source: branches/3.2/mindi/mindi @ 3239

Last change on this file since 3239 was 3239, checked in by Bruno Cornec, 7 years ago
  • Fix build process for perl modules deps (creation of the perl-scripts file was incorrect with build dir in it, and overwritten)
  • Fix pod2man issue on mondorescue.conf by adding pod content in it which is then processed in the Makefile.PL
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 121.7 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3239 2014-01-05 12:35:28Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr stp garp"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci-hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci-hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp ptp_pch pps_core"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    #cp -a -n --parents -t $mappath $bigdir 2>> $MINDI_TMP/$$.log || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
258    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
259        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
260    else
261        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
262    fi
263    for included_item in $included_list ; do
264        if [ ! -e "$included_item" ] ; then
265            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
266            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
267            for ii in $sss ; do
268                [ -e "$ii" ] && AddKeyboardMappingFile $ii
269            done
270        else
271            AddKeyboardMappingFile $included_item
272        fi
273    done
274}
275
276
277CopyDependenciesToDirectory() {
278    local outdir incoming counter d found tdir
279    outdir=$1
280    mkdir -p $outdir
281    incoming=`ReadLine`
282    counter=0
283    while [ "$incoming" != "" ] ; do
284        # Non absolute file names should not arrive till here => skipped
285        if [ `echo "$incoming" | cut -c1` != '/' ]; then
286            LogAll "WARNING: Unable to handle $incoming"
287            incoming=`ReadLine`
288            continue
289        fi
290        # no parent directory of incoming should be a link, copy is not possible in that case
291        d=`dirname "$incoming"`
292        found="false"
293        while [ $d != "/" -a $found = "false" ]; do
294            [ -h "$d" ] && found="true"
295            d=`dirname "$d"`
296        done
297        if [ -d "$incoming" -a ! -h "$incoming" ]; then
298            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
299        elif [ -e "$incoming" ] && [ $found = "false" ]; then
300            if [ ! -h "$incoming" ]; then
301                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302            else
303                tdir=`dirname "$incoming"`
304                if [ ! -e "$outdir/$tdir" ]; then
305                    mkdir -p "$outdir/$tdir"
306                fi
307                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
308            fi
309            # Only uncompress modules if not using udevd
310            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
311                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
312            fi
313            [ -x "$outdir" ] && StripExecutable $outdir
314            counter=$(($counter+1))
315            LogProgress $counter $2
316        fi
317        incoming=`ReadLine`
318    done
319}
320
321
322CountItemsIn() {
323    local r
324    r=0
325    for q in $1 ; do
326        r=$(($r+1))
327    done
328    echo $r
329}
330
331
332DropOptimizedLibraries() {
333    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
334    filelist=$1
335    outdir=$2
336
337    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
338    if [ "$list_of_optimized_libraries" = "" ] ; then
339        return 0
340    fi
341    echo -en "Dropping i686-optimized libraries if appropriate"
342    for optimized_lib_name in $list_of_optimized_libraries ; do
343        echo -en "."
344        reason=""
345        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
346        echo "$vanilla_lib_name" >> $filelist
347        LogFile "INFO: Adding $vanilla_lib_name to filelist"
348        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
349        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
350
351        # This may return multiple files
352        for resolved in `mr-read-all-link $vanilla_lib_name`; do
353            LogFile "INFO: Adding as deps $resolved to filelist"
354            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
355            if [ "$vanilla_resolved_name" != "$resolved" ]; then
356                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
357                rmdir $outdir$resolved > /dev/null 2> /dev/null
358                ln -sf $vanilla_resolved_name $outdir$resolved
359                LogFile "INFO: Excluding deps $resolved" 
360                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
361                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
362                echo "$vanilla_resolved_name" >> $filelist.tmp
363                mv -f $filelist.tmp $filelist
364            fi
365        done
366    done
367    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
368    mv -f $filelist.tmp $filelist
369    echo -e "$DONE"
370}
371
372
373FindAndAddUserKeyboardMappingFile() {
374    local r res mapfile mappath included_item included_list keyfile mp locale
375    LogAll "INFO: Analyzing your keyboard's configuration."
376    KEYDIR=/usr/lib/kbd
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
378    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
383    if [ ! -e "$KEYDIR" ] ; then
384        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
385        return 0
386    fi
387    if [ -e "/etc/sysconfig/keyboard" ] ; then
388        LogFile "INFO: Red Hat-style config detected."
389        keyfile=/etc/sysconfig/keyboard
390    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
391        LogFile "INFO: Slackware-style config detected."
392        keyfile=/etc/rc.d/rc.keymap
393    elif [ -e "/etc/rc.config" ] ; then
394        LogFile "INFO: Debian-style config detected."
395        keyfile=/etc/rc.config
396    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        mkdir -p $bigdir/tmp
399        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
400        KBDEPTH=0
401        mkdir -p $bigdir/etc/console
402        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
403        echo ""
404        echo -e "$DONE"
405        return 0
406    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
407        LogFile "INFO: Ubuntu-style config detected."
408        mkdir -p $bigdir/tmp
409        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
410            kbdfile="/etc/console-setup/boottime.kmap.gz"
411        else
412            kbdfile="/etc/console-setup/cached.kmap.gz"
413        fi
414        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
415        KBDEPTH=0
416        mkdir -p $bigdir/etc/console-setup
417        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
418        echo ""
419        echo -e "$DONE"
420        return 0
421    elif [ -e "/etc/rc.conf" ] ; then
422        LogFile "INFO: ArchLinux config detected."
423        keyfile=/etc/rc.conf
424    elif [ -e "/etc/conf.d/keymaps" ] ; then
425        LogFile "INFO: Gentoo-style config detected."
426        keyfile=/etc/conf.d/keymaps
427    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
428        LogFile "INFO: X11-style config detected."
429        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
430    else
431        LogFile "Searching for rc.config ..."
432        keyfile=`find /etc -name rc.config | head -n1`
433        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
434            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
435            return
436        else
437            LogFile "INFO: Found $keyfile"
438        fi
439    fi
440    if [ ! -e "$KEYDIR/keymaps" ] ; then
441        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
442        return
443    fi
444    LogFile "INFO: keyfile=$keyfile"
445    # For SLES we need to remove the .map.gz extension Cf #614
446    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
447    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
448    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
449    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
450    LogFile "INFO: locale=$locale"
451    #
452    # Process the keymaps dir once for all
453    # AddKeyboardMappingFile will use it recursively
454    #
455    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
456    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
457    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
458    # If we have multiple keymaps then log it !!
