source: branches/3.2/mindi/mindi @ 3597

Last change on this file since 3597 was 3597, checked in by bruno, 3 years ago

Boot loader is the same for CentOS than RHEL.

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 127.4 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3597 2016-07-08 14:18:26Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=150000      # increase if you run out of ramdisk space
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash dm-thin-pool multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V MindiCD -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143fi
144
145# Function to log on screen only
146LogScreen() {
147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
152}
153
154# Function to log in log file only
155LogFile() {
156
157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160        rm -f "$2"
161    fi
162}
163
164# Function to log in both screen and logfile
165LogAll() {
166    LogScreen "$1"
167    LogFile "$1" "$2"
168}
169
170# Last function called before exiting
171# Parameter is exit code value
172# Should be declared here as used immediately below potentialy
173MindiExit() {
174    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
175    LogFile "INFO: End date : `date`" 
176    if [ _"$MONDO_SHARE" != _"" ] ; then
177        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178        if [ -f $LOGFILE ]; then
179            cat $LOGFILE >> /var/log/mondoarchive.log
180        else
181            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
182        fi
183        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184    fi
185
186    cd /
187    sync&
188
189    # Clean temporary files only when standalone mindi
190    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191        rm -Rf $MINDI_TMP
192    fi
193    exit $1
194}
195
196Die() {
197    local i
198    if [ "$1" = "" ] ; then
199        LogAll "FATAL ERROR"
200    else
201        LogAll "FATAL ERROR. $1"
202    fi
203    if [ _"$2" != _"" ]; then
204        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
205    fi
206    rm -f "$2"
207
208    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
209    LogAll "See http://www.mondorescue.org for more information."
210    LogAll "WE CANNOT HELP unless you enclose that file.\n"
211    MindiExit -1
212}
213
214# Now we can create what we need
215MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
216if [ $? -ne 0 ]; then
217    df $TMPDIR
218    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
219fi
220if [ _"$MINDI_TMP" = _"" ]; then
221    Die "MINDI_TMP is empty, aborting"
222fi
223if [ _"$MINDI_TMP" = _"/" ]; then
224    Die "MINDI_TMP is /, aborting"
225fi
226export MINDI_TMP
227
228# ----------------------------------------------------------------------------
229
230
231AbortHere() {
232    [ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
233    Die "Program is terminating in response to signal received from OS/user"
234}
235
236
237Aborted() {
238    trap SIGHUP SIGTERM SIGTRAP SIGINT
239    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
240    Die "User abort."
241}
242
243
244AddFileToCfgIfExists() {
245    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
246}
247
248
249AddKeyboardMappingFile() {
250    local mappath r included_list included_item i res ii sss
251    mappath=$1
252    KBDEPTH=$(($KBDEPTH+1))
253    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
254    if [ -e "$bigdir/$mappath" ] ; then
255        LogFile "INFO: $mappath already added"
256        return
257    elif [ -d "$bigdir/$mappath" ] ; then
258        echo "Cannot add $mappath: it's a directory. Sorry."
259        return
260    fi
261    LogFile "INFO: Added kbd map $mappath"
262    if [ ! -e "$mappath" ] ; then
263        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
264        if [ ! -e "$mappath" ] ; then
265            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
266            return
267        fi
268    fi
269
270    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
271    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
272        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
273    else
274        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
275    fi
276    for included_item in $included_list ; do
277        if [ ! -e "$included_item" ] ; then
278            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
279            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
280            for ii in $sss ; do
281                [ -e "$ii" ] && AddKeyboardMappingFile $ii
282            done
283        else
284            AddKeyboardMappingFile $included_item
285        fi
286    done
287}
288
289
290CopyDependenciesToDirectory() {
291    local outdir incoming counter d found tdir templog
292    outdir=$1
293    templog=$MINDI_TMP/$$.log
294    mkdir -p $outdir
295    incoming=`ReadLine`
296    counter=$3
297    > $templog
298
299    while [ "$incoming" != "" ] ; do
300        if [ "$3" = "1" ]; then
301            counter=$(($counter+1))
302            LogProgress $counter $2
303        fi
304        # Non absolute file names should not arrive till here => skipped
305        if [ `echo "$incoming" | cut -c1` != '/' ]; then
306            LogAll "WARNING: Unable to handle $incoming"
307            incoming=`ReadLine`
308            continue
309        fi
310        # no parent directory of incoming should be a link, copy is not possible in that case
311        d=`dirname "$incoming"`
312        found="false"
313        while [ $d != "/" -a $found = "false" ]; do
314            [ -h "$d" ] && found="true"
315            d=`dirname "$d"`
316        done
317        if [ -d "$incoming" -a ! -h "$incoming" ]; then
318            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
319        elif [ -e "$incoming" ] && [ $found = "false" ]; then
320            if [ ! -h "$incoming" ]; then
321                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
322            else
323                tdir=`dirname "$incoming"`
324                if [ ! -e "$outdir/$tdir" ]; then
325                    mkdir -p "$outdir/$tdir"
326                fi
327                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
328            fi
329            # Only uncompress modules if not using udevd
330            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
331                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
332            fi
333            [ -x "$outdir" ] && StripExecutable $outdir
334        fi
335        incoming=`ReadLine`
336    done
337}
338
339
340CountItemsIn() {
341    local r
342    r=0
343    for q in $1 ; do
344        r=$(($r+1))
345    done
346    echo $r
347}
348
349
350DropOptimizedLibraries() {
351    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
352    filelist=$1
353    outdir=$2
354
355    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
356    if [ "$list_of_optimized_libraries" = "" ] ; then
357        return 0
358    fi
359    echo -en "Dropping i686-optimized libraries if appropriate"
360    for optimized_lib_name in $list_of_optimized_libraries ; do
361        echo -en "."
362        reason=""
363        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
364        echo "$vanilla_lib_name" >> $filelist
365        LogFile "INFO: Adding $vanilla_lib_name to filelist"
366        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
367        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
368
369        # This may return multiple files
370        for resolved in `mr-read-all-link $vanilla_lib_name`; do
371            LogFile "INFO: Adding as deps $resolved to filelist"
372            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
373            if [ "$vanilla_resolved_name" != "$resolved" ]; then
374                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
375                rmdir $outdir$resolved > /dev/null 2> /dev/null
376                ln -sf $vanilla_resolved_name $outdir$resolved
377                LogFile "INFO: Excluding deps $resolved" 
378                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
379                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
380                echo "$vanilla_resolved_name" >> $filelist.tmp
381                mv -f $filelist.tmp $filelist
382            fi
383        done
384    done
385    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
386    mv -f $filelist.tmp $filelist
387    echo -e "$DONE"
388}
389
390
391FindAndAddUserKeyboardMappingFile() {
392    local r res mapfile mappath included_item included_list keyfile mp locale
393    LogAll "INFO: Analyzing your keyboard's configuration."
394    KEYDIR=/usr/lib/kbd
395    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
396    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
397    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
398    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
399    if [ ! -e "$KEYDIR" ] ; then
400        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
401        return 0
402    else
403        LogFile "INFO: KEYDIR=$KEYDIR"
404    fi
405    if [ -e "/etc/sysconfig/keyboard" ] ; then
406        LogFile "INFO: Red Hat-style config detected."
407        keyfile=/etc/sysconfig/keyboard
408    elif [ -e "/etc/vconsole.conf" ] ; then
409        LogFile "INFO: New Fedora style config detected."
410        keyfile=/etc/vconsole.conf
411    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
412        LogFile "INFO: Slackware-style config detected."
413        keyfile=/etc/rc.d/rc.keymap
414    elif [ -e "/etc/rc.config" ] ; then
415        LogFile "INFO: Debian-style config detected."
416        keyfile=/etc/rc.config
417    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
418        LogFile "INFO: Debian-style config detected."
419        mkdir -p $bigdir/tmp
420        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
421        KBDEPTH=0
422        mkdir -p $bigdir/etc/console
423        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
424        echo ""
425        echo -e "$DONE"
426        return 0
427    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
428        LogFile "INFO: Ubuntu-style config detected."
429        mkdir -p $bigdir/tmp
430        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
431            kbdfile="/etc/console-setup/boottime.kmap.gz"
432        else
433            kbdfile="/etc/console-setup/cached.kmap.gz"
434        fi
435        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
436        KBDEPTH=0
437        mkdir -p $bigdir/etc/console-setup
438        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
439        echo ""
440        echo -e "$DONE"
441        return 0
442    elif [ -e "/etc/default/keyboard" ]; then
443        LogFile "INFO: New Debian-style config detected."
444        keyfile=/etc/default/keyboard
445    elif [ -e "/etc/rc.conf" ] ; then
446        LogFile "INFO: ArchLinux config detected."
447        keyfile=/etc/rc.conf
448    elif [ -e "/etc/conf.d/keymaps" ] ; then
449        LogFile "INFO: Gentoo-style config detected."
450        keyfile=/etc/conf.d/keymaps
451    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
452        LogFile "INFO: X11-style config detected."
453        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
454    else
455        LogFile "Searching for rc.config ..."
456        keyfile=`find /etc -name rc.config | head -n1`
457        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
458            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
459            return
460        else
461            LogFile "INFO: Found $keyfile"
462        fi
463    fi
464    if [ ! -e "$KEYDIR/keymaps" ] ; then
465        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
466        return
467    fi
468    LogFile "INFO: keyfile=$keyfile"
469    # For SLES we need to remove the .map.gz extension Cf #614
470    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
471    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
472    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`             # Gentoo, ArchLinux & New fedora
473    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
474    [ ! "$locale" ] && locale=`grep -Ei 'XkbLayout' "$keyfile" | grep -v '^#' | cut -d= -f2 | tr -d '"'`            # New Debian 8+
475    LogFile "INFO: locale=$locale"
476    #
477    # Process the keymaps dir once for all
478    # AddKeyboardMappingFile will use it recursively
479    #
480    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
481    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
482    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
483    # For new distro such as RHEL 7 we need that additional search
484    [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
485    # If we have multiple keymaps then log it !!
486    echo "$mp" | grep -q " " >> $LOGFILE
487    if [ $? -eq 0 ]; then
488        LogAll "WARNING: Multiple keymaps found: $mp"
489        LogFile "INFO: The following one will be used"
490    fi
491    for i in $mp ; do
492        mappath=$i
493        [ -e "$i" ] && [ ! -d "$i" ] && break
494    done
495    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
496        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
497    fi
498    LogFile "INFO: mappath = $mappath"
499    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
500        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
501        return
502    fi
503    echo -en "INFO: Adding keyboard mapping tables"
504    mkdir -p $bigdir/tmp
505    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
506    KBDEPTH=0
507    AddKeyboardMappingFile $mappath
508    echo ""
509    echo -e "$DONE"
510    rm -f $MINDI_TMP/keymaps.find
511    return 0
512}
513
514
515FindLdlinux32Binary() {
516    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
517    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
518    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
519    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
520    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
521    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
522    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
523    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
524    if [ ! -e "$LDLINUXC32" ]; then 
525        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
526        LDLINUXC32=/tmp/idoesnthopefullyexist
527    else
528        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
529    fi
530}
531
532
533FindMboot32Binary() {
534    MBOOTC32=/usr/lib/syslinux/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
536    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
537    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
538    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
539    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
540    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
541    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
542    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
543    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
544}
545
546FindLdlinuxe64Binary() {
547    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
548    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
549    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
550    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
551    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
552    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
553    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
554    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
555    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
556}
557
558FindSyslinux64EFI() {
559    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
560    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
561    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
562    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
563    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
564    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
565    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
566    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
567    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
568}
569
570FindIsolinuxBinary() {
571    ISOLINUX=/usr/lib/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
573    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
574    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
575    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
576    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
577    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
578    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
579    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
580    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
581}
582
583
584GenerateGiantDependencyList() {
585    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
586
587    echo -en "INFO: Analyzing dependency requirements"
588    outfile=$1
589    tempfile=$MINDI_TMP/$$.txt
590    incoming=`ReadLine`
591
592    > $tempfile
593    progress=0
594    res=0
595    noof_lines=$2
596    while [ "$incoming" != "" ] ; do
597        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
598            incoming=`ReadLine`
599            continue
600        fi
601        if [ "$incoming" = "LVMFILES:" ] ; then
602            break
603        fi
604        filelist=`GenerateListForFile "$incoming"`
605        r=$?
