source: branches/3.2/mindi/mindi @ 3248

Last change on this file since 3248 was 3248, checked in by bruno, 5 years ago
  • Moves the creation of the symlinks for directories on /bin, /sbin in TurnTgzIntoRdz? after mounting the FS so that it's done at the right place now.
  • Apply again a patch on mindi to detect correctly kernel version 3 and upper which had disappeared :-(
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 123.2 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3248 2014-02-26 09:46:25Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr stp garp"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp ptp_pch pps_core"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
258    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
259        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
260    else
261        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
262    fi
263    for included_item in $included_list ; do
264        if [ ! -e "$included_item" ] ; then
265            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
266            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
267            for ii in $sss ; do
268                [ -e "$ii" ] && AddKeyboardMappingFile $ii
269            done
270        else
271            AddKeyboardMappingFile $included_item
272        fi
273    done
274}
275
276
277CopyDependenciesToDirectory() {
278    local outdir incoming counter d found tdir
279    outdir=$1
280    mkdir -p $outdir
281    incoming=`ReadLine`
282    counter=0
283    while [ "$incoming" != "" ] ; do
284        # Non absolute file names should not arrive till here => skipped
285        if [ `echo "$incoming" | cut -c1` != '/' ]; then
286            LogAll "WARNING: Unable to handle $incoming"
287            incoming=`ReadLine`
288            continue
289        fi
290        # no parent directory of incoming should be a link, copy is not possible in that case
291        d=`dirname "$incoming"`
292        found="false"
293        while [ $d != "/" -a $found = "false" ]; do
294            [ -h "$d" ] && found="true"
295            d=`dirname "$d"`
296        done
297        if [ -d "$incoming" -a ! -h "$incoming" ]; then
298            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
299        elif [ -e "$incoming" ] && [ $found = "false" ]; then
300            if [ ! -h "$incoming" ]; then
301                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302            else
303                tdir=`dirname "$incoming"`
304                if [ ! -e "$outdir/$tdir" ]; then
305                    mkdir -p "$outdir/$tdir"
306                fi
307                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
308            fi
309            # Only uncompress modules if not using udevd
310            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
311                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
312            fi
313            [ -x "$outdir" ] && StripExecutable $outdir
314            counter=$(($counter+1))
315            LogProgress $counter $2
316        fi
317        incoming=`ReadLine`
318    done
319}
320
321
322CountItemsIn() {
323    local r
324    r=0
325    for q in $1 ; do
326        r=$(($r+1))
327    done
328    echo $r
329}
330
331
332DropOptimizedLibraries() {
333    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
334    filelist=$1
335    outdir=$2
336
337    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
338    if [ "$list_of_optimized_libraries" = "" ] ; then
339        return 0
340    fi
341    echo -en "Dropping i686-optimized libraries if appropriate"
342    for optimized_lib_name in $list_of_optimized_libraries ; do
343        echo -en "."
344        reason=""
345        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
346        echo "$vanilla_lib_name" >> $filelist
347        LogFile "INFO: Adding $vanilla_lib_name to filelist"
348        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
349        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
350
351        # This may return multiple files
352        for resolved in `mr-read-all-link $vanilla_lib_name`; do
353            LogFile "INFO: Adding as deps $resolved to filelist"
354            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355            if [ "$vanilla_resolved_name" != "$resolved" ]; then
356                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
357                rmdir $outdir$resolved > /dev/null 2> /dev/null
358                ln -sf $vanilla_resolved_name $outdir$resolved
359                LogFile "INFO: Excluding deps $resolved" 
360                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
361                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
362                echo "$vanilla_resolved_name" >> $filelist.tmp
363                mv -f $filelist.tmp $filelist
364            fi
365        done
366    done
367    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
368    mv -f $filelist.tmp $filelist
369    echo -e "$DONE"
370}
371
372
373FindAndAddUserKeyboardMappingFile() {
374    local r res mapfile mappath included_item included_list keyfile mp locale
375    LogAll "INFO: Analyzing your keyboard's configuration."
376    KEYDIR=/usr/lib/kbd
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
383    if [ ! -e "$KEYDIR" ] ; then
384        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
385        return 0
386    fi
387    if [ -e "/etc/sysconfig/keyboard" ] ; then
388        LogFile "INFO: Red Hat-style config detected."
389        keyfile=/etc/sysconfig/keyboard
390    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
391        LogFile "INFO: Slackware-style config detected."
392        keyfile=/etc/rc.d/rc.keymap
393    elif [ -e "/etc/rc.config" ] ; then
394        LogFile "INFO: Debian-style config detected."
395        keyfile=/etc/rc.config
396    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        mkdir -p $bigdir/tmp
399        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
400        KBDEPTH=0
401        mkdir -p $bigdir/etc/console
402        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
403        echo ""
404        echo -e "$DONE"
405        return 0
406    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
407        LogFile "INFO: Ubuntu-style config detected."
408        mkdir -p $bigdir/tmp
409        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
410            kbdfile="/etc/console-setup/boottime.kmap.gz"
411        else
412            kbdfile="/etc/console-setup/cached.kmap.gz"
413        fi
414        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
415        KBDEPTH=0
416        mkdir -p $bigdir/etc/console-setup
417        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
418        echo ""
419        echo -e "$DONE"
420        return 0
421    elif [ -e "/etc/rc.conf" ] ; then
422        LogFile "INFO: ArchLinux config detected."
423        keyfile=/etc/rc.conf
424    elif [ -e "/etc/conf.d/keymaps" ] ; then
425        LogFile "INFO: Gentoo-style config detected."
426        keyfile=/etc/conf.d/keymaps
427    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
428        LogFile "INFO: X11-style config detected."
429        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
430    else
431        LogFile "Searching for rc.config ..."
432        keyfile=`find /etc -name rc.config | head -n1`
433        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
434            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
435            return
436        else
437            LogFile "INFO: Found $keyfile"
438        fi
439    fi
440    if [ ! -e "$KEYDIR/keymaps" ] ; then
441        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
442        return
443    fi
444    LogFile "INFO: keyfile=$keyfile"
445    # For SLES we need to remove the .map.gz extension Cf #614
446    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
447    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
448    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
449    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
450    LogFile "INFO: locale=$locale"
451    #
452    # Process the keymaps dir once for all
453    # AddKeyboardMappingFile will use it recursively
454    #
455    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
456    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
457    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
458    # If we have multiple keymaps then log it !!
459    echo "$mp" | grep -q " " >> $LOGFILE
460    if [ $? -eq 0 ]; then
461        LogAll "WARNING: Multiple keymaps found: $mp"
462        LogFile "INFO: The following one will be used"
463    fi
464    for i in $mp ; do
465        mappath=$i
466        [ -e "$i" ] && [ ! -d "$i" ] && break
467    done
468    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
469        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
470    fi
471    LogFile "INFO: mappath = $mappath"
472    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
473        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
474        return
475    fi
476    LogAll "INFO: Adding the following keyboard mapping tables: "
477    mkdir -p $bigdir/tmp
478    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
479    KBDEPTH=0
480    AddKeyboardMappingFile $mappath
481    echo ""
482    echo -e "$DONE"
483    rm -f $MINDI_TMP/keymaps.find
484    return 0
485}
486
487
488FindLdlinux32Binary() {
489    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
490    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
491    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
492    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
495    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
496    if [ ! -e "$LDLINUXC32" ]; then 
497        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
498        LDLINUXC32=/tmp/idoesnthopefullyexist
499    else
500        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
501    fi
502}
503
504
505FindMboot32Binary() {
506    MBOOTC32=/usr/lib/syslinux/mboot.c32
507    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
508    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
513    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
514    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
515}
516
517FindIsolinuxBinary() {
518    ISOLINUX=/usr/lib/isolinux.bin
519    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
520    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
525    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
526    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
527}
528
529
530FindSpecificModuleInPath() {
531    local modpaths pwd line
532    pwd=`pwd`
533    cd /
534    if [ ! -e "$1" ] ; then
535        LogAll "WARNING: cannot search specific path '$1'"
536        return 1
537    fi
538    # Find all files and links (required for some VMWare VMs)
539    modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
540    echo "$modpaths"
541    cd "$pwd"
542}
543
544
545GenerateGiantDependencyList() {
546    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
547
548    echo -en "Analyzing dependency requirements"
549    outfile=$1
550    tempfile=$MINDI_TMP/$$.txt
551    incoming=`ReadLine`
552
553    > $tempfile
554    progress=0
555    res=0
556    noof_lines=$2
557    while [ "$incoming" != "" ] ; do
558        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
559            incoming=`ReadLine`
560            continue
561        fi
562        if [ "$incoming" = "LVMFILES:" ] ; then
563            break
564        fi
565        filelist=`GenerateListForFile "$incoming"`
566        r=$?
567        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
568        res=$(($res+$r))
569#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
570        for fname in $filelist ; do
571                [ "$fname" != "" ] && echo "$fname" >> $tempfile
572        done
573        progress=$(($progress+1))
574        LogProgress $progress $noof_lines
575        incoming=`ReadLine`
576    done
577    if  [ "$incoming" = "LVMFILES:" ] ; then
578        incoming=`ReadLine`
579        lvmversion=""
580        while [ "$incoming" != "" ] ; do
581            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
582                incoming=`ReadLine`
583                continue
584            fi
585            filelist=`GenerateListForFile "$incoming"`
586            for tool in $filelist ; do
587                lvmresolved=`readlink -f $tool`
588                if [ "$tool" = "$lvmresolved" ]; then
589                    echo "$tool" >> $tempfile
590                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
591                    if [ "$lvmversion" = "" ] ; then
592                        lvmversion=`$lvmresolved`
593                        echo "$lvmresolved" >> $tempfile
594                    fi
595                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
596                    if [ "$lvmversion" = "200" ]; then
597                        # pvdata and lvmcreate_initrd don't exist in LVM2
598                        case "$toolstripped" in
599                        "pvdata")
600                            continue
601                            ;;
602                        "lvmcreate_initrd")
603                            continue
604                            ;;
605                        esac
606                    fi
607                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
608                    if [ -e "$toolpath" ] ; then
609                        echo "$toolpath" >> $tempfile
610                        echo "$tool" >> $tempfile
611                    else
612                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
613                    fi
614                    if [ -e "$toolpath" ] ; then
615                        echo "$toolpath" >> $tempfile
616                        echo "$tool" >> $tempfile
617                    else
618                        echo "Where are your LVM-Tools? Couldn't find $tool"
619                    fi
620                else
621                    echo "$tool" >> $tempfile
622                fi
623            done
624            progress=$(($progress+1))
625            LogProgress $progress $noof_lines
626            incoming=`ReadLine`
627        done
628    fi
629    echo -en "$DONE\nMaking complete dependency list"
630
631    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
632    mv -f $tempfile.new $tempfile
633    > $outfile.pre
634    progress=0
635    noof_lines=`cat $tempfile | wc -l`
636    LogFile "---------------------------------"
637    LogFile "List of dependencies:             "
638    LogFile "---------------------------------"
639    for fname in `cat $tempfile` ; do
640        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
641        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
642        progress=$(($progress+1))
643        LogProgress $progress $noof_lines
644    done
645    if [ _"$MONDO_SHARE" != _"" ]; then
646        mkdir -p $bigdir/tmp
647        mkdir -p $bigdir/usr/bin
648        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
649            LogAll "\nINFO: Incorporating post-nuke tarball"
650            old_pwd=`pwd`
651            cd "$bigdir"
652            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
653            cd "$old_pwd"
