source: branches/3.2/mindi/mindi @ 3253

Last change on this file since 3253 was 3253, checked in by bruno, 6 years ago
  • mindo now uses mr-kernel-get-modules for automatic dependency analysis
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 121.7 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3253 2014-02-27 02:48:28Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 uio isp megaraid megaraid_mbox megaraid_sas mega_sr mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod sd_mod seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs edd paride ata_generic ata_piix dock via82cxxx generic nvidia ahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw virtio"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb_storage usb-ohci usb-uhci input hid uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="nfs loop mii 3c59x e100 bcm5700 cnic be2net bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse netbk xenblktap r8169 virtio_net via_rhine ipv6 ptp"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS cdrom isocd isofs sg sr_mod iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod lvm-mod dm-mod dm_mod dm-multipath dm-emc dm-hp-sw dm-rdac dm-region-hash multipath jfs xfs btrfs reiserfs ext2 ext3 minix nfs nfsd ext4 ocfs2 configfs vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
258    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
259        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
260    else
261        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
262    fi
263    for included_item in $included_list ; do
264        if [ ! -e "$included_item" ] ; then
265            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
266            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
267            for ii in $sss ; do
268                [ -e "$ii" ] && AddKeyboardMappingFile $ii
269            done
270        else
271            AddKeyboardMappingFile $included_item
272        fi
273    done
274}
275
276
277CopyDependenciesToDirectory() {
278    local outdir incoming counter d found tdir
279    outdir=$1
280    mkdir -p $outdir
281    incoming=`ReadLine`
282    counter=0
283    while [ "$incoming" != "" ] ; do
284        # Non absolute file names should not arrive till here => skipped
285        if [ `echo "$incoming" | cut -c1` != '/' ]; then
286            LogAll "WARNING: Unable to handle $incoming"
287            incoming=`ReadLine`
288            continue
289        fi
290        # no parent directory of incoming should be a link, copy is not possible in that case
291        d=`dirname "$incoming"`
292        found="false"
293        while [ $d != "/" -a $found = "false" ]; do
294            [ -h "$d" ] && found="true"
295            d=`dirname "$d"`
296        done
297        if [ -d "$incoming" -a ! -h "$incoming" ]; then
298            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
299        elif [ -e "$incoming" ] && [ $found = "false" ]; then
300            if [ ! -h "$incoming" ]; then
301                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302            else
303                tdir=`dirname "$incoming"`
304                if [ ! -e "$outdir/$tdir" ]; then
305                    mkdir -p "$outdir/$tdir"
306                fi
307                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
308            fi
309            # Only uncompress modules if not using udevd
310            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
311                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
312            fi
313            [ -x "$outdir" ] && StripExecutable $outdir
314            counter=$(($counter+1))
315            LogProgress $counter $2
316        fi
317        incoming=`ReadLine`
318    done
319}
320
321
322CountItemsIn() {
323    local r
324    r=0
325    for q in $1 ; do
326        r=$(($r+1))
327    done
328    echo $r
329}
330
331
332DropOptimizedLibraries() {
333    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
334    filelist=$1
335    outdir=$2
336
337    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
338    if [ "$list_of_optimized_libraries" = "" ] ; then
339        return 0
340    fi
341    echo -en "Dropping i686-optimized libraries if appropriate"
342    for optimized_lib_name in $list_of_optimized_libraries ; do
343        echo -en "."
344        reason=""
345        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
346        echo "$vanilla_lib_name" >> $filelist
347        LogFile "INFO: Adding $vanilla_lib_name to filelist"
348        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
349        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
350
351        # This may return multiple files
352        for resolved in `mr-read-all-link $vanilla_lib_name`; do
353            LogFile "INFO: Adding as deps $resolved to filelist"
354            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355            if [ "$vanilla_resolved_name" != "$resolved" ]; then
356                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
357                rmdir $outdir$resolved > /dev/null 2> /dev/null
358                ln -sf $vanilla_resolved_name $outdir$resolved
359                LogFile "INFO: Excluding deps $resolved" 
360                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
361                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
362                echo "$vanilla_resolved_name" >> $filelist.tmp
363                mv -f $filelist.tmp $filelist
364            fi
365        done
366    done
367    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
368    mv -f $filelist.tmp $filelist
369    echo -e "$DONE"
370}
371
372
373FindAndAddUserKeyboardMappingFile() {
374    local r res mapfile mappath included_item included_list keyfile mp locale
375    LogAll "INFO: Analyzing your keyboard's configuration."
376    KEYDIR=/usr/lib/kbd
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
383    if [ ! -e "$KEYDIR" ] ; then
384        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
385        return 0
386    fi
387    if [ -e "/etc/sysconfig/keyboard" ] ; then
388        LogFile "INFO: Red Hat-style config detected."
389        keyfile=/etc/sysconfig/keyboard
390    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
391        LogFile "INFO: Slackware-style config detected."
392        keyfile=/etc/rc.d/rc.keymap
393    elif [ -e "/etc/rc.config" ] ; then
394        LogFile "INFO: Debian-style config detected."
395        keyfile=/etc/rc.config
396    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        mkdir -p $bigdir/tmp
399        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
400        KBDEPTH=0
401        mkdir -p $bigdir/etc/console
402        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
403        echo ""
404        echo -e "$DONE"
405        return 0
406    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
407        LogFile "INFO: Ubuntu-style config detected."
408        mkdir -p $bigdir/tmp
409        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
410            kbdfile="/etc/console-setup/boottime.kmap.gz"
411        else
412            kbdfile="/etc/console-setup/cached.kmap.gz"
413        fi
414        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
415        KBDEPTH=0
416        mkdir -p $bigdir/etc/console-setup
417        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
418        echo ""
419        echo -e "$DONE"
420        return 0
421    elif [ -e "/etc/rc.conf" ] ; then
422        LogFile "INFO: ArchLinux config detected."
423        keyfile=/etc/rc.conf
424    elif [ -e "/etc/conf.d/keymaps" ] ; then
425        LogFile "INFO: Gentoo-style config detected."
426        keyfile=/etc/conf.d/keymaps
427    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
428        LogFile "INFO: X11-style config detected."
429        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
430    else
431        LogFile "Searching for rc.config ..."
432        keyfile=`find /etc -name rc.config | head -n1`
433        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
434            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
435            return
436        else
437            LogFile "INFO: Found $keyfile"
438        fi
439    fi
440    if [ ! -e "$KEYDIR/keymaps" ] ; then
441        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
442        return
443    fi
444    LogFile "INFO: keyfile=$keyfile"
445    # For SLES we need to remove the .map.gz extension Cf #614
446    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
447    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
448    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
449    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
450    LogFile "INFO: locale=$locale"
451    #
452    # Process the keymaps dir once for all
453    # AddKeyboardMappingFile will use it recursively
454    #
455    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
456    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
457    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
458    # If we have multiple keymaps then log it !!
459    echo "$mp" | grep -q " " >> $LOGFILE
460    if [ $? -eq 0 ]; then
461        LogAll "WARNING: Multiple keymaps found: $mp"
462        LogFile "INFO: The following one will be used"
463    fi
464    for i in $mp ; do
465        mappath=$i
466        [ -e "$i" ] && [ ! -d "$i" ] && break
467    done
468    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
469        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
470    fi
471    LogFile "INFO: mappath = $mappath"
472    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
473        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
474        return
475    fi
476    LogAll "INFO: Adding the following keyboard mapping tables: "
477    mkdir -p $bigdir/tmp
478    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
479    KBDEPTH=0
480    AddKeyboardMappingFile $mappath
481    echo ""
482    echo -e "$DONE"
483    rm -f $MINDI_TMP/keymaps.find
484    return 0
485}
486
487
488FindLdlinux32Binary() {
489    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
490    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
491    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
492    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
495    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
496    if [ ! -e "$LDLINUXC32" ]; then 
497        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
498        LDLINUXC32=/tmp/idoesnthopefullyexist
499    else
500        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
501    fi
502}
503
504
505FindMboot32Binary() {
506    MBOOTC32=/usr/lib/syslinux/mboot.c32
507    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
508    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
513    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
514    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
515}
516
517FindIsolinuxBinary() {
518    ISOLINUX=/usr/lib/isolinux.bin
519    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
520    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
525    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
526    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
527}
528
529
530GenerateGiantDependencyList() {
531    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
532
533    echo -en "Analyzing dependency requirements"
534    outfile=$1
535    tempfile=$MINDI_TMP/$$.txt
536    incoming=`ReadLine`
537
538    > $tempfile
539    progress=0
540    res=0
541    noof_lines=$2
542    while [ "$incoming" != "" ] ; do
543        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
544            incoming=`ReadLine`
545            continue
546        fi
547        if [ "$incoming" = "LVMFILES:" ] ; then
548            break
549        fi
550        filelist=`GenerateListForFile "$incoming"`
551        r=$?
552        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
553        res=$(($res+$r))
554#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
555        for fname in $filelist ; do
556                [ "$fname" != "" ] && echo "$fname" >> $tempfile
557        done
558        progress=$(($progress+1))
559        LogProgress $progress $noof_lines
560        incoming=`ReadLine`
561    done
562    if  [ "$incoming" = "LVMFILES:" ] ; then
563        incoming=`ReadLine`
564        lvmversion=""
565        while [ "$incoming" != "" ] ; do
566            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
567                incoming=`ReadLine`
568                continue
569            fi
570            filelist=`GenerateListForFile "$incoming"`
571            for tool in $filelist ; do
572                lvmresolved=`readlink -f $tool`
573                if [ "$tool" = "$lvmresolved" ]; then
574                    echo "$tool" >> $tempfile
575                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
576                    if [ "$lvmversion" = "" ] ; then
577                        lvmversion=`$lvmresolved`
578                        echo "$lvmresolved" >> $tempfile
579                    fi
580                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
581                    if [ "$lvmversion" = "200" ]; then
582                        # pvdata and lvmcreate_initrd don't exist in LVM2
583                        case "$toolstripped" in
584                        "pvdata")
585                            continue
586                            ;;
587                        "lvmcreate_initrd")
588                            continue
589                            ;;
590                        esac
591                    fi
592                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
593                    if [ -e "$toolpath" ] ; then
594                        echo "$toolpath" >> $tempfile
595                        echo "$tool" >> $tempfile
596                    else
597                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
598                    fi
599                    if [ -e "$toolpath" ] ; then
600                        echo "$toolpath" >> $tempfile
601                        echo "$tool" >> $tempfile
602                    else
603                        echo "Where are your LVM-Tools? Couldn't find $tool"
604                    fi
605                else
606                    echo "$tool" >> $tempfile
607                fi
608            done
609            progress=$(($progress+1))
610            LogProgress $progress $noof_lines
611            incoming=`ReadLine`
612        done
613    fi
614    echo -en "$DONE\nMaking complete dependency list"
615
616    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
617    mv -f $tempfile.new $tempfile
618    > $outfile.pre
619    progress=0
620    noof_lines=`cat $tempfile | wc -l`
621    LogFile "---------------------------------"
622    LogFile "List of dependencies:             "
623    LogFile "---------------------------------"
624    for fname in `cat $tempfile` ; do
625        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
626        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
627        progress=$(($progress+1))
628        LogProgress $progress $noof_lines
629    done
630    if [ _"$MONDO_SHARE" != _"" ]; then
631        mkdir -p $bigdir/tmp
632        mkdir -p $bigdir/usr/bin
633        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
634            LogAll "\nINFO: Incorporating post-nuke tarball"
635            old_pwd=`pwd`
636            cd "$bigdir"
637            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
638            cd "$old_pwd"