459    echo "$mp" | grep -q " " >> $LOGFILE
460    if [ $? -eq 0 ]; then
461        LogAll "WARNING: Multiple keymaps found: $mp"
462        LogFile "INFO: The following one will be used"
463    fi
464    for i in $mp ; do
465        mappath=$i
466        [ -e "$i" ] && [ ! -d "$i" ] && break
467    done
468    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
469        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
470    fi
471    LogFile "INFO: mappath = $mappath"
472    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
473        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
474        return
475    fi
476    LogAll "INFO: Adding the following keyboard mapping tables: "
477    mkdir -p $bigdir/tmp
478    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
479    KBDEPTH=0
480    AddKeyboardMappingFile $mappath
481    echo ""
482    echo -e "$DONE"
483    rm -f $MINDI_TMP/keymaps.find
484    return 0
485}
486
487
488FindMboot32Binary() {
489    MBOOTC32=/usr/lib/syslinux/mboot.c32
490    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
491    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
492    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
493    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
494    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
495    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
496    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
497    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
498}
499
500FindIsolinuxBinary() {
501    ISOLINUX=/usr/lib/isolinux.bin
502    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
503    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
504    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
505    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
506    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
507    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
508    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
509    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
510}
511
512
513FindSpecificModuleInPath() {
514    local modpaths pwd line
515    pwd=`pwd`
516    cd /
517    if [ ! -e "$1" ] ; then
518        LogAll "WARNING: cannot search specific path '$1'"
519        return 1
520    fi
521    # Find all files and links (required for some VMWare VMs)
522    modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
523    echo "$modpaths"
524    cd "$pwd"
525}
526
527
528GenerateGiantDependencyList() {
529    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
530
531    echo -en "Analyzing dependency requirements"
532    outfile=$1
533    tempfile=$MINDI_TMP/$$.txt
534    incoming=`ReadLine`
535
536    > $tempfile
537    progress=0
538    res=0
539    noof_lines=$2
540    while [ "$incoming" != "" ] ; do
541        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
542            incoming=`ReadLine`
543            continue
544        fi
545        if [ "$incoming" = "LVMFILES:" ] ; then
546            break
547        fi
548        filelist=`GenerateListForFile "$incoming"`
549        r=$?
550        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
551        res=$(($res+$r))
552#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
553        for fname in $filelist ; do
554                [ "$fname" != "" ] && echo "$fname" >> $tempfile
555        done
556        progress=$(($progress+1))
557        LogProgress $progress $noof_lines
558        incoming=`ReadLine`
559    done
560    if  [ "$incoming" = "LVMFILES:" ] ; then
561        incoming=`ReadLine`
562        lvmversion=""
563        while [ "$incoming" != "" ] ; do
564            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
565                incoming=`ReadLine`
566                continue
567            fi
568            filelist=`GenerateListForFile "$incoming"`
569            for tool in $filelist ; do
570                lvmresolved=`readlink -f $tool`
571                if [ "$tool" = "$lvmresolved" ]; then
572                    echo "$tool" >> $tempfile
573                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
574                    if [ "$lvmversion" = "" ] ; then
575                        lvmversion=`$lvmresolved`
576                        echo "$lvmresolved" >> $tempfile
577                    fi
578                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
579                    if [ "$lvmversion" = "200" ]; then
580                        # pvdata and lvmcreate_initrd don't exist in LVM2
581                        case "$toolstripped" in
582                        "pvdata")
583                            continue
584                            ;;
585                        "lvmcreate_initrd")
586                            continue
587                            ;;
588                        esac
589                    fi
590                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
591                    if [ -e "$toolpath" ] ; then
592                        echo "$toolpath" >> $tempfile
593                        echo "$tool" >> $tempfile
594                    else
595                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
596                    fi
597                    if [ -e "$toolpath" ] ; then
598                        echo "$toolpath" >> $tempfile
599                        echo "$tool" >> $tempfile
600                    else
601                        echo "Where are your LVM-Tools? Couldn't find $tool"
602                    fi
603                else
604                    echo "$tool" >> $tempfile
605                fi
606            done
607            progress=$(($progress+1))
608            LogProgress $progress $noof_lines
609            incoming=`ReadLine`
610        done
611    fi
612    echo -en "$DONE\nMaking complete dependency list"
613
614    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
615    mv -f $tempfile.new $tempfile
616    > $outfile.pre
617    progress=0
618    noof_lines=`cat $tempfile | wc -l`
619    LogFile "---------------------------------"
620    LogFile "List of dependencies:             "
621    LogFile "---------------------------------"
622    for fname in `cat $tempfile` ; do
623        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
624        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
625        progress=$(($progress+1))
626        LogProgress $progress $noof_lines
627    done
628    if [ _"$MONDO_SHARE" != _"" ]; then
629        mkdir -p $bigdir/tmp
630        mkdir -p $bigdir/usr/bin
631        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
632            LogAll "\nINFO: Incorporating post-nuke tarball"
633            old_pwd=`pwd`
634            cd "$bigdir"
635            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
636            cd "$old_pwd"
