source: branches/3.2/mindi/mindi @ 3330

Last change on this file since 3330 was 3330, checked in by bruno, 4 years ago
  • mindi now generates UUIDs in mountlist.txt if no LABEL nor UUID exist
  • Fix label-partitions-as-necessary to put back the original UUIDs to the partitions even if no LABEL or UUID line was used in fstab
  • Improve btrfs support
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 120.3 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3330 2014-12-23 06:49:06Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000      # increase if you run out of ramdisk space
44BOOT_SIZE=65600         # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47    # Ask if you want to make a CD Image to be written?
48    # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51    # Ask if you want to make a USB Image to be written?
52    # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55    # If set to "no", you will be prompted for whether or not
56    # you want to use your own kernel, or the supplied default.
57    # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60    # If set to "no", the kernel is not a Xen kernel
61    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63 
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    Die "User abort."
224}
225
226
227AddFileToCfgIfExists() {
228    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
229}
230
231
232AddKeyboardMappingFile() {
233    local mappath r included_list included_item i res ii sss
234    mappath=$1
235    KBDEPTH=$(($KBDEPTH+1))
236    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
237    if [ -e "$bigdir/$mappath" ] ; then
238        LogFile "INFO: $mappath already added"
239        return
240    elif [ -d "$bigdir/$mappath" ] ; then
241        echo "Cannot add $mappath: it's a directory. Sorry."
242        return
243    fi
244    LogFile "INFO: Added kbd map $mappath"
245    if [ ! -e "$mappath" ] ; then
246        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
247        if [ ! -e "$mappath" ] ; then
248            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
249            return
250        fi
251    else
252        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
253    fi
254
255    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
256    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259    else
260        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261    fi
262    for included_item in $included_list ; do
263        if [ ! -e "$included_item" ] ; then
264            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266            for ii in $sss ; do
267                [ -e "$ii" ] && AddKeyboardMappingFile $ii
268            done
269        else
270            AddKeyboardMappingFile $included_item
271        fi
272    done
273}
274
275
276CopyDependenciesToDirectory() {
277    local outdir incoming counter d found tdir
278    outdir=$1
279    mkdir -p $outdir
280    incoming=`ReadLine`
281    counter=0
282    while [ "$incoming" != "" ] ; do
283        # Non absolute file names should not arrive till here => skipped
284        if [ `echo "$incoming" | cut -c1` != '/' ]; then
285            LogAll "WARNING: Unable to handle $incoming"
286            incoming=`ReadLine`
287            continue
288        fi
289        # no parent directory of incoming should be a link, copy is not possible in that case
290        d=`dirname "$incoming"`
291        found="false"
292        while [ $d != "/" -a $found = "false" ]; do
293            [ -h "$d" ] && found="true"
294            d=`dirname "$d"`
295        done
296        if [ -d "$incoming" -a ! -h "$incoming" ]; then
297            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298        elif [ -e "$incoming" ] && [ $found = "false" ]; then
299            if [ ! -h "$incoming" ]; then
300                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301            else
302                tdir=`dirname "$incoming"`
303                if [ ! -e "$outdir/$tdir" ]; then
304                    mkdir -p "$outdir/$tdir"
305                fi
306                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307            fi
308            # Only uncompress modules if not using udevd
309            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311            fi
312            [ -x "$outdir" ] && StripExecutable $outdir
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        incoming=`ReadLine`
317    done
318}
319
320
321CountItemsIn() {
322    local r
323    r=0
324    for q in $1 ; do
325        r=$(($r+1))
326    done
327    echo $r
328}
329
330
331DropOptimizedLibraries() {
332    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333    filelist=$1
334    outdir=$2
335
336    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337    if [ "$list_of_optimized_libraries" = "" ] ; then
338        return 0
339    fi
340    echo -en "Dropping i686-optimized libraries if appropriate"
341    for optimized_lib_name in $list_of_optimized_libraries ; do
342        echo -en "."
343        reason=""
344        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345        echo "$vanilla_lib_name" >> $filelist
346        LogFile "INFO: Adding $vanilla_lib_name to filelist"
347        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350        # This may return multiple files
351        for resolved in `mr-read-all-link $vanilla_lib_name`; do
352            LogFile "INFO: Adding as deps $resolved to filelist"
353            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354            if [ "$vanilla_resolved_name" != "$resolved" ]; then
355                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356                rmdir $outdir$resolved > /dev/null 2> /dev/null
357                ln -sf $vanilla_resolved_name $outdir$resolved
358                LogFile "INFO: Excluding deps $resolved" 
359                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
361                echo "$vanilla_resolved_name" >> $filelist.tmp
362                mv -f $filelist.tmp $filelist
363            fi
364        done
365    done
366    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367    mv -f $filelist.tmp $filelist
368    echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373    local r res mapfile mappath included_item included_list keyfile mp locale
374    LogAll "INFO: Analyzing your keyboard's configuration."
375    KEYDIR=/usr/lib/kbd
376    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
377    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
378    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
379    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
380    if [ ! -e "$KEYDIR" ] ; then
381        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
382        return 0
383    fi
384    if [ -e "/etc/sysconfig/keyboard" ] ; then
385        LogFile "INFO: Red Hat-style config detected."
386        keyfile=/etc/sysconfig/keyboard
387    elif [ -e "/etc/vconsole.conf" ] ; then
388        LogFile "INFO: New Fedora style config detected."
389        keyfile=/etc/vconsole.conf
390    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
391        LogFile "INFO: Slackware-style config detected."
392        keyfile=/etc/rc.d/rc.keymap
393    elif [ -e "/etc/rc.config" ] ; then
394        LogFile "INFO: Debian-style config detected."
395        keyfile=/etc/rc.config
396    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        mkdir -p $bigdir/tmp
399        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
400        KBDEPTH=0
401        mkdir -p $bigdir/etc/console
402        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
403        echo ""
404        echo -e "$DONE"
405        return 0
406    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
407        LogFile "INFO: Ubuntu-style config detected."
408        mkdir -p $bigdir/tmp
409        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
410            kbdfile="/etc/console-setup/boottime.kmap.gz"
411        else
412            kbdfile="/etc/console-setup/cached.kmap.gz"
413        fi
414        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
415        KBDEPTH=0
416        mkdir -p $bigdir/etc/console-setup
417        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
418        echo ""
419        echo -e "$DONE"
420        return 0
421    elif [ -e "/etc/rc.conf" ] ; then
422        LogFile "INFO: ArchLinux config detected."
423        keyfile=/etc/rc.conf
424    elif [ -e "/etc/conf.d/keymaps" ] ; then
425        LogFile "INFO: Gentoo-style config detected."
426        keyfile=/etc/conf.d/keymaps
427    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
428        LogFile "INFO: X11-style config detected."
429        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
430    else
431        LogFile "Searching for rc.config ..."
432        keyfile=`find /etc -name rc.config | head -n1`
433        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
434            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
435            return
436        else
437            LogFile "INFO: Found $keyfile"
438        fi
439    fi
440    if [ ! -e "$KEYDIR/keymaps" ] ; then
441        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
442        return
443    fi
444    LogFile "INFO: keyfile=$keyfile"
445    # For SLES we need to remove the .map.gz extension Cf #614
446    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
447    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
448    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
449    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
450    LogFile "INFO: locale=$locale"
451    #
452    # Process the keymaps dir once for all
453    # AddKeyboardMappingFile will use it recursively
454    #
455    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
456    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
457    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
458    # If we have multiple keymaps then log it !!
459    echo "$mp" | grep -q " " >> $LOGFILE
460    if [ $? -eq 0 ]; then
461        LogAll "WARNING: Multiple keymaps found: $mp"
462        LogFile "INFO: The following one will be used"
463    fi
464    for i in $mp ; do
465        mappath=$i
466        [ -e "$i" ] && [ ! -d "$i" ] && break
467    done
468    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
469        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
470    fi
471    LogFile "INFO: mappath = $mappath"
472    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
473        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
474        return
475    fi
476    LogAll "INFO: Adding the following keyboard mapping tables: "
477    mkdir -p $bigdir/tmp
478    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
479    KBDEPTH=0
480    AddKeyboardMappingFile $mappath
481    echo ""
482    echo -e "$DONE"
483    rm -f $MINDI_TMP/keymaps.find
484    return 0
485}
486
487
488FindLdlinux32Binary() {
489    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
490    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
491    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
492    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
495    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
496    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
497    if [ ! -e "$LDLINUXC32" ]; then 
498        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
499        LDLINUXC32=/tmp/idoesnthopefullyexist
500    else
501        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
502    fi
503}
504
505
506FindMboot32Binary() {
507    MBOOTC32=/usr/lib/syslinux/mboot.c32
508    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
514    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
515    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
516    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
517}
518
519FindIsolinuxBinary() {
520    ISOLINUX=/usr/lib/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
526    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
527    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
528    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
529    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
530}
531
532
533GenerateGiantDependencyList() {
534    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
535
536    echo -en "Analyzing dependency requirements"
537    outfile=$1
538    tempfile=$MINDI_TMP/$$.txt
539    incoming=`ReadLine`
540
541    > $tempfile
542    progress=0
543    res=0
544    noof_lines=$2
545    while [ "$incoming" != "" ] ; do
546        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
547            incoming=`ReadLine`
548            continue
549        fi
550        if [ "$incoming" = "LVMFILES:" ] ; then
551            break
552        fi
553        filelist=`GenerateListForFile "$incoming"`
554        r=$?