639        fi
640        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
641            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
642        else
643            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
644            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
645            LogIt "       If Mindi was called by Mondo then send me a bug report."
646            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
647            LogIt "       Finally, run Mindi again."
648            Die "Odd."
649        fi
650        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
651        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
652            LogAll "\nINFO: Incorporating Network-related settings"
653            for r in NETFS-* ISO-PREFIX ; do
654                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
655                LogFile "INFO: Copying $r to ramdisk"
656            done
657        fi
658    fi
659    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
660    rm -f $tempfile $outfile.pre
661    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
662    return $res
663}
664
665
666GenerateListForFile() {
667    local files_found loc fname incoming i res
668    incoming="$1"
669    files_found=""
670    res=0
671
672    for fname in $incoming ; do
673        files_found="$files_found `LocateFile $fname`"
674    done
675
676    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
677}
678
679
680# Returns all disk devices which are part of a raid array
681GetAllRaidMembers() {
682    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
683}
684
685
686GetFileSizeList() {
687    local i
688    for i in `find $1 -type d -o -print` ; do
689        du -sk $i
690    done
691}
692
693
694# Check kernel filesystem capabilites for accessing initrd image
695# Could be ext2 FS (old mode) or initramfs (new mode)
696#
697# Interface definition:
698# param #1: absolute path to kernel image
699GetInitrdFilesystemToUse() {
700
701    # interface test: make sure we have one parameter
702    if [ $# -ne 1 ]; then
703        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
704    fi
705
706    # interface parameters
707    local lvKernelImage=$1
708
709    # local constants (filesystem magic strings)
710    local lcMagicCramfs="<3>cramfs: wrong magic"
711    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
712    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
713    local lcMagicInitfs="<6>checking if image is initramfs...|[<]6[>]Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
714
715    # local variables
716    local lvOffset
717    local lvScanRes
718    local lvUseFilesystem
719
720    # say where we are.
721    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
722
723    # verify that file exists
724    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
725
726    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
727    file $lvKernelImage 2>&1 | grep -q gzip
728    if [ $? -eq 0 ]; then
729        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
730        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
731    else
732        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
733        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
734        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
735        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
736        if [ $lvOffset -eq 0 ]; then
737            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
738            lvScanRes=$lcMagicInitfs
739        else
740            lvOffset=`expr $lvOffset / 2`
741            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
742            # scan again  kernel image
743            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
744        fi
745    fi
746
747    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
748    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
749        lvUseFilesystem="ext2fs"
750    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
751        lvUseFilesystem="ext3fs"
752    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
753        lvUseFilesystem="initramfs"
754    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
755        lvUseFilesystem="cramfs"
756    else
757        # In that case, we are most probably after 2.6.30 and use the supported initramfs
758        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
759        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
760        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
761        lvUseFilesystem="initramfs"
762    fi
763
764    # say what we are using
765    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
766
767    # return file system to use
768    echo "$lvUseFilesystem"
769
770}
771
772# Searches members of raid device
773# $1: raid device (/dev/md...)
774GetRaidDevMembers() {
775    if [ ! -f /etc/raidtab ]; then 
776        return
777    fi
778    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
779}
780
781
782ListAllPartitions() {
783    local res currline partition all_partitions ap_orig remaining i j
784
785    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
786    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
787    if [ -e "/vmfs/volumes" ]; then
788        # For VMWare ESX 3 get the device names of these volumes
789        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
790    fi
791    return
792}
793
794
795ListImagesForUser() {
796    local path fname
797    path=$MINDI_CACHE
798    echo -en "In the directory '$path' you will find the images:-\n"
799    for fname in `ls $path | grep -F mindi-` ; do
800        printf "%19s " $fname
801    done
802    echo " "
803}
804
805
806ListKernelModulePaths() {
807    local module_list module fname r kern
808    module_list="$MODULES"
809    # Remove unwanted modules from list
810    for i in $DENY_MODS; do
811        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
812        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
813    done
814###
815### Sq-Modification ... Use kernelname for module search path if specified
816###
817    if [ "${kernelname}" != "" ]
818    then
819        kern=${kernelname}
820    else
821        kern="$KERVERRUN"
822    fi
823    export KERVER=$kern
824###
825### Sq-Mod End
826###
827    # Get rid of duplicates, so that if a live kernel module also appears
828    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
829    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
830        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
831        if [ -z "$r" ]; then
832            if [ "`echo "$MODULES" | grep -w $module`" ]; then
833                r="[live module file not found]"
834            else
835                r="[extra module file not found]"
836            fi
837        else
838            [ -f "$r" ] && echo "$r"
839        fi
840        LogFile "INFO: module $module --> $r"
841    done
842    find /lib/modules/$kern/modules.* -type f 2> /dev/null
843}
844
845#
846# Critical function which computes all dependencies (dyn. lib.)
847# for a list of binaries
848#
849LocateDeps() {
850    local incoming fname deps
851    incoming="$*"
852    deps=""
853
854    for fname in $incoming ; do
855        if [ ! -e "$fname" ] ; then
856            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
857            if echo $fname | grep lvm &> /dev/null ; then
858                LogFile "          This warning only affects you if you are using LVM."
859                if echo "$MODULES" | grep lvm &> /dev/null ; then
860                    LogFile "          I think you are, so please take heed!"
861                else
862                    LogFile "          I don't think you are, so don't worry about it."
863                fi
864            fi
865        else
866            deps="$deps $fname" 
867        fi
868    done
869    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
870}
871
872
873# Give all symlinks recursively of a full path name
874ReadAllLink() {
875    file="$1"
876
877    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
878        # We need to normalise the path with .. in it
879        file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
880    done
881    echo "$file"
882    if [ ! -h $file ]; then
883        return 0
884    fi
885
886    link=`readlink $file`
887    d=`dirname $file`
888    # Is link a relative or full path name
889    fchar=`echo $link | cut -c1`
890    # If mother dir is a link print it
891    if [ -h "$d" ]; then
892        echo "$d"
893        d2=`readlink $d`
894        c2=`echo $d2 | cut -c1`
895        if [ "$c2" != "/" ]; then
896            if [ "$c2" != "." ]; then
897                d="/$d2"
898            else
899                d="$d/$d2"
900            fi
901        fi
902        echo "$d/`basename $file`"
903    fi
904    if [ "$fchar" != "/" ]; then
905        # Relative or local link
906        ReadAllLink "$d/$link" 
907    else
908        # Absolute path
909        ReadAllLink $link 
910    fi
911}
912
913
914LocateFile() {
915    local i j path fname_to_find location output resolved tmp stub cache_id loclist
916    fname_to_find="$1"
917    # It's an absolute path
918    j=`echo "$fname_to_find" | cut -c1`
919    if [ _"$j" = _"/" ]; then
920        dn=`dirname $fname_to_find`
921        # We suppose that the link is already included, just add the new file
922        if [ -h "$dn" ]; then
923            newdn=`readlink -f $dn`
924            bn=`basename $fname_to_find`
925            output="$newdn/$bn"
926        else
927            output="$fname_to_find"
928        fi
929        if [ -h "$output" ] ; then
930            output="`mr-read-all-link $output` $output"
931        fi
932        echo "$output"
933        return 0
934    fi
935    # It's not an absolute path
936    output=""
937    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
938    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
939        [ -h "$path" ] && continue
940        [ ! -e "$path/$fname_to_find" ] && continue
941        output="$path/$fname_to_find $output"
942        if [ -h "$path/$fname_to_find" ] ; then
943            output="`mr-read-all-link $path/$fname_to_find` $output"
944        fi
945    done
946    if [ "$output" = "" ] ; then
947        return 1
948    fi
949    echo "$output"
950    return 0
951}
952
953LogProgress() {
954    local i progress modres noof_lines
955 
956    progress=$1
957    noof_lines=$2
958
959    echo -en "\r\t\t\t\t\t\t\t\t"
960    i=$(($progress*100))
961    if [ $noof_lines -ne 0 ]; then
962        i=$(($i/$noof_lines))
963    else
964        i=0
965    fi
966    echo -en "$i"
967    echo -en "%"
968    modres=$(($progress%4))
969    [ "$modres" -eq "0" ] && echo -en "\t/"
970    [ "$modres" -eq "1" ] && echo -en "\t-"
971    [ "$modres" -eq "2" ] && echo -en "\t\\"
972    [ "$modres" -eq "3" ] && echo -en "\t|"
973}
974
975# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
976MakeMondoConfigFile() {
977    local outfile use_lzo use_comp use_star
978    outfile=$1
979    > $outfile
980    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
981    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
982    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
983    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
984    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
985    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
986    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
987    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
988    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
989    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
990    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
991    echo "use-lzo $use_lzo" >> $outfile
992    echo "use-gzip $use_gzip" >> $outfile
993    echo "use-star $use_star" >> $outfile
994    echo "use-lzma $use_lzma" >> $outfile
995    echo "use-comp $use_comp" >> $outfile
996    echo "datestamp `date`" >> $outfile
997    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
998    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
999    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1023}
1024
1025# Get PV's for an LV
1026GetPVsForLV() {
1027  if [ -n "$1" ]; then
1028    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1029    if [ -z "$vg" ]; then
1030      return
1031    fi
1032    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1033  fi
1034}
1035
1036
1037MakeMountlist() {
1038    local mountlist all_partitions current_partition \
1039partition_size partition_format outstring partition_number \
1040partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1041absolute_partition old_partition_fmt current_lvolume uname skip
1042
1043    LogFile "------------------------------------"
1044    LogFile "Your raw fstab file looks like this:"
1045    LogFile "------------------------------------"
1046    cat $MY_FSTAB >> $LOGFILE
1047    LogAll "-----------------------------------"
1048    LogAll "Your mountlist will look like this:"
1049    LogAll "-----------------------------------"
1050
1051# mountlist(OUT)
1052    mountlist=$1
1053
1054# NB: partition = device
1055# NB: mountpt = where the device is mounted
1056
1057    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1058
1059    [ "$mountlist" != "" ] && rm -Rf $mountlist
1060    > $mountlist
1061    all_partitions=""
