source: branches/3.2/mindi/mindi @ 3502

Last change on this file since 3502 was 3502, checked in by bruno, 3 years ago
  • Adds support for xorriso for UEFI distributions using it such as Debian 8
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 122.8 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3502 2016-02-09 13:34:54Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=120000      # increase if you run out of ramdisk space
47BOOT_SIZE=86000         # size of the boot disk in KB
48
49PROMPT_MAKE_CD_IMAGE="yes"
50    # Ask if you want to make a CD Image to be written?
51    # if this is set to 'no', then the image will be created automatically
52
53PROMPT_MAKE_USB_IMAGE="yes"
54    # Ask if you want to make a USB Image to be written?
55    # if this is set to 'no', then the image will be created automatically
56
57USE_OWN_KERNEL="yes"
58    # If set to "no", you will be prompted for whether or not
59    # you want to use your own kernel, or the supplied default.
60    # If "yes" mindi will automatically use your own kernel.
61
62KERNEL_IS_XEN="no"
63    # If set to "no", the kernel is not a Xen kernel
64    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
65xenkernelpath=""
66 
67MY_FSTAB=/etc/fstab
68TAPE_MODS="ht st osst ide-tape ide_tape"
69SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
70
71# ide-probe-mod
72IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
73PCMCIA_MODS="pcmcia_core ds yenta_socket"
74USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
75NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
76CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
77# Replace with that line for HP OCMP e.g.
78#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
79DENY_MODS="kqemu vxfen"
80# Force some modules to be included
81FORCE_MODS=""
82
83LOGFILE=/var/log/mindi.log
84BOOT_MEDIA_MESSAGE="\
85To format and restore all files automatically, type '0enuke07' <enter>.\n\
86To restore some/all files interactively, type '0einteractive07' <enter>.\n\
87To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
88To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
89\n\
90You may add one or more parameters as well as per the function keys below\n\
91e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
92\n\
93If restoring from a local external disk or USB key, do not connect it \n\
94until the boot-up has finished.\n\
95\n\
96\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
97"
98FDISK=$MINDI_SBIN/mr-parted2fdisk
99
100# Using a config file allow to overwrite some values
101MINDI_CONFIG="$MINDI_CONF/mindi.conf"
102if [ -f $MINDI_CONFIG ]; then
103    . $MINDI_CONFIG
104fi
105DEPLIST_FILE="$MINDI_CONF/deplist.txt"
106DEPLIST_DIR="$MINDI_CONF/deplist.d"
107
108# Debian 8 system e.g. use xorriso for UEFI support.
109# However, they use exactly the same command line parameters as mkisofs, so just
110# use it if it's available.
111ISO_CMD="/usr/bin/xorriso"
112
113# Mandriva system e.g. use cdrkit, which uses genisoimage.
114# However, they use exactly the same command line parameters as mkisofs, so just
115# use it if it's available.
116if [ ! -x $ISO_CMD ]; then
117    ISO_CMD=/usr/bin/genisoimage
118fi
119
120# For compatibility with previous versions default to mkisofs
121if [ ! -x $ISO_CMD ]; then
122    ISO_CMD=/usr/bin/mkisofs
123fi
124
125ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
126
127# Mindi set this as default in case it's invoked alone
128BOOT_TYPE="BIOS"
129# and we also check whether we're UEFI or not.
130if [ -d "/sys/firmware/efi" ]; then
131    BOOT_TYPE="UEFI"
132    ISO_OPT="$ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
133else
134    # Find MBR in case of bootable USB device to build
135    MBRFILE=/usr/lib/syslinux/mbr.bin
136    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
137    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
138    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
139    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
140fi
141
142# Function to log on screen only
143LogScreen() {
144        if [ -e /dev/stderr ] ; then
145        echo -e "$1" >> /dev/stderr
146    elif [ -e /usr/bin/logger ] ; then
147        /usr/bin/logger -s $1
148    fi
149}
150
151# Function to log in log file only
152LogFile() {
153
154    echo -e "$1" >> $LOGFILE
155    if [ _"$2" != _"" ]; then
156        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
157        rm -f "$2"
158    fi
159}
160
161# Function to log in both screen and logfile
162LogAll() {
163    LogScreen "$1"
164    LogFile "$1" "$2"
165}
166
167# Preserved for compatibility
168LogIt() {
169    LogAll "$1" "$2"
170}
171
172# Last function called before exiting
173# Parameter is exit code value
174# Should be declared here as used immediately below potentialy
175MindiExit() {
176    LogFile "Mindi $MINDI_VERSION is exiting" 
177    LogFile "End date : `date`" 
178    if [ _"$MONDO_SHARE" != _"" ] ; then
179        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
180        if [ -f $LOGFILE ]; then
181            cat $LOGFILE >> /var/log/mondoarchive.log
182        else
183            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
184        fi
185        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
186    fi
187
188    cd /
189    sync&
190
191    # Clean temporary files only when standalone mindi
192    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
193        rm -Rf $MINDI_TMP
194    fi
195    exit $1
196}
197
198Die() {
199    local i
200    if [ "$1" = "" ] ; then
201        LogAll "FATAL ERROR"
202    else
203        LogAll "FATAL ERROR. $1"
204    fi
205    if [ _"$2" != _"" ]; then
206        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
207    fi
208    rm -f "$2"
209
210    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
211    LogAll "See http://www.mondorescue.org for more information."
212    LogAll "WE CANNOT HELP unless you enclose that file.\n"
213    MindiExit -1
214}
215
216# Now we can create what we need
217MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
218if [ $? -ne 0 ]; then
219    df $TMPDIR
220    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
221fi
222if [ _"$MINDI_TMP" = _"" ]; then
223    Die "MINDI_TMP is empty, aborting"
224fi
225if [ _"$MINDI_TMP" = _"/" ]; then
226    Die "MINDI_TMP is /, aborting"
227fi
228export MINDI_TMP
229
230# ----------------------------------------------------------------------------
231
232
233AbortHere() {
234    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
235    Die "Program is terminating in response to signal received from OS/user"
236}
237
238
239Aborted() {
240    trap SIGHUP SIGTERM SIGTRAP SIGINT
241    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
242    Die "User abort."
243}
244
245
246AddFileToCfgIfExists() {
247    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
248}
249
250
251AddKeyboardMappingFile() {
252    local mappath r included_list included_item i res ii sss
253    mappath=$1
254    KBDEPTH=$(($KBDEPTH+1))
255    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
256    if [ -e "$bigdir/$mappath" ] ; then
257        LogFile "INFO: $mappath already added"
258        return
259    elif [ -d "$bigdir/$mappath" ] ; then
260        echo "Cannot add $mappath: it's a directory. Sorry."
261        return
262    fi
263    LogFile "INFO: Added kbd map $mappath"
264    if [ ! -e "$mappath" ] ; then
265        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
266        if [ ! -e "$mappath" ] ; then
267            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
268            return
269        fi
270    else
271        echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
272    fi
273
274    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
275    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
276        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
277    else
278        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
279    fi
280    for included_item in $included_list ; do
281        if [ ! -e "$included_item" ] ; then
282            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
283            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
284            for ii in $sss ; do
285                [ -e "$ii" ] && AddKeyboardMappingFile $ii
286            done
287        else
288            AddKeyboardMappingFile $included_item
289        fi
290    done
291}
292
293
294CopyDependenciesToDirectory() {
295    local outdir incoming counter d found tdir templog
296    outdir=$1
297    templog=$MINDI_TMP/$$.log
298    mkdir -p $outdir
299    incoming=`ReadLine`
300    counter=0
301    > $templog
302
303    while [ "$incoming" != "" ] ; do
304        # Non absolute file names should not arrive till here => skipped
305        if [ `echo "$incoming" | cut -c1` != '/' ]; then
306            LogAll "WARNING: Unable to handle $incoming"
307            incoming=`ReadLine`
308            continue
309        fi
310        # no parent directory of incoming should be a link, copy is not possible in that case
311        d=`dirname "$incoming"`
312        found="false"
313        while [ $d != "/" -a $found = "false" ]; do
314            [ -h "$d" ] && found="true"
315            d=`dirname "$d"`
316        done
317        if [ -d "$incoming" -a ! -h "$incoming" ]; then
318            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
319        elif [ -e "$incoming" ] && [ $found = "false" ]; then
320            if [ ! -h "$incoming" ]; then
321                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
322            else
323                tdir=`dirname "$incoming"`
324                if [ ! -e "$outdir/$tdir" ]; then
325                    mkdir -p "$outdir/$tdir"
326                fi
327                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
328            fi
329            # Only uncompress modules if not using udevd
330            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
331                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
332            fi
333            [ -x "$outdir" ] && StripExecutable $outdir
334            counter=$(($counter+1))
335            LogProgress $counter $2
336        fi
337        incoming=`ReadLine`
338    done
339}
340
341
342CountItemsIn() {
343    local r
344    r=0
345    for q in $1 ; do
346        r=$(($r+1))
347    done
348    echo $r
349}
350
351
352DropOptimizedLibraries() {
353    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
354    filelist=$1
355    outdir=$2
356
357    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
358    if [ "$list_of_optimized_libraries" = "" ] ; then
359        return 0
360    fi
361    echo -en "Dropping i686-optimized libraries if appropriate"
362    for optimized_lib_name in $list_of_optimized_libraries ; do
363        echo -en "."
364        reason=""
365        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
366        echo "$vanilla_lib_name" >> $filelist
367        LogFile "INFO: Adding $vanilla_lib_name to filelist"
368        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
369        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
370
371        # This may return multiple files
372        for resolved in `mr-read-all-link $vanilla_lib_name`; do
373            LogFile "INFO: Adding as deps $resolved to filelist"
374            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
375            if [ "$vanilla_resolved_name" != "$resolved" ]; then
376                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
377                rmdir $outdir$resolved > /dev/null 2> /dev/null
378                ln -sf $vanilla_resolved_name $outdir$resolved
379                LogFile "INFO: Excluding deps $resolved" 
380                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
381                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
382                echo "$vanilla_resolved_name" >> $filelist.tmp
383                mv -f $filelist.tmp $filelist
384            fi
385        done
386    done
387    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
388    mv -f $filelist.tmp $filelist
389    echo -e "$DONE"
390}
391
392
393FindAndAddUserKeyboardMappingFile() {
394    local r res mapfile mappath included_item included_list keyfile mp locale
395    LogAll "INFO: Analyzing your keyboard's configuration."
396    KEYDIR=/usr/lib/kbd
397    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
398    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
399    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
400    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
401    if [ ! -e "$KEYDIR" ] ; then
402        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
403        return 0
404    fi
405    if [ -e "/etc/sysconfig/keyboard" ] ; then
406        LogFile "INFO: Red Hat-style config detected."
407        keyfile=/etc/sysconfig/keyboard
408    elif [ -e "/etc/vconsole.conf" ] ; then
409        LogFile "INFO: New Fedora style config detected."
410        keyfile=/etc/vconsole.conf
411    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
412        LogFile "INFO: Slackware-style config detected."
413        keyfile=/etc/rc.d/rc.keymap
414    elif [ -e "/etc/rc.config" ] ; then
415        LogFile "INFO: Debian-style config detected."
416        keyfile=/etc/rc.config
417    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
418        LogFile "INFO: Debian-style config detected."
419        mkdir -p $bigdir/tmp
420        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
421        KBDEPTH=0
422        mkdir -p $bigdir/etc/console
423        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
424        echo ""
425        echo -e "$DONE"
426        return 0
427    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
428        LogFile "INFO: Ubuntu-style config detected."
429        mkdir -p $bigdir/tmp
430        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
431            kbdfile="/etc/console-setup/boottime.kmap.gz"
432        else
433            kbdfile="/etc/console-setup/cached.kmap.gz"
434        fi
435        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
436        KBDEPTH=0
437        mkdir -p $bigdir/etc/console-setup
438        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
439        echo ""
440        echo -e "$DONE"
441        return 0
442    elif [ -e "/etc/rc.conf" ] ; then
443        LogFile "INFO: ArchLinux config detected."
444        keyfile=/etc/rc.conf
445    elif [ -e "/etc/conf.d/keymaps" ] ; then
446        LogFile "INFO: Gentoo-style config detected."
447        keyfile=/etc/conf.d/keymaps
448    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
449        LogFile "INFO: X11-style config detected."
450        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
451    else
452        LogFile "Searching for rc.config ..."
453        keyfile=`find /etc -name rc.config | head -n1`
454        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
455            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
456            return
457        else
458            LogFile "INFO: Found $keyfile"
459        fi
460    fi
461    if [ ! -e "$KEYDIR/keymaps" ] ; then
462        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
463        return
464    fi
465    LogFile "INFO: keyfile=$keyfile"
466    # For SLES we need to remove the .map.gz extension Cf #614
467    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
468    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
469    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
470    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
471    LogFile "INFO: locale=$locale"
472    #
473    # Process the keymaps dir once for all
474    # AddKeyboardMappingFile will use it recursively
475    #
476    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
477    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
478    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
479    # If we have multiple keymaps then log it !!
