source: branches/3.2/mindi/mindi @ 3317

Last change on this file since 3317 was 3317, checked in by Bruno Cornec, 6 years ago
  • removes a now useless line in mindi on minidir_root
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 119.8 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3317 2014-12-01 22:35:34Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38MRCFG=mondorestore.cfg
39
40# Temporary directory for mindi
41TMPDIR=/tmp
42
43EXTRA_SPACE=120000      # increase if you run out of ramdisk space
44BOOT_SIZE=65600         # size of the boot disk
45
46PROMPT_MAKE_CD_IMAGE="yes"
47    # Ask if you want to make a CD Image to be written?
48    # if this is set to 'no', then the image will be created automatically
49
50PROMPT_MAKE_USB_IMAGE="yes"
51    # Ask if you want to make a USB Image to be written?
52    # if this is set to 'no', then the image will be created automatically
53
54USE_OWN_KERNEL="yes"
55    # If set to "no", you will be prompted for whether or not
56    # you want to use your own kernel, or the supplied default.
57    # If "yes" mindi will automatically use your own kernel.
58
59KERNEL_IS_XEN="no"
60    # If set to "no", the kernel is not a Xen kernel
61    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
62xenkernelpath=""
63 
64MY_FSTAB=/etc/fstab
65TAPE_MODS="ht st osst ide-tape ide_tape"
66SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
67
68# ide-probe-mod
69IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio"
70PCMCIA_MODS="pcmcia_core ds yenta_socket"
71USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
72NET_MODS="nfs nfsv2 nfsv3 nfsv4 nfsd loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
73CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 vfat fat loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    Die "User abort."
224}
225
226
227AddFileToCfgIfExists() {
228    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
229}
230
231
232AddKeyboardMappingFile() {
233    local mappath r included_list included_item i res ii sss
234    mappath=$1
235    KBDEPTH=$(($KBDEPTH+1))
236    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
237    if [ -e "$bigdir/$mappath" ] ; then
238        LogFile "INFO: $mappath already added"
239        return
240    elif [ -d "$bigdir/$mappath" ] ; then
241        echo "Cannot add $mappath: it's a directory. Sorry."
242        return
243    fi
244    LogFile "INFO: Added kbd map $mappath"
245    if [ ! -e "$mappath" ] ; then
246        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
247        if [ ! -e "$mappath" ] ; then
248            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
249            return
250        fi
251    else
252        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
253    fi
254
255    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
256    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259    else
260        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261    fi
262    for included_item in $included_list ; do
263        if [ ! -e "$included_item" ] ; then
264            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266            for ii in $sss ; do
267                [ -e "$ii" ] && AddKeyboardMappingFile $ii
268            done
269        else
270            AddKeyboardMappingFile $included_item
271        fi
272    done
273}
274
275
276CopyDependenciesToDirectory() {
277    local outdir incoming counter d found tdir
278    outdir=$1
279    mkdir -p $outdir
280    incoming=`ReadLine`
281    counter=0
282    while [ "$incoming" != "" ] ; do
283        # Non absolute file names should not arrive till here => skipped
284        if [ `echo "$incoming" | cut -c1` != '/' ]; then
285            LogAll "WARNING: Unable to handle $incoming"
286            incoming=`ReadLine`
287            continue
288        fi
289        # no parent directory of incoming should be a link, copy is not possible in that case
290        d=`dirname "$incoming"`
291        found="false"
292        while [ $d != "/" -a $found = "false" ]; do
293            [ -h "$d" ] && found="true"
294            d=`dirname "$d"`
295        done
296        if [ -d "$incoming" -a ! -h "$incoming" ]; then
297            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298        elif [ -e "$incoming" ] && [ $found = "false" ]; then
299            if [ ! -h "$incoming" ]; then
300                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301            else
302                tdir=`dirname "$incoming"`
303                if [ ! -e "$outdir/$tdir" ]; then
304                    mkdir -p "$outdir/$tdir"
305                fi
306                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307            fi
308            # Only uncompress modules if not using udevd
309            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311            fi
312            [ -x "$outdir" ] && StripExecutable $outdir
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        incoming=`ReadLine`
317    done
318}
319
320
321CountItemsIn() {
322    local r
323    r=0
324    for q in $1 ; do
325        r=$(($r+1))
326    done
327    echo $r
328}
329
330
331DropOptimizedLibraries() {
332    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333    filelist=$1
334    outdir=$2
335
336    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337    if [ "$list_of_optimized_libraries" = "" ] ; then
338        return 0
339    fi
340    echo -en "Dropping i686-optimized libraries if appropriate"
341    for optimized_lib_name in $list_of_optimized_libraries ; do
342        echo -en "."
343        reason=""
344        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345        echo "$vanilla_lib_name" >> $filelist
346        LogFile "INFO: Adding $vanilla_lib_name to filelist"
347        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350        # This may return multiple files
351        for resolved in `mr-read-all-link $vanilla_lib_name`; do
352            LogFile "INFO: Adding as deps $resolved to filelist"
353            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354            if [ "$vanilla_resolved_name" != "$resolved" ]; then
355                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356                rmdir $outdir$resolved > /dev/null 2> /dev/null
357                ln -sf $vanilla_resolved_name $outdir$resolved
358                LogFile "INFO: Excluding deps $resolved" 
359                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
361                echo "$vanilla_resolved_name" >> $filelist.tmp
362                mv -f $filelist.tmp $filelist
363            fi
364        done
365    done
366    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367    mv -f $filelist.tmp $filelist
368    echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373    local r res mapfile mappath included_item included_list keyfile mp locale
374    LogAll "INFO: Analyzing your keyboard's configuration."
375    KEYDIR=/usr/lib/kbd
376    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
379    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
381    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
382    if [ ! -e "$KEYDIR" ] ; then
383        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
384        return 0
385    fi
386    if [ -e "/etc/sysconfig/keyboard" ] ; then
387        LogFile "INFO: Red Hat-style config detected."
388        keyfile=/etc/sysconfig/keyboard
389    elif [ -e "/etc/vconsole.conf" ] ; then
390        LogFile "INFO: New Fedora style config detected."
391        keyfile=/etc/vconsole.conf
392    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
393        LogFile "INFO: Slackware-style config detected."
394        keyfile=/etc/rc.d/rc.keymap
395    elif [ -e "/etc/rc.config" ] ; then
396        LogFile "INFO: Debian-style config detected."
397        keyfile=/etc/rc.config
398    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
399        LogFile "INFO: Debian-style config detected."
400        mkdir -p $bigdir/tmp
401        echo "keymap-lives-here /etc/console/boottime.kmap.gz" >> $bigdir/tmp/$MRCFG
402        KBDEPTH=0
403        mkdir -p $bigdir/etc/console
404        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
405        echo ""
406        echo -e "$DONE"
407        return 0
408    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
409        LogFile "INFO: Ubuntu-style config detected."
410        mkdir -p $bigdir/tmp
411        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
412            kbdfile="/etc/console-setup/boottime.kmap.gz"
413        else
414            kbdfile="/etc/console-setup/cached.kmap.gz"
415        fi
416        echo "keymap-lives-here $kbdfile" >> $bigdir/tmp/$MRCFG
417        KBDEPTH=0
418        mkdir -p $bigdir/etc/console-setup
419        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
420        echo ""
421        echo -e "$DONE"
422        return 0
423    elif [ -e "/etc/rc.conf" ] ; then
424        LogFile "INFO: ArchLinux config detected."
425        keyfile=/etc/rc.conf
426    elif [ -e "/etc/conf.d/keymaps" ] ; then
427        LogFile "INFO: Gentoo-style config detected."
428        keyfile=/etc/conf.d/keymaps
429    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
430        LogFile "INFO: X11-style config detected."
431        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
432    else
433        LogFile "Searching for rc.config ..."
434        keyfile=`find /etc -name rc.config | head -n1`
435        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
436            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
437            return
438        else
439            LogFile "INFO: Found $keyfile"
440        fi
441    fi
442    if [ ! -e "$KEYDIR/keymaps" ] ; then
443        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
444        return
445    fi
446    LogFile "INFO: keyfile=$keyfile"
447    # For SLES we need to remove the .map.gz extension Cf #614
448    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
449    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
450    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
451    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
452    LogFile "INFO: locale=$locale"
453    #
454    # Process the keymaps dir once for all
455    # AddKeyboardMappingFile will use it recursively
456    #
457    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
458    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
459    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
460    # If we have multiple keymaps then log it !!
461    echo "$mp" | grep -q " " >> $LOGFILE
462    if [ $? -eq 0 ]; then
463        LogAll "WARNING: Multiple keymaps found: $mp"
464        LogFile "INFO: The following one will be used"
465    fi
466    for i in $mp ; do
467        mappath=$i
468        [ -e "$i" ] && [ ! -d "$i" ] && break
469    done
470    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
471        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
472    fi
473    LogFile "INFO: mappath = $mappath"
474    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
475        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
476        return
477    fi
478    LogAll "INFO: Adding the following keyboard mapping tables: "
479    mkdir -p $bigdir/tmp
480    echo "keymap-lives-here $mappath" >> $bigdir/tmp/$MRCFG
481    KBDEPTH=0
482    AddKeyboardMappingFile $mappath
483    echo ""
484    echo -e "$DONE"
485    rm -f $MINDI_TMP/keymaps.find
486    return 0
487}
488
489
490FindLdlinux32Binary() {
491    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
492    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
495    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
496    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
497    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
498    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
499    if [ ! -e "$LDLINUXC32" ]; then 
500        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
501        LDLINUXC32=/tmp/idoesnthopefullyexist
502    else
503        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
504    fi
505}
506
507
508FindMboot32Binary() {
509    MBOOTC32=/usr/lib/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
514    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
515    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
516    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
517    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
518    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
519}
520
521FindIsolinuxBinary() {
522    ISOLINUX=/usr/lib/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
526    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
527    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
528    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
529    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
530    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
531    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
532}
533
534
535GenerateGiantDependencyList() {
536    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
537
538    echo -en "Analyzing dependency requirements"
539    outfile=$1
540    tempfile=$MINDI_TMP/$$.txt
541    incoming=`ReadLine`
542
543    > $tempfile
544    progress=0
545    res=0
546    noof_lines=$2
547    while [ "$incoming" != "" ] ; do
548        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
549            incoming=`ReadLine`
550            continue
551        fi
552        if [ "$incoming" = "LVMFILES:" ] ; then
553            break
554        fi
555        filelist=`GenerateListForFile "$incoming"`
556        r=$?
