Context Navigation

source: MondoRescue/branches/3.2/mindi/rootfs/etc/init.d/rcS@ 3484

Visit:

Last change on this file since 3484 was 3484, checked in by Bruno Cornec, 8 years ago
Fix lvmetad usage on latest Debian (report from Hugo Vanwoerkom)
Property svn:keywords set to `Id`
File size: 31.8 KB

Rev	Line
[3274]	1	#!/bin/bash
[1]	2	#
[736]	3	# $Id: rcS 3484 2015-11-17 11:00:28Z bruno $
[1]	4	#
[736]	5	# init script launched during the restore process
[1]	6	#------------------------------------------------------------
	7
	8	CaughtSoftReset() {
[1747]	9	trap SIGTERM
[2890]	10
[2893]	11	reboot
[1]	12	}
	13
	14
	15	ConfigureLoggingDaemons() {
[1747]	16	echo -en "Running klogd..."
	17	klogd -c 2 > /dev/null 2> /dev/null
	18	echo -en "Done.\nRunning syslogd..."
	19	syslogd > /dev/null 2> /dev/null
	20	echo "Done."
	21	LogIt "klogd and syslogd have been started."
[1]	22	}
	23
	24
	25
	26	CopyBootDevEntry() {
[1747]	27	local outfile devfile
	28	devfile=/dev/boot_device
	29	outfile=`cat /BOOTLOADER.DEVICE 2> /dev/null`
	30	[ ! "$outfile" ] && return 0
	31	echo -en "Copying boot device to $outfile..."
	32	if [ -e "$outfile" ] ; then
[2174]	33	echo "not needed."
[1410]	34	return 0
[1747]	35	fi
	36	mkdir -p $outfile
	37	rmdir $outfile
	38	cp -pRdf $devfile $outfile
	39	if [ "$?" -ne "0" ] ; then
[1410]	40	echo "Failed."
	41	return 1
[1747]	42	else
[1410]	43	echo "OK."
	44	return 0
[1747]	45	fi
[1]	46	}
	47
	48
[2888]	49	GetShell() {
	50	echo -en "Type 'exit' to reboot the PC\n"
	51	umount -d /mnt/cdrom 2> /dev/null
	52	mount / -o rw,remount > /dev/null 2> /dev/null
[3051]	53	for i in `cat /proc/cmdline`; do
[3247]	54	echo $i \| grep -qi console= && console=`echo $i \| cut -d= -f2`
	55	echo $i \| grep -qi serial= && serial=`echo $i \| cut -d= -f2`
	56	done
	57	LogIt "Launching Shell"
	58	if [[ $serial != "" && -e $serial ]]; then
	59	setsid sh -c "exec sh <$serial >$serial 2>&1"
	60	elif [[ $console != "" && -e /dev/$console ]]; then
	61	setsid sh -c "exec sh </dev/$console >/dev/$console 2>&1"
	62	else
	63	setsid sh -c "exec sh </dev/tty1 >/dev/tty1 2>&1"
	64	fi
[2888]	65	}
[1]	66
[2888]	67
[1]	68	Die() {
[1747]	69	LogIt "Fatal error! $1" 1
[2888]	70	GetShell
[1]	71	}
	72
	73
	74	ExtractDevTarballs() {
[1747]	75	cd /
[3277]	76	if [ -x /usr/lib/systemd/systemd-udevd ]; then
	77	# Just use vc dev files. The other are useless and create huge delays with LVM
	78	tar -zxf /vc.tgz \|\| LogIt "Error occurred while extracting /vc.tgz"
	79	else
	80	for fname in ataraid.tgz ida.tgz i2o.tgz rd.tgz raw.tgz cciss.tgz nst.tgz dm.tgz vc.tgz ; do
	81	if [ ! -e "/$fname" ] ; then
	82	LogIt "/$fname not found; cannot extract to /." 1
	83	else
	84	echo -en "\rExtracting /$fname... "
	85	tar -zxf /$fname \|\| LogIt "Error occurred while extracting /$fname"
	86	fi
	87	done
	88	fi
[1747]	89	echo -en "\r"
	90	LogIt "Extracted additional /dev entries OK. " 1
[1]	91	}
	92
	93
	94
	95	LaunchTerminals() {
[2727]	96	# Depending on busybox version, syntax of openvt is different
	97	/bin/busybox --help 2>&1 \| head -1 \| grep -Eq "1\.7\.3\|1\.2\."
	98	if [ "$?" -eq "0" ] ; then
	99	opt=""
	100	else
	101	# 1.18.3 requires -c
	102	opt="-c"
	103	fi
[3278]	104	echo "Launching terminals on other ttys - Use ALT+F[2-6] to use them"
[2727]	105	openvt $opt 2 /bin/sh
	106	openvt $opt 3 /bin/sh
	107	openvt $opt 4 /bin/sh
	108	openvt $opt 5 /bin/sh
	109	openvt $opt 6 /bin/sh
	110	openvt $opt 7 /bin/sh /sbin/wait-for-petris
	111	openvt $opt 8 /usr/bin/tail -f $LOGFILE
[3274]	112	if [ -f /var/log/messages ]; then
	113	openvt $opt 9 /usr/bin/tail -f /var/log/messages
	114	fi
[1922]	115	# May avoid shell error messages
	116	chmod 666 /dev/tty* /dev/console
[2484]	117	# By default first serial line is configured as tty
[3274]	118	# Required to have a correct serial console support (MP on ia64 or VSP with iLO e.g.)
[2484]	119	for i in `cat /proc/cmdline` ; do
[3200]	120	echo $i \| grep -qi serial= && serial=`echo $i \| cut -d= -f2`
[2484]	121	done
[2487]	122	# Doing that is only valid when using a real serial line
[3328]	123	if [[ $serial != "" && -e $serial ]]; then
[2498]	124	LogIt "Redirecting serial $serial to /dev/tty" 1
[2487]	125	ln -s -f $serial /dev/tty
	126	fi
[1]	127	}
	128
	129
	130	LoadKeymap() {
[1747]	131	local fname
[3282]	132	fname=`grep keymap-lives-here /tmp/mondorestore.cfg \| cut -f2 -d' ' 2> /dev/null`
[1747]	133	[ "$fname" = "" ] && return
	134	if which loadkeys > /dev/null 2> /dev/null ; then
	135	loadkeys $fname
[2846]	136	LogIt "Using $fname keyboard map." 1
[1747]	137	else
[2731]	138	LogIt "Using default US keyboard map." 1
[1747]	139	fi
[1]	140	}
	141
	142
	143	UntarTapeStuff() {
[1747]	144	local old_pwd res
	145	old_pwd=`pwd`
	146	cd $GROOVY
	147	[ "$1" != "" ] && tapedev=$1
[3274]	148	[ ! "$tapedev" ] && tapedev=`grep media-dev /tmp/mondorestore.cfg 2>/dev/null \| tr -s ' ' ' ' \| cut -d' ' -f2`
[1962]	149	mt -f $tapedev rewind
[3119]	150	if [ $? -ne 0 ]; then
	151	LogIt "WARNING: $tapedev failed to rewind, either not a tape or still in OBDR mode." 1
	152	LogIt " Trying to find the corresponding SCSI generic device." 1
	153	c=0
	154	for d in `ls /sys/class/scsi_device/*`; do
	155	devtype=`cat $d/device/type`
[3153]	156	if [ "$devtype" -eq "1" ]; then
[3119]	157	LogIt "NOTE: Device /dev/sg$c is a Sequential device." 1
	158	if [ -x /usr/bin/sg_map ]; then
	159	dev=`/usr/bin/sg_map \| grep -E "^/dev/sg$c" \| awk '{print $2}'`
	160	LogIt " Retry using device $dev" 1
	161	fi
[3153]	162	elif [ "$devtype" -eq "0" ]; then
[3119]	163	# Skipping a HDD
[3135]	164	/bin/true
[3153]	165	elif [ "$devtype" -eq "5" ]; then
[3119]	166	# Checking whether it's a CD or a tape in OBDR mode
	167	grep -q -i -E 'dat\|ultrium\|tape' $d/device/model
	168	if [ $? -eq 0 ]; then
	169	# Is probably a Tape drive left in OBDR.
