]; then
	1409	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
	1410	fi
	1411
[747]	1412	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]	1413	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]	1414	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]	1415	if [ "$current_partition" = "" ] ; then
[2963]	1416	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]	1417	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
	1418	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
	1419	partition_mountpt=raid
	1420	partition_format=raid
[3149]	1421	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1422	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1423	else
[2963]	1424	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]	1425	fi
	1426	elif [ "$partition_format" = "" ] ; then
[2963]	1427	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]	1428	elif [ "$partition_size" = "" ] ; then
[2963]	1429	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]	1430	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
	1431	continue
	1432	else
	1433	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
[3522]	1434	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]	1435	partition_format="vfat"
	1436	fi
[3149]	1437	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
[1755]	1438	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]	1439	fi
	1440	done
[3149]	1441	LogAll "-----------------------------------"
[747]	1442	}
	1443
[2432]	1444	CheckMountlist() {
	1445	local file=$1
	1446	# Coherency verification
[2529]	1447	ML01=`cat $file \| wc -l`
[2995]	1448	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
[2432]	1449	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
[3024]	1450	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
[2529]	1451	if [ "$ML01" -ne "$ML1" ]; then
[2963]	1452	LogFile "--------------------------------------------"
[3081]	1453	LogAll "WARNING: Duplicate device entry in mountlist"
[2963]	1454	LogFile "--------------------------------------------"
[2432]	1455	fi
[2529]	1456	if [ "$ML02" -ne "$ML2" ]; then
[2963]	1457	LogFile "--------------------------------------------"
	1458	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
	1459	LogFile "------------------------------------------------"
[2432]	1460	fi
	1461	}
[747]	1462
[3476]	1463
[3522]	1464	MakeISOErrors() {
[3421]	1465
[3522]	1466	LogFile "----------- $ISO_CMD's errors --------------"
[3596]	1467	LogAll "Command invoked: $CMD ."
[3522]	1468	LogAll "$ISO_CMD returned the following errors:"
	1469	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
	1470	LogAll "ERROR: Failed to create ISO image."
	1471	}
[3499]	1472
[3532]	1473	MakeISO() {
	1474
[3596]	1475	LogAll "INFO: Generating ISO image."
[3608]	1476	LOCISO=`echo $CMD \| perl -p -e 's\|.* -o (.+)/mindi.iso .*\|$1\|'`
[3532]	1477	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1478	if [ $? -ne 0 ] ; then
[3596]	1479	# In case of UEFI handle differences in option handling
[3532]	1480	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1481	CMD=`echo $CMD \| perl -p -e 's\|--efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|; s\|-efi-boot \|-eltorito-platform 0xEF -eltorito-boot \|;'`
	1482	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
[3596]	1483	if [ $? -ne 0 ] ; then
	1484	# xorriso e.g.
	1485	CMD=`echo $CMD \| perl -p -e 's\|-eltorito-platform 0xEF \|\|'`
	1486	(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
	1487	if [ $? -eq 0 ] ; then
	1488	LogAll "INFO: Invoking $CMD ."
[3608]	1489	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3596]	1490	else
	1491	MakeISOErrors
[3599]	1492	fi
[3596]	1493	else
	1494	LogAll "INFO: Invoking $CMD ."
[3608]	1495	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1496	fi
	1497	else
	1498	MakeISOErrors
	1499	fi
	1500	else
[3596]	1501	LogAll "INFO: Invoking $CMD ."
[3608]	1502	LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]	1503	fi
	1504	rm -f $MINDI_TMP/mkisofs.log
	1505	}
	1506
[3522]	1507	MakeBootableDevice() {
[3499]	1508
[3522]	1509	local target tbc retval part size mount_opt
	1510
	1511	target="$1"
	1512
	1513	rm -Rf $MINDI_TMP/target
	1514	mkdir -p $MINDI_TMP/target/{images,archives,tmp}
	1515
	1516	LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
	1517	cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE \|\| LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
	1518	for i in memdisk memtest.bin memtest.img ; do
	1519	j=$MINDI_LIB/$i
	1520	k=$MINDI_TMP/target
	1521	if [ -e "$j" ] ; then
	1522	LogAll "INFO: Copying $j to $k"
	1523	cp -f $j $k 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $k"
	1524	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MINDI_TMP"
	1525	if [ _"$MONDO_SHARE" != _"" ]; then
	1526	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]	1527	fi
[3522]	1528	fi
	1529	done
[3499]	1530
[3522]	1531	retval=0
	1532	LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
	1533	cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]	1534	if [ $? -ne 0 ] ; then
[3522]	1535	LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
	1536	retval=$(($retval+1))
	1537	fi
	1538	LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
	1539	cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]	1540	if [ $? -ne 0 ] ; then
[3522]	1541	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
	1542	retval=$(($retval+1))
	1543	fi
[3421]	1544
[3692]	1545	# copy boot stuff now generated in PrepareBigDir
[3522]	1546	if [ "$BOOT_TYPE" = "UEFI" ]; then
	1547	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
	1548	tbc="EFI"
[3528]	1549	# Also prepare a BIOS compatible boot
	1550	if [ "$target" = "ISO" ]; then
	1551	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
	1552	fi
[3522]	1553	else
	1554	(cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
	1555	tbc="syslinux"
	1556	if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
	1557	LogFile "----------- syslinux's conf --------------"
	1558	cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
	1559	LogFile "------------------------------------------"
	1560	fi
	1561	if [ "$target" = "ISO" ]; then
	1562	cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]	1563	if [ $? -ne 0 ] ; then
[3522]	1564	LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
	1565	retval=$(($retval+1))
[3476]	1566	fi
[3522]	1567	fi
	1568	fi
[3476]	1569
[3522]	1570	if [ "$ARCH" != "ia64" ] ; then
	1571	if [ $KERNEL_IS_XEN = "yes" ]; then
	1572	FindMboot32Binary
	1573	cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]	1574	if [ $? -ne 0 ] ; then
[3522]	1575	LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
	1576	retval=$(($retval+1))
[1885]	1577	fi
[3522]	1578	cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32 2>> $LOGFILE
[3528]	1579	if [ $? -ne 0 ] ; then
[3522]	1580	LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
	1581	retval=$(($retval+1))
	1582	fi
[747]	1583	fi
[3522]	1584	fi
[3499]	1585
[3522]	1586	MakeMessageFile $MINDI_TMP/target/$tbc \| cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
	1587
	1588	if [ _"$MONDO_SHARE" != _"" ]; then
	1589	cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]	1590	if [ $? -ne 0 ] ; then
[3522]	1591	LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
	1592	LogAll " Please check the target directory."
	1593	retval=$(($retval+1))
	1594	fi
	1595	if [ $KERNEL_IS_XEN = "yes" ]; then
	1596	cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]	1597	if [ $? -ne 0 ] ; then
[3522]	1598	LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
	1599	LogAll " Please check the target directory."
	1600	retval=$(($retval+1))
[3476]	1601	fi
[747]	1602	fi
[3522]	1603	cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]	1604	cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]	1605	if [ $? -ne 0 ] ; then
[3527]	1606	LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
	1607	LogAll " Please check the target directory."
	1608	retval=$(($retval+1))
	1609	fi
	1610	cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]	1611	if [ $? -ne 0 ] ; then
[3527]	1612	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
	1613	LogAll " Please check the target directory."
	1614	retval=$(($retval+1))
	1615	fi
[3522]	1616	fi
[747]	1617
[3522]	1618	if [ -f "$MINDI_TMP/$MRCFG" ]; then
	1619	cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
	1620	fi
[747]	1621
[3522]	1622	LogFile "----------- target dir content -----------"
	1623	LogFile "------------------------------------------"
	1624	ls -lR $MINDI_TMP/target >> $LOGFILE
	1625	LogFile "------------------------------------------"
	1626	LogFile "----------- target dir sizes -------------"
	1627	du -sk $MINDI_TMP/target/* >> $LOGFILE
	1628	LogFile "------------------------------------------"
[3692]	1629	LogFile "Kernel size = `du -sk $kernelpath \| cut -f1` K"
	1630	LogFile "--------------------------------"
[3476]	1631
[3522]	1632	if [ "$retval" -ne "0" ] ; then
[3546]	1633	sync
[3522]	1634	umount $MINDI_TMP/target
	1635	LogAll "ERROR: Problems while creating boot media."
	1636	LogAll " Please unload some of your modules and try again."
[3692]	1637	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1638	fi
[3476]	1639
[3522]	1640	mkdir -p $MINDI_TMP/mpt
[1684]	1641
[3522]	1642	if [ "$target" = "USB" ]; then
	1643	LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
	1644	LogAll "INFO: Checking $USBDEVICE"
[2924]	1645	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]	1646	if [ $? -ne 0 ]; then
[2963]	1647	LogAll "ERROR: Unable to access $USBDEVICE"
[3086]	1648	LogAll " Make sure your USB device is plugged in"
[2963]	1649	MindiExit -1
[1684]	1650	fi
[3149]	1651	# Some distro do auto mount at that point (Ubuntu)
[3522]	1652	LogAll "INFO: Unmounting $USBPART just in case"
[3546]	1653	sync
[1721]	1654	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]	1655	if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]	1656	# If your key has no MBR it may cause an issue
	1657	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
	1658	if [ -r $MBRFILE ]; then
	1659	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]	1660	dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]	1661	else
	1662	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
	1663	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
	1664	fi
[2855]	1665	fi
[3522]	1666	LogAll "INFO: Preparing $USBDEVICE"
[2851]	1667	cat > $MINDI_TMP/fdisk.txt << EOF
[2057]	1668	d
	1669	d
	1670	d
	1671	d
[1684]	1672	n
	1673	p
	1674	1
	1675
	1676
	1677	t
	1678	b
	1679	a
	1680	1
	1681	w
	1682	EOF
[2851]	1683	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]	1684	if [ $? -ne 0 ]; then
[2963]	1685	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]	1686	LogAll " Make sure your USB device is plugged in"
[1684]	1687	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1688	MindiExit -1
	1689	fi
[2963]	1690	LogFile "fdisk build file"
	1691	LogFile "----------------"
[2851]	1692	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]	1693	LogFile "----------------"
[2924]	1694	rm -f $MINDI_TMP/fdisk.txt
[3522]	1695	LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]	1696	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
[3006]	1697	# Calling kpartx in case devices were not created
[3033]	1698	if [ -x "/sbin/kpartx" ]; then
[3027]	1699	/sbin/kpartx -a $USBDEVICE
	1700	fi
[2461]	1701	# Some distro do auto mount at that point (Ubuntu)
[3522]	1702	LogAll "INFO: Unmounting $USBPART just in case again"
[3546]	1703	sync
[2461]	1704	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]	1705	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
	1706	if [ "`which dmsetup`" != "" ]; then
[3368]	1707	block_id="`echo $USBPART \| sed 's/\/dev\///g'`"
	1708	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
[3522]	1709	LogAll "INFO: Removing $block_id from device mapper."