1062   
1063    if [ $LVM != "false" ]; then
1064        LogAll "INFO: Analyzing LVM..."
1065        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1066        if [ $? -ne 0 ]; then
1067            LVM="false"
1068        fi
1069        # Excluded LVs and GVs are not reported here
1070        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1071    fi
1072    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1073    for i in $IMAGE_DEVS ; do
1074        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1075    done
1076    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1077    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1078    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1079    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1080    for c_p in $all_partitions ; do
1081        # Skip fd/cd devices, network FS, cifs
1082        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1083        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1084        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1085            current_partition=`readlink -f $c_p`
1086            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1087                current_partition="$c_p"
1088            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1089                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1090                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1091            fi
1092            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1093        else
1094            current_partition="$c_p"
1095        fi
1096        [ "$c_p" = "none" ] && continue
1097        redhat_label=""
1098        label=""
1099        uuid=""
1100        absolute_partition=`readlink -f $c_p`
1101        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1102
1103        # set default in case we dont't find it
1104        str_to_find_fmt_with=$current_partition
1105
1106        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1107        # current_partition contains only first column of /etc/fstab
1108        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1109            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1110            actual_dev=""
1111
1112            # 1st try, findfs - the RHEL way of finding labels and their partitions
1113            if [ -x "/sbin/findfs" ]; then
1114                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1115            fi
1116   
1117            # 2nd try : blkid, the good way for all LABEL except swap
1118            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1119                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1120                # For LVM FS it will give a /dev/dm-# which should then be converted
1121                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1122                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1123                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1124                    for dev in `ls /dev/mapper/*`; do
1125                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1126                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1127                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1128                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1129                            break
1130                        fi
1131                    done
1132                fi
1133            fi
1134   
1135            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1136            # For LVM gives a /dev/mapper entry
1137            if [ "x$actual_dev" = "x" ]; then
1138                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1139            fi
1140   
1141            # 4th try, with vol_id
1142            # SWAP only
1143            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1144                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1145                for dev_swap in $list_swaps ; do
1146                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1147                    if [ "x$dev_exists" != "x" ]; then
1148                        actual_dev=$dev_swap
1149                        break;
1150                    fi
1151                done
1152            fi
1153
1154            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1155            # LABEL=SW-cciss/c0d0p3 (RDP)
1156            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1157            # SWAP only
1158            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1159                    skip=""
1160                    uname=$KERVERRUN
1161                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1162                    # 2.6.12 needs 16 (FC3)
1163                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1164                    # 2.6.19 and upper needs 1052
1165                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1166                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1167                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1168                    if [ $skip = "" ]; then
1169                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1170                    fi
1171                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1172                    do
1173                        # Location of the swap label for kernel 2.6
1174                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1175                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1176                            actual_dev=$try_dev
1177                        fi
1178                    done
1179            fi
1180
1181            # Check if one of all those tries has known success
1182            if [ "x$actual_dev" != "x" ]; then
1183                current_partition=$actual_dev
1184            else
1185                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1186            fi
1187        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1188        # current_partition contains only first column of /etc/fstab
1189        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1190            uuid=`echo "$current_partition" | cut -d'=' -f2`
1191            actual_dev=""
1192
1193            # 1st try, findfs - the RHEL way of finding labels and their partitions
1194            if [ -x "/sbin/findfs" ]; then
1195                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1196            fi
1197   
1198            # 2nd try : blkid, the good way for all UUID except swap
1199            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1200                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1201                # For LVM FS it will give a /dev/dm-# which should then be converted
1202                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1203                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1204                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1205                    for dev in `ls /dev/mapper/*`; do
1206                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1207                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1208                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1209                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1210                            break
1211                        fi
1212                    done
1213                fi
1214            fi
1215   
1216            # 3th try, with vol_id
1217            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1218                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1219                for dev in $list_dev ; do
1220                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1221                    if [ "x$dev_exists" != "x" ]; then
1222                        actual_dev=$dev
1223                        break;
1224                    fi
1225                done
1226            fi
1227
1228            # 4th try, with dumpuuid (VMWare only ?) for swap
1229            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1230                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1231                for dev in $list_dev ; do
1232                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1233                    if [ "x$dev_exists" != "x" ]; then
1234                        actual_dev=$dev
1235                        break;
1236                    fi
1237                done
1238            fi
1239
1240            # Check if one of all those tries has known success
1241            if [ "x$actual_dev" != "x" ]; then
1242                current_partition=$actual_dev
1243            else
1244                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1245            fi
1246        else
1247            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1248            # they use symlinks in fstab unrelated to what is shown in mount !
1249            if [ _"$partition_mountpt" = _"" ]; then
1250                # set default in case we dont't find it
1251                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1252                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1253                            str_to_find_fmt_with=$tmpp
1254                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1255                            break;
1256                        fi
1257                done
1258            fi
1259        fi
1260
1261        # Detects noauto partitions not mounted and exclude them
1262        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1263        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1264                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1265            continue
1266        fi
1267        # Detects bind partitions and exclude them
1268        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1269                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1270            continue
1271        fi
1272
1273        # Look for devices which have to be excluded
1274        skip=0
1275        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1276            l=""
1277            list_of_devices="`mr-read-all-link $current_partition`"
1278            for d in $list_of_devices; do
1279                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1280            done
1281
1282            # Remove PVs from LVs excluded
1283            l="$l `GetPVsForLV $current_partition`"
1284
1285            # We want a single unique list
1286            list_of_devices="`echo $l | sort -u`"
1287
1288            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1289                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1290                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1291                    skip=1
1292                    continue
1293                fi
1294            done
1295        fi
1296        if [ $skip -eq 1 ]; then
1297            continue
1298        fi
1299
1300        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1301        # Detects iso9660 ISO images and exclude them
1302        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1303                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1304            continue
1305        fi
1306        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1307        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1308        # the former is then a link to the latter, so we test whether
1309        # $current_partition is actually such a link or not and set
1310        # $current_lvolume accordingly. On Debian you may find more than one answer
1311        # so we remove the one corresponding to /dev/.static
1312        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1313        # principle is the same and we need to find the link to it as well.
1314        # Note that $current_lvolume may well be an
1315        # ordinary device. It is just to make sure that we feed the right value
1316        # into any of the LVM tools if possible.
1317
1318        current_lvolume="$current_partition"
1319        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1320            # .static dir are a Debian specificity
1321            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1322            echo $current_lvolume | grep -q ' '
1323            if [ $? -eq 0 ]; then
1324                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1325            fi
1326            # if it's not found, it may well be a real device such as a multipath one
1327            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1328            if [ _"$current_lvolume" = _"" ]; then
1329                current_lvolume="$current_partition"
1330            fi
1331        fi
1332        #
1333        # End of LVM device style variation code (other than $current_lvolume).
1334
1335        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1336            # Size computed via LVM not directly
1337            partition_size="lvm"
1338        else
1339            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1340            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1341            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1342                # Skip swap files
1343                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1344                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1345                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1346                [ "$partition_format" != "swap" ] && partition_format="swap"
1347                if [ "$partition_size" = "" ] ; then
1348                    totalsize=0
1349                    items=0
1350                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1351                        totalsize=$(($totalsize+$i))
1352                        items=$(($items+1))
1353                    done
1354                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1355                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1356                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1357                fi
1358            else
1359                partition_size=`SizeOfPartition $current_partition`
1360            fi
1361        fi
1362        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1363        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1364        if [ "$partition_mountpt" = "" ] ; then
1365            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1366                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1367                    partition_mountpt="raid"
1368                    partition_format="raid"
1369                else
1370                    partition_mountpt="lvm"
1371                    partition_format="lvm"
1372                fi
1373            fi
1374        fi
1375        psz=$partition_size
1376        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1377        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1378        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1379            partition_mountpt="image"
1380            old_partition_fmt=$partition_format
1381            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1382            partition_size=$(($partition_size+1)); # just in case
1383            if [ "$partition_format" = "Linux" ] ; then
1384                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1385                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1386                partition_format=$old_partition_fmt
1387            fi
1388        fi
1389
1390        if [ ! "$partition_mountpt" ] ; then
1391            LogFile "------- $FDISK -l $qq log ------------"
1392            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1393                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1394                [ "$partition_format" ] && break
1395            done
1396            LogFile "------- $FDISK log end ------------"
1397            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1398                partition_format="compaq"
1399            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1400                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1401                continue
1402            fi
1403        fi
1404        if [ "$redhat_label" ]; then
1405            label="$redhat_label"
1406        elif [ "$uuid" ]; then
1407            label="$uuid"
1408        fi
1409        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1410        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1411        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1412        if [ "$current_partition" = "" ] ; then
1413            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1414        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1415            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1416                partition_mountpt=raid
1417                partition_format=raid
1418                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1419                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1420            else
1421                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1422            fi
1423        elif [ "$partition_format" = "" ] ; then
1424            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1425        elif [ "$partition_size" = "" ] ; then
1426            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1427        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1428            continue
1429        else
1430            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1431                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1432                partition_format="vfat"
1433            fi
1434            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1435            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1436        fi
1437    done
1438    LogAll "-----------------------------------" 
1439}
1440
1441CheckMountlist() {
1442    local file=$1
1443    # Coherency verification
1444    ML01=`cat $file | wc -l`
1445    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1446    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1447    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1448    if [ "$ML01" -ne "$ML1" ]; then
1449        LogFile "--------------------------------------------"
1450        LogAll "WARNING: Duplicate device entry in mountlist"
1451        LogFile "--------------------------------------------"
1452    fi
1453    if [ "$ML02" -ne "$ML2" ]; then
1454        LogFile "--------------------------------------------"
1455        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1456        LogFile "------------------------------------------------"
1457    fi
1458}
1459
1460OfferToMakeBootableISO() {
1461    local i old_pwd
1462    if [ -z "$ISO_CMD" ]; then
1463        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1464        return
1465    fi
1466    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1467        echo -en "Shall I make a bootable CD image? (y/[n]) "
1468        read i
1469        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1470    fi
1471    rm -Rf $MINDI_TMP/iso
1472    mkdir -p $MINDI_TMP/iso/{images,archives}
1473    LogFile "INFO: mindi_lib = $MINDI_LIB"
1474    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1475    for i in memdisk memtest.bin memtest.img ; do
1476        j=$MINDI_LIB/$i
1477        k=$MINDI_TMP/iso
1478        if [ -e "$j" ] ; then
1479            LogAll "INFO: Copying $j to $k"
1480            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1481            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1482            if [ _"$MONDO_SHARE" != _"" ]; then 
1483                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1484            fi
1485        fi
1486    done
1487    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1488    if [ $KERNEL_IS_XEN = "yes" ]; then
1489        FindMboot32Binary
1490        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1491        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1492    fi
1493    # Useful for syslinux 5.x
1494    FindLdlinux32Binary
1495    if [ -e $LDLINUXC32 ]; then
1496        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1497    fi
1498    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1499    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1500
1501    if [ _"$MONDO_SHARE" != _"" ]; then 
1502        if [ $KERNEL_IS_XEN = "yes" ]; then
1503            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/iso/xen.gz). Did you run out of disk space?"