	170	LogIt "Found that /dev/sg$c is a tape drive (`cat $d/device/model`)." 1
	171	grep -q -i -w 'hp' $d/device/vendor
	172	if [ $? -eq 0 ]; then
	173	LogIt "This is an HP tape drive, even better :-)." 1
	174	fi
	175	if [ -x /usr/bin/sg_reset ]; then
	176	OBDR_MODS="st mptsas mptspi aic7xxx aic94xx mpt2sas "
	177	if [ "`grep -i obdrmods /proc/cmdline`" ]; then
	178	OBDR_MODS="$OBDR_MODS `cat /proc/cmdline \| sed 's~.obdrmods=\"\(.\)\".*~\1~'`"
	179	fi
	180	LogIt "Removing modules $OBDR_MODS." 1
	181	for m in $OBDR_MODS; do
	182	rmmod $i
	183	done
	184	LogIt "Trying to force device /dev/sg$c to be in sequential mode." 1
	185	/usr/bin/sg_reset -d /dev/sg$c
	186	LogIt "Inserting modules `rev $OBDR_MODS`." 1
	187	for m in `rev $OBDR_MODS`; do
	188	modprobe $i
	189	done
	190	LogIt "Retry again as the device has been set back into sequential mode." 1
	191	mt -f $tapedev fsf 2
	192	res=$?
	193	# exit the loop to continue and return if that previous mt failed.
	194	# If it succeeded we transparently continue !!
	195	break
	196	else
	197	LogIt "WARNING: Unable to reset /dev/sg$c as the sg_reset command is not availble." 1
	198	fi
	199	fi
	200	else
	201	LogIt "Device /dev/sg$c has an unknown type $devtype." 1
	202	fi
	203	c=`expr $c + 1`
	204	done
	205
	206	if [ $res -ne 0 ]; then
	207	cd $old_pwd
	208	return $res
	209	fi
	210	fi
	211
[1958]	212	mt -f $tapedev fsf 2
[2915]	213	# 32k is DEFAULT_INTERNAL_TAPE_BLOCK_SIZE
	214	mt -f $tapedev setblk 32768
[1747]	215	dd if=$tapedev bs=32k count=1024 \| tar -zx
	216	res=$?
	217	if [ "$res" -eq "0" ] ; then
[1958]	218	# Store the dev name in case we changed it interactively
[3274]	219	if [ -f "/tmp/mondorestore.cfg" ]; then
	220	sed -i "s/^media-dev .*$/media-dev $tapedev/" /tmp/mondorestore.cfg
[1983]	221	fi
[1747]	222	fi
	223	cd $old_pwd
	224	return $res
[1]	225	}
	226
	227	HandleTape() {
[1747]	228	local res tapedev
	229	tapedev="" ; # will be set by UntarTapeStuff()
[1963]	230
[1968]	231	# Here we can add the USB storage module, it's working even with OBDR !
[2964]	232	modprobe -q usb-storage 2> /dev/null
[1968]	233	# Tape takes some time to appear
	234	sleep 10
[1747]	235	cd $GROOVY
[1958]	236	UntarTapeStuff $tapedev
[1747]	237	res=$?
[3124]	238	tapedev="default tape device"
[1747]	239	while [ "$res" -ne "0" ] ; do
	240	LogIt "$tapedev failed to act as extended data disk for booting." 1
[3124]	241	LogIt "Please specify an alternate non-rewinding tape device, such as /dev/nst0" 1
[1885]	242	LogIt "or hit <Enter> to boot from another media." 1
[1747]	243	echo -en "---> "
	244	read tapedev
	245	if [ "$tapedev" ] ; then
	246	LogIt "User specified $tapedev instead"
	247	UntarTapeStuff $tapedev
	248	res=$?
	249	else
	250	LogIt "User opted not to specify an alternate tapedev"
	251	res=1
[1]	252	break
[1747]	253	fi
	254	done
[1962]	255	# For post-init
	256	export TAPEDEV=$tapedev
[1]	257
[1747]	258	if [ "$res" -ne "0" ] ; then
[1410]	259	cd /
[1885]	260	LogIt "Failed to use tape as extended datadisk. Reverting to another media." 1
	261	HandleCDROM
[1410]	262	res=$?
[1747]	263	else
[1410]	264	LogIt "Using tape as extended datadisk. Good." 3
	265	echo "Using tape as extd ddisk." > /tmp/TAPEDEV-HAS-DATA-DISKS
	266	res=0
[1747]	267	CD_MOUNTED_OK=yes
	268	fi
	269	return $res
[1]	270	}
	271
	272
	273
[1885]	274	HandleCDROM() {
[1825]	275	# Just in case we have an iLO ensure we will map it correctly
[1830]	276	echo "$DENY_MODS" \| grep -q "usb-storage "
[1829]	277	if [ $? -eq 0 ]; then
	278	return
	279	fi
[1826]	280	echo "Activating a potential USB Storage device"
[2964]	281	modprobe -q usb-storage 2> /dev/null
[1826]	282	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	283	sleep 1
	284	echo -en "."
	285	done
[1825]	286
[1747]	287	find-and-mount-cdrom
	288	res=$?
	289	if [ "$res" -ne "0" ] ; then
[898]	290	LogIt "First call to find-and-mount-cdrom failed." 1
	291	LogIt "Sleeping for 3 seconds and trying again." 1
	292	sleep 3
	293	find-and-mount-cdrom
	294	res=$?
