source: branches/3.2/mindi/mindi @ 3372

Last change on this file since 3372 was 3372, checked in by Bruno Cornec, 5 years ago
  • Increase BOOT_SIZE again for more recent distributions
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 120.9 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3372 2015-04-18 17:15:34Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000      # increase if you run out of ramdisk space
44BOOT_SIZE=86000         # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47    # Ask if you want to make a CD Image to be written?
48    # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51    # Ask if you want to make a USB Image to be written?
52    # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55    # If set to "no", you will be prompted for whether or not
56    # you want to use your own kernel, or the supplied default.
57    # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60    # If set to "no", the kernel is not a Xen kernel
61    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63 
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio hv_storvsc"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid hid_generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 nls_iso8859-1 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs nls_utf8"
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/mr_parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125        if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    Die "User abort."
224}
225
226
227AddFileToCfgIfExists() {
228    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
229}
230
231
232AddKeyboardMappingFile() {
233    local mappath r included_list included_item i res ii sss
234    mappath=$1
235    KBDEPTH=$(($KBDEPTH+1))
236    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
237    if [ -e "$bigdir/$mappath" ] ; then
238        LogFile "INFO: $mappath already added"
239        return
240    elif [ -d "$bigdir/$mappath" ] ; then
241        echo "Cannot add $mappath: it's a directory. Sorry."
242        return
243    fi
244    LogFile "INFO: Added kbd map $mappath"
245    if [ ! -e "$mappath" ] ; then
246        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
247        if [ ! -e "$mappath" ] ; then
248            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
249            return
250        fi
251    else
252        echo -en "`basename $mappath | tr '.' '#' | sed 's/#kmap#gz//' | sed 's/#inc#gz//'` " | tr '#' '.'
253    fi
254
255    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
256    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
257        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
258    else
259        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
260    fi
261    for included_item in $included_list ; do
262        if [ ! -e "$included_item" ] ; then
263            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
264            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
265            for ii in $sss ; do
266                [ -e "$ii" ] && AddKeyboardMappingFile $ii
267            done
268        else
269            AddKeyboardMappingFile $included_item
270        fi
271    done
272}
273
274
275CopyDependenciesToDirectory() {
276    local outdir incoming counter d found tdir
277    outdir=$1
278    mkdir -p $outdir
279    incoming=`ReadLine`
280    counter=0
281    while [ "$incoming" != "" ] ; do
282        # Non absolute file names should not arrive till here => skipped
283        if [ `echo "$incoming" | cut -c1` != '/' ]; then
284            LogAll "WARNING: Unable to handle $incoming"
285            incoming=`ReadLine`
286            continue
287        fi
288        # no parent directory of incoming should be a link, copy is not possible in that case
289        d=`dirname "$incoming"`
290        found="false"
291        while [ $d != "/" -a $found = "false" ]; do
292            [ -h "$d" ] && found="true"
293            d=`dirname "$d"`
294        done
295        if [ -d "$incoming" -a ! -h "$incoming" ]; then
296            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
297        elif [ -e "$incoming" ] && [ $found = "false" ]; then
298            if [ ! -h "$incoming" ]; then
299                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
300            else
301                tdir=`dirname "$incoming"`
302                if [ ! -e "$outdir/$tdir" ]; then
303                    mkdir -p "$outdir/$tdir"
304                fi
305                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
306            fi
307            # Only uncompress modules if not using udevd
308            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
309                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
310            fi
311            [ -x "$outdir" ] && StripExecutable $outdir
312            counter=$(($counter+1))
313            LogProgress $counter $2
314        fi
315        incoming=`ReadLine`
316    done
317}
318
319
320CountItemsIn() {
321    local r
322    r=0
323    for q in $1 ; do
324        r=$(($r+1))
325    done
326    echo $r
327}
328
329
330DropOptimizedLibraries() {
331    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
332    filelist=$1
333    outdir=$2
334
335    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
336    if [ "$list_of_optimized_libraries" = "" ] ; then
337        return 0
338    fi
339    echo -en "Dropping i686-optimized libraries if appropriate"
340    for optimized_lib_name in $list_of_optimized_libraries ; do
341        echo -en "."
342        reason=""
343        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
344        echo "$vanilla_lib_name" >> $filelist
345        LogFile "INFO: Adding $vanilla_lib_name to filelist"
346        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
347        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
348
349        # This may return multiple files
350        for resolved in `mr-read-all-link $vanilla_lib_name`; do
351            LogFile "INFO: Adding as deps $resolved to filelist"
352            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
353            if [ "$vanilla_resolved_name" != "$resolved" ]; then
354                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
355                rmdir $outdir$resolved > /dev/null 2> /dev/null
356                ln -sf $vanilla_resolved_name $outdir$resolved
357                LogFile "INFO: Excluding deps $resolved" 
358                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
359                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
360                echo "$vanilla_resolved_name" >> $filelist.tmp
361                mv -f $filelist.tmp $filelist
362            fi
363        done
364    done
365    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
366    mv -f $filelist.tmp $filelist
367    echo -e "$DONE"
368}
369
370
371FindAndAddUserKeyboardMappingFile() {
372    local r res mapfile mappath included_item included_list keyfile mp locale
373    LogAll "INFO: Analyzing your keyboard's configuration."
374    KEYDIR=/usr/lib/kbd
375    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
376    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
377    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
378    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
379    if [ ! -e "$KEYDIR" ] ; then
380        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
381        return 0
382    fi
383    if [ -e "/etc/sysconfig/keyboard" ] ; then
384        LogFile "INFO: Red Hat-style config detected."
385        keyfile=/etc/sysconfig/keyboard
386    elif [ -e "/etc/vconsole.conf" ] ; then
387        LogFile "INFO: New Fedora style config detected."
388        keyfile=/etc/vconsole.conf
389    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
390        LogFile "INFO: Slackware-style config detected."
391        keyfile=/etc/rc.d/rc.keymap
392    elif [ -e "/etc/rc.config" ] ; then
393        LogFile "INFO: Debian-style config detected."
394        keyfile=/etc/rc.config
395    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
396        LogFile "INFO: Debian-style config detected."
397        mkdir -p $bigdir/tmp
398        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
399        KBDEPTH=0
400        mkdir -p $bigdir/etc/console
401        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
402        echo ""
403        echo -e "$DONE"
404        return 0
405    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
406        LogFile "INFO: Ubuntu-style config detected."
407        mkdir -p $bigdir/tmp
408        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
409            kbdfile="/etc/console-setup/boottime.kmap.gz"
410        else
411            kbdfile="/etc/console-setup/cached.kmap.gz"
412        fi
413        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
414        KBDEPTH=0
415        mkdir -p $bigdir/etc/console-setup
416        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
417        echo ""
418        echo -e "$DONE"
419        return 0
420    elif [ -e "/etc/rc.conf" ] ; then
421        LogFile "INFO: ArchLinux config detected."
422        keyfile=/etc/rc.conf
423    elif [ -e "/etc/conf.d/keymaps" ] ; then
424        LogFile "INFO: Gentoo-style config detected."
425        keyfile=/etc/conf.d/keymaps
426    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
427        LogFile "INFO: X11-style config detected."
428        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
429    else
430        LogFile "Searching for rc.config ..."
431        keyfile=`find /etc -name rc.config | head -n1`
432        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
433            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
434            return
435        else
436            LogFile "INFO: Found $keyfile"
437        fi
438    fi
439    if [ ! -e "$KEYDIR/keymaps" ] ; then
440        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
441        return
442    fi
443    LogFile "INFO: keyfile=$keyfile"
444    # For SLES we need to remove the .map.gz extension Cf #614
445    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
446    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
447    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
448    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
449    LogFile "INFO: locale=$locale"
450    #
451    # Process the keymaps dir once for all
452    # AddKeyboardMappingFile will use it recursively
453    #
454    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
455    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
456    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
457    # If we have multiple keymaps then log it !!
458    echo "$mp" | grep -q " " >> $LOGFILE
459    if [ $? -eq 0 ]; then
460        LogAll "WARNING: Multiple keymaps found: $mp"
461        LogFile "INFO: The following one will be used"
462    fi
463    for i in $mp ; do
464        mappath=$i
465        [ -e "$i" ] && [ ! -d "$i" ] && break
466    done
467    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
468        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
469    fi
470    LogFile "INFO: mappath = $mappath"
471    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
473        return
474    fi
475    LogAll "INFO: Adding the following keyboard mapping tables: "
476    mkdir -p $bigdir/tmp
477    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
478    KBDEPTH=0
479    AddKeyboardMappingFile $mappath
480    echo ""
481    echo -e "$DONE"
482    rm -f $MINDI_TMP/keymaps.find
483    return 0
484}
485
486
487FindLdlinux32Binary() {
488    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
489    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
490    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
491    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
492    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
495    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
496    if [ ! -e "$LDLINUXC32" ]; then 
497        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
498        LDLINUXC32=/tmp/idoesnthopefullyexist
499    else
500        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
501    fi
502}
503
504
505FindMboot32Binary() {
506    MBOOTC32=/usr/lib/syslinux/mboot.c32
507    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
508    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
514    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
515    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
516}
517
518FindIsolinuxBinary() {
519    ISOLINUX=/usr/lib/isolinux.bin
520    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
526    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
527    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
528    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
529}
530
531
532GenerateGiantDependencyList() {
533    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
534
535    echo -en "Analyzing dependency requirements"
536    outfile=$1
537    tempfile=$MINDI_TMP/$$.txt
538    incoming=`ReadLine`
539
540    > $tempfile
541    progress=0
542    res=0
543    noof_lines=$2
544    while [ "$incoming" != "" ] ; do
545        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
546            incoming=`ReadLine`
547            continue
548        fi
549        if [ "$incoming" = "LVMFILES:" ] ; then
550            break
551        fi
552        filelist=`GenerateListForFile "$incoming"`
553        r=$?
