source: branches/3.3/mindi/mindi @ 3710

Last change on this file since 3710 was 3710, checked in by bruno, 5 months ago

Add support for SLES 12/15 with UEFI and grub2

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 128.1 KB
RevLine 
[747]1#!/bin/bash
2
3# $Id: mindi 3710 2019-01-05 00:12:48Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
[1880]8# Mindi can create a multi-image boot/root kit. The first image is the boot
[747]9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
[1565]16ARCH=`/bin/uname -m`
[2292]17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
[747]20
[2442]21# In case of problem with udev you can try to add udevdebug
[2564]22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
[3053]23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
[747]27
[1691]28MINDI_REV=PBREV
29MINDI_VER=PBVER
[747]30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
[934]35MINDI_LIB=LLL
[3149]36MINDI_CACHE=/var/cache/mindi
[747]37
[3278]38MRCFG=mondorestore.cfg
39
[925]40# Temporary directory for mindi
[3499]41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
[925]45
[3692]46EXTRA_SPACE=20000       # increase if you run out of ramdisk space - Default 20 MB
[747]47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
[3522]50    # if this is set to 'no' in the conf file, then the image will be created automatically
[747]51
[1684]52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
[3522]54    # if this is set to 'no' in the conf file, then the image will be created automatically
[1684]55
[966]56USE_OWN_KERNEL="yes"
[747]57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
[925]60
[2629]61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
[2880]64xenkernelpath=""
[2629]65 
[747]66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
[3693]68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa smartpqi dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
[747]69
70# ide-probe-mod
[3661]71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456 drbd"
[747]72PCMCIA_MODS="pcmcia_core ds yenta_socket"
[3605]73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic hid_microsoft hid-microsoft uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
[3446]74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
[3607]75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs ntfs nls_utf8"
[1230]76# Replace with that line for HP OCMP e.g.
[2073]77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
[3055]78DENY_MODS="kqemu vxfen"
[1399]79# Force some modules to be included
[1354]80FORCE_MODS=""
[925]81
[747]82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
[3173]84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
[747]96"
[3377]97FDISK=$MINDI_SBIN/mr-parted2fdisk
[747]98
[925]99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
[1885]104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
[2409]105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
[3502]107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
[3505]116    ISO_CMD="/usr/bin/genisoimage"
[3515]117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
[3502]127fi
128
[3596]129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
[925]130
[3421]131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
[3429]136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
[3421]143fi
[3403]144
[2880]145# Function to log on screen only
146LogScreen() {
[3368]147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
[2880]152}
[2685]153
[2880]154# Function to log in log file only
155LogFile() {
156
[3368]157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
[3403]159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[3432]160        rm -f "$2"
[3368]161    fi
[2880]162}
163
164# Function to log in both screen and logfile
165LogAll() {
[3368]166    LogScreen "$1"
167    LogFile "$1" "$2"
[2880]168}
169
[2963]170# Last function called before exiting
171# Parameter is exit code value
172# Should be declared here as used immediately below potentialy
173MindiExit() {
[3522]174    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
175    LogFile "INFO: End date : `date`" 
[2963]176    if [ _"$MONDO_SHARE" != _"" ] ; then
177        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
[2995]178        if [ -f $LOGFILE ]; then
179            cat $LOGFILE >> /var/log/mondoarchive.log
180        else
181            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
182        fi
[2963]183        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184    fi
[2880]185
[2963]186    cd /
187    sync&
188
189    # Clean temporary files only when standalone mindi
190    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191        rm -Rf $MINDI_TMP
192    fi
193    exit $1
194}
195
[2685]196Die() {
197    if [ "$1" = "" ] ; then
[3149]198        LogAll "FATAL ERROR"
[2685]199    else
[3149]200        LogAll "FATAL ERROR. $1"
[2685]201    fi
202    if [ _"$2" != _"" ]; then
[3403]203        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
[2685]204    fi
205    rm -f "$2"
206
[3149]207    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
208    LogAll "See http://www.mondorescue.org for more information."
209    LogAll "WE CANNOT HELP unless you enclose that file.\n"
[2685]210    MindiExit -1
211}
212
[1485]213# Now we can create what we need
[2150]214MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
215if [ $? -ne 0 ]; then
216    df $TMPDIR
217    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
218fi
[2153]219if [ _"$MINDI_TMP" = _"" ]; then
220    Die "MINDI_TMP is empty, aborting"
221fi
222if [ _"$MINDI_TMP" = _"/" ]; then
223    Die "MINDI_TMP is /, aborting"
224fi
[2150]225export MINDI_TMP
[940]226
[747]227# ----------------------------------------------------------------------------
228
229
230AbortHere() {
231    Die "Program is terminating in response to signal received from OS/user"
232}
233
234
235Aborted() {
236    trap SIGHUP SIGTERM SIGTRAP SIGINT
[1880]237    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
[747]238    Die "User abort."
239}
240
241
242AddFileToCfgIfExists() {
243    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
244}
245
246
247AddKeyboardMappingFile() {
248    local mappath r included_list included_item i res ii sss
249    mappath=$1
250    KBDEPTH=$(($KBDEPTH+1))
251    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
252    if [ -e "$bigdir/$mappath" ] ; then
[3149]253        LogFile "INFO: $mappath already added"
[747]254        return
255    elif [ -d "$bigdir/$mappath" ] ; then
256        echo "Cannot add $mappath: it's a directory. Sorry."
257        return
258    fi
[3149]259    LogFile "INFO: Added kbd map $mappath"
[747]260    if [ ! -e "$mappath" ] ; then
[3149]261        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
[747]262        if [ ! -e "$mappath" ] ; then
[3149]263            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
[747]264            return
265        fi
266    fi
267
[3149]268    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
[747]269    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
[3023]270        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
[747]271    else
[3023]272        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
[747]273    fi
274    for included_item in $included_list ; do
[925]275        if [ ! -e "$included_item" ] ; then
[3149]276            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
[1764]277            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
[925]278            for ii in $sss ; do
[3546]279                [ -e "$ii" ] && AddKeyboardMappingFile $ii
[925]280            done
281        else
282            AddKeyboardMappingFile $included_item
283        fi
[747]284    done
285}
286
287
288CopyDependenciesToDirectory() {
[3403]289    local outdir incoming counter d found tdir templog
[747]290    outdir=$1
[3403]291    templog=$MINDI_TMP/$$.log
[747]292    mkdir -p $outdir
293    incoming=`ReadLine`
[3522]294    counter=$3
[3403]295    > $templog
296
[747]297    while [ "$incoming" != "" ] ; do
[3522]298        if [ "$3" = "1" ]; then
299            counter=$(($counter+1))
300            LogProgress $counter $2
301        fi
[1526]302        # Non absolute file names should not arrive till here => skipped
303        if [ `echo "$incoming" | cut -c1` != '/' ]; then
[3149]304            LogAll "WARNING: Unable to handle $incoming"
[1526]305            incoming=`ReadLine`
306            continue
307        fi
308        # no parent directory of incoming should be a link, copy is not possible in that case
309        d=`dirname "$incoming"`
310        found="false"
311        while [ $d != "/" -a $found = "false" ]; do
312            [ -h "$d" ] && found="true"
313            d=`dirname "$d"`
314        done
[3166]315        if [ -d "$incoming" -a ! -h "$incoming" ]; then
[3522]316            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
[1526]317        elif [ -e "$incoming" ] && [ $found = "false" ]; then
[3075]318            if [ ! -h "$incoming" ]; then
[3405]319                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
[3075]320            else
321                tdir=`dirname "$incoming"`
322                if [ ! -e "$outdir/$tdir" ]; then
323                    mkdir -p "$outdir/$tdir"
324                fi
325                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
326            fi
[1989]327            # Only uncompress modules if not using udevd
328            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
[3149]329                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
[925]330            fi
[3075]331            [ -x "$outdir" ] && StripExecutable $outdir
[747]332        fi
333        incoming=`ReadLine`
334    done
335}
336
337
338CountItemsIn() {
339    local r
340    r=0
341    for q in $1 ; do
342        r=$(($r+1))
343    done
344    echo $r
345}
346
347
348DropOptimizedLibraries() {
349    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
350    filelist=$1
351    outdir=$2
352
353    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
354    if [ "$list_of_optimized_libraries" = "" ] ; then
[859]355        return 0
[747]356    fi
357    echo -en "Dropping i686-optimized libraries if appropriate"
358    for optimized_lib_name in $list_of_optimized_libraries ; do
[859]359        echo -en "."
360        reason=""
[1483]361        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
[859]362        echo "$vanilla_lib_name" >> $filelist
[2963]363        LogFile "INFO: Adding $vanilla_lib_name to filelist"
[859]364        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
365        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
[2168]366
367        # This may return multiple files
[3231]368        for resolved in `mr-read-all-link $vanilla_lib_name`; do
[2963]369            LogFile "INFO: Adding as deps $resolved to filelist"
[2168]370            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
[3149]371            if [ "$vanilla_resolved_name" != "$resolved" ]; then
372                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
373                rmdir $outdir$resolved > /dev/null 2> /dev/null
374                ln -sf $vanilla_resolved_name $outdir$resolved
375                LogFile "INFO: Excluding deps $resolved" 
376                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
377                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
378                echo "$vanilla_resolved_name" >> $filelist.tmp
379                mv -f $filelist.tmp $filelist
380            fi
[2168]381        done
[747]382    done
[925]383    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
[747]384    mv -f $filelist.tmp $filelist
385    echo -e "$DONE"
386}
387
388
389FindAndAddUserKeyboardMappingFile() {
390    local r res mapfile mappath included_item included_list keyfile mp locale
[3149]391    LogAll "INFO: Analyzing your keyboard's configuration."
[3231]392    KEYDIR=/usr/lib/kbd
[747]393    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
[3347]394    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
395    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
[3231]396    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
[747]397    if [ ! -e "$KEYDIR" ] ; then
[3149]398        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
[747]399        return 0
[3569]400    else
401        LogFile "INFO: KEYDIR=$KEYDIR"
[747]402    fi
403    if [ -e "/etc/sysconfig/keyboard" ] ; then
[2963]404        LogFile "INFO: Red Hat-style config detected."
[747]405        keyfile=/etc/sysconfig/keyboard
[3257]406    elif [ -e "/etc/vconsole.conf" ] ; then
407        LogFile "INFO: New Fedora style config detected."
408        keyfile=/etc/vconsole.conf
[747]409    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
[2963]410        LogFile "INFO: Slackware-style config detected."
[747]411        keyfile=/etc/rc.d/rc.keymap
412    elif [ -e "/etc/rc.config" ] ; then
[2963]413        LogFile "INFO: Debian-style config detected."
[747]414        keyfile=/etc/rc.config
415    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
[2963]416        LogFile "INFO: Debian-style config detected."
[747]417        mkdir -p $bigdir/tmp
[3278]418        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
[747]419        KBDEPTH=0
420        mkdir -p $bigdir/etc/console
[963]421        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
[2864]422        echo ""
[747]423        echo -e "$DONE"
424        return 0
[2828]425    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
[2963]426        LogFile "INFO: Ubuntu-style config detected."
[1713]427        mkdir -p $bigdir/tmp
[2828]428        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
429            kbdfile="/etc/console-setup/boottime.kmap.gz"
430        else
431            kbdfile="/etc/console-setup/cached.kmap.gz"
432        fi
[3278]433        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
[1713]434        KBDEPTH=0
435        mkdir -p $bigdir/etc/console-setup
[2828]436        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
[2864]437        echo ""
[1713]438        echo -e "$DONE"
439        return 0
[3595]440    elif [ -e "/etc/default/keyboard" ]; then
441        LogFile "INFO: New Debian-style config detected."
442        keyfile=/etc/default/keyboard
[2744]443    elif [ -e "/etc/rc.conf" ] ; then
[2963]444        LogFile "INFO: ArchLinux config detected."
[2744]445        keyfile=/etc/rc.conf
[1465]446    elif [ -e "/etc/conf.d/keymaps" ] ; then
[2963]447        LogFile "INFO: Gentoo-style config detected."
[1465]448        keyfile=/etc/conf.d/keymaps
[3191]449    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
450        LogFile "INFO: X11-style config detected."
451        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
[747]452    else
[3149]453        LogFile "Searching for rc.config ..."