[1747]	295	fi
	296	if [ "$res" -eq "0" ] ; then
[3274]	297	LogIt "OK, I am running on a CD-ROM. Good." 1
[1747]	298	CD_MOUNTED_OK=yes
	299	else
[3274]	300	LogIt "You probably not have the right drivers" 1
	301	LogIt "to support the hardware on which we are running" 1
	302	LogIt "Your archives are probably fine but" 1
	303	LogIt "your tape streamer and/or CD-ROM drive are unsupported at that point." 1
[898]	304	CD_MOUNTED_OK=""
[1747]	305	fi
	306	return 0
[1]	307	}
	308
	309
	310	PauseForRaids() {
[1747]	311	if [ "`dmesg \| grep -i "RAID Controller"`" != "" ] \|\| [ "`dmesg \| grep -i "Vendor: 3ware"`" != "" ] ; then
	312	LogIt "RAID controller(s) detected. Pausing 10 seconds to let them warm up." 1
	313	echo -en "Pausing..."
	314	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	315	sleep 1
	316	echo -en "$(($i*10))%..."
	317	done
	318	echo "Done."
	319	fi
[1]	320	}
	321
	322
	323	# 06/13/2002 --- DuckX's & Hugo's new routine
	324	# 10/11/2003 --- added a simple devfsd.conf file
	325	# 01/24/2005 --- cater for arbitrary locations of devfsd.conf by using the
	326	# config file path compiled into devfsd
	327	RunDevfsd() {
[1747]	328	loc=`which devfsd 2> /dev/null`
	329	if [ "$loc" != "" ] ; then
[1]	330	LogIt "Devfs found. Testing kernel support..."
	331	if [ ! -e "/dev/.devfsd" ] ; then
[746]	332	mount -t devfs devfs /dev 2>> $LOGFILE
[3274]	333	if [ "$?" -ne "0" ] ; then
	334	LogIt "Error while trying to mount devfs"
[1]	335	else
[3274]	336	LogIt "Devfs mounted OK"
[1]	337	fi
	338	fi
	339	#check if the kernel supports devfs
	340	if [ -e "/dev/.devfsd" ] ; then
	341	[ -d "/proc/1" ] \|\| mount -n /proc
	342	LogIt "Kernel support found. Creating config file and starting devfsd"
[911]	343	conffile=`strings $loc \| grep -E "devfsd.conf$"`
[1]	344	[ "$conffile" ] \|\| conffile="/etc/devfsd.conf"
	345	confpath=`echo $conffile \| sed "s/\/devfsd\.conf$//"`
	346	[ -d "$confpath" ] \|\| mkdir -p $confpath
	347	echo -en "REGISTER .* MKOLDCOMPAT\nUNREGISTER .* RMOLDCOMPAT\n" > $conffile
	348	devfsd /dev &
	349	sleep 5
	350	else
	351	LogIt "No devfs kernel support."
	352	fi
[1747]	353	fi
[1]	354	}
	355
[1718]	356	# Taken from udev management in Mandriva 2008.0. Kudos guys
[2845]	357	MakeExtraNodes () {
[1718]	358	# there are a few things that sysfs does not export for us.
	359	# these things are listed in /etc/udev/links.conf
	360	grep '^[^#]' /etc/udev-links.conf \| \
	361	while read type name arg1; do
	362	[ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] \|\|continue
	363	case "$type" in
	364	L) ln -s $arg1 /dev/$name ;;
	365	D) mkdir -p /dev/$name ;;
[1719]	366	M) mknod /dev/$name $arg1 && chmod 600 /dev/$name;;
	367	*) echo "udev-links.conf: unparseable line (%s %s %s)\n" "$type" "$name" "$arg1" ;;
[1718]	368	esac
	369	done
	370	}
	371
[2845]	372	CreateDevMakedev() {
[3368]	373	if [ -e /sbin/MAKEDEV ]; then
	374	ln -sf /sbin/MAKEDEV /dev/MAKEDEV
	375	else
	376	ln -sf /bin/true /dev/MAKEDEV
	377	fi
[1792]	378	}
[1718]	379
[1716]	380	RunUdevd() {
[3274]	381	# Initial Inspiration from Mandriva 2008.0 startup script
	382	LogIt "Preparing udev environment..." 1
[1718]	383	mv /dev /dev.static
	384	mkdir /dev
[3293]	385	# Contributed during LinuxCon Japan !
	386	if [ -x /usr/lib/systemd/systemd-udevd ]; then
	387	mount -n -t devtmpfs none /dev
	388	else
	389	mount -n -o size=5M,mode=0755 -t tmpfs none /dev
	390	MakeExtraNodes
	391	mount -n -t devpts -o mode=620 none /dev/pts
	392	fi
[3295]	393	mkdir -p /dev/shm
[1718]	394	mount -n -t tmpfs none /dev/shm
[1789]	395	if [ -e /proc/sys/kernel/hotplug ]; then
	396	echo > /proc/sys/kernel/hotplug
	397	fi
[1734]	398	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	399	echo 0 > /proc/sys/kernel/printk
[2081]	400	# Many possibilities depending on udev versions
[1759]	401	if [ -x /sbin/startudev ]; then
	402	/sbin/startudev
	403	fi
[2081]	404	if [ -x /sbin/start_udev ]; then
	405	/sbin/start_udev
	406	fi
[1759]	407	# Depending on udevd version it gives back the hand or not :-(
[2673]	408	ps \| grep -v grep \|grep udevd 2> /dev/null 1> /dev/null
[2437]	409	if [ $? -ne 0 ]; then
[3277]	410	echo "Waiting for udev to start..."
[2965]	411	if [ -x /sbin/udevd ]; then
	412	/sbin/udevd --daemon &
	413	elif [ -x /usr/bin/udevd ]; then
	414	/usr/bin/udevd --daemon &
[3172]	415	elif [ -x /usr/lib/systemd/systemd-udevd ]; then
[3274]	416	# from https://github.com/hut/minirc/blob/master/rc
[3277]	417	echo "INFO: This is the systemd version of udev"
[3293]	418	# Contributed during LinuxCon Japan
	419	#mount -n -t tmpfs tmpfs /sys/fs/cgroup
[3285]	420	#mount -n -t cgroup cgroup /sys/fs/cgroup/systemd
[3305]	421	mkdir -p /run/udev
	422	mkdir -p /run/systemd/journal
[3274]	423	/usr/lib/systemd/systemd-udevd --daemon
	424	udevadm trigger --action=add --type=subsystems
	425	udevadm trigger --action=add --type=devices
[2965]	426	fi
[2437]	427	sleep 5
[3274]	428	LogIt "udev started manually" 1
[2437]	429	fi
[1792]	430	mkdir -p /dev/.udev/queue/
[1789]	431	if [ -x /sbin/udevtrigger ]; then
	432	/sbin/udevtrigger
	433	fi
[2442]	434	echo "Waiting for udev to discover..."
[2845]	435	CreateDevMakedev
[2182]	436	# Newer version use udevadm for that
[2437]	437	if [ -x /sbin/udevsettle ]; then
[2442]	438	/sbin/udevsettle --timeout=10
[2846]	439	LogIt "Discovering with udevsettle"
[2965]	440	elif [ -x /sbin/udevadm ] \|\| [ -x /usr/bin/udevadm ]; then
	441	ua=`UdevadmTrigger`
	442	$ua settle --timeout=10
[2846]	443	LogIt "Discovering with udevadm"
[1816]	444	fi
[1824]	445	# It seems we need to have more static devs on some distro were
	446	# udev as some other requirements to be covered later on.