606        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
607        res=$(($res+$r))
608#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
609        for fname in $filelist ; do
610            [ "$fname" != "" ] && echo "$fname" >> $tempfile
611        done
612        progress=$(($progress+1))
613        LogProgress $progress $noof_lines
614        incoming=`ReadLine`
615    done
616    if  [ "$incoming" = "LVMFILES:" ] ; then
617        incoming=`ReadLine`
618        lvmversion=""
619        while [ "$incoming" != "" ] ; do
620            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
621                incoming=`ReadLine`
622                continue
623            fi
624            filelist=`GenerateListForFile "$incoming"`
625            for tool in $filelist ; do
626                lvmresolved=`readlink -f $tool`
627                if [ "$tool" = "$lvmresolved" ]; then
628                    echo "$tool" >> $tempfile
629                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
630                    if [ "$lvmversion" = "" ] ; then
631                        lvmversion=`$lvmresolved`
632                        echo "$lvmresolved" >> $tempfile
633                    fi
634                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
635                    if [ "$lvmversion" = "200" ]; then
636                        # pvdata and lvmcreate_initrd don't exist in LVM2
637                        case "$toolstripped" in
638                        "pvdata")
639                            continue
640                            ;;
641                        "lvmcreate_initrd")
642                            continue
643                            ;;
644                        esac
645                    fi
646                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
647                    if [ -e "$toolpath" ] ; then
648                        echo "$toolpath" >> $tempfile
649                        echo "$tool" >> $tempfile
650                    else
651                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
652                    fi
653                    if [ -e "$toolpath" ] ; then
654                        echo "$toolpath" >> $tempfile
655                        echo "$tool" >> $tempfile
656                    else
657                        echo "Where are your LVM-Tools? Couldn't find $tool"
658                    fi
659                else
660                    echo "$tool" >> $tempfile
661                fi
662            done
663            progress=$(($progress+1))
664            LogProgress $progress $noof_lines
665            incoming=`ReadLine`
666        done
667    fi
668    echo -en "$DONE\nINFO: Making complete dependency list"
669
670    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
671    mv -f $tempfile.new $tempfile
672    > $outfile.pre
673    progress=0
674    noof_lines=`cat $tempfile | wc -l`
675    LogFile "---------------------------------"
676    LogFile "List of dependencies:             "
677    LogFile "---------------------------------"
678    for fname in `cat $tempfile` ; do
679        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
680        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
681        progress=$(($progress+1))
682        LogProgress $progress $noof_lines
683    done
684    if [ _"$MONDO_SHARE" != _"" ]; then
685        mkdir -p $bigdir/tmp
686        mkdir -p $bigdir/usr/bin
687        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
688            LogAll "\nINFO: Incorporating post-nuke tarball"
689            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
690        fi
691        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
692            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
693        else
694            LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
695            LogAll "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
696            LogAll "       If Mindi was called by Mondo then send a bug report."
697            LogAll "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
698            LogAll "       Finally, run Mindi again."
699            Die "Odd."
700        fi
701        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
702        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
703            LogAll "\nINFO: Incorporating Network-related settings"
704            for r in NETFS-* ; do
705                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
706                LogFile "INFO: Copying $r to ramdisk"
707            done
708        fi
709    fi
710    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
711    rm -f $tempfile $outfile.pre
712    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
713    return $res
714}
715
716
717GenerateListForFile() {
718    local files_found loc fname incoming i res
719    incoming="$1"
720    files_found=""
721    res=0
722
723    for fname in $incoming ; do
724        files_found="$files_found `LocateFile $fname`"
725    done
726
727    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
728}
729
730
731# Returns all disk devices which are part of a raid array
732GetAllRaidMembers() {
733    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
734}
735
736
737GetFileSizeList() {
738    local i
739    for i in `find $1 -type d -o -print` ; do
740        du -sk $i
741    done
742}
743
744
745# Check kernel filesystem capabilites for accessing initrd image
746# Could be ext2 FS (old mode) or initramfs (new mode)
747#
748# Interface definition:
749# param #1: absolute path to kernel image
750GetInitrdFilesystemToUse() {
751
752    # interface test: make sure we have one parameter
753    if [ $# -ne 1 ]; then
754        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
755    fi
756
757    # interface parameters
758    local lvKernelImage=$1
759
760    # local constants (filesystem magic strings)
761    local lcMagicCramfs="<3>cramfs: wrong magic"
762    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
763    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
764    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
765
766    # local variables
767    local lvOffset
768    local lvScanRes
769    local lvUseFilesystem
770
771    # say where we are.
772    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
773
774    # verify that file exists
775    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
776
777    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
778    file $lvKernelImage 2>&1 | grep -q gzip
779    if [ $? -eq 0 ]; then
780        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
781        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
782    else
783        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
784        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
785        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
786        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
787        if [ $lvOffset -eq 0 ]; then
788            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
789            lvScanRes=$lcMagicInitfs
790        else
791            lvOffset=`expr $lvOffset / 2`
792            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
793            # scan again  kernel image
794            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
795        fi
796    fi
797
798    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
799    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
800        lvUseFilesystem="ext2fs"
801    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
802        lvUseFilesystem="ext3fs"
803    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
804        lvUseFilesystem="initramfs"
805    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
806        lvUseFilesystem="cramfs"
807    else
808        # In that case, we are most probably after 2.6.30 and use the supported initramfs
809        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
810        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
811        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
812        lvUseFilesystem="initramfs"
813    fi
814
815    # say what we are using
816    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
817
818    # return file system to use
819    echo "$lvUseFilesystem"
820
821}
822
823# Searches members of raid device
824# $1: raid device (/dev/md...)
825GetRaidDevMembers() {
826    if [ ! -f /etc/raidtab ]; then 
827        return
828    fi
829    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
830}
831
832
833ListAllPartitions() {
834    local res currline partition all_partitions ap_orig remaining i j
835
836    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
837    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
838    if [ -e "/vmfs/volumes" ]; then
839        # For VMWare ESX 3 get the device names of these volumes
840        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
841    fi
842    return
843}
844
845
846ListKernelModulePaths() {
847    local module_list module fname r kern
848    module_list="$MODULES"
849    # Remove unwanted modules from list
850    for i in $DENY_MODS; do
851        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
852    done
853###
854### Sq-Modification ... Use kernelname for module search path if specified
855###
856    if [ "${kernelname}" != "" ]
857    then
858        kern=${kernelname}
859    else
860        kern="$KERVERRUN"
861    fi
862    export KERVER=$kern
863###
864### Sq-Mod End
865###
866    # Get rid of duplicates
867    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
868        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
869        if [ -z "$r" ]; then
870            if [ "`echo "$MODULES" | grep -w $module`" ]; then
871                r="[live module file not found]"
872            else
873                r="[extra module file not found]"
874            fi
875        else
876            [ -f "$r" ] && echo "$r"
877        fi
878        LogFile "INFO: module $module --> $r"
879    done
880    find /lib/modules/$kern/modules.* -type f 2> /dev/null
881}
882
883#
884# Critical function which computes all dependencies (dyn. lib.)
885# for a list of binaries
886#
887LocateDeps() {
888    local incoming fname deps
889    incoming="$*"
890    deps=""
891
892    for fname in $incoming ; do
893        if [ ! -e "$fname" ] ; then
894            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
895            if echo $fname | grep lvm &> /dev/null ; then
896                LogFile "          This warning only affects you if you are using LVM."
897                if echo "$MODULES" | grep lvm &> /dev/null ; then
898                    LogFile "          I think you are, so please take heed!"
899                else
900                    LogFile "          I don't think you are, so don't worry about it."
901                fi
902            fi
903        else
904            deps="$deps $fname" 
905        fi
906    done
907    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
908}
909
910
911LocateFile() {
912    local i j path fname_to_find location output resolved tmp stub cache_id loclist
913    fname_to_find="$1"
914    # It's an absolute path
915    j=`echo "$fname_to_find" | cut -c1`
916    if [ _"$j" = _"/" ]; then
917        dn=`dirname $fname_to_find`
918        # We suppose that the link is already included, just add the new file
919        if [ -h "$dn" ]; then
920            newdn=`readlink -f $dn`
921            bn=`basename $fname_to_find`
922            output="$newdn/$bn"
923        else
924            output="$fname_to_find"
925        fi
926        if [ -h "$output" ] ; then
927            output="`mr-read-all-link $output` $output"
928        fi
929        echo "$output"
930        return 0
931    fi
932    # It's not an absolute path
933    output=""
934    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
935    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
936        [ -h "$path" ] && continue
937        [ ! -e "$path/$fname_to_find" ] && continue
938        output="$path/$fname_to_find $output"
939        if [ -h "$path/$fname_to_find" ] ; then
940            output="`mr-read-all-link $path/$fname_to_find` $output"
941        fi
942    done
943    if [ "$output" = "" ] ; then
944        return 1
945    fi
946    echo "$output"
947    return 0
948}
949
950LogProgress() {
951    local i progress modres noof_lines title
952 
953    progress=$1
954    noof_lines=$2
955    title=$3
956
957    i=$(($progress*100))
958    if [ $noof_lines -ne 0 ]; then
959        i=$(($i/$noof_lines))
960    else
961        i=0
962    fi
963
964    if [ _"$MONDO_SHARE" != _"" ]; then 
965        echo "$title        $i%"
966    else
967        echo -en "\r\t\t\t\t\t\t\t\t"
968        echo -en "$i"
969        echo -en "%"
970        modres=$(($progress%4))
971        [ "$modres" -eq "0" ] && echo -en "\t/"
972        [ "$modres" -eq "1" ] && echo -en "\t-"
973        [ "$modres" -eq "2" ] && echo -en "\t\\"
974        [ "$modres" -eq "3" ] && echo -en "\t|"
975    fi
976}
977
978# Called by MakeBootInitFile, to make /tmp/$MRCFG
979MakeMondoConfigFile() {
980    local outfile use_lzo use_comp use_star
981    outfile=$1
982    > $outfile
983    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
984    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
985    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
986    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
987    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
988    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
989    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
990    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
991    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
992    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
993    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
994    echo "use-lzo $use_lzo" >> $outfile
995    echo "use-gzip $use_gzip" >> $outfile
996    echo "use-star $use_star" >> $outfile
997    echo "use-lzma $use_lzma" >> $outfile
998    echo "use-comp $use_comp" >> $outfile
999    echo "boot-type $BOOT_TYPE" >> $outfile
1000    echo "datestamp `date`" >> $outfile
1001    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1015
1016    # Deal with network configuration in a portable way
1017    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1018        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1019    fi
1020}
1021
1022# Get PV's for an LV
1023GetPVsForLV() {
1024    if [ -n "$1" ]; then
1025        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1026        if [ -z "$vg" ]; then
1027            return
1028        fi
1029        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1030    fi
1031}
1032
1033
1034MakeMountlist() {
1035    local mountlist all_partitions current_partition \
1036partition_size partition_format outstring partition_number \
1037partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1038absolute_partition old_partition_fmt current_lvolume uname skip
1039
1040    LogFile "------------------------------------"
1041    LogFile "INFO: Your raw fstab file looks like this:"
1042    LogFile "------------------------------------"
1043    cat $MY_FSTAB >> $LOGFILE
1044    LogAll "-----------------------------------"
1045    LogAll "INFO: Your mountlist will look like this:"
1046    LogAll "-----------------------------------"
1047
1048# mountlist(OUT)
1049    mountlist=$1
1050
1051# NB: partition = device
1052# NB: mountpt = where the device is mounted
1053
1054    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1055
1056    [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1057    > $mountlist
1058    all_partitions=""