1504            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/iso/mboot.c32). Did you run out of disk space?"
1505        fi
1506        if [ -e $LDLINUXC32 ]; then
1507            cp $LDLINUXC32 $MONDO_ROOT/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/iso/ldlinux.c32. Did you run out of disk space?"
1508        fi
1509        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1510        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1511    fi
1512    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1513    if [ "$ARCH" != "ia64" ] ; then
1514        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1515    fi
1516    old_pwd=`pwd`
1517    cd "$MINDI_TMP/iso"
1518    if [ "$ARCH" != "ia64" ] ; then
1519        if [ _"$MONDO_SHARE" != _"" ]; then 
1520            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1521            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1522                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1523            fi
1524            if [ $KERNEL_IS_XEN = "yes" ]; then
1525                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1526            fi
1527            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1528        fi
1529        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1530    else
1531        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1532    fi
1533    if [ "$?" -ne "0" ] ; then
1534        LogFile "----------- $ISO_CMD's errors --------------"
1535        LogAll "$ISO_CMD returned the following errors:"
1536        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1537        LogAll "ERROR: Failed to create ISO image."
1538    else
1539        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1540    fi
1541    rm -f $MINDI_TMP/mkisofs.log
1542    cd "$old_pwd"
1543}
1544
1545
1546OfferToMakeBootableUSB() {
1547    local i
1548    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1549        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1550        read i
1551        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1552        if [ "$USBDEVICE" = "" ]; then
1553            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1554            read dev
1555            USBDEVICE=$dev
1556        fi
1557        echo "WARNING: This will erase all content on $USBDEVICE"
1558        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1559        read i
1560        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1561    fi
1562    rm -Rf $MINDI_TMP/usb
1563    mkdir -p $MINDI_TMP/usb
1564    USBPART="${USBDEVICE}1"
1565
1566    echo -en "Transforming $USBDEVICE in a Bootable device " 
1567    echo -en "."
1568    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1569    LogFile "INFO: Checking $USBDEVICE"
1570    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1571    if [ $? -ne 0 ]; then
1572        LogAll "ERROR: Unable to access $USBDEVICE"
1573        LogAll "       Make sure your USB device is plugged in"
1574        MindiExit -1
1575    fi
1576    echo -en "."
1577    # Some distro do auto mount at that point (Ubuntu)
1578    LogFile "INFO: Unmounting $USBPART just in case"
1579    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1580    # If your key has no MBR it may cause an issue
1581    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1582    if [ -r $MBRFILE ]; then
1583        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1584        dd if=$MBRFILE of=$USBDEVICE
1585    else
1586        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1587        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1588    fi
1589    LogFile "INFO: Preparing $USBDEVICE"
1590    cat > $MINDI_TMP/fdisk.txt << EOF
1591d
1592d
1593d
1594d
1595n
1596p
15971
1598
1599
1600t
1601b
1602a
16031
1604w
1605EOF
1606    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1607    if [ $? -ne 0 ]; then
1608        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1609        LogAll "       Make sure your USB device is plugged in"
1610        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1611        MindiExit -1
1612    fi
1613    LogFile "fdisk build file"
1614    LogFile "----------------"
1615    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1616    LogFile "----------------"
1617    rm -f $MINDI_TMP/fdisk.txt
1618    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1619    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1620    echo -en "."
1621    # Calling kpartx in case devices were not created
1622    if [ -x "/sbin/kpartx" ]; then
1623        /sbin/kpartx -a $USBDEVICE
1624    fi
1625    # Some distro do auto mount at that point (Ubuntu)
1626    LogFile "INFO: Unmounting $USBPART just in case again"
1627    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1628    echo -en "."
1629    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1630    if [ "`which dmsetup`" != "" ]; then
1631        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1632        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1633            LogFile "INFO: Removing $block_id from device mapper."
1634            sleep 1
1635            dmsetup remove $block_id
1636        fi
1637    fi
1638    echo -en "."
1639    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1640    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1641    if [ $? -ne 0 ]; then
1642        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1643        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1644        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1645        MindiExit -1
1646    fi
1647    echo -en "."
1648    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1649    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1650    if [ $? -ne 0 ]; then
1651        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1652        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1653        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1654        MindiExit -1
1655    fi
1656    echo -en "."
1657    mkdir -p $MINDI_TMP/usb/images
1658    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1659    echo -en "."
1660    LogFile "INFO: mindi_lib = $MINDI_LIB"
1661    for i in memdisk memtest.bin memtest.img ; do
1662        j=$MINDI_LIB/$i
1663        k=$MINDI_TMP/usb
1664        if [ -e "$j" ] ; then
1665            LogIt "INFO: Copying $j to $k"
1666            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1667            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1668        fi
1669    done
1670    echo -en "."
1671    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1672    echo -en "."
1673    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1674    echo -en "."
1675    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1676    echo -en "."
1677    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1678    echo -en "."
1679    LogAll "----------- syslinux's conf --------------"
1680    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1681    LogAll "------------------------------------------"
1682    umount $MINDI_TMP/usb
1683    if [ "$ARCH" != "ia64" ] ; then
1684        syslinux -v 2>&1 | grep -q 4.02
1685        if [ $? -eq 0 ]; then
1686            # This buggy version of syslinux requires a call to --stupid and not -s
1687            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1688            res=$?
1689        else
1690            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1691            res=$?
1692        fi
1693        if [ $res -ne 0 ] ; then
1694            LogAll "----------- syslinux's errors --------------"
1695            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1696            LogAll "------------------------------------------"
1697            LogIt "ERROR: Failed to create USB image."
1698        else
1699            echo -e "$DONE"
1700            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1701        fi
1702        rm -f $MINDI_TMP/syslinux.log
1703    else
1704        LogAll "ERROR: No USB boot support for ia64"
1705        MindiExit -1
1706    fi
1707}
1708
1709
1710MakeMessageFile() {
1711   
1712    if [ -x "/bin/lsb_release" ]; then
1713        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1714    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1715        DESC="Arch Linux"
1716        if [ -r /var/log/pacman.log ]; then
1717            # there are no releases but we can get the last system upgrade
1718            # Output example:   Arch Linux [2011-03-03 01:39]
1719            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1720        fi
1721    elif [ -r /etc/issue.net ]; then
1722        DESC=`head -1 /etc/issue.net`
1723    elif [ -r /etc/issue ]; then
1724        DESC=`head -1 /etc/issue`
1725    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1726        # For pb >= 0.9.8
1727        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1728    else
1729        DESC="Unknown desc"
1730    fi
1731    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1732    if [ _"$MONDO_SHARE" != _"" ]; then
1733        if [ "$CDRECOVERY" != "yes" ] ; then
1734            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1735                echo -en "Press <enter> to continue.\n"
1736            elif [ ! "$MINDI_TMP" ] ; then
1737                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1738                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1739                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1740                fi
1741            else
1742                echo -en "$BOOT_MEDIA_MESSAGE"
1743            fi
1744        else
1745            echo -en "\
1746To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1747CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1748        fi
1749    fi
1750
1751    # Also create the other help screens
1752    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1753    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1754    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1755}
1756
1757
1758MakeBootConfFile() {
1759    local options i ooo
1760    options=""
1761    # Type of boot file (elilo or syslinux/isolinux)
1762    type=$1
1763    if [ "$type" = "elilo" ]; then
1764        sep="="
1765    else
1766        sep=" "
1767    fi
1768
1769    # Generic header for conf file
1770    if [ "$type" != "elilo" ] ; then
1771        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1772    else
1773        echo -en "prompt\n"
1774    fi
1775
1776    # Compute which default option to boot from
1777    if [ "$CDRECOVERY" = "yes" ] ; then
1778        echo -en "default${sep}RESTORE\n"
1779    # In case it's mondoarchive
1780    elif [ _"$MONDO_SHARE" != _"" ]; then
1781        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1782            echo -en "default${sep}iso\n"
1783        else
1784            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1785        fi
1786    else
1787        echo -en "default${sep}expert\n"
1788    fi
1789
1790    # Handle timeout
1791    if [ "$CDRECOVERY" != "yes" ] ; then
1792        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1793    else
1794        echo -en "timeout${sep}10000\n"
1795    fi
1796    echo -en "\n"
1797
1798    # prepare which labels will be generated
1799    if [ "$CDRECOVERY" = "yes" ] ; then
1800        options="RESTORE expert"
1801    else
1802        if [ _"$MONDO_SHARE" != _"" ]; then
1803            options="interactive expert compare iso nuke isonuke"
1804        else
1805            options="expert"
1806        fi
1807    fi
1808
1809    # Generate rest of conf file
1810    for i in $options ; do
1811        ooo=$i
1812        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1813        if [ "$type" = "elilo" ]; then
1814            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1815        else
1816            ps="/"
1817            if [ "$type" = "syslinux" ]; then
1818                ps=""
1819            fi
1820            if [ $KERNEL_IS_XEN = "no" ]; then
1821                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1822            else
1823                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1824            fi
1825        fi
1826        echo -en "$outstr"
1827    done
1828    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1829        if [ "$type" = "elilo" ]; then
1830            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1831            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1832        else
1833            ps="/"
1834            if [ "$type" = "syslinux" ]; then
1835                ps=""
1836            fi
1837            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1838            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1839        fi
1840    fi
1841}
1842
1843
1844PrepareBootDiskImage_LILO() {
1845    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1846    imagesdir=$MINDI_CACHE
1847    kernelpath=$1
1848
1849    retval=0
1850
1851    old_pwd=`pwd`
1852    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1853    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1854    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1855    echo -en "..."
1856    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1857    mkdir -p $mountpoint
1858    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1859    LogFile "Creating vfat filesystem on $imagefile" 
1860    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1861    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1862
1863    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1864    mkdir -p $mountpoint/etc
1865    liloconf=$mountpoint/elilo.conf
1866
1867    MakeBootConfFile elilo > $liloconf
1868
1869    # Copy it so that CD-ROM menu entry is satisfied
1870    mountefi=0
1871    df -T | grep /boot/efi | grep -q vfat
1872    if [ $? -ne 0 ]; then
1873        mount /boot/efi
1874        if [ $? -ne 0 ]; then
1875            echo "You have to mount your EFI partition when using mindi"
1876            MindiExit -1
1877        fi
1878        mountefi=1
1879    fi
1880    el=`find /boot/efi -name elilo.efi`
1881    cp $el $mountpoint
1882    cp $liloconf $mountpoint
1883    if [ $mountefi -eq 1 ]; then
1884        umount /boot/efi 2>&1 > /dev/null
1885    fi
1886
1887    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1888    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1889    if [ "$?" -ne "0" ] ; then
1890        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1891        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1892        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1893        rm -f $MINDI_TMP/mtpt.$$
1894        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1895        retval=$(($retval+1))
1896    fi
1897    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1898
1899    mkdir -p $mountpoint/tmp
1900    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1901        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1902    fi
1903
1904    # copy the kernel across
1905    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1906    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1907    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1908    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1909    if [ "$?" -ne "0" ] ; then
1910        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1911        du -sk $mountpoint/* >> $LOGFILE
1912        LogFile "--- end of list of files ---"
1913        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1914        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1915        cd "$old_pwd"
1916        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1917        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1918    #   losetup /dev/loop0 -d
1919        [ "$imagefile" != "" ] && rm -f $imagefile
1920        LogIt "ERROR: Sorry, your kernel is too big for your image"
1921        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1922        return 0
1923    fi
1924    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1925    LogFile "INFO: Free space left on image = $free_space KB"
1926    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1927    # make it bootable
1928    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1929    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1930    if [ "$KERN_DISK_MADE" ] ; then
1931        LogFile "INFO: Not running LILO. It's not that kind of disk."
1932    fi
1933
1934    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1935    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1936    echo -en "..."