[3368]	1710	sleep 1
	1711	dmsetup remove $block_id
	1712	fi
	1713	fi
[3522]	1714	part=$USBPART
	1715	mount_opt=""
	1716	else
	1717	# ISO image
	1718	part=$MINDI_TMP/mindi-bootroot.img
	1719	size=`du -sk $MINDI_TMP/target 2> /dev/null \| cut -f1`
	1720	# Adds 10 MB to allow for additional space
	1721	size=$(($size+10000))
	1722	LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
	1723	dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null \|\| Die "Cannot dd blank $part"
	1724	mount_opt="-o loop"
	1725	fi
	1726
	1727	LogAll "INFO: Creating a vfat filesystem on $part"
[3531]	1728
	1729	mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]	1730	if [ $? -ne 0 ]; then
	1731	LogAll "ERROR: Unable to create a vfat filesystem on $part"
	1732	if [ "$target" = "USB" ]; then
	1733	LogAll " Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]	1734	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1735	fi
[3522]	1736	MindiExit -1
	1737	fi
[3532]	1738	if [ "$target" = "ISO" ]; then
	1739	if [ "$BOOT_TYPE" = "BIOS" ]; then
	1740	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
	1741	# and run after the formating for versions > 6 it seems
	1742	syslinux $part >> $LOGFILE 2>> $LOGFILE
	1743	fi
	1744	fi
[3522]	1745	LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
	1746	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
	1747	if [ $? -ne 0 ]; then
	1748	LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
	1749	if [ "$target" = "USB" ]; then
	1750	LogAll " Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]	1751	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
	1752	fi
[3522]	1753	MindiExit -1
	1754	fi
	1755
	1756	LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
	1757	mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]	1758	if [ $? -ne 0 ] ; then
[3522]	1759	LogFile "--------------------------------"
	1760	LogFile "INFO: Size of $MINDI_TMP/mpt:"
	1761	du -sk $MINDI_TMP/mpt/* >> $LOGFILE
	1762	LogFile "--------------------------------"
[3546]	1763	sync
[3522]	1764	umount $MINDI_TMP/mpt
	1765	LogAll "ERROR: Problems while creating boot media."
	1766	LogAll " Please unload some of your modules and try again."
[3692]	1767	Die " Try using another temporary directory instead of $MINDI_TMP"
[3522]	1768	fi
	1769
	1770	if [ "$target" = "ISO" ]; then
[3534]	1771	if [ "$ARCH" != "ia64" ]; then
	1772	ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
	1773	fi
[3522]	1774	# ISO
[3533]	1775	if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]	1776	CMD="$ISO_CMD $ISO_OPT"
[3532]	1777	MakeISO
[3522]	1778	else
[3534]	1779	if [ "$ARCH" = "ia64" ]; then
	1780	CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
	1781	else
	1782	# UEFI
	1783	echo "$CMD" \| grep -q "xorriso"
	1784	if [ $? -eq 0 ]; then
[3598]	1785	XOV=`xorriso --version 2>&1 \| head -1 \| awk '{print $3}'`
	1786	XOVMAJ=`echo $XOV \| cut -d. -f1`
	1787	XOVMIN=`echo $XOV \| cut -d. -f2`
	1788	if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
	1789	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
	1790	else
	1791	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
	1792	fi
[3534]	1793	else
	1794	CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
	1795	fi
	1796	fi
[3522]	1797	fi
	1798	fi
	1799
[3546]	1800	# Avoids graphical tool to keep the FS mounted
	1801	sync
[3522]	1802	umount $MINDI_TMP/mpt \|\| Die "Unable to unmount $MINDI_TMP/mpt"
	1803
	1804	if [ "$target" = "ISO" ]; then
[3532]	1805	cp $part $MINDI_CACHE
[3533]	1806	if [ "$ARCH" = "ia64" ] \|\| [ "$BOOT_TYPE" = "UEFI" ]; then
[3692]	1807	# Mount again !
	1808	LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
	1809	mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
[3535]	1810	# We just need the EFI dir and the boot image for this case
[3536]	1811	mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]	1812	mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
	1813	# We need again the kernel+initrd at the root for UEFI boot at least
	1814	cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
	1815	# We need the boot image now and what mindi needs at restore time as well
	1816	cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]	1817	# Avoids graphical tool to keep the FS mounted
	1818	sync
[3535]	1819	umount $MINDI_TMP/mpt2
	1820	LogFile "----------- target dir content -----------"
	1821	LogFile "------------------------------------------"
	1822	ls -lR $MINDI_TMP/mpt >> $LOGFILE
	1823	LogFile "------------------------------------------"
[3532]	1824	MakeISO
[3522]	1825	fi
	1826	else
	1827	# USB
[1684]	1828	if [ "$ARCH" != "ia64" ] ; then
[2939]	1829	syslinux -v 2>&1 \| grep -q 4.02
	1830	if [ $? -eq 0 ]; then
	1831	# This buggy version of syslinux requires a call to --stupid and not -s
	1832	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
	1833	res=$?
	1834	else
	1835	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
	1836	res=$?
	1837	fi
	1838	if [ $res -ne 0 ] ; then
[2963]	1839	LogAll "----------- syslinux's errors --------------"
[1684]	1840	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
[2963]	1841	LogAll "------------------------------------------"
[3565]	1842	LogAll "ERROR: Failed to create USB image."
[1684]	1843	else
[2963]	1844	LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]	1845	fi
	1846	rm -f $MINDI_TMP/syslinux.log
	1847	else
[2963]	1848	LogAll "ERROR: No USB boot support for ia64"
[1684]	1849	MindiExit -1
	1850	fi
[3522]	1851	fi
[1684]	1852	}
	1853
	1854
[3522]	1855	OfferToMakeBootableUSB() {
	1856
	1857	local i files
	1858
	1859	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1860	echo -en "\nShall I make a bootable USB device ? (y/[n]) "
	1861	read i
	1862	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1863	if [ "$USBDEVICE" = "" ]; then
	1864	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
	1865	read dev
	1866	USBDEVICE=$dev
	1867	fi
	1868	echo "WARNING: This will erase all content on $USBDEVICE"
	1869	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
	1870	read i
	1871	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1872	else
	1873	if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
	1874	Die "No USBDEVICE environment variable declared, aborting"
	1875	fi
	1876	fi
	1877	USBPART="${USBDEVICE}1"
	1878
	1879	MakeBootableDevice USB
	1880	}
	1881
	1882
	1883	OfferToMakeBootableISO() {
	1884
	1885	local i files
	1886
	1887	if [ -z "$ISO_CMD" ]; then
	1888	LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
	1889	return
	1890	fi
	1891
	1892	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
	1893	echo -en "\nShall I make a bootable CD image? (y/[n]) "
	1894	read i
	1895	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
	1896	fi
	1897
	1898	MakeBootableDevice ISO
	1899	}
	1900
	1901
[747]	1902	MakeMessageFile() {
[2292]	1903
	1904	if [ -x "/bin/lsb_release" ]; then
	1905	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
[3173]	1906	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
	1907	DESC="Arch Linux"
	1908	if [ -r /var/log/pacman.log ]; then
	1909	# there are no releases but we can get the last system upgrade
	1910	# Output example: Arch Linux [2011-03-03 01:39]
	1911	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
[2754]	1912	fi
[3426]	1913	elif [ -x "/etc/os-release" ]; then
	1914	DESC=`grep PRETTY_NAME /etc/os-release \| cut -d= -f2`
	1915	elif [ -x "/usr/bin/pbdistrocheck" ]; then
	1916	# For pb >= 0.9.8
	1917	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4 \| sed 's/,/-/g'`
[2732]	1918	elif [ -r /etc/issue.net ]; then
[2731]	1919	DESC=`head -1 /etc/issue.net`
[2732]	1920	elif [ -r /etc/issue ]; then
[2731]	1921	DESC=`head -1 /etc/issue`
[747]	1922	else
[2731]	1923	DESC="Unknown desc"
[747]	1924	fi
[2292]	1925	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
[1885]	1926	if [ _"$MONDO_SHARE" != _"" ]; then
	1927	if [ "$CDRECOVERY" != "yes" ] ; then
[3270]	1928	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]	1929	echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]	1930	echo -en "$BOOT_MEDIA_MESSAGE"
[1885]	1931	elif [ ! "$MINDI_TMP" ] ; then
[3522]	1932	echo -en "FYI, this is _not_ a MondoRescue CD.\n"
	1933	if [ -e "$MINDI_LIB/memtest.img" ] ; then
[3653]	1934	echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
[3522]	1935	fi
[1885]	1936	else
	1937	echo -en "$BOOT_MEDIA_MESSAGE"
[747]	1938	fi
[1983]	1939	else
	1940	echo -en "\
[747]	1941	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
	1942	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]	1943	fi
[747]	1944	fi
[3173]	1945
	1946	# Also create the other help screens
	1947	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
	1948	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
	1949	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
[747]	1950	}
	1951
	1952
[1983]	1953	MakeBootConfFile() {
[1885]	1954	local options i ooo
[747]	1955	options=""
[1983]	1956	# Type of boot file (elilo or syslinux/isolinux)
	1957	type=$1
[3588]	1958	if [ "$type" = "elilo" ] \|\| [ "$type" = "grub2" ]; then
[1983]	1959	sep="="
[3398]	1960	sepdef="="
[1983]	1961	else
	1962	sep=" "
[3398]	1963	sepdef=" "
[1983]	1964	fi
[925]	1965
[1983]	1966	# Generic header for conf file
[3398]	1967	if [ "$type" = "elilo" ]; then
	1968	echo -en "prompt\n"
	1969	elif [ "$type" = "grub" ]; then
	1970	echo -en "pause Press a key when ready to restore\n"
[3518]	1971	elif [ "$type" = "grub2" ]; then
	1972	echo -en "set "
[3398]	1973	else
[3535]	1974	# syslinux family
[3173]	1975	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]	1976	fi
[1983]	1977
	1978	# Compute which default option to boot from
[3398]	1979	echo -en "default${sepdef}"
[747]	1980	if [ "$CDRECOVERY" = "yes" ] ; then
[3398]	1981	if [ "$type" = "grub" ]; then
[3430]	1982	# TODO: Which num ???
