source: branches/3.2/mindi/mindi @ 3572

Last change on this file since 3572 was 3572, checked in by bruno, 3 years ago
  • Fix #757, #780 and #781 by adding raid* drivers in mindi's driver list
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 124.5 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3572 2016-04-27 14:22:24Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=150000      # increase if you run out of ramdisk space
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc raid0 raid1 raid456"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi_Image -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143fi
144
145# Function to log on screen only
146LogScreen() {
147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
152}
153
154# Function to log in log file only
155LogFile() {
156
157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160        rm -f "$2"
161    fi
162}
163
164# Function to log in both screen and logfile
165LogAll() {
166    LogScreen "$1"
167    LogFile "$1" "$2"
168}
169
170# Last function called before exiting
171# Parameter is exit code value
172# Should be declared here as used immediately below potentialy
173MindiExit() {
174    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
175    LogFile "INFO: End date : `date`" 
176    if [ _"$MONDO_SHARE" != _"" ] ; then
177        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178        if [ -f $LOGFILE ]; then
179            cat $LOGFILE >> /var/log/mondoarchive.log
180        else
181            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
182        fi
183        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184    fi
185
186    cd /
187    sync&
188
189    # Clean temporary files only when standalone mindi
190    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191        rm -Rf $MINDI_TMP
192    fi
193    exit $1
194}
195
196Die() {
197    local i
198    if [ "$1" = "" ] ; then
199        LogAll "FATAL ERROR"
200    else
201        LogAll "FATAL ERROR. $1"
202    fi
203    if [ _"$2" != _"" ]; then
204        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
205    fi
206    rm -f "$2"
207
208    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
209    LogAll "See http://www.mondorescue.org for more information."
210    LogAll "WE CANNOT HELP unless you enclose that file.\n"
211    MindiExit -1
212}
213
214# Now we can create what we need
215MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
216if [ $? -ne 0 ]; then
217    df $TMPDIR
218    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
219fi
220if [ _"$MINDI_TMP" = _"" ]; then
221    Die "MINDI_TMP is empty, aborting"
222fi
223if [ _"$MINDI_TMP" = _"/" ]; then
224    Die "MINDI_TMP is /, aborting"
225fi
226export MINDI_TMP
227
228# ----------------------------------------------------------------------------
229
230
231AbortHere() {
232    [ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
233    Die "Program is terminating in response to signal received from OS/user"
234}
235
236
237Aborted() {
238    trap SIGHUP SIGTERM SIGTRAP SIGINT
239    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
240    Die "User abort."
241}
242
243
244AddFileToCfgIfExists() {
245    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
246}
247
248
249AddKeyboardMappingFile() {
250    local mappath r included_list included_item i res ii sss
251    mappath=$1
252    KBDEPTH=$(($KBDEPTH+1))
253    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
254    if [ -e "$bigdir/$mappath" ] ; then
255        LogFile "INFO: $mappath already added"
256        return
257    elif [ -d "$bigdir/$mappath" ] ; then
258        echo "Cannot add $mappath: it's a directory. Sorry."
259        return
260    fi
261    LogFile "INFO: Added kbd map $mappath"
262    if [ ! -e "$mappath" ] ; then
263        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
264        if [ ! -e "$mappath" ] ; then
265            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
266            return
267        fi
268    fi
269
270    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
271    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
272        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
273    else
274        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
275    fi
276    for included_item in $included_list ; do
277        if [ ! -e "$included_item" ] ; then
278            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
279            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
280            for ii in $sss ; do
281                [ -e "$ii" ] && AddKeyboardMappingFile $ii
282            done
283        else
284            AddKeyboardMappingFile $included_item
285        fi
286    done
287}
288
289
290CopyDependenciesToDirectory() {
291    local outdir incoming counter d found tdir templog
292    outdir=$1
293    templog=$MINDI_TMP/$$.log
294    mkdir -p $outdir
295    incoming=`ReadLine`
296    counter=$3
297    > $templog
298
299    while [ "$incoming" != "" ] ; do
300        if [ "$3" = "1" ]; then
301            counter=$(($counter+1))
302            LogProgress $counter $2
303        fi
304        # Non absolute file names should not arrive till here => skipped
305        if [ `echo "$incoming" | cut -c1` != '/' ]; then
306            LogAll "WARNING: Unable to handle $incoming"
307            incoming=`ReadLine`
308            continue
309        fi
310        # no parent directory of incoming should be a link, copy is not possible in that case
311        d=`dirname "$incoming"`
312        found="false"
313        while [ $d != "/" -a $found = "false" ]; do
314            [ -h "$d" ] && found="true"
315            d=`dirname "$d"`
316        done
317        if [ -d "$incoming" -a ! -h "$incoming" ]; then
318            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
319        elif [ -e "$incoming" ] && [ $found = "false" ]; then
320            if [ ! -h "$incoming" ]; then
321                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
322            else
323                tdir=`dirname "$incoming"`
324                if [ ! -e "$outdir/$tdir" ]; then
325                    mkdir -p "$outdir/$tdir"
326                fi
327                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
328            fi
329            # Only uncompress modules if not using udevd
330            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
331                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
332            fi
333            [ -x "$outdir" ] && StripExecutable $outdir
334        fi
335        incoming=`ReadLine`
336    done
337}
338
339
340CountItemsIn() {
341    local r
342    r=0
343    for q in $1 ; do
344        r=$(($r+1))
345    done
346    echo $r
347}
348
349
350DropOptimizedLibraries() {
351    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
352    filelist=$1
353    outdir=$2
354
355    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
356    if [ "$list_of_optimized_libraries" = "" ] ; then
357        return 0
358    fi
359    echo -en "Dropping i686-optimized libraries if appropriate"
360    for optimized_lib_name in $list_of_optimized_libraries ; do
361        echo -en "."
362        reason=""
363        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
364        echo "$vanilla_lib_name" >> $filelist
365        LogFile "INFO: Adding $vanilla_lib_name to filelist"
366        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
367        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
368
369        # This may return multiple files
370        for resolved in `mr-read-all-link $vanilla_lib_name`; do
371            LogFile "INFO: Adding as deps $resolved to filelist"
372            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
373            if [ "$vanilla_resolved_name" != "$resolved" ]; then
374                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
375                rmdir $outdir$resolved > /dev/null 2> /dev/null
376                ln -sf $vanilla_resolved_name $outdir$resolved
377                LogFile "INFO: Excluding deps $resolved" 
378                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
379                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
380                echo "$vanilla_resolved_name" >> $filelist.tmp
381                mv -f $filelist.tmp $filelist
382            fi
383        done
384    done
385    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
386    mv -f $filelist.tmp $filelist
387    echo -e "$DONE"
388}
389
390
391FindAndAddUserKeyboardMappingFile() {
392    local r res mapfile mappath included_item included_list keyfile mp locale
393    LogAll "INFO: Analyzing your keyboard's configuration."
394    KEYDIR=/usr/lib/kbd
395    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
396    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
397    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
398    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
399    if [ ! -e "$KEYDIR" ] ; then
400        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
401        return 0
402    else
403        LogFile "INFO: KEYDIR=$KEYDIR"
404    fi
405    if [ -e "/etc/sysconfig/keyboard" ] ; then
406        LogFile "INFO: Red Hat-style config detected."
407        keyfile=/etc/sysconfig/keyboard
408    elif [ -e "/etc/vconsole.conf" ] ; then
409        LogFile "INFO: New Fedora style config detected."
410        keyfile=/etc/vconsole.conf
411    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
412        LogFile "INFO: Slackware-style config detected."
413        keyfile=/etc/rc.d/rc.keymap
414    elif [ -e "/etc/rc.config" ] ; then
415        LogFile "INFO: Debian-style config detected."
416        keyfile=/etc/rc.config
417    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
418        LogFile "INFO: Debian-style config detected."
419        mkdir -p $bigdir/tmp
420        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
421        KBDEPTH=0
422        mkdir -p $bigdir/etc/console
423        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
424        echo ""
425        echo -e "$DONE"
426        return 0
427    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
428        LogFile "INFO: Ubuntu-style config detected."
429        mkdir -p $bigdir/tmp
430        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
431            kbdfile="/etc/console-setup/boottime.kmap.gz"
432        else
433            kbdfile="/etc/console-setup/cached.kmap.gz"
434        fi
435        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
436        KBDEPTH=0
437        mkdir -p $bigdir/etc/console-setup
438        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
439        echo ""
440        echo -e "$DONE"
441        return 0
442    elif [ -e "/etc/rc.conf" ] ; then
443        LogFile "INFO: ArchLinux config detected."
444        keyfile=/etc/rc.conf
445    elif [ -e "/etc/conf.d/keymaps" ] ; then
446        LogFile "INFO: Gentoo-style config detected."
447        keyfile=/etc/conf.d/keymaps
448    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
449        LogFile "INFO: X11-style config detected."
450        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
451    else
452        LogFile "Searching for rc.config ..."
453        keyfile=`find /etc -name rc.config | head -n1`
454        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
455            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
456            return
457        else
458            LogFile "INFO: Found $keyfile"
459        fi
460    fi
461    if [ ! -e "$KEYDIR/keymaps" ] ; then
462        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
463        return
464    fi
465    LogFile "INFO: keyfile=$keyfile"
466    # For SLES we need to remove the .map.gz extension Cf #614
467    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
468    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
469    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
470    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
471    LogFile "INFO: locale=$locale"
472    #
473    # Process the keymaps dir once for all
474    # AddKeyboardMappingFile will use it recursively
475    #
476    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
477    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
478    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
479    # For new distro such as RHEL 7 we need that additional search
480    [ ! "$mp" ] && mp=`grep "xkb" $MINDI_TMP/keymaps.find | grep -E "/$locale\." | grep -vx " *#.*"`
481    # If we have multiple keymaps then log it !!
482    echo "$mp" | grep -q " " >> $LOGFILE
483    if [ $? -eq 0 ]; then
484        LogAll "WARNING: Multiple keymaps found: $mp"
485        LogFile "INFO: The following one will be used"
486    fi
487    for i in $mp ; do
488        mappath=$i
489        [ -e "$i" ] && [ ! -d "$i" ] && break
490    done
491    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
492        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
493    fi
494    LogFile "INFO: mappath = $mappath"
495    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
496        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
497        return
498    fi
499    echo -en "INFO: Adding keyboard mapping tables"
500    mkdir -p $bigdir/tmp
501    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
502    KBDEPTH=0
503    AddKeyboardMappingFile $mappath
504    echo ""
505    echo -e "$DONE"
506    rm -f $MINDI_TMP/keymaps.find
507    return 0
508}
509
510
511FindLdlinux32Binary() {
512    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
513    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
514    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
515    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
517    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
518    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
519    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
520    if [ ! -e "$LDLINUXC32" ]; then 
521        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
522        LDLINUXC32=/tmp/idoesnthopefullyexist
523    else
524        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
525    fi
526}
527
528
529FindMboot32Binary() {
530    MBOOTC32=/usr/lib/syslinux/mboot.c32
531    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
532    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
533    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
536    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
537    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
538    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
539    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
540}
541
542FindLdlinuxe64Binary() {
543    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
544    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
545    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
546    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
548    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
549    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
550    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
551    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
552}
553
554FindSyslinux64EFI() {
555    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
556    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
557    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
558    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
560    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
561    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
562    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
563    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
564}
565
566FindIsolinuxBinary() {
567    ISOLINUX=/usr/lib/isolinux.bin
568    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
569    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
570    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
573    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
574    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
575    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
576    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
577}
578
579
580GenerateGiantDependencyList() {
581    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
582
583    echo -en "INFO: Analyzing dependency requirements"
584    outfile=$1
585    tempfile=$MINDI_TMP/$$.txt
586    incoming=`ReadLine`
587
588    > $tempfile
589    progress=0
590    res=0
591    noof_lines=$2
592    while [ "$incoming" != "" ] ; do
593        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
594            incoming=`ReadLine`
595            continue
596        fi
597        if [ "$incoming" = "LVMFILES:" ] ; then
598            break
599        fi
600        filelist=`GenerateListForFile "$incoming"`
601        r=$?
