source: branches/3.2/mindi/mindi @ 3569

Last change on this file since 3569 was 3569, checked in by Bruno Cornec, 4 years ago
  • Better log for keyboard detection
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 124.3 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3569 2016-04-25 18:03:36Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=150000      # increase if you run out of ramdisk space
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi_Image -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143fi
144
145# Function to log on screen only
146LogScreen() {
147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
152}
153
154# Function to log in log file only
155LogFile() {
156
157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160        rm -f "$2"
161    fi
162}
163
164# Function to log in both screen and logfile
165LogAll() {
166    LogScreen "$1"
167    LogFile "$1" "$2"
168}
169
170# Last function called before exiting
171# Parameter is exit code value
172# Should be declared here as used immediately below potentialy
173MindiExit() {
174    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
175    LogFile "INFO: End date : `date`" 
176    if [ _"$MONDO_SHARE" != _"" ] ; then
177        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
178        if [ -f $LOGFILE ]; then
179            cat $LOGFILE >> /var/log/mondoarchive.log
180        else
181            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
182        fi
183        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
184    fi
185
186    cd /
187    sync&
188
189    # Clean temporary files only when standalone mindi
190    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
191        rm -Rf $MINDI_TMP
192    fi
193    exit $1
194}
195
196Die() {
197    local i
198    if [ "$1" = "" ] ; then
199        LogAll "FATAL ERROR"
200    else
201        LogAll "FATAL ERROR. $1"
202    fi
203    if [ _"$2" != _"" ]; then
204        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
205    fi
206    rm -f "$2"
207
208    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
209    LogAll "See http://www.mondorescue.org for more information."
210    LogAll "WE CANNOT HELP unless you enclose that file.\n"
211    MindiExit -1
212}
213
214# Now we can create what we need
215MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
216if [ $? -ne 0 ]; then
217    df $TMPDIR
218    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
219fi
220if [ _"$MINDI_TMP" = _"" ]; then
221    Die "MINDI_TMP is empty, aborting"
222fi
223if [ _"$MINDI_TMP" = _"/" ]; then
224    Die "MINDI_TMP is /, aborting"
225fi
226export MINDI_TMP
227
228# ----------------------------------------------------------------------------
229
230
231AbortHere() {
232    [ "$mountpoint" ] && sync && umount $mountpoint 2>> $LOGFILE
233    Die "Program is terminating in response to signal received from OS/user"
234}
235
236
237Aborted() {
238    trap SIGHUP SIGTERM SIGTRAP SIGINT
239    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
240    Die "User abort."
241}
242
243
244AddFileToCfgIfExists() {
245    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
246}
247
248
249AddKeyboardMappingFile() {
250    local mappath r included_list included_item i res ii sss
251    mappath=$1
252    KBDEPTH=$(($KBDEPTH+1))
253    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
254    if [ -e "$bigdir/$mappath" ] ; then
255        LogFile "INFO: $mappath already added"
256        return
257    elif [ -d "$bigdir/$mappath" ] ; then
258        echo "Cannot add $mappath: it's a directory. Sorry."
259        return
260    fi
261    LogFile "INFO: Added kbd map $mappath"
262    if [ ! -e "$mappath" ] ; then
263        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
264        if [ ! -e "$mappath" ] ; then
265            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
266            return
267        fi
268    fi
269
270    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
271    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
272        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
273    else
274        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
275    fi
276    for included_item in $included_list ; do
277        if [ ! -e "$included_item" ] ; then
278            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
279            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
280            for ii in $sss ; do
281                [ -e "$ii" ] && AddKeyboardMappingFile $ii
282            done
283        else
284            AddKeyboardMappingFile $included_item
285        fi
286    done
287}
288
289
290CopyDependenciesToDirectory() {
291    local outdir incoming counter d found tdir templog
292    outdir=$1
293    templog=$MINDI_TMP/$$.log
294    mkdir -p $outdir
295    incoming=`ReadLine`
296    counter=$3
297    > $templog
298
299    while [ "$incoming" != "" ] ; do
300        if [ "$3" = "1" ]; then
301            counter=$(($counter+1))
302            LogProgress $counter $2
303        fi
304        # Non absolute file names should not arrive till here => skipped
305        if [ `echo "$incoming" | cut -c1` != '/' ]; then
306            LogAll "WARNING: Unable to handle $incoming"
307            incoming=`ReadLine`
308            continue
309        fi
310        # no parent directory of incoming should be a link, copy is not possible in that case
311        d=`dirname "$incoming"`
312        found="false"
313        while [ $d != "/" -a $found = "false" ]; do
314            [ -h "$d" ] && found="true"
315            d=`dirname "$d"`
316        done
317        if [ -d "$incoming" -a ! -h "$incoming" ]; then
318            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
319        elif [ -e "$incoming" ] && [ $found = "false" ]; then
320            if [ ! -h "$incoming" ]; then
321                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
322            else
323                tdir=`dirname "$incoming"`
324                if [ ! -e "$outdir/$tdir" ]; then
325                    mkdir -p "$outdir/$tdir"
326                fi
327                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
328            fi
329            # Only uncompress modules if not using udevd
330            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
331                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
332            fi
333            [ -x "$outdir" ] && StripExecutable $outdir
334        fi
335        incoming=`ReadLine`
336    done
337}
338
339
340CountItemsIn() {
341    local r
342    r=0
343    for q in $1 ; do
344        r=$(($r+1))
345    done
346    echo $r
347}
348
349
350DropOptimizedLibraries() {
351    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
352    filelist=$1
353    outdir=$2
354
355    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
356    if [ "$list_of_optimized_libraries" = "" ] ; then
357        return 0
358    fi
359    echo -en "Dropping i686-optimized libraries if appropriate"
360    for optimized_lib_name in $list_of_optimized_libraries ; do
361        echo -en "."
362        reason=""
363        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
364        echo "$vanilla_lib_name" >> $filelist
365        LogFile "INFO: Adding $vanilla_lib_name to filelist"
366        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
367        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
368
369        # This may return multiple files
370        for resolved in `mr-read-all-link $vanilla_lib_name`; do
371            LogFile "INFO: Adding as deps $resolved to filelist"
372            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
373            if [ "$vanilla_resolved_name" != "$resolved" ]; then
374                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
375                rmdir $outdir$resolved > /dev/null 2> /dev/null
376                ln -sf $vanilla_resolved_name $outdir$resolved
377                LogFile "INFO: Excluding deps $resolved" 
378                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
379                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
380                echo "$vanilla_resolved_name" >> $filelist.tmp
381                mv -f $filelist.tmp $filelist
382            fi
383        done
384    done
385    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
386    mv -f $filelist.tmp $filelist
387    echo -e "$DONE"
388}
389
390
391FindAndAddUserKeyboardMappingFile() {
392    local r res mapfile mappath included_item included_list keyfile mp locale
393    LogAll "INFO: Analyzing your keyboard's configuration."
394    KEYDIR=/usr/lib/kbd
395    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
396    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
397    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
398    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
399    if [ ! -e "$KEYDIR" ] ; then
400        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
401        return 0
402    else
403        LogFile "INFO: KEYDIR=$KEYDIR"
404    fi
405    if [ -e "/etc/sysconfig/keyboard" ] ; then
406        LogFile "INFO: Red Hat-style config detected."
407        keyfile=/etc/sysconfig/keyboard
408    elif [ -e "/etc/vconsole.conf" ] ; then
409        LogFile "INFO: New Fedora style config detected."
410        keyfile=/etc/vconsole.conf
411    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
412        LogFile "INFO: Slackware-style config detected."
413        keyfile=/etc/rc.d/rc.keymap
414    elif [ -e "/etc/rc.config" ] ; then
415        LogFile "INFO: Debian-style config detected."
416        keyfile=/etc/rc.config
417    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
418        LogFile "INFO: Debian-style config detected."
419        mkdir -p $bigdir/tmp
420        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
421        KBDEPTH=0
422        mkdir -p $bigdir/etc/console
423        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
424        echo ""
425        echo -e "$DONE"
426        return 0
427    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
428        LogFile "INFO: Ubuntu-style config detected."
429        mkdir -p $bigdir/tmp
430        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
431            kbdfile="/etc/console-setup/boottime.kmap.gz"
432        else
433            kbdfile="/etc/console-setup/cached.kmap.gz"
434        fi
435        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
436        KBDEPTH=0
437        mkdir -p $bigdir/etc/console-setup
438        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
439        echo ""
440        echo -e "$DONE"
441        return 0
442    elif [ -e "/etc/rc.conf" ] ; then
443        LogFile "INFO: ArchLinux config detected."
444        keyfile=/etc/rc.conf
445    elif [ -e "/etc/conf.d/keymaps" ] ; then
446        LogFile "INFO: Gentoo-style config detected."
447        keyfile=/etc/conf.d/keymaps
448    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
449        LogFile "INFO: X11-style config detected."
450        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
451    else
452        LogFile "Searching for rc.config ..."
453        keyfile=`find /etc -name rc.config | head -n1`
454        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
455            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
456            return
457        else
458            LogFile "INFO: Found $keyfile"
459        fi
460    fi
461    if [ ! -e "$KEYDIR/keymaps" ] ; then
462        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
463        return
464    fi
465    LogFile "INFO: keyfile=$keyfile"
466    # For SLES we need to remove the .map.gz extension Cf #614
467    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
468    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
469    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
470    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
471    LogFile "INFO: locale=$locale"
472    #
473    # Process the keymaps dir once for all
474    # AddKeyboardMappingFile will use it recursively
475    #
476    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
477    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
478    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
479    # If we have multiple keymaps then log it !!
480    echo "$mp" | grep -q " " >> $LOGFILE
481    if [ $? -eq 0 ]; then
482        LogAll "WARNING: Multiple keymaps found: $mp"
483        LogFile "INFO: The following one will be used"
484    fi
485    for i in $mp ; do
486        mappath=$i
487        [ -e "$i" ] && [ ! -d "$i" ] && break
488    done
489    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
490        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
491    fi
492    LogFile "INFO: mappath = $mappath"
493    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
494        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
495        return
496    fi
497    echo -en "INFO: Adding keyboard mapping tables"
498    mkdir -p $bigdir/tmp
499    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
500    KBDEPTH=0
501    AddKeyboardMappingFile $mappath
502    echo ""
503    echo -e "$DONE"
504    rm -f $MINDI_TMP/keymaps.find
505    return 0
506}
507
508
509FindLdlinux32Binary() {
510    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
511    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
512    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
513    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
514    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
515    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
517    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
518    if [ ! -e "$LDLINUXC32" ]; then 
519        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
520        LDLINUXC32=/tmp/idoesnthopefullyexist
521    else
522        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
523    fi
524}
525
526
527FindMboot32Binary() {
528    MBOOTC32=/usr/lib/syslinux/mboot.c32
529    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
530    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
531    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
532    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
533    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
536    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
537    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
538}
539
540FindLdlinuxe64Binary() {
541    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
542    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
543    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
544    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
545    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
546    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
548    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
549    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
550}
551
552FindSyslinux64EFI() {
553    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
554    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
555    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
556    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
557    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
558    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
560    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
561    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
562}
563
564FindIsolinuxBinary() {
565    ISOLINUX=/usr/lib/isolinux.bin
566    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
567    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
568    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
569    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
570    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
573    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
574    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
575}
576
577
578GenerateGiantDependencyList() {
579    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
580
581    echo -en "INFO: Analyzing dependency requirements"
582    outfile=$1
583    tempfile=$MINDI_TMP/$$.txt
584    incoming=`ReadLine`
585
586    > $tempfile
587    progress=0
588    res=0
589    noof_lines=$2
590    while [ "$incoming" != "" ] ; do
591        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
592            incoming=`ReadLine`
593            continue
594        fi
595        if [ "$incoming" = "LVMFILES:" ] ; then
596            break
597        fi
598        filelist=`GenerateListForFile "$incoming"`
599        r=$?