1059   
1060    if [ $LVM != "false" ]; then
1061        LogFile "INFO: Analyzing LVM..."
1062        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1063        if [ $? -ne 0 ]; then
1064            LVM="false"
1065        fi
1066        # Excluded LVs and GVs are not reported here
1067        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1068    fi
1069    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1070    for i in $IMAGE_DEVS ; do
1071        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1072    done
1073    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1074    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1075    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1076    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1077    for c_p in $all_partitions ; do
1078        # Skip fd/cd devices, network FS, cifs
1079        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1080        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1081        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1082            current_partition=`readlink -f $c_p`
1083            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1084                current_partition="$c_p"
1085            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1086                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1087                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1088            fi
1089            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1090        else
1091            current_partition="$c_p"
1092        fi
1093        [ "$c_p" = "none" ] && continue
1094        redhat_label=""
1095        label=""
1096        uuid=""
1097        absolute_partition=`readlink -f $c_p`
1098        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1099
1100        # set default in case we dont't find it
1101        str_to_find_fmt_with=$current_partition
1102
1103        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1104        # current_partition contains only first column of /etc/fstab
1105        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1106            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1107            actual_dev=""
1108
1109            # 1st try, findfs - the RHEL way of finding labels and their partitions
1110            if [ -x "/sbin/findfs" ]; then
1111                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1112            fi
1113   
1114            # 2nd try : blkid, the good way for all LABEL except swap
1115            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1116                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1117                # For LVM FS it will give a /dev/dm-# which should then be converted
1118                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1119                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1120                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1121                    for dev in `ls /dev/mapper/*`; do
1122                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1123                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1124                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1125                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1126                            break
1127                        fi
1128                    done
1129                fi
1130            fi
1131   
1132            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1133            # For LVM gives a /dev/mapper entry
1134            if [ "x$actual_dev" = "x" ]; then
1135                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1136            fi
1137   
1138            # 4th try, with vol_id
1139            # SWAP only
1140            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1141                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1142                for dev_swap in $list_swaps ; do
1143                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1144                    if [ "x$dev_exists" != "x" ]; then
1145                        actual_dev=$dev_swap
1146                        break;
1147                    fi
1148                done
1149            fi
1150
1151            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1152            # LABEL=SW-cciss/c0d0p3 (RDP)
1153            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1154            # SWAP only
1155            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1156                    skip=""
1157                    uname=$KERVERRUN
1158                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1159                    # 2.6.12 needs 16 (FC3)
1160                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1161                    # 2.6.19 and upper needs 1052
1162                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1163                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1164                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1165                    if [ $skip = "" ]; then
1166                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1167                    fi
1168                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1169                    do
1170                        # Location of the swap label for kernel 2.6
1171                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1172                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1173                            actual_dev=$try_dev
1174                        fi
1175                    done
1176            fi
1177
1178            # Check if one of all those tries has known success
1179            if [ "x$actual_dev" != "x" ]; then
1180                current_partition=$actual_dev
1181            else
1182                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1183            fi
1184        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1185        # current_partition contains only first column of /etc/fstab
1186        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1187            uuid=`echo "$current_partition" | cut -d'=' -f2`
1188            actual_dev=""
1189
1190            # 1st try, findfs - the RHEL way of finding labels and their partitions
1191            if [ -x "/sbin/findfs" ]; then
1192                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1193            fi
1194   
1195            # 2nd try : blkid, the good way for all UUID except swap
1196            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1197                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1198                # For LVM FS it will give a /dev/dm-# which should then be converted
1199                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1200                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1201                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1202                    for dev in `ls /dev/mapper/*`; do
1203                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1204                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1205                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1206                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1207                            break
1208                        fi
1209                    done
1210                fi
1211            fi
1212   
1213            # 3th try, with vol_id
1214            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1215                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1216                for dev in $list_dev ; do
1217                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1218                    if [ "x$dev_exists" != "x" ]; then
1219                        actual_dev=$dev
1220                        break;
1221                    fi
1222                done
1223            fi
1224
1225            # 4th try, with dumpuuid (VMWare only ?) for swap
1226            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1227                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1228                for dev in $list_dev ; do
1229                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1230                    if [ "x$dev_exists" != "x" ]; then
1231                        actual_dev=$dev
1232                        break;
1233                    fi
1234                done
1235            fi
1236
1237            # Check if one of all those tries has known success
1238            if [ "x$actual_dev" != "x" ]; then
1239                current_partition=$actual_dev
1240            else
1241                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1242            fi
1243        else
1244            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1245            # they use symlinks in fstab unrelated to what is shown in mount !
1246            if [ _"$partition_mountpt" = _"" ]; then
1247                # set default in case we dont't find it
1248                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1249                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1250                            str_to_find_fmt_with=$tmpp
1251                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1252                            break;
1253                        fi
1254                done
1255            fi
1256        fi
1257
1258        # Detects noauto partitions not mounted and exclude them
1259        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1260        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1261                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1262            continue
1263        fi
1264        # Detects bind partitions and exclude them
1265        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1266                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1267            continue
1268        fi
1269
1270        # Look for devices which have to be excluded
1271        skip=0
1272        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1273            l=""
1274            list_of_devices="`mr-read-all-link $current_partition`"
1275            for d in $list_of_devices; do
1276                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1277            done
1278
1279            # Remove PVs from LVs excluded
1280            l="$l `GetPVsForLV $current_partition`"
1281
1282            # We want a single unique list
1283            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1284
1285            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1286                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1287                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1288                    skip=1
1289                    continue
1290                fi
1291            done
1292        fi
1293        if [ $skip -eq 1 ]; then
1294            continue
1295        fi
1296
1297        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1298        # Detects iso9660 ISO images and exclude them
1299        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1300                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1301            continue
1302        fi
1303        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1304        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1305        # the former is then a link to the latter, so we test whether
1306        # $current_partition is actually such a link or not and set
1307        # $current_lvolume accordingly. On Debian you may find more than one answer
1308        # so we remove the one corresponding to /dev/.static
1309        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1310        # principle is the same and we need to find the link to it as well.
1311        # Note that $current_lvolume may well be an
1312        # ordinary device. It is just to make sure that we feed the right value
1313        # into any of the LVM tools if possible.
1314
1315        current_lvolume="$current_partition"
1316        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1317            # .static dir are a Debian specificity
1318            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1319            echo $current_lvolume | grep -q ' '
1320            if [ $? -eq 0 ]; then
1321                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1322            fi
1323            # if it's not found, it may well be a real device such as a multipath one
1324            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1325            if [ _"$current_lvolume" = _"" ]; then
1326                current_lvolume="$current_partition"
1327            fi
1328        fi
1329        #
1330        # End of LVM device style variation code (other than $current_lvolume).
1331
1332        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1333            # Size computed via LVM not directly
1334            partition_size="lvm"
1335        else
1336            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1337            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1338            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1339                # Skip swap files
1340                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1341                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1342                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1343                [ "$partition_format" != "swap" ] && partition_format="swap"
1344                if [ "$partition_size" = "" ] ; then
1345                    totalsize=0
1346                    items=0
1347                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1348                        totalsize=$(($totalsize+$i))
1349                        items=$(($items+1))
1350                    done
1351                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1352                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1353                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1354                fi
1355            else
1356                partition_size=`SizeOfPartition $current_partition`
1357            fi
1358        fi
1359        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1360        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1361        if [ "$partition_mountpt" = "" ] ; then
1362            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1363                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1364                    partition_mountpt="raid"
1365                    partition_format="raid"
1366                else
1367                    partition_mountpt="lvm"
1368                    partition_format="lvm"
1369                fi
1370            fi
1371        fi
1372        psz=$partition_size
1373        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1374        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1375        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1376            partition_mountpt="image"
1377            old_partition_fmt=$partition_format
1378            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1379            partition_size=$(($partition_size+1)); # just in case
1380            if [ "$partition_format" = "Linux" ] ; then
1381                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1382                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1383                partition_format=$old_partition_fmt
1384            fi
1385        fi
1386
1387        if [ ! "$partition_mountpt" ] ; then
1388            LogFile "------- $FDISK -l $qq log ------------"
1389            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1390                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1391                [ "$partition_format" ] && break
1392            done
1393            LogFile "------- $FDISK log end ------------"
1394            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1395                partition_format="compaq"
1396            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1397                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1398                continue
1399            fi
1400        fi
1401        if [ "$redhat_label" ]; then
1402            label="$redhat_label"
1403        elif [ "$uuid" ]; then
1404            label="$uuid"
1405        fi
1406
1407        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1408        # in order to mount the root part e.g. in grub.
1409        # One way to solve this is to add the UUID now, if there wasn't one so it's
1410        # restored correctly
1411        if [ _"$label" = _"" ]; then
1412            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1413        fi
1414
1415        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1416        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1417        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1418        if [ "$current_partition" = "" ] ; then
1419            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1420        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1421            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1422                partition_mountpt=raid
1423                partition_format=raid
1424                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1425                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1426            else
1427                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1428            fi
1429        elif [ "$partition_format" = "" ] ; then
1430            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1431        elif [ "$partition_size" = "" ] ; then
1432            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1433        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1434            continue
1435        else
1436            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1437            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1438                partition_format="vfat"
1439            fi
1440            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1441            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1442        fi
1443    done
1444    LogAll "-----------------------------------" 
1445}
1446
1447CheckMountlist() {
1448    local file=$1
1449    # Coherency verification
1450    ML01=`cat $file | wc -l`
1451    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1452    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1453    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1454    if [ "$ML01" -ne "$ML1" ]; then
1455        LogFile "--------------------------------------------"
1456        LogAll "WARNING: Duplicate device entry in mountlist"
1457        LogFile "--------------------------------------------"
1458    fi
1459    if [ "$ML02" -ne "$ML2" ]; then
1460        LogFile "--------------------------------------------"
1461        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1462        LogFile "------------------------------------------------"
1463    fi
1464}
1465
1466
1467MakeISOErrors() {
1468
1469LogFile "----------- $ISO_CMD's errors --------------"
1470LogAll "Command invoked: $CMD ."
1471LogAll "$ISO_CMD returned the following errors:"
1472cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1473LogAll "ERROR: Failed to create ISO image."
1474}
1475
1476MakeISO() {
1477
1478LogAll "INFO: Generating ISO image."
1479(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1480if [ $? -ne 0 ] ; then
1481    # In case of UEFI handle differences in option handling
1482    if [ "$BOOT_TYPE" = "UEFI" ]; then
1483        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1484        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1485        if [ $? -ne 0 ] ; then
1486            # xorriso e.g.
1487            CMD=`echo $CMD | perl -p -e 's|-eltorito-platform 0xEF ||'`
1488            (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1489            if [ $? -eq 0 ] ; then
1490                LogAll "INFO: Invoking $CMD ."
1491                LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1492            else
1493                MakeISOErrors
1494        else
1495            LogAll "INFO: Invoking $CMD ."
1496            LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1497        fi
1498    else
1499        MakeISOErrors
1500    fi
1501else
1502    LogAll "INFO: Invoking $CMD ."
1503    LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1504fi
1505rm -f $MINDI_TMP/mkisofs.log
1506}
1507
1508MakeBootableDevice() {
1509
1510local target tbc retval part size mount_opt
1511
1512target="$1"
1513
1514rm -Rf $MINDI_TMP/target
1515mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1516
1517LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1518cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1519for i in memdisk memtest.bin memtest.img ; do
1520    j=$MINDI_LIB/$i
1521    k=$MINDI_TMP/target
1522    if [ -e "$j" ] ; then
1523        LogAll "INFO: Copying $j to $k"
1524        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1525        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1526        if [ _"$MONDO_SHARE" != _"" ]; then 
1527            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1528        fi
1529    fi
1530done
1531
1532retval=0
1533LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1534cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1535if [ $? -ne 0 ] ; then
1536    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1537    retval=$(($retval+1))
1538fi
1539LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1540cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1541if [ $? -ne 0 ] ; then
1542    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1543    retval=$(($retval+1))
1544fi
1545
1546# copy boot stuff now generated in PrepareDataDiskImage
1547if [ "$BOOT_TYPE" = "UEFI" ]; then
1548    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1549    tbc="EFI"
1550    # Also prepare a BIOS compatible boot
1551    if  [ "$target" = "ISO" ]; then
1552        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1553    fi
1554else
1555    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1556    tbc="syslinux"
1557    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1558        LogFile "----------- syslinux's conf --------------"
1559        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1560        LogFile "------------------------------------------"
1561    fi
1562    if  [ "$target" = "ISO" ]; then
1563        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1564        if [ $? -ne 0 ] ; then
1565            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1566            retval=$(($retval+1))
1567        fi
1568    fi
1569fi
1570
1571if [ "$ARCH" != "ia64" ] ; then
1572    if [ $KERNEL_IS_XEN = "yes" ]; then
1573        FindMboot32Binary
1574        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1575        if [ $? -ne 0 ] ; then
1576            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1577            retval=$(($retval+1))
1578        fi
1579        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1580        if [ $? -ne 0 ] ; then
1581            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1582            retval=$(($retval+1))
1583        fi
1584    fi
1585fi
1586
1587MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1588
1589if [ _"$MONDO_SHARE" != _"" ]; then 
1590    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1591    if [ $? -ne 0 ] ; then
1592        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1593        LogAll "       Please check the target directory."
1594        retval=$(($retval+1))
1595    fi
1596    if [ $KERNEL_IS_XEN = "yes" ]; then
1597        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1598        if [ $? -ne 0 ] ; then
1599            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1600            LogAll "       Please check the target directory."
