source: branches/3.2/mindi/mindi @ 3542

Last change on this file since 3542 was 3542, checked in by Bruno Cornec, 4 years ago
  • Rename all mondorestore scripts with the mr- prefix and adapt callers
  • Place these scripts in /usr/bin on the restore media
  • Fix a mindi bug where these scripts were not copied anymore with previous modifications around removal of cd
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 123.6 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3542 2016-03-24 16:48:03Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=150000      # increase if you run out of ramdisk space
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa hpdsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi_Image -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136else
137    # Find MBR in case of bootable USB device to build
138    MBRFILE=/usr/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
140    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
141    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
142    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
143fi
144
145# Function to log on screen only
146LogScreen() {
147        if [ -e /dev/stderr ] ; then
148        echo -e "$1" >> /dev/stderr
149    elif [ -e /usr/bin/logger ] ; then
150        /usr/bin/logger -s $1
151    fi
152}
153
154# Function to log in log file only
155LogFile() {
156
157    echo -e "$1" >> $LOGFILE
158    if [ _"$2" != _"" ]; then
159        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
160        rm -f "$2"
161    fi
162}
163
164# Function to log in both screen and logfile
165LogAll() {
166    LogScreen "$1"
167    LogFile "$1" "$2"
168}
169
170# Preserved for compatibility
171LogIt() {
172    LogAll "$1" "$2"
173}
174
175# Last function called before exiting
176# Parameter is exit code value
177# Should be declared here as used immediately below potentialy
178MindiExit() {
179    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
180    LogFile "INFO: End date : `date`" 
181    if [ _"$MONDO_SHARE" != _"" ] ; then
182        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
183        if [ -f $LOGFILE ]; then
184            cat $LOGFILE >> /var/log/mondoarchive.log
185        else
186            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
187        fi
188        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
189    fi
190
191    cd /
192    sync&
193
194    # Clean temporary files only when standalone mindi
195    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
196        rm -Rf $MINDI_TMP
197    fi
198    exit $1
199}
200
201Die() {
202    local i
203    if [ "$1" = "" ] ; then
204        LogAll "FATAL ERROR"
205    else
206        LogAll "FATAL ERROR. $1"
207    fi
208    if [ _"$2" != _"" ]; then
209        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
210    fi
211    rm -f "$2"
212
213    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
214    LogAll "See http://www.mondorescue.org for more information."
215    LogAll "WE CANNOT HELP unless you enclose that file.\n"
216    MindiExit -1
217}
218
219# Now we can create what we need
220MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
221if [ $? -ne 0 ]; then
222    df $TMPDIR
223    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
224fi
225if [ _"$MINDI_TMP" = _"" ]; then
226    Die "MINDI_TMP is empty, aborting"
227fi
228if [ _"$MINDI_TMP" = _"/" ]; then
229    Die "MINDI_TMP is /, aborting"
230fi
231export MINDI_TMP
232
233# ----------------------------------------------------------------------------
234
235
236AbortHere() {
237    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
238    Die "Program is terminating in response to signal received from OS/user"
239}
240
241
242Aborted() {
243    trap SIGHUP SIGTERM SIGTRAP SIGINT
244    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
245    Die "User abort."
246}
247
248
249AddFileToCfgIfExists() {
250    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
251}
252
253
254AddKeyboardMappingFile() {
255    local mappath r included_list included_item i res ii sss
256    mappath=$1
257    KBDEPTH=$(($KBDEPTH+1))
258    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
259    if [ -e "$bigdir/$mappath" ] ; then
260        LogFile "INFO: $mappath already added"
261        return
262    elif [ -d "$bigdir/$mappath" ] ; then
263        echo "Cannot add $mappath: it's a directory. Sorry."
264        return
265    fi
266    LogFile "INFO: Added kbd map $mappath"
267    if [ ! -e "$mappath" ] ; then
268        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
269        if [ ! -e "$mappath" ] ; then
270            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
271            return
272        fi
273    fi
274
275    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
276    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
277        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
278    else
279        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
280    fi
281    for included_item in $included_list ; do
282        if [ ! -e "$included_item" ] ; then
283            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
284            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
285            for ii in $sss ; do
286                    [ -e "$ii" ] && AddKeyboardMappingFile $ii
287            done
288        else
289            AddKeyboardMappingFile $included_item
290        fi
291    done
292}
293
294
295CopyDependenciesToDirectory() {
296    local outdir incoming counter d found tdir templog
297    outdir=$1
298    templog=$MINDI_TMP/$$.log
299    mkdir -p $outdir
300    incoming=`ReadLine`
301    counter=$3
302    > $templog
303
304    while [ "$incoming" != "" ] ; do
305        if [ "$3" = "1" ]; then
306            counter=$(($counter+1))
307            LogProgress $counter $2
308        fi
309        # Non absolute file names should not arrive till here => skipped
310        if [ `echo "$incoming" | cut -c1` != '/' ]; then
311            LogAll "WARNING: Unable to handle $incoming"
312            incoming=`ReadLine`
313            continue
314        fi
315        # no parent directory of incoming should be a link, copy is not possible in that case
316        d=`dirname "$incoming"`
317        found="false"
318        while [ $d != "/" -a $found = "false" ]; do
319            [ -h "$d" ] && found="true"
320            d=`dirname "$d"`
321        done
322        if [ -d "$incoming" -a ! -h "$incoming" ]; then
323            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
324        elif [ -e "$incoming" ] && [ $found = "false" ]; then
325            if [ ! -h "$incoming" ]; then
326                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
327            else
328                tdir=`dirname "$incoming"`
329                if [ ! -e "$outdir/$tdir" ]; then
330                    mkdir -p "$outdir/$tdir"
331                fi
332                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
333            fi
334            # Only uncompress modules if not using udevd
335            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
336                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
337            fi
338            [ -x "$outdir" ] && StripExecutable $outdir
339        fi
340        incoming=`ReadLine`
341    done
342}
343
344
345CountItemsIn() {
346    local r
347    r=0
348    for q in $1 ; do
349        r=$(($r+1))
350    done
351    echo $r
352}
353
354
355DropOptimizedLibraries() {
356    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
357    filelist=$1
358    outdir=$2
359
360    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
361    if [ "$list_of_optimized_libraries" = "" ] ; then
362        return 0
363    fi
364    echo -en "Dropping i686-optimized libraries if appropriate"
365    for optimized_lib_name in $list_of_optimized_libraries ; do
366        echo -en "."
367        reason=""
368        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
369        echo "$vanilla_lib_name" >> $filelist
370        LogFile "INFO: Adding $vanilla_lib_name to filelist"
371        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
372        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
373
374        # This may return multiple files
375        for resolved in `mr-read-all-link $vanilla_lib_name`; do
376            LogFile "INFO: Adding as deps $resolved to filelist"
377            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
378            if [ "$vanilla_resolved_name" != "$resolved" ]; then
379                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
380                rmdir $outdir$resolved > /dev/null 2> /dev/null
381                ln -sf $vanilla_resolved_name $outdir$resolved
382                LogFile "INFO: Excluding deps $resolved" 
383                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
384                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
385                echo "$vanilla_resolved_name" >> $filelist.tmp
386                mv -f $filelist.tmp $filelist
387            fi
388        done
389    done
390    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
391    mv -f $filelist.tmp $filelist
392    echo -e "$DONE"
393}
394
395
396FindAndAddUserKeyboardMappingFile() {
397    local r res mapfile mappath included_item included_list keyfile mp locale
398    LogAll "INFO: Analyzing your keyboard's configuration."
399    KEYDIR=/usr/lib/kbd
400    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
401    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
402    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
403    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
404    if [ ! -e "$KEYDIR" ] ; then
405        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
406        return 0
407    fi
408    if [ -e "/etc/sysconfig/keyboard" ] ; then
409        LogFile "INFO: Red Hat-style config detected."
410        keyfile=/etc/sysconfig/keyboard
411    elif [ -e "/etc/vconsole.conf" ] ; then
412        LogFile "INFO: New Fedora style config detected."
413        keyfile=/etc/vconsole.conf
414    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
415        LogFile "INFO: Slackware-style config detected."
416        keyfile=/etc/rc.d/rc.keymap
417    elif [ -e "/etc/rc.config" ] ; then
418        LogFile "INFO: Debian-style config detected."
419        keyfile=/etc/rc.config
420    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
421        LogFile "INFO: Debian-style config detected."
422        mkdir -p $bigdir/tmp
423        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
424        KBDEPTH=0
425        mkdir -p $bigdir/etc/console
426        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
427        echo ""
428        echo -e "$DONE"
429        return 0
430    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
431        LogFile "INFO: Ubuntu-style config detected."
432        mkdir -p $bigdir/tmp
433        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
434            kbdfile="/etc/console-setup/boottime.kmap.gz"
435        else
436            kbdfile="/etc/console-setup/cached.kmap.gz"
437        fi
438        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
439        KBDEPTH=0
440        mkdir -p $bigdir/etc/console-setup
441        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
442        echo ""
443        echo -e "$DONE"
444        return 0
445    elif [ -e "/etc/rc.conf" ] ; then
446        LogFile "INFO: ArchLinux config detected."
447        keyfile=/etc/rc.conf
448    elif [ -e "/etc/conf.d/keymaps" ] ; then
449        LogFile "INFO: Gentoo-style config detected."
450        keyfile=/etc/conf.d/keymaps
451    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
452        LogFile "INFO: X11-style config detected."
453        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
454    else
455        LogFile "Searching for rc.config ..."
456        keyfile=`find /etc -name rc.config | head -n1`
457        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
458            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
459            return
460        else
461            LogFile "INFO: Found $keyfile"
462        fi
463    fi
464    if [ ! -e "$KEYDIR/keymaps" ] ; then
465        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
466        return
467    fi
468    LogFile "INFO: keyfile=$keyfile"
469    # For SLES we need to remove the .map.gz extension Cf #614
470    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
471    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
472    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
473    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
474    LogFile "INFO: locale=$locale"
475    #
476    # Process the keymaps dir once for all
477    # AddKeyboardMappingFile will use it recursively
478    #
479    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
480    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
481    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
482    # If we have multiple keymaps then log it !!
483    echo "$mp" | grep -q " " >> $LOGFILE
484    if [ $? -eq 0 ]; then
485        LogAll "WARNING: Multiple keymaps found: $mp"
486        LogFile "INFO: The following one will be used"
487    fi
488    for i in $mp ; do
489        mappath=$i
490        [ -e "$i" ] && [ ! -d "$i" ] && break
491    done
492    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
493        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
494    fi
495    LogFile "INFO: mappath = $mappath"
496    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
497        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
498        return
499    fi
500    echo -en "INFO: Adding keyboard mapping tables"
501    mkdir -p $bigdir/tmp
502    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
503    KBDEPTH=0
504    AddKeyboardMappingFile $mappath
505    echo ""
506    echo -e "$DONE"
507    rm -f $MINDI_TMP/keymaps.find
508    return 0
509}
510
511
512FindLdlinux32Binary() {
513    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
514    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
515    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
517    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
518    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
519    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
520    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
521    if [ ! -e "$LDLINUXC32" ]; then 
522        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
523        LDLINUXC32=/tmp/idoesnthopefullyexist
524    else
525        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
526    fi
527}
528
529
530FindMboot32Binary() {
531    MBOOTC32=/usr/lib/syslinux/mboot.c32
532    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
533    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
536    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
537    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
538    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
539    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
540    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
541}
542
543FindLdlinuxe64Binary() {
544    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
545    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
546    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
548    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
549    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
550    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
551    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
552    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
553}
554
555FindSyslinux64EFI() {
556    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
557    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
558    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
560    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
561    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
562    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
563    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
564    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
565}
566
567FindIsolinuxBinary() {
568    ISOLINUX=/usr/lib/isolinux.bin
569    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
570    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
573    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
574    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
575    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
576    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
577    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
578}
579
580
581GenerateGiantDependencyList() {
582    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
583
584    echo -en "INFO: Analyzing dependency requirements"
585    outfile=$1
586    tempfile=$MINDI_TMP/$$.txt
587    incoming=`ReadLine`
588
589    > $tempfile
590    progress=0
591    res=0
592    noof_lines=$2
593    while [ "$incoming" != "" ] ; do
594        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
595            incoming=`ReadLine`
596            continue
597        fi
598        if [ "$incoming" = "LVMFILES:" ] ; then
599            break
600        fi
601        filelist=`GenerateListForFile "$incoming"`
602        r=$?