1937    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1938    if [ "$retval" -eq "0" ] ; then
1939        echo -en "...$DONE\n"
1940        if [ "$KERN_DISK_MADE" ] ; then
1941            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1942        fi
1943    else
1944        echo -en "...failed\n"
1945        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1946        [ "$imagefile" != "" ] && rm -f $imagefile
1947    fi
1948    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1949    return $retval
1950}
1951
1952
1953PrepareBootDiskImage_ISOLINUX() {
1954    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1955    imagesdir=$MINDI_CACHE
1956    kernelpath=$1
1957    do_boot_root_thingy=""
1958    retval=0
1959
1960    old_pwd=`pwd`
1961    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1962    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1963    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1964    echo -en "..."
1965    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1966    mkdir -p $mountpoint
1967    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1968    LogFile "INFO: Creating vfat filesystem on $imagefile"
1969    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1970    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1971    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1972
1973    # Only move it now to its final destination and use it now
1974    mv $imagefile $imagesdir
1975    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1976
1977    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1978
1979    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1980    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1981    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1982    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1983    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1984    if [ "$?" -ne "0" ] ; then
1985        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1986        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1987        LogAll "       Please unload some of your modules and try again."
1988        rm -f $MINDI_TMP/mtpt.$$
1989        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1990        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1991        retval=$(($retval+1))
1992    fi
1993
1994    mkdir -p $mountpoint/tmp
1995    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1996        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1997    fi
1998
1999    # copy the kernel across
2000    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2001    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2002    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2003         
2004    retval=0
2005    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2006    retval=$?
2007    if [ $KERNEL_IS_XEN = "yes" ]; then
2008        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2009        let retval+=$?
2010    fi
2011 
2012    if [ "$retval" -ne "0" ] ; then
2013        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2014        du -sk $mountpoint/* >> $LOGFILE
2015        LogFile "--- end of list of files ---"
2016        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2017        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2018        cd "$old_pwd"
2019        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2020        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2021
2022        LogIt "ERROR: Sorry, your kernel is too big for your image"
2023        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2024    fi
2025    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2026    LogFile "INFO: Free space left on image = $free_space KB"
2027    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2028
2029    # make it bootable
2030    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2031    mkdir -p $mountpoint/etc
2032    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2033    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2034    echo -en "..."
2035    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2036
2037    if [ "$retval" -eq "0" ] ; then
2038        echo -en "...$DONE\n"
2039        if [ "$KERN_DISK_MADE" ] ; then
2040            [ "$imagefile" != "" ] && rm -f $imagefile
2041            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2042        fi
2043    else
2044        echo -en "...failed\n"
2045        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2046        [ "$imagefile" != "" ] && rm -f $imagefile
2047    fi
2048    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2049    return $retval
2050}
2051
2052
2053ParseModprobeForIncludes() {
2054local MODPROBE_CONF mpincfile includes include
2055
2056MODPROBE_CONF=/etc/modprobe.conf
2057mpincfile=$1
2058touch $mpincfile
2059if [ -a $MODPROBE_CONF ]; then
2060    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2061    if [ -n "$includes" ]; then
2062        for include in $includes
2063        do
2064            if [ -a "$include" ]; then
2065                echo $include >> $mpincfile
2066            fi
2067        done
2068    fi
2069fi
2070}
2071
2072
2073PrepareDataDiskImages() {
2074    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2075
2076    imagesdir=$MINDI_CACHE
2077    rm -f $imagesdir/mindi.iso
2078    needlist=$MINDI_TMP/what-we-need.txt
2079    bigdir=$MINDI_TMP/bigdir
2080    mkdir -p $bigdir/usr/bin
2081    mkdir -p $bigdir/usr/sbin
2082    includefile=$MINDI_TMP/$$.includefile.txt
2083
2084    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2085    if [ -e "$DEPLIST_FILE" ]; then
2086        lfiles="$DEPLIST_FILE $lfiles"
2087    fi
2088    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2089    ParseModprobeForIncludes $includefile
2090    lines=$(($lines+`cat $includefile | wc -l`))
2091    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2092    res=$?
2093    rm -f $includefile
2094    ListKernelModulePaths >> $needlist
2095    if [ "$res" -ne "0" ] ; then
2096        Die "You have $res files present in dependency list\nbut absent from filesystem."
2097    fi
2098    FindAndAddUserKeyboardMappingFile
2099    mkdir -p $bigdir/tmp
2100    if [ _"$MONDO_SHARE" != _"" ]; then
2101        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2102        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2103    fi
2104    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2105    DropOptimizedLibraries $needlist $bigdir
2106    echo -en "Assembling dependency files"
2107
2108    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2109
2110    # also copy io.sys and msdos.sys, if we can find them
2111    for i in `mount | cut -d' ' -f3` ; do
2112        for j in io.sys msdos.sys ; do
2113            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2114        done
2115    done
2116
2117    # master boot record, too
2118    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2119    if [ "$i" ] ; then
2120        LogAll "INFO: Backing up $i's MBR"
2121        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2122        sleep 1
2123        sync
2124        j=$i
2125        [ -h "$j" ] && j=`readlink -f $j`
2126        LogAll "INFO: Creating /dev/boot_device ($j)"
2127        mkdir -p $bigdir/dev
2128        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2129    fi
2130
2131    old_pwd=`pwd`
2132    cd "$bigdir"
2133
2134    # Get terminfo content
2135    ti="usr/share/terminfo/l"
2136    if [ -d /$ti ]; then
2137        mkdir -p $ti
2138        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2139    fi
2140    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2141        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2142        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2143    fi
2144    if [ -d "/lib/dev-state" ]; then 
2145        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2146    fi
2147    cd "$old_pwd"
2148    echo -e "$DONE"
2149    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2150    MakeMountlist $MINDI_TMP/mountlist.txt
2151    CheckMountlist $MINDI_TMP/mountlist.txt
2152    mkdir -p $bigdir/tmp
2153    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2154    if [ _"$MONDO_SHARE" != _"" ]; then
2155        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2156    fi
2157    if [ $LVM != "false" ]; then
2158        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2159        if [ "$?" -ne "0" ]; then
2160            LVM="false"
2161            rm -f $bigdir/tmp/i-want-my-lvm
2162        else
2163            LogFile "Your i-want-my-lvm file content is:"
2164            LogFile "-----------------------------------"
2165            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2166            LogFile "-----------------------------------"
2167        fi
2168    fi
2169    LogFile "Your mountlist.txt file content is:"
2170    LogFile "-----------------------------------"
2171    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2172    LogFile "-----------------------------------"
2173
2174    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2175    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2176    if [ _"$MONDO_SHARE" != _"" ]; then
2177        for q in filelist.full.gz biggielist.txt ; do
2178            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2179            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2180        done
2181    fi
2182
2183    echo -en "Tarring and zipping the data content..."
2184    size_of_all_tools=`du -sk $bigdir | cut -f1`
2185    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2186    LogFile "Size of the data content"
2187    LogFile "------------------------"
2188    du -sk $imagesdir/*gz >> $LOGFILE
2189    LogFile "------------------------"
2190    echo -e "$DONE"
2191
2192    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2193    rm -rf $bigdir
2194    rm -f $needlist
2195}
2196
2197
2198ProcessLDD() {
2199    local incoming f d nd bd bnd
2200    read incoming
2201    while [ "$incoming" != "" ]; do
2202        # We take the full path name of the dyn. lib. we want
2203        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2204        for f in $incoming ; do
2205            # echo modified file name if one of the parent dir is a link
2206            # by replacing the original dirname by the destination of the link
2207            d="`dirname $f`"
2208            found="false"
2209            while [ "$d" != "/" ]; do
2210                if [ -h "$d" ]; then
2211                    nd=`readlink -f $d`
2212                    bd=`basename $d`
2213                    bnd=`basename $nd`
2214                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2215                    echo $d
2216                fi
2217                d="`dirname $d`"
2218            done
2219
2220            echo "$f"
2221            echo "`ReadAllLink $f`"
2222        done
2223        read incoming
2224    done
2225}
2226
2227
2228Prompt() {
2229    echo -en "$1"
2230    read line
2231}
2232
2233
2234ReadLine() {
2235    local i incoming
2236    read incoming
2237    i=0
2238    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2239        i=$(($i+1))
2240        read incoming
2241    done
2242    echo "$incoming"
2243}
2244
2245
2246SizeOfPartition() {
2247    local devpath drive res stub
2248    device=$1
2249    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2250        Die "Cannot find $device's size - is your /etc/fstab sane?"
2251    fi
2252    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2253        res=`SizeOfRaidPartition $device`
2254        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2255        echo "$res"
2256        return 0
2257    fi
2258    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2259    res=`$FDISK -s $device 2>> $LOGFILE`
2260    # end patch
2261    # take only the first in case of multiple mount (cifs, nfs, ...)
2262    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2263    [ "$res" = "" ] && res="-1"
2264    echo $res
2265    return 0
2266}
2267
2268
2269SizeOfRaidPartition() {
2270    local real_dev smallest_size silly tmp
2271
2272    silly=999999999
2273    smallest_size=$silly
2274
2275    for real_dev in `GetRaidDevMembers $1` ; do
2276        tmp=`SizeOfPartition $real_dev`
2277        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2278    done
2279
2280    if [ "$smallest_size" = "$silly" ] ; then
2281        echo "-1"
2282        return 1
2283    else
2284        echo "$smallest_size"
2285        return 0
2286    fi
2287}
2288
2289
2290StripExecutable()
2291{
2292    local tmpfile
2293
2294    tmpfile=$MINDI_TMP/stripped.$$.dat
2295    [ -d "$1" ] || [ -h "$1" ] && return
2296    cp -f $1 $tmpfile 2>> $LOGFILE
2297    strip $tmpfile 2> /dev/null
2298    if [ "$?" -eq "0" ] ; then
2299        cp -f $tmpfile $1 2>> $LOGFILE
2300        LogFile "INFO: Stripped binary $2"
2301    fi
2302    rm -f $tmpfile
2303}
2304
2305KernelVer() {
2306        local fkern_ver fname
2307
2308        fname=$1
2309        file $fname | grep -q gzip
2310        if [ "$?" -eq "0" ] ; then
2311            # Used by ia64
2312            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2313        else
2314            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2315        fi
2316        echo "$fkern_ver"
2317}
2318
2319
2320# WARNING: This function should just echo the final result !!!