555        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
556        res=$(($res+$r))
557#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
558        for fname in $filelist ; do
559            [ "$fname" != "" ] && echo "$fname" >> $tempfile
560        done
561        progress=$(($progress+1))
562        LogProgress $progress $noof_lines
563        incoming=`ReadLine`
564    done
565    if  [ "$incoming" = "LVMFILES:" ] ; then
566        incoming=`ReadLine`
567        lvmversion=""
568        while [ "$incoming" != "" ] ; do
569            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
570                incoming=`ReadLine`
571                continue
572            fi
573            filelist=`GenerateListForFile "$incoming"`
574            for tool in $filelist ; do
575                lvmresolved=`readlink -f $tool`
576                if [ "$tool" = "$lvmresolved" ]; then
577                    echo "$tool" >> $tempfile
578                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
579                    if [ "$lvmversion" = "" ] ; then
580                        lvmversion=`$lvmresolved`
581                        echo "$lvmresolved" >> $tempfile
582                    fi
583                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
584                    if [ "$lvmversion" = "200" ]; then
585                        # pvdata and lvmcreate_initrd don't exist in LVM2
586                        case "$toolstripped" in
587                        "pvdata")
588                            continue
589                            ;;
590                        "lvmcreate_initrd")
591                            continue
592                            ;;
593                        esac
594                    fi
595                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
596                    if [ -e "$toolpath" ] ; then
597                        echo "$toolpath" >> $tempfile
598                        echo "$tool" >> $tempfile
599                    else
600                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
601                    fi
602                    if [ -e "$toolpath" ] ; then
603                        echo "$toolpath" >> $tempfile
604                        echo "$tool" >> $tempfile
605                    else
606                        echo "Where are your LVM-Tools? Couldn't find $tool"
607                    fi
608                else
609                    echo "$tool" >> $tempfile
610                fi
611            done
612            progress=$(($progress+1))
613            LogProgress $progress $noof_lines
614            incoming=`ReadLine`
615        done
616    fi
617    echo -en "$DONE\nMaking complete dependency list"
618
619    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
620    mv -f $tempfile.new $tempfile
621    > $outfile.pre
622    progress=0
623    noof_lines=`cat $tempfile | wc -l`
624    LogFile "---------------------------------"
625    LogFile "List of dependencies:             "
626    LogFile "---------------------------------"
627    for fname in `cat $tempfile` ; do
628        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
629        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
630        progress=$(($progress+1))
631        LogProgress $progress $noof_lines
632    done
633    if [ _"$MONDO_SHARE" != _"" ]; then
634        mkdir -p $bigdir/tmp
635        mkdir -p $bigdir/usr/bin
636        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
637            LogAll "\nINFO: Incorporating post-nuke tarball"
638            old_pwd=`pwd`
639            cd "$bigdir"
640            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
641            cd "$old_pwd"
642        fi
643        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
644            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
645        else
646            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
647            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
648            LogIt "       If Mindi was called by Mondo then send me a bug report."
649            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
650            LogIt "       Finally, run Mindi again."
651            Die "Odd."
652        fi
653        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
654        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
655            LogAll "\nINFO: Incorporating Network-related settings"
656            for r in NETFS-* ; do
657                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
658                LogFile "INFO: Copying $r to ramdisk"
659            done
660        fi
661    fi
662    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
663    rm -f $tempfile $outfile.pre
664    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
665    return $res
666}
667
668
669GenerateListForFile() {
670    local files_found loc fname incoming i res
671    incoming="$1"
672    files_found=""
673    res=0
674
675    for fname in $incoming ; do
676        files_found="$files_found `LocateFile $fname`"
677    done
678
679    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
680}
681
682
683# Returns all disk devices which are part of a raid array
684GetAllRaidMembers() {
685    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
686}
687
688
689GetFileSizeList() {
690    local i
691    for i in `find $1 -type d -o -print` ; do
692        du -sk $i
693    done
694}
695
696
697# Check kernel filesystem capabilites for accessing initrd image
698# Could be ext2 FS (old mode) or initramfs (new mode)
699#
700# Interface definition:
701# param #1: absolute path to kernel image
702GetInitrdFilesystemToUse() {
703
704    # interface test: make sure we have one parameter
705    if [ $# -ne 1 ]; then
706        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
707    fi
708
709    # interface parameters
710    local lvKernelImage=$1
711
712    # local constants (filesystem magic strings)
713    local lcMagicCramfs="<3>cramfs: wrong magic"
714    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
715    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
716    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
717
718    # local variables
719    local lvOffset
720    local lvScanRes
721    local lvUseFilesystem
722
723    # say where we are.
724    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
725
726    # verify that file exists
727    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
728
729    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
730    file $lvKernelImage 2>&1 | grep -q gzip
731    if [ $? -eq 0 ]; then
732        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
733        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
734    else
735        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
736        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
737        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
738        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
739        if [ $lvOffset -eq 0 ]; then
740            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
741            lvScanRes=$lcMagicInitfs
742        else
743            lvOffset=`expr $lvOffset / 2`
744            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
745            # scan again  kernel image
746            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
747        fi
748    fi
749
750    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
751    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
752        lvUseFilesystem="ext2fs"
753    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
754        lvUseFilesystem="ext3fs"
755    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
756        lvUseFilesystem="initramfs"
757    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
758        lvUseFilesystem="cramfs"
759    else
760        # In that case, we are most probably after 2.6.30 and use the supported initramfs
761        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
762        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
763        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
764        lvUseFilesystem="initramfs"
765    fi
766
767    # say what we are using
768    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
769
770    # return file system to use
771    echo "$lvUseFilesystem"
772
773}
774
775# Searches members of raid device
776# $1: raid device (/dev/md...)
777GetRaidDevMembers() {
778    if [ ! -f /etc/raidtab ]; then 
779        return
780    fi
781    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
782}
783
784
785ListAllPartitions() {
786    local res currline partition all_partitions ap_orig remaining i j
787
788    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
789    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
790    if [ -e "/vmfs/volumes" ]; then
791        # For VMWare ESX 3 get the device names of these volumes
792        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
793    fi
794    return
795}
796
797
798ListImagesForUser() {
799    local path fname
800    path=$MINDI_CACHE
801    echo -en "In the directory '$path' you will find the images:-\n"
802    for fname in `ls $path | grep -F mindi-` ; do
803        printf "%19s " $fname
804    done
805    echo " "
806}
807
808
809ListKernelModulePaths() {
810    local module_list module fname r kern
811    module_list="$MODULES"
812    # Remove unwanted modules from list
813    for i in $DENY_MODS; do
814        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
815    done
816###
817### Sq-Modification ... Use kernelname for module search path if specified
818###
819    if [ "${kernelname}" != "" ]
820    then
821        kern=${kernelname}
822    else
823        kern="$KERVERRUN"
824    fi
825    export KERVER=$kern
826###
827### Sq-Mod End
828###
829    # Get rid of duplicates
830    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
831        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
832        if [ -z "$r" ]; then
833            if [ "`echo "$MODULES" | grep -w $module`" ]; then
834                r="[live module file not found]"
835            else
836                r="[extra module file not found]"
837            fi
838        else
839            [ -f "$r" ] && echo "$r"
840        fi
841        LogFile "INFO: module $module --> $r"
842    done
843    find /lib/modules/$kern/modules.* -type f 2> /dev/null
844}
845
846#
847# Critical function which computes all dependencies (dyn. lib.)
848# for a list of binaries
849#
850LocateDeps() {
851    local incoming fname deps
852    incoming="$*"
853    deps=""
854
855    for fname in $incoming ; do
856        if [ ! -e "$fname" ] ; then
857            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
858            if echo $fname | grep lvm &> /dev/null ; then
859                LogFile "          This warning only affects you if you are using LVM."
860                if echo "$MODULES" | grep lvm &> /dev/null ; then
861                    LogFile "          I think you are, so please take heed!"
862                else
863                    LogFile "          I don't think you are, so don't worry about it."
864                fi
865            fi
866        else
867            deps="$deps $fname" 
868        fi
869    done
870    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
871}
872
873
874LocateFile() {
875    local i j path fname_to_find location output resolved tmp stub cache_id loclist
876    fname_to_find="$1"
877    # It's an absolute path
878    j=`echo "$fname_to_find" | cut -c1`
879    if [ _"$j" = _"/" ]; then
880        dn=`dirname $fname_to_find`
881        # We suppose that the link is already included, just add the new file
882        if [ -h "$dn" ]; then
883            newdn=`readlink -f $dn`
884            bn=`basename $fname_to_find`
885            output="$newdn/$bn"
886        else
887            output="$fname_to_find"
888        fi
889        if [ -h "$output" ] ; then
890            output="`mr-read-all-link $output` $output"
891        fi
892        echo "$output"
893        return 0
894    fi
895    # It's not an absolute path
896    output=""
897    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
898    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
899        [ -h "$path" ] && continue
900        [ ! -e "$path/$fname_to_find" ] && continue
901        output="$path/$fname_to_find $output"
902        if [ -h "$path/$fname_to_find" ] ; then
903            output="`mr-read-all-link $path/$fname_to_find` $output"
904        fi
905    done
906    if [ "$output" = "" ] ; then
907        return 1
908    fi
909    echo "$output"
910    return 0
911}
912
913LogProgress() {
914    local i progress modres noof_lines title
915 
916    progress=$1
917    noof_lines=$2
918    title=$3
919
920    i=$(($progress*100))
921    if [ $noof_lines -ne 0 ]; then
922        i=$(($i/$noof_lines))
923    else
924        i=0
925    fi
926
927    if [ _"$MONDO_SHARE" != _"" ]; then 
928        echo "$title        $i%"
929    else
930        echo -en "\r\t\t\t\t\t\t\t\t"
931        echo -en "$i"
932        echo -en "%"
933        modres=$(($progress%4))
934        [ "$modres" -eq "0" ] && echo -en "\t/"
935        [ "$modres" -eq "1" ] && echo -en "\t-"
936        [ "$modres" -eq "2" ] && echo -en "\t\\"
937        [ "$modres" -eq "3" ] && echo -en "\t|"
938    fi
939}
940
941# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
942MakeMondoConfigFile() {
943    local outfile use_lzo use_comp use_star
944    outfile=$1
945    > $outfile
946    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
947    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
948    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
949    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
950    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
951    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
952    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
953    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
954    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
955    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
956    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
957    echo "use-lzo $use_lzo" >> $outfile
958    echo "use-gzip $use_gzip" >> $outfile
959    echo "use-star $use_star" >> $outfile
960    echo "use-lzma $use_lzma" >> $outfile
961    echo "use-comp $use_comp" >> $outfile
962    echo "datestamp `date`" >> $outfile
963    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
964    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
965    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
966    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
967    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
968    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
969    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
970    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
971    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
972    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
973    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
974    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
975    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
976    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
977
978    # Deal with network configuration in a portable way
979    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
980        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
981    fi
982}
983
984# Get PV's for an LV
985GetPVsForLV() {
986  if [ -n "$1" ]; then
987    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
988    if [ -z "$vg" ]; then
989      return
990    fi
991    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
992  fi
993}
994
995
996MakeMountlist() {
997    local mountlist all_partitions current_partition \
998partition_size partition_format outstring partition_number \
999partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1000absolute_partition old_partition_fmt current_lvolume uname skip
1001
1002    LogFile "------------------------------------"
1003    LogFile "Your raw fstab file looks like this:"
1004    LogFile "------------------------------------"
1005    cat $MY_FSTAB >> $LOGFILE
1006    LogAll "-----------------------------------"
1007    LogAll "Your mountlist will look like this:"
1008    LogAll "-----------------------------------"
1009
1010# mountlist(OUT)
1011    mountlist=$1
1012
1013# NB: partition = device
1014# NB: mountpt = where the device is mounted
1015
1016    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1017
1018    [ "$mountlist" != "" ] && rm -Rf $mountlist
1019    > $mountlist
1020    all_partitions=""