603        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
604        res=$(($res+$r))
605#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
606        for fname in $filelist ; do
607            [ "$fname" != "" ] && echo "$fname" >> $tempfile
608        done
609        progress=$(($progress+1))
610        LogProgress $progress $noof_lines
611        incoming=`ReadLine`
612    done
613    if  [ "$incoming" = "LVMFILES:" ] ; then
614        incoming=`ReadLine`
615        lvmversion=""
616        while [ "$incoming" != "" ] ; do
617            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
618                incoming=`ReadLine`
619                continue
620            fi
621            filelist=`GenerateListForFile "$incoming"`
622            for tool in $filelist ; do
623                lvmresolved=`readlink -f $tool`
624                if [ "$tool" = "$lvmresolved" ]; then
625                    echo "$tool" >> $tempfile
626                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
627                    if [ "$lvmversion" = "" ] ; then
628                        lvmversion=`$lvmresolved`
629                        echo "$lvmresolved" >> $tempfile
630                    fi
631                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
632                    if [ "$lvmversion" = "200" ]; then
633                        # pvdata and lvmcreate_initrd don't exist in LVM2
634                        case "$toolstripped" in
635                        "pvdata")
636                            continue
637                            ;;
638                        "lvmcreate_initrd")
639                            continue
640                            ;;
641                        esac
642                    fi
643                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
644                    if [ -e "$toolpath" ] ; then
645                        echo "$toolpath" >> $tempfile
646                        echo "$tool" >> $tempfile
647                    else
648                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
649                    fi
650                    if [ -e "$toolpath" ] ; then
651                        echo "$toolpath" >> $tempfile
652                        echo "$tool" >> $tempfile
653                    else
654                        echo "Where are your LVM-Tools? Couldn't find $tool"
655                    fi
656                else
657                    echo "$tool" >> $tempfile
658                fi
659            done
660            progress=$(($progress+1))
661            LogProgress $progress $noof_lines
662            incoming=`ReadLine`
663        done
664    fi
665    echo -en "$DONE\nINFO: Making complete dependency list"
666
667    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
668    mv -f $tempfile.new $tempfile
669    > $outfile.pre
670    progress=0
671    noof_lines=`cat $tempfile | wc -l`
672    LogFile "---------------------------------"
673    LogFile "List of dependencies:             "
674    LogFile "---------------------------------"
675    for fname in `cat $tempfile` ; do
676        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
677        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
678        progress=$(($progress+1))
679        LogProgress $progress $noof_lines
680    done
681    if [ _"$MONDO_SHARE" != _"" ]; then
682        mkdir -p $bigdir/tmp
683        mkdir -p $bigdir/usr/bin
684        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
685            LogAll "\nINFO: Incorporating post-nuke tarball"
686            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
687        fi
688        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
689            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
690        else
691            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
692            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
693            LogIt "       If Mindi was called by Mondo then send a bug report."
694            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
695            LogIt "       Finally, run Mindi again."
696            Die "Odd."
697        fi
698        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
699        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
700            LogAll "\nINFO: Incorporating Network-related settings"
701            for r in NETFS-* ; do
702                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
703                LogFile "INFO: Copying $r to ramdisk"
704            done
705        fi
706    fi
707    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
708    rm -f $tempfile $outfile.pre
709    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
710    return $res
711}
712
713
714GenerateListForFile() {
715    local files_found loc fname incoming i res
716    incoming="$1"
717    files_found=""
718    res=0
719
720    for fname in $incoming ; do
721        files_found="$files_found `LocateFile $fname`"
722    done
723
724    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
725}
726
727
728# Returns all disk devices which are part of a raid array
729GetAllRaidMembers() {
730    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
731}
732
733
734GetFileSizeList() {
735    local i
736    for i in `find $1 -type d -o -print` ; do
737        du -sk $i
738    done
739}
740
741
742# Check kernel filesystem capabilites for accessing initrd image
743# Could be ext2 FS (old mode) or initramfs (new mode)
744#
745# Interface definition:
746# param #1: absolute path to kernel image
747GetInitrdFilesystemToUse() {
748
749    # interface test: make sure we have one parameter
750    if [ $# -ne 1 ]; then
751        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
752    fi
753
754    # interface parameters
755    local lvKernelImage=$1
756
757    # local constants (filesystem magic strings)
758    local lcMagicCramfs="<3>cramfs: wrong magic"
759    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
760    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
761    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
762
763    # local variables
764    local lvOffset
765    local lvScanRes
766    local lvUseFilesystem
767
768    # say where we are.
769    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
770
771    # verify that file exists
772    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
773
774    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
775    file $lvKernelImage 2>&1 | grep -q gzip
776    if [ $? -eq 0 ]; then
777        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
778        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
779    else
780        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
781        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
782        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
783        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
784        if [ $lvOffset -eq 0 ]; then
785            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
786            lvScanRes=$lcMagicInitfs
787        else
788            lvOffset=`expr $lvOffset / 2`
789            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
790            # scan again  kernel image
791            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
792        fi
793    fi
794
795    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
796    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
797        lvUseFilesystem="ext2fs"
798    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
799        lvUseFilesystem="ext3fs"
800    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
801        lvUseFilesystem="initramfs"
802    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
803        lvUseFilesystem="cramfs"
804    else
805        # In that case, we are most probably after 2.6.30 and use the supported initramfs
806        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
807        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
808        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
809        lvUseFilesystem="initramfs"
810    fi
811
812    # say what we are using
813    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
814
815    # return file system to use
816    echo "$lvUseFilesystem"
817
818}
819
820# Searches members of raid device
821# $1: raid device (/dev/md...)
822GetRaidDevMembers() {
823    if [ ! -f /etc/raidtab ]; then 
824        return
825    fi
826    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
827}
828
829
830ListAllPartitions() {
831    local res currline partition all_partitions ap_orig remaining i j
832
833    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
834    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
835    if [ -e "/vmfs/volumes" ]; then
836        # For VMWare ESX 3 get the device names of these volumes
837        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
838    fi
839    return
840}
841
842
843ListKernelModulePaths() {
844    local module_list module fname r kern
845    module_list="$MODULES"
846    # Remove unwanted modules from list
847    for i in $DENY_MODS; do
848        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
849    done
850###
851### Sq-Modification ... Use kernelname for module search path if specified
852###
853    if [ "${kernelname}" != "" ]
854    then
855        kern=${kernelname}
856    else
857        kern="$KERVERRUN"
858    fi
859    export KERVER=$kern
860###
861### Sq-Mod End
862###
863    # Get rid of duplicates
864    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
865        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
866        if [ -z "$r" ]; then
867            if [ "`echo "$MODULES" | grep -w $module`" ]; then
868                r="[live module file not found]"
869            else
870                r="[extra module file not found]"
871            fi
872        else
873            [ -f "$r" ] && echo "$r"
874        fi
875        LogFile "INFO: module $module --> $r"
876    done
877    find /lib/modules/$kern/modules.* -type f 2> /dev/null
878}
879
880#
881# Critical function which computes all dependencies (dyn. lib.)
882# for a list of binaries
883#
884LocateDeps() {
885    local incoming fname deps
886    incoming="$*"
887    deps=""
888
889    for fname in $incoming ; do
890        if [ ! -e "$fname" ] ; then
891            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
892            if echo $fname | grep lvm &> /dev/null ; then
893                LogFile "          This warning only affects you if you are using LVM."
894                if echo "$MODULES" | grep lvm &> /dev/null ; then
895                    LogFile "          I think you are, so please take heed!"
896                else
897                    LogFile "          I don't think you are, so don't worry about it."
898                fi
899            fi
900        else
901            deps="$deps $fname" 
902        fi
903    done
904    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
905}
906
907
908LocateFile() {
909    local i j path fname_to_find location output resolved tmp stub cache_id loclist
910    fname_to_find="$1"
911    # It's an absolute path
912    j=`echo "$fname_to_find" | cut -c1`
913    if [ _"$j" = _"/" ]; then
914        dn=`dirname $fname_to_find`
915        # We suppose that the link is already included, just add the new file
916        if [ -h "$dn" ]; then
917            newdn=`readlink -f $dn`
918            bn=`basename $fname_to_find`
919            output="$newdn/$bn"
920        else
921            output="$fname_to_find"
922        fi
923        if [ -h "$output" ] ; then
924            output="`mr-read-all-link $output` $output"
925        fi
926        echo "$output"
927        return 0
928    fi
929    # It's not an absolute path
930    output=""
931    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
932    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
933        [ -h "$path" ] && continue
934        [ ! -e "$path/$fname_to_find" ] && continue
935        output="$path/$fname_to_find $output"
936        if [ -h "$path/$fname_to_find" ] ; then
937            output="`mr-read-all-link $path/$fname_to_find` $output"
938        fi
939    done
940    if [ "$output" = "" ] ; then
941        return 1
942    fi
943    echo "$output"
944    return 0
945}
946
947LogProgress() {
948    local i progress modres noof_lines title
949 
950    progress=$1
951    noof_lines=$2
952    title=$3
953
954    i=$(($progress*100))
955    if [ $noof_lines -ne 0 ]; then
956        i=$(($i/$noof_lines))
957    else
958        i=0
959    fi
960
961    if [ _"$MONDO_SHARE" != _"" ]; then 
962        echo "$title        $i%"
963    else
964        echo -en "\r\t\t\t\t\t\t\t\t"
965        echo -en "$i"
966        echo -en "%"
967        modres=$(($progress%4))
968        [ "$modres" -eq "0" ] && echo -en "\t/"
969        [ "$modres" -eq "1" ] && echo -en "\t-"
970        [ "$modres" -eq "2" ] && echo -en "\t\\"
971        [ "$modres" -eq "3" ] && echo -en "\t|"
972    fi
973}
974
975# Called by MakeBootInitFile, to make /tmp/$MRCFG
976MakeMondoConfigFile() {
977    local outfile use_lzo use_comp use_star
978    outfile=$1
979    > $outfile
980    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
981    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
982    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
983    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
984    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
985    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
986    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
987    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
988    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
989    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
990    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
991    echo "use-lzo $use_lzo" >> $outfile
992    echo "use-gzip $use_gzip" >> $outfile
993    echo "use-star $use_star" >> $outfile
994    echo "use-lzma $use_lzma" >> $outfile
995    echo "use-comp $use_comp" >> $outfile
996    echo "boot-type $BOOT_TYPE" >> $outfile
997    echo "datestamp `date`" >> $outfile
998    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1012
1013    # Deal with network configuration in a portable way
1014    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1015        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1016    fi
1017}
1018
1019# Get PV's for an LV
1020GetPVsForLV() {
1021    if [ -n "$1" ]; then
1022        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1023        if [ -z "$vg" ]; then
1024            return
1025        fi
1026        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1027    fi
1028}
1029
1030
1031MakeMountlist() {
1032    local mountlist all_partitions current_partition \
1033partition_size partition_format outstring partition_number \
1034partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1035absolute_partition old_partition_fmt current_lvolume uname skip
1036
1037    LogFile "------------------------------------"
1038    LogFile "INFO: Your raw fstab file looks like this:"
1039    LogFile "------------------------------------"
1040    cat $MY_FSTAB >> $LOGFILE
1041    LogAll "-----------------------------------"
1042    LogAll "INFO: Your mountlist will look like this:"
1043    LogAll "-----------------------------------"
1044
1045# mountlist(OUT)
1046    mountlist=$1
1047
1048# NB: partition = device
1049# NB: mountpt = where the device is mounted
1050
1051    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1052
1053    [ "$mountlist" != "" ] && rm -Rf $mountlist
1054    > $mountlist
1055    all_partitions=""