[747]454        keyfile=`find /etc -name rc.config | head -n1`
455        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
[3149]456            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
[747]457            return
458        else
[2963]459            LogFile "INFO: Found $keyfile"
[747]460        fi
461    fi
462    if [ ! -e "$KEYDIR/keymaps" ] ; then
[3149]463        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
[747]464        return
465    fi
[2963]466    LogFile "INFO: keyfile=$keyfile"
[2999]467    # For SLES we need to remove the .map.gz extension Cf #614
468    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
[747]469    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
[3595]470    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`             # Gentoo, ArchLinux & New fedora
[3191]471    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
[3595]472    [ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" | grep -v '^#' | cut -d= -f2 | tr -d '"'`            # New Debian 8+
[2963]473    LogFile "INFO: locale=$locale"
[1764]474    #
475    # Process the keymaps dir once for all
476    # AddKeyboardMappingFile will use it recursively
477    #
478    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
479    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
480    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
[3571]481    # For new distro such as RHEL 7 we need that additional search
482    [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
[747]483    # If we have multiple keymaps then log it !!
[3149]484    echo "$mp" | grep -q " " >> $LOGFILE
[747]485    if [ $? -eq 0 ]; then
[2963]486        LogAll "WARNING: Multiple keymaps found: $mp"
487        LogFile "INFO: The following one will be used"
[747]488    fi
489    for i in $mp ; do
490        mappath=$i
491        [ -e "$i" ] && [ ! -d "$i" ] && break
492    done
493    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
[3688]494        mappath=$(find /usr /lib /lib64 -path "*/kbd/keymaps/*/$locale | head -1")
[747]495    fi
[2963]496    LogFile "INFO: mappath = $mappath"
[747]497    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
[3149]498        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
[747]499        return
500    fi
[3535]501    echo -en "INFO: Adding keyboard mapping tables"
[747]502    mkdir -p $bigdir/tmp
[3278]503    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
[2055]504    KBDEPTH=0
[747]505    AddKeyboardMappingFile $mappath
506    echo -e "$DONE"
[1764]507    rm -f $MINDI_TMP/keymaps.find
[747]508    return 0
509}
510
511
[3241]512FindLdlinux32Binary() {
513    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
514    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
515    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
517    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
[3303]518    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
519    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
[3241]520    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
521    if [ ! -e "$LDLINUXC32" ]; then 
522        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
523        LDLINUXC32=/tmp/idoesnthopefullyexist
524    else
525        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
526    fi
527}
528
529
[2629]530FindMboot32Binary() {
531    MBOOTC32=/usr/lib/syslinux/mboot.c32
532    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
533    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
[3303]536    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
537    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
[2629]538    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
[2921]539    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]540    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
[2629]541}
542
[3476]543FindLdlinuxe64Binary() {
544    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
545    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
546    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
548    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
549    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
550    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
551    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
552    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
553}
554
555FindSyslinux64EFI() {
556    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
557    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
558    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
560    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
561    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
562    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
[3491]563    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[3476]564    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
565}
566
[747]567FindIsolinuxBinary() {
568    ISOLINUX=/usr/lib/isolinux.bin
569    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
[1491]570    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
[747]571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
[1491]573    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
[3304]574    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
[1854]575    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
[2921]576    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
[2963]577    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
[747]578}
579
580
581GenerateGiantDependencyList() {
[3522]582    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
[747]583
[3522]584    echo -en "INFO: Analyzing dependency requirements"
[747]585    outfile=$1
[940]586    tempfile=$MINDI_TMP/$$.txt
[747]587    incoming=`ReadLine`
588
589    > $tempfile
590    progress=0
591    res=0
592    noof_lines=$2
593    while [ "$incoming" != "" ] ; do
[861]594        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
595            incoming=`ReadLine`
596            continue
597        fi
598        if [ "$incoming" = "LVMFILES:" ] ; then
599            break
600        fi
[747]601        filelist=`GenerateListForFile "$incoming"`
602        r=$?
[3149]603        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
[747]604        res=$(($res+$r))
[2963]605#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
[747]606        for fname in $filelist ; do
[3321]607            [ "$fname" != "" ] && echo "$fname" >> $tempfile
[747]608        done
609        progress=$(($progress+1))
[3149]610        LogProgress $progress $noof_lines
[747]611        incoming=`ReadLine`
612    done
[861]613    if  [ "$incoming" = "LVMFILES:" ] ; then
614        incoming=`ReadLine`
615        lvmversion=""
616        while [ "$incoming" != "" ] ; do
617            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
618                incoming=`ReadLine`
619                continue
620            fi
621            filelist=`GenerateListForFile "$incoming"`
622            for tool in $filelist ; do
[3662]623            lvmresolved=`readlink -f $tool`
624            if [ "$tool" = "$lvmresolved" ]; then
625                echo "$tool" >> $tempfile
626            elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
627                if [ "$lvmversion" = "" ] ; then
628                    lvmversion=`$lvmresolved`
629                    echo "$lvmresolved" >> $tempfile
630                fi
631                toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
632                if [ "$lvmversion" = "200" ]; then
633                    # pvdata and lvmcreate_initrd don't exist in LVM2
634                    case "$toolstripped" in
635                    "pvdata")
[861]636                            continue
637                            ;;
[3662]638                    "lvmcreate_initrd")
[861]639                            continue
640                            ;;
641                        esac
[3662]642                fi
643                toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
644                if [ -e "$toolpath" ] ; then
[861]645                        echo "$toolpath" >> $tempfile
646                        echo "$tool" >> $tempfile
[3662]647                else
[861]648                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
[3662]649                fi
650                if [ -e "$toolpath" ] ; then
651                    echo "$toolpath" >> $tempfile
652                    echo "$tool" >> $tempfile
[861]653                else
[3662]654                    echo "Where are your LVM-Tools? Couldn't find $tool"
655                fi
656                else
[861]657                    echo "$tool" >> $tempfile
658                fi
659            done
660            progress=$(($progress+1))
[3149]661            LogProgress $progress $noof_lines
[861]662            incoming=`ReadLine`
663        done
[747]664    fi
[3661]665    echo -e "$DONE"
[747]666
[3661]667    echo -en "INFO: Making complete dependency list..."
[747]668    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
669    mv -f $tempfile.new $tempfile
670    > $outfile.pre
671    progress=0
672    noof_lines=`cat $tempfile | wc -l`
[2963]673    LogFile "---------------------------------"
674    LogFile "List of dependencies:             "
675    LogFile "---------------------------------"
[747]676    for fname in `cat $tempfile` ; do
[1876]677        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
678        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
[925]679        progress=$(($progress+1))
[3149]680        LogProgress $progress $noof_lines
[747]681    done
[1684]682    if [ _"$MONDO_SHARE" != _"" ]; then
[925]683        mkdir -p $bigdir/tmp
[3172]684        mkdir -p $bigdir/usr/bin
[940]685        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
[3149]686            LogAll "\nINFO: Incorporating post-nuke tarball"
[3522]687            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
[747]688        fi
[963]689        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
[3661]690            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
[925]691        else
[3565]692            LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
693            LogAll "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
[3661]694            LogAll "       If Mindi was called by Mondo then send a bug report."
[3565]695            LogAll "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
696            LogAll "       Finally, run Mindi again."
[3661]697            Die "Odd."
[925]698        fi
[3565]699        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
[3270]700        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3149]701            LogAll "\nINFO: Incorporating Network-related settings"
[3278]702            for r in NETFS-* ; do
[963]703                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
[2963]704                LogFile "INFO: Copying $r to ramdisk"
[925]705            done
706        fi
[747]707    fi
[925]708    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
[747]709    rm -f $tempfile $outfile.pre
[3661]710    [ "$res" -eq "0" ] && echo -e "$DONE" || echo "\nFailed."
[747]711    return $res
712}
713
714
715GenerateListForFile() {
[3692]716    local files_found fname incoming
[747]717    incoming="$1"
718    files_found=""
719
720    for fname in $incoming ; do
721        files_found="$files_found `LocateFile $fname`"
722    done
723
724    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
725}
726
727
728# Returns all disk devices which are part of a raid array
729GetAllRaidMembers() {
730    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
731}
732
733
734GetFileSizeList() {
735    local i
736    for i in `find $1 -type d -o -print` ; do
737        du -sk $i
738    done
739}
740
741
[1230]742# Check kernel filesystem capabilites for accessing initrd image
[2429]743# Could be ext2 FS (old mode) or initramfs (new mode)
[1230]744#
745# Interface definition:
746# param #1: absolute path to kernel image
747GetInitrdFilesystemToUse() {
748
749    # interface test: make sure we have one parameter
750    if [ $# -ne 1 ]; then
751        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
752    fi
753
754    # interface parameters
755    local lvKernelImage=$1
756
757    # local constants (filesystem magic strings)
758    local lcMagicCramfs="<3>cramfs: wrong magic"
[2047]759    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
[2390]760    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
[3353]761    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
[1230]762
763    # local variables
764    local lvOffset
765    local lvScanRes
766    local lvUseFilesystem
767
768    # say where we are.
[3111]769    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
[1230]770
771    # verify that file exists
772    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
773
[3111]774    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
[1730]775    file $lvKernelImage 2>&1 | grep -q gzip
[1566]776    if [ $? -eq 0 ]; then
[3111]777        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
778        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
779    else
780        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
781        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
782        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
783        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
784        if [ $lvOffset -eq 0 ]; then
785            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
786            lvScanRes=$lcMagicInitfs
[2393]787        else
[3111]788            lvOffset=`expr $lvOffset / 2`
789            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
790            # scan again  kernel image
791            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
[2393]792        fi
[3111]793    fi
[2393]794
[3111]795    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
796    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
797        lvUseFilesystem="ext2fs"
798    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
799        lvUseFilesystem="ext3fs"
800    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
801        lvUseFilesystem="initramfs"
802    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
803        lvUseFilesystem="cramfs"
[2429]804    else
[3111]805        # In that case, we are most probably after 2.6.30 and use the supported initramfs
[3181]806        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
807        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
808        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
[1230]809        lvUseFilesystem="initramfs"
810    fi
[3111]811
[1230]812    # say what we are using
[3111]813    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
[1230]814
815    # return file system to use
816    echo "$lvUseFilesystem"
817
818}
819
[747]820# Searches members of raid device
821# $1: raid device (/dev/md...)
822GetRaidDevMembers() {
[2917]823    if [ ! -f /etc/raidtab ]; then 
824        return
825    fi
[747]826    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
827}
828
829
830ListAllPartitions() {
[3702]831    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}' | sort -u
[747]832    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
[1824]833    if [ -e "/vmfs/volumes" ]; then
834        # For VMWare ESX 3 get the device names of these volumes
[2431]835        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
[1824]836    fi
[747]837    return
838}
839
840
841ListKernelModulePaths() {
[2583]842    local module_list module fname r kern
[1399]843    module_list="$MODULES"
[1230]844    # Remove unwanted modules from list
845    for i in $DENY_MODS; do
846        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
847    done
[747]848###
849### Sq-Modification ... Use kernelname for module search path if specified
850###
[3231]851    if [ "${kernelname}" != "" ]
[747]852    then
853        kern=${kernelname}
854    else
[2292]855        kern="$KERVERRUN"
[747]856    fi
[2292]857    export KERVER=$kern
[747]858###
859### Sq-Mod End
860###
[3310]861    # Get rid of duplicates
862    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
[747]863        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
[2471]864        if [ -z "$r" ]; then
865            if [ "`echo "$MODULES" | grep -w $module`" ]; then
866                r="[live module file not found]"
867            else
868                r="[extra module file not found]"
869            fi
[2583]870        else
871            [ -f "$r" ] && echo "$r"
[2471]872        fi
[2963]873        LogFile "INFO: module $module --> $r"
[747]874    done
875    find /lib/modules/$kern/modules.* -type f 2> /dev/null
876}
877
[1784]878#
879# Critical function which computes all dependencies (dyn. lib.)