1601            retval=$(($retval+1))
1602        fi
1603    fi
1604    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1605    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1606    if [ $? -ne 0 ] ; then
1607        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1608        LogAll "       Please check the target directory."
1609        retval=$(($retval+1))
1610    fi
1611    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1612    if [ $? -ne 0 ] ; then
1613        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1614        LogAll "       Please check the target directory."
1615        retval=$(($retval+1))
1616    fi
1617fi
1618
1619if [ -f "$MINDI_TMP/$MRCFG" ]; then
1620    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1621fi
1622
1623LogFile "----------- target dir content -----------"
1624LogFile "------------------------------------------"
1625ls -lR $MINDI_TMP/target >> $LOGFILE
1626LogFile "------------------------------------------"
1627LogFile "----------- target dir sizes -------------"
1628du -sk $MINDI_TMP/target/* >> $LOGFILE
1629LogFile "------------------------------------------"
1630
1631if [ "$retval" -ne "0" ] ; then
1632    LogFile "--------------------------------"
1633    LogFile "INFO: Size of $MINDI_TMP/target:"
1634    du -sk $MINDI_TMP/target/* >> $LOGFILE
1635    LogFile "--------------------------------"
1636    echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1637    sync
1638    umount $MINDI_TMP/target
1639    LogAll "ERROR: Problems while creating boot media."
1640    LogAll "       Please unload some of your modules and try again."
1641    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1642fi
1643
1644mkdir -p $MINDI_TMP/mpt
1645
1646if  [ "$target" = "USB" ]; then
1647    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1648    LogAll "INFO: Checking $USBDEVICE"
1649    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1650    if [ $? -ne 0 ]; then
1651        LogAll "ERROR: Unable to access $USBDEVICE"
1652        LogAll "       Make sure your USB device is plugged in"
1653        MindiExit -1
1654    fi
1655    # Some distro do auto mount at that point (Ubuntu)
1656    LogAll "INFO: Unmounting $USBPART just in case"
1657    sync
1658    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1659    if [ "$BOOT_TYPE" = "BIOS" ]; then
1660        # If your key has no MBR it may cause an issue
1661        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1662        if [ -r $MBRFILE ]; then
1663            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1664            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1665        else
1666            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1667            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1668        fi
1669    fi
1670    LogAll "INFO: Preparing $USBDEVICE"
1671    cat > $MINDI_TMP/fdisk.txt << EOF
1672d
1673d
1674d
1675d
1676n
1677p
16781
1679
1680
1681t
1682b
1683a
16841
1685w
1686EOF
1687    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1688    if [ $? -ne 0 ]; then
1689        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1690        LogAll "       Make sure your USB device is plugged in"
1691        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1692        MindiExit -1
1693    fi
1694    LogFile "fdisk build file"
1695    LogFile "----------------"
1696    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1697    LogFile "----------------"
1698    rm -f $MINDI_TMP/fdisk.txt
1699    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1700    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1701    # Calling kpartx in case devices were not created
1702    if [ -x "/sbin/kpartx" ]; then
1703        /sbin/kpartx -a $USBDEVICE
1704    fi
1705    # Some distro do auto mount at that point (Ubuntu)
1706    LogAll "INFO: Unmounting $USBPART just in case again"
1707    sync
1708    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1709    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1710    if [ "`which dmsetup`" != "" ]; then
1711        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1712        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1713            LogAll "INFO: Removing $block_id from device mapper."
1714            sleep 1
1715            dmsetup remove $block_id
1716        fi
1717    fi
1718    part=$USBPART
1719    mount_opt=""
1720else
1721    # ISO image
1722    part=$MINDI_TMP/mindi-bootroot.img
1723    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1724    # Adds 10 MB to allow for additional space
1725    size=$(($size+10000))
1726    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1727    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1728    mount_opt="-o loop"
1729fi
1730
1731LogAll "INFO: Creating a vfat filesystem on $part"
1732
1733mkfs.vfat $part 2>&1 >> $LOGFILE
1734if [ $? -ne 0 ]; then
1735    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1736    if  [ "$target" = "USB" ]; then
1737        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1738        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1739    fi
1740    MindiExit -1
1741fi
1742if  [ "$target" = "ISO" ]; then
1743    if [ "$BOOT_TYPE" = "BIOS" ]; then
1744        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1745        # and run after the formating for versions > 6 it seems
1746        syslinux $part >> $LOGFILE 2>> $LOGFILE
1747    fi
1748fi
1749LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1750mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1751if [ $? -ne 0 ]; then
1752    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1753    if  [ "$target" = "USB" ]; then
1754        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1755        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1756    fi
1757    MindiExit -1
1758fi
1759
1760LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1761mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1762if [ $? -ne 0 ] ; then
1763    LogFile "--------------------------------"
1764    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1765    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1766    LogFile "--------------------------------"
1767    sync
1768    umount $MINDI_TMP/mpt
1769    LogAll "ERROR: Problems while creating boot media."
1770    LogAll "       Please unload some of your modules and try again."
1771    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1772fi
1773
1774if  [ "$target" = "ISO" ]; then
1775    if [ "$ARCH" != "ia64" ]; then
1776        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1777    fi
1778    # ISO
1779    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1780        CMD="$ISO_CMD $ISO_OPT"
1781        MakeISO
1782    else
1783        if [ "$ARCH" = "ia64" ]; then
1784            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1785        else
1786            # UEFI
1787            echo "$CMD" | grep -q "xorriso"
1788            if [ $? -eq 0 ]; then
1789                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
1790            else
1791                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1792            fi
1793        fi
1794    fi
1795fi
1796
1797# Avoids graphical tool to keep the FS mounted
1798sync
1799umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1800
1801if  [ "$target" = "ISO" ]; then
1802    cp $part $MINDI_CACHE
1803    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
1804        # We just need the EFI dir and the boot image for this case
1805        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1806        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1807        # We need again the kernel+initrd at the root for UEFI boot at least
1808        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1809        # We need the boot image now and what mindi needs at restore time as well
1810        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1811        # Avoids graphical tool to keep the FS mounted
1812        sync
1813        umount $MINDI_TMP/mpt2
1814        LogFile "----------- target dir content -----------"
1815        LogFile "------------------------------------------"
1816        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1817        LogFile "------------------------------------------"
1818        MakeISO
1819    fi
1820else
1821    # USB
1822    if [ "$ARCH" != "ia64" ] ; then
1823        syslinux -v 2>&1 | grep -q 4.02
1824        if [ $? -eq 0 ]; then
1825            # This buggy version of syslinux requires a call to --stupid and not -s
1826            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1827            res=$?
1828        else
1829            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1830            res=$?
1831        fi
1832        if [ $res -ne 0 ] ; then
1833            LogAll "----------- syslinux's errors --------------"
1834            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1835            LogAll "------------------------------------------"
1836            LogAll "ERROR: Failed to create USB image."
1837        else
1838            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1839        fi
1840        rm -f $MINDI_TMP/syslinux.log
1841    else
1842        LogAll "ERROR: No USB boot support for ia64"
1843        MindiExit -1
1844    fi
1845fi
1846}
1847
1848
1849OfferToMakeBootableUSB() {
1850
1851local i files
1852
1853if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1854    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1855    read i
1856    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1857    if [ "$USBDEVICE" = "" ]; then
1858        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1859        read dev
1860        USBDEVICE=$dev
1861    fi
1862    echo "WARNING: This will erase all content on $USBDEVICE"
1863    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1864    read i
1865    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1866else
1867    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1868        Die "No USBDEVICE environment variable declared, aborting"
1869    fi
1870fi
1871USBPART="${USBDEVICE}1"
1872
1873MakeBootableDevice USB
1874}
1875
1876
1877OfferToMakeBootableISO() {
1878
1879local i files
1880
1881if [ -z "$ISO_CMD" ]; then
1882    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1883    return
1884fi
1885
1886if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1887    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1888    read i
1889    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1890fi
1891
1892MakeBootableDevice ISO
1893
1894}
1895
1896
1897MakeMessageFile() {
1898   
1899    if [ -x "/bin/lsb_release" ]; then
1900        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1901    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1902        DESC="Arch Linux"
1903        if [ -r /var/log/pacman.log ]; then
1904            # there are no releases but we can get the last system upgrade
1905            # Output example:   Arch Linux [2011-03-03 01:39]
1906            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1907        fi
1908    elif [ -x "/etc/os-release" ]; then
1909        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1910    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1911        # For pb >= 0.9.8
1912        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1913    elif [ -r /etc/issue.net ]; then
1914        DESC=`head -1 /etc/issue.net`
1915    elif [ -r /etc/issue ]; then
1916        DESC=`head -1 /etc/issue`
1917    else
1918        DESC="Unknown desc"
1919    fi
1920    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1921    if [ _"$MONDO_SHARE" != _"" ]; then
1922        if [ "$CDRECOVERY" != "yes" ] ; then
1923            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1924                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1925                echo -en "$BOOT_MEDIA_MESSAGE"
1926            elif [ ! "$MINDI_TMP" ] ; then
1927                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1928                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1929                    echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1930                fi
1931            else
1932                echo -en "$BOOT_MEDIA_MESSAGE"
1933            fi
1934        else
1935            echo -en "\
1936To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1937CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1938        fi
1939    fi
1940
1941    # Also create the other help screens
1942    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1943    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1944    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1945}
1946
1947
1948MakeBootConfFile() {
1949    local options i ooo
1950    options=""
1951    # Type of boot file (elilo or syslinux/isolinux)
1952    type=$1
1953    if [ "$type" = "elilo" ] || [ "$type" = "grub2" ]; then
1954        sep="="
1955        sepdef="="
1956    else
1957        sep=" "
1958        sepdef=" "
1959    fi
1960
1961    # Generic header for conf file
1962    if [ "$type" = "elilo" ]; then
1963        echo -en "prompt\n"
1964    elif [ "$type" = "grub" ]; then
1965        echo -en "pause Press a key when ready to restore\n"
1966    elif [ "$type" = "grub2" ]; then
1967        echo -en "set "
1968    else
1969        # syslinux family
1970        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1971    fi
1972
1973    # Compute which default option to boot from
1974    echo -en "default${sepdef}"
1975    if [ "$CDRECOVERY" = "yes" ] ; then
1976        if [ "$type" = "grub" ]; then
1977            # TODO: Which num ???
