source: branches/3.2/mindi/mindi @ 3474

Last change on this file since 3474 was 3474, checked in by bruno, 3 years ago

Fix #779 by adding the hid-generic module

  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 120.3 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3474 2015-10-06 22:50:50Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000      # increase if you run out of ramdisk space
44BOOT_SIZE=86000         # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47    # Ask if you want to make a CD Image to be written?
48    # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51    # Ask if you want to make a USB Image to be written?
52    # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55    # If set to "no", you will be prompted for whether or not
56    # you want to use your own kernel, or the supplied default.
57    # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60    # If set to "no", the kernel is not a Xen kernel
61    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63 
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mpt2sas mpt3sas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr virtio_scsi vmw_pvscsi"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio virtio_blk virtio_pci hv_storvsc"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic hid-generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 enic forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp rpcsec_gss_krb5"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80LOGFILE=/var/log/mindi.log
81BOOT_MEDIA_MESSAGE="\
82To format and restore all files automatically, type '0enuke07' <enter>.\n\
83To restore some/all files interactively, type '0einteractive07' <enter>.\n\
84To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
85To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
86\n\
87You may add one or more parameters as well as per the function keys below\n\
88e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
89\n\
90If restoring from a local external disk or USB key, do not connect it \n\
91until the boot-up has finished.\n\
92\n\
93\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
94"
95FDISK=$MINDI_SBIN/mr-parted2fdisk
96
97# Using a config file allow to overwrite some values
98MINDI_CONFIG="$MINDI_CONF/mindi.conf"
99if [ -f $MINDI_CONFIG ]; then
100    . $MINDI_CONFIG
101fi
102DEPLIST_FILE="$MINDI_CONF/deplist.txt"
103DEPLIST_DIR="$MINDI_CONF/deplist.d"
104
105ISO_CMD="/usr/bin/mkisofs"
106ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
107
108# Mindi set this as default in case it's invoked alone
109BOOT_TYPE="BIOS"
110# and we also check whether we're UEFI or not.
111if [ -d "/sys/firmware/efi" ]; then
112    BOOT_TYPE="UEFI"
113    ISO_OPT="$ISO_OPT -eltorito-alt-boot -e images/mindi-bootroot.img -no-emul-boot"
114else
115    # Find MBR in case of bootable USB device to build
116    MBRFILE=/usr/lib/syslinux/mbr.bin
117    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
118    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
119    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
120    [ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
121fi
122
123# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
124# However, they use exactly the same command line parameters, so just
125# use genisoimage if it's available.
126if [ ! -x $ISO_CMD ]; then
127    ISO_CMD=/usr/bin/genisoimage
128fi
129
130
131# Function to log on screen only
132LogScreen() {
133        if [ -e /dev/stderr ] ; then
134        echo -e "$1" >> /dev/stderr
135    elif [ -e /usr/bin/logger ] ; then
136        /usr/bin/logger -s $1
137    fi
138}
139
140# Function to log in log file only
141LogFile() {
142
143    echo -e "$1" >> $LOGFILE
144    if [ _"$2" != _"" ]; then
145        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
146        rm -f "$2"
147    fi
148}
149
150# Function to log in both screen and logfile
151LogAll() {
152    LogScreen "$1"
153    LogFile "$1" "$2"
154}
155
156# Preserved for compatibility
157LogIt() {
158    LogAll "$1" "$2"
159}
160
161# Last function called before exiting
162# Parameter is exit code value
163# Should be declared here as used immediately below potentialy
164MindiExit() {
165    LogFile "Mindi $MINDI_VERSION is exiting" 
166    LogFile "End date : `date`" 
167    if [ _"$MONDO_SHARE" != _"" ] ; then
168        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
169        if [ -f $LOGFILE ]; then
170            cat $LOGFILE >> /var/log/mondoarchive.log
171        else
172            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
173        fi
174        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
175    fi
176
177    cd /
178    sync&
179
180    # Clean temporary files only when standalone mindi
181    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
182        rm -Rf $MINDI_TMP
183    fi
184    exit $1
185}
186
187Die() {
188    local i
189    if [ "$1" = "" ] ; then
190        LogAll "FATAL ERROR"
191    else
192        LogAll "FATAL ERROR. $1"
193    fi
194    if [ _"$2" != _"" ]; then
195        grep -Ev "tar: Removing [a-z ]*\`/\'" "$2" >> $LOGFILE
196    fi
197    rm -f "$2"
198
199    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
200    LogAll "See http://www.mondorescue.org for more information."
201    LogAll "WE CANNOT HELP unless you enclose that file.\n"
202    MindiExit -1
203}
204
205# Now we can create what we need
206MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
207if [ $? -ne 0 ]; then
208    df $TMPDIR
209    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
210fi
211if [ _"$MINDI_TMP" = _"" ]; then
212    Die "MINDI_TMP is empty, aborting"
213fi
214if [ _"$MINDI_TMP" = _"/" ]; then
215    Die "MINDI_TMP is /, aborting"
216fi
217export MINDI_TMP
218
219# ----------------------------------------------------------------------------
220
221
222AbortHere() {
223    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
224    Die "Program is terminating in response to signal received from OS/user"
225}
226
227
228Aborted() {
229    trap SIGHUP SIGTERM SIGTRAP SIGINT
230    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
231    Die "User abort."
232}
233
234
235AddFileToCfgIfExists() {
236    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
237}
238
239
240AddKeyboardMappingFile() {
241    local mappath r included_list included_item i res ii sss
242    mappath=$1
243    KBDEPTH=$(($KBDEPTH+1))
244    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
245    if [ -e "$bigdir/$mappath" ] ; then
246        LogFile "INFO: $mappath already added"
247        return
248    elif [ -d "$bigdir/$mappath" ] ; then
249        echo "Cannot add $mappath: it's a directory. Sorry."
250        return
251    fi
252    LogFile "INFO: Added kbd map $mappath"
253    if [ ! -e "$mappath" ] ; then
254        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
255        if [ ! -e "$mappath" ] ; then
256            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
257            return
258        fi
259    else
260        echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
261    fi
262
263    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
264    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
265        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
266    else
267        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
268    fi
269    for included_item in $included_list ; do
270        if [ ! -e "$included_item" ] ; then
271            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
272            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
273            for ii in $sss ; do
274                [ -e "$ii" ] && AddKeyboardMappingFile $ii
275            done
276        else
277            AddKeyboardMappingFile $included_item
278        fi
279    done
280}
281
282
283CopyDependenciesToDirectory() {
284    local outdir incoming counter d found tdir templog
285    outdir=$1
286    templog=$MINDI_TMP/$$.log
287    mkdir -p $outdir
288    incoming=`ReadLine`
289    counter=0
290    > $templog
291
292    while [ "$incoming" != "" ] ; do
293        # Non absolute file names should not arrive till here => skipped
294        if [ `echo "$incoming" | cut -c1` != '/' ]; then
295            LogAll "WARNING: Unable to handle $incoming"
296            incoming=`ReadLine`
297            continue
298        fi
299        # no parent directory of incoming should be a link, copy is not possible in that case
300        d=`dirname "$incoming"`
301        found="false"
302        while [ $d != "/" -a $found = "false" ]; do
303            [ -h "$d" ] && found="true"
304            d=`dirname "$d"`
305        done
306        if [ -d "$incoming" -a ! -h "$incoming" ]; then
307            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
308        elif [ -e "$incoming" ] && [ $found = "false" ]; then
309            if [ ! -h "$incoming" ]; then
310                tar cf - -C / $incoming 2> $templog | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $templog
311            else
312                tdir=`dirname "$incoming"`
313                if [ ! -e "$outdir/$tdir" ]; then
314                    mkdir -p "$outdir/$tdir"
315                fi
316                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
317            fi
318            # Only uncompress modules if not using udevd
319            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
320                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
321            fi
322            [ -x "$outdir" ] && StripExecutable $outdir
323            counter=$(($counter+1))
324            LogProgress $counter $2
325        fi
326        incoming=`ReadLine`
327    done
328}
329
330
331CountItemsIn() {
332    local r
333    r=0
334    for q in $1 ; do
335        r=$(($r+1))
336    done
337    echo $r
338}
339
340
341DropOptimizedLibraries() {
342    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
343    filelist=$1
344    outdir=$2
345
346    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
347    if [ "$list_of_optimized_libraries" = "" ] ; then
348        return 0
349    fi
350    echo -en "Dropping i686-optimized libraries if appropriate"
351    for optimized_lib_name in $list_of_optimized_libraries ; do
352        echo -en "."
353        reason=""
354        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355        echo "$vanilla_lib_name" >> $filelist
356        LogFile "INFO: Adding $vanilla_lib_name to filelist"
357        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
358        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
359
360        # This may return multiple files
361        for resolved in `mr-read-all-link $vanilla_lib_name`; do
362            LogFile "INFO: Adding as deps $resolved to filelist"
363            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
364            if [ "$vanilla_resolved_name" != "$resolved" ]; then
365                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
366                rmdir $outdir$resolved > /dev/null 2> /dev/null
367                ln -sf $vanilla_resolved_name $outdir$resolved
368                LogFile "INFO: Excluding deps $resolved" 
369                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
370                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
371                echo "$vanilla_resolved_name" >> $filelist.tmp
372                mv -f $filelist.tmp $filelist
373            fi
374        done
375    done
376    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
377    mv -f $filelist.tmp $filelist
378    echo -e "$DONE"
379}
380
381
382FindAndAddUserKeyboardMappingFile() {
383    local r res mapfile mappath included_item included_list keyfile mp locale
384    LogAll "INFO: Analyzing your keyboard's configuration."
385    KEYDIR=/usr/lib/kbd
386    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
387    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
388    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
389    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
390    if [ ! -e "$KEYDIR" ] ; then
391        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
392        return 0
393    fi
394    if [ -e "/etc/sysconfig/keyboard" ] ; then
395        LogFile "INFO: Red Hat-style config detected."
396        keyfile=/etc/sysconfig/keyboard
397    elif [ -e "/etc/vconsole.conf" ] ; then
398        LogFile "INFO: New Fedora style config detected."
399        keyfile=/etc/vconsole.conf
400    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
401        LogFile "INFO: Slackware-style config detected."
402        keyfile=/etc/rc.d/rc.keymap
403    elif [ -e "/etc/rc.config" ] ; then
404        LogFile "INFO: Debian-style config detected."
405        keyfile=/etc/rc.config
406    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
407        LogFile "INFO: Debian-style config detected."
408        mkdir -p $bigdir/tmp
409        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
410        KBDEPTH=0
411        mkdir -p $bigdir/etc/console
412        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
413        echo ""
414        echo -e "$DONE"
415        return 0
416    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
417        LogFile "INFO: Ubuntu-style config detected."
418        mkdir -p $bigdir/tmp
419        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
420            kbdfile="/etc/console-setup/boottime.kmap.gz"
421        else
422            kbdfile="/etc/console-setup/cached.kmap.gz"
423        fi
424        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
425        KBDEPTH=0
426        mkdir -p $bigdir/etc/console-setup
427        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
428        echo ""
429        echo -e "$DONE"
430        return 0
431    elif [ -e "/etc/rc.conf" ] ; then
432        LogFile "INFO: ArchLinux config detected."
433        keyfile=/etc/rc.conf
434    elif [ -e "/etc/conf.d/keymaps" ] ; then
435        LogFile "INFO: Gentoo-style config detected."
436        keyfile=/etc/conf.d/keymaps
437    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
438        LogFile "INFO: X11-style config detected."
439        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
440    else
441        LogFile "Searching for rc.config ..."
442        keyfile=`find /etc -name rc.config | head -n1`
443        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
444            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
445            return
446        else
447            LogFile "INFO: Found $keyfile"
448        fi
449    fi
450    if [ ! -e "$KEYDIR/keymaps" ] ; then
451        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
452        return
453    fi
454    LogFile "INFO: keyfile=$keyfile"
455    # For SLES we need to remove the .map.gz extension Cf #614
456    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
457    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
458    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
459    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
460    LogFile "INFO: locale=$locale"
461    #
462    # Process the keymaps dir once for all
463    # AddKeyboardMappingFile will use it recursively
464    #
465    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
466    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
467    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
468    # If we have multiple keymaps then log it !!
