source: branches/3.2/mindi/mindi @ 3499

Last change on this file since 3499 was 3499, checked in by bruno, 3 years ago
  • Creates TMPDIR if it doesn't exist for mindi and analyze-my-lvm
  • Use syslinux dir systematically for boot env whatever the boot loader of this family as it works for all.
  • Improve seed for deps computation in mindi by global sorting
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 122.5 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3499 2016-02-09 01:41:11Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=${TMPDIR:=/tmp}
42if [ ! -d $TMPDIR ]; then
43    mkdir -p $TMPDIR
44fi
45
46EXTRA_SPACE=120000      # increase if you run out of ramdisk space
47BOOT_SIZE=86000         # size of the boot disk in KB
48
49PROMPT_MAKE_CD_IMAGE="yes"
50    # Ask if you want to make a CD Image to be written?
51    # if this is set to 'no', then the image will be created automatically
52
53PROMPT_MAKE_USB_IMAGE="yes"
54    # Ask if you want to make a USB Image to be written?
55    # if this is set to 'no', then the image will be created automatically
56
57USE_OWN_KERNEL="yes"
58    # If set to "no", you will be prompted for whether or not
59    # you want to use your own kernel, or the supplied default.
60    # If "yes" mindi will automatically use your own kernel.
61
62KERNEL_IS_XEN="no"
63    # If set to "no", the kernel is not a Xen kernel
64    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
65xenkernelpath=""
66 
67MY_FSTAB=/etc/fstab
68TAPE_MODS="ht st osst ide-tape ide_tape"
69SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
70
71# ide-probe-mod
72IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
73PCMCIA_MODS="pcmcia_core ds yenta_socket"
74USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
75NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
76CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
77# Replace with that line for HP OCMP e.g.
78#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
79DENY_MODS="kqemu vxfen"
80# Force some modules to be included
81FORCE_MODS=""
82
83LOGFILE=/var/log/mindi.log
84BOOT_MEDIA_MESSAGE="\
85To format and restore all files automatically, type '0enuke07' <enter>.\n\
86To restore some/all files interactively, type '0einteractive07' <enter>.\n\
87To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
88To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
89\n\
90You may add one or more parameters as well as per the function keys below\n\
91e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
92\n\
93If restoring from a local external disk or USB key, do not connect it \n\
94until the boot-up has finished.\n\
95\n\
96\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
97"
98FDISK=$MINDI_SBIN/mr-parted2fdisk
99
100# Using a config file allow to overwrite some values
101MINDI_CONFIG="$MINDI_CONF/mindi.conf"
102if [ -f $MINDI_CONFIG ]; then
103    . $MINDI_CONFIG
104fi
105DEPLIST_FILE="$MINDI_CONF/deplist.txt"
106DEPLIST_DIR="$MINDI_CONF/deplist.d"
107
108ISO_CMD="/usr/bin/mkisofs"
109ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
110
111# Mindi set this as default in case it's invoked alone
112BOOT_TYPE="BIOS"
113# and we also check whether we're UEFI or not.
114if [ -d "/sys/firmware/efi" ]; then
115    BOOT_TYPE="UEFI"
116    ISO_OPT="$ISO_OPT -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
117else
118    # Find MBR in case of bootable USB device to build
119    MBRFILE=/usr/lib/syslinux/mbr.bin
120    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
121    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
122    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
123    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
124fi
125
126# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
127# However, they use exactly the same command line parameters, so just
128# use genisoimage if it's available.
129if [ ! -x $ISO_CMD ]; then
130    ISO_CMD=/usr/bin/genisoimage
131fi
132
133
134# Function to log on screen only
135LogScreen() {
136        if [ -e /dev/stderr ] ; then
137        echo -e "$1" >> /dev/stderr
138    elif [ -e /usr/bin/logger ] ; then
139        /usr/bin/logger -s $1
140    fi
141}
142
143# Function to log in log file only
144LogFile() {
145
146    echo -e "$1" >> $LOGFILE
147    if [ _"$2" != _"" ]; then
148        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
149        rm -f "$2"
150    fi
151}
152
153# Function to log in both screen and logfile
154LogAll() {
155    LogScreen "$1"
156    LogFile "$1" "$2"
157}
158
159# Preserved for compatibility
160LogIt() {
161    LogAll "$1" "$2"
162}
163
164# Last function called before exiting
165# Parameter is exit code value
166# Should be declared here as used immediately below potentialy
167MindiExit() {
168    LogFile "Mindi $MINDI_VERSION is exiting" 
169    LogFile "End date : `date`" 
170    if [ _"$MONDO_SHARE" != _"" ] ; then
171        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
172        if [ -f $LOGFILE ]; then
173            cat $LOGFILE >> /var/log/mondoarchive.log
174        else
175            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
176        fi
177        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
178    fi
179
180    cd /
181    sync&
182
183    # Clean temporary files only when standalone mindi
184    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
185        rm -Rf $MINDI_TMP
186    fi
187    exit $1
188}
189
190Die() {
191    local i
192    if [ "$1" = "" ] ; then
193        LogAll "FATAL ERROR"
194    else
195        LogAll "FATAL ERROR. $1"
196    fi
197    if [ _"$2" != _"" ]; then
198        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
199    fi
200    rm -f "$2"
201
202    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
203    LogAll "See http://www.mondorescue.org for more information."
204    LogAll "WE CANNOT HELP unless you enclose that file.\n"
205    MindiExit -1
206}
207
208# Now we can create what we need
209MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
210if [ $? -ne 0 ]; then
211    df $TMPDIR
212    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
213fi
214if [ _"$MINDI_TMP" = _"" ]; then
215    Die "MINDI_TMP is empty, aborting"
216fi
217if [ _"$MINDI_TMP" = _"/" ]; then
218    Die "MINDI_TMP is /, aborting"
219fi
220export MINDI_TMP
221
222# ----------------------------------------------------------------------------
223
224
225AbortHere() {
226    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
227    Die "Program is terminating in response to signal received from OS/user"
228}
229
230
231Aborted() {
232    trap SIGHUP SIGTERM SIGTRAP SIGINT
233    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
234    Die "User abort."
235}
236
237
238AddFileToCfgIfExists() {
239    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
240}
241
242
243AddKeyboardMappingFile() {
244    local mappath r included_list included_item i res ii sss
245    mappath=$1
246    KBDEPTH=$(($KBDEPTH+1))
247    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
248    if [ -e "$bigdir/$mappath" ] ; then
249        LogFile "INFO: $mappath already added"
250        return
251    elif [ -d "$bigdir/$mappath" ] ; then
252        echo "Cannot add $mappath: it's a directory. Sorry."
253        return
254    fi
255    LogFile "INFO: Added kbd map $mappath"
256    if [ ! -e "$mappath" ] ; then
257        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
258        if [ ! -e "$mappath" ] ; then
259            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
260            return
261        fi
262    else
263        echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
264    fi
265
266    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
267    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
268        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
269    else
270        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
271    fi
272    for included_item in $included_list ; do
273        if [ ! -e "$included_item" ] ; then
274            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
275            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
276            for ii in $sss ; do
277                [ -e "$ii" ] && AddKeyboardMappingFile $ii
278            done
279        else
280            AddKeyboardMappingFile $included_item
281        fi
282    done
283}
284
285
286CopyDependenciesToDirectory() {
287    local outdir incoming counter d found tdir templog
288    outdir=$1
289    templog=$MINDI_TMP/$$.log
290    mkdir -p $outdir
291    incoming=`ReadLine`
292    counter=0
293    > $templog
294
295    while [ "$incoming" != "" ] ; do
296        # Non absolute file names should not arrive till here => skipped
297        if [ `echo "$incoming" | cut -c1` != '/' ]; then
298            LogAll "WARNING: Unable to handle $incoming"
299            incoming=`ReadLine`
300            continue
301        fi
302        # no parent directory of incoming should be a link, copy is not possible in that case
303        d=`dirname "$incoming"`
304        found="false"
305        while [ $d != "/" -a $found = "false" ]; do
306            [ -h "$d" ] && found="true"
307            d=`dirname "$d"`
308        done
309        if [ -d "$incoming" -a ! -h "$incoming" ]; then
310            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
311        elif [ -e "$incoming" ] && [ $found = "false" ]; then
312            if [ ! -h "$incoming" ]; then
313                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
314            else
315                tdir=`dirname "$incoming"`
316                if [ ! -e "$outdir/$tdir" ]; then
317                    mkdir -p "$outdir/$tdir"
318                fi
319                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
320            fi
321            # Only uncompress modules if not using udevd
322            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
323                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
324            fi
325            [ -x "$outdir" ] && StripExecutable $outdir
326            counter=$(($counter+1))
327            LogProgress $counter $2
328        fi
329        incoming=`ReadLine`
330    done
331}
332
333
334CountItemsIn() {
335    local r
336    r=0
337    for q in $1 ; do
338        r=$(($r+1))
339    done
340    echo $r
341}
342
343
344DropOptimizedLibraries() {
345    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
346    filelist=$1
347    outdir=$2
348
349    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
350    if [ "$list_of_optimized_libraries" = "" ] ; then
351        return 0
352    fi
353    echo -en "Dropping i686-optimized libraries if appropriate"
354    for optimized_lib_name in $list_of_optimized_libraries ; do
355        echo -en "."
356        reason=""
357        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
358        echo "$vanilla_lib_name" >> $filelist
359        LogFile "INFO: Adding $vanilla_lib_name to filelist"
360        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
361        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
362
363        # This may return multiple files
364        for resolved in `mr-read-all-link $vanilla_lib_name`; do
365            LogFile "INFO: Adding as deps $resolved to filelist"
366            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
367            if [ "$vanilla_resolved_name" != "$resolved" ]; then
368                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
369                rmdir $outdir$resolved > /dev/null 2> /dev/null
370                ln -sf $vanilla_resolved_name $outdir$resolved
371                LogFile "INFO: Excluding deps $resolved" 
372                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
373                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
374                echo "$vanilla_resolved_name" >> $filelist.tmp
375                mv -f $filelist.tmp $filelist
376            fi
377        done
378    done
379    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
380    mv -f $filelist.tmp $filelist
381    echo -e "$DONE"
382}
383
384
385FindAndAddUserKeyboardMappingFile() {
386    local r res mapfile mappath included_item included_list keyfile mp locale
387    LogAll "INFO: Analyzing your keyboard's configuration."
388    KEYDIR=/usr/lib/kbd
389    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
390    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
391    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
392    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
393    if [ ! -e "$KEYDIR" ] ; then
394        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
395        return 0
396    fi
397    if [ -e "/etc/sysconfig/keyboard" ] ; then
398        LogFile "INFO: Red Hat-style config detected."
399        keyfile=/etc/sysconfig/keyboard
400    elif [ -e "/etc/vconsole.conf" ] ; then
401        LogFile "INFO: New Fedora style config detected."
402        keyfile=/etc/vconsole.conf
403    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
404        LogFile "INFO: Slackware-style config detected."
405        keyfile=/etc/rc.d/rc.keymap
406    elif [ -e "/etc/rc.config" ] ; then
407        LogFile "INFO: Debian-style config detected."
408        keyfile=/etc/rc.config
409    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
410        LogFile "INFO: Debian-style config detected."
411        mkdir -p $bigdir/tmp
412        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
413        KBDEPTH=0
414        mkdir -p $bigdir/etc/console
415        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
416        echo ""
417        echo -e "$DONE"
418        return 0
419    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
420        LogFile "INFO: Ubuntu-style config detected."
421        mkdir -p $bigdir/tmp
422        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
423            kbdfile="/etc/console-setup/boottime.kmap.gz"
424        else
425            kbdfile="/etc/console-setup/cached.kmap.gz"
426        fi
427        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
428        KBDEPTH=0
429        mkdir -p $bigdir/etc/console-setup
430        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
431        echo ""
432        echo -e "$DONE"
433        return 0
434    elif [ -e "/etc/rc.conf" ] ; then
435        LogFile "INFO: ArchLinux config detected."
436        keyfile=/etc/rc.conf
437    elif [ -e "/etc/conf.d/keymaps" ] ; then
438        LogFile "INFO: Gentoo-style config detected."
439        keyfile=/etc/conf.d/keymaps
440    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
441        LogFile "INFO: X11-style config detected."
442        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
443    else
444        LogFile "Searching for rc.config ..."
445        keyfile=`find /etc -name rc.config | head -n1`
446        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
447            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
448            return
449        else
450            LogFile "INFO: Found $keyfile"
451        fi
452    fi
453    if [ ! -e "$KEYDIR/keymaps" ] ; then
454        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
455        return
456    fi
457    LogFile "INFO: keyfile=$keyfile"
458    # For SLES we need to remove the .map.gz extension Cf #614
459    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
460    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
461    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
462    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
463    LogFile "INFO: locale=$locale"
464    #
465    # Process the keymaps dir once for all
466    # AddKeyboardMappingFile will use it recursively
467    #
468    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
469    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
470    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
471    # If we have multiple keymaps then log it !!