557        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
558        res=$(($res+$r))
559#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
560        for fname in $filelist ; do
561                [ "$fname" != "" ] && echo "$fname" >> $tempfile
562        done
563        progress=$(($progress+1))
564        LogProgress $progress $noof_lines
565        incoming=`ReadLine`
566    done
567    if  [ "$incoming" = "LVMFILES:" ] ; then
568        incoming=`ReadLine`
569        lvmversion=""
570        while [ "$incoming" != "" ] ; do
571            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
572                incoming=`ReadLine`
573                continue
574            fi
575            filelist=`GenerateListForFile "$incoming"`
576            for tool in $filelist ; do
577                lvmresolved=`readlink -f $tool`
578                if [ "$tool" = "$lvmresolved" ]; then
579                    echo "$tool" >> $tempfile
580                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
581                    if [ "$lvmversion" = "" ] ; then
582                        lvmversion=`$lvmresolved`
583                        echo "$lvmresolved" >> $tempfile
584                    fi
585                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
586                    if [ "$lvmversion" = "200" ]; then
587                        # pvdata and lvmcreate_initrd don't exist in LVM2
588                        case "$toolstripped" in
589                        "pvdata")
590                            continue
591                            ;;
592                        "lvmcreate_initrd")
593                            continue
594                            ;;
595                        esac
596                    fi
597                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
598                    if [ -e "$toolpath" ] ; then
599                        echo "$toolpath" >> $tempfile
600                        echo "$tool" >> $tempfile
601                    else
602                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
603                    fi
604                    if [ -e "$toolpath" ] ; then
605                        echo "$toolpath" >> $tempfile
606                        echo "$tool" >> $tempfile
607                    else
608                        echo "Where are your LVM-Tools? Couldn't find $tool"
609                    fi
610                else
611                    echo "$tool" >> $tempfile
612                fi
613            done
614            progress=$(($progress+1))
615            LogProgress $progress $noof_lines
616            incoming=`ReadLine`
617        done
618    fi
619    echo -en "$DONE\nMaking complete dependency list"
620
621    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
622    mv -f $tempfile.new $tempfile
623    > $outfile.pre
624    progress=0
625    noof_lines=`cat $tempfile | wc -l`
626    LogFile "---------------------------------"
627    LogFile "List of dependencies:             "
628    LogFile "---------------------------------"
629    for fname in `cat $tempfile` ; do
630        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
631        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
632        progress=$(($progress+1))
633        LogProgress $progress $noof_lines
634    done
635    if [ _"$MONDO_SHARE" != _"" ]; then
636        mkdir -p $bigdir/tmp
637        mkdir -p $bigdir/usr/bin
638        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
639            LogAll "\nINFO: Incorporating post-nuke tarball"
640            old_pwd=`pwd`
641            cd "$bigdir"
642            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
643            cd "$old_pwd"
644        fi
645        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
646            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
647        else
648            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
649            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
650            LogIt "       If Mindi was called by Mondo then send me a bug report."
651            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
652            LogIt "       Finally, run Mindi again."
653            Die "Odd."
654        fi
655        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
656        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
657            LogAll "\nINFO: Incorporating Network-related settings"
658            for r in NETFS-* ; do
659                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
660                LogFile "INFO: Copying $r to ramdisk"
661            done
662        fi
663    fi
664    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
665    rm -f $tempfile $outfile.pre
666    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
667    return $res
668}
669
670
671GenerateListForFile() {
672    local files_found loc fname incoming i res
673    incoming="$1"
674    files_found=""
675    res=0
676
677    for fname in $incoming ; do
678        files_found="$files_found `LocateFile $fname`"
679    done
680
681    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
682}
683
684
685# Returns all disk devices which are part of a raid array
686GetAllRaidMembers() {
687    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
688}
689
690
691GetFileSizeList() {
692    local i
693    for i in `find $1 -type d -o -print` ; do
694        du -sk $i
695    done
696}
697
698
699# Check kernel filesystem capabilites for accessing initrd image
700# Could be ext2 FS (old mode) or initramfs (new mode)
701#
702# Interface definition:
703# param #1: absolute path to kernel image
704GetInitrdFilesystemToUse() {
705
706    # interface test: make sure we have one parameter
707    if [ $# -ne 1 ]; then
708        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
709    fi
710
711    # interface parameters
712    local lvKernelImage=$1
713
714    # local constants (filesystem magic strings)
715    local lcMagicCramfs="<3>cramfs: wrong magic"
716    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
717    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
718    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
719
720    # local variables
721    local lvOffset
722    local lvScanRes
723    local lvUseFilesystem
724
725    # say where we are.
726    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
727
728    # verify that file exists
729    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
730
731    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
732    file $lvKernelImage 2>&1 | grep -q gzip
733    if [ $? -eq 0 ]; then
734        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
735        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
736    else
737        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
738        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
739        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
740        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
741        if [ $lvOffset -eq 0 ]; then
742            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
743            lvScanRes=$lcMagicInitfs
744        else
745            lvOffset=`expr $lvOffset / 2`
746            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
747            # scan again  kernel image
748            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
749        fi
750    fi
751
752    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
753    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
754        lvUseFilesystem="ext2fs"
755    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
756        lvUseFilesystem="ext3fs"
757    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
758        lvUseFilesystem="initramfs"
759    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
760        lvUseFilesystem="cramfs"
761    else
762        # In that case, we are most probably after 2.6.30 and use the supported initramfs
763        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
764        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
765        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
766        lvUseFilesystem="initramfs"
767    fi
768
769    # say what we are using
770    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
771
772    # return file system to use
773    echo "$lvUseFilesystem"
774
775}
776
777# Searches members of raid device
778# $1: raid device (/dev/md...)
779GetRaidDevMembers() {
780    if [ ! -f /etc/raidtab ]; then 
781        return
782    fi
783    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
784}
785
786
787ListAllPartitions() {
788    local res currline partition all_partitions ap_orig remaining i j
789
790    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
791    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
792    if [ -e "/vmfs/volumes" ]; then
793        # For VMWare ESX 3 get the device names of these volumes
794        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
795    fi
796    return
797}
798
799
800ListImagesForUser() {
801    local path fname
802    path=$MINDI_CACHE
803    echo -en "In the directory '$path' you will find the images:-\n"
804    for fname in `ls $path | grep -F mindi-` ; do
805        printf "%19s " $fname
806    done
807    echo " "
808}
809
810
811ListKernelModulePaths() {
812    local module_list module fname r kern
813    module_list="$MODULES"
814    # Remove unwanted modules from list
815    for i in $DENY_MODS; do
816        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
817    done
818###
819### Sq-Modification ... Use kernelname for module search path if specified
820###
821    if [ "${kernelname}" != "" ]
822    then
823        kern=${kernelname}
824    else
825        kern="$KERVERRUN"
826    fi
827    export KERVER=$kern
828###
829### Sq-Mod End
830###
831    # Get rid of duplicates
832    for module in `echo $module_list | tr ' ' '\n' | sort -u` ; do
833        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
834        if [ -z "$r" ]; then
835            if [ "`echo "$MODULES" | grep -w $module`" ]; then
836                r="[live module file not found]"
837            else
838                r="[extra module file not found]"
839            fi
840        else
841            [ -f "$r" ] && echo "$r"
842        fi
843        LogFile "INFO: module $module --> $r"
844    done
845    find /lib/modules/$kern/modules.* -type f 2> /dev/null
846}
847
848#
849# Critical function which computes all dependencies (dyn. lib.)
850# for a list of binaries
851#
852LocateDeps() {
853    local incoming fname deps
854    incoming="$*"
855    deps=""
856
857    for fname in $incoming ; do
858        if [ ! -e "$fname" ] ; then
859            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
860            if echo $fname | grep lvm &> /dev/null ; then
861                LogFile "          This warning only affects you if you are using LVM."
862                if echo "$MODULES" | grep lvm &> /dev/null ; then
863                    LogFile "          I think you are, so please take heed!"
864                else
865                    LogFile "          I don't think you are, so don't worry about it."
866                fi
867            fi
868        else
869            deps="$deps $fname" 
870        fi
871    done
872    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
873}
874
875
876LocateFile() {
877    local i j path fname_to_find location output resolved tmp stub cache_id loclist
878    fname_to_find="$1"
879    # It's an absolute path
880    j=`echo "$fname_to_find" | cut -c1`
881    if [ _"$j" = _"/" ]; then
882        dn=`dirname $fname_to_find`
883        # We suppose that the link is already included, just add the new file
884        if [ -h "$dn" ]; then
885            newdn=`readlink -f $dn`
886            bn=`basename $fname_to_find`
887            output="$newdn/$bn"
888        else
889            output="$fname_to_find"
890        fi
891        if [ -h "$output" ] ; then
892            output="`mr-read-all-link $output` $output"
893        fi
894        echo "$output"
895        return 0
896    fi
897    # It's not an absolute path
898    output=""
899    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
900    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
901        [ -h "$path" ] && continue
902        [ ! -e "$path/$fname_to_find" ] && continue
903        output="$path/$fname_to_find $output"
904        if [ -h "$path/$fname_to_find" ] ; then
905            output="`mr-read-all-link $path/$fname_to_find` $output"
906        fi
907    done
908    if [ "$output" = "" ] ; then
909        return 1
910    fi
911    echo "$output"
912    return 0
913}
914
915LogProgress() {
916    local i progress modres noof_lines title
917 
918    progress=$1
919    noof_lines=$2
920    title=$3
921
922    i=$(($progress*100))
923    if [ $noof_lines -ne 0 ]; then
924        i=$(($i/$noof_lines))
925    else
926        i=0
927    fi
928
929    if [ _"$MONDO_SHARE" != _"" ]; then 
930        echo "$title        $i%"
931    else
932        echo -en "\r\t\t\t\t\t\t\t\t"
933        echo -en "$i"
934        echo -en "%"
935        modres=$(($progress%4))
936        [ "$modres" -eq "0" ] && echo -en "\t/"
937        [ "$modres" -eq "1" ] && echo -en "\t-"
938        [ "$modres" -eq "2" ] && echo -en "\t\\"
939        [ "$modres" -eq "3" ] && echo -en "\t|"
940    fi
941}
942
943# Called by TurnTgzIntoRdz, to make /tmp/$MRCFG
944MakeMondoConfigFile() {
945    local outfile use_lzo use_comp use_star
946    outfile=$1
947    > $outfile
948    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
949    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
950    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
951    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
952    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
953    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
954    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
955    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
956    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
957    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
958    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
959    echo "use-lzo $use_lzo" >> $outfile
960    echo "use-gzip $use_gzip" >> $outfile
961    echo "use-star $use_star" >> $outfile
962    echo "use-lzma $use_lzma" >> $outfile
963    echo "use-comp $use_comp" >> $outfile
964    echo "datestamp `date`" >> $outfile
965    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
966    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
967    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
968    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
969    AddFileToCfgIfExists $MINDI_TMP/ISO-DIR           iso-dir           $outfile
970    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
971    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
972    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver    $outfile
973    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
974    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
975    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
976    AddFileToCfgIfExists $MINDI_TMP/ACL               acl               $outfile
977    AddFileToCfgIfExists $MINDI_TMP/XATTR             xattr             $outfile
978    AddFileToCfgIfExists $MINDI_TMP/OBDR              obdr              $outfile
979
980    # Deal with network configuration in a portable way
981    if [ -f $MINDI_TMP/NETFS-SERVER-MOUNT ]; then
982        mr-net-get-config `cat $MINDI_TMP/NETFS-SERVER-MOUNT` >> $outfile
983    fi
984}
985
986# Get PV's for an LV
987GetPVsForLV() {
988  if [ -n "$1" ]; then
989    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
990    if [ -z "$vg" ]; then
991      return
992    fi
993    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
994  fi
995}
996
997
998MakeMountlist() {
999    local mountlist all_partitions current_partition \
1000partition_size partition_format outstring partition_number \
1001partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1002absolute_partition old_partition_fmt current_lvolume uname skip
1003
1004    LogFile "------------------------------------"
1005    LogFile "Your raw fstab file looks like this:"
1006    LogFile "------------------------------------"
1007    cat $MY_FSTAB >> $LOGFILE
1008    LogAll "-----------------------------------"
1009    LogAll "Your mountlist will look like this:"
1010    LogAll "-----------------------------------"
1011
1012# mountlist(OUT)
1013    mountlist=$1
1014
1015# NB: partition = device
1016# NB: mountpt = where the device is mounted
1017
1018    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1019
1020    [ "$mountlist" != "" ] && rm -Rf $mountlist
1021    > $mountlist
1022    all_partitions=""