880# for a list of binaries
881#
[747]882LocateDeps() {
883    local incoming fname deps
[1724]884    incoming="$*"
[3231]885    deps=""
886
[747]887    for fname in $incoming ; do
888        if [ ! -e "$fname" ] ; then
[3661]889            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
[747]890            if echo $fname | grep lvm &> /dev/null ; then
[2963]891                LogFile "          This warning only affects you if you are using LVM."
[1399]892                if echo "$MODULES" | grep lvm &> /dev/null ; then
[3231]893                    LogFile "          I think you are, so please take heed!"
[747]894                else
[3231]895                    LogFile "          I don't think you are, so don't worry about it."
[747]896                fi
897            fi
898        else
[3231]899            deps="$deps $fname" 
[747]900        fi
901    done
[3692]902    mr-read-all-link `mr-process-ldd $deps | sort -u` $deps | sort -u
[747]903}
904
[925]905
[747]906LocateFile() {
[3692]907    local j dn newdn bn path fname_to_find output
[747]908    fname_to_find="$1"
[1526]909    # It's an absolute path
[3231]910    j=`echo "$fname_to_find" | cut -c1`
911    if [ _"$j" = _"/" ]; then
912        dn=`dirname $fname_to_find`
913        # We suppose that the link is already included, just add the new file
914        if [ -h "$dn" ]; then
915            newdn=`readlink -f $dn`
916            bn=`basename $fname_to_find`
917            output="$newdn/$bn"
918        else
919            output="$fname_to_find"
920        fi
[860]921        if [ -h "$output" ] ; then
[3231]922            output="`mr-read-all-link $output` $output"
[860]923        fi
[859]924        echo "$output"
925        return 0
[747]926    fi
[1526]927    # It's not an absolute path
[747]928    output=""
[1526]929    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
930    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
931        [ -h "$path" ] && continue
932        [ ! -e "$path/$fname_to_find" ] && continue
933        output="$path/$fname_to_find $output"
934        if [ -h "$path/$fname_to_find" ] ; then
[3231]935            output="`mr-read-all-link $path/$fname_to_find` $output"
[1526]936        fi
[747]937    done
938    if [ "$output" = "" ] ; then
[860]939        return 1
[747]940    fi
941    echo "$output"
942    return 0
943}
944
[3149]945LogProgress() {
[3293]946    local i progress modres noof_lines title
[3149]947 
948    progress=$1
949    noof_lines=$2
[3293]950    title=$3
[747]951
[3149]952    i=$(($progress*100))
953    if [ $noof_lines -ne 0 ]; then
954        i=$(($i/$noof_lines))
955    else
956        i=0
957    fi
[3293]958
959    if [ _"$MONDO_SHARE" != _"" ]; then 
960        echo "$title        $i%"
961    else
962        echo -en "\r\t\t\t\t\t\t\t\t"
963        echo -en "$i"
964        echo -en "%"
965        modres=$(($progress%4))
966        [ "$modres" -eq "0" ] && echo -en "\t/"
967        [ "$modres" -eq "1" ] && echo -en "\t-"
968        [ "$modres" -eq "2" ] && echo -en "\t\\"
969        [ "$modres" -eq "3" ] && echo -en "\t|"
970    fi
[3149]971}
972
[3692]973# Called by PrepareTargetDir, to make /tmp/$MRCFG
[747]974MakeMondoConfigFile() {
[3692]975    local outfile use_lzo use_comp use_star use_gzip use_lzma
[747]976    outfile=$1
977    > $outfile
978    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
979    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
[1698]980    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
[747]981    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
982    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
983    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
984    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
[998]985    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
[3149]986    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
[747]987    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
988    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
989    echo "use-lzo $use_lzo" >> $outfile
[998]990    echo "use-gzip $use_gzip" >> $outfile
[747]991    echo "use-star $use_star" >> $outfile
[3149]992    echo "use-lzma $use_lzma" >> $outfile
[747]993    echo "use-comp $use_comp" >> $outfile
[3397]994    echo "boot-type $BOOT_TYPE" >> $outfile
[747]995    echo "datestamp `date`" >> $outfile
996    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
[940]997    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
998    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
[3278]1000    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
[940]1001    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
[3278]1003    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
[940]1004    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
[3278]1007    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1010
[3270]1011    # Deal with network configuration in a portable way
1012    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1013        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
[3705]1014        if [ $? -ne 0 ]; then
1015            Die "mr-net-get-config didn't execute correctly. Check dependencies, probably the perl Net::IPv4Addr module is missing"
1016        fi
[3270]1017    fi
[747]1018}
1019
[2618]1020# Get PV's for an LV
1021GetPVsForLV() {
[3692]1022    local vg
1023
[3368]1024    if [ -n "$1" ]; then
1025        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1026        if [ -z "$vg" ]; then
1027            return
1028        fi
1029        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1030    fi
[2618]1031}
[747]1032
[2618]1033
[747]1034MakeMountlist() {
[2907]1035    local mountlist all_partitions current_partition \
[747]1036partition_size partition_format outstring partition_number \
1037partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
[2013]1038absolute_partition old_partition_fmt current_lvolume uname skip
[747]1039
[3149]1040    LogFile "------------------------------------"
[3522]1041    LogFile "INFO: Your raw fstab file looks like this:"
[2963]1042    LogFile "------------------------------------"
[747]1043    cat $MY_FSTAB >> $LOGFILE
[3149]1044    LogAll "-----------------------------------"
[3522]1045    LogAll "INFO: Your mountlist will look like this:"
[3149]1046    LogAll "-----------------------------------"
[747]1047
[2907]1048# mountlist(OUT)
[747]1049    mountlist=$1
1050
1051# NB: partition = device
1052# NB: mountpt = where the device is mounted
1053
1054    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1055
[3565]1056    [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
[747]1057    > $mountlist
1058    all_partitions=""
1059   
1060    if [ $LVM != "false" ]; then
[3499]1061        LogFile "INFO: Analyzing LVM..."
[968]1062        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
[971]1063        if [ $? -ne 0 ]; then
[963]1064            LVM="false"
1065        fi
[2536]1066        # Excluded LVs and GVs are not reported here
[2424]1067        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
[747]1068    fi
1069    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1070    for i in $IMAGE_DEVS ; do
1071        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1072    done
1073    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
[3149]1074    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1075    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
[3028]1076    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
[747]1077    for c_p in $all_partitions ; do
[3702]1078        # Skip fd/cd devices, network FS, cifs, brtfs subvols
[2452]1079        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
[747]1080        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1081        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
[861]1082            current_partition=`readlink -f $c_p`
[3046]1083            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1084                current_partition="$c_p"
1085            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
[3059]1086                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
[3066]1087                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
[3046]1088            fi
[747]1089            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1090        else
1091            current_partition="$c_p"
1092        fi
1093        [ "$c_p" = "none" ] && continue
[3702]1094
[747]1095        redhat_label=""
[1831]1096        label=""
[957]1097        uuid=""
[861]1098        absolute_partition=`readlink -f $c_p`
[2965]1099        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
[747]1100
[1986]1101        # set default in case we dont't find it
1102        str_to_find_fmt_with=$current_partition
1103
[747]1104        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1105        # current_partition contains only first column of /etc/fstab
[2965]1106        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
[980]1107            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
[747]1108            actual_dev=""
[853]1109
1110            # 1st try, findfs - the RHEL way of finding labels and their partitions
1111            if [ -x "/sbin/findfs" ]; then
[2847]1112                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
[853]1113            fi
[747]1114   
[853]1115            # 2nd try : blkid, the good way for all LABEL except swap
1116            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]1117                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
[747]1118                # For LVM FS it will give a /dev/dm-# which should then be converted
[748]1119                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
[963]1120                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1121                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
[747]1122                    for dev in `ls /dev/mapper/*`; do
[963]1123                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1124                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
[747]1125                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]1126                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
[747]1127                            break
1128                        fi
1129                    done
1130                fi
1131            fi
1132   
[853]1133            # 3rd try, which works on a standard partition (ext2/3), but not on swap
[747]1134            # For LVM gives a /dev/mapper entry
1135            if [ "x$actual_dev" = "x" ]; then
[2965]1136                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
[747]1137            fi
1138   
[853]1139            # 4th try, with vol_id
[747]1140            # SWAP only
1141            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]1142                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
[747]1143                for dev_swap in $list_swaps ; do
[2965]1144                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
[747]1145                    if [ "x$dev_exists" != "x" ]; then
1146                        actual_dev=$dev_swap
1147                        break;
1148                    fi
1149                done
1150            fi
1151
[853]1152            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
[789]1153            # LABEL=SW-cciss/c0d0p3 (RDP)
[853]1154            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
[747]1155            # SWAP only
[2965]1156            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
[2013]1157                    skip=""
[2292]1158                    uname=$KERVERRUN
[2013]1159                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1160                    # 2.6.12 needs 16 (FC3)
1161                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1162                    # 2.6.19 and upper needs 1052
1163                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1164                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
[2892]1165                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
[2013]1166                    if [ $skip = "" ]; then
1167                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1168                    fi
[853]1169                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1170                    do
1171                        # Location of the swap label for kernel 2.6
[2013]1172                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
[853]1173                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
[855]1174                            actual_dev=$try_dev
[853]1175                        fi
1176                    done
[747]1177            fi
[1008]1178
1179            # Check if one of all those tries has known success
1180            if [ "x$actual_dev" != "x" ]; then
1181                current_partition=$actual_dev
1182            else
[1885]1183                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
[1008]1184            fi
[957]1185        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1186        # current_partition contains only first column of /etc/fstab
[2965]1187        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
[980]1188            uuid=`echo "$current_partition" | cut -d'=' -f2`
[957]1189            actual_dev=""
1190
1191            # 1st try, findfs - the RHEL way of finding labels and their partitions
1192            if [ -x "/sbin/findfs" ]; then
1193                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1194            fi
1195   
[1531]1196            # 2nd try : blkid, the good way for all UUID except swap
[957]1197            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
[2965]1198                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
[957]1199                # For LVM FS it will give a /dev/dm-# which should then be converted
1200                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
[963]1201                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1202                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
[957]1203                    for dev in `ls /dev/mapper/*`; do
[963]1204                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1205                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
[957]1206                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
[963]1207                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
[957]1208                            break
1209                        fi
1210                    done
1211                fi
1212            fi
1213   
1214            # 3th try, with vol_id
1215            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
[2965]1216                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
[957]1217                for dev in $list_dev ; do
[2965]1218                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
[957]1219                    if [ "x$dev_exists" != "x" ]; then
1220                        actual_dev=$dev
1221                        break;
1222                    fi
1223                done
1224            fi
1225
[1531]1226            # 4th try, with dumpuuid (VMWare only ?) for swap
1227            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
[2965]1228                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
[1531]1229                for dev in $list_dev ; do
[2965]1230                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
[1531]1231                    if [ "x$dev_exists" != "x" ]; then
1232                        actual_dev=$dev
1233                        break;
1234                    fi
1235                done
1236            fi
1237
[747]1238            # Check if one of all those tries has known success
1239            if [ "x$actual_dev" != "x" ]; then
1240                current_partition=$actual_dev
1241            else
[2069]1242                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
[747]1243            fi
1244        else
[1863]1245            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1246            # they use symlinks in fstab unrelated to what is shown in mount !
1247            if [ _"$partition_mountpt" = _"" ]; then
[1986]1248                # set default in case we dont't find it
[2965]1249                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
[3084]1250                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
[1863]1251                            str_to_find_fmt_with=$tmpp
[2965]1252                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
[1864]1253                            break;
[1863]1254                        fi
1255                done
1256            fi
[747]1257        fi
1258
[3702]1259        # Avoid analyzing btrfs subvol partitions
1260        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | grep -v 'subvol=' | head -n1`
[3084]1261        # Detects noauto partitions not mounted and exclude them
1262        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
[3702]1263            LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
[3084]1264            continue
1265        fi
1266        # Detects bind partitions and exclude them
1267        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
[3702]1268            LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
[3084]1269            continue
1270        fi
1271
[2566]1272        # Look for devices which have to be excluded
1273        skip=0
1274        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
[2568]1275            l=""
[3231]1276            list_of_devices="`mr-read-all-link $current_partition`"
[2568]1277            for d in $list_of_devices; do
[2579]1278                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
[2568]1279            done
[2618]1280
1281            # Remove PVs from LVs excluded
1282            l="$l `GetPVsForLV $current_partition`"
1283
1284            # We want a single unique list
[3522]1285            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
[2618]1286
[2854]1287            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
[2568]1288                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
[2963]1289                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
[2566]1290                    skip=1
1291                    continue
1292                fi
1293            done
1294        fi
1295        if [ $skip -eq 1 ]; then
1296            continue
1297        fi
1298
[3702]1299        # sort in case of btrfs subvol
1300        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB | sort -u`
[3028]1301        # Detects iso9660 ISO images and exclude them
1302        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
[3064]1303                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
[3028]1304            continue
1305        fi
[747]1306        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1307        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1308        # the former is then a link to the latter, so we test whether
1309        # $current_partition is actually such a link or not and set
[755]1310        # $current_lvolume accordingly. On Debian you may find more than one answer
1311        # so we remove the one corresponding to /dev/.static
1312        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1313        # principle is the same and we need to find the link to it as well.