1978            echo -en "0\n"
1979        else
1980            echo -en "RESTORE\n"
1981        fi
1982    # In case it's mondoarchive
1983    elif [ _"$MONDO_SHARE" != _"" ]; then
1984        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1985            if [ "$type" = "grub" ]; then
1986                echo -en "3\n"
1987            else
1988                echo -en "iso\n"
1989            fi
1990        else
1991            if [ "$type" = "grub" ]; then
1992                echo -en "1\n"
1993            else
1994                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1995            fi
1996        fi
1997    else
1998        if [ "$type" = "grub" ]; then
1999            echo -en "0\n"
2000        else
2001            echo -en "expert\n"
2002        fi
2003    fi
2004
2005    # Handle timeout
2006    if [ "$type" = "grub2" ]; then
2007        seppref="set "
2008    else
2009        seppref=""
2010    fi
2011    if [ "$CDRECOVERY" = "yes" ] ; then
2012        echo -en "${seppref}timeout${sep}10000\n"
2013    else
2014        echo -en "${seppref}timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
2015    fi
2016    echo -en "\n"
2017
2018    # prepare which labels will be generated
2019    if [ "$CDRECOVERY" = "yes" ] ; then
2020        options="RESTORE expert"
2021    else
2022        if [ _"$MONDO_SHARE" != _"" ]; then
2023            options="interactive expert compare iso nuke isonuke"
2024        else
2025            options="expert"
2026        fi
2027    fi
2028
2029    # Generate rest of conf file
2030    for i in $options ; do
2031        ooo=$i
2032        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2033        if [ "$type" = "elilo" ]; then
2034            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2035        elif [ "$type" = "grub" ]; then
2036            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2037        elif [ "$type" = "grub2" ]; then
2038            if [ "$BOOT_TYPE" = "UEFI" ]; then
2039                lorder="linuxefi"
2040                iorder="initrdefi"
2041            else
2042                lorder="linux"
2043                iorder="initrd"
2044            fi
2045            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2046        else
2047            ps="/"
2048            if [ $KERNEL_IS_XEN = "no" ]; then
2049                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2050            else
2051                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2052            fi
2053        fi
2054        echo -en "$outstr"
2055    done
2056    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2057        if [ "$type" = "elilo" ]; then
2058            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2059            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2060        elif [ "$type" = "grub" ]; then
2061            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2062        elif [ "$type" = "grub2" ]; then
2063            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2064        else
2065            ps="/"
2066            if [ "$type" = "syslinux" ]; then
2067                ps=""
2068            fi
2069            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2070            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2071        fi
2072    fi
2073}
2074
2075ParseModprobeForIncludes() {
2076local MODPROBE_CONF mpincfile includes include
2077
2078MODPROBE_CONF=/etc/modprobe.conf
2079mpincfile=$1
2080touch $mpincfile
2081if [ -a $MODPROBE_CONF ]; then
2082    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2083    if [ -n "$includes" ]; then
2084        for include in $includes
2085        do
2086            if [ -a "$include" ]; then
2087                echo $include >> $mpincfile
2088            fi
2089        done
2090    fi
2091fi
2092}
2093
2094PrepareBootDir() {
2095
2096        local detect
2097# Needs a bigdir variable setup before calling it
2098
2099    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2100    # to get it on the media (in addition to the boot part
2101    # and also to support UEFI boot mechanism
2102    if [ "$boottype" != "" ]; then
2103        detect="no"
2104    else
2105        detect="yes"
2106        boottype=syslinux
2107    fi
2108    bootdir=$bigdir/$boottype
2109    bootconf="$bootdir/$boottype.cfg"
2110    mkdir -p $bootdir
2111    FindLdlinux32Binary
2112
2113    if [ "$BOOT_TYPE" != "BIOS" ]; then
2114        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2115            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2116            MindiExit -1
2117        fi
2118
2119        mountefi=0
2120        # EFI or UEFI
2121        # TODO: names are hard-coded for now
2122        if [ "$BOOT_TYPE" = "UEFI" ]; then
2123            # UEFI
2124            efidir=$bigdir/EFI/BOOT
2125            # Auto-detection if needed
2126            if [ $detect = "yes" ]; then
2127
2128                # mount /boot/efi if needed
2129                df -T | grep /boot/efi | grep -qE 'vfat'
2130                if [ $? -ne 0 ]; then
2131                    mount /boot/efi
2132                    if [ $? -ne 0 ]; then
2133                        echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2134                        MindiExit -1
2135                    fi
2136                    mountefi=1
2137                fi
2138
2139                # On RHEL6 grub works
2140                dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2141                dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2142                if [ $dname = "rhel" || $dname = "centos" ] && [ $dver = "6" ]; then
2143                    boottype=grub
2144                elif [ $dname = "rhel" || $dname = "centos" ] && [ $dver = "7" ]; then
2145                    boottype=grub2
2146                elif [ $dname = "debian" ] && [ $dver = "8" ]; then
2147                    boottype=grub2
2148                else
2149                    # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2150                    boottype=syslinux
2151                fi
2152            fi
2153            if [ "$boottype" = "syslinux" ]; then
2154                if [ ! "$bootbin" ]; then
2155                    FindSyslinux64EFI
2156                    bootbin=$SYSLINUX64EFI
2157                fi
2158                bootconf="$efidir/syslinux.cfg"
2159            elif [ "$boottype" = "grub" ]; then
2160                if [ ! "$bootbin" ]; then
2161                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2162                fi
2163                bootconf="$efidir/BOOTX64.conf"
2164            elif [ "$boottype" = "grub2" ]; then
2165                if [ ! "$bootbin" ]; then
2166                    bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2167                fi
2168                bootconf="$efidir/grub.cfg"
2169            fi
2170
2171            # Depending on the arch, the target boot file is different
2172            if [ "$ARCH" = "x86_64" ] ; then
2173                tgbin="BOOTX64.efi"
2174            elif [ "$ARCH" = "armv8" ]; then
2175                tgbin="BOOTAA64.efi"
2176            else
2177                # i?386
2178                tgbin="BOOTIA32"
2179            fi
2180        else
2181            # EFI
2182            efidir=$bootdir
2183            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2184            tgbin=$bootbin
2185            boottype=elilo
2186            bootconf="$efidir/elilo.conf"
2187        fi
2188        LogAll "INFO: Found $boottype boot type"
2189        mkdir -p $efidir
2190        cp $bootbin $efidir/$tgbin
2191
2192        if [ $mountefi -eq 1 ]; then
2193            umount /boot/efi 2>&1 > /dev/null
2194        fi
2195
2196        if [ $boottype = "syslinux" ]; then
2197            FindLdlinuxe64Binary
2198            if [ -e "$LDLINUXE64" ]; then
2199                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2200                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2201                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy libutil.c32 to $efidir). Did you run out of disk space?"
2202                if [ -e $LDLINUXE64/../isolinux.c32 ]; then
2203                    cp $LDLINUXE64/../isolinux.c32 $efidir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $efidir). Did you run out of disk space?"
2204                fi
2205            fi
2206        fi
2207        # tgdir for syslinux
2208        tgdir=$bigdir/EFI
2209    else
2210        # tgdir for syslinux
2211        tgdir=$bootdir
2212    fi
2213    # In all cases prepare syslinux content for BIOS mode
2214    # so that we can have multi boot mode media BIOS+UEFI
2215    # Useful for syslinux 5.x
2216    if [ -e "$LDLINUXC32" ]; then
2217        LogFile "INFO: Copying $LDLINUXC32 to $tgdir"
2218        cp $LDLINUXC32 "$tgdir" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $tgdir. Did you run out of disk space?"
2219    fi
2220    if [ -e $LDLINUXC32/../isolinux.c32 ]; then
2221        LogFile "INFO: Copying isolinux.c32 to $tgdir"
2222        cp $LDLINUXC32/../isolinux.c32 $tgdir 2>> $LOGFILE || Die "Cannot copy isolinux.c32 to $tgdir). Did you run out of disk space?"
2223    fi
2224
2225    # Here we need to know the ramdisk_size
2226    size_of_all_tools=`du -sk $bigdir | cut -f1`
2227    export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2228    LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2229
2230    MakeBootConfFile $boottype > $bootconf
2231    LogFile "Boot Conf file $bootconf content is:"
2232    LogFile "------------------------------------"
2233    cat $bootconf >> $LOGFILE
2234    LogFile "------------------------------------"
2235    if [ "$BOOT_TYPE" = "UEFI" ]; then
2236        # Also generate the syslinux conf
2237        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2238        LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2239        LogFile "---------------------------------------------------"
2240        cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2241        LogFile "---------------------------------------------------"
2242    fi
2243
2244}
2245
2246PrepareAllTar() {
2247    echo -en "INFO: Tarring and zipping the data content..."
2248    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2249    LogFile "Size of the data content"
2250    LogFile "------------------------"
2251    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2252    LogFile "------------------------"
2253    echo -e "$DONE"
2254
2255    [ "$bigdir" != "/" ] && rm -rf $bigdir
2256}
2257
2258PrepareDataDiskImages() {
2259    local needlist bigdir diskdir res i j k lines lfiles includefile
2260
2261    rm -f $MINDI_CACHE/mindi.iso
2262    needlist=$MINDI_TMP/what-we-need.txt
2263    bigdir=$MINDI_TMP/bigdir
2264    mkdir -p $bigdir/usr/bin
2265    mkdir -p $bigdir/usr/sbin
2266    includefile=$MINDI_TMP/$$.includefile.txt
2267
2268    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2269    if [ -e "$DEPLIST_FILE" ]; then
2270        lfiles="$DEPLIST_FILE $lfiles"
2271    fi
2272    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2273    ParseModprobeForIncludes $includefile
2274    lines=$(($lines+`cat $includefile | wc -l`))
2275    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2276    res=$?
2277    rm -f $includefile
2278    ListKernelModulePaths >> $needlist
2279    if [ "$res" -ne "0" ] ; then
2280        Die "You have $res files present in dependency list\nbut absent from filesystem."
2281    fi
2282    mkdir -p $bigdir/tmp
2283    if [ _"$MONDO_SHARE" != _"" ]; then
2284        # TODO: no reason to have the cfg file stored twice
2285        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2286        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2287    fi
2288
2289    # Needs to be done after the MRCFG creation
2290    FindAndAddUserKeyboardMappingFile
2291
2292    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2293    DropOptimizedLibraries $needlist $bigdir
2294    echo -en "INFO: Assembling dependency files"
2295
2296    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2297    rm -f $needlist
2298    echo -e "$DONE"
2299
2300    # also copy io.sys and msdos.sys, if we can find them
2301    for i in `mount | cut -d' ' -f3` ; do
2302        for j in io.sys msdos.sys ; do
2303            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2304        done
2305    done
2306
2307    # master boot record, too
2308    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2309    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2310        LogAll "INFO: Backing up $i's MBR"
2311        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2312        sleep 1
2313        sync
2314        j=$i
2315        [ -h "$j" ] && j=`readlink -f $j`
2316        LogAll "INFO: Creating /dev/boot_device ($j)"
2317        mkdir -p $bigdir/dev
2318        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2319    fi
2320
2321    # Get terminfo content
2322    ti="usr/share/terminfo/l"
2323    if [ -d /$ti ]; then
2324        mkdir -p $bigdir/$ti
2325        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2326    fi
2327    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2328        cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2329        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2330        cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2331    fi
2332    if [ -d "/lib/dev-state" ]; then 
2333        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2334    fi
2335    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2336    MakeMountlist $MINDI_TMP/mountlist.txt
2337    CheckMountlist $MINDI_TMP/mountlist.txt
2338    mkdir -p $bigdir/tmp
2339    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2340    if [ _"$MONDO_SHARE" != _"" ]; then
2341        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2342    fi
2343    if [ $LVM != "false" ]; then
2344        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2345        if [ $? -ne 0 ]; then
2346            LVM="false"
2347            rm -f $bigdir/tmp/i-want-my-lvm
2348        else
2349            LogFile "Your i-want-my-lvm file content is:"
2350            LogFile "-----------------------------------"
2351            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2352            LogFile "-----------------------------------"
2353        fi
2354    fi
2355    LogFile "INFO: Your mountlist.txt file content is:"
2356    LogFile "-----------------------------------"
2357    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2358    LogFile "-----------------------------------"
2359
2360    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2361    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2362    if [ _"$MONDO_SHARE" != _"" ]; then
2363        for q in filelist.full.gz biggielist.txt ; do
2364            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2365            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2366        done
2367    fi
2368
2369    PrepareBootDir
2370    PrepareAllTar
2371}
2372
2373
2374Prompt() {
2375    echo -en "$1"
2376    read line
2377}
2378
2379
2380ReadLine() {
2381    local i incoming
2382    read incoming
2383    i=0
2384    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2385        i=$(($i+1))
2386        read incoming
2387    done
2388    echo "$incoming"
2389}
2390
2391
2392SizeOfPartition() {
2393    local devpath drive res stub
2394    device=$1
2395    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2396        Die "Cannot find $device's size - is your /etc/fstab sane?"
2397    fi
2398    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2399        res=`SizeOfRaidPartition $device`
2400        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2401        echo "$res"
2402        return 0
2403    fi
2404    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2405    res=`$FDISK -s $device 2>> $LOGFILE`
2406    # end patch
2407    # take only the first in case of multiple mount (cifs, nfs, ...)
2408    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2409    [ "$res" = "" ] && res="-1"
2410    echo $res
2411    return 0
2412}
2413
2414
2415SizeOfRaidPartition() {
2416    local real_dev smallest_size silly tmp
2417
2418    silly=999999999
2419    smallest_size=$silly
2420
2421    for real_dev in `GetRaidDevMembers $1` ; do
2422        tmp=`SizeOfPartition $real_dev`
2423        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2424    done
2425
2426    if [ "$smallest_size" = "$silly" ] ; then
2427        echo "-1"
2428        return 1
2429    else
2430        echo "$smallest_size"
2431        return 0
2432    fi
2433}
2434
2435
2436StripExecutable()
2437{
2438    local tmpfile
2439
2440    tmpfile=$MINDI_TMP/stripped.$$.dat
2441    [ -d "$1" ] || [ -h "$1" ] && return
2442    cp -f $1 $tmpfile 2>> $LOGFILE
2443    strip $tmpfile 2> /dev/null
2444    if [ $? -eq 0 ] ; then
2445        cp -f $tmpfile $1 2>> $LOGFILE
2446        LogFile "INFO: Stripped binary $2"
2447    fi
2448    rm -f $tmpfile
2449}
2450
2451KernelVer() {
2452        local fkern_ver fname
2453
2454        fname=$1
2455        file $fname | grep -q gzip
2456        if [ $? -eq 0 ] ; then
2457            # Used by ia64
2458            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2459        else
2460            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2461        fi
2462        echo "$fkern_ver"
2463}
2464
2465
2466# WARNING: This function should just echo the final result !!!