	447	# So in the mean time:
	448	for d in `ls /dev.static`; do
	449	if [ ! -e /dev/$d ]; then
	450	mv /dev.static/$d /dev
	451	fi
	452	done
[1816]	453	echo $PKLVL > /proc/sys/kernel/printk
[1716]	454	}
[1]	455
[1761]	456	RstHW() {
[1]	457
[1761]	458	# Restore the HW configuration if available (NOT by default)
	459	answer="NO"
[1]	460
[1815]	461	grep -q nohw /proc/cmdline
	462	if [ "$?" -eq 0 ]; then
	463	return
	464	fi
[1761]	465	if [ -x ./mindi-rsthw ]; then
	466	grep -q RESTORE /proc/cmdline
	467	if [ "$?" -ne 0 ]; then
[1815]	468	#clear
[1761]	469	echo "*********************************************************************"
	470	echo "Do you want to restore the HW configuration of the original machine ?"
	471	echo "(This may dammage your hardware so be sure to check twice before saying yes)"
	472	echo "*********************************************************************"
	473	echo "Please confirm by typing YES exactly as written here (NO by default)"
	474	echo -n "--> "
	475	read answer
	476	else
	477	answer="YES"
	478	fi
[1910]	479	if [ "$answer" = "YES" ] ; then
[1761]	480	./mindi-rsthw
	481	fi
	482	fi
	483	}
[1]	484
[1761]	485
[1787]	486	StartUSBKbd() {
	487	# Prepare minimal USB env in case we have USB kbd such as with iLO
	488	[ -d /proc/bus/usb ] && ! grep -q /proc/bus/usb /proc/mounts && mount -t usbfs none /proc/bus/usb
[1830]	489	echo "$DENY_MODS" \| grep -Eq 'uhcd_hci \|usbhid \|usbcore '
[1829]	490	if [ $? -eq 0 ]; then
	491	return
	492	fi
[2964]	493	modprobe -q uhcd_hci 2> /dev/null
	494	modprobe -q usbhid 2> /dev/null
[1787]	495	}
[1]	496
	497
[1787]	498
[1]	499	StartLvms() {
[2477]	500	if [ "`grep -i nolvm /proc/cmdline`" ]; then
	501	return;
	502	fi
[1747]	503	if [ -e "/tmp/i-want-my-lvm" ] ; then
[3274]	504	# Recent LVM need this caching daemon to work
[3484]	505	LVMETAD=""
	506	if [ -x /sbin/lvmetad ]; then
	507	LVMETAD="/sbin/lvmetad"
	508	fi
[3274]	509	if [ -x /usr/sbin/lvmetad ]; then
[3484]	510	LVMETAD="/usr/sbin/lvmetad"
	511	fi
	512	if [ -x $LVMETAD ]; then
[3277]	513	mkdir -p /run/lvm
[3484]	514	$LVMETAD
[3274]	515	fi
[1747]	516	LogIt "Scanning LVM's..." 1
[739]	517	if which lvm ; then
[2964]	518	modprobe -q dm-mod 2> /dev/null
	519	modprobe -q dm_mod 2> /dev/null
[2845]	520	lvm vgscan --mknodes
[739]	521	else
[2845]	522	vgscan
[739]	523	fi
[2533]	524
	525	# Exclude devices we may not want
	526	rm -f /tmp/restorevgs
[2564]	527	for d in $MINDI_EXCLUDE_DEVS ; do
[2580]	528	echo "LVM exclusion == $d"
[3286]	529	# LVM: $4 to be checked if changed
[2533]	530	EXCLUDE_VGS=`grep " $d" /tmp/i-want-my-lvm \| grep vgcreate \| awk '{print $4}'`
	531	vg=`echo $EXCLUDE_VGS \| sed "s/ /\|/g"`
	532	if [ "$vg" != "" ]; then
	533	re=" $d\|$vg"
	534	else
	535	re=" $d"
	536	fi
	537	# Remove VGs from i-want-my-lvm
	538	grep -Ev "$re" /tmp/i-want-my-lvm > /tmp/i-want-my-lvm.new
	539	mv /tmp/i-want-my-lvm.new /tmp/i-want-my-lvm
	540	# Prepare script to restore the VG exluded here if needed
	541	for v in $EXCLUDE_VGS; do
	542	echo "vgcfgrestore $v" >> /tmp/restorevgs
	543	# Remove LVs from mountlist
[3286]	544	# LVM: sed to be checked if changed
[2533]	545	EXCLUDE_LVS=`grep " $v" /tmp/i-want-my-lvm \| grep lvcreate \| sed "s/^.-n \([^ ][^ ]\) .*$/$1/"`
	546	for l in $EXCLUDE_LVS; do
[2535]	547	# FIXME: Should search for all possible device names here
[3203]	548	if [ -f "/tmp/mountlist.txt" ]; then
	549	grep -Ev "/dev/$v/$l" /tmp/mountlist.txt > /tmp/mountlist.txt.new
	550	grep -Ev "/dev/mapper/${v}-$l" /tmp/mountlist.txt.new > /tmp/mountlist.txt
	551	fi
[2533]	552	done
	553	done
	554	done
	555
[3286]	556	# LVM: remove #
[1747]	557	grep -E "^#.vgchange" /tmp/i-want-my-lvm \| sed "s/^#[ ]//" > /tmp/start-lvm
	558	chmod +x /tmp/start-lvm
	559	echo -en "Starting LVM's..."
	560	/tmp/start-lvm &
	561	for i in 1 2 3 4 5 ; do
[2845]	562	echo -en "."
	563	sleep 1
[1747]	564	done
	565	echo "Done."
	566	fi
[1]	567	# If necessary, cannibalize 'analyze-my-lvm'; copy some of its code here,
	568	# pipe vgscan's output, strip it, run 'vgchange' on its output, etc.etc.
[1747]	569	LogIt "LVM's have been started."