1314        # Note that $current_lvolume may well be an
[747]1315        # ordinary device. It is just to make sure that we feed the right value
1316        # into any of the LVM tools if possible.
1317
[3064]1318        current_lvolume="$current_partition"
[763]1319        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
[755]1320            # .static dir are a Debian specificity
[763]1321            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
[755]1322            echo $current_lvolume | grep -q ' '
[784]1323            if [ $? -eq 0 ]; then
[2963]1324                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
[755]1325            fi
[2072]1326            # if it's not found, it may well be a real device such as a multipath one
1327            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1328            if [ _"$current_lvolume" = _"" ]; then
1329                current_lvolume="$current_partition"
1330            fi
[747]1331        fi
1332        #
1333        # End of LVM device style variation code (other than $current_lvolume).
1334
[745]1335        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1336            # Size computed via LVM not directly
[747]1337            partition_size="lvm"
1338        else
1339            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1340            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1341            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
[2947]1342                # Skip swap files
1343                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
[2919]1344                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
[747]1345                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
[3368]1346                [ "$partition_format" != "swap" ] && partition_format="swap"
[747]1347                if [ "$partition_size" = "" ] ; then
[3368]1348                    totalsize=0
1349                    items=0
1350                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
[747]1351                        totalsize=$(($totalsize+$i))
1352                        items=$(($items+1))
[3368]1353                    done
1354                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1355                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1356                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
[747]1357                fi
[2947]1358            else
1359                partition_size=`SizeOfPartition $current_partition`
[747]1360            fi
1361        fi
1362        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1363        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1364        if [ "$partition_mountpt" = "" ] ; then
1365            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1366                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1367                    partition_mountpt="raid"
1368                    partition_format="raid"
1369                else
1370                    partition_mountpt="lvm"
1371                    partition_format="lvm"
1372                fi
1373            fi
1374        fi
1375        psz=$partition_size
[2963]1376        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
[747]1377        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1378        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1379            partition_mountpt="image"
1380            old_partition_fmt=$partition_format
1381            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1382            partition_size=$(($partition_size+1)); # just in case
1383            if [ "$partition_format" = "Linux" ] ; then
[2963]1384                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1385                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
[747]1386                partition_format=$old_partition_fmt
1387            fi
1388        fi
[2566]1389
[747]1390        if [ ! "$partition_mountpt" ] ; then
[2963]1391            LogFile "------- $FDISK -l $qq log ------------"
[1883]1392            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
[747]1393                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1394                [ "$partition_format" ] && break
1395            done
[2963]1396            LogFile "------- $FDISK log end ------------"
[747]1397            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1398                partition_format="compaq"
1399            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
[3149]1400                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
[747]1401                continue
1402            fi
1403        fi
[1755]1404        if [ "$redhat_label" ]; then
1405            label="$redhat_label"
[1756]1406        elif [ "$uuid" ]; then
[1755]1407            label="$uuid"
1408        fi
[3330]1409
1410        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1411        # in order to mount the root part e.g. in grub.
1412        # One way to solve this is to add the UUID now, if there wasn't one so it's
1413        # restored correctly
1414        if [ _"$label" = _"" ]; then
1415            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1416        fi
1417
[747]1418        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
[963]1419        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
[3149]1420        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
[747]1421        if [ "$current_partition" = "" ] ; then
[2963]1422            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
[747]1423        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1424            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1425                partition_mountpt=raid
1426                partition_format=raid
[3149]1427                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
[1755]1428                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]1429            else
[2963]1430                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
[747]1431            fi
1432        elif [ "$partition_format" = "" ] ; then
[2963]1433            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
[747]1434        elif [ "$partition_size" = "" ] ; then
[2963]1435            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
[747]1436        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1437            continue
1438        else
1439            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
[3522]1440            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
[747]1441                partition_format="vfat"
1442            fi
[3149]1443            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
[1755]1444            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
[747]1445        fi
1446    done
[3149]1447    LogAll "-----------------------------------" 
[747]1448}
1449
[2432]1450CheckMountlist() {
1451    local file=$1
1452    # Coherency verification
[2529]1453    ML01=`cat $file | wc -l`
[2995]1454    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
[2432]1455    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
[3024]1456    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
[2529]1457    if [ "$ML01" -ne "$ML1" ]; then
[2963]1458        LogFile "--------------------------------------------"
[3081]1459        LogAll "WARNING: Duplicate device entry in mountlist"
[2963]1460        LogFile "--------------------------------------------"
[2432]1461    fi
[2529]1462    if [ "$ML02" -ne "$ML2" ]; then
[2963]1463        LogFile "--------------------------------------------"
1464        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1465        LogFile "------------------------------------------------"
[2432]1466    fi
1467}
[747]1468
[3476]1469
[3522]1470MakeISOErrors() {
[3421]1471
[3522]1472LogFile "----------- $ISO_CMD's errors --------------"
[3596]1473LogAll "Command invoked: $CMD ."
[3522]1474LogAll "$ISO_CMD returned the following errors:"
1475cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1476LogAll "ERROR: Failed to create ISO image."
1477}
[3499]1478
[3532]1479MakeISO() {
1480
[3596]1481LogAll "INFO: Generating ISO image."
[3608]1482LOCISO=`echo $CMD | perl -p -e 's|.* -o (.+)/mindi.iso .*|$1|'`
[3532]1483(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1484if [ $? -ne 0 ] ; then
[3596]1485    # In case of UEFI handle differences in option handling
[3532]1486    if [ "$BOOT_TYPE" = "UEFI" ]; then
1487        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1488        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
[3596]1489        if [ $? -ne 0 ] ; then
1490            # xorriso e.g.
1491            CMD=`echo $CMD | perl -p -e 's|-eltorito-platform 0xEF ||'`
1492            (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1493            if [ $? -eq 0 ] ; then
1494                LogAll "INFO: Invoking $CMD ."
[3608]1495                LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3596]1496            else
1497                MakeISOErrors
[3599]1498            fi
[3596]1499        else
1500            LogAll "INFO: Invoking $CMD ."
[3608]1501            LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]1502        fi
1503    else
1504        MakeISOErrors
1505    fi
1506else
[3596]1507    LogAll "INFO: Invoking $CMD ."
[3608]1508    LogAll "INFO: Created bootable ISO image at $LOCISO/mindi.iso"
[3532]1509fi
1510rm -f $MINDI_TMP/mkisofs.log
1511}
1512
[3522]1513MakeBootableDevice() {
[3499]1514
[3522]1515local target tbc retval part size mount_opt
1516
1517target="$1"
1518
1519rm -Rf $MINDI_TMP/target
1520mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1521
1522LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1523cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1524for i in memdisk memtest.bin memtest.img ; do
1525    j=$MINDI_LIB/$i
1526    k=$MINDI_TMP/target
1527    if [ -e "$j" ] ; then
1528        LogAll "INFO: Copying $j to $k"
1529        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1530        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1531        if [ _"$MONDO_SHARE" != _"" ]; then 
1532            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
[3499]1533        fi
[3522]1534    fi
1535done
[3499]1536
[3522]1537retval=0
1538LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1539cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
[3528]1540if [ $? -ne 0 ] ; then
[3522]1541    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1542    retval=$(($retval+1))
1543fi
1544LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1545cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
[3528]1546if [ $? -ne 0 ] ; then
[3522]1547    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1548    retval=$(($retval+1))
1549fi
[3421]1550
[3692]1551# copy boot stuff now generated in PrepareBigDir
[3522]1552if [ "$BOOT_TYPE" = "UEFI" ]; then
1553    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1554    tbc="EFI"
[3528]1555    # Also prepare a BIOS compatible boot
1556    if  [ "$target" = "ISO" ]; then
1557        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1558    fi
[3522]1559else
1560    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1561    tbc="syslinux"
1562    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1563        LogFile "----------- syslinux's conf --------------"
1564        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1565        LogFile "------------------------------------------"
1566    fi
1567    if  [ "$target" = "ISO" ]; then
1568        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
[3528]1569        if [ $? -ne 0 ] ; then
[3522]1570            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1571            retval=$(($retval+1))
[3476]1572        fi
[3522]1573    fi
1574fi
[3476]1575
[3522]1576if [ "$ARCH" != "ia64" ] ; then
1577    if [ $KERNEL_IS_XEN = "yes" ]; then
1578        FindMboot32Binary
1579        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
[3528]1580        if [ $? -ne 0 ] ; then
[3522]1581            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1582            retval=$(($retval+1))
[1885]1583        fi
[3522]1584        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
[3528]1585        if [ $? -ne 0 ] ; then
[3522]1586            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1587            retval=$(($retval+1))
1588        fi
[747]1589    fi
[3522]1590fi
[3499]1591
[3522]1592MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1593
1594if [ _"$MONDO_SHARE" != _"" ]; then 
1595    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
[3528]1596    if [ $? -ne 0 ] ; then
[3522]1597        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1598        LogAll "       Please check the target directory."
1599        retval=$(($retval+1))
1600    fi
1601    if [ $KERNEL_IS_XEN = "yes" ]; then
1602        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
[3528]1603        if [ $? -ne 0 ] ; then
[3522]1604            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1605            LogAll "       Please check the target directory."
1606            retval=$(($retval+1))
[3476]1607        fi
[747]1608    fi
[3522]1609    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
[3527]1610    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
[3528]1611    if [ $? -ne 0 ] ; then
[3527]1612        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1613        LogAll "       Please check the target directory."
1614        retval=$(($retval+1))
1615    fi
1616    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
[3528]1617    if [ $? -ne 0 ] ; then
[3527]1618        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1619        LogAll "       Please check the target directory."