1021   
1022    if [ $LVM != "false" ]; then
1023        LogAll "INFO: Analyzing LVM..."
1024        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1025        if [ $? -ne 0 ]; then
1026            LVM="false"
1027        fi
1028        # Excluded LVs and GVs are not reported here
1029        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1030    fi
1031    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1032    for i in $IMAGE_DEVS ; do
1033        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1034    done
1035    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1036    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1037    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1038    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1039    for c_p in $all_partitions ; do
1040        # Skip fd/cd devices, network FS, cifs
1041        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1042        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1043        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1044            current_partition=`readlink -f $c_p`
1045            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1046                current_partition="$c_p"
1047            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1048                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1049                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1050            fi
1051            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1052        else
1053            current_partition="$c_p"
1054        fi
1055        [ "$c_p" = "none" ] && continue
1056        redhat_label=""
1057        label=""
1058        uuid=""
1059        absolute_partition=`readlink -f $c_p`
1060        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1061
1062        # set default in case we dont't find it
1063        str_to_find_fmt_with=$current_partition
1064
1065        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1066        # current_partition contains only first column of /etc/fstab
1067        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1068            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1069            actual_dev=""
1070
1071            # 1st try, findfs - the RHEL way of finding labels and their partitions
1072            if [ -x "/sbin/findfs" ]; then
1073                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1074            fi
1075   
1076            # 2nd try : blkid, the good way for all LABEL except swap
1077            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1078                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1079                # For LVM FS it will give a /dev/dm-# which should then be converted
1080                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1081                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1082                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1083                    for dev in `ls /dev/mapper/*`; do
1084                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1085                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1086                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1087                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1088                            break
1089                        fi
1090                    done
1091                fi
1092            fi
1093   
1094            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1095            # For LVM gives a /dev/mapper entry
1096            if [ "x$actual_dev" = "x" ]; then
1097                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1098            fi
1099   
1100            # 4th try, with vol_id
1101            # SWAP only
1102            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1103                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1104                for dev_swap in $list_swaps ; do
1105                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1106                    if [ "x$dev_exists" != "x" ]; then
1107                        actual_dev=$dev_swap
1108                        break;
1109                    fi
1110                done
1111            fi
1112
1113            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1114            # LABEL=SW-cciss/c0d0p3 (RDP)
1115            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1116            # SWAP only
1117            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1118                    skip=""
1119                    uname=$KERVERRUN
1120                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1121                    # 2.6.12 needs 16 (FC3)
1122                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1123                    # 2.6.19 and upper needs 1052
1124                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1125                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1126                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1127                    if [ $skip = "" ]; then
1128                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1129                    fi
1130                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1131                    do
1132                        # Location of the swap label for kernel 2.6
1133                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1134                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1135                            actual_dev=$try_dev
1136                        fi
1137                    done
1138            fi
1139
1140            # Check if one of all those tries has known success
1141            if [ "x$actual_dev" != "x" ]; then
1142                current_partition=$actual_dev
1143            else
1144                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1145            fi
1146        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1147        # current_partition contains only first column of /etc/fstab
1148        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1149            uuid=`echo "$current_partition" | cut -d'=' -f2`
1150            actual_dev=""
1151
1152            # 1st try, findfs - the RHEL way of finding labels and their partitions
1153            if [ -x "/sbin/findfs" ]; then
1154                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1155            fi
1156   
1157            # 2nd try : blkid, the good way for all UUID except swap
1158            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1159                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1160                # For LVM FS it will give a /dev/dm-# which should then be converted
1161                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1162                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1163                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1164                    for dev in `ls /dev/mapper/*`; do
1165                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1166                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1167                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1168                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1169                            break
1170                        fi
1171                    done
1172                fi
1173            fi
1174   
1175            # 3th try, with vol_id
1176            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1177                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1178                for dev in $list_dev ; do
1179                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1180                    if [ "x$dev_exists" != "x" ]; then
1181                        actual_dev=$dev
1182                        break;
1183                    fi
1184                done
1185            fi
1186
1187            # 4th try, with dumpuuid (VMWare only ?) for swap
1188            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1189                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1190                for dev in $list_dev ; do
1191                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1192                    if [ "x$dev_exists" != "x" ]; then
1193                        actual_dev=$dev
1194                        break;
1195                    fi
1196                done
1197            fi
1198
1199            # Check if one of all those tries has known success
1200            if [ "x$actual_dev" != "x" ]; then
1201                current_partition=$actual_dev
1202            else
1203                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1204            fi
1205        else
1206            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1207            # they use symlinks in fstab unrelated to what is shown in mount !
1208            if [ _"$partition_mountpt" = _"" ]; then
1209                # set default in case we dont't find it
1210                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1211                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1212                            str_to_find_fmt_with=$tmpp
1213                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1214                            break;
1215                        fi
1216                done
1217            fi
1218        fi
1219
1220        # Detects noauto partitions not mounted and exclude them
1221        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1222        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1223                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1224            continue
1225        fi
1226        # Detects bind partitions and exclude them
1227        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1228                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1229            continue
1230        fi
1231
1232        # Look for devices which have to be excluded
1233        skip=0
1234        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1235            l=""
1236            list_of_devices="`mr-read-all-link $current_partition`"
1237            for d in $list_of_devices; do
1238                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1239            done
1240
1241            # Remove PVs from LVs excluded
1242            l="$l `GetPVsForLV $current_partition`"
1243
1244            # We want a single unique list
1245            list_of_devices="`echo $l | sort -u`"
1246
1247            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1248                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1249                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1250                    skip=1
1251                    continue
1252                fi
1253            done
1254        fi
1255        if [ $skip -eq 1 ]; then
1256            continue
1257        fi
1258
1259        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1260        # Detects iso9660 ISO images and exclude them
1261        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1262                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1263            continue
1264        fi
1265        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1266        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1267        # the former is then a link to the latter, so we test whether
1268        # $current_partition is actually such a link or not and set
1269        # $current_lvolume accordingly. On Debian you may find more than one answer
1270        # so we remove the one corresponding to /dev/.static
1271        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1272        # principle is the same and we need to find the link to it as well.
1273        # Note that $current_lvolume may well be an
1274        # ordinary device. It is just to make sure that we feed the right value
1275        # into any of the LVM tools if possible.
1276
1277        current_lvolume="$current_partition"
1278        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1279            # .static dir are a Debian specificity
1280            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1281            echo $current_lvolume | grep -q ' '
1282            if [ $? -eq 0 ]; then
1283                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1284            fi
1285            # if it's not found, it may well be a real device such as a multipath one
1286            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1287            if [ _"$current_lvolume" = _"" ]; then
1288                current_lvolume="$current_partition"
1289            fi
1290        fi
1291        #
1292        # End of LVM device style variation code (other than $current_lvolume).
1293
1294        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1295            # Size computed via LVM not directly
1296            partition_size="lvm"
1297        else
1298            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1299            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1300            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1301                # Skip swap files
1302                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1303                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1304                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1305                [ "$partition_format" != "swap" ] && partition_format="swap"
1306                if [ "$partition_size" = "" ] ; then
1307                    totalsize=0
1308                    items=0
1309                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1310                        totalsize=$(($totalsize+$i))
1311                        items=$(($items+1))
1312                    done
1313                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1314                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1315                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1316                fi
1317            else
1318                partition_size=`SizeOfPartition $current_partition`
1319            fi
1320        fi
1321        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1322        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1323        if [ "$partition_mountpt" = "" ] ; then
1324            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1325                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1326                    partition_mountpt="raid"
1327                    partition_format="raid"
1328                else
1329                    partition_mountpt="lvm"
1330                    partition_format="lvm"
1331                fi
1332            fi
1333        fi
1334        psz=$partition_size
1335        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1336        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1337        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1338            partition_mountpt="image"
1339            old_partition_fmt=$partition_format
1340            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1341            partition_size=$(($partition_size+1)); # just in case
1342            if [ "$partition_format" = "Linux" ] ; then
1343                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1344                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1345                partition_format=$old_partition_fmt
1346            fi
1347        fi
1348
1349        if [ ! "$partition_mountpt" ] ; then
1350            LogFile "------- $FDISK -l $qq log ------------"
1351            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1352                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1353                [ "$partition_format" ] && break
1354            done
1355            LogFile "------- $FDISK log end ------------"
1356            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1357                partition_format="compaq"
1358            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1359                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1360                continue
1361            fi
1362        fi
1363        if [ "$redhat_label" ]; then
1364            label="$redhat_label"
1365        elif [ "$uuid" ]; then
1366            label="$uuid"
1367        fi
1368
1369        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1370        # in order to mount the root part e.g. in grub.
1371        # One way to solve this is to add the UUID now, if there wasn't one so it's
1372        # restored correctly
1373        if [ _"$label" = _"" ]; then
1374            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1375        fi
1376
1377        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1378        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1379        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1380        if [ "$current_partition" = "" ] ; then
1381            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1382        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1383            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1384                partition_mountpt=raid
1385                partition_format=raid
1386                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1387                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1388            else
1389                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1390            fi
1391        elif [ "$partition_format" = "" ] ; then
1392            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1393        elif [ "$partition_size" = "" ] ; then
1394            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1395        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1396            continue
1397        else
1398            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1399                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1400                partition_format="vfat"
1401            fi
1402            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1403            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1404        fi
1405    done
1406    LogAll "-----------------------------------" 
1407}
1408
1409CheckMountlist() {
1410    local file=$1
1411    # Coherency verification
1412    ML01=`cat $file | wc -l`
1413    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1414    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1415    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1416    if [ "$ML01" -ne "$ML1" ]; then
1417        LogFile "--------------------------------------------"
1418        LogAll "WARNING: Duplicate device entry in mountlist"
1419        LogFile "--------------------------------------------"
1420    fi
1421    if [ "$ML02" -ne "$ML2" ]; then
1422        LogFile "--------------------------------------------"
1423        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1424        LogFile "------------------------------------------------"
1425    fi
1426}
1427
1428OfferToMakeBootableISO() {
1429    local i old_pwd
1430    if [ -z "$ISO_CMD" ]; then
1431        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1432        return
1433    fi
1434    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1435        echo -en "Shall I make a bootable CD image? (y/[n]) "
1436        read i
1437        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1438    fi
1439    rm -Rf $MINDI_TMP/iso
1440    mkdir -p $MINDI_TMP/iso/{images,archives}
1441    LogFile "INFO: mindi_lib = $MINDI_LIB"
1442    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1443    for i in memdisk memtest.bin memtest.img ; do
1444        j=$MINDI_LIB/$i
1445        k=$MINDI_TMP/iso
1446        if [ -e "$j" ] ; then
1447            LogAll "INFO: Copying $j to $k"
1448            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1449            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1450            if [ _"$MONDO_SHARE" != _"" ]; then 
1451                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1452            fi
1453        fi
1454    done
1455    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1456    if [ $KERNEL_IS_XEN = "yes" ]; then
1457        FindMboot32Binary
1458        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1459        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1460    fi
1461    # Useful for syslinux 5.x
1462    FindLdlinux32Binary
1463    if [ -e $LDLINUXC32 ]; then
1464        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1465    fi
1466    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1467    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1468
1469    if [ _"$MONDO_SHARE" != _"" ]; then 
1470        if [ $KERNEL_IS_XEN = "yes" ]; then
1471            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1472            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1473        fi
1474        if [ -e $LDLINUXC32 ]; then
1475            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1476        fi
1477        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1478        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1479    fi
1480    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1481    if [ "$ARCH" != "ia64" ] ; then
1482        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1483    fi
1484    old_pwd=`pwd`
1485    cd "$MINDI_TMP/iso"
1486    if [ "$ARCH" != "ia64" ] ; then
1487        if [ _"$MONDO_SHARE" != _"" ]; then 
1488            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1489            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1490                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1491            fi
1492            if [ $KERNEL_IS_XEN = "yes" ]; then
1493                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1494            fi
1495            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1496        fi
1497        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1498    else
1499        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1500    fi
1501    if [ "$?" -ne "0" ] ; then
1502        LogFile "----------- $ISO_CMD's errors --------------"
1503        LogAll "$ISO_CMD returned the following errors:"
1504        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1505        LogAll "ERROR: Failed to create ISO image."