[1]	570	}
	571
[2177]	572	StartPowerPath() {
[1]	573
[2177]	574	# Taken from the init script of EMC PowerPath on RHEL
[2845]	575	if [ -f /etc/emcp_devicesDB.dat ]; then
	576	if [ -f /etc/emcp_devicesDB.idx ]; then
	577	/etc/opt/emcpower/emcpmgr map -p > /dev/null 2>&1
	578	fi
	579	fi
[2177]	580
[2845]	581	/sbin/powermt config > /dev/null 2>&1
	582	# Wait for udev to finish creating emcpower devices
	583	#
	584	pdfound=1
	585	for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15; do
	586	pdfound=1
	587	for pd in `/bin/ls -d /sys/block/emcpower* 2> /dev/null`; do
	588	bpd=`basename $pd`
	589	if [ ! -e /dev/$bpd ]; then
	590	pdfound=0
	591	sleep 2
	592	break;
	593	fi
	594	done
	595	if [ "$pdfound" -eq 1 ]; then
[2177]	596	break
[2845]	597	fi
	598	done
	599	if [ "$pdfound" -eq 0 ]; then
	600	echo "Unable to start PowerPath"
	601	fi
[2177]	602
[2845]	603	/sbin/powermt load > /dev/null 2>&1
	604	/etc/opt/emcpower/emcpmgr map > /dev/null 2>&1
	605	/etc/opt/emcpower/powercf -C > /dev/null 2>&1
	606	if [ ! -e /etc/powermt.custom ]; then
	607	/sbin/powermt save > /dev/null 2>&1
	608	fi
	609	/sbin/powermt register > /dev/null 2>&1
	610	/sbin/powermig transition -startup -noprompt > /dev/null 2>&1
[2177]	611	}
	612
[2072]	613	StartMpath() {
	614	if [ "`grep -i nompath /proc/cmdline`" ]; then
	615	return;
	616	fi
[3203]	617	if [ -f "/tmp/mountlist.txt" ] && [ "`grep mpath /tmp/mountlist.txt`" ]; then
[2353]	618	if [ -x /sbin/multipath ]; then
	619	echo "Starting Mpath..."
	620	mkdir -p /var/lib/multipath
	621	cat > /etc/multipath.conf << EOF
[2072]	622	defaults {
	623	user_friendly_names yes
	624	}
	625	EOF
[2353]	626	/sbin/multipath -v 0
	627	if [ -x /sbin/kpartx ]; then
	628	/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p"
	629	fi
[2846]	630	LogIt "Multipath started"
[2072]	631	fi
	632	fi
	633	}
	634
[1]	635	StartRaids() {
[1747]	636	local raid_devices i
[1273]	637
[2353]	638	if [ "`grep -i noraid /proc/cmdline`" ]; then
	639	return;
	640	fi
	641
[3203]	642	if [ -f "/tmp/mountlist.txt" ]; then
	643	raid_devices=`grep /dev/md /tmp/mountlist.txt \| cut -d' ' -f1`
	644	else
	645	raid_devices=""
	646	fi
	647
[623]	648	if which raidstart > /dev/null 2> /dev/null ; then
[1747]	649	for i in $raid_devices ; do
	650	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	651	LogIt "$i is started already; no need to run 'raidstart $i'" 1
	652	else
[623]	653	LogIt "Running 'raidstart $i'" 1
	654	raidstart $i
[1747]	655	fi
	656	done
[623]	657	elif which mdrun > /dev/null 2> /dev/null ; then
[2353]	658	if [ "`grep -i nomd /proc/cmdline`" ]; then
	659	return;
	660	fi
[623]	661	LogIt "Running 'mdrun'" 1
	662	mdrun
[1273]	663	elif which mdadm > /dev/null 2> /dev/null ; then
[2353]	664	if [ "`grep -i nomd /proc/cmdline`" ]; then
	665	return;
	666	fi
[1273]	667	LogIt "Running 'mdadm'" 1
	668	for i in $raid_devices ; do
[1747]	669	if grep `basename $i` /proc/mdstat > /dev/null 2> /dev/null ; then
	670	LogIt "$i is started already; no need to run 'mdadm $i'" 1
	671	else
[1610]	672	if [ -f /etc/mdadm.conf ] ; then
	673	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm.conf" 1
	674	mdadm -A $i -c /etc/mdadm.conf
	675	elif [ -f /etc/mdadm/mdadm.conf ] ; then
	676	LogIt "Running 'mdadm $i' with user supplied /etc/mdadm/mdadm.conf" 1
	677	mdadm -A $i -c /etc/mdadm/mdadm.conf
	678	else
	679	LogIt "Running 'mdadm $i'" 1
	680	mdadm -Ac partitions -m dev $i
	681	fi
[1747]	682	fi
	683	done
[2075]	684	elif which dmraid > /dev/null 2> /dev/null ; then
[2072]	685	if [ "`grep -i nodmraid /proc/cmdline`" ]; then
	686	return;
	687	fi
	688	for x in $(/sbin/dmraid -ay -i -p -t 2>/dev/null \| grep -E -iv "^no " \|awk -F ':' '{ print $1 }') ; do
	689	echo "Please send the result of /sbin/dmraid -ay -i -p -t to the devteam !!!"
	690	return
	691	#dmname=$(resolve_dm_name $x)
	692	#[ -z "$dmname" ] && continue
	693	#/sbin/dmraid -ay -i -p "$dmname" >/dev/null 2>&1
	694	#/sbin/kpartx -a -p p "/dev/mapper/$dmname"
	695	done
[623]	696	else
	697	LogIt "Warning: Neither 'raidstart' nor 'mdrun''found. RAID devices may not have started." 1
	698	fi
	699
[1]	700	}
	701
	702
	703	TryAgainToFindCD() {
[1747]	704	local res
	705	mount \| grep /mnt/cdrom && return 0
[3274]	706	[ "`grep "backup_media_type" /tmp/mondorestore.cfg 2> /dev/null \| grep "cdstream"`" ] && return
[1747]	707	LogIt "Trying to mount CD-ROM a 2nd time..."
	708	find-and-mount-cdrom --second-try
	709	res=$?
	710	if [ "$res" -eq "0" ] ; then
	711	CD_MOUNTED_OK=yes
	712	LogIt "CD-ROM drive mounted successfully." 1
	713	else
	714	LogIt "I still cannot find or mount the CD-ROM drive, by the way."
	715	fi
[1]	716	}
	717
	718
	719
	720	UseTmpfs()
	721	{
[1747]	722	local mount_cmd
	723	echo -en "Mounting /tmp/tmpfs..."
	724	mkdir -p /tmp/tmpfs
[1]	725	# For technical reasons, some sets are as large as 16MB.
	726	# I am allowing 32MB because selective restore occupies a lot of space.
[3035]	727	for size in 256m 128m 64m 48m 40m 32m ; do
[1747]	728	mount_cmd="mount /dev/shm -t tmpfs -o size=$size" ; # was 34m until 04/2003
	729	LogIt "Trying '$mount_cmd'"
	730	$mount_cmd /tmp/tmpfs 2>> $LOGFILE
	731	res=$?
	732	[ "$res" -eq "0" ] && break
	733	done
	734	if [ "$res" -ne "0" ] ; then
	735	LogIt "Failed. I could not run '$mount_cmd /tmp/tmpfs'. Your kernel is BROKEN or you do not have enough RAM." 1
	736	umount /tmp/tmpfs > /dev/null 2> /dev/null
	737	rmdir /tmp/tmpfs
[3274]	738	ln -sf /mnt/RESTORING/tmp /tmp/tmpfs; # used by mondorestore
[1747]	739	LogIt "Failed to mount /tmp/tmpfs; using ugly softlink instead"
	740	else
	741	LogIt "Great. Pivot succeeded w/ size=$size" 1
	742	echo -en "Pivoting /tmp..."