602        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
603        res=$(($res+$r))
604#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
605        for fname in $filelist ; do
606            [ "$fname" != "" ] && echo "$fname" >> $tempfile
607        done
608        progress=$(($progress+1))
609        LogProgress $progress $noof_lines
610        incoming=`ReadLine`
611    done
612    if  [ "$incoming" = "LVMFILES:" ] ; then
613        incoming=`ReadLine`
614        lvmversion=""
615        while [ "$incoming" != "" ] ; do
616            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
617                incoming=`ReadLine`
618                continue
619            fi
620            filelist=`GenerateListForFile "$incoming"`
621            for tool in $filelist ; do
622                lvmresolved=`readlink -f $tool`
623                if [ "$tool" = "$lvmresolved" ]; then
624                    echo "$tool" >> $tempfile
625                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
626                    if [ "$lvmversion" = "" ] ; then
627                        lvmversion=`$lvmresolved`
628                        echo "$lvmresolved" >> $tempfile
629                    fi
630                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
631                    if [ "$lvmversion" = "200" ]; then
632                        # pvdata and lvmcreate_initrd don't exist in LVM2
633                        case "$toolstripped" in
634                        "pvdata")
635                            continue
636                            ;;
637                        "lvmcreate_initrd")
638                            continue
639                            ;;
640                        esac
641                    fi
642                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
643                    if [ -e "$toolpath" ] ; then
644                        echo "$toolpath" >> $tempfile
645                        echo "$tool" >> $tempfile
646                    else
647                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
648                    fi
649                    if [ -e "$toolpath" ] ; then
650                        echo "$toolpath" >> $tempfile
651                        echo "$tool" >> $tempfile
652                    else
653                        echo "Where are your LVM-Tools? Couldn't find $tool"
654                    fi
655                else
656                    echo "$tool" >> $tempfile
657                fi
658            done
659            progress=$(($progress+1))
660            LogProgress $progress $noof_lines
661            incoming=`ReadLine`
662        done
663    fi
664    echo -en "$DONE\nINFO: Making complete dependency list"
665
666    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
667    mv -f $tempfile.new $tempfile
668    > $outfile.pre
669    progress=0
670    noof_lines=`cat $tempfile | wc -l`
671    LogFile "---------------------------------"
672    LogFile "List of dependencies:             "
673    LogFile "---------------------------------"
674    for fname in `cat $tempfile` ; do
675        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
676        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
677        progress=$(($progress+1))
678        LogProgress $progress $noof_lines
679    done
680    if [ _"$MONDO_SHARE" != _"" ]; then
681        mkdir -p $bigdir/tmp
682        mkdir -p $bigdir/usr/bin
683        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
684            LogAll "\nINFO: Incorporating post-nuke tarball"
685            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
686        fi
687        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
688            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
689        else
690            LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
691            LogAll "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
692            LogAll "       If Mindi was called by Mondo then send a bug report."
693            LogAll "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
694            LogAll "       Finally, run Mindi again."
695            Die "Odd."
696        fi
697        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
698        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
699            LogAll "\nINFO: Incorporating Network-related settings"
700            for r in NETFS-* ; do
701                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
702                LogFile "INFO: Copying $r to ramdisk"
703            done
704        fi
705    fi
706    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
707    rm -f $tempfile $outfile.pre
708    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
709    return $res
710}
711
712
713GenerateListForFile() {
714    local files_found loc fname incoming i res
715    incoming="$1"
716    files_found=""
717    res=0
718
719    for fname in $incoming ; do
720        files_found="$files_found `LocateFile $fname`"
721    done
722
723    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
724}
725
726
727# Returns all disk devices which are part of a raid array
728GetAllRaidMembers() {
729    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
730}
731
732
733GetFileSizeList() {
734    local i
735    for i in `find $1 -type d -o -print` ; do
736        du -sk $i
737    done
738}
739
740
741# Check kernel filesystem capabilites for accessing initrd image
742# Could be ext2 FS (old mode) or initramfs (new mode)
743#
744# Interface definition:
745# param #1: absolute path to kernel image
746GetInitrdFilesystemToUse() {
747
748    # interface test: make sure we have one parameter
749    if [ $# -ne 1 ]; then
750        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
751    fi
752
753    # interface parameters
754    local lvKernelImage=$1
755
756    # local constants (filesystem magic strings)
757    local lcMagicCramfs="<3>cramfs: wrong magic"
758    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
759    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
760    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
761
762    # local variables
763    local lvOffset
764    local lvScanRes
765    local lvUseFilesystem
766
767    # say where we are.
768    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
769
770    # verify that file exists
771    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
772
773    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
774    file $lvKernelImage 2>&1 | grep -q gzip
775    if [ $? -eq 0 ]; then
776        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
777        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
778    else
779        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
780        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
781        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
782        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
783        if [ $lvOffset -eq 0 ]; then
784            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
785            lvScanRes=$lcMagicInitfs
786        else
787            lvOffset=`expr $lvOffset / 2`
788            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
789            # scan again  kernel image
790            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
791        fi
792    fi
793
794    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
795    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
796        lvUseFilesystem="ext2fs"
797    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
798        lvUseFilesystem="ext3fs"
799    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
800        lvUseFilesystem="initramfs"
801    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
802        lvUseFilesystem="cramfs"
803    else
804        # In that case, we are most probably after 2.6.30 and use the supported initramfs
805        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
806        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
807        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
808        lvUseFilesystem="initramfs"
809    fi
810
811    # say what we are using
812    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
813
814    # return file system to use
815    echo "$lvUseFilesystem"
816
817}
818
819# Searches members of raid device
820# $1: raid device (/dev/md...)
821GetRaidDevMembers() {
822    if [ ! -f /etc/raidtab ]; then 
823        return
824    fi
825    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
826}
827
828
829ListAllPartitions() {
830    local res currline partition all_partitions ap_orig remaining i j
831
832    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
833    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
834    if [ -e "/vmfs/volumes" ]; then
835        # For VMWare ESX 3 get the device names of these volumes
836        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
837    fi
838    return
839}
840
841
842ListKernelModulePaths() {
843    local module_list module fname r kern
844    module_list="$MODULES"
845    # Remove unwanted modules from list
846    for i in $DENY_MODS; do
847        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
848    done
849###
850### Sq-Modification ... Use kernelname for module search path if specified
851###
852    if [ "${kernelname}" != "" ]
853    then
854        kern=${kernelname}
855    else
856        kern="$KERVERRUN"
857    fi
858    export KERVER=$kern
859###
860### Sq-Mod End
861###
862    # Get rid of duplicates
863    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
864        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
865        if [ -z "$r" ]; then
866            if [ "`echo "$MODULES" | grep -w $module`" ]; then
867                r="[live module file not found]"
868            else
869                r="[extra module file not found]"
870            fi
871        else
872            [ -f "$r" ] && echo "$r"
873        fi
874        LogFile "INFO: module $module --> $r"
875    done
876    find /lib/modules/$kern/modules.* -type f 2> /dev/null
877}
878
879#
880# Critical function which computes all dependencies (dyn. lib.)
881# for a list of binaries
882#
883LocateDeps() {
884    local incoming fname deps
885    incoming="$*"
886    deps=""
887
888    for fname in $incoming ; do
889        if [ ! -e "$fname" ] ; then
890            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
891            if echo $fname | grep lvm &> /dev/null ; then
892                LogFile "          This warning only affects you if you are using LVM."
893                if echo "$MODULES" | grep lvm &> /dev/null ; then
894                    LogFile "          I think you are, so please take heed!"
895                else
896                    LogFile "          I don't think you are, so don't worry about it."
897                fi
898            fi
899        else
900            deps="$deps $fname" 
901        fi
902    done
903    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
904}
905
906
907LocateFile() {
908    local i j path fname_to_find location output resolved tmp stub cache_id loclist
909    fname_to_find="$1"
910    # It's an absolute path
911    j=`echo "$fname_to_find" | cut -c1`
912    if [ _"$j" = _"/" ]; then
913        dn=`dirname $fname_to_find`
914        # We suppose that the link is already included, just add the new file
915        if [ -h "$dn" ]; then
916            newdn=`readlink -f $dn`
917            bn=`basename $fname_to_find`
918            output="$newdn/$bn"
919        else
920            output="$fname_to_find"
921        fi
922        if [ -h "$output" ] ; then
923            output="`mr-read-all-link $output` $output"
924        fi
925        echo "$output"
926        return 0
927    fi
928    # It's not an absolute path
929    output=""
930    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
931    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
932        [ -h "$path" ] && continue
933        [ ! -e "$path/$fname_to_find" ] && continue
934        output="$path/$fname_to_find $output"
935        if [ -h "$path/$fname_to_find" ] ; then
936            output="`mr-read-all-link $path/$fname_to_find` $output"
937        fi
938    done
939    if [ "$output" = "" ] ; then
940        return 1
941    fi
942    echo "$output"
943    return 0
944}
945
946LogProgress() {
947    local i progress modres noof_lines title
948 
949    progress=$1
950    noof_lines=$2
951    title=$3
952
953    i=$(($progress*100))
954    if [ $noof_lines -ne 0 ]; then
955        i=$(($i/$noof_lines))
956    else
957        i=0
958    fi
959
960    if [ _"$MONDO_SHARE" != _"" ]; then 
961        echo "$title        $i%"
962    else
963        echo -en "\r\t\t\t\t\t\t\t\t"
964        echo -en "$i"
965        echo -en "%"
966        modres=$(($progress%4))
967        [ "$modres" -eq "0" ] && echo -en "\t/"
968        [ "$modres" -eq "1" ] && echo -en "\t-"
969        [ "$modres" -eq "2" ] && echo -en "\t\\"
970        [ "$modres" -eq "3" ] && echo -en "\t|"
971    fi
972}
973
974# Called by MakeBootInitFile, to make /tmp/$MRCFG
975MakeMondoConfigFile() {
976    local outfile use_lzo use_comp use_star
977    outfile=$1
978    > $outfile
979    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
980    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
981    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
982    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
983    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
984    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
985    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
986    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
987    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
988    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
989    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
990    echo "use-lzo $use_lzo" >> $outfile
991    echo "use-gzip $use_gzip" >> $outfile
992    echo "use-star $use_star" >> $outfile
993    echo "use-lzma $use_lzma" >> $outfile
994    echo "use-comp $use_comp" >> $outfile
995    echo "boot-type $BOOT_TYPE" >> $outfile
996    echo "datestamp `date`" >> $outfile
997    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
998    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1011
1012    # Deal with network configuration in a portable way
1013    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1014        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1015    fi
1016}
1017
1018# Get PV's for an LV
1019GetPVsForLV() {
1020    if [ -n "$1" ]; then
1021        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1022        if [ -z "$vg" ]; then
1023            return
1024        fi
1025        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1026    fi
1027}
1028
1029
1030MakeMountlist() {
1031    local mountlist all_partitions current_partition \
1032partition_size partition_format outstring partition_number \
1033partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1034absolute_partition old_partition_fmt current_lvolume uname skip
1035
1036    LogFile "------------------------------------"
1037    LogFile "INFO: Your raw fstab file looks like this:"
1038    LogFile "------------------------------------"
1039    cat $MY_FSTAB >> $LOGFILE
1040    LogAll "-----------------------------------"
1041    LogAll "INFO: Your mountlist will look like this:"
1042    LogAll "-----------------------------------"
1043
1044# mountlist(OUT)
1045    mountlist=$1
1046
1047# NB: partition = device
1048# NB: mountpt = where the device is mounted
1049
1050    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1051
1052    [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1053    > $mountlist
1054    all_partitions=""