472    echo "$mp" | grep -q " " >> $LOGFILE
473    if [ $? -eq 0 ]; then
474        LogAll "WARNING: Multiple keymaps found: $mp"
475        LogFile "INFO: The following one will be used"
476    fi
477    for i in $mp ; do
478        mappath=$i
479        [ -e "$i" ] && [ ! -d "$i" ] && break
480    done
481    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
482        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
483    fi
484    LogFile "INFO: mappath = $mappath"
485    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
486        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
487        return
488    fi
489    LogAll "INFO: Adding the following keyboard mapping tables: "
490    mkdir -p $bigdir/tmp
491    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
492    KBDEPTH=0
493    AddKeyboardMappingFile $mappath
494    echo ""
495    echo -e "$DONE"
496    rm -f $MINDI_TMP/keymaps.find
497    return 0
498}
499
500
501FindLdlinux32Binary() {
502    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
503    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
504    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
505    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
506    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
507    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
508    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
509    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
510    if [ ! -e "$LDLINUXC32" ]; then 
511        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
512        LDLINUXC32=/tmp/idoesnthopefullyexist
513    else
514        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
515    fi
516}
517
518
519FindMboot32Binary() {
520    MBOOTC32=/usr/lib/syslinux/mboot.c32
521    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
522    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
523    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
524    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
525    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
526    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
527    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
528    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
529    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
530}
531
532FindLdlinuxe64Binary() {
533    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
534    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
535    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
536    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
537    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
538    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
539    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
540    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
541    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
542}
543
544FindSyslinux64EFI() {
545    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
546    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
547    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
548    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
549    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
550    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
551    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
552    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux.efi first. If your syslinux RPM doesn't include syslinux.efi, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
553    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
554}
555
556FindIsolinuxBinary() {
557    ISOLINUX=/usr/lib/isolinux.bin
558    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
559    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
560    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
561    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
562    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
563    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
564    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
565    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
566    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
567}
568
569
570GenerateGiantDependencyList() {
571    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
572
573    echo -en "Analyzing dependency requirements"
574    outfile=$1
575    tempfile=$MINDI_TMP/$$.txt
576    incoming=`ReadLine`
577
578    > $tempfile
579    progress=0
580    res=0
581    noof_lines=$2
582    while [ "$incoming" != "" ] ; do
583        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
584            incoming=`ReadLine`
585            continue
586        fi
587        if [ "$incoming" = "LVMFILES:" ] ; then
588            break
589        fi
590        filelist=`GenerateListForFile "$incoming"`
591        r=$?
592        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
593        res=$(($res+$r))
594#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
595        for fname in $filelist ; do
596            [ "$fname" != "" ] && echo "$fname" >> $tempfile
597        done
598        progress=$(($progress+1))
599        LogProgress $progress $noof_lines
600        incoming=`ReadLine`
601    done
602    if  [ "$incoming" = "LVMFILES:" ] ; then
603        incoming=`ReadLine`
604        lvmversion=""
605        while [ "$incoming" != "" ] ; do
606            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
607                incoming=`ReadLine`
608                continue
609            fi
610            filelist=`GenerateListForFile "$incoming"`
611            for tool in $filelist ; do
612                lvmresolved=`readlink -f $tool`
613                if [ "$tool" = "$lvmresolved" ]; then
614                    echo "$tool" >> $tempfile
615                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
616                    if [ "$lvmversion" = "" ] ; then
617                        lvmversion=`$lvmresolved`
618                        echo "$lvmresolved" >> $tempfile
619                    fi
620                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
621                    if [ "$lvmversion" = "200" ]; then
622                        # pvdata and lvmcreate_initrd don't exist in LVM2
623                        case "$toolstripped" in
624                        "pvdata")
625                            continue
626                            ;;
627                        "lvmcreate_initrd")
628                            continue
629                            ;;
630                        esac
631                    fi
632                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
633                    if [ -e "$toolpath" ] ; then
634                        echo "$toolpath" >> $tempfile
635                        echo "$tool" >> $tempfile
636                    else
637                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
638                    fi
639                    if [ -e "$toolpath" ] ; then
640                        echo "$toolpath" >> $tempfile
641                        echo "$tool" >> $tempfile
642                    else
643                        echo "Where are your LVM-Tools? Couldn't find $tool"
644                    fi
645                else
646                    echo "$tool" >> $tempfile
647                fi
648            done
649            progress=$(($progress+1))
650            LogProgress $progress $noof_lines
651            incoming=`ReadLine`
652        done
653    fi
654    echo -en "$DONE\nMaking complete dependency list"
655
656    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
657    mv -f $tempfile.new $tempfile
658    > $outfile.pre
659    progress=0
660    noof_lines=`cat $tempfile | wc -l`
661    LogFile "---------------------------------"
662    LogFile "List of dependencies:             "
663    LogFile "---------------------------------"
664    for fname in `cat $tempfile` ; do
665        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
666        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
667        progress=$(($progress+1))
668        LogProgress $progress $noof_lines
669    done
670    if [ _"$MONDO_SHARE" != _"" ]; then
671        mkdir -p $bigdir/tmp
672        mkdir -p $bigdir/usr/bin
673        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
674            LogAll "\nINFO: Incorporating post-nuke tarball"
675            old_pwd=`pwd`
676            cd "$bigdir"
677            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
678            cd "$old_pwd"
679        fi
680        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
681            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
682        else
683            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
684            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
685            LogIt "       If Mindi was called by Mondo then send a bug report."
686            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
687            LogIt "       Finally, run Mindi again."
688            Die "Odd."
689        fi
690        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
691        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
692            LogAll "\nINFO: Incorporating Network-related settings"
693            for r in NETFS-* ; do
694                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
695                LogFile "INFO: Copying $r to ramdisk"
696            done
697        fi
698    fi
699    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
700    rm -f $tempfile $outfile.pre
701    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
702    return $res
703}
704
705
706GenerateListForFile() {
707    local files_found loc fname incoming i res
708    incoming="$1"
709    files_found=""
710    res=0
711
712    for fname in $incoming ; do
713        files_found="$files_found `LocateFile $fname`"
714    done
715
716    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
717}
718
719
720# Returns all disk devices which are part of a raid array
721GetAllRaidMembers() {
722    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
723}
724
725
726GetFileSizeList() {
727    local i
728    for i in `find $1 -type d -o -print` ; do
729        du -sk $i
730    done
731}
732
733
734# Check kernel filesystem capabilites for accessing initrd image
735# Could be ext2 FS (old mode) or initramfs (new mode)
736#
737# Interface definition:
738# param #1: absolute path to kernel image
739GetInitrdFilesystemToUse() {
740
741    # interface test: make sure we have one parameter
742    if [ $# -ne 1 ]; then
743        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
744    fi
745
746    # interface parameters
747    local lvKernelImage=$1
748
749    # local constants (filesystem magic strings)
750    local lcMagicCramfs="<3>cramfs: wrong magic"
751    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
752    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
753    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
754
755    # local variables
756    local lvOffset
757    local lvScanRes
758    local lvUseFilesystem
759
760    # say where we are.
761    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
762
763    # verify that file exists
764    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
765
766    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
767    file $lvKernelImage 2>&1 | grep -q gzip
768    if [ $? -eq 0 ]; then
769        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
770        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
771    else
772        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
773        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
774        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
775        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
776        if [ $lvOffset -eq 0 ]; then
777            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
778            lvScanRes=$lcMagicInitfs
779        else
780            lvOffset=`expr $lvOffset / 2`
781            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
782            # scan again  kernel image
783            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
784        fi
785    fi
786
787    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
788    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
789        lvUseFilesystem="ext2fs"
790    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
791        lvUseFilesystem="ext3fs"
792    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
793        lvUseFilesystem="initramfs"
794    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
795        lvUseFilesystem="cramfs"
796    else
797        # In that case, we are most probably after 2.6.30 and use the supported initramfs
798        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
799        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
800        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
801        lvUseFilesystem="initramfs"
802    fi
803
804    # say what we are using
805    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
806
807    # return file system to use
808    echo "$lvUseFilesystem"
809
810}
811
812# Searches members of raid device
813# $1: raid device (/dev/md...)
814GetRaidDevMembers() {
815    if [ ! -f /etc/raidtab ]; then 
816        return
817    fi
818    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
819}
820
821
822ListAllPartitions() {
823    local res currline partition all_partitions ap_orig remaining i j
824
825    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
826    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
827    if [ -e "/vmfs/volumes" ]; then
828        # For VMWare ESX 3 get the device names of these volumes
829        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
830    fi
831    return
832}
833
834
835ListImagesForUser() {
836    local path fname
837    path=$MINDI_CACHE
838    echo -en "In the directory '$path' you will find the images:-\n"
839    for fname in `ls $path | grep -F mindi-` ; do
840        printf "%19s " $fname
841    done
842    echo " "
843}
844
845
846ListKernelModulePaths() {
847    local module_list module fname r kern
848    module_list="$MODULES"
849    # Remove unwanted modules from list
850    for i in $DENY_MODS; do
851        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
852    done
853###
854### Sq-Modification ... Use kernelname for module search path if specified
855###
856    if [ "${kernelname}" != "" ]
857    then
858        kern=${kernelname}
859    else
860        kern="$KERVERRUN"
861    fi
862    export KERVER=$kern
863###
864### Sq-Mod End
865###
866    # Get rid of duplicates
867    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
868        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
869        if [ -z "$r" ]; then
870            if [ "`echo "$MODULES" | grep -w $module`" ]; then
871                r="[live module file not found]"
872            else
873                r="[extra module file not found]"
874            fi
875        else
876            [ -f "$r" ] && echo "$r"
877        fi
878        LogFile "INFO: module $module --> $r"
879    done
880    find /lib/modules/$kern/modules.* -type f 2> /dev/null
881}
882
883#
884# Critical function which computes all dependencies (dyn. lib.)