	743	umount /tmp/tmpfs
	744	mkdir -p /tmp.old
[1752]	745	mv /tmp/* /tmp.old/
	746	# Try to Deal with a busybox bug on inexistant links
[3454]	747	cp /tmp/* /tmp.old/ 2> /dev/null
[1747]	748	rm -f /tmp/*
	749	$mount_cmd /tmp
[3454]	750	mv /tmp.old/* /tmp/ 2> /dev/null
[1752]	751	# Try to Deal with a busybox bug on inexistant links
[3454]	752	cp /tmp.old/* /tmp/ 2> /dev/null
[1747]	753	rm -rf /tmp.old
	754	mkdir -p /tmp/tmpfs
	755	mkdir -p $GROOVY
[1]	756	echo "Done."
	757	LogIt "Successfully mounted dynamic /tmp ramdisk"
	758	# mkdir -p /tmp/tmpfs/var
	759	# mv -f /var/log /tmp/tmpfs/var/log
	760	# ln -sf /tmp/tmpfs/var/log /var/log
[1747]	761	fi
[1]	762	}
	763
	764
	765	WelcomeMessage()
	766	{
[1747]	767	echo "********************************************************************"
	768	echo "MINDI-LINUX by Mondo Dev Team - web site: http://www.mondorescue.org"
	769	echo "Boot disk based on AlfaLinux & Trinux. BusyBox by Erik Andersen."
[1]	770	which petris > /dev/null 2> /dev/null && echo "Petris was written by Peter Seidler <p.seidler@mail1.stofanet.dk>."
[1747]	771	echo "Executables and source code are covered by the GNU GPL. No warranty."
	772	echo "running on $ARCH"
	773	echo "********************************************************************"
[1]	774	}
	775
	776	EnableCcissIfAppropriate() {
[2908]	777	local f
[2913]	778
	779	# In some cases, the OBDR tape remains in CD-ROM mode. This branch solves that issue (#498)
[3274]	780	if [ "`grep -i 'obdr ' /tmp/mondorestore.cfg 2>/dev/null`" ] && [ -x /usr/bin/hpsa_obdr_mode ]; then
[2925]	781	for lun in `/usr/bin/hpsa_obdr_mode -m query /dev/cciss/* 2>&1 \| grep "is an OBDR device" \| cut -d' ' -f4`; do
[2913]	782	/usr/bin/hpsa_obdr_mode -m query -l $lun /dev/cciss/* 2>&1 \| grep -q "is in CD-ROM mode"
	783	if [ $? -eq 0 ]; then
	784	# This tape/lun should be brought back in Sequential mode
	785	LogIt "Putting back tape $lun in Sequential mode..."
	786	/usr/bin/hpsa_obdr_mode -m tape -l $lun /dev/cciss/* 2>&1 > /dev/null
	787	fi
	788	done
	789	fi
	790
	791	# Now engage all Smart Array controllers to detect attached devices
[2955]	792	if [ -d "/proc/driver/cciss" ]; then
	793	for f in /proc/driver/cciss/cciss* ; do
	794	LogIt "Engaging $f"
	795	echo "engage scsi" > $f
	796	LogIt "...result=$?"
	797	done
	798	fi
[1]	799	}
	800
[1802]	801	ModprobeAllModules() {
[1]	802
[3278]	803	echo "Searching for modules to install..."
[3310]	804	if [ ! -e /tmp/modules ]; then
	805	LogIt "Unable to find the modules list. Computing one. This may take some time..."
	806	lismod=`find /lib/modules -name '\.ko' -o -name '\.o'`
	807	for m in $lismod; do
	808	k=`basename $m \| sed 's/\.ko.*$//'`
	809	j=`basename $k \| sed 's/\.o.*$//'`
	810	echo "$j" >> /tmp/modules
	811	done
	812	fi
[2562]	813	# loading forced modules first
[3310]	814	for j in `cat /tmp/modules`; do
[2562]	815	echo "$FORCE_MODS" \| grep -q "$j "
	816	if [ $? -eq 0 ]; then
	817	echo "Forcing first $j..."
[2964]	818	modprobe -q $j 2> /dev/null
[2562]	819	fi
	820	done
[3310]	821	for j in `cat /tmp/modules`; do
[1830]	822	echo "$DENY_MODS" \| grep -q "$j "
[1829]	823	if [ $? -eq 0 ]; then
[1830]	824	echo "Denying $j..."
[1829]	825	continue
	826	fi
[2562]	827	echo "$FORCE_MODS" \| grep -q "$j "
	828	if [ $? -eq 0 ]; then
	829	continue
	830	fi
[1829]	831	echo "Probing $j..."
[2964]	832	modprobe -q $j 2> /dev/null
[1802]	833	done
	834	}
	835
[2755]	836	UdevadmTrigger() {
[2844]	837
[2965]	838	# This function should just echo the return value $ua
	839
[2844]	840	if [ -x /sbin/udevadm ]; then
[2965]	841	ua="/sbin/udevadm"
	842	elif [ -x /usr/bin/udevadm ]; then
	843	ua="/usr/bin/udevadm"
	844	else
	845	LogIt "WARNING: Unable to find udevadm. Not triggering udev"
	846	ua="/bin/true"
	847	fi
	848
	849	v="`$ua --version`"
	850
	851	if [ -x "$v" ]; then
	852	LogIt "Triggering udev again..."
	853	if [ "$v" -ge "146" -a "$v" -lt "174" ]; then
	854	$ua trigger --type=failed
	855	elif [ "$v" -lt "146" ]; then
	856	$ua trigger --retry-failed
[2755]	857	else
[2965]	858	LogIt "... not needed"
[2755]	859	fi
[2844]	860	fi
[2965]	861	echo $ua
[2755]	862	}
	863
[287]	864	ExtractDataDisksAndLoadModules() {
[2846]	865	LogIt "Installing additional tools ..." 1
[3430]	866	# TODO: test return value
[287]	867	install-additional-tools
[2081]	868
	869	# Retry failed udev events now that local filesystems are mounted read-write
	870	# (useful for rules creating network ifcfg files)
	871	if [ -e "/tmp/USE-UDEV" ] ; then
[2965]	872	ua=`UdevadmTrigger`
[2081]	873	fi
[287]	874	}
[1]	875
	876	# ------------------------ main -----------------------
	877
[1698]	878	MINDI_VER=PBVER
	879	MINDI_REV=PBREV
[1]	880	trap CaughtSoftReset SIGTERM
[2964]	881	trap GetShell SIGINT
[1643]	882	LOGFILE=/var/log/mondorestore.log
[1236]	883	PATH=/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/mondo:/usr/games
[1]	884	GROOVY=/tmp/groovy-stuff
	885	USER=root
[2163]	886	ARCH=`uname -m`
[1]	887
[2163]	888	export PATH GROOVY USER LOGFILE ARCH
	889
[3310]	890	mount -o remount,rw /
[3274]	891	rm -f $LOGFILE
[898]	892
[3277]	893	mkdir /proc 2> /dev/null
	894	mount /proc /proc -t proc
	895
[3274]	896	# Creates log file
	897	LogIt ""
[3279]	898	# Backup fd
	899	exec 4>&2 5>&1
[3277]	900	# Redirect every message to the LOGFILE
	901	exec > >(tee -a ${LOGFILE})
	902	exec 2> >(tee -a ${LOGFILE} >&2)
	903
[3278]	904	echo "Welcome to init (from mindi ${MINDI_VER}-r${MINDI_REV})"
[3274]	905
	906	mkdir /sys 2> /dev/null
[3277]	907	mount /sys /sys -t sysfs
[3274]	908
[1]	909	[ ! "$GROOVY" ] && Die "I'm not groovy!"