2321#
2322TryToFindKernelPath() {
2323    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2324
2325    we_want_version=$KERVERRUN
2326    possible_kernels=""
2327    duff_kernels=""
2328    output=""
2329   
2330    if [ "$ARCH" = "ia64" ] ; then
2331       root="/boot/efi/efi"
2332    else
2333       root="/"
2334    fi
2335    # See if we're booted from a Xen kernel
2336    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2337    if [ -f /proc/xen/capabilities ]; then
2338        # It's a Xen kernel
2339        KERNEL_IS_XEN="yes"
2340        LogFile "INFO: It's a Xen kernel..."
2341    fi
2342
2343    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2344        [ ! -e "$fname" ] && continue
2345        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2346        fkern_ver=`KernelVer $fname`
2347        [ "$fkern_ver" = "" ] && continue
2348        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2349        [ -f "$fname" ] || continue
2350        [ -h "$fname" ] && continue
2351        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2352        file $fname | grep -q gzip
2353        if [ "$?" -eq "0" ] ; then
2354            # Used by ia64
2355            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2356                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2357                duff_kernels="$fname $duff_kernels"
2358            else
2359                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2360                possible_kernels="$fname $possible_kernels"
2361            fi
2362        else
2363            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2364                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2365                duff_kernels="$fname $duff_kernels"
2366            else
2367                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2368                possible_kernels="$fname $possible_kernels"
2369            fi
2370        fi
2371    done
2372    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2373        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2374    fi
2375    if [ ! "$possible_kernels" ] ; then
2376        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2377        possible_kernels="$duff_kernels"
2378        if [ ! "$possible_kernels" ] ; then
2379            LogAll "INFO: Sorry, no duff kernels either"
2380        else
2381            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2382            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2383        fi
2384    fi
2385    if [ $KERNEL_IS_XEN = "yes" ]; then
2386        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2387        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2388    fi
2389    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2390    noof_kernels=`CountItemsIn "$possible_kernels"`
2391    if [ "$noof_kernels" -eq "0" ] ; then
2392        LogAll "Could not find your kernel."
2393        if [ -e "/boot/vmlinuz" ] ; then
2394            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2395            output=/boot/vmlinuz
2396        else
2397            output=""
2398        fi
2399    elif [ "$noof_kernels" -eq "1" ] ; then
2400        kp=`echo "$possible_kernels" | sed s/' '//`
2401        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2402        output="$kp"
2403    else
2404        for i in $possible_kernels ; do
2405            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2406                LogAll "INFO: OK, I used my initiative and found that "
2407                LogAll "INFO: $i is probably your kernel. "
2408                output="$i"
2409                break
2410            fi
2411        done
2412        if [ ! -n "$output" ]; then
2413            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2414                output=/boot/vmlinuz
2415                LogFile "INFO: Schlomo, this one's for you."
2416            else
2417                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2418                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2419                LogFile "INFO: $possible_kernels"
2420                output=""
2421            fi
2422        fi
2423    fi
2424    if [ $KERNEL_IS_XEN = "yes" ]; then
2425        if [ "$noof_xenkernels" -eq "0" ]; then
2426            xenkernelpath=""
2427        elif [ "$noof_xenkernels" -eq "1" ]; then
2428            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2429            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2430        else
2431            for i in $possible_xenkernels ; do
2432                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2433                    LogFile "INFO: OK, I used my initiative and found that "
2434                    LogFile "INFO: $i is probably your Xen kernel. "
2435                    xenkernelpath="$i"
2436                    break
2437                fi
2438            done
2439            if [ ! -n "$xenkernelpath" ]; then
2440                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2441                if [ ! -n "$new_possible_xenkernels" ]; then
2442                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2443                    LogFile "INFO: Using $xenkernelpath"
2444                else
2445                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2446                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2447                    LogFile "INFO: $possible_xenkernels"
2448                    output=""
2449                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2450                    LogFile "INFO: Using $xenkernelpath"
2451                fi
2452            fi
2453        fi
2454        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2455            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2456        fi
2457    fi
2458    LogAll "TryToFindKernelPath found $output"
2459    echo "$output"
2460}
2461
2462
2463TurnTgzIntoRdz() {
2464    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2465
2466    tgz_dir_fname=$1
2467    rdz_fname=$2
2468    kernelsize=$3
2469    maxsize=$(($BOOT_SIZE-$kernelsize))
2470    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2471    tempfile=$MINDI_TMP/temp.rd
2472    res=0
2473    echo -en "..."
2474    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2475    echo -en "..."
2476    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2477    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2478    echo -en "..."
2479    mkdir -p $mountpoint
2480    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2481    echo -en "..."
2482    old_pwd=`pwd`
2483    cd "$mountpoint"
2484
2485    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2486    for d in bin sbin lib lib64; do
2487        if [ -h "/$d" ]; then
2488            thelink=`readlink /$d`
2489            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2490            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2491            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2492                rmdir $mountpoint/$d
2493            fi
2494            if [ ! -h $mountpoint/$d ]; then
2495                rm -f $mountpoint/$d 2> /dev/null
2496                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2497            fi
2498        fi
2499    done
2500    LogFile "INFO: what is now in $mountpoint"
2501    ls -alR $mountpoint >> $LOGFILE
2502   
2503    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2504    for f in $tgz_dir_fname/*; do 
2505        if [ ! -r $f ]; then
2506            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2507        else
2508            cp -Rdf $f . 2>&1 >> $LOGFILE
2509        fi
2510    done
2511    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2512    ln -sf usr/sbin/init linuxrc
2513
2514    cd dev || Die "Can't cd to dev"
2515    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2516    rm -f dev-entries.tgz
2517    cd ..
2518
2519    for w in insmod.static insmod.static.old ; do
2520        s=`which $w 2> /dev/null`
2521        if [ -e "$s" ] ; then
2522            tar cf - -C / $s 2> /dev/null | tar xf -
2523        fi
2524    done
2525
2526    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2527   
2528    # Copy of files mandatory for ssh to automate mount if sshfs is used
2529    mkdir $mountpoint/.ssh $mountpoint/tmp
2530    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2531    cat > $mountpoint/tmp/myssh << EOF
2532ssh -o StrictHostKeyChecking=no $*
2533EOF
2534    chmod 755 $mountpoint/tmp/myssh
2535
2536    # Copy of files mandatory for ld.so
2537    cp -a /etc/ld.so.c* $mountpoint/etc
2538
2539    # Handle the case where busybox and mount are dynamically linked
2540    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2541    if [ $? -eq 0 ]; then
2542        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2543        rm -f bin/mount
2544    fi
2545
2546    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2547    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2548    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2549        if [ -r $f ]; then
2550            echo $f >> $MINDI_TMP/minimal.lis
2551            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2552        fi
2553    done
2554    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2555        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2556    done
2557    # Initial / are trucated by tar
2558    finallist=""
2559    # Remove directories from the list, as tar/cp will create them anyway
2560    # and it may hurt if /lib is in it as on Debian/Ubuntu
2561    # recent bash says that -d is true for a link to a dir !
2562    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2563        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2564            finallist="$finallist $f"
2565        fi
2566    done
2567    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2568    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2569    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2570
2571    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2572    ln -sf /bin/bash bin/sh
2573    LogIt "INFO: Using bash as default shell"
2574    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2575
2576    # Avoids an issue on some distro (RHEL5)
2577    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2578
2579    mkdir -p $mountpoint/tmp
2580    # Management of udev (which includes modprobe in rules)
2581    ps auxww | grep -v grep | grep -qw udevd
2582    if [ $? -eq 0 ]; then
2583        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2584        LogIt "INFO: udev device manager found"
2585        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2586        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2587        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2588        # Do not do it if it's a link (Ubuntu 64 bits #503)
2589        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2590            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2591        fi
2592        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2593            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2594        fi
2595        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2596            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2597        fi
2598        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2599            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2600            lis=""
2601            # Get only the files which exist in that list
2602            # and potentially their symlink structure
2603            for i in $lis2; do
2604                if [ -h $i ]; then
2605                    j=$i
2606                    while [ -h $j ]; do
2607                        lis="$lis $j"
2608                        j=`readlink -f $j`
2609                    done
2610                    lis="$lis $j"
2611                elif [ -f $i ]; then
2612                    lis="$lis $i"
2613                fi
2614            done
2615            # And their deps
2616            LocateDeps $lis > $MINDI_TMP/udev.lis
2617            for i in $lis; do
2618                if [ "`echo $i | cut -c1`" = "/" ]; then
2619                    j=`echo $i | cut -c2-`
2620                    [ "$j" != "" ] && rm -f $j
2621                fi
2622                echo "$i" >> $MINDI_TMP/udev.lis
2623            done
2624            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2625            echo "cp -a -n --parents `sort -u $MINDI_TMP/udev.lis` -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2626            cp -a -n --parents `sort -u $MINDI_TMP/udev.lis` -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2627            rm -f $MINDI_TMP/udev.lis
2628        else
2629            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2630            LogAll "         mindi will use static devices which may cause problems"
2631            rm -f $mountpoint/tmp/USE-UDEV
2632        fi
2633    fi
2634
2635    # Management of potential HW info (ProLiant only at the moment)
2636    rm -rf $MINDI_CACHE/bkphw
2637    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2638    if [ -d $MINDI_CACHE/bkphw ]; then
2639        LogIt "INFO: Hardware Information found and saved ..."
2640        cp -rp $MINDI_CACHE/bkphw .
2641        if [ -f $MINDI_CACHE/tools.files ]; then
2642            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2643            LocateDeps $lis > $MINDI_TMP/tools.lis
2644            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2645        fi
2646        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2647            mv -f $MINDI_CACHE/mindi-rsthw .
2648            chmod 755 ./mindi-rsthw
2649        fi
2650        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2651    fi
2652
2653    # Management of perl scripts delivered needed at restore time
2654    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2655    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2656
2657    for w in cdrom groovy-stuff ; do
2658        mkdir -p mnt/$w
2659    done
2660
2661    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2662
2663    echo -en "..."
2664    cd /
2665
2666    needed_modules=""
2667    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2668
2669    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2670        # For PXE boot
2671        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2672    fi
2673    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2674        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2675    fi
2676    for i in $DENY_MODS; do
2677        LogFile "INFO: Removing $i from the list of modules to load"
2678        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2679    done
2680
2681    if [ "${kernelname}" != "" ]; then
2682        needed_modules_path=lib/modules/${kernelname}
2683        mkgmopt="-k $needed_modules_path"
2684    else
2685        needed_modules_path=lib/modules/$KERVERRUN
2686        mkgmopt="-k $KERVERRUN"
2687    fi
2688
2689    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n         If you're not using a modular kernel then mindi won't probably work."