600        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
601        res=$(($res+$r))
602#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
603        for fname in $filelist ; do
604            [ "$fname" != "" ] && echo "$fname" >> $tempfile
605        done
606        progress=$(($progress+1))
607        LogProgress $progress $noof_lines
608        incoming=`ReadLine`
609    done
610    if  [ "$incoming" = "LVMFILES:" ] ; then
611        incoming=`ReadLine`
612        lvmversion=""
613        while [ "$incoming" != "" ] ; do
614            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
615                incoming=`ReadLine`
616                continue
617            fi
618            filelist=`GenerateListForFile "$incoming"`
619            for tool in $filelist ; do
620                lvmresolved=`readlink -f $tool`
621                if [ "$tool" = "$lvmresolved" ]; then
622                    echo "$tool" >> $tempfile
623                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
624                    if [ "$lvmversion" = "" ] ; then
625                        lvmversion=`$lvmresolved`
626                        echo "$lvmresolved" >> $tempfile
627                    fi
628                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
629                    if [ "$lvmversion" = "200" ]; then
630                        # pvdata and lvmcreate_initrd don't exist in LVM2
631                        case "$toolstripped" in
632                        "pvdata")
633                            continue
634                            ;;
635                        "lvmcreate_initrd")
636                            continue
637                            ;;
638                        esac
639                    fi
640                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
641                    if [ -e "$toolpath" ] ; then
642                        echo "$toolpath" >> $tempfile
643                        echo "$tool" >> $tempfile
644                    else
645                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
646                    fi
647                    if [ -e "$toolpath" ] ; then
648                        echo "$toolpath" >> $tempfile
649                        echo "$tool" >> $tempfile
650                    else
651                        echo "Where are your LVM-Tools? Couldn't find $tool"
652                    fi
653                else
654                    echo "$tool" >> $tempfile
655                fi
656            done
657            progress=$(($progress+1))
658            LogProgress $progress $noof_lines
659            incoming=`ReadLine`
660        done
661    fi
662    echo -en "$DONE\nINFO: Making complete dependency list"
663
664    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
665    mv -f $tempfile.new $tempfile
666    > $outfile.pre
667    progress=0
668    noof_lines=`cat $tempfile | wc -l`
669    LogFile "---------------------------------"
670    LogFile "List of dependencies:             "
671    LogFile "---------------------------------"
672    for fname in `cat $tempfile` ; do
673        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
674        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
675        progress=$(($progress+1))
676        LogProgress $progress $noof_lines
677    done
678    if [ _"$MONDO_SHARE" != _"" ]; then
679        mkdir -p $bigdir/tmp
680        mkdir -p $bigdir/usr/bin
681        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
682            LogAll "\nINFO: Incorporating post-nuke tarball"
683            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
684        fi
685        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
686            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
687        else
688            LogAll "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
689            LogAll "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
690            LogAll "       If Mindi was called by Mondo then send a bug report."
691            LogAll "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
692            LogAll "       Finally, run Mindi again."
693            Die "Odd."
694        fi
695        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogAll "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
696        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
697            LogAll "\nINFO: Incorporating Network-related settings"
698            for r in NETFS-* ; do
699                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
700                LogFile "INFO: Copying $r to ramdisk"
701            done
702        fi
703    fi
704    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
705    rm -f $tempfile $outfile.pre
706    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
707    return $res
708}
709
710
711GenerateListForFile() {
712    local files_found loc fname incoming i res
713    incoming="$1"
714    files_found=""
715    res=0
716
717    for fname in $incoming ; do
718        files_found="$files_found `LocateFile $fname`"
719    done
720
721    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
722}
723
724
725# Returns all disk devices which are part of a raid array
726GetAllRaidMembers() {
727    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
728}
729
730
731GetFileSizeList() {
732    local i
733    for i in `find $1 -type d -o -print` ; do
734        du -sk $i
735    done
736}
737
738
739# Check kernel filesystem capabilites for accessing initrd image
740# Could be ext2 FS (old mode) or initramfs (new mode)
741#
742# Interface definition:
743# param #1: absolute path to kernel image
744GetInitrdFilesystemToUse() {
745
746    # interface test: make sure we have one parameter
747    if [ $# -ne 1 ]; then
748        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
749    fi
750
751    # interface parameters
752    local lvKernelImage=$1
753
754    # local constants (filesystem magic strings)
755    local lcMagicCramfs="<3>cramfs: wrong magic"
756    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
757    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
758    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
759
760    # local variables
761    local lvOffset
762    local lvScanRes
763    local lvUseFilesystem
764
765    # say where we are.
766    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
767
768    # verify that file exists
769    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
770
771    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
772    file $lvKernelImage 2>&1 | grep -q gzip
773    if [ $? -eq 0 ]; then
774        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
775        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
776    else
777        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
778        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
779        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
780        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
781        if [ $lvOffset -eq 0 ]; then
782            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
783            lvScanRes=$lcMagicInitfs
784        else
785            lvOffset=`expr $lvOffset / 2`
786            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
787            # scan again  kernel image
788            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
789        fi
790    fi
791
792    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
793    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
794        lvUseFilesystem="ext2fs"
795    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
796        lvUseFilesystem="ext3fs"
797    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
798        lvUseFilesystem="initramfs"
799    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
800        lvUseFilesystem="cramfs"
801    else
802        # In that case, we are most probably after 2.6.30 and use the supported initramfs
803        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
804        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
805        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
806        lvUseFilesystem="initramfs"
807    fi
808
809    # say what we are using
810    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
811
812    # return file system to use
813    echo "$lvUseFilesystem"
814
815}
816
817# Searches members of raid device
818# $1: raid device (/dev/md...)
819GetRaidDevMembers() {
820    if [ ! -f /etc/raidtab ]; then 
821        return
822    fi
823    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
824}
825
826
827ListAllPartitions() {
828    local res currline partition all_partitions ap_orig remaining i j
829
830    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
831    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
832    if [ -e "/vmfs/volumes" ]; then
833        # For VMWare ESX 3 get the device names of these volumes
834        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
835    fi
836    return
837}
838
839
840ListKernelModulePaths() {
841    local module_list module fname r kern
842    module_list="$MODULES"
843    # Remove unwanted modules from list
844    for i in $DENY_MODS; do
845        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
846    done
847###
848### Sq-Modification ... Use kernelname for module search path if specified
849###
850    if [ "${kernelname}" != "" ]
851    then
852        kern=${kernelname}
853    else
854        kern="$KERVERRUN"
855    fi
856    export KERVER=$kern
857###
858### Sq-Mod End
859###
860    # Get rid of duplicates
861    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
862        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
863        if [ -z "$r" ]; then
864            if [ "`echo "$MODULES" | grep -w $module`" ]; then
865                r="[live module file not found]"
866            else
867                r="[extra module file not found]"
868            fi
869        else
870            [ -f "$r" ] && echo "$r"
871        fi
872        LogFile "INFO: module $module --> $r"
873    done
874    find /lib/modules/$kern/modules.* -type f 2> /dev/null
875}
876
877#
878# Critical function which computes all dependencies (dyn. lib.)
879# for a list of binaries
880#
881LocateDeps() {
882    local incoming fname deps
883    incoming="$*"
884    deps=""
885
886    for fname in $incoming ; do
887        if [ ! -e "$fname" ] ; then
888            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
889            if echo $fname | grep lvm &> /dev/null ; then
890                LogFile "          This warning only affects you if you are using LVM."
891                if echo "$MODULES" | grep lvm &> /dev/null ; then
892                    LogFile "          I think you are, so please take heed!"
893                else
894                    LogFile "          I don't think you are, so don't worry about it."
895                fi
896            fi
897        else
898            deps="$deps $fname" 
899        fi
900    done
901    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
902}
903
904
905LocateFile() {
906    local i j path fname_to_find location output resolved tmp stub cache_id loclist
907    fname_to_find="$1"
908    # It's an absolute path
909    j=`echo "$fname_to_find" | cut -c1`
910    if [ _"$j" = _"/" ]; then
911        dn=`dirname $fname_to_find`
912        # We suppose that the link is already included, just add the new file
913        if [ -h "$dn" ]; then
914            newdn=`readlink -f $dn`
915            bn=`basename $fname_to_find`
916            output="$newdn/$bn"
917        else
918            output="$fname_to_find"
919        fi
920        if [ -h "$output" ] ; then
921            output="`mr-read-all-link $output` $output"
922        fi
923        echo "$output"
924        return 0
925    fi
926    # It's not an absolute path
927    output=""
928    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
929    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
930        [ -h "$path" ] && continue
931        [ ! -e "$path/$fname_to_find" ] && continue
932        output="$path/$fname_to_find $output"
933        if [ -h "$path/$fname_to_find" ] ; then
934            output="`mr-read-all-link $path/$fname_to_find` $output"
935        fi
936    done
937    if [ "$output" = "" ] ; then
938        return 1
939    fi
940    echo "$output"
941    return 0
942}
943
944LogProgress() {
945    local i progress modres noof_lines title
946 
947    progress=$1
948    noof_lines=$2
949    title=$3
950
951    i=$(($progress*100))
952    if [ $noof_lines -ne 0 ]; then
953        i=$(($i/$noof_lines))
954    else
955        i=0
956    fi
957
958    if [ _"$MONDO_SHARE" != _"" ]; then 
959        echo "$title        $i%"
960    else
961        echo -en "\r\t\t\t\t\t\t\t\t"
962        echo -en "$i"
963        echo -en "%"
964        modres=$(($progress%4))
965        [ "$modres" -eq "0" ] && echo -en "\t/"
966        [ "$modres" -eq "1" ] && echo -en "\t-"
967        [ "$modres" -eq "2" ] && echo -en "\t\\"
968        [ "$modres" -eq "3" ] && echo -en "\t|"
969    fi
970}
971
972# Called by MakeBootInitFile, to make /tmp/$MRCFG
973MakeMondoConfigFile() {
974    local outfile use_lzo use_comp use_star
975    outfile=$1
976    > $outfile
977    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
978    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
979    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
980    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
981    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
982    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
983    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
984    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
985    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
986    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
987    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
988    echo "use-lzo $use_lzo" >> $outfile
989    echo "use-gzip $use_gzip" >> $outfile
990    echo "use-star $use_star" >> $outfile
991    echo "use-lzma $use_lzma" >> $outfile
992    echo "use-comp $use_comp" >> $outfile
993    echo "boot-type $BOOT_TYPE" >> $outfile
994    echo "datestamp `date`" >> $outfile
995    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
996    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
997    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
998    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1009
1010    # Deal with network configuration in a portable way
1011    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1012        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1013    fi
1014}
1015
1016# Get PV's for an LV
1017GetPVsForLV() {
1018    if [ -n "$1" ]; then
1019        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1020        if [ -z "$vg" ]; then
1021            return
1022        fi
1023        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1024    fi
1025}
1026
1027
1028MakeMountlist() {
1029    local mountlist all_partitions current_partition \
1030partition_size partition_format outstring partition_number \
1031partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1032absolute_partition old_partition_fmt current_lvolume uname skip
1033
1034    LogFile "------------------------------------"
1035    LogFile "INFO: Your raw fstab file looks like this:"
1036    LogFile "------------------------------------"
1037    cat $MY_FSTAB >> $LOGFILE
1038    LogAll "-----------------------------------"
1039    LogAll "INFO: Your mountlist will look like this:"
1040    LogAll "-----------------------------------"
1041
1042# mountlist(OUT)
1043    mountlist=$1
1044
1045# NB: partition = device
1046# NB: mountpt = where the device is mounted
1047
1048    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1049
1050    [ "$mountlist" != "" ] && [ "$mountlist" != "/" ] && rm -Rf $mountlist
1051    > $mountlist
1052    all_partitions=""