654        fi
655        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
656            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
657        else
658            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
659            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
660            LogIt "       If Mindi was called by Mondo then send me a bug report."
661            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
662            LogIt "       Finally, run Mindi again."
663            Die "Odd."
664        fi
665        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
666        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
667            LogAll "\nINFO: Incorporating Network-related settings"
668            for r in NETFS-* ISO-PREFIX ; do
669                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
670                LogFile "INFO: Copying $r to ramdisk"
671            done
672        fi
673    fi
674    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
675    rm -f $tempfile $outfile.pre
676    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
677    return $res
678}
679
680
681GenerateListForFile() {
682    local files_found loc fname incoming i res
683    incoming="$1"
684    files_found=""
685    res=0
686
687    for fname in $incoming ; do
688        files_found="$files_found `LocateFile $fname`"
689    done
690
691    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
692}
693
694
695# Returns all disk devices which are part of a raid array
696GetAllRaidMembers() {
697    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
698}
699
700
701GetFileSizeList() {
702    local i
703    for i in `find $1 -type d -o -print` ; do
704        du -sk $i
705    done
706}
707
708
709# Check kernel filesystem capabilites for accessing initrd image
710# Could be ext2 FS (old mode) or initramfs (new mode)
711#
712# Interface definition:
713# param #1: absolute path to kernel image
714GetInitrdFilesystemToUse() {
715
716    # interface test: make sure we have one parameter
717    if [ $# -ne 1 ]; then
718        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
719    fi
720
721    # interface parameters
722    local lvKernelImage=$1
723
724    # local constants (filesystem magic strings)
725    local lcMagicCramfs="<3>cramfs: wrong magic"
726    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
727    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
728    local lcMagicInitfs="<6>checking if image is initramfs...|[<]6[>]Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
729
730    # local variables
731    local lvOffset
732    local lvScanRes
733    local lvUseFilesystem
734
735    # say where we are.
736    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
737
738    # verify that file exists
739    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
740
741    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
742    file $lvKernelImage 2>&1 | grep -q gzip
743    if [ $? -eq 0 ]; then
744        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
745        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
746    else
747        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
748        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
749        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
750        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
751        if [ $lvOffset -eq 0 ]; then
752            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
753            lvScanRes=$lcMagicInitfs
754        else
755            lvOffset=`expr $lvOffset / 2`
756            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
757            # scan again  kernel image
758            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
759        fi
760    fi
761
762    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
763    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
764        lvUseFilesystem="ext2fs"
765    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
766        lvUseFilesystem="ext3fs"
767    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
768        lvUseFilesystem="initramfs"
769    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
770        lvUseFilesystem="cramfs"
771    else
772        # In that case, we are most probably after 2.6.30 and use the supported initramfs
773        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
774        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
775        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
776        lvUseFilesystem="initramfs"
777    fi
778
779    # say what we are using
780    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
781
782    # return file system to use
783    echo "$lvUseFilesystem"
784
785}
786
787# Searches members of raid device
788# $1: raid device (/dev/md...)
789GetRaidDevMembers() {
790    if [ ! -f /etc/raidtab ]; then 
791        return
792    fi
793    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
794}
795
796
797ListAllPartitions() {
798    local res currline partition all_partitions ap_orig remaining i j
799
800    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
801    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
802    if [ -e "/vmfs/volumes" ]; then
803        # For VMWare ESX 3 get the device names of these volumes
804        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
805    fi
806    return
807}
808
809
810ListImagesForUser() {
811    local path fname
812    path=$MINDI_CACHE
813    echo -en "In the directory '$path' you will find the images:-\n"
814    for fname in `ls $path | grep -F mindi-` ; do
815        printf "%19s " $fname
816    done
817    echo " "
818}
819
820
821ListKernelModulePaths() {
822    local module_list module fname r kern
823    module_list="$MODULES"
824    # Remove unwanted modules from list
825    for i in $DENY_MODS; do
826        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
827        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
828    done
829###
830### Sq-Modification ... Use kernelname for module search path if specified
831###
832    if [ "${kernelname}" != "" ]
833    then
834        kern=${kernelname}
835    else
836        kern="$KERVERRUN"
837    fi
838    export KERVER=$kern
839###
840### Sq-Mod End
841###
842    # Get rid of duplicates, so that if a live kernel module also appears
843    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
844    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
845        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
846        if [ -z "$r" ]; then
847            if [ "`echo "$MODULES" | grep -w $module`" ]; then
848                r="[live module file not found]"
849            else
850                r="[extra module file not found]"
851            fi
852        else
853            [ -f "$r" ] && echo "$r"
854        fi
855        LogFile "INFO: module $module --> $r"
856    done
857    find /lib/modules/$kern/modules.* -type f 2> /dev/null
858}
859
860#
861# Critical function which computes all dependencies (dyn. lib.)
862# for a list of binaries
863#
864LocateDeps() {
865    local incoming fname deps
866    incoming="$*"
867    deps=""
868
869    for fname in $incoming ; do
870        if [ ! -e "$fname" ] ; then
871            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
872            if echo $fname | grep lvm &> /dev/null ; then
873                LogFile "          This warning only affects you if you are using LVM."
874                if echo "$MODULES" | grep lvm &> /dev/null ; then
875                    LogFile "          I think you are, so please take heed!"
876                else
877                    LogFile "          I don't think you are, so don't worry about it."
878                fi
879            fi
880        else
881            deps="$deps $fname" 
882        fi
883    done
884    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
885}
886
887
888# Give all symlinks recursively of a full path name
889ReadAllLink() {
890    file="$1"
891
892    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
893        # We need to normalise the path with .. in it
894        file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
895    done
896    echo "$file"
897    if [ ! -h $file ]; then
898        return 0
899    fi
900
901    link=`readlink $file`
902    d=`dirname $file`
903    # Is link a relative or full path name
904    fchar=`echo $link | cut -c1`
905    # If mother dir is a link print it
906    if [ -h "$d" ]; then
907        echo "$d"
908        d2=`readlink $d`
909        c2=`echo $d2 | cut -c1`
910        if [ "$c2" != "/" ]; then
911            if [ "$c2" != "." ]; then
912                d="/$d2"
913            else
914                d="$d/$d2"
915            fi
916        fi
917        echo "$d/`basename $file`"
918    fi
919    if [ "$fchar" != "/" ]; then
920        # Relative or local link
921        ReadAllLink "$d/$link" 
922    else
923        # Absolute path
924        ReadAllLink $link 
925    fi
926}
927
928
929LocateFile() {
930    local i j path fname_to_find location output resolved tmp stub cache_id loclist
931    fname_to_find="$1"
932    # It's an absolute path
933    j=`echo "$fname_to_find" | cut -c1`
934    if [ _"$j" = _"/" ]; then
935        dn=`dirname $fname_to_find`
936        # We suppose that the link is already included, just add the new file
937        if [ -h "$dn" ]; then
938            newdn=`readlink -f $dn`
939            bn=`basename $fname_to_find`
940            output="$newdn/$bn"
941        else
942            output="$fname_to_find"
943        fi
944        if [ -h "$output" ] ; then
945            output="`mr-read-all-link $output` $output"
946        fi
947        echo "$output"
948        return 0
949    fi
950    # It's not an absolute path
951    output=""
952    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
953    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
954        [ -h "$path" ] && continue
955        [ ! -e "$path/$fname_to_find" ] && continue
956        output="$path/$fname_to_find $output"
957        if [ -h "$path/$fname_to_find" ] ; then
958            output="`mr-read-all-link $path/$fname_to_find` $output"
959        fi
960    done
961    if [ "$output" = "" ] ; then
962        return 1
963    fi
964    echo "$output"
965    return 0
966}
967
968LogProgress() {
969    local i progress modres noof_lines
970 
971    progress=$1
972    noof_lines=$2
973
974    echo -en "\r\t\t\t\t\t\t\t\t"
975    i=$(($progress*100))
976    if [ $noof_lines -ne 0 ]; then
977        i=$(($i/$noof_lines))
978    else
979        i=0
980    fi
981    echo -en "$i"
982    echo -en "%"
983    modres=$(($progress%4))
984    [ "$modres" -eq "0" ] && echo -en "\t/"
985    [ "$modres" -eq "1" ] && echo -en "\t-"
986    [ "$modres" -eq "2" ] && echo -en "\t\\"
987    [ "$modres" -eq "3" ] && echo -en "\t|"
988}
989
990# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
991MakeMondoConfigFile() {
992    local outfile use_lzo use_comp use_star
993    outfile=$1
994    > $outfile
995    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
996    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
997    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
998    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
999    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1000    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1001    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1002    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1003    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
1004    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1005    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1006    echo "use-lzo $use_lzo" >> $outfile
1007    echo "use-gzip $use_gzip" >> $outfile
1008    echo "use-star $use_star" >> $outfile
1009    echo "use-lzma $use_lzma" >> $outfile
1010    echo "use-comp $use_comp" >> $outfile
1011    echo "datestamp `date`" >> $outfile
1012    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1026    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1027    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1028    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1029    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1030    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1031    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1032    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1033    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1034    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1035    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1036    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1037    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1038}
1039
1040# Get PV's for an LV
1041GetPVsForLV() {
1042  if [ -n "$1" ]; then
1043    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1044    if [ -z "$vg" ]; then
1045      return
1046    fi
1047    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1048  fi
1049}
1050
1051
1052MakeMountlist() {
1053    local mountlist all_partitions current_partition \
1054partition_size partition_format outstring partition_number \
1055partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1056absolute_partition old_partition_fmt current_lvolume uname skip
1057
1058    LogFile "------------------------------------"
1059    LogFile "Your raw fstab file looks like this:"
1060    LogFile "------------------------------------"
1061    cat $MY_FSTAB >> $LOGFILE
1062    LogAll "-----------------------------------"
1063    LogAll "Your mountlist will look like this:"
1064    LogAll "-----------------------------------"
1065
1066# mountlist(OUT)
1067    mountlist=$1
1068
1069# NB: partition = device
1070# NB: mountpt = where the device is mounted
1071
1072    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1073
1074    [ "$mountlist" != "" ] && rm -Rf $mountlist
1075    > $mountlist
1076    all_partitions=""