1055   
1056    if [ $LVM != "false" ]; then
1057        LogFile "INFO: Analyzing LVM..."
1058        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1059        if [ $? -ne 0 ]; then
1060            LVM="false"
1061        fi
1062        # Excluded LVs and GVs are not reported here
1063        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1064    fi
1065    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1066    for i in $IMAGE_DEVS ; do
1067        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1068    done
1069    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1070    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1071    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1072    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1073    for c_p in $all_partitions ; do
1074        # Skip fd/cd devices, network FS, cifs
1075        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1076        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1077        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1078            current_partition=`readlink -f $c_p`
1079            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1080                current_partition="$c_p"
1081            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1082                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1083                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1084            fi
1085            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1086        else
1087            current_partition="$c_p"
1088        fi
1089        [ "$c_p" = "none" ] && continue
1090        redhat_label=""
1091        label=""
1092        uuid=""
1093        absolute_partition=`readlink -f $c_p`
1094        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1095
1096        # set default in case we dont't find it
1097        str_to_find_fmt_with=$current_partition
1098
1099        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1100        # current_partition contains only first column of /etc/fstab
1101        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1102            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1103            actual_dev=""
1104
1105            # 1st try, findfs - the RHEL way of finding labels and their partitions
1106            if [ -x "/sbin/findfs" ]; then
1107                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1108            fi
1109   
1110            # 2nd try : blkid, the good way for all LABEL except swap
1111            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1112                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1113                # For LVM FS it will give a /dev/dm-# which should then be converted
1114                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1115                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1116                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1117                    for dev in `ls /dev/mapper/*`; do
1118                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1119                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1120                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1121                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1122                            break
1123                        fi
1124                    done
1125                fi
1126            fi
1127   
1128            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1129            # For LVM gives a /dev/mapper entry
1130            if [ "x$actual_dev" = "x" ]; then
1131                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1132            fi
1133   
1134            # 4th try, with vol_id
1135            # SWAP only
1136            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1137                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1138                for dev_swap in $list_swaps ; do
1139                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1140                    if [ "x$dev_exists" != "x" ]; then
1141                        actual_dev=$dev_swap
1142                        break;
1143                    fi
1144                done
1145            fi
1146
1147            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1148            # LABEL=SW-cciss/c0d0p3 (RDP)
1149            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1150            # SWAP only
1151            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1152                    skip=""
1153                    uname=$KERVERRUN
1154                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1155                    # 2.6.12 needs 16 (FC3)
1156                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1157                    # 2.6.19 and upper needs 1052
1158                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1159                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1160                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1161                    if [ $skip = "" ]; then
1162                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1163                    fi
1164                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1165                    do
1166                        # Location of the swap label for kernel 2.6
1167                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1168                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1169                            actual_dev=$try_dev
1170                        fi
1171                    done
1172            fi
1173
1174            # Check if one of all those tries has known success
1175            if [ "x$actual_dev" != "x" ]; then
1176                current_partition=$actual_dev
1177            else
1178                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1179            fi
1180        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1181        # current_partition contains only first column of /etc/fstab
1182        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1183            uuid=`echo "$current_partition" | cut -d'=' -f2`
1184            actual_dev=""
1185
1186            # 1st try, findfs - the RHEL way of finding labels and their partitions
1187            if [ -x "/sbin/findfs" ]; then
1188                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1189            fi
1190   
1191            # 2nd try : blkid, the good way for all UUID except swap
1192            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1193                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1194                # For LVM FS it will give a /dev/dm-# which should then be converted
1195                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1196                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1197                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1198                    for dev in `ls /dev/mapper/*`; do
1199                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1200                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1201                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1202                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1203                            break
1204                        fi
1205                    done
1206                fi
1207            fi
1208   
1209            # 3th try, with vol_id
1210            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1211                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1212                for dev in $list_dev ; do
1213                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1214                    if [ "x$dev_exists" != "x" ]; then
1215                        actual_dev=$dev
1216                        break;
1217                    fi
1218                done
1219            fi
1220
1221            # 4th try, with dumpuuid (VMWare only ?) for swap
1222            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1223                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1224                for dev in $list_dev ; do
1225                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1226                    if [ "x$dev_exists" != "x" ]; then
1227                        actual_dev=$dev
1228                        break;
1229                    fi
1230                done
1231            fi
1232
1233            # Check if one of all those tries has known success
1234            if [ "x$actual_dev" != "x" ]; then
1235                current_partition=$actual_dev
1236            else
1237                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1238            fi
1239        else
1240            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1241            # they use symlinks in fstab unrelated to what is shown in mount !
1242            if [ _"$partition_mountpt" = _"" ]; then
1243                # set default in case we dont't find it
1244                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1245                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1246                            str_to_find_fmt_with=$tmpp
1247                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1248                            break;
1249                        fi
1250                done
1251            fi
1252        fi
1253
1254        # Detects noauto partitions not mounted and exclude them
1255        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1256        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1257                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1258            continue
1259        fi
1260        # Detects bind partitions and exclude them
1261        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1262                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1263            continue
1264        fi
1265
1266        # Look for devices which have to be excluded
1267        skip=0
1268        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1269            l=""
1270            list_of_devices="`mr-read-all-link $current_partition`"
1271            for d in $list_of_devices; do
1272                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1273            done
1274
1275            # Remove PVs from LVs excluded
1276            l="$l `GetPVsForLV $current_partition`"
1277
1278            # We want a single unique list
1279            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1280
1281            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1282                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1283                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1284                    skip=1
1285                    continue
1286                fi
1287            done
1288        fi
1289        if [ $skip -eq 1 ]; then
1290            continue
1291        fi
1292
1293        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1294        # Detects iso9660 ISO images and exclude them
1295        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1296                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1297            continue
1298        fi
1299        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1300        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1301        # the former is then a link to the latter, so we test whether
1302        # $current_partition is actually such a link or not and set
1303        # $current_lvolume accordingly. On Debian you may find more than one answer
1304        # so we remove the one corresponding to /dev/.static
1305        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1306        # principle is the same and we need to find the link to it as well.
1307        # Note that $current_lvolume may well be an
1308        # ordinary device. It is just to make sure that we feed the right value
1309        # into any of the LVM tools if possible.
1310
1311        current_lvolume="$current_partition"
1312        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1313            # .static dir are a Debian specificity
1314            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1315            echo $current_lvolume | grep -q ' '
1316            if [ $? -eq 0 ]; then
1317                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1318            fi
1319            # if it's not found, it may well be a real device such as a multipath one
1320            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1321            if [ _"$current_lvolume" = _"" ]; then
1322                current_lvolume="$current_partition"
1323            fi
1324        fi
1325        #
1326        # End of LVM device style variation code (other than $current_lvolume).
1327
1328        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1329            # Size computed via LVM not directly
1330            partition_size="lvm"
1331        else
1332            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1333            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1334            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1335                # Skip swap files
1336                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1337                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1338                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1339                [ "$partition_format" != "swap" ] && partition_format="swap"
1340                if [ "$partition_size" = "" ] ; then
1341                    totalsize=0
1342                    items=0
1343                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1344                        totalsize=$(($totalsize+$i))
1345                        items=$(($items+1))
1346                    done
1347                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1348                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1349                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1350                fi
1351            else
1352                partition_size=`SizeOfPartition $current_partition`
1353            fi
1354        fi
1355        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1356        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1357        if [ "$partition_mountpt" = "" ] ; then
1358            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1359                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1360                    partition_mountpt="raid"
1361                    partition_format="raid"
1362                else
1363                    partition_mountpt="lvm"
1364                    partition_format="lvm"
1365                fi
1366            fi
1367        fi
1368        psz=$partition_size
1369        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1370        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1371        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1372            partition_mountpt="image"
1373            old_partition_fmt=$partition_format
1374            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1375            partition_size=$(($partition_size+1)); # just in case
1376            if [ "$partition_format" = "Linux" ] ; then
1377                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1378                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1379                partition_format=$old_partition_fmt
1380            fi
1381        fi
1382
1383        if [ ! "$partition_mountpt" ] ; then
1384            LogFile "------- $FDISK -l $qq log ------------"
1385            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1386                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1387                [ "$partition_format" ] && break
1388            done
1389            LogFile "------- $FDISK log end ------------"
1390            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1391                partition_format="compaq"
1392            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1393                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1394                continue
1395            fi
1396        fi
1397        if [ "$redhat_label" ]; then
1398            label="$redhat_label"
1399        elif [ "$uuid" ]; then
1400            label="$uuid"
1401        fi
1402
1403        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1404        # in order to mount the root part e.g. in grub.
1405        # One way to solve this is to add the UUID now, if there wasn't one so it's
1406        # restored correctly
1407        if [ _"$label" = _"" ]; then
1408            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1409        fi
1410
1411        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1412        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1413        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1414        if [ "$current_partition" = "" ] ; then
1415            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1416        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1417            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1418                partition_mountpt=raid
1419                partition_format=raid
1420                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1421                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1422            else
1423                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1424            fi
1425        elif [ "$partition_format" = "" ] ; then
1426            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1427        elif [ "$partition_size" = "" ] ; then
1428            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1429        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1430            continue
1431        else
1432            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1433            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1434                partition_format="vfat"
1435            fi
1436            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1437            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1438        fi
1439    done
1440    LogAll "-----------------------------------" 
1441}
1442
1443CheckMountlist() {
1444    local file=$1
1445    # Coherency verification
1446    ML01=`cat $file | wc -l`
1447    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1448    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1449    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1450    if [ "$ML01" -ne "$ML1" ]; then
1451        LogFile "--------------------------------------------"
1452        LogAll "WARNING: Duplicate device entry in mountlist"
1453        LogFile "--------------------------------------------"
1454    fi
1455    if [ "$ML02" -ne "$ML2" ]; then
1456        LogFile "--------------------------------------------"
1457        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1458        LogFile "------------------------------------------------"
1459    fi
1460}
1461
1462
1463MakeISOErrors() {
1464
1465LogFile "----------- $ISO_CMD's errors --------------"
1466LogAll "$ISO_CMD returned the following errors:"
1467cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1468LogAll "ERROR: Failed to create ISO image."
1469}
1470
1471MakeISO() {
1472
1473LogAll "INFO: Invoking $CMD ."
1474(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1475if [ $? -ne 0 ] ; then
1476    if [ "$BOOT_TYPE" = "UEFI" ]; then
1477        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1478        LogAll "INFO: Invoking instead $CMD"
1479        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1480        if [ $? -eq 0 ] ; then
1481            LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1482        else
1483            MakeISOErrors
1484        fi
1485    else
1486        MakeISOErrors
1487    fi
1488else
1489    LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1490fi
1491rm -f $MINDI_TMP/mkisofs.log
1492}
1493
1494MakeBootableDevice() {
1495
1496local target tbc retval part size mount_opt
1497
1498target="$1"
1499
1500rm -Rf $MINDI_TMP/target
1501mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1502
1503LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1504cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1505for i in memdisk memtest.bin memtest.img ; do
1506    j=$MINDI_LIB/$i
1507    k=$MINDI_TMP/target
1508    if [ -e "$j" ] ; then
1509        LogAll "INFO: Copying $j to $k"
1510        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1511        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1512        if [ _"$MONDO_SHARE" != _"" ]; then 
1513            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1514        fi
1515    fi
1516done
1517
1518retval=0
1519LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1520cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1521if [ $? -ne 0 ] ; then
1522    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1523    retval=$(($retval+1))
1524fi
1525LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1526cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1527if [ $? -ne 0 ] ; then
1528    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1529    retval=$(($retval+1))
1530fi
1531
1532# copy boot stuff now generated in PrepareDataDiskImage
1533if [ "$BOOT_TYPE" = "UEFI" ]; then
1534    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1535    tbc="EFI"
1536    # Also prepare a BIOS compatible boot
1537    if  [ "$target" = "ISO" ]; then
1538        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1539    fi
1540else
1541    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1542    tbc="syslinux"
1543    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1544        LogFile "----------- syslinux's conf --------------"
1545        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1546        LogFile "------------------------------------------"
1547    fi
1548    if  [ "$target" = "ISO" ]; then
1549        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1550        if [ $? -ne 0 ] ; then
1551            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1552            retval=$(($retval+1))
1553        fi
1554    fi
1555fi
1556
1557if [ "$ARCH" != "ia64" ] ; then
1558    if [ $KERNEL_IS_XEN = "yes" ]; then
1559        FindMboot32Binary
1560        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1561        if [ $? -ne 0 ] ; then
1562            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1563            retval=$(($retval+1))
1564        fi
1565        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1566        if [ $? -ne 0 ] ; then
1567            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1568            retval=$(($retval+1))
1569        fi
1570    fi
1571fi
1572
1573MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1574
1575if [ _"$MONDO_SHARE" != _"" ]; then 
1576    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1577    if [ $? -ne 0 ] ; then
1578        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1579        LogAll "       Please check the target directory."