637        fi
638        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
639            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
640        else
641            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
642            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
643            LogIt "       If Mindi was called by Mondo then send me a bug report."
644            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
645            LogIt "       Finally, run Mindi again."
646            Die "Odd."
647        fi
648        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
649        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
650            LogAll "\nINFO: Incorporating Network-related settings"
651            for r in NETFS-* ISO-PREFIX ; do
652                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
653                LogFile "INFO: Copying $r to ramdisk"
654            done
655        fi
656    fi
657    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
658    rm -f $tempfile $outfile.pre
659    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
660    return $res
661}
662
663
664GenerateListForFile() {
665    local files_found loc fname incoming i res
666    incoming="$1"
667    files_found=""
668    res=0
669
670    for fname in $incoming ; do
671        files_found="$files_found `LocateFile $fname`"
672    done
673
674    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
675}
676
677
678# Returns all disk devices which are part of a raid array
679GetAllRaidMembers() {
680    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
681}
682
683
684GetFileSizeList() {
685    local i
686    for i in `find $1 -type d -o -print` ; do
687        du -sk $i
688    done
689}
690
691
692# Check kernel filesystem capabilites for accessing initrd image
693# Could be ext2 FS (old mode) or initramfs (new mode)
694#
695# Interface definition:
696# param #1: absolute path to kernel image
697GetInitrdFilesystemToUse() {
698
699    # interface test: make sure we have one parameter
700    if [ $# -ne 1 ]; then
701        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
702    fi
703
704    # interface parameters
705    local lvKernelImage=$1
706
707    # local constants (filesystem magic strings)
708    local lcMagicCramfs="<3>cramfs: wrong magic"
709    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
710    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
711    local lcMagicInitfs="<6>checking if image is initramfs...|[<]6[>]Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
712
713    # local variables
714    local lvOffset
715    local lvScanRes
716    local lvUseFilesystem
717
718    # say where we are.
719    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
720
721    # verify that file exists
722    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
723
724    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
725    file $lvKernelImage 2>&1 | grep -q gzip
726    if [ $? -eq 0 ]; then
727        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
728        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
729    else
730        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
731        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
732        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
733        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
734        if [ $lvOffset -eq 0 ]; then
735            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
736            lvScanRes=$lcMagicInitfs
737        else
738            lvOffset=`expr $lvOffset / 2`
739            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
740            # scan again  kernel image
741            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
742        fi
743    fi
744
745    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
746    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
747        lvUseFilesystem="ext2fs"
748    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
749        lvUseFilesystem="ext3fs"
750    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
751        lvUseFilesystem="initramfs"
752    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
753        lvUseFilesystem="cramfs"
754    else
755        # In that case, we are most probably after 2.6.30 and use the supported initramfs
756        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
757        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
758        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
759        lvUseFilesystem="initramfs"
760    fi
761
762    # say what we are using
763    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
764
765    # return file system to use
766    echo "$lvUseFilesystem"
767
768}
769
770# Searches members of raid device
771# $1: raid device (/dev/md...)
772GetRaidDevMembers() {
773    if [ ! -f /etc/raidtab ]; then 
774        return
775    fi
776    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
777}
778
779
780ListAllPartitions() {
781    local res currline partition all_partitions ap_orig remaining i j
782
783    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
784    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
785    if [ -e "/vmfs/volumes" ]; then
786        # For VMWare ESX 3 get the device names of these volumes
787        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
788    fi
789    return
790}
791
792
793ListImagesForUser() {
794    local path fname
795    path=$MINDI_CACHE
796    echo -en "In the directory '$path' you will find the images:-\n"
797    for fname in `ls $path | grep -F mindi-` ; do
798        printf "%19s " $fname
799    done
800    echo " "
801}
802
803
804ListKernelModulePaths() {
805    local module_list module fname r kern
806    module_list="$MODULES"
807    # Remove unwanted modules from list
808    for i in $DENY_MODS; do
809        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
810        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
811    done
812###
813### Sq-Modification ... Use kernelname for module search path if specified
814###
815    if [ "${kernelname}" != "" ]
816    then
817        kern=${kernelname}
818    else
819        kern="$KERVERRUN"
820    fi
821    export KERVER=$kern
822###
823### Sq-Mod End
824###
825    # Get rid of duplicates, so that if a live kernel module also appears
826    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
827    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
828        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
829        if [ -z "$r" ]; then
830            if [ "`echo "$MODULES" | grep -w $module`" ]; then
831                r="[live module file not found]"
832            else
833                r="[extra module file not found]"
834            fi
835        else
836            [ -f "$r" ] && echo "$r"
837        fi
838        LogFile "INFO: module $module --> $r"
839    done
840    find /lib/modules/$kern/modules.* -type f 2> /dev/null
841}
842
843#
844# Critical function which computes all dependencies (dyn. lib.)
845# for a list of binaries
846#
847LocateDeps() {
848    local incoming fname deps
849    incoming="$*"
850    deps=""