885# for a list of binaries
886#
887LocateDeps() {
888    local incoming fname deps
889    incoming="$*"
890    deps=""
891
892    for fname in $incoming ; do
893        if [ ! -e "$fname" ] ; then
894            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
895            if echo $fname | grep lvm &> /dev/null ; then
896                LogFile "          This warning only affects you if you are using LVM."
897                if echo "$MODULES" | grep lvm &> /dev/null ; then
898                    LogFile "          I think you are, so please take heed!"
899                else
900                    LogFile "          I don't think you are, so don't worry about it."
901                fi
902            fi
903        else
904            deps="$deps $fname" 
905        fi
906    done
907    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
908}
909
910
911LocateFile() {
912    local i j path fname_to_find location output resolved tmp stub cache_id loclist
913    fname_to_find="$1"
914    # It's an absolute path
915    j=`echo "$fname_to_find" | cut -c1`
916    if [ _"$j" = _"/" ]; then
917        dn=`dirname $fname_to_find`
918        # We suppose that the link is already included, just add the new file
919        if [ -h "$dn" ]; then
920            newdn=`readlink -f $dn`
921            bn=`basename $fname_to_find`
922            output="$newdn/$bn"
923        else
924            output="$fname_to_find"
925        fi
926        if [ -h "$output" ] ; then
927            output="`mr-read-all-link $output` $output"
928        fi
929        echo "$output"
930        return 0
931    fi
932    # It's not an absolute path
933    output=""
934    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
935    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
936        [ -h "$path" ] && continue
937        [ ! -e "$path/$fname_to_find" ] && continue
938        output="$path/$fname_to_find $output"
939        if [ -h "$path/$fname_to_find" ] ; then
940            output="`mr-read-all-link $path/$fname_to_find` $output"
941        fi
942    done
943    if [ "$output" = "" ] ; then
944        return 1
945    fi
946    echo "$output"
947    return 0
948}
949
950LogProgress() {
951    local i progress modres noof_lines title
952 
953    progress=$1
954    noof_lines=$2
955    title=$3
956
957    i=$(($progress*100))
958    if [ $noof_lines -ne 0 ]; then
959        i=$(($i/$noof_lines))
960    else
961        i=0
962    fi
963
964    if [ _"$MONDO_SHARE" != _"" ]; then 
965        echo "$title        $i%"
966    else
967        echo -en "\r\t\t\t\t\t\t\t\t"
968        echo -en "$i"
969        echo -en "%"
970        modres=$(($progress%4))
971        [ "$modres" -eq "0" ] && echo -en "\t/"
972        [ "$modres" -eq "1" ] && echo -en "\t-"
973        [ "$modres" -eq "2" ] && echo -en "\t\\"
974        [ "$modres" -eq "3" ] && echo -en "\t|"
975    fi
976}
977
978# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
979MakeMondoConfigFile() {
980    local outfile use_lzo use_comp use_star
981    outfile=$1
982    > $outfile
983    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
984    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
985    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
986    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
987    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
988    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
989    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
990    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
991    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
992    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
993    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
994    echo "use-lzo $use_lzo" >> $outfile
995    echo "use-gzip $use_gzip" >> $outfile
996    echo "use-star $use_star" >> $outfile
997    echo "use-lzma $use_lzma" >> $outfile
998    echo "use-comp $use_comp" >> $outfile
999    echo "boot-type $BOOT_TYPE" >> $outfile
1000    echo "datestamp `date`" >> $outfile
1001    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1015
1016    # Deal with network configuration in a portable way
1017    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1018        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1019    fi
1020}
1021
1022# Get PV's for an LV
1023GetPVsForLV() {
1024    if [ -n "$1" ]; then
1025        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1026        if [ -z "$vg" ]; then
1027            return
1028        fi
1029        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1030    fi
1031}
1032
1033
1034MakeMountlist() {
1035    local mountlist all_partitions current_partition \
1036partition_size partition_format outstring partition_number \
1037partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1038absolute_partition old_partition_fmt current_lvolume uname skip
1039
1040    LogFile "------------------------------------"
1041    LogFile "Your raw fstab file looks like this:"
1042    LogFile "------------------------------------"
1043    cat $MY_FSTAB >> $LOGFILE
1044    LogAll "-----------------------------------"
1045    LogAll "Your mountlist will look like this:"
1046    LogAll "-----------------------------------"
1047
1048# mountlist(OUT)
1049    mountlist=$1
1050
1051# NB: partition = device
1052# NB: mountpt = where the device is mounted
1053
1054    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1055
1056    [ "$mountlist" != "" ] && rm -Rf $mountlist
1057    > $mountlist
1058    all_partitions=""
1059   
1060    if [ $LVM != "false" ]; then
1061        LogFile "INFO: Analyzing LVM..."
1062        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1063        if [ $? -ne 0 ]; then
1064            LVM="false"
1065        fi
1066        # Excluded LVs and GVs are not reported here
1067        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1068    fi
1069    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1070    for i in $IMAGE_DEVS ; do
1071        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1072    done
1073    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1074    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1075    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1076    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1077    for c_p in $all_partitions ; do
1078        # Skip fd/cd devices, network FS, cifs
1079        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1080        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1081        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1082            current_partition=`readlink -f $c_p`
1083            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1084                current_partition="$c_p"
1085            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1086                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1087                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1088            fi
1089            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1090        else
1091            current_partition="$c_p"
1092        fi
1093        [ "$c_p" = "none" ] && continue
1094        redhat_label=""
1095        label=""
1096        uuid=""
1097        absolute_partition=`readlink -f $c_p`
1098        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1099
1100        # set default in case we dont't find it
1101        str_to_find_fmt_with=$current_partition
1102
1103        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1104        # current_partition contains only first column of /etc/fstab
1105        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1106            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1107            actual_dev=""
1108
1109            # 1st try, findfs - the RHEL way of finding labels and their partitions
1110            if [ -x "/sbin/findfs" ]; then
1111                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1112            fi
1113   
1114            # 2nd try : blkid, the good way for all LABEL except swap
1115            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1116                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1117                # For LVM FS it will give a /dev/dm-# which should then be converted
1118                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1119                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1120                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1121                    for dev in `ls /dev/mapper/*`; do
1122                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1123                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1124                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1125                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1126                            break
1127                        fi
1128                    done
1129                fi
1130            fi
1131   
1132            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1133            # For LVM gives a /dev/mapper entry
1134            if [ "x$actual_dev" = "x" ]; then
1135                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1136            fi
1137   
1138            # 4th try, with vol_id
1139            # SWAP only
1140            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1141                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1142                for dev_swap in $list_swaps ; do
1143                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1144                    if [ "x$dev_exists" != "x" ]; then
1145                        actual_dev=$dev_swap
1146                        break;
1147                    fi
1148                done
1149            fi
1150
1151            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1152            # LABEL=SW-cciss/c0d0p3 (RDP)
1153            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1154            # SWAP only
1155            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1156                    skip=""
1157                    uname=$KERVERRUN
1158                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1159                    # 2.6.12 needs 16 (FC3)
1160                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1161                    # 2.6.19 and upper needs 1052
1162                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1163                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1164                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1165                    if [ $skip = "" ]; then
1166                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1167                    fi
1168                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1169                    do
1170                        # Location of the swap label for kernel 2.6
1171                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1172                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1173                            actual_dev=$try_dev
1174                        fi
1175                    done
1176            fi
1177
1178            # Check if one of all those tries has known success
1179            if [ "x$actual_dev" != "x" ]; then
1180                current_partition=$actual_dev
1181            else
1182                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1183            fi
1184        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1185        # current_partition contains only first column of /etc/fstab
1186        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1187            uuid=`echo "$current_partition" | cut -d'=' -f2`
1188            actual_dev=""
1189
1190            # 1st try, findfs - the RHEL way of finding labels and their partitions
1191            if [ -x "/sbin/findfs" ]; then
1192                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1193            fi
1194   
1195            # 2nd try : blkid, the good way for all UUID except swap
1196            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1197                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1198                # For LVM FS it will give a /dev/dm-# which should then be converted
1199                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1200                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1201                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1202                    for dev in `ls /dev/mapper/*`; do
1203                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1204                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1205                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1206                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1207                            break
1208                        fi
1209                    done
1210                fi
1211            fi
1212   
1213            # 3th try, with vol_id
1214            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1215                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1216                for dev in $list_dev ; do
1217                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1218                    if [ "x$dev_exists" != "x" ]; then
1219                        actual_dev=$dev
1220                        break;
1221                    fi
1222                done
1223            fi
1224
1225            # 4th try, with dumpuuid (VMWare only ?) for swap
1226            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1227                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1228                for dev in $list_dev ; do
1229                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1230                    if [ "x$dev_exists" != "x" ]; then
1231                        actual_dev=$dev
1232                        break;
1233                    fi
1234                done
1235            fi
1236
1237            # Check if one of all those tries has known success
1238            if [ "x$actual_dev" != "x" ]; then
1239                current_partition=$actual_dev
1240            else
1241                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1242            fi
1243        else
1244            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1245            # they use symlinks in fstab unrelated to what is shown in mount !
1246            if [ _"$partition_mountpt" = _"" ]; then
1247                # set default in case we dont't find it
1248                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1249                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1250                            str_to_find_fmt_with=$tmpp
1251                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1252                            break;
1253                        fi
1254                done
1255            fi
1256        fi
1257
1258        # Detects noauto partitions not mounted and exclude them
1259        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1260        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1261                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1262            continue
1263        fi
1264        # Detects bind partitions and exclude them
1265        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1266                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1267            continue
1268        fi
1269
1270        # Look for devices which have to be excluded
1271        skip=0
1272        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1273            l=""
1274            list_of_devices="`mr-read-all-link $current_partition`"
1275            for d in $list_of_devices; do
1276                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1277            done
1278
1279            # Remove PVs from LVs excluded
1280            l="$l `GetPVsForLV $current_partition`"
1281
1282            # We want a single unique list
1283            list_of_devices="`echo $l | sort -u`"
1284
1285            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1286                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1287                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1288                    skip=1
1289                    continue
1290                fi
1291            done
1292        fi
1293        if [ $skip -eq 1 ]; then
1294            continue
1295        fi
1296
1297        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1298        # Detects iso9660 ISO images and exclude them
1299        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1300                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1301            continue
1302        fi
1303        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1304        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1305        # the former is then a link to the latter, so we test whether
1306        # $current_partition is actually such a link or not and set
1307        # $current_lvolume accordingly. On Debian you may find more than one answer
1308        # so we remove the one corresponding to /dev/.static
1309        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1310        # principle is the same and we need to find the link to it as well.
1311        # Note that $current_lvolume may well be an
1312        # ordinary device. It is just to make sure that we feed the right value
1313        # into any of the LVM tools if possible.
1314
1315        current_lvolume="$current_partition"
1316        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1317            # .static dir are a Debian specificity
1318            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1319            echo $current_lvolume | grep -q ' '
1320            if [ $? -eq 0 ]; then
1321                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1322            fi
1323            # if it's not found, it may well be a real device such as a multipath one
1324            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1325            if [ _"$current_lvolume" = _"" ]; then
1326                current_lvolume="$current_partition"
1327            fi
1328        fi
1329        #
1330        # End of LVM device style variation code (other than $current_lvolume).
1331
1332        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1333            # Size computed via LVM not directly
1334            partition_size="lvm"
1335        else
1336            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1337            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1338            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1339                # Skip swap files
1340                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1341                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1342                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1343                [ "$partition_format" != "swap" ] && partition_format="swap"
1344                if [ "$partition_size" = "" ] ; then
1345                    totalsize=0
1346                    items=0
1347                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1348                        totalsize=$(($totalsize+$i))
1349                        items=$(($items+1))
1350                    done
1351                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1352                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1353                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1354                fi
1355            else
1356                partition_size=`SizeOfPartition $current_partition`
1357            fi
1358        fi
1359        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1360        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1361        if [ "$partition_mountpt" = "" ] ; then
1362            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1363                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1364                    partition_mountpt="raid"
1365                    partition_format="raid"
1366                else
1367                    partition_mountpt="lvm"
1368                    partition_format="lvm"
1369                fi
1370            fi
1371        fi
1372        psz=$partition_size
1373        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1374        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1375        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1376            partition_mountpt="image"
1377            old_partition_fmt=$partition_format
1378            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1379            partition_size=$(($partition_size+1)); # just in case
1380            if [ "$partition_format" = "Linux" ] ; then
1381                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1382                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1383                partition_format=$old_partition_fmt
1384            fi
1385        fi
1386
1387        if [ ! "$partition_mountpt" ] ; then
1388            LogFile "------- $FDISK -l $qq log ------------"
1389            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1390                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1391                [ "$partition_format" ] && break
1392            done
1393            LogFile "------- $FDISK log end ------------"
1394            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1395                partition_format="compaq"
1396            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1397                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1398                continue
1399            fi
1400        fi
1401        if [ "$redhat_label" ]; then
1402            label="$redhat_label"
1403        elif [ "$uuid" ]; then
1404            label="$uuid"
1405        fi
1406
1407        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1408        # in order to mount the root part e.g. in grub.