1580        retval=$(($retval+1))
1581    fi
1582    if [ $KERNEL_IS_XEN = "yes" ]; then
1583        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1584        if [ $? -ne 0 ] ; then
1585            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1586            LogAll "       Please check the target directory."
1587            retval=$(($retval+1))
1588        fi
1589    fi
1590    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1591    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1592    if [ $? -ne 0 ] ; then
1593        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1594        LogAll "       Please check the target directory."
1595        retval=$(($retval+1))
1596    fi
1597    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1598    if [ $? -ne 0 ] ; then
1599        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1600        LogAll "       Please check the target directory."
1601        retval=$(($retval+1))
1602    fi
1603fi
1604
1605if [ -f "$MINDI_TMP/$MRCFG" ]; then
1606    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1607fi
1608
1609LogFile "----------- target dir content -----------"
1610LogFile "------------------------------------------"
1611ls -lR $MINDI_TMP/target >> $LOGFILE
1612LogFile "------------------------------------------"
1613LogFile "----------- target dir sizes -------------"
1614du -sk $MINDI_TMP/target/* >> $LOGFILE
1615LogFile "------------------------------------------"
1616
1617if [ "$retval" -ne "0" ] ; then
1618    LogFile "--------------------------------"
1619    LogFile "INFO: Size of $MINDI_TMP/target:"
1620    du -sk $MINDI_TMP/target/* >> $LOGFILE
1621    LogFile "--------------------------------"
1622    echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1623    sync
1624    umount $MINDI_TMP/target
1625    LogAll "ERROR: Problems while creating boot media."
1626    LogAll "       Please unload some of your modules and try again."
1627    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1628fi
1629
1630mkdir -p $MINDI_TMP/mpt
1631
1632if  [ "$target" = "USB" ]; then
1633    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1634    LogAll "INFO: Checking $USBDEVICE"
1635    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1636    if [ $? -ne 0 ]; then
1637        LogAll "ERROR: Unable to access $USBDEVICE"
1638        LogAll "       Make sure your USB device is plugged in"
1639        MindiExit -1
1640    fi
1641    # Some distro do auto mount at that point (Ubuntu)
1642    LogAll "INFO: Unmounting $USBPART just in case"
1643    sync
1644    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1645    if [ "$BOOT_TYPE" = "BIOS" ]; then
1646        # If your key has no MBR it may cause an issue
1647        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1648        if [ -r $MBRFILE ]; then
1649            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1650            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1651        else
1652            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1653            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1654        fi
1655    fi
1656    LogAll "INFO: Preparing $USBDEVICE"
1657    cat > $MINDI_TMP/fdisk.txt << EOF
1658d
1659d
1660d
1661d
1662n
1663p
16641
1665
1666
1667t
1668b
1669a
16701
1671w
1672EOF
1673    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1674    if [ $? -ne 0 ]; then
1675        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1676        LogAll "       Make sure your USB device is plugged in"
1677        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1678        MindiExit -1
1679    fi
1680    LogFile "fdisk build file"
1681    LogFile "----------------"
1682    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1683    LogFile "----------------"
1684    rm -f $MINDI_TMP/fdisk.txt
1685    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1686    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1687    # Calling kpartx in case devices were not created
1688    if [ -x "/sbin/kpartx" ]; then
1689        /sbin/kpartx -a $USBDEVICE
1690    fi
1691    # Some distro do auto mount at that point (Ubuntu)
1692    LogAll "INFO: Unmounting $USBPART just in case again"
1693    sync
1694    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1695    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1696    if [ "`which dmsetup`" != "" ]; then
1697        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1698        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1699            LogAll "INFO: Removing $block_id from device mapper."
1700            sleep 1
1701            dmsetup remove $block_id
1702        fi
1703    fi
1704    part=$USBPART
1705    mount_opt=""
1706else
1707    # ISO image
1708    part=$MINDI_TMP/mindi-bootroot.img
1709    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1710    # Adds 10 MB to allow for additional space
1711    size=$(($size+10000))
1712    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1713    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1714    mount_opt="-o loop"
1715fi
1716
1717LogAll "INFO: Creating a vfat filesystem on $part"
1718
1719mkfs.vfat $part 2>&1 >> $LOGFILE
1720if [ $? -ne 0 ]; then
1721    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1722    if  [ "$target" = "USB" ]; then
1723        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1724        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1725    fi
1726    MindiExit -1
1727fi
1728if  [ "$target" = "ISO" ]; then
1729    if [ "$BOOT_TYPE" = "BIOS" ]; then
1730        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1731        # and run after the formating for versions > 6 it seems
1732        syslinux $part >> $LOGFILE 2>> $LOGFILE
1733    fi
1734fi
1735LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1736mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1737if [ $? -ne 0 ]; then
1738    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1739    if  [ "$target" = "USB" ]; then
1740        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1741        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1742    fi
1743    MindiExit -1
1744fi
1745
1746LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1747mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1748if [ $? -ne 0 ] ; then
1749    LogFile "--------------------------------"
1750    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1751    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1752    LogFile "--------------------------------"
1753    sync
1754    umount $MINDI_TMP/mpt
1755    LogAll "ERROR: Problems while creating boot media."
1756    LogAll "       Please unload some of your modules and try again."
1757    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1758fi
1759
1760if  [ "$target" = "ISO" ]; then
1761    if [ "$ARCH" != "ia64" ]; then
1762        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1763    fi
1764    # ISO
1765    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1766        CMD="$ISO_CMD $ISO_OPT"
1767        MakeISO
1768    else
1769        if [ "$ARCH" = "ia64" ]; then
1770            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1771        else
1772            # UEFI
1773            echo "$CMD" | grep -q "xorriso"
1774            if [ $? -eq 0 ]; then
1775                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
1776            else
1777                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1778            fi
1779        fi
1780    fi
1781fi
1782
1783# Avoids graphical tool to keep the FS mounted
1784sync
1785umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1786
1787if  [ "$target" = "ISO" ]; then
1788    cp $part $MINDI_CACHE
1789    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
1790        # We just need the EFI dir and the boot image for this case
1791        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1792        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1793        # We need again the kernel+initrd at the root for UEFI boot at least
1794        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1795        # We need the boot image now and what mindi needs at restore time as well
1796        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1797        # Avoids graphical tool to keep the FS mounted
1798        sync
1799        umount $MINDI_TMP/mpt2
1800        LogFile "----------- target dir content -----------"
1801        LogFile "------------------------------------------"
1802        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1803        LogFile "------------------------------------------"
1804        MakeISO
1805    fi
1806else
1807    # USB
1808    if [ "$ARCH" != "ia64" ] ; then
1809        syslinux -v 2>&1 | grep -q 4.02
1810        if [ $? -eq 0 ]; then
1811            # This buggy version of syslinux requires a call to --stupid and not -s
1812            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1813            res=$?
1814        else
1815            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1816            res=$?
1817        fi
1818        if [ $res -ne 0 ] ; then
1819            LogAll "----------- syslinux's errors --------------"
1820            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1821            LogAll "------------------------------------------"
1822            LogAll "ERROR: Failed to create USB image."
1823        else
1824            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1825        fi
1826        rm -f $MINDI_TMP/syslinux.log
1827    else
1828        LogAll "ERROR: No USB boot support for ia64"
1829        MindiExit -1
1830    fi
1831fi
1832}
1833
1834
1835OfferToMakeBootableUSB() {
1836
1837local i files
1838
1839if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1840    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1841    read i
1842    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1843    if [ "$USBDEVICE" = "" ]; then
1844        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1845        read dev
1846        USBDEVICE=$dev
1847    fi
1848    echo "WARNING: This will erase all content on $USBDEVICE"
1849    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1850    read i
1851    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1852else
1853    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1854        Die "No USBDEVICE environment variable declared, aborting"
1855    fi
1856fi
1857USBPART="${USBDEVICE}1"
1858
1859MakeBootableDevice USB
1860}
1861
1862
1863OfferToMakeBootableISO() {
1864
1865local i files
1866
1867if [ -z "$ISO_CMD" ]; then
1868    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1869    return
1870fi
1871
1872if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1873    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1874    read i
1875    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1876fi
1877
1878MakeBootableDevice ISO
1879
1880}
1881
1882
1883MakeMessageFile() {
1884   
1885    if [ -x "/bin/lsb_release" ]; then
1886        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1887    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1888        DESC="Arch Linux"
1889        if [ -r /var/log/pacman.log ]; then
1890            # there are no releases but we can get the last system upgrade
1891            # Output example:   Arch Linux [2011-03-03 01:39]
1892            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1893        fi
1894    elif [ -x "/etc/os-release" ]; then
1895        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1896    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1897        # For pb >= 0.9.8
1898        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1899    elif [ -r /etc/issue.net ]; then
1900        DESC=`head -1 /etc/issue.net`
1901    elif [ -r /etc/issue ]; then
1902        DESC=`head -1 /etc/issue`
1903    else
1904        DESC="Unknown desc"
1905    fi
1906    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1907    if [ _"$MONDO_SHARE" != _"" ]; then
1908        if [ "$CDRECOVERY" != "yes" ] ; then
1909            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1910                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1911                echo -en "$BOOT_MEDIA_MESSAGE"
1912            elif [ ! "$MINDI_TMP" ] ; then
1913                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1914                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1915                    echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1916                fi
1917            else
1918                echo -en "$BOOT_MEDIA_MESSAGE"
1919            fi
1920        else
1921            echo -en "\
1922To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1923CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1924        fi
1925    fi
1926
1927    # Also create the other help screens
1928    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1929    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1930    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1931}
1932
1933
1934MakeBootConfFile() {
1935    local options i ooo
1936    options=""
1937    # Type of boot file (elilo or syslinux/isolinux)
1938    type=$1
1939    if [ "$type" = "elilo" ]; then
1940        sep="="
1941        sepdef="="
1942    else
1943        sep=" "
1944        sepdef=" "
1945        if [ "$type" = "grub" ]; then
1946            sepdef="="
1947        fi
1948    fi
1949
1950    # Generic header for conf file
1951    if [ "$type" = "elilo" ]; then
1952        echo -en "prompt\n"
1953    elif [ "$type" = "grub" ]; then
1954        echo -en "pause Press a key when ready to restore\n"
1955    elif [ "$type" = "grub2" ]; then
1956        echo -en "set "
1957    else
1958        # syslinux family
1959        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1960    fi
1961
1962    # Compute which default option to boot from
1963    echo -en "default${sepdef}"
1964    if [ "$CDRECOVERY" = "yes" ] ; then
1965        if [ "$type" = "grub" ]; then
1966            # TODO: Which num ???