1506    else
1507        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1508    fi
1509    rm -f $MINDI_TMP/mkisofs.log
1510    cd "$old_pwd"
1511}
1512
1513
1514OfferToMakeBootableUSB() {
1515    local i
1516    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1517        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1518        read i
1519        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1520        if [ "$USBDEVICE" = "" ]; then
1521            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1522            read dev
1523            USBDEVICE=$dev
1524        fi
1525        echo "WARNING: This will erase all content on $USBDEVICE"
1526        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1527        read i
1528        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1529    fi
1530    rm -Rf $MINDI_TMP/usb
1531    mkdir -p $MINDI_TMP/usb
1532    USBPART="${USBDEVICE}1"
1533
1534    echo -en "Transforming $USBDEVICE in a Bootable device " 
1535    echo -en "."
1536    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1537    LogFile "INFO: Checking $USBDEVICE"
1538    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1539    if [ $? -ne 0 ]; then
1540        LogAll "ERROR: Unable to access $USBDEVICE"
1541        LogAll "       Make sure your USB device is plugged in"
1542        MindiExit -1
1543    fi
1544    echo -en "."
1545    # Some distro do auto mount at that point (Ubuntu)
1546    LogFile "INFO: Unmounting $USBPART just in case"
1547    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1548    # If your key has no MBR it may cause an issue
1549    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1550    if [ -r $MBRFILE ]; then
1551        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1552        dd if=$MBRFILE of=$USBDEVICE
1553    else
1554        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1555        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1556    fi
1557    LogFile "INFO: Preparing $USBDEVICE"
1558    cat > $MINDI_TMP/fdisk.txt << EOF
1559d
1560d
1561d
1562d
1563n
1564p
15651
1566
1567
1568t
1569b
1570a
15711
1572w
1573EOF
1574    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1575    if [ $? -ne 0 ]; then
1576        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1577        LogAll "       Make sure your USB device is plugged in"
1578        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1579        MindiExit -1
1580    fi
1581    LogFile "fdisk build file"
1582    LogFile "----------------"
1583    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1584    LogFile "----------------"
1585    rm -f $MINDI_TMP/fdisk.txt
1586    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1587    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1588    echo -en "."
1589    # Calling kpartx in case devices were not created
1590    if [ -x "/sbin/kpartx" ]; then
1591        /sbin/kpartx -a $USBDEVICE
1592    fi
1593    # Some distro do auto mount at that point (Ubuntu)
1594    LogFile "INFO: Unmounting $USBPART just in case again"
1595    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1596    echo -en "."
1597    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1598    if [ "`which dmsetup`" != "" ]; then
1599        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1600        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1601            LogFile "INFO: Removing $block_id from device mapper."
1602            sleep 1
1603            dmsetup remove $block_id
1604        fi
1605    fi
1606    echo -en "."
1607    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1608    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1609    if [ $? -ne 0 ]; then
1610        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1611        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1612        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1613        MindiExit -1
1614    fi
1615    echo -en "."
1616    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1617    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1618    if [ $? -ne 0 ]; then
1619        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1620        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1621        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1622        MindiExit -1
1623    fi
1624    echo -en "."
1625    mkdir -p $MINDI_TMP/usb/images
1626    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1627    echo -en "."
1628    LogFile "INFO: mindi_lib = $MINDI_LIB"
1629    for i in memdisk memtest.bin memtest.img ; do
1630        j=$MINDI_LIB/$i
1631        k=$MINDI_TMP/usb
1632        if [ -e "$j" ] ; then
1633            LogIt "INFO: Copying $j to $k"
1634            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1635            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1636        fi
1637    done
1638    echo -en "."
1639    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1640    echo -en "."
1641    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1642    echo -en "."
1643    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1644    echo -en "."
1645    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1646    echo -en "."
1647    LogAll "----------- syslinux's conf --------------"
1648    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1649    LogAll "------------------------------------------"
1650    umount $MINDI_TMP/usb
1651    if [ "$ARCH" != "ia64" ] ; then
1652        syslinux -v 2>&1 | grep -q 4.02
1653        if [ $? -eq 0 ]; then
1654            # This buggy version of syslinux requires a call to --stupid and not -s
1655            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1656            res=$?
1657        else
1658            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1659            res=$?
1660        fi
1661        if [ $res -ne 0 ] ; then
1662            LogAll "----------- syslinux's errors --------------"
1663            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1664            LogAll "------------------------------------------"
1665            LogIt "ERROR: Failed to create USB image."
1666        else
1667            echo -e "$DONE"
1668            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1669        fi
1670        rm -f $MINDI_TMP/syslinux.log
1671    else
1672        LogAll "ERROR: No USB boot support for ia64"
1673        MindiExit -1
1674    fi
1675}
1676
1677
1678MakeMessageFile() {
1679   
1680    if [ -x "/bin/lsb_release" ]; then
1681        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1682    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1683        DESC="Arch Linux"
1684        if [ -r /var/log/pacman.log ]; then
1685            # there are no releases but we can get the last system upgrade
1686            # Output example:   Arch Linux [2011-03-03 01:39]
1687            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1688        fi
1689    elif [ -r /etc/issue.net ]; then
1690        DESC=`head -1 /etc/issue.net`
1691    elif [ -r /etc/issue ]; then
1692        DESC=`head -1 /etc/issue`
1693    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1694        # For pb >= 0.9.8
1695        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1696    else
1697        DESC="Unknown desc"
1698    fi
1699    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1700    if [ _"$MONDO_SHARE" != _"" ]; then
1701        if [ "$CDRECOVERY" != "yes" ] ; then
1702            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1703                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1704                echo -en "$BOOT_MEDIA_MESSAGE"
1705            elif [ ! "$MINDI_TMP" ] ; then
1706                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1707                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1708                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1709                fi
1710            else
1711                echo -en "$BOOT_MEDIA_MESSAGE"
1712            fi
1713        else
1714            echo -en "\
1715To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1716CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1717        fi
1718    fi
1719
1720    # Also create the other help screens
1721    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1722    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1723    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1724}
1725
1726
1727MakeBootConfFile() {
1728    local options i ooo
1729    options=""
1730    # Type of boot file (elilo or syslinux/isolinux)
1731    type=$1
1732    if [ "$type" = "elilo" ]; then
1733        sep="="
1734    else
1735        sep=" "
1736    fi
1737
1738    # Generic header for conf file
1739    if [ "$type" != "elilo" ] ; then
1740        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1741    else
1742        echo -en "prompt\n"
1743    fi
1744
1745    # Compute which default option to boot from
1746    if [ "$CDRECOVERY" = "yes" ] ; then
1747        echo -en "default${sep}RESTORE\n"
1748    # In case it's mondoarchive
1749    elif [ _"$MONDO_SHARE" != _"" ]; then
1750        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1751            echo -en "default${sep}iso\n"
1752        else
1753            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1754        fi
1755    else
1756        echo -en "default${sep}expert\n"
1757    fi
1758
1759    # Handle timeout
1760    if [ "$CDRECOVERY" != "yes" ] ; then
1761        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1762    else
1763        echo -en "timeout${sep}10000\n"
1764    fi
1765    echo -en "\n"
1766
1767    # prepare which labels will be generated
1768    if [ "$CDRECOVERY" = "yes" ] ; then
1769        options="RESTORE expert"
1770    else
1771        if [ _"$MONDO_SHARE" != _"" ]; then
1772            options="interactive expert compare iso nuke isonuke"
1773        else
1774            options="expert"
1775        fi
1776    fi
1777
1778    # Generate rest of conf file
1779    for i in $options ; do
1780        ooo=$i
1781        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1782        if [ "$type" = "elilo" ]; then
1783            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1784        else
1785            ps="/"
1786            if [ "$type" = "syslinux" ]; then
1787                ps=""
1788            fi
1789            if [ $KERNEL_IS_XEN = "no" ]; then
1790                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1791            else
1792                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1793            fi
1794        fi
1795        echo -en "$outstr"
1796    done
1797    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1798        if [ "$type" = "elilo" ]; then
1799            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1800            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1801        else
1802            ps="/"
1803            if [ "$type" = "syslinux" ]; then
1804                ps=""
1805            fi
1806            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1807            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1808        fi
1809    fi
1810}
1811
1812
1813PrepareBootDiskImage_LILO() {
1814    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1815    imagesdir=$MINDI_CACHE
1816    kernelpath=$1
1817
1818    retval=0
1819
1820    old_pwd=`pwd`
1821    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1822    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1823    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1824    echo -en "..."
1825    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1826    mkdir -p $mountpoint
1827    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1828    LogFile "Creating vfat filesystem on $imagefile" 
1829    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1830    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1831
1832    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1833    mkdir -p $mountpoint/etc
1834    liloconf=$mountpoint/elilo.conf
1835
1836    MakeBootConfFile elilo > $liloconf
1837
1838    # Copy it so that CD-ROM menu entry is satisfied
1839    mountefi=0
1840    df -T | grep /boot/efi | grep -q vfat
1841    if [ $? -ne 0 ]; then
1842        mount /boot/efi
1843        if [ $? -ne 0 ]; then
1844            echo "You have to mount your EFI partition when using mindi"
1845            MindiExit -1
1846        fi
1847        mountefi=1
1848    fi
1849    el=`find /boot/efi -name elilo.efi`
1850    cp $el $mountpoint
1851    cp $liloconf $mountpoint
1852    if [ $mountefi -eq 1 ]; then
1853        umount /boot/efi 2>&1 > /dev/null
1854    fi
1855
1856    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1857    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1858    if [ "$?" -ne "0" ] ; then
1859        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1860        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1861        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1862        rm -f $MINDI_TMP/mtpt.$$
1863        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1864        retval=$(($retval+1))
1865    fi
1866    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1867
1868    mkdir -p $mountpoint/tmp
1869    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1870        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1871    fi
1872
1873    # copy the kernel across
1874    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1875    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1876    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1877    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1878    if [ "$?" -ne "0" ] ; then
1879        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1880        du -sk $mountpoint/* >> $LOGFILE
1881        LogFile "--- end of list of files ---"
1882        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1883        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1884        cd "$old_pwd"
1885        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1886        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1887    #   losetup /dev/loop0 -d
1888        [ "$imagefile" != "" ] && rm -f $imagefile
1889        LogIt "ERROR: Sorry, your kernel is too big for your image"
1890        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1891        return 0
1892    fi
1893    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1894    LogFile "INFO: Free space left on image = $free_space KB"
1895    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1896    # make it bootable
1897    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1898    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1899    if [ "$KERN_DISK_MADE" ] ; then
1900        LogFile "INFO: Not running LILO. It's not that kind of disk."
1901    fi
1902
1903    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1904    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1905    echo -en "..."