1053   
1054    if [ $LVM != "false" ]; then
1055        LogFile "INFO: Analyzing LVM..."
1056        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1057        if [ $? -ne 0 ]; then
1058            LVM="false"
1059        fi
1060        # Excluded LVs and GVs are not reported here
1061        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1062    fi
1063    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1064    for i in $IMAGE_DEVS ; do
1065        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1066    done
1067    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1068    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1069    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1070    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1071    for c_p in $all_partitions ; do
1072        # Skip fd/cd devices, network FS, cifs
1073        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1074        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1075        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1076            current_partition=`readlink -f $c_p`
1077            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1078                current_partition="$c_p"
1079            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1080                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1081                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1082            fi
1083            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1084        else
1085            current_partition="$c_p"
1086        fi
1087        [ "$c_p" = "none" ] && continue
1088        redhat_label=""
1089        label=""
1090        uuid=""
1091        absolute_partition=`readlink -f $c_p`
1092        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1093
1094        # set default in case we dont't find it
1095        str_to_find_fmt_with=$current_partition
1096
1097        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1098        # current_partition contains only first column of /etc/fstab
1099        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1100            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1101            actual_dev=""
1102
1103            # 1st try, findfs - the RHEL way of finding labels and their partitions
1104            if [ -x "/sbin/findfs" ]; then
1105                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1106            fi
1107   
1108            # 2nd try : blkid, the good way for all LABEL except swap
1109            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1110                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1111                # For LVM FS it will give a /dev/dm-# which should then be converted
1112                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1113                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1114                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1115                    for dev in `ls /dev/mapper/*`; do
1116                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1117                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1118                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1119                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1120                            break
1121                        fi
1122                    done
1123                fi
1124            fi
1125   
1126            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1127            # For LVM gives a /dev/mapper entry
1128            if [ "x$actual_dev" = "x" ]; then
1129                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1130            fi
1131   
1132            # 4th try, with vol_id
1133            # SWAP only
1134            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1135                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1136                for dev_swap in $list_swaps ; do
1137                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1138                    if [ "x$dev_exists" != "x" ]; then
1139                        actual_dev=$dev_swap
1140                        break;
1141                    fi
1142                done
1143            fi
1144
1145            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1146            # LABEL=SW-cciss/c0d0p3 (RDP)
1147            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1148            # SWAP only
1149            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1150                    skip=""
1151                    uname=$KERVERRUN
1152                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1153                    # 2.6.12 needs 16 (FC3)
1154                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1155                    # 2.6.19 and upper needs 1052
1156                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1157                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1158                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1159                    if [ $skip = "" ]; then
1160                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1161                    fi
1162                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1163                    do
1164                        # Location of the swap label for kernel 2.6
1165                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1166                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1167                            actual_dev=$try_dev
1168                        fi
1169                    done
1170            fi
1171
1172            # Check if one of all those tries has known success
1173            if [ "x$actual_dev" != "x" ]; then
1174                current_partition=$actual_dev
1175            else
1176                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1177            fi
1178        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1179        # current_partition contains only first column of /etc/fstab
1180        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1181            uuid=`echo "$current_partition" | cut -d'=' -f2`
1182            actual_dev=""
1183
1184            # 1st try, findfs - the RHEL way of finding labels and their partitions
1185            if [ -x "/sbin/findfs" ]; then
1186                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1187            fi
1188   
1189            # 2nd try : blkid, the good way for all UUID except swap
1190            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1191                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1192                # For LVM FS it will give a /dev/dm-# which should then be converted
1193                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1194                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1195                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1196                    for dev in `ls /dev/mapper/*`; do
1197                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1198                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1199                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1200                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1201                            break
1202                        fi
1203                    done
1204                fi
1205            fi
1206   
1207            # 3th try, with vol_id
1208            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1209                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1210                for dev in $list_dev ; do
1211                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1212                    if [ "x$dev_exists" != "x" ]; then
1213                        actual_dev=$dev
1214                        break;
1215                    fi
1216                done
1217            fi
1218
1219            # 4th try, with dumpuuid (VMWare only ?) for swap
1220            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1221                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1222                for dev in $list_dev ; do
1223                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1224                    if [ "x$dev_exists" != "x" ]; then
1225                        actual_dev=$dev
1226                        break;
1227                    fi
1228                done
1229            fi
1230
1231            # Check if one of all those tries has known success
1232            if [ "x$actual_dev" != "x" ]; then
1233                current_partition=$actual_dev
1234            else
1235                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1236            fi
1237        else
1238            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1239            # they use symlinks in fstab unrelated to what is shown in mount !
1240            if [ _"$partition_mountpt" = _"" ]; then
1241                # set default in case we dont't find it
1242                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1243                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1244                            str_to_find_fmt_with=$tmpp
1245                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1246                            break;
1247                        fi
1248                done
1249            fi
1250        fi
1251
1252        # Detects noauto partitions not mounted and exclude them
1253        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1254        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1255                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1256            continue
1257        fi
1258        # Detects bind partitions and exclude them
1259        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1260                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1261            continue
1262        fi
1263
1264        # Look for devices which have to be excluded
1265        skip=0
1266        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1267            l=""
1268            list_of_devices="`mr-read-all-link $current_partition`"
1269            for d in $list_of_devices; do
1270                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1271            done
1272
1273            # Remove PVs from LVs excluded
1274            l="$l `GetPVsForLV $current_partition`"
1275
1276            # We want a single unique list
1277            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1278
1279            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1280                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1281                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1282                    skip=1
1283                    continue
1284                fi
1285            done
1286        fi
1287        if [ $skip -eq 1 ]; then
1288            continue
1289        fi
1290
1291        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1292        # Detects iso9660 ISO images and exclude them
1293        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1294                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1295            continue
1296        fi
1297        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1298        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1299        # the former is then a link to the latter, so we test whether
1300        # $current_partition is actually such a link or not and set
1301        # $current_lvolume accordingly. On Debian you may find more than one answer
1302        # so we remove the one corresponding to /dev/.static
1303        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1304        # principle is the same and we need to find the link to it as well.
1305        # Note that $current_lvolume may well be an
1306        # ordinary device. It is just to make sure that we feed the right value
1307        # into any of the LVM tools if possible.
1308
1309        current_lvolume="$current_partition"
1310        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1311            # .static dir are a Debian specificity
1312            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1313            echo $current_lvolume | grep -q ' '
1314            if [ $? -eq 0 ]; then
1315                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1316            fi
1317            # if it's not found, it may well be a real device such as a multipath one
1318            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1319            if [ _"$current_lvolume" = _"" ]; then
1320                current_lvolume="$current_partition"
1321            fi
1322        fi
1323        #
1324        # End of LVM device style variation code (other than $current_lvolume).
1325
1326        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1327            # Size computed via LVM not directly
1328            partition_size="lvm"
1329        else
1330            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1331            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1332            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1333                # Skip swap files
1334                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1335                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1336                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1337                [ "$partition_format" != "swap" ] && partition_format="swap"
1338                if [ "$partition_size" = "" ] ; then
1339                    totalsize=0
1340                    items=0
1341                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1342                        totalsize=$(($totalsize+$i))
1343                        items=$(($items+1))
1344                    done
1345                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1346                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1347                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1348                fi
1349            else
1350                partition_size=`SizeOfPartition $current_partition`
1351            fi
1352        fi
1353        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1354        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1355        if [ "$partition_mountpt" = "" ] ; then
1356            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1357                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1358                    partition_mountpt="raid"
1359                    partition_format="raid"
1360                else
1361                    partition_mountpt="lvm"
1362                    partition_format="lvm"
1363                fi
1364            fi
1365        fi
1366        psz=$partition_size
1367        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1368        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1369        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1370            partition_mountpt="image"
1371            old_partition_fmt=$partition_format
1372            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1373            partition_size=$(($partition_size+1)); # just in case
1374            if [ "$partition_format" = "Linux" ] ; then
1375                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1376                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1377                partition_format=$old_partition_fmt
1378            fi
1379        fi
1380
1381        if [ ! "$partition_mountpt" ] ; then
1382            LogFile "------- $FDISK -l $qq log ------------"
1383            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1384                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1385                [ "$partition_format" ] && break
1386            done
1387            LogFile "------- $FDISK log end ------------"
1388            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1389                partition_format="compaq"
1390            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1391                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1392                continue
1393            fi
1394        fi
1395        if [ "$redhat_label" ]; then
1396            label="$redhat_label"
1397        elif [ "$uuid" ]; then
1398            label="$uuid"
1399        fi
1400
1401        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1402        # in order to mount the root part e.g. in grub.
1403        # One way to solve this is to add the UUID now, if there wasn't one so it's
1404        # restored correctly
1405        if [ _"$label" = _"" ]; then
1406            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1407        fi
1408
1409        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1410        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1411        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1412        if [ "$current_partition" = "" ] ; then
1413            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1414        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1415            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1416                partition_mountpt=raid
1417                partition_format=raid
1418                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1419                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1420            else
1421                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1422            fi
1423        elif [ "$partition_format" = "" ] ; then
1424            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1425        elif [ "$partition_size" = "" ] ; then
1426            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1427        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1428            continue
1429        else
1430            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1431            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1432                partition_format="vfat"
1433            fi
1434            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1435            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1436        fi
1437    done
1438    LogAll "-----------------------------------" 
1439}
1440
1441CheckMountlist() {
1442    local file=$1
1443    # Coherency verification
1444    ML01=`cat $file | wc -l`
1445    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1446    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1447    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1448    if [ "$ML01" -ne "$ML1" ]; then
1449        LogFile "--------------------------------------------"
1450        LogAll "WARNING: Duplicate device entry in mountlist"
1451        LogFile "--------------------------------------------"
1452    fi
1453    if [ "$ML02" -ne "$ML2" ]; then
1454        LogFile "--------------------------------------------"
1455        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1456        LogFile "------------------------------------------------"
1457    fi
1458}
1459
1460
1461MakeISOErrors() {
1462
1463LogFile "----------- $ISO_CMD's errors --------------"
1464LogAll "$ISO_CMD returned the following errors:"
1465cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1466LogAll "ERROR: Failed to create ISO image."
1467}
1468
1469MakeISO() {
1470
1471LogAll "INFO: Invoking $CMD ."
1472(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1473if [ $? -ne 0 ] ; then
1474    if [ "$BOOT_TYPE" = "UEFI" ]; then
1475        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1476        LogAll "INFO: Invoking instead $CMD"
1477        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1478        if [ $? -eq 0 ] ; then
1479            LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1480        else
1481            MakeISOErrors
1482        fi
1483    else
1484        MakeISOErrors
1485    fi
1486else
1487    LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1488fi
1489rm -f $MINDI_TMP/mkisofs.log
1490}
1491
1492MakeBootableDevice() {
1493
1494local target tbc retval part size mount_opt
1495
1496target="$1"
1497
1498rm -Rf $MINDI_TMP/target
1499mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1500
1501LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1502cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1503for i in memdisk memtest.bin memtest.img ; do
1504    j=$MINDI_LIB/$i
1505    k=$MINDI_TMP/target
1506    if [ -e "$j" ] ; then
1507        LogAll "INFO: Copying $j to $k"
1508        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1509        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1510        if [ _"$MONDO_SHARE" != _"" ]; then 
1511            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1512        fi
1513    fi
1514done
1515
1516retval=0
1517LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1518cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1519if [ $? -ne 0 ] ; then
1520    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1521    retval=$(($retval+1))
1522fi
1523LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1524cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1525if [ $? -ne 0 ] ; then
1526    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1527    retval=$(($retval+1))
1528fi
1529
1530# copy boot stuff now generated in PrepareDataDiskImage
1531if [ "$BOOT_TYPE" = "UEFI" ]; then
1532    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1533    tbc="EFI"
1534    # Also prepare a BIOS compatible boot
1535    if  [ "$target" = "ISO" ]; then
1536        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1537    fi
1538else
1539    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1540    tbc="syslinux"
1541    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1542        LogFile "----------- syslinux's conf --------------"
1543        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1544        LogFile "------------------------------------------"
1545    fi
1546    if  [ "$target" = "ISO" ]; then
1547        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1548        if [ $? -ne 0 ] ; then
1549            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1550            retval=$(($retval+1))
1551        fi
1552    fi
1553fi
1554
1555if [ "$ARCH" != "ia64" ] ; then
1556    if [ $KERNEL_IS_XEN = "yes" ]; then
1557        FindMboot32Binary
1558        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1559        if [ $? -ne 0 ] ; then
1560            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1561            retval=$(($retval+1))
1562        fi
1563        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1564        if [ $? -ne 0 ] ; then
1565            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1566            retval=$(($retval+1))
1567        fi
1568    fi
1569fi
1570
1571MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1572
1573if [ _"$MONDO_SHARE" != _"" ]; then 
1574    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1575    if [ $? -ne 0 ] ; then
1576        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1577        LogAll "       Please check the target directory."