851
852    for fname in $incoming ; do
853        if [ ! -e "$fname" ] ; then
854            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
855            if echo $fname | grep lvm &> /dev/null ; then
856                LogFile "          This warning only affects you if you are using LVM."
857                if echo "$MODULES" | grep lvm &> /dev/null ; then
858                    LogFile "          I think you are, so please take heed!"
859                else
860                    LogFile "          I don't think you are, so don't worry about it."
861                fi
862            fi
863        else
864            deps="$deps $fname" 
865        fi
866    done
867    mr-read-all-link `mr-process-ldd $deps | sort -u` | sort -u
868}
869
870
871# Give all symlinks recursively of a full path name
872ReadAllLink() {
873    file="$1"
874
875    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
876        # We need to normalise the path with .. in it
877        file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
878    done
879    echo "$file"
880    if [ ! -h $file ]; then
881        return 0
882    fi
883
884    link=`readlink $file`
885    d=`dirname $file`
886    # Is link a relative or full path name
887    fchar=`echo $link | cut -c1`
888    # If mother dir is a link print it
889    if [ -h "$d" ]; then
890        echo "$d"
891        d2=`readlink $d`
892        c2=`echo $d2 | cut -c1`
893        if [ "$c2" != "/" ]; then
894            if [ "$c2" != "." ]; then
895                d="/$d2"
896            else
897                d="$d/$d2"
898            fi
899        fi
900        echo "$d/`basename $file`"
901    fi
902    if [ "$fchar" != "/" ]; then
903        # Relative or local link
904        ReadAllLink "$d/$link" 
905    else
906        # Absolute path
907        ReadAllLink $link 
908    fi
909}
910
911
912LocateFile() {
913    local i j path fname_to_find location output resolved tmp stub cache_id loclist
914    fname_to_find="$1"
915    # It's an absolute path
916    j=`echo "$fname_to_find" | cut -c1`
917    if [ _"$j" = _"/" ]; then
918        dn=`dirname $fname_to_find`
919        # We suppose that the link is already included, just add the new file
920        if [ -h "$dn" ]; then
921            newdn=`readlink -f $dn`
922            bn=`basename $fname_to_find`
923            output="$newdn/$bn"
924        else
925            output="$fname_to_find"
926        fi
927        if [ -h "$output" ] ; then
928            output="`mr-read-all-link $output` $output"
929        fi
930        echo "$output"
931        return 0
932    fi
933    # It's not an absolute path
934    output=""
935    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
936    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
937        [ -h "$path" ] && continue
938        [ ! -e "$path/$fname_to_find" ] && continue
939        output="$path/$fname_to_find $output"
940        if [ -h "$path/$fname_to_find" ] ; then
941            output="`mr-read-all-link $path/$fname_to_find` $output"
942        fi
943    done
944    if [ "$output" = "" ] ; then
945        return 1
946    fi
947    echo "$output"
948    return 0
949}
950
951LogProgress() {
952    local i progress modres noof_lines
953 
954    progress=$1
955    noof_lines=$2
956
957    echo -en "\r\t\t\t\t\t\t\t\t"
958    i=$(($progress*100))
959    if [ $noof_lines -ne 0 ]; then
960        i=$(($i/$noof_lines))
961    else
962        i=0
963    fi
964    echo -en "$i"
965    echo -en "%"
966    modres=$(($progress%4))
967    [ "$modres" -eq "0" ] && echo -en "\t/"
968    [ "$modres" -eq "1" ] && echo -en "\t-"
969    [ "$modres" -eq "2" ] && echo -en "\t\\"
970    [ "$modres" -eq "3" ] && echo -en "\t|"
971}
972
973# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
974MakeMondoConfigFile() {
975    local outfile use_lzo use_comp use_star
976    outfile=$1
977    > $outfile
978    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
979    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
980    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
981    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
982    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
983    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
984    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
985    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
986    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
987    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
988    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
989    echo "use-lzo $use_lzo" >> $outfile
990    echo "use-gzip $use_gzip" >> $outfile
991    echo "use-star $use_star" >> $outfile
992    echo "use-lzma $use_lzma" >> $outfile
993    echo "use-comp $use_comp" >> $outfile
994    echo "datestamp `date`" >> $outfile
995    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
996    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
997    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
998    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
999    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1021}
1022
1023# Get PV's for an LV
1024GetPVsForLV() {
1025  if [ -n "$1" ]; then
1026    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1027    if [ -z "$vg" ]; then
1028      return
1029    fi
1030    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1031  fi
1032}
1033
1034
1035MakeMountlist() {
1036    local mountlist all_partitions current_partition \
1037partition_size partition_format outstring partition_number \
1038partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1039absolute_partition old_partition_fmt current_lvolume uname skip
1040
1041    LogFile "------------------------------------"
1042    LogFile "Your raw fstab file looks like this:"
1043    LogFile "------------------------------------"
1044    cat $MY_FSTAB >> $LOGFILE
1045    LogAll "-----------------------------------"
1046    LogAll "Your mountlist will look like this:"
1047    LogAll "-----------------------------------"
1048
1049# mountlist(OUT)
1050    mountlist=$1
1051
1052# NB: partition = device
1053# NB: mountpt = where the device is mounted
1054
1055    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1056
1057    [ "$mountlist" != "" ] && rm -Rf $mountlist
1058    > $mountlist
1059    all_partitions=""
1060   
1061    if [ $LVM != "false" ]; then
1062        LogAll "INFO: Analyzing LVM..."
1063        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1064        if [ $? -ne 0 ]; then
1065            LVM="false"
1066        fi
1067        # Excluded LVs and GVs are not reported here
1068        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1069    fi
1070    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1071    for i in $IMAGE_DEVS ; do
1072        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1073    done
1074    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1075    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1076    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1077    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1078    for c_p in $all_partitions ; do
1079        # Skip fd/cd devices, network FS, cifs
1080        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1081        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1082        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1083            current_partition=`readlink -f $c_p`
1084            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1085                current_partition="$c_p"
1086            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1087                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1088                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1089            fi
1090            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1091        else
1092            current_partition="$c_p"
1093        fi
1094        [ "$c_p" = "none" ] && continue
1095        redhat_label=""
1096        label=""
1097        uuid=""
1098        absolute_partition=`readlink -f $c_p`
1099        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1100
1101        # set default in case we dont't find it
1102        str_to_find_fmt_with=$current_partition
1103
1104        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1105        # current_partition contains only first column of /etc/fstab
1106        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1107            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1108            actual_dev=""
1109
1110            # 1st try, findfs - the RHEL way of finding labels and their partitions
1111            if [ -x "/sbin/findfs" ]; then
1112                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1113            fi
1114   
1115            # 2nd try : blkid, the good way for all LABEL except swap
1116            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1117                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1118                # For LVM FS it will give a /dev/dm-# which should then be converted
1119                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1120                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1121                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1122                    for dev in `ls /dev/mapper/*`; do
1123                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1124                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1125                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1126                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1127                            break