1906    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1907    if [ "$retval" -eq "0" ] ; then
1908        echo -en "...$DONE\n"
1909        if [ "$KERN_DISK_MADE" ] ; then
1910            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1911        fi
1912    else
1913        echo -en "...failed\n"
1914        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1915        [ "$imagefile" != "" ] && rm -f $imagefile
1916    fi
1917    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1918    return $retval
1919}
1920
1921
1922PrepareBootDiskImage_ISOLINUX() {
1923    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1924    imagesdir=$MINDI_CACHE
1925    kernelpath=$1
1926    do_boot_root_thingy=""
1927    retval=0
1928
1929    old_pwd=`pwd`
1930    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1931    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1932    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1933    echo -en "..."
1934    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1935    mkdir -p $mountpoint
1936    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1937    LogFile "INFO: Creating vfat filesystem on $imagefile"
1938    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1939    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1940    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1941
1942    # Only move it now to its final destination and use it now
1943    mv $imagefile $imagesdir
1944    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1945
1946    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1947
1948    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1949    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1950    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1951    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1952    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1953    if [ "$?" -ne "0" ] ; then
1954        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1955        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1956        LogAll "       Please unload some of your modules and try again."
1957        rm -f $MINDI_TMP/mtpt.$$
1958        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1959        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1960        retval=$(($retval+1))
1961    fi
1962
1963    mkdir -p $mountpoint/tmp
1964    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1965        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1966    fi
1967
1968    # copy the kernel across
1969    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1970    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1971    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1972         
1973    retval=0
1974    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1975    retval=$?
1976    if [ $KERNEL_IS_XEN = "yes" ]; then
1977        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1978        let retval+=$?
1979    fi
1980 
1981    if [ "$retval" -ne "0" ] ; then
1982        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1983        du -sk $mountpoint/* >> $LOGFILE
1984        LogFile "--- end of list of files ---"
1985        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1986        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1987        cd "$old_pwd"
1988        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1989        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1990
1991        LogIt "ERROR: Sorry, your kernel is too big for your image"
1992        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1993    fi
1994    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1995    LogFile "INFO: Free space left on image = $free_space KB"
1996    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1997
1998    # make it bootable
1999    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2000    mkdir -p $mountpoint/etc
2001    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2002    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2003    echo -en "..."
2004    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2005
2006    if [ "$retval" -eq "0" ] ; then
2007        echo -en "...$DONE\n"
2008        if [ "$KERN_DISK_MADE" ] ; then
2009            [ "$imagefile" != "" ] && rm -f $imagefile
2010            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2011        fi
2012    else
2013        echo -en "...failed\n"
2014        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2015        [ "$imagefile" != "" ] && rm -f $imagefile
2016    fi
2017    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2018    return $retval
2019}
2020
2021
2022ParseModprobeForIncludes() {
2023local MODPROBE_CONF mpincfile includes include
2024
2025MODPROBE_CONF=/etc/modprobe.conf
2026mpincfile=$1
2027touch $mpincfile
2028if [ -a $MODPROBE_CONF ]; then
2029    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2030    if [ -n "$includes" ]; then
2031        for include in $includes
2032        do
2033            if [ -a "$include" ]; then
2034                echo $include >> $mpincfile
2035            fi
2036        done
2037    fi
2038fi
2039}
2040
2041
2042PrepareDataDiskImages() {
2043    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2044
2045    imagesdir=$MINDI_CACHE
2046    rm -f $imagesdir/mindi.iso
2047    needlist=$MINDI_TMP/what-we-need.txt
2048    bigdir=$MINDI_TMP/bigdir
2049    mkdir -p $bigdir/usr/bin
2050    mkdir -p $bigdir/usr/sbin
2051    includefile=$MINDI_TMP/$$.includefile.txt
2052
2053    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2054    if [ -e "$DEPLIST_FILE" ]; then
2055        lfiles="$DEPLIST_FILE $lfiles"
2056    fi
2057    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2058    ParseModprobeForIncludes $includefile
2059    lines=$(($lines+`cat $includefile | wc -l`))
2060    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2061    res=$?
2062    rm -f $includefile
2063    ListKernelModulePaths >> $needlist
2064    if [ "$res" -ne "0" ] ; then
2065        Die "You have $res files present in dependency list\nbut absent from filesystem."
2066    fi
2067    mkdir -p $bigdir/tmp
2068    if [ _"$MONDO_SHARE" != _"" ]; then
2069        # BCO: no reason to have the cfg file stored twice
2070        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2071        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2072    fi
2073
2074    # Needs to be done after the MRCFG creation
2075    FindAndAddUserKeyboardMappingFile
2076
2077    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2078    DropOptimizedLibraries $needlist $bigdir
2079    echo -en "Assembling dependency files"
2080
2081    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2082
2083    # also copy io.sys and msdos.sys, if we can find them
2084    for i in `mount | cut -d' ' -f3` ; do
2085        for j in io.sys msdos.sys ; do
2086            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2087        done
2088    done
2089
2090    # master boot record, too
2091    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2092    if [ "$i" ] ; then
2093        LogAll "INFO: Backing up $i's MBR"
2094        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2095        sleep 1
2096        sync
2097        j=$i
2098        [ -h "$j" ] && j=`readlink -f $j`
2099        LogAll "INFO: Creating /dev/boot_device ($j)"
2100        mkdir -p $bigdir/dev
2101        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2102    fi
2103
2104    old_pwd=`pwd`
2105    cd "$bigdir"
2106
2107    # Get terminfo content
2108    ti="usr/share/terminfo/l"
2109    if [ -d /$ti ]; then
2110        mkdir -p $ti
2111        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2112    fi
2113    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2114        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2115        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2116    fi
2117    if [ -d "/lib/dev-state" ]; then 
2118        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2119    fi
2120    cd "$old_pwd"
2121    echo -e "$DONE"
2122    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2123    MakeMountlist $MINDI_TMP/mountlist.txt
2124    CheckMountlist $MINDI_TMP/mountlist.txt
2125    mkdir -p $bigdir/tmp
2126    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2127    if [ _"$MONDO_SHARE" != _"" ]; then
2128        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2129    fi
2130    if [ $LVM != "false" ]; then
2131        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2132        if [ "$?" -ne "0" ]; then
2133            LVM="false"
2134            rm -f $bigdir/tmp/i-want-my-lvm
2135        else
2136            LogFile "Your i-want-my-lvm file content is:"
2137            LogFile "-----------------------------------"
2138            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2139            LogFile "-----------------------------------"
2140        fi
2141    fi
2142    LogFile "Your mountlist.txt file content is:"
2143    LogFile "-----------------------------------"
2144    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2145    LogFile "-----------------------------------"
2146
2147    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2148    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2149    if [ _"$MONDO_SHARE" != _"" ]; then
2150        for q in filelist.full.gz biggielist.txt ; do
2151            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2152            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2153        done
2154    fi
2155
2156    echo -en "Tarring and zipping the data content..."
2157    size_of_all_tools=`du -sk $bigdir | cut -f1`
2158    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2159    LogFile "Size of the data content"
2160    LogFile "------------------------"
2161    du -sk $imagesdir/*gz >> $LOGFILE
2162    LogFile "------------------------"
2163    echo -e "$DONE"
2164
2165    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2166    rm -rf $bigdir
2167    rm -f $needlist
2168}
2169
2170
2171Prompt() {
2172    echo -en "$1"
2173    read line
2174}
2175
2176
2177ReadLine() {
2178    local i incoming
2179    read incoming
2180    i=0
2181    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2182        i=$(($i+1))
2183        read incoming
2184    done
2185    echo "$incoming"
2186}
2187
2188
2189SizeOfPartition() {
2190    local devpath drive res stub
2191    device=$1
2192    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2193        Die "Cannot find $device's size - is your /etc/fstab sane?"
2194    fi
2195    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2196        res=`SizeOfRaidPartition $device`
2197        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2198        echo "$res"
2199        return 0
2200    fi
2201    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2202    res=`$FDISK -s $device 2>> $LOGFILE`
2203    # end patch
2204    # take only the first in case of multiple mount (cifs, nfs, ...)
2205    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2206    [ "$res" = "" ] && res="-1"
2207    echo $res
2208    return 0
2209}
2210
2211
2212SizeOfRaidPartition() {
2213    local real_dev smallest_size silly tmp
2214
2215    silly=999999999
2216    smallest_size=$silly
2217
2218    for real_dev in `GetRaidDevMembers $1` ; do
2219        tmp=`SizeOfPartition $real_dev`
2220        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2221    done
2222
2223    if [ "$smallest_size" = "$silly" ] ; then
2224        echo "-1"
2225        return 1
2226    else
2227        echo "$smallest_size"
2228        return 0
2229    fi
2230}
2231
2232
2233StripExecutable()
2234{
2235    local tmpfile
2236
2237    tmpfile=$MINDI_TMP/stripped.$$.dat
2238    [ -d "$1" ] || [ -h "$1" ] && return
2239    cp -f $1 $tmpfile 2>> $LOGFILE
2240    strip $tmpfile 2> /dev/null
2241    if [ "$?" -eq "0" ] ; then
2242        cp -f $tmpfile $1 2>> $LOGFILE
2243        LogFile "INFO: Stripped binary $2"
2244    fi
2245    rm -f $tmpfile
2246}
2247
2248KernelVer() {
2249        local fkern_ver fname
2250
2251        fname=$1
2252        file $fname | grep -q gzip
2253        if [ "$?" -eq "0" ] ; then
2254            # Used by ia64
2255            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2256        else
2257            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2258        fi
2259        echo "$fkern_ver"
2260}
2261
2262
2263# WARNING: This function should just echo the final result !!!
2264#
2265TryToFindKernelPath() {
2266    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2267
2268    we_want_version=$KERVERRUN
2269    possible_kernels=""
2270    duff_kernels=""
2271    output=""
2272   
2273    if [ "$ARCH" = "ia64" ] ; then
2274       root="/boot/efi/efi"
2275    else
2276       root="/"
2277    fi
2278    # See if we're booted from a Xen kernel
2279    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2280    if [ -f /proc/xen/capabilities ]; then
2281        # It's a Xen kernel
2282        KERNEL_IS_XEN="yes"
2283        LogFile "INFO: It's a Xen kernel..."
2284    fi
2285
2286    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2287        [ ! -e "$fname" ] && continue
2288        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2289        fkern_ver=`KernelVer $fname`
2290        [ "$fkern_ver" = "" ] && continue
2291        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2292        [ -f "$fname" ] || continue
2293        [ -h "$fname" ] && continue
2294        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2295        file $fname | grep -q gzip
2296        if [ "$?" -eq "0" ] ; then
2297            # Used by ia64
2298            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2299                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2300                duff_kernels="$fname $duff_kernels"
2301            else
2302                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2303                possible_kernels="$fname $possible_kernels"
2304            fi
2305        else
2306            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2307                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2308                duff_kernels="$fname $duff_kernels"
2309            else
2310                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2311                possible_kernels="$fname $possible_kernels"
2312            fi
2313        fi
2314    done
2315    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2316        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2317    fi
2318    if [ ! "$possible_kernels" ] ; then
2319        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2320        possible_kernels="$duff_kernels"
2321        if [ ! "$possible_kernels" ] ; then
2322            LogAll "INFO: Sorry, no duff kernels either"
2323        else
2324            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2325            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2326        fi
2327    fi
2328    if [ $KERNEL_IS_XEN = "yes" ]; then
2329        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2330        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2331    fi
2332    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2333    noof_kernels=`CountItemsIn "$possible_kernels"`
2334    if [ "$noof_kernels" -eq "0" ] ; then
2335        LogAll "Could not find your kernel."
2336        if [ -e "/boot/vmlinuz" ] ; then
2337            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2338            output=/boot/vmlinuz
2339        else
2340            output=""
2341        fi
2342    elif [ "$noof_kernels" -eq "1" ] ; then
2343        kp=`echo "$possible_kernels" | sed s/' '//`
2344        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2345        output="$kp"
2346    else
2347        for i in $possible_kernels ; do
2348            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2349                LogAll "INFO: OK, I used my initiative and found that "
2350                LogAll "INFO: $i is probably your kernel. "
2351                output="$i"
2352                break
2353            fi
2354        done
2355        if [ ! -n "$output" ]; then
2356            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2357                output=/boot/vmlinuz
2358                LogFile "INFO: Schlomo, this one's for you."
2359            else
2360                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2361                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2362                LogFile "INFO: $possible_kernels"
2363                output=""
2364            fi
2365        fi
2366    fi
2367    if [ $KERNEL_IS_XEN = "yes" ]; then
2368        if [ "$noof_xenkernels" -eq "0" ]; then
2369            xenkernelpath=""
2370        elif [ "$noof_xenkernels" -eq "1" ]; then
2371            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2372            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2373        else
2374            for i in $possible_xenkernels ; do
2375                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2376                    LogFile "INFO: OK, I used my initiative and found that "
2377                    LogFile "INFO: $i is probably your Xen kernel. "
2378                    xenkernelpath="$i"
2379                    break
2380                fi
2381            done
2382            if [ ! -n "$xenkernelpath" ]; then
2383                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2384                if [ ! -n "$new_possible_xenkernels" ]; then
2385                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2386                    LogFile "INFO: Using $xenkernelpath"
2387                else
2388                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2389                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2390                    LogFile "INFO: $possible_xenkernels"
2391                    output=""
2392                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2393                    LogFile "INFO: Using $xenkernelpath"
2394                fi
2395            fi
2396        fi
2397        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2398            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2399        fi
2400    fi
2401    LogAll "TryToFindKernelPath found $output"
2402    echo "$output"
2403}
2404
2405
2406TurnTgzIntoRdz() {
2407    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2408
2409    tgz_dir_fname=$1
2410    rdz_fname=$2
2411    kernelsize=$3
2412    maxsize=$(($BOOT_SIZE-$kernelsize))
2413    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2414    tempfile=$MINDI_TMP/temp.rd
2415    res=0
2416    echo -en "..."
2417    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2418    echo -en "..."
2419    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2420    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2421    echo -en "..."
2422    mkdir -p $mountpoint
2423    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2424    echo -en "..."
2425    old_pwd=`pwd`
2426    cd "$mountpoint"
2427
2428    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2429    for d in bin sbin lib lib64; do
2430        if [ -h "/$d" ]; then
2431            thelink=`readlink /$d`
2432            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2433            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2434            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2435                rmdir $mountpoint/$d
2436            fi
2437            if [ ! -h $mountpoint/$d ]; then
2438                rm -f $mountpoint/$d 2> /dev/null
2439                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2440            fi
2441        fi
2442    done
2443    LogFile "INFO: what is now in $mountpoint"
2444    ls -alR $mountpoint >> $LOGFILE
2445   
2446    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2447    for f in $tgz_dir_fname/*; do 
2448        if [ ! -r $f ]; then
2449            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2450        else
2451            cp -Rdf $f . 2>&1 >> $LOGFILE
2452        fi
2453    done
2454    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2455    ln -sf usr/sbin/init linuxrc
2456
2457    cd dev || Die "Can't cd to dev"
2458    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2459    rm -f dev-entries.tgz
2460    cd ..
2461
2462    for w in insmod.static insmod.static.old ; do
2463        s=`which $w 2> /dev/null`
2464        if [ -e "$s" ] ; then
2465            tar cf - -C / $s 2> /dev/null | tar xf -
2466        fi
2467    done
2468
2469    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2470   
2471    # Copy of files mandatory for ssh to automate mount if sshfs is used
2472    mkdir $mountpoint/.ssh $mountpoint/tmp
2473    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2474    cat > $mountpoint/tmp/myssh << EOF
2475ssh -o StrictHostKeyChecking=no $*
2476EOF
2477    chmod 755 $mountpoint/tmp/myssh
2478
2479    # Copy of files mandatory for ld.so
2480    cp -a /etc/ld.so.c* $mountpoint/etc
2481
2482    # Handle the case where busybox and mount are dynamically linked
2483    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2484    if [ $? -eq 0 ]; then
2485        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2486        rm -f bin/mount
2487    fi
2488
2489    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2490    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2491    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2492        if [ -d $f ]; then
2493            for g in `find $f`; do 
2494                echo $g >> $MINDI_TMP/minimal.lis
2495                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2496            done
2497        else 
2498            if [ -r $f ]; then
2499                echo $f >> $MINDI_TMP/minimal.lis
2500                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2501            fi
2502        fi
2503    done
2504    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2505        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2506    done
2507    # Initial / are trucated by tar
2508    finallist=""
2509    # Remove directories from the list, as tar/cp will create them anyway
2510    # and it may hurt if /lib is in it as on Debian/Ubuntu
2511    # recent bash says that -d is true for a link to a dir !
2512    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2513        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2514            finallist="$finallist $f"
2515        fi
2516    done
2517    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2518    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2519    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2520
2521    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2522    ln -sf /bin/bash bin/sh
2523    LogIt "INFO: Using bash as default shell"
2524    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2525
2526    # Avoids an issue on some distro (RHEL5)
2527    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2528
2529    mkdir -p $mountpoint/tmp
2530    # Management of udev (which includes modprobe in rules)
2531    ps auxww | grep -v grep | grep -qw udevd
2532    if [ $? -eq 0 ]; then
2533        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2534        LogIt "INFO: udev device manager found"
2535        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2536        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2537        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2538        # Do not do it if it's a link (Ubuntu 64 bits #503)
2539        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2540            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2541        fi
2542        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2543            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2544        fi
2545        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2546            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2547        fi
2548        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2549            tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2550        fi
2551        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2552            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2553            lis=""
2554            # Get only the files which exist in that list
2555            # and potentially their symlink structure
2556            for i in $lis2; do
2557                if [ -h $i ]; then
2558                    j=$i
2559                    while [ -h $j ]; do
2560                        lis="$lis $j"
2561                        j=`readlink -f $j`
2562                    done
2563                    lis="$lis $j"
2564                elif [ -f $i ]; then
2565                    lis="$lis $i"
2566                fi
2567            done
2568            # And their deps
2569            LocateDeps $lis > $MINDI_TMP/udev.lis
2570            for i in $lis; do
2571                if [ "`echo $i | cut -c1`" = "/" ]; then
2572                    j=`echo $i | cut -c2-`
2573                    [ "$j" != "" ] && rm -f $j
2574                fi
2575                echo "$i" >> $MINDI_TMP/udev.lis
2576            done
2577            finallist=""
2578            # Remove directories from the list, as tar/cp will create them anyway
2579            # and it may hurt if /lib is in it as on Debian/Ubuntu
2580            # recent bash says that -d is true for a link to a dir !
2581            for f in `sort -u $MINDI_TMP/udev.lis`; do
2582                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2583                    finallist="$finallist $f"
2584                fi
2585            done
2586            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2587            echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2588            cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2589            rm -f $MINDI_TMP/udev.lis
2590        else
2591            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2592            LogAll "         mindi will use static devices which may cause problems"
2593            rm -f $mountpoint/tmp/USE-UDEV
2594        fi
2595    fi
2596
2597    # Management of potential HW info (ProLiant only at the moment)
2598    rm -rf $MINDI_CACHE/bkphw
2599    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2600    if [ -d $MINDI_CACHE/bkphw ]; then
2601        LogIt "INFO: Hardware Information found and saved ..."
2602        cp -rp $MINDI_CACHE/bkphw .
2603        if [ -f $MINDI_CACHE/tools.files ]; then
2604            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2605            LocateDeps $lis > $MINDI_TMP/tools.lis
2606            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2607        fi
2608        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2609            mv -f $MINDI_CACHE/mindi-rsthw .
2610            chmod 755 ./mindi-rsthw
2611        fi
2612        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2613    fi
2614
2615    # Management of perl scripts delivered needed at restore time
2616    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2617    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2618
2619    for w in cdrom groovy-stuff ; do
2620        mkdir -p mnt/$w
2621    done
2622
2623    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2624
2625    echo -en "..."
2626    cd /
2627
2628    needed_modules=""
2629    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2630
2631    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2632        # For PXE boot
2633        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2634    fi
2635    for i in $DENY_MODS; do
2636        LogFile "INFO: Removing $i from the list of modules to load"
2637        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2638    done
2639
2640    if [ "${kernelname}" != "" ]; then
2641        needed_modules_path=lib/modules/${kernelname}
2642        mkgmopt="-k ${kernelname}"
2643    else
2644        needed_modules_path=lib/modules/$KERVERRUN
2645        mkgmopt="-k $KERVERRUN"
2646    fi
2647
2648    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2649    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2650
2651    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2652    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2653
2654    # Uncompress modules if not using udev and native modprobe
2655    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2656        for i in $needed_modules; do
2657            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2658                gunzip -f $mountpoint/$i
2659            fi
2660            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2661                bunzip2 -f $mountpoint/$i
2662            fi
2663            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2664                unxz -f $mountpoint/$i
2665            fi
2666            LogFile "INFO: Uncompressing $i"
2667        done
2668    fi
2669
2670    # Also copy modules.* in case of udev so that normal modprobe works
2671    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2672
2673    # Copy FW in case some drivers needs it
2674    for d in "/lib" "/usr/lib"; do
2675        if [ -d "$d/firmware" -a ! -h $d ]; then
2676            cp -a "$d/firmware" "$mountpoint/$d"
2677        fi
2678    done
2679
2680    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2681    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2682        if [ -d "$d/multipath" -a ! -h $d ]; then
2683            cp -a "$d/multipath" "$mountpoint/$d"
2684        fi
2685    done
2686
2687    # Ensure that with mindi-busybox 1.21, the links also exists under /bin for older distro which need it for their scripts
2688    (cd $mountpoint/usr/bin ; for i in `ls`; do if [ ! -e $mountpoint/bin/$i ]; then (cd $mountpoint/bin ; ln -sf ../usr/bin/$i .); fi; done)
2689
2690    # Copy an additional ProLiant tool for OBDR support
2691    if [ -f $MINDI_TMP/OBDR ]; then
2692        found=0
2693        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2694            mkdir -p $mountpoint/usr/bin
2695            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2696            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2697            found=1
2698        fi
2699        if [ -x /usr/bin/sg_wr_mode ]; then
2700            mkdir -p $mountpoint/usr/bin
2701            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2702            LocateDeps $lis > $MINDI_TMP/obdr.lis
2703            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2704            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2705            found=1
2706        fi
2707        if [ $found -eq 0 ]; then
2708            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2709            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2710        fi
2711    fi
2712
2713    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2714        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2715        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2716        rm -f $mountpoint/sbin/devfsd
2717    fi
2718    cd "$old_pwd"
2719    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2720    if [ _"$MONDO_SHARE" != _"" ]; then
2721        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2722        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2723        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2724        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2725        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2726    fi
2727
2728    # Create module list to load at restore time
2729    rm -f $mountpoint/tmp/modules
2730    for m in $CDROM_MODS; do
2731        echo $m >> $mountpoint/tmp/modules
2732    done
2733
2734    mkdir -p $mountpoint/proc
2735    LogFile "---------------------------"
2736    LogFile "Content of initial ramdisk:"
2737    LogFile "---------------------------"
2738    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2739    LogFile "---------------------------"
2740
2741    # Determine what filesystem to use for initrd image
2742    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2743    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2744    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2745    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2746        # say what will be used
2747        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2748        # kernel expects linuxrc in ext2 filesystem
2749        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2750        # unmount loop filesystem and create image file using the standard approach
2751        umount $mountpoint || Die "Cannot unmount $tempfile"
2752        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2753        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2754            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2755        else
2756            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2757        fi
2758        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2759        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2760        rm -f ${rdz_fname}.tmp
2761        # log that we are done
2762        LogFile "      ...done."
2763    elif [ "$gvFileSystem" = "initramfs" ]; then
2764        # say what will be used
2765        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2766        # make sure that cpio is there
2767        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2768        # go into filesystem
2769        cd "$mountpoint"
2770        # kernel expects init in cpio filesystem
2771        ln -sf usr/sbin/init init
2772        # create cpio image file and unmount loop filesystem
2773        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2774        cd "$old_pwd"
2775        umount $mountpoint || Die "Cannot unmount $tempfile"
2776        # log that we are done
2777        LogFile "      ...done."
2778    else
2779        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2780    fi
2781
2782    if [ "$res" -eq "0" ] ; then
2783        echo -en "..."
2784    else
2785        echo -en "\rMade an rdz WITH ERRORS.           \n"
2786    fi
2787    return 0
2788}
2789
2790
2791##############################################################################
2792#----------------------------------- Main -----------------------------------#
2793##############################################################################
2794
2795# Now we can create what we need
2796mkdir -p $MINDI_TMP
2797
2798# Purge from potential old run
2799if [ _"$MINDI_CACHE" = _"" ]; then
2800    Die "MINDI_CACHE undefined"
2801fi
2802
2803# --nolog needs to be first, and is used in analyze-my-lvm
2804if [ "$1" = "--nolog" ] ; then
2805    shift
2806    LOGFILE=/dev/stderr
2807else
2808    > $LOGFILE
2809fi
2810if [ "$1" = "--printvar" ] ; then
2811    shift
2812    if [ _"$1" != _"" ] ; then
2813        set | grep -Ew "^$1" | cut -d= -f2
2814    fi
2815    exit 0
2816fi
2817
2818LogFile "mindi v$MINDI_VERSION"
2819LogFile "$ARCH architecture detected"
2820LogFile "mindi called with the following arguments:"
2821echo "$@">> $LOGFILE
2822LogFile "Start date : `date`"
2823LogFile "-----------------------------"
2824
2825[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2826
2827# Log some capital variables
2828[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2829[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2830LogFile "MONDO_SHARE = $MONDO_SHARE"
2831LogFile "MINDI_LIB = $MINDI_LIB"
2832LogFile "MINDI_SBIN = $MINDI_SBIN"
2833LogFile "MINDI_CONF = $MINDI_CONF"
2834if [ -f $MINDI_CONFIG ]; then
2835    LogFile "-----------------------------"
2836    LogFile " Mindi configuration file    "
2837    LogFile "-----------------------------"
2838    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2839    LogFile "-----------------------------"
2840fi
2841LogFile "In Mindi"
2842LogFile "--------"
2843LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2844LogFile "BOOT_SIZE = $BOOT_SIZE"
2845LogFile "--------"
2846
2847trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2848
2849# Sanity checks
2850which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2851which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2852which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2853which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2854if which awk &> /dev/null ; then
2855    if ! which gawk &> /dev/null ; then
2856        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2857    fi
2858fi
2859which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2860[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2861
2862[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2863
2864# Update the PATH variable if incomplete
2865if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2866    PATH=$PATH:/sbin:/usr/sbin
2867    export PATH
2868    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2869    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2870    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2871fi
2872
2873if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2874    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2875fi
2876
2877### TODO
2878### Fix as it's not mandatory on ia64
2879if [ "$ARCH" = "ia64" ] ; then
2880    if which elilo &> /dev/null ; then
2881        LILO_EXE=elilo
2882    else
2883        LILO_EXE=`which false 2> /dev/null`
2884    fi
2885else
2886    FindIsolinuxBinary
2887fi
2888trap "Aborted" SIGTERM
2889DONE="\r\t\t\t\t\t\t\t\tDone.         "
2890kernelpath=""
2891MONDO_ROOT=/var/cache/mondo
2892mkdir -p $MONDO_ROOT
2893
2894if [ -d "/proc/lvm" ]; then
2895    # LVM v1
2896    LVMCMD=""
2897    LVM="v1"
2898elif [ -d "/dev/mapper" ]; then
2899    # LVM v2
2900    LVMCMD="lvm"
2901    LVM="v2"
2902else
2903    LVM="false"
2904fi
2905
2906if [ -e "/proc/cmdline" ]; then
2907    CMDLINE="/proc/cmdline"
2908elif [ -e "/tmp/cmdline" ]; then
2909    CMDLINE="/tmp/cmdline"
2910else
2911    CMDLINE="/dev/null"
2912fi
2913
2914LogFile "INFO: LVM set to $LVM"
2915LogFile "----------"
2916LogFile "mount result:"
2917LogFile "-------------"
2918mount >> $LOGFILE
2919if [ -e /etc/raidtab ]; then
2920    LogFile "-------------"
2921    LogFile "/etc/raidtab content:"
2922    LogFile "-------------"
2923    cat /etc/raidtab >> $LOGFILE
2924else
2925    LogFile "No file /etc/raidtab"
2926fi
2927if [ -e /etc/mdadm.conf ]; then
2928    LogFile "-------------"
2929    LogFile "/etc/mdadm.conf content:"
2930    LogFile "-------------"
2931    cat /etc/mdadm.conf >> $LOGFILE
2932else
2933    LogFile "-------------"
2934    LogFile "No file /etc/mdadm.conf"
2935fi
2936LogFile "-------------"
2937LogFile "cat $CMDLINE"
2938LogFile "-------------"
2939cat $CMDLINE >> $LOGFILE
2940LogFile "-------------"
2941LogFile "cat /proc/swaps:"
2942LogFile "-------------"
2943cat /proc/swaps >> $LOGFILE
2944LogFile "-------------"
2945if [ -e /proc/mdstat ]; then
2946    LogFile "cat /proc/mdstat:"
2947    LogFile "-------------"
2948    cat /proc/mdstat >> $LOGFILE
2949else
2950    LogFile "No pseudo file /proc/mdstat"
2951fi
2952LogFile "-------------"
2953LogFile "cat /proc/partitions:"
2954LogFile "-------------"
2955cat /proc/partitions >> $LOGFILE
2956LogFile "-------------"
2957LogFile "cat /proc/filesystems:"
2958LogFile "-------------"
2959cat /proc/filesystems >> $LOGFILE
2960LogFile "-------------"
2961LogFile "lsmod result:"
2962LogFile "-------------"
2963lsmod >> $LOGFILE
2964MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2965if [ -x /usr/sbin/esxcfg-module ]; then
2966    LogFile "-------------"
2967    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2968    LogFile "-------------"
2969    LogFile "VMWare modules"
2970    LogFile "-------------"
2971    /usr/sbin/esxcfg-module -l >> $LOGFILE
2972    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2973fi