1023   
1024    if [ $LVM != "false" ]; then
1025        LogAll "INFO: Analyzing LVM..."
1026        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1027        if [ $? -ne 0 ]; then
1028            LVM="false"
1029        fi
1030        # Excluded LVs and GVs are not reported here
1031        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1032    fi
1033    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1034    for i in $IMAGE_DEVS ; do
1035        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1036    done
1037    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1038    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1039    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1040    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1041    for c_p in $all_partitions ; do
1042        # Skip fd/cd devices, network FS, cifs
1043        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1044        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1045        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1046            current_partition=`readlink -f $c_p`
1047            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1048                current_partition="$c_p"
1049            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1050                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1051                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1052            fi
1053            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1054        else
1055            current_partition="$c_p"
1056        fi
1057        [ "$c_p" = "none" ] && continue
1058        redhat_label=""
1059        label=""
1060        uuid=""
1061        absolute_partition=`readlink -f $c_p`
1062        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1063
1064        # set default in case we dont't find it
1065        str_to_find_fmt_with=$current_partition
1066
1067        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1068        # current_partition contains only first column of /etc/fstab
1069        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1070            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1071            actual_dev=""
1072
1073            # 1st try, findfs - the RHEL way of finding labels and their partitions
1074            if [ -x "/sbin/findfs" ]; then
1075                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1076            fi
1077   
1078            # 2nd try : blkid, the good way for all LABEL except swap
1079            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1080                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1081                # For LVM FS it will give a /dev/dm-# which should then be converted
1082                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1083                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1084                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1085                    for dev in `ls /dev/mapper/*`; do
1086                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1087                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1088                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1089                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1090                            break
1091                        fi
1092                    done
1093                fi
1094            fi
1095   
1096            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1097            # For LVM gives a /dev/mapper entry
1098            if [ "x$actual_dev" = "x" ]; then
1099                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1100            fi
1101   
1102            # 4th try, with vol_id
1103            # SWAP only
1104            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1105                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1106                for dev_swap in $list_swaps ; do
1107                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1108                    if [ "x$dev_exists" != "x" ]; then
1109                        actual_dev=$dev_swap
1110                        break;
1111                    fi
1112                done
1113            fi
1114
1115            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1116            # LABEL=SW-cciss/c0d0p3 (RDP)
1117            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1118            # SWAP only
1119            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1120                    skip=""
1121                    uname=$KERVERRUN
1122                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1123                    # 2.6.12 needs 16 (FC3)
1124                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1125                    # 2.6.19 and upper needs 1052
1126                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1127                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1128                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1129                    if [ $skip = "" ]; then
1130                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1131                    fi
1132                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1133                    do
1134                        # Location of the swap label for kernel 2.6
1135                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1136                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1137                            actual_dev=$try_dev
1138                        fi
1139                    done
1140            fi
1141
1142            # Check if one of all those tries has known success
1143            if [ "x$actual_dev" != "x" ]; then
1144                current_partition=$actual_dev
1145            else
1146                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1147            fi
1148        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1149        # current_partition contains only first column of /etc/fstab
1150        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1151            uuid=`echo "$current_partition" | cut -d'=' -f2`
1152            actual_dev=""
1153
1154            # 1st try, findfs - the RHEL way of finding labels and their partitions
1155            if [ -x "/sbin/findfs" ]; then
1156                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1157            fi
1158   
1159            # 2nd try : blkid, the good way for all UUID except swap
1160            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1161                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1162                # For LVM FS it will give a /dev/dm-# which should then be converted
1163                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1164                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1165                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1166                    for dev in `ls /dev/mapper/*`; do
1167                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1168                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1169                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1170                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1171                            break
1172                        fi
1173                    done
1174                fi
1175            fi
1176   
1177            # 3th try, with vol_id
1178            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1179                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1180                for dev in $list_dev ; do
1181                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1182                    if [ "x$dev_exists" != "x" ]; then
1183                        actual_dev=$dev
1184                        break;
1185                    fi
1186                done
1187            fi
1188
1189            # 4th try, with dumpuuid (VMWare only ?) for swap
1190            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1191                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1192                for dev in $list_dev ; do
1193                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1194                    if [ "x$dev_exists" != "x" ]; then
1195                        actual_dev=$dev
1196                        break;
1197                    fi
1198                done
1199            fi
1200
1201            # Check if one of all those tries has known success
1202            if [ "x$actual_dev" != "x" ]; then
1203                current_partition=$actual_dev
1204            else
1205                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1206            fi
1207        else
1208            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1209            # they use symlinks in fstab unrelated to what is shown in mount !
1210            if [ _"$partition_mountpt" = _"" ]; then
1211                # set default in case we dont't find it
1212                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1213                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1214                            str_to_find_fmt_with=$tmpp
1215                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1216                            break;
1217                        fi
1218                done
1219            fi
1220        fi
1221
1222        # Detects noauto partitions not mounted and exclude them
1223        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1224        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1225                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1226            continue
1227        fi
1228        # Detects bind partitions and exclude them
1229        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1230                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1231            continue
1232        fi
1233
1234        # Look for devices which have to be excluded
1235        skip=0
1236        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1237            l=""
1238            list_of_devices="`mr-read-all-link $current_partition`"
1239            for d in $list_of_devices; do
1240                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1241            done
1242
1243            # Remove PVs from LVs excluded
1244            l="$l `GetPVsForLV $current_partition`"
1245
1246            # We want a single unique list
1247            list_of_devices="`echo $l | sort -u`"
1248
1249            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1250                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1251                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1252                    skip=1
1253                    continue
1254                fi
1255            done
1256        fi
1257        if [ $skip -eq 1 ]; then
1258            continue
1259        fi
1260
1261        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1262        # Detects iso9660 ISO images and exclude them
1263        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1264                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1265            continue
1266        fi
1267        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1268        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1269        # the former is then a link to the latter, so we test whether
1270        # $current_partition is actually such a link or not and set
1271        # $current_lvolume accordingly. On Debian you may find more than one answer
1272        # so we remove the one corresponding to /dev/.static
1273        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1274        # principle is the same and we need to find the link to it as well.
1275        # Note that $current_lvolume may well be an
1276        # ordinary device. It is just to make sure that we feed the right value
1277        # into any of the LVM tools if possible.
1278
1279        current_lvolume="$current_partition"
1280        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1281            # .static dir are a Debian specificity
1282            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1283            echo $current_lvolume | grep -q ' '
1284            if [ $? -eq 0 ]; then
1285                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1286            fi
1287            # if it's not found, it may well be a real device such as a multipath one
1288            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1289            if [ _"$current_lvolume" = _"" ]; then
1290                current_lvolume="$current_partition"
1291            fi
1292        fi
1293        #
1294        # End of LVM device style variation code (other than $current_lvolume).
1295
1296        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1297            # Size computed via LVM not directly
1298            partition_size="lvm"
1299        else
1300            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1301            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1302            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1303                # Skip swap files
1304                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1305                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1306                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1307                [ "$partition_format" != "swap" ] && partition_format="swap"
1308                if [ "$partition_size" = "" ] ; then
1309                    totalsize=0
1310                    items=0
1311                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1312                        totalsize=$(($totalsize+$i))
1313                        items=$(($items+1))
1314                    done
1315                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1316                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1317                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1318                fi
1319            else
1320                partition_size=`SizeOfPartition $current_partition`
1321            fi
1322        fi
1323        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1324        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1325        if [ "$partition_mountpt" = "" ] ; then
1326            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1327                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1328                    partition_mountpt="raid"
1329                    partition_format="raid"
1330                else
1331                    partition_mountpt="lvm"
1332                    partition_format="lvm"
1333                fi
1334            fi
1335        fi
1336        psz=$partition_size
1337        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1338        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1339        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1340            partition_mountpt="image"
1341            old_partition_fmt=$partition_format
1342            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1343            partition_size=$(($partition_size+1)); # just in case
1344            if [ "$partition_format" = "Linux" ] ; then
1345                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1346                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1347                partition_format=$old_partition_fmt
1348            fi
1349        fi
1350
1351        if [ ! "$partition_mountpt" ] ; then
1352            LogFile "------- $FDISK -l $qq log ------------"
1353            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1354                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1355                [ "$partition_format" ] && break
1356            done
1357            LogFile "------- $FDISK log end ------------"
1358            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1359                partition_format="compaq"
1360            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1361                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1362                continue
1363            fi
1364        fi
1365        if [ "$redhat_label" ]; then
1366            label="$redhat_label"
1367        elif [ "$uuid" ]; then
1368            label="$uuid"
1369        fi
1370        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1371        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1372        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1373        if [ "$current_partition" = "" ] ; then
1374            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1375        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1376            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1377                partition_mountpt=raid
1378                partition_format=raid
1379                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1380                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1381            else
1382                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1383            fi
1384        elif [ "$partition_format" = "" ] ; then
1385            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1386        elif [ "$partition_size" = "" ] ; then
1387            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1388        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1389            continue
1390        else
1391            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1392                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1393                partition_format="vfat"
1394            fi
1395            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1396            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1397        fi
1398    done
1399    LogAll "-----------------------------------" 
1400}
1401
1402CheckMountlist() {
1403    local file=$1
1404    # Coherency verification
1405    ML01=`cat $file | wc -l`
1406    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1407    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1408    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1409    if [ "$ML01" -ne "$ML1" ]; then
1410        LogFile "--------------------------------------------"
1411        LogAll "WARNING: Duplicate device entry in mountlist"
1412        LogFile "--------------------------------------------"
1413    fi
1414    if [ "$ML02" -ne "$ML2" ]; then
1415        LogFile "--------------------------------------------"
1416        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1417        LogFile "------------------------------------------------"
1418    fi
1419}
1420
1421OfferToMakeBootableISO() {
1422    local i old_pwd
1423    if [ -z "$ISO_CMD" ]; then
1424        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1425        return
1426    fi
1427    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1428        echo -en "Shall I make a bootable CD image? (y/[n]) "
1429        read i
1430        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1431    fi
1432    rm -Rf $MINDI_TMP/iso
1433    mkdir -p $MINDI_TMP/iso/{images,archives}
1434    LogFile "INFO: mindi_lib = $MINDI_LIB"
1435    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1436    for i in memdisk memtest.bin memtest.img ; do
1437        j=$MINDI_LIB/$i
1438        k=$MINDI_TMP/iso
1439        if [ -e "$j" ] ; then
1440            LogAll "INFO: Copying $j to $k"
1441            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1442            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1443            if [ _"$MONDO_SHARE" != _"" ]; then 
1444                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1445            fi
1446        fi
1447    done
1448    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1449    if [ $KERNEL_IS_XEN = "yes" ]; then
1450        FindMboot32Binary
1451        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1452        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1453    fi
1454    # Useful for syslinux 5.x
1455    FindLdlinux32Binary
1456    if [ -e $LDLINUXC32 ]; then
1457        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1458    fi
1459    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1460    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1461
1462    if [ _"$MONDO_SHARE" != _"" ]; then 
1463        if [ $KERNEL_IS_XEN = "yes" ]; then
1464            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1465            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1466        fi
1467        if [ -e $LDLINUXC32 ]; then
1468            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1469        fi
1470        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1471        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1472    fi
1473    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1474    if [ "$ARCH" != "ia64" ] ; then
1475        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1476    fi
1477    old_pwd=`pwd`
1478    cd "$MINDI_TMP/iso"
1479    if [ "$ARCH" != "ia64" ] ; then
1480        if [ _"$MONDO_SHARE" != _"" ]; then 
1481            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1482            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1483                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1484            fi
1485            if [ $KERNEL_IS_XEN = "yes" ]; then
1486                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1487            fi
1488            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1489        fi
1490        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1491    else
1492        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1493    fi
1494    if [ "$?" -ne "0" ] ; then
1495        LogFile "----------- $ISO_CMD's errors --------------"
1496        LogAll "$ISO_CMD returned the following errors:"
1497        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1498        LogAll "ERROR: Failed to create ISO image."