1578        retval=$(($retval+1))
1579    fi
1580    if [ $KERNEL_IS_XEN = "yes" ]; then
1581        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1582        if [ $? -ne 0 ] ; then
1583            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1584            LogAll "       Please check the target directory."
1585            retval=$(($retval+1))
1586        fi
1587    fi
1588    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1589    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1590    if [ $? -ne 0 ] ; then
1591        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1592        LogAll "       Please check the target directory."
1593        retval=$(($retval+1))
1594    fi
1595    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1596    if [ $? -ne 0 ] ; then
1597        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1598        LogAll "       Please check the target directory."
1599        retval=$(($retval+1))
1600    fi
1601fi
1602
1603if [ -f "$MINDI_TMP/$MRCFG" ]; then
1604    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1605fi
1606
1607LogFile "----------- target dir content -----------"
1608LogFile "------------------------------------------"
1609ls -lR $MINDI_TMP/target >> $LOGFILE
1610LogFile "------------------------------------------"
1611LogFile "----------- target dir sizes -------------"
1612du -sk $MINDI_TMP/target/* >> $LOGFILE
1613LogFile "------------------------------------------"
1614
1615if [ "$retval" -ne "0" ] ; then
1616    LogFile "--------------------------------"
1617    LogFile "INFO: Size of $MINDI_TMP/target:"
1618    du -sk $MINDI_TMP/target/* >> $LOGFILE
1619    LogFile "--------------------------------"
1620    echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1621    sync
1622    umount $MINDI_TMP/target
1623    LogAll "ERROR: Problems while creating boot media."
1624    LogAll "       Please unload some of your modules and try again."
1625    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1626fi
1627
1628mkdir -p $MINDI_TMP/mpt
1629
1630if  [ "$target" = "USB" ]; then
1631    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1632    LogAll "INFO: Checking $USBDEVICE"
1633    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1634    if [ $? -ne 0 ]; then
1635        LogAll "ERROR: Unable to access $USBDEVICE"
1636        LogAll "       Make sure your USB device is plugged in"
1637        MindiExit -1
1638    fi
1639    # Some distro do auto mount at that point (Ubuntu)
1640    LogAll "INFO: Unmounting $USBPART just in case"
1641    sync
1642    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1643    if [ "$BOOT_TYPE" = "BIOS" ]; then
1644        # If your key has no MBR it may cause an issue
1645        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1646        if [ -r $MBRFILE ]; then
1647            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1648            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1649        else
1650            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1651            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1652        fi
1653    fi
1654    LogAll "INFO: Preparing $USBDEVICE"
1655    cat > $MINDI_TMP/fdisk.txt << EOF
1656d
1657d
1658d
1659d
1660n
1661p
16621
1663
1664
1665t
1666b
1667a
16681
1669w
1670EOF
1671    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1672    if [ $? -ne 0 ]; then
1673        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1674        LogAll "       Make sure your USB device is plugged in"
1675        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1676        MindiExit -1
1677    fi
1678    LogFile "fdisk build file"
1679    LogFile "----------------"
1680    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1681    LogFile "----------------"
1682    rm -f $MINDI_TMP/fdisk.txt
1683    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1684    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1685    # Calling kpartx in case devices were not created
1686    if [ -x "/sbin/kpartx" ]; then
1687        /sbin/kpartx -a $USBDEVICE
1688    fi
1689    # Some distro do auto mount at that point (Ubuntu)
1690    LogAll "INFO: Unmounting $USBPART just in case again"
1691    sync
1692    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1693    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1694    if [ "`which dmsetup`" != "" ]; then
1695        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1696        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1697            LogAll "INFO: Removing $block_id from device mapper."
1698            sleep 1
1699            dmsetup remove $block_id
1700        fi
1701    fi
1702    part=$USBPART
1703    mount_opt=""
1704else
1705    # ISO image
1706    part=$MINDI_TMP/mindi-bootroot.img
1707    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1708    # Adds 10 MB to allow for additional space
1709    size=$(($size+10000))
1710    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1711    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1712    mount_opt="-o loop"
1713fi
1714
1715LogAll "INFO: Creating a vfat filesystem on $part"
1716
1717mkfs.vfat $part 2>&1 >> $LOGFILE
1718if [ $? -ne 0 ]; then
1719    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1720    if  [ "$target" = "USB" ]; then
1721        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1722        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1723    fi
1724    MindiExit -1
1725fi
1726if  [ "$target" = "ISO" ]; then
1727    if [ "$BOOT_TYPE" = "BIOS" ]; then
1728        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1729        # and run after the formating for versions > 6 it seems
1730        syslinux $part >> $LOGFILE 2>> $LOGFILE
1731    fi
1732fi
1733LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1734mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1735if [ $? -ne 0 ]; then
1736    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1737    if  [ "$target" = "USB" ]; then
1738        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1739        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1740    fi
1741    MindiExit -1
1742fi
1743
1744LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1745mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1746if [ $? -ne 0 ] ; then
1747    LogFile "--------------------------------"
1748    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1749    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1750    LogFile "--------------------------------"
1751    sync
1752    umount $MINDI_TMP/mpt
1753    LogAll "ERROR: Problems while creating boot media."
1754    LogAll "       Please unload some of your modules and try again."
1755    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1756fi
1757
1758if  [ "$target" = "ISO" ]; then
1759    if [ "$ARCH" != "ia64" ]; then
1760        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1761    fi
1762    # ISO
1763    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1764        CMD="$ISO_CMD $ISO_OPT"
1765        MakeISO
1766    else
1767        if [ "$ARCH" = "ia64" ]; then
1768            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1769        else
1770            # UEFI
1771            echo "$CMD" | grep -q "xorriso"
1772            if [ $? -eq 0 ]; then
1773                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
1774            else
1775                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1776            fi
1777        fi
1778    fi
1779fi
1780
1781# Avoids graphical tool to keep the FS mounted
1782sync
1783umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1784
1785if  [ "$target" = "ISO" ]; then
1786    cp $part $MINDI_CACHE
1787    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
1788        # We just need the EFI dir and the boot image for this case
1789        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1790        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1791        # We need again the kernel+initrd at the root for UEFI boot at least
1792        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1793        # We need the boot image now and what mindi needs at restore time as well
1794        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1795        # Avoids graphical tool to keep the FS mounted
1796        sync
1797        umount $MINDI_TMP/mpt2
1798        LogFile "----------- target dir content -----------"
1799        LogFile "------------------------------------------"
1800        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1801        LogFile "------------------------------------------"
1802        MakeISO
1803    fi
1804else
1805    # USB
1806    if [ "$ARCH" != "ia64" ] ; then
1807        syslinux -v 2>&1 | grep -q 4.02
1808        if [ $? -eq 0 ]; then
1809            # This buggy version of syslinux requires a call to --stupid and not -s
1810            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1811            res=$?
1812        else
1813            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1814            res=$?
1815        fi
1816        if [ $res -ne 0 ] ; then
1817            LogAll "----------- syslinux's errors --------------"
1818            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1819            LogAll "------------------------------------------"
1820            LogAll "ERROR: Failed to create USB image."
1821        else
1822            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1823        fi
1824        rm -f $MINDI_TMP/syslinux.log
1825    else
1826        LogAll "ERROR: No USB boot support for ia64"
1827        MindiExit -1
1828    fi
1829fi
1830}
1831
1832
1833OfferToMakeBootableUSB() {
1834
1835local i files
1836
1837if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1838    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1839    read i
1840    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1841    if [ "$USBDEVICE" = "" ]; then
1842        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1843        read dev
1844        USBDEVICE=$dev
1845    fi
1846    echo "WARNING: This will erase all content on $USBDEVICE"
1847    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1848    read i
1849    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1850else
1851    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1852        Die "No USBDEVICE environment variable declared, aborting"
1853    fi
1854fi
1855USBPART="${USBDEVICE}1"
1856
1857MakeBootableDevice USB
1858}
1859
1860
1861OfferToMakeBootableISO() {
1862
1863local i files
1864
1865if [ -z "$ISO_CMD" ]; then
1866    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1867    return
1868fi
1869
1870if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1871    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1872    read i
1873    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1874fi
1875
1876MakeBootableDevice ISO
1877
1878}
1879
1880
1881MakeMessageFile() {
1882   
1883    if [ -x "/bin/lsb_release" ]; then
1884        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1885    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1886        DESC="Arch Linux"
1887        if [ -r /var/log/pacman.log ]; then
1888            # there are no releases but we can get the last system upgrade
1889            # Output example:   Arch Linux [2011-03-03 01:39]
1890            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1891        fi
1892    elif [ -x "/etc/os-release" ]; then
1893        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1894    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1895        # For pb >= 0.9.8
1896        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1897    elif [ -r /etc/issue.net ]; then
1898        DESC=`head -1 /etc/issue.net`
1899    elif [ -r /etc/issue ]; then
1900        DESC=`head -1 /etc/issue`
1901    else
1902        DESC="Unknown desc"
1903    fi
1904    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1905    if [ _"$MONDO_SHARE" != _"" ]; then
1906        if [ "$CDRECOVERY" != "yes" ] ; then
1907            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1908                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1909                echo -en "$BOOT_MEDIA_MESSAGE"
1910            elif [ ! "$MINDI_TMP" ] ; then
1911                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1912                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1913                    echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1914                fi
1915            else
1916                echo -en "$BOOT_MEDIA_MESSAGE"
1917            fi
1918        else
1919            echo -en "\
1920To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1921CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1922        fi
1923    fi
1924
1925    # Also create the other help screens
1926    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1927    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1928    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1929}
1930
1931
1932MakeBootConfFile() {
1933    local options i ooo
1934    options=""
1935    # Type of boot file (elilo or syslinux/isolinux)
1936    type=$1
1937    if [ "$type" = "elilo" ]; then
1938        sep="="
1939        sepdef="="
1940    else
1941        sep=" "
1942        sepdef=" "
1943        if [ "$type" = "grub" ]; then
1944            sepdef="="
1945        fi
1946    fi
1947
1948    # Generic header for conf file
1949    if [ "$type" = "elilo" ]; then
1950        echo -en "prompt\n"
1951    elif [ "$type" = "grub" ]; then
1952        echo -en "pause Press a key when ready to restore\n"
1953    elif [ "$type" = "grub2" ]; then
1954        echo -en "set "
1955    else
1956        # syslinux family
1957        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1958    fi
1959
1960    # Compute which default option to boot from
1961    echo -en "default${sepdef}"
1962    if [ "$CDRECOVERY" = "yes" ] ; then
1963        if [ "$type" = "grub" ]; then
1964            # TODO: Which num ???