1967            echo -en "0\n"
1968        else
1969            echo -en "RESTORE\n"
1970        fi
1971    # In case it's mondoarchive
1972    elif [ _"$MONDO_SHARE" != _"" ]; then
1973        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1974            if [ "$type" = "grub" ]; then
1975                echo -en "3\n"
1976            else
1977                echo -en "iso\n"
1978            fi
1979        else
1980            if [ "$type" = "grub" ]; then
1981                echo -en "1\n"
1982            else
1983                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1984            fi
1985        fi
1986    else
1987        if [ "$type" = "grub" ]; then
1988            echo -en "0\n"
1989        else
1990            echo -en "expert\n"
1991        fi
1992    fi
1993
1994    # Handle timeout
1995    if [ "$type" = "grub" ]; then
1996        sep='='
1997    fi
1998    if [ "$CDRECOVERY" != "yes" ] ; then
1999        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
2000    else
2001        echo -en "timeout${sep}10000\n"
2002    fi
2003    echo -en "\n"
2004
2005    # prepare which labels will be generated
2006    if [ "$CDRECOVERY" = "yes" ] ; then
2007        options="RESTORE expert"
2008    else
2009        if [ _"$MONDO_SHARE" != _"" ]; then
2010            options="interactive expert compare iso nuke isonuke"
2011        else
2012            options="expert"
2013        fi
2014    fi
2015
2016    # Generate rest of conf file
2017    for i in $options ; do
2018        ooo=$i
2019        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2020        if [ "$type" = "elilo" ]; then
2021            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2022        elif [ "$type" = "grub" ]; then
2023            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2024        elif [ "$type" = "grub2" ]; then
2025            if [ "$BOOT_TYPE" = "UEFI" ]; then
2026                lorder="linuxefi"
2027                iorder="initrdefi"
2028            else
2029                lorder="linux"
2030                iorder="initrd"
2031            fi
2032            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2033        else
2034            ps="/"
2035            if [ $KERNEL_IS_XEN = "no" ]; then
2036                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2037            else
2038                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2039            fi
2040        fi
2041        echo -en "$outstr"
2042    done
2043    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2044        if [ "$type" = "elilo" ]; then
2045            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2046            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2047        elif [ "$type" = "grub" ]; then
2048            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2049        elif [ "$type" = "grub2" ]; then
2050            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2051        else
2052            ps="/"
2053            if [ "$type" = "syslinux" ]; then
2054                ps=""
2055            fi
2056            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2057            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2058        fi
2059    fi
2060}
2061
2062ParseModprobeForIncludes() {
2063local MODPROBE_CONF mpincfile includes include
2064
2065MODPROBE_CONF=/etc/modprobe.conf
2066mpincfile=$1
2067touch $mpincfile
2068if [ -a $MODPROBE_CONF ]; then
2069    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2070    if [ -n "$includes" ]; then
2071        for include in $includes
2072        do
2073            if [ -a "$include" ]; then
2074                echo $include >> $mpincfile
2075            fi
2076        done
2077    fi
2078fi
2079}
2080
2081
2082PrepareDataDiskImages() {
2083    local needlist bigdir diskdir res i j k lines lfiles includefile
2084
2085    rm -f $MINDI_CACHE/mindi.iso
2086    needlist=$MINDI_TMP/what-we-need.txt
2087    bigdir=$MINDI_TMP/bigdir
2088    mkdir -p $bigdir/usr/bin
2089    mkdir -p $bigdir/usr/sbin
2090    includefile=$MINDI_TMP/$$.includefile.txt
2091
2092    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2093    if [ -e "$DEPLIST_FILE" ]; then
2094        lfiles="$DEPLIST_FILE $lfiles"
2095    fi
2096    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2097    ParseModprobeForIncludes $includefile
2098    lines=$(($lines+`cat $includefile | wc -l`))
2099    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2100    res=$?
2101    rm -f $includefile
2102    ListKernelModulePaths >> $needlist
2103    if [ "$res" -ne "0" ] ; then
2104        Die "You have $res files present in dependency list\nbut absent from filesystem."
2105    fi
2106    mkdir -p $bigdir/tmp
2107    if [ _"$MONDO_SHARE" != _"" ]; then
2108        # TODO: no reason to have the cfg file stored twice
2109        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2110        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2111    fi
2112
2113    # Needs to be done after the MRCFG creation
2114    FindAndAddUserKeyboardMappingFile
2115
2116    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2117    DropOptimizedLibraries $needlist $bigdir
2118    echo -en "INFO: Assembling dependency files"
2119
2120    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2121    echo -e "$DONE"
2122
2123    # also copy io.sys and msdos.sys, if we can find them
2124    for i in `mount | cut -d' ' -f3` ; do
2125        for j in io.sys msdos.sys ; do
2126            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2127        done
2128    done
2129
2130    # master boot record, too
2131    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2132    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2133        LogAll "INFO: Backing up $i's MBR"
2134        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2135        sleep 1
2136        sync
2137        j=$i
2138        [ -h "$j" ] && j=`readlink -f $j`
2139        LogAll "INFO: Creating /dev/boot_device ($j)"
2140        mkdir -p $bigdir/dev
2141        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2142    fi
2143
2144    # Get terminfo content
2145    ti="usr/share/terminfo/l"
2146    if [ -d /$ti ]; then
2147        mkdir -p $bigdir/$ti
2148        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2149    fi
2150    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2151        cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2152        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2153        cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2154    fi
2155    if [ -d "/lib/dev-state" ]; then 
2156        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2157    fi
2158    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2159    MakeMountlist $MINDI_TMP/mountlist.txt
2160    CheckMountlist $MINDI_TMP/mountlist.txt
2161    mkdir -p $bigdir/tmp
2162    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2163    if [ _"$MONDO_SHARE" != _"" ]; then
2164        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2165    fi
2166    if [ $LVM != "false" ]; then
2167        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2168        if [ $? -ne 0 ]; then
2169            LVM="false"
2170            rm -f $bigdir/tmp/i-want-my-lvm
2171        else
2172            LogFile "Your i-want-my-lvm file content is:"
2173            LogFile "-----------------------------------"
2174            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2175            LogFile "-----------------------------------"
2176        fi
2177    fi
2178    LogFile "INFO: Your mountlist.txt file content is:"
2179    LogFile "-----------------------------------"
2180    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2181    LogFile "-----------------------------------"
2182
2183    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2184    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2185    if [ _"$MONDO_SHARE" != _"" ]; then
2186        for q in filelist.full.gz biggielist.txt ; do
2187            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2188            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2189        done
2190    fi
2191
2192    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2193    # to get it on the media (in addition to the boot part
2194    # and also to support UEFI boot mechanism
2195    bootdir=$bigdir/syslinux
2196    bootconf="$bootdir/syslinux.cfg"
2197    boottype=syslinux
2198    mkdir -p $bootdir
2199    FindLdlinux32Binary
2200    if [ "$BOOT_TYPE" != "BIOS" ]; then
2201        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2202            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2203            MindiExit -1
2204        fi
2205        # EFI or UEFI
2206        # TODO: names are hard-coded for now
2207        if [ "$BOOT_TYPE" = "UEFI" ]; then
2208            # UEFI
2209            efidir=$bigdir/EFI/BOOT
2210            # On RHEL6 grub works
2211            dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2212            dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2213            if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2214                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2215                bootconf="$efidir/BOOTX64.conf"
2216                boottype=grub
2217            elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2218                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2219                bootconf="$efidir/grub.cfg"
2220                boottype=grub2
2221            elif [ $dname = "debian" ] && [ $dver = "8" ]; then
2222                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2223                bootconf="$efidir/grub.cfg"
2224                boottype=grub2
2225            else
2226                # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2227                FindSyslinux64EFI
2228                bootbin=$SYSLINUX64EFI
2229                bootconf="$efidir/syslinux.cfg"
2230            fi
2231
2232            # Depending on the arch, the target boot file is different
2233            if [ "$ARCH" = "x86_64" ] ; then
2234                tgbin="BOOTX64.efi"
2235            elif [ "$ARCH" = "armv8" ]; then
2236                tgbin="BOOTAA64.efi"
2237            else
2238                # i?386
2239                tgbin="BOOTIA32"
2240            fi
2241        else
2242            # EFI
2243            efidir=$bootdir
2244            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2245            tgbin=$bootbin
2246            boottype=elilo
2247            bootconf="$efidir/elilo.conf"
2248        fi
2249        LogAll "INFO: Found $boottype boot type"
2250
2251        # Copy it so that CD-ROM menu entry is satisfied
2252        mountefi=0
2253        df -T | grep /boot/efi | grep -qE 'vfat'
2254        if [ $? -ne 0 ]; then
2255            mount /boot/efi
2256            if [ $? -ne 0 ]; then
2257                echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2258                MindiExit -1
2259            fi
2260            mountefi=1
2261        fi
2262        mkdir -p $efidir
2263        cp $bootbin $efidir/$tgbin
2264        if [ $mountefi -eq 1 ]; then
2265            umount /boot/efi 2>&1 > /dev/null
2266        fi
2267
2268        if [ $boottype = "syslinux" ]; then
2269            FindLdlinuxe64Binary
2270            if [ -e "$LDLINUXE64" ]; then
2271                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2272                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2273                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2274            fi
2275        fi
2276        # In all cases prepare syslinux content for BIOS mode
2277        # so that we can have multi boot mode media BIOS+UEFI
2278        if [ -e "$LDLINUXC32" ]; then
2279            LogFile "INFO: Copying $LDLINUXC32 to $bigdir/EFI"
2280            cp $LDLINUXC32 "$bigdir/EFI" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bigtdir/EFI. Did you run out of disk space?"
2281        fi
2282    else
2283        # Useful for syslinux 5.x
2284        if [ -e "$LDLINUXC32" ]; then
2285            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2286            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir. Did you run out of disk space?"
2287        fi
2288    fi
2289
2290    # Here we need to know the ramdisk_size
2291    size_of_all_tools=`du -sk $bigdir | cut -f1`
2292    export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2293    LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2294
2295    MakeBootConfFile $boottype > $bootconf
2296    LogFile "Boot Conf file $bootconf content is:"
2297    LogFile "------------------------------------"
2298    cat $bootconf >> $LOGFILE
2299    LogFile "------------------------------------"
2300    if [ "$BOOT_TYPE" = "UEFI" ]; then
2301        # Also generate the syslinux conf
2302        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2303        LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2304        LogFile "---------------------------------------------------"
2305        cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2306        LogFile "---------------------------------------------------"
2307    fi
2308
2309    echo -en "INFO: Tarring and zipping the data content..."
2310    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2311    LogFile "Size of the data content"
2312    LogFile "------------------------"
2313    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2314    LogFile "------------------------"
2315    echo -e "$DONE"
2316
2317    [ "$bigdir" != "/" ] && rm -rf $bigdir
2318    rm -f $needlist
2319}
2320
2321
2322Prompt() {
2323    echo -en "$1"
2324    read line
2325}
2326
2327
2328ReadLine() {
2329    local i incoming
2330    read incoming
2331    i=0
2332    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2333        i=$(($i+1))
2334        read incoming
2335    done
2336    echo "$incoming"
2337}
2338
2339
2340SizeOfPartition() {
2341    local devpath drive res stub
2342    device=$1
2343    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2344        Die "Cannot find $device's size - is your /etc/fstab sane?"
2345    fi
2346    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2347        res=`SizeOfRaidPartition $device`
2348        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2349        echo "$res"
2350        return 0
2351    fi
2352    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2353    res=`$FDISK -s $device 2>> $LOGFILE`
2354    # end patch
2355    # take only the first in case of multiple mount (cifs, nfs, ...)