1499    else
1500        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1501    fi
1502    rm -f $MINDI_TMP/mkisofs.log
1503    cd "$old_pwd"
1504}
1505
1506
1507OfferToMakeBootableUSB() {
1508    local i
1509    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1510        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1511        read i
1512        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1513        if [ "$USBDEVICE" = "" ]; then
1514            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1515            read dev
1516            USBDEVICE=$dev
1517        fi
1518        echo "WARNING: This will erase all content on $USBDEVICE"
1519        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1520        read i
1521        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1522    fi
1523    rm -Rf $MINDI_TMP/usb
1524    mkdir -p $MINDI_TMP/usb
1525    USBPART="${USBDEVICE}1"
1526
1527    echo -en "Transforming $USBDEVICE in a Bootable device " 
1528    echo -en "."
1529    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1530    LogFile "INFO: Checking $USBDEVICE"
1531    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1532    if [ $? -ne 0 ]; then
1533        LogAll "ERROR: Unable to access $USBDEVICE"
1534        LogAll "       Make sure your USB device is plugged in"
1535        MindiExit -1
1536    fi
1537    echo -en "."
1538    # Some distro do auto mount at that point (Ubuntu)
1539    LogFile "INFO: Unmounting $USBPART just in case"
1540    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1541    # If your key has no MBR it may cause an issue
1542    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1543    if [ -r $MBRFILE ]; then
1544        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1545        dd if=$MBRFILE of=$USBDEVICE
1546    else
1547        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1548        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1549    fi
1550    LogFile "INFO: Preparing $USBDEVICE"
1551    cat > $MINDI_TMP/fdisk.txt << EOF
1552d
1553d
1554d
1555d
1556n
1557p
15581
1559
1560
1561t
1562b
1563a
15641
1565w
1566EOF
1567    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1568    if [ $? -ne 0 ]; then
1569        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1570        LogAll "       Make sure your USB device is plugged in"
1571        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1572        MindiExit -1
1573    fi
1574    LogFile "fdisk build file"
1575    LogFile "----------------"
1576    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1577    LogFile "----------------"
1578    rm -f $MINDI_TMP/fdisk.txt
1579    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1580    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1581    echo -en "."
1582    # Calling kpartx in case devices were not created
1583    if [ -x "/sbin/kpartx" ]; then
1584        /sbin/kpartx -a $USBDEVICE
1585    fi
1586    # Some distro do auto mount at that point (Ubuntu)
1587    LogFile "INFO: Unmounting $USBPART just in case again"
1588    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1589    echo -en "."
1590    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1591    if [ "`which dmsetup`" != "" ]; then
1592        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1593        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1594            LogFile "INFO: Removing $block_id from device mapper."
1595            sleep 1
1596            dmsetup remove $block_id
1597        fi
1598    fi
1599    echo -en "."
1600    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1601    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1602    if [ $? -ne 0 ]; then
1603        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1604        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1605        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1606        MindiExit -1
1607    fi
1608    echo -en "."
1609    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1610    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1611    if [ $? -ne 0 ]; then
1612        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1613        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1614        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1615        MindiExit -1
1616    fi
1617    echo -en "."
1618    mkdir -p $MINDI_TMP/usb/images
1619    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1620    echo -en "."
1621    LogFile "INFO: mindi_lib = $MINDI_LIB"
1622    for i in memdisk memtest.bin memtest.img ; do
1623        j=$MINDI_LIB/$i
1624        k=$MINDI_TMP/usb
1625        if [ -e "$j" ] ; then
1626            LogIt "INFO: Copying $j to $k"
1627            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1628            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1629        fi
1630    done
1631    echo -en "."
1632    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1633    echo -en "."
1634    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1635    echo -en "."
1636    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1637    echo -en "."
1638    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1639    echo -en "."
1640    LogAll "----------- syslinux's conf --------------"
1641    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1642    LogAll "------------------------------------------"
1643    umount $MINDI_TMP/usb
1644    if [ "$ARCH" != "ia64" ] ; then
1645        syslinux -v 2>&1 | grep -q 4.02
1646        if [ $? -eq 0 ]; then
1647            # This buggy version of syslinux requires a call to --stupid and not -s
1648            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1649            res=$?
1650        else
1651            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1652            res=$?
1653        fi
1654        if [ $res -ne 0 ] ; then
1655            LogAll "----------- syslinux's errors --------------"
1656            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1657            LogAll "------------------------------------------"
1658            LogIt "ERROR: Failed to create USB image."
1659        else
1660            echo -e "$DONE"
1661            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1662        fi
1663        rm -f $MINDI_TMP/syslinux.log
1664    else
1665        LogAll "ERROR: No USB boot support for ia64"
1666        MindiExit -1
1667    fi
1668}
1669
1670
1671MakeMessageFile() {
1672   
1673    if [ -x "/bin/lsb_release" ]; then
1674        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1675    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1676        DESC="Arch Linux"
1677        if [ -r /var/log/pacman.log ]; then
1678            # there are no releases but we can get the last system upgrade
1679            # Output example:   Arch Linux [2011-03-03 01:39]
1680            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1681        fi
1682    elif [ -r /etc/issue.net ]; then
1683        DESC=`head -1 /etc/issue.net`
1684    elif [ -r /etc/issue ]; then
1685        DESC=`head -1 /etc/issue`
1686    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1687        # For pb >= 0.9.8
1688        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1689    else
1690        DESC="Unknown desc"
1691    fi
1692    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1693    if [ _"$MONDO_SHARE" != _"" ]; then
1694        if [ "$CDRECOVERY" != "yes" ] ; then
1695            if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1696                echo -en "Press <0eenter07> for 0cnetwork restore07\n"
1697                echo -en "$BOOT_MEDIA_MESSAGE"
1698            elif [ ! "$MINDI_TMP" ] ; then
1699                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1700                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1701                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1702                fi
1703            else
1704                echo -en "$BOOT_MEDIA_MESSAGE"
1705            fi
1706        else
1707            echo -en "\
1708To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1709CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1710        fi
1711    fi
1712
1713    # Also create the other help screens
1714    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1715    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1716    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1717}
1718
1719
1720MakeBootConfFile() {
1721    local options i ooo
1722    options=""
1723    # Type of boot file (elilo or syslinux/isolinux)
1724    type=$1
1725    if [ "$type" = "elilo" ]; then
1726        sep="="
1727    else
1728        sep=" "
1729    fi
1730
1731    # Generic header for conf file
1732    if [ "$type" != "elilo" ] ; then
1733        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1734    else
1735        echo -en "prompt\n"
1736    fi
1737
1738    # Compute which default option to boot from
1739    if [ "$CDRECOVERY" = "yes" ] ; then
1740        echo -en "default${sep}RESTORE\n"
1741    # In case it's mondoarchive
1742    elif [ _"$MONDO_SHARE" != _"" ]; then
1743        if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
1744            echo -en "default${sep}iso\n"
1745        else
1746            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1747        fi
1748    else
1749        echo -en "default${sep}expert\n"
1750    fi
1751
1752    # Handle timeout
1753    if [ "$CDRECOVERY" != "yes" ] ; then
1754        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1755    else
1756        echo -en "timeout${sep}10000\n"
1757    fi
1758    echo -en "\n"
1759
1760    # prepare which labels will be generated
1761    if [ "$CDRECOVERY" = "yes" ] ; then
1762        options="RESTORE expert"
1763    else
1764        if [ _"$MONDO_SHARE" != _"" ]; then
1765            options="interactive expert compare iso nuke isonuke"
1766        else
1767            options="expert"
1768        fi
1769    fi
1770
1771    # Generate rest of conf file
1772    for i in $options ; do
1773        ooo=$i
1774        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1775        if [ "$type" = "elilo" ]; then
1776            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1777        else
1778            ps="/"
1779            if [ "$type" = "syslinux" ]; then
1780                ps=""
1781            fi
1782            if [ $KERNEL_IS_XEN = "no" ]; then
1783                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1784            else
1785                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1786            fi
1787        fi
1788        echo -en "$outstr"
1789    done
1790    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1791        if [ "$type" = "elilo" ]; then
1792            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1793            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1794        else
1795            ps="/"
1796            if [ "$type" = "syslinux" ]; then
1797                ps=""
1798            fi
1799            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1800            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1801        fi
1802    fi
1803}
1804
1805
1806PrepareBootDiskImage_LILO() {
1807    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1808    imagesdir=$MINDI_CACHE
1809    kernelpath=$1
1810
1811    retval=0
1812
1813    old_pwd=`pwd`
1814    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1815    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1816    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1817    echo -en "..."