1965            echo -en "0\n"
1966        else
1967            echo -en "RESTORE\n"
1968        fi
1969    # In case it's mondoarchive
1970    elif [ _"$MONDO_SHARE" != _"" ]; then
1971        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1972            if [ "$type" = "grub" ]; then
1973                echo -en "3\n"
1974            else
1975                echo -en "iso\n"
1976            fi
1977        else
1978            if [ "$type" = "grub" ]; then
1979                echo -en "1\n"
1980            else
1981                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1982            fi
1983        fi
1984    else
1985        if [ "$type" = "grub" ]; then
1986            echo -en "0\n"
1987        else
1988            echo -en "expert\n"
1989        fi
1990    fi
1991
1992    # Handle timeout
1993    if [ "$type" = "grub" ]; then
1994        sep='='
1995    fi
1996    if [ "$CDRECOVERY" != "yes" ] ; then
1997        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1998    else
1999        echo -en "timeout${sep}10000\n"
2000    fi
2001    echo -en "\n"
2002
2003    # prepare which labels will be generated
2004    if [ "$CDRECOVERY" = "yes" ] ; then
2005        options="RESTORE expert"
2006    else
2007        if [ _"$MONDO_SHARE" != _"" ]; then
2008            options="interactive expert compare iso nuke isonuke"
2009        else
2010            options="expert"
2011        fi
2012    fi
2013
2014    # Generate rest of conf file
2015    for i in $options ; do
2016        ooo=$i
2017        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2018        if [ "$type" = "elilo" ]; then
2019            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2020        elif [ "$type" = "grub" ]; then
2021            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2022        elif [ "$type" = "grub2" ]; then
2023            if [ "$BOOT_TYPE" = "UEFI" ]; then
2024                lorder="linuxefi"
2025                iorder="initrdefi"
2026            else
2027                lorder="linux"
2028                iorder="initrd"
2029            fi
2030            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2031        else
2032            ps="/"
2033            if [ $KERNEL_IS_XEN = "no" ]; then
2034                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2035            else
2036                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2037            fi
2038        fi
2039        echo -en "$outstr"
2040    done
2041    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2042        if [ "$type" = "elilo" ]; then
2043            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2044            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2045        elif [ "$type" = "grub" ]; then
2046            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2047        elif [ "$type" = "grub2" ]; then
2048            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2049        else
2050            ps="/"
2051            if [ "$type" = "syslinux" ]; then
2052                ps=""
2053            fi
2054            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2055            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2056        fi
2057    fi
2058}
2059
2060ParseModprobeForIncludes() {
2061local MODPROBE_CONF mpincfile includes include
2062
2063MODPROBE_CONF=/etc/modprobe.conf
2064mpincfile=$1
2065touch $mpincfile
2066if [ -a $MODPROBE_CONF ]; then
2067    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2068    if [ -n "$includes" ]; then
2069        for include in $includes
2070        do
2071            if [ -a "$include" ]; then
2072                echo $include >> $mpincfile
2073            fi
2074        done
2075    fi
2076fi
2077}
2078
2079
2080PrepareDataDiskImages() {
2081    local needlist bigdir diskdir res i j k lines lfiles includefile
2082
2083    rm -f $MINDI_CACHE/mindi.iso
2084    needlist=$MINDI_TMP/what-we-need.txt
2085    bigdir=$MINDI_TMP/bigdir
2086    mkdir -p $bigdir/usr/bin
2087    mkdir -p $bigdir/usr/sbin
2088    includefile=$MINDI_TMP/$$.includefile.txt
2089
2090    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2091    if [ -e "$DEPLIST_FILE" ]; then
2092        lfiles="$DEPLIST_FILE $lfiles"
2093    fi
2094    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2095    ParseModprobeForIncludes $includefile
2096    lines=$(($lines+`cat $includefile | wc -l`))
2097    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2098    res=$?
2099    rm -f $includefile
2100    ListKernelModulePaths >> $needlist
2101    if [ "$res" -ne "0" ] ; then
2102        Die "You have $res files present in dependency list\nbut absent from filesystem."
2103    fi
2104    mkdir -p $bigdir/tmp
2105    if [ _"$MONDO_SHARE" != _"" ]; then
2106        # TODO: no reason to have the cfg file stored twice
2107        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2108        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2109    fi
2110
2111    # Needs to be done after the MRCFG creation
2112    FindAndAddUserKeyboardMappingFile
2113
2114    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2115    DropOptimizedLibraries $needlist $bigdir
2116    echo -en "INFO: Assembling dependency files"
2117
2118    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2119    echo -e "$DONE"
2120
2121    # also copy io.sys and msdos.sys, if we can find them
2122    for i in `mount | cut -d' ' -f3` ; do
2123        for j in io.sys msdos.sys ; do
2124            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2125        done
2126    done
2127
2128    # master boot record, too
2129    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2130    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2131        LogAll "INFO: Backing up $i's MBR"
2132        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2133        sleep 1
2134        sync
2135        j=$i
2136        [ -h "$j" ] && j=`readlink -f $j`
2137        LogAll "INFO: Creating /dev/boot_device ($j)"
2138        mkdir -p $bigdir/dev
2139        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2140    fi
2141
2142    # Get terminfo content
2143    ti="usr/share/terminfo/l"
2144    if [ -d /$ti ]; then
2145        mkdir -p $bigdir/$ti
2146        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2147    fi
2148    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2149        cp -Rdf $MONDO_SHARE/restore-scripts/mondo/* $bigdir/usr/bin 2>> $LOGFILE
2150        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2151        cp -Rdf $MONDO_SHARE/restore-scripts/etc/* $bigdir/etc 2>> $LOGFILE
2152    fi
2153    if [ -d "/lib/dev-state" ]; then 
2154        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2155    fi
2156    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2157    MakeMountlist $MINDI_TMP/mountlist.txt
2158    CheckMountlist $MINDI_TMP/mountlist.txt
2159    mkdir -p $bigdir/tmp
2160    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2161    if [ _"$MONDO_SHARE" != _"" ]; then
2162        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2163    fi
2164    if [ $LVM != "false" ]; then
2165        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2166        if [ $? -ne 0 ]; then
2167            LVM="false"
2168            rm -f $bigdir/tmp/i-want-my-lvm
2169        else
2170            LogFile "Your i-want-my-lvm file content is:"
2171            LogFile "-----------------------------------"
2172            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2173            LogFile "-----------------------------------"
2174        fi
2175    fi
2176    LogFile "INFO: Your mountlist.txt file content is:"
2177    LogFile "-----------------------------------"
2178    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2179    LogFile "-----------------------------------"
2180
2181    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2182    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2183    if [ _"$MONDO_SHARE" != _"" ]; then
2184        for q in filelist.full.gz biggielist.txt ; do
2185            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2186            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2187        done
2188    fi
2189
2190    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2191    # to get it on the media (in addition to the boot part
2192    # and also to support UEFI boot mechanism
2193    bootdir=$bigdir/syslinux
2194    bootconf="$bootdir/syslinux.cfg"
2195    boottype=syslinux
2196    mkdir -p $bootdir
2197    FindLdlinux32Binary
2198    if [ "$BOOT_TYPE" != "BIOS" ]; then
2199        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2200            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2201            MindiExit -1
2202        fi
2203        # EFI or UEFI
2204        # TODO: names are hard-coded for now
2205        if [ "$BOOT_TYPE" = "UEFI" ]; then
2206            # UEFI
2207            efidir=$bigdir/EFI/BOOT
2208            # On RHEL6 grub works
2209            dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2210            dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2211            if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2212                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2213                bootconf="$efidir/BOOTX64.conf"
2214                boottype=grub
2215            elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2216                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2217                bootconf="$efidir/grub.cfg"
2218                boottype=grub2
2219            elif [ $dname = "debian" ] && [ $dver = "8" ]; then
2220                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2221                bootconf="$efidir/grub.cfg"
2222                boottype=grub2
2223            else
2224                # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2225                FindSyslinux64EFI
2226                bootbin=$SYSLINUX64EFI
2227                bootconf="$efidir/syslinux.cfg"
2228            fi
2229
2230            # Depending on the arch, the target boot file is different
2231            if [ "$ARCH" = "x86_64" ] ; then
2232                tgbin="BOOTX64.efi"
2233            elif [ "$ARCH" = "armv8" ]; then
2234                tgbin="BOOTAA64.efi"
2235            else
2236                # i?386
2237                tgbin="BOOTIA32"
2238            fi
2239        else
2240            # EFI
2241            efidir=$bootdir
2242            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2243            tgbin=$bootbin
2244            boottype=elilo
2245            bootconf="$efidir/elilo.conf"
2246        fi
2247        LogAll "INFO: Found $boottype boot type"
2248
2249        # Copy it so that CD-ROM menu entry is satisfied
2250        mountefi=0
2251        df -T | grep /boot/efi | grep -qE 'vfat'
2252        if [ $? -ne 0 ]; then
2253            mount /boot/efi
2254            if [ $? -ne 0 ]; then
2255                echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2256                MindiExit -1
2257            fi
2258            mountefi=1
2259        fi
2260        mkdir -p $efidir
2261        cp $bootbin $efidir/$tgbin
2262        if [ $mountefi -eq 1 ]; then
2263            umount /boot/efi 2>&1 > /dev/null
2264        fi
2265
2266        if [ $boottype = "syslinux" ]; then
2267            FindLdlinuxe64Binary
2268            if [ -e "$LDLINUXE64" ]; then
2269                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2270                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2271                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2272            fi
2273        fi
2274        # In all cases prepare syslinux content for BIOS mode
2275        # so that we can have multi boot mode media BIOS+UEFI
2276        if [ -e "$LDLINUXC32" ]; then
2277            LogFile "INFO: Copying $LDLINUXC32 to $bigdir/EFI"
2278            cp $LDLINUXC32 "$bigdir/EFI" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bigtdir/EFI. Did you run out of disk space?"
2279        fi
2280    else
2281        # Useful for syslinux 5.x
2282        if [ -e "$LDLINUXC32" ]; then
2283            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2284            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir. Did you run out of disk space?"
2285        fi
2286    fi
2287
2288    # Here we need to know the ramdisk_size
2289    size_of_all_tools=`du -sk $bigdir | cut -f1`
2290    export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2291    LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2292
2293    MakeBootConfFile $boottype > $bootconf
2294    LogFile "Boot Conf file $bootconf content is:"
2295    LogFile "------------------------------------"
2296    cat $bootconf >> $LOGFILE
2297    LogFile "------------------------------------"
2298    if [ "$BOOT_TYPE" = "UEFI" ]; then
2299        # Also generate the syslinux conf
2300        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2301        LogFile "Boot Conf file $bigdir/EFI/syslinux.cfg content is:"
2302        LogFile "---------------------------------------------------"
2303        cat $bigdir/EFI/syslinux.cfg >> $LOGFILE
2304        LogFile "---------------------------------------------------"
2305    fi
2306
2307    echo -en "INFO: Tarring and zipping the data content..."
2308    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2309    LogFile "Size of the data content"
2310    LogFile "------------------------"
2311    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2312    LogFile "------------------------"
2313    echo -e "$DONE"
2314
2315    [ "$bigdir" != "/" ] && rm -rf $bigdir
2316    rm -f $needlist
2317}
2318
2319
2320Prompt() {
2321    echo -en "$1"
2322    read line
2323}
2324
2325
2326ReadLine() {
2327    local i incoming
2328    read incoming
2329    i=0
2330    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2331        i=$(($i+1))
2332        read incoming
2333    done
2334    echo "$incoming"
2335}
2336
2337
2338SizeOfPartition() {
2339    local devpath drive res stub
2340    device=$1
2341    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2342        Die "Cannot find $device's size - is your /etc/fstab sane?"
2343    fi
2344    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2345        res=`SizeOfRaidPartition $device`
2346        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2347        echo "$res"
2348        return 0
2349    fi
2350    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2351    res=`$FDISK -s $device 2>> $LOGFILE`
2352    # end patch
2353    # take only the first in case of multiple mount (cifs, nfs, ...)
2354    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2355    [ "$res" = "" ] && res="-1"
2356    echo $res
2357    return 0
2358}
2359
2360
2361SizeOfRaidPartition() {
2362    local real_dev smallest_size silly tmp
2363
2364    silly=999999999
2365    smallest_size=$silly
2366
2367    for real_dev in `GetRaidDevMembers $1` ; do
2368        tmp=`SizeOfPartition $real_dev`
2369        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2370    done
2371
2372    if [ "$smallest_size" = "$silly" ] ; then
2373        echo "-1"
2374        return 1
2375    else
2376        echo "$smallest_size"
2377        return 0
2378    fi
2379}
2380
2381
2382StripExecutable()
2383{
2384    local tmpfile
2385
2386    tmpfile=$MINDI_TMP/stripped.$$.dat
2387    [ -d "$1" ] || [ -h "$1" ] && return
2388    cp -f $1 $tmpfile 2>> $LOGFILE
2389    strip $tmpfile 2> /dev/null
2390    if [ $? -eq 0 ] ; then
2391        cp -f $tmpfile $1 2>> $LOGFILE
2392        LogFile "INFO: Stripped binary $2"
2393    fi
2394    rm -f $tmpfile
2395}
2396
2397KernelVer() {
2398        local fkern_ver fname
2399
2400        fname=$1
2401        file $fname | grep -q gzip
2402        if [ $? -eq 0 ] ; then
2403            # Used by ia64
2404            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2405        else
2406            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2407        fi
2408        echo "$fkern_ver"
2409}
2410
2411
2412# WARNING: This function should just echo the final result !!!