2690    needed_modules=`mr-kernel-get-modules $mkgmopt $list_of_groovy_mods`
2691
2692    LogFile "INFO: Adding $needed_modules to the rootfs"
2693    cp --parents -aL $needed_modules $mountpoint/ 2>> $MINDI_TMP/$$.log || LogIt "ERROR: Unable to copy modules to $mountpoint" $MINDI_TMP/$$.log
2694
2695    # Uncompress modules if not using udev and native modprobe
2696    if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2697        for i in $needed_modules; do
2698            if [ "`echo "$i" | grep -E ".gz$"`" ]; then
2699                gunzip -f $mountpoint/$i
2700            fi
2701            if [ "`echo "$i" | grep -E ".bz$"`" ]; then
2702                bunzip2 -f $mountpoint/$i
2703            fi
2704            if [ "`echo "$i" | grep -E ".xz$"`" ]; then
2705                unxz -f $mountpoint/$i
2706            fi
2707            LogFile "INFO: Uncompressing $i"
2708        done
2709    fi
2710
2711    # Also copy modules.* in case of udev so that normal modprobe works
2712    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2713
2714    # Copy FW in case some drivers needs it
2715    for d in "/lib" "/usr/lib"; do
2716        if [ -d "$d/firmware" -a ! -h $d ]; then
2717            cp -a "$d/firmware" "$mountpoint/$d"
2718        fi
2719    done
2720
2721    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2722    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2723        if [ -d "$d/multipath" -a ! -h $d ]; then
2724            cp -a "$d/multipath" "$mountpoint/$d"
2725        fi
2726    done
2727
2728    # Copy an additional ProLiant tool for OBDR support
2729    if [ -f $MINDI_TMP/OBDR ]; then
2730        found=0
2731        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2732            mkdir -p $mountpoint/usr/bin
2733            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2734            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2735            found=1
2736        fi
2737        if [ -x /usr/bin/sg_wr_mode ]; then
2738            mkdir -p $mountpoint/usr/bin
2739            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2740            LocateDeps $lis > $MINDI_TMP/obdr.lis
2741            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2742            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2743            found=1
2744        fi
2745        if [ $found -eq 0 ]; then
2746            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2747            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2748        fi
2749    fi
2750
2751    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2752        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2753        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2754        rm -f $mountpoint/sbin/devfsd
2755    fi
2756    cd "$old_pwd"
2757    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2758    if [ _"$MONDO_SHARE" != _"" ]; then
2759        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2760        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2761        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2762        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2763        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2764        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2765        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2766        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2767        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2768    fi
2769    mkdir -p $mountpoint/proc
2770    LogFile "---------------------------"
2771    LogFile "Content of initial ramdisk:"
2772    LogFile "---------------------------"
2773    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2774    LogFile "---------------------------"
2775
2776    # Determine what filesystem to use for initrd image
2777    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2778    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2779    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2780    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2781        # say what will be used
2782        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2783        # kernel expects linuxrc in ext2 filesystem
2784        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2785        # unmount loop filesystem and create image file using the standard approach
2786        umount $mountpoint || Die "Cannot unmount $tempfile"
2787        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2788        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2789            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2790        else
2791            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2792        fi
2793        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2794        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2795        rm -f ${rdz_fname}.tmp
2796        # log that we are done
2797        LogFile "      ...done."
2798    elif [ "$gvFileSystem" = "initramfs" ]; then
2799        # say what will be used
2800        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2801        # make sure that cpio is there
2802        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2803        # go into filesystem
2804        cd "$mountpoint"
2805        # kernel expects init in cpio filesystem
2806        ln -sf sbin/init init
2807        # create cpio image file and unmount loop filesystem
2808        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2809        cd "$old_pwd"
2810        umount $mountpoint || Die "Cannot unmount $tempfile"
2811        # log that we are done
2812        LogFile "      ...done."
2813    else
2814        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2815    fi
2816
2817    if [ "$res" -eq "0" ] ; then
2818        echo -en "..."
2819    else
2820        echo -en "\rMade an rdz WITH ERRORS.           \n"
2821    fi
2822    return 0
2823}
2824
2825
2826##############################################################################
2827#----------------------------------- Main -----------------------------------#
2828##############################################################################
2829
2830# Now we can create what we need
2831mkdir -p $MINDI_TMP
2832
2833# Purge from potential old run
2834if [ _"$MINDI_CACHE" = _"" ]; then
2835    Die "MINDI_CACHE undefined"
2836fi
2837
2838# --nolog needs to be first, and is used in analyze-my-lvm
2839if [ "$1" = "--nolog" ] ; then
2840    shift
2841    LOGFILE=/dev/stderr
2842else
2843    > $LOGFILE
2844fi
2845if [ "$1" = "--printvar" ] ; then
2846    shift
2847    if [ _"$1" != _"" ] ; then
2848        set | grep -Ew "^$1" | cut -d= -f2
2849    fi
2850    exit 0
2851fi
2852
2853LogFile "mindi v$MINDI_VERSION"
2854LogFile "$ARCH architecture detected"
2855LogFile "mindi called with the following arguments:"
2856echo "$@">> $LOGFILE
2857LogFile "Start date : `date`"
2858LogFile "-----------------------------"
2859
2860[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2861
2862# Log some capital variables
2863[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2864[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2865LogFile "MONDO_SHARE = $MONDO_SHARE"
2866LogFile "MINDI_LIB = $MINDI_LIB"
2867LogFile "MINDI_SBIN = $MINDI_SBIN"
2868LogFile "MINDI_CONF = $MINDI_CONF"
2869if [ -f $MINDI_CONFIG ]; then
2870    LogFile "-----------------------------"
2871    LogFile " Mindi configuration file    "
2872    LogFile "-----------------------------"
2873    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2874    LogFile "-----------------------------"
2875fi
2876LogFile "In Mindi"
2877LogFile "--------"
2878LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2879LogFile "BOOT_SIZE = $BOOT_SIZE"
2880LogFile "--------"
2881
2882trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2883
2884# Sanity checks
2885which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2886which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2887which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2888which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2889if which awk &> /dev/null ; then
2890    if ! which gawk &> /dev/null ; then
2891        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2892    fi
2893fi
2894which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2895[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2896
2897[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2898
2899# Update the PATH variable if incomplete
2900if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2901    PATH=$PATH:/sbin:/usr/sbin
2902    export PATH
2903    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2904    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2905    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2906fi
2907
2908if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2909    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2910fi
2911
2912### TODO
2913### Fix as it's not mandatory on ia64
2914if [ "$ARCH" = "ia64" ] ; then
2915    if which elilo &> /dev/null ; then
2916        LILO_EXE=elilo
2917    else
2918        LILO_EXE=`which false 2> /dev/null`
2919    fi
2920else
2921    FindIsolinuxBinary
2922fi
2923trap "Aborted" SIGTERM
2924DONE="\r\t\t\t\t\t\t\t\tDone.         "
2925kernelpath=""
2926MONDO_ROOT=/var/cache/mondo
2927mkdir -p $MONDO_ROOT
2928
2929if [ -d "/proc/lvm" ]; then
2930    # LVM v1
2931    LVMCMD=""
2932    LVM="v1"
2933elif [ -d "/dev/mapper" ]; then
2934    # LVM v2
2935    LVMCMD="lvm"
2936    LVM="v2"
2937else
2938    LVM="false"
2939fi
2940
2941if [ -e "/proc/cmdline" ]; then
2942    CMDLINE="/proc/cmdline"
2943elif [ -e "/tmp/cmdline" ]; then
2944    CMDLINE="/tmp/cmdline"
2945else
2946    CMDLINE="/dev/null"
2947fi
2948
2949LogFile "INFO: LVM set to $LVM"
2950LogFile "----------"
2951LogFile "mount result:"
2952LogFile "-------------"
2953mount >> $LOGFILE
2954if [ -e /etc/raidtab ]; then
2955    LogFile "-------------"
2956    LogFile "/etc/raidtab content:"
2957    LogFile "-------------"
2958    cat /etc/raidtab >> $LOGFILE
2959else
2960    LogFile "No file /etc/raidtab"
2961fi
2962if [ -e /etc/mdadm.conf ]; then
2963    LogFile "-------------"
2964    LogFile "/etc/mdadm.conf content:"
2965    LogFile "-------------"
2966    cat /etc/mdadm.conf >> $LOGFILE
2967else
2968    LogFile "-------------"
2969    LogFile "No file /etc/mdadm.conf"
2970fi
2971LogFile "-------------"
2972LogFile "cat $CMDLINE"
2973LogFile "-------------"
2974cat $CMDLINE >> $LOGFILE
2975LogFile "-------------"
2976LogFile "cat /proc/swaps:"
2977LogFile "-------------"
2978cat /proc/swaps >> $LOGFILE
2979LogFile "-------------"
2980if [ -e /proc/mdstat ]; then
2981    LogFile "cat /proc/mdstat:"
2982    LogFile "-------------"
2983    cat /proc/mdstat >> $LOGFILE
2984else
2985    LogFile "No pseudo file /proc/mdstat"
2986fi
2987LogFile "-------------"
2988LogFile "cat /proc/partitions:"
2989LogFile "-------------"
2990cat /proc/partitions >> $LOGFILE
2991LogFile "-------------"
2992LogFile "cat /proc/filesystems:"
2993LogFile "-------------"
2994cat /proc/filesystems >> $LOGFILE
2995LogFile "-------------"
2996LogFile "lsmod result:"
2997LogFile "-------------"
2998lsmod >> $LOGFILE
2999MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3000if [ -x /usr/sbin/esxcfg-module ]; then
3001    LogFile "-------------"
3002    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3003    LogFile "-------------"
3004    LogFile "VMWare modules"
3005    LogFile "-------------"
3006    /usr/sbin/esxcfg-module -l >> $LOGFILE
3007    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3008fi
3009LogFile "Liste of extra modules is:" 
3010LogFile "-------------" 
3011LogFile "$EXTRA_MODS" 
3012LogFile "-------------" 
3013LogFile "FORCE_MODS:"
3014LogFile "-------------"
3015LogFile "$FORCE_MODS"
3016LogFile "-------------"
3017LogFile "DENY_MODS:"
3018LogFile "-------------"
3019LogFile "$DENY_MODS"
3020LogFile "-------------"
3021LogFile "df result:"
3022LogFile "----------"
3023df -aT >> $LOGFILE
3024LogFile "-------------"
3025LogFile "df -i result:"
3026LogFile "----------"
3027df -i >> $LOGFILE
3028LogFile "-------------"