[3398]	1983	echo -en "0\n"
	1984	else
	1985	echo -en "RESTORE\n"
	1986	fi
[1983]	1987	# In case it's mondoarchive
[1885]	1988	elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]	1989	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]	1990	if [ "$type" = "grub" ]; then
	1991	echo -en "3\n"
	1992	else
	1993	echo -en "iso\n"
	1994	fi
[747]	1995	else
[3398]	1996	if [ "$type" = "grub" ]; then
	1997	echo -en "1\n"
	1998	else
	1999	echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
	2000	fi
[747]	2001	fi
	2002	else
[3398]	2003	if [ "$type" = "grub" ]; then
	2004	echo -en "0\n"
	2005	else
	2006	echo -en "expert\n"
	2007	fi
[747]	2008	fi
	2009
[1983]	2010	# Handle timeout
[3588]	2011	if [ "$type" = "grub2" ]; then
	2012	seppref="set "
	2013	else
	2014	seppref=""
[3518]	2015	fi
[3587]	2016	if [ "$CDRECOVERY" = "yes" ] ; then
[3588]	2017	echo -en "${seppref}timeout${sep}10000\n"
[3587]	2018	else
[3588]	2019	echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[747]	2020	fi
	2021	echo -en "\n"
[1983]	2022
[2124]	2023	# prepare which labels will be generated
[747]	2024	if [ "$CDRECOVERY" = "yes" ] ; then
[925]	2025	options="RESTORE expert"
[1885]	2026	else
	2027	if [ _"$MONDO_SHARE" != _"" ]; then
[2344]	2028	options="interactive expert compare iso nuke isonuke"
[747]	2029	else
	2030	options="expert"
[925]	2031	fi
[747]	2032	fi
[1983]	2033
	2034	# Generate rest of conf file
[747]	2035	for i in $options ; do
[925]	2036	ooo=$i
[3111]	2037	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]	2038	if [ "$type" = "elilo" ]; then
[3692]	2039	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]	2040	elif [ "$type" = "grub" ]; then
[3692]	2041	outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]	2042	elif [ "$type" = "grub2" ]; then
[3535]	2043	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2044	lorder="linuxefi"
	2045	iorder="initrdefi"
	2046	else
	2047	lorder="linux"
	2048	iorder="initrd"
	2049	fi
[3692]	2050	outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]	2051	else
[2073]	2052	ps="/"
[2629]	2053	if [ $KERNEL_IS_XEN = "no" ]; then
[3692]	2054	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
[2629]	2055	else
[3692]	2056	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
[2629]	2057	fi
[925]	2058	fi
[1885]	2059	echo -en "$outstr"
[747]	2060	done
[1983]	2061	if [ -e "$MINDI_LIB/memtest.img" ] ; then
	2062	if [ "$type" = "elilo" ]; then
	2063	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]	2064	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]	2065	elif [ "$type" = "grub" ]; then
[3415]	2066	echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]	2067	elif [ "$type" = "grub2" ]; then
	2068	echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]	2069	else
[2073]	2070	ps="/"
	2071	if [ "$type" = "syslinux" ]; then
	2072	ps=""
	2073	fi
	2074	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
	2075	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]	2076	fi
	2077	fi
[747]	2078	}
	2079
[2006]	2080	ParseModprobeForIncludes() {
	2081	local MODPROBE_CONF mpincfile includes include
	2082
	2083	MODPROBE_CONF=/etc/modprobe.conf
	2084	mpincfile=$1
	2085	touch $mpincfile
	2086	if [ -a $MODPROBE_CONF ]; then
[2431]	2087	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
[2006]	2088	if [ -n "$includes" ]; then
	2089	for include in $includes
	2090	do
	2091	if [ -a "$include" ]; then
	2092	echo $include >> $mpincfile
	2093	fi
	2094	done
	2095	fi
	2096	fi
	2097	}
	2098
[3585]	2099	PrepareBootDir() {
[2006]	2100
[3692]	2101	local detect
	2102	# Needs a bigdir variable setup before calling it
[3585]	2103
	2104	# copy (e)lilo/isolinux/grub/whatever stuff into it as well
	2105	# to get it on the media (in addition to the boot part
	2106	# and also to support UEFI boot mechanism
	2107	if [ "$boottype" != "" ]; then
	2108	detect="no"
	2109	else
	2110	detect="yes"
	2111	boottype=syslinux
	2112	fi
	2113	bootdir=$bigdir/$boottype
	2114	bootconf="$bootdir/$boottype.cfg"
	2115	mkdir -p $bootdir
	2116	FindLdlinux32Binary
	2117
	2118	if [ "$BOOT_TYPE" != "BIOS" ]; then
	2119	if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
	2120	LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
	2121	MindiExit -1
	2122	fi
	2123
	2124	mountefi=0
	2125	# EFI or UEFI
	2126	# TODO: names are hard-coded for now
	2127	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2128	# UEFI
	2129	efidir=$bigdir/EFI/BOOT
	2130	# Auto-detection if needed
	2131	if [ $detect = "yes" ]; then
	2132
	2133	# mount /boot/efi if needed
	2134	df -T \| grep /boot/efi \| grep -qE 'vfat'
	2135	if [ $? -ne 0 ]; then
	2136	mount /boot/efi
	2137	if [ $? -ne 0 ]; then
	2138	echo "ERROR: You have to mount your (U)EFI partition when using mindi"
	2139	MindiExit -1
	2140	fi
	2141	mountefi=1
	2142	fi
	2143
	2144	# On RHEL6 grub works
	2145	dname=`pbdistrocheck \| grep -E '^Name:' \| cut -d':' -f2`
	2146	dver=`pbdistrocheck \| grep -E '^Ver:' \| cut -d':' -f2`
[3602]	2147	if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
[3585]	2148	boottype=grub
[3652]	2149	elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
[3585]	2150	boottype=grub2
[3652]	2151	elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
[3609]	2152	boottype=grub2
[3652]	2153	elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
[3585]	2154	boottype=grub2
	2155	else
	2156	# Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
	2157	boottype=syslinux
	2158	fi
	2159	fi
	2160	if [ "$boottype" = "syslinux" ]; then
	2161	if [ ! "$bootbin" ]; then
	2162	FindSyslinux64EFI
	2163	bootbin=$SYSLINUX64EFI
	2164	fi
	2165	bootconf="$efidir/syslinux.cfg"
	2166	elif [ "$boottype" = "grub" ]; then
	2167	if [ ! "$bootbin" ]; then
	2168	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2169	fi
	2170	bootconf="$efidir/BOOTX64.conf"
	2171	elif [ "$boottype" = "grub2" ]; then
	2172	if [ ! "$bootbin" ]; then
	2173	bootbin=`find /boot/efi -iname "grub*.efi" \| head -1`
	2174	fi
	2175	bootconf="$efidir/grub.cfg"
	2176	fi
	2177
	2178	# Depending on the arch, the target boot file is different
	2179	if [ "$ARCH" = "x86_64" ] ; then
	2180	tgbin="BOOTX64.efi"
	2181	elif [ "$ARCH" = "armv8" ]; then
	2182	tgbin="BOOTAA64.efi"
	2183	else
	2184	# i?386
	2185	tgbin="BOOTIA32"
	2186	fi
	2187	else
	2188	# EFI
	2189	efidir=$bootdir
	2190	bootbin=`find /boot/efi -iname "elilo.efi" \| head -1`
	2191	tgbin=$bootbin
	2192	boottype=elilo
	2193	bootconf="$efidir/elilo.conf"
	2194	fi
	2195	LogAll "INFO: Found $boottype boot type"
	2196	mkdir -p $efidir
	2197	cp $bootbin $efidir/$tgbin
	2198
	2199	if [ $mountefi -eq 1 ]; then
	2200	umount /boot/efi 2>&1 > /dev/null
	2201	fi
	2202
	2203	if [ $boottype = "syslinux" ]; then
	2204	FindLdlinuxe64Binary
	2205	if [ -e "$LDLINUXE64" ]; then
	2206	LogFile "INFO: Copying $LDLINUXE64 to $efidir"
	2207	cp $LDLINUXE64 $efidir 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
	2208	cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
	2209	if [ -e $LDLINUXE64/../isolinux.c32 ]; then
	2210	cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
	2211	fi
	2212	fi
	2213	fi
	2214	# tgdir for syslinux
	2215	tgdir=$bigdir/EFI
	2216	else
	2217	# tgdir for syslinux
	2218	tgdir=$bootdir
	2219	fi
	2220	# In all cases prepare syslinux content for BIOS mode
	2221	# so that we can have multi boot mode media BIOS+UEFI
	2222	# Useful for syslinux 5.x
	2223	if [ -e "$LDLINUXC32" ]; then
	2224	LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
	2225	cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE \|\| Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
	2226	fi
	2227	if [ -e $LDLINUXC32/../isolinux.c32 ]; then
	2228	LogFile "INFO: Copying isolinux.c32 to $tgdir"
	2229	cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE \|\| Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
	2230	fi
	2231
	2232	MakeBootConfFile $boottype > $bootconf
	2233	LogFile "Boot Conf file $bootconf content is:"
	2234	LogFile "------------------------------------"
	2235	cat $bootconf >> $LOGFILE
	2236	LogFile "------------------------------------"
	2237	if [ "$BOOT_TYPE" = "UEFI" ]; then
	2238	# Also generate the syslinux conf
	2239	MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
	2240	LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
	2241	LogFile "---------------------------------------------------"
	2242	cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
	2243	LogFile "---------------------------------------------------"
	2244	fi
	2245
	2246	}
	2247
[3692]	2248	PrepareBigDirTar() {
[3585]	2249	echo -en "INFO: Tarring and zipping the data content..."
	2250	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $MINDI_CACHE/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
	2251	LogFile "Size of the data content"
	2252	LogFile "------------------------"
	2253	du -sk $MINDI_CACHE/*gz >> $LOGFILE
	2254	LogFile "------------------------"
	2255	echo -e "$DONE"
	2256
	2257	}
	2258
[3692]	2259	CleanBigDir() {
	2260	[ "$bigdir" != "/" ] && echo $bigdir \| grep -vq $MINDI_TMP && rm -rf $bigdir
	2261	}
[747]	2262
[3692]	2263	PrepareBigDir() {
	2264	local needlist diskdir res i j k lines lfiles includefile
	2265
[3407]	2266	rm -f $MINDI_CACHE/mindi.iso
[940]	2267	needlist=$MINDI_TMP/what-we-need.txt
[747]	2268	mkdir -p $bigdir/usr/bin
[1983]	2269	mkdir -p $bigdir/usr/sbin
[2006]	2270	includefile=$MINDI_TMP/$$.includefile.txt
[747]	2271
[3149]	2272	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
[2409]	2273	if [ -e "$DEPLIST_FILE" ]; then
[3149]	2274	lfiles="$DEPLIST_FILE $lfiles"
[2409]	2275	fi
[1885]	2276	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
[2006]	2277	ParseModprobeForIncludes $includefile
[2019]	2278	lines=$(($lines+`cat $includefile \| wc -l`))
[2006]	2279	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
[747]	2280	res=$?