1818    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1819    mkdir -p $mountpoint
1820    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1821    LogFile "Creating vfat filesystem on $imagefile" 
1822    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1823    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1824
1825    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1826    mkdir -p $mountpoint/etc
1827    liloconf=$mountpoint/elilo.conf
1828
1829    MakeBootConfFile elilo > $liloconf
1830
1831    # Copy it so that CD-ROM menu entry is satisfied
1832    mountefi=0
1833    df -T | grep /boot/efi | grep -q vfat
1834    if [ $? -ne 0 ]; then
1835        mount /boot/efi
1836        if [ $? -ne 0 ]; then
1837            echo "You have to mount your EFI partition when using mindi"
1838            MindiExit -1
1839        fi
1840        mountefi=1
1841    fi
1842    el=`find /boot/efi -name elilo.efi`
1843    cp $el $mountpoint
1844    cp $liloconf $mountpoint
1845    if [ $mountefi -eq 1 ]; then
1846        umount /boot/efi 2>&1 > /dev/null
1847    fi
1848
1849    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1850    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1851    if [ "$?" -ne "0" ] ; then
1852        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1853        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1854        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1855        rm -f $MINDI_TMP/mtpt.$$
1856        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1857        retval=$(($retval+1))
1858    fi
1859    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1860
1861    mkdir -p $mountpoint/tmp
1862    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1863        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1864    fi
1865
1866    # copy the kernel across
1867    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1868    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1869    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1870    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1871    if [ "$?" -ne "0" ] ; then
1872        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1873        du -sk $mountpoint/* >> $LOGFILE
1874        LogFile "--- end of list of files ---"
1875        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1876        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1877        cd "$old_pwd"
1878        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1879        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1880    #   losetup /dev/loop0 -d
1881        [ "$imagefile" != "" ] && rm -f $imagefile
1882        LogIt "ERROR: Sorry, your kernel is too big for your image"
1883        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1884        return 0
1885    fi
1886    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1887    LogFile "INFO: Free space left on image = $free_space KB"
1888    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1889    # make it bootable
1890    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1891    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1892    if [ "$KERN_DISK_MADE" ] ; then
1893        LogFile "INFO: Not running LILO. It's not that kind of disk."
1894    fi
1895
1896    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1897    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1898    echo -en "..."
1899    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1900    if [ "$retval" -eq "0" ] ; then
1901        echo -en "...$DONE\n"
1902        if [ "$KERN_DISK_MADE" ] ; then
1903            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1904        fi
1905    else
1906        echo -en "...failed\n"
1907        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1908        [ "$imagefile" != "" ] && rm -f $imagefile
1909    fi
1910    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1911    return $retval
1912}
1913
1914
1915PrepareBootDiskImage_ISOLINUX() {
1916    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1917    imagesdir=$MINDI_CACHE
1918    kernelpath=$1
1919    do_boot_root_thingy=""
1920    retval=0
1921
1922    old_pwd=`pwd`
1923    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1924    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1925    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1926    echo -en "..."
1927    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1928    mkdir -p $mountpoint
1929    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1930    LogFile "INFO: Creating vfat filesystem on $imagefile"
1931    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1932    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1933    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1934
1935    # Only move it now to its final destination and use it now
1936    mv $imagefile $imagesdir
1937    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1938
1939    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1940
1941    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1942    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1943    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1944    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1945    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1946    if [ "$?" -ne "0" ] ; then
1947        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1948        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1949        LogAll "       Please unload some of your modules and try again."
1950        rm -f $MINDI_TMP/mtpt.$$
1951        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1952        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1953        retval=$(($retval+1))
1954    fi
1955
1956    mkdir -p $mountpoint/tmp
1957    if [ -f "$MINDI_TMP/$MRCFG" ]; then
1958        cp -f $MINDI_TMP/$MRCFG $mountpoint/tmp
1959    fi
1960
1961    # copy the kernel across
1962    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1963    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1964    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1965         
1966    retval=0
1967    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1968    retval=$?
1969    if [ $KERNEL_IS_XEN = "yes" ]; then
1970        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1971        let retval+=$?
1972    fi
1973 
1974    if [ "$retval" -ne "0" ] ; then
1975        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1976        du -sk $mountpoint/* >> $LOGFILE
1977        LogFile "--- end of list of files ---"
1978        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1979        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1980        cd "$old_pwd"
1981        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1982        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1983
1984        LogIt "ERROR: Sorry, your kernel is too big for your image"
1985        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1986    fi
1987    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1988    LogFile "INFO: Free space left on image = $free_space KB"
1989    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1990
1991    # make it bootable
1992    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1993    mkdir -p $mountpoint/etc
1994    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1995    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1996    echo -en "..."
1997    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
1998
1999    if [ "$retval" -eq "0" ] ; then
2000        echo -en "...$DONE\n"
2001        if [ "$KERN_DISK_MADE" ] ; then
2002            [ "$imagefile" != "" ] && rm -f $imagefile
2003            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2004        fi
2005    else
2006        echo -en "...failed\n"
2007        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2008        [ "$imagefile" != "" ] && rm -f $imagefile
2009    fi
2010    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2011    return $retval
2012}
2013
2014
2015ParseModprobeForIncludes() {
2016local MODPROBE_CONF mpincfile includes include
2017
2018MODPROBE_CONF=/etc/modprobe.conf
2019mpincfile=$1
2020touch $mpincfile
2021if [ -a $MODPROBE_CONF ]; then
2022    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2023    if [ -n "$includes" ]; then
2024        for include in $includes
2025        do
2026            if [ -a "$include" ]; then
2027                echo $include >> $mpincfile
2028            fi
2029        done
2030    fi
2031fi
2032}
2033
2034
2035PrepareDataDiskImages() {
2036    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2037
2038    imagesdir=$MINDI_CACHE
2039    rm -f $imagesdir/mindi.iso
2040    needlist=$MINDI_TMP/what-we-need.txt
2041    bigdir=$MINDI_TMP/bigdir
2042    mkdir -p $bigdir/usr/bin
2043    mkdir -p $bigdir/usr/sbin
2044    includefile=$MINDI_TMP/$$.includefile.txt
2045
2046    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2047    if [ -e "$DEPLIST_FILE" ]; then
2048        lfiles="$DEPLIST_FILE $lfiles"
2049    fi
2050    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2051    ParseModprobeForIncludes $includefile
2052    lines=$(($lines+`cat $includefile | wc -l`))
2053    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2054    res=$?
2055    rm -f $includefile
2056    ListKernelModulePaths >> $needlist
2057    if [ "$res" -ne "0" ] ; then
2058        Die "You have $res files present in dependency list\nbut absent from filesystem."
2059    fi
2060    mkdir -p $bigdir/tmp
2061    if [ _"$MONDO_SHARE" != _"" ]; then
2062        # BCO: no reason to have the cfg file stored twice
2063        MakeMondoConfigFile $MINDI_TMP/$MRCFG
2064        cp -f $MINDI_TMP/$MRCFG $bigdir/tmp &> /dev/null
2065    fi
2066
2067    # Needs to be done after the MRCFG creation
2068    FindAndAddUserKeyboardMappingFile
2069
2070    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2071    DropOptimizedLibraries $needlist $bigdir
2072    echo -en "Assembling dependency files"
2073
2074    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2075
2076    # also copy io.sys and msdos.sys, if we can find them
2077    for i in `mount | cut -d' ' -f3` ; do
2078        for j in io.sys msdos.sys ; do
2079            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2080        done
2081    done
2082
2083    # master boot record, too
2084    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2085    if [ "$i" ] ; then
2086        LogAll "INFO: Backing up $i's MBR"
2087        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2088        sleep 1
2089        sync
2090        j=$i
2091        [ -h "$j" ] && j=`readlink -f $j`
2092        LogAll "INFO: Creating /dev/boot_device ($j)"
2093        mkdir -p $bigdir/dev
2094        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2095    fi
2096
2097    old_pwd=`pwd`
2098    cd "$bigdir"
2099
2100    # Get terminfo content
2101    ti="usr/share/terminfo/l"
2102    if [ -d /$ti ]; then
2103        mkdir -p $ti
2104        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2105    fi
2106    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2107        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2108        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2109    fi
2110    if [ -d "/lib/dev-state" ]; then 
2111        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2112    fi
2113    cd "$old_pwd"
2114    echo -e "$DONE"
2115    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2116    MakeMountlist $MINDI_TMP/mountlist.txt
2117    CheckMountlist $MINDI_TMP/mountlist.txt
2118    mkdir -p $bigdir/tmp
2119    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2120    if [ _"$MONDO_SHARE" != _"" ]; then
2121        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2122    fi
2123    if [ $LVM != "false" ]; then
2124        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2125        if [ "$?" -ne "0" ]; then
2126            LVM="false"
2127            rm -f $bigdir/tmp/i-want-my-lvm
2128        else
2129            LogFile "Your i-want-my-lvm file content is:"
2130            LogFile "-----------------------------------"
2131            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2132            LogFile "-----------------------------------"
2133        fi
2134    fi
2135    LogFile "Your mountlist.txt file content is:"
2136    LogFile "-----------------------------------"
2137    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2138    LogFile "-----------------------------------"
2139
2140    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2141    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2142    if [ _"$MONDO_SHARE" != _"" ]; then
2143        for q in filelist.full.gz biggielist.txt ; do
2144            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2145            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2146        done
2147    fi
2148
2149    echo -en "Tarring and zipping the data content..."
2150    size_of_all_tools=`du -sk $bigdir | cut -f1`
2151    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2152    LogFile "Size of the data content"
2153    LogFile "------------------------"
2154    du -sk $imagesdir/*gz >> $LOGFILE
2155    LogFile "------------------------"
2156    echo -e "$DONE"
2157
2158    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2159    rm -rf $bigdir
2160    rm -f $needlist
2161}
2162
2163
2164Prompt() {
2165    echo -en "$1"
2166    read line
2167}
2168
2169
2170ReadLine() {
2171    local i incoming
2172    read incoming
2173    i=0
2174    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2175        i=$(($i+1))
2176        read incoming
2177    done
2178    echo "$incoming"
2179}
2180
2181
2182SizeOfPartition() {
2183    local devpath drive res stub
2184    device=$1
2185    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2186        Die "Cannot find $device's size - is your /etc/fstab sane?"
2187    fi
2188    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2189        res=`SizeOfRaidPartition $device`
2190        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2191        echo "$res"
2192        return 0
2193    fi
2194    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2195    res=`$FDISK -s $device 2>> $LOGFILE`
2196    # end patch
2197    # take only the first in case of multiple mount (cifs, nfs, ...)
2198    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2199    [ "$res" = "" ] && res="-1"
2200    echo $res
2201    return 0
2202}
2203
2204
2205SizeOfRaidPartition() {
2206    local real_dev smallest_size silly tmp
2207
2208    silly=999999999
2209    smallest_size=$silly
2210
2211    for real_dev in `GetRaidDevMembers $1` ; do
2212        tmp=`SizeOfPartition $real_dev`
2213        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2214    done
2215
2216    if [ "$smallest_size" = "$silly" ] ; then
2217        echo "-1"
2218        return 1
2219    else
2220        echo "$smallest_size"
2221        return 0
2222    fi
2223}
2224
2225
2226StripExecutable()
2227{
2228    local tmpfile
2229
2230    tmpfile=$MINDI_TMP/stripped.$$.dat
2231    [ -d "$1" ] || [ -h "$1" ] && return
2232    cp -f $1 $tmpfile 2>> $LOGFILE
2233    strip $tmpfile 2> /dev/null
2234    if [ "$?" -eq "0" ] ; then
2235        cp -f $tmpfile $1 2>> $LOGFILE
2236        LogFile "INFO: Stripped binary $2"
2237    fi
2238    rm -f $tmpfile
2239}
2240
2241KernelVer() {
2242        local fkern_ver fname
2243
2244        fname=$1
2245        file $fname | grep -q gzip
2246        if [ "$?" -eq "0" ] ; then
2247            # Used by ia64
2248            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2249        else
2250            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2251        fi
2252        echo "$fkern_ver"
2253}
2254
2255
2256# WARNING: This function should just echo the final result !!!