469    echo "$mp" | grep -q " " >> $LOGFILE
470    if [ $? -eq 0 ]; then
471        LogAll "WARNING: Multiple keymaps found: $mp"
472        LogFile "INFO: The following one will be used"
473    fi
474    for i in $mp ; do
475        mappath=$i
476        [ -e "$i" ] && [ ! -d "$i" ] && break
477    done
478    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
479        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
480    fi
481    LogFile "INFO: mappath = $mappath"
482    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
483        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
484        return
485    fi
486    LogAll "INFO: Adding the following keyboard mapping tables: "
487    mkdir -p $bigdir/tmp
488    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
489    KBDEPTH=0
490    AddKeyboardMappingFile $mappath
491    echo ""
492    echo -e "$DONE"
493    rm -f $MINDI_TMP/keymaps.find
494    return 0
495}
496
497
498FindLdlinux32Binary() {
499    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
500    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
501    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
502    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
503    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
504    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
505    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
506    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
507    if [ ! -e "$LDLINUXC32" ]; then 
508        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
509        LDLINUXC32=/tmp/idoesnthopefullyexist
510    else
511        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
512    fi
513}
514
515
516FindMboot32Binary() {
517    MBOOTC32=/usr/lib/syslinux/mboot.c32
518    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
519    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
520    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
521    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
522    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
523    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
524    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
525    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
526    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
527}
528
529FindIsolinuxBinary() {
530    ISOLINUX=/usr/lib/isolinux.bin
531    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
532    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
533    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
534    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
535    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
536    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
537    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
538    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
539    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
540}
541
542
543GenerateGiantDependencyList() {
544    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
545
546    echo -en "Analyzing dependency requirements"
547    outfile=$1
548    tempfile=$MINDI_TMP/$$.txt
549    incoming=`ReadLine`
550
551    > $tempfile
552    progress=0
553    res=0
554    noof_lines=$2
555    while [ "$incoming" != "" ] ; do
556        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
557            incoming=`ReadLine`
558            continue
559        fi
560        if [ "$incoming" = "LVMFILES:" ] ; then
561            break
562        fi
563        filelist=`GenerateListForFile "$incoming"`
564        r=$?
565        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
566        res=$(($res+$r))
567#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
568        for fname in $filelist ; do
569            [ "$fname" != "" ] && echo "$fname" >> $tempfile
570        done
571        progress=$(($progress+1))
572        LogProgress $progress $noof_lines
573        incoming=`ReadLine`
574    done
575    if  [ "$incoming" = "LVMFILES:" ] ; then
576        incoming=`ReadLine`
577        lvmversion=""
578        while [ "$incoming" != "" ] ; do
579            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
580                incoming=`ReadLine`
581                continue
582            fi
583            filelist=`GenerateListForFile "$incoming"`
584            for tool in $filelist ; do
585                lvmresolved=`readlink -f $tool`
586                if [ "$tool" = "$lvmresolved" ]; then
587                    echo "$tool" >> $tempfile
588                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
589                    if [ "$lvmversion" = "" ] ; then
590                        lvmversion=`$lvmresolved`
591                        echo "$lvmresolved" >> $tempfile
592                    fi
593                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
594                    if [ "$lvmversion" = "200" ]; then
595                        # pvdata and lvmcreate_initrd don't exist in LVM2
596                        case "$toolstripped" in
597                        "pvdata")
598                            continue
599                            ;;
600                        "lvmcreate_initrd")
601                            continue
602                            ;;
603                        esac
604                    fi
605                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
606                    if [ -e "$toolpath" ] ; then
607                        echo "$toolpath" >> $tempfile
608                        echo "$tool" >> $tempfile
609                    else
610                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
611                    fi
612                    if [ -e "$toolpath" ] ; then
613                        echo "$toolpath" >> $tempfile
614                        echo "$tool" >> $tempfile
615                    else
616                        echo "Where are your LVM-Tools? Couldn't find $tool"
617                    fi
618                else
619                    echo "$tool" >> $tempfile
620                fi
621            done
622            progress=$(($progress+1))
623            LogProgress $progress $noof_lines
624            incoming=`ReadLine`
625        done
626    fi
627    echo -en "$DONE\nMaking complete dependency list"
628
629    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
630    mv -f $tempfile.new $tempfile
631    > $outfile.pre
632    progress=0
633    noof_lines=`cat $tempfile | wc -l`
634    LogFile "---------------------------------"
635    LogFile "List of dependencies:             "
636    LogFile "---------------------------------"
637    for fname in `cat $tempfile` ; do
638        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
639        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
640        progress=$(($progress+1))
641        LogProgress $progress $noof_lines
642    done
643    if [ _"$MONDO_SHARE" != _"" ]; then
644        mkdir -p $bigdir/tmp
645        mkdir -p $bigdir/usr/bin
646        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
647            LogAll "\nINFO: Incorporating post-nuke tarball"
648            old_pwd=`pwd`
649            cd "$bigdir"
650            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
651            cd "$old_pwd"
652        fi
653        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
654            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
655        else
656            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
657            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
658            LogIt "       If Mindi was called by Mondo then send a bug report."
659            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
660            LogIt "       Finally, run Mindi again."
661            Die "Odd."
662        fi
663        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
664        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
665            LogAll "\nINFO: Incorporating Network-related settings"
666            for r in NETFS-* ; do
667                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
668                LogFile "INFO: Copying $r to ramdisk"
669            done
670        fi
671    fi
672    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
673    rm -f $tempfile $outfile.pre
674    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
675    return $res
676}
677
678
679GenerateListForFile() {
680    local files_found loc fname incoming i res
681    incoming="$1"
682    files_found=""
683    res=0
684
685    for fname in $incoming ; do
686        files_found="$files_found `LocateFile $fname`"
687    done
688
689    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
690}
691
692
693# Returns all disk devices which are part of a raid array
694GetAllRaidMembers() {
695    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
696}
697
698
699GetFileSizeList() {
700    local i
701    for i in `find $1 -type d -o -print` ; do
702        du -sk $i
703    done
704}
705
706
707# Check kernel filesystem capabilites for accessing initrd image
708# Could be ext2 FS (old mode) or initramfs (new mode)
709#
710# Interface definition:
711# param #1: absolute path to kernel image
712GetInitrdFilesystemToUse() {
713
714    # interface test: make sure we have one parameter
715    if [ $# -ne 1 ]; then
716        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
717    fi
718
719    # interface parameters
720    local lvKernelImage=$1
721
722    # local constants (filesystem magic strings)
723    local lcMagicCramfs="<3>cramfs: wrong magic"
724    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
725    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
726    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
727
728    # local variables
729    local lvOffset
730    local lvScanRes
731    local lvUseFilesystem
732
733    # say where we are.
734    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
735
736    # verify that file exists
737    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
738
739    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
740    file $lvKernelImage 2>&1 | grep -q gzip
741    if [ $? -eq 0 ]; then
742        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
743        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
744    else
745        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
746        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
747        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
748        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
749        if [ $lvOffset -eq 0 ]; then
750            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
751            lvScanRes=$lcMagicInitfs
752        else
753            lvOffset=`expr $lvOffset / 2`
754            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
755            # scan again  kernel image
756            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
757        fi
758    fi
759
760    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
761    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
762        lvUseFilesystem="ext2fs"
763    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
764        lvUseFilesystem="ext3fs"
765    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
766        lvUseFilesystem="initramfs"
767    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
768        lvUseFilesystem="cramfs"
769    else
770        # In that case, we are most probably after 2.6.30 and use the supported initramfs
771        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
772        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
773        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
774        lvUseFilesystem="initramfs"
775    fi
776
777    # say what we are using
778    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
779
780    # return file system to use
781    echo "$lvUseFilesystem"
782
783}
784
785# Searches members of raid device
786# $1: raid device (/dev/md...)
787GetRaidDevMembers() {
788    if [ ! -f /etc/raidtab ]; then 
789        return
790    fi
791    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
792}
793
794
795ListAllPartitions() {
796    local res currline partition all_partitions ap_orig remaining i j
797
798    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
799    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
800    if [ -e "/vmfs/volumes" ]; then
801        # For VMWare ESX 3 get the device names of these volumes
802        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
803    fi
804    return
805}
806
807
808ListImagesForUser() {
809    local path fname
810    path=$MINDI_CACHE
811    echo -en "In the directory '$path' you will find the images:-\n"
812    for fname in `ls $path | grep -F mindi-` ; do
813        printf "%19s " $fname
814    done
815    echo " "
816}
817
818
819ListKernelModulePaths() {
820    local module_list module fname r kern
821    module_list="$MODULES"
822    # Remove unwanted modules from list
823    for i in $DENY_MODS; do
824        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
825    done
826###
827### Sq-Modification ... Use kernelname for module search path if specified
828###
829    if [ "${kernelname}" != "" ]
830    then
831        kern=${kernelname}
832    else
833        kern="$KERVERRUN"
834    fi
835    export KERVER=$kern
836###
837### Sq-Mod End
838###
839    # Get rid of duplicates
840    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
841        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
842        if [ -z "$r" ]; then
843            if [ "`echo "$MODULES" | grep -w $module`" ]; then
844                r="[live module file not found]"
845            else
846                r="[extra module file not found]"
847            fi
848        else
849            [ -f "$r" ] && echo "$r"
850        fi
851        LogFile "INFO: module $module --> $r"
852    done
853    find /lib/modules/$kern/modules.* -type f 2> /dev/null
854}
855
856#
857# Critical function which computes all dependencies (dyn. lib.)
858# for a list of binaries
859#
860LocateDeps() {
861    local incoming fname deps
862    incoming="$*"
863    deps=""