[2006]	2281	rm -f $includefile
[3231]	2282	ListKernelModulePaths >> $needlist
[747]	2283	if [ "$res" -ne "0" ] ; then
[1902]	2284	Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]	2285	fi
	2286	mkdir -p $bigdir/tmp
[1885]	2287	if [ _"$MONDO_SHARE" != _"" ]; then
[3430]	2288	# TODO: no reason to have the cfg file stored twice
[3278]	2289	MakeMondoConfigFile $MINDI_TMP/$MRCFG
	2290	cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]	2291	fi
[3281]	2292
	2293	# Needs to be done after the MRCFG creation
	2294	FindAndAddUserKeyboardMappingFile
	2295
[3166]	2296	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]	2297	DropOptimizedLibraries $needlist $bigdir
[3522]	2298	echo -en "INFO: Assembling dependency files"
[747]	2299
[3522]	2300	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
[3585]	2301	rm -f $needlist
[3522]	2302	echo -e "$DONE"
[3149]	2303
[925]	2304	# also copy io.sys and msdos.sys, if we can find them
[747]	2305	for i in `mount \| cut -d' ' -f3` ; do
[925]	2306	for j in io.sys msdos.sys ; do
[963]	2307	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]	2308	done
[747]	2309	done
	2310
[925]	2311	# master boot record, too
[940]	2312	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]	2313	if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]	2314	LogAll "INFO: Backing up $i's MBR"
[925]	2315	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
	2316	sleep 1
	2317	sync
	2318	j=$i
	2319	[ -h "$j" ] && j=`readlink -f $j`
[3149]	2320	LogAll "INFO: Creating /dev/boot_device ($j)"
[925]	2321	mkdir -p $bigdir/dev
[2089]	2322	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
[747]	2323	fi
	2324
[1983]	2325	# Get terminfo content
	2326	ti="usr/share/terminfo/l"
	2327	if [ -d /$ti ]; then
[3522]	2328	mkdir -p $bigdir/$ti
	2329	cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
[747]	2330	fi
[1764]	2331	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]	2332	cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]	2333	[ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]	2334	cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]	2335	fi
[2290]	2336	if [ -d "/lib/dev-state" ]; then
[3542]	2337	cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]	2338	fi
[940]	2339	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	2340	CheckMountlist $MINDI_TMP/mountlist.txt
[1902]	2341	mkdir -p $bigdir/tmp
[2092]	2342	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]	2343	if [ _"$MONDO_SHARE" != _"" ]; then
[1902]	2344	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]	2345	fi
[2032]	2346	if [ $LVM != "false" ]; then
	2347	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]	2348	if [ $? -ne 0 ]; then
[2032]	2349	LVM="false"
	2350	rm -f $bigdir/tmp/i-want-my-lvm
[2552]	2351	else
[2963]	2352	LogFile "Your i-want-my-lvm file content is:"
	2353	LogFile "-----------------------------------"
[2552]	2354	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]	2355	LogFile "-----------------------------------"
[2032]	2356	fi
	2357	fi
[3522]	2358	LogFile "INFO: Your mountlist.txt file content is:"
[2963]	2359	LogFile "-----------------------------------"
[1902]	2360	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]	2361	LogFile "-----------------------------------"
[2432]	2362
[2092]	2363	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
	2364	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]	2365	if [ _"$MONDO_SHARE" != _"" ]; then
	2366	for q in filelist.full.gz biggielist.txt ; do
	2367	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
	2368	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
	2369	done
	2370	fi
	2371
[3585]	2372	PrepareBootDir
[3692]	2373
[747]	2374	}
	2375
	2376
	2377	Prompt() {
	2378	echo -en "$1"
	2379	read line
	2380	}
	2381
	2382
	2383	ReadLine() {
	2384	local i incoming
	2385	read incoming
	2386	i=0
	2387	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]	2388	i=$(($i+1))
	2389	read incoming
[747]	2390	done
	2391	echo "$incoming"
	2392	}
	2393
	2394
	2395	SizeOfPartition() {
	2396	local devpath drive res stub
	2397	device=$1
[2917]	2398	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
	2399	Die "Cannot find $device's size - is your /etc/fstab sane?"
	2400	fi
[747]	2401	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
[925]	2402	res=`SizeOfRaidPartition $device`
	2403	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
	2404	echo "$res"
	2405	return 0
[747]	2406	fi
[925]	2407	# patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]	2408	res=`$FDISK -s $device 2>> $LOGFILE`
[925]	2409	# end patch
[2448]	2410	# take only the first in case of multiple mount (cifs, nfs, ...)
	2411	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
[747]	2412	[ "$res" = "" ] && res="-1"
	2413	echo $res
	2414	return 0
	2415	}
	2416
	2417
	2418	SizeOfRaidPartition() {
	2419	local real_dev smallest_size silly tmp
	2420
	2421	silly=999999999
	2422	smallest_size=$silly
	2423
	2424	for real_dev in `GetRaidDevMembers $1` ; do
[925]	2425	tmp=`SizeOfPartition $real_dev`
	2426	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]	2427	done
	2428
	2429	if [ "$smallest_size" = "$silly" ] ; then
[925]	2430	echo "-1"
	2431	return 1
[747]	2432	else
[925]	2433	echo "$smallest_size"
	2434	return 0
[747]	2435	fi
	2436	}
	2437
	2438
	2439	StripExecutable()
	2440	{
	2441	local tmpfile
[925]	2442
[940]	2443	tmpfile=$MINDI_TMP/stripped.$$.dat
[747]	2444	[ -d "$1" ] \|\| [ -h "$1" ] && return
[963]	2445	cp -f $1 $tmpfile 2>> $LOGFILE
[747]	2446	strip $tmpfile 2> /dev/null
[3528]	2447	if [ $? -eq 0 ] ; then
[963]	2448	cp -f $tmpfile $1 2>> $LOGFILE
[2963]	2449	LogFile "INFO: Stripped binary $2"
[747]	2450	fi
	2451	rm -f $tmpfile
	2452	}
	2453
[2292]	2454	KernelVer() {
	2455	local fkern_ver fname
[747]	2456
[2292]	2457	fname=$1
	2458	file $fname \| grep -q gzip
[3528]	2459	if [ $? -eq 0 ] ; then
[2292]	2460	# Used by ia64
[3528]	2461	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2462	else
[3528]	2463	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]	2464	fi
	2465	echo "$fkern_ver"
	2466	}
	2467
	2468
[2880]	2469	# WARNING: This function should just echo the final result !!!
	2470	#
[747]	2471	TryToFindKernelPath() {
[2880]	2472	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]	2473
[2292]	2474	we_want_version=$KERVERRUN
[747]	2475	possible_kernels=""
	2476	duff_kernels=""
[2880]	2477	output=""
[3368]	2478
[747]	2479	if [ "$ARCH" = "ia64" ] ; then
	2480	root="/boot/efi/efi"
	2481	else
	2482	root="/"
	2483	fi
[2681]	2484	# See if we're booted from a Xen kernel
[2889]	2485	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
	2486	if [ -f /proc/xen/capabilities ]; then
[2681]	2487	# It's a Xen kernel
	2488	KERNEL_IS_XEN="yes"
[2963]	2489	LogFile "INFO: It's a Xen kernel..."
[2681]	2490	fi
	2491
[3122]	2492	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
[925]	2493	[ ! -e "$fname" ] && continue
[747]	2494	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]	2495	fkern_ver=`KernelVer $fname`
[747]	2496	[ "$fkern_ver" = "" ] && continue
	2497	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
[925]	2498	[ -f "$fname" ] \|\| continue
	2499	[ -h "$fname" ] && continue
	2500	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
	2501	file $fname \| grep -q gzip
[3528]	2502	if [ $? -eq 0 ] ; then
[925]	2503	# Used by ia64
	2504	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2505	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]	2506	duff_kernels="$fname $duff_kernels"
	2507	else
[747]	2508	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2509	possible_kernels="$fname $possible_kernels"
[925]	2510	fi
[747]	2511	else
[925]	2512	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
[2880]	2513	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]	2514	duff_kernels="$fname $duff_kernels"
	2515	else
[747]	2516	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
	2517	possible_kernels="$fname $possible_kernels"
[925]	2518	fi
[747]	2519	fi
	2520	done
	2521	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
[3535]	2522	possible_kernels=`find /boot/vmlinuz-[2-9].* \| tail -n1`
[747]	2523	fi
	2524	if [ ! "$possible_kernels" ] ; then
[3149]	2525	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]	2526	possible_kernels="$duff_kernels"
	2527	if [ ! "$possible_kernels" ] ; then
[3149]	2528	LogAll "INFO: Sorry, no duff kernels either"
[747]	2529	else
[3149]	2530	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
	2531	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]	2532	fi
	2533	fi
[2681]	2534	if [ $KERNEL_IS_XEN = "yes" ]; then
	2535	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
	2536	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
	2537	fi
[2829]	2538	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
	2539	noof_kernels=`CountItemsIn "$possible_kernels"`
[747]	2540	if [ "$noof_kernels" -eq "0" ] ; then
[3149]	2541	LogAll "Could not find your kernel."
[925]	2542	if [ -e "/boot/vmlinuz" ] ; then
[3149]	2543	LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]	2544	output=/boot/vmlinuz
[747]	2545	else
[925]	2546	output=""
	2547	fi
[747]	2548	elif [ "$noof_kernels" -eq "1" ] ; then
[2880]	2549	kp=`echo "$possible_kernels" \| sed s/' '//`
[2963]	2550	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]	2551	output="$kp"
[747]	2552	else
	2553	for i in $possible_kernels ; do
[2880]	2554	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[3149]	2555	LogAll "INFO: OK, I used my initiative and found that "
	2556	LogAll "INFO: $i is probably your kernel. "
[925]	2557	output="$i"
[2858]	2558	break
[925]	2559	fi
[747]	2560	done
[2858]	2561	if [ ! -n "$output" ]; then
[2880]	2562	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]	2563	output=/boot/vmlinuz
[2963]	2564	LogFile "INFO: Schlomo, this one's for you."
[2681]	2565	else
[3651]	2566	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
[2963]	2567	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
[3651]	2568	LogFile "INFO: $possible_kernels"
	2569	output=""
[2681]	2570	fi
	2571	fi
	2572	fi
	2573	if [ $KERNEL_IS_XEN = "yes" ]; then
	2574	if [ "$noof_xenkernels" -eq "0" ]; then
	2575	xenkernelpath=""
	2576	elif [ "$noof_xenkernels" -eq "1" ]; then
	2577	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
[2963]	2578	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]	2579	else
[2681]	2580	for i in $possible_xenkernels ; do
[2880]	2581	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
[2963]	2582	LogFile "INFO: OK, I used my initiative and found that "
	2583	LogFile "INFO: $i is probably your Xen kernel. "
[2681]	2584	xenkernelpath="$i"
[2858]	2585	break
[2681]	2586	fi
	2587	done
[2858]	2588	if [ ! -n "$xenkernelpath" ]; then
[2681]	2589	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
	2590	if [ ! -n "$new_possible_xenkernels" ]; then
	2591	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2592	LogFile "INFO: Using $xenkernelpath"
[2681]	2593	else
[2963]	2594	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
	2595	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
	2596	LogFile "INFO: $possible_xenkernels"
[2880]	2597	output=""
[2681]	2598	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
[2963]	2599	LogFile "INFO: Using $xenkernelpath"
[2681]	2600	fi
	2601	fi
[925]	2602	fi
[2681]	2603	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
	2604	Die "Cannot find Xen kernel $xenkernelpath, aborting"
	2605	fi
[747]	2606	fi
[3357]	2607	#LogAll "TryToFindKernelPath found $output"
[2681]	2608	echo "$output"
[747]	2609	}
	2610
[3660]	2611	CopyFromConf() {
[747]	2612
[3660]	2613	conf=$1
[3692]	2614	mp=$2
[3660]	2615	echo -en "INFO: Gathering dependencies of $conf.conf..."