[1885]	910	for i in $GROOVY /mnt/cdrom /mnt/isodir /var/local/petris /tmp/isodir; do
[1747]	911	mkdir -p $i
[1]	912	done
[1824]	913	# For ESX 3
	914	[ -d /proc/vmware ] && ! grep -q /vmfs /proc/mounts && mount -t vmfs /vmfs /vmfs
[1]	915
[1829]	916	if [ "`grep -i denymods /proc/cmdline`" ]; then
	917	export DENY_MODS="`cat /proc/cmdline \| sed 's~.denymods=\"\(.\)\".*~\1~'` mondonone"
[1830]	918	else
	919	export DENY_MODS=" "
[1829]	920	fi
[3274]	921	if [ "`grep -i 'obdr ' /tmp/mondorestore.cfg 2> /dev/null`" ]; then
[1958]	922	# Do not try to load usb storage when dealing with OBDR it makes the modprobe hang :-(
[1960]	923	export DENY_MODS="usb-storage $DENY_MODS"
[1958]	924	fi
[1829]	925	if [ "`grep -i forcemods /proc/cmdline`" ]; then
	926	export FORCE_MODS="`cat /proc/cmdline \| sed 's~.forcemods=\"\(.\)\".*~\1~'` mondonone"
[1830]	927	else
	928	export FORCE_MODS=" "
[1829]	929	fi
[1826]	930	echo "Activating a potential USB keyboard/mouse"
[1787]	931	StartUSBKbd
	932
[1720]	933	if [ -f /proc/sys/kernel/exec-shield ]; then
	934	echo 0 > /proc/sys/kernel/exec-shield 2>> /dev/null
	935	fi
[1]	936
[1729]	937	if [ -f /proc/modules ]; then
	938	echo "/sbin/modprobe" > /proc/sys/kernel/modprobe
	939	fi
	940
[1716]	941	if [ -e "/tmp/USE-UDEV" ] ; then
[1747]	942	RunUdevd
[1716]	943	fi
[1798]	944	ExtractDevTarballs
[1]	945	LaunchTerminals
[1718]	946
[3274]	947	# Keeping kernel silent for module insertion
[1789]	948	PKLVL=`cut -f1 /proc/sys/kernel/printk`
	949	echo 0 > /proc/sys/kernel/printk
[1922]	950	ModprobeAllModules
[1789]	951	echo $PKLVL > /proc/sys/kernel/printk
[1718]	952
[1]	953	EnableCcissIfAppropriate
	954	#-------------------------------
	955	#WHOLIVESINAPINEAPPLEUNDERTHESEA#;# --- don't touch this :)
	956	#-------------------------------
	957	UseTmpfs
[3274]	958	if [ ! -e "/tmp/mondorestore.cfg" ] ; then
	959	LogIt "Warning - /tmp/mondorestore.cfg not found"
[1]	960	fi
[3325]	961	if [ "`grep -i pxe /proc/cmdline`" ] \|\| [ "`grep -i net /proc/cmdline`" ] \|\| [ "`grep 'netfs-proto ' /tmp/mondorestore.cfg`" ]; then
[2380]	962	# We need to get here exported variables from start-netfs
[3324]	963	. /usr/sbin/start-netfs
[2182]	964	fi
[1]	965
[3274]	966	if [ "`grep -i 'obdr ' /tmp/mondorestore.cfg 2>/dev/null`" ] \|\| [ "`grep -i ' udev' /tmp/mondorestore.cfg 2>/dev/null`" ]; then
[1747]	967	HandleTape
[287]	968	ExtractDataDisksAndLoadModules
[737]	969	elif [ "`grep -i pxe /proc/cmdline`" ]; then
[287]	970	# Simulate a local CD
	971	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	972	CD_MOUNTED_OK=yes
[287]	973	ExtractDataDisksAndLoadModules
[2182]	974	# Fake the conf file to force it to NFS mode, even if we made originally a CD (mandatory for mondorestore to work correctly)
[3274]	975	sed -i "s/backup-media-type.*/backup-media-type netfs/" /tmp/mondorestore.cfg
	976	elif [ "`grep -i usb= /proc/cmdline`" ] \|\| [ "`grep -i usb /tmp/mondorestore.cfg 2>/dev/null \| grep media-type`" ]; then
[3324]	977	. /usr/sbin/start-usb
[1698]	978
	979	# Simulate a local CD
	980	echo "/mnt/cdrom" > /tmp/CDROM-LIVES-HERE
[1747]	981	CD_MOUNTED_OK=yes
[1698]	982	ExtractDataDisksAndLoadModules
[1]	983	else
[1885]	984	HandleCDROM
[287]	985	ExtractDataDisksAndLoadModules
[1]	986	fi
	987	res=$?
	988	ConfigureLoggingDaemons
	989	if [ -e "/tmp/USE-DEVFS" ] ; then
[2878]	990	umount -d /mnt/cdrom 2> /dev/null
[1747]	991	mv /dev/cdrom /cdrom.lnk 2> /dev/null
	992	CD_MOUNTED_OK=""
	993	RunDevfsd
[1]	994	fi
[3441]	995
	996	if [ "`grep -i excludedevs /proc/cmdline`" ]; then
	997	export MINDI_EXCLUDE_DEVS="`cat /proc/cmdline \| sed 's~.excludedevs=\"\(.\)\".*~\1~'` mondonone"
	998	for d in $MINDI_EXCLUDE_DEVS ; do
	999	echo "Mountlist exclusion == $d"
	1000	if [ -e "/tmp/mountlist.txt" ]; then
	1001	perl -i -ne 'print $_ unless m~$d~' /tmp/mountlist.txt
	1002	fi
	1003	done
	1004	else
	1005	export MINDI_EXCLUDE_DEVS=" "
	1006	fi
	1007
[1813]	1008	LoadKeymap
	1009	WelcomeMessage
	1010	RstHW
[2559]	1011	echo "Starting potential Raid/Multipath ..."