1056   
1057    if [ $LVM != "false" ]; then
1058        LogFile "INFO: Analyzing LVM..."
1059        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1060        if [ $? -ne 0 ]; then
1061            LVM="false"
1062        fi
1063        # Excluded LVs and GVs are not reported here
1064        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1065    fi
1066    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1067    for i in $IMAGE_DEVS ; do
1068        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1069    done
1070    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1071    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1072    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1073    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1074    for c_p in $all_partitions ; do
1075        # Skip fd/cd devices, network FS, cifs
1076        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1077        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1078        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1079            current_partition=`readlink -f $c_p`
1080            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1081                current_partition="$c_p"
1082            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1083                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1084                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1085            fi
1086            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1087        else
1088            current_partition="$c_p"
1089        fi
1090        [ "$c_p" = "none" ] && continue
1091        redhat_label=""
1092        label=""
1093        uuid=""
1094        absolute_partition=`readlink -f $c_p`
1095        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1096
1097        # set default in case we dont't find it
1098        str_to_find_fmt_with=$current_partition
1099
1100        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1101        # current_partition contains only first column of /etc/fstab
1102        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1103            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1104            actual_dev=""
1105
1106            # 1st try, findfs - the RHEL way of finding labels and their partitions
1107            if [ -x "/sbin/findfs" ]; then
1108                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1109            fi
1110   
1111            # 2nd try : blkid, the good way for all LABEL except swap
1112            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1113                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1114                # For LVM FS it will give a /dev/dm-# which should then be converted
1115                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1116                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1117                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1118                    for dev in `ls /dev/mapper/*`; do
1119                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1120                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1121                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1122                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1123                            break
1124                        fi
1125                    done
1126                fi
1127            fi
1128   
1129            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1130            # For LVM gives a /dev/mapper entry
1131            if [ "x$actual_dev" = "x" ]; then
1132                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1133            fi
1134   
1135            # 4th try, with vol_id
1136            # SWAP only
1137            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1138                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1139                for dev_swap in $list_swaps ; do
1140                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1141                    if [ "x$dev_exists" != "x" ]; then
1142                        actual_dev=$dev_swap
1143                        break;
1144                    fi
1145                done
1146            fi
1147
1148            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1149            # LABEL=SW-cciss/c0d0p3 (RDP)
1150            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1151            # SWAP only
1152            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1153                    skip=""
1154                    uname=$KERVERRUN
1155                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1156                    # 2.6.12 needs 16 (FC3)
1157                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1158                    # 2.6.19 and upper needs 1052
1159                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1160                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1161                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1162                    if [ $skip = "" ]; then
1163                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1164                    fi
1165                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1166                    do
1167                        # Location of the swap label for kernel 2.6
1168                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1169                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1170                            actual_dev=$try_dev
1171                        fi
1172                    done
1173            fi
1174
1175            # Check if one of all those tries has known success
1176            if [ "x$actual_dev" != "x" ]; then
1177                current_partition=$actual_dev
1178            else
1179                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1180            fi
1181        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1182        # current_partition contains only first column of /etc/fstab
1183        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1184            uuid=`echo "$current_partition" | cut -d'=' -f2`
1185            actual_dev=""
1186
1187            # 1st try, findfs - the RHEL way of finding labels and their partitions
1188            if [ -x "/sbin/findfs" ]; then
1189                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1190            fi
1191   
1192            # 2nd try : blkid, the good way for all UUID except swap
1193            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1194                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1195                # For LVM FS it will give a /dev/dm-# which should then be converted
1196                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1197                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1198                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1199                    for dev in `ls /dev/mapper/*`; do
1200                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1201                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1202                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1203                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1204                            break
1205                        fi
1206                    done
1207                fi
1208            fi
1209   
1210            # 3th try, with vol_id
1211            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1212                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1213                for dev in $list_dev ; do
1214                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1215                    if [ "x$dev_exists" != "x" ]; then
1216                        actual_dev=$dev
1217                        break;
1218                    fi
1219                done
1220            fi
1221
1222            # 4th try, with dumpuuid (VMWare only ?) for swap
1223            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1224                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1225                for dev in $list_dev ; do
1226                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1227                    if [ "x$dev_exists" != "x" ]; then
1228                        actual_dev=$dev
1229                        break;
1230                    fi
1231                done
1232            fi
1233
1234            # Check if one of all those tries has known success
1235            if [ "x$actual_dev" != "x" ]; then
1236                current_partition=$actual_dev
1237            else
1238                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1239            fi
1240        else
1241            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1242            # they use symlinks in fstab unrelated to what is shown in mount !
1243            if [ _"$partition_mountpt" = _"" ]; then
1244                # set default in case we dont't find it
1245                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1246                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1247                            str_to_find_fmt_with=$tmpp
1248                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1249                            break;
1250                        fi
1251                done
1252            fi
1253        fi
1254
1255        # Detects noauto partitions not mounted and exclude them
1256        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1257        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1258                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1259            continue
1260        fi
1261        # Detects bind partitions and exclude them
1262        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1263                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1264            continue
1265        fi
1266
1267        # Look for devices which have to be excluded
1268        skip=0
1269        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1270            l=""
1271            list_of_devices="`mr-read-all-link $current_partition`"
1272            for d in $list_of_devices; do
1273                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1274            done
1275
1276            # Remove PVs from LVs excluded
1277            l="$l `GetPVsForLV $current_partition`"
1278
1279            # We want a single unique list
1280            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1281
1282            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1283                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1284                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1285                    skip=1
1286                    continue
1287                fi
1288            done
1289        fi
1290        if [ $skip -eq 1 ]; then
1291            continue
1292        fi
1293
1294        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1295        # Detects iso9660 ISO images and exclude them
1296        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1297                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1298            continue
1299        fi
1300        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1301        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1302        # the former is then a link to the latter, so we test whether
1303        # $current_partition is actually such a link or not and set
1304        # $current_lvolume accordingly. On Debian you may find more than one answer
1305        # so we remove the one corresponding to /dev/.static
1306        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1307        # principle is the same and we need to find the link to it as well.
1308        # Note that $current_lvolume may well be an
1309        # ordinary device. It is just to make sure that we feed the right value
1310        # into any of the LVM tools if possible.
1311
1312        current_lvolume="$current_partition"
1313        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1314            # .static dir are a Debian specificity
1315            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1316            echo $current_lvolume | grep -q ' '
1317            if [ $? -eq 0 ]; then
1318                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1319            fi
1320            # if it's not found, it may well be a real device such as a multipath one
1321            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1322            if [ _"$current_lvolume" = _"" ]; then
1323                current_lvolume="$current_partition"
1324            fi
1325        fi
1326        #
1327        # End of LVM device style variation code (other than $current_lvolume).
1328
1329        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1330            # Size computed via LVM not directly
1331            partition_size="lvm"
1332        else
1333            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1334            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1335            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1336                # Skip swap files
1337                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1338                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1339                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1340                [ "$partition_format" != "swap" ] && partition_format="swap"
1341                if [ "$partition_size" = "" ] ; then
1342                    totalsize=0
1343                    items=0
1344                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1345                        totalsize=$(($totalsize+$i))
1346                        items=$(($items+1))
1347                    done
1348                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1349                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1350                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1351                fi
1352            else
1353                partition_size=`SizeOfPartition $current_partition`
1354            fi
1355        fi
1356        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1357        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1358        if [ "$partition_mountpt" = "" ] ; then
1359            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1360                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1361                    partition_mountpt="raid"
1362                    partition_format="raid"
1363                else
1364                    partition_mountpt="lvm"
1365                    partition_format="lvm"
1366                fi
1367            fi
1368        fi
1369        psz=$partition_size
1370        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1371        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1372        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1373            partition_mountpt="image"
1374            old_partition_fmt=$partition_format
1375            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1376            partition_size=$(($partition_size+1)); # just in case
1377            if [ "$partition_format" = "Linux" ] ; then
1378                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1379                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1380                partition_format=$old_partition_fmt
1381            fi
1382        fi
1383
1384        if [ ! "$partition_mountpt" ] ; then
1385            LogFile "------- $FDISK -l $qq log ------------"
1386            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1387                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1388                [ "$partition_format" ] && break
1389            done
1390            LogFile "------- $FDISK log end ------------"
1391            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1392                partition_format="compaq"
1393            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1394                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1395                continue
1396            fi
1397        fi
1398        if [ "$redhat_label" ]; then
1399            label="$redhat_label"
1400        elif [ "$uuid" ]; then
1401            label="$uuid"
1402        fi
1403
1404        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1405        # in order to mount the root part e.g. in grub.
1406        # One way to solve this is to add the UUID now, if there wasn't one so it's
1407        # restored correctly
1408        if [ _"$label" = _"" ]; then
1409            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1410        fi
1411
1412        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1413        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1414        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1415        if [ "$current_partition" = "" ] ; then
1416            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1417        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1418            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1419                partition_mountpt=raid
1420                partition_format=raid
1421                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1422                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1423            else
1424                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1425            fi
1426        elif [ "$partition_format" = "" ] ; then
1427            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1428        elif [ "$partition_size" = "" ] ; then
1429            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1430        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1431            continue
1432        else
1433            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1434            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1435                partition_format="vfat"
1436            fi
1437            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1438            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1439        fi
1440    done
1441    LogAll "-----------------------------------" 
1442}
1443
1444CheckMountlist() {
1445    local file=$1
1446    # Coherency verification
1447    ML01=`cat $file | wc -l`
1448    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1449    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1450    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1451    if [ "$ML01" -ne "$ML1" ]; then
1452        LogFile "--------------------------------------------"
1453        LogAll "WARNING: Duplicate device entry in mountlist"
1454        LogFile "--------------------------------------------"
1455    fi
1456    if [ "$ML02" -ne "$ML2" ]; then
1457        LogFile "--------------------------------------------"
1458        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1459        LogFile "------------------------------------------------"
1460    fi
1461}
1462
1463
1464MakeISOErrors() {
1465
1466LogFile "----------- $ISO_CMD's errors --------------"
1467LogAll "$ISO_CMD returned the following errors:"
1468cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1469LogAll "ERROR: Failed to create ISO image."
1470}
1471
1472MakeISO() {
1473
1474LogAll "INFO: Invoking $CMD ."
1475(cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1476if [ $? -ne 0 ] ; then
1477    if [ "$BOOT_TYPE" = "UEFI" ]; then
1478        CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1479        LogAll "INFO: Invoking instead $CMD"
1480        (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1481        if [ $? -eq 0 ] ; then
1482            LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1483        else
1484            MakeISOErrors
1485        fi
1486    else
1487        MakeISOErrors
1488    fi
1489else
1490    LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1491fi
1492rm -f $MINDI_TMP/mkisofs.log
1493}
1494
1495MakeBootableDevice() {
1496
1497local target tbc retval part size mount_opt
1498
1499target="$1"
1500
1501rm -Rf $MINDI_TMP/target
1502mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1503
1504LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1505cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1506for i in memdisk memtest.bin memtest.img ; do
1507    j=$MINDI_LIB/$i
1508    k=$MINDI_TMP/target
1509    if [ -e "$j" ] ; then
1510        LogAll "INFO: Copying $j to $k"
1511        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1512        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1513        if [ _"$MONDO_SHARE" != _"" ]; then 
1514            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1515        fi
1516    fi
1517done
1518
1519retval=0
1520LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1521cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1522if [ $? -ne 0 ] ; then
1523    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1524    retval=$(($retval+1))
1525fi
1526LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1527cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1528if [ $? -ne 0 ] ; then
1529    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1530    retval=$(($retval+1))
1531fi
1532
1533# copy boot stuff now generated in PrepareDataDiskImage
1534if [ "$BOOT_TYPE" = "UEFI" ]; then
1535    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1536    tbc="EFI"
1537    # Also prepare a BIOS compatible boot
1538    if  [ "$target" = "ISO" ]; then
1539        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1540    fi
1541else
1542    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1543    tbc="syslinux"
1544    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1545        LogFile "----------- syslinux's conf --------------"
1546        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1547        LogFile "------------------------------------------"
1548    fi
1549    if  [ "$target" = "ISO" ]; then
1550        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1551        if [ $? -ne 0 ] ; then
1552            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1553            retval=$(($retval+1))
1554        fi
1555    fi
1556fi
1557
1558if [ "$ARCH" != "ia64" ] ; then
1559    if [ $KERNEL_IS_XEN = "yes" ]; then
1560        FindMboot32Binary
1561        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1562        if [ $? -ne 0 ] ; then
1563            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1564            retval=$(($retval+1))
1565        fi
1566        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1567        if [ $? -ne 0 ] ; then
1568            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1569            retval=$(($retval+1))
1570        fi
1571    fi
1572fi
1573
1574MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1575
1576if [ _"$MONDO_SHARE" != _"" ]; then 
1577    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1578    if [ $? -ne 0 ] ; then
1579        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1580        LogAll "       Please check the target directory."