1620        retval=$(($retval+1))
1621    fi
[3522]1622fi
[747]1623
[3522]1624if [ -f "$MINDI_TMP/$MRCFG" ]; then
1625    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1626fi
[747]1627
[3522]1628LogFile "----------- target dir content -----------"
1629LogFile "------------------------------------------"
1630ls -lR $MINDI_TMP/target >> $LOGFILE
1631LogFile "------------------------------------------"
1632LogFile "----------- target dir sizes -------------"
1633du -sk $MINDI_TMP/target/* >> $LOGFILE
1634LogFile "------------------------------------------"
[3692]1635LogFile "Kernel size = `du -sk $kernelpath | cut -f1` K"
1636LogFile "--------------------------------"
[3476]1637
[3522]1638if [ "$retval" -ne "0" ] ; then
[3546]1639    sync
[3522]1640    umount $MINDI_TMP/target
1641    LogAll "ERROR: Problems while creating boot media."
1642    LogAll "       Please unload some of your modules and try again."
[3692]1643    Die    "       Try using another temporary directory instead of $MINDI_TMP"
[3522]1644fi
[3476]1645
[3522]1646mkdir -p $MINDI_TMP/mpt
[1684]1647
[3522]1648if  [ "$target" = "USB" ]; then
1649    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1650    LogAll "INFO: Checking $USBDEVICE"
[2924]1651    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
[1684]1652    if [ $? -ne 0 ]; then
[2963]1653        LogAll "ERROR: Unable to access $USBDEVICE"
[3086]1654        LogAll "       Make sure your USB device is plugged in"
[2963]1655        MindiExit -1
[1684]1656    fi
[3149]1657    # Some distro do auto mount at that point (Ubuntu)
[3522]1658    LogAll "INFO: Unmounting $USBPART just in case"
[3546]1659    sync
[1721]1660    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3419]1661    if [ "$BOOT_TYPE" = "BIOS" ]; then
[3403]1662        # If your key has no MBR it may cause an issue
1663        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1664        if [ -r $MBRFILE ]; then
1665            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
[3522]1666            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
[3403]1667        else
1668            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1669            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1670        fi
[2855]1671    fi
[3522]1672    LogAll "INFO: Preparing $USBDEVICE"
[2851]1673    cat > $MINDI_TMP/fdisk.txt << EOF
[2057]1674d
1675d
1676d
1677d
[1684]1678n
1679p
16801
1681
1682
1683t
1684b
1685a
16861
1687w
1688EOF
[2851]1689    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
[1684]1690    if [ $? -ne 0 ]; then
[2963]1691        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
[3086]1692        LogAll "       Make sure your USB device is plugged in"
[1684]1693        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1694        MindiExit -1
1695    fi
[2963]1696    LogFile "fdisk build file"
1697    LogFile "----------------"
[2851]1698    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
[2963]1699    LogFile "----------------"
[2924]1700    rm -f $MINDI_TMP/fdisk.txt
[3522]1701    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
[2190]1702    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
[3006]1703    # Calling kpartx in case devices were not created
[3033]1704    if [ -x "/sbin/kpartx" ]; then
[3027]1705        /sbin/kpartx -a $USBDEVICE
1706    fi
[2461]1707    # Some distro do auto mount at that point (Ubuntu)
[3522]1708    LogAll "INFO: Unmounting $USBPART just in case again"
[3546]1709    sync
[2461]1710    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
[3086]1711    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1712    if [ "`which dmsetup`" != "" ]; then
[3368]1713        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1714        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
[3522]1715            LogAll "INFO: Removing $block_id from device mapper."
[3368]1716            sleep 1
1717            dmsetup remove $block_id
1718        fi
1719    fi
[3522]1720    part=$USBPART
1721    mount_opt=""
1722else
1723    # ISO image
1724    part=$MINDI_TMP/mindi-bootroot.img
1725    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1726    # Adds 10 MB to allow for additional space
1727    size=$(($size+10000))
1728    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1729    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1730    mount_opt="-o loop"
1731fi
1732
1733LogAll "INFO: Creating a vfat filesystem on $part"
[3531]1734
1735mkfs.vfat $part 2>&1 >> $LOGFILE
[3522]1736if [ $? -ne 0 ]; then
1737    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1738    if  [ "$target" = "USB" ]; then
1739        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
[1684]1740        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1741    fi
[3522]1742    MindiExit -1
1743fi
[3532]1744if  [ "$target" = "ISO" ]; then
1745    if [ "$BOOT_TYPE" = "BIOS" ]; then
1746        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1747        # and run after the formating for versions > 6 it seems
1748        syslinux $part >> $LOGFILE 2>> $LOGFILE
1749    fi
1750fi
[3522]1751LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1752mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1753if [ $? -ne 0 ]; then
1754    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1755    if  [ "$target" = "USB" ]; then
1756        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
[1684]1757        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1758    fi
[3522]1759    MindiExit -1
1760fi
1761
1762LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1763mv $MINDI_TMP/target/* $MINDI_TMP/mpt
[3528]1764if [ $? -ne 0 ] ; then
[3522]1765    LogFile "--------------------------------"
1766    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1767    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1768    LogFile "--------------------------------"
[3546]1769    sync
[3522]1770    umount $MINDI_TMP/mpt
1771    LogAll "ERROR: Problems while creating boot media."
1772    LogAll "       Please unload some of your modules and try again."
[3692]1773    Die    "       Try using another temporary directory instead of $MINDI_TMP"
[3522]1774fi
1775
1776if  [ "$target" = "ISO" ]; then
[3534]1777    if [ "$ARCH" != "ia64" ]; then
1778        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1779    fi
[3522]1780    # ISO
[3533]1781    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3534]1782        CMD="$ISO_CMD $ISO_OPT"
[3532]1783        MakeISO
[3522]1784    else
[3534]1785        if [ "$ARCH" = "ia64" ]; then
1786            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1787        else
1788            # UEFI
1789            echo "$CMD" | grep -q "xorriso"
1790            if [ $? -eq 0 ]; then
[3598]1791                XOV=`xorriso --version 2>&1 | head -1 | awk '{print $3}'`
1792                XOVMAJ=`echo $XOV | cut -d. -f1`
1793                XOVMIN=`echo $XOV | cut -d. -f2`
1794                if [ $XOVMAJ -ge 1 && $XOVMIN -ge 3 ]; then
1795                    CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
1796                else
1797                    CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img"
1798                fi
[3534]1799            else
1800                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1801            fi
1802        fi
[3522]1803    fi
1804fi
1805
[3546]1806# Avoids graphical tool to keep the FS mounted
1807sync
[3522]1808umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1809
1810if  [ "$target" = "ISO" ]; then
[3532]1811    cp $part $MINDI_CACHE
[3533]1812    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
[3692]1813        # Mount again !
1814        LogAll "INFO: Re-Mounting $part on $MINDI_TMP/mpt"
1815        mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
[3535]1816        # We just need the EFI dir and the boot image for this case
[3536]1817        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
[3535]1818        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1819        # We need again the kernel+initrd at the root for UEFI boot at least
1820        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1821        # We need the boot image now and what mindi needs at restore time as well
1822        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
[3546]1823        # Avoids graphical tool to keep the FS mounted
1824        sync
[3535]1825        umount $MINDI_TMP/mpt2
1826        LogFile "----------- target dir content -----------"
1827        LogFile "------------------------------------------"
1828        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1829        LogFile "------------------------------------------"
[3532]1830        MakeISO
[3522]1831    fi
1832else
1833    # USB
[1684]1834    if [ "$ARCH" != "ia64" ] ; then
[2939]1835        syslinux -v 2>&1 | grep -q 4.02
1836        if [ $? -eq 0 ]; then
1837            # This buggy version of syslinux requires a call to --stupid and not -s
1838            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1839            res=$?
1840        else
1841            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1842            res=$?
1843        fi
1844        if [ $res -ne 0 ] ; then
[2963]1845            LogAll "----------- syslinux's errors --------------"
[1684]1846            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
[2963]1847            LogAll "------------------------------------------"
[3565]1848            LogAll "ERROR: Failed to create USB image."
[1684]1849        else
[2963]1850            LogFile "INFO: Created bootable USB image on $USBDEVICE"
[1684]1851        fi
1852        rm -f $MINDI_TMP/syslinux.log
1853    else
[2963]1854        LogAll "ERROR: No USB boot support for ia64"
[1684]1855        MindiExit -1
1856    fi
[3522]1857fi
[1684]1858}
1859
1860
[3522]1861OfferToMakeBootableUSB() {
1862
1863local i files
1864
1865if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1866    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1867    read i
1868    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1869    if [ "$USBDEVICE" = "" ]; then
1870        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1871        read dev
1872        USBDEVICE=$dev
1873    fi
1874    echo "WARNING: This will erase all content on $USBDEVICE"
1875    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1876    read i
1877    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1878else
1879    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1880        Die "No USBDEVICE environment variable declared, aborting"
1881    fi
1882fi
1883USBPART="${USBDEVICE}1"
1884
1885MakeBootableDevice USB
1886}
1887
1888
1889OfferToMakeBootableISO() {
1890
1891local i files
1892
1893if [ -z "$ISO_CMD" ]; then
1894    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1895    return
1896fi
1897
1898if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1899    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1900    read i
1901    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1902fi
1903
1904MakeBootableDevice ISO
1905}
1906
1907
[747]1908MakeMessageFile() {
[2292]1909   
1910    if [ -x "/bin/lsb_release" ]; then
1911        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
[3173]1912    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1913        DESC="Arch Linux"
1914        if [ -r /var/log/pacman.log ]; then
1915            # there are no releases but we can get the last system upgrade
1916            # Output example:   Arch Linux [2011-03-03 01:39]
1917            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
[2754]1918        fi
[3426]1919    elif [ -x "/etc/os-release" ]; then
1920        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1921    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1922        # For pb >= 0.9.8
1923        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
[2732]1924    elif [ -r /etc/issue.net ]; then
[2731]1925        DESC=`head -1 /etc/issue.net`
[2732]1926    elif [ -r /etc/issue ]; then
[2731]1927        DESC=`head -1 /etc/issue`
[747]1928    else
[2731]1929        DESC="Unknown desc"
[747]1930    fi
[2292]1931    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
[1885]1932    if [ _"$MONDO_SHARE" != _"" ]; then
1933        if [ "$CDRECOVERY" != "yes" ] ; then
[3270]1934            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3281]1935                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
[3278]1936                echo -en "$BOOT_MEDIA_MESSAGE"
[1885]1937            elif [ ! "$MINDI_TMP" ] ; then
[3522]1938                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1939                if [ -e "$MINDI_LIB/memtest.img" ] ; then
[3653]1940                    echo -en "Type 'memtest' <Enter> to test your machine's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
[3522]1941                fi
[1885]1942            else
1943                echo -en "$BOOT_MEDIA_MESSAGE"
[747]1944            fi
[1983]1945        else
1946            echo -en "\
[747]1947To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1948CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
[1983]1949        fi
[747]1950    fi
[3173]1951
1952    # Also create the other help screens
1953    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1954    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1955    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
[747]1956}
1957
1958
[1983]1959MakeBootConfFile() {
[1885]1960    local options i ooo
[747]1961    options=""
[1983]1962    # Type of boot file (elilo or syslinux/isolinux)
1963    type=$1
[3588]1964    if [ "$type" = "elilo" ] || [ "$type" = "grub2" ]; then
[1983]1965        sep="="
[3398]1966        sepdef="="
[1983]1967    else
1968        sep=" "
[3398]1969        sepdef=" "
[1983]1970    fi
[925]1971
[1983]1972    # Generic header for conf file
[3398]1973    if [ "$type" = "elilo" ]; then
1974        echo -en "prompt\n"
1975    elif [ "$type" = "grub" ]; then
1976        echo -en "pause Press a key when ready to restore\n"
[3518]1977    elif [ "$type" = "grub2" ]; then
1978        echo -en "set "
[3398]1979    else
[3535]1980        # syslinux family
[3173]1981        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
[925]1982    fi
[1983]1983
1984    # Compute which default option to boot from
[3398]1985    echo -en "default${sepdef}"
[747]1986    if [ "$CDRECOVERY" = "yes" ] ; then
[3398]1987        if [ "$type" = "grub" ]; then
[3430]1988            # TODO: Which num ???