1409        # One way to solve this is to add the UUID now, if there wasn't one so it's
1410        # restored correctly
1411        if [ _"$label" = _"" ]; then
1412            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1413        fi
1414
1415        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1416        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1417        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1418        if [ "$current_partition" = "" ] ; then
1419            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1420        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1421            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1422                partition_mountpt=raid
1423                partition_format=raid
1424                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1425                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1426            else
1427                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1428            fi
1429        elif [ "$partition_format" = "" ] ; then
1430            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1431        elif [ "$partition_size" = "" ] ; then
1432            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1433        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1434            continue
1435        else
1436            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1437                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1438                partition_format="vfat"
1439            fi
1440            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1441            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1442        fi
1443    done
1444    LogAll "-----------------------------------" 
1445}
1446
1447CheckMountlist() {
1448    local file=$1
1449    # Coherency verification
1450    ML01=`cat $file | wc -l`
1451    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1452    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1453    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1454    if [ "$ML01" -ne "$ML1" ]; then
1455        LogFile "--------------------------------------------"
1456        LogAll "WARNING: Duplicate device entry in mountlist"
1457        LogFile "--------------------------------------------"
1458    fi
1459    if [ "$ML02" -ne "$ML2" ]; then
1460        LogFile "--------------------------------------------"
1461        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1462        LogFile "------------------------------------------------"
1463    fi
1464}
1465
1466OfferToMakeBootableISO() {
1467    local i old_pwd files
1468    if [ -z "$ISO_CMD" ]; then
1469        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1470        return
1471    fi
1472    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1473        echo -en "Shall I make a bootable CD image? (y/[n]) "
1474        read i
1475        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1476    fi
1477    rm -Rf $MINDI_TMP/iso
1478    mkdir -p $MINDI_TMP/iso/{images,archives}
1479    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1480    cp -f $files $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy files to $MINDI_TMP/iso/images"
1481    for i in memdisk memtest.bin memtest.img ; do
1482        j=$MINDI_LIB/$i
1483        k=$MINDI_TMP/iso
1484        if [ -e "$j" ] ; then
1485            LogAll "INFO: Copying $j to $k"
1486            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1487            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1488            if [ _"$MONDO_SHARE" != _"" ]; then 
1489                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1490            fi
1491        fi
1492    done
1493
1494    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1495    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1496
1497    # copy boot stuff now generated in PrepareDataDiskImage
1498    if [ "$BOOT_TYPE" = "UEFI" ]; then
1499        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1500        tbc="EFI"
1501    else
1502        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1503        tbc="syslinux"
1504    fi
1505
1506    MakeMessageFile $MINDI_TMP/iso/$tbc | cut -c1-80 > $MINDI_TMP/iso/$tbc/message.txt
1507
1508    if [ "$ARCH" != "ia64" ] ; then
1509        if [ $KERNEL_IS_XEN = "yes" ]; then
1510            FindMboot32Binary
1511            cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1512            cp $MBOOTC32 $MINDI_TMP/iso/$tbc/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/$tbc/mboot.c32). Did you run out of disk space?"
1513        fi
1514
1515        cp $ISOLINUX $MINDI_TMP/iso/$tbc/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1516
1517        if [ -e "$LDLINUXC32" ]; then
1518            cp $LDLINUXC32 $MINDI_TMP/iso/$tbc 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $MINDI_TMP/iso/$tbc. Did you run out of disk space?"
1519        fi
1520
1521        if [ _"$MONDO_SHARE" != _"" ]; then 
1522            cp -rf $MINDI_TMP/iso/{initrd.img,vmlinuz,$tbc} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1523            if [ $KERNEL_IS_XEN = "yes" ]; then
1524                cp -f $MINDI_TMP/iso/xen.gz $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen kernel to $MONDO_ROOT. Did you run out of disk space?"
1525            fi
1526            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1527        fi
1528        CMD="$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b $tbc/isolinux.bin -c $tbc/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1529    else
1530        CMD="$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.img -c images/boot.cat -no-emul-boot"
1531    fi
1532
1533    old_pwd=`pwd`
1534    cd "$MINDI_TMP/iso"
1535    LogFile "Invoking $CMD"
1536    $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1537    if [ "$?" -ne "0" ] ; then
1538        if [ "$BOOT_TYPE" = "UEFI" ]; then
1539            CMD=`echo $CMD | perl -p -e 's|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |'`
1540            $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1541            if [ "$?" -eq "0" ] ; then
1542                LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1543            else
1544                MakeISOErrors
1545            fi
1546        else
1547            MakeISOErrors
1548        fi
1549    else
1550        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1551    fi
1552    rm -f $MINDI_TMP/mkisofs.log
1553    cd "$old_pwd"
1554}
1555
1556MakeISOErrors() {
1557
1558LogFile "----------- $ISO_CMD's errors --------------"
1559LogAll "$CMD returned the following errors:"
1560cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1561LogAll "ERROR: Failed to create ISO image."
1562}
1563
1564
1565OfferToMakeBootableUSB() {
1566    local i files
1567    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1568        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1569        read i
1570        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1571        if [ "$USBDEVICE" = "" ]; then
1572            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1573            read dev
1574            USBDEVICE=$dev
1575        fi
1576        echo "WARNING: This will erase all content on $USBDEVICE"
1577        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1578        read i
1579        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1580    fi
1581    rm -Rf $MINDI_TMP/usb
1582    mkdir -p $MINDI_TMP/usb
1583    USBPART="${USBDEVICE}1"
1584
1585    echo -en "Transforming $USBDEVICE in a Bootable device " 
1586    echo -en "."
1587    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1588    LogFile "INFO: Checking $USBDEVICE"
1589    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1590    if [ $? -ne 0 ]; then
1591        LogAll "ERROR: Unable to access $USBDEVICE"
1592        LogAll "       Make sure your USB device is plugged in"
1593        MindiExit -1
1594    fi
1595    echo -en "."
1596    # Some distro do auto mount at that point (Ubuntu)
1597    LogFile "INFO: Unmounting $USBPART just in case"
1598    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1599    if [ "$BOOT_TYPE" = "BIOS" ]; then
1600        # If your key has no MBR it may cause an issue
1601        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1602        if [ -r $MBRFILE ]; then
1603            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1604            dd if=$MBRFILE of=$USBDEVICE
1605        else
1606            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1607            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1608        fi
1609    fi
1610    LogFile "INFO: Preparing $USBDEVICE"
1611    cat > $MINDI_TMP/fdisk.txt << EOF
1612d
1613d
1614d
1615d
1616n
1617p
16181
1619
1620
1621t
1622b
1623a
16241
1625w
1626EOF
1627    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1628    if [ $? -ne 0 ]; then
1629        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1630        LogAll "       Make sure your USB device is plugged in"
1631        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1632        MindiExit -1
1633    fi
1634    LogFile "fdisk build file"
1635    LogFile "----------------"
1636    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1637    LogFile "----------------"
1638    rm -f $MINDI_TMP/fdisk.txt
1639    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1640    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1641    echo -en "."
1642    # Calling kpartx in case devices were not created
1643    if [ -x "/sbin/kpartx" ]; then
1644        /sbin/kpartx -a $USBDEVICE
1645    fi
1646    # Some distro do auto mount at that point (Ubuntu)
1647    LogFile "INFO: Unmounting $USBPART just in case again"
1648    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1649    echo -en "."
1650    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1651    if [ "`which dmsetup`" != "" ]; then
1652        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1653        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1654            LogFile "INFO: Removing $block_id from device mapper."
1655            sleep 1
1656            dmsetup remove $block_id
1657        fi
1658    fi
1659    echo -en "."
1660    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1661    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1662    if [ $? -ne 0 ]; then
1663        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1664        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1665        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1666        MindiExit -1
1667    fi
1668    echo -en "."
1669    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1670    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1671    if [ $? -ne 0 ]; then
1672        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1673        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1674        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1675        MindiExit -1
1676    fi
1677    echo -en "."
1678    mkdir -p $MINDI_TMP/usb/images
1679    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1680    cp -f $files $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy files to $MINDI_TMP/usb/images"
1681    echo -en "."
1682    for i in memdisk memtest.bin memtest.img ; do
1683        j=$MINDI_LIB/$i
1684        k=$MINDI_TMP/usb
1685        if [ -e "$j" ] ; then
1686            LogFile "INFO: Copying $j to $k"
1687            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1688            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1689        fi
1690    done
1691    echo -en "."
1692    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1693    echo -en "."
1694    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1695    echo -en "."
1696    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1697    echo -en "."
1698    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1699    echo -en "."
1700    LogAll "----------- syslinux's conf --------------"
1701    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1702    LogAll "------------------------------------------"
1703    umount $MINDI_TMP/usb
1704    if [ "$ARCH" != "ia64" ] ; then
1705        syslinux -v 2>&1 | grep -q 4.02
1706        if [ $? -eq 0 ]; then
1707            # This buggy version of syslinux requires a call to --stupid and not -s
1708            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1709            res=$?
1710        else
1711            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1712            res=$?
1713        fi
1714        if [ $res -ne 0 ] ; then
1715            LogAll "----------- syslinux's errors --------------"
1716            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1717            LogAll "------------------------------------------"
1718            LogIt "ERROR: Failed to create USB image."
1719        else
1720            echo -e "$DONE"
1721            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1722        fi
1723        rm -f $MINDI_TMP/syslinux.log
1724    else
1725        LogAll "ERROR: No USB boot support for ia64"
1726        MindiExit -1
1727    fi
1728}
1729
1730
1731MakeMessageFile() {
1732   
1733    if [ -x "/bin/lsb_release" ]; then
1734        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1735    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1736        DESC="Arch Linux"
1737        if [ -r /var/log/pacman.log ]; then
1738            # there are no releases but we can get the last system upgrade
1739            # Output example:   Arch Linux [2011-03-03 01:39]
1740            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1741        fi
1742    elif [ -x "/etc/os-release" ]; then
1743        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1744    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1745        # For pb >= 0.9.8
1746        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1747    elif [ -r /etc/issue.net ]; then
1748        DESC=`head -1 /etc/issue.net`
1749    elif [ -r /etc/issue ]; then
1750        DESC=`head -1 /etc/issue`
1751    else
1752        DESC="Unknown desc"
1753    fi
1754    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1755    if [ _"$MONDO_SHARE" != _"" ]; then
1756        if [ "$CDRECOVERY" != "yes" ] ; then
1757            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1758                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1759                echo -en "$BOOT_MEDIA_MESSAGE"
1760            elif [ ! "$MINDI_TMP" ] ; then
1761                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1762                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1763                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1764                fi
1765            else
1766                echo -en "$BOOT_MEDIA_MESSAGE"
1767            fi
1768        else
1769            echo -en "\
1770To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1771CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1772        fi
1773    fi
1774
1775    # Also create the other help screens
1776    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1777    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1778    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1779}
1780
1781
1782MakeBootConfFile() {
1783    local options i ooo
1784    options=""
1785    # Type of boot file (elilo or syslinux/isolinux)
1786    type=$1
1787    if [ "$type" = "elilo" ]; then
1788        sep="="
1789        sepdef="="
1790    else
1791        sep=" "
1792        sepdef=" "
1793        if [ "$type" = "grub" ]; then
1794            sepdef="="
1795        fi
1796    fi
1797
1798    # Generic header for conf file
1799    if [ "$type" = "elilo" ]; then
1800        echo -en "prompt\n"
1801    elif [ "$type" = "grub" ]; then
1802        echo -en "pause Press a key when ready to restore\n"
1803    else
1804        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1805    fi
1806
1807    # Compute which default option to boot from
1808    echo -en "default${sepdef}"
1809    if [ "$CDRECOVERY" = "yes" ] ; then
1810        if [ "$type" = "grub" ]; then
1811            # TODO: Which num ???
1812            echo -en "0\n"
1813        else
1814            echo -en "RESTORE\n"
1815        fi
1816    # In case it's mondoarchive
1817    elif [ _"$MONDO_SHARE" != _"" ]; then
1818        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1819            if [ "$type" = "grub" ]; then
1820                echo -en "3\n"
1821            else
1822                echo -en "iso\n"
1823            fi
1824        else
1825            if [ "$type" = "grub" ]; then
1826                echo -en "1\n"
1827            else
1828                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1829            fi
1830        fi
1831    else
1832        if [ "$type" = "grub" ]; then
1833            echo -en "0\n"
1834        else
1835            echo -en "expert\n"
1836        fi
1837    fi
1838
1839    # Handle timeout
1840    if [ "$CDRECOVERY" != "yes" ] ; then
1841        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1842    else
1843        echo -en "timeout${sep}10000\n"
1844    fi
1845    echo -en "\n"
1846
1847    # prepare which labels will be generated
1848    if [ "$CDRECOVERY" = "yes" ] ; then
1849        options="RESTORE expert"
1850    else
1851        if [ _"$MONDO_SHARE" != _"" ]; then
1852            options="interactive expert compare iso nuke isonuke"
1853        else
1854            options="expert"
1855        fi
1856    fi
1857
1858    # Generate rest of conf file
1859    for i in $options ; do
1860        ooo=$i
1861        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1862        if [ "$type" = "elilo" ]; then
1863            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1864        elif [ "$type" = "grub" ]; then
1865            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
1866        else
1867            ps="/"
1868            if [ $KERNEL_IS_XEN = "no" ]; then
1869                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1870            else
1871                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1872            fi
1873        fi
1874        echo -en "$outstr"
1875    done
1876    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1877        if [ "$type" = "elilo" ]; then
1878            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1879            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1880        elif [ "$type" = "grub" ]; then
1881            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
1882        else
1883            ps="/"
1884            if [ "$type" = "syslinux" ]; then
1885                ps=""
1886            fi
1887            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1888            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1889        fi
1890    fi
1891}
1892
1893PrepareBootDiskImage() {
1894    # LILO originally
1895    local dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootconf bootimage
1896    kernelpath=$1
1897    retval=0
1898
1899    old_pwd=`pwd`
1900    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1901    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1902    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1903    imagefile=$MINDI_TMP/mindi-bootroot.img
1904    mkdir -p $mountpoint
1905    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1906    echo -en "..."
1907    #if [ "$BOOT_TYPE" = "UEFI" ]; then
1908        # Should be GPT in that case to allow direct boot
1909        #parted -s $imagefile mklabel gpt
1910        #parted -s $imagefile mkpart fat32 1 ${BOOT_SIZE}k 2> /dev/null
1911        #kpartx -a $imagefile
1912        #imagefile2=/dev/mapper/`kpartx -l $imagefile | awk '{print $1}'`
1913    #else
1914        #imagefile2=$imagefile
1915    #fi
1916    LogFile "INFO: Creating vfat filesystem on $imagefile"
1917    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1918
1919    if [ "$BOOT_TYPE" = "BIOS" ]; then
1920        # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1921        # and run after the formating for versions > 6 it seems
1922        syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1923    fi
1924
1925    # Only move it now to its final destination and use it now
1926    mv $imagefile $MINDI_CACHE
1927    imagefile=$MINDI_CACHE/mindi-bootroot.img
1928
1929    mount -t vfat -o loop $imagefile $mountpoint || Die "ERROR: Cannot mount $imagefile on $mountpoint (PBDI)"
1930
1931    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1932    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1933    if [ "$?" -ne "0" ] ; then
1934        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1935        LogAll "       Please unload some of your modules and try again."
1936        LogAll "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1937        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1938        retval=$(($retval+1))
1939    fi
1940    #MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1941
1942    mkdir -p $mountpoint/tmp
1943    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1944        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1945    fi
1946
1947    # copy the kernel across
1948    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1949    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1950    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1951
1952    retval=0
1953    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1954    retval=$?
1955    if [ $KERNEL_IS_XEN = "yes" ]; then
1956        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1957        let retval+=$?
1958    fi
1959 
1960    if [ "$retval" -ne "0" ] ; then
1961        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1962        du -sk $mountpoint/* >> $LOGFILE
1963        LogFile "--- end of list of files ---"
1964        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1965        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1966        cd "$old_pwd"
1967        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1968        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1969        [ "$imagefile" != "" ] && rm -f $imagefile
1970        LogIt "ERROR: Sorry, your kernel is too big for your image"
1971        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1972    fi
1973    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1974    LogFile "INFO: Free space left on image = $free_space KB"
1975    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1976
1977    # make it bootable
1978    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1979    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1980
1981    # copy boot stuff now generated in PrepareDataDiskImage
1982    if [ "$BOOT_TYPE" = "UEFI" ]; then
1983        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1984    else
1985        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
1986    fi
1987
1988    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1989    echo -en "..."
1990    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1991
1992    if [ "$retval" -eq "0" ] ; then
1993        echo -en "...$DONE\n"
1994        LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1995    else
1996        echo -en "...failed\n"
1997        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1998    fi
1999    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning $retval"
2000    return $retval
2001}
2002
2003ParseModprobeForIncludes() {
2004local MODPROBE_CONF mpincfile includes include
2005
2006MODPROBE_CONF=/etc/modprobe.conf
2007mpincfile=$1
2008touch $mpincfile
2009if [ -a $MODPROBE_CONF ]; then
2010    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2011    if [ -n "$includes" ]; then
2012        for include in $includes
2013        do
2014            if [ -a "$include" ]; then
2015                echo $include >> $mpincfile
2016            fi
2017        done
2018    fi
2019fi
2020}
2021
2022
2023PrepareDataDiskImages() {
2024    local needlist bigdir diskdir res i j k old_pwd lines lfiles includefile
2025
2026    rm -f $MINDI_CACHE/mindi.iso
2027    needlist=$MINDI_TMP/what-we-need.txt
2028    bigdir=$MINDI_TMP/bigdir
2029    mkdir -p $bigdir/usr/bin
2030    mkdir -p $bigdir/usr/sbin
2031    includefile=$MINDI_TMP/$$.includefile.txt
2032
2033    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2034    if [ -e "$DEPLIST_FILE" ]; then
2035        lfiles="$DEPLIST_FILE $lfiles"
2036    fi
2037    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2038    ParseModprobeForIncludes $includefile
2039    lines=$(($lines+`cat $includefile | wc -l`))
2040    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2041    res=$?
2042    rm -f $includefile
2043    ListKernelModulePaths >> $needlist
2044    if [ "$res" -ne "0" ] ; then
2045        Die "You have $res files present in dependency list\nbut absent from filesystem."
2046    fi
2047    mkdir -p $bigdir/tmp
2048    if [ _"$MONDO_SHARE" != _"" ]; then
2049        # TODO: no reason to have the cfg file stored twice
2050        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2051        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2052    fi
2053
2054    # Needs to be done after the MRCFG creation
2055    FindAndAddUserKeyboardMappingFile
2056
2057    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2058    DropOptimizedLibraries $needlist $bigdir
2059    echo -en "Assembling dependency files"
2060
2061    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2062
2063    # also copy io.sys and msdos.sys, if we can find them
2064    for i in `mount | cut -d' ' -f3` ; do
2065        for j in io.sys msdos.sys ; do
2066            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2067        done
2068    done
2069
2070    # master boot record, too
2071    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2072    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2073        LogAll "INFO: Backing up $i's MBR"
2074        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2075        sleep 1
2076        sync
2077        j=$i
2078        [ -h "$j" ] && j=`readlink -f $j`
2079        LogAll "INFO: Creating /dev/boot_device ($j)"
2080        mkdir -p $bigdir/dev
2081        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2082    fi
2083
2084    old_pwd=`pwd`
2085    cd "$bigdir"
2086
2087    # Get terminfo content
2088    ti="usr/share/terminfo/l"
2089    if [ -d /$ti ]; then
2090        mkdir -p $ti
2091        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2092    fi
2093    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2094        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2095        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2096    fi
2097    if [ -d "/lib/dev-state" ]; then 
2098        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2099    fi
2100    cd "$old_pwd"
2101    echo -e "$DONE"
2102    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2103    MakeMountlist $MINDI_TMP/mountlist.txt
2104    CheckMountlist $MINDI_TMP/mountlist.txt
2105    mkdir -p $bigdir/tmp
2106    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2107    if [ _"$MONDO_SHARE" != _"" ]; then
2108        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2109    fi
2110    if [ $LVM != "false" ]; then
2111        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2112        if [ "$?" -ne "0" ]; then
2113            LVM="false"
2114            rm -f $bigdir/tmp/i-want-my-lvm
2115        else
2116            LogFile "Your i-want-my-lvm file content is:"
2117            LogFile "-----------------------------------"
2118            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2119            LogFile "-----------------------------------"
2120        fi
2121    fi
2122    LogFile "Your mountlist.txt file content is:"
2123    LogFile "-----------------------------------"
2124    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2125    LogFile "-----------------------------------"
2126
2127    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2128    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2129    if [ _"$MONDO_SHARE" != _"" ]; then
2130        for q in filelist.full.gz biggielist.txt ; do
2131            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2132            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2133        done
2134    fi
2135
2136    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2137    # to get it on the media (in addition to the boot part
2138    # and also to support UEFI boot mechanism
2139    bootdir=$bigdir/syslinux
2140    bootconf="$bootdir/syslinux.cfg"
2141    boottype=syslinux
2142    mkdir -p $bootdir
2143    if [ "$BOOT_TYPE" != "BIOS" ]; then
2144        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2145            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2146            MindiExit -1
2147        fi
2148        # EFI or UEFI
2149        # TODO: names are hard-coded for now
2150        if [ "$BOOT_TYPE" = "UEFI" ]; then
2151            # UEFI
2152            efidir=$bigdir/EFI/BOOT
2153            # On RHEL6 grub works
2154            dname=`pbdistrocheck | grep -E '^Name:' | cut -d':' -f2`
2155            dver=`pbdistrocheck | grep -E '^Ver:' | cut -d':' -f2`
2156            if [ $dname = "rhel" ] && [ $dver = "6" ]; then
2157                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2158                bootconf="$efidir/grub.conf"
2159                boottype=grub
2160            elif [ $dname = "rhel" ] && [ $dver = "7" ]; then
2161                bootbin=`find /boot/efi -iname "grub*.efi" | head -1`
2162                bootconf="$efidir/grub.conf"
2163                boottype=grub2
2164            else
2165                # Use syslinux.efi as the default boot loader ... but it doesn't work for now :-(
2166                FindSyslinux64EFI
2167                bootbin=$SYSLINUX64EFI
2168                bootconf="$efidir/syslinux.cfg"
2169            fi
2170        else
2171            # EFI
2172            efidir=$bootdir
2173            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2174            boottype=elilo
2175            bootconf="$efidir/elilo.conf"
2176        fi
2177        LogAll "Found $boottype boot type"
2178
2179        # Copy it so that CD-ROM menu entry is satisfied
2180        mountefi=0
2181        df -T | grep /boot/efi | grep -qE 'vfat'
2182        if [ $? -ne 0 ]; then
2183            mount /boot/efi
2184            if [ $? -ne 0 ]; then
2185                echo "You have to mount your (U)EFI partition when using mindi"
2186                MindiExit -1
2187            fi
2188            mountefi=1
2189        fi
2190        mkdir -p $efidir
2191        cp $bootbin $efidir
2192        if [ $mountefi -eq 1 ]; then
2193            umount /boot/efi 2>&1 > /dev/null
2194        fi
2195
2196        if [ $boottype = "syslinux" ]; then
2197            FindLdlinuxe64Binary
2198            if [ -e "$LDLINUXE64" ]; then
2199                LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2200                cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2201            fi
2202        fi
2203    else   
2204        # Useful for syslinux 5.x
2205        FindLdlinux32Binary
2206        if [ -e "$LDLINUXC32" ]; then
2207            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2208            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir). Did you run out of disk space?"
2209        fi
2210    fi
2211
2212    MakeBootConfFile $boottype > $bootconf
2213
2214    echo -en "Tarring and zipping the data content..."
2215    size_of_all_tools=`du -sk $bigdir | cut -f1`
2216    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2217    LogFile "Size of the data content"
2218    LogFile "------------------------"
2219    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2220    LogFile "------------------------"
2221    echo -e "$DONE"
2222
2223    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2224    rm -rf $bigdir
2225    rm -f $needlist
2226}
2227
2228
2229Prompt() {
2230    echo -en "$1"
2231    read line
2232}
2233
2234
2235ReadLine() {
2236    local i incoming
2237    read incoming
2238    i=0
2239    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2240        i=$(($i+1))
2241        read incoming
2242    done
2243    echo "$incoming"
2244}
2245
2246
2247SizeOfPartition() {
2248    local devpath drive res stub
2249    device=$1
2250    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2251        Die "Cannot find $device's size - is your /etc/fstab sane?"
2252    fi
2253    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2254        res=`SizeOfRaidPartition $device`
2255        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2256        echo "$res"
2257        return 0
2258    fi
2259    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2260    res=`$FDISK -s $device 2>> $LOGFILE`
2261    # end patch
2262    # take only the first in case of multiple mount (cifs, nfs, ...)
2263    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2264    [ "$res" = "" ] && res="-1"
2265    echo $res
2266    return 0
2267}
2268
2269
2270SizeOfRaidPartition() {
2271    local real_dev smallest_size silly tmp
2272
2273    silly=999999999
2274    smallest_size=$silly
2275
2276    for real_dev in `GetRaidDevMembers $1` ; do
2277        tmp=`SizeOfPartition $real_dev`
2278        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2279    done
2280
2281    if [ "$smallest_size" = "$silly" ] ; then
2282        echo "-1"
2283        return 1
2284    else
2285        echo "$smallest_size"
2286        return 0
2287    fi
2288}
2289
2290
2291StripExecutable()
2292{
2293    local tmpfile
2294
2295    tmpfile=$MINDI_TMP/stripped.$$.dat
2296    [ -d "$1" ] || [ -h "$1" ] && return
2297    cp -f $1 $tmpfile 2>> $LOGFILE
2298    strip $tmpfile 2> /dev/null
2299    if [ "$?" -eq "0" ] ; then
2300        cp -f $tmpfile $1 2>> $LOGFILE
2301        LogFile "INFO: Stripped binary $2"
2302    fi
2303    rm -f $tmpfile
2304}
2305
2306KernelVer() {
2307        local fkern_ver fname
2308
2309        fname=$1
2310        file $fname | grep -q gzip
2311        if [ "$?" -eq "0" ] ; then
2312            # Used by ia64
2313            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2314        else
2315            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2316        fi
2317        echo "$fkern_ver"
2318}
2319
2320
2321# WARNING: This function should just echo the final result !!!
2322#
2323TryToFindKernelPath() {
2324    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2325
2326    we_want_version=$KERVERRUN
2327    possible_kernels=""
2328    duff_kernels=""
2329    output=""
2330
2331    if [ "$ARCH" = "ia64" ] ; then
2332       root="/boot/efi/efi"
2333    else
2334       root="/"
2335    fi
2336    # See if we're booted from a Xen kernel
2337    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2338    if [ -f /proc/xen/capabilities ]; then
2339        # It's a Xen kernel
2340        KERNEL_IS_XEN="yes"
2341        LogFile "INFO: It's a Xen kernel..."
2342    fi
2343
2344    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2345        [ ! -e "$fname" ] && continue
2346        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2347        fkern_ver=`KernelVer $fname`
2348        [ "$fkern_ver" = "" ] && continue
2349        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2350        [ -f "$fname" ] || continue
2351        [ -h "$fname" ] && continue
2352        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2353        file $fname | grep -q gzip
2354        if [ "$?" -eq "0" ] ; then
2355            # Used by ia64
2356            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2357                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2358                duff_kernels="$fname $duff_kernels"
2359            else
2360                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2361                possible_kernels="$fname $possible_kernels"
2362            fi
2363        else
2364            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2365                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2366                duff_kernels="$fname $duff_kernels"
2367            else
2368                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2369                possible_kernels="$fname $possible_kernels"
2370            fi
2371        fi
2372    done
2373    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2374        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2375    fi
2376    if [ ! "$possible_kernels" ] ; then
2377        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2378        possible_kernels="$duff_kernels"
2379        if [ ! "$possible_kernels" ] ; then
2380            LogAll "INFO: Sorry, no duff kernels either"
2381        else
2382            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2383            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2384        fi
2385    fi
2386    if [ $KERNEL_IS_XEN = "yes" ]; then
2387        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2388        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2389    fi
2390    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2391    noof_kernels=`CountItemsIn "$possible_kernels"`
2392    if [ "$noof_kernels" -eq "0" ] ; then
2393        LogAll "Could not find your kernel."
2394        if [ -e "/boot/vmlinuz" ] ; then
2395            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2396            output=/boot/vmlinuz
2397        else
2398            output=""
2399        fi
2400    elif [ "$noof_kernels" -eq "1" ] ; then
2401        kp=`echo "$possible_kernels" | sed s/' '//`
2402        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2403        output="$kp"
2404    else
2405        for i in $possible_kernels ; do
2406            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2407                LogAll "INFO: OK, I used my initiative and found that "
2408                LogAll "INFO: $i is probably your kernel. "
2409                output="$i"
2410                break
2411            fi
2412        done
2413        if [ ! -n "$output" ]; then
2414            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2415                output=/boot/vmlinuz
2416                LogFile "INFO: Schlomo, this one's for you."
2417            else
2418                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2419                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2420                LogFile "INFO: $possible_kernels"
2421                output=""
2422            fi
2423        fi
2424    fi
2425    if [ $KERNEL_IS_XEN = "yes" ]; then
2426        if [ "$noof_xenkernels" -eq "0" ]; then
2427            xenkernelpath=""
2428        elif [ "$noof_xenkernels" -eq "1" ]; then
2429            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2430            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2431        else
2432            for i in $possible_xenkernels ; do
2433                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2434                    LogFile "INFO: OK, I used my initiative and found that "
2435                    LogFile "INFO: $i is probably your Xen kernel. "
2436                    xenkernelpath="$i"
2437                    break
2438                fi
2439            done
2440            if [ ! -n "$xenkernelpath" ]; then
2441                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2442                if [ ! -n "$new_possible_xenkernels" ]; then
2443                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2444                    LogFile "INFO: Using $xenkernelpath"
2445                else
2446                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2447                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2448                    LogFile "INFO: $possible_xenkernels"
2449                    output=""
2450                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2451                    LogFile "INFO: Using $xenkernelpath"
2452                fi
2453            fi
2454        fi
2455        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2456            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2457        fi
2458    fi
2459    #LogAll "TryToFindKernelPath found $output"
2460    echo "$output"
2461}
2462
2463
2464TurnTgzIntoRdz() {
2465    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink templog
2466
2467    tgz_dir_fname=$1
2468    rdz_fname=$2
2469    kernelsize=$3
2470    maxsize=$(($BOOT_SIZE-$kernelsize))
2471    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2472    tempfile=$MINDI_TMP/temp.rd
2473    res=0 
2474    templog=$MINDI_TMP/$$.log
2475    > $templog
2476
2477    echo -en "..."
2478    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2479    echo -en "..."
2480    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2481    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2482    echo -en "..."
2483    mkdir -p $mountpoint
2484    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2485    echo -en "..."
2486    old_pwd=`pwd`
2487    cd "$mountpoint"
2488
2489    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2490    for d in bin sbin lib lib64; do
2491        if [ -h "/$d" ]; then
2492            thelink=`readlink /$d`
2493            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2494            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2495            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2496                rmdir $mountpoint/$d
2497            fi
2498            if [ ! -h $mountpoint/$d ]; then
2499                rm -f $mountpoint/$d 2> /dev/null
2500                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2501            fi
2502        fi
2503    done
2504
2505    LogFile "INFO: what is now in $mountpoint"
2506    ls -alR $mountpoint >> $LOGFILE
2507   
2508    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2509    # copy from rootfs into mountpoint
2510    for f in $tgz_dir_fname/*; do 
2511        if [ ! -r $f ]; then
2512            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2513        else
2514            cp -af $f . 2>&1 >> $LOGFILE
2515        fi
2516    done
2517    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2518    ln -sf usr/sbin/init linuxrc
2519
2520    cd dev || Die "Can't cd to dev"
2521    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2522    rm -f dev-entries.tgz
2523    cd ..
2524
2525    for w in insmod.static insmod.static.old ; do
2526        s=`which $w 2> /dev/null`
2527        if [ -e "$s" ] ; then
2528            tar cf - -C / $s 2> /dev/null | tar xf -
2529        fi
2530    done
2531
2532    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2533   
2534    # Copy of files mandatory for ssh to automate mount if sshfs is used
2535    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2536    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2537    cat > $mountpoint/tmp/myssh << EOF
2538ssh -o StrictHostKeyChecking=no $*
2539EOF
2540    chmod 755 $mountpoint/tmp/myssh
2541
2542    # Copy of files mandatory for ld.so
2543    cp -a /etc/ld.so.c* $mountpoint/etc
2544
2545    # Handle the case where busybox and mount are dynamically linked
2546    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2547    if [ $? -eq 0 ]; then
2548        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2549        rm -f bin/mount
2550    fi
2551
2552    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2553    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2554    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2555        if [ -d $f ]; then
2556            for g in `find $f`; do 
2557                echo $g >> $MINDI_TMP/minimal.lis
2558                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2559            done
2560        else 
2561            if [ -r $f ]; then
2562                echo $f >> $MINDI_TMP/minimal.lis
2563                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2564            fi
2565        fi
2566    done
2567    LogAll "Processing all dependencies of required files..."
2568    for f in `sort -u $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis`; do
2569        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2570    done
2571    # Initial / are trucated by tar
2572    finallist=""
2573    # Remove directories from the list, as tar/cp will create them anyway
2574    # and it may hurt if /lib is in it as on Debian/Ubuntu
2575    # recent bash says that -d is true for a link to a dir !
2576    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2577        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2578            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2579            if [ ! -e "$mountpoint/$f" ]; then
2580                finallist="$finallist $f"
2581            fi
2582        fi
2583    done
2584    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2585
2586    fnllist=`echo $finallist | sort -u`
2587    #tar cf - $finallist 2> $templog | tar xf - || LogIt "WARNING: Problem in minimal analysis" $templog
2588    echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $templog
2589    cp -a --parents $fnllist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog
2590
2591    # In case target /bin dir still doesn't exist, create it before using it
2592    if [ ! -d $mountpoint/bin ]; then
2593        mkdir -p $mountpoint/bin
2594    fi
2595
2596    # For older distributions expecting /sbin/init provides it
2597    if [ ! -e "sbin/init" ]; then
2598        (cd sbin ; ln -sf ../usr/sbin/init .)
2599    fi
2600
2601    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2602    ln -sf /bin/bash bin/sh
2603    LogFile "INFO: Using bash as default shell"
2604
2605    # Avoids an issue on some distro (RHEL5)
2606    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2607
2608    mkdir -p $mountpoint/tmp
2609    # Management of udev (which includes modprobe in rules)
2610    ps auxww | grep -v grep | grep -qw udevd
2611    if [ $? -eq 0 ]; then
2612        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2613        LogFile "INFO: udev device manager found"
2614        tar cf - -C / /etc/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $templog
2615        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2616        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2617        # Do not do it if it's a link (Ubuntu 64 bits #503)
2618        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2619            tar cf - -C / /lib64/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $templog
2620        fi
2621        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2622            tar cf - -C / /lib32/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $templog
2623        fi
2624        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2625            tar cf - -C / /lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $templog
2626        fi
2627        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2628            tar cf - -C / /usr/lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog
2629        fi
2630        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ] || [ -x /lib/systemd/systemd-udevd ]; then
2631            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2632            lis=""
2633            # Get only the files which exist in that list
2634            # and potentially their symlink structure
2635            for i in $lis2; do
2636                if [ -h $i ]; then
2637                    j=$i
2638                    while [ -h $j ]; do
2639                        lis="$lis $j"
2640                        j=`readlink -f $j`
2641                    done
2642                    lis="$lis $j"
2643                elif [ -f $i ]; then
2644                    lis="$lis $i"
2645                fi
2646            done
2647            # And their deps
2648            LocateDeps $lis > $MINDI_TMP/udev.lis
2649            for i in $lis; do
2650                if [ "`echo $i | cut -c1`" = "/" ]; then
2651                    j=`echo $i | cut -c2-`
2652                    [ "$j" != "" ] && rm -f $j
2653                fi
2654                echo "$i" >> $MINDI_TMP/udev.lis
2655            done
2656            finallist=""
2657            # Remove directories from the list, as tar/cp will create them anyway
2658            # and it may hurt if /lib is in it as on Debian/Ubuntu
2659            # recent bash says that -d is true for a link to a dir !
2660            for f in `sort -u $MINDI_TMP/udev.lis`; do
2661                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2662                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2663                    if [ ! -e "$mountpoint/$f" ]; then
2664                        finallist="$finallist $f"
2665                    fi
2666                fi
2667            done
2668            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $templog
2669            echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $templog
2670            cp -a --parents $finallist -t $mountpoint/ 2> $templog  || LogIt "ERROR: Problem in udev.lis analysis" $templog
2671            rm -f $MINDI_TMP/udev.lis
2672        else
2673            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2674            LogAll "         mindi will use static devices which may cause problems"
2675            rm -f $mountpoint/tmp/USE-UDEV
2676        fi
2677    fi
2678
2679    # Management of potential HW info (ProLiant only at the moment)
2680    rm -rf $MINDI_CACHE/bkphw
2681    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2682    if [ -d $MINDI_CACHE/bkphw ]; then
2683        LogIt "INFO: Hardware Information found and saved ..."
2684        cp -rp $MINDI_CACHE/bkphw .
2685        if [ -f $MINDI_CACHE/tools.files ]; then
2686            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2687            LocateDeps $lis > $MINDI_TMP/tools.lis
2688            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $templog
2689        fi
2690        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2691            mv -f $MINDI_CACHE/mindi-rsthw .
2692            chmod 755 ./mindi-rsthw
2693        fi
2694        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2695    fi
2696
2697    # Management of perl scripts delivered needed at restore time
2698    LogAll "Analyzing perl modules dependencies..."
2699    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog
2700    LogFile "DBG4: Perl Modules found:"
2701    LogFile "-------------------------"
2702    cat $MINDI_TMP/perl.lis >> $LOGFILE
2703    LogFile "-------------------------"
2704    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $templog
2705
2706    for w in cdrom groovy-stuff ; do
2707        mkdir -p mnt/$w
2708    done
2709
2710    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $templog
2711
2712    echo -en "..."
2713    cd /
2714
2715    needed_modules=""
2716    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2717
2718    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2719        # For PXE boot
2720        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2721    fi
2722    for i in $DENY_MODS; do
2723        LogFile "INFO: Removing $i from the list of modules to load"
2724        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2725    done
2726
2727    if [ "${kernelname}" != "" ]; then
2728        needed_modules_path=lib/modules/${kernelname}
2729        mkgmopt="-k ${kernelname}"
2730    else
2731        needed_modules_path=lib/modules/$KERVERRUN
2732        mkgmopt="-k $KERVERRUN"
2733    fi
2734
2735    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2736    LogAll "Analyzing kernel modules dependencies..."
2737    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2738
2739    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2740    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog
2741
2742    # Uncompress modules if not using udev and native modprobe
2743    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2744        for i in $needed_modules; do
2745            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2746                gunzip -f $mountpoint/$i
2747            fi
2748            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2749                bunzip2 -f $mountpoint/$i
2750            fi
2751            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2752                unxz -f $mountpoint/$i
2753            fi
2754            LogFile "INFO: Uncompressing $i"
2755        done
2756    fi
2757
2758    # Also copy modules.* in case of udev so that normal modprobe works
2759    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog
2760
2761    # Copy FW in case some drivers needs it
2762    for d in "/lib" "/usr/lib"; do
2763        if [ -d "$d/firmware" -a ! -h $d ]; then
2764            cp -a "$d/firmware" "$mountpoint/$d"
2765        fi
2766    done
2767
2768    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2769    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2770        if [ -d "$d/multipath" -a ! -h $d ]; then
2771            cp -a "$d/multipath" "$mountpoint/$d"
2772        fi
2773    done
2774
2775    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2776    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2777
2778    # Copy an additional ProLiant tool for OBDR support
2779    if [ -f $MINDI_TMP/OBDR ]; then
2780        found=0
2781        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2782            mkdir -p $mountpoint/usr/bin
2783            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2784            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2785            found=1
2786        fi
2787        if [ -x /usr/bin/sg_wr_mode ]; then
2788            mkdir -p $mountpoint/usr/bin
2789            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2790            LocateDeps $lis > $MINDI_TMP/obdr.lis
2791            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $templog)
2792            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2793            found=1
2794        fi
2795        if [ $found -eq 0 ]; then
2796            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2797            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2798        fi
2799    fi
2800
2801    if [ ! -e "/sbin/devfsd" ]; then
2802        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2803        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2804        rm -f $mountpoint/sbin/devfsd
2805    fi
2806    cd "$old_pwd"
2807    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2808    if [ _"$MONDO_SHARE" != _"" ]; then
2809        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2810        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2811        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2812        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2813        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2814    fi
2815
2816    # Create module list to load at restore time
2817    rm -f $mountpoint/tmp/modules
2818    for m in $CDROM_MODS; do
2819        echo $m >> $mountpoint/tmp/modules
2820    done
2821
2822    # copy boot stuff now generated in PrepareDataDiskImage
2823    if [ "$BOOT_TYPE" = "UEFI" ]; then
2824        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
2825    else
2826        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./syslinux)
2827    fi
2828
2829    mkdir -p $mountpoint/proc
2830    LogFile "---------------------------"
2831    LogFile "Size of initial ramdisk:"
2832    LogFile "---------------------------"
2833    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2834    LogFile "---------------------------"
2835    LogFile "Content of initial ramdisk:"
2836    LogFile "---------------------------"
2837    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2838    LogFile "---------------------------"
2839
2840    # Determine what filesystem to use for initrd image
2841    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2842    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2843    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2844    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2845        # say what will be used
2846        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2847        # kernel expects linuxrc in ext2 filesystem
2848        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2849        # unmount loop filesystem and create image file using the standard approach
2850        umount $mountpoint || Die "Cannot unmount $tempfile"
2851        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2852        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2853            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2854        else
2855            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2856        fi
2857        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2858        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2859        rm -f ${rdz_fname}.tmp
2860        # log that we are done
2861        LogFile "      ...done."
2862    elif [ "$gvFileSystem" = "initramfs" ]; then
2863        # say what will be used
2864        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2865        # make sure that cpio is there
2866        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2867        # go into filesystem
2868        cd "$mountpoint"
2869        # kernel expects init in cpio filesystem
2870        ln -sf usr/sbin/init init
2871        # create cpio image file and unmount loop filesystem
2872        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2873        cd "$old_pwd"
2874        umount $mountpoint || Die "Cannot unmount $tempfile"
2875        # log that we are done
2876        LogFile "      ...done."
2877    else
2878        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2879    fi
2880
2881    if [ "$res" -eq "0" ] ; then
2882        echo -en "..."
2883    else
2884        echo -en "\rMade an rdz WITH ERRORS.           \n"
2885    fi
2886    return 0
2887}
2888
2889
2890##############################################################################
2891#----------------------------------- Main -----------------------------------#
2892##############################################################################
2893
2894# Now we can create what we need
2895mkdir -p $MINDI_TMP
2896
2897# --nolog needs to be first, and is used in analyze-my-lvm
2898if [ "$1" = "--nolog" ] ; then
2899    shift
2900    LOGFILE=/dev/stderr
2901else
2902    > $LOGFILE
2903fi
2904if [ "$1" = "--printvar" ] ; then
2905    shift
2906    if [ _"$1" != _"" ] ; then
2907        set | grep -Ew "^$1" | cut -d= -f2
2908    fi
2909    exit 0
2910fi
2911
2912LogFile "mindi v$MINDI_VERSION"
2913LogFile "$ARCH architecture detected"
2914LogFile "mindi called with the following arguments:"
2915echo "$@">> $LOGFILE
2916LogFile "Start date : `date`"
2917LogFile "-----------------------------"
2918
2919[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2920
2921# Log some capital variables
2922[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2923[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2924LogFile "MONDO_SHARE = $MONDO_SHARE"
2925LogFile "MINDI_LIB = $MINDI_LIB"
2926LogFile "MINDI_SBIN = $MINDI_SBIN"
2927LogFile "MINDI_CONF = $MINDI_CONF"
2928# Purge from potential old run
2929if [ _"$MINDI_CACHE" = _"" ]; then
2930    Die "MINDI_CACHE undefined"
2931else
2932    LogFile "MINDI_CACHE = $MINDI_CACHE"
2933fi
2934
2935if [ -f $MINDI_CONFIG ]; then
2936    LogFile "-----------------------------"
2937    LogFile " Mindi configuration file    "
2938    LogFile "-----------------------------"
2939    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2940    LogFile "-----------------------------"
2941fi
2942LogFile "In Mindi"
2943LogFile "--------"
2944LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2945LogFile "BOOT_SIZE = $BOOT_SIZE"
2946LogFile "--------"
2947
2948trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2949
2950# Sanity checks
2951which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2952which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2953which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2954which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2955if which awk &> /dev/null ; then
2956    if ! which gawk &> /dev/null ; then
2957        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2958    fi
2959fi
2960which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2961[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2962
2963[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2964
2965# Update the PATH variable if incomplete
2966if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2967    PATH=$PATH:/sbin:/usr/sbin
2968    export PATH
2969    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2970    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2971    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2972fi
2973
2974if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2975    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2976fi
2977
2978### TODO
2979### Fix as it's not mandatory on ia64
2980if [ "$ARCH" = "ia64" ] ; then
2981    if which elilo &> /dev/null ; then
2982        LILO_EXE=elilo
2983    else
2984        LILO_EXE=`which false 2> /dev/null`
2985    fi
2986else
2987    FindIsolinuxBinary
2988fi
2989trap "Aborted" SIGTERM
2990DONE="\r\t\t\t\t\t\t\t\tDone.         "
2991kernelpath=""
2992MONDO_ROOT=/var/cache/mondo
2993mkdir -p $MONDO_ROOT
2994
2995if [ -d "/proc/lvm" ]; then
2996    # LVM v1
2997    LVMCMD=""
2998    LVM="v1"
2999elif [ -d "/dev/mapper" ]; then
3000    # LVM v2
3001    LVMCMD="lvm"
3002    LVM="v2"
3003else
3004    LVM="false"
3005fi
3006
3007if [ -e "/proc/cmdline" ]; then
3008    CMDLINE="/proc/cmdline"
3009elif [ -e "/tmp/cmdline" ]; then
3010    CMDLINE="/tmp/cmdline"
3011else
3012    CMDLINE="/dev/null"
3013fi
3014
3015LogFile "INFO: LVM set to $LVM"
3016LogFile "----------"
3017LogFile "mount result:"
3018LogFile "-------------"
3019mount >> $LOGFILE
3020if [ -e "/etc/raidtab" ]; then
3021    LogFile "-------------"
3022    LogFile "/etc/raidtab content:"
3023    LogFile "-------------"
3024    cat /etc/raidtab >> $LOGFILE
3025else
3026    LogFile "No file /etc/raidtab"
3027fi
3028if [ -e "/etc/mdadm.conf" ]; then
3029    LogFile "-------------"
3030    LogFile "/etc/mdadm.conf content:"
3031    LogFile "-------------"
3032    cat /etc/mdadm.conf >> $LOGFILE
3033else
3034    LogFile "-------------"
3035    LogFile "No file /etc/mdadm.conf"
3036fi
3037LogFile "-------------"
3038LogFile "cat $CMDLINE"
3039LogFile "-------------"
3040cat $CMDLINE >> $LOGFILE
3041LogFile "-------------"
3042LogFile "cat /proc/swaps:"
3043LogFile "-------------"
3044cat /proc/swaps >> $LOGFILE
3045LogFile "-------------"
3046if [ -e "/proc/mdstat" ]; then
3047    LogFile "cat /proc/mdstat:"
3048    LogFile "-------------"
3049    cat /proc/mdstat >> $LOGFILE
3050else
3051    LogFile "No pseudo file /proc/mdstat"
3052fi
3053LogFile "-------------"
3054LogFile "cat /proc/partitions:"
3055LogFile "-------------"
3056cat /proc/partitions >> $LOGFILE
3057LogFile "-------------"
3058LogFile "cat /proc/filesystems:"
3059LogFile "-------------"
3060cat /proc/filesystems >> $LOGFILE
3061LogFile "-------------"
3062LogFile "lsmod result:"
3063LogFile "-------------"
3064lsmod >> $LOGFILE
3065MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3066if [ -x /usr/sbin/esxcfg-module ]; then
3067    LogFile "-------------"
3068    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3069    LogFile "-------------"
3070    LogFile "VMWare modules"
3071    LogFile "-------------"
3072    /usr/sbin/esxcfg-module -l >> $LOGFILE
3073    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3074fi
3075LogFile "-------------" 
3076LogFile "FORCE_MODS:"
3077LogFile "-------------"
3078LogFile "$FORCE_MODS"
3079LogFile "-------------"
3080LogFile "DENY_MODS:"
3081LogFile "-------------"
3082LogFile "$DENY_MODS"
3083LogFile "-------------"
3084LogFile "df result:"
3085LogFile "----------"
3086df -aT >> $LOGFILE
3087LogFile "-------------"
3088LogFile "df -i result:"
3089LogFile "----------"
3090df -i >> $LOGFILE
3091LogFile "-------------"
3092if [ -r /boot/grub/menu.lst ]; then
3093    LogFile "-------------"
3094    LogFile "INFO: /boot/grub/menu.lst content"
3095    LogFile "-------------"
3096    cat /boot/grub/menu.lst >> $LOGFILE
3097    LogFile "-------------"
3098fi
3099if [ -r /boot/grub/grub.conf ]; then
3100    LogFile "-------------"
3101    LogFile "INFO: /boot/grub/grub.conf content"
3102    LogFile "-------------"
3103    cat /boot/grub/grub.conf >> $LOGFILE
3104    LogFile "-------------"
3105fi
3106if [ -r /boot/grub/grub.cfg ]; then
3107    LogFile "-------------"
3108    LogFile "INFO: /boot/grub/grub.cfg content"
3109    LogFile "-------------"
3110    cat /boot/grub/grub.cfg >> $LOGFILE
3111    LogFile "-------------"
3112fi
3113if [ -r /boot/grub/device.map ]; then
3114    LogFile "-------------"
3115    LogFile "INFO: /boot/grub/device.map content"
3116    LogFile "-------------"
3117    cat /boot/grub/device.map >> $LOGFILE
3118    LogFile "-------------"
3119fi
3120if [ -r /etc/lilo.conf ]; then
3121    LogFile "-------------"
3122    LogFile "INFO: /etc/lilo.conf content"
3123    LogFile "-------------"
3124    cat /etc/lilo.conf >> $LOGFILE
3125fi
3126if [ -d /boot/efi ]; then
3127    gcf=`find /boot/efi -name 'grub.c*'`
3128    if [ _"$gcf" = _"" ]; then
3129        LogFile "Found a /boot/efi directory without a grub config file in it"
3130    else
3131        LogFile "-------------"
3132        LogFile "INFO: $gcf content"
3133        LogFile "-------------"
3134        cat $gcf >> $LOGFILE
3135        LogFile "-------------"
3136    fi
3137fi
3138
3139LogFile "Full fdisk info"
3140LogFile "---------------"
3141$FDISK -l >> $LOGFILE
3142LogFile "----------------"
3143
3144# Compute libata version
3145laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3146# If libata v2 is used then remove ide-generic as it will perturbate boot
3147if [ "`echo $MODULES | grep libata`" ]; then
3148    if [ "$laver" = "2" ]; then
3149        DENY_MODS="$DENY_MODS ide-generic"
3150        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3151        LogFile "-------------"
3152    fi
3153fi
3154
3155# Check for McAfee which disturbs the access to some files (tgz in articular)
3156if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3157    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3158    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3159    LogFile "WARNING: You have two options:"
3160    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3161    LogFile "WARNING:  - Disable the scanner during the backup"
3162fi
3163
3164# Check for ISO_CMD command
3165if [ ! -x $ISO_CMD ]; then
3166    LogFile "NOTE: No CD image (ISO file) utility found"
3167fi
3168
3169FLOPPY_WAS_MOUNTED=""
3170for mtpt in /media/floppy /mnt/floppy /floppy ; do
3171    if mount | grep -w $mtpt &> /dev/null ; then
3172        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3173        umount $mtpt
3174    fi
3175done
3176
3177#
3178# If we have a USB device we need to store info
3179# and remove it from the parameters line
3180#
3181if [ "$#" -ne "0" ] ; then
3182    if [ "$1" = "--usb" ] ; then
3183        shift
3184        USBDEVICE=$1
3185        if [ _"$USBDEVICE" = _"" ]; then
3186            Die "No USB device specified"
3187        fi
3188        shift
3189    fi
3190fi
3191
3192if [ "$#" -ne "0" ] ; then
3193    if [ "$1" = "--findkernel" ] ; then
3194        resk=`TryToFindKernelPath`
3195        # Avoids logfile content for mondo
3196        export MONDO_SHARE=""
3197        if [ "$resk" = "" ] ; then
3198            if [ $KERNEL_IS_XEN = "yes" ]; then
3199                echo "$xenkernelpath"
3200                LogFile "INFO: xenkernelpath = $xenkernelpath"
3201                MindiExit 0
3202            else
3203                MindiExit -1
3204            fi
3205        else
3206            echo "$resk"
3207            LogFile "INFO: kernelpath = $resk"
3208            MindiExit 0
3209        fi
3210    elif [ "$1" = "--locatedeps" ] ; then
3211        [ ! "$2" ] && Die "Please specify the binary to look at"
3212        LocateDeps $*
3213        # Avoids logfile content for mondo
3214        export MONDO_SHARE=""
3215        MindiExit $?
3216    elif [ "$1" = "--readalllink" ] ; then
3217        [ ! "$2" ] && Die "Please specify the binary to look at"
3218        # Avoids logfile content for mondo
3219        export MONDO_SHARE=""
3220        mr-read-all-link $2
3221        MindiExit $?
3222    elif [ "$1" = "--makemessage" ] ; then
3223        MakeMessageFile | cut -c1-80
3224        MindiExit 0
3225    elif [ "$1" = "--makemountlist" ] ; then
3226        [ ! "$2" ] && Die "Please specify the output file"
3227        MakeMountlist $2
3228        CheckMountlist $2
3229        # Avoids logfile content for mondo
3230        export MONDO_SHARE=""
3231        MindiExit $?
3232    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3233        echo "Mindi v$MINDI_VERSION"
3234        # Avoids logfile content for mondo
3235        export MONDO_SHARE=""
3236        MindiExit 0
3237    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3238        MONDO_TMP=$2
3239        # Change MINDI_TMP for the one provided by mondo
3240        # So that it can get back the built files
3241        if [ _"$MONDO_TMP" = _"" ]; then
3242            Die "MONDO_TMP is empty, aborting"
3243        fi
3244        if [ _"$MONDO_TMP" = _"/" ]; then
3245            Die "MONDO_TMP is /, aborting"
3246        fi
3247        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3248        rmdir $MINDI_TMP
3249        export MINDI_TMP=$MONDO_TMP
3250        mkdir -p $MINDI_TMP
3251
3252        # This is the scratch dir in mondo - subdir images
3253        MINDI_CACHE=$3
3254        LogFile "MINDI_CACHE = $MINDI_CACHE"
3255
3256        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3257        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3258       
3259###
3260### Sq-Modification...
3261### Attempt to locate kernel specific module path
3262### if module path is found then use it other wise use uname -r to set it...
3263###
3264        if [ $KERNEL_IS_XEN = "yes" ]; then
3265            LogAll "INFO: xenkernelpath = $xenkernelpath"
3266        fi
3267        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3268        if [ ! -d "/lib/modules/$kernelname" ]; then
3269           LogAll "WARNING: Module path for ${kernelpath} not found..."
3270           LogAll "         using running kernel\'s modules."
3271           kernelname=$KERVERRUN
3272        else
3273           LogAll "INFO: Using modules for kernel: ${kernelname}"
3274        fi
3275        LogAll "INFO: kernelname = $kernelname"
3276        LogAll "INFO: kernelpath = $kernelpath"
3277###
3278### end of Sq-Modification
3279###
3280        TAPEDEV=$5
3281        TAPESIZE=$6
3282        FILES_IN_FILELIST=$7
3283        USE_LZO=$8
3284        CDRECOVERY=$9
3285        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3286            IMAGE_DEVS=""
3287        else
3288            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3289        fi
3290        if [ "${11}" ] ; then
3291            LILO_OPTIONS=""
3292    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3293        fi
3294        LAST_FILELIST_NUMBER=${12}
3295        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3296        export MINDI_EXCLUDE_DEVS="${14}"
3297        USE_COMP="${15}"
3298        USE_LILO="${16}"
3299        USE_STAR="${17}"
3300        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3301        DIFFERENTIAL="${19}"
3302        USE_GZIP="${20}"
3303        USE_LZMA="${21}"
3304        NOT_BOOT="${22}"
3305        BOOT_TYPE="${23}"
3306        [ "$USE_COMP" = "" ] && USE_COMP=yes
3307        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3308        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3309        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3310        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3311        # MONDO_ROOT is the real scratchdir
3312        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3313        if [ _"$MONDO_ROOT" != _"" ]; then
3314            mkdir -p $MONDO_ROOT
3315        else
3316            Die "MONDO_ROOT is undefined"
3317        fi
3318    else
3319        LogScreen "Syntax: mindi (--custom ....)"
3320        MindiExit -1
3321    fi
3322fi
3323
3324if [ _"$MINDI_CACHE" != _"" ]; then
3325    rm -rf $MINDI_CACHE/* 2> /dev/null
3326    mkdir -p $MINDI_CACHE
3327fi
3328
3329[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3330
3331if [ _"$MONDO_SHARE" = _"" ]; then
3332    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3333    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3334    LogIt "BusyBox sources are available from http://www.busybox.net"
3335    LogIt "------------------------------------------------------------------------------"
3336else
3337    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3338fi
3339if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3340    LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3341else
3342    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3343    MindiExit -1
3344fi
3345
3346for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3347    modinfo $i 2> /dev/null 1> /dev/null
3348    if [ $? -eq 0 ]; then
3349        modprobe $i 2>&1 > /dev/null
3350    fi
3351done
3352
3353LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3354LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3355LogFile "NOT_BOOT = '$NOT_BOOT'"
3356if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3357    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3358    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3359    MakeMountlist $MINDI_TMP/mountlist.txt
3360    CheckMountlist $MINDI_TMP/mountlist.txt
3361    mkdir -p $MINDI_TMP/small-all/tmp
3362    cd "$MINDI_TMP/small-all"
3363    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3364    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3365    sleep 2
3366    LogIt "Done. Exiting."
3367    MindiExit 0
3368fi
3369
3370if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3371    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3372fi
3373
3374if [ "$kernelpath" = "" ] ; then
3375    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3376    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3377    read ch
3378    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3379        USE_OWN_KERNEL="yes"
3380    else
3381        USE_OWN_KERNEL="no"
3382    fi
3383    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3384        kernelpath=`TryToFindKernelPath`
3385        if [ "$kernelpath" = "" ] ; then
3386            echo -n "Please enter kernel path : "
3387            read kernelpath
3388        fi
3389    fi
3390fi
3391
3392echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3393[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3394
3395mountpoint=$MINDI_TMP/mountpoint.$$
3396PrepareDataDiskImages
3397
3398export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3399
3400LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3401PrepareBootDiskImage $kernelpath || Die "Failed to create boot disk image."
3402
3403[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3404...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3405
3406if [ _"$MONDO_SHARE" = _"" ]; then
3407    ListImagesForUser
3408    OfferToMakeBootableISO
3409    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3410        OfferToMakeBootableUSB
3411    fi
3412    LogAll "Finished."
3413elif [ "$TAPEDEV" ] ; then
3414    if [ "$ARCH" != "ia64" ] ; then
3415        # We need to keep the img file as boot file for ia64 platform
3416        rm -f $MINDI_CACHE/{*img,*iso}
3417    else
3418        rm -f $MINDI_CACHE/*iso
3419    fi
3420    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3421        OfferToMakeBootableUSB
3422    fi
3423    OfferToMakeBootableISO
3424    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3425        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3426    else
3427        Die "Cannot find all.tar.gz, to be written to tape"
3428    fi
3429elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3430    OfferToMakeBootableUSB
3431else
3432    OfferToMakeBootableISO
3433fi
3434
3435if [ -f $MINDI_TMP/$MRCFG ]; then
3436    LogFile "INFO: Your $MRCFG file is:"
3437    LogFile "--------------------------"
3438    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3439    LogFile "--------------------------"
3440else
3441    if [ _"$MONDO_SHARE" != _"" ] ; then
3442        LogIt "ERROR: You don't have a $MRCFG file !"
3443    fi
3444fi
3445# cleanup
3446LogAll "INFO: $FRIENDLY_OUTSTRING"
3447for mtpt in $FLOPPY_WAS_MOUNTED ; do
3448    mount $mtpt
3449done
3450MindiExit 0
Note: See TracBrowser for help on using the repository browser.