2413#
2414TryToFindKernelPath() {
2415    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2416
2417    we_want_version=$KERVERRUN
2418    possible_kernels=""
2419    duff_kernels=""
2420    output=""
2421
2422    if [ "$ARCH" = "ia64" ] ; then
2423       root="/boot/efi/efi"
2424    else
2425       root="/"
2426    fi
2427    # See if we're booted from a Xen kernel
2428    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2429    if [ -f /proc/xen/capabilities ]; then
2430        # It's a Xen kernel
2431        KERNEL_IS_XEN="yes"
2432        LogFile "INFO: It's a Xen kernel..."
2433    fi
2434
2435    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2436        [ ! -e "$fname" ] && continue
2437        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2438        fkern_ver=`KernelVer $fname`
2439        [ "$fkern_ver" = "" ] && continue
2440        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2441        [ -f "$fname" ] || continue
2442        [ -h "$fname" ] && continue
2443        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2444        file $fname | grep -q gzip
2445        if [ $? -eq 0 ] ; then
2446            # Used by ia64
2447            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2448                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2449                duff_kernels="$fname $duff_kernels"
2450            else
2451                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2452                possible_kernels="$fname $possible_kernels"
2453            fi
2454        else
2455            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2456                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2457                duff_kernels="$fname $duff_kernels"
2458            else
2459                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2460                possible_kernels="$fname $possible_kernels"
2461            fi
2462        fi
2463    done
2464    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2465        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
2466    fi
2467    if [ ! "$possible_kernels" ] ; then
2468        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2469        possible_kernels="$duff_kernels"
2470        if [ ! "$possible_kernels" ] ; then
2471            LogAll "INFO: Sorry, no duff kernels either"
2472        else
2473            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2474            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2475        fi
2476    fi
2477    if [ $KERNEL_IS_XEN = "yes" ]; then
2478        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2479        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2480    fi
2481    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2482    noof_kernels=`CountItemsIn "$possible_kernels"`
2483    if [ "$noof_kernels" -eq "0" ] ; then
2484        LogAll "Could not find your kernel."
2485        if [ -e "/boot/vmlinuz" ] ; then
2486            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2487            output=/boot/vmlinuz
2488        else
2489            output=""
2490        fi
2491    elif [ "$noof_kernels" -eq "1" ] ; then
2492        kp=`echo "$possible_kernels" | sed s/' '//`
2493        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2494        output="$kp"
2495    else
2496        for i in $possible_kernels ; do
2497            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2498                LogAll "INFO: OK, I used my initiative and found that "
2499                LogAll "INFO: $i is probably your kernel. "
2500                output="$i"
2501                break
2502            fi
2503        done
2504        if [ ! -n "$output" ]; then
2505            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2506                output=/boot/vmlinuz
2507                LogFile "INFO: Schlomo, this one's for you."
2508            else
2509                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2510                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2511                LogFile "INFO: $possible_kernels"
2512                output=""
2513            fi
2514        fi
2515    fi
2516    if [ $KERNEL_IS_XEN = "yes" ]; then
2517        if [ "$noof_xenkernels" -eq "0" ]; then
2518            xenkernelpath=""
2519        elif [ "$noof_xenkernels" -eq "1" ]; then
2520            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2521            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2522        else
2523            for i in $possible_xenkernels ; do
2524                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2525                    LogFile "INFO: OK, I used my initiative and found that "
2526                    LogFile "INFO: $i is probably your Xen kernel. "
2527                    xenkernelpath="$i"
2528                    break
2529                fi
2530            done
2531            if [ ! -n "$xenkernelpath" ]; then
2532                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2533                if [ ! -n "$new_possible_xenkernels" ]; then
2534                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2535                    LogFile "INFO: Using $xenkernelpath"
2536                else
2537                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2538                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2539                    LogFile "INFO: $possible_xenkernels"
2540                    output=""
2541                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2542                    LogFile "INFO: Using $xenkernelpath"
2543                fi
2544            fi
2545        fi
2546        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2547            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2548        fi
2549    fi
2550    #LogAll "TryToFindKernelPath found $output"
2551    echo "$output"
2552}
2553
2554
2555MakeBootInitFile() {
2556    local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2557
2558    tgz_dir_fname=$1
2559    rdz_fname=$2
2560    kernelsize=$3
2561    tempfile=$MINDI_TMP/temp.rd
2562    res=0 
2563    templog=$MINDI_TMP/$$.log
2564    > $templog
2565
2566    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2567    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2568    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2569    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2570    mkdir -p $mountpoint
2571    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2572
2573    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2574    for d in bin sbin lib lib64; do
2575        if [ -h "/$d" ]; then
2576            thelink=`readlink /$d`
2577            mkdir -p $mountpoint/$thelink || LogAll "ERROR: Unable to create $thelink in $mountpoint."
2578            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2579            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2580                rmdir $mountpoint/$d
2581            fi
2582            if [ ! -h $mountpoint/$d ]; then
2583                rm -f $mountpoint/$d 2> /dev/null
2584                (cd $mountpoint ; ln -s $thelink $d) || LogAll "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2585            fi
2586        fi
2587    done
2588
2589    LogFile "INFO: what is now in $mountpoint"
2590    ls -al $mountpoint >> $LOGFILE
2591   
2592    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2593    # copy from rootfs into mountpoint
2594    LogAll "INFO: Copying Mindi files onto $mountpoint"
2595    for f in $tgz_dir_fname/*; do 
2596        if [ ! -r $f ]; then
2597            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2598        else
2599            cp -af $f $mountpoint 2>&1 >> $LOGFILE
2600        fi
2601    done
2602    (cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2603    (cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2604
2605    (cd $mountpoint/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2606
2607    for w in insmod.static insmod.static.old ; do
2608        s=`which $w 2> /dev/null`
2609        if [ -e "$s" ] ; then
2610            tar cf - -C / $s 2> /dev/null | (cd $mountpoint ; tar xf -)
2611        fi
2612    done
2613
2614    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2615   
2616    # Copy of files mandatory for ssh to automate mount if sshfs is used
2617    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2618    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2619    cat > $mountpoint/tmp/myssh << EOF
2620ssh -o StrictHostKeyChecking=no $*
2621EOF
2622    chmod 755 $mountpoint/tmp/myssh
2623
2624    # Copy of files mandatory for ld.so
2625    cp -a /etc/ld.so.c* $mountpoint/etc
2626
2627    # Handle the case where busybox and mount are dynamically linked
2628    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2629    if [ $? -eq 0 ]; then
2630        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2631        rm -f $mountpoint/bin/mount
2632    fi
2633
2634    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2635    echo -en "INFO: Gathering dependencies of required files..."
2636    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2637    lines=`cat $DEPLIST_DIR/minimal.conf | grep -vE " *#.*|^#" | sort -u`
2638    noof_lines=`echo $lines | wc -w`
2639    progress=0
2640    for f in $lines; do
2641        if [ -d $f ]; then
2642            for g in `find $f`; do 
2643                echo $g >> $MINDI_TMP/minimal.lis
2644                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2645            done
2646        else 
2647            if [ -r $f ]; then
2648                echo $f >> $MINDI_TMP/minimal.lis
2649                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2650            fi
2651        fi
2652        progress=$(($progress+1))
2653        LogProgress $progress $noof_lines
2654    done
2655    echo -e "$DONE"
2656    echo -en "INFO: Processing all dependencies links..."
2657    lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
2658    noof_lines=`echo $lines | tr ' ' '\n' | wc -l`
2659    progress=0
2660    for f in $lines; do
2661        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2662        progress=$(($progress+1))
2663        LogProgress $progress $noof_lines
2664    done
2665    echo -e "$DONE"
2666    # Initial / are trucated by tar
2667    finallist=""
2668    # Remove directories from the list, as tar/cp will create them anyway
2669    # and it may hurt if /lib is in it as on Debian/Ubuntu
2670    # recent bash says that -d is true for a link to a dir !
2671    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2672        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2673            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2674            if [ ! -e "$mountpoint/$f" ]; then
2675                finallist="$finallist $f"
2676            fi
2677        fi
2678    done
2679    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2680
2681    fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2682    LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
2683    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogAll "WARNING: Problem in minimal analysis" $templog
2684
2685    # In case target /bin dir still doesn't exist, create it before using it
2686    if [ ! -d $mountpoint/bin ]; then
2687        mkdir -p $mountpoint/bin
2688    fi
2689
2690    # For older distributions expecting /sbin/init provides it
2691    if [ ! -e "$mountpoint/sbin/init" ]; then
2692        (cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2693    fi
2694
2695    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2696    (cd $mountpoint ; ln -sf /bin/bash bin/sh)
2697    LogFile "INFO: Using bash as default shell"
2698
2699    # Avoids an issue on some distro (RHEL5)
2700    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2701
2702    # Management of udev (which includes modprobe in rules)
2703    ps auxww | grep -v grep | grep -qw udevd
2704    if [ $? -eq 0 ]; then
2705        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2706        LogFile "INFO: udev device manager found"
2707        tar cf - -C / /etc/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /etc/udev analysis" $templog
2708        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2709        rm -f $mountpoint/etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2710        # Do not do it if it's a link (Ubuntu 64 bits #503)
2711        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2712            tar cf - -C / /lib64/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib64/udev analysis" $templog
2713        fi
2714        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2715            tar cf - -C / /lib32/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib32/udev analysis" $templog
2716        fi
2717        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2718            tar cf - -C / /lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /lib/udev analysis" $templog
2719        fi
2720        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2721            tar cf - -C / /usr/lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogAll "ERROR: Problem in /usr/lib/udev analysis" $templog
2722        fi
2723        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2724            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2725            lis=""
2726            # Get only the files which exist in that list
2727            # and potentially their symlink structure
2728            for i in $lis2; do
2729                if [ -h $i ]; then
2730                    j=$i
2731                    while [ -h $j ]; do
2732                        lis="$lis $j"
2733                        j=`readlink -f $j`
2734                    done
2735                    lis="$lis $j"
2736                elif [ -d $i ]; then
2737                    lis3="$lis3 $i"
2738                elif [ -f $i ]; then
2739                    lis="$lis $i"
2740                fi
2741            done
2742            # And their deps
2743            LocateDeps $lis > $MINDI_TMP/udev.lis
2744            for i in $lis; do
2745                if [ "`echo $i | cut -c1`" = "/" ]; then
2746                    j=`echo $i | cut -c2-`
2747                    [ "$j" != "" ] && rm -f $mountpoint/$j
2748                fi
2749                echo "$i" >> $MINDI_TMP/udev.lis
2750            done
2751            finallist=""
2752            # Remove directories from the list, as tar/cp will create them anyway
2753            # and it may hurt if /lib is in it as on Debian/Ubuntu
2754            # recent bash says that -d is true for a link to a dir !