1128                        fi
1129                    done
1130                fi
1131            fi
1132   
1133            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1134            # For LVM gives a /dev/mapper entry
1135            if [ "x$actual_dev" = "x" ]; then
1136                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1137            fi
1138   
1139            # 4th try, with vol_id
1140            # SWAP only
1141            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1142                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1143                for dev_swap in $list_swaps ; do
1144                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1145                    if [ "x$dev_exists" != "x" ]; then
1146                        actual_dev=$dev_swap
1147                        break;
1148                    fi
1149                done
1150            fi
1151
1152            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1153            # LABEL=SW-cciss/c0d0p3 (RDP)
1154            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1155            # SWAP only
1156            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1157                    skip=""
1158                    uname=$KERVERRUN
1159                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1160                    # 2.6.12 needs 16 (FC3)
1161                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1162                    # 2.6.19 and upper needs 1052
1163                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1164                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1165                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1166                    if [ $skip = "" ]; then
1167                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1168                    fi
1169                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1170                    do
1171                        # Location of the swap label for kernel 2.6
1172                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1173                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1174                            actual_dev=$try_dev
1175                        fi
1176                    done
1177            fi
1178
1179            # Check if one of all those tries has known success
1180            if [ "x$actual_dev" != "x" ]; then
1181                current_partition=$actual_dev
1182            else
1183                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1184            fi
1185        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1186        # current_partition contains only first column of /etc/fstab
1187        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1188            uuid=`echo "$current_partition" | cut -d'=' -f2`
1189            actual_dev=""
1190
1191            # 1st try, findfs - the RHEL way of finding labels and their partitions
1192            if [ -x "/sbin/findfs" ]; then
1193                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1194            fi
1195   
1196            # 2nd try : blkid, the good way for all UUID except swap
1197            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1198                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1199                # For LVM FS it will give a /dev/dm-# which should then be converted
1200                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1201                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1202                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1203                    for dev in `ls /dev/mapper/*`; do
1204                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1205                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1206                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1207                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1208                            break
1209                        fi
1210                    done
1211                fi
1212            fi
1213   
1214            # 3th try, with vol_id
1215            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1216                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1217                for dev in $list_dev ; do
1218                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1219                    if [ "x$dev_exists" != "x" ]; then
1220                        actual_dev=$dev
1221                        break;
1222                    fi
1223                done
1224            fi
1225
1226            # 4th try, with dumpuuid (VMWare only ?) for swap
1227            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1228                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1229                for dev in $list_dev ; do
1230                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1231                    if [ "x$dev_exists" != "x" ]; then
1232                        actual_dev=$dev
1233                        break;
1234                    fi
1235                done
1236            fi
1237
1238            # Check if one of all those tries has known success
1239            if [ "x$actual_dev" != "x" ]; then
1240                current_partition=$actual_dev
1241            else
1242                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1243            fi
1244        else
1245            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1246            # they use symlinks in fstab unrelated to what is shown in mount !
1247            if [ _"$partition_mountpt" = _"" ]; then
1248                # set default in case we dont't find it
1249                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1250                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1251                            str_to_find_fmt_with=$tmpp
1252                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1253                            break;
1254                        fi
1255                done
1256            fi
1257        fi
1258
1259        # Detects noauto partitions not mounted and exclude them
1260        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1261        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1262                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1263            continue
1264        fi
1265        # Detects bind partitions and exclude them
1266        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1267                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1268            continue
1269        fi
1270
1271        # Look for devices which have to be excluded
1272        skip=0
1273        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1274            l=""
1275            list_of_devices="`mr-read-all-link $current_partition`"
1276            for d in $list_of_devices; do
1277                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1278            done
1279
1280            # Remove PVs from LVs excluded
1281            l="$l `GetPVsForLV $current_partition`"
1282
1283            # We want a single unique list
1284            list_of_devices="`echo $l | sort -u`"
1285
1286            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1287                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1288                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1289                    skip=1
1290                    continue
1291                fi
1292            done
1293        fi
1294        if [ $skip -eq 1 ]; then
1295            continue
1296        fi
1297
1298        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1299        # Detects iso9660 ISO images and exclude them
1300        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1301                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1302            continue
1303        fi
1304        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1305        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1306        # the former is then a link to the latter, so we test whether
1307        # $current_partition is actually such a link or not and set
1308        # $current_lvolume accordingly. On Debian you may find more than one answer
1309        # so we remove the one corresponding to /dev/.static
1310        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1311        # principle is the same and we need to find the link to it as well.
1312        # Note that $current_lvolume may well be an
1313        # ordinary device. It is just to make sure that we feed the right value
1314        # into any of the LVM tools if possible.
1315
1316        current_lvolume="$current_partition"
1317        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1318            # .static dir are a Debian specificity
1319            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1320            echo $current_lvolume | grep -q ' '
1321            if [ $? -eq 0 ]; then
1322                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1323            fi
1324            # if it's not found, it may well be a real device such as a multipath one
1325            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1326            if [ _"$current_lvolume" = _"" ]; then
1327                current_lvolume="$current_partition"
1328            fi
1329        fi
1330        #
1331        # End of LVM device style variation code (other than $current_lvolume).
1332
1333        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1334            # Size computed via LVM not directly
1335            partition_size="lvm"
1336        else
1337            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1338            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1339            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1340                # Skip swap files
1341                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1342                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1343                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1344                [ "$partition_format" != "swap" ] && partition_format="swap"
1345                if [ "$partition_size" = "" ] ; then
1346                    totalsize=0
1347                    items=0
1348                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1349                        totalsize=$(($totalsize+$i))
1350                        items=$(($items+1))
1351                    done
1352                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1353                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1354                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1355                fi
1356            else
1357                partition_size=`SizeOfPartition $current_partition`
1358            fi
1359        fi
1360        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1361        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1362        if [ "$partition_mountpt" = "" ] ; then
1363            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1364                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1365                    partition_mountpt="raid"
1366                    partition_format="raid"
1367                else
1368                    partition_mountpt="lvm"
1369                    partition_format="lvm"
1370                fi
1371            fi
1372        fi
1373        psz=$partition_size
1374        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1375        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1376        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1377            partition_mountpt="image"
1378            old_partition_fmt=$partition_format
1379            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1380            partition_size=$(($partition_size+1)); # just in case
1381            if [ "$partition_format" = "Linux" ] ; then
1382                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1383                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1384                partition_format=$old_partition_fmt
1385            fi
1386        fi
1387
1388        if [ ! "$partition_mountpt" ] ; then
1389            LogFile "------- $FDISK -l $qq log ------------"
1390            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1391                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1392                [ "$partition_format" ] && break
1393            done
1394            LogFile "------- $FDISK log end ------------"
1395            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1396                partition_format="compaq"
1397            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1398                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1399                continue
1400            fi
1401        fi
1402        if [ "$redhat_label" ]; then
1403            label="$redhat_label"
1404        elif [ "$uuid" ]; then
1405            label="$uuid"
1406        fi
1407        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1408        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1409        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1410        if [ "$current_partition" = "" ] ; then
1411            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1412        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1413            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1414                partition_mountpt=raid
1415                partition_format=raid
1416                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1417                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1418            else
1419                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1420            fi
1421        elif [ "$partition_format" = "" ] ; then
1422            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1423        elif [ "$partition_size" = "" ] ; then
1424            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1425        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1426            continue
1427        else
1428            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1429                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1430                partition_format="vfat"
1431            fi
1432            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1433            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1434        fi
1435    done
1436    LogAll "-----------------------------------" 
1437}
1438
1439CheckMountlist() {
1440    local file=$1
1441    # Coherency verification
1442    ML01=`cat $file | wc -l`
1443    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1444    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1445    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1446    if [ "$ML01" -ne "$ML1" ]; then
1447        LogFile "--------------------------------------------"
1448        LogAll "WARNING: Duplicate device entry in mountlist"
1449        LogFile "--------------------------------------------"
1450    fi
1451    if [ "$ML02" -ne "$ML2" ]; then
1452        LogFile "--------------------------------------------"
1453        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1454        LogFile "------------------------------------------------"
1455    fi
1456}
1457
1458OfferToMakeBootableISO() {
1459    local i old_pwd
1460    if [ -z "$ISO_CMD" ]; then
1461        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1462        return
1463    fi
1464    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1465        echo -en "Shall I make a bootable CD image? (y/[n]) "
1466        read i
1467        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1468    fi
1469    rm -Rf $MINDI_TMP/iso
1470    mkdir -p $MINDI_TMP/iso/{images,archives}
1471    LogFile "INFO: mindi_lib = $MINDI_LIB"
1472    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1473    for i in memdisk memtest.bin memtest.img ; do
1474        j=$MINDI_LIB/$i
1475        k=$MINDI_TMP/iso
1476        if [ -e "$j" ] ; then
1477            LogAll "INFO: Copying $j to $k"
1478            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1479            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1480            if [ _"$MONDO_SHARE" != _"" ]; then 
1481                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1482            fi
1483        fi
1484    done
1485    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1486    if [ $KERNEL_IS_XEN = "yes" ]; then
1487        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1488        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1489    fi
1490    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1491    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1492
1493    if [ _"$MONDO_SHARE" != _"" ]; then 
1494        if [ $KERNEL_IS_XEN = "yes" ]; then
1495            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1496            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1497        fi
1498        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1499        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1500    fi
1501    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1502    if [ "$ARCH" != "ia64" ] ; then
1503        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1504    fi
1505    old_pwd=`pwd`
1506    cd "$MINDI_TMP/iso"
1507    if [ "$ARCH" != "ia64" ] ; then
1508        if [ _"$MONDO_SHARE" != _"" ]; then 
1509            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1510            if [ $KERNEL_IS_XEN = "yes" ]; then
1511                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1512            fi
1513            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1514        fi
1515        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1516    else
1517        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1518    fi
1519    if [ "$?" -ne "0" ] ; then
1520        LogFile "----------- $ISO_CMD's errors --------------"
1521        LogAll "$ISO_CMD returned the following errors:"
1522        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1523        LogAll "ERROR: Failed to create ISO image."
1524    else
1525        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1526    fi
1527    rm -f $MINDI_TMP/mkisofs.log
1528    cd "$old_pwd"
1529}
1530
1531
1532OfferToMakeBootableUSB() {
1533    local i
1534    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1535        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1536        read i
1537        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1538        if [ "$USBDEVICE" = "" ]; then
1539            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1540            read dev
1541            USBDEVICE=$dev
1542        fi
1543        echo "WARNING: This will erase all content on $USBDEVICE"
1544        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1545        read i
1546        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1547    fi
1548    rm -Rf $MINDI_TMP/usb
1549    mkdir -p $MINDI_TMP/usb
1550    USBPART="${USBDEVICE}1"
1551
1552    echo -en "Transforming $USBDEVICE in a Bootable device " 
1553    echo -en "."
1554    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1555    LogFile "INFO: Checking $USBDEVICE"
1556    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1557    if [ $? -ne 0 ]; then
1558        LogAll "ERROR: Unable to access $USBDEVICE"
1559        LogAll "       Make sure your USB device is plugged in"
1560        MindiExit -1
1561    fi
1562    echo -en "."
1563    # Some distro do auto mount at that point (Ubuntu)
1564    LogFile "INFO: Unmounting $USBPART just in case"
1565    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1566    # If your key has no MBR it may cause an issue
1567    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1568    if [ -r $MBRFILE ]; then
1569        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1570        dd if=$MBRFILE of=$USBDEVICE
1571    else
1572        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1573        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1574    fi
1575    LogFile "INFO: Preparing $USBDEVICE"
1576    cat > $MINDI_TMP/fdisk.txt << EOF
1577d
1578d
1579d
1580d
1581n
1582p
15831
1584
1585
1586t
1587b
1588a
15891
1590w
1591EOF
1592    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1593    if [ $? -ne 0 ]; then
1594        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1595        LogAll "       Make sure your USB device is plugged in"
1596        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1597        MindiExit -1
1598    fi
1599    LogFile "fdisk build file"
1600    LogFile "----------------"
1601    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1602    LogFile "----------------"
1603    rm -f $MINDI_TMP/fdisk.txt
1604    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1605    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1606    echo -en "."