[3692]	2616	LogFile "INFO: Gathering dependencies of $conf.conf..."
[3660]	2617	lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf \| sort -u`
	2618	noof_lines=`echo $lis2 \| wc -w`
	2619	progress=0
	2620	# Get only the files which exist in that list
	2621	# and potentially their symlink structure
[3661]	2622	# put apart directories for later handling
[3660]	2623	for f in $lis2; do
	2624	if [ -d $f ]; then
[3661]	2625	for g in `find $f`; do
[3660]	2626	echo $g >> $MINDI_TMP/$conf.lis
	2627	LocateDeps $g >> $MINDI_TMP/$conf.lis2
	2628	done
	2629	lis3="$lis3 $f"
[3661]	2630	else
[3660]	2631	if [ -r $f ]; then
	2632	echo $f >> $MINDI_TMP/$conf.lis
	2633	LocateDeps $f >> $MINDI_TMP/$conf.lis2
	2634	fi
	2635	fi
	2636	progress=$(($progress+1))
	2637	LogProgress $progress $noof_lines
	2638	done
	2639	echo -e "$DONE"
[3692]	2640	LogAll "INFO: Processing all dependencies links for $conf.conf..."
[3662]	2641	# And their deps except dirs
	2642	lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
	2643	rm -f $MINDI_TMP/$conf.lis2
[3660]	2644	finallist=""
[3662]	2645	# Remove directories from the list, as cp will create them anyway
[3660]	2646	# and it may hurt if /lib is in it as on Debian/Ubuntu
	2647	# recent bash says that -d is true for a link to a dir !
[3662]	2648	for f in $lines; do
[3660]	2649	if [ -e "$f" -a ! -d "$f" ] \|\| [ -h "$f" ]; then
	2650	# Do not overwrite files already in destination (avoid using option -n of cp not portable)
[3692]	2651	if [ ! -e "$mp/$f" ]; then
[3660]	2652	finallist="$finallist $f"
	2653	fi
	2654	fi
	2655	done
	2656	# But adds the directory useful in $lis3
[3692]	2657	fnllist=`echo $finallist $lis3 \| tr ' ' '\n' \| sort -u \| tr '\n' ' '`
	2658	LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
	2659	cp -a --parents $fnllist -t $mp/ 2> $templog \|\| LogAll "WARNING: Problem in $conf analysis" $templog
[3662]	2660	rm -f $MINDI_TMP/$conf.lis
[3660]	2661	}
	2662
[3692]	2663	PrepareTargetDir() {
	2664	local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]	2665
[3692]	2666	tgz_dir_fname=$MINDI_LIB/rootfs
	2667	rdz_fname=$MINDI_TMP/initrd.img
	2668	kernelsize=`du -sk $kernelpath \| cut -f1`
[3403]	2669	res=0
	2670	templog=$MINDI_TMP/$$.log
	2671	> $templog
	2672
[3692]	2673	mkdir -p $targetdir
[3248]	2674	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
	2675	for d in bin sbin lib lib64; do
	2676	if [ -h "/$d" ]; then
	2677	thelink=`readlink /$d`
[3692]	2678	mkdir -p $targetdir/$thelink \|\| LogAll "ERROR: Unable to create $thelink in $targetdir"
	2679	mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
	2680	if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
	2681	rmdir $targetdir/$d
[3248]	2682	fi
[3692]	2683	if [ ! -h $targetdir/$d ]; then
	2684	rm -f $targetdir/$d 2> /dev/null
	2685	(cd $targetdir ; ln -s $thelink $d) \|\| LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
[3248]	2686	fi
	2687	fi
	2688	done
[3357]	2689
[3692]	2690	LogFile "INFO: what is now in $targetdir"
	2691	ls -al $targetdir >> $LOGFILE
[3172]	2692
[2963]	2693	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3692]	2694	# copy from rootfs into targetdir
	2695	LogAll "INFO: Copying Mindi files onto $targetdir"
[3661]	2696	for f in $tgz_dir_fname/*; do
[2963]	2697	if [ ! -r $f ]; then
	2698	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
	2699	else
[3692]	2700	cp -af $f $targetdir 2>&1 >> $LOGFILE
[2963]	2701	fi
	2702	done
[3692]	2703	(cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
	2704	# kernel expects linuxrc in ext2 filesystem
	2705	(cd $targetdir ; ln -sf usr/sbin/init linuxrc)
	2706	# kernel expects init in cpio filesystem
	2707	(cd $targetdir ; ln -sf usr/sbin/init init)
[1914]	2708
[3692]	2709	(cd $targetdir/dev ; tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]	2710
	2711	for w in insmod.static insmod.static.old ; do
[925]	2712	s=`which $w 2> /dev/null`
	2713	if [ -e "$s" ] ; then
[3692]	2714	tar cf - -C / $s 2> /dev/null \| (cd $targetdir ; tar xf -)
[925]	2715	fi
[747]	2716	done
	2717
	2718	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]	2719
[2438]	2720	# Copy of files mandatory for ssh to automate mount if sshfs is used
[3692]	2721	mkdir -p $targetdir/.ssh $targetdir/tmp
	2722	cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
	2723	cat > $targetdir/tmp/myssh << EOF
	2724	ssh -o StrictHostKeyChecking=no \$*
[2438]	2725	EOF
[3692]	2726	chmod 755 $targetdir/tmp/myssh
[2438]	2727
[2039]	2728	# Copy of files mandatory for ld.so
[3692]	2729	cp -a /etc/ld.so.c* $targetdir/etc
[2039]	2730
[2951]	2731	# Handle the case where busybox and mount are dynamically linked
[3231]	2732	file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| grep -q "dynamically"
[2951]	2733	if [ $? -eq 0 ]; then
	2734	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3692]	2735	rm -f $targetdir/bin/mount
[2951]	2736	fi
	2737
[3522]	2738	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
[3692]	2739	CopyFromConf minimal $targetdir
[3357]	2740
	2741	# For older distributions expecting /sbin/init provides it
[3692]	2742	if [ ! -e "$targetdir/sbin/init" ]; then
	2743	(cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
[3357]	2744	fi
	2745
[3000]	2746	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3692]	2747	(cd $targetdir ; ln -sf /bin/bash bin/sh)
[3405]	2748	LogFile "INFO: Using bash as default shell"
[2951]	2749
	2750	# Avoids an issue on some distro (RHEL5)
[3692]	2751	rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
[2164]	2752
[3661]	2753	# Management of DRBD
	2754	which drbdadm &> /dev/null
	2755	if [ $? -eq 0 ]; then
	2756	# Do we find DRBD devices setup
	2757	drbdadm sh-dev all \| grep -E '^/dev' &> /dev/null
	2758	if [ $? -eq 0 ]; then
[3692]	2759	CopyFromConf drbd $targetdir
[3661]	2760	fi
	2761	# DRBD requires net activation
	2762	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
	2763	fi
	2764
[1724]	2765	# Management of udev (which includes modprobe in rules)
[1759]	2766	ps auxww \| grep -v grep \| grep -qw udevd
[1716]	2767	if [ $? -eq 0 ]; then
[3692]	2768	echo "udev device manager found" > $targetdir/tmp/USE-UDEV
[3405]	2769	LogFile "INFO: udev device manager found"
[3692]	2770	tar cf - -C / /etc/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]	2771	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3692]	2772	rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]	2773	# Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]	2774	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3692]	2775	tar cf - -C / /lib64/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]	2776	fi
[2895]	2777	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
[3692]	2778	tar cf - -C / /lib32/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]	2779	fi
	2780	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
[3692]	2781	tar cf - -C / /lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]	2782	fi
[3261]	2783	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
[3692]	2784	tar cf - -C / /usr/lib/udev 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]	2785	fi
[3489]	2786	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ] \|\| [ -x /lib/systemd/systemd-udevd ]; then
[3692]	2787	CopyFromConf udev $targetdir
[1720]	2788	else
[2965]	2789	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]	2790	LogAll " mindi will use static devices which may cause problems"
[3692]	2791	rm -f $targetdir/tmp/USE-UDEV
[1720]	2792	fi
[1716]	2793	fi
[1786]	2794
[2882]	2795	# Management of potential HW info (ProLiant only at the moment)
[1880]	2796	rm -rf $MINDI_CACHE/bkphw
	2797	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
	2798	if [ -d $MINDI_CACHE/bkphw ]; then
[3565]	2799	LogAll "INFO: Hardware Information found and saved ..."
[3692]	2800	cp -rp $MINDI_CACHE/bkphw $targetdir
[1880]	2801	if [ -f $MINDI_CACHE/tools.files ]; then
	2802	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
[1863]	2803	LocateDeps $lis > $MINDI_TMP/tools.lis
[3692]	2804	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]	2805	fi
[1880]	2806	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3692]	2807	mv -f $MINDI_CACHE/mindi-rsthw $targetdir
	2808	chmod 755 $targetdir/mindi-rsthw
[1761]	2809	fi
[1880]	2810	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]	2811	fi
	2812
[2183]	2813	# Management of perl scripts delivered needed at restore time
[3522]	2814	LogAll "INFO: Analyzing perl modules dependencies..."
[3565]	2815	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]bin/mr- 2> $templog > $MINDI_TMP/perl.lis \|\| LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]	2816	LogFile "DBG4: Perl Modules found:"
	2817	LogFile "-------------------------"
[3403]	2818	cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]	2819	LogFile "-------------------------"
[3692]	2820	tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]	2821
[1885]	2822	for w in cdrom groovy-stuff ; do
[747]	2823	mkdir -p mnt/$w
	2824	done
	2825
[3692]	2826	tar cf - -C / /dev/fd0[1,2][4,7,8] 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]	2827
[1885]	2828	needed_modules=""
[1993]	2829	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
[1885]	2830
[3270]	2831	if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]	2832	# For PXE boot
	2833	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
	2834	fi
[1727]	2835	for i in $DENY_MODS; do
[2963]	2836	LogFile "INFO: Removing $i from the list of modules to load"
[1727]	2837	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
	2838	done
	2839
[3253]	2840	if [ "${kernelname}" != "" ]; then
	2841	needed_modules_path=lib/modules/${kernelname}
[3257]	2842	mkgmopt="-k ${kernelname}"
[3253]	2843	else
	2844	needed_modules_path=lib/modules/$KERVERRUN
	2845	mkgmopt="-k $KERVERRUN"
	2846	fi
[1914]	2847
[3565]	2848	[ -e "/$needed_modules_path" ] \|\| LogAll "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then mindi won't probably work."
[3522]	2849	LogAll "INFO: Analyzing kernel modules dependencies..."