864
865    for fname in $incoming ; do
866        if [ ! -e "$fname" ] ; then
867            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
868            if echo $fname | grep lvm &> /dev/null ; then
869                LogFile "          This warning only affects you if you are using LVM."
870                if echo "$MODULES" | grep lvm &> /dev/null ; then
871                    LogFile "          I think you are, so please take heed!"
872                else
873                    LogFile "          I don't think you are, so don't worry about it."
874                fi
875            fi
876        else
877            deps="$deps $fname" 
878        fi
879    done
880    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
881}
882
883
884LocateFile() {
885    local i j path fname_to_find location output resolved tmp stub cache_id loclist
886    fname_to_find="$1"
887    # It's an absolute path
888    j=`echo "$fname_to_find" | cut -c1`
889    if [ _"$j" = _"/" ]; then
890        dn=`dirname $fname_to_find`
891        # We suppose that the link is already included, just add the new file
892        if [ -h "$dn" ]; then
893            newdn=`readlink -f $dn`
894            bn=`basename $fname_to_find`
895            output="$newdn/$bn"
896        else
897            output="$fname_to_find"
898        fi
899        if [ -h "$output" ] ; then
900            output="`mr-read-all-link $output` $output"
901        fi
902        echo "$output"
903        return 0
904    fi
905    # It's not an absolute path
906    output=""
907    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
908    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
909        [ -h "$path" ] && continue
910        [ ! -e "$path/$fname_to_find" ] && continue
911        output="$path/$fname_to_find $output"
912        if [ -h "$path/$fname_to_find" ] ; then
913            output="`mr-read-all-link $path/$fname_to_find` $output"
914        fi
915    done
916    if [ "$output" = "" ] ; then
917        return 1
918    fi
919    echo "$output"
920    return 0
921}
922
923LogProgress() {
924    local i progress modres noof_lines title
925 
926    progress=$1
927    noof_lines=$2
928    title=$3
929
930    i=$(($progress*100))
931    if [ $noof_lines -ne 0 ]; then
932        i=$(($i/$noof_lines))
933    else
934        i=0
935    fi
936
937    if [ _"$MONDO_SHARE" != _"" ]; then 
938        echo "$title        $i%"
939    else
940        echo -en "\r\t\t\t\t\t\t\t\t"
941        echo -en "$i"
942        echo -en "%"
943        modres=$(($progress%4))
944        [ "$modres" -eq "0" ] && echo -en "\t/"
945        [ "$modres" -eq "1" ] && echo -en "\t-"
946        [ "$modres" -eq "2" ] && echo -en "\t\\"
947        [ "$modres" -eq "3" ] && echo -en "\t|"
948    fi
949}
950
951# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
952MakeMondoConfigFile() {
953    local outfile use_lzo use_comp use_star
954    outfile=$1
955    > $outfile
956    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
957    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
958    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
959    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
960    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
961    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
962    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
963    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
964    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
965    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
966    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
967    echo "use-lzo $use_lzo" >> $outfile
968    echo "use-gzip $use_gzip" >> $outfile
969    echo "use-star $use_star" >> $outfile
970    echo "use-lzma $use_lzma" >> $outfile
971    echo "use-comp $use_comp" >> $outfile
972    echo "boot-type $BOOT_TYPE" >> $outfile
973    echo "datestamp `date`" >> $outfile
974    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
975    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
976    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
977    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
978    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
979    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
980    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
981    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
982    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
983    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
984    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
985    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
986    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
987    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
988
989    # Deal with network configuration in a portable way
990    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
991        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
992    fi
993}
994
995# Get PV's for an LV
996GetPVsForLV() {
997    if [ -n "$1" ]; then
998        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
999        if [ -z "$vg" ]; then
1000            return
1001        fi
1002        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1003    fi
1004}
1005
1006
1007MakeMountlist() {
1008    local mountlist all_partitions current_partition \
1009partition_size partition_format outstring partition_number \
1010partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1011absolute_partition old_partition_fmt current_lvolume uname skip
1012
1013    LogFile "------------------------------------"
1014    LogFile "Your raw fstab file looks like this:"
1015    LogFile "------------------------------------"
1016    cat $MY_FSTAB >> $LOGFILE
1017    LogAll "-----------------------------------"
1018    LogAll "Your mountlist will look like this:"
1019    LogAll "-----------------------------------"
1020
1021# mountlist(OUT)
1022    mountlist=$1
1023
1024# NB: partition = device
1025# NB: mountpt = where the device is mounted
1026
1027    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1028
1029    [ "$mountlist" != "" ] && rm -Rf $mountlist
1030    > $mountlist
1031    all_partitions=""
1032   
1033    if [ $LVM != "false" ]; then
1034        LogAll "INFO: Analyzing LVM..."
1035        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1036        if [ $? -ne 0 ]; then
1037            LVM="false"
1038        fi
1039        # Excluded LVs and GVs are not reported here
1040        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1041    fi
1042    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1043    for i in $IMAGE_DEVS ; do
1044        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1045    done
1046    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1047    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1048    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1049    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1050    for c_p in $all_partitions ; do
1051        # Skip fd/cd devices, network FS, cifs
1052        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1053        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1054        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1055            current_partition=`readlink -f $c_p`
1056            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1057                current_partition="$c_p"
1058            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1059                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1060                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1061            fi
1062            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1063        else
1064            current_partition="$c_p"
1065        fi
1066        [ "$c_p" = "none" ] && continue
1067        redhat_label=""
1068        label=""
1069        uuid=""
1070        absolute_partition=`readlink -f $c_p`
1071        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1072
1073        # set default in case we dont't find it
1074        str_to_find_fmt_with=$current_partition
1075
1076        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1077        # current_partition contains only first column of /etc/fstab
1078        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1079            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1080            actual_dev=""
1081
1082            # 1st try, findfs - the RHEL way of finding labels and their partitions
1083            if [ -x "/sbin/findfs" ]; then
1084                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1085            fi
1086   
1087            # 2nd try : blkid, the good way for all LABEL except swap
1088            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1089                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1090                # For LVM FS it will give a /dev/dm-# which should then be converted
1091                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1092                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1093                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1094                    for dev in `ls /dev/mapper/*`; do
1095                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1096                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1097                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1098                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1099                            break
1100                        fi
1101                    done
1102                fi
1103            fi
1104   
1105            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1106            # For LVM gives a /dev/mapper entry
1107            if [ "x$actual_dev" = "x" ]; then
1108                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1109            fi
1110   
1111            # 4th try, with vol_id
1112            # SWAP only
1113            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1114                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1115                for dev_swap in $list_swaps ; do
1116                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1117                    if [ "x$dev_exists" != "x" ]; then
1118                        actual_dev=$dev_swap
1119                        break;
1120                    fi
1121                done
1122            fi
1123
1124            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1125            # LABEL=SW-cciss/c0d0p3 (RDP)
1126            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1127            # SWAP only
1128            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1129                    skip=""
1130                    uname=$KERVERRUN
1131                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1132                    # 2.6.12 needs 16 (FC3)
1133                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1134                    # 2.6.19 and upper needs 1052
1135                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1136                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1137                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1138                    if [ $skip = "" ]; then
1139                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1140                    fi
1141                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1142                    do
1143                        # Location of the swap label for kernel 2.6
1144                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1145                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1146                            actual_dev=$try_dev
1147                        fi
1148                    done
1149            fi
1150
1151            # Check if one of all those tries has known success
1152            if [ "x$actual_dev" != "x" ]; then
1153                current_partition=$actual_dev
1154            else
1155                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1156            fi
1157        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1158        # current_partition contains only first column of /etc/fstab
1159        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1160            uuid=`echo "$current_partition" | cut -d'=' -f2`
1161            actual_dev=""
1162
1163            # 1st try, findfs - the RHEL way of finding labels and their partitions
1164            if [ -x "/sbin/findfs" ]; then
1165                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1166            fi
1167   
1168            # 2nd try : blkid, the good way for all UUID except swap
1169            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1170                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1171                # For LVM FS it will give a /dev/dm-# which should then be converted
1172                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1173                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1174                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1175                    for dev in `ls /dev/mapper/*`; do
1176                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1177                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1178                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1179                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1180                            break
1181                        fi
1182                    done
1183                fi
1184            fi
1185   
1186            # 3th try, with vol_id
1187            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1188                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1189                for dev in $list_dev ; do
1190                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1191                    if [ "x$dev_exists" != "x" ]; then
1192                        actual_dev=$dev
1193                        break;
1194                    fi
1195                done
1196            fi
1197
1198            # 4th try, with dumpuuid (VMWare only ?) for swap
1199            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1200                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1201                for dev in $list_dev ; do
1202                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1203                    if [ "x$dev_exists" != "x" ]; then
1204                        actual_dev=$dev
1205                        break;
1206                    fi
1207                done
1208            fi
1209
1210            # Check if one of all those tries has known success
1211            if [ "x$actual_dev" != "x" ]; then
1212                current_partition=$actual_dev
1213            else
1214                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1215            fi
1216        else
1217            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1218            # they use symlinks in fstab unrelated to what is shown in mount !
1219            if [ _"$partition_mountpt" = _"" ]; then
1220                # set default in case we dont't find it
1221                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1222                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1223                            str_to_find_fmt_with=$tmpp
1224                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1225                            break;
1226                        fi
1227                done
1228            fi
1229        fi
1230
1231        # Detects noauto partitions not mounted and exclude them
1232        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1233        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1234                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1235            continue
1236        fi
1237        # Detects bind partitions and exclude them
1238        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1239                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1240            continue
1241        fi
1242
1243        # Look for devices which have to be excluded
1244        skip=0
1245        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1246            l=""
1247            list_of_devices="`mr-read-all-link $current_partition`"
1248            for d in $list_of_devices; do
1249                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1250            done
1251
1252            # Remove PVs from LVs excluded
1253            l="$l `GetPVsForLV $current_partition`"
1254
1255            # We want a single unique list
1256            list_of_devices="`echo $l | sort -u`"
1257
1258            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1259                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1260                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1261                    skip=1
1262                    continue
1263                fi
1264            done
1265        fi
1266        if [ $skip -eq 1 ]; then
1267            continue
1268        fi
1269
1270        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1271        # Detects iso9660 ISO images and exclude them
1272        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1273                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1274            continue
1275        fi
1276        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1277        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1278        # the former is then a link to the latter, so we test whether
1279        # $current_partition is actually such a link or not and set
1280        # $current_lvolume accordingly. On Debian you may find more than one answer
1281        # so we remove the one corresponding to /dev/.static
1282        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1283        # principle is the same and we need to find the link to it as well.
1284        # Note that $current_lvolume may well be an
1285        # ordinary device. It is just to make sure that we feed the right value
1286        # into any of the LVM tools if possible.
1287
1288        current_lvolume="$current_partition"
1289        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1290            # .static dir are a Debian specificity
1291            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1292            echo $current_lvolume | grep -q ' '
1293            if [ $? -eq 0 ]; then
1294                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1295            fi
1296            # if it's not found, it may well be a real device such as a multipath one
1297            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1298            if [ _"$current_lvolume" = _"" ]; then
1299                current_lvolume="$current_partition"
1300            fi
1301        fi
1302        #
1303        # End of LVM device style variation code (other than $current_lvolume).
1304
1305        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1306            # Size computed via LVM not directly
1307            partition_size="lvm"
1308        else
1309            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1310            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1311            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1312                # Skip swap files
1313                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1314                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1315                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1316                [ "$partition_format" != "swap" ] && partition_format="swap"
1317                if [ "$partition_size" = "" ] ; then
1318                    totalsize=0
1319                    items=0
1320                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1321                        totalsize=$(($totalsize+$i))
1322                        items=$(($items+1))
1323                    done
1324                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1325                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1326                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1327                fi
1328            else
1329                partition_size=`SizeOfPartition $current_partition`
1330            fi
1331        fi
1332        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1333        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1334        if [ "$partition_mountpt" = "" ] ; then
1335            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1336                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1337                    partition_mountpt="raid"
1338                    partition_format="raid"
1339                else
1340                    partition_mountpt="lvm"
1341                    partition_format="lvm"
1342                fi
1343            fi
1344        fi
1345        psz=$partition_size
1346        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1347        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1348        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1349            partition_mountpt="image"
1350            old_partition_fmt=$partition_format
1351            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1352            partition_size=$(($partition_size+1)); # just in case
1353            if [ "$partition_format" = "Linux" ] ; then
1354                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1355                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1356                partition_format=$old_partition_fmt
1357            fi
1358        fi
1359
1360        if [ ! "$partition_mountpt" ] ; then
1361            LogFile "------- $FDISK -l $qq log ------------"
1362            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1363                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1364                [ "$partition_format" ] && break
1365            done
1366            LogFile "------- $FDISK log end ------------"
1367            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1368                partition_format="compaq"
1369            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1370                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1371                continue
1372            fi
1373        fi
1374        if [ "$redhat_label" ]; then
1375            label="$redhat_label"
1376        elif [ "$uuid" ]; then
1377            label="$uuid"
1378        fi
1379
1380        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1381        # in order to mount the root part e.g. in grub.