2467#
2468TryToFindKernelPath() {
2469    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2470
2471    we_want_version=$KERVERRUN
2472    possible_kernels=""
2473    duff_kernels=""
2474    output=""
2475
2476    if [ "$ARCH" = "ia64" ] ; then
2477       root="/boot/efi/efi"
2478    else
2479       root="/"
2480    fi
2481    # See if we're booted from a Xen kernel
2482    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2483    if [ -f /proc/xen/capabilities ]; then
2484        # It's a Xen kernel
2485        KERNEL_IS_XEN="yes"
2486        LogFile "INFO: It's a Xen kernel..."
2487    fi
2488
2489    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2490        [ ! -e "$fname" ] && continue
2491        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2492        fkern_ver=`KernelVer $fname`
2493        [ "$fkern_ver" = "" ] && continue
2494        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2495        [ -f "$fname" ] || continue
2496        [ -h "$fname" ] && continue
2497        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2498        file $fname | grep -q gzip
2499        if [ $? -eq 0 ] ; then
2500            # Used by ia64
2501            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2502                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2503                duff_kernels="$fname $duff_kernels"
2504            else
2505                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2506                possible_kernels="$fname $possible_kernels"
2507            fi
2508        else
2509            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2510                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2511                duff_kernels="$fname $duff_kernels"
2512            else
2513                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2514                possible_kernels="$fname $possible_kernels"
2515            fi
2516        fi
2517    done
2518    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2519        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
2520    fi
2521    if [ ! "$possible_kernels" ] ; then
2522        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2523        possible_kernels="$duff_kernels"
2524        if [ ! "$possible_kernels" ] ; then
2525            LogAll "INFO: Sorry, no duff kernels either"
2526        else
2527            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2528            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2529        fi
2530    fi
2531    if [ $KERNEL_IS_XEN = "yes" ]; then
2532        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2533        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2534    fi
2535    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2536    noof_kernels=`CountItemsIn "$possible_kernels"`
2537    if [ "$noof_kernels" -eq "0" ] ; then
2538        LogAll "Could not find your kernel."
2539        if [ -e "/boot/vmlinuz" ] ; then
2540            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2541            output=/boot/vmlinuz
2542        else
2543            output=""
2544        fi
2545    elif [ "$noof_kernels" -eq "1" ] ; then
2546        kp=`echo "$possible_kernels" | sed s/' '//`
2547        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2548        output="$kp"
2549    else
2550        for i in $possible_kernels ; do
2551            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2552                LogAll "INFO: OK, I used my initiative and found that "
2553                LogAll "INFO: $i is probably your kernel. "
2554                output="$i"
2555                break
2556            fi
2557        done
2558        if [ ! -n "$output" ]; then
2559            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2560                output=/boot/vmlinuz
2561                LogFile "INFO: Schlomo, this one's for you."
2562            else
2563                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2564                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2565                LogFile "INFO: $possible_kernels"
2566                output=""
2567            fi
2568        fi
2569    fi
2570    if [ $KERNEL_IS_XEN = "yes" ]; then
2571        if [ "$noof_xenkernels" -eq "0" ]; then
2572            xenkernelpath=""
2573        elif [ "$noof_xenkernels" -eq "1" ]; then
2574            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2575            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2576        else
2577            for i in $possible_xenkernels ; do
2578                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2579                    LogFile "INFO: OK, I used my initiative and found that "
2580                    LogFile "INFO: $i is probably your Xen kernel. "
2581                    xenkernelpath="$i"
2582                    break
2583                fi
2584            done
2585            if [ ! -n "$xenkernelpath" ]; then
2586                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2587                if [ ! -n "$new_possible_xenkernels" ]; then
2588                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2589                    LogFile "INFO: Using $xenkernelpath"
2590                else
2591                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2592                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2593                    LogFile "INFO: $possible_xenkernels"
2594                    output=""
2595                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2596                    LogFile "INFO: Using $xenkernelpath"
2597                fi
2598            fi
2599        fi
2600        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2601            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2602        fi
2603    fi
2604    #LogAll "TryToFindKernelPath found $output"
2605    echo "$output"
2606}
2607
2608
2609MakeBootInitFile() {
2610    local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2611
2612    tgz_dir_fname=$1
2613    rdz_fname=$2
2614    kernelsize=$3
2615    tempfile=$MINDI_TMP/temp.rd
2616    res=0 
2617    templog=$MINDI_TMP/$$.log
2618    > $templog
2619
2620    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2621    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2622    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2623    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2624    mkdir -p $mountpoint
2625    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2626
2627    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2628    for d in bin sbin lib lib64; do
2629        if [ -h "/$d" ]; then
2630            thelink=`readlink /$d`
2631            mkdir -p $mountpoint/$thelink || LogAll "ERROR: Unable to create $thelink in $mountpoint."
2632            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2633            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2634                rmdir $mountpoint/$d
2635            fi
2636            if [ ! -h $mountpoint/$d ]; then
2637                rm -f $mountpoint/$d 2> /dev/null
2638                (cd $mountpoint ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2639            fi
2640        fi
2641    done
2642
2643    LogFile "INFO: what is now in $mountpoint"
2644    ls -al $mountpoint >> $LOGFILE
2645   
2646    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2647    # copy from rootfs into mountpoint
2648    LogAll "INFO: Copying Mindi files onto $mountpoint"
2649    for f in $tgz_dir_fname/*; do 
2650        if [ ! -r $f ]; then
2651            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2652        else
2653            cp -af $f $mountpoint 2>&1 >> $LOGFILE
2654        fi
2655    done
2656    (cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2657    (cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2658
2659    (cd $mountpoint/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2660
2661    for w in insmod.static insmod.static.old ; do
2662        s=`which $w 2> /dev/null`
2663        if [ -e "$s" ] ; then
2664            tar cf - -C / $s 2> /dev/null | (cd $mountpoint ; tar xf -)
2665        fi
2666    done
2667
2668    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2669   
2670    # Copy of files mandatory for ssh to automate mount if sshfs is used
2671    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2672    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2673    cat > $mountpoint/tmp/myssh << EOF
2674ssh -o StrictHostKeyChecking=no $*
2675EOF
2676    chmod 755 $mountpoint/tmp/myssh
2677
2678    # Copy of files mandatory for ld.so
2679    cp -a /etc/ld.so.c* $mountpoint/etc
2680
2681    # Handle the case where busybox and mount are dynamically linked
2682    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2683    if [ $? -eq 0 ]; then
2684        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2685        rm -f $mountpoint/bin/mount
2686    fi
2687
2688    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2689    echo -en "INFO: Gathering dependencies of required files..."
2690    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2691    lines=`cat $DEPLIST_DIR/minimal.conf | grep -vE " *#.*|^#" | sort -u`
2692    noof_lines=`echo $lines | wc -w`
2693    progress=0
2694    for f in $lines; do
2695        if [ -d $f ]; then
2696            for g in `find $f`; do 
2697                echo $g >> $MINDI_TMP/minimal.lis
2698                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2699            done
2700        else 
2701            if [ -r $f ]; then
2702                echo $f >> $MINDI_TMP/minimal.lis
2703                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2704            fi
2705        fi
2706        progress=$(($progress+1))
2707        LogProgress $progress $noof_lines
2708    done
2709    echo -e "$DONE"
2710    echo -en "INFO: Processing all dependencies links..."
2711    lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
2712    noof_lines=`echo $lines | tr ' ' '\n' | wc -l`
2713    progress=0
2714    for f in $lines; do
2715        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2716        progress=$(($progress+1))
2717        LogProgress $progress $noof_lines
2718    done
2719    echo -e "$DONE"
2720    # Initial / are trucated by tar
2721    finallist=""
2722    # Remove directories from the list, as tar/cp will create them anyway
2723    # and it may hurt if /lib is in it as on Debian/Ubuntu
2724    # recent bash says that -d is true for a link to a dir !
2725    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2726        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2727            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2728            if [ ! -e "$mountpoint/$f" ]; then
2729                finallist="$finallist $f"
2730            fi
2731        fi
2732    done
2733    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2734
2735    fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2736    LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
2737    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogAll "WARNING: Problem in minimal analysis" $templog
2738
2739    # In case target /bin dir still doesn't exist, create it before using it
2740    if [ ! -d $mountpoint/bin ]; then
2741        mkdir -p $mountpoint/bin
2742    fi
2743
2744    # For older distributions expecting /sbin/init provides it
2745    if [ ! -e "$mountpoint/sbin/init" ]; then
2746        (cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2747    fi
2748
2749    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2750    (cd $mountpoint ; ln -sf /bin/bash bin/sh)
2751    LogFile "INFO: Using bash as default shell"
2752
2753    # Avoids an issue on some distro (RHEL5)
2754    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2755
2756    # Management of udev (which includes modprobe in rules)
2757    ps auxww | grep -v grep | grep -qw udevd
2758    if [ $? -eq 0 ]; then
2759        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2760        LogFile "INFO: udev device manager found"
2761        tar cf - -C / /etc/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /etc/udev analysis" $templog
2762        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2763        rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2764        # Do not do it if it's a link (Ubuntu 64 bits #503)
2765        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2766            tar cf - -C / /lib64/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2767        fi
2768        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2769            tar cf - -C / /lib32/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2770        fi
2771        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2772            tar cf - -C / /lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib/udev analysis" $templog
2773        fi
2774        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2775            tar cf - -C / /usr/lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2776        fi
2777        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2778            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2779            lis=""
2780            # Get only the files which exist in that list
2781            # and potentially their symlink structure
2782            for i in $lis2; do
2783                if [ -h $i ]; then
2784                    j=$i
2785                    while [ -h $j ]; do
2786                        lis="$lis $j"
2787                        j=`readlink -f $j`
2788                    done
2789                    lis="$lis $j"
2790                elif [ -d $i ]; then
2791                    lis3="$lis3 $i"
2792                elif [ -f $i ]; then
2793                    lis="$lis $i"
2794                fi
2795            done
2796            # And their deps
2797            LocateDeps $lis > $MINDI_TMP/udev.lis
2798            for i in $lis; do
2799                if [ "`echo $i | cut -c1`" = "/" ]; then
2800                    j=`echo $i | cut -c2-`
2801                    [ "$j" != "" ] && rm -f $mountpoint/$j
2802                fi
2803                echo "$i" >> $MINDI_TMP/udev.lis
2804            done
2805            finallist=""
2806            # Remove directories from the list, as tar/cp will create them anyway
2807            # and it may hurt if /lib is in it as on Debian/Ubuntu
2808            # recent bash says that -d is true for a link to a dir !
2809            for f in `sort -u $MINDI_TMP/udev.lis`; do
2810                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2811                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2812                    if [ ! -e "$mountpoint/$f" ]; then
2813                        finallist="$finallist $f"
2814                    fi
2815                fi
2816            done
2817            # But adds the directory useful for udev in $lis3
2818            fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2819            LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
2820            cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog  || LogAll "WARNING: Problem in udev.lis analysis" $templog
2821            rm -f $MINDI_TMP/udev.lis
2822        else
2823            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2824            LogAll "         mindi will use static devices which may cause problems"
2825            rm -f $mountpoint/tmp/USE-UDEV
2826        fi
2827    fi
2828
2829    # Management of potential HW info (ProLiant only at the moment)
2830    rm -rf $MINDI_CACHE/bkphw
2831    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2832    if [ -d $MINDI_CACHE/bkphw ]; then
2833        LogAll "INFO: Hardware Information found and saved ..."
2834        cp -rp $MINDI_CACHE/bkphw $mountpoint
2835        if [ -f $MINDI_CACHE/tools.files ]; then
2836            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2837            LocateDeps $lis > $MINDI_TMP/tools.lis
2838            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
2839        fi
2840        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2841            mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2842            chmod 755 $mountpoint/mindi-rsthw
2843        fi
2844        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2845    fi
2846
2847    # Management of perl scripts delivered needed at restore time
2848    LogAll "INFO: Analyzing perl modules dependencies..."
2849    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2850    LogFile "DBG4: Perl Modules found:"
2851    LogFile "-------------------------"
2852    cat $MINDI_TMP/perl.lis >> $LOGFILE
2853    LogFile "-------------------------"
2854    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
2855
2856    for w in cdrom groovy-stuff ; do
2857        mkdir -p mnt/$w
2858    done
2859
2860    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
2861
2862    needed_modules=""
2863    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2864
2865    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2866        # For PXE boot
2867        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2868    fi
2869    for i in $DENY_MODS; do
2870        LogFile "INFO: Removing $i from the list of modules to load"
2871        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2872    done
2873
2874    if [ "${kernelname}" != "" ]; then
2875        needed_modules_path=lib/modules/${kernelname}
2876        mkgmopt="-k ${kernelname}"
2877    else
2878        needed_modules_path=lib/modules/$KERVERRUN
2879        mkgmopt="-k $KERVERRUN"
2880    fi
2881
2882    [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2883    LogAll "INFO: Analyzing kernel modules dependencies..."