[3253]	2850	needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
	2851
[3257]	2852	LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3692]	2853	cp --parents -aL $needed_modules $targetdir/ 2> $templog \|\| LogAll "ERROR: Unable to copy modules to $targetdir" $templog
[3253]	2854
	2855	# Uncompress modules if not using udev and native modprobe
[3692]	2856	if [ ! -f $targetdir/tmp/USE-UDEV ]; then
[3253]	2857	for i in $needed_modules; do
	2858	if [ "`echo "$i" \| grep -E ".gz$"`" ]; then
[3692]	2859	gunzip -f $targetdir/$i
[1815]	2860	fi
[3253]	2861	if [ "`echo "$i" \| grep -E ".bz$"`" ]; then
[3692]	2862	bunzip2 -f $targetdir/$i
[3253]	2863	fi
	2864	if [ "`echo "$i" \| grep -E ".xz$"`" ]; then
[3692]	2865	unxz -f $targetdir/$i
[3253]	2866	fi
	2867	LogFile "INFO: Uncompressing $i"
	2868	done
	2869	fi
[1815]	2870
[2964]	2871	# Also copy modules.* in case of udev so that normal modprobe works
[3692]	2872	tar cf - -C / /$needed_modules_path/modules.* 2> $templog \| (cd "$targetdir" ; tar xf -) \|\| LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
[1815]	2873
[2680]	2874	# Copy FW in case some drivers needs it
[3163]	2875	for d in "/lib" "/usr/lib"; do
[3201]	2876	if [ -d "$d/firmware" -a ! -h $d ]; then
[3692]	2877	cp -a "$d/firmware" "$targetdir$d"
[3163]	2878	fi
	2879	done
[2680]	2880
[3163]	2881	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
	2882	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]	2883	if [ -d "$d/multipath" -a ! -h $d ]; then
[3692]	2884	cp -a "$d/multipath" "$targetdir$d"
[3163]	2885	fi
	2886	done
	2887
[3326]	2888	# Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3692]	2889	(cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]	2890
[2913]	2891	# Copy an additional ProLiant tool for OBDR support
	2892	if [ -f $MINDI_TMP/OBDR ]; then
[3117]	2893	found=0
[2913]	2894	if [ -x /usr/bin/hpsa_obdr_mode ]; then
[3692]	2895	mkdir -p $targetdir/usr/bin
	2896	cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
[3565]	2897	LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]	2898	found=1
	2899	fi
	2900	if [ -x /usr/bin/sg_wr_mode ]; then
[3692]	2901	mkdir -p $targetdir/usr/bin
[3135]	2902	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]	2903	LocateDeps $lis > $MINDI_TMP/obdr.lis
[3692]	2904	tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2> $templog \| (cd $targetdir ; tar xf -) \|\| LogAll "ERROR: Problem in obdr.lis analysis" $templog
[3565]	2905	LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]	2906	found=1
	2907	fi
	2908	if [ $found -eq 0 ]; then
	2909	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]	2910	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
	2911	fi
	2912	fi
	2913
[3499]	2914	if [ ! -e "/sbin/devfsd" ]; then
[2963]	2915	LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]	2916	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
[3692]	2917	rm -f $targetdir/sbin/devfsd
[747]	2918	fi
[3692]	2919	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
[1885]	2920	if [ _"$MONDO_SHARE" != _"" ]; then
[3692]	2921	MakeMondoConfigFile $targetdir/tmp/$MRCFG
	2922	cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy $MRCFG to ramdisk"
	2923	cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
	2924	echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
	2925	echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
[747]	2926	fi
[3310]	2927
	2928	# Create module list to load at restore time
[3692]	2929	rm -f $targetdir/tmp/modules
[3310]	2930	for m in $CDROM_MODS; do
[3692]	2931	echo $m >> $targetdir/tmp/modules
[3310]	2932	done
	2933
[3692]	2934	mkdir -p $targetdir/proc
[2963]	2935	LogFile "---------------------------"
[3692]	2936	LogFile "Content of initial targetdir:"
	2937	LogFile "---------------------------- "
	2938	(cd "$targetdir" ; ls -Rla ) >> $LOGFILE
[3372]	2939	LogFile "---------------------------"
[3692]	2940	}
[2438]	2941
[3692]	2942	CleanTargetDir() {
	2943	[ "$targetdir" != "/" ] && rm -rf $targetdir
	2944	}
	2945
	2946	PatchBootFiles() {
	2947
	2948	# Patch the real value of RAMDISK_SIZE now we have it
	2949	if [ -d "$bigdir/syslinux" ]; then
	2950	find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
	2951	fi
	2952	if [ -d "$bigdir/EFI" ]; then
	2953	find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
	2954	fi
	2955	for i in `cat $MINDI_TMP/bootf.lis`; do
	2956	perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
	2957	done
	2958	rm -f $MINDI_TMP/bootf.lis
	2959
	2960	}
	2961
	2962	MakeBootInitFile() {
	2963
	2964	local mountpoint tempfile res
	2965	tempfile=$MINDI_TMP/temp.rd
	2966	res=0
	2967
	2968	LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
	2969	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
	2970
	2971	LogAll "INFO: Creating ext2 filesystem on $tempfile"
	2972	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
	2973	res=$(($res+$?))
	2974
	2975	mountpoint=$MINDI_TMP/mountpoint.$$
	2976	mkdir -p $mountpoint
	2977	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
	2978	[ "$targetdir" = "/" ] && echo $targetdir \| grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
	2979	mv $targetdir/* $targetdir/.??* $mountpoint \|\| Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
	2980	res=$(($res+$?))
	2981	rmdir $targetdir
	2982
	2983	LogFile "INFO: initrd image is $rdz_fname"
[1230]	2984	# Determine what filesystem to use for initrd image
[2963]	2985	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
[1230]	2986	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
	2987	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
[3008]	2988	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
[1230]	2989	# say what will be used
[2963]	2990	LogFile "INFO: Creating an $gvFileSystem initrd image..."
[1230]	2991	# unmount loop filesystem and create image file using the standard approach
[3546]	2992	sync
[1230]	2993	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[3522]	2994	dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
[3692]	2995	res=$(($res+$?))
[3008]	2996	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
	2997	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	2998	else
	2999	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
	3000	fi
[2564]	3001	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
[1799]	3002	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
[3692]	3003	res=$(($res+$?))
[1764]	3004	rm -f ${rdz_fname}.tmp
[2390]	3005	elif [ "$gvFileSystem" = "initramfs" ]; then
[1230]	3006	# say what will be used
[2963]	3007	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
[1230]	3008	# make sure that cpio is there
	3009	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
	3010	# create cpio image file and unmount loop filesystem
[3524]	3011	(cd "$mountpoint" ; find . -print \| cpio -o -H newc 2> /dev/null \| gzip -9 > $rdz_fname)
[3692]	3012	res=$(($res+$?))
[3546]	3013	sync
[1230]	3014	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
[2390]	3015	else
[1230]	3016	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
[2390]	3017	fi
	3018
[3692]	3019	# log that we are done
[747]	3020	if [ "$res" -eq "0" ] ; then
[3525]	3021	LogAll "INFO: MakeBootInitFile finished without error."
[747]	3022	else
[3525]	3023	LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
[747]	3024	fi
[3692]	3025
[747]	3026	return 0
	3027	}
	3028
	3029
	3030	##############################################################################
[1021]	3031	#----------------------------------- Main -----------------------------------#
[747]	3032	##############################################################################
	3033
[1885]	3034	# Now we can create what we need
	3035	mkdir -p $MINDI_TMP
[3692]	3036	export bigdir=$MINDI_TMP/bigdir.$$
	3037	export targetdir=$MINDI_TMP/targetdir.$$
[747]	3038
[2995]	3039	# --nolog needs to be first, and is used in analyze-my-lvm
	3040	if [ "$1" = "--nolog" ] ; then
	3041	shift
	3042	LOGFILE=/dev/stderr
	3043	else
	3044	> $LOGFILE
	3045	fi
[1885]	3046	if [ "$1" = "--printvar" ] ; then
	3047	shift
	3048	if [ _"$1" != _"" ] ; then
	3049	set \| grep -Ew "^$1" \| cut -d= -f2
	3050	fi
[2183]	3051	exit 0
[1885]	3052	fi
	3053
[2963]	3054	LogFile "mindi v$MINDI_VERSION"
[3513]	3055	LogFile "-----------------------------"
	3056	LogFile "Start date : `date`"
	3057	LogFile "-----------------------------"
[2963]	3058	LogFile "$ARCH architecture detected"
	3059	LogFile "mindi called with the following arguments:"
[2978]	3060	echo "$@">> $LOGFILE
[2963]	3061	LogFile "-----------------------------"
[3650]	3062	pbdistrocheck --version \| grep Version >> $LOGFILE
[3513]	3063	LogFile "pbdistrocheck results:"
	3064	pbdistrocheck >> $LOGFILE
	3065	LogFile "-----------------------------"
[3650]	3066	LogFile "MondoRescue perl module:"
	3067	mr-getparam --version \| grep Version >> $LOGFILE
	3068	LogFile "-----------------------------"
[747]	3069
[1010]	3070	# Log some capital variables
	3071	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
[3149]	3072	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
[2963]	3073	LogFile "MONDO_SHARE = $MONDO_SHARE"
	3074	LogFile "MINDI_LIB = $MINDI_LIB"
	3075	LogFile "MINDI_SBIN = $MINDI_SBIN"
	3076	LogFile "MINDI_CONF = $MINDI_CONF"
[3388]	3077	# Purge from potential old run
	3078	if [ _"$MINDI_CACHE" = _"" ]; then
	3079	Die "MINDI_CACHE undefined"
	3080	else
	3081	LogFile "MINDI_CACHE = $MINDI_CACHE"
	3082	fi
	3083
[1885]	3084	if [ -f $MINDI_CONFIG ]; then
[2963]	3085	LogFile "-----------------------------"
	3086	LogFile " Mindi configuration file "
	3087	LogFile "-----------------------------"
[1885]	3088	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
[2963]	3089	LogFile "-----------------------------"
[1885]	3090	fi
[2995]	3091	LogFile "In Mindi"
	3092	LogFile "--------"