[2580]	1012	[ -e "/tmp/mountlist.txt" ] && cp -f /tmp/mountlist.txt /tmp/mountlist.original
[1]	1013	PauseForRaids
	1014	StartRaids
[2072]	1015	StartMpath
[1]	1016	StartLvms
	1017	CopyBootDevEntry
	1018	mkdir -p /tmp/tmpfs
	1019	sleep 2
	1020	#clear
[3203]	1021	if [ -e "/dev/md0" ] && [ ! -e "/dev/md/0" ] && [ -e "/tmp/mountlist.txt" ] && [ "`grep /dev/md/ /tmp/mountlist.txt`" != "" ] ; then
[1747]	1022	LogIt "Creating /dev/md/* softlinks just in case." 1
	1023	mkdir -p /dev/md
	1024	cp -af /dev/md0 /dev/md/0 2> /dev/null
	1025	cp -af /dev/md1 /dev/md/1 2> /dev/null
	1026	cp -af /dev/md2 /dev/md/2 2> /dev/null
[1]	1027	fi
	1028
[241]	1029	if ! [ "`grep -i "pxe" /proc/cmdline`" ] ; then
[1]	1030	res="`cat /mnt/cdrom/archives/THIS-CD-NUMBER 2> /dev/null`"
	1031	[ "$res" != "1" ] && [ "$res" != "" ] && Die "This is CD #$res in the series. Please insert CD #1."
	1032	[ -e "/cdrom.lnk" ] && mv -f /cdrom.lnk /dev/cdrom && mount /dev/cdrom /mnt/cdrom && CD_MOUNTED_OK=yes
	1033	[ "$CD_MOUNTED_OK" != "yes" ] && TryAgainToFindCD
	1034	#mount \| grep cdrom > /dev/null 2> /dev/null \|\| mount /dev/cdrom /mnt/cdrom >> $LOGFILE 2>> $LOGFILE
	1035	fi
	1036	hack-cfg-if-necessary \|\| LogIt "Cannot find hack-cfg-if-necessary"
	1037
[1403]	1038	# Log some useful info
[1837]	1039	LogIt "init (from mindi v$MINDI_VER-r${MINDI_REV})"
[1413]	1040	LogIt "/proc/cmdline is:"
[2346]	1041	LogIt "----------"
[1403]	1042	cat /proc/cmdline >> $LOGFILE
[2346]	1043	LogIt "----------"
[1413]	1044	LogIt "df result:"
	1045	LogIt "----------"
[1403]	1046	df >> $LOGFILE
[1413]	1047	LogIt "-------------"
	1048	LogIt "mount result:"
	1049	LogIt "-------------"
[1403]	1050	mount >> $LOGFILE
[1413]	1051	LogIt "-------------"
	1052	LogIt "lsmod result:"
	1053	LogIt "-------------"
[1403]	1054	lsmod >> $LOGFILE
[1413]	1055	LogIt "-------------"
[1476]	1056	LogIt "dmesg result:"
	1057	LogIt "-------------"
	1058	dmesg >> $LOGFILE
[2015]	1059	LogIt "-------------"
[2979]	1060	LogIt "/proc/mdstat:" >> $LOGFILE
	1061	LogIt "-------------"
	1062	cat /proc/mdstat >> $LOGFILE
	1063	LogIt "-------------"
[2015]	1064	LogIt "/proc/swaps:" >> $LOGFILE
	1065	LogIt "-------------"
	1066	cat /proc/swaps >> $LOGFILE
	1067	LogIt "-------------"
	1068	LogIt "/proc/filesystems:" >> $LOGFILE
	1069	LogIt "-------------"
	1070	cat /proc/filesystems >> $LOGFILE
	1071	LogIt "-------------"
	1072	LogIt "/proc/partitions:" >> $LOGFILE
	1073	LogIt "-------------"
	1074	cat /proc/partitions >> $LOGFILE
[2346]	1075	LogIt "-------------"
	1076	LogIt "fdisk result:" >> $LOGFILE
	1077	LogIt "-------------"
	1078	fdisk -l >> $LOGFILE
[2768]	1079	LogIt "-------------"
[3274]	1080	if [ -f /tmp/mondorestore.cfg ]; then
	1081	LogIt "/tmp/mondorestore.cfg result:" >> $LOGFILE
[2832]	1082	LogIt "-------------"
[3274]	1083	cat /tmp/mondorestore.cfg >> $LOGFILE
[2832]	1084	fi
[1403]	1085
[1983]	1086	ide-opt
[1]	1087
	1088	#ctrlaltdel soft
	1089	for i in null stdout stdin stderr ; do
[1747]	1090	cp -af /dev/$i /tmp
[1]	1091	done
[2081]	1092	# Not sure it's still needed, but shouldn't hurt
	1093	if [ -e "/tmp/USE-UDEV" ] ; then
[2965]	1094	ua=`UdevadmTrigger`
[2081]	1095	fi
[3274]	1096	if grep "backup-media-type" /tmp/mondorestore.cfg > /dev/null 2> /dev/null ; then
[1747]	1097	LogIt "backup-media-type is specified in config file - great."
[2197]	1098	LogIt "Calling post-init"
[2380]	1099	# start-netfs moved it under /tmp as the NFS share is already unmounted
[3210]	1100	if [ _"$pre" != _"" ] && [ "`echo $pre \| grep -E '^/tmp/isodir'`" ]; then
[2533]	1101	pre=`echo $pre \| sed 's\|^/tmp/isodir\|/tmp\|'`
[2255]	1102	fi
[3210]	1103	if [ _"$pre" != _"" ] && [ -x $pre ]; then
[2255]	1104	echo "Executing preliminary script $pre"
	1105	LogIt "Executing preliminary script $pre"
	1106	$pre
	1107	fi
[1747]	1108	post-init
[1]	1109	else
[1747]	1110	LogIt "backup-media-type is not specified in config file."
[1885]	1111	LogIt "I think this media has no archives on it."
[1]	1112	fi
[2255]	1113	if [ "`grep -i "post=" /proc/cmdline`" ] ; then
[2249]	1114	for i in `cat /proc/cmdline` ; do
[3210]	1115	echo $i \| grep -qi post= && post=`echo $i \| cut -d= -f2`
[2249]	1116	done
[2380]	1117	# start-netfs moved it under /tmp as the NFS share is already unmounted
[2255]	1118	if [ "`echo $post \| grep -E '^/tmp/isodir'`" ]; then
	1119	post=`echo $post \| sed 's\|^/tmp/isodir\|/tmp\|'`
[2253]	1120	fi
[2581]	1121	if [ -r $post ]; then
[2255]	1122	echo "Executing final script $post"
	1123	LogIt "Executing final script $post"
	1124	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	1125	mount-me
	1126	fi
[2581]	1127	chmod 755 $post
[2255]	1128	$post
	1129	if [ "`echo $post \| grep -E '^/mnt/RESTORING'`" ]; then
[2253]	1130	unmount-me
	1131	fi
[2249]	1132	fi
	1133	fi
[1612]	1134	if grep "RESTORE" /proc/cmdline > /dev/null 2> /dev/null ; then
	1135	echo "Rebooting in 10 seconds automatically as per reboot order"
	1136	echo -en "Press ^C to interrupt if you have to ..."
	1137	for i in 1 2 3 4 5 6 7 8 9 10 ; do
	1138	sleep 1
	1139	echo -en "."
	1140	done
	1141	echo "Boom."
	1142	sleep 1
	1143	else
[2888]	1144	GetShell
[1612]	1145	fi
[1]	1146	CaughtSoftReset

Note: See TracBrowser for help on using the repository browser.

Download in other formats: