source: branches/3.2/mindi/mindi @ 3479

Last change on this file since 3479 was 3479, checked in by Bruno Cornec, 4 years ago
  • Adds " around file tests with -e in mindi
  • Move ldlinux detection earlier in order to integrate it in EFI/BOOT for UEFI mode
  • in UEFI mode force GPT label on boot file (requires parted)
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 122.5 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3479 2015-10-16 10:14:52Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000      # increase if you run out of ramdisk space
44BOOT_SIZE=86000         # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47    # Ask if you want to make a CD Image to be written?
48    # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51    # Ask if you want to make a USB Image to be written?
52    # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55    # If set to "no", you will be prompted for whether or not
56    # you want to use your own kernel, or the supplied default.
57    # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60    # If set to "no", the kernel is not a Xen kernel
61    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63 
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80LOGFILE=/var/log/mindi.log
81BOOT_MEDIA_MESSAGE="\
82To format and restore all files automatically, type '0enuke07' <enter>.\n\
83To restore some/all files interactively, type '0einteractive07' <enter>.\n\
84To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
85To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
86\n\
87You may add one or more parameters as well as per the function keys below\n\
88e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
89\n\
90If restoring from a local external disk or USB key, do not connect it \n\
91until the boot-up has finished.\n\
92\n\
93\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
94"
95FDISK=$MINDI_SBIN/mr-parted2fdisk
96
97# Using a config file allow to overwrite some values
98MINDI_CONFIG="$MINDI_CONF/mindi.conf"
99if [ -f $MINDI_CONFIG ]; then
100    . $MINDI_CONFIG
101fi
102DEPLIST_FILE="$MINDI_CONF/deplist.txt"
103DEPLIST_DIR="$MINDI_CONF/deplist.d"
104
105ISO_CMD="/usr/bin/mkisofs"
106ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
107
108# Mindi set this as default in case it's invoked alone
109BOOT_TYPE="BIOS"
110# and we also check whether we're UEFI or not.
111if [ -d "/sys/firmware/efi" ]; then
112    BOOT_TYPE="UEFI"
113    ISO_OPT="$ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
114else
115    # Find MBR in case of bootable USB device to build
116    MBRFILE=/usr/lib/syslinux/mbr.bin
117    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
118    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
119    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
120    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
121fi
122
123# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
124# However, they use exactly the same command line parameters, so just
125# use genisoimage if it's available.
126if [ ! -x $ISO_CMD ]; then
127    ISO_CMD=/usr/bin/genisoimage
128fi
129
130
131# Function to log on screen only
132LogScreen() {
133        if [ -e /dev/stderr ] ; then
134        echo -e "$1" >> /dev/stderr
135    elif [ -e /usr/bin/logger ] ; then
136        /usr/bin/logger -s $1
137    fi
138}
139
140# Function to log in log file only
141LogFile() {
142
143    echo -e "$1" >> $LOGFILE
144    if [ _"$2" != _"" ]; then
145        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
146        rm -f "$2"
147    fi
148}
149
150# Function to log in both screen and logfile
151LogAll() {
152    LogScreen "$1"
153    LogFile "$1" "$2"
154}
155
156# Preserved for compatibility
157LogIt() {
158    LogAll "$1" "$2"
159}
160
161# Last function called before exiting
162# Parameter is exit code value
163# Should be declared here as used immediately below potentialy
164MindiExit() {
165    LogFile "Mindi $MINDI_VERSION is exiting" 
166    LogFile "End date : `date`" 
167    if [ _"$MONDO_SHARE" != _"" ] ; then
168        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
169        if [ -f $LOGFILE ]; then
170            cat $LOGFILE >> /var/log/mondoarchive.log
171        else
172            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
173        fi
174        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
175    fi
176
177    cd /
178    sync&
179
180    # Clean temporary files only when standalone mindi
181    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
182        rm -Rf $MINDI_TMP
183    fi
184    exit $1
185}
186
187Die() {
188    local i
189    if [ "$1" = "" ] ; then
190        LogAll "FATAL ERROR"
191    else
192        LogAll "FATAL ERROR. $1"
193    fi
194    if [ _"$2" != _"" ]; then
195        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
196    fi
197    rm -f "$2"
198
199    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
200    LogAll "See http://www.mondorescue.org for more information."
201    LogAll "WE CANNOT HELP unless you enclose that file.\n"
202    MindiExit -1
203}
204
205# Now we can create what we need
206MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
207if [ $? -ne 0 ]; then
208    df $TMPDIR
209    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
210fi
211if [ _"$MINDI_TMP" = _"" ]; then
212    Die "MINDI_TMP is empty, aborting"
213fi
214if [ _"$MINDI_TMP" = _"/" ]; then
215    Die "MINDI_TMP is /, aborting"
216fi
217export MINDI_TMP
218
219# ----------------------------------------------------------------------------
220
221
222AbortHere() {
223    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
224    Die "Program is terminating in response to signal received from OS/user"
225}
226
227
228Aborted() {
229    trap SIGHUP SIGTERM SIGTRAP SIGINT
230    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
231    Die "User abort."
232}
233
234
235AddFileToCfgIfExists() {
236    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
237}
238
239
240AddKeyboardMappingFile() {
241    local mappath r included_list included_item i res ii sss
242    mappath=$1
243    KBDEPTH=$(($KBDEPTH+1))
244    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
245    if [ -e "$bigdir/$mappath" ] ; then
246        LogFile "INFO: $mappath already added"
247        return
248    elif [ -d "$bigdir/$mappath" ] ; then
249        echo "Cannot add $mappath: it's a directory. Sorry."
250        return
251    fi
252    LogFile "INFO: Added kbd map $mappath"
253    if [ ! -e "$mappath" ] ; then
254        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
255        if [ ! -e "$mappath" ] ; then
256            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
257            return
258        fi
259    else
260        echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
261    fi
262
263    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
264    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
265        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
266    else
267        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
268    fi
269    for included_item in $included_list ; do
270        if [ ! -e "$included_item" ] ; then
271            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
272            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
273            for ii in $sss ; do
274                [ -e "$ii" ] && AddKeyboardMappingFile $ii
275            done
276        else
277            AddKeyboardMappingFile $included_item
278        fi
279    done
280}
281
282
283CopyDependenciesToDirectory() {
284    local outdir incoming counter d found tdir templog
285    outdir=$1
286    templog=$MINDI_TMP/$$.log
287    mkdir -p $outdir
288    incoming=`ReadLine`
289    counter=0
290    > $templog
291
292    while [ "$incoming" != "" ] ; do
293        # Non absolute file names should not arrive till here => skipped
294        if [ `echo "$incoming" | cut -c1` != '/' ]; then
295            LogAll "WARNING: Unable to handle $incoming"
296            incoming=`ReadLine`
297            continue
298        fi
299        # no parent directory of incoming should be a link, copy is not possible in that case
300        d=`dirname "$incoming"`
301        found="false"
302        while [ $d != "/" -a $found = "false" ]; do
303            [ -h "$d" ] && found="true"
304            d=`dirname "$d"`
305        done
306        if [ -d "$incoming" -a ! -h "$incoming" ]; then
307            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
308        elif [ -e "$incoming" ] && [ $found = "false" ]; then
309            if [ ! -h "$incoming" ]; then
310                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
311            else
312                tdir=`dirname "$incoming"`
313                if [ ! -e "$outdir/$tdir" ]; then
314                    mkdir -p "$outdir/$tdir"
315                fi
316                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
317            fi
318            # Only uncompress modules if not using udevd
319            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
320                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
321            fi
322            [ -x "$outdir" ] && StripExecutable $outdir
323            counter=$(($counter+1))
324            LogProgress $counter $2
325        fi
326        incoming=`ReadLine`
327    done
328}
329
330
331CountItemsIn() {
332    local r
333    r=0
334    for q in $1 ; do
335        r=$(($r+1))
336    done
337    echo $r
338}
339
340
341DropOptimizedLibraries() {
342    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
343    filelist=$1
344    outdir=$2
345
346    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
347    if [ "$list_of_optimized_libraries" = "" ] ; then
348        return 0
349    fi
350    echo -en "Dropping i686-optimized libraries if appropriate"
351    for optimized_lib_name in $list_of_optimized_libraries ; do
352        echo -en "."
353        reason=""
354        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355        echo "$vanilla_lib_name" >> $filelist
356        LogFile "INFO: Adding $vanilla_lib_name to filelist"
357        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
358        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
359
360        # This may return multiple files
361        for resolved in `mr-read-all-link $vanilla_lib_name`; do
362            LogFile "INFO: Adding as deps $resolved to filelist"
363            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
364            if [ "$vanilla_resolved_name" != "$resolved" ]; then
365                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
366                rmdir $outdir$resolved > /dev/null 2> /dev/null
367                ln -sf $vanilla_resolved_name $outdir$resolved
368                LogFile "INFO: Excluding deps $resolved" 
369                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
370                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
371                echo "$vanilla_resolved_name" >> $filelist.tmp
372                mv -f $filelist.tmp $filelist
373            fi
374        done
375    done
376    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
377    mv -f $filelist.tmp $filelist
378    echo -e "$DONE"
379}
380
381
382FindAndAddUserKeyboardMappingFile() {
383    local r res mapfile mappath included_item included_list keyfile mp locale
384    LogAll "INFO: Analyzing your keyboard's configuration."
385    KEYDIR=/usr/lib/kbd
386    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
387    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
388    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
389    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
390    if [ ! -e "$KEYDIR" ] ; then
391        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
392        return 0
393    fi
394    if [ -e "/etc/sysconfig/keyboard" ] ; then
395        LogFile "INFO: Red Hat-style config detected."
396        keyfile=/etc/sysconfig/keyboard
397    elif [ -e "/etc/vconsole.conf" ] ; then
398        LogFile "INFO: New Fedora style config detected."
399        keyfile=/etc/vconsole.conf
400    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
401        LogFile "INFO: Slackware-style config detected."
402        keyfile=/etc/rc.d/rc.keymap
403    elif [ -e "/etc/rc.config" ] ; then
404        LogFile "INFO: Debian-style config detected."
405        keyfile=/etc/rc.config
406    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
407        LogFile "INFO: Debian-style config detected."
408        mkdir -p $bigdir/tmp
409        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
410        KBDEPTH=0
411        mkdir -p $bigdir/etc/console
412        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
413        echo ""
414        echo -e "$DONE"
415        return 0
416    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
417        LogFile "INFO: Ubuntu-style config detected."
418        mkdir -p $bigdir/tmp
419        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
420            kbdfile="/etc/console-setup/boottime.kmap.gz"
421        else
422            kbdfile="/etc/console-setup/cached.kmap.gz"
423        fi
424        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
425        KBDEPTH=0
426        mkdir -p $bigdir/etc/console-setup
427        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
428        echo ""
429        echo -e "$DONE"
430        return 0
431    elif [ -e "/etc/rc.conf" ] ; then
432        LogFile "INFO: ArchLinux config detected."
433        keyfile=/etc/rc.conf
434    elif [ -e "/etc/conf.d/keymaps" ] ; then
435        LogFile "INFO: Gentoo-style config detected."
436        keyfile=/etc/conf.d/keymaps
437    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
438        LogFile "INFO: X11-style config detected."
439        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
440    else
441        LogFile "Searching for rc.config ..."
442        keyfile=`find /etc -name rc.config | head -n1`
443        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
444            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
445            return
446        else
447            LogFile "INFO: Found $keyfile"
448        fi
449    fi
450    if [ ! -e "$KEYDIR/keymaps" ] ; then
451        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
452        return
453    fi
454    LogFile "INFO: keyfile=$keyfile"
455    # For SLES we need to remove the .map.gz extension Cf #614
456    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
457    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
458    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
459    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
460    LogFile "INFO: locale=$locale"
461    #
462    # Process the keymaps dir once for all
463    # AddKeyboardMappingFile will use it recursively
464    #
465    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
466    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
467    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
468    # If we have multiple keymaps then log it !!
469    echo "$mp" | grep -q " " >> $LOGFILE
470    if [ $? -eq 0 ]; then
471        LogAll "WARNING: Multiple keymaps found: $mp"
472        LogFile "INFO: The following one will be used"
473    fi
474    for i in $mp ; do
475        mappath=$i
476        [ -e "$i" ] && [ ! -d "$i" ] && break
477    done
478    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
479        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
480    fi
481    LogFile "INFO: mappath = $mappath"
482    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
483        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
484        return
485    fi
486    LogAll "INFO: Adding the following keyboard mapping tables: "
487    mkdir -p $bigdir/tmp
488    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
489    KBDEPTH=0
490    AddKeyboardMappingFile $mappath
491    echo ""
492    echo -e "$DONE"
493    rm -f $MINDI_TMP/keymaps.find
494    return 0
495}
496
497
498FindLdlinux32Binary() {
499    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
500    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
501    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
502    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
503    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
504    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
505    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
506    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
507    if [ ! -e "$LDLINUXC32" ]; then 
508        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
509        LDLINUXC32=/tmp/idoesnthopefullyexist
510    else
511        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
512    fi
513}
514
515
516FindMboot32Binary() {
517    MBOOTC32=/usr/lib/syslinux/mboot.c32
518    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
519    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
520    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
521    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
522    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
523    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
524    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
525    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
526    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
527}
528
529FindLdlinuxe64Binary() {
530    LDLINUXE64=/usr/share/syslinux/efi64/ldlinux.e64
531    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/efi64/ldlinux.e64
532    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib/syslinux/efi64/ldlinux.e64
533    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/share/lib64/syslinux/efi64/ldlinux.e64
534    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib/syslinux/modules/efi64/ldlinux.e64
535    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=/usr/lib64/syslinux/modules/efi64/ldlinux.e64
536    [ ! -e "$LDLINUXE64" ] && LDLINUXE64=`find / -name ldlinux.e64 | grep -x "/.*/ldlinux.e64"`
537    [ ! -e "$LDLINUXE64" ] && Die "Please install ldlinux.e64 first. If your syslinux RPM doesn't include ldlinux.e64, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
538    LogFile "INFO: Found ldlinux.e64 at $LDLINUXE64"
539}
540
541FindSyslinux64EFI() {
542    SYSLINUX64EFI=/usr/share/syslinux/efi64/syslinux.efi
543    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/syslinux/efi64/syslinux.efi
544    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib64/syslinux/efi64/syslinux.efi
545    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/syslinux/syslinux.efi
546    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/share/lib64/syslinux/efi64/syslinux.efi
547    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=/usr/lib/SYSLINUX/efi64/syslinux.efi
548    [ ! -e "$SYSLINUX64EFI" ] && SYSLINUX64EFI=`find / -name syslinux.efi | grep -x "/.*64/syslinux.efi"`
549    [ ! -e "$SYSLINUX64EFI" ] && Die "Please install syslinux first. If your syslinux RPM doesn't include syslinux, you may download an syslinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
550    LogFile "INFO: Found syslinux.efi at $SYSLINUX64EFI"
551}
552
553FindIsolinuxBinary() {
554    ISOLINUX=/usr/lib/isolinux.bin
555    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
556    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
557    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
558    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
559    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
560    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
561    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
562    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
563    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
564}
565
566
567GenerateGiantDependencyList() {
568    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
569
570    echo -en "Analyzing dependency requirements"
571    outfile=$1
572    tempfile=$MINDI_TMP/$$.txt
573    incoming=`ReadLine`
574
575    > $tempfile
576    progress=0
577    res=0
578    noof_lines=$2
579    while [ "$incoming" != "" ] ; do
580        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
581            incoming=`ReadLine`
582            continue
583        fi
584        if [ "$incoming" = "LVMFILES:" ] ; then
585            break
586        fi
587        filelist=`GenerateListForFile "$incoming"`
588        r=$?
589        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
590        res=$(($res+$r))
591#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
592        for fname in $filelist ; do
593            [ "$fname" != "" ] && echo "$fname" >> $tempfile
594        done
595        progress=$(($progress+1))
596        LogProgress $progress $noof_lines
597        incoming=`ReadLine`
598    done
599    if  [ "$incoming" = "LVMFILES:" ] ; then
600        incoming=`ReadLine`
601        lvmversion=""
602        while [ "$incoming" != "" ] ; do
603            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
604                incoming=`ReadLine`
605                continue
606            fi
607            filelist=`GenerateListForFile "$incoming"`
608            for tool in $filelist ; do
609                lvmresolved=`readlink -f $tool`
610                if [ "$tool" = "$lvmresolved" ]; then
611                    echo "$tool" >> $tempfile
612                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
613                    if [ "$lvmversion" = "" ] ; then
614                        lvmversion=`$lvmresolved`
615                        echo "$lvmresolved" >> $tempfile
616                    fi
617                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
618                    if [ "$lvmversion" = "200" ]; then
619                        # pvdata and lvmcreate_initrd don't exist in LVM2
620                        case "$toolstripped" in
621                        "pvdata")
622                            continue
623                            ;;
624                        "lvmcreate_initrd")
625                            continue
626                            ;;
627                        esac
628                    fi
629                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
630                    if [ -e "$toolpath" ] ; then
631                        echo "$toolpath" >> $tempfile
632                        echo "$tool" >> $tempfile
633                    else
634                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
635                    fi
636                    if [ -e "$toolpath" ] ; then
637                        echo "$toolpath" >> $tempfile
638                        echo "$tool" >> $tempfile
639                    else
640                        echo "Where are your LVM-Tools? Couldn't find $tool"
641                    fi
642                else
643                    echo "$tool" >> $tempfile
644                fi
645            done
646            progress=$(($progress+1))
647            LogProgress $progress $noof_lines
648            incoming=`ReadLine`
649        done
650    fi
651    echo -en "$DONE\nMaking complete dependency list"
652
653    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
654    mv -f $tempfile.new $tempfile
655    > $outfile.pre
656    progress=0
657    noof_lines=`cat $tempfile | wc -l`
658    LogFile "---------------------------------"
659    LogFile "List of dependencies:             "
660    LogFile "---------------------------------"
661    for fname in `cat $tempfile` ; do
662        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
663        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
664        progress=$(($progress+1))
665        LogProgress $progress $noof_lines
666    done
667    if [ _"$MONDO_SHARE" != _"" ]; then
668        mkdir -p $bigdir/tmp
669        mkdir -p $bigdir/usr/bin
670        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
671            LogAll "\nINFO: Incorporating post-nuke tarball"
672            old_pwd=`pwd`
673            cd "$bigdir"
674            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
675            cd "$old_pwd"
676        fi
677        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
678            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
679        else
680            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
681            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
682            LogIt "       If Mindi was called by Mondo then send a bug report."
683            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
684            LogIt "       Finally, run Mindi again."
685            Die "Odd."
686        fi
687        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
688        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
689            LogAll "\nINFO: Incorporating Network-related settings"
690            for r in NETFS-* ; do
691                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
692                LogFile "INFO: Copying $r to ramdisk"
693            done
694        fi
695    fi
696    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
697    rm -f $tempfile $outfile.pre
698    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
699    return $res
700}
701
702
703GenerateListForFile() {
704    local files_found loc fname incoming i res
705    incoming="$1"
706    files_found=""
707    res=0
708
709    for fname in $incoming ; do
710        files_found="$files_found `LocateFile $fname`"
711    done
712
713    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
714}
715
716
717# Returns all disk devices which are part of a raid array
718GetAllRaidMembers() {
719    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
720}
721
722
723GetFileSizeList() {
724    local i
725    for i in `find $1 -type d -o -print` ; do
726        du -sk $i
727    done
728}
729
730
731# Check kernel filesystem capabilites for accessing initrd image
732# Could be ext2 FS (old mode) or initramfs (new mode)
733#
734# Interface definition:
735# param #1: absolute path to kernel image
736GetInitrdFilesystemToUse() {
737
738    # interface test: make sure we have one parameter
739    if [ $# -ne 1 ]; then
740        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
741    fi
742
743    # interface parameters
744    local lvKernelImage=$1
745
746    # local constants (filesystem magic strings)
747    local lcMagicCramfs="<3>cramfs: wrong magic"
748    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
749    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
750    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
751
752    # local variables
753    local lvOffset
754    local lvScanRes
755    local lvUseFilesystem
756
757    # say where we are.
758    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
759
760    # verify that file exists
761    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
762
763    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
764    file $lvKernelImage 2>&1 | grep -q gzip
765    if [ $? -eq 0 ]; then
766        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
767        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
768    else
769        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
770        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
771        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
772        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
773        if [ $lvOffset -eq 0 ]; then
774            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
775            lvScanRes=$lcMagicInitfs
776        else
777            lvOffset=`expr $lvOffset / 2`
778            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
779            # scan again  kernel image
780            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
781        fi
782    fi
783
784    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
785    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
786        lvUseFilesystem="ext2fs"
787    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
788        lvUseFilesystem="ext3fs"
789    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
790        lvUseFilesystem="initramfs"
791    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
792        lvUseFilesystem="cramfs"
793    else
794        # In that case, we are most probably after 2.6.30 and use the supported initramfs
795        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
796        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
797        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
798        lvUseFilesystem="initramfs"
799    fi
800
801    # say what we are using
802    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
803
804    # return file system to use
805    echo "$lvUseFilesystem"
806
807}
808
809# Searches members of raid device
810# $1: raid device (/dev/md...)
811GetRaidDevMembers() {
812    if [ ! -f /etc/raidtab ]; then 
813        return
814    fi
815    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
816}
817
818
819ListAllPartitions() {
820    local res currline partition all_partitions ap_orig remaining i j
821
822    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
823    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
824    if [ -e "/vmfs/volumes" ]; then
825        # For VMWare ESX 3 get the device names of these volumes
826        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
827    fi
828    return
829}
830
831
832ListImagesForUser() {
833    local path fname
834    path=$MINDI_CACHE
835    echo -en "In the directory '$path' you will find the images:-\n"
836    for fname in `ls $path | grep -F mindi-` ; do
837        printf "%19s " $fname
838    done
839    echo " "
840}
841
842
843ListKernelModulePaths() {
844    local module_list module fname r kern
845    module_list="$MODULES"
846    # Remove unwanted modules from list
847    for i in $DENY_MODS; do
848        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
849    done
850###
851### Sq-Modification ... Use kernelname for module search path if specified
852###
853    if [ "${kernelname}" != "" ]
854    then
855        kern=${kernelname}
856    else
857        kern="$KERVERRUN"
858    fi
859    export KERVER=$kern
860###
861### Sq-Mod End
862###
863    # Get rid of duplicates
864    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
865        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
866        if [ -z "$r" ]; then
867            if [ "`echo "$MODULES" | grep -w $module`" ]; then
868                r="[live module file not found]"
869            else
870                r="[extra module file not found]"
871            fi
872        else
873            [ -f "$r" ] && echo "$r"
874        fi
875        LogFile "INFO: module $module --> $r"
876    done
877    find /lib/modules/$kern/modules.* -type f 2> /dev/null
878}
879
880#
881# Critical function which computes all dependencies (dyn. lib.)
882# for a list of binaries
883#
884LocateDeps() {
885    local incoming fname deps
886    incoming="$*"
887    deps=""
888
889    for fname in $incoming ; do
890        if [ ! -e "$fname" ] ; then
891            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
892            if echo $fname | grep lvm &> /dev/null ; then
893                LogFile "          This warning only affects you if you are using LVM."
894                if echo "$MODULES" | grep lvm &> /dev/null ; then
895                    LogFile "          I think you are, so please take heed!"
896                else
897                    LogFile "          I don't think you are, so don't worry about it."
898                fi
899            fi
900        else
901            deps="$deps $fname" 
902        fi
903    done
904    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
905}
906
907
908LocateFile() {
909    local i j path fname_to_find location output resolved tmp stub cache_id loclist
910    fname_to_find="$1"
911    # It's an absolute path
912    j=`echo "$fname_to_find" | cut -c1`
913    if [ _"$j" = _"/" ]; then
914        dn=`dirname $fname_to_find`
915        # We suppose that the link is already included, just add the new file
916        if [ -h "$dn" ]; then
917            newdn=`readlink -f $dn`
918            bn=`basename $fname_to_find`
919            output="$newdn/$bn"
920        else
921            output="$fname_to_find"
922        fi
923        if [ -h "$output" ] ; then
924            output="`mr-read-all-link $output` $output"
925        fi
926        echo "$output"
927        return 0
928    fi
929    # It's not an absolute path
930    output=""
931    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
932    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
933        [ -h "$path" ] && continue
934        [ ! -e "$path/$fname_to_find" ] && continue
935        output="$path/$fname_to_find $output"
936        if [ -h "$path/$fname_to_find" ] ; then
937            output="`mr-read-all-link $path/$fname_to_find` $output"
938        fi
939    done
940    if [ "$output" = "" ] ; then
941        return 1
942    fi
943    echo "$output"
944    return 0
945}
946
947LogProgress() {
948    local i progress modres noof_lines title
949 
950    progress=$1
951    noof_lines=$2
952    title=$3
953
954    i=$(($progress*100))
955    if [ $noof_lines -ne 0 ]; then
956        i=$(($i/$noof_lines))
957    else
958        i=0
959    fi
960
961    if [ _"$MONDO_SHARE" != _"" ]; then 
962        echo "$title        $i%"
963    else
964        echo -en "\r\t\t\t\t\t\t\t\t"
965        echo -en "$i"
966        echo -en "%"
967        modres=$(($progress%4))
968        [ "$modres" -eq "0" ] && echo -en "\t/"
969        [ "$modres" -eq "1" ] && echo -en "\t-"
970        [ "$modres" -eq "2" ] && echo -en "\t\\"
971        [ "$modres" -eq "3" ] && echo -en "\t|"
972    fi
973}
974
975# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
976MakeMondoConfigFile() {
977    local outfile use_lzo use_comp use_star
978    outfile=$1
979    > $outfile
980    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
981    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
982    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
983    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
984    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
985    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
986    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
987    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
988    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
989    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
990    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
991    echo "use-lzo $use_lzo" >> $outfile
992    echo "use-gzip $use_gzip" >> $outfile
993    echo "use-star $use_star" >> $outfile
994    echo "use-lzma $use_lzma" >> $outfile
995    echo "use-comp $use_comp" >> $outfile
996    echo "boot-type $BOOT_TYPE" >> $outfile
997    echo "datestamp `date`" >> $outfile
998    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
999    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
1012
1013    # Deal with network configuration in a portable way
1014    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
1015        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
1016    fi
1017}
1018
1019# Get PV's for an LV
1020GetPVsForLV() {
1021    if [ -n "$1" ]; then
1022        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1023        if [ -z "$vg" ]; then
1024            return
1025        fi
1026        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1027    fi
1028}
1029
1030
1031MakeMountlist() {
1032    local mountlist all_partitions current_partition \
1033partition_size partition_format outstring partition_number \
1034partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1035absolute_partition old_partition_fmt current_lvolume uname skip
1036
1037    LogFile "------------------------------------"
1038    LogFile "Your raw fstab file looks like this:"
1039    LogFile "------------------------------------"
1040    cat $MY_FSTAB >> $LOGFILE
1041    LogAll "-----------------------------------"
1042    LogAll "Your mountlist will look like this:"
1043    LogAll "-----------------------------------"
1044
1045# mountlist(OUT)
1046    mountlist=$1
1047
1048# NB: partition = device
1049# NB: mountpt = where the device is mounted
1050
1051    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1052
1053    [ "$mountlist" != "" ] && rm -Rf $mountlist
1054    > $mountlist
1055    all_partitions=""
1056   
1057    if [ $LVM != "false" ]; then
1058        LogAll "INFO: Analyzing LVM..."
1059        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1060        if [ $? -ne 0 ]; then
1061            LVM="false"
1062        fi
1063        # Excluded LVs and GVs are not reported here
1064        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1065    fi
1066    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1067    for i in $IMAGE_DEVS ; do
1068        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1069    done
1070    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1071    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1072    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1073    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1074    for c_p in $all_partitions ; do
1075        # Skip fd/cd devices, network FS, cifs
1076        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1077        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1078        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1079            current_partition=`readlink -f $c_p`
1080            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1081                current_partition="$c_p"
1082            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1083                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1084                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1085            fi
1086            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1087        else
1088            current_partition="$c_p"
1089        fi
1090        [ "$c_p" = "none" ] && continue
1091        redhat_label=""
1092        label=""
1093        uuid=""
1094        absolute_partition=`readlink -f $c_p`
1095        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1096
1097        # set default in case we dont't find it
1098        str_to_find_fmt_with=$current_partition
1099
1100        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1101        # current_partition contains only first column of /etc/fstab
1102        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1103            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1104            actual_dev=""
1105
1106            # 1st try, findfs - the RHEL way of finding labels and their partitions
1107            if [ -x "/sbin/findfs" ]; then
1108                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1109            fi
1110   
1111            # 2nd try : blkid, the good way for all LABEL except swap
1112            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1113                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1114                # For LVM FS it will give a /dev/dm-# which should then be converted
1115                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1116                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1117                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1118                    for dev in `ls /dev/mapper/*`; do
1119                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1120                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1121                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1122                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1123                            break
1124                        fi
1125                    done
1126                fi
1127            fi
1128   
1129            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1130            # For LVM gives a /dev/mapper entry
1131            if [ "x$actual_dev" = "x" ]; then
1132                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1133            fi
1134   
1135            # 4th try, with vol_id
1136            # SWAP only
1137            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1138                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1139                for dev_swap in $list_swaps ; do
1140                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1141                    if [ "x$dev_exists" != "x" ]; then
1142                        actual_dev=$dev_swap
1143                        break;
1144                    fi
1145                done
1146            fi
1147
1148            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1149            # LABEL=SW-cciss/c0d0p3 (RDP)
1150            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1151            # SWAP only
1152            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1153                    skip=""
1154                    uname=$KERVERRUN
1155                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1156                    # 2.6.12 needs 16 (FC3)
1157                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1158                    # 2.6.19 and upper needs 1052
1159                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1160                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1161                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1162                    if [ $skip = "" ]; then
1163                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1164                    fi
1165                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1166                    do
1167                        # Location of the swap label for kernel 2.6
1168                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1169                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1170                            actual_dev=$try_dev
1171                        fi
1172                    done
1173            fi
1174
1175            # Check if one of all those tries has known success
1176            if [ "x$actual_dev" != "x" ]; then
1177                current_partition=$actual_dev
1178            else
1179                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1180            fi
1181        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1182        # current_partition contains only first column of /etc/fstab
1183        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1184            uuid=`echo "$current_partition" | cut -d'=' -f2`
1185            actual_dev=""
1186
1187            # 1st try, findfs - the RHEL way of finding labels and their partitions
1188            if [ -x "/sbin/findfs" ]; then
1189                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1190            fi
1191   
1192            # 2nd try : blkid, the good way for all UUID except swap
1193            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1194                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1195                # For LVM FS it will give a /dev/dm-# which should then be converted
1196                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1197                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1198                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1199                    for dev in `ls /dev/mapper/*`; do
1200                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1201                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1202                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1203                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1204                            break
1205                        fi
1206                    done
1207                fi
1208            fi
1209   
1210            # 3th try, with vol_id
1211            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1212                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1213                for dev in $list_dev ; do
1214                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1215                    if [ "x$dev_exists" != "x" ]; then
1216                        actual_dev=$dev
1217                        break;
1218                    fi
1219                done
1220            fi
1221
1222            # 4th try, with dumpuuid (VMWare only ?) for swap
1223            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1224                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1225                for dev in $list_dev ; do
1226                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1227                    if [ "x$dev_exists" != "x" ]; then
1228                        actual_dev=$dev
1229                        break;
1230                    fi
1231                done
1232            fi
1233
1234            # Check if one of all those tries has known success
1235            if [ "x$actual_dev" != "x" ]; then
1236                current_partition=$actual_dev
1237            else
1238                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1239            fi
1240        else
1241            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1242            # they use symlinks in fstab unrelated to what is shown in mount !
1243            if [ _"$partition_mountpt" = _"" ]; then
1244                # set default in case we dont't find it
1245                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1246                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1247                            str_to_find_fmt_with=$tmpp
1248                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1249                            break;
1250                        fi
1251                done
1252            fi
1253        fi
1254
1255        # Detects noauto partitions not mounted and exclude them
1256        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1257        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1258                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1259            continue
1260        fi
1261        # Detects bind partitions and exclude them
1262        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1263                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1264            continue
1265        fi
1266
1267        # Look for devices which have to be excluded
1268        skip=0
1269        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1270            l=""
1271            list_of_devices="`mr-read-all-link $current_partition`"
1272            for d in $list_of_devices; do
1273                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1274            done
1275
1276            # Remove PVs from LVs excluded
1277            l="$l `GetPVsForLV $current_partition`"
1278
1279            # We want a single unique list
1280            list_of_devices="`echo $l | sort -u`"
1281
1282            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1283                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1284                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1285                    skip=1
1286                    continue
1287                fi
1288            done
1289        fi
1290        if [ $skip -eq 1 ]; then
1291            continue
1292        fi
1293
1294        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1295        # Detects iso9660 ISO images and exclude them
1296        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1297                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1298            continue
1299        fi
1300        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1301        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1302        # the former is then a link to the latter, so we test whether
1303        # $current_partition is actually such a link or not and set
1304        # $current_lvolume accordingly. On Debian you may find more than one answer
1305        # so we remove the one corresponding to /dev/.static
1306        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1307        # principle is the same and we need to find the link to it as well.
1308        # Note that $current_lvolume may well be an
1309        # ordinary device. It is just to make sure that we feed the right value
1310        # into any of the LVM tools if possible.
1311
1312        current_lvolume="$current_partition"
1313        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1314            # .static dir are a Debian specificity
1315            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1316            echo $current_lvolume | grep -q ' '
1317            if [ $? -eq 0 ]; then
1318                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1319            fi
1320            # if it's not found, it may well be a real device such as a multipath one
1321            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1322            if [ _"$current_lvolume" = _"" ]; then
1323                current_lvolume="$current_partition"
1324            fi
1325        fi
1326        #
1327        # End of LVM device style variation code (other than $current_lvolume).
1328
1329        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1330            # Size computed via LVM not directly
1331            partition_size="lvm"
1332        else
1333            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1334            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1335            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1336                # Skip swap files
1337                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1338                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1339                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1340                [ "$partition_format" != "swap" ] && partition_format="swap"
1341                if [ "$partition_size" = "" ] ; then
1342                    totalsize=0
1343                    items=0
1344                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1345                        totalsize=$(($totalsize+$i))
1346                        items=$(($items+1))
1347                    done
1348                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1349                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1350                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1351                fi
1352            else
1353                partition_size=`SizeOfPartition $current_partition`
1354            fi
1355        fi
1356        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1357        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1358        if [ "$partition_mountpt" = "" ] ; then
1359            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1360                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1361                    partition_mountpt="raid"
1362                    partition_format="raid"
1363                else
1364                    partition_mountpt="lvm"
1365                    partition_format="lvm"
1366                fi
1367            fi
1368        fi
1369        psz=$partition_size
1370        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1371        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1372        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1373            partition_mountpt="image"
1374            old_partition_fmt=$partition_format
1375            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1376            partition_size=$(($partition_size+1)); # just in case
1377            if [ "$partition_format" = "Linux" ] ; then
1378                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1379                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1380                partition_format=$old_partition_fmt
1381            fi
1382        fi
1383
1384        if [ ! "$partition_mountpt" ] ; then
1385            LogFile "------- $FDISK -l $qq log ------------"
1386            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1387                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1388                [ "$partition_format" ] && break
1389            done
1390            LogFile "------- $FDISK log end ------------"
1391            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1392                partition_format="compaq"
1393            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1394                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1395                continue
1396            fi
1397        fi
1398        if [ "$redhat_label" ]; then
1399            label="$redhat_label"
1400        elif [ "$uuid" ]; then
1401            label="$uuid"
1402        fi
1403
1404        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1405        # in order to mount the root part e.g. in grub.
1406        # One way to solve this is to add the UUID now, if there wasn't one so it's
1407        # restored correctly
1408        if [ _"$label" = _"" ]; then
1409            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1410        fi
1411
1412        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1413        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1414        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1415        if [ "$current_partition" = "" ] ; then
1416            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1417        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1418            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1419                partition_mountpt=raid
1420                partition_format=raid
1421                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1422                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1423            else
1424                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1425            fi
1426        elif [ "$partition_format" = "" ] ; then
1427            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1428        elif [ "$partition_size" = "" ] ; then
1429            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1430        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1431            continue
1432        else
1433            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1434                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1435                partition_format="vfat"
1436            fi
1437            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1438            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1439        fi
1440    done
1441    LogAll "-----------------------------------" 
1442}
1443
1444CheckMountlist() {
1445    local file=$1
1446    # Coherency verification
1447    ML01=`cat $file | wc -l`
1448    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1449    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1450    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1451    if [ "$ML01" -ne "$ML1" ]; then
1452        LogFile "--------------------------------------------"
1453        LogAll "WARNING: Duplicate device entry in mountlist"
1454        LogFile "--------------------------------------------"
1455    fi
1456    if [ "$ML02" -ne "$ML2" ]; then
1457        LogFile "--------------------------------------------"
1458        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1459        LogFile "------------------------------------------------"
1460    fi
1461}
1462
1463OfferToMakeBootableISO() {
1464    local i old_pwd files
1465    if [ -z "$ISO_CMD" ]; then
1466        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1467        return
1468    fi
1469    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1470        echo -en "Shall I make a bootable CD image? (y/[n]) "
1471        read i
1472        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1473    fi
1474    rm -Rf $MINDI_TMP/iso
1475    mkdir -p $MINDI_TMP/iso/{images,archives}
1476    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1477    cp -f $files $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy files to $MINDI_TMP/iso/images"
1478    for i in memdisk memtest.bin memtest.img ; do
1479        j=$MINDI_LIB/$i
1480        k=$MINDI_TMP/iso
1481        if [ -e "$j" ] ; then
1482            LogAll "INFO: Copying $j to $k"
1483            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1484            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1485            if [ _"$MONDO_SHARE" != _"" ]; then 
1486                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1487            fi
1488        fi
1489    done
1490
1491    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1492
1493    if [ $KERNEL_IS_XEN = "yes" ]; then
1494        FindMboot32Binary
1495        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1496        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1497    fi
1498
1499    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1500    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1501    if [ "$ARCH" != "ia64" ] ; then
1502        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1503    fi
1504
1505    # copy boot stuff now generated in PrepareDataDiskImage
1506    if [ "$BOOT_TYPE" = "UEFI" ]; then
1507        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1508        tbc="EFI"
1509    else
1510        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./boot)
1511        tbc="boot"
1512    fi
1513
1514    if [ _"$MONDO_SHARE" != _"" ]; then 
1515        if [ $KERNEL_IS_XEN = "yes" ]; then
1516            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy $xenkernelpath to mondo tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1517            cp $MBOOTC32 $MONDO_ROOT/ 2>> $LOGFILE || Die "Cannot copy $MBOOTC32 to mondo tmp ($MONDO_ROOT/). Did you run out of disk space?"
1518        fi
1519        if [ -e "$LDLINUXC32" ]; then
1520            cp $LDLINUXC32 $MONDO_ROOT/ 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $MONDO_ROOT/. Did you run out of disk space?"
1521        fi
1522        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy $kernelpath to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1523        cp $MINDI_TMP/initrd.img $MONDO_ROOT/ 2>> $LOGFILE || Die "Cannot copy $MINDI_TMP/initrd.img to $MONDO_ROOT/. Did you run out of disk space?"
1524    fi
1525
1526   
1527    old_pwd=`pwd`
1528    cd "$MINDI_TMP/iso"
1529    if [ "$ARCH" != "ia64" ] ; then
1530        if [ _"$MONDO_SHARE" != _"" ]; then 
1531            cp -rf $MINDI_TMP/iso/{initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt,$tbc} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1532            cfgf=`find $MINDI_TMP/iso -name 'isolinux.cfg' | head -1`
1533            if [ -e "$cfgf" ]; then
1534                cp $cfgf $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy $cfgf to $MONDO_ROOT. Did you run out of disk space?"
1535            fi
1536            if [ $KERNEL_IS_XEN = "yes" ]; then
1537                cp -f $MINDI_TMP/iso/xen.gz $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen kernel to $MONDO_ROOT. Did you run out of disk space?"
1538            fi
1539            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1540        fi
1541        CMD="$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table"
1542        if [ "$BOOT_TYPE" = "UEFI" ]; then
1543            # These options do not work for all genisoimage versions :-(
1544            CMD="$CMD -eltorito-alt-boot -efi-boot images/mindi-bootroot.img -no-emul-boot"
1545        fi
1546    else
1547        CMD="$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.img -c images/boot.cat -no-emul-boot"
1548    fi
1549    LogFile "Invoking $CMD"
1550    $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1551    if [ "$?" -ne "0" ] ; then
1552        if [ "$BOOT_TYPE" = "UEFI" ]; then
1553            CMD=`echo $CMD | perl -p -e 's|-efi-boot |-eltorito-platform 0xEF -eltorito-boot |'`
1554            $CMD . > /dev/null 2> $MINDI_TMP/mkisofs.log
1555            if [ "$?" -eq "0" ] ; then
1556                LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1557            else
1558                MakeISOErrors
1559            fi
1560        else
1561            MakeISOErrors
1562        fi
1563    else
1564        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1565    fi
1566    rm -f $MINDI_TMP/mkisofs.log
1567    cd "$old_pwd"
1568}
1569
1570MakeISOErrors() {
1571
1572LogFile "----------- $ISO_CMD's errors --------------"
1573LogAll "$CMD returned the following errors:"
1574cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1575LogAll "ERROR: Failed to create ISO image."
1576}
1577
1578
1579OfferToMakeBootableUSB() {
1580    local i files
1581    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1582        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1583        read i
1584        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1585        if [ "$USBDEVICE" = "" ]; then
1586            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1587            read dev
1588            USBDEVICE=$dev
1589        fi
1590        echo "WARNING: This will erase all content on $USBDEVICE"
1591        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1592        read i
1593        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1594    fi
1595    rm -Rf $MINDI_TMP/usb
1596    mkdir -p $MINDI_TMP/usb
1597    USBPART="${USBDEVICE}1"
1598
1599    echo -en "Transforming $USBDEVICE in a Bootable device " 
1600    echo -en "."
1601    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1602    LogFile "INFO: Checking $USBDEVICE"
1603    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1604    if [ $? -ne 0 ]; then
1605        LogAll "ERROR: Unable to access $USBDEVICE"
1606        LogAll "       Make sure your USB device is plugged in"
1607        MindiExit -1
1608    fi
1609    echo -en "."
1610    # Some distro do auto mount at that point (Ubuntu)
1611    LogFile "INFO: Unmounting $USBPART just in case"
1612    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1613    if [ "$BOOT_TYPE" = "BIOS" ]; then
1614        # If your key has no MBR it may cause an issue
1615        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1616        if [ -r $MBRFILE ]; then
1617            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1618            dd if=$MBRFILE of=$USBDEVICE
1619        else
1620            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1621            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1622        fi
1623    fi
1624    LogFile "INFO: Preparing $USBDEVICE"
1625    cat > $MINDI_TMP/fdisk.txt << EOF
1626d
1627d
1628d
1629d
1630n
1631p
16321
1633
1634
1635t
1636b
1637a
16381
1639w
1640EOF
1641    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1642    if [ $? -ne 0 ]; then
1643        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1644        LogAll "       Make sure your USB device is plugged in"
1645        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1646        MindiExit -1
1647    fi
1648    LogFile "fdisk build file"
1649    LogFile "----------------"
1650    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1651    LogFile "----------------"
1652    rm -f $MINDI_TMP/fdisk.txt
1653    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1654    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1655    echo -en "."
1656    # Calling kpartx in case devices were not created
1657    if [ -x "/sbin/kpartx" ]; then
1658        /sbin/kpartx -a $USBDEVICE
1659    fi
1660    # Some distro do auto mount at that point (Ubuntu)
1661    LogFile "INFO: Unmounting $USBPART just in case again"
1662    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1663    echo -en "."
1664    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1665    if [ "`which dmsetup`" != "" ]; then
1666        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1667        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1668            LogFile "INFO: Removing $block_id from device mapper."
1669            sleep 1
1670            dmsetup remove $block_id
1671        fi
1672    fi
1673    echo -en "."
1674    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1675    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1676    if [ $? -ne 0 ]; then
1677        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1678        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1679        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1680        MindiExit -1
1681    fi
1682    echo -en "."
1683    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1684    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1685    if [ $? -ne 0 ]; then
1686        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1687        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1688        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1689        MindiExit -1
1690    fi
1691    echo -en "."
1692    mkdir -p $MINDI_TMP/usb/images
1693    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1694    cp -f $files $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy files to $MINDI_TMP/usb/images"
1695    echo -en "."
1696    for i in memdisk memtest.bin memtest.img ; do
1697        j=$MINDI_LIB/$i
1698        k=$MINDI_TMP/usb
1699        if [ -e "$j" ] ; then
1700            LogFile "INFO: Copying $j to $k"
1701            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1702            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1703        fi
1704    done
1705    echo -en "."
1706    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1707    echo -en "."
1708    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1709    echo -en "."
1710    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1711    echo -en "."
1712    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1713    echo -en "."
1714    LogAll "----------- syslinux's conf --------------"
1715    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1716    LogAll "------------------------------------------"
1717    umount $MINDI_TMP/usb
1718    if [ "$ARCH" != "ia64" ] ; then
1719        syslinux -v 2>&1 | grep -q 4.02
1720        if [ $? -eq 0 ]; then
1721            # This buggy version of syslinux requires a call to --stupid and not -s
1722            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1723            res=$?
1724        else
1725            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1726            res=$?
1727        fi
1728        if [ $res -ne 0 ] ; then
1729            LogAll "----------- syslinux's errors --------------"
1730            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1731            LogAll "------------------------------------------"
1732            LogIt "ERROR: Failed to create USB image."
1733        else
1734            echo -e "$DONE"
1735            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1736        fi
1737        rm -f $MINDI_TMP/syslinux.log
1738    else
1739        LogAll "ERROR: No USB boot support for ia64"
1740        MindiExit -1
1741    fi
1742}
1743
1744
1745MakeMessageFile() {
1746   
1747    if [ -x "/bin/lsb_release" ]; then
1748        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1749    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1750        DESC="Arch Linux"
1751        if [ -r /var/log/pacman.log ]; then
1752            # there are no releases but we can get the last system upgrade
1753            # Output example:   Arch Linux [2011-03-03 01:39]
1754            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1755        fi
1756    elif [ -x "/etc/os-release" ]; then
1757        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1758    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1759        # For pb >= 0.9.8
1760        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1761    elif [ -r /etc/issue.net ]; then
1762        DESC=`head -1 /etc/issue.net`
1763    elif [ -r /etc/issue ]; then
1764        DESC=`head -1 /etc/issue`
1765    else
1766        DESC="Unknown desc"
1767    fi
1768    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1769    if [ _"$MONDO_SHARE" != _"" ]; then
1770        if [ "$CDRECOVERY" != "yes" ] ; then
1771            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1772                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1773                echo -en "$BOOT_MEDIA_MESSAGE"
1774            elif [ ! "$MINDI_TMP" ] ; then
1775                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1776                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1777                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1778                fi
1779            else
1780                echo -en "$BOOT_MEDIA_MESSAGE"
1781            fi
1782        else
1783            echo -en "\
1784To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1785CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1786        fi
1787    fi
1788
1789    # Also create the other help screens
1790    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1791    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1792    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1793}
1794
1795
1796MakeBootConfFile() {
1797    local options i ooo
1798    options=""
1799    # Type of boot file (elilo or syslinux/isolinux)
1800    type=$1
1801    if [ "$type" = "elilo" ]; then
1802        sep="="
1803        sepdef="="
1804    else
1805        sep=" "
1806        sepdef=" "
1807        if [ "$type" = "grub" ]; then
1808            sepdef="="
1809        fi
1810    fi
1811
1812    # Generic header for conf file
1813    if [ "$type" = "elilo" ]; then
1814        echo -en "prompt\n"
1815    elif [ "$type" = "grub" ]; then
1816        echo -en "pause Press a key when ready to restore\n"
1817    else
1818        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1819    fi
1820
1821    # Compute which default option to boot from
1822    echo -en "default${sepdef}"
1823    if [ "$CDRECOVERY" = "yes" ] ; then
1824        if [ "$type" = "grub" ]; then
1825            # TODO: Which num ???
1826            echo -en "0\n"
1827        else
1828            echo -en "RESTORE\n"
1829        fi
1830    # In case it's mondoarchive
1831    elif [ _"$MONDO_SHARE" != _"" ]; then
1832        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1833            if [ "$type" = "grub" ]; then
1834                echo -en "3\n"
1835            else
1836                echo -en "iso\n"
1837            fi
1838        else
1839            if [ "$type" = "grub" ]; then
1840                echo -en "1\n"
1841            else
1842                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1843            fi
1844        fi
1845    else
1846        if [ "$type" = "grub" ]; then
1847            echo -en "0\n"
1848        else
1849            echo -en "expert\n"
1850        fi
1851    fi
1852
1853    # Handle timeout
1854    if [ "$CDRECOVERY" != "yes" ] ; then
1855        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1856    else
1857        echo -en "timeout${sep}10000\n"
1858    fi
1859    echo -en "\n"
1860
1861    # prepare which labels will be generated
1862    if [ "$CDRECOVERY" = "yes" ] ; then
1863        options="RESTORE expert"
1864    else
1865        if [ _"$MONDO_SHARE" != _"" ]; then
1866            options="interactive expert compare iso nuke isonuke"
1867        else
1868            options="expert"
1869        fi
1870    fi
1871
1872    # Generate rest of conf file
1873    for i in $options ; do
1874        ooo=$i
1875        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1876        if [ "$type" = "elilo" ]; then
1877            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1878        elif [ "$type" = "grub" ]; then
1879            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
1880        else
1881            ps="/"
1882            if [ "$type" = "syslinux" ]; then
1883                ps=""
1884            fi
1885            if [ $KERNEL_IS_XEN = "no" ]; then
1886                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1887            else
1888                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1889            fi
1890        fi
1891        echo -en "$outstr"
1892    done
1893    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1894        if [ "$type" = "elilo" ]; then
1895            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1896            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1897        elif [ "$type" = "grub" ]; then
1898            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
1899        else
1900            ps="/"
1901            if [ "$type" = "syslinux" ]; then
1902                ps=""
1903            fi
1904            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1905            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1906        fi
1907    fi
1908}
1909
1910PrepareBootDiskImage() {
1911    # LILO originally
1912    local dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootconf bootimage
1913    kernelpath=$1
1914    retval=0
1915
1916    old_pwd=`pwd`
1917    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1918    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1919    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1920    echo -en "..."
1921    imagefile=$MINDI_TMP/mindi-bootroot.img
1922    mkdir -p $mountpoint
1923    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1924    if [ "$BOOT_TYPE" = "BIOS" ]; then
1925        # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1926        syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1927    fi
1928    if [ "$BOOT_TYPE" = "UEFI" ]; then
1929        # Should be GPT in that case to allow direct boot
1930        parted -s $imagefile mklabel gpt
1931    fi
1932    LogFile "INFO: Creating vfat filesystem on $imagefile"
1933    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1934
1935    # Only move it now to its final destination and use it now
1936    mv $imagefile $MINDI_CACHE
1937    imagefile=$MINDI_CACHE/mindi-bootroot.img
1938
1939    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1940
1941    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1942    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1943    if [ "$?" -ne "0" ] ; then
1944        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1945        LogAll "       Please unload some of your modules and try again."
1946        LogAll "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1947        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1948        retval=$(($retval+1))
1949    fi
1950    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1951
1952    mkdir -p $mountpoint/tmp
1953    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1954        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1955    fi
1956
1957    # copy the kernel across
1958    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1959    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1960    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1961
1962    retval=0
1963    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1964    retval=$?
1965    if [ $KERNEL_IS_XEN = "yes" ]; then
1966        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1967        let retval+=$?
1968    fi
1969 
1970    if [ "$retval" -ne "0" ] ; then
1971        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1972        du -sk $mountpoint/* >> $LOGFILE
1973        LogFile "--- end of list of files ---"
1974        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1975        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1976        cd "$old_pwd"
1977        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1978        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1979        [ "$imagefile" != "" ] && rm -f $imagefile
1980        LogIt "ERROR: Sorry, your kernel is too big for your image"
1981        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1982    fi
1983    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1984    LogFile "INFO: Free space left on image = $free_space KB"
1985    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1986
1987    # make it bootable
1988    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1989    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1990
1991    # copy boot stuff now generated in PrepareDataDiskImage
1992    if [ "$BOOT_TYPE" = "UEFI" ]; then
1993        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1994    else
1995        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./boot)
1996    fi
1997
1998    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1999    echo -en "..."
2000    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2001
2002    if [ "$retval" -eq "0" ] ; then
2003        echo -en "...$DONE\n"
2004        LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2005    else
2006        echo -en "...failed\n"
2007        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2008    fi
2009    #[ "$imagefile" != "" ] && rm -f $imagefile
2010    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning $retval"
2011    return $retval
2012}
2013
2014ParseModprobeForIncludes() {
2015local MODPROBE_CONF mpincfile includes include
2016
2017MODPROBE_CONF=/etc/modprobe.conf
2018mpincfile=$1
2019touch $mpincfile
2020if [ -a $MODPROBE_CONF ]; then
2021    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2022    if [ -n "$includes" ]; then
2023        for include in $includes
2024        do
2025            if [ -a "$include" ]; then
2026                echo $include >> $mpincfile
2027            fi
2028        done
2029    fi
2030fi
2031}
2032
2033
2034PrepareDataDiskImages() {
2035    local needlist bigdir diskdir res i j k old_pwd lines lfiles includefile
2036
2037    rm -f $MINDI_CACHE/mindi.iso
2038    needlist=$MINDI_TMP/what-we-need.txt
2039    bigdir=$MINDI_TMP/bigdir
2040    mkdir -p $bigdir/usr/bin
2041    mkdir -p $bigdir/usr/sbin
2042    includefile=$MINDI_TMP/$$.includefile.txt
2043
2044    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2045    if [ -e "$DEPLIST_FILE" ]; then
2046        lfiles="$DEPLIST_FILE $lfiles"
2047    fi
2048    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2049    ParseModprobeForIncludes $includefile
2050    lines=$(($lines+`cat $includefile | wc -l`))
2051    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2052    res=$?
2053    rm -f $includefile
2054    ListKernelModulePaths >> $needlist
2055    if [ "$res" -ne "0" ] ; then
2056        Die "You have $res files present in dependency list\nbut absent from filesystem."
2057    fi
2058    mkdir -p $bigdir/tmp
2059    if [ _"$MONDO_SHARE" != _"" ]; then
2060        # TODO: no reason to have the cfg file stored twice
2061        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2062        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2063    fi
2064
2065    # Needs to be done after the MRCFG creation
2066    FindAndAddUserKeyboardMappingFile
2067
2068    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2069    DropOptimizedLibraries $needlist $bigdir
2070    echo -en "Assembling dependency files"
2071
2072    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2073
2074    # also copy io.sys and msdos.sys, if we can find them
2075    for i in `mount | cut -d' ' -f3` ; do
2076        for j in io.sys msdos.sys ; do
2077            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2078        done
2079    done
2080
2081    # master boot record, too
2082    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2083    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2084        LogAll "INFO: Backing up $i's MBR"
2085        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2086        sleep 1
2087        sync
2088        j=$i
2089        [ -h "$j" ] && j=`readlink -f $j`
2090        LogAll "INFO: Creating /dev/boot_device ($j)"
2091        mkdir -p $bigdir/dev
2092        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2093    fi
2094
2095    old_pwd=`pwd`
2096    cd "$bigdir"
2097
2098    # Get terminfo content
2099    ti="usr/share/terminfo/l"
2100    if [ -d /$ti ]; then
2101        mkdir -p $ti
2102        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2103    fi
2104    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2105        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2106        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2107    fi
2108    if [ -d "/lib/dev-state" ]; then 
2109        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2110    fi
2111    cd "$old_pwd"
2112    echo -e "$DONE"
2113    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2114    MakeMountlist $MINDI_TMP/mountlist.txt
2115    CheckMountlist $MINDI_TMP/mountlist.txt
2116    mkdir -p $bigdir/tmp
2117    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2118    if [ _"$MONDO_SHARE" != _"" ]; then
2119        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2120    fi
2121    if [ $LVM != "false" ]; then
2122        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2123        if [ "$?" -ne "0" ]; then
2124            LVM="false"
2125            rm -f $bigdir/tmp/i-want-my-lvm
2126        else
2127            LogFile "Your i-want-my-lvm file content is:"
2128            LogFile "-----------------------------------"
2129            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2130            LogFile "-----------------------------------"
2131        fi
2132    fi
2133    LogFile "Your mountlist.txt file content is:"
2134    LogFile "-----------------------------------"
2135    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2136    LogFile "-----------------------------------"
2137
2138    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2139    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2140    if [ _"$MONDO_SHARE" != _"" ]; then
2141        for q in filelist.full.gz biggielist.txt ; do
2142            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2143            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2144        done
2145    fi
2146
2147    # copy (e)lilo/isolinux/grub/whatever stuff into it as well
2148    # to get it on the media (in addition to the boot part
2149    # and also to support UEFI boot mechanism
2150    bootdir=$bigdir/boot
2151    bootconf="$bootdir/syslinux.cfg"
2152    boottype=isolinux
2153    mkdir -p $bootdir
2154    if [ "$BOOT_TYPE" != "BIOS" ]; then
2155        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2156            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2157            MindiExit -1
2158        fi
2159        # EFI or UEFI
2160        # TODO: names are hard-coded for now
2161        if [ "$BOOT_TYPE" = "UEFI" ]; then
2162            # UEFI
2163            efidir=$bigdir/EFI/BOOT
2164            FindSyslinux64EFI
2165            bootbin=$SYSLINUX64EFI
2166            bootconf="$efidir/syslinux.cfg"
2167           
2168        else
2169            # EFI
2170            efidir=$bootdir
2171            bootbin=`find /boot/efi -iname "elilo.efi" | head -1`
2172            boottype=elilo
2173            bootconf="$efidir/elilo.conf"
2174
2175        fi
2176
2177        # Copy it so that CD-ROM menu entry is satisfied
2178        mountefi=0
2179        df -T | grep /boot/efi | grep -qE 'vfat'
2180        if [ $? -ne 0 ]; then
2181            mount /boot/efi
2182            if [ $? -ne 0 ]; then
2183                echo "You have to mount your (U)EFI partition when using mindi"
2184                MindiExit -1
2185            fi
2186            mountefi=1
2187        fi
2188        mkdir -p $efidir
2189        cp $bootbin $efidir
2190        if [ $mountefi -eq 1 ]; then
2191            umount /boot/efi 2>&1 > /dev/null
2192        fi
2193
2194        FindLdlinuxe64Binary
2195        if [ -e "$LDLINUXE64" ]; then
2196            LogFile "INFO: Copying $LDLINUXE64 to $efidir"
2197            cp $LDLINUXE64 $efidir 2>> $LOGFILE || Die "Cannot copy $LDLINUXE64 to $efidir). Did you run out of disk space?"
2198        fi
2199    else   
2200        # Useful for syslinux 5.x
2201        FindLdlinux32Binary
2202        if [ -e "$LDLINUXC32" ]; then
2203            LogFile "INFO: Copying $LDLINUXC32 to $bootdir"
2204            cp $LDLINUXC32 $bootdir 2>> $LOGFILE || Die "Cannot copy $LDLINUXC32 to $bootdir). Did you run out of disk space?"
2205        fi
2206    fi
2207
2208    MakeBootConfFile $boottype > $bootconf
2209
2210    echo -en "Tarring and zipping the data content..."
2211    size_of_all_tools=`du -sk $bigdir | cut -f1`
2212    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2213    LogFile "Size of the data content"
2214    LogFile "------------------------"
2215    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2216    LogFile "------------------------"
2217    echo -e "$DONE"
2218
2219    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2220    rm -rf $bigdir
2221    rm -f $needlist
2222}
2223
2224
2225Prompt() {
2226    echo -en "$1"
2227    read line
2228}
2229
2230
2231ReadLine() {
2232    local i incoming
2233    read incoming
2234    i=0
2235    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2236        i=$(($i+1))
2237        read incoming
2238    done
2239    echo "$incoming"
2240}
2241
2242
2243SizeOfPartition() {
2244    local devpath drive res stub
2245    device=$1
2246    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2247        Die "Cannot find $device's size - is your /etc/fstab sane?"
2248    fi
2249    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2250        res=`SizeOfRaidPartition $device`
2251        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2252        echo "$res"
2253        return 0
2254    fi
2255    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2256    res=`$FDISK -s $device 2>> $LOGFILE`
2257    # end patch
2258    # take only the first in case of multiple mount (cifs, nfs, ...)
2259    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2260    [ "$res" = "" ] && res="-1"
2261    echo $res
2262    return 0
2263}
2264
2265
2266SizeOfRaidPartition() {
2267    local real_dev smallest_size silly tmp
2268
2269    silly=999999999
2270    smallest_size=$silly
2271
2272    for real_dev in `GetRaidDevMembers $1` ; do
2273        tmp=`SizeOfPartition $real_dev`
2274        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2275    done
2276
2277    if [ "$smallest_size" = "$silly" ] ; then
2278        echo "-1"
2279        return 1
2280    else
2281        echo "$smallest_size"
2282        return 0
2283    fi
2284}
2285
2286
2287StripExecutable()
2288{
2289    local tmpfile
2290
2291    tmpfile=$MINDI_TMP/stripped.$$.dat
2292    [ -d "$1" ] || [ -h "$1" ] && return
2293    cp -f $1 $tmpfile 2>> $LOGFILE
2294    strip $tmpfile 2> /dev/null
2295    if [ "$?" -eq "0" ] ; then
2296        cp -f $tmpfile $1 2>> $LOGFILE
2297        LogFile "INFO: Stripped binary $2"
2298    fi
2299    rm -f $tmpfile
2300}
2301
2302KernelVer() {
2303        local fkern_ver fname
2304
2305        fname=$1
2306        file $fname | grep -q gzip
2307        if [ "$?" -eq "0" ] ; then
2308            # Used by ia64
2309            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2310        else
2311            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2312        fi
2313        echo "$fkern_ver"
2314}
2315
2316
2317# WARNING: This function should just echo the final result !!!
2318#
2319TryToFindKernelPath() {
2320    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2321
2322    we_want_version=$KERVERRUN
2323    possible_kernels=""
2324    duff_kernels=""
2325    output=""
2326
2327    if [ "$ARCH" = "ia64" ] ; then
2328       root="/boot/efi/efi"
2329    else
2330       root="/"
2331    fi
2332    # See if we're booted from a Xen kernel
2333    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2334    if [ -f /proc/xen/capabilities ]; then
2335        # It's a Xen kernel
2336        KERNEL_IS_XEN="yes"
2337        LogFile "INFO: It's a Xen kernel..."
2338    fi
2339
2340    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2341        [ ! -e "$fname" ] && continue
2342        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2343        fkern_ver=`KernelVer $fname`
2344        [ "$fkern_ver" = "" ] && continue
2345        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2346        [ -f "$fname" ] || continue
2347        [ -h "$fname" ] && continue
2348        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2349        file $fname | grep -q gzip
2350        if [ "$?" -eq "0" ] ; then
2351            # Used by ia64
2352            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2353                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2354                duff_kernels="$fname $duff_kernels"
2355            else
2356                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2357                possible_kernels="$fname $possible_kernels"
2358            fi
2359        else
2360            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2361                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2362                duff_kernels="$fname $duff_kernels"
2363            else
2364                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2365                possible_kernels="$fname $possible_kernels"
2366            fi
2367        fi
2368    done
2369    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2370        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2371    fi
2372    if [ ! "$possible_kernels" ] ; then
2373        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2374        possible_kernels="$duff_kernels"
2375        if [ ! "$possible_kernels" ] ; then
2376            LogAll "INFO: Sorry, no duff kernels either"
2377        else
2378            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2379            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2380        fi
2381    fi
2382    if [ $KERNEL_IS_XEN = "yes" ]; then
2383        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2384        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2385    fi
2386    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2387    noof_kernels=`CountItemsIn "$possible_kernels"`
2388    if [ "$noof_kernels" -eq "0" ] ; then
2389        LogAll "Could not find your kernel."
2390        if [ -e "/boot/vmlinuz" ] ; then
2391            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2392            output=/boot/vmlinuz
2393        else
2394            output=""
2395        fi
2396    elif [ "$noof_kernels" -eq "1" ] ; then
2397        kp=`echo "$possible_kernels" | sed s/' '//`
2398        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2399        output="$kp"
2400    else
2401        for i in $possible_kernels ; do
2402            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2403                LogAll "INFO: OK, I used my initiative and found that "
2404                LogAll "INFO: $i is probably your kernel. "
2405                output="$i"
2406                break
2407            fi
2408        done
2409        if [ ! -n "$output" ]; then
2410            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2411                output=/boot/vmlinuz
2412                LogFile "INFO: Schlomo, this one's for you."
2413            else
2414                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2415                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2416                LogFile "INFO: $possible_kernels"
2417                output=""
2418            fi
2419        fi
2420    fi
2421    if [ $KERNEL_IS_XEN = "yes" ]; then
2422        if [ "$noof_xenkernels" -eq "0" ]; then
2423            xenkernelpath=""
2424        elif [ "$noof_xenkernels" -eq "1" ]; then
2425            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2426            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2427        else
2428            for i in $possible_xenkernels ; do
2429                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2430                    LogFile "INFO: OK, I used my initiative and found that "
2431                    LogFile "INFO: $i is probably your Xen kernel. "
2432                    xenkernelpath="$i"
2433                    break
2434                fi
2435            done
2436            if [ ! -n "$xenkernelpath" ]; then
2437                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2438                if [ ! -n "$new_possible_xenkernels" ]; then
2439                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2440                    LogFile "INFO: Using $xenkernelpath"
2441                else
2442                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2443                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2444                    LogFile "INFO: $possible_xenkernels"
2445                    output=""
2446                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2447                    LogFile "INFO: Using $xenkernelpath"
2448                fi
2449            fi
2450        fi
2451        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2452            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2453        fi
2454    fi
2455    #LogAll "TryToFindKernelPath found $output"
2456    echo "$output"
2457}
2458
2459
2460TurnTgzIntoRdz() {
2461    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink templog
2462
2463    tgz_dir_fname=$1
2464    rdz_fname=$2
2465    kernelsize=$3
2466    maxsize=$(($BOOT_SIZE-$kernelsize))
2467    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2468    tempfile=$MINDI_TMP/temp.rd
2469    res=0 
2470    templog=$MINDI_TMP/$$.log
2471    > $templog
2472
2473    echo -en "..."
2474    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2475    echo -en "..."
2476    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2477    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2478    echo -en "..."
2479    mkdir -p $mountpoint
2480    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2481    echo -en "..."
2482    old_pwd=`pwd`
2483    cd "$mountpoint"
2484
2485    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2486    for d in bin sbin lib lib64; do
2487        if [ -h "/$d" ]; then
2488            thelink=`readlink /$d`
2489            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2490            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2491            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2492                rmdir $mountpoint/$d
2493            fi
2494            if [ ! -h $mountpoint/$d ]; then
2495                rm -f $mountpoint/$d 2> /dev/null
2496                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2497            fi
2498        fi
2499    done
2500
2501    LogFile "INFO: what is now in $mountpoint"
2502    ls -alR $mountpoint >> $LOGFILE
2503   
2504    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2505    # copy from rootfs into mountpoint
2506    for f in $tgz_dir_fname/*; do 
2507        if [ ! -r $f ]; then
2508            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2509        else
2510            cp -af $f . 2>&1 >> $LOGFILE
2511        fi
2512    done
2513    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2514    ln -sf usr/sbin/init linuxrc
2515
2516    cd dev || Die "Can't cd to dev"
2517    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2518    rm -f dev-entries.tgz
2519    cd ..
2520
2521    for w in insmod.static insmod.static.old ; do
2522        s=`which $w 2> /dev/null`
2523        if [ -e "$s" ] ; then
2524            tar cf - -C / $s 2> /dev/null | tar xf -
2525        fi
2526    done
2527
2528    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2529   
2530    # Copy of files mandatory for ssh to automate mount if sshfs is used
2531    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2532    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2533    cat > $mountpoint/tmp/myssh << EOF
2534ssh -o StrictHostKeyChecking=no $*
2535EOF
2536    chmod 755 $mountpoint/tmp/myssh
2537
2538    # Copy of files mandatory for ld.so
2539    cp -a /etc/ld.so.c* $mountpoint/etc
2540
2541    # Handle the case where busybox and mount are dynamically linked
2542    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2543    if [ $? -eq 0 ]; then
2544        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2545        rm -f bin/mount
2546    fi
2547
2548    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2549    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2550    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2551        if [ -d $f ]; then
2552            for g in `find $f`; do 
2553                echo $g >> $MINDI_TMP/minimal.lis
2554                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2555            done
2556        else 
2557            if [ -r $f ]; then
2558                echo $f >> $MINDI_TMP/minimal.lis
2559                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2560            fi
2561        fi
2562    done
2563    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2564        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2565    done
2566    # Initial / are trucated by tar
2567    finallist=""
2568    # Remove directories from the list, as tar/cp will create them anyway
2569    # and it may hurt if /lib is in it as on Debian/Ubuntu
2570    # recent bash says that -d is true for a link to a dir !
2571    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2572        if [ -e "$f" -a ! -d "$f" ] || [ -h $f ]; then
2573            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2574            if [ ! -e "$mountpoint/$f" ]; then
2575                finallist="$finallist $f"
2576            fi
2577        fi
2578    done
2579    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2580
2581    #tar cf - $finallist 2> $templog | tar xf - || LogIt "WARNING: Problem in minimal analysis" $templog
2582    echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $templog
2583    cp -a --parents $finallist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog
2584
2585    # In case target /bin dir still doesn't exist, create it before using it
2586    if [ ! -d $mountpoint/bin ]; then
2587        mkdir -p $mountpoint/bin
2588    fi
2589
2590    # For older distributions expecting /sbin/init provides it
2591    if [ ! -e "sbin/init" ]; then
2592        (cd sbin ; ln -sf ../usr/sbin/init .)
2593    fi
2594
2595    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2596    ln -sf /bin/bash bin/sh
2597    LogFile "INFO: Using bash as default shell"
2598
2599    # Avoids an issue on some distro (RHEL5)
2600    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2601
2602    mkdir -p $mountpoint/tmp
2603    # Management of udev (which includes modprobe in rules)
2604    ps auxww | grep -v grep | grep -qw udevd
2605    if [ $? -eq 0 ]; then
2606        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2607        LogFile "INFO: udev device manager found"
2608        tar cf - -C / /etc/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $templog
2609        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2610        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2611        # Do not do it if it's a link (Ubuntu 64 bits #503)
2612        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2613            tar cf - -C / /lib64/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $templog
2614        fi
2615        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2616            tar cf - -C / /lib32/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $templog
2617        fi
2618        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2619            tar cf - -C / /lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $templog
2620        fi
2621        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2622            tar cf - -C / /usr/lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog
2623        fi
2624        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2625            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2626            lis=""
2627            # Get only the files which exist in that list
2628            # and potentially their symlink structure
2629            for i in $lis2; do
2630                if [ -h $i ]; then
2631                    j=$i
2632                    while [ -h $j ]; do
2633                        lis="$lis $j"
2634                        j=`readlink -f $j`
2635                    done
2636                    lis="$lis $j"
2637                elif [ -f $i ]; then
2638                    lis="$lis $i"
2639                fi
2640            done
2641            # And their deps
2642            LocateDeps $lis > $MINDI_TMP/udev.lis
2643            for i in $lis; do
2644                if [ "`echo $i | cut -c1`" = "/" ]; then
2645                    j=`echo $i | cut -c2-`
2646                    [ "$j" != "" ] && rm -f $j
2647                fi
2648                echo "$i" >> $MINDI_TMP/udev.lis
2649            done
2650            finallist=""
2651            # Remove directories from the list, as tar/cp will create them anyway
2652            # and it may hurt if /lib is in it as on Debian/Ubuntu
2653            # recent bash says that -d is true for a link to a dir !
2654            for f in `sort -u $MINDI_TMP/udev.lis`; do
2655                if [ -e "$f" -a ! -d "$f" ] || [ -h "$f" ]; then
2656                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2657                    if [ ! -e "$mountpoint/$f" ]; then
2658                        finallist="$finallist $f"
2659                    fi
2660                fi
2661            done
2662            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $templog
2663            echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $templog
2664            cp -a --parents $finallist -t $mountpoint/ 2> $templog  || LogIt "ERROR: Problem in udev.lis analysis" $templog
2665            rm -f $MINDI_TMP/udev.lis
2666        else
2667            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2668            LogAll "         mindi will use static devices which may cause problems"
2669            rm -f $mountpoint/tmp/USE-UDEV
2670        fi
2671    fi
2672
2673    # Management of potential HW info (ProLiant only at the moment)
2674    rm -rf $MINDI_CACHE/bkphw
2675    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2676    if [ -d $MINDI_CACHE/bkphw ]; then
2677        LogIt "INFO: Hardware Information found and saved ..."
2678        cp -rp $MINDI_CACHE/bkphw .
2679        if [ -f $MINDI_CACHE/tools.files ]; then
2680            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2681            LocateDeps $lis > $MINDI_TMP/tools.lis
2682            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $templog
2683        fi
2684        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2685            mv -f $MINDI_CACHE/mindi-rsthw .
2686            chmod 755 ./mindi-rsthw
2687        fi
2688        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2689    fi
2690
2691    # Management of perl scripts delivered needed at restore time
2692    LogIt "INFO: Analyzing perl modules dependencies"
2693    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog
2694    LogFile "DBG4: Perl Modules found:"
2695    LogFile "-------------------------"
2696    cat $MINDI_TMP/perl.lis >> $LOGFILE
2697    LogFile "-------------------------"
2698    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $templog
2699
2700    for w in cdrom groovy-stuff ; do
2701        mkdir -p mnt/$w
2702    done
2703
2704    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $templog
2705
2706    echo -en "..."
2707    cd /
2708
2709    needed_modules=""
2710    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2711
2712    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2713        # For PXE boot
2714        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2715    fi
2716    for i in $DENY_MODS; do
2717        LogFile "INFO: Removing $i from the list of modules to load"
2718        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2719    done
2720
2721    if [ "${kernelname}" != "" ]; then
2722        needed_modules_path=lib/modules/${kernelname}
2723        mkgmopt="-k ${kernelname}"
2724    else
2725        needed_modules_path=lib/modules/$KERVERRUN
2726        mkgmopt="-k $KERVERRUN"
2727    fi
2728
2729    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2730    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2731
2732    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2733    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog
2734
2735    # Uncompress modules if not using udev and native modprobe
2736    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2737        for i in $needed_modules; do
2738            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2739                gunzip -f $mountpoint/$i
2740            fi
2741            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2742                bunzip2 -f $mountpoint/$i
2743            fi
2744            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2745                unxz -f $mountpoint/$i
2746            fi
2747            LogFile "INFO: Uncompressing $i"
2748        done
2749    fi
2750
2751    # Also copy modules.* in case of udev so that normal modprobe works
2752    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog
2753
2754    # Copy FW in case some drivers needs it
2755    for d in "/lib" "/usr/lib"; do
2756        if [ -d "$d/firmware" -a ! -h $d ]; then
2757            cp -a "$d/firmware" "$mountpoint/$d"
2758        fi
2759    done
2760
2761    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2762    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2763        if [ -d "$d/multipath" -a ! -h $d ]; then
2764            cp -a "$d/multipath" "$mountpoint/$d"
2765        fi
2766    done
2767
2768    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2769    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e "$mountpoint/bin/$i" ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2770
2771    # Copy an additional ProLiant tool for OBDR support
2772    if [ -f $MINDI_TMP/OBDR ]; then
2773        found=0
2774        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2775            mkdir -p $mountpoint/usr/bin
2776            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2777            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2778            found=1
2779        fi
2780        if [ -x /usr/bin/sg_wr_mode ]; then
2781            mkdir -p $mountpoint/usr/bin
2782            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2783            LocateDeps $lis > $MINDI_TMP/obdr.lis
2784            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $templog)
2785            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2786            found=1
2787        fi
2788        if [ $found -eq 0 ]; then
2789            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2790            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2791        fi
2792    fi
2793
2794    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2795        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2796        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2797        rm -f $mountpoint/sbin/devfsd
2798    fi
2799    cd "$old_pwd"
2800    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2801    if [ _"$MONDO_SHARE" != _"" ]; then
2802        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2803        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2804        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2805        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2806        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2807    fi
2808
2809    # Create module list to load at restore time
2810    rm -f $mountpoint/tmp/modules
2811    for m in $CDROM_MODS; do
2812        echo $m >> $mountpoint/tmp/modules
2813    done
2814
2815    # copy boot stuff now generated in PrepareDataDiskImage
2816    if [ "$BOOT_TYPE" = "UEFI" ]; then
2817        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
2818    else
2819        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./boot)
2820    fi
2821
2822    mkdir -p $mountpoint/proc
2823    LogFile "---------------------------"
2824    LogFile "Size of initial ramdisk:"
2825    LogFile "---------------------------"
2826    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2827    LogFile "---------------------------"
2828    LogFile "Content of initial ramdisk:"
2829    LogFile "---------------------------"
2830    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2831    LogFile "---------------------------"
2832
2833    # Determine what filesystem to use for initrd image
2834    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2835    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2836    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2837    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2838        # say what will be used
2839        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2840        # kernel expects linuxrc in ext2 filesystem
2841        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2842        # unmount loop filesystem and create image file using the standard approach
2843        umount $mountpoint || Die "Cannot unmount $tempfile"
2844        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2845        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2846            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2847        else
2848            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2849        fi
2850        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2851        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2852        rm -f ${rdz_fname}.tmp
2853        # log that we are done
2854        LogFile "      ...done."
2855    elif [ "$gvFileSystem" = "initramfs" ]; then
2856        # say what will be used
2857        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2858        # make sure that cpio is there
2859        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2860        # go into filesystem
2861        cd "$mountpoint"
2862        # kernel expects init in cpio filesystem
2863        ln -sf usr/sbin/init init
2864        # create cpio image file and unmount loop filesystem
2865        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2866        cd "$old_pwd"
2867        umount $mountpoint || Die "Cannot unmount $tempfile"
2868        # log that we are done
2869        LogFile "      ...done."
2870    else
2871        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2872    fi
2873
2874    if [ "$res" -eq "0" ] ; then
2875        echo -en "..."
2876    else
2877        echo -en "\rMade an rdz WITH ERRORS.           \n"
2878    fi
2879    return 0
2880}
2881
2882
2883##############################################################################
2884#----------------------------------- Main -----------------------------------#
2885##############################################################################
2886
2887# Now we can create what we need
2888mkdir -p $MINDI_TMP
2889
2890# --nolog needs to be first, and is used in analyze-my-lvm
2891if [ "$1" = "--nolog" ] ; then
2892    shift
2893    LOGFILE=/dev/stderr
2894else
2895    > $LOGFILE
2896fi
2897if [ "$1" = "--printvar" ] ; then
2898    shift
2899    if [ _"$1" != _"" ] ; then
2900        set | grep -Ew "^$1" | cut -d= -f2
2901    fi
2902    exit 0
2903fi
2904
2905LogFile "mindi v$MINDI_VERSION"
2906LogFile "$ARCH architecture detected"
2907LogFile "mindi called with the following arguments:"
2908echo "$@">> $LOGFILE
2909LogFile "Start date : `date`"
2910LogFile "-----------------------------"
2911
2912[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2913
2914# Log some capital variables
2915[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2916[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2917LogFile "MONDO_SHARE = $MONDO_SHARE"
2918LogFile "MINDI_LIB = $MINDI_LIB"
2919LogFile "MINDI_SBIN = $MINDI_SBIN"
2920LogFile "MINDI_CONF = $MINDI_CONF"
2921# Purge from potential old run
2922if [ _"$MINDI_CACHE" = _"" ]; then
2923    Die "MINDI_CACHE undefined"
2924else
2925    LogFile "MINDI_CACHE = $MINDI_CACHE"
2926fi
2927
2928if [ -f $MINDI_CONFIG ]; then
2929    LogFile "-----------------------------"
2930    LogFile " Mindi configuration file    "
2931    LogFile "-----------------------------"
2932    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2933    LogFile "-----------------------------"
2934fi
2935LogFile "In Mindi"
2936LogFile "--------"
2937LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2938LogFile "BOOT_SIZE = $BOOT_SIZE"
2939LogFile "--------"
2940
2941trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2942
2943# Sanity checks
2944which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2945which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2946which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2947which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2948if which awk &> /dev/null ; then
2949    if ! which gawk &> /dev/null ; then
2950        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2951    fi
2952fi
2953which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2954[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2955
2956[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2957
2958# Update the PATH variable if incomplete
2959if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2960    PATH=$PATH:/sbin:/usr/sbin
2961    export PATH
2962    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2963    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2964    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2965fi
2966
2967if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2968    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2969fi
2970
2971### TODO
2972### Fix as it's not mandatory on ia64
2973if [ "$ARCH" = "ia64" ] ; then
2974    if which elilo &> /dev/null ; then
2975        LILO_EXE=elilo
2976    else
2977        LILO_EXE=`which false 2> /dev/null`
2978    fi
2979else
2980    FindIsolinuxBinary
2981fi
2982trap "Aborted" SIGTERM
2983DONE="\r\t\t\t\t\t\t\t\tDone.         "
2984kernelpath=""
2985MONDO_ROOT=/var/cache/mondo
2986mkdir -p $MONDO_ROOT
2987
2988if [ -d "/proc/lvm" ]; then
2989    # LVM v1
2990    LVMCMD=""
2991    LVM="v1"
2992elif [ -d "/dev/mapper" ]; then
2993    # LVM v2
2994    LVMCMD="lvm"
2995    LVM="v2"
2996else
2997    LVM="false"
2998fi
2999
3000if [ -e "/proc/cmdline" ]; then
3001    CMDLINE="/proc/cmdline"
3002elif [ -e "/tmp/cmdline" ]; then
3003    CMDLINE="/tmp/cmdline"
3004else
3005    CMDLINE="/dev/null"
3006fi
3007
3008LogFile "INFO: LVM set to $LVM"
3009LogFile "----------"
3010LogFile "mount result:"
3011LogFile "-------------"
3012mount >> $LOGFILE
3013if [ -e "/etc/raidtab" ]; then
3014    LogFile "-------------"
3015    LogFile "/etc/raidtab content:"
3016    LogFile "-------------"
3017    cat /etc/raidtab >> $LOGFILE
3018else
3019    LogFile "No file /etc/raidtab"
3020fi
3021if [ -e "/etc/mdadm.conf" ]; then
3022    LogFile "-------------"
3023    LogFile "/etc/mdadm.conf content:"
3024    LogFile "-------------"
3025    cat /etc/mdadm.conf >> $LOGFILE
3026else
3027    LogFile "-------------"
3028    LogFile "No file /etc/mdadm.conf"
3029fi
3030LogFile "-------------"
3031LogFile "cat $CMDLINE"
3032LogFile "-------------"
3033cat $CMDLINE >> $LOGFILE
3034LogFile "-------------"