1077   
1078    if [ $LVM != "false" ]; then
1079        LogAll "INFO: Analyzing LVM..."
1080        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1081        if [ $? -ne 0 ]; then
1082            LVM="false"
1083        fi
1084        # Excluded LVs and GVs are not reported here
1085        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1086    fi
1087    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1088    for i in $IMAGE_DEVS ; do
1089        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1090    done
1091    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1092    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1093    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1094    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1095    for c_p in $all_partitions ; do
1096        # Skip fd/cd devices, network FS, cifs
1097        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1098        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1099        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1100            current_partition=`readlink -f $c_p`
1101            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1102                current_partition="$c_p"
1103            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1104                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1105                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1106            fi
1107            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1108        else
1109            current_partition="$c_p"
1110        fi
1111        [ "$c_p" = "none" ] && continue
1112        redhat_label=""
1113        label=""
1114        uuid=""
1115        absolute_partition=`readlink -f $c_p`
1116        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1117
1118        # set default in case we dont't find it
1119        str_to_find_fmt_with=$current_partition
1120
1121        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1122        # current_partition contains only first column of /etc/fstab
1123        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1124            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1125            actual_dev=""
1126
1127            # 1st try, findfs - the RHEL way of finding labels and their partitions
1128            if [ -x "/sbin/findfs" ]; then
1129                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1130            fi
1131   
1132            # 2nd try : blkid, the good way for all LABEL except swap
1133            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1134                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1135                # For LVM FS it will give a /dev/dm-# which should then be converted
1136                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1137                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1138                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1139                    for dev in `ls /dev/mapper/*`; do
1140                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1141                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1142                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1143                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1144                            break
1145                        fi
1146                    done
1147                fi
1148            fi
1149   
1150            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1151            # For LVM gives a /dev/mapper entry
1152            if [ "x$actual_dev" = "x" ]; then
1153                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1154            fi
1155   
1156            # 4th try, with vol_id
1157            # SWAP only
1158            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1159                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1160                for dev_swap in $list_swaps ; do
1161                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1162                    if [ "x$dev_exists" != "x" ]; then
1163                        actual_dev=$dev_swap
1164                        break;
1165                    fi
1166                done
1167            fi
1168
1169            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1170            # LABEL=SW-cciss/c0d0p3 (RDP)
1171            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1172            # SWAP only
1173            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1174                    skip=""
1175                    uname=$KERVERRUN
1176                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1177                    # 2.6.12 needs 16 (FC3)
1178                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1179                    # 2.6.19 and upper needs 1052
1180                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1181                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1182                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1183                    if [ $skip = "" ]; then
1184                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1185                    fi
1186                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1187                    do
1188                        # Location of the swap label for kernel 2.6
1189                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1190                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1191                            actual_dev=$try_dev
1192                        fi
1193                    done
1194            fi
1195
1196            # Check if one of all those tries has known success
1197            if [ "x$actual_dev" != "x" ]; then
1198                current_partition=$actual_dev
1199            else
1200                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1201            fi
1202        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1203        # current_partition contains only first column of /etc/fstab
1204        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1205            uuid=`echo "$current_partition" | cut -d'=' -f2`
1206            actual_dev=""
1207
1208            # 1st try, findfs - the RHEL way of finding labels and their partitions
1209            if [ -x "/sbin/findfs" ]; then
1210                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1211            fi
1212   
1213            # 2nd try : blkid, the good way for all UUID except swap
1214            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1215                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1216                # For LVM FS it will give a /dev/dm-# which should then be converted
1217                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1218                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1219                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1220                    for dev in `ls /dev/mapper/*`; do
1221                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1222                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1223                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1224                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1225                            break
1226                        fi
1227                    done
1228                fi
1229            fi
1230   
1231            # 3th try, with vol_id
1232            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1233                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1234                for dev in $list_dev ; do
1235                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1236                    if [ "x$dev_exists" != "x" ]; then
1237                        actual_dev=$dev
1238                        break;
1239                    fi
1240                done
1241            fi
1242
1243            # 4th try, with dumpuuid (VMWare only ?) for swap
1244            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1245                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1246                for dev in $list_dev ; do
1247                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1248                    if [ "x$dev_exists" != "x" ]; then
1249                        actual_dev=$dev
1250                        break;
1251                    fi
1252                done
1253            fi
1254
1255            # Check if one of all those tries has known success
1256            if [ "x$actual_dev" != "x" ]; then
1257                current_partition=$actual_dev
1258            else
1259                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1260            fi
1261        else
1262            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1263            # they use symlinks in fstab unrelated to what is shown in mount !
1264            if [ _"$partition_mountpt" = _"" ]; then
1265                # set default in case we dont't find it
1266                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1267                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1268                            str_to_find_fmt_with=$tmpp
1269                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1270                            break;
1271                        fi
1272                done
1273            fi
1274        fi
1275
1276        # Detects noauto partitions not mounted and exclude them
1277        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1278        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1279                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1280            continue
1281        fi
1282        # Detects bind partitions and exclude them
1283        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1284                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1285            continue
1286        fi
1287
1288        # Look for devices which have to be excluded
1289        skip=0
1290        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1291            l=""
1292            list_of_devices="`mr-read-all-link $current_partition`"
1293            for d in $list_of_devices; do
1294                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1295            done
1296
1297            # Remove PVs from LVs excluded
1298            l="$l `GetPVsForLV $current_partition`"
1299
1300            # We want a single unique list
1301            list_of_devices="`echo $l | sort -u`"
1302
1303            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1304                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1305                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1306                    skip=1
1307                    continue
1308                fi
1309            done
1310        fi
1311        if [ $skip -eq 1 ]; then
1312            continue
1313        fi
1314
1315        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1316        # Detects iso9660 ISO images and exclude them
1317        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1318                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1319            continue
1320        fi
1321        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1322        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1323        # the former is then a link to the latter, so we test whether
1324        # $current_partition is actually such a link or not and set
1325        # $current_lvolume accordingly. On Debian you may find more than one answer
1326        # so we remove the one corresponding to /dev/.static
1327        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1328        # principle is the same and we need to find the link to it as well.
1329        # Note that $current_lvolume may well be an
1330        # ordinary device. It is just to make sure that we feed the right value
1331        # into any of the LVM tools if possible.
1332
1333        current_lvolume="$current_partition"
1334        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1335            # .static dir are a Debian specificity
1336            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1337            echo $current_lvolume | grep -q ' '
1338            if [ $? -eq 0 ]; then
1339                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1340            fi
1341            # if it's not found, it may well be a real device such as a multipath one
1342            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1343            if [ _"$current_lvolume" = _"" ]; then
1344                current_lvolume="$current_partition"
1345            fi
1346        fi
1347        #
1348        # End of LVM device style variation code (other than $current_lvolume).
1349
1350        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1351            # Size computed via LVM not directly
1352            partition_size="lvm"
1353        else
1354            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1355            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1356            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1357                # Skip swap files
1358                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1359                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1360                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1361                [ "$partition_format" != "swap" ] && partition_format="swap"
1362                if [ "$partition_size" = "" ] ; then
1363                    totalsize=0
1364                    items=0
1365                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1366                        totalsize=$(($totalsize+$i))
1367                        items=$(($items+1))
1368                    done
1369                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1370                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1371                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1372                fi
1373            else
1374                partition_size=`SizeOfPartition $current_partition`
1375            fi
1376        fi
1377        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1378        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1379        if [ "$partition_mountpt" = "" ] ; then
1380            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1381                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1382                    partition_mountpt="raid"
1383                    partition_format="raid"
1384                else
1385                    partition_mountpt="lvm"
1386                    partition_format="lvm"
1387                fi
1388            fi
1389        fi
1390        psz=$partition_size
1391        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1392        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1393        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1394            partition_mountpt="image"
1395            old_partition_fmt=$partition_format
1396            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1397            partition_size=$(($partition_size+1)); # just in case
1398            if [ "$partition_format" = "Linux" ] ; then
1399                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1400                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1401                partition_format=$old_partition_fmt
1402            fi
1403        fi
1404
1405        if [ ! "$partition_mountpt" ] ; then
1406            LogFile "------- $FDISK -l $qq log ------------"
1407            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1408                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1409                [ "$partition_format" ] && break
1410            done
1411            LogFile "------- $FDISK log end ------------"
1412            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1413                partition_format="compaq"
1414            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1415                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1416                continue
1417            fi
1418        fi
1419        if [ "$redhat_label" ]; then
1420            label="$redhat_label"
1421        elif [ "$uuid" ]; then
1422            label="$uuid"
1423        fi
1424        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1425        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1426        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1427        if [ "$current_partition" = "" ] ; then
1428            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1429        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1430            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1431                partition_mountpt=raid
1432                partition_format=raid
1433                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1434                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1435            else
1436                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1437            fi
1438        elif [ "$partition_format" = "" ] ; then
1439            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1440        elif [ "$partition_size" = "" ] ; then
1441            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1442        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1443            continue
1444        else
1445            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1446                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1447                partition_format="vfat"
1448            fi
1449            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1450            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1451        fi
1452    done
1453    LogAll "-----------------------------------" 
1454}
1455
1456CheckMountlist() {
1457    local file=$1
1458    # Coherency verification
1459    ML01=`cat $file | wc -l`
1460    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1461    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1462    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1463    if [ "$ML01" -ne "$ML1" ]; then
1464        LogFile "--------------------------------------------"
1465        LogAll "WARNING: Duplicate device entry in mountlist"
1466        LogFile "--------------------------------------------"
1467    fi
1468    if [ "$ML02" -ne "$ML2" ]; then
1469        LogFile "--------------------------------------------"
1470        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1471        LogFile "------------------------------------------------"
1472    fi
1473}
1474
1475OfferToMakeBootableISO() {
1476    local i old_pwd
1477    if [ -z "$ISO_CMD" ]; then
1478        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1479        return
1480    fi
1481    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1482        echo -en "Shall I make a bootable CD image? (y/[n]) "
1483        read i
1484        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1485    fi
1486    rm -Rf $MINDI_TMP/iso
1487    mkdir -p $MINDI_TMP/iso/{images,archives}
1488    LogFile "INFO: mindi_lib = $MINDI_LIB"
1489    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1490    for i in memdisk memtest.bin memtest.img ; do
1491        j=$MINDI_LIB/$i
1492        k=$MINDI_TMP/iso
1493        if [ -e "$j" ] ; then
1494            LogAll "INFO: Copying $j to $k"
1495            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1496            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1497            if [ _"$MONDO_SHARE" != _"" ]; then 
1498                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1499            fi
1500        fi
1501    done
1502    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1503    if [ $KERNEL_IS_XEN = "yes" ]; then
1504        FindMboot32Binary
1505        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1506        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1507    fi
1508    # Useful for syslinux 5.x
1509    FindLdlinux32Binary
1510    if [ -e $LDLINUXC32 ]; then
1511        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1512    fi
1513    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1514    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1515
1516    if [ _"$MONDO_SHARE" != _"" ]; then 
1517        if [ $KERNEL_IS_XEN = "yes" ]; then
1518            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/iso/xen.gz). Did you run out of disk space?"