554        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
555        res=$(($res+$r))
556#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
557        for fname in $filelist ; do
558            [ "$fname" != "" ] && echo "$fname" >> $tempfile
559        done
560        progress=$(($progress+1))
561        LogProgress $progress $noof_lines
562        incoming=`ReadLine`
563    done
564    if  [ "$incoming" = "LVMFILES:" ] ; then
565        incoming=`ReadLine`
566        lvmversion=""
567        while [ "$incoming" != "" ] ; do
568            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
569                incoming=`ReadLine`
570                continue
571            fi
572            filelist=`GenerateListForFile "$incoming"`
573            for tool in $filelist ; do
574                lvmresolved=`readlink -f $tool`
575                if [ "$tool" = "$lvmresolved" ]; then
576                    echo "$tool" >> $tempfile
577                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
578                    if [ "$lvmversion" = "" ] ; then
579                        lvmversion=`$lvmresolved`
580                        echo "$lvmresolved" >> $tempfile
581                    fi
582                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
583                    if [ "$lvmversion" = "200" ]; then
584                        # pvdata and lvmcreate_initrd don't exist in LVM2
585                        case "$toolstripped" in
586                        "pvdata")
587                            continue
588                            ;;
589                        "lvmcreate_initrd")
590                            continue
591                            ;;
592                        esac
593                    fi
594                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
595                    if [ -e "$toolpath" ] ; then
596                        echo "$toolpath" >> $tempfile
597                        echo "$tool" >> $tempfile
598                    else
599                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
600                    fi
601                    if [ -e "$toolpath" ] ; then
602                        echo "$toolpath" >> $tempfile
603                        echo "$tool" >> $tempfile
604                    else
605                        echo "Where are your LVM-Tools? Couldn't find $tool"
606                    fi
607                else
608                    echo "$tool" >> $tempfile
609                fi
610            done
611            progress=$(($progress+1))
612            LogProgress $progress $noof_lines
613            incoming=`ReadLine`
614        done
615    fi
616    echo -en "$DONE\nMaking complete dependency list"
617
618    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
619    mv -f $tempfile.new $tempfile
620    > $outfile.pre
621    progress=0
622    noof_lines=`cat $tempfile | wc -l`
623    LogFile "---------------------------------"
624    LogFile "List of dependencies:             "
625    LogFile "---------------------------------"
626    for fname in `cat $tempfile` ; do
627        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
628        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
629        progress=$(($progress+1))
630        LogProgress $progress $noof_lines
631    done
632    if [ _"$MONDO_SHARE" != _"" ]; then
633        mkdir -p $bigdir/tmp
634        mkdir -p $bigdir/usr/bin
635        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
636            LogAll "\nINFO: Incorporating post-nuke tarball"
637            old_pwd=`pwd`
638            cd "$bigdir"
639            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
640            cd "$old_pwd"
641        fi
642        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
643            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
644        else
645            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
646            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
647            LogIt "       If Mindi was called by Mondo then send me a bug report."
648            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
649            LogIt "       Finally, run Mindi again."
650            Die "Odd."
651        fi
652        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
653        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
654            LogAll "\nINFO: Incorporating Network-related settings"
655            for r in NETFS-* ; do
656                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
657                LogFile "INFO: Copying $r to ramdisk"
658            done
659        fi
660    fi
661    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
662    rm -f $tempfile $outfile.pre
663    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
664    return $res
665}
666
667
668GenerateListForFile() {
669    local files_found loc fname incoming i res
670    incoming="$1"
671    files_found=""
672    res=0
673
674    for fname in $incoming ; do
675        files_found="$files_found `LocateFile $fname`"
676    done
677
678    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
679}
680
681
682# Returns all disk devices which are part of a raid array
683GetAllRaidMembers() {
684    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
685}
686
687
688GetFileSizeList() {
689    local i
690    for i in `find $1 -type d -o -print` ; do
691        du -sk $i
692    done
693}
694
695
696# Check kernel filesystem capabilites for accessing initrd image
697# Could be ext2 FS (old mode) or initramfs (new mode)
698#
699# Interface definition:
700# param #1: absolute path to kernel image
701GetInitrdFilesystemToUse() {
702
703    # interface test: make sure we have one parameter
704    if [ $# -ne 1 ]; then
705        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
706    fi
707
708    # interface parameters
709    local lvKernelImage=$1
710
711    # local constants (filesystem magic strings)
712    local lcMagicCramfs="<3>cramfs: wrong magic"
713    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
714    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
715    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
716
717    # local variables
718    local lvOffset
719    local lvScanRes
720    local lvUseFilesystem
721
722    # say where we are.
723    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
724
725    # verify that file exists
726    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
727
728    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
729    file $lvKernelImage 2>&1 | grep -q gzip
730    if [ $? -eq 0 ]; then
731        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
732        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
733    else
734        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
735        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
736        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
737        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
738        if [ $lvOffset -eq 0 ]; then
739            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
740            lvScanRes=$lcMagicInitfs
741        else
742            lvOffset=`expr $lvOffset / 2`
743            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
744            # scan again  kernel image
745            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
746        fi
747    fi
748
749    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
750    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
751        lvUseFilesystem="ext2fs"
752    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
753        lvUseFilesystem="ext3fs"
754    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
755        lvUseFilesystem="initramfs"
756    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
757        lvUseFilesystem="cramfs"
758    else
759        # In that case, we are most probably after 2.6.30 and use the supported initramfs
760        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
761        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
762        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
763        lvUseFilesystem="initramfs"
764    fi
765
766    # say what we are using
767    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
768
769    # return file system to use
770    echo "$lvUseFilesystem"
771
772}
773
774# Searches members of raid device
775# $1: raid device (/dev/md...)
776GetRaidDevMembers() {
777    if [ ! -f /etc/raidtab ]; then 
778        return
779    fi
780    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
781}
782
783
784ListAllPartitions() {
785    local res currline partition all_partitions ap_orig remaining i j
786
787    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
788    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
789    if [ -e "/vmfs/volumes" ]; then
790        # For VMWare ESX 3 get the device names of these volumes
791        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
792    fi
793    return
794}
795
796
797ListImagesForUser() {
798    local path fname
799    path=$MINDI_CACHE
800    echo -en "In the directory '$path' you will find the images:-\n"
801    for fname in `ls $path | grep -F mindi-` ; do
802        printf "%19s " $fname
803    done
804    echo " "
805}
806
807
808ListKernelModulePaths() {
809    local module_list module fname r kern
810    module_list="$MODULES"
811    # Remove unwanted modules from list
812    for i in $DENY_MODS; do
813        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
814    done
815###
816### Sq-Modification ... Use kernelname for module search path if specified
817###
818    if [ "${kernelname}" != "" ]
819    then
820        kern=${kernelname}
821    else
822        kern="$KERVERRUN"
823    fi
824    export KERVER=$kern
825###
826### Sq-Mod End
827###
828    # Get rid of duplicates
829    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
830        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
831        if [ -z "$r" ]; then
832            if [ "`echo "$MODULES" | grep -w $module`" ]; then
833                r="[live module file not found]"
834            else
835                r="[extra module file not found]"
836            fi
837        else
838            [ -f "$r" ] && echo "$r"
839        fi
840        LogFile "INFO: module $module --> $r"
841    done
842    find /lib/modules/$kern/modules.* -type f 2> /dev/null
843}
844
845#
846# Critical function which computes all dependencies (dyn. lib.)
847# for a list of binaries
848#
849LocateDeps() {
850    local incoming fname deps
851    incoming="$*"
852    deps=""
853
854    for fname in $incoming ; do
855        if [ ! -e "$fname" ] ; then
856            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
857            if echo $fname | grep lvm &> /dev/null ; then
858                LogFile "          This warning only affects you if you are using LVM."
859                if echo "$MODULES" | grep lvm &> /dev/null ; then
860                    LogFile "          I think you are, so please take heed!"
861                else
862                    LogFile "          I don't think you are, so don't worry about it."
863                fi
864            fi
865        else
866            deps="$deps $fname" 
867        fi
868    done
869    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
870}
871
872
873LocateFile() {
874    local i j path fname_to_find location output resolved tmp stub cache_id loclist
875    fname_to_find="$1"
876    # It's an absolute path
877    j=`echo "$fname_to_find" | cut -c1`
878    if [ _"$j" = _"/" ]; then
879        dn=`dirname $fname_to_find`
880        # We suppose that the link is already included, just add the new file
881        if [ -h "$dn" ]; then
882            newdn=`readlink -f $dn`
883            bn=`basename $fname_to_find`
884            output="$newdn/$bn"
885        else
886            output="$fname_to_find"
887        fi
888        if [ -h "$output" ] ; then
889            output="`mr-read-all-link $output` $output"
890        fi
891        echo "$output"
892        return 0
893    fi
894    # It's not an absolute path
895    output=""
896    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
897    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
898        [ -h "$path" ] && continue
899        [ ! -e "$path/$fname_to_find" ] && continue
900        output="$path/$fname_to_find $output"
901        if [ -h "$path/$fname_to_find" ] ; then
902            output="`mr-read-all-link $path/$fname_to_find` $output"
903        fi
904    done
905    if [ "$output" = "" ] ; then
906        return 1
907    fi
908    echo "$output"
909    return 0
910}
911
912LogProgress() {
913    local i progress modres noof_lines title
914 
915    progress=$1
916    noof_lines=$2
917    title=$3
918
919    i=$(($progress*100))
920    if [ $noof_lines -ne 0 ]; then
921        i=$(($i/$noof_lines))
922    else
923        i=0
924    fi
925
926    if [ _"$MONDO_SHARE" != _"" ]; then 
927        echo "$title        $i%"
928    else
929        echo -en "\r\t\t\t\t\t\t\t\t"
930        echo -en "$i"
931        echo -en "%"
932        modres=$(($progress%4))
933        [ "$modres" -eq "0" ] && echo -en "\t/"
934        [ "$modres" -eq "1" ] && echo -en "\t-"
935        [ "$modres" -eq "2" ] && echo -en "\t\\"
936        [ "$modres" -eq "3" ] && echo -en "\t|"
937    fi
938}
939
940# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
941MakeMondoConfigFile() {
942    local outfile use_lzo use_comp use_star
943    outfile=$1
944    > $outfile
945    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
946    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
947    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
948    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
949    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
950    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
951    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
952    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
953    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
954    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
955    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
956    echo "use-lzo $use_lzo" >> $outfile
957    echo "use-gzip $use_gzip" >> $outfile
958    echo "use-star $use_star" >> $outfile
959    echo "use-lzma $use_lzma" >> $outfile
960    echo "use-comp $use_comp" >> $outfile
961    echo "datestamp `date`" >> $outfile
962    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
963    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
964    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
965    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
966    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
967    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
968    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
969    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
970    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
971    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
972    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
973    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
974    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
975    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
976
977    # Deal with network configuration in a portable way
978    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
979        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
980    fi
981}
982
983# Get PV's for an LV
984GetPVsForLV() {
985    if [ -n "$1" ]; then
986        vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
987        if [ -z "$vg" ]; then
988            return
989        fi
990        $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
991    fi
992}
993
994
995MakeMountlist() {
996    local mountlist all_partitions current_partition \
997partition_size partition_format outstring partition_number \
998partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
999absolute_partition old_partition_fmt current_lvolume uname skip
1000
1001    LogFile "------------------------------------"
1002    LogFile "Your raw fstab file looks like this:"
1003    LogFile "------------------------------------"
1004    cat $MY_FSTAB >> $LOGFILE
1005    LogAll "-----------------------------------"
1006    LogAll "Your mountlist will look like this:"
1007    LogAll "-----------------------------------"
1008
1009# mountlist(OUT)
1010    mountlist=$1
1011
1012# NB: partition = device
1013# NB: mountpt = where the device is mounted
1014
1015    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1016
1017    [ "$mountlist" != "" ] && rm -Rf $mountlist
1018    > $mountlist
1019    all_partitions=""
1020   
1021    if [ $LVM != "false" ]; then
1022        LogAll "INFO: Analyzing LVM..."
1023        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1024        if [ $? -ne 0 ]; then
1025            LVM="false"
1026        fi
1027        # Excluded LVs and GVs are not reported here
1028        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1029    fi
1030    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1031    for i in $IMAGE_DEVS ; do
1032        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1033    done
1034    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1035    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1036    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1037    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1038    for c_p in $all_partitions ; do
1039        # Skip fd/cd devices, network FS, cifs
1040        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1041        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1042        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1043            current_partition=`readlink -f $c_p`
1044            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1045                current_partition="$c_p"
1046            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1047                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1048                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1049            fi
1050            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1051        else
1052            current_partition="$c_p"
1053        fi
1054        [ "$c_p" = "none" ] && continue
1055        redhat_label=""
1056        label=""
1057        uuid=""
1058        absolute_partition=`readlink -f $c_p`
1059        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1060
1061        # set default in case we dont't find it
1062        str_to_find_fmt_with=$current_partition
1063
1064        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1065        # current_partition contains only first column of /etc/fstab
1066        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1067            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1068            actual_dev=""
1069
1070            # 1st try, findfs - the RHEL way of finding labels and their partitions
1071            if [ -x "/sbin/findfs" ]; then
1072                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1073            fi
1074   
1075            # 2nd try : blkid, the good way for all LABEL except swap
1076            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1077                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1078                # For LVM FS it will give a /dev/dm-# which should then be converted
1079                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1080                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1081                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1082                    for dev in `ls /dev/mapper/*`; do
1083                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1084                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1085                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1086                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1087                            break
1088                        fi
1089                    done
1090                fi
1091            fi
1092   
1093            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1094            # For LVM gives a /dev/mapper entry
1095            if [ "x$actual_dev" = "x" ]; then
1096                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1097            fi
1098   
1099            # 4th try, with vol_id
1100            # SWAP only
1101            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1102                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1103                for dev_swap in $list_swaps ; do
1104                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1105                    if [ "x$dev_exists" != "x" ]; then
1106                        actual_dev=$dev_swap
1107                        break;
1108                    fi
1109                done
1110            fi
1111
1112            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1113            # LABEL=SW-cciss/c0d0p3 (RDP)
1114            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1115            # SWAP only
1116            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1117                    skip=""
1118                    uname=$KERVERRUN
1119                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1120                    # 2.6.12 needs 16 (FC3)
1121                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1122                    # 2.6.19 and upper needs 1052
1123                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1124                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1125                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1126                    if [ $skip = "" ]; then
1127                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1128                    fi
1129                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1130                    do
1131                        # Location of the swap label for kernel 2.6
1132                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1133                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1134                            actual_dev=$try_dev
1135                        fi
1136                    done
1137            fi
1138
1139            # Check if one of all those tries has known success
1140            if [ "x$actual_dev" != "x" ]; then
1141                current_partition=$actual_dev
1142            else
1143                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1144            fi
1145        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1146        # current_partition contains only first column of /etc/fstab
1147        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1148            uuid=`echo "$current_partition" | cut -d'=' -f2`
1149            actual_dev=""
1150
1151            # 1st try, findfs - the RHEL way of finding labels and their partitions
1152            if [ -x "/sbin/findfs" ]; then
1153                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1154            fi
1155   
1156            # 2nd try : blkid, the good way for all UUID except swap
1157            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1158                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1159                # For LVM FS it will give a /dev/dm-# which should then be converted
1160                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1161                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1162                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1163                    for dev in `ls /dev/mapper/*`; do
1164                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1165                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1166                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1167                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1168                            break
1169                        fi
1170                    done
1171                fi
1172            fi
1173   
1174            # 3th try, with vol_id
1175            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1176                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1177                for dev in $list_dev ; do
1178                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1179                    if [ "x$dev_exists" != "x" ]; then
1180                        actual_dev=$dev
1181                        break;
1182                    fi
1183                done
1184            fi
1185
1186            # 4th try, with dumpuuid (VMWare only ?) for swap
1187            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1188                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1189                for dev in $list_dev ; do
1190                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1191                    if [ "x$dev_exists" != "x" ]; then
1192                        actual_dev=$dev
1193                        break;
1194                    fi
1195                done
1196            fi
1197
1198            # Check if one of all those tries has known success
1199            if [ "x$actual_dev" != "x" ]; then
1200                current_partition=$actual_dev
1201            else
1202                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1203            fi
1204        else
1205            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1206            # they use symlinks in fstab unrelated to what is shown in mount !
1207            if [ _"$partition_mountpt" = _"" ]; then
1208                # set default in case we dont't find it
1209                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1210                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1211                            str_to_find_fmt_with=$tmpp
1212                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1213                            break;
1214                        fi
1215                done
1216            fi
1217        fi
1218
1219        # Detects noauto partitions not mounted and exclude them
1220        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1221        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1222                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1223            continue
1224        fi
1225        # Detects bind partitions and exclude them
1226        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1227                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1228            continue
1229        fi
1230
1231        # Look for devices which have to be excluded
1232        skip=0
1233        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1234            l=""
1235            list_of_devices="`mr-read-all-link $current_partition`"
1236            for d in $list_of_devices; do
1237                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1238            done
1239
1240            # Remove PVs from LVs excluded
1241            l="$l `GetPVsForLV $current_partition`"
1242
1243            # We want a single unique list
1244            list_of_devices="`echo $l | sort -u`"
1245
1246            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1247                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1248                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1249                    skip=1
1250                    continue
1251                fi
1252            done
1253        fi
1254        if [ $skip -eq 1 ]; then
1255            continue
1256        fi
1257
1258        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1259        # Detects iso9660 ISO images and exclude them
1260        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1261                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1262            continue
1263        fi
1264        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1265        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1266        # the former is then a link to the latter, so we test whether
1267        # $current_partition is actually such a link or not and set
1268        # $current_lvolume accordingly. On Debian you may find more than one answer
1269        # so we remove the one corresponding to /dev/.static
1270        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1271        # principle is the same and we need to find the link to it as well.
1272        # Note that $current_lvolume may well be an
1273        # ordinary device. It is just to make sure that we feed the right value
1274        # into any of the LVM tools if possible.
1275
1276        current_lvolume="$current_partition"
1277        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1278            # .static dir are a Debian specificity
1279            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1280            echo $current_lvolume | grep -q ' '
1281            if [ $? -eq 0 ]; then
1282                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1283            fi
1284            # if it's not found, it may well be a real device such as a multipath one
1285            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1286            if [ _"$current_lvolume" = _"" ]; then
1287                current_lvolume="$current_partition"
1288            fi
1289        fi
1290        #
1291        # End of LVM device style variation code (other than $current_lvolume).
1292
1293        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1294            # Size computed via LVM not directly
1295            partition_size="lvm"
1296        else
1297            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1298            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1299            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1300                # Skip swap files
1301                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1302                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1303                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1304                [ "$partition_format" != "swap" ] && partition_format="swap"
1305                if [ "$partition_size" = "" ] ; then
1306                    totalsize=0
1307                    items=0
1308                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1309                        totalsize=$(($totalsize+$i))
1310                        items=$(($items+1))
1311                    done
1312                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1313                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1314                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1315                fi
1316            else
1317                partition_size=`SizeOfPartition $current_partition`
1318            fi
1319        fi
1320        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1321        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1322        if [ "$partition_mountpt" = "" ] ; then
1323            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1324                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1325                    partition_mountpt="raid"
1326                    partition_format="raid"
1327                else
1328                    partition_mountpt="lvm"
1329                    partition_format="lvm"
1330                fi
1331            fi
1332        fi
1333        psz=$partition_size
1334        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1335        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1336        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1337            partition_mountpt="image"
1338            old_partition_fmt=$partition_format
1339            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1340            partition_size=$(($partition_size+1)); # just in case
1341            if [ "$partition_format" = "Linux" ] ; then
1342                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1343                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1344                partition_format=$old_partition_fmt
1345            fi
1346        fi
1347
1348        if [ ! "$partition_mountpt" ] ; then
1349            LogFile "------- $FDISK -l $qq log ------------"
1350            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1351                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1352                [ "$partition_format" ] && break
1353            done
1354            LogFile "------- $FDISK log end ------------"
1355            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1356                partition_format="compaq"
1357            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1358                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1359                continue
1360            fi
1361        fi
1362        if [ "$redhat_label" ]; then
1363            label="$redhat_label"
1364        elif [ "$uuid" ]; then
1365            label="$uuid"
1366        fi
1367
1368        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1369        # in order to mount the root part e.g. in grub.
1370        # One way to solve this is to add the UUID now, if there wasn't one so it's
1371        # restored correctly
1372        if [ _"$label" = _"" ]; then
1373            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1374        fi
1375
1376        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1377        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1378        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1379        if [ "$current_partition" = "" ] ; then
1380            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1381        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1382            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1383                partition_mountpt=raid
1384                partition_format=raid
1385                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1386                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1387            else
1388                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1389            fi
1390        elif [ "$partition_format" = "" ] ; then
1391            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1392        elif [ "$partition_size" = "" ] ; then
1393            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1394        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1395            continue
1396        else
1397            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1398                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1399                partition_format="vfat"
1400            fi
1401            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1402            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1403        fi
1404    done
1405    LogAll "-----------------------------------" 
1406}
1407
1408CheckMountlist() {
1409    local file=$1
1410    # Coherency verification
1411    ML01=`cat $file | wc -l`
1412    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1413    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1414    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1415    if [ "$ML01" -ne "$ML1" ]; then
1416        LogFile "--------------------------------------------"
1417        LogAll "WARNING: Duplicate device entry in mountlist"
1418        LogFile "--------------------------------------------"
1419    fi
1420    if [ "$ML02" -ne "$ML2" ]; then
1421        LogFile "--------------------------------------------"
1422        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1423        LogFile "------------------------------------------------"
1424    fi
1425}
1426
1427OfferToMakeBootableISO() {
1428    local i old_pwd
1429    if [ -z "$ISO_CMD" ]; then
1430        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1431        return
1432    fi
1433    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1434        echo -en "Shall I make a bootable CD image? (y/[n]) "
1435        read i
1436        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1437    fi
1438    rm -Rf $MINDI_TMP/iso
1439    mkdir -p $MINDI_TMP/iso/{images,archives}
1440    LogFile "INFO: mindi_lib = $MINDI_LIB"
1441    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1442    for i in memdisk memtest.bin memtest.img ; do
1443        j=$MINDI_LIB/$i
1444        k=$MINDI_TMP/iso
1445        if [ -e "$j" ] ; then
1446            LogAll "INFO: Copying $j to $k"
1447            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1448            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1449            if [ _"$MONDO_SHARE" != _"" ]; then 
1450                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1451            fi
1452        fi
1453    done
1454    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1455    if [ $KERNEL_IS_XEN = "yes" ]; then
1456        FindMboot32Binary
1457        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1458        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1459    fi
1460    # Useful for syslinux 5.x
1461    FindLdlinux32Binary
1462    if [ -e $LDLINUXC32 ]; then
1463        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1464    fi
1465    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1466    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1467
1468    if [ _"$MONDO_SHARE" != _"" ]; then 
1469        if [ $KERNEL_IS_XEN = "yes" ]; then
1470            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1471            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1472        fi
1473        if [ -e $LDLINUXC32 ]; then
1474            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1475        fi
1476        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1477        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1478    fi
1479    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1480    if [ "$ARCH" != "ia64" ] ; then
1481        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1482    fi
1483    old_pwd=`pwd`
1484    cd "$MINDI_TMP/iso"
1485    if [ "$ARCH" != "ia64" ] ; then
1486        if [ _"$MONDO_SHARE" != _"" ]; then 
1487            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1488            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1489                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1490            fi
1491            if [ $KERNEL_IS_XEN = "yes" ]; then
1492                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1493            fi
1494            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1495        fi
1496        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1497    else
1498        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1499    fi
1500    if [ "$?" -ne "0" ] ; then
1501        LogFile "----------- $ISO_CMD's errors --------------"
1502        LogAll "$ISO_CMD returned the following errors:"
1503        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1504        LogAll "ERROR: Failed to create ISO image."
1505    else
1506        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1507    fi
1508    rm -f $MINDI_TMP/mkisofs.log
1509    cd "$old_pwd"
1510}
1511
1512
1513OfferToMakeBootableUSB() {
1514    local i
1515    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1516        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1517        read i
1518        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1519        if [ "$USBDEVICE" = "" ]; then
1520            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1521            read dev
1522            USBDEVICE=$dev
1523        fi
1524        echo "WARNING: This will erase all content on $USBDEVICE"
1525        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1526        read i
1527        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1528    fi
1529    rm -Rf $MINDI_TMP/usb
1530    mkdir -p $MINDI_TMP/usb
1531    USBPART="${USBDEVICE}1"
1532
1533    echo -en "Transforming $USBDEVICE in a Bootable device " 
1534    echo -en "."
1535    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1536    LogFile "INFO: Checking $USBDEVICE"
1537    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1538    if [ $? -ne 0 ]; then
1539        LogAll "ERROR: Unable to access $USBDEVICE"
1540        LogAll "       Make sure your USB device is plugged in"
1541        MindiExit -1
1542    fi
1543    echo -en "."
1544    # Some distro do auto mount at that point (Ubuntu)
1545    LogFile "INFO: Unmounting $USBPART just in case"
1546    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1547    # If your key has no MBR it may cause an issue
1548    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1549    if [ -r $MBRFILE ]; then
1550        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1551        dd if=$MBRFILE of=$USBDEVICE
1552    else
1553        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1554        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1555    fi
1556    LogFile "INFO: Preparing $USBDEVICE"
1557    cat > $MINDI_TMP/fdisk.txt << EOF
1558d
1559d
1560d
1561d
1562n
1563p
15641
1565
1566
1567t
1568b
1569a
15701
1571w
1572EOF
1573    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1574    if [ $? -ne 0 ]; then
1575        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1576        LogAll "       Make sure your USB device is plugged in"
1577        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1578        MindiExit -1
1579    fi
1580    LogFile "fdisk build file"
1581    LogFile "----------------"
1582    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1583    LogFile "----------------"
1584    rm -f $MINDI_TMP/fdisk.txt
1585    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1586    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1587    echo -en "."
1588    # Calling kpartx in case devices were not created
1589    if [ -x "/sbin/kpartx" ]; then
1590        /sbin/kpartx -a $USBDEVICE
1591    fi
1592    # Some distro do auto mount at that point (Ubuntu)
1593    LogFile "INFO: Unmounting $USBPART just in case again"
1594    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1595    echo -en "."
1596    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1597    if [ "`which dmsetup`" != "" ]; then
1598        block_id="`echo $USBPART | sed 's/\/dev\///g'`"
1599        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1600            LogFile "INFO: Removing $block_id from device mapper."
1601            sleep 1
1602            dmsetup remove $block_id
1603        fi
1604    fi
1605    echo -en "."
1606    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1607    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1608    if [ $? -ne 0 ]; then
1609        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1610        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1611        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1612        MindiExit -1
1613    fi
1614    echo -en "."
1615    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1616    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1617    if [ $? -ne 0 ]; then
1618        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1619        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1620        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1621        MindiExit -1
1622    fi
1623    echo -en "."
1624    mkdir -p $MINDI_TMP/usb/images
1625    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1626    echo -en "."
1627    LogFile "INFO: mindi_lib = $MINDI_LIB"
1628    for i in memdisk memtest.bin memtest.img ; do
1629        j=$MINDI_LIB/$i
1630        k=$MINDI_TMP/usb
1631        if [ -e "$j" ] ; then
1632            LogIt "INFO: Copying $j to $k"
1633            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1634            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1635        fi
1636    done
1637    echo -en "."
1638    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1639    echo -en "."
1640    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1641    echo -en "."
1642    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1643    echo -en "."
1644    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1645    echo -en "."
1646    LogAll "----------- syslinux's conf --------------"
1647    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1648    LogAll "------------------------------------------"
1649    umount $MINDI_TMP/usb
1650    if [ "$ARCH" != "ia64" ] ; then
1651        syslinux -v 2>&1 | grep -q 4.02
1652        if [ $? -eq 0 ]; then
1653            # This buggy version of syslinux requires a call to --stupid and not -s
1654            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1655            res=$?
1656        else
1657            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1658            res=$?
1659        fi
1660        if [ $res -ne 0 ] ; then
1661            LogAll "----------- syslinux's errors --------------"
1662            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1663            LogAll "------------------------------------------"
1664            LogIt "ERROR: Failed to create USB image."
1665        else
1666            echo -e "$DONE"
1667            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1668        fi
1669        rm -f $MINDI_TMP/syslinux.log
1670    else
1671        LogAll "ERROR: No USB boot support for ia64"
1672        MindiExit -1
1673    fi
1674}
1675
1676
1677MakeMessageFile() {
1678   
1679    if [ -x "/bin/lsb_release" ]; then
1680        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1681    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1682        DESC="Arch Linux"
1683        if [ -r /var/log/pacman.log ]; then
1684            # there are no releases but we can get the last system upgrade
1685            # Output example:   Arch Linux [2011-03-03 01:39]
1686            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1687        fi
1688    elif [ -r /etc/issue.net ]; then
1689        DESC=`head -1 /etc/issue.net`
1690    elif [ -r /etc/issue ]; then
1691        DESC=`head -1 /etc/issue`
1692    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1693        # For pb >= 0.9.8
1694        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1695    else
1696        DESC="Unknown desc"
1697    fi
1698    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1699    if [ _"$MONDO_SHARE" != _"" ]; then
1700        if [ "$CDRECOVERY" != "yes" ] ; then
1701            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1702                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1703                echo -en "$BOOT_MEDIA_MESSAGE"
1704            elif [ ! "$MINDI_TMP" ] ; then
1705                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1706                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1707                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1708                fi
1709            else
1710                echo -en "$BOOT_MEDIA_MESSAGE"
1711            fi
1712        else
1713            echo -en "\
1714To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1715CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1716        fi
1717    fi
1718
1719    # Also create the other help screens
1720    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1721    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1722    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1723}
1724
1725
1726MakeBootConfFile() {
1727    local options i ooo
1728    options=""
1729    # Type of boot file (elilo or syslinux/isolinux)
1730    type=$1
1731    if [ "$type" = "elilo" ]; then
1732        sep="="
1733    else
1734        sep=" "
1735    fi
1736
1737    # Generic header for conf file
1738    if [ "$type" != "elilo" ] ; then
1739        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1740    else
1741        echo -en "prompt\n"
1742    fi
1743
1744    # Compute which default option to boot from
1745    if [ "$CDRECOVERY" = "yes" ] ; then
1746        echo -en "default${sep}RESTORE\n"
1747    # In case it's mondoarchive
1748    elif [ _"$MONDO_SHARE" != _"" ]; then
1749        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1750            echo -en "default${sep}iso\n"
1751        else
1752            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1753        fi
1754    else
1755        echo -en "default${sep}expert\n"
1756    fi
1757
1758    # Handle timeout
1759    if [ "$CDRECOVERY" != "yes" ] ; then
1760        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1761    else
1762        echo -en "timeout${sep}10000\n"
1763    fi
1764    echo -en "\n"
1765
1766    # prepare which labels will be generated
1767    if [ "$CDRECOVERY" = "yes" ] ; then
1768        options="RESTORE expert"
1769    else
1770        if [ _"$MONDO_SHARE" != _"" ]; then
1771            options="interactive expert compare iso nuke isonuke"
1772        else
1773            options="expert"
1774        fi
1775    fi
1776
1777    # Generate rest of conf file
1778    for i in $options ; do
1779        ooo=$i
1780        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1781        if [ "$type" = "elilo" ]; then
1782            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1783        else
1784            ps="/"
1785            if [ "$type" = "syslinux" ]; then
1786                ps=""
1787            fi
1788            if [ $KERNEL_IS_XEN = "no" ]; then
1789                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1790            else
1791                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1792            fi
1793        fi
1794        echo -en "$outstr"
1795    done
1796    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1797        if [ "$type" = "elilo" ]; then
1798            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1799            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1800        else
1801            ps="/"
1802            if [ "$type" = "syslinux" ]; then
1803                ps=""
1804            fi
1805            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1806            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1807        fi
1808    fi
1809}
1810
1811
1812PrepareBootDiskImage_LILO() {
1813    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1814    imagesdir=$MINDI_CACHE
1815    kernelpath=$1
1816
1817    retval=0
1818
1819    old_pwd=`pwd`
1820    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1821    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1822    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1823    echo -en "..."
1824    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1825    mkdir -p $mountpoint
1826    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1827    LogFile "Creating vfat filesystem on $imagefile" 
1828    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1829    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1830
1831    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1832    mkdir -p $mountpoint/etc
1833    liloconf=$mountpoint/elilo.conf
1834
1835    MakeBootConfFile elilo > $liloconf
1836
1837    # Copy it so that CD-ROM menu entry is satisfied
1838    mountefi=0
1839    df -T | grep /boot/efi | grep -q vfat
1840    if [ $? -ne 0 ]; then
1841        mount /boot/efi
1842        if [ $? -ne 0 ]; then
1843            echo "You have to mount your EFI partition when using mindi"
1844            MindiExit -1
1845        fi
1846        mountefi=1
1847    fi
1848    el=`find /boot/efi -name elilo.efi`
1849    cp $el $mountpoint
1850    cp $liloconf $mountpoint
1851    if [ $mountefi -eq 1 ]; then
1852        umount /boot/efi 2>&1 > /dev/null
1853    fi
1854
1855    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1856    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1857    if [ "$?" -ne "0" ] ; then
1858        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1859        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1860        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1861        rm -f $MINDI_TMP/mtpt.$$
1862        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1863        retval=$(($retval+1))
1864    fi
1865    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1866
1867    mkdir -p $mountpoint/tmp
1868    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1869        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1870    fi
1871
1872    # copy the kernel across
1873    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1874    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1875    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1876    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1877    if [ "$?" -ne "0" ] ; then
1878        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1879        du -sk $mountpoint/* >> $LOGFILE
1880        LogFile "--- end of list of files ---"
1881        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1882        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1883        cd "$old_pwd"
1884        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1885        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1886    #   losetup /dev/loop0 -d
1887        [ "$imagefile" != "" ] && rm -f $imagefile
1888        LogIt "ERROR: Sorry, your kernel is too big for your image"
1889        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1890        return 0
1891    fi
1892    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1893    LogFile "INFO: Free space left on image = $free_space KB"
1894    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1895    # make it bootable
1896    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1897    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1898    if [ "$KERN_DISK_MADE" ] ; then
1899        LogFile "INFO: Not running LILO. It's not that kind of disk."
1900    fi
1901
1902    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1903    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1904    echo -en "..."
1905    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1906    if [ "$retval" -eq "0" ] ; then
1907        echo -en "...$DONE\n"
1908        if [ "$KERN_DISK_MADE" ] ; then
1909            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1910        fi
1911    else
1912        echo -en "...failed\n"
1913        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1914        [ "$imagefile" != "" ] && rm -f $imagefile
1915    fi
1916    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1917    return $retval
1918}
1919
1920
1921PrepareBootDiskImage_ISOLINUX() {
1922    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1923    imagesdir=$MINDI_CACHE
1924    kernelpath=$1
1925    do_boot_root_thingy=""
1926    retval=0
1927
1928    old_pwd=`pwd`
1929    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1930    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1931    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1932    echo -en "..."
1933    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1934    mkdir -p $mountpoint
1935    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1936    LogFile "INFO: Creating vfat filesystem on $imagefile"
1937    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1938    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1939    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1940
1941    # Only move it now to its final destination and use it now
1942    mv $imagefile $imagesdir
1943    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1944
1945    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1946
1947    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1948    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1949    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1950    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1951    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1952    if [ "$?" -ne "0" ] ; then
1953        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1954        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1955        LogAll "       Please unload some of your modules and try again."
1956        rm -f $MINDI_TMP/mtpt.$$
1957        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1958        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1959        retval=$(($retval+1))
1960    fi
1961
1962    mkdir -p $mountpoint/tmp
1963    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1964        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1965    fi
1966
1967    # copy the kernel across
1968    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1969    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1970    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1971
1972    retval=0
1973    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1974    retval=$?
1975    if [ $KERNEL_IS_XEN = "yes" ]; then
1976        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1977        let retval+=$?
1978    fi
1979 
1980    if [ "$retval" -ne "0" ] ; then
1981        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1982        du -sk $mountpoint/* >> $LOGFILE
1983        LogFile "--- end of list of files ---"
1984        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1985        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1986        cd "$old_pwd"
1987        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1988        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1989
1990        LogIt "ERROR: Sorry, your kernel is too big for your image"
1991        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1992    fi
1993    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1994    LogFile "INFO: Free space left on image = $free_space KB"
1995    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1996
1997    # make it bootable
1998    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1999    mkdir -p $mountpoint/etc
2000    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2001    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2002    echo -en "..."
2003    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2004
2005    if [ "$retval" -eq "0" ] ; then
2006        echo -en "...$DONE\n"
2007        if [ "$KERN_DISK_MADE" ] ; then
2008            [ "$imagefile" != "" ] && rm -f $imagefile
2009            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2010        fi
2011    else
2012        echo -en "...failed\n"
2013        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2014        [ "$imagefile" != "" ] && rm -f $imagefile
2015    fi
2016    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2017    return $retval
2018}
2019
2020
2021ParseModprobeForIncludes() {
2022local MODPROBE_CONF mpincfile includes include
2023
2024MODPROBE_CONF=/etc/modprobe.conf
2025mpincfile=$1
2026touch $mpincfile
2027if [ -a $MODPROBE_CONF ]; then
2028    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2029    if [ -n "$includes" ]; then
2030        for include in $includes
2031        do
2032            if [ -a "$include" ]; then
2033                echo $include >> $mpincfile
2034            fi
2035        done
2036    fi
2037fi
2038}
2039
2040
2041PrepareDataDiskImages() {
2042    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2043
2044    imagesdir=$MINDI_CACHE
2045    rm -f $imagesdir/mindi.iso
2046    needlist=$MINDI_TMP/what-we-need.txt
2047    bigdir=$MINDI_TMP/bigdir
2048    mkdir -p $bigdir/usr/bin
2049    mkdir -p $bigdir/usr/sbin
2050    includefile=$MINDI_TMP/$$.includefile.txt
2051
2052    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2053    if [ -e "$DEPLIST_FILE" ]; then
2054        lfiles="$DEPLIST_FILE $lfiles"
2055    fi
2056    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2057    ParseModprobeForIncludes $includefile
2058    lines=$(($lines+`cat $includefile | wc -l`))
2059    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2060    res=$?
2061    rm -f $includefile
2062    ListKernelModulePaths >> $needlist
2063    if [ "$res" -ne "0" ] ; then
2064        Die "You have $res files present in dependency list\nbut absent from filesystem."
2065    fi
2066    mkdir -p $bigdir/tmp
2067    if [ _"$MONDO_SHARE" != _"" ]; then
2068        # BCO: no reason to have the cfg file stored twice
2069        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2070        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2071    fi
2072
2073    # Needs to be done after the MRCFG creation
2074    FindAndAddUserKeyboardMappingFile
2075
2076    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2077    DropOptimizedLibraries $needlist $bigdir
2078    echo -en "Assembling dependency files"
2079
2080    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2081
2082    # also copy io.sys and msdos.sys, if we can find them
2083    for i in `mount | cut -d' ' -f3` ; do
2084        for j in io.sys msdos.sys ; do
2085            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2086        done
2087    done
2088
2089    # master boot record, too
2090    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2091    if [ "$i" ] ; then
2092        LogAll "INFO: Backing up $i's MBR"
2093        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2094        sleep 1
2095        sync
2096        j=$i
2097        [ -h "$j" ] && j=`readlink -f $j`
2098        LogAll "INFO: Creating /dev/boot_device ($j)"
2099        mkdir -p $bigdir/dev
2100        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2101    fi
2102
2103    old_pwd=`pwd`
2104    cd "$bigdir"
2105
2106    # Get terminfo content
2107    ti="usr/share/terminfo/l"
2108    if [ -d /$ti ]; then
2109        mkdir -p $ti
2110        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2111    fi
2112    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2113        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2114        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2115    fi
2116    if [ -d "/lib/dev-state" ]; then 
2117        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2118    fi
2119    cd "$old_pwd"
2120    echo -e "$DONE"
2121    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2122    MakeMountlist $MINDI_TMP/mountlist.txt
2123    CheckMountlist $MINDI_TMP/mountlist.txt
2124    mkdir -p $bigdir/tmp
2125    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2126    if [ _"$MONDO_SHARE" != _"" ]; then
2127        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2128    fi
2129    if [ $LVM != "false" ]; then
2130        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2131        if [ "$?" -ne "0" ]; then
2132            LVM="false"
2133            rm -f $bigdir/tmp/i-want-my-lvm
2134        else
2135            LogFile "Your i-want-my-lvm file content is:"
2136            LogFile "-----------------------------------"
2137            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2138            LogFile "-----------------------------------"
2139        fi
2140    fi
2141    LogFile "Your mountlist.txt file content is:"
2142    LogFile "-----------------------------------"
2143    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2144    LogFile "-----------------------------------"
2145
2146    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2147    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2148    if [ _"$MONDO_SHARE" != _"" ]; then
2149        for q in filelist.full.gz biggielist.txt ; do
2150            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2151            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2152        done
2153    fi
2154
2155    echo -en "Tarring and zipping the data content..."
2156    size_of_all_tools=`du -sk $bigdir | cut -f1`
2157    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2158    LogFile "Size of the data content"
2159    LogFile "------------------------"
2160    du -sk $imagesdir/*gz >> $LOGFILE
2161    LogFile "------------------------"
2162    echo -e "$DONE"
2163
2164    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2165    rm -rf $bigdir
2166    rm -f $needlist
2167}
2168
2169
2170Prompt() {
2171    echo -en "$1"
2172    read line
2173}
2174
2175
2176ReadLine() {
2177    local i incoming
2178    read incoming
2179    i=0
2180    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2181        i=$(($i+1))
2182        read incoming
2183    done
2184    echo "$incoming"
2185}
2186
2187
2188SizeOfPartition() {
2189    local devpath drive res stub
2190    device=$1
2191    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2192        Die "Cannot find $device's size - is your /etc/fstab sane?"
2193    fi
2194    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2195        res=`SizeOfRaidPartition $device`
2196        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2197        echo "$res"
2198        return 0
2199    fi
2200    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2201    res=`$FDISK -s $device 2>> $LOGFILE`
2202    # end patch
2203    # take only the first in case of multiple mount (cifs, nfs, ...)
2204    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2205    [ "$res" = "" ] && res="-1"
2206    echo $res
2207    return 0
2208}
2209
2210
2211SizeOfRaidPartition() {
2212    local real_dev smallest_size silly tmp
2213
2214    silly=999999999
2215    smallest_size=$silly
2216
2217    for real_dev in `GetRaidDevMembers $1` ; do
2218        tmp=`SizeOfPartition $real_dev`
2219        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2220    done
2221
2222    if [ "$smallest_size" = "$silly" ] ; then
2223        echo "-1"
2224        return 1
2225    else
2226        echo "$smallest_size"
2227        return 0
2228    fi
2229}
2230
2231
2232StripExecutable()
2233{
2234    local tmpfile
2235
2236    tmpfile=$MINDI_TMP/stripped.$$.dat
2237    [ -d "$1" ] || [ -h "$1" ] && return
2238    cp -f $1 $tmpfile 2>> $LOGFILE
2239    strip $tmpfile 2> /dev/null
2240    if [ "$?" -eq "0" ] ; then
2241        cp -f $tmpfile $1 2>> $LOGFILE
2242        LogFile "INFO: Stripped binary $2"
2243    fi
2244    rm -f $tmpfile
2245}
2246
2247KernelVer() {
2248        local fkern_ver fname
2249
2250        fname=$1
2251        file $fname | grep -q gzip
2252        if [ "$?" -eq "0" ] ; then
2253            # Used by ia64
2254            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2255        else
2256            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2257        fi
2258        echo "$fkern_ver"
2259}
2260
2261
2262# WARNING: This function should just echo the final result !!!
2263#
2264TryToFindKernelPath() {
2265    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2266
2267    we_want_version=$KERVERRUN
2268    possible_kernels=""
2269    duff_kernels=""
2270    output=""
2271
2272    if [ "$ARCH" = "ia64" ] ; then
2273       root="/boot/efi/efi"
2274    else
2275       root="/"
2276    fi
2277    # See if we're booted from a Xen kernel
2278    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2279    if [ -f /proc/xen/capabilities ]; then
2280        # It's a Xen kernel
2281        KERNEL_IS_XEN="yes"
2282        LogFile "INFO: It's a Xen kernel..."
2283    fi
2284
2285    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2286        [ ! -e "$fname" ] && continue
2287        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2288        fkern_ver=`KernelVer $fname`
2289        [ "$fkern_ver" = "" ] && continue
2290        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2291        [ -f "$fname" ] || continue
2292        [ -h "$fname" ] && continue
2293        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2294        file $fname | grep -q gzip
2295        if [ "$?" -eq "0" ] ; then
2296            # Used by ia64
2297            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2298                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2299                duff_kernels="$fname $duff_kernels"
2300            else
2301                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2302                possible_kernels="$fname $possible_kernels"
2303            fi
2304        else
2305            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2306                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2307                duff_kernels="$fname $duff_kernels"
2308            else
2309                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2310                possible_kernels="$fname $possible_kernels"
2311            fi
2312        fi
2313    done
2314    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2315        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2316    fi
2317    if [ ! "$possible_kernels" ] ; then
2318        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2319        possible_kernels="$duff_kernels"
2320        if [ ! "$possible_kernels" ] ; then
2321            LogAll "INFO: Sorry, no duff kernels either"
2322        else
2323            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2324            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2325        fi
2326    fi
2327    if [ $KERNEL_IS_XEN = "yes" ]; then
2328        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2329        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2330    fi
2331    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2332    noof_kernels=`CountItemsIn "$possible_kernels"`
2333    if [ "$noof_kernels" -eq "0" ] ; then
2334        LogAll "Could not find your kernel."
2335        if [ -e "/boot/vmlinuz" ] ; then
2336            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2337            output=/boot/vmlinuz
2338        else
2339            output=""
2340        fi
2341    elif [ "$noof_kernels" -eq "1" ] ; then
2342        kp=`echo "$possible_kernels" | sed s/' '//`
2343        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2344        output="$kp"
2345    else
2346        for i in $possible_kernels ; do
2347            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2348                LogAll "INFO: OK, I used my initiative and found that "
2349                LogAll "INFO: $i is probably your kernel. "
2350                output="$i"
2351                break
2352            fi
2353        done
2354        if [ ! -n "$output" ]; then
2355            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2356                output=/boot/vmlinuz
2357                LogFile "INFO: Schlomo, this one's for you."
2358            else
2359                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2360                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2361                LogFile "INFO: $possible_kernels"
2362                output=""
2363            fi
2364        fi
2365    fi
2366    if [ $KERNEL_IS_XEN = "yes" ]; then
2367        if [ "$noof_xenkernels" -eq "0" ]; then
2368            xenkernelpath=""
2369        elif [ "$noof_xenkernels" -eq "1" ]; then
2370            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2371            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2372        else
2373            for i in $possible_xenkernels ; do
2374                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2375                    LogFile "INFO: OK, I used my initiative and found that "
2376                    LogFile "INFO: $i is probably your Xen kernel. "
2377                    xenkernelpath="$i"
2378                    break
2379                fi
2380            done
2381            if [ ! -n "$xenkernelpath" ]; then
2382                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2383                if [ ! -n "$new_possible_xenkernels" ]; then
2384                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2385                    LogFile "INFO: Using $xenkernelpath"
2386                else
2387                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2388                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2389                    LogFile "INFO: $possible_xenkernels"
2390                    output=""
2391                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2392                    LogFile "INFO: Using $xenkernelpath"
2393                fi
2394            fi
2395        fi
2396        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2397            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2398        fi
2399    fi
2400    #LogAll "TryToFindKernelPath found $output"
2401    echo "$output"
2402}
2403
2404
2405TurnTgzIntoRdz() {
2406    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2407
2408    tgz_dir_fname=$1
2409    rdz_fname=$2
2410    kernelsize=$3
2411    maxsize=$(($BOOT_SIZE-$kernelsize))
2412    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2413    tempfile=$MINDI_TMP/temp.rd
2414    res=0
2415    echo -en "..."
2416    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2417    echo -en "..."
2418    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2419    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2420    echo -en "..."
2421    mkdir -p $mountpoint
2422    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2423    echo -en "..."
2424    old_pwd=`pwd`
2425    cd "$mountpoint"
2426
2427    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2428    for d in bin sbin lib lib64; do
2429        if [ -h "/$d" ]; then
2430            thelink=`readlink /$d`
2431            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2432            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2433            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2434                rmdir $mountpoint/$d
2435            fi
2436            if [ ! -h $mountpoint/$d ]; then
2437                rm -f $mountpoint/$d 2> /dev/null
2438                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2439            fi
2440        fi
2441    done
2442
2443    LogFile "INFO: what is now in $mountpoint"
2444    ls -alR $mountpoint >> $LOGFILE
2445   
2446    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2447    # copy from rootfs into mountpoint
2448    for f in $tgz_dir_fname/*; do 
2449        if [ ! -r $f ]; then
2450            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2451        else
2452            cp -af $f . 2>&1 >> $LOGFILE
2453        fi
2454    done
2455    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2456    ln -sf usr/sbin/init linuxrc
2457
2458    cd dev || Die "Can't cd to dev"
2459    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2460    rm -f dev-entries.tgz
2461    cd ..
2462
2463    for w in insmod.static insmod.static.old ; do
2464        s=`which $w 2> /dev/null`
2465        if [ -e "$s" ] ; then
2466            tar cf - -C / $s 2> /dev/null | tar xf -
2467        fi
2468    done
2469
2470    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2471   
2472    # Copy of files mandatory for ssh to automate mount if sshfs is used
2473    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2474    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2475    cat > $mountpoint/tmp/myssh << EOF
2476ssh -o StrictHostKeyChecking=no $*
2477EOF
2478    chmod 755 $mountpoint/tmp/myssh
2479
2480    # Copy of files mandatory for ld.so
2481    cp -a /etc/ld.so.c* $mountpoint/etc
2482
2483    # Handle the case where busybox and mount are dynamically linked
2484    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2485    if [ $? -eq 0 ]; then
2486        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2487        rm -f bin/mount
2488    fi
2489
2490    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2491    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2492    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2493        if [ -d $f ]; then
2494            for g in `find $f`; do 
2495                echo $g >> $MINDI_TMP/minimal.lis
2496                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2497            done
2498        else 
2499            if [ -r $f ]; then
2500                echo $f >> $MINDI_TMP/minimal.lis
2501                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2502            fi
2503        fi
2504    done
2505    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2506        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2507    done
2508    # Initial / are trucated by tar
2509    finallist=""
2510    # Remove directories from the list, as tar/cp will create them anyway
2511    # and it may hurt if /lib is in it as on Debian/Ubuntu
2512    # recent bash says that -d is true for a link to a dir !
2513    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2514        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2515            # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2516            if [ ! -e "$mountpoint/$f" ]; then
2517                finallist="$finallist $f"
2518            fi
2519        fi
2520    done
2521    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2522
2523    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2524    echo "INFO: Copy the minimal env with cp -a --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2525    cp -a --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2526
2527    # In case target /bin dir still doesn't exist, create it before using it
2528    if [ ! -d $mountpoint/bin ]; then
2529        mkdir -p $mountpoint/bin
2530    fi
2531
2532    # For older distributions expecting /sbin/init provides it
2533    if [ ! -e sbin/init ]; then
2534        (cd sbin ; ln -sf ../usr/sbin/init .)
2535    fi
2536
2537    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2538    ln -sf /bin/bash bin/sh
2539    LogIt "INFO: Using bash as default shell"
2540
2541    # Avoids an issue on some distro (RHEL5)
2542    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2543
2544    mkdir -p $mountpoint/tmp
2545    # Management of udev (which includes modprobe in rules)
2546    ps auxww | grep -v grep | grep -qw udevd
2547    if [ $? -eq 0 ]; then
2548        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2549        LogIt "INFO: udev device manager found"
2550        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2551        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2552        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2553        # Do not do it if it's a link (Ubuntu 64 bits #503)
2554        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2555            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2556        fi
2557        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2558            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2559        fi
2560        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2561            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2562        fi
2563        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2564            tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2565        fi
2566        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2567            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2568            lis=""
2569            # Get only the files which exist in that list
2570            # and potentially their symlink structure
2571            for i in $lis2; do
2572                if [ -h $i ]; then
2573                    j=$i
2574                    while [ -h $j ]; do
2575                        lis="$lis $j"
2576                        j=`readlink -f $j`
2577                    done
2578                    lis="$lis $j"
2579                elif [ -f $i ]; then
2580                    lis="$lis $i"
2581                fi
2582            done
2583            # And their deps
2584            LocateDeps $lis > $MINDI_TMP/udev.lis
2585            for i in $lis; do
2586                if [ "`echo $i | cut -c1`" = "/" ]; then
2587                    j=`echo $i | cut -c2-`
2588                    [ "$j" != "" ] && rm -f $j
2589                fi
2590                echo "$i" >> $MINDI_TMP/udev.lis
2591            done
2592            finallist=""
2593            # Remove directories from the list, as tar/cp will create them anyway
2594            # and it may hurt if /lib is in it as on Debian/Ubuntu
2595            # recent bash says that -d is true for a link to a dir !
2596            for f in `sort -u $MINDI_TMP/udev.lis`; do
2597                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2598                    # Do not overwrite files already in destination (avoid using option -n of cp not portable)
2599                    if [ ! -e "$mountpoint/$f" ]; then
2600                        finallist="$finallist $f"
2601                    fi
2602                fi
2603            done
2604            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2605            echo "INFO: Copying udev related files with cp -a --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2606            cp -a --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2607            rm -f $MINDI_TMP/udev.lis
2608        else
2609            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2610            LogAll "         mindi will use static devices which may cause problems"
2611            rm -f $mountpoint/tmp/USE-UDEV
2612        fi
2613    fi
2614
2615    # Management of potential HW info (ProLiant only at the moment)
2616    rm -rf $MINDI_CACHE/bkphw
2617    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2618    if [ -d $MINDI_CACHE/bkphw ]; then
2619        LogIt "INFO: Hardware Information found and saved ..."
2620        cp -rp $MINDI_CACHE/bkphw .
2621        if [ -f $MINDI_CACHE/tools.files ]; then
2622            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2623            LocateDeps $lis > $MINDI_TMP/tools.lis
2624            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2625        fi
2626        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2627            mv -f $MINDI_CACHE/mindi-rsthw .
2628            chmod 755 ./mindi-rsthw
2629        fi
2630        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2631    fi
2632
2633    # Management of perl scripts delivered needed at restore time
2634    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2635    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2636
2637    for w in cdrom groovy-stuff ; do
2638        mkdir -p mnt/$w
2639    done
2640
2641    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2642
2643    echo -en "..."
2644    cd /
2645
2646    needed_modules=""
2647    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2648
2649    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2650        # For PXE boot
2651        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2652    fi
2653    for i in $DENY_MODS; do
2654        LogFile "INFO: Removing $i from the list of modules to load"
2655        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2656    done
2657
2658    if [ "${kernelname}" != "" ]; then
2659        needed_modules_path=lib/modules/${kernelname}
2660        mkgmopt="-k ${kernelname}"
2661    else
2662        needed_modules_path=lib/modules/$KERVERRUN
2663        mkgmopt="-k $KERVERRUN"
2664    fi
2665
2666    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2667    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2668
2669    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2670    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2671
2672    # Uncompress modules if not using udev and native modprobe
2673    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2674        for i in $needed_modules; do
2675            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2676                gunzip -f $mountpoint/$i
2677            fi
2678            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2679                bunzip2 -f $mountpoint/$i
2680            fi
2681            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2682                unxz -f $mountpoint/$i
2683            fi
2684            LogFile "INFO: Uncompressing $i"
2685        done
2686    fi
2687
2688    # Also copy modules.* in case of udev so that normal modprobe works
2689    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2690
2691    # Copy FW in case some drivers needs it
2692    for d in "/lib" "/usr/lib"; do
2693        if [ -d "$d/firmware" -a ! -h $d ]; then
2694            cp -a "$d/firmware" "$mountpoint/$d"
2695        fi
2696    done
2697
2698    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2699    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2700        if [ -d "$d/multipath" -a ! -h $d ]; then
2701            cp -a "$d/multipath" "$mountpoint/$d"
2702        fi
2703    done
2704
2705    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2706    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e $mountpoint/bin/$i ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2707
2708    # Copy an additional ProLiant tool for OBDR support
2709    if [ -f $MINDI_TMP/OBDR ]; then
2710        found=0
2711        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2712            mkdir -p $mountpoint/usr/bin
2713            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2714            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2715            found=1
2716        fi
2717        if [ -x /usr/bin/sg_wr_mode ]; then
2718            mkdir -p $mountpoint/usr/bin
2719            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2720            LocateDeps $lis > $MINDI_TMP/obdr.lis
2721            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2722            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2723            found=1
2724        fi
2725        if [ $found -eq 0 ]; then
2726            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2727            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2728        fi
2729    fi
2730
2731    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2732        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2733        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2734        rm -f $mountpoint/sbin/devfsd
2735    fi
2736    cd "$old_pwd"
2737    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2738    if [ _"$MONDO_SHARE" != _"" ]; then
2739        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2740        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2741        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2742        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2743        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2744    fi
2745
2746    # Create module list to load at restore time
2747    rm -f $mountpoint/tmp/modules
2748    for m in $CDROM_MODS; do
2749        echo $m >> $mountpoint/tmp/modules
2750    done
2751
2752    mkdir -p $mountpoint/proc
2753    LogFile "---------------------------"
2754    LogFile "Size of initial ramdisk:"
2755    LogFile "---------------------------"
2756    (cd "$mountpoint" ; du -sh .) >> $LOGFILE
2757    LogFile "---------------------------"
2758    LogFile "Content of initial ramdisk:"
2759    LogFile "---------------------------"
2760    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2761    LogFile "---------------------------"
2762
2763    # Determine what filesystem to use for initrd image
2764    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2765    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2766    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2767    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2768        # say what will be used
2769        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2770        # kernel expects linuxrc in ext2 filesystem
2771        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2772        # unmount loop filesystem and create image file using the standard approach
2773        umount $mountpoint || Die "Cannot unmount $tempfile"
2774        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2775        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2776            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2777        else
2778            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2779        fi
2780        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2781        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2782        rm -f ${rdz_fname}.tmp
2783        # log that we are done
2784        LogFile "      ...done."
2785    elif [ "$gvFileSystem" = "initramfs" ]; then
2786        # say what will be used
2787        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2788        # make sure that cpio is there
2789        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2790        # go into filesystem
2791        cd "$mountpoint"
2792        # kernel expects init in cpio filesystem
2793        ln -sf usr/sbin/init init
2794        # create cpio image file and unmount loop filesystem
2795        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2796        cd "$old_pwd"
2797        umount $mountpoint || Die "Cannot unmount $tempfile"
2798        # log that we are done
2799        LogFile "      ...done."
2800    else
2801        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2802    fi
2803
2804    if [ "$res" -eq "0" ] ; then
2805        echo -en "..."
2806    else
2807        echo -en "\rMade an rdz WITH ERRORS.           \n"
2808    fi
2809    return 0
2810}
2811
2812
2813##############################################################################
2814#----------------------------------- Main -----------------------------------#
2815##############################################################################
2816
2817# Now we can create what we need
2818mkdir -p $MINDI_TMP
2819
2820# Purge from potential old run
2821if [ _"$MINDI_CACHE" = _"" ]; then
2822    Die "MINDI_CACHE undefined"
2823fi
2824
2825# --nolog needs to be first, and is used in analyze-my-lvm
2826if [ "$1" = "--nolog" ] ; then
2827    shift
2828    LOGFILE=/dev/stderr
2829else
2830    > $LOGFILE
2831fi
2832if [ "$1" = "--printvar" ] ; then
2833    shift
2834    if [ _"$1" != _"" ] ; then
2835        set | grep -Ew "^$1" | cut -d= -f2
2836    fi
2837    exit 0
2838fi
2839
2840LogFile "mindi v$MINDI_VERSION"
2841LogFile "$ARCH architecture detected"
2842LogFile "mindi called with the following arguments:"
2843echo "$@">> $LOGFILE
2844LogFile "Start date : `date`"
2845LogFile "-----------------------------"
2846
2847[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2848
2849# Log some capital variables
2850[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2851[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2852LogFile "MONDO_SHARE = $MONDO_SHARE"
2853LogFile "MINDI_LIB = $MINDI_LIB"
2854LogFile "MINDI_SBIN = $MINDI_SBIN"
2855LogFile "MINDI_CONF = $MINDI_CONF"
2856if [ -f $MINDI_CONFIG ]; then
2857    LogFile "-----------------------------"
2858    LogFile " Mindi configuration file    "
2859    LogFile "-----------------------------"
2860    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2861    LogFile "-----------------------------"
2862fi
2863LogFile "In Mindi"
2864LogFile "--------"
2865LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2866LogFile "BOOT_SIZE = $BOOT_SIZE"
2867LogFile "--------"
2868
2869trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2870
2871# Sanity checks
2872which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2873which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2874which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2875which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2876if which awk &> /dev/null ; then
2877    if ! which gawk &> /dev/null ; then
2878        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2879    fi
2880fi
2881which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2882[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2883
2884[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2885
2886# Update the PATH variable if incomplete
2887if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2888    PATH=$PATH:/sbin:/usr/sbin
2889    export PATH
2890    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2891    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2892    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2893fi
2894
2895if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2896    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2897fi
2898
2899### TODO
2900### Fix as it's not mandatory on ia64
2901if [ "$ARCH" = "ia64" ] ; then
2902    if which elilo &> /dev/null ; then
2903        LILO_EXE=elilo
2904    else
2905        LILO_EXE=`which false 2> /dev/null`
2906    fi
2907else
2908    FindIsolinuxBinary
2909fi
2910trap "Aborted" SIGTERM
2911DONE="\r\t\t\t\t\t\t\t\tDone.         "
2912kernelpath=""
2913MONDO_ROOT=/var/cache/mondo
2914mkdir -p $MONDO_ROOT
2915
2916if [ -d "/proc/lvm" ]; then
2917    # LVM v1
2918    LVMCMD=""
2919    LVM="v1"
2920elif [ -d "/dev/mapper" ]; then
2921    # LVM v2
2922    LVMCMD="lvm"
2923    LVM="v2"
2924else
2925    LVM="false"
2926fi
2927
2928if [ -e "/proc/cmdline" ]; then
2929    CMDLINE="/proc/cmdline"
2930elif [ -e "/tmp/cmdline" ]; then
2931    CMDLINE="/tmp/cmdline"
2932else
2933    CMDLINE="/dev/null"
2934fi
2935
2936LogFile "INFO: LVM set to $LVM"
2937LogFile "----------"
2938LogFile "mount result:"
2939LogFile "-------------"
2940mount >> $LOGFILE
2941if [ -e /etc/raidtab ]; then
2942    LogFile "-------------"
2943    LogFile "/etc/raidtab content:"
2944    LogFile "-------------"
2945    cat /etc/raidtab >> $LOGFILE
2946else
2947    LogFile "No file /etc/raidtab"
2948fi
2949if [ -e /etc/mdadm.conf ]; then
2950    LogFile "-------------"
2951    LogFile "/etc/mdadm.conf content:"
2952    LogFile "-------------"
2953    cat /etc/mdadm.conf >> $LOGFILE
2954else
2955    LogFile "-------------"
2956    LogFile "No file /etc/mdadm.conf"
2957fi
2958LogFile "-------------"
2959LogFile "cat $CMDLINE"
2960LogFile "-------------"
2961cat $CMDLINE >> $LOGFILE
2962LogFile "-------------"
2963LogFile "cat /proc/swaps:"
2964LogFile "-------------"
2965cat /proc/swaps >> $LOGFILE
2966LogFile "-------------"
2967if [ -e /proc/mdstat ]; then
2968    LogFile "cat /proc/mdstat:"
2969    LogFile "-------------"
2970    cat /proc/mdstat >> $LOGFILE
2971else
2972    LogFile "No pseudo file /proc/mdstat"
2973fi
2974LogFile "-------------"
2975LogFile "cat /proc/partitions:"
2976LogFile "-------------"
2977cat /proc/partitions >> $LOGFILE
2978LogFile "-------------"
2979LogFile "cat /proc/filesystems:"
2980LogFile "-------------"
2981cat /proc/filesystems >> $LOGFILE
2982LogFile "-------------"
2983LogFile "lsmod result:"
2984LogFile "-------------"
2985lsmod >> $LOGFILE
2986MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2987if [ -x /usr/sbin/esxcfg-module ]; then
2988    LogFile "-------------"
2989    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2990    LogFile "-------------"
2991    LogFile "VMWare modules"
2992    LogFile "-------------"
2993    /usr/sbin/esxcfg-module -l >> $LOGFILE
2994    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2995fi
2996LogFile "-------------" 
2997LogFile "FORCE_MODS:"
2998LogFile "-------------"
2999LogFile "$FORCE_MODS"
3000LogFile "-------------"
3001LogFile "DENY_MODS:"
3002LogFile "-------------"
3003LogFile "$DENY_MODS"
3004LogFile "-------------"
3005LogFile "df result:"
3006LogFile "----------"
3007df -aT >> $LOGFILE
3008LogFile "-------------"
3009LogFile "df -i result:"
3010LogFile "----------"
3011df -i >> $LOGFILE
3012LogFile "-------------"
3013if [ -r /boot/grub/menu.lst ]; then
3014    LogFile "-------------"
3015    LogFile "INFO: /boot/grub/menu.lst content"
3016    LogFile "-------------"
3017    cat /boot/grub/menu.lst >> $LOGFILE
3018    LogFile "-------------"
3019fi
3020if [ -r /boot/grub/grub.conf ]; then
3021    LogFile "-------------"
3022    LogFile "INFO: /boot/grub/grub.conf content"
3023    LogFile "-------------"
3024    cat /boot/grub/grub.conf >> $LOGFILE
3025    LogFile "-------------"
3026fi
3027if [ -r /boot/grub/grub.cfg ]; then
3028    LogFile "-------------"
3029    LogFile "INFO: /boot/grub/grub.cfg content"
3030    LogFile "-------------"
3031    cat /boot/grub/grub.cfg >> $LOGFILE
3032    LogFile "-------------"
3033fi
3034if [ -r /boot/grub/device.map ]; then
3035    LogFile "-------------"
3036    LogFile "INFO: /boot/grub/device.map content"
3037    LogFile "-------------"
3038    cat /boot/grub/device.map >> $LOGFILE
3039    LogFile "-------------"
3040fi
3041if [ -r /etc/lilo.conf ]; then
3042    LogFile "-------------"
3043    LogFile "INFO: /etc/lilo.conf content"
3044    LogFile "-------------"
3045    cat /etc/lilo.conf >> $LOGFILE
3046fi
3047LogFile "Full fdisk info"
3048LogFile "---------------"
3049$FDISK -l >> $LOGFILE
3050LogFile "----------------"
3051
3052# Compute libata version
3053laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3054# If libata v2 is used then remove ide-generic as it will perturbate boot
3055if [ "`echo $MODULES | grep libata`" ]; then
3056    if [ "$laver" = "2" ]; then
3057        DENY_MODS="$DENY_MODS ide-generic"
3058        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3059        LogFile "-------------"
3060    fi
3061fi
3062
3063# Check for McAfee which disturbs the access to some files (tgz in articular)
3064if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3065    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3066    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3067    LogFile "WARNING: You have two options:"
3068    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3069    LogFile "WARNING:  - Disable the scanner during the backup"
3070fi
3071
3072# Check for ISO_CMD command
3073if [ ! -x $ISO_CMD ]; then
3074    LogFile "NOTE: No CD image (ISO file) utility found"
3075fi
3076
3077FLOPPY_WAS_MOUNTED=""
3078for mtpt in /media/floppy /mnt/floppy /floppy ; do
3079    if mount | grep -w $mtpt &> /dev/null ; then
3080        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3081        umount $mtpt
3082    fi
3083done
3084
3085#
3086# If we have a USB device we need to store info
3087# and remove it from the parameters line
3088#
3089if [ "$#" -ne "0" ] ; then
3090    if [ "$1" = "--usb" ] ; then
3091        shift
3092        USBDEVICE=$1
3093        if [ _"$USBDEVICE" = _"" ]; then
3094            Die "No USB device specified"
3095        fi
3096        shift
3097    fi
3098fi
3099
3100if [ "$#" -ne "0" ] ; then
3101    if [ "$1" = "--findkernel" ] ; then
3102        resk=`TryToFindKernelPath`
3103        # Avoids logfile content for mondo
3104        export MONDO_SHARE=""
3105        if [ "$resk" = "" ] ; then
3106            if [ $KERNEL_IS_XEN = "yes" ]; then
3107                echo "$xenkernelpath"
3108                LogFile "INFO: xenkernelpath = $xenkernelpath"
3109                MindiExit 0
3110            else
3111                MindiExit -1
3112            fi
3113        else
3114            echo "$resk"
3115            LogFile "INFO: kernelpath = $resk"
3116            MindiExit 0
3117        fi
3118    elif [ "$1" = "--locatedeps" ] ; then
3119        [ ! "$2" ] && Die "Please specify the binary to look at"
3120        LocateDeps $*
3121        # Avoids logfile content for mondo
3122        export MONDO_SHARE=""
3123        MindiExit $?
3124    elif [ "$1" = "--readalllink" ] ; then
3125        [ ! "$2" ] && Die "Please specify the binary to look at"
3126        # Avoids logfile content for mondo
3127        export MONDO_SHARE=""
3128        mr-read-all-link $2
3129        MindiExit $?
3130    elif [ "$1" = "--makemessage" ] ; then
3131        MakeMessageFile | cut -c1-80
3132        MindiExit 0
3133    elif [ "$1" = "--makemountlist" ] ; then
3134        [ ! "$2" ] && Die "Please specify the output file"
3135        MakeMountlist $2
3136        CheckMountlist $2
3137        # Avoids logfile content for mondo
3138        export MONDO_SHARE=""
3139        MindiExit $?
3140    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3141        echo "Mindi v$MINDI_VERSION"
3142        # Avoids logfile content for mondo
3143        export MONDO_SHARE=""
3144        MindiExit 0
3145    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3146        MONDO_TMP=$2
3147        # Change MINDI_TMP for the one provided by mondo
3148        # So that it can get back the built files
3149        if [ _"$MONDO_TMP" = _"" ]; then
3150            Die "MONDO_TMP is empty, aborting"
3151        fi
3152        if [ _"$MONDO_TMP" = _"/" ]; then
3153            Die "MONDO_TMP is /, aborting"
3154        fi
3155        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3156        rmdir $MINDI_TMP
3157        export MINDI_TMP=$MONDO_TMP
3158        mkdir -p $MINDI_TMP
3159
3160        # This is the scratch dir in mondo - subdir images
3161        MINDI_CACHE=$3
3162
3163        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3164        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3165       
3166###
3167### Sq-Modification...
3168### Attempt to locate kernel specific module path
3169### if module path is found then use it other wise use uname -r to set it...
3170###
3171        if [ $KERNEL_IS_XEN = "yes" ]; then
3172            LogAll "INFO: xenkernelpath = $xenkernelpath"
3173        fi
3174        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3175        if [ ! -d "/lib/modules/$kernelname" ]; then
3176           LogAll "WARNING: Module path for ${kernelpath} not found..."
3177           LogAll "         using running kernel\'s modules."
3178           kernelname=$KERVERRUN
3179        else
3180           LogAll "Using modules for kernel: ${kernelname}"
3181        fi
3182        LogAll "INFO: kernelname = $kernelname"
3183        LogAll "INFO: kernelpath = $kernelpath"
3184###
3185### end of Sq-Modification
3186###
3187        TAPEDEV=$5
3188        TAPESIZE=$6
3189        FILES_IN_FILELIST=$7
3190        USE_LZO=$8
3191        CDRECOVERY=$9
3192        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3193            IMAGE_DEVS=""
3194        else
3195            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3196        fi
3197        if [ "${11}" ] ; then
3198            LILO_OPTIONS=""
3199    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3200        fi
3201        LAST_FILELIST_NUMBER=${12}
3202        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3203        export MINDI_EXCLUDE_DEVS="${14}"
3204        USE_COMP="${15}"
3205        USE_LILO="${16}"
3206        USE_STAR="${17}"
3207        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3208        DIFFERENTIAL="${19}"
3209        USE_GZIP="${20}"
3210        USE_LZMA="${21}"
3211        NOT_BOOT="${22}"
3212        [ "$USE_COMP" = "" ] && USE_COMP=yes
3213        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3214        [ "$USE_LZMA" = "" ] && USE_LZMA=no
3215        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3216        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3217        # MONDO_ROOT is the real scratchdir
3218        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3219        if [ _"$MONDO_ROOT" != _"" ]; then
3220            mkdir -p $MONDO_ROOT
3221        else
3222            Die "MONDO_ROOT is undefined"
3223        fi
3224    else
3225        LogScreen "Syntax: mindi (--custom ....)"
3226        MindiExit -1
3227    fi
3228fi
3229
3230if [ _"$MINDI_CACHE" != _"" ]; then
3231    rm -rf $MINDI_CACHE/* 2> /dev/null
3232    mkdir -p $MINDI_CACHE
3233fi
3234
3235[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3236
3237if [ _"$MONDO_SHARE" = _"" ]; then
3238    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3239    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3240    LogIt "BusyBox sources are available from http://www.busybox.net"
3241    LogIt "------------------------------------------------------------------------------"
3242else
3243    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3244fi
3245if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3246    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3247else
3248    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3249    MindiExit -1
3250fi
3251
3252for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3253    modinfo $i 2> /dev/null 1> /dev/null
3254    if [ $? -eq 0 ]; then
3255        modprobe $i 2>&1 > /dev/null
3256    fi
3257done
3258
3259KERN_DISK_MADE=""
3260
3261LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3262LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3263LogFile "NOT_BOOT = '$NOT_BOOT'"
3264if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3265    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3266    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3267    MakeMountlist $MINDI_TMP/mountlist.txt
3268    CheckMountlist $MINDI_TMP/mountlist.txt
3269    mkdir -p $MINDI_TMP/small-all/tmp
3270    cd "$MINDI_TMP/small-all"
3271    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3272    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3273    sleep 2
3274    LogIt "Done. Exiting."
3275    MindiExit 0
3276fi
3277
3278if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3279    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3280fi
3281
3282if [ "$kernelpath" = "" ] ; then
3283    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3284    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3285    read ch
3286    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3287        USE_OWN_KERNEL="yes"
3288    else
3289        USE_OWN_KERNEL="no"
3290    fi
3291    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3292        kernelpath=`TryToFindKernelPath`
3293        if [ "$kernelpath" = "" ] ; then
3294            echo -n "Please enter kernel path : "
3295            read kernelpath
3296        fi
3297    fi
3298fi
3299
3300echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3301[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3302
3303mountpoint=$MINDI_TMP/mountpoint.$$
3304PrepareDataDiskImages
3305
3306export ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3307
3308LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3309if [ "$ARCH" = "ia64" ] ; then
3310    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3311else
3312    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3313fi
3314
3315[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3316...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3317
3318if [ _"$MONDO_SHARE" = _"" ]; then
3319    ListImagesForUser
3320    OfferToMakeBootableISO
3321    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3322        OfferToMakeBootableUSB
3323    fi
3324    LogAll "Finished."
3325elif [ "$TAPEDEV" ] ; then
3326    if [ "$ARCH" != "ia64" ] ; then
3327        # We need to keep the img file as boot file for ia64 platform
3328        rm -f $MINDI_CACHE/{*img,*iso}
3329    else
3330        rm -f $MINDI_CACHE/*iso
3331    fi
3332    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3333        OfferToMakeBootableUSB
3334    fi
3335    OfferToMakeBootableISO
3336    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3337        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3338    else
3339        Die "Cannot find all.tar.gz, to be written to tape"
3340    fi
3341elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3342    OfferToMakeBootableUSB
3343else
3344    OfferToMakeBootableISO
3345fi
3346# cleanup
3347LogAll "INFO: $FRIENDLY_OUTSTRING"
3348for mtpt in $FLOPPY_WAS_MOUNTED ; do
3349    mount $mtpt
3350done
3351MindiExit 0
Note: See TracBrowser for help on using the repository browser.