2884    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2885
2886    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2887    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
2888
2889    # Uncompress modules if not using udev and native modprobe
2890    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2891        for i in $needed_modules; do
2892            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2893                gunzip -f $mountpoint/$i
2894            fi
2895            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2896                bunzip2 -f $mountpoint/$i
2897            fi
2898            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2899                unxz -f $mountpoint/$i
2900            fi
2901            LogFile "INFO: Uncompressing $i"
2902        done
2903    fi
2904
2905    # Also copy modules.* in case of udev so that normal modprobe works
2906    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
2907
2908    # Copy FW in case some drivers needs it
2909    for d in "/lib" "/usr/lib"; do
2910        if [ -d "$d/firmware" -a ! -h $d ]; then
2911            cp -a "$d/firmware" "$mountpoint/$d"
2912        fi
2913    done
2914
2915    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2916    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2917        if [ -d "$d/multipath" -a ! -h $d ]; then
2918            cp -a "$d/multipath" "$mountpoint/$d"
2919        fi
2920    done
2921
2922    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2923    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2924
2925    # Copy an additional ProLiant tool for OBDR support
2926    if [ -f $MINDI_TMP/OBDR ]; then
2927        found=0
2928        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2929            mkdir -p $mountpoint/usr/bin
2930            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2931            LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2932            found=1
2933        fi
2934        if [ -x /usr/bin/sg_wr_mode ]; then
2935            mkdir -p $mountpoint/usr/bin
2936            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2937            LocateDeps $lis > $MINDI_TMP/obdr.lis
2938            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
2939            LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2940            found=1
2941        fi
2942        if [ $found -eq 0 ]; then
2943            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2944            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2945        fi
2946    fi
2947
2948    if [ ! -e "/sbin/devfsd" ]; then
2949        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2950        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2951        rm -f $mountpoint/sbin/devfsd
2952    fi
2953    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2954    if [ _"$MONDO_SHARE" != _"" ]; then
2955        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2956        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2957        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2958        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2959        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2960    fi
2961
2962    # Create module list to load at restore time
2963    rm -f $mountpoint/tmp/modules
2964    for m in $CDROM_MODS; do
2965        echo $m >> $mountpoint/tmp/modules
2966    done
2967
2968    mkdir -p $mountpoint/proc
2969    LogFile "---------------------------"
2970    LogFile "Size of initial ramdisk:"
2971    LogFile "---------------------------"
2972    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2973    LogFile "---------------------------"
2974    LogFile "Content of initial ramdisk:"
2975    LogFile "---------------------------"
2976    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2977    LogFile "---------------------------"
2978
2979    # Determine what filesystem to use for initrd image
2980    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2981    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2982    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2983    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2984        # say what will be used
2985        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2986        # kernel expects linuxrc in ext2 filesystem
2987        (cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2988        # unmount loop filesystem and create image file using the standard approach
2989        sync
2990        umount $mountpoint || Die "Cannot unmount $tempfile"
2991        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2992        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2993            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2994        else
2995            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2996        fi
2997        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2998        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2999        rm -f ${rdz_fname}.tmp
3000        # log that we are done
3001    elif [ "$gvFileSystem" = "initramfs" ]; then
3002        # say what will be used
3003        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
3004        # make sure that cpio is there
3005        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
3006        # kernel expects init in cpio filesystem
3007        (cd "$mountpoint" ; ln -sf usr/sbin/init init)
3008        # create cpio image file and unmount loop filesystem
3009        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
3010        sync
3011        umount $mountpoint || Die "Cannot unmount $tempfile"
3012        # log that we are done
3013    else
3014        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
3015    fi
3016
3017    if [ "$res" -eq "0" ] ; then
3018        LogAll "INFO: MakeBootInitFile finished without error."
3019    else
3020        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
3021    fi
3022    return 0
3023}
3024
3025
3026##############################################################################
3027#----------------------------------- Main -----------------------------------#
3028##############################################################################
3029
3030# Now we can create what we need
3031mkdir -p $MINDI_TMP
3032
3033# --nolog needs to be first, and is used in analyze-my-lvm
3034if [ "$1" = "--nolog" ] ; then
3035    shift
3036    LOGFILE=/dev/stderr
3037else
3038    > $LOGFILE
3039fi
3040if [ "$1" = "--printvar" ] ; then
3041    shift
3042    if [ _"$1" != _"" ] ; then
3043        set | grep -Ew "^$1" | cut -d= -f2
3044    fi
3045    exit 0
3046fi
3047
3048LogFile "mindi v$MINDI_VERSION"
3049LogFile "-----------------------------"
3050LogFile "Start date : `date`"
3051LogFile "-----------------------------"
3052LogFile "$ARCH architecture detected"
3053LogFile "mindi called with the following arguments:"
3054echo "$@">> $LOGFILE
3055LogFile "-----------------------------"
3056LogFile "pbdistrocheck results:"
3057pbdistrocheck >> $LOGFILE
3058LogFile "-----------------------------"
3059
3060# Log some capital variables
3061[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3062[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3063LogFile "MONDO_SHARE = $MONDO_SHARE"
3064LogFile "MINDI_LIB = $MINDI_LIB"
3065LogFile "MINDI_SBIN = $MINDI_SBIN"
3066LogFile "MINDI_CONF = $MINDI_CONF"
3067# Purge from potential old run
3068if [ _"$MINDI_CACHE" = _"" ]; then
3069    Die "MINDI_CACHE undefined"
3070else
3071    LogFile "MINDI_CACHE = $MINDI_CACHE"
3072fi
3073
3074if [ -f $MINDI_CONFIG ]; then
3075    LogFile "-----------------------------"
3076    LogFile " Mindi configuration file    "
3077    LogFile "-----------------------------"
3078    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3079    LogFile "-----------------------------"
3080fi
3081LogFile "In Mindi"
3082LogFile "--------"
3083LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3084LogFile "--------"
3085
3086trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3087
3088# Sanity checks
3089which which > /dev/null 2> /dev/null || Die "Please install 'which'."
3090which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
3091which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3092which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
3093if which awk &> /dev/null ; then
3094    if ! which gawk &> /dev/null ; then
3095        LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3096    fi
3097fi
3098which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3099[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3100
3101[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3102
3103# Update the PATH variable if incomplete
3104if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3105    PATH=$PATH:/sbin:/usr/sbin
3106    export PATH
3107    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3108    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3109    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3110fi
3111
3112if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3113    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3114fi
3115
3116### TODO
3117### Fix as it's not mandatory on ia64
3118if [ "$ARCH" = "ia64" ] ; then
3119    if which elilo &> /dev/null ; then
3120        LILO_EXE=elilo
3121    else
3122        LILO_EXE=`which false 2> /dev/null`
3123    fi
3124else
3125    FindIsolinuxBinary
3126fi
3127trap "Aborted" SIGTERM
3128DONE="\r\t\t\t\t\t\t\t\tDone.         "
3129kernelpath=""
3130MONDO_ROOT=/var/cache/mondo
3131mkdir -p $MONDO_ROOT
3132
3133if [ -d "/proc/lvm" ]; then
3134    # LVM v1
3135    LVMCMD=""
3136    LVM="v1"
3137elif [ -d "/dev/mapper" ]; then
3138    # LVM v2
3139    LVMCMD="lvm"
3140    LVM="v2"
3141else
3142    LVM="false"
3143fi
3144
3145if [ -e "/proc/cmdline" ]; then
3146    CMDLINE="/proc/cmdline"
3147elif [ -e "/tmp/cmdline" ]; then
3148    CMDLINE="/tmp/cmdline"
3149else
3150    CMDLINE="/dev/null"
3151fi
3152
3153LogFile "INFO: LVM set to $LVM"
3154LogFile "----------"
3155LogFile "mount result:"
3156LogFile "-------------"
3157mount >> $LOGFILE
3158if [ -e "/etc/raidtab" ]; then
3159    LogFile "-------------"
3160    LogFile "/etc/raidtab content:"
3161    LogFile "-------------"
3162    cat /etc/raidtab >> $LOGFILE
3163else
3164    LogFile "No file /etc/raidtab"
3165fi
3166if [ -e "/etc/mdadm.conf" ]; then
3167    LogFile "-------------"
3168    LogFile "/etc/mdadm.conf content:"
3169    LogFile "-------------"
3170    cat /etc/mdadm.conf >> $LOGFILE
3171else
3172    LogFile "-------------"
3173    LogFile "No file /etc/mdadm.conf"
3174fi
3175LogFile "-------------"
3176LogFile "cat $CMDLINE"
3177LogFile "-------------"
3178cat $CMDLINE >> $LOGFILE
3179LogFile "-------------"
3180LogFile "cat /proc/swaps:"
3181LogFile "-------------"
3182cat /proc/swaps >> $LOGFILE
3183LogFile "-------------"
3184if [ -e "/proc/mdstat" ]; then
3185    LogFile "cat /proc/mdstat:"
3186    LogFile "-------------"
3187    cat /proc/mdstat >> $LOGFILE
3188else
3189    LogFile "No pseudo file /proc/mdstat"
3190fi
3191LogFile "-------------"
3192LogFile "cat /proc/partitions:"
3193LogFile "-------------"
3194cat /proc/partitions >> $LOGFILE
3195LogFile "-------------"
3196LogFile "cat /proc/filesystems:"
3197LogFile "-------------"
3198cat /proc/filesystems >> $LOGFILE
3199LogFile "-------------"
3200LogFile "lsmod result:"
3201LogFile "-------------"
3202lsmod >> $LOGFILE
3203MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3204if [ -x /usr/sbin/esxcfg-module ]; then
3205    LogFile "-------------"
3206    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3207    LogFile "-------------"
3208    LogFile "VMWare modules"
3209    LogFile "-------------"
3210    /usr/sbin/esxcfg-module -l >> $LOGFILE
3211    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3212fi
3213LogFile "-------------" 
3214LogFile "FORCE_MODS:"
3215LogFile "-------------"
3216LogFile "$FORCE_MODS"
3217LogFile "-------------"
3218LogFile "DENY_MODS:"
3219LogFile "-------------"
3220LogFile "$DENY_MODS"
3221LogFile "-------------"
3222LogFile "df result:"
3223LogFile "----------"
3224df -aT >> $LOGFILE
3225LogFile "-------------"
3226LogFile "df -i result:"
3227LogFile "----------"
3228df -i >> $LOGFILE
3229LogFile "-------------"
3230if [ -r /boot/grub/menu.lst ]; then
3231    LogFile "-------------"
3232    LogFile "INFO: /boot/grub/menu.lst content"
3233    LogFile "-------------"
3234    cat /boot/grub/menu.lst >> $LOGFILE
3235    LogFile "-------------"
3236fi
3237if [ -r /boot/grub/grub.conf ]; then
3238    LogFile "-------------"
3239    LogFile "INFO: /boot/grub/grub.conf content"
3240    LogFile "-------------"
3241    cat /boot/grub/grub.conf >> $LOGFILE
3242    LogFile "-------------"
3243fi
3244if [ -r /boot/grub/grub.cfg ]; then
3245    LogFile "-------------"
3246    LogFile "INFO: /boot/grub/grub.cfg content"
3247    LogFile "-------------"
3248    cat /boot/grub/grub.cfg >> $LOGFILE
3249    LogFile "-------------"
3250fi
3251if [ -r /boot/grub/device.map ]; then
3252    LogFile "-------------"
3253    LogFile "INFO: /boot/grub/device.map content"
3254    LogFile "-------------"
3255    cat /boot/grub/device.map >> $LOGFILE
3256    LogFile "-------------"
3257fi
3258if [ -r /etc/lilo.conf ]; then
3259    LogFile "-------------"
3260    LogFile "INFO: /etc/lilo.conf content"
3261    LogFile "-------------"
3262    cat /etc/lilo.conf >> $LOGFILE
3263fi
3264if [ -d /boot/efi ]; then
3265    gcf=`find /boot/efi -name 'grub.c*'`
3266    if [ _"$gcf" = _"" ]; then
3267        LogFile "Found a /boot/efi directory without a grub config file in it"
3268    else
3269        LogFile "-------------"
3270        LogFile "INFO: $gcf content"
3271        LogFile "-------------"
3272        cat $gcf >> $LOGFILE
3273        LogFile "-------------"
3274    fi
3275fi
3276
3277LogFile "Full fdisk info"
3278LogFile "---------------"
3279$FDISK -l >> $LOGFILE
3280LogFile "----------------"
3281
3282# Compute libata version
3283laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3284# If libata v2 is used then remove ide-generic as it will perturbate boot
3285if [ "`echo $MODULES | grep libata`" ]; then
3286    if [ "$laver" = "2" ]; then
3287        DENY_MODS="$DENY_MODS ide-generic"
3288        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3289        LogFile "-------------"
3290    fi
3291fi
3292
3293# Check for McAfee which disturbs the access to some files (tgz in articular)
3294if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3295    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3296    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3297    LogFile "WARNING: You have two options:"
3298    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3299    LogFile "WARNING:  - Disable the scanner during the backup"
3300fi
3301
3302#
3303# If we have a USB device we need to store info
3304# and remove it from the parameters line
3305#
3306if [ "$#" -ne "0" ] ; then
3307    if [ "$1" = "--usb" ] ; then
3308        shift
3309        USBDEVICE=$1
3310        if [ _"$USBDEVICE" = _"" ]; then
3311            Die "No USB device specified"
3312        fi
3313        shift
3314    fi
3315fi
3316
3317if [ "$#" -ne "0" ] ; then
3318    if [ "$1" = "--findkernel" ] ; then
3319        resk=`TryToFindKernelPath`
3320        # Avoids logfile content for mondo
3321        export MONDO_SHARE=""
3322        if [ "$resk" = "" ] ; then
3323            if [ $KERNEL_IS_XEN = "yes" ]; then
3324                echo "$xenkernelpath"
3325                LogFile "INFO: xenkernelpath = $xenkernelpath"
3326                MindiExit 0
3327            else
3328                MindiExit -1
3329            fi
3330        else
3331            echo "$resk"
3332            LogFile "INFO: kernelpath = $resk"
3333            MindiExit 0
3334        fi
3335    elif [ "$1" = "--locatedeps" ] ; then
3336        [ ! "$2" ] && Die "Please specify the binary to look at"
3337        LocateDeps $*
3338        # Avoids logfile content for mondo
3339        export MONDO_SHARE=""