2755            for f in `sort -u $MINDI_TMP/udev.lis`; do
2756                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2757                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2758                    if [ ! -e "$mountpoint/$f" ]; then
2759                        finallist="$finallist $f"
2760                    fi
2761                fi
2762            done
2763            # But adds the directory useful for udev in $lis3
2764            fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2765            LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
2766            cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog  || LogAll "WARNING: Problem in udev.lis analysis" $templog
2767            rm -f $MINDI_TMP/udev.lis
2768        else
2769            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2770            LogAll "         mindi will use static devices which may cause problems"
2771            rm -f $mountpoint/tmp/USE-UDEV
2772        fi
2773    fi
2774
2775    # Management of potential HW info (ProLiant only at the moment)
2776    rm -rf $MINDI_CACHE/bkphw
2777    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2778    if [ -d $MINDI_CACHE/bkphw ]; then
2779        LogAll "INFO: Hardware Information found and saved ..."
2780        cp -rp $MINDI_CACHE/bkphw $mountpoint
2781        if [ -f $MINDI_CACHE/tools.files ]; then
2782            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2783            LocateDeps $lis > $MINDI_TMP/tools.lis
2784            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in tools.lis analysis" $templog
2785        fi
2786        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2787            mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2788            chmod 755 $mountpoint/mindi-rsthw
2789        fi
2790        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2791    fi
2792
2793    # Management of perl scripts delivered needed at restore time
2794    LogAll "INFO: Analyzing perl modules dependencies..."
2795    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogAll "ERROR: Problem in mindi-get-perl-modules" $templog
2796    LogFile "DBG4: Perl Modules found:"
2797    LogFile "-------------------------"
2798    cat $MINDI_TMP/perl.lis >> $LOGFILE
2799    LogFile "-------------------------"
2800    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in perl scripts analysis" $templog
2801
2802    for w in cdrom groovy-stuff ; do
2803        mkdir -p mnt/$w
2804    done
2805
2806    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in fd dev analysis" $templog
2807
2808    needed_modules=""
2809    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2810
2811    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2812        # For PXE boot
2813        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2814    fi
2815    for i in $DENY_MODS; do
2816        LogFile "INFO: Removing $i from the list of modules to load"
2817        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2818    done
2819
2820    if [ "${kernelname}" != "" ]; then
2821        needed_modules_path=lib/modules/${kernelname}
2822        mkgmopt="-k ${kernelname}"
2823    else
2824        needed_modules_path=lib/modules/$KERVERRUN
2825        mkgmopt="-k $KERVERRUN"
2826    fi
2827
2828    [ -e "/$needed_modules_path" ] || LogAll "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2829    LogAll "INFO: Analyzing kernel modules dependencies..."
2830    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2831
2832    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2833    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogAll "ERROR: Unable to copy modules to $mountpoint" $templog
2834
2835    # Uncompress modules if not using udev and native modprobe
2836    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2837        for i in $needed_modules; do
2838            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2839                gunzip -f $mountpoint/$i
2840            fi
2841            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2842                bunzip2 -f $mountpoint/$i
2843            fi
2844            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2845                unxz -f $mountpoint/$i
2846            fi
2847            LogFile "INFO: Uncompressing $i"
2848        done
2849    fi
2850
2851    # Also copy modules.* in case of udev so that normal modprobe works
2852    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogAll "ERROR: Unable to copy modules.* to $mountpoint" $templog
2853
2854    # Copy FW in case some drivers needs it
2855    for d in "/lib" "/usr/lib"; do
2856        if [ -d "$d/firmware" -a ! -h $d ]; then
2857            cp -a "$d/firmware" "$mountpoint/$d"
2858        fi
2859    done
2860
2861    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2862    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2863        if [ -d "$d/multipath" -a ! -h $d ]; then
2864            cp -a "$d/multipath" "$mountpoint/$d"
2865        fi
2866    done
2867
2868    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2869    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2870
2871    # Copy an additional ProLiant tool for OBDR support
2872    if [ -f $MINDI_TMP/OBDR ]; then
2873        found=0
2874        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2875            mkdir -p $mountpoint/usr/bin
2876            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2877            LogAll "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2878            found=1
2879        fi
2880        if [ -x /usr/bin/sg_wr_mode ]; then
2881            mkdir -p $mountpoint/usr/bin
2882            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2883            LocateDeps $lis > $MINDI_TMP/obdr.lis
2884            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogAll "ERROR: Problem in obdr.lis analysis" $templog
2885            LogAll "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2886            found=1
2887        fi
2888        if [ $found -eq 0 ]; then
2889            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2890            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2891        fi
2892    fi
2893
2894    if [ ! -e "/sbin/devfsd" ]; then
2895        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2896        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2897        rm -f $mountpoint/sbin/devfsd
2898    fi
2899    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2900    if [ _"$MONDO_SHARE" != _"" ]; then
2901        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2902        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2903        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2904        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2905        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2906    fi
2907
2908    # Create module list to load at restore time
2909    rm -f $mountpoint/tmp/modules
2910    for m in $CDROM_MODS; do
2911        echo $m >> $mountpoint/tmp/modules
2912    done
2913
2914    mkdir -p $mountpoint/proc
2915    LogFile "---------------------------"
2916    LogFile "Size of initial ramdisk:"
2917    LogFile "---------------------------"
2918    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2919    LogFile "---------------------------"
2920    LogFile "Content of initial ramdisk:"
2921    LogFile "---------------------------"
2922    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2923    LogFile "---------------------------"
2924
2925    # Determine what filesystem to use for initrd image
2926    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2927    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2928    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2929    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2930        # say what will be used
2931        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2932        # kernel expects linuxrc in ext2 filesystem
2933        (cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2934        # unmount loop filesystem and create image file using the standard approach
2935        sync
2936        umount $mountpoint || Die "Cannot unmount $tempfile"
2937        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2938        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2939            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2940        else
2941            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2942        fi
2943        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2944        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2945        rm -f ${rdz_fname}.tmp
2946        # log that we are done
2947    elif [ "$gvFileSystem" = "initramfs" ]; then
2948        # say what will be used
2949        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2950        # make sure that cpio is there
2951        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2952        # kernel expects init in cpio filesystem
2953        (cd "$mountpoint" ; ln -sf usr/sbin/init init)
2954        # create cpio image file and unmount loop filesystem
2955        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
2956        sync
2957        umount $mountpoint || Die "Cannot unmount $tempfile"
2958        # log that we are done
2959    else
2960        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2961    fi
2962
2963    if [ "$res" -eq "0" ] ; then
2964        LogAll "INFO: MakeBootInitFile finished without error."
2965    else
2966        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
2967    fi
2968    return 0
2969}
2970
2971
2972##############################################################################
2973#----------------------------------- Main -----------------------------------#
2974##############################################################################
2975
2976# Now we can create what we need
2977mkdir -p $MINDI_TMP
2978
2979# --nolog needs to be first, and is used in analyze-my-lvm
2980if [ "$1" = "--nolog" ] ; then
2981    shift
2982    LOGFILE=/dev/stderr
2983else
2984    > $LOGFILE
2985fi
2986if [ "$1" = "--printvar" ] ; then
2987    shift
2988    if [ _"$1" != _"" ] ; then
2989        set | grep -Ew "^$1" | cut -d= -f2
2990    fi
2991    exit 0
2992fi
2993
2994LogFile "mindi v$MINDI_VERSION"
2995LogFile "-----------------------------"
2996LogFile "Start date : `date`"
2997LogFile "-----------------------------"
2998LogFile "$ARCH architecture detected"
2999LogFile "mindi called with the following arguments:"
3000echo "$@">> $LOGFILE
3001LogFile "-----------------------------"
3002LogFile "pbdistrocheck results:"
3003pbdistrocheck >> $LOGFILE
3004LogFile "-----------------------------"
3005
3006# Log some capital variables
3007[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
3008[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
3009LogFile "MONDO_SHARE = $MONDO_SHARE"
3010LogFile "MINDI_LIB = $MINDI_LIB"
3011LogFile "MINDI_SBIN = $MINDI_SBIN"
3012LogFile "MINDI_CONF = $MINDI_CONF"
3013# Purge from potential old run
3014if [ _"$MINDI_CACHE" = _"" ]; then
3015    Die "MINDI_CACHE undefined"
3016else
3017    LogFile "MINDI_CACHE = $MINDI_CACHE"
3018fi
3019
3020if [ -f $MINDI_CONFIG ]; then
3021    LogFile "-----------------------------"
3022    LogFile " Mindi configuration file    "
3023    LogFile "-----------------------------"
3024    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3025    LogFile "-----------------------------"
3026fi
3027LogFile "In Mindi"
3028LogFile "--------"
3029LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3030LogFile "--------"
3031
3032trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3033
3034# Sanity checks
3035which which > /dev/null 2> /dev/null || Die "Please install 'which'."
3036which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
3037which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3038which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
3039if which awk &> /dev/null ; then
3040    if ! which gawk &> /dev/null ; then
3041        LogAll "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3042    fi
3043fi
3044which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3045[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3046
3047[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3048
3049# Update the PATH variable if incomplete
3050if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3051    PATH=$PATH:/sbin:/usr/sbin
3052    export PATH
3053    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3054    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3055    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3056fi
3057
3058if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3059    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3060fi
3061
3062### TODO
3063### Fix as it's not mandatory on ia64
3064if [ "$ARCH" = "ia64" ] ; then
3065    if which elilo &> /dev/null ; then
3066        LILO_EXE=elilo
3067    else
3068        LILO_EXE=`which false 2> /dev/null`
3069    fi
3070else
3071    FindIsolinuxBinary
3072fi
3073trap "Aborted" SIGTERM
3074DONE="\r\t\t\t\t\t\t\t\tDone.         "
3075kernelpath=""
3076MONDO_ROOT=/var/cache/mondo
3077mkdir -p $MONDO_ROOT
3078
3079if [ -d "/proc/lvm" ]; then
3080    # LVM v1
3081    LVMCMD=""
3082    LVM="v1"
3083elif [ -d "/dev/mapper" ]; then
3084    # LVM v2
3085    LVMCMD="lvm"
3086    LVM="v2"
3087else
3088    LVM="false"
3089fi
3090
3091if [ -e "/proc/cmdline" ]; then
3092    CMDLINE="/proc/cmdline"
3093elif [ -e "/tmp/cmdline" ]; then
3094    CMDLINE="/tmp/cmdline"
3095else
3096    CMDLINE="/dev/null"
3097fi
3098
3099LogFile "INFO: LVM set to $LVM"
3100LogFile "----------"
3101LogFile "mount result:"
3102LogFile "-------------"
3103mount >> $LOGFILE
3104if [ -e "/etc/raidtab" ]; then
3105    LogFile "-------------"
3106    LogFile "/etc/raidtab content:"
3107    LogFile "-------------"
3108    cat /etc/raidtab >> $LOGFILE
3109else
3110    LogFile "No file /etc/raidtab"
3111fi
3112if [ -e "/etc/mdadm.conf" ]; then
3113    LogFile "-------------"
3114    LogFile "/etc/mdadm.conf content:"
3115    LogFile "-------------"
3116    cat /etc/mdadm.conf >> $LOGFILE
3117else
3118    LogFile "-------------"