2257#
2258TryToFindKernelPath() {
2259    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2260
2261    we_want_version=$KERVERRUN
2262    possible_kernels=""
2263    duff_kernels=""
2264    output=""
2265   
2266    if [ "$ARCH" = "ia64" ] ; then
2267       root="/boot/efi/efi"
2268    else
2269       root="/"
2270    fi
2271    # See if we're booted from a Xen kernel
2272    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2273    if [ -f /proc/xen/capabilities ]; then
2274        # It's a Xen kernel
2275        KERNEL_IS_XEN="yes"
2276        LogFile "INFO: It's a Xen kernel..."
2277    fi
2278
2279    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2280        [ ! -e "$fname" ] && continue
2281        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2282        fkern_ver=`KernelVer $fname`
2283        [ "$fkern_ver" = "" ] && continue
2284        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2285        [ -f "$fname" ] || continue
2286        [ -h "$fname" ] && continue
2287        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2288        file $fname | grep -q gzip
2289        if [ "$?" -eq "0" ] ; then
2290            # Used by ia64
2291            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2292                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2293                duff_kernels="$fname $duff_kernels"
2294            else
2295                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2296                possible_kernels="$fname $possible_kernels"
2297            fi
2298        else
2299            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2300                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2301                duff_kernels="$fname $duff_kernels"
2302            else
2303                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2304                possible_kernels="$fname $possible_kernels"
2305            fi
2306        fi
2307    done
2308    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2309        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2310    fi
2311    if [ ! "$possible_kernels" ] ; then
2312        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2313        possible_kernels="$duff_kernels"
2314        if [ ! "$possible_kernels" ] ; then
2315            LogAll "INFO: Sorry, no duff kernels either"
2316        else
2317            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2318            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2319        fi
2320    fi
2321    if [ $KERNEL_IS_XEN = "yes" ]; then
2322        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2323        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2324    fi
2325    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2326    noof_kernels=`CountItemsIn "$possible_kernels"`
2327    if [ "$noof_kernels" -eq "0" ] ; then
2328        LogAll "Could not find your kernel."
2329        if [ -e "/boot/vmlinuz" ] ; then
2330            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2331            output=/boot/vmlinuz
2332        else
2333            output=""
2334        fi
2335    elif [ "$noof_kernels" -eq "1" ] ; then
2336        kp=`echo "$possible_kernels" | sed s/' '//`
2337        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2338        output="$kp"
2339    else
2340        for i in $possible_kernels ; do
2341            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2342                LogAll "INFO: OK, I used my initiative and found that "
2343                LogAll "INFO: $i is probably your kernel. "
2344                output="$i"
2345                break
2346            fi
2347        done
2348        if [ ! -n "$output" ]; then
2349            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2350                output=/boot/vmlinuz
2351                LogFile "INFO: Schlomo, this one's for you."
2352            else
2353                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2354                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2355                LogFile "INFO: $possible_kernels"
2356                output=""
2357            fi
2358        fi
2359    fi
2360    if [ $KERNEL_IS_XEN = "yes" ]; then
2361        if [ "$noof_xenkernels" -eq "0" ]; then
2362            xenkernelpath=""
2363        elif [ "$noof_xenkernels" -eq "1" ]; then
2364            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2365            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2366        else
2367            for i in $possible_xenkernels ; do
2368                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2369                    LogFile "INFO: OK, I used my initiative and found that "
2370                    LogFile "INFO: $i is probably your Xen kernel. "
2371                    xenkernelpath="$i"
2372                    break
2373                fi
2374            done
2375            if [ ! -n "$xenkernelpath" ]; then
2376                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2377                if [ ! -n "$new_possible_xenkernels" ]; then
2378                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2379                    LogFile "INFO: Using $xenkernelpath"
2380                else
2381                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2382                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2383                    LogFile "INFO: $possible_xenkernels"
2384                    output=""
2385                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2386                    LogFile "INFO: Using $xenkernelpath"
2387                fi
2388            fi
2389        fi
2390        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2391            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2392        fi
2393    fi
2394    LogAll "TryToFindKernelPath found $output"
2395    echo "$output"
2396}
2397
2398
2399TurnTgzIntoRdz() {
2400    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2401
2402    tgz_dir_fname=$1
2403    rdz_fname=$2
2404    kernelsize=$3
2405    maxsize=$(($BOOT_SIZE-$kernelsize))
2406    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2407    tempfile=$MINDI_TMP/temp.rd
2408    res=0
2409    echo -en "..."
2410    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2411    echo -en "..."
2412    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2413    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2414    echo -en "..."
2415    mkdir -p $mountpoint
2416    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2417    echo -en "..."
2418    old_pwd=`pwd`
2419    cd "$mountpoint"
2420
2421    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2422    for d in bin sbin lib lib64; do
2423        if [ -h "/$d" ]; then
2424            thelink=`readlink /$d`
2425            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2426            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2427            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2428                rmdir $mountpoint/$d
2429            fi
2430            if [ ! -h $mountpoint/$d ]; then
2431                rm -f $mountpoint/$d 2> /dev/null
2432                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2433            fi
2434        fi
2435    done
2436    LogFile "INFO: what is now in $mountpoint"
2437    ls -alR $mountpoint >> $LOGFILE
2438   
2439    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2440    for f in $tgz_dir_fname/*; do 
2441        if [ ! -r $f ]; then
2442            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2443        else
2444            cp -Rdf $f . 2>&1 >> $LOGFILE
2445        fi
2446    done
2447    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2448    ln -sf usr/sbin/init linuxrc
2449
2450    cd dev || Die "Can't cd to dev"
2451    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2452    rm -f dev-entries.tgz
2453    cd ..
2454
2455    for w in insmod.static insmod.static.old ; do
2456        s=`which $w 2> /dev/null`
2457        if [ -e "$s" ] ; then
2458            tar cf - -C / $s 2> /dev/null | tar xf -
2459        fi
2460    done
2461
2462    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2463   
2464    # Copy of files mandatory for ssh to automate mount if sshfs is used
2465    mkdir $mountpoint/.ssh $mountpoint/tmp
2466    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2467    cat > $mountpoint/tmp/myssh << EOF
2468ssh -o StrictHostKeyChecking=no $*
2469EOF
2470    chmod 755 $mountpoint/tmp/myssh
2471
2472    # Copy of files mandatory for ld.so
2473    cp -a /etc/ld.so.c* $mountpoint/etc
2474
2475    # Handle the case where busybox and mount are dynamically linked
2476    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2477    if [ $? -eq 0 ]; then
2478        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2479        rm -f bin/mount
2480    fi
2481
2482    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2483    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2484    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2485        if [ -d $f ]; then
2486            for g in `find $f`; do 
2487                echo $g >> $MINDI_TMP/minimal.lis
2488                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2489            done
2490        else 
2491            if [ -r $f ]; then
2492                echo $f >> $MINDI_TMP/minimal.lis
2493                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2494            fi
2495        fi
2496    done
2497    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2498        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2499    done
2500    # Initial / are trucated by tar
2501    finallist=""
2502    # Remove directories from the list, as tar/cp will create them anyway
2503    # and it may hurt if /lib is in it as on Debian/Ubuntu
2504    # recent bash says that -d is true for a link to a dir !
2505    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2506        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2507            finallist="$finallist $f"
2508        fi
2509    done
2510    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2511    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2512    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2513
2514    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2515    ln -sf /bin/bash bin/sh
2516    LogIt "INFO: Using bash as default shell"
2517    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2518
2519    # Avoids an issue on some distro (RHEL5)
2520    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2521
2522    mkdir -p $mountpoint/tmp
2523    # Management of udev (which includes modprobe in rules)
2524    ps auxww | grep -v grep | grep -qw udevd
2525    if [ $? -eq 0 ]; then
2526        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2527        LogIt "INFO: udev device manager found"
2528        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2529        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2530        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2531        # Do not do it if it's a link (Ubuntu 64 bits #503)
2532        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2533            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2534        fi
2535        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2536            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2537        fi
2538        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2539            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2540        fi
2541        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2542            tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2543        fi
2544        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2545            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2546            lis=""
2547            # Get only the files which exist in that list
2548            # and potentially their symlink structure
2549            for i in $lis2; do
2550                if [ -h $i ]; then
2551                    j=$i
2552                    while [ -h $j ]; do
2553                        lis="$lis $j"
2554                        j=`readlink -f $j`
2555                    done
2556                    lis="$lis $j"
2557                elif [ -f $i ]; then
2558                    lis="$lis $i"
2559                fi
2560            done
2561            # And their deps
2562            LocateDeps $lis > $MINDI_TMP/udev.lis
2563            for i in $lis; do
2564                if [ "`echo $i | cut -c1`" = "/" ]; then
2565                    j=`echo $i | cut -c2-`
2566                    [ "$j" != "" ] && rm -f $j
2567                fi
2568                echo "$i" >> $MINDI_TMP/udev.lis
2569            done
2570            finallist=""
2571            # Remove directories from the list, as tar/cp will create them anyway
2572            # and it may hurt if /lib is in it as on Debian/Ubuntu
2573            # recent bash says that -d is true for a link to a dir !
2574            for f in `sort -u $MINDI_TMP/udev.lis`; do
2575                if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2576                    finallist="$finallist $f"
2577                fi
2578            done
2579            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2580            echo "cp -a -n --parents $finallist -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2581            cp -a -n --parents $finallist -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2582            rm -f $MINDI_TMP/udev.lis
2583        else
2584            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2585            LogAll "         mindi will use static devices which may cause problems"
2586            rm -f $mountpoint/tmp/USE-UDEV
2587        fi
2588    fi
2589
2590    # Management of potential HW info (ProLiant only at the moment)
2591    rm -rf $MINDI_CACHE/bkphw
2592    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2593    if [ -d $MINDI_CACHE/bkphw ]; then
2594        LogIt "INFO: Hardware Information found and saved ..."
2595        cp -rp $MINDI_CACHE/bkphw .
2596        if [ -f $MINDI_CACHE/tools.files ]; then
2597            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2598            LocateDeps $lis > $MINDI_TMP/tools.lis
2599            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2600        fi
2601        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2602            mv -f $MINDI_CACHE/mindi-rsthw .
2603            chmod 755 ./mindi-rsthw
2604        fi
2605        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2606    fi
2607
2608    # Management of perl scripts delivered needed at restore time
2609    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2610    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2611
2612    for w in cdrom groovy-stuff ; do
2613        mkdir -p mnt/$w
2614    done
2615
2616    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2617
2618    echo -en "..."