	3093	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
	3094	LogFile "--------"
[1010]	3095
[747]	3096	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
[1010]	3097
	3098	# Sanity checks
	3099	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
	3100	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
	3101	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
	3102	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
	3103	if which awk &> /dev/null ; then
	3104	if ! which gawk &> /dev/null ; then
[3565]	3105	LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
[1010]	3106	fi
	3107	fi
	3108	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
[2222]	3109	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
[1010]	3110
[3005]	3111	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
[1010]	3112
	3113	# Update the PATH variable if incomplete
	3114	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
	3115	PATH=$PATH:/sbin:/usr/sbin
	3116	export PATH
[2963]	3117	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
	3118	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
[3255]	3119	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
[1010]	3120	fi
	3121
[1737]	3122	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
[3368]	3123	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
[1010]	3124	fi
	3125
[3149]	3126	### TODO
[747]	3127	### Fix as it's not mandatory on ia64
	3128	if [ "$ARCH" = "ia64" ] ; then
[1010]	3129	if which elilo &> /dev/null ; then
	3130	LILO_EXE=elilo
	3131	else
[2024]	3132	LILO_EXE=`which false 2> /dev/null`
[1010]	3133	fi
[747]	3134	else
	3135	FindIsolinuxBinary
	3136	fi
	3137	trap "Aborted" SIGTERM
	3138	DONE="\r\t\t\t\t\t\t\t\tDone. "
	3139	kernelpath=""
[1010]	3140	MONDO_ROOT=/var/cache/mondo
[747]	3141	mkdir -p $MONDO_ROOT
	3142
	3143	if [ -d "/proc/lvm" ]; then
	3144	# LVM v1
	3145	LVMCMD=""
	3146	LVM="v1"
	3147	elif [ -d "/dev/mapper" ]; then
	3148	# LVM v2
	3149	LVMCMD="lvm"
	3150	LVM="v2"
	3151	else
	3152	LVM="false"
	3153	fi
[3149]	3154
	3155	if [ -e "/proc/cmdline" ]; then
	3156	CMDLINE="/proc/cmdline"
	3157	elif [ -e "/tmp/cmdline" ]; then
	3158	CMDLINE="/tmp/cmdline"
	3159	else
	3160	CMDLINE="/dev/null"
	3161	fi
	3162
[2963]	3163	LogFile "INFO: LVM set to $LVM"
	3164	LogFile "----------"
	3165	LogFile "mount result:"
	3166	LogFile "-------------"
[1230]	3167	mount >> $LOGFILE
[3479]	3168	if [ -e "/etc/raidtab" ]; then
[2963]	3169	LogFile "-------------"
	3170	LogFile "/etc/raidtab content:"
	3171	LogFile "-------------"
[1315]	3172	cat /etc/raidtab >> $LOGFILE
[3077]	3173	else
[3073]	3174	LogFile "No file /etc/raidtab"
[1315]	3175	fi
[3479]	3176	if [ -e "/etc/mdadm.conf" ]; then
[2981]	3177	LogFile "-------------"
	3178	LogFile "/etc/mdadm.conf content:"
	3179	LogFile "-------------"
	3180	cat /etc/mdadm.conf >> $LOGFILE
[3077]	3181	else
[3149]	3182	LogFile "-------------"
[3073]	3183	LogFile "No file /etc/mdadm.conf"
[2981]	3184	fi
[2963]	3185	LogFile "-------------"
[3149]	3186	LogFile "cat $CMDLINE"
[2963]	3187	LogFile "-------------"
[3149]	3188	cat $CMDLINE >> $LOGFILE
[2963]	3189	LogFile "-------------"
	3190	LogFile "cat /proc/swaps:"
	3191	LogFile "-------------"
[2014]	3192	cat /proc/swaps >> $LOGFILE
[2963]	3193	LogFile "-------------"
[3479]	3194	if [ -e "/proc/mdstat" ]; then
[3073]	3195	LogFile "cat /proc/mdstat:"
	3196	LogFile "-------------"
	3197	cat /proc/mdstat >> $LOGFILE
[3077]	3198	else
[3073]	3199	LogFile "No pseudo file /proc/mdstat"
	3200	fi
[2981]	3201	LogFile "-------------"
[2963]	3202	LogFile "cat /proc/partitions:"
	3203	LogFile "-------------"
[2015]	3204	cat /proc/partitions >> $LOGFILE
[2963]	3205	LogFile "-------------"
	3206	LogFile "cat /proc/filesystems:"
	3207	LogFile "-------------"
[2015]	3208	cat /proc/filesystems >> $LOGFILE
[2963]	3209	LogFile "-------------"
	3210	LogFile "lsmod result:"
	3211	LogFile "-------------"
[1021]	3212	lsmod >> $LOGFILE
[2431]	3213	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
[1531]	3214	if [ -x /usr/sbin/esxcfg-module ]; then
[2963]	3215	LogFile "-------------"
	3216	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
	3217	LogFile "-------------"
	3218	LogFile "VMWare modules"
	3219	LogFile "-------------"
[1531]	3220	/usr/sbin/esxcfg-module -l >> $LOGFILE
[2431]	3221	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
[1497]	3222	fi
[3149]	3223	LogFile "-------------"
[2963]	3224	LogFile "FORCE_MODS:"
	3225	LogFile "-------------"
[3065]	3226	LogFile "$FORCE_MODS"
[2963]	3227	LogFile "-------------"
	3228	LogFile "DENY_MODS:"
	3229	LogFile "-------------"
[3065]	3230	LogFile "$DENY_MODS"
[2963]	3231	LogFile "-------------"
	3232	LogFile "df result:"
	3233	LogFile "----------"
[3117]	3234	df -aT >> $LOGFILE
[2963]	3235	LogFile "-------------"
[3117]	3236	LogFile "df -i result:"
	3237	LogFile "----------"
	3238	df -i >> $LOGFILE
	3239	LogFile "-------------"
	3240	if [ -r /boot/grub/menu.lst ]; then
	3241	LogFile "-------------"
	3242	LogFile "INFO: /boot/grub/menu.lst content"
	3243	LogFile "-------------"
	3244	cat /boot/grub/menu.lst >> $LOGFILE
[3123]	3245	LogFile "-------------"
[3117]	3246	fi
[3123]	3247	if [ -r /boot/grub/grub.conf ]; then
[3117]	3248	LogFile "-------------"
[3123]	3249	LogFile "INFO: /boot/grub/grub.conf content"
	3250	LogFile "-------------"
	3251	cat /boot/grub/grub.conf >> $LOGFILE
	3252	LogFile "-------------"
	3253	fi
	3254	if [ -r /boot/grub/grub.cfg ]; then
	3255	LogFile "-------------"
	3256	LogFile "INFO: /boot/grub/grub.cfg content"
	3257	LogFile "-------------"
	3258	cat /boot/grub/grub.cfg >> $LOGFILE
	3259	LogFile "-------------"
	3260	fi
	3261	if [ -r /boot/grub/device.map ]; then
	3262	LogFile "-------------"
[3117]	3263	LogFile "INFO: /boot/grub/device.map content"
	3264	LogFile "-------------"
[3123]	3265	cat /boot/grub/device.map >> $LOGFILE
	3266	LogFile "-------------"
[3117]	3267	fi
[3643]	3268	if [ -r /boot/grub2/device.map ]; then
	3269	LogFile "-------------"
	3270	LogFile "INFO: /boot/grub2/device.map content"
	3271	LogFile "-------------"
	3272	cat /boot/grub2/device.map >> $LOGFILE
	3273	LogFile "-------------"
	3274	fi
[3117]	3275	if [ -r /etc/lilo.conf ]; then
	3276	LogFile "-------------"
	3277	LogFile "INFO: /etc/lilo.conf content"
	3278	LogFile "-------------"
	3279	cat /etc/lilo.conf >> $LOGFILE
	3280	fi
[3378]	3281	if [ -d /boot/efi ]; then
[3425]	3282	gcf=`find /boot/efi -name 'grub.c*'`
[3384]	3283	if [ _"$gcf" = _"" ]; then
[3425]	3284	LogFile "Found a /boot/efi directory without a grub config file in it"
[3384]	3285	else
	3286	LogFile "-------------"
	3287	LogFile "INFO: $gcf content"
	3288	LogFile "-------------"
	3289	cat $gcf >> $LOGFILE
	3290	LogFile "-------------"
	3291	fi
[3378]	3292	fi
	3293
[3146]	3294	LogFile "Full fdisk info"
	3295	LogFile "---------------"
	3296	$FDISK -l >> $LOGFILE
	3297	LogFile "----------------"
[747]	3298
[1723]	3299	# Compute libata version
[2649]	3300	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
[1723]	3301	# If libata v2 is used then remove ide-generic as it will perturbate boot
[1726]	3302	if [ "`echo $MODULES \| grep libata`" ]; then
[1727]	3303	if [ "$laver" = "2" ]; then
[1726]	3304	DENY_MODS="$DENY_MODS ide-generic"
[2963]	3305	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
	3306	LogFile "-------------"
[1726]	3307	fi
[1723]	3308	fi
	3309
[2963]	3310	# Check for McAfee which disturbs the access to some files (tgz in articular)
[2976]	3311	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
[2963]	3312	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
	3313	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
	3314	LogFile "WARNING: You have two options:"
	3315	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
	3316	LogFile "WARNING: - Disable the scanner during the backup"
	3317	fi
	3318
[1684]	3319	#
	3320	# If we have a USB device we need to store info
	3321	# and remove it from the parameters line
	3322	#
[747]	3323	if [ "$#" -ne "0" ] ; then
[1684]	3324	if [ "$1" = "--usb" ] ; then
	3325	shift
	3326	USBDEVICE=$1
	3327	if [ _"$USBDEVICE" = _"" ]; then
	3328	Die "No USB device specified"
	3329	fi
	3330	shift
	3331	fi
	3332	fi
	3333
	3334	if [ "$#" -ne "0" ] ; then
[747]	3335	if [ "$1" = "--findkernel" ] ; then
[2880]	3336	resk=`TryToFindKernelPath`
[1336]	3337	# Avoids logfile content for mondo
	3338	export MONDO_SHARE=""
[2880]	3339	if [ "$resk" = "" ] ; then
[2838]	3340	if [ $KERNEL_IS_XEN = "yes" ]; then
	3341	echo "$xenkernelpath"
[2963]	3342	LogFile "INFO: xenkernelpath = $xenkernelpath"
[2860]	3343	MindiExit 0
[2838]	3344	else
[2860]	3345	MindiExit -1
[2838]	3346	fi
[747]	3347	else
[2880]	3348	echo "$resk"
[2963]	3349	LogFile "INFO: kernelpath = $resk"
[2860]	3350	MindiExit 0
[747]	3351	fi
[1720]	3352	elif [ "$1" = "--locatedeps" ] ; then
	3353	[ ! "$2" ] && Die "Please specify the binary to look at"
[2438]	3354	LocateDeps $*
[1720]	3355	# Avoids logfile content for mondo
	3356	export MONDO_SHARE=""
	3357	MindiExit $?
[1815]	3358	elif [ "$1" = "--readalllink" ] ; then
	3359	[ ! "$2" ] && Die "Please specify the binary to look at"
	3360	# Avoids logfile content for mondo
	3361	export MONDO_SHARE=""
[3231]	3362	mr-read-all-link $2
[1815]	3363	MindiExit $?
[3518]	3364	elif [ "$1" = "--makebcf" ] ; then
[3520]	3365	[ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
[3518]	3366	MakeBootConfFile $2
[3519]	3367	MindiExit 0
[2731]	3368	elif [ "$1" = "--makemessage" ] ; then
[2948]	3369	MakeMessageFile \| cut -c1-80
[2731]	3370	MindiExit 0
[747]	3371	elif [ "$1" = "--makemountlist" ] ; then
	3372	[ ! "$2" ] && Die "Please specify the output file"
	3373	MakeMountlist $2
[2432]	3374	CheckMountlist $2
[1336]	3375	# Avoids logfile content for mondo
	3376	export MONDO_SHARE=""
[925]	3377	MindiExit $?