480    echo "$mp" | grep -q " " >> $LOGFILE
481    if [ $? -eq 0 ]; then
482        LogAll "WARNING: Multiple keymaps found: $mp"
483        LogFile "INFO: The following one will be used"
484    fi
485    for i in $mp ; do
486        mappath=$i
487        [ -e "$i" ] && [ ! -d "$i" ] && break
488    done
489    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
490        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
491    fi
492    LogFile "INFO: mappath = $mappath"
493    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
494        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
495        return
496    fi
497    LogAll "INFO: Adding the following keyboard mapping tables: "
498    mkdir -p $bigdir/tmp
499    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
500    KBDEPTH=0
501    AddKeyboardMappingFile $mappath
502    echo ""
503    echo -e "$DONE"
504    rm -f $MINDI_TMP/keymaps.find
505    return 0
506}
507
508
509FindLdlinux32Binary() {
510    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
511    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
512    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
513    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
514    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
515    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
516    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
517    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
518    if [ ! -e "$LDLINUXC32" ]; then 
519        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
520        LDLINUXC32=/tmp/idoesnthopefullyexist
521    else
522        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
523    fi
524}
525
526
527FindMboot32Binary() {
528    MBOOTC32=/usr/lib/syslinux/mboot.c32
529    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
530    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
531    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
532    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
533    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
534    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
535    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
536    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
537    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
538}
539
540FindLdlinuxe64Binary() {
541    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
542    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
543    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
544    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
545    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
546    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
547    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
548    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
549    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
550}
551
552FindSyslinux64EFI() {
553    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
554    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
555    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
556    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
557    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
558    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
559    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
560    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
561    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
562}
563
564FindIsolinuxBinary() {
565    ISOLINUX=/usr/lib/isolinux.bin
566    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
567    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
568    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
569    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
570    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
571    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
572    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
573    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
574    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
575}
576
577
578GenerateGiantDependencyList() {
579    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
580
581    echo -en "Analyzing dependency requirements"
582    outfile=$1
583    tempfile=$MINDI_TMP/$$.txt
584    incoming=`ReadLine`
585
586    > $tempfile
587    progress=0
588    res=0
589    noof_lines=$2
590    while [ "$incoming" != "" ] ; do
591        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
592            incoming=`ReadLine`
593            continue
594        fi
595        if [ "$incoming" = "LVMFILES:" ] ; then
596            break
597        fi
598        filelist=`GenerateListForFile "$incoming"`
599        r=$?
600        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
601        res=$(($res+$r))
602#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
603        for fname in $filelist ; do
604            [ "$fname" != "" ] && echo "$fname" >> $tempfile
605        done
606        progress=$(($progress+1))
607        LogProgress $progress $noof_lines
608        incoming=`ReadLine`
609    done
610    if  [ "$incoming" = "LVMFILES:" ] ; then
611        incoming=`ReadLine`
612        lvmversion=""
613        while [ "$incoming" != "" ] ; do
614            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
615                incoming=`ReadLine`
616                continue
617            fi
618            filelist=`GenerateListForFile "$incoming"`
619            for tool in $filelist ; do
620                lvmresolved=`readlink -f $tool`
621                if [ "$tool" = "$lvmresolved" ]; then
622                    echo "$tool" >> $tempfile
623                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
624                    if [ "$lvmversion" = "" ] ; then
625                        lvmversion=`$lvmresolved`
626                        echo "$lvmresolved" >> $tempfile
627                    fi
628                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
629                    if [ "$lvmversion" = "200" ]; then
630                        # pvdata and lvmcreate_initrd don't exist in LVM2
631                        case "$toolstripped" in
632                        "pvdata")
633                            continue
634                            ;;
635                        "lvmcreate_initrd")
636                            continue
637                            ;;
638                        esac
639                    fi
640                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
641                    if [ -e "$toolpath" ] ; then
642                        echo "$toolpath" >> $tempfile
643                        echo "$tool" >> $tempfile
644                    else
645                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
646                    fi
647                    if [ -e "$toolpath" ] ; then
648                        echo "$toolpath" >> $tempfile
649                        echo "$tool" >> $tempfile
650                    else
651                        echo "Where are your LVM-Tools? Couldn't find $tool"
652                    fi
653                else
654                    echo "$tool" >> $tempfile
655                fi
656            done
657            progress=$(($progress+1))
658            LogProgress $progress $noof_lines
659            incoming=`ReadLine`
660        done
661    fi
662    echo -en "$DONE\nMaking complete dependency list"
663
664    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
665    mv -f $tempfile.new $tempfile
666    > $outfile.pre
667    progress=0
668    noof_lines=`cat $tempfile | wc -l`
669    LogFile "---------------------------------"
670    LogFile "List of dependencies:             "
671    LogFile "---------------------------------"
672    for fname in `cat $tempfile` ; do
673        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
674        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
675        progress=$(($progress+1))
676        LogProgress $progress $noof_lines
677    done
678    if [ _"$MONDO_SHARE" != _"" ]; then
679        mkdir -p $bigdir/tmp
680        mkdir -p $bigdir/usr/bin
681        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
682            LogAll "\nINFO: Incorporating post-nuke tarball"
683            old_pwd=`pwd`
684            cd "$bigdir"
685            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
686            cd "$old_pwd"
687        fi
688        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
689            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
690        else
691            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
692            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
693            LogIt "       If Mindi was called by Mondo then send a bug report."
694            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
695            LogIt "       Finally, run Mindi again."
696            Die "Odd."
697        fi
698        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
699        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
700            LogAll "\nINFO: Incorporating Network-related settings"
701            for r in NETFS-* ; do
702                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
703                LogFile "INFO: Copying $r to ramdisk"
704            done
705        fi
706    fi
707    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
708    rm -f $tempfile $outfile.pre
709    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
710    return $res
711}
712
713
714GenerateListForFile() {
715    local files_found loc fname incoming i res
716    incoming="$1"
717    files_found=""
718    res=0
719
720    for fname in $incoming ; do
721        files_found="$files_found `LocateFile $fname`"
722    done
723
724    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
725}
726
727
728# Returns all disk devices which are part of a raid array
729GetAllRaidMembers() {
730    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
731}
732
733
734GetFileSizeList() {
735    local i
736    for i in `find $1 -type d -o -print` ; do
737        du -sk $i
738    done
739}
740
741
742# Check kernel filesystem capabilites for accessing initrd image
743# Could be ext2 FS (old mode) or initramfs (new mode)
744#
745# Interface definition:
746# param #1: absolute path to kernel image
747GetInitrdFilesystemToUse() {
748
749    # interface test: make sure we have one parameter
750    if [ $# -ne 1 ]; then
751        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
752    fi
753
754    # interface parameters
755    local lvKernelImage=$1
756
757    # local constants (filesystem magic strings)
758    local lcMagicCramfs="<3>cramfs: wrong magic"
759    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
760    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
761    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
762
763    # local variables
764    local lvOffset
765    local lvScanRes
766    local lvUseFilesystem
767
768    # say where we are.
769    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
770
771    # verify that file exists
772    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
773
774    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
775    file $lvKernelImage 2>&1 | grep -q gzip
776    if [ $? -eq 0 ]; then
777        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
778        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
779    else
780        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
781        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
782        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
783        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
784        if [ $lvOffset -eq 0 ]; then
785            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
786            lvScanRes=$lcMagicInitfs
787        else
788            lvOffset=`expr $lvOffset / 2`
789            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
790            # scan again  kernel image
791            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
792        fi
793    fi
794
795    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
796    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
797        lvUseFilesystem="ext2fs"
798    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
799        lvUseFilesystem="ext3fs"
800    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
801        lvUseFilesystem="initramfs"
802    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
803        lvUseFilesystem="cramfs"
804    else
805        # In that case, we are most probably after 2.6.30 and use the supported initramfs
806        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
807        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
808        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
809        lvUseFilesystem="initramfs"
810    fi
811
812    # say what we are using
813    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
814
815    # return file system to use
816    echo "$lvUseFilesystem"
817
818}
819
820# Searches members of raid device
821# $1: raid device (/dev/md...)
822GetRaidDevMembers() {
823    if [ ! -f /etc/raidtab ]; then 
824        return
825    fi
826    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
827}
828
829
830ListAllPartitions() {
831    local res currline partition all_partitions ap_orig remaining i j
832
833    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
834    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
835    if [ -e "/vmfs/volumes" ]; then
836        # For VMWare ESX 3 get the device names of these volumes
837        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
838    fi
839    return
840}
841
842
843ListImagesForUser() {
844    local path fname
845    path=$MINDI_CACHE
846    echo -en "In the directory '$path' you will find the images:-\n"
847    for fname in `ls $path | grep -F mindi-` ; do
848        printf "%19s " $fname
849    done
850    echo " "
851}
852
853
854ListKernelModulePaths() {
855    local module_list module fname r kern
856    module_list="$MODULES"
857    # Remove unwanted modules from list
858    for i in $DENY_MODS; do
859        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
860    done
861###
862### Sq-Modification ... Use kernelname for module search path if specified
863###
864    if [ "${kernelname}" != "" ]
865    then
866        kern=${kernelname}
867    else
868        kern="$KERVERRUN"
869    fi
870    export KERVER=$kern
871###
872### Sq-Mod End
873###
874    # Get rid of duplicates
875    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
876        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
877        if [ -z "$r" ]; then
878            if [ "`echo "$MODULES" | grep -w $module`" ]; then
879                r="[live module file not found]"
880            else
881                r="[extra module file not found]"
882            fi
883        else
884            [ -f "$r" ] && echo "$r"
885        fi
886        LogFile "INFO: module $module --> $r"
887    done
888    find /lib/modules/$kern/modules.* -type f 2> /dev/null
889}
890
891#
892# Critical function which computes all dependencies (dyn. lib.)