1519            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/iso/mboot.c32). Did you run out of disk space?"
1520        fi
1521        if [ -e $LDLINUXC32 ]; then
1522            cp $LDLINUXC32 $MONDO_ROOT/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/iso/ldlinux.c32. Did you run out of disk space?"
1523        fi
1524        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1525        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1526    fi
1527    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1528    if [ "$ARCH" != "ia64" ] ; then
1529        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1530    fi
1531    old_pwd=`pwd`
1532    cd "$MINDI_TMP/iso"
1533    if [ "$ARCH" != "ia64" ] ; then
1534        if [ _"$MONDO_SHARE" != _"" ]; then 
1535            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1536            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1537                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1538            fi
1539            if [ $KERNEL_IS_XEN = "yes" ]; then
1540                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1541            fi
1542            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1543        fi
1544        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1545    else
1546        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1547    fi
1548    if [ "$?" -ne "0" ] ; then
1549        LogFile "----------- $ISO_CMD's errors --------------"
1550        LogAll "$ISO_CMD returned the following errors:"
1551        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1552        LogAll "ERROR: Failed to create ISO image."
1553    else
1554        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1555    fi
1556    rm -f $MINDI_TMP/mkisofs.log
1557    cd "$old_pwd"
1558}
1559
1560
1561OfferToMakeBootableUSB() {
1562    local i
1563    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1564        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1565        read i
1566        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1567        if [ "$USBDEVICE" = "" ]; then
1568            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1569            read dev
1570            USBDEVICE=$dev
1571        fi
1572        echo "WARNING: This will erase all content on $USBDEVICE"
1573        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1574        read i
1575        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1576    fi
1577    rm -Rf $MINDI_TMP/usb
1578    mkdir -p $MINDI_TMP/usb
1579    USBPART="${USBDEVICE}1"
1580
1581    echo -en "Transforming $USBDEVICE in a Bootable device " 
1582    echo -en "."
1583    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1584    LogFile "INFO: Checking $USBDEVICE"
1585    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1586    if [ $? -ne 0 ]; then
1587        LogAll "ERROR: Unable to access $USBDEVICE"
1588        LogAll "       Make sure your USB device is plugged in"
1589        MindiExit -1
1590    fi
1591    echo -en "."
1592    # Some distro do auto mount at that point (Ubuntu)
1593    LogFile "INFO: Unmounting $USBPART just in case"
1594    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1595    # If your key has no MBR it may cause an issue
1596    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1597    if [ -r $MBRFILE ]; then
1598        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1599        dd if=$MBRFILE of=$USBDEVICE
1600    else
1601        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1602        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1603    fi
1604    LogFile "INFO: Preparing $USBDEVICE"
1605    cat > $MINDI_TMP/fdisk.txt << EOF
1606d
1607d
1608d
1609d
1610n
1611p
16121
1613
1614
1615t
1616b
1617a
16181
1619w
1620EOF
1621    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1622    if [ $? -ne 0 ]; then
1623        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1624        LogAll "       Make sure your USB device is plugged in"
1625        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1626        MindiExit -1
1627    fi
1628    LogFile "fdisk build file"
1629    LogFile "----------------"
1630    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1631    LogFile "----------------"
1632    rm -f $MINDI_TMP/fdisk.txt
1633    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1634    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1635    echo -en "."
1636    # Calling kpartx in case devices were not created
1637    if [ -x "/sbin/kpartx" ]; then
1638        /sbin/kpartx -a $USBDEVICE
1639    fi
1640    # Some distro do auto mount at that point (Ubuntu)
1641    LogFile "INFO: Unmounting $USBPART just in case again"
1642    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1643    echo -en "."
1644    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1645    if [ "`which dmsetup`" != "" ]; then
1646        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1647        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1648            LogFile "INFO: Removing $block_id from device mapper."
1649            sleep 1
1650            dmsetup remove $block_id
1651        fi
1652    fi
1653    echo -en "."
1654    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1655    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1656    if [ $? -ne 0 ]; then
1657        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1658        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1659        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1660        MindiExit -1
1661    fi
1662    echo -en "."
1663    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1664    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1665    if [ $? -ne 0 ]; then
1666        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1667        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1668        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1669        MindiExit -1
1670    fi
1671    echo -en "."
1672    mkdir -p $MINDI_TMP/usb/images
1673    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1674    echo -en "."
1675    LogFile "INFO: mindi_lib = $MINDI_LIB"
1676    for i in memdisk memtest.bin memtest.img ; do
1677        j=$MINDI_LIB/$i
1678        k=$MINDI_TMP/usb
1679        if [ -e "$j" ] ; then
1680            LogIt "INFO: Copying $j to $k"
1681            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1682            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1683        fi
1684    done
1685    echo -en "."
1686    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1687    echo -en "."
1688    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1689    echo -en "."
1690    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1691    echo -en "."
1692    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1693    echo -en "."
1694    LogAll "----------- syslinux's conf --------------"
1695    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1696    LogAll "------------------------------------------"
1697    umount $MINDI_TMP/usb
1698    if [ "$ARCH" != "ia64" ] ; then
1699        syslinux -v 2>&1 | grep -q 4.02
1700        if [ $? -eq 0 ]; then
1701            # This buggy version of syslinux requires a call to --stupid and not -s
1702            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1703            res=$?
1704        else
1705            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1706            res=$?
1707        fi
1708        if [ $res -ne 0 ] ; then
1709            LogAll "----------- syslinux's errors --------------"
1710            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1711            LogAll "------------------------------------------"
1712            LogIt "ERROR: Failed to create USB image."
1713        else
1714            echo -e "$DONE"
1715            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1716        fi
1717        rm -f $MINDI_TMP/syslinux.log
1718    else
1719        LogAll "ERROR: No USB boot support for ia64"
1720        MindiExit -1
1721    fi
1722}
1723
1724
1725MakeMessageFile() {
1726   
1727    if [ -x "/bin/lsb_release" ]; then
1728        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1729    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1730        DESC="Arch Linux"
1731        if [ -r /var/log/pacman.log ]; then
1732            # there are no releases but we can get the last system upgrade
1733            # Output example:   Arch Linux [2011-03-03 01:39]
1734            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1735        fi
1736    elif [ -r /etc/issue.net ]; then
1737        DESC=`head -1 /etc/issue.net`
1738    elif [ -r /etc/issue ]; then
1739        DESC=`head -1 /etc/issue`
1740    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1741        # For pb >= 0.9.8
1742        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1743    else
1744        DESC="Unknown desc"
1745    fi
1746    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1747    if [ _"$MONDO_SHARE" != _"" ]; then
1748        if [ "$CDRECOVERY" != "yes" ] ; then
1749            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1750                echo -en "Press <enter> to continue.\n"
1751            elif [ ! "$MINDI_TMP" ] ; then
1752                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1753                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1754                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1755                fi
1756            else
1757                echo -en "$BOOT_MEDIA_MESSAGE"
1758            fi
1759        else
1760            echo -en "\
1761To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1762CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1763        fi
1764    fi
1765
1766    # Also create the other help screens
1767    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1768    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1769    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1770}
1771
1772
1773MakeBootConfFile() {
1774    local options i ooo
1775    options=""
1776    # Type of boot file (elilo or syslinux/isolinux)
1777    type=$1
1778    if [ "$type" = "elilo" ]; then
1779        sep="="
1780    else
1781        sep=" "
1782    fi
1783
1784    # Generic header for conf file
1785    if [ "$type" != "elilo" ] ; then
1786        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1787    else
1788        echo -en "prompt\n"
1789    fi
1790
1791    # Compute which default option to boot from
1792    if [ "$CDRECOVERY" = "yes" ] ; then
1793        echo -en "default${sep}RESTORE\n"
1794    # In case it's mondoarchive
1795    elif [ _"$MONDO_SHARE" != _"" ]; then
1796        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1797            echo -en "default${sep}iso\n"
1798        else
1799            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1800        fi
1801    else
1802        echo -en "default${sep}expert\n"
1803    fi
1804
1805    # Handle timeout
1806    if [ "$CDRECOVERY" != "yes" ] ; then
1807        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1808    else
1809        echo -en "timeout${sep}10000\n"
1810    fi
1811    echo -en "\n"
1812
1813    # prepare which labels will be generated
1814    if [ "$CDRECOVERY" = "yes" ] ; then
1815        options="RESTORE expert"
1816    else
1817        if [ _"$MONDO_SHARE" != _"" ]; then
1818            options="interactive expert compare iso nuke isonuke"
1819        else
1820            options="expert"
1821        fi
1822    fi
1823
1824    # Generate rest of conf file
1825    for i in $options ; do
1826        ooo=$i
1827        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1828        if [ "$type" = "elilo" ]; then
1829            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1830        else
1831            ps="/"
1832            if [ "$type" = "syslinux" ]; then
1833                ps=""
1834            fi
1835            if [ $KERNEL_IS_XEN = "no" ]; then
1836                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1837            else
1838                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1839            fi
1840        fi
1841        echo -en "$outstr"
1842    done
1843    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1844        if [ "$type" = "elilo" ]; then
1845            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1846            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1847        else
1848            ps="/"
1849            if [ "$type" = "syslinux" ]; then
1850                ps=""
1851            fi
1852            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1853            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1854        fi
1855    fi
1856}
1857
1858
1859PrepareBootDiskImage_LILO() {
1860    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1861    imagesdir=$MINDI_CACHE
1862    kernelpath=$1
1863
1864    retval=0
1865
1866    old_pwd=`pwd`
1867    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1868    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1869    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1870    echo -en "..."
1871    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1872    mkdir -p $mountpoint
1873    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1874    LogFile "Creating vfat filesystem on $imagefile" 
1875    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1876    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1877
1878    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1879    mkdir -p $mountpoint/etc
1880    liloconf=$mountpoint/elilo.conf
1881
1882    MakeBootConfFile elilo > $liloconf
1883
1884    # Copy it so that CD-ROM menu entry is satisfied
1885    mountefi=0
1886    df -T | grep /boot/efi | grep -q vfat
1887    if [ $? -ne 0 ]; then
1888        mount /boot/efi
1889        if [ $? -ne 0 ]; then
1890            echo "You have to mount your EFI partition when using mindi"
1891            MindiExit -1
1892        fi
1893        mountefi=1
1894    fi
1895    el=`find /boot/efi -name elilo.efi`
1896    cp $el $mountpoint
1897    cp $liloconf $mountpoint
1898    if [ $mountefi -eq 1 ]; then
1899        umount /boot/efi 2>&1 > /dev/null
1900    fi
1901
1902    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1903    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1904    if [ "$?" -ne "0" ] ; then
1905        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1906        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1907        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1908        rm -f $MINDI_TMP/mtpt.$$
1909        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1910        retval=$(($retval+1))
1911    fi
1912    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1913
1914    mkdir -p $mountpoint/tmp
1915    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1916        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1917    fi
1918
1919    # copy the kernel across
1920    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1921    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1922    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1923    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1924    if [ "$?" -ne "0" ] ; then
1925        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1926        du -sk $mountpoint/* >> $LOGFILE
1927        LogFile "--- end of list of files ---"
1928        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1929        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1930        cd "$old_pwd"
1931        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1932        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1933    #   losetup /dev/loop0 -d
1934        [ "$imagefile" != "" ] && rm -f $imagefile
1935        LogIt "ERROR: Sorry, your kernel is too big for your image"
1936        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1937        return 0
1938    fi
1939    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1940    LogFile "INFO: Free space left on image = $free_space KB"
1941    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1942    # make it bootable
1943    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1944    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1945    if [ "$KERN_DISK_MADE" ] ; then
1946        LogFile "INFO: Not running LILO. It's not that kind of disk."
1947    fi
1948
1949    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1950    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1951    echo -en "..."
1952    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1953    if [ "$retval" -eq "0" ] ; then
1954        echo -en "...$DONE\n"
1955        if [ "$KERN_DISK_MADE" ] ; then
1956            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1957        fi
1958    else
1959        echo -en "...failed\n"
1960        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1961        [ "$imagefile" != "" ] && rm -f $imagefile
1962    fi
1963    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1964    return $retval
1965}
1966
1967
1968PrepareBootDiskImage_ISOLINUX() {
1969    local imagesdir dev imagefile fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1970    imagesdir=$MINDI_CACHE
1971    kernelpath=$1
1972    do_boot_root_thingy=""
1973    retval=0
1974
1975    old_pwd=`pwd`
1976    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1977    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1978    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1979    echo -en "..."
1980    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1981    mkdir -p $mountpoint
1982    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1983    LogFile "INFO: Creating vfat filesystem on $imagefile"
1984    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1985    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1986    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1987
1988    # Only move it now to its final destination and use it now
1989    mv $imagefile $imagesdir
1990    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1991
1992    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1993
1994    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1995    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1996    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1997    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1998    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1999    if [ "$?" -ne "0" ] ; then
2000        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
2001        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
2002        LogAll "       Please unload some of your modules and try again."
2003        rm -f $MINDI_TMP/mtpt.$$
2004        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
2005        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2006        retval=$(($retval+1))
2007    fi
2008
2009    mkdir -p $mountpoint/tmp
2010    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
2011        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
2012    fi
2013
2014    # copy the kernel across
2015    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2016    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2017    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2018         
2019    retval=0
2020    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2021    retval=$?
2022    if [ $KERNEL_IS_XEN = "yes" ]; then
2023        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2024        let retval+=$?
2025    fi
2026 
2027    if [ "$retval" -ne "0" ] ; then
2028        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2029        du -sk $mountpoint/* >> $LOGFILE
2030        LogFile "--- end of list of files ---"
2031        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2032        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2033        cd "$old_pwd"
2034        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2035        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2036
2037        LogIt "ERROR: Sorry, your kernel is too big for your image"
2038        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2039    fi
2040    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2041    LogFile "INFO: Free space left on image = $free_space KB"
2042    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2043
2044    # make it bootable
2045    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2046    mkdir -p $mountpoint/etc
2047    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2048    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2049    echo -en "..."
2050    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2051
2052    if [ "$retval" -eq "0" ] ; then
2053        echo -en "...$DONE\n"
2054        if [ "$KERN_DISK_MADE" ] ; then
2055            [ "$imagefile" != "" ] && rm -f $imagefile
2056            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2057        fi
2058    else
2059        echo -en "...failed\n"
2060        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2061        [ "$imagefile" != "" ] && rm -f $imagefile
2062    fi
2063    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2064    return $retval
2065}
2066
2067
2068ParseModprobeForIncludes() {
2069local MODPROBE_CONF mpincfile includes include
2070
2071MODPROBE_CONF=/etc/modprobe.conf
2072mpincfile=$1
2073touch $mpincfile
2074if [ -a $MODPROBE_CONF ]; then
2075    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2076    if [ -n "$includes" ]; then
2077        for include in $includes
2078        do
2079            if [ -a "$include" ]; then
2080                echo $include >> $mpincfile
2081            fi
2082        done
2083    fi
2084fi
2085}
2086
2087
2088PrepareDataDiskImages() {
2089    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2090
2091    imagesdir=$MINDI_CACHE
2092    rm -f $imagesdir/mindi.iso
2093    needlist=$MINDI_TMP/what-we-need.txt
2094    bigdir=$MINDI_TMP/bigdir
2095    mkdir -p $bigdir/usr/bin
2096    mkdir -p $bigdir/usr/sbin
2097    includefile=$MINDI_TMP/$$.includefile.txt
2098
2099    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2100    if [ -e "$DEPLIST_FILE" ]; then
2101        lfiles="$DEPLIST_FILE $lfiles"
2102    fi
2103    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2104    ParseModprobeForIncludes $includefile
2105    lines=$(($lines+`cat $includefile | wc -l`))
2106    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2107    res=$?
2108    rm -f $includefile
2109    ListKernelModulePaths >> $needlist
2110    if [ "$res" -ne "0" ] ; then
2111        Die "You have $res files present in dependency list\nbut absent from filesystem."
2112    fi
2113    FindAndAddUserKeyboardMappingFile
2114    mkdir -p $bigdir/tmp
2115    if [ _"$MONDO_SHARE" != _"" ]; then
2116        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2117        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2118    fi
2119    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2120    DropOptimizedLibraries $needlist $bigdir
2121    echo -en "Assembling dependency files"
2122
2123    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2124
2125    # also copy io.sys and msdos.sys, if we can find them
2126    for i in `mount | cut -d' ' -f3` ; do
2127        for j in io.sys msdos.sys ; do
2128            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2129        done
2130    done
2131
2132    # master boot record, too
2133    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2134    if [ "$i" ] ; then
2135        LogAll "INFO: Backing up $i's MBR"
2136        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2137        sleep 1
2138        sync
2139        j=$i
2140        [ -h "$j" ] && j=`readlink -f $j`
2141        LogAll "INFO: Creating /dev/boot_device ($j)"
2142        mkdir -p $bigdir/dev
2143        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2144    fi
2145
2146    old_pwd=`pwd`
2147    cd "$bigdir"
2148
2149    # Get terminfo content
2150    ti="usr/share/terminfo/l"
2151    if [ -d /$ti ]; then
2152        mkdir -p $ti
2153        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2154    fi
2155    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2156        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2157        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2158    fi
2159    if [ -d "/lib/dev-state" ]; then 
2160        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2161    fi
2162    cd "$old_pwd"
2163    echo -e "$DONE"
2164    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2165    MakeMountlist $MINDI_TMP/mountlist.txt
2166    CheckMountlist $MINDI_TMP/mountlist.txt
2167    mkdir -p $bigdir/tmp
2168    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2169    if [ _"$MONDO_SHARE" != _"" ]; then
2170        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2171    fi
2172    if [ $LVM != "false" ]; then
2173        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2174        if [ "$?" -ne "0" ]; then
2175            LVM="false"
2176            rm -f $bigdir/tmp/i-want-my-lvm
2177        else
2178            LogFile "Your i-want-my-lvm file content is:"
2179            LogFile "-----------------------------------"
2180            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2181            LogFile "-----------------------------------"
2182        fi
2183    fi
2184    LogFile "Your mountlist.txt file content is:"
2185    LogFile "-----------------------------------"
2186    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2187    LogFile "-----------------------------------"
2188
2189    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2190    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2191    if [ _"$MONDO_SHARE" != _"" ]; then
2192        for q in filelist.full.gz biggielist.txt ; do
2193            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2194            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2195        done
2196    fi
2197
2198    echo -en "Tarring and zipping the data content..."
2199    size_of_all_tools=`du -sk $bigdir | cut -f1`
2200    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2201    LogFile "Size of the data content"
2202    LogFile "------------------------"
2203    du -sk $imagesdir/*gz >> $LOGFILE
2204    LogFile "------------------------"
2205    echo -e "$DONE"
2206
2207    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2208    rm -rf $bigdir
2209    rm -f $needlist
2210}
2211
2212
2213ProcessLDD() {
2214    local incoming f d nd bd bnd
2215    read incoming
2216    while [ "$incoming" != "" ]; do
2217        # We take the full path name of the dyn. lib. we want
2218        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2219        for f in $incoming ; do
2220            # echo modified file name if one of the parent dir is a link
2221            # by replacing the original dirname by the destination of the link
2222            d="`dirname $f`"
2223            found="false"
2224            while [ "$d" != "/" ]; do
2225                if [ -h "$d" ]; then
2226                    nd=`readlink -f $d`
2227                    bd=`basename $d`
2228                    bnd=`basename $nd`
2229                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2230                    echo $d
2231                fi
2232                d="`dirname $d`"
2233            done
2234
2235            echo "$f"
2236            echo "`ReadAllLink $f`"
2237        done
2238        read incoming
2239    done
2240}
2241
2242
2243Prompt() {
2244    echo -en "$1"
2245    read line
2246}
2247
2248
2249ReadLine() {
2250    local i incoming
2251    read incoming
2252    i=0
2253    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2254        i=$(($i+1))
2255        read incoming
2256    done
2257    echo "$incoming"
2258}
2259
2260
2261SizeOfPartition() {
2262    local devpath drive res stub
2263    device=$1
2264    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2265        Die "Cannot find $device's size - is your /etc/fstab sane?"
2266    fi
2267    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2268        res=`SizeOfRaidPartition $device`
2269        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2270        echo "$res"
2271        return 0
2272    fi
2273    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2274    res=`$FDISK -s $device 2>> $LOGFILE`
2275    # end patch
2276    # take only the first in case of multiple mount (cifs, nfs, ...)
2277    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2278    [ "$res" = "" ] && res="-1"
2279    echo $res
2280    return 0
2281}
2282
2283
2284SizeOfRaidPartition() {
2285    local real_dev smallest_size silly tmp
2286
2287    silly=999999999
2288    smallest_size=$silly
2289
2290    for real_dev in `GetRaidDevMembers $1` ; do
2291        tmp=`SizeOfPartition $real_dev`
2292        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2293    done
2294
2295    if [ "$smallest_size" = "$silly" ] ; then
2296        echo "-1"
2297        return 1
2298    else
2299        echo "$smallest_size"
2300        return 0
2301    fi
2302}
2303
2304
2305StripExecutable()
2306{
2307    local tmpfile
2308
2309    tmpfile=$MINDI_TMP/stripped.$$.dat
2310    [ -d "$1" ] || [ -h "$1" ] && return
2311    cp -f $1 $tmpfile 2>> $LOGFILE
2312    strip $tmpfile 2> /dev/null
2313    if [ "$?" -eq "0" ] ; then
2314        cp -f $tmpfile $1 2>> $LOGFILE
2315        LogFile "INFO: Stripped binary $2"
2316    fi
2317    rm -f $tmpfile
2318}
2319
2320KernelVer() {
2321        local fkern_ver fname
2322
2323        fname=$1
2324        file $fname | grep -q gzip
2325        if [ "$?" -eq "0" ] ; then
2326            # Used by ia64
2327            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2328        else
2329            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2330        fi
2331        echo "$fkern_ver"
2332}
2333
2334
2335# WARNING: This function should just echo the final result !!!
2336#
2337TryToFindKernelPath() {
2338    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2339
2340    we_want_version=$KERVERRUN
2341    possible_kernels=""
2342    duff_kernels=""
2343    output=""
2344   
2345    if [ "$ARCH" = "ia64" ] ; then
2346       root="/boot/efi/efi"
2347    else
2348       root="/"
2349    fi
2350    # See if we're booted from a Xen kernel
2351    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2352    if [ -f /proc/xen/capabilities ]; then
2353        # It's a Xen kernel
2354        KERNEL_IS_XEN="yes"
2355        LogFile "INFO: It's a Xen kernel..."
2356    fi
2357
2358    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2359        [ ! -e "$fname" ] && continue
2360        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2361        fkern_ver=`KernelVer $fname`
2362        [ "$fkern_ver" = "" ] && continue
2363        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2364        [ -f "$fname" ] || continue
2365        [ -h "$fname" ] && continue
2366        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2367        file $fname | grep -q gzip
2368        if [ "$?" -eq "0" ] ; then
2369            # Used by ia64
2370            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2371                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2372                duff_kernels="$fname $duff_kernels"
2373            else
2374                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2375                possible_kernels="$fname $possible_kernels"
2376            fi
2377        else
2378            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2379                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2380                duff_kernels="$fname $duff_kernels"
2381            else
2382                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2383                possible_kernels="$fname $possible_kernels"
2384            fi
2385        fi
2386    done
2387    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2388        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2389    fi
2390    if [ ! "$possible_kernels" ] ; then
2391        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2392        possible_kernels="$duff_kernels"
2393        if [ ! "$possible_kernels" ] ; then
2394            LogAll "INFO: Sorry, no duff kernels either"
2395        else
2396            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2397            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2398        fi
2399    fi
2400    if [ $KERNEL_IS_XEN = "yes" ]; then
2401        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2402        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2403    fi
2404    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2405    noof_kernels=`CountItemsIn "$possible_kernels"`
2406    if [ "$noof_kernels" -eq "0" ] ; then
2407        LogAll "Could not find your kernel."
2408        if [ -e "/boot/vmlinuz" ] ; then
2409            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2410            output=/boot/vmlinuz
2411        else
2412            output=""
2413        fi
2414    elif [ "$noof_kernels" -eq "1" ] ; then
2415        kp=`echo "$possible_kernels" | sed s/' '//`
2416        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2417        output="$kp"
2418    else
2419        for i in $possible_kernels ; do
2420            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2421                LogAll "INFO: OK, I used my initiative and found that "
2422                LogAll "INFO: $i is probably your kernel. "
2423                output="$i"
2424                break
2425            fi
2426        done
2427        if [ ! -n "$output" ]; then
2428            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2429                output=/boot/vmlinuz
2430                LogFile "INFO: Schlomo, this one's for you."
2431            else
2432                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2433                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2434                LogFile "INFO: $possible_kernels"
2435                output=""
2436            fi
2437        fi
2438    fi
2439    if [ $KERNEL_IS_XEN = "yes" ]; then
2440        if [ "$noof_xenkernels" -eq "0" ]; then
2441            xenkernelpath=""
2442        elif [ "$noof_xenkernels" -eq "1" ]; then
2443            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2444            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2445        else
2446            for i in $possible_xenkernels ; do
2447                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2448                    LogFile "INFO: OK, I used my initiative and found that "
2449                    LogFile "INFO: $i is probably your Xen kernel. "
2450                    xenkernelpath="$i"
2451                    break
2452                fi
2453            done
2454            if [ ! -n "$xenkernelpath" ]; then
2455                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2456                if [ ! -n "$new_possible_xenkernels" ]; then
2457                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2458                    LogFile "INFO: Using $xenkernelpath"
2459                else
2460                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2461                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2462                    LogFile "INFO: $possible_xenkernels"
2463                    output=""
2464                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2465                    LogFile "INFO: Using $xenkernelpath"
2466                fi
2467            fi
2468        fi
2469        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2470            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2471        fi
2472    fi
2473    LogAll "TryToFindKernelPath found $output"
2474    echo "$output"
2475}
2476
2477
2478TurnTgzIntoRdz() {
2479    local tgz_dir_fname rdz_fname tempfile old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2480
2481    tgz_dir_fname=$1
2482    rdz_fname=$2
2483    kernelsize=$3
2484    maxsize=$(($BOOT_SIZE-$kernelsize))
2485    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2486    tempfile=$MINDI_TMP/temp.rd
2487    res=0
2488    echo -en "..."
2489    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2490    echo -en "..."
2491    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2492    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2493    echo -en "..."
2494    mkdir -p $mountpoint
2495    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2496    echo -en "..."
2497    old_pwd=`pwd`
2498    cd "$mountpoint"
2499
2500    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2501    for d in bin sbin lib lib64; do
2502        if [ -h "/$d" ]; then
2503            thelink=`readlink /$d`
2504            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2505            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2506            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2507                rmdir $mountpoint/$d
2508            fi
2509            if [ ! -h $mountpoint/$d ]; then
2510                rm -f $mountpoint/$d 2> /dev/null
2511                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2512            fi
2513        fi
2514    done
2515    LogFile "INFO: what is now in $mountpoint"
2516    ls -alR $mountpoint >> $LOGFILE
2517   
2518    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2519    for f in $tgz_dir_fname/*; do 
2520        if [ ! -r $f ]; then
2521            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2522        else
2523            cp -Rdf $f . 2>&1 >> $LOGFILE
2524        fi
2525    done
2526    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2527    ln -sf usr/sbin/init linuxrc
2528
2529    cd dev || Die "Can't cd to dev"
2530    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2531    rm -f dev-entries.tgz
2532    cd ..
2533
2534    for w in insmod.static insmod.static.old ; do
2535        s=`which $w 2> /dev/null`
2536        if [ -e "$s" ] ; then
2537            tar cf - -C / $s 2> /dev/null | tar xf -
2538        fi
2539    done
2540
2541    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2542   
2543    # Copy of files mandatory for ssh to automate mount if sshfs is used
2544    mkdir $mountpoint/.ssh $mountpoint/tmp
2545    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2546    cat > $mountpoint/tmp/myssh << EOF
2547ssh -o StrictHostKeyChecking=no $*
2548EOF
2549    chmod 755 $mountpoint/tmp/myssh
2550
2551    # Copy of files mandatory for ld.so
2552    cp -a /etc/ld.so.c* $mountpoint/etc
2553
2554    # Handle the case where busybox and mount are dynamically linked
2555    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2556    if [ $? -eq 0 ]; then
2557        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2558        rm -f bin/mount
2559    fi
2560
2561    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2562    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2563    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2564        if [ -r $f ]; then
2565            echo $f >> $MINDI_TMP/minimal.lis
2566            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2567        fi
2568    done
2569    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2570        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2571    done
2572    # Initial / are trucated by tar
2573    finallist=""
2574    # Remove directories from the list, as tar/cp will create them anyway
2575    # and it may hurt if /lib is in it as on Debian/Ubuntu
2576    # recent bash says that -d is true for a link to a dir !
2577    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2578        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2579            finallist="$finallist $f"
2580        fi
2581    done
2582    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2583    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2584    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2585
2586    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2587    ln -sf /bin/bash bin/sh
2588    LogIt "INFO: Using bash as default shell"
2589    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2590
2591    # Avoids an issue on some distro (RHEL5)
2592    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2593
2594    mkdir -p $mountpoint/tmp
2595    # Management of udev (which includes modprobe in rules)
2596    ps auxww | grep -v grep | grep -qw udevd
2597    if [ $? -eq 0 ]; then
2598        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2599        LogIt "INFO: udev device manager found"
2600        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2601        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2602        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2603        # Do not do it if it's a link (Ubuntu 64 bits #503)
2604        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2605            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2606        fi
2607        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2608            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2609        fi
2610        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2611            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2612        fi
2613        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2614            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2615            lis=""
2616            # Get only the files which exist in that list
2617            # and potentially their symlink structure
2618            for i in $lis2; do
2619                if [ -h $i ]; then
2620                    j=$i
2621                    while [ -h $j ]; do
2622                        lis="$lis $j"
2623                        j=`readlink -f $j`
2624                    done
2625                    lis="$lis $j"
2626                elif [ -f $i ]; then
2627                    lis="$lis $i"
2628                fi
2629            done
2630            # And their deps
2631            LocateDeps $lis > $MINDI_TMP/udev.lis
2632            for i in $lis; do
2633                if [ "`echo $i | cut -c1`" = "/" ]; then
2634                    j=`echo $i | cut -c2-`
2635                    [ "$j" != "" ] && rm -f $j
2636                fi
2637                echo "$i" >> $MINDI_TMP/udev.lis
2638            done
2639            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2640            echo "cp -a -n --parents `sort -u $MINDI_TMP/udev.lis` -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2641            cp -a -n --parents `sort -u $MINDI_TMP/udev.lis` -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2642            rm -f $MINDI_TMP/udev.lis
2643        else
2644            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2645            LogAll "         mindi will use static devices which may cause problems"
2646            rm -f $mountpoint/tmp/USE-UDEV
2647        fi
2648    fi
2649
2650    # Management of potential HW info (ProLiant only at the moment)
2651    rm -rf $MINDI_CACHE/bkphw
2652    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2653    if [ -d $MINDI_CACHE/bkphw ]; then
2654        LogIt "INFO: Hardware Information found and saved ..."
2655        cp -rp $MINDI_CACHE/bkphw .
2656        if [ -f $MINDI_CACHE/tools.files ]; then
2657            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2658            LocateDeps $lis > $MINDI_TMP/tools.lis
2659            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2660        fi
2661        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2662            mv -f $MINDI_CACHE/mindi-rsthw .
2663            chmod 755 ./mindi-rsthw
2664        fi
2665        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2666    fi
2667
2668    # Management of perl scripts delivered needed at restore time
2669    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2670    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2671
2672    for w in cdrom groovy-stuff ; do
2673        mkdir -p mnt/$w
2674    done
2675
2676    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2677
2678    echo -en "..."
2679    cd /
2680    if [ "${kernelname}" != "" ]; then
2681        needed_modules_path=lib/modules/${kernelname}
2682    else
2683        needed_modules_path=lib/modules/$KERVERRUN
2684    fi
2685
2686    needed_modules=""
2687    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2688
2689    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2690        # For PXE boot
2691        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2692    fi
2693    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2694        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2695    fi
2696    for i in $DENY_MODS; do
2697        LogFile "INFO: Removing $i from the list of modules to load"
2698        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2699    done
2700
2701    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2702    for i in $list_of_groovy_mods ; do
2703        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2704    done
2705
2706    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2707        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2708        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2709        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2710        # Uncompress modules if not using udev and native modprobe
2711        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2712            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2713                LogFile "INFO: Uncompressing $i"
2714                gunzip -f $mountpoint/$i
2715            fi
2716        fi
2717        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2718            echo "Replacing module symlink ($i) with actual file"
2719            rm -f $mountpoint/$i
2720            cp -Lf $i $mountpoint/$i
2721            ls -l $mountpoint/$i
2722        fi
2723    done
2724
2725    # Also copy modules.* in case of udev so that normal modprobe works
2726    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2727
2728    # Copy FW in case some drivers needs it
2729    for d in "/lib" "/usr/lib"; do
2730        if [ -d "$d/firmware" -a ! -h $d ]; then
2731            cp -a "$d/firmware" "$mountpoint/$d"
2732        fi
2733    done
2734
2735    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2736    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2737        if [ -d "$d/multipath" -a ! -h $d ]; then
2738            cp -a "$d/multipath" "$mountpoint/$d"
2739        fi
2740    done
2741
2742    # Copy an additional ProLiant tool for OBDR support
2743    if [ -f $MINDI_TMP/OBDR ]; then
2744        found=0
2745        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2746            mkdir -p $mountpoint/usr/bin
2747            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2748            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2749            found=1
2750        fi
2751        if [ -x /usr/bin/sg_wr_mode ]; then
2752            mkdir -p $mountpoint/usr/bin
2753            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2754            LocateDeps $lis > $MINDI_TMP/obdr.lis
2755            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2756            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2757            found=1
2758        fi
2759        if [ $found -eq 0 ]; then
2760            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2761            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2762        fi
2763    fi
2764
2765    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2766        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2767        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2768        rm -f $mountpoint/sbin/devfsd
2769    fi
2770    cd "$old_pwd"
2771    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2772    if [ _"$MONDO_SHARE" != _"" ]; then
2773        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2774        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2775        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2776        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2777        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2778        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2779        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2780        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2781        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2782    fi
2783    mkdir -p $mountpoint/proc
2784    LogFile "---------------------------"
2785    LogFile "Content of initial ramdisk:"
2786    LogFile "---------------------------"
2787    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2788    LogFile "---------------------------"
2789
2790    # Determine what filesystem to use for initrd image
2791    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2792    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2793    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2794    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2795        # say what will be used
2796        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2797        # kernel expects linuxrc in ext2 filesystem
2798        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2799        # unmount loop filesystem and create image file using the standard approach
2800        umount $mountpoint || Die "Cannot unmount $tempfile"
2801        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2802        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2803            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2804        else
2805            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2806        fi
2807        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2808        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2809        rm -f ${rdz_fname}.tmp
2810        # log that we are done
2811        LogFile "      ...done."
2812    elif [ "$gvFileSystem" = "initramfs" ]; then
2813        # say what will be used
2814        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2815        # make sure that cpio is there
2816        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2817        # go into filesystem
2818        cd "$mountpoint"
2819        # kernel expects init in cpio filesystem
2820        ln -sf sbin/init init
2821        # create cpio image file and unmount loop filesystem
2822        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2823        cd "$old_pwd"
2824        umount $mountpoint || Die "Cannot unmount $tempfile"
2825        # log that we are done
2826        LogFile "      ...done."
2827    else
2828        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2829    fi
2830
2831    if [ "$res" -eq "0" ] ; then
2832        echo -en "..."
2833    else
2834        echo -en "\rMade an rdz WITH ERRORS.           \n"
2835    fi
2836    return 0
2837}
2838
2839
2840##############################################################################
2841#----------------------------------- Main -----------------------------------#
2842##############################################################################
2843
2844# Now we can create what we need
2845mkdir -p $MINDI_TMP
2846
2847# Purge from potential old run
2848if [ _"$MINDI_CACHE" = _"" ]; then
2849    Die "MINDI_CACHE undefined"
2850fi
2851
2852# --nolog needs to be first, and is used in analyze-my-lvm
2853if [ "$1" = "--nolog" ] ; then
2854    shift
2855    LOGFILE=/dev/stderr
2856else
2857    > $LOGFILE
2858fi
2859if [ "$1" = "--printvar" ] ; then
2860    shift
2861    if [ _"$1" != _"" ] ; then
2862        set | grep -Ew "^$1" | cut -d= -f2
2863    fi
2864    exit 0
2865fi
2866
2867LogFile "mindi v$MINDI_VERSION"
2868LogFile "$ARCH architecture detected"
2869LogFile "mindi called with the following arguments:"
2870echo "$@">> $LOGFILE
2871LogFile "Start date : `date`"
2872LogFile "-----------------------------"
2873
2874[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2875
2876# Log some capital variables
2877[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2878[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2879LogFile "MONDO_SHARE = $MONDO_SHARE"
2880LogFile "MINDI_LIB = $MINDI_LIB"
2881LogFile "MINDI_SBIN = $MINDI_SBIN"
2882LogFile "MINDI_CONF = $MINDI_CONF"
2883if [ -f $MINDI_CONFIG ]; then
2884    LogFile "-----------------------------"
2885    LogFile " Mindi configuration file    "
2886    LogFile "-----------------------------"
2887    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2888    LogFile "-----------------------------"
2889fi
2890LogFile "In Mindi"
2891LogFile "--------"
2892LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2893LogFile "BOOT_SIZE = $BOOT_SIZE"
2894LogFile "--------"
2895
2896trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2897
2898# Sanity checks
2899which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2900which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2901which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2902which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2903if which awk &> /dev/null ; then
2904    if ! which gawk &> /dev/null ; then
2905        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2906    fi
2907fi
2908which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2909[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2910
2911[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2912
2913# Update the PATH variable if incomplete
2914if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2915    PATH=$PATH:/sbin:/usr/sbin
2916    export PATH
2917    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2918    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2919    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2920fi
2921
2922if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2923    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2924fi
2925
2926### TODO
2927### Fix as it's not mandatory on ia64
2928if [ "$ARCH" = "ia64" ] ; then
2929    if which elilo &> /dev/null ; then
2930        LILO_EXE=elilo
2931    else
2932        LILO_EXE=`which false 2> /dev/null`
2933    fi
2934else
2935    FindIsolinuxBinary
2936fi
2937trap "Aborted" SIGTERM
2938DONE="\r\t\t\t\t\t\t\t\tDone.         "
2939kernelpath=""
2940MONDO_ROOT=/var/cache/mondo
2941mkdir -p $MONDO_ROOT
2942
2943if [ -d "/proc/lvm" ]; then
2944    # LVM v1
2945    LVMCMD=""
2946    LVM="v1"
2947elif [ -d "/dev/mapper" ]; then
2948    # LVM v2
2949    LVMCMD="lvm"
2950    LVM="v2"
2951else
2952    LVM="false"
2953fi
2954
2955if [ -e "/proc/cmdline" ]; then
2956    CMDLINE="/proc/cmdline"
2957elif [ -e "/tmp/cmdline" ]; then
2958    CMDLINE="/tmp/cmdline"
2959else
2960    CMDLINE="/dev/null"
2961fi
2962
2963LogFile "INFO: LVM set to $LVM"
2964LogFile "----------"
2965LogFile "mount result:"
2966LogFile "-------------"
2967mount >> $LOGFILE
2968if [ -e /etc/raidtab ]; then
2969    LogFile "-------------"
2970    LogFile "/etc/raidtab content:"
2971    LogFile "-------------"
2972    cat /etc/raidtab >> $LOGFILE
2973else
2974    LogFile "No file /etc/raidtab"
2975fi
2976if [ -e /etc/mdadm.conf ]; then
2977    LogFile "-------------"
2978    LogFile "/etc/mdadm.conf content:"
2979    LogFile "-------------"
2980    cat /etc/mdadm.conf >> $LOGFILE
2981else
2982    LogFile "-------------"
2983    LogFile "No file /etc/mdadm.conf"
2984fi
2985LogFile "-------------"
2986LogFile "cat $CMDLINE"
2987LogFile "-------------"
2988cat $CMDLINE >> $LOGFILE
2989LogFile "-------------"
2990LogFile "cat /proc/swaps:"
2991LogFile "-------------"
2992cat /proc/swaps >> $LOGFILE
2993LogFile "-------------"
2994if [ -e /proc/mdstat ]; then
2995    LogFile "cat /proc/mdstat:"
2996    LogFile "-------------"
2997    cat /proc/mdstat >> $LOGFILE
2998else
2999    LogFile "No pseudo file /proc/mdstat"
3000fi
3001LogFile "-------------"
3002LogFile "cat /proc/partitions:"
3003LogFile "-------------"
3004cat /proc/partitions >> $LOGFILE
3005LogFile "-------------"
3006LogFile "cat /proc/filesystems:"
3007LogFile "-------------"
3008cat /proc/filesystems >> $LOGFILE
3009LogFile "-------------"
3010LogFile "lsmod result:"
3011LogFile "-------------"
3012lsmod >> $LOGFILE
3013MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3014if [ -x /usr/sbin/esxcfg-module ]; then
3015    LogFile "-------------"
3016    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3017    LogFile "-------------"
3018    LogFile "VMWare modules"
3019    LogFile "-------------"
3020    /usr/sbin/esxcfg-module -l >> $LOGFILE
3021    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3022fi
3023LogFile "Liste of extra modules is:" 
3024LogFile "-------------" 