2974LogFile "-------------" 
2975LogFile "FORCE_MODS:"
2976LogFile "-------------"
2977LogFile "$FORCE_MODS"
2978LogFile "-------------"
2979LogFile "DENY_MODS:"
2980LogFile "-------------"
2981LogFile "$DENY_MODS"
2982LogFile "-------------"
2983LogFile "df result:"
2984LogFile "----------"
2985df -aT >> $LOGFILE
2986LogFile "-------------"
2987LogFile "df -i result:"
2988LogFile "----------"
2989df -i >> $LOGFILE
2990LogFile "-------------"
2991if [ -r /boot/grub/menu.lst ]; then
2992    LogFile "-------------"
2993    LogFile "INFO: /boot/grub/menu.lst content"
2994    LogFile "-------------"
2995    cat /boot/grub/menu.lst >> $LOGFILE
2996    LogFile "-------------"
2997fi
2998if [ -r /boot/grub/grub.conf ]; then
2999    LogFile "-------------"
3000    LogFile "INFO: /boot/grub/grub.conf content"
3001    LogFile "-------------"
3002    cat /boot/grub/grub.conf >> $LOGFILE
3003    LogFile "-------------"
3004fi
3005if [ -r /boot/grub/grub.cfg ]; then
3006    LogFile "-------------"
3007    LogFile "INFO: /boot/grub/grub.cfg content"
3008    LogFile "-------------"
3009    cat /boot/grub/grub.cfg >> $LOGFILE
3010    LogFile "-------------"
3011fi
3012if [ -r /boot/grub/device.map ]; then
3013    LogFile "-------------"
3014    LogFile "INFO: /boot/grub/device.map content"
3015    LogFile "-------------"
3016    cat /boot/grub/device.map >> $LOGFILE
3017    LogFile "-------------"
3018fi
3019if [ -r /etc/lilo.conf ]; then
3020    LogFile "-------------"
3021    LogFile "INFO: /etc/lilo.conf content"
3022    LogFile "-------------"
3023    cat /etc/lilo.conf >> $LOGFILE
3024fi
3025LogFile "Full fdisk info"
3026LogFile "---------------"
3027$FDISK -l >> $LOGFILE
3028LogFile "----------------"
3029
3030# Compute libata version
3031laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3032# If libata v2 is used then remove ide-generic as it will perturbate boot
3033if [ "`echo $MODULES | grep libata`" ]; then
3034    if [ "$laver" = "2" ]; then
3035        DENY_MODS="$DENY_MODS ide-generic"
3036        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3037        LogFile "-------------"
3038    fi
3039fi
3040
3041# Check for McAfee which disturbs the access to some files (tgz in articular)
3042if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3043    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3044    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3045    LogFile "WARNING: You have two options:"
3046    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3047    LogFile "WARNING:  - Disable the scanner during the backup"
3048fi
3049
3050# Check for ISO_CMD command
3051if [ ! -x $ISO_CMD ]; then
3052    LogFile "NOTE: No CD image (ISO file) utility found"
3053fi
3054
3055FLOPPY_WAS_MOUNTED=""
3056for mtpt in /media/floppy /mnt/floppy /floppy ; do
3057    if mount | grep -w $mtpt &> /dev/null ; then
3058        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3059        umount $mtpt
3060    fi
3061done
3062
3063#
3064# If we have a USB device we need to store info
3065# and remove it from the parameters line
3066#
3067if [ "$#" -ne "0" ] ; then
3068    if [ "$1" = "--usb" ] ; then
3069        shift
3070        USBDEVICE=$1
3071        if [ _"$USBDEVICE" = _"" ]; then
3072            Die "No USB device specified"
3073        fi
3074        shift
3075    fi
3076fi
3077
3078if [ "$#" -ne "0" ] ; then
3079    if [ "$1" = "--findkernel" ] ; then
3080        resk=`TryToFindKernelPath`
3081        # Avoids logfile content for mondo
3082        export MONDO_SHARE=""
3083        if [ "$resk" = "" ] ; then
3084            if [ $KERNEL_IS_XEN = "yes" ]; then
3085                echo "$xenkernelpath"
3086                LogFile "INFO: xenkernelpath = $xenkernelpath"
3087                MindiExit 0
3088            else
3089                MindiExit -1
3090            fi
3091        else
3092            echo "$resk"
3093            LogFile "INFO: kernelpath = $resk"
3094            MindiExit 0
3095        fi
3096    elif [ "$1" = "--locatedeps" ] ; then
3097        [ ! "$2" ] && Die "Please specify the binary to look at"
3098        LocateDeps $*
3099        # Avoids logfile content for mondo
3100        export MONDO_SHARE=""
3101        MindiExit $?
3102    elif [ "$1" = "--readalllink" ] ; then
3103        [ ! "$2" ] && Die "Please specify the binary to look at"
3104        # Avoids logfile content for mondo
3105        export MONDO_SHARE=""
3106        mr-read-all-link $2
3107        MindiExit $?
3108    elif [ "$1" = "--makemessage" ] ; then
3109        MakeMessageFile | cut -c1-80
3110        MindiExit 0
3111    elif [ "$1" = "--makemountlist" ] ; then
3112        [ ! "$2" ] && Die "Please specify the output file"
3113        MakeMountlist $2
3114        CheckMountlist $2
3115        # Avoids logfile content for mondo
3116        export MONDO_SHARE=""
3117        MindiExit $?
3118    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3119        echo "Mindi v$MINDI_VERSION"
3120        # Avoids logfile content for mondo
3121        export MONDO_SHARE=""
3122        MindiExit 0
3123    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3124        MONDO_TMP=$2
3125        # Change MINDI_TMP for the one provided by mondo
3126        # So that it can get back the built files
3127        if [ _"$MONDO_TMP" = _"" ]; then
3128            Die "MONDO_TMP is empty, aborting"
3129        fi
3130        if [ _"$MONDO_TMP" = _"/" ]; then
3131            Die "MONDO_TMP is /, aborting"
3132        fi
3133        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3134        rmdir $MINDI_TMP
3135        export MINDI_TMP=$MONDO_TMP
3136        mkdir -p $MINDI_TMP
3137
3138        # This is the scratch dir in mondo - subdir images
3139        MINDI_CACHE=$3
3140
3141        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3142        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3143       
3144###
3145### Sq-Modification...
3146### Attempt to locate kernel specific module path
3147### if module path is found then use it other wise use uname -r to set it...
3148###
3149        if [ $KERNEL_IS_XEN = "yes" ]; then
3150            LogAll "INFO: xenkernelpath = $xenkernelpath"
3151        fi
3152        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3153        if [ ! -d "/lib/modules/$kernelname" ]; then
3154           LogAll "WARNING: Module path for ${kernelpath} not found..."
3155           LogAll "         using running kernel\'s modules."
3156           kernelname=$KERVERRUN
3157        else
3158           LogAll "Using modules for kernel: ${kernelname}"
3159        fi
3160        LogAll "INFO: kernelname = $kernelname"
3161        LogAll "INFO: kernelpath = $kernelpath"
3162###
3163### end of Sq-Modification
3164###
3165        TAPEDEV=$5
3166        TAPESIZE=$6
3167        FILES_IN_FILELIST=$7
3168        USE_LZO=$8
3169        CDRECOVERY=$9
3170        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3171            IMAGE_DEVS=""
3172        else
3173            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3174        fi
3175        if [ "${11}" ] ; then
3176            LILO_OPTIONS=""
3177    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3178        fi
3179        LAST_FILELIST_NUMBER=${12}
3180        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3181        export MINDI_EXCLUDE_DEVS="${14}"
3182        USE_COMP="${15}"
3183        USE_LILO="${16}"
3184        USE_STAR="${17}"
3185        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3186        DIFFERENTIAL="${19}"
3187        USE_GZIP="${20}"
3188        NOT_BOOT="${21}"
3189        [ "$USE_COMP" = "" ] && USE_COMP=yes
3190        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3191        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3192        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3193        # MONDO_ROOT is the real scratchdir
3194        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3195        if [ _"$MONDO_ROOT" != _"" ]; then
3196            mkdir -p $MONDO_ROOT
3197        else
3198            Die "MONDO_ROOT is undefined"
3199        fi
3200    else
3201        LogScreen "Syntax: mindi (--custom ....)"
3202        MindiExit -1
3203    fi
3204fi
3205
3206if [ _"$MINDI_CACHE" != _"" ]; then
3207    rm -rf $MINDI_CACHE/* 2> /dev/null
3208    mkdir -p $MINDI_CACHE
3209fi
3210
3211[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3212
3213if [ _"$MONDO_SHARE" = _"" ]; then
3214    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3215    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3216    LogIt "BusyBox sources are available from http://www.busybox.net"
3217    LogIt "------------------------------------------------------------------------------"
3218else
3219    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3220fi
3221if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3222    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3223else
3224    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3225    MindiExit -1
3226fi
3227
3228for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3229    modinfo $i 2> /dev/null 1> /dev/null
3230    if [ $? -eq 0 ]; then
3231        modprobe $i 2>&1 > /dev/null
3232    fi
3233done
3234
3235KERN_DISK_MADE=""
3236
3237LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3238LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3239LogFile "NOT_BOOT = '$NOT_BOOT'"
3240if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3241    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3242    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3243    MakeMountlist $MINDI_TMP/mountlist.txt
3244    CheckMountlist $MINDI_TMP/mountlist.txt
3245    mkdir -p $MINDI_TMP/small-all/tmp
3246    cd "$MINDI_TMP/small-all"
3247    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3248    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3249    sleep 2
3250    LogIt "Done. Exiting."
3251    MindiExit 0
3252fi
3253
3254if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3255    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3256fi
3257
3258if [ "$kernelpath" = "" ] ; then
3259    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3260    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3261    read ch
3262    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3263        USE_OWN_KERNEL="yes"
3264    else
3265        USE_OWN_KERNEL="no"
3266    fi
3267    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3268        kernelpath=`TryToFindKernelPath`
3269        if [ "$kernelpath" = "" ] ; then
3270            echo -n "Please enter kernel path : "
3271            read kernelpath
3272        fi
3273    fi
3274fi
3275
3276echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3277[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3278
3279mountpoint=$MINDI_TMP/mountpoint.$$
3280PrepareDataDiskImages
3281
3282ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3283rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3284export ramdisk_size=$rds
3285
3286LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3287if [ "$ARCH" = "ia64" ] ; then
3288    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3289else
3290    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3291fi
3292
3293[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3294...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3295
3296if [ _"$MONDO_SHARE" = _"" ]; then
3297    ListImagesForUser
3298    OfferToMakeBootableISO
3299    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3300        OfferToMakeBootableUSB
3301    fi
3302    LogAll "Finished."
3303elif [ "$TAPEDEV" ] ; then
3304    if [ "$ARCH" != "ia64" ] ; then
3305        # We need to keep the img file as boot file for ia64 platform
3306        rm -f $MINDI_CACHE/{*img,*iso}
3307    else
3308        rm -f $MINDI_CACHE/*iso
3309    fi
3310    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3311        OfferToMakeBootableUSB
3312    fi
3313    OfferToMakeBootableISO
3314    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3315        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3316    else
3317        Die "Cannot find all.tar.gz, to be written to tape"
3318    fi
3319elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3320    OfferToMakeBootableUSB
3321else
3322    OfferToMakeBootableISO
3323fi
3324# cleanup
3325LogAll "INFO: $FRIENDLY_OUTSTRING"
3326for mtpt in $FLOPPY_WAS_MOUNTED ; do
3327    mount $mtpt
3328done
3329MindiExit 0
Note: See TracBrowser for help on using the repository browser.