2356    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2357    [ "$res" = "" ] && res="-1"
2358    echo $res
2359    return 0
2360}
2361
2362
2363SizeOfRaidPartition() {
2364    local real_dev smallest_size silly tmp
2365
2366    silly=999999999
2367    smallest_size=$silly
2368
2369    for real_dev in `GetRaidDevMembers $1` ; do
2370        tmp=`SizeOfPartition $real_dev`
2371        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2372    done
2373
2374    if [ "$smallest_size" = "$silly" ] ; then
2375        echo "-1"
2376        return 1
2377    else
2378        echo "$smallest_size"
2379        return 0
2380    fi
2381}
2382
2383
2384StripExecutable()
2385{
2386    local tmpfile
2387
2388    tmpfile=$MINDI_TMP/stripped.$$.dat
2389    [ -d "$1" ] || [ -h "$1" ] && return
2390    cp -f $1 $tmpfile 2>> $LOGFILE
2391    strip $tmpfile 2> /dev/null
2392    if [ $? -eq 0 ] ; then
2393        cp -f $tmpfile $1 2>> $LOGFILE
2394        LogFile "INFO: Stripped binary $2"
2395    fi
2396    rm -f $tmpfile
2397}
2398
2399KernelVer() {
2400        local fkern_ver fname
2401
2402        fname=$1
2403        file $fname | grep -q gzip
2404        if [ $? -eq 0 ] ; then
2405            # Used by ia64
2406            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2407        else
2408            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2409        fi
2410        echo "$fkern_ver"
2411}
2412
2413
2414# WARNING: This function should just echo the final result !!!
2415#
2416TryToFindKernelPath() {
2417    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2418
2419    we_want_version=$KERVERRUN
2420    possible_kernels=""
2421    duff_kernels=""
2422    output=""
2423
2424    if [ "$ARCH" = "ia64" ] ; then
2425       root="/boot/efi/efi"
2426    else
2427       root="/"
2428    fi
2429    # See if we're booted from a Xen kernel
2430    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2431    if [ -f /proc/xen/capabilities ]; then
2432        # It's a Xen kernel
2433        KERNEL_IS_XEN="yes"
2434        LogFile "INFO: It's a Xen kernel..."
2435    fi
2436
2437    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2438        [ ! -e "$fname" ] && continue
2439        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2440        fkern_ver=`KernelVer $fname`
2441        [ "$fkern_ver" = "" ] && continue
2442        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2443        [ -f "$fname" ] || continue
2444        [ -h "$fname" ] && continue
2445        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2446        file $fname | grep -q gzip
2447        if [ $? -eq 0 ] ; then
2448            # Used by ia64
2449            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2450                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2451                duff_kernels="$fname $duff_kernels"
2452            else
2453                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2454                possible_kernels="$fname $possible_kernels"
2455            fi
2456        else
2457            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2458                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2459                duff_kernels="$fname $duff_kernels"
2460            else
2461                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2462                possible_kernels="$fname $possible_kernels"
2463            fi
2464        fi
2465    done
2466    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2467        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
2468    fi
2469    if [ ! "$possible_kernels" ] ; then
2470        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2471        possible_kernels="$duff_kernels"
2472        if [ ! "$possible_kernels" ] ; then
2473            LogAll "INFO: Sorry, no duff kernels either"
2474        else
2475            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2476            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2477        fi
2478    fi
2479    if [ $KERNEL_IS_XEN = "yes" ]; then
2480        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2481        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2482    fi
2483    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2484    noof_kernels=`CountItemsIn "$possible_kernels"`
2485    if [ "$noof_kernels" -eq "0" ] ; then
2486        LogAll "Could not find your kernel."
2487        if [ -e "/boot/vmlinuz" ] ; then
2488            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2489            output=/boot/vmlinuz
2490        else
2491            output=""
2492        fi
2493    elif [ "$noof_kernels" -eq "1" ] ; then
2494        kp=`echo "$possible_kernels" | sed s/' '//`
2495        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2496        output="$kp"
2497    else
2498        for i in $possible_kernels ; do
2499            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2500                LogAll "INFO: OK, I used my initiative and found that "
2501                LogAll "INFO: $i is probably your kernel. "
2502                output="$i"
2503                break
2504            fi
2505        done
2506        if [ ! -n "$output" ]; then
2507            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2508                output=/boot/vmlinuz
2509                LogFile "INFO: Schlomo, this one's for you."
2510            else
2511                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2512                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2513                LogFile "INFO: $possible_kernels"
2514                output=""
2515            fi
2516        fi
2517    fi
2518    if [ $KERNEL_IS_XEN = "yes" ]; then
2519        if [ "$noof_xenkernels" -eq "0" ]; then
2520            xenkernelpath=""
2521        elif [ "$noof_xenkernels" -eq "1" ]; then
2522            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2523            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2524        else
2525            for i in $possible_xenkernels ; do
2526                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2527                    LogFile "INFO: OK, I used my initiative and found that "
2528                    LogFile "INFO: $i is probably your Xen kernel. "
2529                    xenkernelpath="$i"
2530                    break
2531                fi
2532            done
2533            if [ ! -n "$xenkernelpath" ]; then
2534                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2535                if [ ! -n "$new_possible_xenkernels" ]; then
2536                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2537                    LogFile "INFO: Using $xenkernelpath"
2538                else
2539                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2540                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2541                    LogFile "INFO: $possible_xenkernels"
2542                    output=""
2543                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2544                    LogFile "INFO: Using $xenkernelpath"
2545                fi
2546            fi
2547        fi
2548        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2549            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2550        fi
2551    fi
2552    #LogAll "TryToFindKernelPath found $output"
2553    echo "$output"
2554}
2555
2556
2557MakeBootInitFile() {
2558    local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2559
2560    tgz_dir_fname=$1
2561    rdz_fname=$2
2562    kernelsize=$3
2563    tempfile=$MINDI_TMP/temp.rd
2564    res=0 
2565    templog=$MINDI_TMP/$$.log
2566    > $templog
2567
2568    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2569    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2570    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2571    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2572    mkdir -p $mountpoint
2573    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2574
2575    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2576    for d in bin sbin lib lib64; do
2577        if [ -h "/$d" ]; then
2578            thelink=`readlink /$d`
2579            mkdir -p $mountpoint/$thelink || LogAll "ERROR: Unable to create $thelink in $mountpoint."
2580            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2581            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2582                rmdir $mountpoint/$d
2583            fi
2584            if [ ! -h $mountpoint/$d ]; then
2585                rm -f $mountpoint/$d 2> /dev/null
2586                (cd $mountpoint ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2587            fi
2588        fi
2589    done
2590
2591    LogFile "INFO: what is now in $mountpoint"
2592    ls -al $mountpoint >> $LOGFILE
2593   
2594    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2595    # copy from rootfs into mountpoint
2596    LogAll "INFO: Copying Mindi files onto $mountpoint"
2597    for f in $tgz_dir_fname/*; do 
2598        if [ ! -r $f ]; then
2599            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2600        else
2601            cp -af $f $mountpoint 2>&1 >> $LOGFILE
2602        fi
2603    done
2604    (cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2605    (cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2606
2607    (cd $mountpoint/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2608
2609    for w in insmod.static insmod.static.old ; do
2610        s=`which $w 2> /dev/null`
2611        if [ -e "$s" ] ; then
2612            tar cf - -C / $s 2> /dev/null | (cd $mountpoint ; tar xf -)
2613        fi
2614    done
2615
2616    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2617   
2618    # Copy of files mandatory for ssh to automate mount if sshfs is used
2619    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2620    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2621    cat > $mountpoint/tmp/myssh << EOF
2622ssh -o StrictHostKeyChecking=no $*
2623EOF
2624    chmod 755 $mountpoint/tmp/myssh
2625
2626    # Copy of files mandatory for ld.so
2627    cp -a /etc/ld.so.c* $mountpoint/etc
2628
2629    # Handle the case where busybox and mount are dynamically linked
2630    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2631    if [ $? -eq 0 ]; then
2632        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2633        rm -f $mountpoint/bin/mount
2634    fi
2635
2636    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2637    echo -en "INFO: Gathering dependencies of required files..."
2638    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2639    lines=`cat $DEPLIST_DIR/minimal.conf | grep -vE " *#.*|^#" | sort -u`
2640    noof_lines=`echo $lines | wc -w`
2641    progress=0
2642    for f in $lines; do
2643        if [ -d $f ]; then
2644            for g in `find $f`; do 
2645                echo $g >> $MINDI_TMP/minimal.lis
2646                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2647            done
2648        else 
2649            if [ -r $f ]; then
2650                echo $f >> $MINDI_TMP/minimal.lis
2651                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2652            fi
2653        fi
2654        progress=$(($progress+1))
2655        LogProgress $progress $noof_lines
2656    done
2657    echo -e "$DONE"
2658    echo -en "INFO: Processing all dependencies links..."
2659    lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
2660    noof_lines=`echo $lines | tr ' ' '\n' | wc -l`
2661    progress=0
2662    for f in $lines; do
2663        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2664        progress=$(($progress+1))
2665        LogProgress $progress $noof_lines
2666    done
2667    echo -e "$DONE"
2668    # Initial / are trucated by tar
2669    finallist=""
2670    # Remove directories from the list, as tar/cp will create them anyway
2671    # and it may hurt if /lib is in it as on Debian/Ubuntu
2672    # recent bash says that -d is true for a link to a dir !
2673    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2674        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2675            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2676            if [ ! -e "$mountpoint/$f" ]; then
2677                finallist="$finallist $f"
2678            fi
2679        fi
2680    done
2681    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2682
2683    fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2684    LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
2685    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogAll "WARNING: Problem in minimal analysis" $templog
2686
2687    # In case target /bin dir still doesn't exist, create it before using it
2688    if [ ! -d $mountpoint/bin ]; then
2689        mkdir -p $mountpoint/bin
2690    fi
2691
2692    # For older distributions expecting /sbin/init provides it
2693    if [ ! -e "$mountpoint/sbin/init" ]; then
2694        (cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2695    fi
2696
2697    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2698    (cd $mountpoint ; ln -sf /bin/bash bin/sh)
2699    LogFile "INFO: Using bash as default shell"
2700
2701    # Avoids an issue on some distro (RHEL5)
2702    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2703
2704    # Management of udev (which includes modprobe in rules)
2705    ps auxww | grep -v grep | grep -qw udevd
2706    if [ $? -eq 0 ]; then
2707        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2708        LogFile "INFO: udev device manager found"
2709        tar cf - -C / /etc/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /etc/udev analysis" $templog
2710        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2711        rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2712        # Do not do it if it's a link (Ubuntu 64 bits #503)
2713        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2714            tar cf - -C / /lib64/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2715        fi
2716        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2717            tar cf - -C / /lib32/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2718        fi
2719        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2720            tar cf - -C / /lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib/udev analysis" $templog
2721        fi
2722        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2723            tar cf - -C / /usr/lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2724        fi
2725        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2726            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2727            lis=""
2728            # Get only the files which exist in that list
2729            # and potentially their symlink structure
2730            for i in $lis2; do
2731                if [ -h $i ]; then
2732                    j=$i
2733                    while [ -h $j ]; do
2734                        lis="$lis $j"
2735                        j=`readlink -f $j`
2736                    done
2737                    lis="$lis $j"
2738                elif [ -d $i ]; then
2739                    lis3="$lis3 $i"
2740                elif [ -f $i ]; then
2741                    lis="$lis $i"
2742                fi
2743            done
2744            # And their deps
2745            LocateDeps $lis > $MINDI_TMP/udev.lis
2746            for i in $lis; do
2747                if [ "`echo $i | cut -c1`" = "/" ]; then
2748                    j=`echo $i | cut -c2-`
2749                    [ "$j" != "" ] && rm -f $mountpoint/$j
2750                fi
2751                echo "$i" >> $MINDI_TMP/udev.lis
2752            done
2753            finallist=""
2754            # Remove directories from the list, as tar/cp will create them anyway
2755            # and it may hurt if /lib is in it as on Debian/Ubuntu
2756            # recent bash says that -d is true for a link to a dir !