3119    LogFile "No file /etc/mdadm.conf"
3120fi
3121LogFile "-------------"
3122LogFile "cat $CMDLINE"
3123LogFile "-------------"
3124cat $CMDLINE >> $LOGFILE
3125LogFile "-------------"
3126LogFile "cat /proc/swaps:"
3127LogFile "-------------"
3128cat /proc/swaps >> $LOGFILE
3129LogFile "-------------"
3130if [ -e "/proc/mdstat" ]; then
3131    LogFile "cat /proc/mdstat:"
3132    LogFile "-------------"
3133    cat /proc/mdstat >> $LOGFILE
3134else
3135    LogFile "No pseudo file /proc/mdstat"
3136fi
3137LogFile "-------------"
3138LogFile "cat /proc/partitions:"
3139LogFile "-------------"
3140cat /proc/partitions >> $LOGFILE
3141LogFile "-------------"
3142LogFile "cat /proc/filesystems:"
3143LogFile "-------------"
3144cat /proc/filesystems >> $LOGFILE
3145LogFile "-------------"
3146LogFile "lsmod result:"
3147LogFile "-------------"
3148lsmod >> $LOGFILE
3149MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3150if [ -x /usr/sbin/esxcfg-module ]; then
3151    LogFile "-------------"
3152    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3153    LogFile "-------------"
3154    LogFile "VMWare modules"
3155    LogFile "-------------"
3156    /usr/sbin/esxcfg-module -l >> $LOGFILE
3157    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3158fi
3159LogFile "-------------" 
3160LogFile "FORCE_MODS:"
3161LogFile "-------------"
3162LogFile "$FORCE_MODS"
3163LogFile "-------------"
3164LogFile "DENY_MODS:"
3165LogFile "-------------"
3166LogFile "$DENY_MODS"
3167LogFile "-------------"
3168LogFile "df result:"
3169LogFile "----------"
3170df -aT >> $LOGFILE
3171LogFile "-------------"
3172LogFile "df -i result:"
3173LogFile "----------"
3174df -i >> $LOGFILE
3175LogFile "-------------"
3176if [ -r /boot/grub/menu.lst ]; then
3177    LogFile "-------------"
3178    LogFile "INFO: /boot/grub/menu.lst content"
3179    LogFile "-------------"
3180    cat /boot/grub/menu.lst >> $LOGFILE
3181    LogFile "-------------"
3182fi
3183if [ -r /boot/grub/grub.conf ]; then
3184    LogFile "-------------"
3185    LogFile "INFO: /boot/grub/grub.conf content"
3186    LogFile "-------------"
3187    cat /boot/grub/grub.conf >> $LOGFILE
3188    LogFile "-------------"
3189fi
3190if [ -r /boot/grub/grub.cfg ]; then
3191    LogFile "-------------"
3192    LogFile "INFO: /boot/grub/grub.cfg content"
3193    LogFile "-------------"
3194    cat /boot/grub/grub.cfg >> $LOGFILE
3195    LogFile "-------------"
3196fi
3197if [ -r /boot/grub/device.map ]; then
3198    LogFile "-------------"
3199    LogFile "INFO: /boot/grub/device.map content"
3200    LogFile "-------------"
3201    cat /boot/grub/device.map >> $LOGFILE
3202    LogFile "-------------"
3203fi
3204if [ -r /etc/lilo.conf ]; then
3205    LogFile "-------------"
3206    LogFile "INFO: /etc/lilo.conf content"
3207    LogFile "-------------"
3208    cat /etc/lilo.conf >> $LOGFILE
3209fi
3210if [ -d /boot/efi ]; then
3211    gcf=`find /boot/efi -name 'grub.c*'`
3212    if [ _"$gcf" = _"" ]; then
3213        LogFile "Found a /boot/efi directory without a grub config file in it"
3214    else
3215        LogFile "-------------"
3216        LogFile "INFO: $gcf content"
3217        LogFile "-------------"
3218        cat $gcf >> $LOGFILE
3219        LogFile "-------------"
3220    fi
3221fi
3222
3223LogFile "Full fdisk info"
3224LogFile "---------------"
3225$FDISK -l >> $LOGFILE
3226LogFile "----------------"
3227
3228# Compute libata version
3229laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3230# If libata v2 is used then remove ide-generic as it will perturbate boot
3231if [ "`echo $MODULES | grep libata`" ]; then
3232    if [ "$laver" = "2" ]; then
3233        DENY_MODS="$DENY_MODS ide-generic"
3234        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3235        LogFile "-------------"
3236    fi
3237fi
3238
3239# Check for McAfee which disturbs the access to some files (tgz in articular)
3240if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3241    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3242    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3243    LogFile "WARNING: You have two options:"
3244    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3245    LogFile "WARNING:  - Disable the scanner during the backup"
3246fi
3247
3248#
3249# If we have a USB device we need to store info
3250# and remove it from the parameters line
3251#
3252if [ "$#" -ne "0" ] ; then
3253    if [ "$1" = "--usb" ] ; then
3254        shift
3255        USBDEVICE=$1
3256        if [ _"$USBDEVICE" = _"" ]; then
3257            Die "No USB device specified"
3258        fi
3259        shift
3260    fi
3261fi
3262
3263if [ "$#" -ne "0" ] ; then
3264    if [ "$1" = "--findkernel" ] ; then
3265        resk=`TryToFindKernelPath`
3266        # Avoids logfile content for mondo
3267        export MONDO_SHARE=""
3268        if [ "$resk" = "" ] ; then
3269            if [ $KERNEL_IS_XEN = "yes" ]; then
3270                echo "$xenkernelpath"
3271                LogFile "INFO: xenkernelpath = $xenkernelpath"
3272                MindiExit 0
3273            else
3274                MindiExit -1
3275            fi
3276        else
3277            echo "$resk"
3278            LogFile "INFO: kernelpath = $resk"
3279            MindiExit 0
3280        fi
3281    elif [ "$1" = "--locatedeps" ] ; then
3282        [ ! "$2" ] && Die "Please specify the binary to look at"
3283        LocateDeps $*
3284        # Avoids logfile content for mondo
3285        export MONDO_SHARE=""
3286        MindiExit $?
3287    elif [ "$1" = "--readalllink" ] ; then
3288        [ ! "$2" ] && Die "Please specify the binary to look at"
3289        # Avoids logfile content for mondo
3290        export MONDO_SHARE=""
3291        mr-read-all-link $2
3292        MindiExit $?
3293    elif [ "$1" = "--makebcf" ] ; then
3294        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3295        MakeBootConfFile $2
3296        MindiExit 0
3297    elif [ "$1" = "--makemessage" ] ; then
3298        MakeMessageFile | cut -c1-80
3299        MindiExit 0
3300    elif [ "$1" = "--makemountlist" ] ; then
3301        [ ! "$2" ] && Die "Please specify the output file"
3302        MakeMountlist $2
3303        CheckMountlist $2
3304        # Avoids logfile content for mondo
3305        export MONDO_SHARE=""
3306        MindiExit $?
3307    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3308        echo "Mindi v$MINDI_VERSION"
3309        # Avoids logfile content for mondo
3310        export MONDO_SHARE=""
3311        MindiExit 0
3312    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3313        MONDO_TMP=$2
3314        # Change MINDI_TMP for the one provided by mondo
3315        # So that it can get back the built files
3316        if [ _"$MONDO_TMP" = _"" ]; then
3317            Die "MONDO_TMP is empty, aborting"
3318        fi
3319        if [ _"$MONDO_TMP" = _"/" ]; then
3320            Die "MONDO_TMP is /, aborting"
3321        fi
3322        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3323        rmdir $MINDI_TMP
3324        export MINDI_TMP=$MONDO_TMP
3325        mkdir -p $MINDI_TMP
3326
3327        # This is the scratch dir in mondo - subdir images
3328        MINDI_CACHE=$3
3329        LogFile "MINDI_CACHE = $MINDI_CACHE"
3330
3331        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3332        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3333       
3334###
3335### Sq-Modification...
3336### Attempt to locate kernel specific module path
3337### if module path is found then use it other wise use uname -r to set it...
3338###
3339        if [ $KERNEL_IS_XEN = "yes" ]; then
3340            LogAll "INFO: xenkernelpath = $xenkernelpath"
3341        fi
3342        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3343        if [ ! -d "/lib/modules/$kernelname" ]; then
3344           LogAll "WARNING: Module path for ${kernelpath} not found..."
3345           LogAll "         using running kernel\'s modules."
3346           kernelname=$KERVERRUN
3347        else
3348           LogAll "INFO: Using modules for kernel: ${kernelname}"
3349        fi
3350        LogAll "INFO: kernelname = $kernelname"
3351        LogAll "INFO: kernelpath = $kernelpath"
3352###
3353### end of Sq-Modification
3354###
3355        TAPEDEV=$5
3356        TAPESIZE=$6
3357        FILES_IN_FILELIST=$7
3358        USE_LZO=$8
3359        CDRECOVERY=$9
3360        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3361            IMAGE_DEVS=""
3362        else
3363            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3364        fi
3365        if [ "${11}" ] ; then
3366            LILO_OPTIONS=""
3367    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3368        fi
3369        LAST_FILELIST_NUMBER=${12}
3370        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3371        export MINDI_EXCLUDE_DEVS="${14}"
3372        USE_COMP="${15}"
3373        USE_LILO="${16}"
3374        USE_STAR="${17}"
3375        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3376        DIFFERENTIAL="${19}"
3377        USE_GZIP="${20}"
3378        USE_LZMA="${21}"
3379        NOT_BOOT="${22}"
3380        BOOT_TYPE="${23}"
3381        [ "$USE_COMP" = "" ] && USE_COMP=yes
3382        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3383        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3384        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3385        [ "$TAPEDEV" ] && LogAll "INFO: This is a tape-based backup. Fine."
3386        # MONDO_ROOT is the real scratchdir
3387        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3388        if [ _"$MONDO_ROOT" != _"" ]; then
3389            mkdir -p $MONDO_ROOT
3390        else
3391            Die "MONDO_ROOT is undefined"
3392        fi
3393    else
3394        LogScreen "Syntax: mindi (--custom ....)"
3395        MindiExit -1
3396    fi
3397fi
3398
3399if [ _"$MINDI_CACHE" != _"" ]; then
3400    rm -rf $MINDI_CACHE/* 2> /dev/null
3401    mkdir -p $MINDI_CACHE
3402fi
3403
3404[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3405
3406if [ _"$MONDO_SHARE" = _"" ]; then
3407    LogAll "Mindi Linux mini-distro generator v$MINDI_VERSION"
3408    LogAll "Latest Mindi is available from http://www.mondorescue.org"
3409    LogAll "BusyBox sources are available from http://www.busybox.net"
3410    LogAll "------------------------------------------------------------------------------"
3411else
3412    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3413fi
3414if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3415    LogAll "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3416else
3417    LogAll "ERROR: Unable to find mindi-busybox, please install it"
3418    MindiExit -1
3419fi
3420
3421for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3422    modinfo $i 2> /dev/null 1> /dev/null
3423    if [ $? -eq 0 ]; then
3424        modprobe $i 2>&1 > /dev/null
3425    fi
3426done
3427
3428LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3429LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3430LogFile "NOT_BOOT = '$NOT_BOOT'"
3431if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3432    LogAll "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3433    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3434    MakeMountlist $MINDI_TMP/mountlist.txt
3435    CheckMountlist $MINDI_TMP/mountlist.txt
3436    mkdir -p $MINDI_TMP/small-all/tmp
3437    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} $MINDI_TMP/small-all/tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3438    (cd $MINDI_TMP/small-all ; tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log)
3439    sleep 2
3440    LogAll "Done. Exiting."
3441    MindiExit 0
3442fi
3443
3444if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3445    LogAll "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3446fi
3447
3448if [ "$kernelpath" = "" ] ; then
3449    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3450    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3451    read ch
3452    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3453        USE_OWN_KERNEL="yes"
3454    else
3455        USE_OWN_KERNEL="no"
3456    fi
3457    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3458        kernelpath=`TryToFindKernelPath`
3459        if [ "$kernelpath" = "" ] ; then
3460            echo -n "Please enter kernel path : "
3461            read kernelpath
3462        fi
3463    fi
3464fi
3465
3466echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3467[ "$(($RANDOM%64))" -eq "0" ] && LogAll "INFO: Dude, I've looked inside your computer and it's really dusty..."
3468
3469mountpoint=$MINDI_TMP/mountpoint.$$
3470PrepareDataDiskImages
3471
3472MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not create initrd.img"
3473
3474[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3475...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3476
3477if [ _"$MONDO_SHARE" = _"" ]; then
3478    OfferToMakeBootableISO
3479    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3480        OfferToMakeBootableUSB
3481    fi
3482    LogAll "INFO: Mindi Finished"
3483elif [ "$TAPEDEV" ] ; then
3484    if [ "$ARCH" != "ia64" ] ; then
3485        # We need to keep the img file as boot file for ia64 platform
3486        rm -f $MINDI_CACHE/{*img,*iso}
3487    else
3488        rm -f $MINDI_CACHE/*iso
3489    fi
3490    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3491        OfferToMakeBootableUSB
3492    fi
3493    OfferToMakeBootableISO
3494    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3495        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3496    else
3497        Die "Cannot find all.tar.gz, to be written to tape"
3498    fi
3499elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3500    OfferToMakeBootableUSB
3501else
3502    OfferToMakeBootableISO
3503fi
3504
3505if [ -f $MINDI_TMP/$MRCFG ]; then
3506    LogFile "INFO: Your $MRCFG file is:"
3507    LogFile "--------------------------"
3508    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3509    LogFile "--------------------------"
3510else
3511    if [ _"$MONDO_SHARE" != _"" ] ; then
3512        LogAll "ERROR: You don't have a $MRCFG file !"
3513    fi
3514fi
3515# cleanup
3516MindiExit 0
Note: See TracBrowser for help on using the repository browser.