3035LogFile "cat /proc/swaps:"
3036LogFile "-------------"
3037cat /proc/swaps >> $LOGFILE
3038LogFile "-------------"
3039if [ -e "/proc/mdstat" ]; then
3040    LogFile "cat /proc/mdstat:"
3041    LogFile "-------------"
3042    cat /proc/mdstat >> $LOGFILE
3043else
3044    LogFile "No pseudo file /proc/mdstat"
3045fi
3046LogFile "-------------"
3047LogFile "cat /proc/partitions:"
3048LogFile "-------------"
3049cat /proc/partitions >> $LOGFILE
3050LogFile "-------------"
3051LogFile "cat /proc/filesystems:"
3052LogFile "-------------"
3053cat /proc/filesystems >> $LOGFILE
3054LogFile "-------------"
3055LogFile "lsmod result:"
3056LogFile "-------------"
3057lsmod >> $LOGFILE
3058MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3059if [ -x /usr/sbin/esxcfg-module ]; then
3060    LogFile "-------------"
3061    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3062    LogFile "-------------"
3063    LogFile "VMWare modules"
3064    LogFile "-------------"
3065    /usr/sbin/esxcfg-module -l >> $LOGFILE
3066    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3067fi
3068LogFile "-------------" 
3069LogFile "FORCE_MODS:"
3070LogFile "-------------"
3071LogFile "$FORCE_MODS"
3072LogFile "-------------"
3073LogFile "DENY_MODS:"
3074LogFile "-------------"
3075LogFile "$DENY_MODS"
3076LogFile "-------------"
3077LogFile "df result:"
3078LogFile "----------"
3079df -aT >> $LOGFILE
3080LogFile "-------------"
3081LogFile "df -i result:"
3082LogFile "----------"
3083df -i >> $LOGFILE
3084LogFile "-------------"
3085if [ -r /boot/grub/menu.lst ]; then
3086    LogFile "-------------"
3087    LogFile "INFO: /boot/grub/menu.lst content"
3088    LogFile "-------------"
3089    cat /boot/grub/menu.lst >> $LOGFILE
3090    LogFile "-------------"
3091fi
3092if [ -r /boot/grub/grub.conf ]; then
3093    LogFile "-------------"
3094    LogFile "INFO: /boot/grub/grub.conf content"
3095    LogFile "-------------"
3096    cat /boot/grub/grub.conf >> $LOGFILE
3097    LogFile "-------------"
3098fi
3099if [ -r /boot/grub/grub.cfg ]; then
3100    LogFile "-------------"
3101    LogFile "INFO: /boot/grub/grub.cfg content"
3102    LogFile "-------------"
3103    cat /boot/grub/grub.cfg >> $LOGFILE
3104    LogFile "-------------"
3105fi
3106if [ -r /boot/grub/device.map ]; then
3107    LogFile "-------------"
3108    LogFile "INFO: /boot/grub/device.map content"
3109    LogFile "-------------"
3110    cat /boot/grub/device.map >> $LOGFILE
3111    LogFile "-------------"
3112fi
3113if [ -r /etc/lilo.conf ]; then
3114    LogFile "-------------"
3115    LogFile "INFO: /etc/lilo.conf content"
3116    LogFile "-------------"
3117    cat /etc/lilo.conf >> $LOGFILE
3118fi
3119if [ -d /boot/efi ]; then
3120    gcf=`find /boot/efi -name 'grub.c*'`
3121    if [ _"$gcf" = _"" ]; then
3122        LogFile "Found a /boot/efi directory without a grub config file in it"
3123    else
3124        LogFile "-------------"
3125        LogFile "INFO: $gcf content"
3126        LogFile "-------------"
3127        cat $gcf >> $LOGFILE
3128        LogFile "-------------"
3129    fi
3130fi
3131
3132LogFile "Full fdisk info"
3133LogFile "---------------"
3134$FDISK -l >> $LOGFILE
3135LogFile "----------------"
3136
3137# Compute libata version
3138laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3139# If libata v2 is used then remove ide-generic as it will perturbate boot
3140if [ "`echo $MODULES | grep libata`" ]; then
3141    if [ "$laver" = "2" ]; then
3142        DENY_MODS="$DENY_MODS ide-generic"
3143        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3144        LogFile "-------------"
3145    fi
3146fi
3147
3148# Check for McAfee which disturbs the access to some files (tgz in articular)
3149if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3150    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3151    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3152    LogFile "WARNING: You have two options:"
3153    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3154    LogFile "WARNING:  - Disable the scanner during the backup"
3155fi
3156
3157# Check for ISO_CMD command
3158if [ ! -x $ISO_CMD ]; then
3159    LogFile "NOTE: No CD image (ISO file) utility found"
3160fi
3161
3162FLOPPY_WAS_MOUNTED=""
3163for mtpt in /media/floppy /mnt/floppy /floppy ; do
3164    if mount | grep -w $mtpt &> /dev/null ; then
3165        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3166        umount $mtpt
3167    fi
3168done
3169
3170#
3171# If we have a USB device we need to store info
3172# and remove it from the parameters line
3173#
3174if [ "$#" -ne "0" ] ; then
3175    if [ "$1" = "--usb" ] ; then
3176        shift
3177        USBDEVICE=$1
3178        if [ _"$USBDEVICE" = _"" ]; then
3179            Die "No USB device specified"
3180        fi
3181        shift
3182    fi
3183fi
3184
3185if [ "$#" -ne "0" ] ; then
3186    if [ "$1" = "--findkernel" ] ; then
3187        resk=`TryToFindKernelPath`
3188        # Avoids logfile content for mondo
3189        export MONDO_SHARE=""
3190        if [ "$resk" = "" ] ; then
3191            if [ $KERNEL_IS_XEN = "yes" ]; then
3192                echo "$xenkernelpath"
3193                LogFile "INFO: xenkernelpath = $xenkernelpath"
3194                MindiExit 0
3195            else
3196                MindiExit -1
3197            fi
3198        else
3199            echo "$resk"
3200            LogFile "INFO: kernelpath = $resk"
3201            MindiExit 0
3202        fi
3203    elif [ "$1" = "--locatedeps" ] ; then
3204        [ ! "$2" ] && Die "Please specify the binary to look at"
3205        LocateDeps $*
3206        # Avoids logfile content for mondo
3207        export MONDO_SHARE=""
3208        MindiExit $?
3209    elif [ "$1" = "--readalllink" ] ; then
3210        [ ! "$2" ] && Die "Please specify the binary to look at"
3211        # Avoids logfile content for mondo
3212        export MONDO_SHARE=""
3213        mr-read-all-link $2
3214        MindiExit $?
3215    elif [ "$1" = "--makemessage" ] ; then
3216        MakeMessageFile | cut -c1-80
3217        MindiExit 0
3218    elif [ "$1" = "--makemountlist" ] ; then
3219        [ ! "$2" ] && Die "Please specify the output file"
3220        MakeMountlist $2
3221        CheckMountlist $2
3222        # Avoids logfile content for mondo
3223        export MONDO_SHARE=""
3224        MindiExit $?
3225    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3226        echo "Mindi v$MINDI_VERSION"
3227        # Avoids logfile content for mondo
3228        export MONDO_SHARE=""
3229        MindiExit 0
3230    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3231        MONDO_TMP=$2
3232        # Change MINDI_TMP for the one provided by mondo
3233        # So that it can get back the built files
3234        if [ _"$MONDO_TMP" = _"" ]; then
3235            Die "MONDO_TMP is empty, aborting"
3236        fi
3237        if [ _"$MONDO_TMP" = _"/" ]; then
3238            Die "MONDO_TMP is /, aborting"
3239        fi
3240        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3241        rmdir $MINDI_TMP
3242        export MINDI_TMP=$MONDO_TMP
3243        mkdir -p $MINDI_TMP
3244
3245        # This is the scratch dir in mondo - subdir images
3246        MINDI_CACHE=$3
3247        LogFile "MINDI_CACHE = $MINDI_CACHE"
3248
3249        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3250        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3251       
3252###
3253### Sq-Modification...
3254### Attempt to locate kernel specific module path
3255### if module path is found then use it other wise use uname -r to set it...
3256###
3257        if [ $KERNEL_IS_XEN = "yes" ]; then
3258            LogAll "INFO: xenkernelpath = $xenkernelpath"
3259        fi
3260        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3261        if [ ! -d "/lib/modules/$kernelname" ]; then
3262           LogAll "WARNING: Module path for ${kernelpath} not found..."
3263           LogAll "         using running kernel\'s modules."
3264           kernelname=$KERVERRUN
3265        else
3266           LogAll "INFO: Using modules for kernel: ${kernelname}"
3267        fi
3268        LogAll "INFO: kernelname = $kernelname"
3269        LogAll "INFO: kernelpath = $kernelpath"
3270###
3271### end of Sq-Modification
3272###
3273        TAPEDEV=$5
3274        TAPESIZE=$6
3275        FILES_IN_FILELIST=$7
3276        USE_LZO=$8
3277        CDRECOVERY=$9
3278        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3279            IMAGE_DEVS=""
3280        else
3281            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3282        fi
3283        if [ "${11}" ] ; then
3284            LILO_OPTIONS=""
3285    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3286        fi
3287        LAST_FILELIST_NUMBER=${12}
3288        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3289        export MINDI_EXCLUDE_DEVS="${14}"
3290        USE_COMP="${15}"
3291        USE_LILO="${16}"
3292        USE_STAR="${17}"
3293        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3294        DIFFERENTIAL="${19}"
3295        USE_GZIP="${20}"
3296        USE_LZMA="${21}"
3297        NOT_BOOT="${22}"
3298        BOOT_TYPE="${23}"
3299        [ "$USE_COMP" = "" ] && USE_COMP=yes
3300        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3301        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3302        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3303        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3304        # MONDO_ROOT is the real scratchdir
3305        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3306        if [ _"$MONDO_ROOT" != _"" ]; then
3307            mkdir -p $MONDO_ROOT
3308        else
3309            Die "MONDO_ROOT is undefined"
3310        fi
3311    else
3312        LogScreen "Syntax: mindi (--custom ....)"
3313        MindiExit -1
3314    fi
3315fi
3316
3317if [ _"$MINDI_CACHE" != _"" ]; then
3318    rm -rf $MINDI_CACHE/* 2> /dev/null
3319    mkdir -p $MINDI_CACHE
3320fi
3321
3322[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3323
3324if [ _"$MONDO_SHARE" = _"" ]; then
3325    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3326    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3327    LogIt "BusyBox sources are available from http://www.busybox.net"
3328    LogIt "------------------------------------------------------------------------------"
3329else
3330    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3331fi
3332if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3333    LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3334else
3335    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3336    MindiExit -1
3337fi
3338
3339for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3340    modinfo $i 2> /dev/null 1> /dev/null
3341    if [ $? -eq 0 ]; then
3342        modprobe $i 2>&1 > /dev/null
3343    fi
3344done
3345
3346LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3347LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3348LogFile "NOT_BOOT = '$NOT_BOOT'"
3349if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3350    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3351    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3352    MakeMountlist $MINDI_TMP/mountlist.txt
3353    CheckMountlist $MINDI_TMP/mountlist.txt
3354    mkdir -p $MINDI_TMP/small-all/tmp
3355    cd "$MINDI_TMP/small-all"
3356    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3357    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3358    sleep 2
3359    LogIt "Done. Exiting."
3360    MindiExit 0
3361fi
3362
3363if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3364    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3365fi
3366
3367if [ "$kernelpath" = "" ] ; then
3368    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3369    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3370    read ch
3371    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3372        USE_OWN_KERNEL="yes"
3373    else
3374        USE_OWN_KERNEL="no"
3375    fi
3376    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3377        kernelpath=`TryToFindKernelPath`
3378        if [ "$kernelpath" = "" ] ; then
3379            echo -n "Please enter kernel path : "
3380            read kernelpath
3381        fi
3382    fi
3383fi
3384
3385echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3386[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3387
3388mountpoint=$MINDI_TMP/mountpoint.$$
3389PrepareDataDiskImages
3390
3391export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3392
3393LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3394PrepareBootDiskImage $kernelpath || Die "Failed to create boot disk image."
3395
3396[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3397...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3398
3399if [ _"$MONDO_SHARE" = _"" ]; then
3400    ListImagesForUser
3401    OfferToMakeBootableISO
3402    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3403        OfferToMakeBootableUSB
3404    fi
3405    LogAll "Finished."
3406elif [ "$TAPEDEV" ] ; then
3407    if [ "$ARCH" != "ia64" ] ; then
3408        # We need to keep the img file as boot file for ia64 platform
3409        rm -f $MINDI_CACHE/{*img,*iso}
3410    else
3411        rm -f $MINDI_CACHE/*iso
3412    fi
3413    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3414        OfferToMakeBootableUSB
3415    fi
3416    OfferToMakeBootableISO
3417    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3418        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3419    else
3420        Die "Cannot find all.tar.gz, to be written to tape"
3421    fi
3422elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3423    OfferToMakeBootableUSB
3424else
3425    OfferToMakeBootableISO
3426fi
3427
3428if [ -f $MINDI_TMP/$MRCFG ]; then
3429    LogFile "INFO: Your $MRCFG file is:"
3430    LogFile "--------------------------"
3431    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3432    LogFile "--------------------------"
3433else
3434    if [ _"$MONDO_SHARE" != _"" ] ; then
3435        LogIt "ERROR: You don't have a $MRCFG file !"
3436    fi
3437fi
3438# cleanup
3439LogAll "INFO: $FRIENDLY_OUTSTRING"
3440for mtpt in $FLOPPY_WAS_MOUNTED ; do
3441    mount $mtpt
3442done
3443MindiExit 0
Note: See TracBrowser for help on using the repository browser.