893# for a list of binaries
894#
895LocateDeps() {
896    local incoming fname deps
897    incoming="$*"
898    deps=""
899
900    for fname in $incoming ; do
901        if [ ! -e "$fname" ] ; then
902            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
903            if echo $fname | grep lvm &> /dev/null ; then
904                LogFile "          This warning only affects you if you are using LVM."
905                if echo "$MODULES" | grep lvm &> /dev/null ; then
906                    LogFile "          I think you are, so please take heed!"
907                else
908                    LogFile "          I don't think you are, so don't worry about it."
909                fi
910            fi
911        else
912            deps="$deps $fname" 
913        fi
914    done
915    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
916}
917
918
919LocateFile() {
920    local i j path fname_to_find location output resolved tmp stub cache_id loclist
921    fname_to_find="$1"
922    # It's an absolute path
923    j=`echo "$fname_to_find" | cut -c1`
924    if [ _"$j" = _"/" ]; then
925        dn=`dirname $fname_to_find`
926        # We suppose that the link is already included, just add the new file
927        if [ -h "$dn" ]; then
928            newdn=`readlink -f $dn`
929            bn=`basename $fname_to_find`
930            output="$newdn/$bn"
931        else
932            output="$fname_to_find"
933        fi
934        if [ -h "$output" ] ; then
935            output="`mr-read-all-link $output` $output"
936        fi
937        echo "$output"
938        return 0
939    fi
940    # It's not an absolute path
941    output=""
942    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
943    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
944        [ -h "$path" ] && continue
945        [ ! -e "$path/$fname_to_find" ] && continue
946        output="$path/$fname_to_find $output"
947        if [ -h "$path/$fname_to_find" ] ; then
948            output="`mr-read-all-link $path/$fname_to_find` $output"
949        fi
950    done
951    if [ "$output" = "" ] ; then
952        return 1
953    fi
954    echo "$output"
955    return 0
956}
957
958LogProgress() {
959    local i progress modres noof_lines title
960 
961    progress=$1
962    noof_lines=$2
963    title=$3
964
965    i=$(($progress*100))
966    if [ $noof_lines -ne 0 ]; then
967        i=$(($i/$noof_lines))
968    else
969        i=0
970    fi
971
972    if [ _"$MONDO_SHARE" != _"" ]; then 
973        echo "$title        $i%"
974    else
975        echo -en "\r\t\t\t\t\t\t\t\t"
976        echo -en "$i"
977        echo -en "%"
978        modres=$(($progress%4))
979        [ "$modres" -eq "0" ] && echo -en "\t/"
980        [ "$modres" -eq "1" ] && echo -en "\t-"
981        [ "$modres" -eq "2" ] && echo -en "\t\\"
982        [ "$modres" -eq "3" ] && echo -en "\t|"
983    fi
984}
985
986# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
987MakeMondoConfigFile() {
988    local outfile use_lzo use_comp use_star
989    outfile=$1
990    > $outfile
991    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
992    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
993    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
994    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
995    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
996    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
997    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
998    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
999    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
1000    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1001    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1002    echo "use-lzo $use_lzo" >> $outfile
1003    echo "use-gzip $use_gzip" >> $outfile
1004    echo "use-star $use_star" >> $outfile
1005    echo "use-lzma $use_lzma" >> $outfile
1006    echo "use-comp $use_comp" >> $outfile
1007    echo "boot-type $BOOT_TYPE" >> $outfile
1008    echo "datestamp `date`" >> $outfile
1009    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1023
1024    # Deal with network configuration in a portable way
1025    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1026        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1027    fi
1028}
1029
1030# Get PV's for an LV
1031GetPVsForLV() {
1032    if [ -n "$1" ]; then
1033        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1034        if [ -z "$vg" ]; then
1035            return
1036        fi
1037        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1038    fi
1039}
1040
1041
1042MakeMountlist() {
1043    local mountlist all_partitions current_partition \
1044partition_size partition_format outstring partition_number \
1045partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1046absolute_partition old_partition_fmt current_lvolume uname skip
1047
1048    LogFile "------------------------------------"
1049    LogFile "Your raw fstab file looks like this:"
1050    LogFile "------------------------------------"
1051    cat $MY_FSTAB >> $LOGFILE
1052    LogAll "-----------------------------------"
1053    LogAll "Your mountlist will look like this:"
1054    LogAll "-----------------------------------"
1055
1056# mountlist(OUT)
1057    mountlist=$1
1058
1059# NB: partition = device
1060# NB: mountpt = where the device is mounted
1061
1062    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1063
1064    [ "$mountlist" != "" ] && rm -Rf $mountlist
1065    > $mountlist
1066    all_partitions=""
1067   
1068    if [ $LVM != "false" ]; then
1069        LogFile "INFO: Analyzing LVM..."
1070        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1071        if [ $? -ne 0 ]; then
1072            LVM="false"
1073        fi
1074        # Excluded LVs and GVs are not reported here
1075        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1076    fi
1077    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1078    for i in $IMAGE_DEVS ; do
1079        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1080    done
1081    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1082    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1083    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1084    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1085    for c_p in $all_partitions ; do
1086        # Skip fd/cd devices, network FS, cifs
1087        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1088        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1089        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1090            current_partition=`readlink -f $c_p`
1091            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1092                current_partition="$c_p"
1093            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1094                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1095                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1096            fi
1097            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1098        else
1099            current_partition="$c_p"
1100        fi
1101        [ "$c_p" = "none" ] && continue
1102        redhat_label=""
1103        label=""
1104        uuid=""
1105        absolute_partition=`readlink -f $c_p`
1106        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1107
1108        # set default in case we dont't find it
1109        str_to_find_fmt_with=$current_partition
1110
1111        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1112        # current_partition contains only first column of /etc/fstab
1113        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1114            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1115            actual_dev=""
1116
1117            # 1st try, findfs - the RHEL way of finding labels and their partitions
1118            if [ -x "/sbin/findfs" ]; then
1119                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1120            fi
1121   
1122            # 2nd try : blkid, the good way for all LABEL except swap
1123            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1124                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1125                # For LVM FS it will give a /dev/dm-# which should then be converted
1126                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1127                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1128                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1129                    for dev in `ls /dev/mapper/*`; do
1130                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1131                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1132                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1133                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1134                            break
1135                        fi
1136                    done
1137                fi
1138            fi
1139   
1140            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1141            # For LVM gives a /dev/mapper entry
1142            if [ "x$actual_dev" = "x" ]; then
1143                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1144            fi
1145   
1146            # 4th try, with vol_id
1147            # SWAP only
1148            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1149                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1150                for dev_swap in $list_swaps ; do
1151                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1152                    if [ "x$dev_exists" != "x" ]; then
1153                        actual_dev=$dev_swap
1154                        break;
1155                    fi
1156                done
1157            fi
1158
1159            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1160            # LABEL=SW-cciss/c0d0p3 (RDP)
1161            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1162            # SWAP only
1163            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1164                    skip=""
1165                    uname=$KERVERRUN
1166                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1167                    # 2.6.12 needs 16 (FC3)
1168                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1169                    # 2.6.19 and upper needs 1052
1170                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1171                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1172                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1173                    if [ $skip = "" ]; then
1174                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1175                    fi
1176                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1177                    do
1178                        # Location of the swap label for kernel 2.6
1179                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1180                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1181                            actual_dev=$try_dev
1182                        fi
1183                    done
1184            fi
1185
1186            # Check if one of all those tries has known success
1187            if [ "x$actual_dev" != "x" ]; then
1188                current_partition=$actual_dev
1189            else
1190                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1191            fi
1192        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1193        # current_partition contains only first column of /etc/fstab
1194        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1195            uuid=`echo "$current_partition" | cut -d'=' -f2`
1196            actual_dev=""
1197
1198            # 1st try, findfs - the RHEL way of finding labels and their partitions
1199            if [ -x "/sbin/findfs" ]; then
1200                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1201            fi
1202   
1203            # 2nd try : blkid, the good way for all UUID except swap
1204            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1205                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1206                # For LVM FS it will give a /dev/dm-# which should then be converted
1207                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1208                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1209                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1210                    for dev in `ls /dev/mapper/*`; do
1211                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1212                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1213                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1214                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1215                            break
1216                        fi
1217                    done
1218                fi
1219            fi
1220   
1221            # 3th try, with vol_id
1222            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1223                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1224                for dev in $list_dev ; do
1225                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1226                    if [ "x$dev_exists" != "x" ]; then
1227                        actual_dev=$dev
1228                        break;
1229                    fi
1230                done
1231            fi
1232
1233            # 4th try, with dumpuuid (VMWare only ?) for swap
1234            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1235                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1236                for dev in $list_dev ; do
1237                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1238                    if [ "x$dev_exists" != "x" ]; then
1239                        actual_dev=$dev
1240                        break;
1241                    fi
1242                done
1243            fi
1244
1245            # Check if one of all those tries has known success
1246            if [ "x$actual_dev" != "x" ]; then
1247                current_partition=$actual_dev
1248            else
1249                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1250            fi
1251        else
1252            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1253            # they use symlinks in fstab unrelated to what is shown in mount !
1254            if [ _"$partition_mountpt" = _"" ]; then
1255                # set default in case we dont't find it
1256                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1257                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1258                            str_to_find_fmt_with=$tmpp
1259                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1260                            break;
1261                        fi
1262                done
1263            fi
1264        fi
1265
1266        # Detects noauto partitions not mounted and exclude them
1267        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1268        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1269                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1270            continue
1271        fi
1272        # Detects bind partitions and exclude them
1273        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1274                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1275            continue
1276        fi
1277
1278        # Look for devices which have to be excluded
1279        skip=0
1280        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1281            l=""
1282            list_of_devices="`mr-read-all-link $current_partition`"
1283            for d in $list_of_devices; do
1284                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1285            done
1286
1287            # Remove PVs from LVs excluded
1288            l="$l `GetPVsForLV $current_partition`"
1289
1290            # We want a single unique list
1291            list_of_devices="`echo $l | sort -u`"
1292
1293            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1294                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1295                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1296                    skip=1
1297                    continue
1298                fi
1299            done
1300        fi
1301        if [ $skip -eq 1 ]; then
1302            continue
1303        fi
1304
1305        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1306        # Detects iso9660 ISO images and exclude them
1307        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1308                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1309            continue
1310        fi
1311        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1312        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1313        # the former is then a link to the latter, so we test whether
1314        # $current_partition is actually such a link or not and set
1315        # $current_lvolume accordingly. On Debian you may find more than one answer
1316        # so we remove the one corresponding to /dev/.static
1317        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1318        # principle is the same and we need to find the link to it as well.
1319        # Note that $current_lvolume may well be an
1320        # ordinary device. It is just to make sure that we feed the right value
1321        # into any of the LVM tools if possible.
1322
1323        current_lvolume="$current_partition"
1324        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1325            # .static dir are a Debian specificity
1326            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1327            echo $current_lvolume | grep -q ' '
1328            if [ $? -eq 0 ]; then
1329                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1330            fi
1331            # if it's not found, it may well be a real device such as a multipath one
1332            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1333            if [ _"$current_lvolume" = _"" ]; then
1334                current_lvolume="$current_partition"
1335            fi
1336        fi
1337        #
1338        # End of LVM device style variation code (other than $current_lvolume).
1339
1340        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1341            # Size computed via LVM not directly
1342            partition_size="lvm"
1343        else
1344            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1345            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1346            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1347                # Skip swap files
1348                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1349                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1350                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1351                [ "$partition_format" != "swap" ] && partition_format="swap"
1352                if [ "$partition_size" = "" ] ; then
1353                    totalsize=0
1354                    items=0
1355                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1356                        totalsize=$(($totalsize+$i))
1357                        items=$(($items+1))
1358                    done
1359                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1360                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1361                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1362                fi
1363            else
1364                partition_size=`SizeOfPartition $current_partition`
1365            fi
1366        fi
1367        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1368        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1369        if [ "$partition_mountpt" = "" ] ; then
1370            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1371                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1372                    partition_mountpt="raid"
1373                    partition_format="raid"
1374                else
1375                    partition_mountpt="lvm"
1376                    partition_format="lvm"
1377                fi
1378            fi
1379        fi
1380        psz=$partition_size
1381        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1382        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1383        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1384            partition_mountpt="image"
1385            old_partition_fmt=$partition_format
1386            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1387            partition_size=$(($partition_size+1)); # just in case
1388            if [ "$partition_format" = "Linux" ] ; then
1389                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1390                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1391                partition_format=$old_partition_fmt
1392            fi
1393        fi
1394
1395        if [ ! "$partition_mountpt" ] ; then
1396            LogFile "------- $FDISK -l $qq log ------------"
1397            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1398                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1399                [ "$partition_format" ] && break
1400            done
1401            LogFile "------- $FDISK log end ------------"
1402            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1403                partition_format="compaq"
1404            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1405                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1406                continue
1407            fi
1408        fi
1409        if [ "$redhat_label" ]; then
1410            label="$redhat_label"
1411        elif [ "$uuid" ]; then
1412            label="$uuid"
1413        fi
1414
1415        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1416        # in order to mount the root part e.g. in grub.