1607    # Calling kpartx in case devices were not created
1608    if [ -x "/sbin/kpartx" ]; then
1609        /sbin/kpartx -a $USBDEVICE
1610    fi
1611    # Some distro do auto mount at that point (Ubuntu)
1612    LogFile "INFO: Unmounting $USBPART just in case again"
1613    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1614    echo -en "."
1615    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1616    if [ "`which dmsetup`" != "" ]; then
1617        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1618        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1619            LogFile "INFO: Removing $block_id from device mapper."
1620            sleep 1
1621            dmsetup remove $block_id
1622        fi
1623    fi
1624    echo -en "."
1625    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1626    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1627    if [ $? -ne 0 ]; then
1628        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1629        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1630        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1631        MindiExit -1
1632    fi
1633    echo -en "."
1634    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1635    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1636    if [ $? -ne 0 ]; then
1637        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1638        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1639        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1640        MindiExit -1
1641    fi
1642    echo -en "."
1643    mkdir -p $MINDI_TMP/usb/images
1644    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1645    echo -en "."
1646    LogFile "INFO: mindi_lib = $MINDI_LIB"
1647    for i in memdisk memtest.bin memtest.img ; do
1648        j=$MINDI_LIB/$i
1649        k=$MINDI_TMP/usb
1650        if [ -e "$j" ] ; then
1651            LogIt "INFO: Copying $j to $k"
1652            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1653            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1654        fi
1655    done
1656    echo -en "."
1657    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1658    echo -en "."
1659    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1660    echo -en "."
1661    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1662    echo -en "."
1663    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1664    echo -en "."
1665    LogAll "----------- syslinux's conf --------------"
1666    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1667    LogAll "------------------------------------------"
1668    umount $MINDI_TMP/usb
1669    if [ "$ARCH" != "ia64" ] ; then
1670        syslinux -v 2>&1 | grep -q 4.02
1671        if [ $? -eq 0 ]; then
1672            # This buggy version of syslinux requires a call to --stupid and not -s
1673            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1674            res=$?
1675        else
1676            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1677            res=$?
1678        fi
1679        if [ $res -ne 0 ] ; then
1680            LogAll "----------- syslinux's errors --------------"
1681            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1682            LogAll "------------------------------------------"
1683            LogIt "ERROR: Failed to create USB image."
1684        else
1685            echo -e "$DONE"
1686            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1687        fi
1688        rm -f $MINDI_TMP/syslinux.log
1689    else
1690        LogAll "ERROR: No USB boot support for ia64"
1691        MindiExit -1
1692    fi
1693}
1694
1695
1696MakeMessageFile() {
1697   
1698    if [ -x "/bin/lsb_release" ]; then
1699        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1700    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1701        DESC="Arch Linux"
1702        if [ -r /var/log/pacman.log ]; then
1703            # there are no releases but we can get the last system upgrade
1704            # Output example:   Arch Linux [2011-03-03 01:39]
1705            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1706        fi
1707    elif [ -r /etc/issue.net ]; then
1708        DESC=`head -1 /etc/issue.net`
1709    elif [ -r /etc/issue ]; then
1710        DESC=`head -1 /etc/issue`
1711    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1712        # For pb >= 0.9.8
1713        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1714    else
1715        DESC="Unknown desc"
1716    fi
1717    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1718    if [ _"$MONDO_SHARE" != _"" ]; then
1719        if [ "$CDRECOVERY" != "yes" ] ; then
1720            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1721                echo -en "Press <enter> to continue.\n"
1722            elif [ ! "$MINDI_TMP" ] ; then
1723                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1724                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1725                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1726                fi
1727            else
1728                echo -en "$BOOT_MEDIA_MESSAGE"
1729            fi
1730        else
1731            echo -en "\
1732To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1733CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1734        fi
1735    fi
1736
1737    # Also create the other help screens
1738    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1739    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1740    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1741}
1742
1743
1744MakeBootConfFile() {
1745    local options i ooo
1746    options=""
1747    # Type of boot file (elilo or syslinux/isolinux)
1748    type=$1
1749    if [ "$type" = "elilo" ]; then
1750        sep="="
1751    else
1752        sep=" "
1753    fi
1754
1755    # Generic header for conf file
1756    if [ "$type" != "elilo" ] ; then
1757        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1758    else
1759        echo -en "prompt\n"
1760    fi
1761
1762    # Compute which default option to boot from
1763    if [ "$CDRECOVERY" = "yes" ] ; then
1764        echo -en "default${sep}RESTORE\n"
1765    # In case it's mondoarchive
1766    elif [ _"$MONDO_SHARE" != _"" ]; then
1767        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1768            echo -en "default${sep}iso\n"
1769        else
1770            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1771        fi
1772    else
1773        echo -en "default${sep}expert\n"
1774    fi
1775
1776    # Handle timeout
1777    if [ "$CDRECOVERY" != "yes" ] ; then
1778        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1779    else
1780        echo -en "timeout${sep}10000\n"
1781    fi
1782    echo -en "\n"
1783
1784    # prepare which labels will be generated
1785    if [ "$CDRECOVERY" = "yes" ] ; then
1786        options="RESTORE expert"
1787    else
1788        if [ _"$MONDO_SHARE" != _"" ]; then
1789            options="interactive expert compare iso nuke isonuke"
1790        else
1791            options="expert"
1792        fi
1793    fi
1794
1795    # Generate rest of conf file
1796    for i in $options ; do
1797        ooo=$i
1798        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1799        if [ "$type" = "elilo" ]; then
1800            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1801        else
1802            ps="/"
1803            if [ "$type" = "syslinux" ]; then
1804                ps=""
1805            fi
1806            if [ $KERNEL_IS_XEN = "no" ]; then
1807                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1808            else
1809                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1810            fi
1811        fi
1812        echo -en "$outstr"
1813    done
1814    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1815        if [ "$type" = "elilo" ]; then
1816            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1817            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1818        else
1819            ps="/"
1820            if [ "$type" = "syslinux" ]; then
1821                ps=""
1822            fi
1823            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1824            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1825        fi
1826    fi
1827}
1828
1829
1830PrepareBootDiskImage_LILO() {
1831    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1832    imagesdir=$MINDI_CACHE
1833    kernelpath=$1
1834
1835    retval=0
1836
1837    old_pwd=`pwd`
1838    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1839    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1840    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1841    echo -en "..."