3029if [ -r /boot/grub/menu.lst ]; then
3030    LogFile "-------------"
3031    LogFile "INFO: /boot/grub/menu.lst content"
3032    LogFile "-------------"
3033    cat /boot/grub/menu.lst >> $LOGFILE
3034    LogFile "-------------"
3035fi
3036if [ -r /boot/grub/grub.conf ]; then
3037    LogFile "-------------"
3038    LogFile "INFO: /boot/grub/grub.conf content"
3039    LogFile "-------------"
3040    cat /boot/grub/grub.conf >> $LOGFILE
3041    LogFile "-------------"
3042fi
3043if [ -r /boot/grub/grub.cfg ]; then
3044    LogFile "-------------"
3045    LogFile "INFO: /boot/grub/grub.cfg content"
3046    LogFile "-------------"
3047    cat /boot/grub/grub.cfg >> $LOGFILE
3048    LogFile "-------------"
3049fi
3050if [ -r /boot/grub/device.map ]; then
3051    LogFile "-------------"
3052    LogFile "INFO: /boot/grub/device.map content"
3053    LogFile "-------------"
3054    cat /boot/grub/device.map >> $LOGFILE
3055    LogFile "-------------"
3056fi
3057if [ -r /etc/lilo.conf ]; then
3058    LogFile "-------------"
3059    LogFile "INFO: /etc/lilo.conf content"
3060    LogFile "-------------"
3061    cat /etc/lilo.conf >> $LOGFILE
3062fi
3063LogFile "Full fdisk info"
3064LogFile "---------------"
3065$FDISK -l >> $LOGFILE
3066LogFile "----------------"
3067LogFile "List of extra modules is:"
3068LogFile "$EXTRA_MODS"
3069LogFile "-------------"
3070
3071# Compute libata version
3072laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3073# If libata v2 is used then remove ide-generic as it will perturbate boot
3074if [ "`echo $MODULES | grep libata`" ]; then
3075    if [ "$laver" = "2" ]; then
3076        DENY_MODS="$DENY_MODS ide-generic"
3077        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3078        LogFile "-------------"
3079    fi
3080fi
3081
3082# Check for McAfee which disturbs the access to some files (tgz in articular)
3083if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3084    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3085    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3086    LogFile "WARNING: You have two options:"
3087    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3088    LogFile "WARNING:  - Disable the scanner during the backup"
3089fi
3090
3091# Check for ISO_CMD command
3092if [ ! -x $ISO_CMD ]; then
3093    LogFile "NOTE: No CD image (ISO file) utility found"
3094fi
3095
3096FLOPPY_WAS_MOUNTED=""
3097for mtpt in /media/floppy /mnt/floppy /floppy ; do
3098    if mount | grep -w $mtpt &> /dev/null ; then
3099        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3100        umount $mtpt
3101    fi
3102done
3103
3104#
3105# If we have a USB device we need to store info
3106# and remove it from the parameters line
3107#
3108if [ "$#" -ne "0" ] ; then
3109    if [ "$1" = "--usb" ] ; then
3110        shift
3111        USBDEVICE=$1
3112        if [ _"$USBDEVICE" = _"" ]; then
3113            Die "No USB device specified"
3114        fi
3115        shift
3116    fi
3117fi
3118
3119if [ "$#" -ne "0" ] ; then
3120    if [ "$1" = "--findkernel" ] ; then
3121        resk=`TryToFindKernelPath`
3122        # Avoids logfile content for mondo
3123        export MONDO_SHARE=""
3124        if [ "$resk" = "" ] ; then
3125            if [ $KERNEL_IS_XEN = "yes" ]; then
3126                echo "$xenkernelpath"
3127                LogFile "INFO: xenkernelpath = $xenkernelpath"
3128                MindiExit 0
3129            else
3130                MindiExit -1
3131            fi
3132        else
3133            echo "$resk"
3134            LogFile "INFO: kernelpath = $resk"
3135            MindiExit 0
3136        fi
3137    elif [ "$1" = "--locatedeps" ] ; then
3138        [ ! "$2" ] && Die "Please specify the binary to look at"
3139        LocateDeps $*
3140        # Avoids logfile content for mondo
3141        export MONDO_SHARE=""
3142        MindiExit $?
3143    elif [ "$1" = "--readalllink" ] ; then
3144        [ ! "$2" ] && Die "Please specify the binary to look at"
3145        # Avoids logfile content for mondo
3146        export MONDO_SHARE=""
3147        mr-read-all-link $2
3148        MindiExit $?
3149    elif [ "$1" = "--makemessage" ] ; then
3150        MakeMessageFile | cut -c1-80
3151        MindiExit 0
3152    elif [ "$1" = "--makemountlist" ] ; then
3153        [ ! "$2" ] && Die "Please specify the output file"
3154        MakeMountlist $2
3155        CheckMountlist $2
3156        # Avoids logfile content for mondo
3157        export MONDO_SHARE=""
3158        MindiExit $?
3159    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3160        echo "Mindi v$MINDI_VERSION"
3161        # Avoids logfile content for mondo
3162        export MONDO_SHARE=""
3163        MindiExit 0
3164    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3165        MONDO_TMP=$2
3166        # Change MINDI_TMP for the one provided by mondo
3167        # So that it can get back the built files
3168        if [ _"$MONDO_TMP" = _"" ]; then
3169            Die "MONDO_TMP is empty, aborting"
3170        fi
3171        if [ _"$MONDO_TMP" = _"/" ]; then
3172            Die "MONDO_TMP is /, aborting"
3173        fi
3174        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3175        rmdir $MINDI_TMP
3176        export MINDI_TMP=$MONDO_TMP
3177        mkdir -p $MINDI_TMP
3178
3179        # This is the scratch dir in mondo - subdir images
3180        MINDI_CACHE=$3
3181
3182        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3183        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3184       
3185###
3186### Sq-Modification...
3187### Attempt to locate kernel specific module path
3188### if module path is found then use it other wise use uname -r to set it...
3189###
3190        if [ $KERNEL_IS_XEN = "yes" ]; then
3191            LogAll "INFO: xenkernelpath = $xenkernelpath"
3192        fi
3193        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3194        if [ ! -d "/lib/modules/$kernelname" ]; then
3195           LogAll "WARNING: Module path for ${kernelpath} not found..."
3196           LogAll "         using running kernel\'s modules."
3197           kernelname=$KERVERRUN
3198        else
3199           LogAll "Using modules for kernel: ${kernelname}"
3200        fi
3201        LogAll "INFO: kernelname = $kernelname"
3202        LogAll "INFO: kernelpath = $kernelpath"
3203###
3204### end of Sq-Modification
3205###
3206        TAPEDEV=$5
3207        TAPESIZE=$6
3208        FILES_IN_FILELIST=$7
3209        USE_LZO=$8
3210        CDRECOVERY=$9
3211        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3212            IMAGE_DEVS=""
3213        else
3214            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3215        fi
3216        if [ "${11}" ] ; then
3217            LILO_OPTIONS=""
3218    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3219        fi
3220        LAST_FILELIST_NUMBER=${12}
3221        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3222        export MINDI_EXCLUDE_DEVS="${14}"
3223        USE_COMP="${15}"
3224        USE_LILO="${16}"
3225        USE_STAR="${17}"
3226        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3227        DIFFERENTIAL="${19}"
3228        USE_GZIP="${20}"
3229        NOT_BOOT="${21}"
3230        [ "$USE_COMP" = "" ] && USE_COMP=yes
3231        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3232        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3233        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3234        # MONDO_ROOT is the real scratchdir
3235        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3236        if [ _"$MONDO_ROOT" != _"" ]; then
3237            mkdir -p $MONDO_ROOT
3238        else
3239            Die "MONDO_ROOT is undefined"
3240        fi
3241    else
3242        LogScreen "Syntax: mindi (--custom ....)"
3243        MindiExit -1
3244    fi
3245fi
3246
3247if [ _"$MINDI_CACHE" != _"" ]; then
3248    rm -rf $MINDI_CACHE/* 2> /dev/null
3249    mkdir -p $MINDI_CACHE
3250fi
3251
3252[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3253
3254if [ _"$MONDO_SHARE" = _"" ]; then
3255    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3256    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3257    LogIt "BusyBox sources are available from http://www.busybox.net"
3258    LogIt "------------------------------------------------------------------------------"
3259else
3260    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3261fi
3262if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3263    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3264else
3265    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3266    MindiExit -1
3267fi
3268
3269for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3270    modinfo $i 2> /dev/null 1> /dev/null
3271    if [ $? -eq 0 ]; then
3272        modprobe $i 2>&1 > /dev/null
3273    fi
3274done
3275
3276KERN_DISK_MADE=""
3277
3278LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3279LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3280LogFile "NOT_BOOT = '$NOT_BOOT'"
3281if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3282    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3283    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3284    MakeMountlist $MINDI_TMP/mountlist.txt
3285    CheckMountlist $MINDI_TMP/mountlist.txt
3286    mkdir -p $MINDI_TMP/small-all/tmp
3287    cd "$MINDI_TMP/small-all"
3288    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3289    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3290    sleep 2
3291    LogIt "Done. Exiting."
3292    MindiExit 0
3293fi
3294
3295if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3296    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3297fi
3298
3299if [ "$kernelpath" = "" ] ; then
3300    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3301    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3302    read ch
3303    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3304        USE_OWN_KERNEL="yes"
3305    else
3306        USE_OWN_KERNEL="no"
3307    fi
3308    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3309        kernelpath=`TryToFindKernelPath`
3310        if [ "$kernelpath" = "" ] ; then
3311            echo -n "Please enter kernel path : "
3312            read kernelpath
3313        fi
3314    fi
3315fi
3316
3317echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3318[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3319
3320mountpoint=$MINDI_TMP/mountpoint.$$
3321PrepareDataDiskImages
3322
3323ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3324rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3325export ramdisk_size=$rds
3326
3327LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3328if [ "$ARCH" = "ia64" ] ; then
3329    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3330else
3331    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3332fi
3333
3334[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3335...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3336
3337if [ _"$MONDO_SHARE" = _"" ]; then
3338    ListImagesForUser
3339    OfferToMakeBootableISO
3340    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3341        OfferToMakeBootableUSB
3342    fi
3343    LogAll "Finished."
3344elif [ "$TAPEDEV" ] ; then
3345    if [ "$ARCH" != "ia64" ] ; then
3346        # We need to keep the img file as boot file for ia64 platform
3347        rm -f $MINDI_CACHE/{*img,*iso}
3348    else
3349        rm -f $MINDI_CACHE/*iso
3350    fi
3351    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3352        OfferToMakeBootableUSB
3353    fi
3354    OfferToMakeBootableISO
3355    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3356        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3357    else
3358        Die "Cannot find all.tar.gz, to be written to tape"
3359    fi
3360elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3361    OfferToMakeBootableUSB
3362else
3363    OfferToMakeBootableISO
3364fi
3365# cleanup
3366LogAll "INFO: $FRIENDLY_OUTSTRING"
3367for mtpt in $FLOPPY_WAS_MOUNTED ; do
3368    mount $mtpt
3369done
3370MindiExit 0
Note: See TracBrowser for help on using the repository browser.