1417        # One way to solve this is to add the UUID now, if there wasn't one so it's
1418        # restored correctly
1419        if [ _"$label" = _"" ]; then
1420            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1421        fi
1422
1423        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1424        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1425        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1426        if [ "$current_partition" = "" ] ; then
1427            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1428        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1429            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1430                partition_mountpt=raid
1431                partition_format=raid
1432                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1433                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1434            else
1435                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1436            fi
1437        elif [ "$partition_format" = "" ] ; then
1438            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1439        elif [ "$partition_size" = "" ] ; then
1440            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1441        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1442            continue
1443        else
1444            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1445                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1446                partition_format="vfat"
1447            fi
1448            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1449            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1450        fi
1451    done
1452    LogAll "-----------------------------------" 
1453}
1454
1455CheckMountlist() {
1456    local file=$1
1457    # Coherency verification
1458    ML01=`cat $file | wc -l`
1459    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1460    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1461    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1462    if [ "$ML01" -ne "$ML1" ]; then
1463        LogFile "--------------------------------------------"
1464        LogAll "WARNING: Duplicate device entry in mountlist"
1465        LogFile "--------------------------------------------"
1466    fi
1467    if [ "$ML02" -ne "$ML2" ]; then
1468        LogFile "--------------------------------------------"
1469        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1470        LogFile "------------------------------------------------"
1471    fi
1472}
1473
1474OfferToMakeBootableISO() {
1475    local i old_pwd files
1476    if [ -z "$ISO_CMD" ]; then
1477        LogAll "ERROR: Neither mkisofs nor genisoimage nor xorriso found, unable to make CD image"
1478        return
1479    fi
1480    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1481        echo -en "Shall I make a bootable CD image? (y/[n]) "
1482        read i
1483        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1484    fi
1485    rm -Rf $MINDI_TMP/iso
1486    mkdir -p $MINDI_TMP/iso/{images,archives}
1487    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1488    cp -f $files $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy files to $MINDI_TMP/iso/images"
1489    for i in memdisk memtest.bin memtest.img ; do
1490        j=$MINDI_LIB/$i
1491        k=$MINDI_TMP/iso
1492        if [ -e "$j" ] ; then
1493            LogAll "INFO: Copying $j to $k"
1494            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1495            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1496            if [ _"$MONDO_SHARE" != _"" ]; then 
1497                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1498            fi
1499        fi
1500    done
1501
1502    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1503    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1504
1505    # copy boot stuff now generated in PrepareDataDiskImage
1506    if [ "$BOOT_TYPE" = "UEFI" ]; then
1507        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1508        tbc="EFI"
1509    else
1510        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1511        tbc="syslinux"
1512    fi
1513
1514    MakeMessageFile $MINDI_TMP/iso/$tbc | cut -c1-80 > $MINDI_TMP/iso/$tbc/message.txt
1515
1516    if [ "$ARCH" != "ia64" ] ; then
1517        if [ $KERNEL_IS_XEN = "yes" ]; then
1518            FindMboot32Binary
1519            cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1520            cp $MBOOTC32 $MINDI_TMP/iso/$tbc/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/$tbc/mboot.c32). Did you run out of disk space?"
1521        fi
1522
1523        cp $ISOLINUX $MINDI_TMP/iso/$tbc/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1524
1525        if [ -e "$LDLINUXC32" ]; then
1526            cp $LDLINUXC32 $MINDI_TMP/iso/$tbc 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $MINDI_TMP/iso/$tbc. Did you run out of disk space?"
1527        fi
1528
1529        if [ _"$MONDO_SHARE" != _"" ]; then 
1530            cp -rf $MINDI_TMP/iso/{initrd.img,vmlinuz,$tbc} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1531            if [ $KERNEL_IS_XEN = "yes" ]; then
1532                cp -f $MINDI_TMP/iso/xen.gz $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen kernel to $MONDO_ROOT. Did you run out of disk space?"
1533            fi
1534            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1535        fi
1536        CMD="$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1537    else
1538        CMD="$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.img -c images/boot.cat -no-emul-boot"
1539    fi
1540
1541    old_pwd=`pwd`
1542    cd "$MINDI_TMP/iso"
1543    LogFile "Invoking $CMD"
1544    $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1545    if [ "$?" -ne "0" ] ; then
1546        if [ "$BOOT_TYPE" = "UEFI" ]; then
1547            CMD=`echo $CMD | perl -p -e 's|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |'`
1548            $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1549            if [ "$?" -eq "0" ] ; then
1550                LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1551            else
1552                MakeISOErrors
1553            fi
1554        else
1555            MakeISOErrors
1556        fi
1557    else
1558        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1559    fi
1560    rm -f $MINDI_TMP/mkisofs.log
1561    cd "$old_pwd"
1562}
1563
1564MakeISOErrors() {
1565
1566LogFile "----------- $ISO_CMD's errors --------------"
1567LogAll "$CMD returned the following errors:"
1568cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1569LogAll "ERROR: Failed to create ISO image."
1570}
1571
1572
1573OfferToMakeBootableUSB() {
1574    local i files
1575    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1576        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1577        read i
1578        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1579        if [ "$USBDEVICE" = "" ]; then
1580            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1581            read dev
1582            USBDEVICE=$dev
1583        fi
1584        echo "WARNING: This will erase all content on $USBDEVICE"
1585        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1586        read i
1587        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1588    fi
1589    rm -Rf $MINDI_TMP/usb
1590    mkdir -p $MINDI_TMP/usb
1591    USBPART="${USBDEVICE}1"
1592
1593    echo -en "Transforming $USBDEVICE in a Bootable device " 
1594    echo -en "."
1595    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1596    LogFile "INFO: Checking $USBDEVICE"
1597    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1598    if [ $? -ne 0 ]; then
1599        LogAll "ERROR: Unable to access $USBDEVICE"
1600        LogAll "       Make sure your USB device is plugged in"
1601        MindiExit -1
1602    fi
1603    echo -en "."
1604    # Some distro do auto mount at that point (Ubuntu)
1605    LogFile "INFO: Unmounting $USBPART just in case"
1606    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1607    if [ "$BOOT_TYPE" = "BIOS" ]; then
1608        # If your key has no MBR it may cause an issue
1609        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1610        if [ -r $MBRFILE ]; then
1611            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1612            dd if=$MBRFILE of=$USBDEVICE
1613        else
1614            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1615            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1616        fi
1617    fi
1618    LogFile "INFO: Preparing $USBDEVICE"
1619    cat > $MINDI_TMP/fdisk.txt << EOF
1620d
1621d
1622d
1623d
1624n
1625p
16261
1627
1628
1629t
1630b
1631a
16321
1633w
1634EOF
1635    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1636    if [ $? -ne 0 ]; then
1637        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1638        LogAll "       Make sure your USB device is plugged in"
1639        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1640        MindiExit -1
1641    fi
1642    LogFile "fdisk build file"
1643    LogFile "----------------"
1644    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1645    LogFile "----------------"
1646    rm -f $MINDI_TMP/fdisk.txt
1647    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1648    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1649    echo -en "."
1650    # Calling kpartx in case devices were not created
1651    if [ -x "/sbin/kpartx" ]; then
1652        /sbin/kpartx -a $USBDEVICE
1653    fi
1654    # Some distro do auto mount at that point (Ubuntu)
1655    LogFile "INFO: Unmounting $USBPART just in case again"
1656    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1657    echo -en "."
1658    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1659    if [ "`which dmsetup`" != "" ]; then
1660        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1661        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1662            LogFile "INFO: Removing $block_id from device mapper."
1663            sleep 1
1664            dmsetup remove $block_id
1665        fi
1666    fi
1667    echo -en "."
1668    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1669    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1670    if [ $? -ne 0 ]; then
1671        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1672        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1673        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1674        MindiExit -1
1675    fi
1676    echo -en "."
1677    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1678    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1679    if [ $? -ne 0 ]; then
1680        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1681        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1682        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1683        MindiExit -1
1684    fi
1685    echo -en "."
1686    mkdir -p $MINDI_TMP/usb/images
1687    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1688    cp -f $files $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy files to $MINDI_TMP/usb/images"
1689    echo -en "."
1690    for i in memdisk memtest.bin memtest.img ; do
1691        j=$MINDI_LIB/$i
1692        k=$MINDI_TMP/usb
1693        if [ -e "$j" ] ; then
1694            LogFile "INFO: Copying $j to $k"
1695            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1696            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1697        fi
1698    done
1699    echo -en "."
1700    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1701    echo -en "."
1702    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1703    echo -en "."
1704    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1705    echo -en "."
1706    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1707    echo -en "."
1708    LogAll "----------- syslinux's conf --------------"
1709    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1710    LogAll "------------------------------------------"
1711    umount $MINDI_TMP/usb
1712    if [ "$ARCH" != "ia64" ] ; then
1713        syslinux -v 2>&1 | grep -q 4.02
1714        if [ $? -eq 0 ]; then
1715            # This buggy version of syslinux requires a call to --stupid and not -s
1716            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1717            res=$?
1718        else
1719            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1720            res=$?
1721        fi
1722        if [ $res -ne 0 ] ; then
1723            LogAll "----------- syslinux's errors --------------"
1724            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1725            LogAll "------------------------------------------"
1726            LogIt "ERROR: Failed to create USB image."
1727        else
1728            echo -e "$DONE"
1729            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1730        fi
1731        rm -f $MINDI_TMP/syslinux.log
1732    else
1733        LogAll "ERROR: No USB boot support for ia64"
1734        MindiExit -1
1735    fi
1736}
1737
1738
1739MakeMessageFile() {
1740   
1741    if [ -x "/bin/lsb_release" ]; then
1742        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1743    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1744        DESC="Arch Linux"
1745        if [ -r /var/log/pacman.log ]; then
1746            # there are no releases but we can get the last system upgrade
1747            # Output example:   Arch Linux [2011-03-03 01:39]
1748            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1749        fi
1750    elif [ -x "/etc/os-release" ]; then
1751        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1752    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1753        # For pb >= 0.9.8
1754        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1755    elif [ -r /etc/issue.net ]; then
1756        DESC=`head -1 /etc/issue.net`
1757    elif [ -r /etc/issue ]; then
1758        DESC=`head -1 /etc/issue`
1759    else
1760        DESC="Unknown desc"
1761    fi
1762    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1763    if [ _"$MONDO_SHARE" != _"" ]; then
1764        if [ "$CDRECOVERY" != "yes" ] ; then
1765            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1766                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1767                echo -en "$BOOT_MEDIA_MESSAGE"
1768            elif [ ! "$MINDI_TMP" ] ; then
1769                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1770                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1771                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1772                fi
1773            else
1774                echo -en "$BOOT_MEDIA_MESSAGE"
1775            fi
1776        else
1777            echo -en "\
1778To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1779CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1780        fi
1781    fi
1782
1783    # Also create the other help screens
1784    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1785    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1786    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1787}
1788
1789
1790MakeBootConfFile() {
1791    local options i ooo
1792    options=""
1793    # Type of boot file (elilo or syslinux/isolinux)
1794    type=$1
1795    if [ "$type" = "elilo" ]; then
1796        sep="="
1797        sepdef="="
1798    else
1799        sep=" "
1800        sepdef=" "
1801        if [ "$type" = "grub" ]; then
1802            sepdef="="
1803        fi
1804    fi
1805
1806    # Generic header for conf file
1807    if [ "$type" = "elilo" ]; then
1808        echo -en "prompt\n"
1809    elif [ "$type" = "grub" ]; then
1810        echo -en "pause Press a key when ready to restore\n"
1811    else
1812        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1813    fi
1814
1815    # Compute which default option to boot from
1816    echo -en "default${sepdef}"
1817    if [ "$CDRECOVERY" = "yes" ] ; then
1818        if [ "$type" = "grub" ]; then
1819            # TODO: Which num ???