3340        MindiExit $?
3341    elif [ "$1" = "--readalllink" ] ; then
3342        [ ! "$2" ] && Die "Please specify the binary to look at"
3343        # Avoids logfile content for mondo
3344        export MONDO_SHARE=""
3345        mr-read-all-link $2
3346        MindiExit $?
3347    elif [ "$1" = "--makebcf" ] ; then
3348        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3349        MakeBootConfFile $2
3350        MindiExit 0
3351    elif [ "$1" = "--makemessage" ] ; then
3352        MakeMessageFile | cut -c1-80
3353        MindiExit 0
3354    elif [ "$1" = "--makemountlist" ] ; then
3355        [ ! "$2" ] && Die "Please specify the output file"
3356        MakeMountlist $2
3357        CheckMountlist $2
3358        # Avoids logfile content for mondo
3359        export MONDO_SHARE=""
3360        MindiExit $?
3361    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3362        echo "Mindi v$MINDI_VERSION"
3363        # Avoids logfile content for mondo
3364        export MONDO_SHARE=""
3365        MindiExit 0
3366    elif [ "$1" = "--ironic" ] ; then
3367        [ ! "$2" ] && [ ! -f "$2" ] && Die "Please specify the kernel to use"
3368        [ ! "$3" ] && [ ! -f "$3" ] && Die "Please specify the initramfs to use"
3369        [ "$4" ] && [ "$4" != "UEFI" ] && [ "$4" != "BIOS" ] && Die "Please specify the boot mode as BIOS or UEFI"
3370        #TODO: See how we can influence the boot loader
3371        [ "$5" ] && [ "$5" != "isolinux" ] && [ "$5" != "grub" ] && [ "$5" != "grub2" ] && Die "Please specify the boot loader as isolinux or grub or grub2"
3372        if [ "$5" ]; then
3373            boottype=$5
3374        fi
3375        [ "$6" ] && [ ! -e "$6" ] && Die "Please specify an existing boot loader path for $boottype"
3376        if [ "$6" ]; then
3377            bootbin=$6
3378        fi
3379        kernelpath=$2
3380        BOOT_TYPE=$4
3381        bigdir=$MINDI_TMP/bigdir
3382        # Ironic requires some specific boot parameters
3383        MINDI_ADDITIONAL_BOOT_PARAMS="selinux=0 barrier=off udevtimeout=10 systemd.debug-shell boot_method=vmedia"
3384        MINDI_BOOT_TIMEOUT=10
3385        EXTRA_SPACE=1500000
3386        # Get the local improvements to the configuration
3387        if [ -f $MINDI_CONFIG ]; then
3388            . $MINDI_CONFIG
3389        fi
3390        PrepareBootDir
3391        PrepareAllTar
3392        cp $3 $MINDI_TMP/initrd.img
3393        MakeBootableDevice ISO
3394        MindiExit 0
3395    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3396        MONDO_TMP=$2
3397        # Change MINDI_TMP for the one provided by mondo
3398        # So that it can get back the built files
3399        if [ _"$MONDO_TMP" = _"" ]; then
3400            Die "MONDO_TMP is empty, aborting"
3401        fi
3402        if [ _"$MONDO_TMP" = _"/" ]; then
3403            Die "MONDO_TMP is /, aborting"
3404        fi
3405        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3406        rmdir $MINDI_TMP
3407        export MINDI_TMP=$MONDO_TMP
3408        mkdir -p $MINDI_TMP
3409
3410        # This is the scratch dir in mondo - subdir images
3411        MINDI_CACHE=$3
3412        LogFile "MINDI_CACHE = $MINDI_CACHE"
3413
3414        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3415        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3416       
3417###
3418### Sq-Modification...
3419### Attempt to locate kernel specific module path
3420### if module path is found then use it other wise use uname -r to set it...
3421###
3422        if [ $KERNEL_IS_XEN = "yes" ]; then
3423            LogAll "INFO: xenkernelpath = $xenkernelpath"
3424        fi
3425        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3426        if [ ! -d "/lib/modules/$kernelname" ]; then
3427           LogAll "WARNING: Module path for ${kernelpath} not found..."
3428           LogAll "         using running kernel\'s modules."
3429           kernelname=$KERVERRUN
3430        else
3431           LogAll "INFO: Using modules for kernel: ${kernelname}"
3432        fi
3433        LogAll "INFO: kernelname = $kernelname"
3434        LogAll "INFO: kernelpath = $kernelpath"
3435###
3436### end of Sq-Modification
3437###
3438        TAPEDEV=$5
3439        TAPESIZE=$6
3440        FILES_IN_FILELIST=$7
3441        USE_LZO=$8
3442        CDRECOVERY=$9
3443        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3444            IMAGE_DEVS=""
3445        else
3446            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3447        fi
3448        if [ "${11}" ] ; then
3449            LILO_OPTIONS=""
3450    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3451        fi
3452        LAST_FILELIST_NUMBER=${12}
3453        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3454        export MINDI_EXCLUDE_DEVS="${14}"
3455        USE_COMP="${15}"
3456        USE_LILO="${16}"
3457        USE_STAR="${17}"
3458        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3459        DIFFERENTIAL="${19}"
3460        USE_GZIP="${20}"
3461        USE_LZMA="${21}"
3462        NOT_BOOT="${22}"
3463        BOOT_TYPE="${23}"
3464        [ "$USE_COMP" = "" ] && USE_COMP=yes
3465        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3466        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3467        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3468        [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3469        # MONDO_ROOT is the real scratchdir
3470        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3471        if [ _"$MONDO_ROOT" != _"" ]; then
3472            mkdir -p $MONDO_ROOT
3473        else
3474            Die "MONDO_ROOT is undefined"
3475        fi
3476    else
3477        LogScreen "Syntax: mindi [--custom ....MondoRescue parameters...]"
3478        LogScreen "        mindi --ironic kernel initrd [BIOS|UEFI] [syslinux|grub|grub2] [/path/to/bootloader]"
3479        LogScreen "        mindi --locatedeps file"
3480        LogScreen "        mindi --makemessage"
3481        LogScreen "        mindi --findkernel"
3482        LogScreen "        mindi --makemountlist file"
3483        LogScreen "        mindi --makebcf bootloader"
3484        LogScreen "        mindi -V"
3485        MindiExit -1
3486    fi
3487fi
3488
3489if [ _"$MINDI_CACHE" != _"" ]; then
3490    rm -rf $MINDI_CACHE/* 2> /dev/null
3491    mkdir -p $MINDI_CACHE
3492fi
3493
3494[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3495
3496if [ _"$MONDO_SHARE" = _"" ]; then
3497    LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3498    LogAll "Latest Mindi is available from http://www.mondorescue.org"
3499    LogAll "BusyBox sources are available from http://www.busybox.net"
3500    LogAll "------------------------------------------------------------------------------"
3501else
3502    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3503fi
3504if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3505    LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3506else
3507    LogAll "ERROR: Unable to find mindi-busybox, please install it"
3508    MindiExit -1
3509fi
3510
3511for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3512    modinfo $i 2> /dev/null 1> /dev/null
3513    if [ $? -eq 0 ]; then
3514        modprobe $i 2>&1 > /dev/null
3515    fi
3516done
3517
3518LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3519LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3520LogFile "NOT_BOOT = '$NOT_BOOT'"
3521if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3522    LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3523    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3524    MakeMountlist $MINDI_TMP/mountlist.txt
3525    CheckMountlist $MINDI_TMP/mountlist.txt
3526    mkdir -p $MINDI_TMP/small-all/tmp
3527    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3528    (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3529    sleep 2
3530    LogAll "Done. Exiting."
3531    MindiExit 0
3532fi
3533
3534if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3535    LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3536fi
3537
3538if [ "$kernelpath" = "" ] ; then
3539    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3540    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3541    read ch
3542    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3543        USE_OWN_KERNEL="yes"
3544    else
3545        USE_OWN_KERNEL="no"
3546    fi
3547    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3548        kernelpath=`TryToFindKernelPath`
3549        if [ "$kernelpath" = "" ] ; then
3550            echo -n "Please enter kernel path : "
3551            read kernelpath
3552        fi
3553    fi
3554fi
3555
3556echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3557[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3558
3559mountpoint=$MINDI_TMP/mountpoint.$$
3560PrepareDataDiskImages
3561
3562MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not create initrd.img"
3563
3564[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3565...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3566
3567if [ _"$MONDO_SHARE" = _"" ]; then
3568    OfferToMakeBootableISO
3569    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3570        OfferToMakeBootableUSB
3571    fi
3572    LogAll "INFO: Mindi Finished"
3573elif [ "$TAPEDEV" ] ; then
3574    if [ "$ARCH" != "ia64" ] ; then
3575        # We need to keep the img file as boot file for ia64 platform
3576        rm -f $MINDI_CACHE/{*img,*iso}
3577    else
3578        rm -f $MINDI_CACHE/*iso
3579    fi
3580    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3581        OfferToMakeBootableUSB
3582    fi
3583    OfferToMakeBootableISO
3584    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3585        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3586    else
3587        Die "Cannot find all.tar.gz, to be written to tape"
3588    fi
3589elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3590    OfferToMakeBootableUSB
3591else
3592    OfferToMakeBootableISO
3593fi
3594
3595if [ -f $MINDI_TMP/$MRCFG ]; then
3596    LogFile "INFO: Your $MRCFG file is:"
3597    LogFile "--------------------------"
3598    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3599    LogFile "--------------------------"
3600else
3601    if [ _"$MONDO_SHARE" != _"" ] ; then
3602        LogAll "ERROR: You don't have a $MRCFG file !"
3603    fi
3604fi
3605# cleanup
3606MindiExit 0
Note: See TracBrowser for help on using the repository browser.