2619    cd /
2620
2621    needed_modules=""
2622    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2623
2624    if [ -e "$MINDI_TMP/NETFS-SERVER-MOUNT" ] ; then
2625        # For PXE boot
2626        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2627    fi
2628    for i in $DENY_MODS; do
2629        LogFile "INFO: Removing $i from the list of modules to load"
2630        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2631    done
2632
2633    if [ "${kernelname}" != "" ]; then
2634        needed_modules_path=lib/modules/${kernelname}
2635        mkgmopt="-k ${kernelname}"
2636    else
2637        needed_modules_path=lib/modules/$KERVERRUN
2638        mkgmopt="-k $KERVERRUN"
2639    fi
2640
2641    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2642    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2643
2644    LogFile "INFO: Adding $needed_modules to the rootfs with $mkgmopt"
2645    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2646
2647    # Uncompress modules if not using udev and native modprobe
2648    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2649        for i in $needed_modules; do
2650            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2651                gunzip -f $mountpoint/$i
2652            fi
2653            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2654                bunzip2 -f $mountpoint/$i
2655            fi
2656            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2657                unxz -f $mountpoint/$i
2658            fi
2659            LogFile "INFO: Uncompressing $i"
2660        done
2661    fi
2662
2663    # Also copy modules.* in case of udev so that normal modprobe works
2664    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2665
2666    # Copy FW in case some drivers needs it
2667    for d in "/lib" "/usr/lib"; do
2668        if [ -d "$d/firmware" -a ! -h $d ]; then
2669            cp -a "$d/firmware" "$mountpoint/$d"
2670        fi
2671    done
2672
2673    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2674    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2675        if [ -d "$d/multipath" -a ! -h $d ]; then
2676            cp -a "$d/multipath" "$mountpoint/$d"
2677        fi
2678    done
2679
2680    # Copy an additional ProLiant tool for OBDR support
2681    if [ -f $MINDI_TMP/OBDR ]; then
2682        found=0
2683        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2684            mkdir -p $mountpoint/usr/bin
2685            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2686            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2687            found=1
2688        fi
2689        if [ -x /usr/bin/sg_wr_mode ]; then
2690            mkdir -p $mountpoint/usr/bin
2691            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2692            LocateDeps $lis > $MINDI_TMP/obdr.lis
2693            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2694            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2695            found=1
2696        fi
2697        if [ $found -eq 0 ]; then
2698            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2699            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2700        fi
2701    fi
2702
2703    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2704        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2705        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2706        rm -f $mountpoint/sbin/devfsd
2707    fi
2708    cd "$old_pwd"
2709    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2710    if [ _"$MONDO_SHARE" != _"" ]; then
2711        MakeMondoConfigFile $mountpoint/tmp/$MRCFG
2712        cp -f $mountpoint/tmp/$MRCFG $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy $MRCFG to ramdisk"
2713        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2714        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2715        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2716    fi
2717
2718    # Create module list to load at restore time
2719    rm -f $mountpoint/tmp/modules
2720    for m in $CDROM_MODS; do
2721        echo $m >> $mountpoint/tmp/modules
2722    done
2723
2724    mkdir -p $mountpoint/proc
2725    LogFile "---------------------------"
2726    LogFile "Content of initial ramdisk:"
2727    LogFile "---------------------------"
2728    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2729    LogFile "---------------------------"
2730
2731    # Determine what filesystem to use for initrd image
2732    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2733    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2734    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2735    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2736        # say what will be used
2737        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2738        # kernel expects linuxrc in ext2 filesystem
2739        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2740        # unmount loop filesystem and create image file using the standard approach
2741        umount $mountpoint || Die "Cannot unmount $tempfile"
2742        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2743        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2744            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2745        else
2746            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2747        fi
2748        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2749        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2750        rm -f ${rdz_fname}.tmp
2751        # log that we are done
2752        LogFile "      ...done."
2753    elif [ "$gvFileSystem" = "initramfs" ]; then
2754        # say what will be used
2755        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2756        # make sure that cpio is there
2757        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2758        # go into filesystem
2759        cd "$mountpoint"
2760        # kernel expects init in cpio filesystem
2761        ln -sf sbin/init init
2762        # create cpio image file and unmount loop filesystem
2763        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2764        cd "$old_pwd"
2765        umount $mountpoint || Die "Cannot unmount $tempfile"
2766        # log that we are done
2767        LogFile "      ...done."
2768    else
2769        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2770    fi
2771
2772    if [ "$res" -eq "0" ] ; then
2773        echo -en "..."
2774    else
2775        echo -en "\rMade an rdz WITH ERRORS.           \n"
2776    fi
2777    return 0
2778}
2779
2780
2781##############################################################################
2782#----------------------------------- Main -----------------------------------#
2783##############################################################################
2784
2785# Now we can create what we need
2786mkdir -p $MINDI_TMP
2787
2788# Purge from potential old run
2789if [ _"$MINDI_CACHE" = _"" ]; then
2790    Die "MINDI_CACHE undefined"
2791fi
2792
2793# --nolog needs to be first, and is used in analyze-my-lvm
2794if [ "$1" = "--nolog" ] ; then
2795    shift
2796    LOGFILE=/dev/stderr
2797else
2798    > $LOGFILE
2799fi
2800if [ "$1" = "--printvar" ] ; then
2801    shift
2802    if [ _"$1" != _"" ] ; then
2803        set | grep -Ew "^$1" | cut -d= -f2
2804    fi
2805    exit 0
2806fi
2807
2808LogFile "mindi v$MINDI_VERSION"
2809LogFile "$ARCH architecture detected"
2810LogFile "mindi called with the following arguments:"
2811echo "$@">> $LOGFILE
2812LogFile "Start date : `date`"
2813LogFile "-----------------------------"
2814
2815[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2816
2817# Log some capital variables
2818[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2819[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2820LogFile "MONDO_SHARE = $MONDO_SHARE"
2821LogFile "MINDI_LIB = $MINDI_LIB"
2822LogFile "MINDI_SBIN = $MINDI_SBIN"
2823LogFile "MINDI_CONF = $MINDI_CONF"
2824if [ -f $MINDI_CONFIG ]; then
2825    LogFile "-----------------------------"
2826    LogFile " Mindi configuration file    "
2827    LogFile "-----------------------------"
2828    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2829    LogFile "-----------------------------"
2830fi
2831LogFile "In Mindi"
2832LogFile "--------"
2833LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2834LogFile "BOOT_SIZE = $BOOT_SIZE"
2835LogFile "--------"
2836
2837trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2838
2839# Sanity checks
2840which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2841which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2842which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2843which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2844if which awk &> /dev/null ; then
2845    if ! which gawk &> /dev/null ; then
2846        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2847    fi
2848fi
2849which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2850[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2851
2852[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2853
2854# Update the PATH variable if incomplete
2855if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2856    PATH=$PATH:/sbin:/usr/sbin
2857    export PATH
2858    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2859    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2860    LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
2861fi
2862
2863if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2864    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2865fi
2866
2867### TODO
2868### Fix as it's not mandatory on ia64
2869if [ "$ARCH" = "ia64" ] ; then
2870    if which elilo &> /dev/null ; then
2871        LILO_EXE=elilo
2872    else
2873        LILO_EXE=`which false 2> /dev/null`
2874    fi
2875else
2876    FindIsolinuxBinary
2877fi
2878trap "Aborted" SIGTERM
2879DONE="\r\t\t\t\t\t\t\t\tDone.         "
2880kernelpath=""
2881MONDO_ROOT=/var/cache/mondo
2882mkdir -p $MONDO_ROOT
2883
2884if [ -d "/proc/lvm" ]; then
2885    # LVM v1
2886    LVMCMD=""
2887    LVM="v1"
2888elif [ -d "/dev/mapper" ]; then
2889    # LVM v2
2890    LVMCMD="lvm"
2891    LVM="v2"
2892else
2893    LVM="false"
2894fi
2895
2896if [ -e "/proc/cmdline" ]; then
2897    CMDLINE="/proc/cmdline"
2898elif [ -e "/tmp/cmdline" ]; then
2899    CMDLINE="/tmp/cmdline"
2900else
2901    CMDLINE="/dev/null"
2902fi
2903
2904LogFile "INFO: LVM set to $LVM"
2905LogFile "----------"
2906LogFile "mount result:"
2907LogFile "-------------"
2908mount >> $LOGFILE
2909if [ -e /etc/raidtab ]; then
2910    LogFile "-------------"
2911    LogFile "/etc/raidtab content:"
2912    LogFile "-------------"
2913    cat /etc/raidtab >> $LOGFILE
2914else
2915    LogFile "No file /etc/raidtab"
2916fi
2917if [ -e /etc/mdadm.conf ]; then
2918    LogFile "-------------"
2919    LogFile "/etc/mdadm.conf content:"
2920    LogFile "-------------"
2921    cat /etc/mdadm.conf >> $LOGFILE
2922else
2923    LogFile "-------------"
2924    LogFile "No file /etc/mdadm.conf"
2925fi
2926LogFile "-------------"
2927LogFile "cat $CMDLINE"
2928LogFile "-------------"
2929cat $CMDLINE >> $LOGFILE
2930LogFile "-------------"
2931LogFile "cat /proc/swaps:"
2932LogFile "-------------"
2933cat /proc/swaps >> $LOGFILE
2934LogFile "-------------"
2935if [ -e /proc/mdstat ]; then
2936    LogFile "cat /proc/mdstat:"
2937    LogFile "-------------"
2938    cat /proc/mdstat >> $LOGFILE
2939else
2940    LogFile "No pseudo file /proc/mdstat"
2941fi
2942LogFile "-------------"
2943LogFile "cat /proc/partitions:"
2944LogFile "-------------"
2945cat /proc/partitions >> $LOGFILE
2946LogFile "-------------"
2947LogFile "cat /proc/filesystems:"
2948LogFile "-------------"
2949cat /proc/filesystems >> $LOGFILE
2950LogFile "-------------"
2951LogFile "lsmod result:"
2952LogFile "-------------"
2953lsmod >> $LOGFILE
2954MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2955if [ -x /usr/sbin/esxcfg-module ]; then
2956    LogFile "-------------"
2957    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2958    LogFile "-------------"
2959    LogFile "VMWare modules"
2960    LogFile "-------------"
2961    /usr/sbin/esxcfg-module -l >> $LOGFILE
2962    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2963fi
2964LogFile "-------------" 
2965LogFile "FORCE_MODS:"
2966LogFile "-------------"
2967LogFile "$FORCE_MODS"
2968LogFile "-------------"
2969LogFile "DENY_MODS:"
2970LogFile "-------------"
2971LogFile "$DENY_MODS"
2972LogFile "-------------"
2973LogFile "df result:"
2974LogFile "----------"
2975df -aT >> $LOGFILE
2976LogFile "-------------"
2977LogFile "df -i result:"
2978LogFile "----------"
2979df -i >> $LOGFILE
2980LogFile "-------------"
2981if [ -r /boot/grub/menu.lst ]; then
2982    LogFile "-------------"
2983    LogFile "INFO: /boot/grub/menu.lst content"
2984    LogFile "-------------"
2985    cat /boot/grub/menu.lst >> $LOGFILE
2986    LogFile "-------------"
2987fi
2988if [ -r /boot/grub/grub.conf ]; then
2989    LogFile "-------------"
2990    LogFile "INFO: /boot/grub/grub.conf content"
2991    LogFile "-------------"
2992    cat /boot/grub/grub.conf >> $LOGFILE
2993    LogFile "-------------"
2994fi
2995if [ -r /boot/grub/grub.cfg ]; then
2996    LogFile "-------------"
2997    LogFile "INFO: /boot/grub/grub.cfg content"
2998    LogFile "-------------"
2999    cat /boot/grub/grub.cfg >> $LOGFILE
3000    LogFile "-------------"
3001fi
3002if [ -r /boot/grub/device.map ]; then
3003    LogFile "-------------"
3004    LogFile "INFO: /boot/grub/device.map content"
3005    LogFile "-------------"
3006    cat /boot/grub/device.map >> $LOGFILE
3007    LogFile "-------------"
3008fi
3009if [ -r /etc/lilo.conf ]; then
3010    LogFile "-------------"
3011    LogFile "INFO: /etc/lilo.conf content"
3012    LogFile "-------------"
3013    cat /etc/lilo.conf >> $LOGFILE
3014fi
3015LogFile "Full fdisk info"
3016LogFile "---------------"
3017$FDISK -l >> $LOGFILE
3018LogFile "----------------"
3019
3020# Compute libata version
3021laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3022# If libata v2 is used then remove ide-generic as it will perturbate boot
3023if [ "`echo $MODULES | grep libata`" ]; then
3024    if [ "$laver" = "2" ]; then
3025        DENY_MODS="$DENY_MODS ide-generic"
3026        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3027        LogFile "-------------"
3028    fi
3029fi
3030
3031# Check for McAfee which disturbs the access to some files (tgz in articular)
3032if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3033    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3034    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3035    LogFile "WARNING: You have two options:"
3036    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3037    LogFile "WARNING:  - Disable the scanner during the backup"
3038fi
3039
3040# Check for ISO_CMD command
3041if [ ! -x $ISO_CMD ]; then
3042    LogFile "NOTE: No CD image (ISO file) utility found"
3043fi
3044
3045FLOPPY_WAS_MOUNTED=""
3046for mtpt in /media/floppy /mnt/floppy /floppy ; do
3047    if mount | grep -w $mtpt &> /dev/null ; then
3048        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3049        umount $mtpt
3050    fi
3051done
3052
3053#
3054# If we have a USB device we need to store info
3055# and remove it from the parameters line
3056#
3057if [ "$#" -ne "0" ] ; then
3058    if [ "$1" = "--usb" ] ; then
3059        shift
3060        USBDEVICE=$1
3061        if [ _"$USBDEVICE" = _"" ]; then
3062            Die "No USB device specified"
3063        fi
3064        shift
3065    fi
3066fi
3067
3068if [ "$#" -ne "0" ] ; then
3069    if [ "$1" = "--findkernel" ] ; then
3070        resk=`TryToFindKernelPath`
3071        # Avoids logfile content for mondo
3072        export MONDO_SHARE=""
3073        if [ "$resk" = "" ] ; then
3074            if [ $KERNEL_IS_XEN = "yes" ]; then
3075                echo "$xenkernelpath"
3076                LogFile "INFO: xenkernelpath = $xenkernelpath"
3077                MindiExit 0
3078            else
3079                MindiExit -1
3080            fi
3081        else
3082            echo "$resk"
3083            LogFile "INFO: kernelpath = $resk"
3084            MindiExit 0
3085        fi
3086    elif [ "$1" = "--locatedeps" ] ; then
3087        [ ! "$2" ] && Die "Please specify the binary to look at"
3088        LocateDeps $*
3089        # Avoids logfile content for mondo
3090        export MONDO_SHARE=""
3091        MindiExit $?
3092    elif [ "$1" = "--readalllink" ] ; then
3093        [ ! "$2" ] && Die "Please specify the binary to look at"
3094        # Avoids logfile content for mondo
3095        export MONDO_SHARE=""
3096        mr-read-all-link $2
3097        MindiExit $?
3098    elif [ "$1" = "--makemessage" ] ; then
3099        MakeMessageFile | cut -c1-80
3100        MindiExit 0
3101    elif [ "$1" = "--makemountlist" ] ; then
3102        [ ! "$2" ] && Die "Please specify the output file"
3103        MakeMountlist $2
3104        CheckMountlist $2
3105        # Avoids logfile content for mondo
3106        export MONDO_SHARE=""
3107        MindiExit $?
3108    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3109        echo "Mindi v$MINDI_VERSION"
3110        # Avoids logfile content for mondo
3111        export MONDO_SHARE=""
3112        MindiExit 0
3113    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3114        MONDO_TMP=$2
3115        # Change MINDI_TMP for the one provided by mondo
3116        # So that it can get back the built files
3117        if [ _"$MONDO_TMP" = _"" ]; then
3118            Die "MONDO_TMP is empty, aborting"
3119        fi
3120        if [ _"$MONDO_TMP" = _"/" ]; then
3121            Die "MONDO_TMP is /, aborting"
3122        fi
3123        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3124        rmdir $MINDI_TMP
3125        export MINDI_TMP=$MONDO_TMP
3126        mkdir -p $MINDI_TMP
3127
3128        # This is the scratch dir in mondo - subdir images
3129        MINDI_CACHE=$3
3130
3131        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3132        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3133       
3134###
3135### Sq-Modification...
3136### Attempt to locate kernel specific module path
3137### if module path is found then use it other wise use uname -r to set it...
3138###
3139        if [ $KERNEL_IS_XEN = "yes" ]; then
3140            LogAll "INFO: xenkernelpath = $xenkernelpath"
3141        fi
3142        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3143        if [ ! -d "/lib/modules/$kernelname" ]; then
3144           LogAll "WARNING: Module path for ${kernelpath} not found..."
3145           LogAll "         using running kernel\'s modules."
3146           kernelname=$KERVERRUN
3147        else
3148           LogAll "Using modules for kernel: ${kernelname}"
3149        fi
3150        LogAll "INFO: kernelname = $kernelname"
3151        LogAll "INFO: kernelpath = $kernelpath"
3152###
3153### end of Sq-Modification
3154###
3155        TAPEDEV=$5
3156        TAPESIZE=$6
3157        FILES_IN_FILELIST=$7
3158        USE_LZO=$8
3159        CDRECOVERY=$9
3160        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3161            IMAGE_DEVS=""
3162        else
3163            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3164        fi
3165        if [ "${11}" ] ; then
3166            LILO_OPTIONS=""
3167    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3168        fi
3169        LAST_FILELIST_NUMBER=${12}
3170        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3171        export MINDI_EXCLUDE_DEVS="${14}"
3172        USE_COMP="${15}"
3173        USE_LILO="${16}"
3174        USE_STAR="${17}"
3175        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3176        DIFFERENTIAL="${19}"
3177        USE_GZIP="${20}"
3178        NOT_BOOT="${21}"
3179        [ "$USE_COMP" = "" ] && USE_COMP=yes
3180        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3181        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3182        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3183        # MONDO_ROOT is the real scratchdir
3184        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3185        if [ _"$MONDO_ROOT" != _"" ]; then
3186            mkdir -p $MONDO_ROOT
3187        else
3188            Die "MONDO_ROOT is undefined"
3189        fi
3190    else
3191        LogScreen "Syntax: mindi (--custom ....)"
3192        MindiExit -1
3193    fi
3194fi
3195
3196if [ _"$MINDI_CACHE" != _"" ]; then
3197    rm -rf $MINDI_CACHE/* 2> /dev/null
3198    mkdir -p $MINDI_CACHE
3199fi
3200
3201[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3202
3203if [ _"$MONDO_SHARE" = _"" ]; then
3204    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3205    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3206    LogIt "BusyBox sources are available from http://www.busybox.net"
3207    LogIt "------------------------------------------------------------------------------"
3208else
3209    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3210fi
3211if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3212    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3213else
3214    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3215    MindiExit -1
3216fi
3217
3218for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3219    modinfo $i 2> /dev/null 1> /dev/null
3220    if [ $? -eq 0 ]; then
3221        modprobe $i 2>&1 > /dev/null
3222    fi
3223done
3224
3225KERN_DISK_MADE=""
3226
3227LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3228LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3229LogFile "NOT_BOOT = '$NOT_BOOT'"
3230if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3231    LogIt "INFO: Just creating $MRCFG and a small all.tar.gz for Mondo. Nothing else."
3232    MakeMondoConfigFile $MINDI_TMP/$MRCFG
3233    MakeMountlist $MINDI_TMP/mountlist.txt
3234    CheckMountlist $MINDI_TMP/mountlist.txt
3235    mkdir -p $MINDI_TMP/small-all/tmp
3236    cd "$MINDI_TMP/small-all"
3237    cp -f $MINDI_TMP/{mountlist.txt,$MRCFG,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3238    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3239    sleep 2
3240    LogIt "Done. Exiting."
3241    MindiExit 0
3242fi
3243
3244if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3245    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3246fi
3247
3248if [ "$kernelpath" = "" ] ; then
3249    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3250    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3251    read ch
3252    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3253        USE_OWN_KERNEL="yes"
3254    else
3255        USE_OWN_KERNEL="no"
3256    fi
3257    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3258        kernelpath=`TryToFindKernelPath`
3259        if [ "$kernelpath" = "" ] ; then
3260            echo -n "Please enter kernel path : "
3261            read kernelpath
3262        fi
3263    fi
3264fi
3265
3266echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3267[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3268
3269mountpoint=$MINDI_TMP/mountpoint.$$
3270PrepareDataDiskImages
3271
3272ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3273rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3274export ramdisk_size=$rds
3275
3276LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3277if [ "$ARCH" = "ia64" ] ; then
3278    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3279else
3280    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3281fi
3282
3283[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3284...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3285
3286if [ _"$MONDO_SHARE" = _"" ]; then
3287    ListImagesForUser
3288    OfferToMakeBootableISO
3289    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3290        OfferToMakeBootableUSB
3291    fi
3292    LogAll "Finished."
3293elif [ "$TAPEDEV" ] ; then
3294    if [ "$ARCH" != "ia64" ] ; then
3295        # We need to keep the img file as boot file for ia64 platform
3296        rm -f $MINDI_CACHE/{*img,*iso}
3297    else
3298        rm -f $MINDI_CACHE/*iso
3299    fi
3300    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3301        OfferToMakeBootableUSB
3302    fi
3303    OfferToMakeBootableISO
3304    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3305        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3306    else
3307        Die "Cannot find all.tar.gz, to be written to tape"
3308    fi
3309elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3310    OfferToMakeBootableUSB
3311else
3312    OfferToMakeBootableISO
3313fi
3314# cleanup
3315LogAll "INFO: $FRIENDLY_OUTSTRING"
3316for mtpt in $FLOPPY_WAS_MOUNTED ; do
3317    mount $mtpt
3318done
3319MindiExit 0
Note: See TracBrowser for help on using the repository browser.