1820            echo -en "0\n"
1821        else
1822            echo -en "RESTORE\n"
1823        fi
1824    # In case it's mondoarchive
1825    elif [ _"$MONDO_SHARE" != _"" ]; then
1826        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1827            if [ "$type" = "grub" ]; then
1828                echo -en "3\n"
1829            else
1830                echo -en "iso\n"
1831            fi
1832        else
1833            if [ "$type" = "grub" ]; then
1834                echo -en "1\n"
1835            else
1836                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1837            fi
1838        fi
1839    else
1840        if [ "$type" = "grub" ]; then
1841            echo -en "0\n"
1842        else
1843            echo -en "expert\n"
1844        fi
1845    fi
1846
1847    # Handle timeout
1848    if [ "$CDRECOVERY" != "yes" ] ; then
1849        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1850    else
1851        echo -en "timeout${sep}10000\n"
1852    fi
1853    echo -en "\n"
1854
1855    # prepare which labels will be generated
1856    if [ "$CDRECOVERY" = "yes" ] ; then
1857        options="RESTORE expert"
1858    else
1859        if [ _"$MONDO_SHARE" != _"" ]; then
1860            options="interactive expert compare iso nuke isonuke"
1861        else
1862            options="expert"
1863        fi
1864    fi
1865
1866    # Generate rest of conf file
1867    for i in $options ; do
1868        ooo=$i
1869        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1870        if [ "$type" = "elilo" ]; then
1871            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1872        elif [ "$type" = "grub" ]; then
1873            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
1874        else
1875            ps="/"
1876            if [ $KERNEL_IS_XEN = "no" ]; then
1877                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1878            else
1879                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1880            fi
1881        fi
1882        echo -en "$outstr"
1883    done
1884    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1885        if [ "$type" = "elilo" ]; then
1886            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1887            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1888        elif [ "$type" = "grub" ]; then
1889            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
1890        else
1891            ps="/"
1892            if [ "$type" = "syslinux" ]; then
1893                ps=""
1894            fi
1895            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1896            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1897        fi
1898    fi
1899}
1900
1901PrepareBootDiskImage() {
1902    # LILO originally
1903    local dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootconf bootimage
1904    kernelpath=$1
1905    retval=0
1906
1907    old_pwd=`pwd`
1908    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1909    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1910    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1911    imagefile=$MINDI_TMP/mindi-bootroot.img
1912    mkdir -p $mountpoint
1913    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1914    echo -en "..."
1915    #if [ "$BOOT_TYPE" = "UEFI" ]; then
1916        # Should be GPT in that case to allow direct boot
1917        #parted -s $imagefile mklabel gpt
1918        #parted -s $imagefile mkpart fat32 1 ${BOOT_SIZE}k 2> /dev/null
1919        #kpartx -a $imagefile
1920        #imagefile2=/dev/mapper/`kpartx -l $imagefile | awk '{print $1}'`
1921    #else
1922        #imagefile2=$imagefile
1923    #fi
1924    LogFile "INFO: Creating vfat filesystem on $imagefile"
1925    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1926
1927    if [ "$BOOT_TYPE" = "BIOS" ]; then
1928        # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1929        # and run after the formating for versions > 6 it seems
1930        syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1931    fi
1932
1933    # Only move it now to its final destination and use it now
1934    mv $imagefile $MINDI_CACHE
1935    imagefile=$MINDI_CACHE/mindi-bootroot.img
1936
1937    mount -t vfat -o loop $imagefile $mountpoint || Die "ERROR: Cannot mount $imagefile on $mountpoint (PBDI)"
1938
1939    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1940    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1941    if [ "$?" -ne "0" ] ; then
1942        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1943        LogAll "       Please unload some of your modules and try again."
1944        LogAll "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1945        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1946        retval=$(($retval+1))
1947    fi
1948    #MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1949
1950    mkdir -p $mountpoint/tmp
1951    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1952        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1953    fi
1954
1955    # copy the kernel across
1956    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1957    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1958    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1959
1960    retval=0
1961    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1962    retval=$?
1963    if [ $KERNEL_IS_XEN = "yes" ]; then
1964        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1965        let retval+=$?
1966    fi
1967 
1968    if [ "$retval" -ne "0" ] ; then
1969        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1970        du -sk $mountpoint/* >> $LOGFILE
1971        LogFile "--- end of list of files ---"
1972        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1973        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1974        cd "$old_pwd"
1975        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1976        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1977        [ "$imagefile" != "" ] && rm -f $imagefile
1978        LogIt "ERROR: Sorry, your kernel is too big for your image"
1979        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1980    fi
1981    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1982    LogFile "INFO: Free space left on image = $free_space KB"
1983    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1984
1985    # make it bootable
1986    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1987    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1988
1989    # copy boot stuff now generated in PrepareDataDiskImage
1990    if [ "$BOOT_TYPE" = "UEFI" ]; then
1991        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1992    else
1993        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1994    fi
1995
1996    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1997    echo -en "..."
1998    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1999
2000    if [ "$retval" -eq "0" ] ; then
2001        echo -en "...$DONE\n"
2002        LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2003    else
2004        echo -en "...failed\n"
2005        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2006    fi
2007    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning $retval"
2008    return $retval
2009}
2010
2011ParseModprobeForIncludes() {
2012local MODPROBE_CONF mpincfile includes include
2013
2014MODPROBE_CONF=/etc/modprobe.conf
2015mpincfile=$1
2016touch $mpincfile
2017if [ -a $MODPROBE_CONF ]; then
2018    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2019    if [ -n "$includes" ]; then
2020        for include in $includes
2021        do
2022            if [ -a "$include" ]; then
2023                echo $include >> $mpincfile
2024            fi
2025        done
2026    fi
2027fi
2028}
2029
2030
2031PrepareDataDiskImages() {
2032    local needlist bigdir diskdir res i j k old_pwd lines lfiles includefile
2033
2034    rm -f $MINDI_CACHE/mindi.iso
2035    needlist=$MINDI_TMP/what-we-need.txt
2036    bigdir=$MINDI_TMP/bigdir
2037    mkdir -p $bigdir/usr/bin
2038    mkdir -p $bigdir/usr/sbin
2039    includefile=$MINDI_TMP/$$.includefile.txt
2040
2041    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2042    if [ -e "$DEPLIST_FILE" ]; then
2043        lfiles="$DEPLIST_FILE $lfiles"
2044    fi
2045    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2046    ParseModprobeForIncludes $includefile
2047    lines=$(($lines+`cat $includefile | wc -l`))
2048    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2049    res=$?
2050    rm -f $includefile
2051    ListKernelModulePaths >> $needlist
2052    if [ "$res" -ne "0" ] ; then
2053        Die "You have $res files present in dependency list\nbut absent from filesystem."
2054    fi
2055    mkdir -p $bigdir/tmp
2056    if [ _"$MONDO_SHARE" != _"" ]; then
2057        # TODO: no reason to have the cfg file stored twice
2058        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2059        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2060    fi
2061
2062    # Needs to be done after the MRCFG creation
2063    FindAndAddUserKeyboardMappingFile
2064
2065    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2066    DropOptimizedLibraries $needlist $bigdir
2067    echo -en "Assembling dependency files"
2068
2069    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2070
2071    # also copy io.sys and msdos.sys, if we can find them
2072    for i in `mount | cut -d' ' -f3` ; do
2073        for j in io.sys msdos.sys ; do
2074            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2075        done
2076    done
2077
2078    # master boot record, too
2079    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2080    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2081        LogAll "INFO: Backing up $i's MBR"
2082        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2083        sleep 1
2084        sync
2085        j=$i
2086        [ -h "$j" ] && j=`readlink -f $j`
2087        LogAll "INFO: Creating /dev/boot_device ($j)"
2088        mkdir -p $bigdir/dev
2089        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2090    fi
2091
2092    old_pwd=`pwd`
2093    cd "$bigdir"
2094
2095    # Get terminfo content
2096    ti="usr/share/terminfo/l"
2097    if [ -d /$ti ]; then
2098        mkdir -p $ti
2099        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2100    fi
2101    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2102        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2103        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2104    fi
2105    if [ -d "/lib/dev-state" ]; then 
2106        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2107    fi
2108    cd "$old_pwd"
2109    echo -e "$DONE"
2110    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2111    MakeMountlist $MINDI_TMP/mountlist.txt
2112    CheckMountlist $MINDI_TMP/mountlist.txt
2113    mkdir -p $bigdir/tmp
2114    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2115    if [ _"$MONDO_SHARE" != _"" ]; then
2116        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2117    fi
2118    if [ $LVM != "false" ]; then
2119        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2120        if [ "$?" -ne "0" ]; then
2121            LVM="false"
2122            rm -f $bigdir/tmp/i-want-my-lvm
2123        else
2124            LogFile "Your i-want-my-lvm file content is:"
2125            LogFile "-----------------------------------"
2126            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2127            LogFile "-----------------------------------"
2128        fi
2129    fi
2130    LogFile "Your mountlist.txt file content is:"
2131    LogFile "-----------------------------------"
2132    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2133    LogFile "-----------------------------------"
2134
2135    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2136    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2137    if [ _"$MONDO_SHARE" != _"" ]; then
2138        for q in filelist.full.gz biggielist.txt ; do
2139            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2140            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2141        done
2142    fi
2143
2144    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2145    # to get it on the media (in addition to the boot part
2146    # and also to support UEFI boot mechanism
2147    bootdir=$bigdir/syslinux
2148    bootconf="$bootdir/syslinux.cfg"
2149    boottype=syslinux
2150    mkdir -p $bootdir
2151    if [ "$BOOT_TYPE" != "BIOS" ]; then
2152        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2153            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2154            MindiExit -1
2155        fi
2156        # EFI or UEFI
2157        # TODO: names are hard-coded for now
2158        if [ "$BOOT_TYPE" = "UEFI" ]; then
2159            # UEFI
2160            efidir=$bigdir/EFI/BOOT
2161            # On RHEL6 grub works
2162            dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2163            dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2164            if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2165                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2166                bootconf="$efidir/grub.conf"
2167                boottype=grub
2168            elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2169                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2170                bootconf="$efidir/grub.conf"
2171                boottype=grub2
2172            else
2173                # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2174                FindSyslinux64EFI
2175                bootbin=$SYSLINUX64EFI
2176                bootconf="$efidir/syslinux.cfg"
2177            fi
2178        else
2179            # EFI
2180            efidir=$bootdir
2181            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2182            boottype=elilo
2183            bootconf="$efidir/elilo.conf"
2184        fi
2185        LogAll "Found $boottype boot type"
2186
2187        # Copy it so that CD-ROM menu entry is satisfied
2188        mountefi=0
2189        df -T | grep /boot/efi | grep -qE 'vfat'
2190        if [ $? -ne 0 ]; then
2191            mount /boot/efi
2192            if [ $? -ne 0 ]; then
2193                echo "You have to mount your (U)EFI partition when using mindi"
2194                MindiExit -1
2195            fi
2196            mountefi=1
2197        fi
2198        mkdir -p $efidir
2199        cp $bootbin $efidir
2200        if [ $mountefi -eq 1 ]; then
2201            umount /boot/efi 2>&1 > /dev/null
2202        fi
2203
2204        if [ $boottype = "syslinux" ]; then
2205            FindLdlinuxe64Binary
2206            if [ -e "$LDLINUXE64" ]; then
2207                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2208                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2209            fi
2210        fi
2211    else   
2212        # Useful for syslinux 5.x
2213        FindLdlinux32Binary
2214        if [ -e "$LDLINUXC32" ]; then
2215            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2216            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir). Did you run out of disk space?"
2217        fi
2218    fi
2219
2220    MakeBootConfFile $boottype > $bootconf
2221
2222    echo -en "Tarring and zipping the data content..."
2223    size_of_all_tools=`du -sk $bigdir | cut -f1`
2224    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2225    LogFile "Size of the data content"
2226    LogFile "------------------------"
2227    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2228    LogFile "------------------------"
2229    echo -e "$DONE"
2230
2231    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2232    rm -rf $bigdir
2233    rm -f $needlist
2234}
2235
2236
2237Prompt() {
2238    echo -en "$1"
2239    read line
2240}
2241
2242
2243ReadLine() {
2244    local i incoming
2245    read incoming
2246    i=0
2247    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2248        i=$(($i+1))
2249        read incoming
2250    done
2251    echo "$incoming"
2252}
2253
2254
2255SizeOfPartition() {
2256    local devpath drive res stub
2257    device=$1
2258    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2259        Die "Cannot find $device's size - is your /etc/fstab sane?"
2260    fi
2261    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2262        res=`SizeOfRaidPartition $device`
2263        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2264        echo "$res"
2265        return 0
2266    fi
2267    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2268    res=`$FDISK -s $device 2>> $LOGFILE`
2269    # end patch
2270    # take only the first in case of multiple mount (cifs, nfs, ...)
2271    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2272    [ "$res" = "" ] && res="-1"
2273    echo $res
2274    return 0
2275}
2276
2277
2278SizeOfRaidPartition() {
2279    local real_dev smallest_size silly tmp
2280
2281    silly=999999999
2282    smallest_size=$silly
2283
2284    for real_dev in `GetRaidDevMembers $1` ; do
2285        tmp=`SizeOfPartition $real_dev`
2286        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2287    done
2288
2289    if [ "$smallest_size" = "$silly" ] ; then
2290        echo "-1"
2291        return 1
2292    else
2293        echo "$smallest_size"
2294        return 0
2295    fi
2296}
2297
2298
2299StripExecutable()
2300{
2301    local tmpfile
2302
2303    tmpfile=$MINDI_TMP/stripped.$$.dat
2304    [ -d "$1" ] || [ -h "$1" ] && return
2305    cp -f $1 $tmpfile 2>> $LOGFILE
2306    strip $tmpfile 2> /dev/null
2307    if [ "$?" -eq "0" ] ; then
2308        cp -f $tmpfile $1 2>> $LOGFILE
2309        LogFile "INFO: Stripped binary $2"
2310    fi
2311    rm -f $tmpfile
2312}
2313
2314KernelVer() {
2315        local fkern_ver fname
2316
2317        fname=$1
2318        file $fname | grep -q gzip
2319        if [ "$?" -eq "0" ] ; then
2320            # Used by ia64
2321            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2322        else
2323            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2324        fi
2325        echo "$fkern_ver"
2326}
2327
2328
2329# WARNING: This function should just echo the final result !!!
2330#
2331TryToFindKernelPath() {
2332    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2333
2334    we_want_version=$KERVERRUN
2335    possible_kernels=""
2336    duff_kernels=""
2337    output=""
2338
2339    if [ "$ARCH" = "ia64" ] ; then
2340       root="/boot/efi/efi"
2341    else
2342       root="/"
2343    fi
2344    # See if we're booted from a Xen kernel
2345    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2346    if [ -f /proc/xen/capabilities ]; then
2347        # It's a Xen kernel
2348        KERNEL_IS_XEN="yes"
2349        LogFile "INFO: It's a Xen kernel..."
2350    fi
2351
2352    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2353        [ ! -e "$fname" ] && continue
2354        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2355        fkern_ver=`KernelVer $fname`
2356        [ "$fkern_ver" = "" ] && continue
2357        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2358        [ -f "$fname" ] || continue
2359        [ -h "$fname" ] && continue
2360        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2361        file $fname | grep -q gzip
2362        if [ "$?" -eq "0" ] ; then
2363            # Used by ia64
2364            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2365                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2366                duff_kernels="$fname $duff_kernels"
2367            else
2368                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2369                possible_kernels="$fname $possible_kernels"
2370            fi
2371        else
2372            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2373                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2374                duff_kernels="$fname $duff_kernels"
2375            else
2376                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2377                possible_kernels="$fname $possible_kernels"
2378            fi
2379        fi
2380    done
2381    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2382        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2383    fi
2384    if [ ! "$possible_kernels" ] ; then
2385        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2386        possible_kernels="$duff_kernels"
2387        if [ ! "$possible_kernels" ] ; then
2388            LogAll "INFO: Sorry, no duff kernels either"
2389        else
2390            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2391            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2392        fi
2393    fi
2394    if [ $KERNEL_IS_XEN = "yes" ]; then
2395        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2396        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2397    fi
2398    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2399    noof_kernels=`CountItemsIn "$possible_kernels"`
2400    if [ "$noof_kernels" -eq "0" ] ; then
2401        LogAll "Could not find your kernel."
2402        if [ -e "/boot/vmlinuz" ] ; then
2403            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2404            output=/boot/vmlinuz
2405        else
2406            output=""
2407        fi
2408    elif [ "$noof_kernels" -eq "1" ] ; then
2409        kp=`echo "$possible_kernels" | sed s/' '//`
2410        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2411        output="$kp"
2412    else
2413        for i in $possible_kernels ; do
2414            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2415                LogAll "INFO: OK, I used my initiative and found that "
2416                LogAll "INFO: $i is probably your kernel. "
2417                output="$i"
2418                break
2419            fi
2420        done
2421        if [ ! -n "$output" ]; then
2422            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2423                output=/boot/vmlinuz
2424                LogFile "INFO: Schlomo, this one's for you."
2425            else
2426                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2427                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2428                LogFile "INFO: $possible_kernels"
2429                output=""
2430            fi
2431        fi
2432    fi
2433    if [ $KERNEL_IS_XEN = "yes" ]; then
2434        if [ "$noof_xenkernels" -eq "0" ]; then
2435            xenkernelpath=""
2436        elif [ "$noof_xenkernels" -eq "1" ]; then
2437            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2438            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2439        else
2440            for i in $possible_xenkernels ; do
2441                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2442                    LogFile "INFO: OK, I used my initiative and found that "
2443                    LogFile "INFO: $i is probably your Xen kernel. "
2444                    xenkernelpath="$i"
2445                    break
2446                fi
2447            done
2448            if [ ! -n "$xenkernelpath" ]; then
2449                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2450                if [ ! -n "$new_possible_xenkernels" ]; then
2451                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2452                    LogFile "INFO: Using $xenkernelpath"
2453                else
2454                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2455                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2456                    LogFile "INFO: $possible_xenkernels"
2457                    output=""
2458                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2459                    LogFile "INFO: Using $xenkernelpath"
2460                fi
2461            fi
2462        fi
2463        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2464            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2465        fi
2466    fi
2467    #LogAll "TryToFindKernelPath found $output"
2468    echo "$output"
2469}
2470
2471
2472TurnTgzIntoRdz() {
2473    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink templog
2474
2475    tgz_dir_fname=$1
2476    rdz_fname=$2
2477    kernelsize=$3
2478    maxsize=$(($BOOT_SIZE-$kernelsize))
2479    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2480    tempfile=$MINDI_TMP/temp.rd
2481    res=0 
2482    templog=$MINDI_TMP/$$.log
2483    > $templog
2484
2485    echo -en "..."
2486    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2487    echo -en "..."
2488    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2489    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2490    echo -en "..."
2491    mkdir -p $mountpoint
2492    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2493    echo -en "..."
2494    old_pwd=`pwd`
2495    cd "$mountpoint"
2496
2497    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2498    for d in bin sbin lib lib64; do
2499        if [ -h "/$d" ]; then
2500            thelink=`readlink /$d`
2501            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2502            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2503            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2504                rmdir $mountpoint/$d
2505            fi
2506            if [ ! -h $mountpoint/$d ]; then
2507                rm -f $mountpoint/$d 2> /dev/null
2508                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2509            fi
2510        fi
2511    done
2512
2513    LogFile "INFO: what is now in $mountpoint"
2514    ls -alR $mountpoint >> $LOGFILE
2515   
2516    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2517    # copy from rootfs into mountpoint
2518    for f in $tgz_dir_fname/*; do 
2519        if [ ! -r $f ]; then
2520            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2521        else
2522            cp -af $f . 2>&1 >> $LOGFILE
2523        fi
2524    done
2525    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2526    ln -sf usr/sbin/init linuxrc
2527
2528    cd dev || Die "Can't cd to dev"
2529    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2530    rm -f dev-entries.tgz
2531    cd ..
2532
2533    for w in insmod.static insmod.static.old ; do
2534        s=`which $w 2> /dev/null`
2535        if [ -e "$s" ] ; then
2536            tar cf - -C / $s 2> /dev/null | tar xf -
2537        fi
2538    done
2539
2540    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2541   
2542    # Copy of files mandatory for ssh to automate mount if sshfs is used
2543    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2544    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2545    cat > $mountpoint/tmp/myssh << EOF
2546ssh -o StrictHostKeyChecking=no $*
2547EOF
2548    chmod 755 $mountpoint/tmp/myssh
2549
2550    # Copy of files mandatory for ld.so
2551    cp -a /etc/ld.so.c* $mountpoint/etc
2552
2553    # Handle the case where busybox and mount are dynamically linked
2554    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2555    if [ $? -eq 0 ]; then
2556        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2557        rm -f bin/mount
2558    fi
2559
2560    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2561    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2562    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2563        if [ -d $f ]; then
2564            for g in `find $f`; do 
2565                echo $g >> $MINDI_TMP/minimal.lis
2566                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2567            done
2568        else 
2569            if [ -r $f ]; then
2570                echo $f >> $MINDI_TMP/minimal.lis
2571                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2572            fi
2573        fi
2574    done
2575    LogAll "Processing all dependencies of required files..."
2576    for f in `sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`; do
2577        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2578    done
2579    # Initial / are trucated by tar
2580    finallist=""
2581    # Remove directories from the list, as tar/cp will create them anyway
2582    # and it may hurt if /lib is in it as on Debian/Ubuntu
2583    # recent bash says that -d is true for a link to a dir !
2584    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2585        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2586            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2587            if [ ! -e "$mountpoint/$f" ]; then
2588                finallist="$finallist $f"
2589            fi
2590        fi
2591    done
2592    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2593
2594    fnllist=`echo $finallist | sort -u`
2595    #tar cf - $finallist 2> $templog | tar xf - || LogIt "WARNING: Problem in minimal analysis" $templog
2596    echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $templog
2597    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog
2598
2599    # In case target /bin dir still doesn't exist, create it before using it
2600    if [ ! -d $mountpoint/bin ]; then
2601        mkdir -p $mountpoint/bin
2602    fi
2603
2604    # For older distributions expecting /sbin/init provides it
2605    if [ ! -e "sbin/init" ]; then
2606        (cd sbin ; ln -sf ../usr/sbin/init .)
2607    fi
2608
2609    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2610    ln -sf /bin/bash bin/sh
2611    LogFile "INFO: Using bash as default shell"
2612
2613    # Avoids an issue on some distro (RHEL5)
2614    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2615
2616    mkdir -p $mountpoint/tmp
2617    # Management of udev (which includes modprobe in rules)
2618    ps auxww | grep -v grep | grep -qw udevd
2619    if [ $? -eq 0 ]; then
2620        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2621        LogFile "INFO: udev device manager found"
2622        tar cf - -C / /etc/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $templog
2623        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2624        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2625        # Do not do it if it's a link (Ubuntu 64 bits #503)
2626        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2627            tar cf - -C / /lib64/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $templog
2628        fi
2629        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2630            tar cf - -C / /lib32/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $templog
2631        fi
2632        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2633            tar cf - -C / /lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $templog
2634        fi
2635        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2636            tar cf - -C / /usr/lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog
2637        fi
2638        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2639            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2640            lis=""
2641            # Get only the files which exist in that list
2642            # and potentially their symlink structure
2643            for i in $lis2; do
2644                if [ -h $i ]; then
2645                    j=$i
2646                    while [ -h $j ]; do
2647                        lis="$lis $j"
2648                        j=`readlink -f $j`
2649                    done
2650                    lis="$lis $j"
2651                elif [ -f $i ]; then
2652                    lis="$lis $i"
2653                fi
2654            done
2655            # And their deps
2656            LocateDeps $lis > $MINDI_TMP/udev.lis
2657            for i in $lis; do
2658                if [ "`echo $i | cut -c1`" = "/" ]; then
2659                    j=`echo $i | cut -c2-`
2660                    [ "$j" != "" ] && rm -f $j
2661                fi
2662                echo "$i" >> $MINDI_TMP/udev.lis
2663            done
2664            finallist=""
2665            # Remove directories from the list, as tar/cp will create them anyway
2666            # and it may hurt if /lib is in it as on Debian/Ubuntu
2667            # recent bash says that -d is true for a link to a dir !
2668            for f in `sort -u $MINDI_TMP/udev.lis`; do
2669                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2670                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2671                    if [ ! -e "$mountpoint/$f" ]; then
2672                        finallist="$finallist $f"
2673                    fi
2674                fi
2675            done
2676            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $templog
2677            echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $templog
2678            cp -a --parents $finallist -t $mountpoint/ 2> $templog  || LogIt "ERROR: Problem in udev.lis analysis" $templog
2679            rm -f $MINDI_TMP/udev.lis
2680        else
2681            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2682            LogAll "         mindi will use static devices which may cause problems"
2683            rm -f $mountpoint/tmp/USE-UDEV
2684        fi
2685    fi
2686
2687    # Management of potential HW info (ProLiant only at the moment)
2688    rm -rf $MINDI_CACHE/bkphw
2689    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2690    if [ -d $MINDI_CACHE/bkphw ]; then
2691        LogIt "INFO: Hardware Information found and saved ..."
2692        cp -rp $MINDI_CACHE/bkphw .
2693        if [ -f $MINDI_CACHE/tools.files ]; then
2694            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2695            LocateDeps $lis > $MINDI_TMP/tools.lis
2696            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $templog
2697        fi
2698        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2699            mv -f $MINDI_CACHE/mindi-rsthw .
2700            chmod 755 ./mindi-rsthw
2701        fi
2702        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2703    fi
2704
2705    # Management of perl scripts delivered needed at restore time
2706    LogAll "Analyzing perl modules dependencies..."
2707    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog
2708    LogFile "DBG4: Perl Modules found:"
2709    LogFile "-------------------------"
2710    cat $MINDI_TMP/perl.lis >> $LOGFILE
2711    LogFile "-------------------------"
2712    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $templog
2713
2714    for w in cdrom groovy-stuff ; do
2715        mkdir -p mnt/$w
2716    done
2717
2718    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $templog
2719
2720    echo -en "..."
2721    cd /
2722
2723    needed_modules=""
2724    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2725
2726    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2727        # For PXE boot
2728        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2729    fi
2730    for i in $DENY_MODS; do
2731        LogFile "INFO: Removing $i from the list of modules to load"
2732        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2733    done
2734
2735    if [ "${kernelname}" != "" ]; then
2736        needed_modules_path=lib/modules/${kernelname}
2737        mkgmopt="-k ${kernelname}"
2738    else
2739        needed_modules_path=lib/modules/$KERVERRUN
2740        mkgmopt="-k $KERVERRUN"
2741    fi
2742
2743    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2744    LogAll "Analyzing kernel modules dependencies..."
2745    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2746
2747    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2748    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog
2749
2750    # Uncompress modules if not using udev and native modprobe
2751    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2752        for i in $needed_modules; do
2753            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2754                gunzip -f $mountpoint/$i
2755            fi
2756            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2757                bunzip2 -f $mountpoint/$i
2758            fi
2759            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2760                unxz -f $mountpoint/$i
2761            fi
2762            LogFile "INFO: Uncompressing $i"
2763        done
2764    fi
2765
2766    # Also copy modules.* in case of udev so that normal modprobe works
2767    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog
2768
2769    # Copy FW in case some drivers needs it
2770    for d in "/lib" "/usr/lib"; do
2771        if [ -d "$d/firmware" -a ! -h $d ]; then
2772            cp -a "$d/firmware" "$mountpoint/$d"
2773        fi
2774    done
2775
2776    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2777    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2778        if [ -d "$d/multipath" -a ! -h $d ]; then
2779            cp -a "$d/multipath" "$mountpoint/$d"
2780        fi
2781    done
2782
2783    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2784    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2785
2786    # Copy an additional ProLiant tool for OBDR support
2787    if [ -f $MINDI_TMP/OBDR ]; then
2788        found=0
2789        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2790            mkdir -p $mountpoint/usr/bin
2791            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2792            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2793            found=1
2794        fi
2795        if [ -x /usr/bin/sg_wr_mode ]; then
2796            mkdir -p $mountpoint/usr/bin
2797            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2798            LocateDeps $lis > $MINDI_TMP/obdr.lis
2799            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $templog)
2800            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2801            found=1
2802        fi
2803        if [ $found -eq 0 ]; then
2804            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2805            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2806        fi
2807    fi
2808
2809    if [ ! -e "/sbin/devfsd" ]; then
2810        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2811        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2812        rm -f $mountpoint/sbin/devfsd
2813    fi
2814    cd "$old_pwd"
2815    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2816    if [ _"$MONDO_SHARE" != _"" ]; then
2817        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2818        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2819        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2820        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2821        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2822    fi
2823
2824    # Create module list to load at restore time
2825    rm -f $mountpoint/tmp/modules
2826    for m in $CDROM_MODS; do
2827        echo $m >> $mountpoint/tmp/modules
2828    done
2829
2830    # copy boot stuff now generated in PrepareDataDiskImage
2831    if [ "$BOOT_TYPE" = "UEFI" ]; then
2832        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
2833    else
2834        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
2835    fi
2836
2837    mkdir -p $mountpoint/proc
2838    LogFile "---------------------------"
2839    LogFile "Size of initial ramdisk:"
2840    LogFile "---------------------------"
2841    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2842    LogFile "---------------------------"
2843    LogFile "Content of initial ramdisk:"
2844    LogFile "---------------------------"
2845    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2846    LogFile "---------------------------"
2847
2848    # Determine what filesystem to use for initrd image
2849    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2850    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2851    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2852    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2853        # say what will be used
2854        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2855        # kernel expects linuxrc in ext2 filesystem
2856        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2857        # unmount loop filesystem and create image file using the standard approach
2858        umount $mountpoint || Die "Cannot unmount $tempfile"
2859        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2860        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2861            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2862        else
2863            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2864        fi
2865        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2866        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2867        rm -f ${rdz_fname}.tmp
2868        # log that we are done
2869        LogFile "      ...done."
2870    elif [ "$gvFileSystem" = "initramfs" ]; then
2871        # say what will be used
2872        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2873        # make sure that cpio is there
2874        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2875        # go into filesystem
2876        cd "$mountpoint"
2877        # kernel expects init in cpio filesystem
2878        ln -sf usr/sbin/init init
2879        # create cpio image file and unmount loop filesystem
2880        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2881        cd "$old_pwd"
2882        umount $mountpoint || Die "Cannot unmount $tempfile"
2883        # log that we are done
2884        LogFile "      ...done."
2885    else
2886        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2887    fi
2888
2889    if [ "$res" -eq "0" ] ; then
2890        echo -en "..."
2891    else
2892        echo -en "\rMade an rdz WITH ERRORS.           \n"
2893    fi
2894    return 0
2895}
2896
2897
2898##############################################################################
2899#----------------------------------- Main -----------------------------------#
2900##############################################################################
2901
2902# Now we can create what we need
2903mkdir -p $MINDI_TMP
2904
2905# --nolog needs to be first, and is used in analyze-my-lvm
2906if [ "$1" = "--nolog" ] ; then
2907    shift
2908    LOGFILE=/dev/stderr
2909else
2910    > $LOGFILE
2911fi
2912if [ "$1" = "--printvar" ] ; then
2913    shift
2914    if [ _"$1" != _"" ] ; then
2915        set | grep -Ew "^$1" | cut -d= -f2
2916    fi
2917    exit 0
2918fi
2919
2920LogFile "mindi v$MINDI_VERSION"
2921LogFile "$ARCH architecture detected"
2922LogFile "mindi called with the following arguments:"
2923echo "$@">> $LOGFILE
2924LogFile "Start date : `date`"
2925LogFile "-----------------------------"
2926
2927[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2928
2929# Log some capital variables
2930[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2931[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2932LogFile "MONDO_SHARE = $MONDO_SHARE"
2933LogFile "MINDI_LIB = $MINDI_LIB"
2934LogFile "MINDI_SBIN = $MINDI_SBIN"
2935LogFile "MINDI_CONF = $MINDI_CONF"
2936# Purge from potential old run
2937if [ _"$MINDI_CACHE" = _"" ]; then
2938    Die "MINDI_CACHE undefined"
2939else
2940    LogFile "MINDI_CACHE = $MINDI_CACHE"
2941fi
2942
2943if [ -f $MINDI_CONFIG ]; then
2944    LogFile "-----------------------------"
2945    LogFile " Mindi configuration file    "
2946    LogFile "-----------------------------"
2947    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2948    LogFile "-----------------------------"
2949fi
2950LogFile "In Mindi"
2951LogFile "--------"
2952LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2953LogFile "BOOT_SIZE = $BOOT_SIZE"
2954LogFile "--------"
2955
2956trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2957
2958# Sanity checks
2959which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2960which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2961which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2962which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2963if which awk &> /dev/null ; then
2964    if ! which gawk &> /dev/null ; then
2965        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2966    fi
2967fi
2968which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2969[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2970
2971[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2972
2973# Update the PATH variable if incomplete
2974if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2975    PATH=$PATH:/sbin:/usr/sbin
2976    export PATH
2977    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2978    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2979    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2980fi
2981
2982if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2983    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2984fi
2985
2986### TODO
2987### Fix as it's not mandatory on ia64
2988if [ "$ARCH" = "ia64" ] ; then
2989    if which elilo &> /dev/null ; then
2990        LILO_EXE=elilo
2991    else
2992        LILO_EXE=`which false 2> /dev/null`
2993    fi
2994else
2995    FindIsolinuxBinary
2996fi
2997trap "Aborted" SIGTERM
2998DONE="\r\t\t\t\t\t\t\t\tDone.         "
2999kernelpath=""
3000MONDO_ROOT=/var/cache/mondo
3001mkdir -p $MONDO_ROOT
3002
3003if [ -d "/proc/lvm" ]; then
3004    # LVM v1
3005    LVMCMD=""
3006    LVM="v1"
3007elif [ -d "/dev/mapper" ]; then
3008    # LVM v2
3009    LVMCMD="lvm"
3010    LVM="v2"
3011else
3012    LVM="false"
3013fi
3014
3015if [ -e "/proc/cmdline" ]; then
3016    CMDLINE="/proc/cmdline"
3017elif [ -e "/tmp/cmdline" ]; then
3018    CMDLINE="/tmp/cmdline"
3019else
3020    CMDLINE="/dev/null"
3021fi
3022
3023LogFile "INFO: LVM set to $LVM"
3024LogFile "----------"
3025LogFile "mount result:"
3026LogFile "-------------"
3027mount >> $LOGFILE
3028if [ -e "/etc/raidtab" ]; then
3029    LogFile "-------------"
3030    LogFile "/etc/raidtab content:"
3031    LogFile "-------------"
3032    cat /etc/raidtab >> $LOGFILE
3033else
3034    LogFile "No file /etc/raidtab"
3035fi
3036if [ -e "/etc/mdadm.conf" ]; then
3037    LogFile "-------------"
3038    LogFile "/etc/mdadm.conf content:"
3039    LogFile "-------------"
3040    cat /etc/mdadm.conf >> $LOGFILE
3041else
3042    LogFile "-------------"
3043    LogFile "No file /etc/mdadm.conf"
3044fi
3045LogFile "-------------"
3046LogFile "cat $CMDLINE"
3047LogFile "-------------"
3048cat $CMDLINE >> $LOGFILE
3049LogFile "-------------"
3050LogFile "cat /proc/swaps:"
3051LogFile "-------------"
3052cat /proc/swaps >> $LOGFILE
3053LogFile "-------------"
3054if [ -e "/proc/mdstat" ]; then
3055    LogFile "cat /proc/mdstat:"
3056    LogFile "-------------"
3057    cat /proc/mdstat >> $LOGFILE
3058else
3059    LogFile "No pseudo file /proc/mdstat"
3060fi
3061LogFile "-------------"
3062LogFile "cat /proc/partitions:"
3063LogFile "-------------"
3064cat /proc/partitions >> $LOGFILE
3065LogFile "-------------"
3066LogFile "cat /proc/filesystems:"
3067LogFile "-------------"
3068cat /proc/filesystems >> $LOGFILE
3069LogFile "-------------"
3070LogFile "lsmod result:"
3071LogFile "-------------"
3072lsmod >> $LOGFILE
3073MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3074if [ -x /usr/sbin/esxcfg-module ]; then
3075    LogFile "-------------"
3076    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3077    LogFile "-------------"
3078    LogFile "VMWare modules"
3079    LogFile "-------------"
3080    /usr/sbin/esxcfg-module -l >> $LOGFILE
3081    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3082fi
3083LogFile "-------------" 
3084LogFile "FORCE_MODS:"
3085LogFile "-------------"
3086LogFile "$FORCE_MODS"
3087LogFile "-------------"
3088LogFile "DENY_MODS:"
3089LogFile "-------------"
3090LogFile "$DENY_MODS"
3091LogFile "-------------"
3092LogFile "df result:"
3093LogFile "----------"
3094df -aT >> $LOGFILE
3095LogFile "-------------"
3096LogFile "df -i result:"
3097LogFile "----------"
3098df -i >> $LOGFILE
3099LogFile "-------------"
3100if [ -r /boot/grub/menu.lst ]; then
3101    LogFile "-------------"
3102    LogFile "INFO: /boot/grub/menu.lst content"
3103    LogFile "-------------"
3104    cat /boot/grub/menu.lst >> $LOGFILE
3105    LogFile "-------------"
3106fi
3107if [ -r /boot/grub/grub.conf ]; then
3108    LogFile "-------------"
3109    LogFile "INFO: /boot/grub/grub.conf content"
3110    LogFile "-------------"
3111    cat /boot/grub/grub.conf >> $LOGFILE
3112    LogFile "-------------"
3113fi
3114if [ -r /boot/grub/grub.cfg ]; then
3115    LogFile "-------------"
3116    LogFile "INFO: /boot/grub/grub.cfg content"
3117    LogFile "-------------"
3118    cat /boot/grub/grub.cfg >> $LOGFILE
3119    LogFile "-------------"
3120fi
3121if [ -r /boot/grub/device.map ]; then
3122    LogFile "-------------"
3123    LogFile "INFO: /boot/grub/device.map content"
3124    LogFile "-------------"
3125    cat /boot/grub/device.map >> $LOGFILE
3126    LogFile "-------------"
3127fi
3128if [ -r /etc/lilo.conf ]; then
3129    LogFile "-------------"
3130    LogFile "INFO: /etc/lilo.conf content"
3131    LogFile "-------------"
3132    cat /etc/lilo.conf >> $LOGFILE
3133fi
3134if [ -d /boot/efi ]; then
3135    gcf=`find /boot/efi -name 'grub.c*'`
3136    if [ _"$gcf" = _"" ]; then
3137        LogFile "Found a /boot/efi directory without a grub config file in it"
3138    else
3139        LogFile "-------------"
3140        LogFile "INFO: $gcf content"
3141        LogFile "-------------"
3142        cat $gcf >> $LOGFILE
3143        LogFile "-------------"
3144    fi
3145fi
3146
3147LogFile "Full fdisk info"
3148LogFile "---------------"
3149$FDISK -l >> $LOGFILE
3150LogFile "----------------"
3151
3152# Compute libata version
3153laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3154# If libata v2 is used then remove ide-generic as it will perturbate boot
3155if [ "`echo $MODULES | grep libata`" ]; then
3156    if [ "$laver" = "2" ]; then
3157        DENY_MODS="$DENY_MODS ide-generic"
3158        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3159        LogFile "-------------"
3160    fi
3161fi
3162
3163# Check for McAfee which disturbs the access to some files (tgz in articular)
3164if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3165    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3166    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3167    LogFile "WARNING: You have two options:"
3168    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3169    LogFile "WARNING:  - Disable the scanner during the backup"
3170fi
3171
3172# Check for ISO_CMD command
3173if [ ! -x $ISO_CMD ]; then
3174    LogFile "NOTE: No CD image (ISO file) utility found"
3175fi
3176
3177FLOPPY_WAS_MOUNTED=""
3178for mtpt in /media/floppy /mnt/floppy /floppy ; do
3179    if mount | grep -w $mtpt &> /dev/null ; then
3180        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3181        umount $mtpt
3182    fi
3183done
3184
3185#
3186# If we have a USB device we need to store info
3187# and remove it from the parameters line
3188#
3189if [ "$#" -ne "0" ] ; then
3190    if [ "$1" = "--usb" ] ; then
3191        shift
3192        USBDEVICE=$1
3193        if [ _"$USBDEVICE" = _"" ]; then
3194            Die "No USB device specified"
3195        fi
3196        shift
3197    fi
3198fi
3199
3200if [ "$#" -ne "0" ] ; then
3201    if [ "$1" = "--findkernel" ] ; then
3202        resk=`TryToFindKernelPath`
3203        # Avoids logfile content for mondo
3204        export MONDO_SHARE=""
3205        if [ "$resk" = "" ] ; then
3206            if [ $KERNEL_IS_XEN = "yes" ]; then
3207                echo "$xenkernelpath"
3208                LogFile "INFO: xenkernelpath = $xenkernelpath"
3209                MindiExit 0
3210            else
3211                MindiExit -1
3212            fi
3213        else
3214            echo "$resk"
3215            LogFile "INFO: kernelpath = $resk"
3216            MindiExit 0
3217        fi
3218    elif [ "$1" = "--locatedeps" ] ; then
3219        [ ! "$2" ] && Die "Please specify the binary to look at"
3220        LocateDeps $*
3221        # Avoids logfile content for mondo
3222        export MONDO_SHARE=""
3223        MindiExit $?
3224    elif [ "$1" = "--readalllink" ] ; then
3225        [ ! "$2" ] && Die "Please specify the binary to look at"
3226        # Avoids logfile content for mondo
3227        export MONDO_SHARE=""
3228        mr-read-all-link $2
3229        MindiExit $?
3230    elif [ "$1" = "--makemessage" ] ; then
3231        MakeMessageFile | cut -c1-80
3232        MindiExit 0
3233    elif [ "$1" = "--makemountlist" ] ; then
3234        [ ! "$2" ] && Die "Please specify the output file"
3235        MakeMountlist $2
3236        CheckMountlist $2
3237        # Avoids logfile content for mondo
3238        export MONDO_SHARE=""
3239        MindiExit $?
3240    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3241        echo "Mindi v$MINDI_VERSION"
3242        # Avoids logfile content for mondo
3243        export MONDO_SHARE=""
3244        MindiExit 0
3245    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3246        MONDO_TMP=$2
3247        # Change MINDI_TMP for the one provided by mondo
3248        # So that it can get back the built files
3249        if [ _"$MONDO_TMP" = _"" ]; then
3250            Die "MONDO_TMP is empty, aborting"
3251        fi
3252        if [ _"$MONDO_TMP" = _"/" ]; then
3253            Die "MONDO_TMP is /, aborting"
3254        fi
3255        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3256        rmdir $MINDI_TMP
3257        export MINDI_TMP=$MONDO_TMP
3258        mkdir -p $MINDI_TMP
3259
3260        # This is the scratch dir in mondo - subdir images
3261        MINDI_CACHE=$3
3262        LogFile "MINDI_CACHE = $MINDI_CACHE"
3263
3264        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3265        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3266       
3267###
3268### Sq-Modification...
3269### Attempt to locate kernel specific module path
3270### if module path is found then use it other wise use uname -r to set it...
3271###
3272        if [ $KERNEL_IS_XEN = "yes" ]; then
3273            LogAll "INFO: xenkernelpath = $xenkernelpath"
3274        fi
3275        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3276        if [ ! -d "/lib/modules/$kernelname" ]; then
3277           LogAll "WARNING: Module path for ${kernelpath} not found..."
3278           LogAll "         using running kernel\'s modules."
3279           kernelname=$KERVERRUN
3280        else
3281           LogAll "INFO: Using modules for kernel: ${kernelname}"
3282        fi
3283        LogAll "INFO: kernelname = $kernelname"
3284        LogAll "INFO: kernelpath = $kernelpath"
3285###
3286### end of Sq-Modification
3287###
3288        TAPEDEV=$5
3289        TAPESIZE=$6
3290        FILES_IN_FILELIST=$7
3291        USE_LZO=$8
3292        CDRECOVERY=$9
3293        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3294            IMAGE_DEVS=""
3295        else
3296            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3297        fi
3298        if [ "${11}" ] ; then
3299            LILO_OPTIONS=""
3300    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3301        fi
3302        LAST_FILELIST_NUMBER=${12}
3303        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3304        export MINDI_EXCLUDE_DEVS="${14}"
3305        USE_COMP="${15}"
3306        USE_LILO="${16}"
3307        USE_STAR="${17}"
3308        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3309        DIFFERENTIAL="${19}"
3310        USE_GZIP="${20}"
3311        USE_LZMA="${21}"
3312        NOT_BOOT="${22}"
3313        BOOT_TYPE="${23}"
3314        [ "$USE_COMP" = "" ] && USE_COMP=yes
3315        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3316        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3317        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3318        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3319        # MONDO_ROOT is the real scratchdir
3320        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3321        if [ _"$MONDO_ROOT" != _"" ]; then
3322            mkdir -p $MONDO_ROOT
3323        else
3324            Die "MONDO_ROOT is undefined"
3325        fi
3326    else
3327        LogScreen "Syntax: mindi (--custom ....)"
3328        MindiExit -1
3329    fi
3330fi
3331
3332if [ _"$MINDI_CACHE" != _"" ]; then
3333    rm -rf $MINDI_CACHE/* 2> /dev/null
3334    mkdir -p $MINDI_CACHE
3335fi
3336
3337[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3338
3339if [ _"$MONDO_SHARE" = _"" ]; then
3340    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3341    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3342    LogIt "BusyBox sources are available from http://www.busybox.net"
3343    LogIt "------------------------------------------------------------------------------"
3344else
3345    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3346fi
3347if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3348    LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3349else
3350    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3351    MindiExit -1
3352fi
3353
3354for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3355    modinfo $i 2> /dev/null 1> /dev/null
3356    if [ $? -eq 0 ]; then
3357        modprobe $i 2>&1 > /dev/null
3358    fi
3359done
3360
3361LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3362LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3363LogFile "NOT_BOOT = '$NOT_BOOT'"
3364if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3365    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3366    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3367    MakeMountlist $MINDI_TMP/mountlist.txt
3368    CheckMountlist $MINDI_TMP/mountlist.txt
3369    mkdir -p $MINDI_TMP/small-all/tmp
3370    cd "$MINDI_TMP/small-all"
3371    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3372    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3373    sleep 2
3374    LogIt "Done. Exiting."
3375    MindiExit 0
3376fi
3377
3378if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3379    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3380fi
3381
3382if [ "$kernelpath" = "" ] ; then
3383    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3384    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3385    read ch
3386    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3387        USE_OWN_KERNEL="yes"
3388    else
3389        USE_OWN_KERNEL="no"
3390    fi
3391    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3392        kernelpath=`TryToFindKernelPath`
3393        if [ "$kernelpath" = "" ] ; then
3394            echo -n "Please enter kernel path : "
3395            read kernelpath
3396        fi
3397    fi
3398fi
3399
3400echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3401[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3402
3403mountpoint=$MINDI_TMP/mountpoint.$$
3404PrepareDataDiskImages
3405
3406export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3407
3408LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3409PrepareBootDiskImage $kernelpath || Die "Failed to create boot disk image."
3410
3411[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3412...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3413
3414if [ _"$MONDO_SHARE" = _"" ]; then
3415    ListImagesForUser
3416    OfferToMakeBootableISO
3417    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3418        OfferToMakeBootableUSB
3419    fi
3420    LogAll "Finished."
3421elif [ "$TAPEDEV" ] ; then
3422    if [ "$ARCH" != "ia64" ] ; then
3423        # We need to keep the img file as boot file for ia64 platform
3424        rm -f $MINDI_CACHE/{*img,*iso}
3425    else
3426        rm -f $MINDI_CACHE/*iso
3427    fi
3428    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3429        OfferToMakeBootableUSB
3430    fi
3431    OfferToMakeBootableISO
3432    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3433        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3434    else
3435        Die "Cannot find all.tar.gz, to be written to tape"
3436    fi
3437elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3438    OfferToMakeBootableUSB
3439else
3440    OfferToMakeBootableISO
3441fi
3442
3443if [ -f $MINDI_TMP/$MRCFG ]; then
3444    LogFile "INFO: Your $MRCFG file is:"
3445    LogFile "--------------------------"
3446    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3447    LogFile "--------------------------"
3448else
3449    if [ _"$MONDO_SHARE" != _"" ] ; then
3450        LogIt "ERROR: You don't have a $MRCFG file !"
3451    fi
3452fi
3453# cleanup
3454LogAll "INFO: $FRIENDLY_OUTSTRING"
3455for mtpt in $FLOPPY_WAS_MOUNTED ; do
3456    mount $mtpt
3457done
3458MindiExit 0
Note: See TracBrowser for help on using the repository browser.