3025LogFile "$EXTRA_MODS" 
3026LogFile "-------------" 
3027LogFile "FORCE_MODS:"
3028LogFile "-------------"
3029LogFile "$FORCE_MODS"
3030LogFile "-------------"
3031LogFile "DENY_MODS:"
3032LogFile "-------------"
3033LogFile "$DENY_MODS"
3034LogFile "-------------"
3035LogFile "df result:"
3036LogFile "----------"
3037df -aT >> $LOGFILE
3038LogFile "-------------"
3039LogFile "df -i result:"
3040LogFile "----------"
3041df -i >> $LOGFILE
3042LogFile "-------------"
3043if [ -r /boot/grub/menu.lst ]; then
3044    LogFile "-------------"
3045    LogFile "INFO: /boot/grub/menu.lst content"
3046    LogFile "-------------"
3047    cat /boot/grub/menu.lst >> $LOGFILE
3048    LogFile "-------------"
3049fi
3050if [ -r /boot/grub/grub.conf ]; then
3051    LogFile "-------------"
3052    LogFile "INFO: /boot/grub/grub.conf content"
3053    LogFile "-------------"
3054    cat /boot/grub/grub.conf >> $LOGFILE
3055    LogFile "-------------"
3056fi
3057if [ -r /boot/grub/grub.cfg ]; then
3058    LogFile "-------------"
3059    LogFile "INFO: /boot/grub/grub.cfg content"
3060    LogFile "-------------"
3061    cat /boot/grub/grub.cfg >> $LOGFILE
3062    LogFile "-------------"
3063fi
3064if [ -r /boot/grub/device.map ]; then
3065    LogFile "-------------"
3066    LogFile "INFO: /boot/grub/device.map content"
3067    LogFile "-------------"
3068    cat /boot/grub/device.map >> $LOGFILE
3069    LogFile "-------------"
3070fi
3071if [ -r /etc/lilo.conf ]; then
3072    LogFile "-------------"
3073    LogFile "INFO: /etc/lilo.conf content"
3074    LogFile "-------------"
3075    cat /etc/lilo.conf >> $LOGFILE
3076fi
3077LogFile "Full fdisk info"
3078LogFile "---------------"
3079$FDISK -l >> $LOGFILE
3080LogFile "----------------"
3081LogFile "List of extra modules is:"
3082LogFile "$EXTRA_MODS"
3083LogFile "-------------"
3084
3085# Compute libata version
3086laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3087# If libata v2 is used then remove ide-generic as it will perturbate boot
3088if [ "`echo $MODULES | grep libata`" ]; then
3089    if [ "$laver" = "2" ]; then
3090        DENY_MODS="$DENY_MODS ide-generic"
3091        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3092        LogFile "-------------"
3093    fi
3094fi
3095
3096# Check for McAfee which disturbs the access to some files (tgz in articular)
3097if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3098    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3099    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3100    LogFile "WARNING: You have two options:"
3101    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3102    LogFile "WARNING:  - Disable the scanner during the backup"
3103fi
3104
3105# Check for ISO_CMD command
3106if [ ! -x $ISO_CMD ]; then
3107    LogFile "NOTE: No CD image (ISO file) utility found"
3108fi
3109
3110FLOPPY_WAS_MOUNTED=""
3111for mtpt in /media/floppy /mnt/floppy /floppy ; do
3112    if mount | grep -w $mtpt &> /dev/null ; then
3113        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3114        umount $mtpt
3115    fi
3116done
3117
3118#
3119# If we have a USB device we need to store info
3120# and remove it from the parameters line
3121#
3122if [ "$#" -ne "0" ] ; then
3123    if [ "$1" = "--usb" ] ; then
3124        shift
3125        USBDEVICE=$1
3126        if [ _"$USBDEVICE" = _"" ]; then
3127            Die "No USB device specified"
3128        fi
3129        shift
3130    fi
3131fi
3132
3133if [ "$#" -ne "0" ] ; then
3134    if [ "$1" = "--findkernel" ] ; then
3135        resk=`TryToFindKernelPath`
3136        # Avoids logfile content for mondo
3137        export MONDO_SHARE=""
3138        if [ "$resk" = "" ] ; then
3139            if [ $KERNEL_IS_XEN = "yes" ]; then
3140                echo "$xenkernelpath"
3141                LogFile "INFO: xenkernelpath = $xenkernelpath"
3142                MindiExit 0
3143            else
3144                MindiExit -1
3145            fi
3146        else
3147            echo "$resk"
3148            LogFile "INFO: kernelpath = $resk"
3149            MindiExit 0
3150        fi
3151    elif [ "$1" = "--locatedeps" ] ; then
3152        [ ! "$2" ] && Die "Please specify the binary to look at"
3153        LocateDeps $*
3154        # Avoids logfile content for mondo
3155        export MONDO_SHARE=""
3156        MindiExit $?
3157    elif [ "$1" = "--readalllink" ] ; then
3158        [ ! "$2" ] && Die "Please specify the binary to look at"
3159        # Avoids logfile content for mondo
3160        export MONDO_SHARE=""
3161        mr-read-all-link $2
3162        MindiExit $?
3163    elif [ "$1" = "--makemessage" ] ; then
3164        MakeMessageFile | cut -c1-80
3165        MindiExit 0
3166    elif [ "$1" = "--makemountlist" ] ; then
3167        [ ! "$2" ] && Die "Please specify the output file"
3168        MakeMountlist $2
3169        CheckMountlist $2
3170        # Avoids logfile content for mondo
3171        export MONDO_SHARE=""
3172        MindiExit $?
3173    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3174        echo "Mindi v$MINDI_VERSION"
3175        # Avoids logfile content for mondo
3176        export MONDO_SHARE=""
3177        MindiExit 0
3178    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3179        MONDO_TMP=$2
3180        # Change MINDI_TMP for the one provided by mondo
3181        # So that it can get back the built files
3182        if [ _"$MONDO_TMP" = _"" ]; then
3183            Die "MONDO_TMP is empty, aborting"
3184        fi
3185        if [ _"$MONDO_TMP" = _"/" ]; then
3186            Die "MONDO_TMP is /, aborting"
3187        fi
3188        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3189        rmdir $MINDI_TMP
3190        export MINDI_TMP=$MONDO_TMP
3191        mkdir -p $MINDI_TMP
3192
3193        # This is the scratch dir in mondo - subdir images
3194        MINDI_CACHE=$3
3195
3196        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3197        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3198       
3199###
3200### Sq-Modification...
3201### Attempt to locate kernel specific module path
3202### if module path is found then use it other wise use uname -r to set it...
3203###
3204        if [ $KERNEL_IS_XEN = "yes" ]; then
3205            LogAll "INFO: xenkernelpath = $xenkernelpath"
3206        fi
3207        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3208        if [ ! -d "/lib/modules/$kernelname" ]; then
3209           LogAll "WARNING: Module path for ${kernelpath} not found..."
3210           LogAll "         using running kernel\'s modules."
3211           kernelname=$KERVERRUN
3212        else
3213           LogAll "Using modules for kernel: ${kernelname}"
3214        fi
3215        LogAll "INFO: kernelname = $kernelname"
3216        LogAll "INFO: kernelpath = $kernelpath"
3217###
3218### end of Sq-Modification
3219###
3220        TAPEDEV=$5
3221        TAPESIZE=$6
3222        FILES_IN_FILELIST=$7
3223        USE_LZO=$8
3224        CDRECOVERY=$9
3225        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3226            IMAGE_DEVS=""
3227        else
3228            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3229        fi
3230        if [ "${11}" ] ; then
3231            LILO_OPTIONS=""
3232    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3233        fi
3234        LAST_FILELIST_NUMBER=${12}
3235        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3236        export MINDI_EXCLUDE_DEVS="${14}"
3237        USE_COMP="${15}"
3238        USE_LILO="${16}"
3239        USE_STAR="${17}"
3240        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3241        DIFFERENTIAL="${19}"
3242        USE_GZIP="${20}"
3243        NOT_BOOT="${21}"
3244        [ "$USE_COMP" = "" ] && USE_COMP=yes
3245        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3246        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3247        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3248        # MONDO_ROOT is the real scratchdir
3249        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3250        if [ _"$MONDO_ROOT" != _"" ]; then
3251            mkdir -p $MONDO_ROOT
3252        else
3253            Die "MONDO_ROOT is undefined"
3254        fi
3255    else
3256        LogScreen "Syntax: mindi (--custom ....)"
3257        MindiExit -1
3258    fi
3259fi
3260
3261if [ _"$MINDI_CACHE" != _"" ]; then
3262    rm -rf $MINDI_CACHE/* 2> /dev/null
3263    mkdir -p $MINDI_CACHE
3264fi
3265
3266[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3267
3268if [ _"$MONDO_SHARE" = _"" ]; then
3269    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3270    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3271    LogIt "BusyBox sources are available from http://www.busybox.net"
3272    LogIt "------------------------------------------------------------------------------"
3273else
3274    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3275fi
3276if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3277    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3278else
3279    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3280    MindiExit -1
3281fi
3282
3283for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3284    modinfo $i 2> /dev/null 1> /dev/null
3285    if [ $? -eq 0 ]; then
3286        modprobe $i 2>&1 > /dev/null
3287    fi
3288done
3289
3290KERN_DISK_MADE=""
3291
3292LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3293LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3294LogFile "NOT_BOOT = '$NOT_BOOT'"
3295if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3296    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3297    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3298    MakeMountlist $MINDI_TMP/mountlist.txt
3299    CheckMountlist $MINDI_TMP/mountlist.txt
3300    mkdir -p $MINDI_TMP/small-all/tmp
3301    cd "$MINDI_TMP/small-all"
3302    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3303    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3304    sleep 2
3305    LogIt "Done. Exiting."
3306    MindiExit 0
3307fi
3308
3309if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3310    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3311fi
3312
3313if [ "$kernelpath" = "" ] ; then
3314    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3315    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3316    read ch
3317    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3318        USE_OWN_KERNEL="yes"
3319    else
3320        USE_OWN_KERNEL="no"
3321    fi
3322    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3323        kernelpath=`TryToFindKernelPath`
3324        if [ "$kernelpath" = "" ] ; then
3325            echo -n "Please enter kernel path : "
3326            read kernelpath
3327        fi
3328    fi
3329fi
3330
3331echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3332[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3333
3334mountpoint=$MINDI_TMP/mountpoint.$$
3335PrepareDataDiskImages
3336
3337ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3338rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3339export ramdisk_size=$rds
3340
3341LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3342if [ "$ARCH" = "ia64" ] ; then
3343    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3344else
3345    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3346fi
3347
3348[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3349...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3350
3351if [ _"$MONDO_SHARE" = _"" ]; then
3352    ListImagesForUser
3353    OfferToMakeBootableISO
3354    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3355        OfferToMakeBootableUSB
3356    fi
3357    LogAll "Finished."
3358elif [ "$TAPEDEV" ] ; then
3359    if [ "$ARCH" != "ia64" ] ; then
3360        # We need to keep the img file as boot file for ia64 platform
3361        rm -f $MINDI_CACHE/{*img,*iso}
3362    else
3363        rm -f $MINDI_CACHE/*iso
3364    fi
3365    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3366        OfferToMakeBootableUSB
3367    fi
3368    OfferToMakeBootableISO
3369    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3370        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3371    else
3372        Die "Cannot find all.tar.gz, to be written to tape"
3373    fi
3374elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3375    OfferToMakeBootableUSB
3376else
3377    OfferToMakeBootableISO
3378fi
3379# cleanup
3380LogAll "INFO: $FRIENDLY_OUTSTRING"
3381for mtpt in $FLOPPY_WAS_MOUNTED ; do
3382    mount $mtpt
3383done
3384MindiExit 0
Note: See TracBrowser for help on using the repository browser.