1581        retval=$(($retval+1))
1582    fi
1583    if [ $KERNEL_IS_XEN = "yes" ]; then
1584        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1585        if [ $? -ne 0 ] ; then
1586            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1587            LogAll "       Please check the target directory."
1588            retval=$(($retval+1))
1589        fi
1590    fi
1591    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1592    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1593    if [ $? -ne 0 ] ; then
1594        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1595        LogAll "       Please check the target directory."
1596        retval=$(($retval+1))
1597    fi
1598    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1599    if [ $? -ne 0 ] ; then
1600        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1601        LogAll "       Please check the target directory."
1602        retval=$(($retval+1))
1603    fi
1604fi
1605
1606if [ -f "$MINDI_TMP/$MRCFG" ]; then
1607    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1608fi
1609
1610LogFile "----------- target dir content -----------"
1611LogFile "------------------------------------------"
1612ls -lR $MINDI_TMP/target >> $LOGFILE
1613LogFile "------------------------------------------"
1614LogFile "----------- target dir sizes -------------"
1615du -sk $MINDI_TMP/target/* >> $LOGFILE
1616LogFile "------------------------------------------"
1617
1618if [ "$retval" -ne "0" ] ; then
1619    LogFile "--------------------------------"
1620    LogFile "INFO: Size of $MINDI_TMP/target:"
1621    du -sk $MINDI_TMP/target/* >> $LOGFILE
1622    LogFile "--------------------------------"
1623    echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1624    umount $MINDI_TMP/target
1625    LogAll "ERROR: Problems while creating boot media."
1626    LogAll "       Please unload some of your modules and try again."
1627    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1628fi
1629
1630mkdir -p $MINDI_TMP/mpt
1631
1632if  [ "$target" = "USB" ]; then
1633    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1634    LogAll "INFO: Checking $USBDEVICE"
1635    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1636    if [ $? -ne 0 ]; then
1637        LogAll "ERROR: Unable to access $USBDEVICE"
1638        LogAll "       Make sure your USB device is plugged in"
1639        MindiExit -1
1640    fi
1641    # Some distro do auto mount at that point (Ubuntu)
1642    LogAll "INFO: Unmounting $USBPART just in case"
1643    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1644    if [ "$BOOT_TYPE" = "BIOS" ]; then
1645        # If your key has no MBR it may cause an issue
1646        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1647        if [ -r $MBRFILE ]; then
1648            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1649            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1650        else
1651            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1652            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1653        fi
1654    fi
1655    LogAll "INFO: Preparing $USBDEVICE"
1656    cat > $MINDI_TMP/fdisk.txt << EOF
1657d
1658d
1659d
1660d
1661n
1662p
16631
1664
1665
1666t
1667b
1668a
16691
1670w
1671EOF
1672    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1673    if [ $? -ne 0 ]; then
1674        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1675        LogAll "       Make sure your USB device is plugged in"
1676        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1677        MindiExit -1
1678    fi
1679    LogFile "fdisk build file"
1680    LogFile "----------------"
1681    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1682    LogFile "----------------"
1683    rm -f $MINDI_TMP/fdisk.txt
1684    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1685    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1686    # Calling kpartx in case devices were not created
1687    if [ -x "/sbin/kpartx" ]; then
1688        /sbin/kpartx -a $USBDEVICE
1689    fi
1690    # Some distro do auto mount at that point (Ubuntu)
1691    LogAll "INFO: Unmounting $USBPART just in case again"
1692    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1693    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1694    if [ "`which dmsetup`" != "" ]; then
1695        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1696        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1697            LogAll "INFO: Removing $block_id from device mapper."
1698            sleep 1
1699            dmsetup remove $block_id
1700        fi
1701    fi
1702    part=$USBPART
1703    mount_opt=""
1704else
1705    # ISO image
1706    part=$MINDI_TMP/mindi-bootroot.img
1707    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1708    # Adds 10 MB to allow for additional space
1709    size=$(($size+10000))
1710    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1711    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1712    mount_opt="-o loop"
1713fi
1714
1715LogAll "INFO: Creating a vfat filesystem on $part"
1716
1717mkfs.vfat $part 2>&1 >> $LOGFILE
1718if [ $? -ne 0 ]; then
1719    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1720    if  [ "$target" = "USB" ]; then
1721        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1722        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1723    fi
1724    MindiExit -1
1725fi
1726if  [ "$target" = "ISO" ]; then
1727    if [ "$BOOT_TYPE" = "BIOS" ]; then
1728        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1729        # and run after the formating for versions > 6 it seems
1730        syslinux $part >> $LOGFILE 2>> $LOGFILE
1731    fi
1732fi
1733LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1734mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1735if [ $? -ne 0 ]; then
1736    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1737    if  [ "$target" = "USB" ]; then
1738        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1739        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1740    fi
1741    MindiExit -1
1742fi
1743
1744LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1745mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1746if [ $? -ne 0 ] ; then
1747    LogFile "--------------------------------"
1748    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1749    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1750    LogFile "--------------------------------"
1751    umount $MINDI_TMP/mpt
1752    LogAll "ERROR: Problems while creating boot media."
1753    LogAll "       Please unload some of your modules and try again."
1754    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1755fi
1756
1757if  [ "$target" = "ISO" ]; then
1758    if [ "$ARCH" != "ia64" ]; then
1759        ISO_OPT="$ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1760    fi
1761    # ISO
1762    if [ "$ARCH" != "ia64" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
1763        CMD="$ISO_CMD $ISO_OPT"
1764        MakeISO
1765    else
1766        if [ "$ARCH" = "ia64" ]; then
1767            CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1768        else
1769            # UEFI
1770            echo "$CMD" | grep -q "xorriso"
1771            if [ $? -eq 0 ]; then
1772                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
1773            else
1774                CMD="$ISO_CMD $ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1775            fi
1776        fi
1777    fi
1778fi
1779
1780umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1781
1782if  [ "$target" = "ISO" ]; then
1783    cp $part $MINDI_CACHE
1784    if [ "$ARCH" = "ia64" ] || [ "$BOOT_TYPE" = "UEFI" ]; then
1785        # We just need the EFI dir and the boot image for this case
1786        mkdir -p $MINDI_TMP/mpt2 $MINDI_TMP/mpt/images $MINDI_TMP/mpt/archives
1787        mount -o loop $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt2 2>> $LOGFILE
1788        # We need again the kernel+initrd at the root for UEFI boot at least
1789        cp -a $MINDI_TMP/mpt2/EFI $MINDI_TMP/mpt2/vmlinuz $MINDI_TMP/mpt2/initrd.img $MINDI_TMP/mpt
1790        # We need the boot image now and what mindi needs at restore time as well
1791        cp -a $MINDI_TMP/mpt2/images/all.tar.gz $MINDI_CACHE/mindi-bootroot.img $MINDI_TMP/mpt/images
1792        umount $MINDI_TMP/mpt2
1793        LogFile "----------- target dir content -----------"
1794        LogFile "------------------------------------------"
1795        ls -lR $MINDI_TMP/mpt >> $LOGFILE
1796        LogFile "------------------------------------------"
1797        MakeISO
1798    fi
1799else
1800    # USB
1801    if [ "$ARCH" != "ia64" ] ; then
1802        syslinux -v 2>&1 | grep -q 4.02
1803        if [ $? -eq 0 ]; then
1804            # This buggy version of syslinux requires a call to --stupid and not -s
1805            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1806            res=$?
1807        else
1808            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1809            res=$?
1810        fi
1811        if [ $res -ne 0 ] ; then
1812            LogAll "----------- syslinux's errors --------------"
1813            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1814            LogAll "------------------------------------------"
1815            LogIt "ERROR: Failed to create USB image."
1816        else
1817            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1818        fi
1819        rm -f $MINDI_TMP/syslinux.log
1820    else
1821        LogAll "ERROR: No USB boot support for ia64"
1822        MindiExit -1
1823    fi
1824fi
1825}
1826
1827
1828OfferToMakeBootableUSB() {
1829
1830local i files
1831
1832if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1833    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1834    read i
1835    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1836    if [ "$USBDEVICE" = "" ]; then
1837        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1838        read dev
1839        USBDEVICE=$dev
1840    fi
1841    echo "WARNING: This will erase all content on $USBDEVICE"
1842    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1843    read i
1844    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1845else
1846    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1847        Die "No USBDEVICE environment variable declared, aborting"
1848    fi
1849fi
1850USBPART="${USBDEVICE}1"
1851
1852MakeBootableDevice USB
1853}
1854
1855
1856OfferToMakeBootableISO() {
1857
1858local i files
1859
1860if [ -z "$ISO_CMD" ]; then
1861    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1862    return
1863fi
1864
1865if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1866    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1867    read i
1868    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1869fi
1870
1871MakeBootableDevice ISO
1872
1873}
1874
1875
1876MakeMessageFile() {
1877   
1878    if [ -x "/bin/lsb_release" ]; then
1879        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1880    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1881        DESC="Arch Linux"
1882        if [ -r /var/log/pacman.log ]; then
1883            # there are no releases but we can get the last system upgrade
1884            # Output example:   Arch Linux [2011-03-03 01:39]
1885            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1886        fi
1887    elif [ -x "/etc/os-release" ]; then
1888        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1889    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1890        # For pb >= 0.9.8
1891        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1892    elif [ -r /etc/issue.net ]; then
1893        DESC=`head -1 /etc/issue.net`
1894    elif [ -r /etc/issue ]; then
1895        DESC=`head -1 /etc/issue`
1896    else
1897        DESC="Unknown desc"
1898    fi
1899    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1900    if [ _"$MONDO_SHARE" != _"" ]; then
1901        if [ "$CDRECOVERY" != "yes" ] ; then
1902            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1903                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1904                echo -en "$BOOT_MEDIA_MESSAGE"
1905            elif [ ! "$MINDI_TMP" ] ; then
1906                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1907                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1908                    echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1909                fi
1910            else
1911                echo -en "$BOOT_MEDIA_MESSAGE"
1912            fi
1913        else
1914            echo -en "\
1915To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1916CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1917        fi
1918    fi
1919
1920    # Also create the other help screens
1921    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1922    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1923    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1924}
1925
1926
1927MakeBootConfFile() {
1928    local options i ooo
1929    options=""
1930    # Type of boot file (elilo or syslinux/isolinux)
1931    type=$1
1932    if [ "$type" = "elilo" ]; then
1933        sep="="
1934        sepdef="="
1935    else
1936        sep=" "
1937        sepdef=" "
1938        if [ "$type" = "grub" ]; then
1939            sepdef="="
1940        fi
1941    fi
1942
1943    # Generic header for conf file
1944    if [ "$type" = "elilo" ]; then
1945        echo -en "prompt\n"
1946    elif [ "$type" = "grub" ]; then
1947        echo -en "pause Press a key when ready to restore\n"
1948    elif [ "$type" = "grub2" ]; then
1949        echo -en "set "
1950    else
1951        # syslinux family
1952        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1953    fi
1954
1955    # Compute which default option to boot from
1956    echo -en "default${sepdef}"
1957    if [ "$CDRECOVERY" = "yes" ] ; then
1958        if [ "$type" = "grub" ]; then
1959            # TODO: Which num ???