1382        # One way to solve this is to add the UUID now, if there wasn't one so it's
1383        # restored correctly
1384        if [ _"$label" = _"" ]; then
1385            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1386        fi
1387
1388        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1389        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1390        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1391        if [ "$current_partition" = "" ] ; then
1392            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1393        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1394            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1395                partition_mountpt=raid
1396                partition_format=raid
1397                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1398                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1399            else
1400                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1401            fi
1402        elif [ "$partition_format" = "" ] ; then
1403            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1404        elif [ "$partition_size" = "" ] ; then
1405            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1406        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1407            continue
1408        else
1409            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1410                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1411                partition_format="vfat"
1412            fi
1413            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1414            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1415        fi
1416    done
1417    LogAll "-----------------------------------" 
1418}
1419
1420CheckMountlist() {
1421    local file=$1
1422    # Coherency verification
1423    ML01=`cat $file | wc -l`
1424    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1425    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1426    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1427    if [ "$ML01" -ne "$ML1" ]; then
1428        LogFile "--------------------------------------------"
1429        LogAll "WARNING: Duplicate device entry in mountlist"
1430        LogFile "--------------------------------------------"
1431    fi
1432    if [ "$ML02" -ne "$ML2" ]; then
1433        LogFile "--------------------------------------------"
1434        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1435        LogFile "------------------------------------------------"
1436    fi
1437}
1438
1439OfferToMakeBootableISO() {
1440    local i old_pwd files
1441    if [ -z "$ISO_CMD" ]; then
1442        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1443        return
1444    fi
1445    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1446        echo -en "Shall I make a bootable CD image? (y/[n]) "
1447        read i
1448        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1449    fi
1450    rm -Rf $MINDI_TMP/iso
1451    mkdir -p $MINDI_TMP/iso/{images,archives}
1452    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1453    cp -f $files $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy files to $MINDI_TMP/iso/images"
1454    for i in memdisk memtest.bin memtest.img ; do
1455        j=$MINDI_LIB/$i
1456        k=$MINDI_TMP/iso
1457        if [ -e "$j" ] ; then
1458            LogAll "INFO: Copying $j to $k"
1459            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1460            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1461            if [ _"$MONDO_SHARE" != _"" ]; then 
1462                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1463            fi
1464        fi
1465    done
1466    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1467    if [ $KERNEL_IS_XEN = "yes" ]; then
1468        FindMboot32Binary
1469        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1470        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1471    fi
1472    # Useful for syslinux 5.x
1473    FindLdlinux32Binary
1474    if [ -e $LDLINUXC32 ]; then
1475        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1476    fi
1477    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1478    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1479
1480    if [ _"$MONDO_SHARE" != _"" ]; then 
1481        if [ $KERNEL_IS_XEN = "yes" ]; then
1482            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1483            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1484        fi
1485        if [ -e $LDLINUXC32 ]; then
1486            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1487        fi
1488        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1489        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1490    fi
1491    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1492    if [ "$ARCH" != "ia64" ] ; then
1493        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1494    fi
1495
1496    # copy boot stuff now generated in PrepareDataDiskImage
1497    if [ "$BOOT_TYPE" = "UEFI" ]; then
1498        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1499        tbc="EFI"
1500    else
1501        (cd $MINDI_TMP/iso ; tar xfz $MINDI_CACHE/all.tar.gz ./boot)
1502        tbc="boot"
1503    fi
1504
1505    old_pwd=`pwd`
1506    cd "$MINDI_TMP/iso"
1507    if [ "$ARCH" != "ia64" ] ; then
1508        if [ _"$MONDO_SHARE" != _"" ]; then 
1509            cp -rf $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt,$tbc} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1510            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1511                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1512            fi
1513            if [ $KERNEL_IS_XEN = "yes" ]; then
1514                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1515            fi
1516            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1517        fi
1518        CMD="$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table ."
1519    else
1520        CMD="$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.img -c images/boot.cat -no-emul-boot ."
1521    fi
1522    LogFile "Invoking $CMD"
1523    $CMD > /dev/null 2> $MINDI_TMP/mkisofs.log
1524    if [ "$?" -ne "0" ] ; then
1525        LogFile "----------- $ISO_CMD's errors --------------"
1526        LogAll "$ISO_CMD returned the following errors:"
1527        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1528        LogAll "ERROR: Failed to create ISO image."
1529    else
1530        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1531    fi
1532    rm -f $MINDI_TMP/mkisofs.log
1533    cd "$old_pwd"
1534}
1535
1536
1537OfferToMakeBootableUSB() {
1538    local i files
1539    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1540        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1541        read i
1542        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1543        if [ "$USBDEVICE" = "" ]; then
1544            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1545            read dev
1546            USBDEVICE=$dev
1547        fi
1548        echo "WARNING: This will erase all content on $USBDEVICE"
1549        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1550        read i
1551        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1552    fi
1553    rm -Rf $MINDI_TMP/usb
1554    mkdir -p $MINDI_TMP/usb
1555    USBPART="${USBDEVICE}1"
1556
1557    echo -en "Transforming $USBDEVICE in a Bootable device " 
1558    echo -en "."
1559    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1560    LogFile "INFO: Checking $USBDEVICE"
1561    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1562    if [ $? -ne 0 ]; then
1563        LogAll "ERROR: Unable to access $USBDEVICE"
1564        LogAll "       Make sure your USB device is plugged in"
1565        MindiExit -1
1566    fi
1567    echo -en "."
1568    # Some distro do auto mount at that point (Ubuntu)
1569    LogFile "INFO: Unmounting $USBPART just in case"
1570    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1571    if [ "$BOOT_TYPE" = "BIOS" ]; then
1572        # If your key has no MBR it may cause an issue
1573        # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1574        if [ -r $MBRFILE ]; then
1575            LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1576            dd if=$MBRFILE of=$USBDEVICE
1577        else
1578            LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1579            LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1580        fi
1581    fi
1582    LogFile "INFO: Preparing $USBDEVICE"
1583    cat > $MINDI_TMP/fdisk.txt << EOF
1584d
1585d
1586d
1587d
1588n
1589p
15901
1591
1592
1593t
1594b
1595a
15961
1597w
1598EOF
1599    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1600    if [ $? -ne 0 ]; then
1601        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1602        LogAll "       Make sure your USB device is plugged in"
1603        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1604        MindiExit -1
1605    fi
1606    LogFile "fdisk build file"
1607    LogFile "----------------"
1608    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1609    LogFile "----------------"
1610    rm -f $MINDI_TMP/fdisk.txt
1611    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1612    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1613    echo -en "."
1614    # Calling kpartx in case devices were not created
1615    if [ -x "/sbin/kpartx" ]; then
1616        /sbin/kpartx -a $USBDEVICE
1617    fi
1618    # Some distro do auto mount at that point (Ubuntu)
1619    LogFile "INFO: Unmounting $USBPART just in case again"
1620    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1621    echo -en "."
1622    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1623    if [ "`which dmsetup`" != "" ]; then
1624        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1625        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1626            LogFile "INFO: Removing $block_id from device mapper."
1627            sleep 1
1628            dmsetup remove $block_id
1629        fi
1630    fi
1631    echo -en "."
1632    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1633    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1634    if [ $? -ne 0 ]; then
1635        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1636        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1637        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1638        MindiExit -1
1639    fi
1640    echo -en "."
1641    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1642    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1643    if [ $? -ne 0 ]; then
1644        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1645        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1646        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1647        MindiExit -1
1648    fi
1649    echo -en "."
1650    mkdir -p $MINDI_TMP/usb/images
1651    files=`ls $MINDI_CACHE/{*.gz,*.img}`
1652    cp -f $files $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy files to $MINDI_TMP/usb/images"
1653    echo -en "."
1654    for i in memdisk memtest.bin memtest.img ; do
1655        j=$MINDI_LIB/$i
1656        k=$MINDI_TMP/usb
1657        if [ -e "$j" ] ; then
1658            LogFile "INFO: Copying $j to $k"
1659            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1660            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1661        fi
1662    done
1663    echo -en "."
1664    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1665    echo -en "."
1666    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1667    echo -en "."
1668    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1669    echo -en "."
1670    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1671    echo -en "."
1672    LogAll "----------- syslinux's conf --------------"
1673    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1674    LogAll "------------------------------------------"
1675    umount $MINDI_TMP/usb
1676    if [ "$ARCH" != "ia64" ] ; then
1677        syslinux -v 2>&1 | grep -q 4.02
1678        if [ $? -eq 0 ]; then
1679            # This buggy version of syslinux requires a call to --stupid and not -s
1680            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1681            res=$?
1682        else
1683            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1684            res=$?
1685        fi
1686        if [ $res -ne 0 ] ; then
1687            LogAll "----------- syslinux's errors --------------"
1688            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1689            LogAll "------------------------------------------"
1690            LogIt "ERROR: Failed to create USB image."
1691        else
1692            echo -e "$DONE"
1693            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1694        fi
1695        rm -f $MINDI_TMP/syslinux.log
1696    else
1697        LogAll "ERROR: No USB boot support for ia64"
1698        MindiExit -1
1699    fi
1700}
1701
1702
1703MakeMessageFile() {
1704   
1705    if [ -x "/bin/lsb_release" ]; then
1706        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1707    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1708        DESC="Arch Linux"
1709        if [ -r /var/log/pacman.log ]; then
1710            # there are no releases but we can get the last system upgrade
1711            # Output example:   Arch Linux [2011-03-03 01:39]
1712            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1713        fi
1714    elif [ -x "/etc/os-release" ]; then
1715        DESC=`grep PRETTY_NAME /etc/os-release | cut -d= -f2`
1716    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1717        # For pb >= 0.9.8
1718        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4 | sed 's/,/-/g'`
1719    elif [ -r /etc/issue.net ]; then
1720        DESC=`head -1 /etc/issue.net`
1721    elif [ -r /etc/issue ]; then
1722        DESC=`head -1 /etc/issue`
1723    else
1724        DESC="Unknown desc"
1725    fi
1726    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1727    if [ _"$MONDO_SHARE" != _"" ]; then
1728        if [ "$CDRECOVERY" != "yes" ] ; then
1729            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1730                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1731                echo -en "$BOOT_MEDIA_MESSAGE"
1732            elif [ ! "$MINDI_TMP" ] ; then
1733                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1734                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1735                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1736                fi
1737            else
1738                echo -en "$BOOT_MEDIA_MESSAGE"
1739            fi
1740        else
1741            echo -en "\
1742To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1743CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1744        fi
1745    fi
1746
1747    # Also create the other help screens
1748    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1749    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1750    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1751}
1752
1753
1754MakeBootConfFile() {
1755    local options i ooo
1756    options=""
1757    # Type of boot file (elilo or syslinux/isolinux)
1758    type=$1
1759    if [ "$type" = "elilo" ]; then
1760        sep="="
1761        sepdef="="
1762    else
1763        sep=" "
1764        sepdef=" "
1765        if [ "$type" = "grub" ]; then
1766            sepdef="="
1767        fi
1768    fi
1769
1770    # Generic header for conf file
1771    if [ "$type" = "elilo" ]; then
1772        echo -en "prompt\n"
1773    elif [ "$type" = "grub" ]; then
1774        echo -en "pause Press a key when ready to restore\n"
1775    else
1776        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1777    fi
1778
1779    # Compute which default option to boot from
1780    echo -en "default${sepdef}"
1781    if [ "$CDRECOVERY" = "yes" ] ; then
1782        if [ "$type" = "grub" ]; then
1783            # TODO: Which num ???
1784            echo -en "0\n"
1785        else
1786            echo -en "RESTORE\n"
1787        fi
1788    # In case it's mondoarchive
1789    elif [ _"$MONDO_SHARE" != _"" ]; then
1790        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1791            if [ "$type" = "grub" ]; then
1792                echo -en "3\n"
1793            else
1794                echo -en "iso\n"
1795            fi
1796        else
1797            if [ "$type" = "grub" ]; then
1798                echo -en "1\n"
1799            else
1800                echo -en "${MINDI_DEFAULT_BOOT_OPTION}\n"
1801            fi
1802        fi
1803    else
1804        if [ "$type" = "grub" ]; then
1805            echo -en "0\n"
1806        else
1807            echo -en "expert\n"
1808        fi
1809    fi
1810
1811    # Handle timeout
1812    if [ "$CDRECOVERY" != "yes" ] ; then
1813        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1814    else
1815        echo -en "timeout${sep}10000\n"
1816    fi
1817    echo -en "\n"
1818
1819    # prepare which labels will be generated
1820    if [ "$CDRECOVERY" = "yes" ] ; then
1821        options="RESTORE expert"
1822    else
1823        if [ _"$MONDO_SHARE" != _"" ]; then
1824            options="interactive expert compare iso nuke isonuke"
1825        else
1826            options="expert"
1827        fi
1828    fi
1829
1830    # Generate rest of conf file
1831    for i in $options ; do
1832        ooo=$i
1833        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1834        if [ "$type" = "elilo" ]; then
1835            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1836        elif [ "$type" = "grub" ]; then
1837            outstr="title $i\n\tkernel /vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n\tinitrd=/initrd.img\n"
1838        else
1839            ps="/"
1840            if [ "$type" = "syslinux" ]; then
1841                ps=""
1842            fi
1843            if [ $KERNEL_IS_XEN = "no" ]; then
1844                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1845            else
1846                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1847            fi
1848        fi
1849        echo -en "$outstr"
1850    done
1851    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1852        if [ "$type" = "elilo" ]; then
1853            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1854            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1855        elif [ "$type" = "grub" ]; then
1856            echo -en "title memtest\n\tkernel /memtest.efi\n\tinitrd=/memtest.img\n"
1857        else
1858            ps="/"
1859            if [ "$type" = "syslinux" ]; then
1860                ps=""
1861            fi
1862            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1863            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1864        fi
1865    fi
1866}
1867
1868PrepareBootDiskImage() {
1869    # LILO originally
1870    local dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf bootimage
1871    kernelpath=$1
1872    retval=0
1873
1874    old_pwd=`pwd`
1875    [ ! -e "$kernelpath" ] && Die "PBDI - cannot find $kernelpath kernel"
1876    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1877    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1878    echo -en "..."
1879    imagefile=$MINDI_TMP/mindi-bootroot.img
1880    mkdir -p $mountpoint
1881    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1882    LogFile "INFO: Creating vfat filesystem on $imagefile"
1883    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1884    if [ "$BOOT_TYPE" = "BIOS" ]; then
1885        # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1886        syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1887    fi
1888
1889    # Only move it now to its final destination and use it now
1890    mv $imagefile $MINDI_CACHE
1891    imagefile=$MINDI_CACHE/mindi-bootroot.img
1892
1893    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1894
1895    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1896    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1897    if [ "$?" -ne "0" ] ; then
1898        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1899        LogAll "       Please unload some of your modules and try again."
1900        LogAll "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1901        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1902        retval=$(($retval+1))
1903    fi
1904    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1905
1906    mkdir -p $mountpoint/tmp
1907    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1908        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1909    fi
1910
1911    # copy the kernel across
1912    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1913    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1914    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1915
1916    retval=0
1917    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1918    retval=$?
1919    if [ $KERNEL_IS_XEN = "yes" ]; then
1920        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1921        let retval+=$?
1922    fi
1923 
1924    if [ "$retval" -ne "0" ] ; then
1925        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1926        du -sk $mountpoint/* >> $LOGFILE
1927        LogFile "--- end of list of files ---"
1928        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1929        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1930        cd "$old_pwd"
1931        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1932        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1933        [ "$imagefile" != "" ] && rm -f $imagefile
1934        LogIt "ERROR: Sorry, your kernel is too big for your image"
1935        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1936    fi
1937    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1938    LogFile "INFO: Free space left on image = $free_space KB"
1939    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1940
1941    # make it bootable
1942    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1943    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1944
1945    # copy boot stuff now generated in PrepareDataDiskImage
1946    if [ "$BOOT_TYPE" = "UEFI" ]; then
1947        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
1948    else
1949        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./boot)
1950    fi
1951
1952    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1953    echo -en "..."
1954    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1955
1956    if [ "$retval" -eq "0" ] ; then
1957        echo -en "...$DONE\n"
1958        LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1959    else
1960        echo -en "...failed\n"
1961        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1962    fi
1963    #[ "$imagefile" != "" ] && rm -f $imagefile
1964    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning $retval"
1965    return $retval
1966}
1967
1968ParseModprobeForIncludes() {
1969local MODPROBE_CONF mpincfile includes include
1970
1971MODPROBE_CONF=/etc/modprobe.conf
1972mpincfile=$1
1973touch $mpincfile
1974if [ -a $MODPROBE_CONF ]; then
1975    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
1976    if [ -n "$includes" ]; then
1977        for include in $includes
1978        do
1979            if [ -a "$include" ]; then
1980                echo $include >> $mpincfile
1981            fi
1982        done
1983    fi
1984fi
1985}
1986
1987
1988PrepareDataDiskImages() {
1989    local needlist bigdir diskdir res i j k old_pwd lines lfiles includefile
1990
1991    rm -f $MINDI_CACHE/mindi.iso
1992    needlist=$MINDI_TMP/what-we-need.txt
1993    bigdir=$MINDI_TMP/bigdir
1994    mkdir -p $bigdir/usr/bin
1995    mkdir -p $bigdir/usr/sbin
1996    includefile=$MINDI_TMP/$$.includefile.txt
1997
1998    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
1999    if [ -e "$DEPLIST_FILE" ]; then
2000        lfiles="$DEPLIST_FILE $lfiles"
2001    fi
2002    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2003    ParseModprobeForIncludes $includefile
2004    lines=$(($lines+`cat $includefile | wc -l`))
2005    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2006    res=$?
2007    rm -f $includefile
2008    ListKernelModulePaths >> $needlist
2009    if [ "$res" -ne "0" ] ; then
2010        Die "You have $res files present in dependency list\nbut absent from filesystem."
2011    fi
2012    mkdir -p $bigdir/tmp
2013    if [ _"$MONDO_SHARE" != _"" ]; then
2014        # TODO: no reason to have the cfg file stored twice
2015        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2016        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2017    fi
2018
2019    # Needs to be done after the MRCFG creation
2020    FindAndAddUserKeyboardMappingFile
2021
2022    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2023    DropOptimizedLibraries $needlist $bigdir
2024    echo -en "Assembling dependency files"
2025
2026    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2027
2028    # also copy io.sys and msdos.sys, if we can find them
2029    for i in `mount | cut -d' ' -f3` ; do
2030        for j in io.sys msdos.sys ; do
2031            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2032        done
2033    done
2034
2035    # master boot record, too
2036    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2037    if [ "$i" ] && [ "$BOOT_TYPE" = "BIOS" ]; then
2038        LogAll "INFO: Backing up $i's MBR"
2039        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2040        sleep 1
2041        sync
2042        j=$i
2043        [ -h "$j" ] && j=`readlink -f $j`
2044        LogAll "INFO: Creating /dev/boot_device ($j)"
2045        mkdir -p $bigdir/dev
2046        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2047    fi
2048
2049    old_pwd=`pwd`
2050    cd "$bigdir"
2051
2052    # Get terminfo content
2053    ti="usr/share/terminfo/l"
2054    if [ -d /$ti ]; then
2055        mkdir -p $ti
2056        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2057    fi
2058    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2059        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2060        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2061    fi
2062    if [ -d "/lib/dev-state" ]; then 
2063        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2064    fi
2065    cd "$old_pwd"
2066    echo -e "$DONE"
2067    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2068    MakeMountlist $MINDI_TMP/mountlist.txt
2069    CheckMountlist $MINDI_TMP/mountlist.txt
2070    mkdir -p $bigdir/tmp
2071    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2072    if [ _"$MONDO_SHARE" != _"" ]; then
2073        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2074    fi
2075    if [ $LVM != "false" ]; then
2076        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2077        if [ "$?" -ne "0" ]; then
2078            LVM="false"
2079            rm -f $bigdir/tmp/i-want-my-lvm
2080        else
2081            LogFile "Your i-want-my-lvm file content is:"
2082            LogFile "-----------------------------------"
2083            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2084            LogFile "-----------------------------------"
2085        fi
2086    fi
2087    LogFile "Your mountlist.txt file content is:"
2088    LogFile "-----------------------------------"
2089    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2090    LogFile "-----------------------------------"
2091
2092    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2093    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2094    if [ _"$MONDO_SHARE" != _"" ]; then
2095        for q in filelist.full.gz biggielist.txt ; do
2096            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2097            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2098        done
2099    fi
2100
2101    # copy (e)lilo/syslinux/grub/whatever stuff into it as well
2102    # to get it on the media (in addition to the boot part
2103    # and also to support UEFI boot mechanism
2104    bootdir=$bigdir/boot
2105    mkdir -p $bootdir
2106    if [ "$BOOT_TYPE" != "BIOS" ]; then
2107        if [ "$BOOT_TYPE" = "UNKNOWN" ]; then
2108            LogAll "ERROR: UNKNOWN BOOT_TYPE. Please report upstream"
2109            MindiExit -1
2110        fi
2111        # EFI or UEFI
2112        # TODO: names are hard-coded for now
2113        if [ "$BOOT_TYPE" = "UEFI" ]; then
2114            # UEFI
2115            lilodir=$bigdir/EFI/BOOT
2116            mkdir -p $lilodir
2117            liloconf="$lilodir/grub.conf"
2118            # grub.efi for rhel6 and grubx64.efi for rhel7
2119            lilobin="grub*.efi"
2120           
2121            MakeBootConfFile grub > $liloconf
2122        else
2123            # EFI
2124            lilodir=$bootdir
2125            mkdir -p $lilodir
2126            liloconf="$lilodir/elilo.conf"
2127            lilobin="elilo.efi"
2128
2129            MakeBootConfFile elilo > $liloconf
2130        fi
2131
2132        # Copy it so that CD-ROM menu entry is satisfied
2133        mountefi=0
2134        df -T | grep /boot/efi | grep -qE 'vfat'
2135        if [ $? -ne 0 ]; then
2136            mount /boot/efi
2137            if [ $? -ne 0 ]; then
2138                echo "You have to mount your (U)EFI partition when using mindi"
2139                MindiExit -1
2140            fi
2141            mountefi=1
2142        fi
2143        el=`find /boot/efi -iname "$lilobin"`
2144        cp $el $lilodir
2145        if [ $mountefi -eq 1 ]; then
2146            umount /boot/efi 2>&1 > /dev/null
2147        fi
2148    else
2149        MakeBootConfFile isolinux > $bootdir/syslinux.cfg
2150    fi
2151
2152    echo -en "Tarring and zipping the data content..."
2153    size_of_all_tools=`du -sk $bigdir | cut -f1`
2154    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $MINDI_CACHE/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2155    LogFile "Size of the data content"
2156    LogFile "------------------------"
2157    du -sk $MINDI_CACHE/*gz >> $LOGFILE
2158    LogFile "------------------------"
2159    echo -e "$DONE"
2160
2161    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2162    rm -rf $bigdir
2163    rm -f $needlist
2164}
2165
2166
2167Prompt() {
2168    echo -en "$1"
2169    read line
2170}
2171
2172
2173ReadLine() {
2174    local i incoming
2175    read incoming
2176    i=0
2177    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2178        i=$(($i+1))
2179        read incoming
2180    done
2181    echo "$incoming"
2182}
2183
2184
2185SizeOfPartition() {
2186    local devpath drive res stub
2187    device=$1
2188    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2189        Die "Cannot find $device's size - is your /etc/fstab sane?"
2190    fi
2191    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2192        res=`SizeOfRaidPartition $device`
2193        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2194        echo "$res"
2195        return 0
2196    fi
2197    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2198    res=`$FDISK -s $device 2>> $LOGFILE`
2199    # end patch
2200    # take only the first in case of multiple mount (cifs, nfs, ...)
2201    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2202    [ "$res" = "" ] && res="-1"
2203    echo $res
2204    return 0
2205}
2206
2207
2208SizeOfRaidPartition() {
2209    local real_dev smallest_size silly tmp
2210
2211    silly=999999999
2212    smallest_size=$silly
2213
2214    for real_dev in `GetRaidDevMembers $1` ; do
2215        tmp=`SizeOfPartition $real_dev`
2216        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2217    done
2218
2219    if [ "$smallest_size" = "$silly" ] ; then
2220        echo "-1"
2221        return 1
2222    else
2223        echo "$smallest_size"
2224        return 0
2225    fi
2226}
2227
2228
2229StripExecutable()
2230{
2231    local tmpfile
2232
2233    tmpfile=$MINDI_TMP/stripped.$$.dat
2234    [ -d "$1" ] || [ -h "$1" ] && return
2235    cp -f $1 $tmpfile 2>> $LOGFILE
2236    strip $tmpfile 2> /dev/null
2237    if [ "$?" -eq "0" ] ; then
2238        cp -f $tmpfile $1 2>> $LOGFILE
2239        LogFile "INFO: Stripped binary $2"
2240    fi
2241    rm -f $tmpfile
2242}
2243
2244KernelVer() {
2245        local fkern_ver fname
2246
2247        fname=$1
2248        file $fname | grep -q gzip
2249        if [ "$?" -eq "0" ] ; then
2250            # Used by ia64
2251            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2252        else
2253            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2254        fi
2255        echo "$fkern_ver"
2256}
2257
2258
2259# WARNING: This function should just echo the final result !!!
2260#
2261TryToFindKernelPath() {
2262    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2263
2264    we_want_version=$KERVERRUN
2265    possible_kernels=""
2266    duff_kernels=""
2267    output=""
2268
2269    if [ "$ARCH" = "ia64" ] ; then
2270       root="/boot/efi/efi"
2271    else
2272       root="/"
2273    fi
2274    # See if we're booted from a Xen kernel
2275    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2276    if [ -f /proc/xen/capabilities ]; then
2277        # It's a Xen kernel
2278        KERNEL_IS_XEN="yes"
2279        LogFile "INFO: It's a Xen kernel..."
2280    fi
2281
2282    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2283        [ ! -e "$fname" ] && continue
2284        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2285        fkern_ver=`KernelVer $fname`
2286        [ "$fkern_ver" = "" ] && continue
2287        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2288        [ -f "$fname" ] || continue
2289        [ -h "$fname" ] && continue
2290        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2291        file $fname | grep -q gzip
2292        if [ "$?" -eq "0" ] ; then
2293            # Used by ia64
2294            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2295                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2296                duff_kernels="$fname $duff_kernels"
2297            else
2298                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2299                possible_kernels="$fname $possible_kernels"
2300            fi
2301        else
2302            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2303                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2304                duff_kernels="$fname $duff_kernels"
2305            else
2306                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2307                possible_kernels="$fname $possible_kernels"
2308            fi
2309        fi
2310    done
2311    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2312        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2313    fi
2314    if [ ! "$possible_kernels" ] ; then
2315        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2316        possible_kernels="$duff_kernels"
2317        if [ ! "$possible_kernels" ] ; then
2318            LogAll "INFO: Sorry, no duff kernels either"
2319        else
2320            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2321            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2322        fi
2323    fi
2324    if [ $KERNEL_IS_XEN = "yes" ]; then
2325        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2326        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2327    fi
2328    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2329    noof_kernels=`CountItemsIn "$possible_kernels"`
2330    if [ "$noof_kernels" -eq "0" ] ; then
2331        LogAll "Could not find your kernel."
2332        if [ -e "/boot/vmlinuz" ] ; then
2333            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2334            output=/boot/vmlinuz
2335        else
2336            output=""
2337        fi
2338    elif [ "$noof_kernels" -eq "1" ] ; then
2339        kp=`echo "$possible_kernels" | sed s/' '//`
2340        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2341        output="$kp"
2342    else
2343        for i in $possible_kernels ; do
2344            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2345                LogAll "INFO: OK, I used my initiative and found that "
2346                LogAll "INFO: $i is probably your kernel. "
2347                output="$i"
2348                break
2349            fi
2350        done
2351        if [ ! -n "$output" ]; then
2352            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2353                output=/boot/vmlinuz
2354                LogFile "INFO: Schlomo, this one's for you."
2355            else
2356                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2357                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2358                LogFile "INFO: $possible_kernels"
2359                output=""
2360            fi
2361        fi
2362    fi
2363    if [ $KERNEL_IS_XEN = "yes" ]; then
2364        if [ "$noof_xenkernels" -eq "0" ]; then
2365            xenkernelpath=""
2366        elif [ "$noof_xenkernels" -eq "1" ]; then
2367            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2368            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2369        else
2370            for i in $possible_xenkernels ; do
2371                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2372                    LogFile "INFO: OK, I used my initiative and found that "
2373                    LogFile "INFO: $i is probably your Xen kernel. "
2374                    xenkernelpath="$i"
2375                    break
2376                fi
2377            done
2378            if [ ! -n "$xenkernelpath" ]; then
2379                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2380                if [ ! -n "$new_possible_xenkernels" ]; then
2381                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2382                    LogFile "INFO: Using $xenkernelpath"
2383                else
2384                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2385                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2386                    LogFile "INFO: $possible_xenkernels"
2387                    output=""
2388                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2389                    LogFile "INFO: Using $xenkernelpath"
2390                fi
2391            fi
2392        fi
2393        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2394            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2395        fi
2396    fi
2397    #LogAll "TryToFindKernelPath found $output"
2398    echo "$output"
2399}
2400
2401
2402TurnTgzIntoRdz() {
2403    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink templog
2404
2405    tgz_dir_fname=$1
2406    rdz_fname=$2
2407    kernelsize=$3
2408    maxsize=$(($BOOT_SIZE-$kernelsize))
2409    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2410    tempfile=$MINDI_TMP/temp.rd
2411    res=0 
2412    templog=$MINDI_TMP/$$.log
2413    > $templog
2414
2415    echo -en "..."
2416    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2417    echo -en "..."
2418    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2419    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2420    echo -en "..."
2421    mkdir -p $mountpoint
2422    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2423    echo -en "..."
2424    old_pwd=`pwd`
2425    cd "$mountpoint"
2426
2427    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2428    for d in bin sbin lib lib64; do
2429        if [ -h "/$d" ]; then
2430            thelink=`readlink /$d`
2431            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2432            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2433            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2434                rmdir $mountpoint/$d
2435            fi
2436            if [ ! -h $mountpoint/$d ]; then
2437                rm -f $mountpoint/$d 2> /dev/null
2438                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2439            fi
2440        fi
2441    done
2442
2443    LogFile "INFO: what is now in $mountpoint"
2444    ls -alR $mountpoint >> $LOGFILE
2445   
2446    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2447    # copy from rootfs into mountpoint
2448    for f in $tgz_dir_fname/*; do 
2449        if [ ! -r $f ]; then
2450            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2451        else
2452            cp -af $f . 2>&1 >> $LOGFILE
2453        fi
2454    done
2455    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2456    ln -sf usr/sbin/init linuxrc
2457
2458    cd dev || Die "Can't cd to dev"
2459    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2460    rm -f dev-entries.tgz
2461    cd ..
2462
2463    for w in insmod.static insmod.static.old ; do
2464        s=`which $w 2> /dev/null`
2465        if [ -e "$s" ] ; then
2466            tar cf - -C / $s 2> /dev/null | tar xf -
2467        fi
2468    done
2469
2470    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2471   
2472    # Copy of files mandatory for ssh to automate mount if sshfs is used
2473    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2474    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2475    cat > $mountpoint/tmp/myssh << EOF
2476ssh -o StrictHostKeyChecking=no $*
2477EOF
2478    chmod 755 $mountpoint/tmp/myssh
2479
2480    # Copy of files mandatory for ld.so
2481    cp -a /etc/ld.so.c* $mountpoint/etc
2482
2483    # Handle the case where busybox and mount are dynamically linked
2484    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2485    if [ $? -eq 0 ]; then
2486        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2487        rm -f bin/mount
2488    fi
2489
2490    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2491    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2492    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2493        if [ -d $f ]; then
2494            for g in `find $f`; do 
2495                echo $g >> $MINDI_TMP/minimal.lis
2496                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2497            done
2498        else 
2499            if [ -r $f ]; then
2500                echo $f >> $MINDI_TMP/minimal.lis
2501                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2502            fi
2503        fi
2504    done
2505    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2506        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2507    done
2508    # Initial / are trucated by tar
2509    finallist=""
2510    # Remove directories from the list, as tar/cp will create them anyway
2511    # and it may hurt if /lib is in it as on Debian/Ubuntu
2512    # recent bash says that -d is true for a link to a dir !
2513    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2514        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2515            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2516            if [ ! -e "$mountpoint/$f" ]; then
2517                finallist="$finallist $f"
2518            fi
2519        fi
2520    done
2521    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2522
2523    #tar cf - $finallist 2> $templog | tar xf - || LogIt "WARNING: Problem in minimal analysis" $templog
2524    echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $templog
2525    cp -a --parents $finallist -t $mountpoint 2> $templog || LogIt "WARNING: Problem in minimal analysis" $templog
2526
2527    # In case target /bin dir still doesn't exist, create it before using it
2528    if [ ! -d $mountpoint/bin ]; then
2529        mkdir -p $mountpoint/bin
2530    fi
2531
2532    # For older distributions expecting /sbin/init provides it
2533    if [ ! -e sbin/init ]; then
2534        (cd sbin ; ln -sf ../usr/sbin/init .)
2535    fi
2536
2537    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2538    ln -sf /bin/bash bin/sh
2539    LogFile "INFO: Using bash as default shell"
2540
2541    # Avoids an issue on some distro (RHEL5)
2542    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2543
2544    mkdir -p $mountpoint/tmp
2545    # Management of udev (which includes modprobe in rules)
2546    ps auxww | grep -v grep | grep -qw udevd
2547    if [ $? -eq 0 ]; then
2548        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2549        LogFile "INFO: udev device manager found"
2550        tar cf - -C / /etc/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $templog
2551        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2552        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2553        # Do not do it if it's a link (Ubuntu 64 bits #503)
2554        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2555            tar cf - -C / /lib64/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $templog
2556        fi
2557        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2558            tar cf - -C / /lib32/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $templog
2559        fi
2560        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2561            tar cf - -C / /lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $templog
2562        fi
2563        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2564            tar cf - -C / /usr/lib/udev 2> $templog | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $templog
2565        fi
2566        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2567            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2568            lis=""
2569            # Get only the files which exist in that list
2570            # and potentially their symlink structure
2571            for i in $lis2; do
2572                if [ -h $i ]; then
2573                    j=$i
2574                    while [ -h $j ]; do
2575                        lis="$lis $j"
2576                        j=`readlink -f $j`
2577                    done
2578                    lis="$lis $j"
2579                elif [ -f $i ]; then
2580                    lis="$lis $i"
2581                fi
2582            done
2583            # And their deps
2584            LocateDeps $lis > $MINDI_TMP/udev.lis
2585            for i in $lis; do
2586                if [ "`echo $i | cut -c1`" = "/" ]; then
2587                    j=`echo $i | cut -c2-`
2588                    [ "$j" != "" ] && rm -f $j
2589                fi
2590                echo "$i" >> $MINDI_TMP/udev.lis
2591            done
2592            finallist=""
2593            # Remove directories from the list, as tar/cp will create them anyway
2594            # and it may hurt if /lib is in it as on Debian/Ubuntu
2595            # recent bash says that -d is true for a link to a dir !
2596            for f in `sort -u $MINDI_TMP/udev.lis`; do
2597                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2598                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2599                    if [ ! -e "$mountpoint/$f" ]; then
2600                        finallist="$finallist $f"
2601                    fi
2602                fi
2603            done
2604            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $templog
2605            echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $templog
2606            cp -a --parents $finallist -t $mountpoint/ 2> $templog  || LogIt "ERROR: Problem in udev.lis analysis" $templog
2607            rm -f $MINDI_TMP/udev.lis
2608        else
2609            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2610            LogAll "         mindi will use static devices which may cause problems"
2611            rm -f $mountpoint/tmp/USE-UDEV
2612        fi
2613    fi
2614
2615    # Management of potential HW info (ProLiant only at the moment)
2616    rm -rf $MINDI_CACHE/bkphw
2617    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2618    if [ -d $MINDI_CACHE/bkphw ]; then
2619        LogIt "INFO: Hardware Information found and saved ..."
2620        cp -rp $MINDI_CACHE/bkphw .
2621        if [ -f $MINDI_CACHE/tools.files ]; then
2622            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2623            LocateDeps $lis > $MINDI_TMP/tools.lis
2624            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $templog
2625        fi
2626        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2627            mv -f $MINDI_CACHE/mindi-rsthw .
2628            chmod 755 ./mindi-rsthw
2629        fi
2630        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2631    fi
2632
2633    # Management of perl scripts delivered needed at restore time
2634    LogIt "INFO: Analyzing perl modules dependencies"
2635    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/[s]*bin/mr-* 2> $templog > $MINDI_TMP/perl.lis || LogIt "ERROR: Problem in mindi-get-perl-modules" $templog
2636    LogFile "DBG4: Perl Modules found:"
2637    LogFile "-------------------------"
2638    cat $MINDI_TMP/perl.lis >> $LOGFILE
2639    LogFile "-------------------------"
2640    tar cf - `cat $MINDI_TMP/perl.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $templog
2641
2642    for w in cdrom groovy-stuff ; do
2643        mkdir -p mnt/$w
2644    done
2645
2646    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2> $templog | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $templog
2647
2648    echo -en "..."
2649    cd /
2650
2651    needed_modules=""
2652    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2653
2654    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2655        # For PXE boot
2656        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2657    fi
2658    for i in $DENY_MODS; do
2659        LogFile "INFO: Removing $i from the list of modules to load"
2660        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2661    done
2662
2663    if [ "${kernelname}" != "" ]; then
2664        needed_modules_path=lib/modules/${kernelname}
2665        mkgmopt="-k ${kernelname}"
2666    else
2667        needed_modules_path=lib/modules/$KERVERRUN
2668        mkgmopt="-k $KERVERRUN"
2669    fi
2670
2671    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2672    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2673
2674    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2675    cp --parents -aL $needed_modules $mountpoint/ 2> $templog || LogIt "ERROR: Unable to copy modules to $mountpoint" $templog
2676
2677    # Uncompress modules if not using udev and native modprobe
2678    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2679        for i in $needed_modules; do
2680            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2681                gunzip -f $mountpoint/$i
2682            fi
2683            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2684                bunzip2 -f $mountpoint/$i
2685            fi
2686            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2687                unxz -f $mountpoint/$i
2688            fi
2689            LogFile "INFO: Uncompressing $i"
2690        done
2691    fi
2692
2693    # Also copy modules.* in case of udev so that normal modprobe works
2694    tar cf - -C / /$needed_modules_path/modules.* 2> $templog | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $templog
2695
2696    # Copy FW in case some drivers needs it
2697    for d in "/lib" "/usr/lib"; do
2698        if [ -d "$d/firmware" -a ! -h $d ]; then
2699            cp -a "$d/firmware" "$mountpoint/$d"
2700        fi
2701    done
2702
2703    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2704    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2705        if [ -d "$d/multipath" -a ! -h $d ]; then
2706            cp -a "$d/multipath" "$mountpoint/$d"
2707        fi
2708    done
2709
2710    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2711    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e $mountpoint/bin/$i ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2712
2713    # Copy an additional ProLiant tool for OBDR support
2714    if [ -f $MINDI_TMP/OBDR ]; then
2715        found=0
2716        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2717            mkdir -p $mountpoint/usr/bin
2718            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2719            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2720            found=1
2721        fi
2722        if [ -x /usr/bin/sg_wr_mode ]; then
2723            mkdir -p $mountpoint/usr/bin
2724            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2725            LocateDeps $lis > $MINDI_TMP/obdr.lis
2726            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2> $templog | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $templog)
2727            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2728            found=1
2729        fi
2730        if [ $found -eq 0 ]; then
2731            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2732            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2733        fi
2734    fi
2735
2736    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2737        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2738        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2739        rm -f $mountpoint/sbin/devfsd
2740    fi
2741    cd "$old_pwd"
2742    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2743    if [ _"$MONDO_SHARE" != _"" ]; then
2744        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2745        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2746        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2747        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2748        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2749    fi
2750
2751    # Create module list to load at restore time
2752    rm -f $mountpoint/tmp/modules
2753    for m in $CDROM_MODS; do
2754        echo $m >> $mountpoint/tmp/modules
2755    done
2756
2757    # copy boot stuff now generated in PrepareDataDiskImage
2758    if [ "$BOOT_TYPE" = "UEFI" ]; then
2759        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./EFI)
2760    else
2761        (cd $mountpoint ; tar xfz $MINDI_CACHE/all.tar.gz ./boot)
2762    fi
2763
2764    mkdir -p $mountpoint/proc
2765    LogFile "---------------------------"
2766    LogFile "Size of initial ramdisk:"
2767    LogFile "---------------------------"
2768    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2769    LogFile "---------------------------"
2770    LogFile "Content of initial ramdisk:"
2771    LogFile "---------------------------"
2772    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2773    LogFile "---------------------------"
2774
2775    # Determine what filesystem to use for initrd image
2776    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2777    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2778    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2779    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2780        # say what will be used
2781        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2782        # kernel expects linuxrc in ext2 filesystem
2783        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2784        # unmount loop filesystem and create image file using the standard approach
2785        umount $mountpoint || Die "Cannot unmount $tempfile"
2786        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2787        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2788            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2789        else
2790            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2791        fi
2792        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2793        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2794        rm -f ${rdz_fname}.tmp
2795        # log that we are done
2796        LogFile "      ...done."
2797    elif [ "$gvFileSystem" = "initramfs" ]; then
2798        # say what will be used
2799        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2800        # make sure that cpio is there
2801        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2802        # go into filesystem
2803        cd "$mountpoint"
2804        # kernel expects init in cpio filesystem
2805        ln -sf usr/sbin/init init
2806        # create cpio image file and unmount loop filesystem
2807        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2808        cd "$old_pwd"
2809        umount $mountpoint || Die "Cannot unmount $tempfile"
2810        # log that we are done
2811        LogFile "      ...done."
2812    else
2813        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2814    fi
2815
2816    if [ "$res" -eq "0" ] ; then
2817        echo -en "..."
2818    else
2819        echo -en "\rMade an rdz WITH ERRORS.           \n"
2820    fi
2821    return 0
2822}
2823
2824
2825##############################################################################
2826#----------------------------------- Main -----------------------------------#
2827##############################################################################
2828
2829# Now we can create what we need
2830mkdir -p $MINDI_TMP
2831
2832# --nolog needs to be first, and is used in analyze-my-lvm
2833if [ "$1" = "--nolog" ] ; then
2834    shift
2835    LOGFILE=/dev/stderr
2836else
2837    > $LOGFILE
2838fi
2839if [ "$1" = "--printvar" ] ; then
2840    shift
2841    if [ _"$1" != _"" ] ; then
2842        set | grep -Ew "^$1" | cut -d= -f2
2843    fi
2844    exit 0
2845fi
2846
2847LogFile "mindi v$MINDI_VERSION"
2848LogFile "$ARCH architecture detected"
2849LogFile "mindi called with the following arguments:"
2850echo "$@">> $LOGFILE
2851LogFile "Start date : `date`"
2852LogFile "-----------------------------"
2853
2854[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2855
2856# Log some capital variables
2857[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2858[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2859LogFile "MONDO_SHARE = $MONDO_SHARE"
2860LogFile "MINDI_LIB = $MINDI_LIB"
2861LogFile "MINDI_SBIN = $MINDI_SBIN"
2862LogFile "MINDI_CONF = $MINDI_CONF"
2863# Purge from potential old run
2864if [ _"$MINDI_CACHE" = _"" ]; then
2865    Die "MINDI_CACHE undefined"
2866else
2867    LogFile "MINDI_CACHE = $MINDI_CACHE"
2868fi
2869
2870if [ -f $MINDI_CONFIG ]; then
2871    LogFile "-----------------------------"
2872    LogFile " Mindi configuration file    "
2873    LogFile "-----------------------------"
2874    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2875    LogFile "-----------------------------"
2876fi
2877LogFile "In Mindi"
2878LogFile "--------"
2879LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2880LogFile "BOOT_SIZE = $BOOT_SIZE"
2881LogFile "--------"
2882
2883trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2884
2885# Sanity checks
2886which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2887which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2888which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2889which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2890if which awk &> /dev/null ; then
2891    if ! which gawk &> /dev/null ; then
2892        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2893    fi
2894fi
2895which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2896[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2897
2898[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2899
2900# Update the PATH variable if incomplete
2901if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2902    PATH=$PATH:/sbin:/usr/sbin
2903    export PATH
2904    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2905    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2906    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2907fi
2908
2909if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2910    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2911fi
2912
2913### TODO
2914### Fix as it's not mandatory on ia64
2915if [ "$ARCH" = "ia64" ] ; then
2916    if which elilo &> /dev/null ; then
2917        LILO_EXE=elilo
2918    else
2919        LILO_EXE=`which false 2> /dev/null`
2920    fi
2921else
2922    FindIsolinuxBinary
2923fi
2924trap "Aborted" SIGTERM
2925DONE="\r\t\t\t\t\t\t\t\tDone.         "
2926kernelpath=""
2927MONDO_ROOT=/var/cache/mondo
2928mkdir -p $MONDO_ROOT
2929
2930if [ -d "/proc/lvm" ]; then
2931    # LVM v1
2932    LVMCMD=""
2933    LVM="v1"
2934elif [ -d "/dev/mapper" ]; then
2935    # LVM v2
2936    LVMCMD="lvm"
2937    LVM="v2"
2938else
2939    LVM="false"
2940fi
2941
2942if [ -e "/proc/cmdline" ]; then
2943    CMDLINE="/proc/cmdline"
2944elif [ -e "/tmp/cmdline" ]; then
2945    CMDLINE="/tmp/cmdline"
2946else
2947    CMDLINE="/dev/null"
2948fi
2949
2950LogFile "INFO: LVM set to $LVM"
2951LogFile "----------"
2952LogFile "mount result:"
2953LogFile "-------------"
2954mount >> $LOGFILE
2955if [ -e /etc/raidtab ]; then
2956    LogFile "-------------"
2957    LogFile "/etc/raidtab content:"
2958    LogFile "-------------"
2959    cat /etc/raidtab >> $LOGFILE
2960else
2961    LogFile "No file /etc/raidtab"
2962fi
2963if [ -e /etc/mdadm.conf ]; then
2964    LogFile "-------------"
2965    LogFile "/etc/mdadm.conf content:"
2966    LogFile "-------------"
2967    cat /etc/mdadm.conf >> $LOGFILE
2968else
2969    LogFile "-------------"
2970    LogFile "No file /etc/mdadm.conf"
2971fi
2972LogFile "-------------"
2973LogFile "cat $CMDLINE"
2974LogFile "-------------"
2975cat $CMDLINE >> $LOGFILE
2976LogFile "-------------"
2977LogFile "cat /proc/swaps:"
2978LogFile "-------------"
2979cat /proc/swaps >> $LOGFILE
2980LogFile "-------------"
2981if [ -e /proc/mdstat ]; then
2982    LogFile "cat /proc/mdstat:"
2983    LogFile "-------------"
2984    cat /proc/mdstat >> $LOGFILE
2985else
2986    LogFile "No pseudo file /proc/mdstat"
2987fi
2988LogFile "-------------"
2989LogFile "cat /proc/partitions:"
2990LogFile "-------------"
2991cat /proc/partitions >> $LOGFILE
2992LogFile "-------------"
2993LogFile "cat /proc/filesystems:"
2994LogFile "-------------"
2995cat /proc/filesystems >> $LOGFILE
2996LogFile "-------------"
2997LogFile "lsmod result:"
2998LogFile "-------------"
2999lsmod >> $LOGFILE
3000MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3001if [ -x /usr/sbin/esxcfg-module ]; then
3002    LogFile "-------------"
3003    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3004    LogFile "-------------"
3005    LogFile "VMWare modules"
3006    LogFile "-------------"
3007    /usr/sbin/esxcfg-module -l >> $LOGFILE
3008    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3009fi
3010LogFile "-------------" 
3011LogFile "FORCE_MODS:"
3012LogFile "-------------"
3013LogFile "$FORCE_MODS"
3014LogFile "-------------"
3015LogFile "DENY_MODS:"
3016LogFile "-------------"
3017LogFile "$DENY_MODS"
3018LogFile "-------------"
3019LogFile "df result:"
3020LogFile "----------"
3021df -aT >> $LOGFILE
3022LogFile "-------------"
3023LogFile "df -i result:"
3024LogFile "----------"
3025df -i >> $LOGFILE
3026LogFile "-------------"
3027if [ -r /boot/grub/menu.lst ]; then
3028    LogFile "-------------"
3029    LogFile "INFO: /boot/grub/menu.lst content"
3030    LogFile "-------------"
3031    cat /boot/grub/menu.lst >> $LOGFILE
3032    LogFile "-------------"
3033fi
3034if [ -r /boot/grub/grub.conf ]; then
3035    LogFile "-------------"
3036    LogFile "INFO: /boot/grub/grub.conf content"
3037    LogFile "-------------"
3038    cat /boot/grub/grub.conf >> $LOGFILE
3039    LogFile "-------------"
3040fi
3041if [ -r /boot/grub/grub.cfg ]; then
3042    LogFile "-------------"
3043    LogFile "INFO: /boot/grub/grub.cfg content"
3044    LogFile "-------------"
3045    cat /boot/grub/grub.cfg >> $LOGFILE
3046    LogFile "-------------"
3047fi
3048if [ -r /boot/grub/device.map ]; then
3049    LogFile "-------------"
3050    LogFile "INFO: /boot/grub/device.map content"
3051    LogFile "-------------"
3052    cat /boot/grub/device.map >> $LOGFILE
3053    LogFile "-------------"
3054fi
3055if [ -r /etc/lilo.conf ]; then
3056    LogFile "-------------"
3057    LogFile "INFO: /etc/lilo.conf content"
3058    LogFile "-------------"
3059    cat /etc/lilo.conf >> $LOGFILE
3060fi
3061if [ -d /boot/efi ]; then
3062    gcf=`find /boot/efi -name 'grub.c*'`
3063    if [ _"$gcf" = _"" ]; then
3064        LogFile "Found a /boot/efi directory without a grub config file in it"
3065    else
3066        LogFile "-------------"
3067        LogFile "INFO: $gcf content"
3068        LogFile "-------------"
3069        cat $gcf >> $LOGFILE
3070        LogFile "-------------"
3071    fi
3072fi
3073
3074LogFile "Full fdisk info"
3075LogFile "---------------"
3076$FDISK -l >> $LOGFILE
3077LogFile "----------------"
3078
3079# Compute libata version
3080laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3081# If libata v2 is used then remove ide-generic as it will perturbate boot
3082if [ "`echo $MODULES | grep libata`" ]; then
3083    if [ "$laver" = "2" ]; then
3084        DENY_MODS="$DENY_MODS ide-generic"
3085        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3086        LogFile "-------------"
3087    fi
3088fi
3089
3090# Check for McAfee which disturbs the access to some files (tgz in articular)
3091if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3092    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3093    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3094    LogFile "WARNING: You have two options:"
3095    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3096    LogFile "WARNING:  - Disable the scanner during the backup"
3097fi
3098
3099# Check for ISO_CMD command
3100if [ ! -x $ISO_CMD ]; then
3101    LogFile "NOTE: No CD image (ISO file) utility found"
3102fi
3103
3104FLOPPY_WAS_MOUNTED=""
3105for mtpt in /media/floppy /mnt/floppy /floppy ; do
3106    if mount | grep -w $mtpt &> /dev/null ; then
3107        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3108        umount $mtpt
3109    fi
3110done
3111
3112#
3113# If we have a USB device we need to store info
3114# and remove it from the parameters line
3115#
3116if [ "$#" -ne "0" ] ; then
3117    if [ "$1" = "--usb" ] ; then
3118        shift
3119        USBDEVICE=$1
3120        if [ _"$USBDEVICE" = _"" ]; then
3121            Die "No USB device specified"
3122        fi
3123        shift
3124    fi
3125fi
3126
3127if [ "$#" -ne "0" ] ; then
3128    if [ "$1" = "--findkernel" ] ; then
3129        resk=`TryToFindKernelPath`
3130        # Avoids logfile content for mondo
3131        export MONDO_SHARE=""
3132        if [ "$resk" = "" ] ; then
3133            if [ $KERNEL_IS_XEN = "yes" ]; then
3134                echo "$xenkernelpath"
3135                LogFile "INFO: xenkernelpath = $xenkernelpath"
3136                MindiExit 0
3137            else
3138                MindiExit -1
3139            fi
3140        else
3141            echo "$resk"
3142            LogFile "INFO: kernelpath = $resk"
3143            MindiExit 0
3144        fi
3145    elif [ "$1" = "--locatedeps" ] ; then
3146        [ ! "$2" ] && Die "Please specify the binary to look at"
3147        LocateDeps $*
3148        # Avoids logfile content for mondo
3149        export MONDO_SHARE=""
3150        MindiExit $?
3151    elif [ "$1" = "--readalllink" ] ; then
3152        [ ! "$2" ] && Die "Please specify the binary to look at"
3153        # Avoids logfile content for mondo
3154        export MONDO_SHARE=""
3155        mr-read-all-link $2
3156        MindiExit $?
3157    elif [ "$1" = "--makemessage" ] ; then
3158        MakeMessageFile | cut -c1-80
3159        MindiExit 0
3160    elif [ "$1" = "--makemountlist" ] ; then
3161        [ ! "$2" ] && Die "Please specify the output file"
3162        MakeMountlist $2
3163        CheckMountlist $2
3164        # Avoids logfile content for mondo
3165        export MONDO_SHARE=""
3166        MindiExit $?
3167    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3168        echo "Mindi v$MINDI_VERSION"
3169        # Avoids logfile content for mondo
3170        export MONDO_SHARE=""
3171        MindiExit 0
3172    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3173        MONDO_TMP=$2
3174        # Change MINDI_TMP for the one provided by mondo
3175        # So that it can get back the built files
3176        if [ _"$MONDO_TMP" = _"" ]; then
3177            Die "MONDO_TMP is empty, aborting"
3178        fi
3179        if [ _"$MONDO_TMP" = _"/" ]; then
3180            Die "MONDO_TMP is /, aborting"
3181        fi
3182        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3183        rmdir $MINDI_TMP
3184        export MINDI_TMP=$MONDO_TMP
3185        mkdir -p $MINDI_TMP
3186
3187        # This is the scratch dir in mondo - subdir images
3188        MINDI_CACHE=$3
3189        LogFile "MINDI_CACHE = $MINDI_CACHE"
3190
3191        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3192        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3193       
3194###
3195### Sq-Modification...
3196### Attempt to locate kernel specific module path
3197### if module path is found then use it other wise use uname -r to set it...
3198###
3199        if [ $KERNEL_IS_XEN = "yes" ]; then
3200            LogAll "INFO: xenkernelpath = $xenkernelpath"
3201        fi
3202        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3203        if [ ! -d "/lib/modules/$kernelname" ]; then
3204           LogAll "WARNING: Module path for ${kernelpath} not found..."
3205           LogAll "         using running kernel\'s modules."
3206           kernelname=$KERVERRUN
3207        else
3208           LogAll "INFO: Using modules for kernel: ${kernelname}"
3209        fi
3210        LogAll "INFO: kernelname = $kernelname"
3211        LogAll "INFO: kernelpath = $kernelpath"
3212###
3213### end of Sq-Modification
3214###
3215        TAPEDEV=$5
3216        TAPESIZE=$6
3217        FILES_IN_FILELIST=$7
3218        USE_LZO=$8
3219        CDRECOVERY=$9
3220        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3221            IMAGE_DEVS=""
3222        else
3223            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3224        fi
3225        if [ "${11}" ] ; then
3226            LILO_OPTIONS=""
3227    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3228        fi
3229        LAST_FILELIST_NUMBER=${12}
3230        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3231        export MINDI_EXCLUDE_DEVS="${14}"
3232        USE_COMP="${15}"
3233        USE_LILO="${16}"
3234        USE_STAR="${17}"
3235        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3236        DIFFERENTIAL="${19}"
3237        USE_GZIP="${20}"
3238        USE_LZMA="${21}"
3239        NOT_BOOT="${22}"
3240        BOOT_TYPE="${23}"
3241        [ "$USE_COMP" = "" ] && USE_COMP=yes
3242        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3243        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3244        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3245        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3246        # MONDO_ROOT is the real scratchdir
3247        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3248        if [ _"$MONDO_ROOT" != _"" ]; then
3249            mkdir -p $MONDO_ROOT
3250        else
3251            Die "MONDO_ROOT is undefined"
3252        fi
3253    else
3254        LogScreen "Syntax: mindi (--custom ....)"
3255        MindiExit -1
3256    fi
3257fi
3258
3259if [ _"$MINDI_CACHE" != _"" ]; then
3260    rm -rf $MINDI_CACHE/* 2> /dev/null
3261    mkdir -p $MINDI_CACHE
3262fi
3263
3264[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3265
3266if [ _"$MONDO_SHARE" = _"" ]; then
3267    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3268    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3269    LogIt "BusyBox sources are available from http://www.busybox.net"
3270    LogIt "------------------------------------------------------------------------------"
3271else
3272    LogFile "INFO: You are using Mindi v$MINDI_VERSION to make boot+data disks"
3273fi
3274if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3275    LogIt "INFO: You are using Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3276else
3277    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3278    MindiExit -1
3279fi
3280
3281for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3282    modinfo $i 2> /dev/null 1> /dev/null
3283    if [ $? -eq 0 ]; then
3284        modprobe $i 2>&1 > /dev/null
3285    fi
3286done
3287
3288LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3289LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3290LogFile "NOT_BOOT = '$NOT_BOOT'"
3291if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3292    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3293    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3294    MakeMountlist $MINDI_TMP/mountlist.txt
3295    CheckMountlist $MINDI_TMP/mountlist.txt
3296    mkdir -p $MINDI_TMP/small-all/tmp
3297    cd "$MINDI_TMP/small-all"
3298    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3299    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3300    sleep 2
3301    LogIt "Done. Exiting."
3302    MindiExit 0
3303fi
3304
3305if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3306    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3307fi
3308
3309if [ "$kernelpath" = "" ] ; then
3310    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3311    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3312    read ch
3313    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3314        USE_OWN_KERNEL="yes"
3315    else
3316        USE_OWN_KERNEL="no"
3317    fi
3318    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3319        kernelpath=`TryToFindKernelPath`
3320        if [ "$kernelpath" = "" ] ; then
3321            echo -n "Please enter kernel path : "
3322            read kernelpath
3323        fi
3324    fi
3325fi
3326
3327echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3328[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3329
3330mountpoint=$MINDI_TMP/mountpoint.$$
3331PrepareDataDiskImages
3332
3333export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3334
3335LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3336PrepareBootDiskImage $kernelpath || Die "Failed to create boot disk image."
3337
3338[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3339...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3340
3341if [ _"$MONDO_SHARE" = _"" ]; then
3342    ListImagesForUser
3343    OfferToMakeBootableISO
3344    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3345        OfferToMakeBootableUSB
3346    fi
3347    LogAll "Finished."
3348elif [ "$TAPEDEV" ] ; then
3349    if [ "$ARCH" != "ia64" ] ; then
3350        # We need to keep the img file as boot file for ia64 platform
3351        rm -f $MINDI_CACHE/{*img,*iso}
3352    else
3353        rm -f $MINDI_CACHE/*iso
3354    fi
3355    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3356        OfferToMakeBootableUSB
3357    fi
3358    OfferToMakeBootableISO
3359    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3360        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3361    else
3362        Die "Cannot find all.tar.gz, to be written to tape"
3363    fi
3364elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3365    OfferToMakeBootableUSB
3366else
3367    OfferToMakeBootableISO
3368fi
3369
3370if [ -f $MINDI_TMP/$MRCFG ]; then
3371    LogFile "INFO: Your $MRCFG file is:"
3372    LogFile "--------------------------"
3373    cat $MINDI_TMP/$MRCFG >> $LOGFILE
3374    LogFile "--------------------------"
3375else
3376    if [ _"$MONDO_SHARE" != _"" ] ; then
3377        LogIt "ERROR: You don't have a $MRCFG file !"
3378    fi
3379fi
3380# cleanup
3381LogAll "INFO: $FRIENDLY_OUTSTRING"
3382for mtpt in $FLOPPY_WAS_MOUNTED ; do
3383    mount $mtpt
3384done
3385MindiExit 0
Note: See TracBrowser for help on using the repository browser.