2757            for f in `sort -u $MINDI_TMP/udev.lis`; do
2758                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2759                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2760                    if [ ! -e "$mountpoint/$f" ]; then
2761                        finallist="$finallist $f"
2762                    fi
2763                fi
2764            done
2765            # But adds the directory useful for udev in $lis3
2766            fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2767            LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
2768            cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog  || LogAll "WARNING: Problem in udev.lis analysis" $templog
2769            rm -f $MINDI_TMP/udev.lis
2770        else
2771            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2772            LogAll "         mindi will use static devices which may cause problems"
2773            rm -f $mountpoint/tmp/USE-UDEV
2774        fi
2775    fi
2776
2777    # Management of potential HW info (ProLiant only at the moment)
2778    rm -rf $MINDI_CACHE/bkphw
2779    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2780    if [ -d $MINDI_CACHE/bkphw ]; then
2781        LogAll "INFO: Hardware Information found and saved ..."
2782        cp -rp $MINDI_CACHE/bkphw $mountpoint
2783        if [ -f $MINDI_CACHE/tools.files ]; then
2784            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2785            LocateDeps $lis > $MINDI_TMP/tools.lis
2786            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
2787        fi
2788        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2789            mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2790            chmod 755 $mountpoint/mindi-rsthw
2791        fi
2792        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2793    fi
2794
2795    # Management of perl scripts delivered needed at restore time
2796    LogAll "INFO: Analyzing perl modules dependencies..."
2797    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2798    LogFile "DBG4: Perl Modules found:"
2799    LogFile "-------------------------"
2800    cat $MINDI_TMP/perl.lis >> $LOGFILE
2801    LogFile "-------------------------"
2802    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
2803
2804    for w in cdrom groovy-stuff ; do
2805        mkdir -p mnt/$w
2806    done
2807
2808    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
2809
2810    needed_modules=""
2811    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2812
2813    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2814        # For PXE boot
2815        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2816    fi
2817    for i in $DENY_MODS; do
2818        LogFile "INFO: Removing $i from the list of modules to load"
2819        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2820    done
2821
2822    if [ "${kernelname}" != "" ]; then
2823        needed_modules_path=lib/modules/${kernelname}
2824        mkgmopt="-k ${kernelname}"
2825    else
2826        needed_modules_path=lib/modules/$KERVERRUN
2827        mkgmopt="-k $KERVERRUN"
2828    fi
2829
2830    [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2831    LogAll "INFO: Analyzing kernel modules dependencies..."
2832    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2833
2834    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2835    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
2836
2837    # Uncompress modules if not using udev and native modprobe
2838    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2839        for i in $needed_modules; do
2840            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2841                gunzip -f $mountpoint/$i
2842            fi
2843            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2844                bunzip2 -f $mountpoint/$i
2845            fi
2846            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2847                unxz -f $mountpoint/$i
2848            fi
2849            LogFile "INFO: Uncompressing $i"
2850        done
2851    fi
2852
2853    # Also copy modules.* in case of udev so that normal modprobe works
2854    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
2855
2856    # Copy FW in case some drivers needs it
2857    for d in "/lib" "/usr/lib"; do
2858        if [ -d "$d/firmware" -a ! -h $d ]; then
2859            cp -a "$d/firmware" "$mountpoint/$d"
2860        fi
2861    done
2862
2863    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2864    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2865        if [ -d "$d/multipath" -a ! -h $d ]; then
2866            cp -a "$d/multipath" "$mountpoint/$d"
2867        fi
2868    done
2869
2870    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2871    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2872
2873    # Copy an additional ProLiant tool for OBDR support
2874    if [ -f $MINDI_TMP/OBDR ]; then
2875        found=0
2876        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2877            mkdir -p $mountpoint/usr/bin
2878            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2879            LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2880            found=1
2881        fi
2882        if [ -x /usr/bin/sg_wr_mode ]; then
2883            mkdir -p $mountpoint/usr/bin
2884            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2885            LocateDeps $lis > $MINDI_TMP/obdr.lis
2886            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
2887            LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2888            found=1
2889        fi
2890        if [ $found -eq 0 ]; then
2891            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2892            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2893        fi
2894    fi
2895
2896    if [ ! -e "/sbin/devfsd" ]; then
2897        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2898        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2899        rm -f $mountpoint/sbin/devfsd
2900    fi
2901    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2902    if [ _"$MONDO_SHARE" != _"" ]; then
2903        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2904        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2905        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2906        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2907        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2908    fi
2909
2910    # Create module list to load at restore time
2911    rm -f $mountpoint/tmp/modules
2912    for m in $CDROM_MODS; do
2913        echo $m >> $mountpoint/tmp/modules
2914    done
2915
2916    mkdir -p $mountpoint/proc
2917    LogFile "---------------------------"
2918    LogFile "Size of initial ramdisk:"
2919    LogFile "---------------------------"
2920    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2921    LogFile "---------------------------"
2922    LogFile "Content of initial ramdisk:"
2923    LogFile "---------------------------"
2924    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2925    LogFile "---------------------------"
2926
2927    # Determine what filesystem to use for initrd image
2928    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2929    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2930    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2931    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2932        # say what will be used
2933        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2934        # kernel expects linuxrc in ext2 filesystem
2935        (cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2936        # unmount loop filesystem and create image file using the standard approach
2937        sync
2938        umount $mountpoint || Die "Cannot unmount $tempfile"
2939        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2940        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2941            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2942        else
2943            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2944        fi
2945        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2946        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2947        rm -f ${rdz_fname}.tmp
2948        # log that we are done
2949    elif [ "$gvFileSystem" = "initramfs" ]; then
2950        # say what will be used
2951        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2952        # make sure that cpio is there
2953        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2954        # kernel expects init in cpio filesystem
2955        (cd "$mountpoint" ; ln -sf usr/sbin/init init)
2956        # create cpio image file and unmount loop filesystem
2957        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
2958        sync
2959        umount $mountpoint || Die "Cannot unmount $tempfile"
2960        # log that we are done
2961    else
2962        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2963    fi
2964
2965    if [ "$res" -eq "0" ] ; then
2966        LogAll "INFO: MakeBootInitFile finished without error."
2967    else
2968        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
2969    fi
2970    return 0
2971}
2972
2973
2974##############################################################################
2975#----------------------------------- Main -----------------------------------#
2976##############################################################################
2977
2978# Now we can create what we need
2979mkdir -p $MINDI_TMP
2980
2981# --nolog needs to be first, and is used in analyze-my-lvm
2982if [ "$1" = "--nolog" ] ; then
2983    shift
2984    LOGFILE=/dev/stderr
2985else
2986    > $LOGFILE
2987fi
2988if [ "$1" = "--printvar" ] ; then
2989    shift
2990    if [ _"$1" != _"" ] ; then
2991        set | grep -Ew "^$1" | cut -d= -f2
2992    fi
2993    exit 0
2994fi
2995
2996LogFile "mindi v$MINDI_VERSION"
2997LogFile "-----------------------------"
2998LogFile "Start date : `date`"
2999LogFile "-----------------------------"
3000LogFile "$ARCH architecture detected"
3001LogFile "mindi called with the following arguments:"
3002echo "$@">> $LOGFILE
3003LogFile "-----------------------------"
3004LogFile "pbdistrocheck results:"
3005pbdistrocheck >> $LOGFILE
3006LogFile "-----------------------------"
3007
3008# Log some capital variables
3009[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3010[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3011LogFile "MONDO_SHARE = $MONDO_SHARE"
3012LogFile "MINDI_LIB = $MINDI_LIB"
3013LogFile "MINDI_SBIN = $MINDI_SBIN"
3014LogFile "MINDI_CONF = $MINDI_CONF"
3015# Purge from potential old run
3016if [ _"$MINDI_CACHE" = _"" ]; then
3017    Die "MINDI_CACHE undefined"
3018else
3019    LogFile "MINDI_CACHE = $MINDI_CACHE"
3020fi
3021
3022if [ -f $MINDI_CONFIG ]; then
3023    LogFile "-----------------------------"
3024    LogFile " Mindi configuration file    "
3025    LogFile "-----------------------------"
3026    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3027    LogFile "-----------------------------"
3028fi
3029LogFile "In Mindi"
3030LogFile "--------"
3031LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3032LogFile "--------"
3033
3034trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3035
3036# Sanity checks
3037which which > /dev/null 2> /dev/null || Die "Please install 'which'."
3038which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
3039which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3040which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
3041if which awk &> /dev/null ; then
3042    if ! which gawk &> /dev/null ; then
3043        LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3044    fi
3045fi
3046which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3047[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3048
3049[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3050
3051# Update the PATH variable if incomplete
3052if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3053    PATH=$PATH:/sbin:/usr/sbin
3054    export PATH
3055    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3056    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3057    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3058fi
3059
3060if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3061    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3062fi
3063
3064### TODO
3065### Fix as it's not mandatory on ia64
3066if [ "$ARCH" = "ia64" ] ; then
3067    if which elilo &> /dev/null ; then
3068        LILO_EXE=elilo
3069    else
3070        LILO_EXE=`which false 2> /dev/null`
3071    fi
3072else
3073    FindIsolinuxBinary
3074fi
3075trap "Aborted" SIGTERM
3076DONE="\r\t\t\t\t\t\t\t\tDone.         "
3077kernelpath=""
3078MONDO_ROOT=/var/cache/mondo
3079mkdir -p $MONDO_ROOT
3080
3081if [ -d "/proc/lvm" ]; then
3082    # LVM v1
3083    LVMCMD=""
3084    LVM="v1"
3085elif [ -d "/dev/mapper" ]; then
3086    # LVM v2
3087    LVMCMD="lvm"
3088    LVM="v2"
3089else
3090    LVM="false"
3091fi
3092
3093if [ -e "/proc/cmdline" ]; then
3094    CMDLINE="/proc/cmdline"
3095elif [ -e "/tmp/cmdline" ]; then
3096    CMDLINE="/tmp/cmdline"
3097else
3098    CMDLINE="/dev/null"
3099fi
3100
3101LogFile "INFO: LVM set to $LVM"
3102LogFile "----------"
3103LogFile "mount result:"
3104LogFile "-------------"
3105mount >> $LOGFILE
3106if [ -e "/etc/raidtab" ]; then
3107    LogFile "-------------"
3108    LogFile "/etc/raidtab content:"
3109    LogFile "-------------"
3110    cat /etc/raidtab >> $LOGFILE
3111else
3112    LogFile "No file /etc/raidtab"
3113fi
3114if [ -e "/etc/mdadm.conf" ]; then
3115    LogFile "-------------"
3116    LogFile "/etc/mdadm.conf content:"
3117    LogFile "-------------"
3118    cat /etc/mdadm.conf >> $LOGFILE
3119else
3120    LogFile "-------------"
3121    LogFile "No file /etc/mdadm.conf"
3122fi
3123LogFile "-------------"