	3378	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
	3379	echo "Mindi v$MINDI_VERSION"
[1336]	3380	# Avoids logfile content for mondo
	3381	export MONDO_SHARE=""
[925]	3382	MindiExit 0
[3585]	3383	elif [ "$1" = "--ironic" ] ; then
	3384	[ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
	3385	[ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
	3386	[ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
	3387	#TODO: See how we can influence the boot loader
	3388	[ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
	3389	if [ "$5" ]; then
	3390	boottype=$5
	3391	fi
	3392	[ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
	3393	if [ "$6" ]; then
	3394	bootbin=$6
	3395	fi
	3396	kernelpath=$2
	3397	BOOT_TYPE=$4
[3590]	3398	# Ironic requires some specific boot parameters
[3588]	3399	MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
	3400	MINDI_BOOT_TIMEOUT=10
[3590]	3401	EXTRA_SPACE=1500000
	3402	# Get the local improvements to the configuration
[3589]	3403	if [ -f $MINDI_CONFIG ]; then
	3404	. $MINDI_CONFIG
	3405	fi
[3585]	3406	PrepareBootDir
[3692]	3407	PrepareBigDirTar
	3408	CleanBigDir
[3585]	3409	cp $3 $MINDI_TMP/initrd.img
	3410	MakeBootableDevice ISO
	3411	MindiExit 0
[747]	3412	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
[940]	3413	MONDO_TMP=$2
[3661]	3414	# Change MINDI_TMP for the one provided by mondo
[940]	3415	# So that it can get back the built files
[2153]	3416	if [ _"$MONDO_TMP" = _"" ]; then
	3417	Die "MONDO_TMP is empty, aborting"
	3418	fi
	3419	if [ _"$MONDO_TMP" = _"/" ]; then
	3420	Die "MONDO_TMP is /, aborting"
	3421	fi
[2092]	3422	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
[1010]	3423	rmdir $MINDI_TMP
[1486]	3424	export MINDI_TMP=$MONDO_TMP
[953]	3425	mkdir -p $MINDI_TMP
[2238]	3426
[1696]	3427	# This is the scratch dir in mondo - subdir images
[1880]	3428	MINDI_CACHE=$3
[3388]	3429	LogFile "MINDI_CACHE = $MINDI_CACHE"
[2238]	3430
[925]	3431	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
[2681]	3432	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
	3433
[747]	3434	###
	3435	### Sq-Modification...
	3436	### Attempt to locate kernel specific module path
	3437	### if module path is found then use it other wise use uname -r to set it...
	3438	###
[2629]	3439	if [ $KERNEL_IS_XEN = "yes" ]; then
[3149]	3440	LogAll "INFO: xenkernelpath = $xenkernelpath"
[2629]	3441	fi
[2657]	3442	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
[3231]	3443	if [ ! -d "/lib/modules/$kernelname" ]; then
[3149]	3444	LogAll "WARNING: Module path for ${kernelpath} not found..."
	3445	LogAll " using running kernel\'s modules."
[2292]	3446	kernelname=$KERVERRUN
[3149]	3447	else
[3426]	3448	LogAll "INFO: Using modules for kernel: ${kernelname}"
[747]	3449	fi
[3149]	3450	LogAll "INFO: kernelname = $kernelname"
	3451	LogAll "INFO: kernelpath = $kernelpath"
[747]	3452	###
	3453	### end of Sq-Modification
	3454	###
[925]	3455	TAPEDEV=$5
	3456	TAPESIZE=$6
	3457	FILES_IN_FILELIST=$7
	3458	USE_LZO=$8
	3459	CDRECOVERY=$9
[747]	3460	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
	3461	IMAGE_DEVS=""
	3462	else
	3463	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
	3464	fi
[925]	3465	if [ "${11}" ] ; then
	3466	LILO_OPTIONS=""
[3149]	3467	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
[925]	3468	fi
	3469	LAST_FILELIST_NUMBER=${12}
[747]	3470	ESTIMATED_TOTAL_NOOF_SLICES=${13}
[2564]	3471	export MINDI_EXCLUDE_DEVS="${14}"
[747]	3472	USE_COMP="${15}"
	3473	USE_LILO="${16}"
[925]	3474	USE_STAR="${17}"
	3475	INTERNAL_TAPE_BLOCK_SIZE="${18}"
[747]	3476	DIFFERENTIAL="${19}"
[998]	3477	USE_GZIP="${20}"
[3353]	3478	USE_LZMA="${21}"
	3479	NOT_BOOT="${22}"
[3397]	3480	BOOT_TYPE="${23}"
[747]	3481	[ "$USE_COMP" = "" ] && USE_COMP=yes
[998]	3482	[ "$USE_GZIP" = "" ] && USE_GZIP=no
[3353]	3483	[ "$USE_LZMA" = "" ] && USE_LZMA=no
[747]	3484	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
[3565]	3485	[ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
[1696]	3486	# MONDO_ROOT is the real scratchdir
[1880]	3487	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
[938]	3488	if [ _"$MONDO_ROOT" != _"" ]; then
	3489	mkdir -p $MONDO_ROOT
	3490	else
	3491	Die "MONDO_ROOT is undefined"
	3492	fi
[747]	3493	else
[3585]	3494	LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
	3495	LogScreen " mindi --ironic kernel initrd [BIOS\|UEFI] [syslinux\|grub\|grub2] [/path/to/bootloader]"
	3496	LogScreen " mindi --locatedeps file"
	3497	LogScreen " mindi --makemessage"
[3586]	3498	LogScreen " mindi --findkernel"
[3585]	3499	LogScreen " mindi --makemountlist file"
	3500	LogScreen " mindi --makebcf bootloader"
	3501	LogScreen " mindi -V"
[925]	3502	MindiExit -1
[747]	3503	fi
	3504	fi
[2238]	3505
	3506	if [ _"$MINDI_CACHE" != _"" ]; then
	3507	rm -rf $MINDI_CACHE/* 2> /dev/null
	3508	mkdir -p $MINDI_CACHE
	3509	fi
	3510
[747]	3511	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
	3512
[1684]	3513	if [ _"$MONDO_SHARE" = _"" ]; then
[3565]	3514	LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
	3515	LogAll "Latest Mindi is available from http://www.mondorescue.org"
	3516	LogAll "BusyBox sources are available from http://www.busybox.net"
	3517	LogAll "------------------------------------------------------------------------------"
[747]	3518	else
[3426]	3519	LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
[747]	3520	fi
[3231]	3521	if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
[3565]	3522	LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 \| head -1`"
[1005]	3523	else
[3565]	3524	LogAll "ERROR: Unable to find mindi-busybox, please install it"
[1005]	3525	MindiExit -1
	3526	fi
[747]	3527
	3528	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
[3111]	3529	modinfo $i 2> /dev/null 1> /dev/null
[3014]	3530	if [ $? -eq 0 ]; then
	3531	modprobe $i 2>&1 > /dev/null
	3532	fi
[747]	3533	done
	3534
[2963]	3535	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
	3536	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
	3537	LogFile "NOT_BOOT = '$NOT_BOOT'"
[747]	3538	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
[3565]	3539	LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
[3278]	3540	MakeMondoConfigFile $MINDI_TMP/$MRCFG
[940]	3541	MakeMountlist $MINDI_TMP/mountlist.txt
[2432]	3542	CheckMountlist $MINDI_TMP/mountlist.txt
[940]	3543	mkdir -p $MINDI_TMP/small-all/tmp
[3565]	3544	cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
	3545	(cd $MINDI_TMP/small-all ; tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
[747]	3546	sleep 2
[3565]	3547	LogAll "Done. Exiting."
[925]	3548	MindiExit 0
[747]	3549	fi
	3550
[1690]	3551	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[3565]	3552	LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
[1684]	3553	fi
	3554
[747]	3555	if [ "$kernelpath" = "" ] ; then
[1335]	3556	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
[3522]	3557	echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
[966]	3558	read ch
	3559	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
[3651]	3560	USE_OWN_KERNEL="yes"
[1809]	3561	else
	3562	USE_OWN_KERNEL="no"
[747]	3563	fi
	3564	if [ "$USE_OWN_KERNEL" = "yes" ]; then
[925]	3565	kernelpath=`TryToFindKernelPath`
	3566	if [ "$kernelpath" = "" ] ; then
	3567	echo -n "Please enter kernel path : "
	3568	read kernelpath
	3569	fi
[747]	3570	fi
	3571	fi
[3231]	3572
[1880]	3573	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
[3565]	3574	[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
[747]	3575
[3692]	3576	PrepareBigDir
	3577	bigdir_size=`du -sk $bigdir \| cut -f1`
	3578	LogFile "---------------------------"
	3579	LogFile "INFO: bigdir size is $bigdir_size KB"
[1983]	3580
[3692]	3581	PrepareTargetDir \|\| Die "Could not create initrd.img in target dir"
	3582	targetdir_size=`du -sk $targetdir \| cut -f1`
	3583	LogFile "---------------------------"
	3584	LogFile "INFO: targetdir size is $targetdir_size KB"
	3585	LogFile "---------------------------- "
[3522]	3586
[3692]	3587	# Now we can compute it correctly with some extra in case of...
	3588	export ramdisk_size=$(($bigdir_size+$targetdir_size+$EXTRA_SPACE))
	3589	# And now we can patch the value in conf files
	3590	PatchBootFiles
	3591	# And tar them
	3592	PrepareBigDirTar
	3593	# And prepare boot setup
	3594	MakeBootInitFile
	3595	# Now cleans up stuff
	3596	CleanBigDir
	3597	CleanTargetDir
	3598
[747]	3599	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
[3653]	3600	...Or type 'memtest' to test your machine's RAM thoroughly.\n"
[747]	3601
[1684]	3602	if [ _"$MONDO_SHARE" = _"" ]; then
[1983]	3603	OfferToMakeBootableISO
[1684]	3604	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
[1983]	3605	OfferToMakeBootableUSB
[1684]	3606	fi
[3522]	3607	LogAll "INFO: Mindi Finished"
[747]	3608	elif [ "$TAPEDEV" ] ; then
[2078]	3609	if [ "$ARCH" != "ia64" ] ; then
	3610	# We need to keep the img file as boot file for ia64 platform
	3611	rm -f $MINDI_CACHE/{img,iso}
	3612	else
	3613	rm -f $MINDI_CACHE/*iso
	3614	fi
[1898]	3615	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3616	OfferToMakeBootableUSB
[1898]	3617	fi
[1983]	3618	OfferToMakeBootableISO
[1880]	3619	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
	3620	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
[747]	3621	else
[925]	3622	Die "Cannot find all.tar.gz, to be written to tape"
[747]	3623	fi
[1695]	3624	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
[1983]	3625	OfferToMakeBootableUSB
[747]	3626	else
[1983]	3627	OfferToMakeBootableISO
[747]	3628	fi
[3391]	3629
[3396]	3630	if [ -f $MINDI_TMP/$MRCFG ]; then
[3425]	3631	LogFile "INFO: Your $MRCFG file is:"
	3632	LogFile "--------------------------"
	3633	cat $MINDI_TMP/$MRCFG >> $LOGFILE
	3634	LogFile "--------------------------"
[3391]	3635	else
[3421]	3636	if [ _"$MONDO_SHARE" != _"" ] ; then
[3565]	3637	LogAll "ERROR: You don't have a $MRCFG file !"
[3421]	3638	fi
[3391]	3639	fi
[747]	3640	# cleanup
[925]	3641	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: