source: branches/3.2/mindi/mindi @ 3531

Last change on this file since 3531 was 3531, checked in by Bruno Cornec, 4 years ago
  • Use mkfs.vfat now everywhere (removes mkdosfs references)
  • Avoid using -F 32 to let the mkfs.vfat command choose the best size by itself. Should fix an issue with mr-label with UUIDs and also errors creating bootroot FS with mindi
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 122.1 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3531 2016-03-09 17:17:17Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=150000      # increase if you run out of ramdisk space
47
48PROMPT_MAKE_CD_IMAGE="yes"
49    # Ask if you want to make a CD Image to be written?
50    # if this is set to 'no' in the conf file, then the image will be created automatically
51
52PROMPT_MAKE_USB_IMAGE="yes"
53    # Ask if you want to make a USB Image to be written?
54    # if this is set to 'no' in the conf file, then the image will be created automatically
55
56USE_OWN_KERNEL="yes"
57    # If set to "no", you will be prompted for whether or not
58    # you want to use your own kernel, or the supplied default.
59    # If "yes" mindi will automatically use your own kernel.
60
61KERNEL_IS_XEN="no"
62    # If set to "no", the kernel is not a Xen kernel
63    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
64xenkernelpath=""
65 
66MY_FSTAB=/etc/fstab
67TAPE_MODS="ht st osst ide-tape ide_tape"
68SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
69
70# ide-probe-mod
71IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
72PCMCIA_MODS="pcmcia_core ds yenta_socket"
73USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
74NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
75CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 nls_cp437 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
76# Replace with that line for HP OCMP e.g.
77#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
78DENY_MODS="kqemu vxfen"
79# Force some modules to be included
80FORCE_MODS=""
81
82LOGFILE=/var/log/mindi.log
83BOOT_MEDIA_MESSAGE="\
84To format and restore all files automatically, type '0enuke07' <enter>.\n\
85To restore some/all files interactively, type '0einteractive07' <enter>.\n\
86To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
87To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
88\n\
89You may add one or more parameters as well as per the function keys below\n\
90e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
91\n\
92If restoring from a local external disk or USB key, do not connect it \n\
93until the boot-up has finished.\n\
94\n\
95\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
96"
97FDISK=$MINDI_SBIN/mr-parted2fdisk
98
99# Using a config file allow to overwrite some values
100MINDI_CONFIG="$MINDI_CONF/mindi.conf"
101if [ -f $MINDI_CONFIG ]; then
102    . $MINDI_CONFIG
103fi
104DEPLIST_FILE="$MINDI_CONF/deplist.txt"
105DEPLIST_DIR="$MINDI_CONF/deplist.d"
106
107# Debian 8 system e.g. use xorriso for UEFI support.
108# However, they use exactly the same command line parameters as mkisofs, so just
109# use it if it's available.
110ISO_CMD="/usr/bin/xorriso"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage.
113# However, they use exactly the same command line parameters as mkisofs, so just
114# use it if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD="/usr/bin/genisoimage"
117    # For compatibility with previous versions default to mkisofs
118    if [ ! -x $ISO_CMD ]; then
119        ISO_CMD="/usr/bin/mkisofs"
120    fi
121    if [ ! -x $ISO_CMD ]; then
122        LogFile "NOTE: No CD image (ISO file) utility found"
123        ISO_CMD = ""
124    fi
125else
126    ISO_CMD="/usr/bin/xorriso -as mkisofs"
127fi
128
129ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi -V Mindi_Image -no-emul-boot -o $MINDI_CACHE/mindi.iso "
130
131# Mindi set this as default in case it's invoked alone
132BOOT_TYPE="BIOS"
133# and we also check whether we're UEFI or not.
134if [ -d "/sys/firmware/efi" ]; then
135    BOOT_TYPE="UEFI"
136    ISO_OPT="$ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
137    echo "$ISO_CMD" | grep -q "xorriso"
138    if [ $? -eq 0 ]; then
139        ISO_OPT="$ISO_OPT -eltorito-alt-boot --efi-boot images/mindi-bootroot.img -no-emul-boot"
140    fi
141else
142    # Find MBR in case of bootable USB device to build
143    MBRFILE=/usr/lib/syslinux/mbr.bin
144    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
145    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
146    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
147    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
148fi
149
150# Function to log on screen only
151LogScreen() {
152        if [ -e /dev/stderr ] ; then
153        echo -e "$1" >> /dev/stderr
154    elif [ -e /usr/bin/logger ] ; then
155        /usr/bin/logger -s $1
156    fi
157}
158
159# Function to log in log file only
160LogFile() {
161
162    echo -e "$1" >> $LOGFILE
163    if [ _"$2" != _"" ]; then
164        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
165        rm -f "$2"
166    fi
167}
168
169# Function to log in both screen and logfile
170LogAll() {
171    LogScreen "$1"
172    LogFile "$1" "$2"
173}
174
175# Preserved for compatibility
176LogIt() {
177    LogAll "$1" "$2"
178}
179
180# Last function called before exiting
181# Parameter is exit code value
182# Should be declared here as used immediately below potentialy
183MindiExit() {
184    LogFile "INFO: Mindi $MINDI_VERSION is exiting" 
185    LogFile "INFO: End date : `date`" 
186    if [ _"$MONDO_SHARE" != _"" ] ; then
187        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
188        if [ -f $LOGFILE ]; then
189            cat $LOGFILE >> /var/log/mondoarchive.log
190        else
191            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
192        fi
193        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
194    fi
195
196    cd /
197    sync&
198
199    # Clean temporary files only when standalone mindi
200    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
201        rm -Rf $MINDI_TMP
202    fi
203    exit $1
204}
205
206Die() {
207    local i
208    if [ "$1" = "" ] ; then
209        LogAll "FATAL ERROR"
210    else
211        LogAll "FATAL ERROR. $1"
212    fi
213    if [ _"$2" != _"" ]; then
214        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
215    fi
216    rm -f "$2"
217
218    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
219    LogAll "See http://www.mondorescue.org for more information."
220    LogAll "WE CANNOT HELP unless you enclose that file.\n"
221    MindiExit -1
222}
223
224# Now we can create what we need
225MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
226if [ $? -ne 0 ]; then
227    df $TMPDIR
228    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
229fi
230if [ _"$MINDI_TMP" = _"" ]; then
231    Die "MINDI_TMP is empty, aborting"
232fi
233if [ _"$MINDI_TMP" = _"/" ]; then
234    Die "MINDI_TMP is /, aborting"
235fi
236export MINDI_TMP
237
238# ----------------------------------------------------------------------------
239
240
241AbortHere() {
242    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
243    Die "Program is terminating in response to signal received from OS/user"
244}
245
246
247Aborted() {
248    trap SIGHUP SIGTERM SIGTRAP SIGINT
249    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
250    Die "User abort."
251}
252
253
254AddFileToCfgIfExists() {
255    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
256}
257
258
259AddKeyboardMappingFile() {
260    local mappath r included_list included_item i res ii sss
261    mappath=$1
262    KBDEPTH=$(($KBDEPTH+1))
263    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
264    if [ -e "$bigdir/$mappath" ] ; then
265        LogFile "INFO: $mappath already added"
266        return
267    elif [ -d "$bigdir/$mappath" ] ; then
268        echo "Cannot add $mappath: it's a directory. Sorry."
269        return
270    fi
271    LogFile "INFO: Added kbd map $mappath"
272    if [ ! -e "$mappath" ] ; then
273        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
274        if [ ! -e "$mappath" ] ; then
275            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
276            return
277        fi
278    else
279        echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
280    fi
281
282    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
283    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
284        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
285    else
286        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
287    fi
288    for included_item in $included_list ; do
289        if [ ! -e "$included_item" ] ; then
290            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
291            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
292            for ii in $sss ; do
293                [ -e "$ii" ] && AddKeyboardMappingFile $ii
294            done
295        else
296            AddKeyboardMappingFile $included_item
297        fi
298    done
299}
300
301
302CopyDependenciesToDirectory() {
303    local outdir incoming counter d found tdir templog
304    outdir=$1
305    templog=$MINDI_TMP/$$.log
306    mkdir -p $outdir
307    incoming=`ReadLine`
308    counter=$3
309    > $templog
310
311    while [ "$incoming" != "" ] ; do
312        if [ "$3" = "1" ]; then
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        # Non absolute file names should not arrive till here => skipped
317        if [ `echo "$incoming" | cut -c1` != '/' ]; then
318            LogAll "WARNING: Unable to handle $incoming"
319            incoming=`ReadLine`
320            continue
321        fi
322        # no parent directory of incoming should be a link, copy is not possible in that case
323        d=`dirname "$incoming"`
324        found="false"
325        while [ $d != "/" -a $found = "false" ]; do
326            [ -h "$d" ] && found="true"
327            d=`dirname "$d"`
328        done
329        if [ -d "$incoming" -a ! -h "$incoming" ]; then
330            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0 0
331        elif [ -e "$incoming" ] && [ $found = "false" ]; then
332            if [ ! -h "$incoming" ]; then
333                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
334            else
335                tdir=`dirname "$incoming"`
336                if [ ! -e "$outdir/$tdir" ]; then
337                    mkdir -p "$outdir/$tdir"
338                fi
339                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
340            fi
341            # Only uncompress modules if not using udevd
342            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
343                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
344            fi
345            [ -x "$outdir" ] && StripExecutable $outdir
346        fi
347        incoming=`ReadLine`
348    done
349}
350
351
352CountItemsIn() {
353    local r
354    r=0
355    for q in $1 ; do
356        r=$(($r+1))
357    done
358    echo $r
359}
360
361
362DropOptimizedLibraries() {
363    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
364    filelist=$1
365    outdir=$2
366
367    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
368    if [ "$list_of_optimized_libraries" = "" ] ; then
369        return 0
370    fi
371    echo -en "Dropping i686-optimized libraries if appropriate"
372    for optimized_lib_name in $list_of_optimized_libraries ; do
373        echo -en "."
374        reason=""
375        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
376        echo "$vanilla_lib_name" >> $filelist
377        LogFile "INFO: Adding $vanilla_lib_name to filelist"
378        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
379        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
380
381        # This may return multiple files
382        for resolved in `mr-read-all-link $vanilla_lib_name`; do
383            LogFile "INFO: Adding as deps $resolved to filelist"
384            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
385            if [ "$vanilla_resolved_name" != "$resolved" ]; then
386                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
387                rmdir $outdir$resolved > /dev/null 2> /dev/null
388                ln -sf $vanilla_resolved_name $outdir$resolved
389                LogFile "INFO: Excluding deps $resolved" 
390                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
391                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
392                echo "$vanilla_resolved_name" >> $filelist.tmp
393                mv -f $filelist.tmp $filelist
394            fi
395        done
396    done
397    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
398    mv -f $filelist.tmp $filelist
399    echo -e "$DONE"
400}
401
402
403FindAndAddUserKeyboardMappingFile() {
404    local r res mapfile mappath included_item included_list keyfile mp locale
405    LogAll "INFO: Analyzing your keyboard's configuration."
406    KEYDIR=/usr/lib/kbd
407    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
408    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
409    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
410    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
411    if [ ! -e "$KEYDIR" ] ; then
412        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
413        return 0
414    fi
415    if [ -e "/etc/sysconfig/keyboard" ] ; then
416        LogFile "INFO: Red Hat-style config detected."
417        keyfile=/etc/sysconfig/keyboard
418    elif [ -e "/etc/vconsole.conf" ] ; then
419        LogFile "INFO: New Fedora style config detected."
420        keyfile=/etc/vconsole.conf
421    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
422        LogFile "INFO: Slackware-style config detected."
423        keyfile=/etc/rc.d/rc.keymap
424    elif [ -e "/etc/rc.config" ] ; then
425        LogFile "INFO: Debian-style config detected."
426        keyfile=/etc/rc.config
427    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
428        LogFile "INFO: Debian-style config detected."
429        mkdir -p $bigdir/tmp
430        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
431        KBDEPTH=0
432        mkdir -p $bigdir/etc/console
433        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
434        echo ""
435        echo -e "$DONE"
436        return 0
437    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
438        LogFile "INFO: Ubuntu-style config detected."
439        mkdir -p $bigdir/tmp
440        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
441            kbdfile="/etc/console-setup/boottime.kmap.gz"
442        else
443            kbdfile="/etc/console-setup/cached.kmap.gz"
444        fi
445        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
446        KBDEPTH=0
447        mkdir -p $bigdir/etc/console-setup
448        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
449        echo ""
450        echo -e "$DONE"
451        return 0
452    elif [ -e "/etc/rc.conf" ] ; then
453        LogFile "INFO: ArchLinux config detected."
454        keyfile=/etc/rc.conf
455    elif [ -e "/etc/conf.d/keymaps" ] ; then
456        LogFile "INFO: Gentoo-style config detected."
457        keyfile=/etc/conf.d/keymaps
458    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
459        LogFile "INFO: X11-style config detected."
460        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
461    else
462        LogFile "Searching for rc.config ..."
463        keyfile=`find /etc -name rc.config | head -n1`
464        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
465            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
466            return
467        else
468            LogFile "INFO: Found $keyfile"
469        fi
470    fi
471    if [ ! -e "$KEYDIR/keymaps" ] ; then
472        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
473        return
474    fi
475    LogFile "INFO: keyfile=$keyfile"
476    # For SLES we need to remove the .map.gz extension Cf #614
477    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
478    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
479    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
480    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
481    LogFile "INFO: locale=$locale"
482    #
483    # Process the keymaps dir once for all
484    # AddKeyboardMappingFile will use it recursively
485    #
486    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
487    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
488    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
489    # If we have multiple keymaps then log it !!
490    echo "$mp" | grep -q " " >> $LOGFILE
491    if [ $? -eq 0 ]; then
492        LogAll "WARNING: Multiple keymaps found: $mp"
493        LogFile "INFO: The following one will be used"
494    fi
495    for i in $mp ; do
496        mappath=$i
497        [ -e "$i" ] && [ ! -d "$i" ] && break
498    done
499    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
500        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
501    fi
502    LogFile "INFO: mappath = $mappath"
503    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
504        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
505        return
506    fi
507    LogAll "INFO: Adding the following keyboard mapping tables: "
508    mkdir -p $bigdir/tmp
509    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
510    KBDEPTH=0
511    AddKeyboardMappingFile $mappath
512    echo ""
513    echo -e "$DONE"
514    rm -f $MINDI_TMP/keymaps.find
515    return 0
516}
517
518
519FindLdlinux32Binary() {
520    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
521    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
522    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
523    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
524    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
525    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
526    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
527    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
528    if [ ! -e "$LDLINUXC32" ]; then 
529        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
530        LDLINUXC32=/tmp/idoesnthopefullyexist
531    else
532        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
533    fi
534}
535
536
537FindMboot32Binary() {
538    MBOOTC32=/usr/lib/syslinux/mboot.c32
539    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
540    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
541    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
542    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
543    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
544    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
545    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
546    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
547    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
548}
549
550FindLdlinuxe64Binary() {
551    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
552    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
553    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
554    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
555    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
556    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
557    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
558    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
559    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
560}
561
562FindSyslinux64EFI() {
563    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
564    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
565    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
566    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
567    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
568    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
569    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
570    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
571    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
572}
573
574FindIsolinuxBinary() {
575    ISOLINUX=/usr/lib/isolinux.bin
576    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
577    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
578    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
579    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
580    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
581    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
582    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
583    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
584    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
585}
586
587
588GenerateGiantDependencyList() {
589    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item tempdepfile modres noof_lines lvmversion lvmresolved
590
591    echo -en "INFO: Analyzing dependency requirements"
592    outfile=$1
593    tempfile=$MINDI_TMP/$$.txt
594    incoming=`ReadLine`
595
596    > $tempfile
597    progress=0
598    res=0
599    noof_lines=$2
600    while [ "$incoming" != "" ] ; do
601        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
602            incoming=`ReadLine`
603            continue
604        fi
605        if [ "$incoming" = "LVMFILES:" ] ; then
606            break
607        fi
608        filelist=`GenerateListForFile "$incoming"`
609        r=$?
610        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
611        res=$(($res+$r))
612#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
613        for fname in $filelist ; do
614            [ "$fname" != "" ] && echo "$fname" >> $tempfile
615        done
616        progress=$(($progress+1))
617        LogProgress $progress $noof_lines
618        incoming=`ReadLine`
619    done
620    if  [ "$incoming" = "LVMFILES:" ] ; then
621        incoming=`ReadLine`
622        lvmversion=""
623        while [ "$incoming" != "" ] ; do
624            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
625                incoming=`ReadLine`
626                continue
627            fi
628            filelist=`GenerateListForFile "$incoming"`
629            for tool in $filelist ; do
630                lvmresolved=`readlink -f $tool`
631                if [ "$tool" = "$lvmresolved" ]; then
632                    echo "$tool" >> $tempfile
633                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
634                    if [ "$lvmversion" = "" ] ; then
635                        lvmversion=`$lvmresolved`
636                        echo "$lvmresolved" >> $tempfile
637                    fi
638                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
639                    if [ "$lvmversion" = "200" ]; then
640                        # pvdata and lvmcreate_initrd don't exist in LVM2
641                        case "$toolstripped" in
642                        "pvdata")
643                            continue
644                            ;;
645                        "lvmcreate_initrd")
646                            continue
647                            ;;
648                        esac
649                    fi
650                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
651                    if [ -e "$toolpath" ] ; then
652                        echo "$toolpath" >> $tempfile
653                        echo "$tool" >> $tempfile
654                    else
655                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
656                    fi
657                    if [ -e "$toolpath" ] ; then
658                        echo "$toolpath" >> $tempfile
659                        echo "$tool" >> $tempfile
660                    else
661                        echo "Where are your LVM-Tools? Couldn't find $tool"
662                    fi
663                else
664                    echo "$tool" >> $tempfile
665                fi
666            done
667            progress=$(($progress+1))
668            LogProgress $progress $noof_lines
669            incoming=`ReadLine`
670        done
671    fi
672    echo -en "$DONE\nINFO: Making complete dependency list"
673
674    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
675    mv -f $tempfile.new $tempfile
676    > $outfile.pre
677    progress=0
678    noof_lines=`cat $tempfile | wc -l`
679    LogFile "---------------------------------"
680    LogFile "List of dependencies:             "
681    LogFile "---------------------------------"
682    for fname in `cat $tempfile` ; do
683        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
684        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
685        progress=$(($progress+1))
686        LogProgress $progress $noof_lines
687    done
688    if [ _"$MONDO_SHARE" != _"" ]; then
689        mkdir -p $bigdir/tmp
690        mkdir -p $bigdir/usr/bin
691        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
692            LogAll "\nINFO: Incorporating post-nuke tarball"
693            (cd "$bigdir" ; tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log)
694        fi
695        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
696            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
697        else
698            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
699            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
700            LogIt "       If Mindi was called by Mondo then send a bug report."
701            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
702            LogIt "       Finally, run Mindi again."
703            Die "Odd."
704        fi
705        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
706        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
707            LogAll "\nINFO: Incorporating Network-related settings"
708            for r in NETFS-* ; do
709                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
710                LogFile "INFO: Copying $r to ramdisk"
711            done
712        fi
713    fi
714    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
715    rm -f $tempfile $outfile.pre
716    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
717    return $res
718}
719
720
721GenerateListForFile() {
722    local files_found loc fname incoming i res
723    incoming="$1"
724    files_found=""
725    res=0
726
727    for fname in $incoming ; do
728        files_found="$files_found `LocateFile $fname`"
729    done
730
731    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
732}
733
734
735# Returns all disk devices which are part of a raid array
736GetAllRaidMembers() {
737    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
738}
739
740
741GetFileSizeList() {
742    local i
743    for i in `find $1 -type d -o -print` ; do
744        du -sk $i
745    done
746}
747
748
749# Check kernel filesystem capabilites for accessing initrd image
750# Could be ext2 FS (old mode) or initramfs (new mode)
751#
752# Interface definition:
753# param #1: absolute path to kernel image
754GetInitrdFilesystemToUse() {
755
756    # interface test: make sure we have one parameter
757    if [ $# -ne 1 ]; then
758        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
759    fi
760
761    # interface parameters
762    local lvKernelImage=$1
763
764    # local constants (filesystem magic strings)
765    local lcMagicCramfs="<3>cramfs: wrong magic"
766    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
767    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
768    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
769
770    # local variables
771    local lvOffset
772    local lvScanRes
773    local lvUseFilesystem
774
775    # say where we are.
776    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
777
778    # verify that file exists
779    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
780
781    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
782    file $lvKernelImage 2>&1 | grep -q gzip
783    if [ $? -eq 0 ]; then
784        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
785        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
786    else
787        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
788        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
789        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
790        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
791        if [ $lvOffset -eq 0 ]; then
792            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
793            lvScanRes=$lcMagicInitfs
794        else
795            lvOffset=`expr $lvOffset / 2`
796            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
797            # scan again  kernel image
798            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
799        fi
800    fi
801
802    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
803    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
804        lvUseFilesystem="ext2fs"
805    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
806        lvUseFilesystem="ext3fs"
807    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
808        lvUseFilesystem="initramfs"
809    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
810        lvUseFilesystem="cramfs"
811    else
812        # In that case, we are most probably after 2.6.30 and use the supported initramfs
813        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
814        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
815        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
816        lvUseFilesystem="initramfs"
817    fi
818
819    # say what we are using
820    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
821
822    # return file system to use
823    echo "$lvUseFilesystem"
824
825}
826
827# Searches members of raid device
828# $1: raid device (/dev/md...)
829GetRaidDevMembers() {
830    if [ ! -f /etc/raidtab ]; then 
831        return
832    fi
833    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
834}
835
836
837ListAllPartitions() {
838    local res currline partition all_partitions ap_orig remaining i j
839
840    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
841    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
842    if [ -e "/vmfs/volumes" ]; then
843        # For VMWare ESX 3 get the device names of these volumes
844        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
845    fi
846    return
847}
848
849
850ListKernelModulePaths() {
851    local module_list module fname r kern
852    module_list="$MODULES"
853    # Remove unwanted modules from list
854    for i in $DENY_MODS; do
855        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
856    done
857###
858### Sq-Modification ... Use kernelname for module search path if specified
859###
860    if [ "${kernelname}" != "" ]
861    then
862        kern=${kernelname}
863    else
864        kern="$KERVERRUN"
865    fi
866    export KERVER=$kern
867###
868### Sq-Mod End
869###
870    # Get rid of duplicates
871    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
872        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
873        if [ -z "$r" ]; then
874            if [ "`echo "$MODULES" | grep -w $module`" ]; then
875                r="[live module file not found]"
876            else
877                r="[extra module file not found]"
878            fi
879        else
880            [ -f "$r" ] && echo "$r"
881        fi
882        LogFile "INFO: module $module --> $r"
883    done
884    find /lib/modules/$kern/modules.* -type f 2> /dev/null
885}
886
887#
888# Critical function which computes all dependencies (dyn. lib.)
889# for a list of binaries
890#
891LocateDeps() {
892    local incoming fname deps
893    incoming="$*"
894    deps=""
895
896    for fname in $incoming ; do
897        if [ ! -e "$fname" ] ; then
898            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
899            if echo $fname | grep lvm &> /dev/null ; then
900                LogFile "          This warning only affects you if you are using LVM."
901                if echo "$MODULES" | grep lvm &> /dev/null ; then
902                    LogFile "          I think you are, so please take heed!"
903                else
904                    LogFile "          I don't think you are, so don't worry about it."
905                fi
906            fi
907        else
908            deps="$deps $fname" 
909        fi
910    done
911    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
912}
913
914
915LocateFile() {
916    local i j path fname_to_find location output resolved tmp stub cache_id loclist
917    fname_to_find="$1"
918    # It's an absolute path
919    j=`echo "$fname_to_find" | cut -c1`
920    if [ _"$j" = _"/" ]; then
921        dn=`dirname $fname_to_find`
922        # We suppose that the link is already included, just add the new file
923        if [ -h "$dn" ]; then
924            newdn=`readlink -f $dn`
925            bn=`basename $fname_to_find`
926            output="$newdn/$bn"
927        else
928            output="$fname_to_find"
929        fi
930        if [ -h "$output" ] ; then
931            output="`mr-read-all-link $output` $output"
932        fi
933        echo "$output"
934        return 0
935    fi
936    # It's not an absolute path
937    output=""
938    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
939    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
940        [ -h "$path" ] && continue
941        [ ! -e "$path/$fname_to_find" ] && continue
942        output="$path/$fname_to_find $output"
943        if [ -h "$path/$fname_to_find" ] ; then
944            output="`mr-read-all-link $path/$fname_to_find` $output"
945        fi
946    done
947    if [ "$output" = "" ] ; then
948        return 1
949    fi
950    echo "$output"
951    return 0
952}
953
954LogProgress() {
955    local i progress modres noof_lines title
956 
957    progress=$1
958    noof_lines=$2
959    title=$3
960
961    i=$(($progress*100))
962    if [ $noof_lines -ne 0 ]; then
963        i=$(($i/$noof_lines))
964    else
965        i=0
966    fi
967
968    if [ _"$MONDO_SHARE" != _"" ]; then 
969        echo "$title        $i%"
970    else
971        echo -en "\r\t\t\t\t\t\t\t\t"
972        echo -en "$i"
973        echo -en "%"
974        modres=$(($progress%4))
975        [ "$modres" -eq "0" ] && echo -en "\t/"
976        [ "$modres" -eq "1" ] && echo -en "\t-"
977        [ "$modres" -eq "2" ] && echo -en "\t\\"
978        [ "$modres" -eq "3" ] && echo -en "\t|"
979    fi
980}
981
982# Called by MakeBootInitFile, to make /tmp/$MRCFG
983MakeMondoConfigFile() {
984    local outfile use_lzo use_comp use_star
985    outfile=$1
986    > $outfile
987    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
988    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
989    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
990    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
991    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
992    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
993    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
994    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
995    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
996    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
997    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
998    echo "use-lzo $use_lzo" >> $outfile
999    echo "use-gzip $use_gzip" >> $outfile
1000    echo "use-star $use_star" >> $outfile
1001    echo "use-lzma $use_lzma" >> $outfile
1002    echo "use-comp $use_comp" >> $outfile
1003    echo "boot-type $BOOT_TYPE" >> $outfile
1004    echo "datestamp `date`" >> $outfile
1005    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1019
1020    # Deal with network configuration in a portable way
1021    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1022        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1023    fi
1024}
1025
1026# Get PV's for an LV
1027GetPVsForLV() {
1028    if [ -n "$1" ]; then
1029        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1030        if [ -z "$vg" ]; then
1031            return
1032        fi
1033        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1034    fi
1035}
1036
1037
1038MakeMountlist() {
1039    local mountlist all_partitions current_partition \
1040partition_size partition_format outstring partition_number \
1041partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1042absolute_partition old_partition_fmt current_lvolume uname skip
1043
1044    LogFile "------------------------------------"
1045    LogFile "INFO: Your raw fstab file looks like this:"
1046    LogFile "------------------------------------"
1047    cat $MY_FSTAB >> $LOGFILE
1048    LogAll "-----------------------------------"
1049    LogAll "INFO: Your mountlist will look like this:"
1050    LogAll "-----------------------------------"
1051
1052# mountlist(OUT)
1053    mountlist=$1
1054
1055# NB: partition = device
1056# NB: mountpt = where the device is mounted
1057
1058    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1059
1060    [ "$mountlist" != "" ] && rm -Rf $mountlist
1061    > $mountlist
1062    all_partitions=""
1063   
1064    if [ $LVM != "false" ]; then
1065        LogFile "INFO: Analyzing LVM..."
1066        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1067        if [ $? -ne 0 ]; then
1068            LVM="false"
1069        fi
1070        # Excluded LVs and GVs are not reported here
1071        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1072    fi
1073    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1074    for i in $IMAGE_DEVS ; do
1075        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1076    done
1077    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1078    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1079    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1080    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1081    for c_p in $all_partitions ; do
1082        # Skip fd/cd devices, network FS, cifs
1083        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1084        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1085        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1086            current_partition=`readlink -f $c_p`
1087            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1088                current_partition="$c_p"
1089            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1090                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1091                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1092            fi
1093            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1094        else
1095            current_partition="$c_p"
1096        fi
1097        [ "$c_p" = "none" ] && continue
1098        redhat_label=""
1099        label=""
1100        uuid=""
1101        absolute_partition=`readlink -f $c_p`
1102        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1103
1104        # set default in case we dont't find it
1105        str_to_find_fmt_with=$current_partition
1106
1107        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1108        # current_partition contains only first column of /etc/fstab
1109        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1110            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1111            actual_dev=""
1112
1113            # 1st try, findfs - the RHEL way of finding labels and their partitions
1114            if [ -x "/sbin/findfs" ]; then
1115                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1116            fi
1117   
1118            # 2nd try : blkid, the good way for all LABEL except swap
1119            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1120                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1121                # For LVM FS it will give a /dev/dm-# which should then be converted
1122                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1123                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1124                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1125                    for dev in `ls /dev/mapper/*`; do
1126                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1127                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1128                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1129                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1130                            break
1131                        fi
1132                    done
1133                fi
1134            fi
1135   
1136            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1137            # For LVM gives a /dev/mapper entry
1138            if [ "x$actual_dev" = "x" ]; then
1139                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1140            fi
1141   
1142            # 4th try, with vol_id
1143            # SWAP only
1144            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1145                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1146                for dev_swap in $list_swaps ; do
1147                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1148                    if [ "x$dev_exists" != "x" ]; then
1149                        actual_dev=$dev_swap
1150                        break;
1151                    fi
1152                done
1153            fi
1154
1155            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1156            # LABEL=SW-cciss/c0d0p3 (RDP)
1157            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1158            # SWAP only
1159            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1160                    skip=""
1161                    uname=$KERVERRUN
1162                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1163                    # 2.6.12 needs 16 (FC3)
1164                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1165                    # 2.6.19 and upper needs 1052
1166                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1167                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1168                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1169                    if [ $skip = "" ]; then
1170                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1171                    fi
1172                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1173                    do
1174                        # Location of the swap label for kernel 2.6
1175                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1176                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1177                            actual_dev=$try_dev
1178                        fi
1179                    done
1180            fi
1181
1182            # Check if one of all those tries has known success
1183            if [ "x$actual_dev" != "x" ]; then
1184                current_partition=$actual_dev
1185            else
1186                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1187            fi
1188        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1189        # current_partition contains only first column of /etc/fstab
1190        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1191            uuid=`echo "$current_partition" | cut -d'=' -f2`
1192            actual_dev=""
1193
1194            # 1st try, findfs - the RHEL way of finding labels and their partitions
1195            if [ -x "/sbin/findfs" ]; then
1196                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1197            fi
1198   
1199            # 2nd try : blkid, the good way for all UUID except swap
1200            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1201                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1202                # For LVM FS it will give a /dev/dm-# which should then be converted
1203                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1204                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1205                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1206                    for dev in `ls /dev/mapper/*`; do
1207                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1208                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1209                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1210                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1211                            break
1212                        fi
1213                    done
1214                fi
1215            fi
1216   
1217            # 3th try, with vol_id
1218            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1219                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1220                for dev in $list_dev ; do
1221                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1222                    if [ "x$dev_exists" != "x" ]; then
1223                        actual_dev=$dev
1224                        break;
1225                    fi
1226                done
1227            fi
1228
1229            # 4th try, with dumpuuid (VMWare only ?) for swap
1230            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1231                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1232                for dev in $list_dev ; do
1233                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1234                    if [ "x$dev_exists" != "x" ]; then
1235                        actual_dev=$dev
1236                        break;
1237                    fi
1238                done
1239            fi
1240
1241            # Check if one of all those tries has known success
1242            if [ "x$actual_dev" != "x" ]; then
1243                current_partition=$actual_dev
1244            else
1245                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1246            fi
1247        else
1248            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1249            # they use symlinks in fstab unrelated to what is shown in mount !
1250            if [ _"$partition_mountpt" = _"" ]; then
1251                # set default in case we dont't find it
1252                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1253                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1254                            str_to_find_fmt_with=$tmpp
1255                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1256                            break;
1257                        fi
1258                done
1259            fi
1260        fi
1261
1262        # Detects noauto partitions not mounted and exclude them
1263        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1264        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1265                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1266            continue
1267        fi
1268        # Detects bind partitions and exclude them
1269        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1270                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1271            continue
1272        fi
1273
1274        # Look for devices which have to be excluded
1275        skip=0
1276        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1277            l=""
1278            list_of_devices="`mr-read-all-link $current_partition`"
1279            for d in $list_of_devices; do
1280                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1281            done
1282
1283            # Remove PVs from LVs excluded
1284            l="$l `GetPVsForLV $current_partition`"
1285
1286            # We want a single unique list
1287            list_of_devices="`echo $l | tr ' ' '\n' | sort -u`"
1288
1289            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1290                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1291                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1292                    skip=1
1293                    continue
1294                fi
1295            done
1296        fi
1297        if [ $skip -eq 1 ]; then
1298            continue
1299        fi
1300
1301        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1302        # Detects iso9660 ISO images and exclude them
1303        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1304                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1305            continue
1306        fi
1307        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1308        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1309        # the former is then a link to the latter, so we test whether
1310        # $current_partition is actually such a link or not and set
1311        # $current_lvolume accordingly. On Debian you may find more than one answer
1312        # so we remove the one corresponding to /dev/.static
1313        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1314        # principle is the same and we need to find the link to it as well.
1315        # Note that $current_lvolume may well be an
1316        # ordinary device. It is just to make sure that we feed the right value
1317        # into any of the LVM tools if possible.
1318
1319        current_lvolume="$current_partition"
1320        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1321            # .static dir are a Debian specificity
1322            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1323            echo $current_lvolume | grep -q ' '
1324            if [ $? -eq 0 ]; then
1325                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1326            fi
1327            # if it's not found, it may well be a real device such as a multipath one
1328            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1329            if [ _"$current_lvolume" = _"" ]; then
1330                current_lvolume="$current_partition"
1331            fi
1332        fi
1333        #
1334        # End of LVM device style variation code (other than $current_lvolume).
1335
1336        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1337            # Size computed via LVM not directly
1338            partition_size="lvm"
1339        else
1340            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1341            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1342            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1343                # Skip swap files
1344                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1345                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1346                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1347                [ "$partition_format" != "swap" ] && partition_format="swap"
1348                if [ "$partition_size" = "" ] ; then
1349                    totalsize=0
1350                    items=0
1351                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1352                        totalsize=$(($totalsize+$i))
1353                        items=$(($items+1))
1354                    done
1355                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1356                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1357                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1358                fi
1359            else
1360                partition_size=`SizeOfPartition $current_partition`
1361            fi
1362        fi
1363        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1364        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1365        if [ "$partition_mountpt" = "" ] ; then
1366            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1367                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1368                    partition_mountpt="raid"
1369                    partition_format="raid"
1370                else
1371                    partition_mountpt="lvm"
1372                    partition_format="lvm"
1373                fi
1374            fi
1375        fi
1376        psz=$partition_size
1377        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1378        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1379        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1380            partition_mountpt="image"
1381            old_partition_fmt=$partition_format
1382            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1383            partition_size=$(($partition_size+1)); # just in case
1384            if [ "$partition_format" = "Linux" ] ; then
1385                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1386                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1387                partition_format=$old_partition_fmt
1388            fi
1389        fi
1390
1391        if [ ! "$partition_mountpt" ] ; then
1392            LogFile "------- $FDISK -l $qq log ------------"
1393            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1394                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1395                [ "$partition_format" ] && break
1396            done
1397            LogFile "------- $FDISK log end ------------"
1398            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1399                partition_format="compaq"
1400            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1401                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1402                continue
1403            fi
1404        fi
1405        if [ "$redhat_label" ]; then
1406            label="$redhat_label"
1407        elif [ "$uuid" ]; then
1408            label="$uuid"
1409        fi
1410
1411        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1412        # in order to mount the root part e.g. in grub.
1413        # One way to solve this is to add the UUID now, if there wasn't one so it's
1414        # restored correctly
1415        if [ _"$label" = _"" ]; then
1416            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1417        fi
1418
1419        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1420        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1421        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1422        if [ "$current_partition" = "" ] ; then
1423            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1424        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1425            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1426                partition_mountpt=raid
1427                partition_format=raid
1428                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1429                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1430            else
1431                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1432            fi
1433        elif [ "$partition_format" = "" ] ; then
1434            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1435        elif [ "$partition_size" = "" ] ; then
1436            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1437        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1438            continue
1439        else
1440            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1441            LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1442                partition_format="vfat"
1443            fi
1444            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1445            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1446        fi
1447    done
1448    LogAll "-----------------------------------" 
1449}
1450
1451CheckMountlist() {
1452    local file=$1
1453    # Coherency verification
1454    ML01=`cat $file | wc -l`
1455    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1456    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1457    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1458    if [ "$ML01" -ne "$ML1" ]; then
1459        LogFile "--------------------------------------------"
1460        LogAll "WARNING: Duplicate device entry in mountlist"
1461        LogFile "--------------------------------------------"
1462    fi
1463    if [ "$ML02" -ne "$ML2" ]; then
1464        LogFile "--------------------------------------------"
1465        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1466        LogFile "------------------------------------------------"
1467    fi
1468}
1469
1470
1471MakeISOErrors() {
1472
1473LogFile "----------- $ISO_CMD's errors --------------"
1474LogAll "$ISO_CMD returned the following errors:"
1475cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1476LogAll "ERROR: Failed to create ISO image."
1477}
1478
1479MakeBootableDevice() {
1480
1481local target tbc retval part size mount_opt
1482
1483target="$1"
1484
1485rm -Rf $MINDI_TMP/target
1486mkdir -p $MINDI_TMP/target/{images,archives,tmp}
1487
1488LogAll "INFO: Copying $MINDI_CACHE/*.gz to $MINDI_TMP/target/images"
1489cp -f $MINDI_CACHE/*.gz $MINDI_TMP/target/images 2>> $LOGFILE || LogAll "WARNING: MakeBootableDevice: Cannot copy files to $MINDI_TMP/target/images"
1490for i in memdisk memtest.bin memtest.img ; do
1491    j=$MINDI_LIB/$i
1492    k=$MINDI_TMP/target
1493    if [ -e "$j" ] ; then
1494        LogAll "INFO: Copying $j to $k"
1495        cp -f $j $k 2>> $LOGFILE || LogAll "Failed to copy $j to $k"
1496        cp -f $j $MINDI_TMP 2>> $LOGFILE || LogAll "Failed to copy $j to $MINDI_TMP"
1497        if [ _"$MONDO_SHARE" != _"" ]; then 
1498            cp -f $j $MONDO_ROOT 2>> $LOGFILE || LogAll "Failed to copy $j to $MONDO_ROOT"
1499        fi
1500    fi
1501done
1502
1503retval=0
1504LogAll "INFO: Copying $kernelpath to $MINDI_TMP/target/vmlinuz"
1505cp $kernelpath $MINDI_TMP/target/vmlinuz 2>> $LOGFILE
1506if [ $? -ne 0 ] ; then
1507    LogAll "ERROR: Failed to copy $kernelpath $MINDI_TMP/target/"
1508    retval=$(($retval+1))
1509fi
1510LogAll "INFO: Copying $MINDI_TMP/initrd.img to $MINDI_TMP/target/initrd.img"
1511cp $MINDI_TMP/initrd.img $MINDI_TMP/target/ 2>> $LOGFILE
1512if [ $? -ne 0 ] ; then
1513    LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MINDI_TMP/target/"
1514    retval=$(($retval+1))
1515fi
1516
1517# copy boot stuff now generated in PrepareDataDiskImage
1518if [ "$BOOT_TYPE" = "UEFI" ]; then
1519    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1520    tbc="EFI"
1521    # Also prepare a BIOS compatible boot
1522    if  [ "$target" = "ISO" ]; then
1523        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1524    fi
1525else
1526    (cd $MINDI_TMP/target ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1527    tbc="syslinux"
1528    if [ -f "$MINDI_TMP/target/$tbc/syslinux.cfg" ]; then
1529        LogFile "----------- syslinux's conf --------------"
1530        cat $MINDI_TMP/target/$tbc/syslinux.cfg >> $LOGFILE
1531        LogFile "------------------------------------------"
1532    fi
1533    if  [ "$target" = "ISO" ]; then
1534        cp $ISOLINUX $MINDI_TMP/target/$tbc/ 2>> $LOGFILE
1535        if [ $? -ne 0 ] ; then
1536            LogAll "ERROR: Failed to copy $ISOLINUX to $MINDI_TMP/target/$tbc"
1537            retval=$(($retval+1))
1538        fi
1539    fi
1540fi
1541
1542if [ "$ARCH" != "ia64" ] ; then
1543    if [ $KERNEL_IS_XEN = "yes" ]; then
1544        FindMboot32Binary
1545        cp $xenkernelpath $MINDI_TMP/target/xen.gz 2>> $LOGFILE
1546        if [ $? -ne 0 ] ; then
1547            LogAll "ERROR: Failed to copy $xenkernelpath to $MINDI_TMP/target/"
1548            retval=$(($retval+1))
1549        fi
1550        cp $MBOOTC32 $MINDI_TMP/target/$tbc/mboot.c32  2>> $LOGFILE
1551        if [ $? -ne 0 ] ; then
1552            LogAll "ERROR: Failed to copy $MBOOTC32 to $MINDI_TMP/target/$tbc"
1553            retval=$(($retval+1))
1554        fi
1555    fi
1556fi
1557
1558MakeMessageFile $MINDI_TMP/target/$tbc | cut -c1-80 > $MINDI_TMP/target/$tbc/message.txt
1559
1560if [ _"$MONDO_SHARE" != _"" ]; then 
1561    cp -rf $MINDI_TMP/target/$tbc $MONDO_ROOT 2>> $LOGFILE
1562    if [ $? -ne 0 ] ; then
1563        LogAll "ERROR: Failed to copy $MINDI_TMP/target/$tbc to $MONDO_ROOT"
1564        LogAll "       Please check the target directory."
1565        retval=$(($retval+1))
1566    fi
1567    if [ $KERNEL_IS_XEN = "yes" ]; then
1568        cp -f $MINDI_TMP/target/xen.gz $MONDO_ROOT 2>> $LOGFILE
1569        if [ $? -ne 0 ] ; then
1570            LogAll "ERROR: Failed to copy $MINDI_TMP/target/xen.gz to $MONDO_ROOT"
1571            LogAll "       Please check the target directory."
1572            retval=$(($retval+1))
1573        fi
1574    fi
1575    cp -f $MONDO_SHARE/autorun $MINDI_TMP/target 2>> $LOGFILE
1576    cp -f $MINDI_TMP/target/vmlinuz $MONDO_ROOT 2>> $LOGFILE
1577    if [ $? -ne 0 ] ; then
1578        LogAll "ERROR: Failed to copy $MINDI_TMP/vmlinuz to $MONDO_ROOT"
1579        LogAll "       Please check the target directory."
1580        retval=$(($retval+1))
1581    fi
1582    cp -f $MINDI_TMP/target/initrd.img $MONDO_ROOT 2>> $LOGFILE
1583    if [ $? -ne 0 ] ; then
1584        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $MONDO_ROOT"
1585        LogAll "       Please check the target directory."
1586        retval=$(($retval+1))
1587    fi
1588fi
1589
1590if [ -f "$MINDI_TMP/$MRCFG" ]; then
1591    cp -f $MINDI_TMP/$MRCFG $MINDI_TMP/target/tmp
1592fi
1593
1594LogFile "----------- target dir content -----------"
1595LogFile "------------------------------------------"
1596ls -lR $MINDI_TMP/target >> $LOGFILE
1597LogFile "------------------------------------------"
1598LogFile "----------- target dir sizes -------------"
1599du -sk $MINDI_TMP/target/* >> $LOGFILE
1600LogFile "------------------------------------------"
1601
1602if [ "$retval" -ne "0" ] ; then
1603    LogFile "--------------------------------"
1604    LogFile "INFO: Size of $MINDI_TMP/target:"
1605    du -sk $MINDI_TMP/target/* >> $LOGFILE
1606    LogFile "--------------------------------"
1607    echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1608    umount $MINDI_TMP/target
1609    LogAll "ERROR: Problems while creating boot media."
1610    LogAll "       Please unload some of your modules and try again."
1611    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1612fi
1613
1614mkdir -p $MINDI_TMP/mpt
1615
1616if  [ "$target" = "USB" ]; then
1617    LogAll "INFO: Transforming $USBDEVICE in a Bootable device"
1618    LogAll "INFO: Checking $USBDEVICE"
1619    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1620    if [ $? -ne 0 ]; then
1621        LogAll "ERROR: Unable to access $USBDEVICE"
1622        LogAll "       Make sure your USB device is plugged in"
1623        MindiExit -1
1624    fi
1625    # Some distro do auto mount at that point (Ubuntu)
1626    LogAll "INFO: Unmounting $USBPART just in case"
1627    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1628    if [ "$BOOT_TYPE" = "BIOS" ]; then
1629        # If your key has no MBR it may cause an issue
1630        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1631        if [ -r $MBRFILE ]; then
1632            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1633            dd if=$MBRFILE of=$USBDEVICE >> $LOGFILE 2>> $LOGFILE
1634        else
1635            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1636            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1637        fi
1638    fi
1639    LogAll "INFO: Preparing $USBDEVICE"
1640    cat > $MINDI_TMP/fdisk.txt << EOF
1641d
1642d
1643d
1644d
1645n
1646p
16471
1648
1649
1650t
1651b
1652a
16531
1654w
1655EOF
1656    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1657    if [ $? -ne 0 ]; then
1658        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1659        LogAll "       Make sure your USB device is plugged in"
1660        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1661        MindiExit -1
1662    fi
1663    LogFile "fdisk build file"
1664    LogFile "----------------"
1665    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1666    LogFile "----------------"
1667    rm -f $MINDI_TMP/fdisk.txt
1668    LogAll "INFO: The USB device $USBDEVICE now looks like this:"
1669    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1670    # Calling kpartx in case devices were not created
1671    if [ -x "/sbin/kpartx" ]; then
1672        /sbin/kpartx -a $USBDEVICE
1673    fi
1674    # Some distro do auto mount at that point (Ubuntu)
1675    LogAll "INFO: Unmounting $USBPART just in case again"
1676    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1677    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1678    if [ "`which dmsetup`" != "" ]; then
1679        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1680        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1681            LogAll "INFO: Removing $block_id from device mapper."
1682            sleep 1
1683            dmsetup remove $block_id
1684        fi
1685    fi
1686    part=$USBPART
1687    mount_opt=""
1688else
1689    # ISO image
1690    part=$MINDI_TMP/mindi-bootroot.img
1691    size=`du -sk $MINDI_TMP/target 2> /dev/null | cut -f1`
1692    # Adds 10 MB to allow for additional space
1693    size=$(($size+10000))
1694    LogAll "INFO: Creating a $size KB empty file for boot device of the ISO image"
1695    dd if=/dev/zero of=$part bs=1k count=$size &> /dev/null || Die "Cannot dd blank $part"
1696    mount_opt="-o loop"
1697fi
1698
1699LogAll "INFO: Creating a vfat filesystem on $part"
1700
1701mkfs.vfat $part 2>&1 >> $LOGFILE
1702if [ $? -ne 0 ]; then
1703    LogAll "ERROR: Unable to create a vfat filesystem on $part"
1704    if  [ "$target" = "USB" ]; then
1705        LogAll "       Make sure your USB device is plugged in and partitioned ($part must exist on it)"
1706        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1707    fi
1708    MindiExit -1
1709fi
1710LogAll "INFO: Mounting $part on $MINDI_TMP/mpt"
1711mount -t vfat $mount_opt $part $MINDI_TMP/mpt 2>> $LOGFILE
1712if [ $? -ne 0 ]; then
1713    LogAll "ERROR: Unable to mount $part on $MINDI_TMP/mpt"
1714    if  [ "$target" = "USB" ]; then
1715        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($part must exist on it)"
1716        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1717    fi
1718    MindiExit -1
1719fi
1720
1721LogAll "INFO: Moving boot info on $MINDI_TMP/mpt"
1722mv $MINDI_TMP/target/* $MINDI_TMP/mpt
1723if [ $? -ne 0 ] ; then
1724    LogFile "--------------------------------"
1725    LogFile "INFO: Size of $MINDI_TMP/mpt:"
1726    du -sk $MINDI_TMP/mpt/* >> $LOGFILE
1727    LogFile "--------------------------------"
1728    umount $MINDI_TMP/mpt
1729    LogAll "ERROR: Problems while creating boot media."
1730    LogAll "       Please unload some of your modules and try again."
1731    Die    "       Try to increase EXTRA_SPACE in $MINDI_CONFIG"
1732fi
1733
1734if  [ "$target" = "ISO" ]; then
1735    # ISO
1736    if [ "$ARCH" != "ia64" ] ; then
1737        CMD="$ISO_CMD $ISO_OPT -b $tbc/isolinux.bin -c $tbc/boot.cat -U -boot-load-size 4 -boot-info-table"
1738    else
1739        CMD="$ISO_CMD $ISO_OPT -b images/mindi-bootroot.img -c images/boot.cat"
1740    fi
1741    LogAll "INFO: Invoking $CMD"
1742    (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1743    if [ $? -ne 0 ] ; then
1744        if [ "$BOOT_TYPE" = "UEFI" ]; then
1745            CMD=`echo $CMD | perl -p -e 's|--efi-boot |-eltorito-platform 0xEF -eltorito-boot |; s|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |;'`
1746            LogAll "INFO: Invoking instead $CMD"
1747            (cd "$MINDI_TMP/mpt" ; $CMD .) > /dev/null 2> $MINDI_TMP/mkisofs.log
1748            if [ $? -eq 0 ] ; then
1749                LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1750            else
1751                MakeISOErrors
1752            fi
1753        else
1754            MakeISOErrors
1755        fi
1756    else
1757        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1758    fi
1759    rm -f $MINDI_TMP/mkisofs.log
1760fi
1761
1762umount $MINDI_TMP/mpt || Die "Unable to unmount $MINDI_TMP/mpt"
1763
1764if  [ "$target" = "ISO" ]; then
1765    # ISO
1766    if [ "$BOOT_TYPE" = "BIOS" ]; then
1767        # syslinux should be run on a local file (doen't work through NFS Cf: #297)
1768        # and run after the formating for versions > 6 it seems
1769        syslinux $part >> $LOGFILE 2>> $LOGFILE
1770    fi
1771    cp $part $MINDI_CACHE
1772else
1773    # USB
1774    if [ "$ARCH" != "ia64" ] ; then
1775        syslinux -v 2>&1 | grep -q 4.02
1776        if [ $? -eq 0 ]; then
1777            # This buggy version of syslinux requires a call to --stupid and not -s
1778            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1779            res=$?
1780        else
1781            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1782            res=$?
1783        fi
1784        if [ $res -ne 0 ] ; then
1785            LogAll "----------- syslinux's errors --------------"
1786            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1787            LogAll "------------------------------------------"
1788            LogIt "ERROR: Failed to create USB image."
1789        else
1790            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1791        fi
1792        rm -f $MINDI_TMP/syslinux.log
1793    else
1794        LogAll "ERROR: No USB boot support for ia64"
1795        MindiExit -1
1796    fi
1797fi
1798}
1799
1800
1801OfferToMakeBootableUSB() {
1802
1803local i files
1804
1805if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1806    echo -en "\nShall I make a bootable USB device ? (y/[n]) "
1807    read i
1808    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1809    if [ "$USBDEVICE" = "" ]; then
1810        echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1811        read dev
1812        USBDEVICE=$dev
1813    fi
1814    echo "WARNING: This will erase all content on $USBDEVICE"
1815    echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1816    read i
1817    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1818else
1819    if [ "$PROMPT_MAKE_USB_IMAGE" = "no" ] && [ _"$MONDO_SHARE" = _"" ] && [ "$USBDEVICE" = "" ]; then
1820        Die "No USBDEVICE environment variable declared, aborting"
1821    fi
1822fi
1823USBPART="${USBDEVICE}1"
1824
1825MakeBootableDevice USB
1826}
1827
1828
1829OfferToMakeBootableISO() {
1830
1831local i files
1832
1833if [ -z "$ISO_CMD" ]; then
1834    LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1835    return
1836fi
1837
1838if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1839    echo -en "\nShall I make a bootable CD image? (y/[n]) "
1840    read i
1841    [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1842fi
1843
1844MakeBootableDevice ISO
1845
1846}
1847
1848
1849MakeMessageFile() {
1850   
1851    if [ -x "/bin/lsb_release" ]; then
1852        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1853    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1854        DESC="Arch Linux"
1855        if [ -r /var/log/pacman.log ]; then
1856            # there are no releases but we can get the last system upgrade
1857            # Output example:   Arch Linux [2011-03-03 01:39]
1858            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1859        fi
1860    elif [ -x "/etc/os-release" ]; then
1861        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1862    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1863        # For pb >= 0.9.8
1864        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1865    elif [ -r /etc/issue.net ]; then
1866        DESC=`head -1 /etc/issue.net`
1867    elif [ -r /etc/issue ]; then
1868        DESC=`head -1 /etc/issue`
1869    else
1870        DESC="Unknown desc"
1871    fi
1872    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1873    if [ _"$MONDO_SHARE" != _"" ]; then
1874        if [ "$CDRECOVERY" != "yes" ] ; then
1875            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1876                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1877                echo -en "$BOOT_MEDIA_MESSAGE"
1878            elif [ ! "$MINDI_TMP" ] ; then
1879                echo -en "FYI, this is _not_ a MondoRescue CD.\n"
1880                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1881                    echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1882                fi
1883            else
1884                echo -en "$BOOT_MEDIA_MESSAGE"
1885            fi
1886        else
1887            echo -en "\
1888To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1889CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1890        fi
1891    fi
1892
1893    # Also create the other help screens
1894    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1895    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1896    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1897}
1898
1899
1900MakeBootConfFile() {
1901    local options i ooo
1902    options=""
1903    # Type of boot file (elilo or syslinux/isolinux)
1904    type=$1
1905    if [ "$type" = "elilo" ]; then
1906        sep="="
1907        sepdef="="
1908    else
1909        sep=" "
1910        sepdef=" "
1911        if [ "$type" = "grub" ]; then
1912            sepdef="="
1913        fi
1914    fi
1915
1916    # Generic header for conf file
1917    if [ "$type" = "elilo" ]; then
1918        echo -en "prompt\n"
1919    elif [ "$type" = "grub" ]; then
1920        echo -en "pause Press a key when ready to restore\n"
1921    elif [ "$type" = "grub2" ]; then
1922        echo -en "set "
1923    else
1924        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1925    fi
1926
1927    # Compute which default option to boot from
1928    echo -en "default${sepdef}"
1929    if [ "$CDRECOVERY" = "yes" ] ; then
1930        if [ "$type" = "grub" ]; then
1931            # TODO: Which num ???
1932            echo -en "0\n"
1933        else
1934            echo -en "RESTORE\n"
1935        fi
1936    # In case it's mondoarchive
1937    elif [ _"$MONDO_SHARE" != _"" ]; then
1938        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1939            if [ "$type" = "grub" ]; then
1940                echo -en "3\n"
1941            else
1942                echo -en "iso\n"
1943            fi
1944        else
1945            if [ "$type" = "grub" ]; then
1946                echo -en "1\n"
1947            else
1948                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1949            fi
1950        fi
1951    else
1952        if [ "$type" = "grub" ]; then
1953            echo -en "0\n"
1954        else
1955            echo -en "expert\n"
1956        fi
1957    fi
1958
1959    # Handle timeout
1960    if [ "$type" = "grub" ]; then
1961        sep='='
1962    fi
1963    if [ "$CDRECOVERY" != "yes" ] ; then
1964        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1965    else
1966        echo -en "timeout${sep}10000\n"
1967    fi
1968    echo -en "\n"
1969
1970    # prepare which labels will be generated
1971    if [ "$CDRECOVERY" = "yes" ] ; then
1972        options="RESTORE expert"
1973    else
1974        if [ _"$MONDO_SHARE" != _"" ]; then
1975            options="interactive expert compare iso nuke isonuke"
1976        else
1977            options="expert"
1978        fi
1979    fi
1980
1981    # Generate rest of conf file
1982    for i in $options ; do
1983        ooo=$i
1984        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1985        if [ "$type" = "elilo" ]; then
1986            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1987        elif [ "$type" = "grub" ]; then
1988            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
1989        elif [ "$type" = "grub2" ]; then
1990            outstr="menuentry '$i' {\n\tinsmod all_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod part_gpt\n\tinsmod ext2\n\tinsmod xfs\n\techo 'Loading kernel...'\n\tlinux /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\techo 'Loading ramdisk...'\n\tinitrd /initrd.img\n}\n"
1991        else
1992            ps="/"
1993            if [ $KERNEL_IS_XEN = "no" ]; then
1994                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1995            else
1996                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1997            fi
1998        fi
1999        echo -en "$outstr"
2000    done
2001    if [ -e "$MINDI_LIB/memtest.img" ] ; then
2002        if [ "$type" = "elilo" ]; then
2003            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
2004            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
2005        elif [ "$type" = "grub" ]; then
2006            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
2007        elif [ "$type" = "grub2" ]; then
2008            echo -en "menuentry 'memtest' {\n\tload_video\n\tinsmod gzio\n\tinsmod part_msdos\n\tinsmod xfs\n\tlinux /memtest\n\tinitrd /memtest.img\n}\n"
2009        else
2010            ps="/"
2011            if [ "$type" = "syslinux" ]; then
2012                ps=""
2013            fi
2014            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
2015            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
2016        fi
2017    fi
2018}
2019
2020ParseModprobeForIncludes() {
2021local MODPROBE_CONF mpincfile includes include
2022
2023MODPROBE_CONF=/etc/modprobe.conf
2024mpincfile=$1
2025touch $mpincfile
2026if [ -a $MODPROBE_CONF ]; then
2027    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2028    if [ -n "$includes" ]; then
2029        for include in $includes
2030        do
2031            if [ -a "$include" ]; then
2032                echo $include >> $mpincfile
2033            fi
2034        done
2035    fi
2036fi
2037}
2038
2039
2040PrepareDataDiskImages() {
2041    local needlist bigdir diskdir res i j k lines lfiles includefile
2042
2043    rm -f $MINDI_CACHE/mindi.iso
2044    needlist=$MINDI_TMP/what-we-need.txt
2045    bigdir=$MINDI_TMP/bigdir
2046    mkdir -p $bigdir/usr/bin
2047    mkdir -p $bigdir/usr/sbin
2048    includefile=$MINDI_TMP/$$.includefile.txt
2049
2050    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2051    if [ -e "$DEPLIST_FILE" ]; then
2052        lfiles="$DEPLIST_FILE $lfiles"
2053    fi
2054    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2055    ParseModprobeForIncludes $includefile
2056    lines=$(($lines+`cat $includefile | wc -l`))
2057    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2058    res=$?
2059    rm -f $includefile
2060    ListKernelModulePaths >> $needlist
2061    if [ "$res" -ne "0" ] ; then
2062        Die "You have $res files present in dependency list\nbut absent from filesystem."
2063    fi
2064    mkdir -p $bigdir/tmp
2065    if [ _"$MONDO_SHARE" != _"" ]; then
2066        # TODO: no reason to have the cfg file stored twice
2067        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2068        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2069    fi
2070
2071    # Needs to be done after the MRCFG creation
2072    FindAndAddUserKeyboardMappingFile
2073
2074    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2075    DropOptimizedLibraries $needlist $bigdir
2076    echo -en "INFO: Assembling dependency files"
2077
2078    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist` 1
2079    echo -e "$DONE"
2080
2081    # also copy io.sys and msdos.sys, if we can find them
2082    for i in `mount | cut -d' ' -f3` ; do
2083        for j in io.sys msdos.sys ; do
2084            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2085        done
2086    done
2087
2088    # master boot record, too
2089    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2090    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2091        LogAll "INFO: Backing up $i's MBR"
2092        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2093        sleep 1
2094        sync
2095        j=$i
2096        [ -h "$j" ] && j=`readlink -f $j`
2097        LogAll "INFO: Creating /dev/boot_device ($j)"
2098        mkdir -p $bigdir/dev
2099        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2100    fi
2101
2102    # Get terminfo content
2103    ti="usr/share/terminfo/l"
2104    if [ -d /$ti ]; then
2105        mkdir -p $bigdir/$ti
2106        cp -Rdf /$ti/* $bigdir/$ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2107    fi
2108    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2109        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2110        [ $? -ne 0 ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2111    fi
2112    if [ -d "/lib/dev-state" ]; then 
2113        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2114    fi
2115    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2116    MakeMountlist $MINDI_TMP/mountlist.txt
2117    CheckMountlist $MINDI_TMP/mountlist.txt
2118    mkdir -p $bigdir/tmp
2119    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2120    if [ _"$MONDO_SHARE" != _"" ]; then
2121        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2122    fi
2123    if [ $LVM != "false" ]; then
2124        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2125        if [ $? -ne 0 ]; then
2126            LVM="false"
2127            rm -f $bigdir/tmp/i-want-my-lvm
2128        else
2129            LogFile "Your i-want-my-lvm file content is:"
2130            LogFile "-----------------------------------"
2131            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2132            LogFile "-----------------------------------"
2133        fi
2134    fi
2135    LogFile "INFO: Your mountlist.txt file content is:"
2136    LogFile "-----------------------------------"
2137    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2138    LogFile "-----------------------------------"
2139
2140    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2141    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2142    if [ _"$MONDO_SHARE" != _"" ]; then
2143        for q in filelist.full.gz biggielist.txt ; do
2144            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2145            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2146        done
2147    fi
2148
2149    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2150    # to get it on the media (in addition to the boot part
2151    # and also to support UEFI boot mechanism
2152    bootdir=$bigdir/syslinux
2153    bootconf="$bootdir/syslinux.cfg"
2154    boottype=syslinux
2155    mkdir -p $bootdir
2156    FindLdlinux32Binary
2157    if [ "$BOOT_TYPE" != "BIOS" ]; then
2158        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2159            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2160            MindiExit -1
2161        fi
2162        # EFI or UEFI
2163        # TODO: names are hard-coded for now
2164        if [ "$BOOT_TYPE" = "UEFI" ]; then
2165            # UEFI
2166            efidir=$bigdir/EFI/BOOT
2167            # On RHEL6 grub works
2168            dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2169            dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2170            if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2171                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2172                bootconf="$efidir/grub.conf"
2173                boottype=grub
2174            elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2175                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2176                bootconf="$efidir/grub.conf"
2177                boottype=grub2
2178            elif [ $dname = "debian" ] && [ $dver = "8" ]; then
2179                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2180                bootconf="$efidir/grub.cfg"
2181                boottype=grub2
2182            else
2183                # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2184                FindSyslinux64EFI
2185                bootbin=$SYSLINUX64EFI
2186                bootconf="$efidir/syslinux.cfg"
2187            fi
2188        else
2189            # EFI
2190            efidir=$bootdir
2191            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2192            boottype=elilo
2193            bootconf="$efidir/elilo.conf"
2194        fi
2195        LogAll "INFO: Found $boottype boot type"
2196
2197        # Copy it so that CD-ROM menu entry is satisfied
2198        mountefi=0
2199        df -T | grep /boot/efi | grep -qE 'vfat'
2200        if [ $? -ne 0 ]; then
2201            mount /boot/efi
2202            if [ $? -ne 0 ]; then
2203                echo "ERROR: You have to mount your (U)EFI partition when using mindi"
2204                MindiExit -1
2205            fi
2206            mountefi=1
2207        fi
2208        mkdir -p $efidir
2209        cp $bootbin $efidir
2210        if [ $mountefi -eq 1 ]; then
2211            umount /boot/efi 2>&1 > /dev/null
2212        fi
2213
2214        if [ $boottype = "syslinux" ]; then
2215            FindLdlinuxe64Binary
2216            if [ -e "$LDLINUXE64" ]; then
2217                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2218                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2219            fi
2220        fi
2221        # In all cases prepare syslinux content for BIOS mode
2222        # so that we can have multi boot mode media BIOS+UEFI
2223        if [ -e "$LDLINUXC32" ]; then
2224            LogFile "INFO: Copying $LDLINUXC32 to $bigdir/EFI"
2225            cp $LDLINUXC32 "$bigdir/EFI" 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bigtdir/EFI. Did you run out of disk space?"
2226        fi
2227    else
2228        # Useful for syslinux 5.x
2229        if [ -e "$LDLINUXC32" ]; then
2230            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2231            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir. Did you run out of disk space?"
2232        fi
2233    fi
2234
2235    # Here we need to know the ramdisk_size
2236    size_of_all_tools=`du -sk $bigdir | cut -f1`
2237    export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
2238    LogFile "INFO: Ramdisk will be $ramdisk_size KB"
2239
2240    MakeBootConfFile $boottype > $bootconf
2241    if [ "$BOOT_TYPE" = "UEFI" ]; then
2242        # Also generate the syslinux conf
2243        MakeBootConfFile syslinux > "$bigdir/EFI/syslinux.cfg"
2244    fi
2245
2246    echo -en "INFO: Tarring and zipping the data content..."
2247    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2248    LogFile "Size of the data content"
2249    LogFile "------------------------"
2250    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2251    LogFile "------------------------"
2252    echo -e "$DONE"
2253
2254    rm -rf $bigdir
2255    rm -f $needlist
2256}
2257
2258
2259Prompt() {
2260    echo -en "$1"
2261    read line
2262}
2263
2264
2265ReadLine() {
2266    local i incoming
2267    read incoming
2268    i=0
2269    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2270        i=$(($i+1))
2271        read incoming
2272    done
2273    echo "$incoming"
2274}
2275
2276
2277SizeOfPartition() {
2278    local devpath drive res stub
2279    device=$1
2280    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2281        Die "Cannot find $device's size - is your /etc/fstab sane?"
2282    fi
2283    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2284        res=`SizeOfRaidPartition $device`
2285        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2286        echo "$res"
2287        return 0
2288    fi
2289    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2290    res=`$FDISK -s $device 2>> $LOGFILE`
2291    # end patch
2292    # take only the first in case of multiple mount (cifs, nfs, ...)
2293    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2294    [ "$res" = "" ] && res="-1"
2295    echo $res
2296    return 0
2297}
2298
2299
2300SizeOfRaidPartition() {
2301    local real_dev smallest_size silly tmp
2302
2303    silly=999999999
2304    smallest_size=$silly
2305
2306    for real_dev in `GetRaidDevMembers $1` ; do
2307        tmp=`SizeOfPartition $real_dev`
2308        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2309    done
2310
2311    if [ "$smallest_size" = "$silly" ] ; then
2312        echo "-1"
2313        return 1
2314    else
2315        echo "$smallest_size"
2316        return 0
2317    fi
2318}
2319
2320
2321StripExecutable()
2322{
2323    local tmpfile
2324
2325    tmpfile=$MINDI_TMP/stripped.$$.dat
2326    [ -d "$1" ] || [ -h "$1" ] && return
2327    cp -f $1 $tmpfile 2>> $LOGFILE
2328    strip $tmpfile 2> /dev/null
2329    if [ $? -eq 0 ] ; then
2330        cp -f $tmpfile $1 2>> $LOGFILE
2331        LogFile "INFO: Stripped binary $2"
2332    fi
2333    rm -f $tmpfile
2334}
2335
2336KernelVer() {
2337        local fkern_ver fname
2338
2339        fname=$1
2340        file $fname | grep -q gzip
2341        if [ $? -eq 0 ] ; then
2342            # Used by ia64
2343            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2344        else
2345            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2346        fi
2347        echo "$fkern_ver"
2348}
2349
2350
2351# WARNING: This function should just echo the final result !!!
2352#
2353TryToFindKernelPath() {
2354    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2355
2356    we_want_version=$KERVERRUN
2357    possible_kernels=""
2358    duff_kernels=""
2359    output=""
2360
2361    if [ "$ARCH" = "ia64" ] ; then
2362       root="/boot/efi/efi"
2363    else
2364       root="/"
2365    fi
2366    # See if we're booted from a Xen kernel
2367    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2368    if [ -f /proc/xen/capabilities ]; then
2369        # It's a Xen kernel
2370        KERNEL_IS_XEN="yes"
2371        LogFile "INFO: It's a Xen kernel..."
2372    fi
2373
2374    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2375        [ ! -e "$fname" ] && continue
2376        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2377        fkern_ver=`KernelVer $fname`
2378        [ "$fkern_ver" = "" ] && continue
2379        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2380        [ -f "$fname" ] || continue
2381        [ -h "$fname" ] && continue
2382        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2383        file $fname | grep -q gzip
2384        if [ $? -eq 0 ] ; then
2385            # Used by ia64
2386            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2387                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2388                duff_kernels="$fname $duff_kernels"
2389            else
2390                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2391                possible_kernels="$fname $possible_kernels"
2392            fi
2393        else
2394            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2395                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2396                duff_kernels="$fname $duff_kernels"
2397            else
2398                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2399                possible_kernels="$fname $possible_kernels"
2400            fi
2401        fi
2402    done
2403    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2404        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2405    fi
2406    if [ ! "$possible_kernels" ] ; then
2407        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2408        possible_kernels="$duff_kernels"
2409        if [ ! "$possible_kernels" ] ; then
2410            LogAll "INFO: Sorry, no duff kernels either"
2411        else
2412            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2413            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2414        fi
2415    fi
2416    if [ $KERNEL_IS_XEN = "yes" ]; then
2417        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2418        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2419    fi
2420    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2421    noof_kernels=`CountItemsIn "$possible_kernels"`
2422    if [ "$noof_kernels" -eq "0" ] ; then
2423        LogAll "Could not find your kernel."
2424        if [ -e "/boot/vmlinuz" ] ; then
2425            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2426            output=/boot/vmlinuz
2427        else
2428            output=""
2429        fi
2430    elif [ "$noof_kernels" -eq "1" ] ; then
2431        kp=`echo "$possible_kernels" | sed s/' '//`
2432        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2433        output="$kp"
2434    else
2435        for i in $possible_kernels ; do
2436            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2437                LogAll "INFO: OK, I used my initiative and found that "
2438                LogAll "INFO: $i is probably your kernel. "
2439                output="$i"
2440                break
2441            fi
2442        done
2443        if [ ! -n "$output" ]; then
2444            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2445                output=/boot/vmlinuz
2446                LogFile "INFO: Schlomo, this one's for you."
2447            else
2448                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2449                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2450                LogFile "INFO: $possible_kernels"
2451                output=""
2452            fi
2453        fi
2454    fi
2455    if [ $KERNEL_IS_XEN = "yes" ]; then
2456        if [ "$noof_xenkernels" -eq "0" ]; then
2457            xenkernelpath=""
2458        elif [ "$noof_xenkernels" -eq "1" ]; then
2459            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2460            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2461        else
2462            for i in $possible_xenkernels ; do
2463                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2464                    LogFile "INFO: OK, I used my initiative and found that "
2465                    LogFile "INFO: $i is probably your Xen kernel. "
2466                    xenkernelpath="$i"
2467                    break
2468                fi
2469            done
2470            if [ ! -n "$xenkernelpath" ]; then
2471                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2472                if [ ! -n "$new_possible_xenkernels" ]; then
2473                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2474                    LogFile "INFO: Using $xenkernelpath"
2475                else
2476                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2477                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2478                    LogFile "INFO: $possible_xenkernels"
2479                    output=""
2480                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2481                    LogFile "INFO: Using $xenkernelpath"
2482                fi
2483            fi
2484        fi
2485        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2486            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2487        fi
2488    fi
2489    #LogAll "TryToFindKernelPath found $output"
2490    echo "$output"
2491}
2492
2493
2494MakeBootInitFile() {
2495    local tgz_dir_fname rdz_fname tempfile nodes kernelsize res currsize not_copied j k s w needed_modules_path d thelink templog
2496
2497    tgz_dir_fname=$1
2498    rdz_fname=$2
2499    kernelsize=$3
2500    tempfile=$MINDI_TMP/temp.rd
2501    res=0 
2502    templog=$MINDI_TMP/$$.log
2503    > $templog
2504
2505    LogAll "INFO: Making Boot RAM Disk ($ramdisk_size KB)"
2506    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (MakeBootInitFile)"
2507    LogAll "INFO: Creating ext2 filesystem on $tempfile"
2508    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2509    mkdir -p $mountpoint
2510    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2511
2512    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2513    for d in bin sbin lib lib64; do
2514        if [ -h "/$d" ]; then
2515            thelink=`readlink /$d`
2516            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2517            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2518            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2519                rmdir $mountpoint/$d
2520            fi
2521            if [ ! -h $mountpoint/$d ]; then
2522                rm -f $mountpoint/$d 2> /dev/null
2523                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2524            fi
2525        fi
2526    done
2527
2528    LogFile "INFO: what is now in $mountpoint"
2529    ls -al $mountpoint >> $LOGFILE
2530   
2531    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2532    # copy from rootfs into mountpoint
2533    LogAll "INFO: Copying Mindi files onto $mountpoint"
2534    for f in $tgz_dir_fname/*; do 
2535        if [ ! -r $f ]; then
2536            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2537        else
2538            cp -af $f $mountpoint 2>&1 >> $LOGFILE
2539        fi
2540    done
2541    (cd $mountpoint/etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2542    (cd $mountpoint ; ln -sf usr/sbin/init linuxrc)
2543
2544    (cd $mountpoint/dev ; tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz" ; rm -f dev-entries.tgz)
2545
2546    for w in insmod.static insmod.static.old ; do
2547        s=`which $w 2> /dev/null`
2548        if [ -e "$s" ] ; then
2549            tar cf - -C / $s 2> /dev/null | (cd $mountpoint ; tar xf -)
2550        fi
2551    done
2552
2553    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2554   
2555    # Copy of files mandatory for ssh to automate mount if sshfs is used
2556    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2557    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2558    cat > $mountpoint/tmp/myssh << EOF
2559ssh -o StrictHostKeyChecking=no $*
2560EOF
2561    chmod 755 $mountpoint/tmp/myssh
2562
2563    # Copy of files mandatory for ld.so
2564    cp -a /etc/ld.so.c* $mountpoint/etc
2565
2566    # Handle the case where busybox and mount are dynamically linked
2567    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2568    if [ $? -eq 0 ]; then
2569        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2570        rm -f bin/mount
2571    fi
2572
2573    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf (which includes all busybox deps)
2574    echo -en "INFO: Gathering dependencies of required files..."
2575    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2576    lines=`cat $DEPLIST_DIR/minimal.conf | grep -vE " *#.*|^#" | sort -u`
2577    noof_lines=`echo $lines | wc -w`
2578    progress=0
2579    for f in $lines; do
2580        if [ -d $f ]; then
2581            for g in `find $f`; do 
2582                echo $g >> $MINDI_TMP/minimal.lis
2583                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2584            done
2585        else 
2586            if [ -r $f ]; then
2587                echo $f >> $MINDI_TMP/minimal.lis
2588                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2589            fi
2590        fi
2591        progress=$(($progress+1))
2592        LogProgress $progress $noof_lines
2593    done
2594    echo -e "$DONE"
2595    echo -en "INFO: Processing all dependencies links..."
2596    lines=`sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`
2597    noof_lines=`echo $lines | tr ' ' '\n' | wc -l`
2598    progress=0
2599    for f in $lines; do
2600        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2601        progress=$(($progress+1))
2602        LogProgress $progress $noof_lines
2603    done
2604    echo -e "$DONE"
2605    # Initial / are trucated by tar
2606    finallist=""
2607    # Remove directories from the list, as tar/cp will create them anyway
2608    # and it may hurt if /lib is in it as on Debian/Ubuntu
2609    # recent bash says that -d is true for a link to a dir !
2610    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2611        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2612            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2613            if [ ! -e "$mountpoint/$f" ]; then
2614                finallist="$finallist $f"
2615            fi
2616        fi
2617    done
2618    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2619
2620    fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2621    LogFile "INFO: Copy the minimal env with cp -a --parents $fnllist -t $mountpoint"
2622    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog
2623
2624    # In case target /bin dir still doesn't exist, create it before using it
2625    if [ ! -d $mountpoint/bin ]; then
2626        mkdir -p $mountpoint/bin
2627    fi
2628
2629    # For older distributions expecting /sbin/init provides it
2630    if [ ! -e "$mountpoint/sbin/init" ]; then
2631        (cd $mountpoint/sbin ; ln -sf ../usr/sbin/init .)
2632    fi
2633
2634    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2635    (cd $mountpoint ; ln -sf /bin/bash bin/sh)
2636    LogFile "INFO: Using bash as default shell"
2637
2638    # Avoids an issue on some distro (RHEL5)
2639    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2640
2641    # Management of udev (which includes modprobe in rules)
2642    ps auxww | grep -v grep | grep -qw udevd
2643    if [ $? -eq 0 ]; then
2644        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2645        LogFile "INFO: udev device manager found"
2646        tar cf - -C / /etc/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /etc/udev analysis" $templog
2647        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2648        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2649        # Do not do it if it's a link (Ubuntu 64 bits #503)
2650        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2651            tar cf - -C / /lib64/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /lib64/udev analysis" $templog
2652        fi
2653        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2654            tar cf - -C / /lib32/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /lib32/udev analysis" $templog
2655        fi
2656        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2657            tar cf - -C / /lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /lib/udev analysis" $templog
2658        fi
2659        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2660            tar cf - -C / /usr/lib/udev 2> $templog | (cd $mountpoint ; tar xf -)  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog
2661        fi
2662        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2663            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2664            lis=""
2665            # Get only the files which exist in that list
2666            # and potentially their symlink structure
2667            for i in $lis2; do
2668                if [ -h $i ]; then
2669                    j=$i
2670                    while [ -h $j ]; do
2671                        lis="$lis $j"
2672                        j=`readlink -f $j`
2673                    done
2674                    lis="$lis $j"
2675                elif [ -d $i ]; then
2676                    lis3="$lis3 $i"
2677                elif [ -f $i ]; then
2678                    lis="$lis $i"
2679                fi
2680            done
2681            # And their deps
2682            LocateDeps $lis > $MINDI_TMP/udev.lis
2683            for i in $lis; do
2684                if [ "`echo $i | cut -c1`" = "/" ]; then
2685                    j=`echo $i | cut -c2-`
2686                    [ "$j" != "" ] && rm -f $j
2687                fi
2688                echo "$i" >> $MINDI_TMP/udev.lis
2689            done
2690            finallist=""
2691            # Remove directories from the list, as tar/cp will create them anyway
2692            # and it may hurt if /lib is in it as on Debian/Ubuntu
2693            # recent bash says that -d is true for a link to a dir !
2694            for f in `sort -u $MINDI_TMP/udev.lis`; do
2695                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2696                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2697                    if [ ! -e "$mountpoint/$f" ]; then
2698                        finallist="$finallist $f"
2699                    fi
2700                fi
2701            done
2702            # But adds the directory useful for udev in $lis3
2703            fnllist=`echo $finallist | tr ' ' '\n' | sort -u | tr '\n' ' '`
2704            LogFile "INFO: Copying udev related files with cp -a --parents $fnllist -t $mountpoint/"
2705            cp -a --parents $fnllist $lis3 -t $mountpoint/ 2> $templog  || LogIt "ERROR: Problem in udev.lis analysis" $templog
2706            rm -f $MINDI_TMP/udev.lis
2707        else
2708            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2709            LogAll "         mindi will use static devices which may cause problems"
2710            rm -f $mountpoint/tmp/USE-UDEV
2711        fi
2712    fi
2713
2714    # Management of potential HW info (ProLiant only at the moment)
2715    rm -rf $MINDI_CACHE/bkphw
2716    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2717    if [ -d $MINDI_CACHE/bkphw ]; then
2718        LogIt "INFO: Hardware Information found and saved ..."
2719        cp -rp $MINDI_CACHE/bkphw $mountpoint
2720        if [ -f $MINDI_CACHE/tools.files ]; then
2721            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2722            LocateDeps $lis > $MINDI_TMP/tools.lis
2723            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in tools.lis analysis" $templog
2724        fi
2725        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2726            mv -f $MINDI_CACHE/mindi-rsthw $mountpoint
2727            chmod 755 $mountpoint/mindi-rsthw
2728        fi
2729        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2730    fi
2731
2732    # Management of perl scripts delivered needed at restore time
2733    LogAll "INFO: Analyzing perl modules dependencies..."
2734    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog
2735    LogFile "DBG4: Perl Modules found:"
2736    LogFile "-------------------------"
2737    cat $MINDI_TMP/perl.lis >> $LOGFILE
2738    LogFile "-------------------------"
2739    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in perl scripts analysis" $templog
2740
2741    for w in cdrom groovy-stuff ; do
2742        mkdir -p mnt/$w
2743    done
2744
2745    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in fd dev analysis" $templog
2746
2747    needed_modules=""
2748    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2749
2750    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2751        # For PXE boot
2752        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2753    fi
2754    for i in $DENY_MODS; do
2755        LogFile "INFO: Removing $i from the list of modules to load"
2756        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2757    done
2758
2759    if [ "${kernelname}" != "" ]; then
2760        needed_modules_path=lib/modules/${kernelname}
2761        mkgmopt="-k ${kernelname}"
2762    else
2763        needed_modules_path=lib/modules/$KERVERRUN
2764        mkgmopt="-k $KERVERRUN"
2765    fi
2766
2767    [ -e "/$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2768    LogAll "INFO: Analyzing kernel modules dependencies..."
2769    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2770
2771    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2772    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog
2773
2774    # Uncompress modules if not using udev and native modprobe
2775    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2776        for i in $needed_modules; do
2777            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2778                gunzip -f $mountpoint/$i
2779            fi
2780            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2781                bunzip2 -f $mountpoint/$i
2782            fi
2783            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2784                unxz -f $mountpoint/$i
2785            fi
2786            LogFile "INFO: Uncompressing $i"
2787        done
2788    fi
2789
2790    # Also copy modules.* in case of udev so that normal modprobe works
2791    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog
2792
2793    # Copy FW in case some drivers needs it
2794    for d in "/lib" "/usr/lib"; do
2795        if [ -d "$d/firmware" -a ! -h $d ]; then
2796            cp -a "$d/firmware" "$mountpoint/$d"
2797        fi
2798    done
2799
2800    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2801    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2802        if [ -d "$d/multipath" -a ! -h $d ]; then
2803            cp -a "$d/multipath" "$mountpoint/$d"
2804        fi
2805    done
2806
2807    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2808    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2809
2810    # Copy an additional ProLiant tool for OBDR support
2811    if [ -f $MINDI_TMP/OBDR ]; then
2812        found=0
2813        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2814            mkdir -p $mountpoint/usr/bin
2815            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2816            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2817            found=1
2818        fi
2819        if [ -x /usr/bin/sg_wr_mode ]; then
2820            mkdir -p $mountpoint/usr/bin
2821            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2822            LocateDeps $lis > $MINDI_TMP/obdr.lis
2823            tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | (cd $mountpoint ; tar xf -) || LogIt "ERROR: Problem in obdr.lis analysis" $templog
2824            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2825            found=1
2826        fi
2827        if [ $found -eq 0 ]; then
2828            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2829            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2830        fi
2831    fi
2832
2833    if [ ! -e "/sbin/devfsd" ]; then
2834        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2835        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2836        rm -f $mountpoint/sbin/devfsd
2837    fi
2838    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2839    if [ _"$MONDO_SHARE" != _"" ]; then
2840        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2841        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2842        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2843        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2844        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2845    fi
2846
2847    # Create module list to load at restore time
2848    rm -f $mountpoint/tmp/modules
2849    for m in $CDROM_MODS; do
2850        echo $m >> $mountpoint/tmp/modules
2851    done
2852
2853    mkdir -p $mountpoint/proc
2854    LogFile "---------------------------"
2855    LogFile "Size of initial ramdisk:"
2856    LogFile "---------------------------"
2857    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2858    LogFile "---------------------------"
2859    LogFile "Content of initial ramdisk:"
2860    LogFile "---------------------------"
2861    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2862    LogFile "---------------------------"
2863
2864    # Determine what filesystem to use for initrd image
2865    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2866    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2867    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2868    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2869        # say what will be used
2870        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2871        # kernel expects linuxrc in ext2 filesystem
2872        (cd "$mountpoint" && ln -sf usr/sbin/init linuxrc)
2873        # unmount loop filesystem and create image file using the standard approach
2874        umount $mountpoint || Die "Cannot unmount $tempfile"
2875        dd if=$tempfile bs=1k of=${rdz_fname}.tmp > /dev/null 2> /dev/null
2876        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2877            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2878        else
2879            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2880        fi
2881        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2882        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2883        rm -f ${rdz_fname}.tmp
2884        # log that we are done
2885    elif [ "$gvFileSystem" = "initramfs" ]; then
2886        # say what will be used
2887        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2888        # make sure that cpio is there
2889        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2890        # kernel expects init in cpio filesystem
2891        (cd "$mountpoint" ; ln -sf usr/sbin/init init)
2892        # create cpio image file and unmount loop filesystem
2893        (cd "$mountpoint" ; find . -print | cpio -o -H newc 2> /dev/null | gzip -9 > $rdz_fname)
2894        umount $mountpoint || Die "Cannot unmount $tempfile"
2895        # log that we are done
2896    else
2897        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2898    fi
2899
2900    if [ "$res" -eq "0" ] ; then
2901        LogAll "INFO: MakeBootInitFile finished without error."
2902    else
2903        LogAll "WARNING: MakeBootInitFile exits WITH ERRORS."
2904    fi
2905    return 0
2906}
2907
2908
2909##############################################################################
2910#----------------------------------- Main -----------------------------------#
2911##############################################################################
2912
2913# Now we can create what we need
2914mkdir -p $MINDI_TMP
2915
2916# --nolog needs to be first, and is used in analyze-my-lvm
2917if [ "$1" = "--nolog" ] ; then
2918    shift
2919    LOGFILE=/dev/stderr
2920else
2921    > $LOGFILE
2922fi
2923if [ "$1" = "--printvar" ] ; then
2924    shift
2925    if [ _"$1" != _"" ] ; then
2926        set | grep -Ew "^$1" | cut -d= -f2
2927    fi
2928    exit 0
2929fi
2930
2931LogFile "mindi v$MINDI_VERSION"
2932LogFile "-----------------------------"
2933LogFile "Start date : `date`"
2934LogFile "-----------------------------"
2935LogFile "$ARCH architecture detected"
2936LogFile "mindi called with the following arguments:"
2937echo "$@">> $LOGFILE
2938LogFile "-----------------------------"
2939LogFile "pbdistrocheck results:"
2940pbdistrocheck >> $LOGFILE
2941LogFile "-----------------------------"
2942
2943# Log some capital variables
2944[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2945[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2946LogFile "MONDO_SHARE = $MONDO_SHARE"
2947LogFile "MINDI_LIB = $MINDI_LIB"
2948LogFile "MINDI_SBIN = $MINDI_SBIN"
2949LogFile "MINDI_CONF = $MINDI_CONF"
2950# Purge from potential old run
2951if [ _"$MINDI_CACHE" = _"" ]; then
2952    Die "MINDI_CACHE undefined"
2953else
2954    LogFile "MINDI_CACHE = $MINDI_CACHE"
2955fi
2956
2957if [ -f $MINDI_CONFIG ]; then
2958    LogFile "-----------------------------"
2959    LogFile " Mindi configuration file    "
2960    LogFile "-----------------------------"
2961    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2962    LogFile "-----------------------------"
2963fi
2964LogFile "In Mindi"
2965LogFile "--------"
2966LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2967LogFile "--------"
2968
2969trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2970
2971# Sanity checks
2972which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2973which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2974which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2975which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2976if which awk &> /dev/null ; then
2977    if ! which gawk &> /dev/null ; then
2978        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2979    fi
2980fi
2981which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2982[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2983
2984[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2985
2986# Update the PATH variable if incomplete
2987if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2988    PATH=$PATH:/sbin:/usr/sbin
2989    export PATH
2990    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2991    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2992    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2993fi
2994
2995if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2996    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2997fi
2998
2999### TODO
3000### Fix as it's not mandatory on ia64
3001if [ "$ARCH" = "ia64" ] ; then
3002    if which elilo &> /dev/null ; then
3003        LILO_EXE=elilo
3004    else
3005        LILO_EXE=`which false 2> /dev/null`
3006    fi
3007else
3008    FindIsolinuxBinary
3009fi
3010trap "Aborted" SIGTERM
3011DONE="\r\t\t\t\t\t\t\t\tDone.         "
3012kernelpath=""
3013MONDO_ROOT=/var/cache/mondo
3014mkdir -p $MONDO_ROOT
3015
3016if [ -d "/proc/lvm" ]; then
3017    # LVM v1
3018    LVMCMD=""
3019    LVM="v1"
3020elif [ -d "/dev/mapper" ]; then
3021    # LVM v2
3022    LVMCMD="lvm"
3023    LVM="v2"
3024else
3025    LVM="false"
3026fi
3027
3028if [ -e "/proc/cmdline" ]; then
3029    CMDLINE="/proc/cmdline"
3030elif [ -e "/tmp/cmdline" ]; then
3031    CMDLINE="/tmp/cmdline"
3032else
3033    CMDLINE="/dev/null"
3034fi
3035
3036LogFile "INFO: LVM set to $LVM"
3037LogFile "----------"
3038LogFile "mount result:"
3039LogFile "-------------"
3040mount >> $LOGFILE
3041if [ -e "/etc/raidtab" ]; then
3042    LogFile "-------------"
3043    LogFile "/etc/raidtab content:"
3044    LogFile "-------------"
3045    cat /etc/raidtab >> $LOGFILE
3046else
3047    LogFile "No file /etc/raidtab"
3048fi
3049if [ -e "/etc/mdadm.conf" ]; then
3050    LogFile "-------------"
3051    LogFile "/etc/mdadm.conf content:"
3052    LogFile "-------------"
3053    cat /etc/mdadm.conf >> $LOGFILE
3054else
3055    LogFile "-------------"
3056    LogFile "No file /etc/mdadm.conf"
3057fi
3058LogFile "-------------"
3059LogFile "cat $CMDLINE"
3060LogFile "-------------"
3061cat $CMDLINE >> $LOGFILE
3062LogFile "-------------"
3063LogFile "cat /proc/swaps:"
3064LogFile "-------------"
3065cat /proc/swaps >> $LOGFILE
3066LogFile "-------------"
3067if [ -e "/proc/mdstat" ]; then
3068    LogFile "cat /proc/mdstat:"
3069    LogFile "-------------"
3070    cat /proc/mdstat >> $LOGFILE
3071else
3072    LogFile "No pseudo file /proc/mdstat"
3073fi
3074LogFile "-------------"
3075LogFile "cat /proc/partitions:"
3076LogFile "-------------"
3077cat /proc/partitions >> $LOGFILE
3078LogFile "-------------"
3079LogFile "cat /proc/filesystems:"
3080LogFile "-------------"
3081cat /proc/filesystems >> $LOGFILE
3082LogFile "-------------"
3083LogFile "lsmod result:"
3084LogFile "-------------"
3085lsmod >> $LOGFILE
3086MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3087if [ -x /usr/sbin/esxcfg-module ]; then
3088    LogFile "-------------"
3089    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3090    LogFile "-------------"
3091    LogFile "VMWare modules"
3092    LogFile "-------------"
3093    /usr/sbin/esxcfg-module -l >> $LOGFILE
3094    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3095fi
3096LogFile "-------------" 
3097LogFile "FORCE_MODS:"
3098LogFile "-------------"
3099LogFile "$FORCE_MODS"
3100LogFile "-------------"
3101LogFile "DENY_MODS:"
3102LogFile "-------------"
3103LogFile "$DENY_MODS"
3104LogFile "-------------"
3105LogFile "df result:"
3106LogFile "----------"
3107df -aT >> $LOGFILE
3108LogFile "-------------"
3109LogFile "df -i result:"
3110LogFile "----------"
3111df -i >> $LOGFILE
3112LogFile "-------------"
3113if [ -r /boot/grub/menu.lst ]; then
3114    LogFile "-------------"
3115    LogFile "INFO: /boot/grub/menu.lst content"
3116    LogFile "-------------"
3117    cat /boot/grub/menu.lst >> $LOGFILE
3118    LogFile "-------------"
3119fi
3120if [ -r /boot/grub/grub.conf ]; then
3121    LogFile "-------------"
3122    LogFile "INFO: /boot/grub/grub.conf content"
3123    LogFile "-------------"
3124    cat /boot/grub/grub.conf >> $LOGFILE
3125    LogFile "-------------"
3126fi
3127if [ -r /boot/grub/grub.cfg ]; then
3128    LogFile "-------------"
3129    LogFile "INFO: /boot/grub/grub.cfg content"
3130    LogFile "-------------"
3131    cat /boot/grub/grub.cfg >> $LOGFILE
3132    LogFile "-------------"
3133fi
3134if [ -r /boot/grub/device.map ]; then
3135    LogFile "-------------"
3136    LogFile "INFO: /boot/grub/device.map content"
3137    LogFile "-------------"
3138    cat /boot/grub/device.map >> $LOGFILE
3139    LogFile "-------------"
3140fi
3141if [ -r /etc/lilo.conf ]; then
3142    LogFile "-------------"
3143    LogFile "INFO: /etc/lilo.conf content"
3144    LogFile "-------------"
3145    cat /etc/lilo.conf >> $LOGFILE
3146fi
3147if [ -d /boot/efi ]; then
3148    gcf=`find /boot/efi -name 'grub.c*'`
3149    if [ _"$gcf" = _"" ]; then
3150        LogFile "Found a /boot/efi directory without a grub config file in it"
3151    else
3152        LogFile "-------------"
3153        LogFile "INFO: $gcf content"
3154        LogFile "-------------"
3155        cat $gcf >> $LOGFILE
3156        LogFile "-------------"
3157    fi
3158fi
3159
3160LogFile "Full fdisk info"
3161LogFile "---------------"
3162$FDISK -l >> $LOGFILE
3163LogFile "----------------"
3164
3165# Compute libata version
3166laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3167# If libata v2 is used then remove ide-generic as it will perturbate boot
3168if [ "`echo $MODULES | grep libata`" ]; then
3169    if [ "$laver" = "2" ]; then
3170        DENY_MODS="$DENY_MODS ide-generic"
3171        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3172        LogFile "-------------"
3173    fi
3174fi
3175
3176# Check for McAfee which disturbs the access to some files (tgz in articular)
3177if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3178    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3179    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3180    LogFile "WARNING: You have two options:"
3181    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3182    LogFile "WARNING:  - Disable the scanner during the backup"
3183fi
3184
3185#
3186# If we have a USB device we need to store info
3187# and remove it from the parameters line
3188#
3189if [ "$#" -ne "0" ] ; then
3190    if [ "$1" = "--usb" ] ; then
3191        shift
3192        USBDEVICE=$1
3193        if [ _"$USBDEVICE" = _"" ]; then
3194            Die "No USB device specified"
3195        fi
3196        shift
3197    fi
3198fi
3199
3200if [ "$#" -ne "0" ] ; then
3201    if [ "$1" = "--findkernel" ] ; then
3202        resk=`TryToFindKernelPath`
3203        # Avoids logfile content for mondo
3204        export MONDO_SHARE=""
3205        if [ "$resk" = "" ] ; then
3206            if [ $KERNEL_IS_XEN = "yes" ]; then
3207                echo "$xenkernelpath"
3208                LogFile "INFO: xenkernelpath = $xenkernelpath"
3209                MindiExit 0
3210            else
3211                MindiExit -1
3212            fi
3213        else
3214            echo "$resk"
3215            LogFile "INFO: kernelpath = $resk"
3216            MindiExit 0
3217        fi
3218    elif [ "$1" = "--locatedeps" ] ; then
3219        [ ! "$2" ] && Die "Please specify the binary to look at"
3220        LocateDeps $*
3221        # Avoids logfile content for mondo
3222        export MONDO_SHARE=""
3223        MindiExit $?
3224    elif [ "$1" = "--readalllink" ] ; then
3225        [ ! "$2" ] && Die "Please specify the binary to look at"
3226        # Avoids logfile content for mondo
3227        export MONDO_SHARE=""
3228        mr-read-all-link $2
3229        MindiExit $?
3230    elif [ "$1" = "--makebcf" ] ; then
3231        [ ! "$2" ] && Die "Please specify the boot loader to check (syslinux, grub, grub2)"
3232        MakeBootConfFile $2
3233        MindiExit 0
3234    elif [ "$1" = "--makemessage" ] ; then
3235        MakeMessageFile | cut -c1-80
3236        MindiExit 0
3237    elif [ "$1" = "--makemountlist" ] ; then
3238        [ ! "$2" ] && Die "Please specify the output file"
3239        MakeMountlist $2
3240        CheckMountlist $2
3241        # Avoids logfile content for mondo
3242        export MONDO_SHARE=""
3243        MindiExit $?
3244    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3245        echo "Mindi v$MINDI_VERSION"
3246        # Avoids logfile content for mondo
3247        export MONDO_SHARE=""
3248        MindiExit 0
3249    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3250        MONDO_TMP=$2
3251        # Change MINDI_TMP for the one provided by mondo
3252        # So that it can get back the built files
3253        if [ _"$MONDO_TMP" = _"" ]; then
3254            Die "MONDO_TMP is empty, aborting"
3255        fi
3256        if [ _"$MONDO_TMP" = _"/" ]; then
3257            Die "MONDO_TMP is /, aborting"
3258        fi
3259        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3260        rmdir $MINDI_TMP
3261        export MINDI_TMP=$MONDO_TMP
3262        mkdir -p $MINDI_TMP
3263
3264        # This is the scratch dir in mondo - subdir images
3265        MINDI_CACHE=$3
3266        LogFile "MINDI_CACHE = $MINDI_CACHE"
3267
3268        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3269        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3270       
3271###
3272### Sq-Modification...
3273### Attempt to locate kernel specific module path
3274### if module path is found then use it other wise use uname -r to set it...
3275###
3276        if [ $KERNEL_IS_XEN = "yes" ]; then
3277            LogAll "INFO: xenkernelpath = $xenkernelpath"
3278        fi
3279        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3280        if [ ! -d "/lib/modules/$kernelname" ]; then
3281           LogAll "WARNING: Module path for ${kernelpath} not found..."
3282           LogAll "         using running kernel\'s modules."
3283           kernelname=$KERVERRUN
3284        else
3285           LogAll "INFO: Using modules for kernel: ${kernelname}"
3286        fi
3287        LogAll "INFO: kernelname = $kernelname"
3288        LogAll "INFO: kernelpath = $kernelpath"
3289###
3290### end of Sq-Modification
3291###
3292        TAPEDEV=$5
3293        TAPESIZE=$6
3294        FILES_IN_FILELIST=$7
3295        USE_LZO=$8
3296        CDRECOVERY=$9
3297        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3298            IMAGE_DEVS=""
3299        else
3300            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3301        fi
3302        if [ "${11}" ] ; then
3303            LILO_OPTIONS=""
3304    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3305        fi
3306        LAST_FILELIST_NUMBER=${12}
3307        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3308        export MINDI_EXCLUDE_DEVS="${14}"
3309        USE_COMP="${15}"
3310        USE_LILO="${16}"
3311        USE_STAR="${17}"
3312        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3313        DIFFERENTIAL="${19}"
3314        USE_GZIP="${20}"
3315        USE_LZMA="${21}"
3316        NOT_BOOT="${22}"
3317        BOOT_TYPE="${23}"
3318        [ "$USE_COMP" = "" ] && USE_COMP=yes
3319        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3320        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3321        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3322        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3323        # MONDO_ROOT is the real scratchdir
3324        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3325        if [ _"$MONDO_ROOT" != _"" ]; then
3326            mkdir -p $MONDO_ROOT
3327        else
3328            Die "MONDO_ROOT is undefined"
3329        fi
3330    else
3331        LogScreen "Syntax: mindi (--custom ....)"
3332        MindiExit -1
3333    fi
3334fi
3335
3336if [ _"$MINDI_CACHE" != _"" ]; then
3337    rm -rf $MINDI_CACHE/* 2> /dev/null
3338    mkdir -p $MINDI_CACHE
3339fi
3340
3341[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3342
3343if [ _"$MONDO_SHARE" = _"" ]; then
3344    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3345    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3346    LogIt "BusyBox sources are available from http://www.busybox.net"
3347    LogIt "------------------------------------------------------------------------------"
3348else
3349    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3350fi
3351if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3352    LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3353else
3354    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3355    MindiExit -1
3356fi
3357
3358for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3359    modinfo $i 2> /dev/null 1> /dev/null
3360    if [ $? -eq 0 ]; then
3361        modprobe $i 2>&1 > /dev/null
3362    fi
3363done
3364
3365LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3366LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3367LogFile "NOT_BOOT = '$NOT_BOOT'"
3368if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3369    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3370    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3371    MakeMountlist $MINDI_TMP/mountlist.txt
3372    CheckMountlist $MINDI_TMP/mountlist.txt
3373    mkdir -p $MINDI_TMP/small-all/tmp
3374    cd "$MINDI_TMP/small-all"
3375    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3376    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3377    sleep 2
3378    LogIt "Done. Exiting."
3379    MindiExit 0
3380fi
3381
3382if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3383    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3384fi
3385
3386if [ "$kernelpath" = "" ] ; then
3387    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3388    echo -en "\nDo you want to use your own kernel to build the boot disk ([y]/n) ?"
3389    read ch
3390    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3391        USE_OWN_KERNEL="yes"
3392    else
3393        USE_OWN_KERNEL="no"
3394    fi
3395    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3396        kernelpath=`TryToFindKernelPath`
3397        if [ "$kernelpath" = "" ] ; then
3398            echo -n "Please enter kernel path : "
3399            read kernelpath
3400        fi
3401    fi
3402fi
3403
3404echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3405[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3406
3407mountpoint=$MINDI_TMP/mountpoint.$$
3408PrepareDataDiskImages
3409
3410MakeBootInitFile $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not create initrd.img"
3411
3412[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3413...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3414
3415if [ _"$MONDO_SHARE" = _"" ]; then
3416    OfferToMakeBootableISO
3417    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3418        OfferToMakeBootableUSB
3419    fi
3420    LogAll "INFO: Mindi Finished"
3421elif [ "$TAPEDEV" ] ; then
3422    if [ "$ARCH" != "ia64" ] ; then
3423        # We need to keep the img file as boot file for ia64 platform
3424        rm -f $MINDI_CACHE/{*img,*iso}
3425    else
3426        rm -f $MINDI_CACHE/*iso
3427    fi
3428    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3429        OfferToMakeBootableUSB
3430    fi
3431    OfferToMakeBootableISO
3432    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3433        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3434    else
3435        Die "Cannot find all.tar.gz, to be written to tape"
3436    fi
3437elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3438    OfferToMakeBootableUSB
3439else
3440    OfferToMakeBootableISO
3441fi
3442
3443if [ -f $MINDI_TMP/$MRCFG ]; then
3444    LogFile "INFO: Your $MRCFG file is:"
3445    LogFile "--------------------------"
3446    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3447    LogFile "--------------------------"
3448else
3449    if [ _"$MONDO_SHARE" != _"" ] ; then
3450        LogIt "ERROR: You don't have a $MRCFG file !"
3451    fi
3452fi
3453# cleanup
3454MindiExit 0
Note: See TracBrowser for help on using the repository browser.