[3398]1989            echo -en "0\n"
1990        else
1991            echo -en "RESTORE\n"
1992        fi
[1983]1993    # In case it's mondoarchive
[1885]1994    elif [ _"$MONDO_SHARE" != _"" ]; then
[3270]1995        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[3398]1996            if [ "$type" = "grub" ]; then
1997                echo -en "3\n"
1998            else
1999                echo -en "iso\n"
2000            fi
[747]2001        else
[3398]2002            if [ "$type" = "grub" ]; then
2003                echo -en "1\n"
2004            else
2005                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
2006            fi
[747]2007        fi
2008    else
[3398]2009        if [ "$type" = "grub" ]; then
2010            echo -en "0\n"
2011        else
2012            echo -en "expert\n"
2013        fi
[747]2014    fi
2015
[1983]2016    # Handle timeout
[3588]2017    if [ "$type" = "grub2" ]; then
2018        seppref="set "
2019    else
2020        seppref=""
[3518]2021    fi
[3587]2022    if [ "$CDRECOVERY" = "yes" ] ; then
[3588]2023        echo -en "${seppref}timeout${sep}10000\n"
[3587]2024    else
[3588]2025        echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
[747]2026    fi
2027    echo -en "\n"
[1983]2028
[2124]2029    # prepare which labels will be generated
[747]2030    if [ "$CDRECOVERY" = "yes" ] ; then
[925]2031        options="RESTORE expert"
[1885]2032    else
2033        if [ _"$MONDO_SHARE" != _"" ]; then
[2344]2034            options="interactive expert compare iso nuke isonuke"
[747]2035        else
2036            options="expert"
[925]2037        fi
[747]2038    fi
[1983]2039
2040    # Generate rest of conf file
[747]2041    for i in $options ; do
[925]2042        ooo=$i
[3111]2043        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
[1983]2044        if [ "$type" = "elilo" ]; then
[3692]2045            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=RAMDISK_SIZE $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
[3398]2046        elif [ "$type" = "grub" ]; then
[3692]2047            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
[3518]2048        elif [ "$type" = "grub2" ]; then
[3535]2049            if [ "$BOOT_TYPE" = "UEFI" ]; then
2050                lorder="linuxefi"
2051                iorder="initrdefi"
2052            else
2053                lorder="linux"
2054                iorder="initrd"
2055            fi
[3692]2056            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
[925]2057        else
[2073]2058            ps="/"
[2629]2059            if [ $KERNEL_IS_XEN = "no" ]; then
[3692]2060                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
[2629]2061            else
[3692]2062                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=RAMDISK_SIZE  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
[2629]2063            fi
[925]2064        fi
[1885]2065        echo -en "$outstr"
[747]2066    done
[1983]2067    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2068        if [ "$type" = "elilo" ]; then
2069            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
[2073]2070            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
[3398]2071        elif [ "$type" = "grub" ]; then
[3415]2072            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
[3518]2073        elif [ "$type" = "grub2" ]; then
2074            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
[1983]2075        else
[2073]2076            ps="/"
2077            if [ "$type" = "syslinux" ]; then
2078                ps=""
2079            fi
2080            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2081            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
[1983]2082        fi
2083    fi
[747]2084}
2085
[2006]2086ParseModprobeForIncludes() {
2087local MODPROBE_CONF mpincfile includes include
2088
2089MODPROBE_CONF=/etc/modprobe.conf
2090mpincfile=$1
2091touch $mpincfile
2092if [ -a $MODPROBE_CONF ]; then
[2431]2093    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
[2006]2094    if [ -n "$includes" ]; then
2095        for include in $includes
2096        do
2097            if [ -a "$include" ]; then
2098                echo $include >> $mpincfile
2099            fi
2100        done
2101    fi
2102fi
2103}
2104
[3585]2105PrepareBootDir() {
[2006]2106
[3692]2107    local detect
2108    # Needs a bigdir variable setup before calling it
[3585]2109
2110    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2111    # to get it on the media (in addition to the boot part
2112    # and also to support UEFI boot mechanism
2113    if [ "$boottype" != "" ]; then
2114        detect="no"
2115    else
2116        detect="yes"
2117        boottype=syslinux
2118    fi
2119    bootdir=$bigdir/$boottype
2120    bootconf="$bootdir/$boottype.cfg"
2121    mkdir -p $bootdir
2122    FindLdlinux32Binary
2123
2124    if [ "$BOOT_TYPE" != "BIOS" ]; then
2125        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2126            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2127            MindiExit -1
2128        fi
2129
2130        mountefi=0
2131        # EFI or UEFI
2132        # TODO: names are hard-coded for now
2133        if [ "$BOOT_TYPE" = "UEFI" ]; then
2134            # UEFI
2135            efidir=$bigdir/EFI/BOOT
2136            # Auto-detection if needed
2137            if [ $detect = "yes" ]; then
2138
2139                # mount /boot/efi if needed
2140                df -T | grep /boot/efi | grep -qE 'vfat'
2141                if [ $? -ne 0 ]; then
2142                    mount /boot/efi
2143                    if [ $? -ne 0 ]; then
2144                        echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2145                        MindiExit -1
2146                    fi
2147                    mountefi=1
2148                fi
2149
2150                # On RHEL6 grub works
2151                dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2152                dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
[3602]2153                if [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver = "6" ]; then
[3585]2154                    boottype=grub
[3652]2155                elif [ $dname = "rhel" -o $dname = "centos" -o $dname = "oel" ] && [ $dver -ge 7 ]; then
[3585]2156                    boottype=grub2
[3652]2157                elif [ $dname = "fedora" ] && [ $dver -ge 20 ]; then
[3609]2158                    boottype=grub2
[3710]2159                elif [ $dname = "sles" ] && [ $dver -ge 12 ]; then
2160                    boottype=grub2
[3652]2161                elif [ $dname = "debian" ] && [ $dver -ge 8 ]; then
[3585]2162                    boottype=grub2
2163                else
2164                    # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2165                    boottype=syslinux
2166                fi
2167            fi
2168            if [ "$boottype" = "syslinux" ]; then
2169                if [ ! "$bootbin" ]; then
2170                    FindSyslinux64EFI
2171                    bootbin=$SYSLINUX64EFI
2172                fi
2173                bootconf="$efidir/syslinux.cfg"
2174            elif [ "$boottype" = "grub" ]; then
2175                if [ ! "$bootbin" ]; then
2176                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2177                fi
2178                bootconf="$efidir/BOOTX64.conf"
2179            elif [ "$boottype" = "grub2" ]; then
2180                if [ ! "$bootbin" ]; then
2181                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2182                fi
2183                bootconf="$efidir/grub.cfg"
2184            fi
2185
2186            # Depending on the arch, the target boot file is different
2187            if [ "$ARCH" = "x86_64" ] ; then
2188                tgbin="BOOTX64.efi"
2189            elif [ "$ARCH" = "armv8" ]; then
2190                tgbin="BOOTAA64.efi"
2191            else
2192                # i?386
2193                tgbin="BOOTIA32"
2194            fi
2195        else
2196            # EFI
2197            efidir=$bootdir
2198            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2199            tgbin=$bootbin
2200            boottype=elilo
2201            bootconf="$efidir/elilo.conf"
2202        fi
2203        LogAll "INFO: Found $boottype boot type"
2204        mkdir -p $efidir
2205        cp $bootbin $efidir/$tgbin
2206
2207        if [ $mountefi -eq 1 ]; then
2208            umount /boot/efi 2>&1 > /dev/null
2209        fi
2210
2211        if [ $boottype = "syslinux" ]; then
2212            FindLdlinuxe64Binary
2213            if [ -e "$LDLINUXE64" ]; then
2214                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2215                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2216                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
2217                if [ -e $LDLINUXE64/../isolinux.c32 ]; then
2218                    cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
2219                fi
2220            fi
2221        fi
2222        # tgdir for syslinux
2223        tgdir=$bigdir/EFI
2224    else
2225        # tgdir for syslinux
2226        tgdir=$bootdir
2227    fi
2228    # In all cases prepare syslinux content for BIOS mode
2229    # so that we can have multi boot mode media BIOS+UEFI
2230    # Useful for syslinux 5.x
2231    if [ -e "$LDLINUXC32" ]; then
2232        LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
2233        cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
2234    fi
2235    if [ -e $LDLINUXC32/../isolinux.c32 ]; then
2236        LogFile "INFO: Copying isolinux.c32 to $tgdir"
2237        cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
2238    fi
2239
2240    MakeBootConfFile $boottype > $bootconf
2241    LogFile "Boot Conf file $bootconf content is:"
2242    LogFile "------------------------------------"
2243    cat $bootconf >> $LOGFILE
2244    LogFile "------------------------------------"
2245    if [ "$BOOT_TYPE" = "UEFI" ]; then
2246        # Also generate the syslinux conf
2247        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2248        LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2249        LogFile "---------------------------------------------------"
2250        cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2251        LogFile "---------------------------------------------------"
2252    fi
2253
2254}
2255
[3692]2256PrepareBigDirTar() {
[3585]2257    echo -en "INFO: Tarring and zipping the data content..."
2258    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2259    LogFile "Size of the data content"
2260    LogFile "------------------------"
2261    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2262    LogFile "------------------------"
2263    echo -e "$DONE"
2264
2265}
2266
[3692]2267CleanBigDir() {
2268    [ "$bigdir" != "/" ] && echo $bigdir | grep -vq $MINDI_TMP && rm -rf $bigdir
2269}
[747]2270
[3692]2271PrepareBigDir() {
2272    local needlist diskdir res i j k lines lfiles includefile
2273
[3407]2274    rm -f $MINDI_CACHE/mindi.iso
[940]2275    needlist=$MINDI_TMP/what-we-need.txt
[747]2276    mkdir -p $bigdir/usr/bin
[1983]2277    mkdir -p $bigdir/usr/sbin
[2006]2278    includefile=$MINDI_TMP/$$.includefile.txt
[747]2279
[3149]2280    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
[2409]2281    if [ -e "$DEPLIST_FILE" ]; then
[3149]2282        lfiles="$DEPLIST_FILE $lfiles"
[2409]2283    fi
[1885]2284    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
[2006]2285    ParseModprobeForIncludes $includefile
[2019]2286    lines=$(($lines+`cat $includefile | wc -l`))
[2006]2287    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
[747]2288    res=$?
[2006]2289    rm -f $includefile
[3231]2290    ListKernelModulePaths >> $needlist
[747]2291    if [ "$res" -ne "0" ] ; then
[1902]2292        Die "You have $res files present in dependency list\nbut absent from filesystem."
[747]2293    fi
2294    mkdir -p $bigdir/tmp
[1885]2295    if [ _"$MONDO_SHARE" != _"" ]; then
[3430]2296        # TODO: no reason to have the cfg file stored twice
[3278]2297        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2298        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
[747]2299    fi
[3281]2300
2301    # Needs to be done after the MRCFG creation
2302    FindAndAddUserKeyboardMappingFile
2303
[3166]2304    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
[747]2305    DropOptimizedLibraries $needlist $bigdir
[3522]2306    echo -en "INFO: Assembling dependency files"
[747]2307
[3522]2308    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
[3585]2309    rm -f $needlist
[3522]2310    echo -e "$DONE"
[3149]2311
[925]2312    # also copy io.sys and msdos.sys, if we can find them
[747]2313    for i in `mount | cut -d' ' -f3` ; do
[925]2314        for j in io.sys msdos.sys ; do
[963]2315            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
[925]2316        done
[747]2317    done
2318
[925]2319    # master boot record, too
[940]2320    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
[3403]2321    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
[3149]2322        LogAll "INFO: Backing up $i's MBR"
[925]2323        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2324        sleep 1
2325        sync
2326        j=$i
2327        [ -h "$j" ] && j=`readlink -f $j`
[3149]2328        LogAll "INFO: Creating /dev/boot_device ($j)"
[925]2329        mkdir -p $bigdir/dev
[2089]2330        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
[747]2331    fi
2332
[1983]2333    # Get terminfo content
2334    ti="usr/share/terminfo/l"
2335    if [ -d /$ti ]; then
[3522]2336        mkdir -p $bigdir/$ti
2337        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
[747]2338    fi
[1764]2339    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
[3543]2340        cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
[3528]2341        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
[3543]2342        cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
[747]2343    fi
[2290]2344    if [ -d "/lib/dev-state" ]; then 
[3542]2345        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
[2290]2346    fi
[940]2347    MakeMountlist $MINDI_TMP/mountlist.txt
[2432]2348    CheckMountlist $MINDI_TMP/mountlist.txt
[1902]2349    mkdir -p $bigdir/tmp
[2092]2350    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
[1885]2351    if [ _"$MONDO_SHARE" != _"" ]; then
[1902]2352        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
[1885]2353    fi
[2032]2354    if [ $LVM != "false" ]; then
2355        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
[3528]2356        if [ $? -ne 0 ]; then
[2032]2357            LVM="false"
2358            rm -f $bigdir/tmp/i-want-my-lvm
[2552]2359        else
[2963]2360            LogFile "Your i-want-my-lvm file content is:"
2361            LogFile "-----------------------------------"
[2552]2362            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
[2963]2363            LogFile "-----------------------------------"
[2032]2364        fi
2365    fi
[3522]2366    LogFile "INFO: Your mountlist.txt file content is:"
[2963]2367    LogFile "-----------------------------------"
[1902]2368    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
[2963]2369    LogFile "-----------------------------------"
[2432]2370
[2092]2371    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2372    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
[1902]2373    if [ _"$MONDO_SHARE" != _"" ]; then
2374        for q in filelist.full.gz biggielist.txt ; do
2375            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2376            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2377        done
2378    fi
2379
[3585]2380    PrepareBootDir
[3692]2381
[747]2382}
2383
2384
2385Prompt() {
2386    echo -en "$1"
2387    read line
2388}
2389
2390
2391ReadLine() {
2392    local i incoming
2393    read incoming
2394    i=0
2395    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
[925]2396        i=$(($i+1))
2397        read incoming
[747]2398    done
2399    echo "$incoming"
2400}
2401
2402
2403SizeOfPartition() {
2404    local devpath drive res stub
2405    device=$1
[2917]2406    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2407        Die "Cannot find $device's size - is your /etc/fstab sane?"