3124LogFile "cat $CMDLINE"
3125LogFile "-------------"
3126cat $CMDLINE >> $LOGFILE
3127LogFile "-------------"
3128LogFile "cat /proc/swaps:"
3129LogFile "-------------"
3130cat /proc/swaps >> $LOGFILE
3131LogFile "-------------"
3132if [ -e "/proc/mdstat" ]; then
3133    LogFile "cat /proc/mdstat:"
3134    LogFile "-------------"
3135    cat /proc/mdstat >> $LOGFILE
3136else
3137    LogFile "No pseudo file /proc/mdstat"
3138fi
3139LogFile "-------------"
3140LogFile "cat /proc/partitions:"
3141LogFile "-------------"
3142cat /proc/partitions >> $LOGFILE
3143LogFile "-------------"
3144LogFile "cat /proc/filesystems:"
3145LogFile "-------------"
3146cat /proc/filesystems >> $LOGFILE
3147LogFile "-------------"
3148LogFile "lsmod result:"
3149LogFile "-------------"
3150lsmod >> $LOGFILE
3151MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3152if [ -x /usr/sbin/esxcfg-module ]; then
3153    LogFile "-------------"
3154    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3155    LogFile "-------------"
3156    LogFile "VMWare modules"
3157    LogFile "-------------"
3158    /usr/sbin/esxcfg-module -l >> $LOGFILE
3159    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3160fi
3161LogFile "-------------" 
3162LogFile "FORCE_MODS:"
3163LogFile "-------------"
3164LogFile "$FORCE_MODS"
3165LogFile "-------------"
3166LogFile "DENY_MODS:"
3167LogFile "-------------"
3168LogFile "$DENY_MODS"
3169LogFile "-------------"
3170LogFile "df result:"
3171LogFile "----------"
3172df -aT >> $LOGFILE
3173LogFile "-------------"
3174LogFile "df -i result:"
3175LogFile "----------"
3176df -i >> $LOGFILE
3177LogFile "-------------"
3178if [ -r /boot/grub/menu.lst ]; then
3179    LogFile "-------------"
3180    LogFile "INFO: /boot/grub/menu.lst content"
3181    LogFile "-------------"
3182    cat /boot/grub/menu.lst >> $LOGFILE
3183    LogFile "-------------"
3184fi
3185if [ -r /boot/grub/grub.conf ]; then
3186    LogFile "-------------"
3187    LogFile "INFO: /boot/grub/grub.conf content"
3188    LogFile "-------------"
3189    cat /boot/grub/grub.conf >> $LOGFILE
3190    LogFile "-------------"
3191fi
3192if [ -r /boot/grub/grub.cfg ]; then
3193    LogFile "-------------"
3194    LogFile "INFO: /boot/grub/grub.cfg content"
3195    LogFile "-------------"
3196    cat /boot/grub/grub.cfg >> $LOGFILE
3197    LogFile "-------------"
3198fi
3199if [ -r /boot/grub/device.map ]; then
3200    LogFile "-------------"
3201    LogFile "INFO: /boot/grub/device.map content"
3202    LogFile "-------------"
3203    cat /boot/grub/device.map >> $LOGFILE
3204    LogFile "-------------"
3205fi
3206if [ -r /etc/lilo.conf ]; then
3207    LogFile "-------------"
3208    LogFile "INFO: /etc/lilo.conf content"
3209    LogFile "-------------"
3210    cat /etc/lilo.conf >> $LOGFILE
3211fi
3212if [ -d /boot/efi ]; then
3213    gcf=`find /boot/efi -name 'grub.c*'`
3214    if [ _"$gcf" = _"" ]; then
3215        LogFile "Found a /boot/efi directory without a grub config file in it"
3216    else
3217        LogFile "-------------"
3218        LogFile "INFO: $gcf content"
3219        LogFile "-------------"
3220        cat $gcf >> $LOGFILE
3221        LogFile "-------------"
3222    fi
3223fi
3224
3225LogFile "Full fdisk info"
3226LogFile "---------------"
3227$FDISK -l >> $LOGFILE
3228LogFile "----------------"
3229
3230# Compute libata version
3231laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3232# If libata v2 is used then remove ide-generic as it will perturbate boot
3233if [ "`echo $MODULES | grep libata`" ]; then
3234    if [ "$laver" = "2" ]; then
3235        DENY_MODS="$DENY_MODS ide-generic"
3236        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3237        LogFile "-------------"
3238    fi
3239fi
3240
3241# Check for McAfee which disturbs the access to some files (tgz in articular)
3242if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3243    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3244    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3245    LogFile "WARNING: You have two options:"
3246    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3247    LogFile "WARNING:  - Disable the scanner during the backup"
3248fi
3249
3250#
3251# If we have a USB device we need to store info
3252# and remove it from the parameters line
3253#
3254if [ "$#" -ne "0" ] ; then
3255    if [ "$1" = "--usb" ] ; then
3256        shift
3257        USBDEVICE=$1
3258        if [ _"$USBDEVICE" = _"" ]; then
3259            Die "No USB device specified"
3260        fi
3261        shift
3262    fi
3263fi
3264
3265if [ "$#" -ne "0" ] ; then
3266    if [ "$1" = "--findkernel" ] ; then
3267        resk=`TryToFindKernelPath`
3268        # Avoids logfile content for mondo
3269        export MONDO_SHARE=""
3270        if [ "$resk" = "" ] ; then
3271            if [ $KERNEL_IS_XEN = "yes" ]; then
3272                echo "$xenkernelpath"
3273                LogFile "INFO: xenkernelpath = $xenkernelpath"
3274                MindiExit 0
3275            else
3276                MindiExit -1
3277            fi
3278        else
3279            echo "$resk"
3280            LogFile "INFO: kernelpath = $resk"
3281            MindiExit 0
3282        fi
3283    elif [ "$1" = "--locatedeps" ] ; then
3284        [ ! "$2" ] && Die "Please specify the binary to look at"
3285        LocateDeps $*
3286        # Avoids logfile content for mondo
3287        export MONDO_SHARE=""
3288        MindiExit $?
3289    elif [ "$1" = "--readalllink" ] ; then
3290        [ ! "$2" ] && Die "Please specify the binary to look at"
3291        # Avoids logfile content for mondo
3292        export MONDO_SHARE=""
3293        mr-read-all-link $2
3294        MindiExit $?
3295    elif [ "$1" = "--makebcf" ] ; then
3296        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3297        MakeBootConfFile $2
3298        MindiExit 0
3299    elif [ "$1" = "--makemessage" ] ; then
3300        MakeMessageFile | cut -c1-80
3301        MindiExit 0
3302    elif [ "$1" = "--makemountlist" ] ; then
3303        [ ! "$2" ] && Die "Please specify the output file"
3304        MakeMountlist $2
3305        CheckMountlist $2
3306        # Avoids logfile content for mondo
3307        export MONDO_SHARE=""
3308        MindiExit $?
3309    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3310        echo "Mindi v$MINDI_VERSION"
3311        # Avoids logfile content for mondo
3312        export MONDO_SHARE=""
3313        MindiExit 0
3314    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3315        MONDO_TMP=$2
3316        # Change MINDI_TMP for the one provided by mondo
3317        # So that it can get back the built files
3318        if [ _"$MONDO_TMP" = _"" ]; then
3319            Die "MONDO_TMP is empty, aborting"
3320        fi
3321        if [ _"$MONDO_TMP" = _"/" ]; then
3322            Die "MONDO_TMP is /, aborting"
3323        fi
3324        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3325        rmdir $MINDI_TMP
3326        export MINDI_TMP=$MONDO_TMP
3327        mkdir -p $MINDI_TMP
3328
3329        # This is the scratch dir in mondo - subdir images
3330        MINDI_CACHE=$3
3331        LogFile "MINDI_CACHE = $MINDI_CACHE"
3332
3333        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3334        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3335       
3336###
3337### Sq-Modification...
3338### Attempt to locate kernel specific module path
3339### if module path is found then use it other wise use uname -r to set it...
3340###
3341        if [ $KERNEL_IS_XEN = "yes" ]; then
3342            LogAll "INFO: xenkernelpath = $xenkernelpath"
3343        fi
3344        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3345        if [ ! -d "/lib/modules/$kernelname" ]; then
3346           LogAll "WARNING: Module path for ${kernelpath} not found..."
3347           LogAll "         using running kernel\'s modules."
3348           kernelname=$KERVERRUN
3349        else
3350           LogAll "INFO: Using modules for kernel: ${kernelname}"
3351        fi
3352        LogAll "INFO: kernelname = $kernelname"
3353        LogAll "INFO: kernelpath = $kernelpath"
3354###
3355### end of Sq-Modification
3356###
3357        TAPEDEV=$5
3358        TAPESIZE=$6
3359        FILES_IN_FILELIST=$7
3360        USE_LZO=$8
3361        CDRECOVERY=$9
3362        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3363            IMAGE_DEVS=""
3364        else
3365            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3366        fi
3367        if [ "${11}" ] ; then
3368            LILO_OPTIONS=""
3369    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3370        fi
3371        LAST_FILELIST_NUMBER=${12}
3372        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3373        export MINDI_EXCLUDE_DEVS="${14}"
3374        USE_COMP="${15}"
3375        USE_LILO="${16}"
3376        USE_STAR="${17}"
3377        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3378        DIFFERENTIAL="${19}"
3379        USE_GZIP="${20}"
3380        USE_LZMA="${21}"
3381        NOT_BOOT="${22}"
3382        BOOT_TYPE="${23}"
3383        [ "$USE_COMP" = "" ] && USE_COMP=yes
3384        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3385        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3386        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3387        [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3388        # MONDO_ROOT is the real scratchdir
3389        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3390        if [ _"$MONDO_ROOT" != _"" ]; then
3391            mkdir -p $MONDO_ROOT
3392        else
3393            Die "MONDO_ROOT is undefined"
3394        fi
3395    else
3396        LogScreen "Syntax: mindi (--custom ....)"
3397        MindiExit -1
3398    fi
3399fi
3400
3401if [ _"$MINDI_CACHE" != _"" ]; then
3402    rm -rf $MINDI_CACHE/* 2> /dev/null
3403    mkdir -p $MINDI_CACHE
3404fi
3405
3406[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3407
3408if [ _"$MONDO_SHARE" = _"" ]; then
3409    LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3410    LogAll "Latest Mindi is available from http://www.mondorescue.org"
3411    LogAll "BusyBox sources are available from http://www.busybox.net"
3412    LogAll "------------------------------------------------------------------------------"
3413else
3414    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3415fi
3416if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3417    LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3418else
3419    LogAll "ERROR: Unable to find mindi-busybox, please install it"
3420    MindiExit -1
3421fi
3422
3423for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3424    modinfo $i 2> /dev/null 1> /dev/null
3425    if [ $? -eq 0 ]; then
3426        modprobe $i 2>&1 > /dev/null
3427    fi
3428done
3429
3430LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3431LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3432LogFile "NOT_BOOT = '$NOT_BOOT'"
3433if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3434    LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3435    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3436    MakeMountlist $MINDI_TMP/mountlist.txt
3437    CheckMountlist $MINDI_TMP/mountlist.txt
3438    mkdir -p $MINDI_TMP/small-all/tmp
3439    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3440    (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3441    sleep 2
3442    LogAll "Done. Exiting."
3443    MindiExit 0
3444fi
3445
3446if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3447    LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3448fi
3449
3450if [ "$kernelpath" = "" ] ; then
3451    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3452    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3453    read ch
3454    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3455        USE_OWN_KERNEL="yes"
3456    else
3457        USE_OWN_KERNEL="no"
3458    fi
3459    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3460        kernelpath=`TryToFindKernelPath`
3461        if [ "$kernelpath" = "" ] ; then
3462            echo -n "Please enter kernel path : "
3463            read kernelpath
3464        fi
3465    fi
3466fi
3467
3468echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3469[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3470
3471mountpoint=$MINDI_TMP/mountpoint.$$
3472PrepareDataDiskImages
3473
3474MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not create initrd.img"
3475
3476[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3477...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3478
3479if [ _"$MONDO_SHARE" = _"" ]; then
3480    OfferToMakeBootableISO
3481    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3482        OfferToMakeBootableUSB
3483    fi
3484    LogAll "INFO: Mindi Finished"
3485elif [ "$TAPEDEV" ] ; then
3486    if [ "$ARCH" != "ia64" ] ; then
3487        # We need to keep the img file as boot file for ia64 platform
3488        rm -f $MINDI_CACHE/{*img,*iso}
3489    else
3490        rm -f $MINDI_CACHE/*iso
3491    fi
3492    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3493        OfferToMakeBootableUSB
3494    fi
3495    OfferToMakeBootableISO
3496    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3497        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3498    else
3499        Die "Cannot find all.tar.gz, to be written to tape"
3500    fi
3501elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3502    OfferToMakeBootableUSB
3503else
3504    OfferToMakeBootableISO
3505fi
3506
3507if [ -f $MINDI_TMP/$MRCFG ]; then
3508    LogFile "INFO: Your $MRCFG file is:"
3509    LogFile "--------------------------"
3510    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3511    LogFile "--------------------------"
3512else
3513    if [ _"$MONDO_SHARE" != _"" ] ; then
3514        LogAll "ERROR: You don't have a $MRCFG file !"
3515    fi
3516fi
3517# cleanup
3518MindiExit 0
Note: See TracBrowser for help on using the repository browser.