1960            echo -en "0\n"
1961        else
1962            echo -en "RESTORE\n"
1963        fi
1964    # In case it's mondoarchive
1965    elif [ _"$MONDO_SHARE" != _"" ]; then
1966        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1967            if [ "$type" = "grub" ]; then
1968                echo -en "3\n"
1969            else
1970                echo -en "iso\n"
1971            fi
1972        else
1973            if [ "$type" = "grub" ]; then
1974                echo -en "1\n"
1975            else
1976                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1977            fi
1978        fi
1979    else
1980        if [ "$type" = "grub" ]; then
1981            echo -en "0\n"
1982        else
1983            echo -en "expert\n"
1984        fi
1985    fi
1986
1987    # Handle timeout
1988    if [ "$type" = "grub" ]; then
1989        sep='='
1990    fi
1991    if [ "$CDRECOVERY" != "yes" ] ; then
1992        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1993    else
1994        echo -en "timeout${sep}10000\n"
1995    fi
1996    echo -en "\n"
1997
1998    # prepare which labels will be generated
1999    if [ "$CDRECOVERY" = "yes" ] ; then
2000        options="RESTORE expert"
2001    else
2002        if [ _"$MONDO_SHARE" != _"" ]; then
2003            options="interactive expert compare iso nuke isonuke"
2004        else
2005            options="expert"
2006        fi
2007    fi
2008
2009    # Generate rest of conf file
2010    for i in $options ; do
2011        ooo=$i
2012        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
2013        if [ "$type" = "elilo" ]; then
2014            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
2015        elif [ "$type" = "grub" ]; then
2016            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
2017        elif [ "$type" = "grub2" ]; then
2018            if [ "$BOOT_TYPE" = "UEFI" ]; then
2019                lorder="linuxefi"
2020                iorder="initrdefi"
2021            else
2022                lorder="linux"
2023                iorder="initrd"
2024            fi
2025            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\t$lorder /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\t$iorder /initrd.img\n}\n"
2026        else
2027            ps="/"
2028            if [ $KERNEL_IS_XEN = "no" ]; then
2029                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
2030            else
2031                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
2032            fi
2033        fi
2034        echo -en "$outstr"
2035    done
2036    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2037        if [ "$type" = "elilo" ]; then
2038            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2039            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2040        elif [ "$type" = "grub" ]; then
2041            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2042        elif [ "$type" = "grub2" ]; then
2043            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2044        else
2045            ps="/"
2046            if [ "$type" = "syslinux" ]; then
2047                ps=""
2048            fi
2049            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2050            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2051        fi
2052    fi
2053}
2054
2055ParseModprobeForIncludes() {
2056local MODPROBE_CONF mpincfile includes include
2057
2058MODPROBE_CONF=/etc/modprobe.conf
2059mpincfile=$1
2060touch $mpincfile
2061if [ -a $MODPROBE_CONF ]; then
2062    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2063    if [ -n "$includes" ]; then
2064        for include in $includes
2065        do
2066            if [ -a "$include" ]; then
2067                echo $include >> $mpincfile
2068            fi
2069        done
2070    fi
2071fi
2072}
2073
2074
2075PrepareDataDiskImages() {
2076    local needlist bigdir diskdir res i j k lines lfiles includefile
2077
2078    rm -f $MINDI_CACHE/mindi.iso
2079    needlist=$MINDI_TMP/what-we-need.txt
2080    bigdir=$MINDI_TMP/bigdir
2081    mkdir -p $bigdir/usr/bin
2082    mkdir -p $bigdir/usr/sbin
2083    includefile=$MINDI_TMP/$$.includefile.txt
2084
2085    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2086    if [ -e "$DEPLIST_FILE" ]; then
2087        lfiles="$DEPLIST_FILE $lfiles"
2088    fi
2089    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2090    ParseModprobeForIncludes $includefile
2091    lines=$(($lines+`cat $includefile | wc -l`))
2092    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2093    res=$?
2094    rm -f $includefile
2095    ListKernelModulePaths >> $needlist
2096    if [ "$res" -ne "0" ] ; then
2097        Die "You have $res files present in dependency list\nbut absent from filesystem."
2098    fi
2099    mkdir -p $bigdir/tmp
2100    if [ _"$MONDO_SHARE" != _"" ]; then
2101        # TODO: no reason to have the cfg file stored twice
2102        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2103        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2104    fi
2105
2106    # Needs to be done after the MRCFG creation
2107    FindAndAddUserKeyboardMappingFile
2108
2109    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2110    DropOptimizedLibraries $needlist $bigdir
2111    echo -en "INFO: Assembling dependency files"
2112
2113    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2114    echo -e "$DONE"
2115
2116    # also copy io.sys and msdos.sys, if we can find them
2117    for i in `mount | cut -d' ' -f3` ; do
2118        for j in io.sys msdos.sys ; do
2119            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2120        done
2121    done
2122
2123    # master boot record, too
2124    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2125    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2126        LogAll "INFO: Backing up $i's MBR"
2127        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2128        sleep 1
2129        sync
2130        j=$i
2131        [ -h "$j" ] && j=`readlink -f $j`
2132        LogAll "INFO: Creating /dev/boot_device ($j)"
2133        mkdir -p $bigdir/dev
2134        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2135    fi
2136
2137    # Get terminfo content
2138    ti="usr/share/terminfo/l"
2139    if [ -d /$ti ]; then
2140        mkdir -p $bigdir/$ti
2141        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2142    fi
2143    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2144        cp -Rdf $MONDO_SHARE/restore-scripts/* $bigdir/usr/bin 2>> $LOGFILE
2145        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2146    fi
2147    if [ -d "/lib/dev-state" ]; then 
2148        cp -a /lib/dev-state $bigdir/lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2149    fi
2150    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2151    MakeMountlist $MINDI_TMP/mountlist.txt
2152    CheckMountlist $MINDI_TMP/mountlist.txt
2153    mkdir -p $bigdir/tmp
2154    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2155    if [ _"$MONDO_SHARE" != _"" ]; then
2156        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2157    fi
2158    if [ $LVM != "false" ]; then
2159        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2160        if [ $? -ne 0 ]; then
2161            LVM="false"
2162            rm -f $bigdir/tmp/i-want-my-lvm
2163        else
2164            LogFile "Your i-want-my-lvm file content is:"
2165            LogFile "-----------------------------------"
2166            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2167            LogFile "-----------------------------------"
2168        fi
2169    fi
2170    LogFile "INFO: Your mountlist.txt file content is:"
2171    LogFile "-----------------------------------"
2172    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2173    LogFile "-----------------------------------"
2174
2175    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2176    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2177    if [ _"$MONDO_SHARE" != _"" ]; then
2178        for q in filelist.full.gz biggielist.txt ; do
2179            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2180            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2181        done
2182    fi
2183
2184    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2185    # to get it on the media (in addition to the boot part
2186    # and also to support UEFI boot mechanism
2187    bootdir=$bigdir/syslinux
2188    bootconf="$bootdir/syslinux.cfg"
2189    boottype=syslinux
2190    mkdir -p $bootdir
2191    FindLdlinux32Binary
2192    if [ "$BOOT_TYPE" != "BIOS" ]; then
2193        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2194            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2195            MindiExit -1
2196        fi
2197        # EFI or UEFI
2198        # TODO: names are hard-coded for now
2199        if [ "$BOOT_TYPE" = "UEFI" ]; then
2200            # UEFI
2201            efidir=$bigdir/EFI/BOOT
2202            # On RHEL6 grub works
2203            dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2204            dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2205            if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2206                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2207                bootconf="$efidir/bootx64.conf"
2208                boottype=grub
2209            elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2210                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2211                bootconf="$efidir/grub.cfg"
2212                boottype=grub2
2213            elif [ $dname = "debian" ] && [ $dver = "8" ]; then
2214                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2215                bootconf="$efidir/grub.cfg"
2216                boottype=grub2
2217            else
2218                # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2219                FindSyslinux64EFI
2220                bootbin=$SYSLINUX64EFI
2221                bootconf="$efidir/syslinux.cfg"
2222            fi
2223
2224            # Depending on the arch, the target boot file is different
2225            if [ "$ARCH" = "x86_64" ] ; then
2226                tgbin="bootx64.efi"
2227            elif [ "$ARCH" = "armv8" ]; then
2228                tgbin="bootaa64.efi"
2229            else
2230                # i?386
2231                tgbin="bootia32"
2232            fi
2233        else
2234            # EFI
2235            efidir=$bootdir
2236            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2237            tgbin=$bootbin
2238            boottype=elilo
2239            bootconf="$efidir/elilo.conf"
2240        fi
2241        LogAll "INFO: Found $boottype boot type"
2242
2243        # Copy it so that CD-ROM menu entry is satisfied
2244        mountefi=0
2245        df -T | grep /boot/efi | grep -qE 'vfat'
2246        if [ $? -ne 0 ]; then
2247            mount /boot/efi
2248            if [ $? -ne 0 ]; then
2249                echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2250                MindiExit -1
2251            fi
2252            mountefi=1
2253        fi
2254        mkdir -p $efidir
2255        cp $bootbin $efidir/$tgbin
2256        if [ $mountefi -eq 1 ]; then
2257            umount /boot/efi 2>&1 > /dev/null
2258        fi
2259
2260        if [ $boottype = "syslinux" ]; then
2261            FindLdlinuxe64Binary
2262            if [ -e "$LDLINUXE64" ]; then
2263                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2264                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2265                cp $LDLINUXE64/../libutil.c32 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2266            fi
2267        fi
2268        # In all cases prepare syslinux content for BIOS mode
2269        # so that we can have multi boot mode media BIOS+UEFI
2270        if [ -e "$LDLINUXC32" ]; then
2271            LogFile "INFO: Copying $LDLINUXC32 to $bigdir/EFI"
2272            cp $LDLINUXC32 "$bigdir/EFI" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bigtdir/EFI. Did you run out of disk space?"
2273        fi
2274    else
2275        # Useful for syslinux 5.x
2276        if [ -e "$LDLINUXC32" ]; then
2277            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2278            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir. Did you run out of disk space?"
2279        fi
2280    fi
2281
2282    # Here we need to know the ramdisk_size
2283    size_of_all_tools=`du -sk $bigdir | cut -f1`
2284    export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2285    LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2286
2287    MakeBootConfFile $boottype > $bootconf
2288    if [ "$BOOT_TYPE" = "UEFI" ]; then
2289        # Also generate the syslinux conf
2290        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2291    fi
2292
2293    echo -en "INFO: Tarring and zipping the data content..."
2294    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2295    LogFile "Size of the data content"
2296    LogFile "------------------------"
2297    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2298    LogFile "------------------------"
2299    echo -e "$DONE"
2300
2301    rm -rf $bigdir
2302    rm -f $needlist
2303}
2304
2305
2306Prompt() {
2307    echo -en "$1"
2308    read line
2309}
2310
2311
2312ReadLine() {
2313    local i incoming
2314    read incoming
2315    i=0
2316    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2317        i=$(($i+1))
2318        read incoming
2319    done
2320    echo "$incoming"
2321}
2322
2323
2324SizeOfPartition() {
2325    local devpath drive res stub
2326    device=$1
2327    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2328        Die "Cannot find $device's size - is your /etc/fstab sane?"
2329    fi
2330    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2331        res=`SizeOfRaidPartition $device`
2332        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2333        echo "$res"
2334        return 0
2335    fi
2336    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2337    res=`$FDISK -s $device 2>> $LOGFILE`
2338    # end patch
2339    # take only the first in case of multiple mount (cifs, nfs, ...)
2340    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2341    [ "$res" = "" ] && res="-1"
2342    echo $res
2343    return 0
2344}
2345
2346
2347SizeOfRaidPartition() {
2348    local real_dev smallest_size silly tmp
2349
2350    silly=999999999
2351    smallest_size=$silly
2352
2353    for real_dev in `GetRaidDevMembers $1` ; do
2354        tmp=`SizeOfPartition $real_dev`
2355        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2356    done
2357
2358    if [ "$smallest_size" = "$silly" ] ; then
2359        echo "-1"
2360        return 1
2361    else
2362        echo "$smallest_size"
2363        return 0
2364    fi
2365}
2366
2367
2368StripExecutable()
2369{
2370    local tmpfile
2371
2372    tmpfile=$MINDI_TMP/stripped.$$.dat
2373    [ -d "$1" ] || [ -h "$1" ] && return
2374    cp -f $1 $tmpfile 2>> $LOGFILE
2375    strip $tmpfile 2> /dev/null
2376    if [ $? -eq 0 ] ; then
2377        cp -f $tmpfile $1 2>> $LOGFILE
2378        LogFile "INFO: Stripped binary $2"
2379    fi
2380    rm -f $tmpfile
2381}
2382
2383KernelVer() {
2384        local fkern_ver fname
2385
2386        fname=$1
2387        file $fname | grep -q gzip
2388        if [ $? -eq 0 ] ; then
2389            # Used by ia64
2390            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2391        else
2392            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2393        fi
2394        echo "$fkern_ver"
2395}
2396
2397
2398# WARNING: This function should just echo the final result !!!
2399#
2400TryToFindKernelPath() {
2401    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2402
2403    we_want_version=$KERVERRUN
2404    possible_kernels=""
2405    duff_kernels=""
2406    output=""
2407
2408    if [ "$ARCH" = "ia64" ] ; then
2409       root="/boot/efi/efi"
2410    else
2411       root="/"
2412    fi
2413    # See if we're booted from a Xen kernel
2414    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2415    if [ -f /proc/xen/capabilities ]; then
2416        # It's a Xen kernel
2417        KERNEL_IS_XEN="yes"
2418        LogFile "INFO: It's a Xen kernel..."
2419    fi
2420
2421    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2422        [ ! -e "$fname" ] && continue
2423        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2424        fkern_ver=`KernelVer $fname`
2425        [ "$fkern_ver" = "" ] && continue
2426        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2427        [ -f "$fname" ] || continue
2428        [ -h "$fname" ] && continue
2429        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2430        file $fname | grep -q gzip
2431        if [ $? -eq 0 ] ; then
2432            # Used by ia64
2433            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2434                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2435                duff_kernels="$fname $duff_kernels"
2436            else
2437                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2438                possible_kernels="$fname $possible_kernels"
2439            fi
2440        else
2441            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2442                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2443                duff_kernels="$fname $duff_kernels"
2444            else
2445                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2446                possible_kernels="$fname $possible_kernels"
2447            fi
2448        fi
2449    done
2450    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2451        possible_kernels=`find /boot/vmlinuz-[2-9].* | tail -n1`
2452    fi
2453    if [ ! "$possible_kernels" ] ; then
2454        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2455        possible_kernels="$duff_kernels"
2456        if [ ! "$possible_kernels" ] ; then
2457            LogAll "INFO: Sorry, no duff kernels either"
2458        else
2459            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2460            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2461        fi
2462    fi
2463    if [ $KERNEL_IS_XEN = "yes" ]; then
2464        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2465        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2466    fi
2467    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2468    noof_kernels=`CountItemsIn "$possible_kernels"`
2469    if [ "$noof_kernels" -eq "0" ] ; then
2470        LogAll "Could not find your kernel."
2471        if [ -e "/boot/vmlinuz" ] ; then
2472            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2473            output=/boot/vmlinuz
2474        else
2475            output=""
2476        fi
2477    elif [ "$noof_kernels" -eq "1" ] ; then
2478        kp=`echo "$possible_kernels" | sed s/' '//`
2479        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2480        output="$kp"
2481    else
2482        for i in $possible_kernels ; do
2483            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2484                LogAll "INFO: OK, I used my initiative and found that "
2485                LogAll "INFO: $i is probably your kernel. "
2486                output="$i"
2487                break
2488            fi
2489        done
2490        if [ ! -n "$output" ]; then
2491            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2492                output=/boot/vmlinuz
2493                LogFile "INFO: Schlomo, this one's for you."
2494            else
2495                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2496                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2497                LogFile "INFO: $possible_kernels"
2498                output=""
2499            fi
2500        fi
2501    fi
2502    if [ $KERNEL_IS_XEN = "yes" ]; then
2503        if [ "$noof_xenkernels" -eq "0" ]; then
2504            xenkernelpath=""
2505        elif [ "$noof_xenkernels" -eq "1" ]; then
2506            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2507            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2508        else
2509            for i in $possible_xenkernels ; do
2510                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2511                    LogFile "INFO: OK, I used my initiative and found that "
2512                    LogFile "INFO: $i is probably your Xen kernel. "
2513                    xenkernelpath="$i"
2514                    break
2515                fi
2516            done
2517            if [ ! -n "$xenkernelpath" ]; then
2518                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2519                if [ ! -n "$new_possible_xenkernels" ]; then
2520                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2521                    LogFile "INFO: Using $xenkernelpath"
2522                else
2523                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2524                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2525                    LogFile "INFO: $possible_xenkernels"
2526                    output=""
2527                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2528                    LogFile "INFO: Using $xenkernelpath"
2529                fi
2530            fi
2531        fi
2532        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2533            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2534        fi
2535    fi
2536    #LogAll "TryToFindKernelPath found $output"
2537    echo "$output"
2538}
2539
2540
2541MakeBootInitFile() {
2542    local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2543
2544    tgz_dir_fname=$1
2545    rdz_fname=$2
2546    kernelsize=$3
2547    tempfile=$MINDI_TMP/temp.rd
2548    res=0 
2549    templog=$MINDI_TMP/$$.log
2550    > $templog
2551
2552    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2553    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2554    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2555    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2556    mkdir -p $mountpoint
2557    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2558
2559    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2560    for d in bin sbin lib lib64; do
2561        if [ -h "/$d" ]; then
2562            thelink=`readlink /$d`
2563            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2564            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2565            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2566                rmdir $mountpoint/$d
2567            fi
2568            if [ ! -h $mountpoint/$d ]; then
2569                rm -f $mountpoint/$d 2> /dev/null
2570                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2571            fi
2572        fi
2573    done
2574
2575    LogFile "INFO: what is now in $mountpoint"
2576    ls -al $mountpoint >> $LOGFILE
2577   
2578    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2579    # copy from rootfs into mountpoint
2580    LogAll "INFO: Copying Mindi files onto $mountpoint"
2581    for f in $tgz_dir_fname/*; do 
2582        if [ ! -r $f ]; then
2583            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2584        else
2585            cp -af $f $mountpoint 2>&1 >> $LOGFILE
2586        fi
2587    done
2588    (cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2589    (cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2590
2591    (cd $mountpoint/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2592
2593    for w in insmod.static insmod.static.old ; do
2594        s=`which $w 2> /dev/null`
2595        if [ -e "$s" ] ; then
2596            tar cf - -C / $s 2> /dev/null | (cd $mountpoint ; tar xf -)
2597        fi
2598    done
2599
2600    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2601   
2602    # Copy of files mandatory for ssh to automate mount if sshfs is used
2603    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2604    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2605    cat > $mountpoint/tmp/myssh << EOF
2606ssh -o StrictHostKeyChecking=no $*
2607EOF
2608    chmod 755 $mountpoint/tmp/myssh
2609
2610    # Copy of files mandatory for ld.so
2611    cp -a /etc/ld.so.c* $mountpoint/etc
2612
2613    # Handle the case where busybox and mount are dynamically linked
2614    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2615    if [ $? -eq 0 ]; then
2616        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2617        rm -f bin/mount
2618    fi
2619
2620    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2621    echo -en "INFO: Gathering dependencies of required files..."
2622    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2623    lines=`cat $DEPLIST_DIR/minimal.conf | grep -vE " *#.*|^#" | sort -u`
2624    noof_lines=`echo $lines | wc -w`
2625    progress=0
2626    for f in $lines; do
2627        if [ -d $f ]; then
2628            for g in `find $f`; do 
2629                echo $g >> $MINDI_TMP/minimal.lis
2630                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2631            done
2632        else 
2633            if [ -r $f ]; then
2634                echo $f >> $MINDI_TMP/minimal.lis
2635                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2636            fi
2637        fi
2638        progress=$(($progress+1))
2639        LogProgress $progress $noof_lines
2640    done
2641    echo -e "$DONE"
2642    echo -en "INFO: Processing all dependencies links..."
2643    lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
2644    noof_lines=`echo $lines | tr ' ' '\n' | wc -l`
2645    progress=0
2646    for f in $lines; do
2647        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2648        progress=$(($progress+1))
2649        LogProgress $progress $noof_lines
2650    done
2651    echo -e "$DONE"
2652    # Initial / are trucated by tar
2653    finallist=""
2654    # Remove directories from the list, as tar/cp will create them anyway
2655    # and it may hurt if /lib is in it as on Debian/Ubuntu
2656    # recent bash says that -d is true for a link to a dir !
2657    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2658        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2659            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2660            if [ ! -e "$mountpoint/$f" ]; then
2661                finallist="$finallist $f"
2662            fi
2663        fi
2664    done
2665    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2666
2667    fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2668    LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
2669    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog
2670
2671    # In case target /bin dir still doesn't exist, create it before using it
2672    if [ ! -d $mountpoint/bin ]; then
2673        mkdir -p $mountpoint/bin
2674    fi
2675
2676    # For older distributions expecting /sbin/init provides it
2677    if [ ! -e "$mountpoint/sbin/init" ]; then
2678        (cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2679    fi
2680
2681    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2682    (cd $mountpoint ; ln -sf /bin/bash bin/sh)
2683    LogFile "INFO: Using bash as default shell"
2684
2685    # Avoids an issue on some distro (RHEL5)
2686    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2687
2688    # Management of udev (which includes modprobe in rules)
2689    ps auxww | grep -v grep | grep -qw udevd
2690    if [ $? -eq 0 ]; then
2691        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2692        LogFile "INFO: udev device manager found"
2693        tar cf - -C / /etc/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /etc/udev analysis" $templog
2694        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2695        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2696        # Do not do it if it's a link (Ubuntu 64 bits #503)
2697        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2698            tar cf - -C / /lib64/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /lib64/udev analysis" $templog
2699        fi
2700        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2701            tar cf - -C / /lib32/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /lib32/udev analysis" $templog
2702        fi
2703        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2704            tar cf - -C / /lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /lib/udev analysis" $templog
2705        fi
2706        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2707            tar cf - -C / /usr/lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog
2708        fi
2709        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2710            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2711            lis=""
2712            # Get only the files which exist in that list
2713            # and potentially their symlink structure
2714            for i in $lis2; do
2715                if [ -h $i ]; then
2716                    j=$i
2717                    while [ -h $j ]; do
2718                        lis="$lis $j"
2719                        j=`readlink -f $j`
2720                    done
2721                    lis="$lis $j"
2722                elif [ -d $i ]; then
2723                    lis3="$lis3 $i"
2724                elif [ -f $i ]; then
2725                    lis="$lis $i"
2726                fi
2727            done
2728            # And their deps
2729            LocateDeps $lis > $MINDI_TMP/udev.lis
2730            for i in $lis; do
2731                if [ "`echo $i | cut -c1`" = "/" ]; then
2732                    j=`echo $i | cut -c2-`
2733                    [ "$j" != "" ] && rm -f $j
2734                fi
2735                echo "$i" >> $MINDI_TMP/udev.lis
2736            done
2737            finallist=""
2738            # Remove directories from the list, as tar/cp will create them anyway
2739            # and it may hurt if /lib is in it as on Debian/Ubuntu
2740            # recent bash says that -d is true for a link to a dir !
2741            for f in `sort -u $MINDI_TMP/udev.lis`; do
2742                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2743                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2744                    if [ ! -e "$mountpoint/$f" ]; then
2745                        finallist="$finallist $f"
2746                    fi
2747                fi
2748            done
2749            # But adds the directory useful for udev in $lis3
2750            fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2751            LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
2752            cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog  || LogIt "WARNING: Problem in udev.lis analysis" $templog
2753            rm -f $MINDI_TMP/udev.lis
2754        else
2755            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2756            LogAll "         mindi will use static devices which may cause problems"
2757            rm -f $mountpoint/tmp/USE-UDEV
2758        fi
2759    fi
2760
2761    # Management of potential HW info (ProLiant only at the moment)
2762    rm -rf $MINDI_CACHE/bkphw
2763    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2764    if [ -d $MINDI_CACHE/bkphw ]; then
2765        LogIt "INFO: Hardware Information found and saved ..."
2766        cp -rp $MINDI_CACHE/bkphw $mountpoint
2767        if [ -f $MINDI_CACHE/tools.files ]; then
2768            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2769            LocateDeps $lis > $MINDI_TMP/tools.lis
2770            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in tools.lis analysis" $templog
2771        fi
2772        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2773            mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2774            chmod 755 $mountpoint/mindi-rsthw
2775        fi
2776        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2777    fi
2778
2779    # Management of perl scripts delivered needed at restore time
2780    LogAll "INFO: Analyzing perl modules dependencies..."
2781    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog
2782    LogFile "DBG4: Perl Modules found:"
2783    LogFile "-------------------------"
2784    cat $MINDI_TMP/perl.lis >> $LOGFILE
2785    LogFile "-------------------------"
2786    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in perl scripts analysis" $templog
2787
2788    for w in cdrom groovy-stuff ; do
2789        mkdir -p mnt/$w
2790    done
2791
2792    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in fd dev analysis" $templog
2793
2794    needed_modules=""
2795    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2796
2797    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2798        # For PXE boot
2799        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2800    fi
2801    for i in $DENY_MODS; do
2802        LogFile "INFO: Removing $i from the list of modules to load"
2803        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2804    done
2805
2806    if [ "${kernelname}" != "" ]; then
2807        needed_modules_path=lib/modules/${kernelname}
2808        mkgmopt="-k ${kernelname}"
2809    else
2810        needed_modules_path=lib/modules/$KERVERRUN
2811        mkgmopt="-k $KERVERRUN"
2812    fi
2813
2814    [ -e "/$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2815    LogAll "INFO: Analyzing kernel modules dependencies..."
2816    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2817
2818    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2819    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog
2820
2821    # Uncompress modules if not using udev and native modprobe
2822    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2823        for i in $needed_modules; do
2824            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2825                gunzip -f $mountpoint/$i
2826            fi
2827            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2828                bunzip2 -f $mountpoint/$i
2829            fi
2830            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2831                unxz -f $mountpoint/$i
2832            fi
2833            LogFile "INFO: Uncompressing $i"
2834        done
2835    fi
2836
2837    # Also copy modules.* in case of udev so that normal modprobe works
2838    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog
2839
2840    # Copy FW in case some drivers needs it
2841    for d in "/lib" "/usr/lib"; do
2842        if [ -d "$d/firmware" -a ! -h $d ]; then
2843            cp -a "$d/firmware" "$mountpoint/$d"
2844        fi
2845    done
2846
2847    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2848    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2849        if [ -d "$d/multipath" -a ! -h $d ]; then
2850            cp -a "$d/multipath" "$mountpoint/$d"
2851        fi
2852    done
2853
2854    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2855    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2856
2857    # Copy an additional ProLiant tool for OBDR support
2858    if [ -f $MINDI_TMP/OBDR ]; then
2859        found=0
2860        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2861            mkdir -p $mountpoint/usr/bin
2862            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2863            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2864            found=1
2865        fi
2866        if [ -x /usr/bin/sg_wr_mode ]; then
2867            mkdir -p $mountpoint/usr/bin
2868            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2869            LocateDeps $lis > $MINDI_TMP/obdr.lis
2870            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in obdr.lis analysis" $templog
2871            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2872            found=1
2873        fi
2874        if [ $found -eq 0 ]; then
2875            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2876            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2877        fi
2878    fi
2879
2880    if [ ! -e "/sbin/devfsd" ]; then
2881        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2882        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2883        rm -f $mountpoint/sbin/devfsd
2884    fi
2885    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2886    if [ _"$MONDO_SHARE" != _"" ]; then
2887        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2888        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2889        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2890        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2891        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2892    fi
2893
2894    # Create module list to load at restore time
2895    rm -f $mountpoint/tmp/modules
2896    for m in $CDROM_MODS; do
2897        echo $m >> $mountpoint/tmp/modules
2898    done
2899
2900    mkdir -p $mountpoint/proc
2901    LogFile "---------------------------"
2902    LogFile "Size of initial ramdisk:"
2903    LogFile "---------------------------"
2904    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2905    LogFile "---------------------------"
2906    LogFile "Content of initial ramdisk:"
2907    LogFile "---------------------------"
2908    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2909    LogFile "---------------------------"
2910
2911    # Determine what filesystem to use for initrd image
2912    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2913    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2914    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2915    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2916        # say what will be used
2917        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2918        # kernel expects linuxrc in ext2 filesystem
2919        (cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2920        # unmount loop filesystem and create image file using the standard approach
2921        umount $mountpoint || Die "Cannot unmount $tempfile"
2922        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2923        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2924            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2925        else
2926            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2927        fi
2928        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2929        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2930        rm -f ${rdz_fname}.tmp
2931        # log that we are done
2932    elif [ "$gvFileSystem" = "initramfs" ]; then
2933        # say what will be used
2934        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2935        # make sure that cpio is there
2936        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2937        # kernel expects init in cpio filesystem
2938        (cd "$mountpoint" ; ln -sf usr/sbin/init init)
2939        # create cpio image file and unmount loop filesystem
2940        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
2941        umount $mountpoint || Die "Cannot unmount $tempfile"
2942        # log that we are done
2943    else
2944        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2945    fi
2946
2947    if [ "$res" -eq "0" ] ; then
2948        LogAll "INFO: MakeBootInitFile finished without error."
2949    else
2950        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
2951    fi
2952    return 0
2953}
2954
2955
2956##############################################################################
2957#----------------------------------- Main -----------------------------------#
2958##############################################################################
2959
2960# Now we can create what we need
2961mkdir -p $MINDI_TMP
2962
2963# --nolog needs to be first, and is used in analyze-my-lvm
2964if [ "$1" = "--nolog" ] ; then
2965    shift
2966    LOGFILE=/dev/stderr
2967else
2968    > $LOGFILE
2969fi
2970if [ "$1" = "--printvar" ] ; then
2971    shift
2972    if [ _"$1" != _"" ] ; then
2973        set | grep -Ew "^$1" | cut -d= -f2
2974    fi
2975    exit 0
2976fi
2977
2978LogFile "mindi v$MINDI_VERSION"
2979LogFile "-----------------------------"
2980LogFile "Start date : `date`"
2981LogFile "-----------------------------"
2982LogFile "$ARCH architecture detected"
2983LogFile "mindi called with the following arguments:"
2984echo "$@">> $LOGFILE
2985LogFile "-----------------------------"
2986LogFile "pbdistrocheck results:"
2987pbdistrocheck >> $LOGFILE
2988LogFile "-----------------------------"
2989
2990# Log some capital variables
2991[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2992[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2993LogFile "MONDO_SHARE = $MONDO_SHARE"
2994LogFile "MINDI_LIB = $MINDI_LIB"
2995LogFile "MINDI_SBIN = $MINDI_SBIN"
2996LogFile "MINDI_CONF = $MINDI_CONF"
2997# Purge from potential old run
2998if [ _"$MINDI_CACHE" = _"" ]; then
2999    Die "MINDI_CACHE undefined"
3000else
3001    LogFile "MINDI_CACHE = $MINDI_CACHE"
3002fi
3003
3004if [ -f $MINDI_CONFIG ]; then
3005    LogFile "-----------------------------"
3006    LogFile " Mindi configuration file    "
3007    LogFile "-----------------------------"
3008    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
3009    LogFile "-----------------------------"
3010fi
3011LogFile "In Mindi"
3012LogFile "--------"
3013LogFile "EXTRA_SPACE = $EXTRA_SPACE"
3014LogFile "--------"
3015
3016trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
3017
3018# Sanity checks
3019which which > /dev/null 2> /dev/null || Die "Please install 'which'."
3020which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
3021which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
3022which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
3023if which awk &> /dev/null ; then
3024    if ! which gawk &> /dev/null ; then
3025        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3026    fi
3027fi
3028which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3029[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3030
3031[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3032
3033# Update the PATH variable if incomplete
3034if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3035    PATH=$PATH:/sbin:/usr/sbin
3036    export PATH
3037    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3038    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3039    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3040fi
3041
3042if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3043    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3044fi
3045
3046### TODO
3047### Fix as it's not mandatory on ia64
3048if [ "$ARCH" = "ia64" ] ; then
3049    if which elilo &> /dev/null ; then
3050        LILO_EXE=elilo
3051    else
3052        LILO_EXE=`which false 2> /dev/null`
3053    fi
3054else
3055    FindIsolinuxBinary
3056fi
3057trap "Aborted" SIGTERM
3058DONE="\r\t\t\t\t\t\t\t\tDone.         "
3059kernelpath=""
3060MONDO_ROOT=/var/cache/mondo
3061mkdir -p $MONDO_ROOT
3062
3063if [ -d "/proc/lvm" ]; then
3064    # LVM v1
3065    LVMCMD=""
3066    LVM="v1"
3067elif [ -d "/dev/mapper" ]; then
3068    # LVM v2
3069    LVMCMD="lvm"
3070    LVM="v2"
3071else
3072    LVM="false"
3073fi
3074
3075if [ -e "/proc/cmdline" ]; then
3076    CMDLINE="/proc/cmdline"
3077elif [ -e "/tmp/cmdline" ]; then
3078    CMDLINE="/tmp/cmdline"
3079else
3080    CMDLINE="/dev/null"
3081fi
3082
3083LogFile "INFO: LVM set to $LVM"
3084LogFile "----------"
3085LogFile "mount result:"
3086LogFile "-------------"
3087mount >> $LOGFILE
3088if [ -e "/etc/raidtab" ]; then
3089    LogFile "-------------"
3090    LogFile "/etc/raidtab content:"
3091    LogFile "-------------"
3092    cat /etc/raidtab >> $LOGFILE
3093else
3094    LogFile "No file /etc/raidtab"
3095fi
3096if [ -e "/etc/mdadm.conf" ]; then
3097    LogFile "-------------"
3098    LogFile "/etc/mdadm.conf content:"
3099    LogFile "-------------"
3100    cat /etc/mdadm.conf >> $LOGFILE
3101else
3102    LogFile "-------------"
3103    LogFile "No file /etc/mdadm.conf"
3104fi
3105LogFile "-------------"
3106LogFile "cat $CMDLINE"
3107LogFile "-------------"
3108cat $CMDLINE >> $LOGFILE
3109LogFile "-------------"
3110LogFile "cat /proc/swaps:"
3111LogFile "-------------"
3112cat /proc/swaps >> $LOGFILE
3113LogFile "-------------"
3114if [ -e "/proc/mdstat" ]; then
3115    LogFile "cat /proc/mdstat:"
3116    LogFile "-------------"
3117    cat /proc/mdstat >> $LOGFILE
3118else
3119    LogFile "No pseudo file /proc/mdstat"
3120fi
3121LogFile "-------------"
3122LogFile "cat /proc/partitions:"
3123LogFile "-------------"
3124cat /proc/partitions >> $LOGFILE
3125LogFile "-------------"
3126LogFile "cat /proc/filesystems:"
3127LogFile "-------------"
3128cat /proc/filesystems >> $LOGFILE
3129LogFile "-------------"
3130LogFile "lsmod result:"
3131LogFile "-------------"
3132lsmod >> $LOGFILE
3133MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3134if [ -x /usr/sbin/esxcfg-module ]; then
3135    LogFile "-------------"
3136    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3137    LogFile "-------------"
3138    LogFile "VMWare modules"
3139    LogFile "-------------"
3140    /usr/sbin/esxcfg-module -l >> $LOGFILE
3141    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3142fi
3143LogFile "-------------" 
3144LogFile "FORCE_MODS:"
3145LogFile "-------------"
3146LogFile "$FORCE_MODS"
3147LogFile "-------------"
3148LogFile "DENY_MODS:"
3149LogFile "-------------"
3150LogFile "$DENY_MODS"
3151LogFile "-------------"
3152LogFile "df result:"
3153LogFile "----------"
3154df -aT >> $LOGFILE
3155LogFile "-------------"
3156LogFile "df -i result:"
3157LogFile "----------"
3158df -i >> $LOGFILE
3159LogFile "-------------"
3160if [ -r /boot/grub/menu.lst ]; then
3161    LogFile "-------------"
3162    LogFile "INFO: /boot/grub/menu.lst content"
3163    LogFile "-------------"
3164    cat /boot/grub/menu.lst >> $LOGFILE
3165    LogFile "-------------"
3166fi
3167if [ -r /boot/grub/grub.conf ]; then
3168    LogFile "-------------"
3169    LogFile "INFO: /boot/grub/grub.conf content"
3170    LogFile "-------------"
3171    cat /boot/grub/grub.conf >> $LOGFILE
3172    LogFile "-------------"
3173fi
3174if [ -r /boot/grub/grub.cfg ]; then
3175    LogFile "-------------"
3176    LogFile "INFO: /boot/grub/grub.cfg content"
3177    LogFile "-------------"
3178    cat /boot/grub/grub.cfg >> $LOGFILE
3179    LogFile "-------------"
3180fi
3181if [ -r /boot/grub/device.map ]; then
3182    LogFile "-------------"
3183    LogFile "INFO: /boot/grub/device.map content"
3184    LogFile "-------------"
3185    cat /boot/grub/device.map >> $LOGFILE
3186    LogFile "-------------"
3187fi
3188if [ -r /etc/lilo.conf ]; then
3189    LogFile "-------------"
3190    LogFile "INFO: /etc/lilo.conf content"
3191    LogFile "-------------"
3192    cat /etc/lilo.conf >> $LOGFILE
3193fi
3194if [ -d /boot/efi ]; then
3195    gcf=`find /boot/efi -name 'grub.c*'`
3196    if [ _"$gcf" = _"" ]; then
3197        LogFile "Found a /boot/efi directory without a grub config file in it"
3198    else
3199        LogFile "-------------"
3200        LogFile "INFO: $gcf content"
3201        LogFile "-------------"
3202        cat $gcf >> $LOGFILE
3203        LogFile "-------------"
3204    fi
3205fi
3206
3207LogFile "Full fdisk info"
3208LogFile "---------------"
3209$FDISK -l >> $LOGFILE
3210LogFile "----------------"
3211
3212# Compute libata version
3213laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3214# If libata v2 is used then remove ide-generic as it will perturbate boot
3215if [ "`echo $MODULES | grep libata`" ]; then
3216    if [ "$laver" = "2" ]; then
3217        DENY_MODS="$DENY_MODS ide-generic"
3218        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3219        LogFile "-------------"
3220    fi
3221fi
3222
3223# Check for McAfee which disturbs the access to some files (tgz in articular)
3224if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3225    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3226    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3227    LogFile "WARNING: You have two options:"
3228    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3229    LogFile "WARNING:  - Disable the scanner during the backup"
3230fi
3231
3232#
3233# If we have a USB device we need to store info
3234# and remove it from the parameters line
3235#
3236if [ "$#" -ne "0" ] ; then
3237    if [ "$1" = "--usb" ] ; then
3238        shift
3239        USBDEVICE=$1
3240        if [ _"$USBDEVICE" = _"" ]; then
3241            Die "No USB device specified"
3242        fi
3243        shift
3244    fi
3245fi
3246
3247if [ "$#" -ne "0" ] ; then
3248    if [ "$1" = "--findkernel" ] ; then
3249        resk=`TryToFindKernelPath`
3250        # Avoids logfile content for mondo
3251        export MONDO_SHARE=""
3252        if [ "$resk" = "" ] ; then
3253            if [ $KERNEL_IS_XEN = "yes" ]; then
3254                echo "$xenkernelpath"
3255                LogFile "INFO: xenkernelpath = $xenkernelpath"
3256                MindiExit 0
3257            else
3258                MindiExit -1
3259            fi
3260        else
3261            echo "$resk"
3262            LogFile "INFO: kernelpath = $resk"
3263            MindiExit 0
3264        fi
3265    elif [ "$1" = "--locatedeps" ] ; then
3266        [ ! "$2" ] && Die "Please specify the binary to look at"
3267        LocateDeps $*
3268        # Avoids logfile content for mondo
3269        export MONDO_SHARE=""
3270        MindiExit $?
3271    elif [ "$1" = "--readalllink" ] ; then
3272        [ ! "$2" ] && Die "Please specify the binary to look at"
3273        # Avoids logfile content for mondo
3274        export MONDO_SHARE=""
3275        mr-read-all-link $2
3276        MindiExit $?
3277    elif [ "$1" = "--makebcf" ] ; then
3278        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3279        MakeBootConfFile $2
3280        MindiExit 0
3281    elif [ "$1" = "--makemessage" ] ; then
3282        MakeMessageFile | cut -c1-80
3283        MindiExit 0
3284    elif [ "$1" = "--makemountlist" ] ; then
3285        [ ! "$2" ] && Die "Please specify the output file"
3286        MakeMountlist $2
3287        CheckMountlist $2
3288        # Avoids logfile content for mondo
3289        export MONDO_SHARE=""
3290        MindiExit $?
3291    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3292        echo "Mindi v$MINDI_VERSION"
3293        # Avoids logfile content for mondo
3294        export MONDO_SHARE=""
3295        MindiExit 0
3296    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3297        MONDO_TMP=$2
3298        # Change MINDI_TMP for the one provided by mondo
3299        # So that it can get back the built files
3300        if [ _"$MONDO_TMP" = _"" ]; then
3301            Die "MONDO_TMP is empty, aborting"
3302        fi
3303        if [ _"$MONDO_TMP" = _"/" ]; then
3304            Die "MONDO_TMP is /, aborting"
3305        fi
3306        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3307        rmdir $MINDI_TMP
3308        export MINDI_TMP=$MONDO_TMP
3309        mkdir -p $MINDI_TMP
3310
3311        # This is the scratch dir in mondo - subdir images
3312        MINDI_CACHE=$3
3313        LogFile "MINDI_CACHE = $MINDI_CACHE"
3314
3315        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3316        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3317       
3318###
3319### Sq-Modification...
3320### Attempt to locate kernel specific module path
3321### if module path is found then use it other wise use uname -r to set it...
3322###
3323        if [ $KERNEL_IS_XEN = "yes" ]; then
3324            LogAll "INFO: xenkernelpath = $xenkernelpath"
3325        fi
3326        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3327        if [ ! -d "/lib/modules/$kernelname" ]; then
3328           LogAll "WARNING: Module path for ${kernelpath} not found..."
3329           LogAll "         using running kernel\'s modules."
3330           kernelname=$KERVERRUN
3331        else
3332           LogAll "INFO: Using modules for kernel: ${kernelname}"
3333        fi
3334        LogAll "INFO: kernelname = $kernelname"
3335        LogAll "INFO: kernelpath = $kernelpath"
3336###
3337### end of Sq-Modification
3338###
3339        TAPEDEV=$5
3340        TAPESIZE=$6
3341        FILES_IN_FILELIST=$7
3342        USE_LZO=$8
3343        CDRECOVERY=$9
3344        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3345            IMAGE_DEVS=""
3346        else
3347            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3348        fi
3349        if [ "${11}" ] ; then
3350            LILO_OPTIONS=""
3351    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3352        fi
3353        LAST_FILELIST_NUMBER=${12}
3354        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3355        export MINDI_EXCLUDE_DEVS="${14}"
3356        USE_COMP="${15}"
3357        USE_LILO="${16}"
3358        USE_STAR="${17}"
3359        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3360        DIFFERENTIAL="${19}"
3361        USE_GZIP="${20}"
3362        USE_LZMA="${21}"
3363        NOT_BOOT="${22}"
3364        BOOT_TYPE="${23}"
3365        [ "$USE_COMP" = "" ] && USE_COMP=yes
3366        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3367        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3368        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3369        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3370        # MONDO_ROOT is the real scratchdir
3371        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3372        if [ _"$MONDO_ROOT" != _"" ]; then
3373            mkdir -p $MONDO_ROOT
3374        else
3375            Die "MONDO_ROOT is undefined"
3376        fi
3377    else
3378        LogScreen "Syntax: mindi (--custom ....)"
3379        MindiExit -1
3380    fi
3381fi
3382
3383if [ _"$MINDI_CACHE" != _"" ]; then
3384    rm -rf $MINDI_CACHE/* 2> /dev/null
3385    mkdir -p $MINDI_CACHE
3386fi
3387
3388[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3389
3390if [ _"$MONDO_SHARE" = _"" ]; then
3391    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3392    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3393    LogIt "BusyBox sources are available from http://www.busybox.net"
3394    LogIt "------------------------------------------------------------------------------"
3395else
3396    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3397fi
3398if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3399    LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3400else
3401    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3402    MindiExit -1
3403fi
3404
3405for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3406    modinfo $i 2> /dev/null 1> /dev/null
3407    if [ $? -eq 0 ]; then
3408        modprobe $i 2>&1 > /dev/null
3409    fi
3410done
3411
3412LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3413LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3414LogFile "NOT_BOOT = '$NOT_BOOT'"
3415if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3416    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3417    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3418    MakeMountlist $MINDI_TMP/mountlist.txt
3419    CheckMountlist $MINDI_TMP/mountlist.txt
3420    mkdir -p $MINDI_TMP/small-all/tmp
3421    cd "$MINDI_TMP/small-all"
3422    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3423    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3424    sleep 2
3425    LogIt "Done. Exiting."
3426    MindiExit 0
3427fi
3428
3429if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3430    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3431fi
3432
3433if [ "$kernelpath" = "" ] ; then
3434    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3435    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3436    read ch
3437    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3438        USE_OWN_KERNEL="yes"
3439    else
3440        USE_OWN_KERNEL="no"
3441    fi
3442    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3443        kernelpath=`TryToFindKernelPath`
3444        if [ "$kernelpath" = "" ] ; then
3445            echo -n "Please enter kernel path : "
3446            read kernelpath
3447        fi
3448    fi
3449fi
3450
3451echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3452[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3453
3454mountpoint=$MINDI_TMP/mountpoint.$$
3455PrepareDataDiskImages
3456
3457MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not create initrd.img"
3458
3459[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3460...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3461
3462if [ _"$MONDO_SHARE" = _"" ]; then
3463    OfferToMakeBootableISO
3464    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3465        OfferToMakeBootableUSB
3466    fi
3467    LogAll "INFO: Mindi Finished"
3468elif [ "$TAPEDEV" ] ; then
3469    if [ "$ARCH" != "ia64" ] ; then
3470        # We need to keep the img file as boot file for ia64 platform
3471        rm -f $MINDI_CACHE/{*img,*iso}
3472    else
3473        rm -f $MINDI_CACHE/*iso
3474    fi
3475    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3476        OfferToMakeBootableUSB
3477    fi
3478    OfferToMakeBootableISO
3479    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3480        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3481    else
3482        Die "Cannot find all.tar.gz, to be written to tape"
3483    fi
3484elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3485    OfferToMakeBootableUSB
3486else
3487    OfferToMakeBootableISO
3488fi
3489
3490if [ -f $MINDI_TMP/$MRCFG ]; then
3491    LogFile "INFO: Your $MRCFG file is:"
3492    LogFile "--------------------------"
3493    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3494    LogFile "--------------------------"
3495else
3496    if [ _"$MONDO_SHARE" != _"" ] ; then
3497        LogIt "ERROR: You don't have a $MRCFG file !"
3498    fi
3499fi
3500# cleanup
3501MindiExit 0
Note: See TracBrowser for help on using the repository browser.