2408    fi
[747]2409    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
[925]2410        res=`SizeOfRaidPartition $device`
2411        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2412        echo "$res"
2413        return 0
[747]2414    fi
[925]2415    # patch from Bill <bill@iwizard.biz> - 2003/08/25
[960]2416    res=`$FDISK -s $device 2>> $LOGFILE`
[925]2417    # end patch
[2448]2418    # take only the first in case of multiple mount (cifs, nfs, ...)
2419    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
[747]2420    [ "$res" = "" ] && res="-1"
2421    echo $res
2422    return 0
2423}
2424
2425
2426SizeOfRaidPartition() {
2427    local real_dev smallest_size silly tmp
2428
2429    silly=999999999
2430    smallest_size=$silly
2431
2432    for real_dev in `GetRaidDevMembers $1` ; do
[925]2433        tmp=`SizeOfPartition $real_dev`
2434        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
[747]2435    done
2436
2437    if [ "$smallest_size" = "$silly" ] ; then
[925]2438        echo "-1"
2439        return 1
[747]2440    else
[925]2441        echo "$smallest_size"
2442        return 0
[747]2443    fi
2444}
2445
2446
2447StripExecutable()
2448{
2449    local tmpfile
[925]2450
[940]2451    tmpfile=$MINDI_TMP/stripped.$$.dat
[747]2452    [ -d "$1" ] || [ -h "$1" ] && return
[963]2453    cp -f $1 $tmpfile 2>> $LOGFILE
[747]2454    strip $tmpfile 2> /dev/null
[3528]2455    if [ $? -eq 0 ] ; then
[963]2456        cp -f $tmpfile $1 2>> $LOGFILE
[2963]2457        LogFile "INFO: Stripped binary $2"
[747]2458    fi
2459    rm -f $tmpfile
2460}
2461
[2292]2462KernelVer() {
2463        local fkern_ver fname
[747]2464
[2292]2465        fname=$1
2466        file $fname | grep -q gzip
[3528]2467        if [ $? -eq 0 ] ; then
[2292]2468            # Used by ia64
[3528]2469            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]2470        else
[3528]2471            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
[2292]2472        fi
2473        echo "$fkern_ver"
2474}
2475
2476
[2880]2477# WARNING: This function should just echo the final result !!!
2478#
[747]2479TryToFindKernelPath() {
[2880]2480    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
[925]2481
[2292]2482    we_want_version=$KERVERRUN
[747]2483    possible_kernels=""
2484    duff_kernels=""
[2880]2485    output=""
[3368]2486
[747]2487    if [ "$ARCH" = "ia64" ] ; then
2488       root="/boot/efi/efi"
2489    else
2490       root="/"
2491    fi
[2681]2492    # See if we're booted from a Xen kernel
[2889]2493    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2494    if [ -f /proc/xen/capabilities ]; then
[2681]2495        # It's a Xen kernel
2496        KERNEL_IS_XEN="yes"
[2963]2497        LogFile "INFO: It's a Xen kernel..."
[2681]2498    fi
2499
[3122]2500    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
[925]2501        [ ! -e "$fname" ] && continue
[747]2502        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
[2292]2503        fkern_ver=`KernelVer $fname`
[747]2504        [ "$fkern_ver" = "" ] && continue
2505        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
[925]2506        [ -f "$fname" ] || continue
2507        [ -h "$fname" ] && continue
2508        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2509        file $fname | grep -q gzip
[3528]2510        if [ $? -eq 0 ] ; then
[925]2511            # Used by ia64
2512            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
[2880]2513                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
[925]2514                duff_kernels="$fname $duff_kernels"
2515            else
[747]2516                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2517                possible_kernels="$fname $possible_kernels"
[925]2518            fi
[747]2519        else
[925]2520            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
[2880]2521                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
[925]2522                duff_kernels="$fname $duff_kernels"
2523            else
[747]2524                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2525                possible_kernels="$fname $possible_kernels"
[925]2526            fi
[747]2527        fi
2528    done
2529    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
[3535]2530        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
[747]2531    fi
2532    if [ ! "$possible_kernels" ] ; then
[3149]2533        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
[747]2534        possible_kernels="$duff_kernels"
2535        if [ ! "$possible_kernels" ] ; then
[3149]2536            LogAll "INFO: Sorry, no duff kernels either"
[747]2537        else
[3149]2538            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2539            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
[747]2540        fi
2541    fi
[2681]2542    if [ $KERNEL_IS_XEN = "yes" ]; then
2543        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2544        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2545    fi
[2829]2546    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2547    noof_kernels=`CountItemsIn "$possible_kernels"`
[747]2548    if [ "$noof_kernels" -eq "0" ] ; then
[3149]2549        LogAll "Could not find your kernel."
[925]2550        if [ -e "/boot/vmlinuz" ] ; then
[3149]2551            LogAll "INFO: Using /boot/vmlinuz as a last resort."
[925]2552            output=/boot/vmlinuz
[747]2553        else
[925]2554            output=""
2555        fi
[747]2556    elif [ "$noof_kernels" -eq "1" ] ; then
[2880]2557        kp=`echo "$possible_kernels" | sed s/' '//`
[2963]2558        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
[2880]2559        output="$kp"
[747]2560    else
2561        for i in $possible_kernels ; do
[2880]2562            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
[3149]2563                LogAll "INFO: OK, I used my initiative and found that "
2564                LogAll "INFO: $i is probably your kernel. "
[925]2565                output="$i"
[2858]2566                break
[925]2567            fi
[747]2568        done
[2858]2569        if [ ! -n "$output" ]; then
[2880]2570            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
[2681]2571                output=/boot/vmlinuz
[2963]2572                LogFile "INFO: Schlomo, this one's for you."
[2681]2573            else
[3651]2574                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
[2963]2575                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
[3651]2576                LogFile "INFO: $possible_kernels"
2577                output=""
[2681]2578            fi
2579        fi
2580    fi
2581    if [ $KERNEL_IS_XEN = "yes" ]; then
2582        if [ "$noof_xenkernels" -eq "0" ]; then
2583            xenkernelpath=""
2584        elif [ "$noof_xenkernels" -eq "1" ]; then
2585            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
[2963]2586            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
[925]2587        else
[2681]2588            for i in $possible_xenkernels ; do
[2880]2589                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
[2963]2590                    LogFile "INFO: OK, I used my initiative and found that "
2591                    LogFile "INFO: $i is probably your Xen kernel. "
[2681]2592                    xenkernelpath="$i"
[2858]2593                    break
[2681]2594                fi
2595            done
[2858]2596            if [ ! -n "$xenkernelpath" ]; then
[2681]2597                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2598                if [ ! -n "$new_possible_xenkernels" ]; then
2599                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
[2963]2600                    LogFile "INFO: Using $xenkernelpath"
[2681]2601                else
[2963]2602                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2603                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2604                    LogFile "INFO: $possible_xenkernels"
[2880]2605                    output=""
[2681]2606                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
[2963]2607                    LogFile "INFO: Using $xenkernelpath"
[2681]2608                fi
2609            fi
[925]2610        fi
[2681]2611        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2612            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2613        fi
[747]2614    fi
[3357]2615    #LogAll "TryToFindKernelPath found $output"
[2681]2616    echo "$output"
[747]2617}
2618
[3660]2619CopyFromConf() {
[747]2620
[3660]2621    conf=$1
[3692]2622    mp=$2
[3660]2623    echo -en "INFO: Gathering dependencies of $conf.conf..."
[3692]2624    LogFile "INFO: Gathering dependencies of $conf.conf..."
[3660]2625    lis2=`grep -Ev '^#' $DEPLIST_DIR/$conf.conf | sort -u`
2626    noof_lines=`echo $lis2 | wc -w`
2627    progress=0
2628    # Get only the files which exist in that list
2629    # and potentially their symlink structure
[3661]2630    # put apart directories for later handling
[3660]2631    for f in $lis2; do
2632        if [ -d $f ]; then
[3661]2633            for g in `find $f`; do
[3660]2634                echo $g >> $MINDI_TMP/$conf.lis
2635                LocateDeps $g  >> $MINDI_TMP/$conf.lis2
2636            done
2637            lis3="$lis3 $f"
[3661]2638        else
[3660]2639            if [ -r $f ]; then
2640                echo $f >> $MINDI_TMP/$conf.lis
2641                LocateDeps $f >> $MINDI_TMP/$conf.lis2
2642            fi
2643        fi
2644        progress=$(($progress+1))
2645        LogProgress $progress $noof_lines
2646    done
2647    echo -e "$DONE"
[3692]2648    LogAll "INFO: Processing all dependencies links for $conf.conf..."
[3662]2649    # And their deps except dirs
2650    lines=`sort -u $MINDI_TMP/$conf.lis $MINDI_TMP/$conf.lis2`
2651    rm -f $MINDI_TMP/$conf.lis2
[3660]2652    finallist=""
[3662]2653    # Remove directories from the list, as cp will create them anyway
[3660]2654    # and it may hurt if /lib is in it as on Debian/Ubuntu
2655    # recent bash says that -d is true for a link to a dir !
[3662]2656    for f in $lines; do
[3660]2657        if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2658            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
[3692]2659            if [ ! -e "$mp/$f" ]; then
[3660]2660                finallist="$finallist $f"
2661            fi
2662        fi
2663    done
2664    # But adds the directory useful in $lis3
[3692]2665    fnllist=`echo $finallist $lis3 | tr ' ' '\n' | sort -u | tr '\n' ' '`
2666    LogFile "INFO: Copying $conf related files with cp -a --parents $fnllist -t $mp/"
2667    cp -a --parents $fnllist -t $mp/ 2> $templog  || LogAll "WARNING: Problem in $conf analysis" $templog
[3662]2668    rm -f $MINDI_TMP/$conf.lis
[3660]2669}
2670
[3692]2671PrepareTargetDir() {
2672    local tgz_dir_fname nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
[925]2673
[3692]2674    tgz_dir_fname=$MINDI_LIB/rootfs
2675    rdz_fname=$MINDI_TMP/initrd.img
2676    kernelsize=`du -sk $kernelpath | cut -f1`
[3403]2677    res=0 
2678    templog=$MINDI_TMP/$$.log
2679    > $templog
2680
[3692]2681    mkdir -p $targetdir
[3248]2682    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2683    for d in bin sbin lib lib64; do
2684        if [ -h "/$d" ]; then
2685            thelink=`readlink /$d`
[3692]2686            mkdir -p $targetdir/$thelink || LogAll "ERROR: Unable to create $thelink in $targetdir"
2687            mv $targetdir/$d/* $targetdir/$d/.??* $targetdir/$thelink 2> /dev/null
2688            if [ -d "$targetdir/$d" -a ! -h "$targetdir/$d" ]; then
2689                rmdir $targetdir/$d
[3248]2690            fi
[3692]2691            if [ ! -h $targetdir/$d ]; then
2692                rm -f $targetdir/$d 2> /dev/null
2693                (cd $targetdir ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $targetdir"
[3248]2694            fi
2695        fi
2696    done
[3357]2697
[3692]2698    LogFile "INFO: what is now in $targetdir"
2699    ls -al $targetdir >> $LOGFILE
[3172]2700   
[2963]2701    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
[3692]2702    # copy from rootfs into targetdir
2703    LogAll "INFO: Copying Mindi files onto $targetdir"
[3661]2704    for f in $tgz_dir_fname/*; do
[2963]2705        if [ ! -r $f ]; then
2706            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2707        else
[3692]2708            cp -af $f $targetdir 2>&1 >> $LOGFILE
[2963]2709        fi
2710    done
[3692]2711    (cd $targetdir/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2712    # kernel expects linuxrc in ext2 filesystem
2713    (cd $targetdir ; ln -sf usr/sbin/init linuxrc)
2714    # kernel expects init in cpio filesystem
2715    (cd $targetdir ; ln -sf usr/sbin/init init)
[1914]2716
[3692]2717    (cd $targetdir/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
[747]2718
2719    for w in insmod.static insmod.static.old ; do
[925]2720        s=`which $w 2> /dev/null`
2721        if [ -e "$s" ] ; then
[3692]2722            tar cf - -C / $s 2> /dev/null | (cd $targetdir ; tar xf -)
[925]2723        fi
[747]2724    done
2725
2726    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
[2951]2727   
[2438]2728    # Copy of files mandatory for ssh to automate mount if sshfs is used
[3692]2729    mkdir -p $targetdir/.ssh $targetdir/tmp
2730    cp -a ~root/.ssh/* $targetdir/.ssh 2> /dev/null
2731    cat > $targetdir/tmp/myssh << EOF
2732ssh -o StrictHostKeyChecking=no \$*
[2438]2733EOF
[3692]2734    chmod 755 $targetdir/tmp/myssh
[2438]2735
[2039]2736    # Copy of files mandatory for ld.so
[3692]2737    cp -a /etc/ld.so.c* $targetdir/etc
[2039]2738
[2951]2739    # Handle the case where busybox and mount are dynamically linked
[3231]2740    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
[2951]2741    if [ $? -eq 0 ]; then
2742        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
[3692]2743        rm -f $targetdir/bin/mount
[2951]2744    fi
2745
[3522]2746    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
[3692]2747    CopyFromConf minimal $targetdir
[3357]2748
2749    # For older distributions expecting /sbin/init provides it
[3692]2750    if [ ! -e "$targetdir/sbin/init" ]; then
2751        (cd $targetdir/sbin ; ln -sf ../usr/sbin/init .)
[3357]2752    fi
2753
[3000]2754    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
[3692]2755    (cd $targetdir ; ln -sf /bin/bash bin/sh)
[3405]2756    LogFile "INFO: Using bash as default shell"
[2951]2757
2758    # Avoids an issue on some distro (RHEL5)
[3692]2759    rm -f $targetdir/etc/ld.so.conf.d/kernelcap*
[2164]2760
[3661]2761    # Management of DRBD
2762    which drbdadm &> /dev/null
2763    if [ $? -eq 0 ]; then
2764        # Do we find DRBD devices setup
2765        drbdadm sh-dev all | grep -E '^/dev' &> /dev/null
2766        if [ $? -eq 0 ]; then
[3692]2767            CopyFromConf drbd $targetdir
[3661]2768        fi
2769        # DRBD requires net activation
2770        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS drbd"
2771    fi
2772
[1724]2773    # Management of udev (which includes modprobe in rules)
[1759]2774    ps auxww | grep -v grep | grep -qw udevd
[1716]2775    if [ $? -eq 0 ]; then
[3692]2776        echo "udev device manager found" > $targetdir/tmp/USE-UDEV
[3405]2777        LogFile "INFO: udev device manager found"
[3692]2778        tar cf - -C / /etc/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /etc/udev analysis" $templog
[3204]2779        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
[3692]2780        rm -f $targetdir/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
[2894]2781        # Do not do it if it's a link (Ubuntu 64 bits #503)
[3197]2782        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
[3692]2783            tar cf - -C / /lib64/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
[2894]2784        fi
[2895]2785        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
[3692]2786            tar cf - -C / /lib32/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
[2895]2787        fi
2788        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
[3692]2789            tar cf - -C / /lib/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /lib/udev analysis" $templog
[2895]2790        fi
[3261]2791        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
[3692]2792            tar cf - -C / /usr/lib/udev 2> $templog | (cd $targetdir ; tar xf -)  || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
[3261]2793        fi
[3489]2794        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
[3692]2795            CopyFromConf udev $targetdir
[1720]2796        else
[2965]2797            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
[2963]2798            LogAll "         mindi will use static devices which may cause problems"
[3692]2799            rm -f $targetdir/tmp/USE-UDEV
[1720]2800        fi
[1716]2801    fi
[1786]2802
[2882]2803    # Management of potential HW info (ProLiant only at the moment)
[1880]2804    rm -rf $MINDI_CACHE/bkphw
2805    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2806    if [ -d $MINDI_CACHE/bkphw ]; then
[3565]2807        LogAll "INFO: Hardware Information found and saved ..."
[3692]2808        cp -rp $MINDI_CACHE/bkphw $targetdir
[1880]2809        if [ -f $MINDI_CACHE/tools.files ]; then
2810            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
[1863]2811            LocateDeps $lis > $MINDI_TMP/tools.lis
[3692]2812            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
[1863]2813        fi
[1880]2814        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
[3692]2815            mv -f $MINDI_CACHE/mindi-rsthw $targetdir
2816            chmod 755 $targetdir/mindi-rsthw
[1761]2817        fi
[1880]2818        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
[1761]2819    fi
2820
[2183]2821    # Management of perl scripts delivered needed at restore time
[3522]2822    LogAll "INFO: Analyzing perl modules dependencies..."
[3565]2823    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
[3405]2824    LogFile "DBG4: Perl Modules found:"
2825    LogFile "-------------------------"
[3403]2826    cat $MINDI_TMP/perl.lis >> $LOGFILE
[3405]2827    LogFile "-------------------------"
[3692]2828    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
[2183]2829
[3692]2830    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
[1721]2831
[1885]2832    needed_modules=""
[3697]2833    list_of_mods="$CDROM_MODS $FORCE_MODS"
[1885]2834
[3270]2835    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
[747]2836        # For PXE boot
[3697]2837        list_of_mods="$list_of_mods $NET_MODS"
[747]2838    fi
[1727]2839    for i in $DENY_MODS; do
[2963]2840        LogFile "INFO: Removing $i from the list of modules to load"
[3697]2841        list_of_mods=`echo ${list_of_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
[1727]2842    done
2843
[3253]2844    if [ "${kernelname}" != "" ]; then
2845        needed_modules_path=lib/modules/${kernelname}
[3257]2846        mkgmopt="-k ${kernelname}"
[3253]2847    else
2848        needed_modules_path=lib/modules/$KERVERRUN
2849        mkgmopt="-k $KERVERRUN"
2850    fi
[1914]2851
[3565]2852    [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
[3522]2853    LogAll "INFO: Analyzing kernel modules dependencies..."
[3697]2854    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_mods`
[3253]2855
[3257]2856    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
[3692]2857    cp --parents -aL $needed_modules $targetdir/ 2> $templog || LogAll "ERROR: Unable to copy modules to $targetdir" $templog
[3253]2858
2859    # Uncompress modules if not using udev and native modprobe
[3692]2860    if [ ! -f $targetdir/tmp/USE-UDEV ]; then
[3253]2861        for i in $needed_modules; do
2862            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
[3692]2863                gunzip -f $targetdir/$i
[1815]2864            fi
[3253]2865            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
[3692]2866                bunzip2 -f $targetdir/$i
[3253]2867            fi
2868            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
[3692]2869                unxz -f $targetdir/$i
[3253]2870            fi
2871            LogFile "INFO: Uncompressing $i"
2872        done
2873    fi
[1815]2874
[2964]2875    # Also copy modules.* in case of udev so that normal modprobe works
[3692]2876    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$targetdir" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $targetdir" $templog
[1815]2877
[2680]2878    # Copy FW in case some drivers needs it
[3163]2879    for d in "/lib" "/usr/lib"; do
[3201]2880        if [ -d "$d/firmware" -a ! -h $d ]; then
[3692]2881            cp -a "$d/firmware" "$targetdir$d"
[3163]2882        fi
2883    done
[2680]2884
[3163]2885    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2886    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
[3201]2887        if [ -d "$d/multipath" -a ! -h $d ]; then
[3692]2888            cp -a "$d/multipath" "$targetdir$d"
[3163]2889        fi
2890    done
2891
[3326]2892    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
[3692]2893    (cd $targetdir/usr/bin ; for i in `ls`; do if [ ! -e "$targetdir/bin/$i" ]; then (cd $targetdir/bin ; ln -sf ../usr/bin/$i .); fi; done)
[3324]2894
[2913]2895    # Copy an additional ProLiant tool for OBDR support
2896    if [ -f $MINDI_TMP/OBDR ]; then
[3117]2897        found=0
[2913]2898        if [ -x /usr/bin/hpsa_obdr_mode ]; then
[3692]2899            mkdir -p $targetdir/usr/bin
2900            cp -a /usr/bin/hpsa_obdr_mode $targetdir/usr/bin
[3565]2901            LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
[3117]2902            found=1
2903        fi
2904        if [ -x /usr/bin/sg_wr_mode ]; then
[3692]2905            mkdir -p $targetdir/usr/bin
[3135]2906            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
[3118]2907            LocateDeps $lis > $MINDI_TMP/obdr.lis
[3692]2908            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $targetdir ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
[3565]2909            LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
[3117]2910            found=1
2911        fi
2912        if [ $found -eq 0 ]; then
2913            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
[2913]2914            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2915        fi
2916    fi
2917
[3499]2918    if [ ! -e "/sbin/devfsd" ]; then
[2963]2919        LogFile "INFO: Deleting devfsd daemon from ramdisk"
[2995]2920        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
[3692]2921        rm -f $targetdir/sbin/devfsd
[747]2922    fi
[3692]2923    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $targetdir/tmp/TAPEDEV-LIVES-HERE
[1885]2924    if [ _"$MONDO_SHARE" != _"" ]; then
[3692]2925        MakeMondoConfigFile $targetdir/tmp/$MRCFG
2926        cp -f $targetdir/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2927        cp -f $MINDI_TMP/mountlist.txt $targetdir/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2928        echo -en "$FILES_IN_FILELIST" > $targetdir/tmp/FILES-IN-FILELIST
2929        echo -en "$LAST_FILELIST_NUMBER" > $targetdir/tmp/LAST-FILELIST-NUMBER
[747]2930    fi
[3310]2931
2932    # Create module list to load at restore time
[3692]2933    rm -f $targetdir/tmp/modules
[3310]2934    for m in $CDROM_MODS; do
[3692]2935        echo $m >> $targetdir/tmp/modules
[3310]2936    done
2937
[3692]2938    mkdir -p $targetdir/proc
[2963]2939    LogFile "---------------------------"
[3692]2940    LogFile "Content of initial targetdir:"
2941    LogFile "---------------------------- "
2942    (cd "$targetdir" ; ls -Rla ) >> $LOGFILE
[3372]2943    LogFile "---------------------------"
[3692]2944}
[2438]2945
[3692]2946CleanTargetDir() {
2947    [ "$targetdir" != "/" ] && rm -rf $targetdir
2948}
2949
2950PatchBootFiles() {
2951
2952    # Patch the real value of RAMDISK_SIZE now we have it
2953    if [ -d "$bigdir/syslinux" ]; then
2954        find $bigdir/syslinux -type f 1> $MINDI_TMP/bootf.lis 2> /dev/null
2955    fi
2956    if [ -d "$bigdir/EFI" ]; then
2957        find $bigdir/EFI -type f 1>> $MINDI_TMP/bootf.lis 2> /dev/null
2958    fi
2959    for i in `cat $MINDI_TMP/bootf.lis`; do
2960        perl -pi -e "s/RAMDISK_SIZE/$ramdisk_size/" $i
2961    done
2962    rm -f $MINDI_TMP/bootf.lis
2963
2964}
2965
2966MakeBootInitFile() {
2967
2968    local mountpoint tempfile res
2969    tempfile=$MINDI_TMP/temp.rd
2970    res=0
2971
2972    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2973    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2974
2975    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2976    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2977    res=$(($res+$?))
2978
2979    mountpoint=$MINDI_TMP/mountpoint.$$
2980    mkdir -p $mountpoint
2981    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2982    [ "$targetdir" = "/" ] && echo $targetdir | grep -qv $MINDI_TMP && Die "Wrong targetdir $targetdir"
2983    mv $targetdir/* $targetdir/.??* $mountpoint || Die "Unable to move files from $targetdir to $mountpoint! Please increase EXTRA_SPACE"
2984    res=$(($res+$?))
2985    rmdir $targetdir
2986
2987    LogFile "INFO: initrd image is $rdz_fname"