1842    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1843    mountpoint=$MINDI_TMP/mountpoint.$$
1844    mkdir -p $mountpoint
1845    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1846    LogFile "Creating vfat filesystem on $imagefile" 
1847    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1848    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1849
1850    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1851    mkdir -p $mountpoint/etc
1852    liloconf=$mountpoint/elilo.conf
1853
1854    MakeBootConfFile elilo > $liloconf
1855
1856    # Copy it so that CD-ROM menu entry is satisfied
1857    mountefi=0
1858    df -T | grep /boot/efi | grep -q vfat
1859    if [ $? -ne 0 ]; then
1860        mount /boot/efi
1861        if [ $? -ne 0 ]; then
1862            echo "You have to mount your EFI partition when using mindi"
1863            MindiExit -1
1864        fi
1865        mountefi=1
1866    fi
1867    el=`find /boot/efi -name elilo.efi`
1868    cp $el $mountpoint
1869    cp $liloconf $mountpoint
1870    if [ $mountefi -eq 1 ]; then
1871        umount /boot/efi 2>&1 > /dev/null
1872    fi
1873
1874    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1875    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1876    if [ "$?" -ne "0" ] ; then
1877        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1878        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1879        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1880        rm -f $MINDI_TMP/mtpt.$$
1881        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1882        retval=$(($retval+1))
1883    fi
1884    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1885
1886    mkdir -p $mountpoint/tmp
1887    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1888        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1889    fi
1890
1891    # copy the kernel across
1892    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1893    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1894    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1895    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1896    if [ "$?" -ne "0" ] ; then
1897        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1898        du -sk $mountpoint/* >> $LOGFILE
1899        LogFile "--- end of list of files ---"
1900        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1901        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1902        cd "$old_pwd"
1903        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1904        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1905    #   losetup /dev/loop0 -d
1906        [ "$imagefile" != "" ] && rm -f $imagefile
1907        LogIt "ERROR: Sorry, your kernel is too big for your image"
1908        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1909        return 0
1910    fi
1911    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1912    LogFile "INFO: Free space left on image = $free_space KB"
1913    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1914    # make it bootable
1915    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1916    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1917    if [ "$KERN_DISK_MADE" ] ; then
1918        LogFile "INFO: Not running LILO. It's not that kind of disk."
1919    fi
1920
1921    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1922    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1923    echo -en "..."
1924    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1925    if [ "$retval" -eq "0" ] ; then
1926        echo -en "...$DONE\n"
1927        if [ "$KERN_DISK_MADE" ] ; then
1928            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1929        fi
1930    else
1931        echo -en "...failed\n"
1932        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1933        [ "$imagefile" != "" ] && rm -f $imagefile
1934    fi
1935    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1936    return $retval
1937}
1938
1939
1940PrepareBootDiskImage_ISOLINUX() {
1941    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1942    imagesdir=$MINDI_CACHE
1943    kernelpath=$1
1944    do_boot_root_thingy=""
1945    retval=0
1946
1947    old_pwd=`pwd`
1948    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1949    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1950    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1951    echo -en "..."
1952    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1953    mountpoint=$MINDI_TMP/mountpoint.$$
1954    mkdir -p $mountpoint
1955    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1956    LogFile "INFO: Creating vfat filesystem on $imagefile"
1957    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1958    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1959    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1960
1961    # Only move it now to its final destination and use it now
1962    mv $imagefile $imagesdir
1963    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1964
1965    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1966
1967    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1968    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1969    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1970    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1971    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1972    if [ "$?" -ne "0" ] ; then
1973        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1974        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1975        LogAll "       Please unload some of your modules and try again."
1976        rm -f $MINDI_TMP/mtpt.$$
1977        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1978        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1979        retval=$(($retval+1))
1980    fi
1981
1982    mkdir -p $mountpoint/tmp
1983    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1984        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1985    fi
1986
1987    # copy the kernel across
1988    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1989    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1990    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1991         
1992    retval=0
1993    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1994    retval=$?
1995    if [ $KERNEL_IS_XEN = "yes" ]; then
1996        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1997        let retval+=$?
1998    fi
1999 
2000    if [ "$retval" -ne "0" ] ; then
2001        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2002        du -sk $mountpoint/* >> $LOGFILE
2003        LogFile "--- end of list of files ---"
2004        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2005        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2006        cd "$old_pwd"
2007        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2008        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2009
2010        LogIt "ERROR: Sorry, your kernel is too big for your image"
2011        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2012    fi
2013    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2014    LogFile "INFO: Free space left on image = $free_space KB"
2015    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2016
2017    # make it bootable
2018    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2019    mkdir -p $mountpoint/etc
2020    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2021    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2022    echo -en "..."
2023    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2024
2025    if [ "$retval" -eq "0" ] ; then
2026        echo -en "...$DONE\n"
2027        if [ "$KERN_DISK_MADE" ] ; then
2028            [ "$imagefile" != "" ] && rm -f $imagefile
2029            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2030        fi
2031    else
2032        echo -en "...failed\n"
2033        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2034        [ "$imagefile" != "" ] && rm -f $imagefile
2035    fi
2036    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2037    return $retval
2038}
2039
2040
2041ParseModprobeForIncludes() {
2042local MODPROBE_CONF mpincfile includes include
2043
2044MODPROBE_CONF=/etc/modprobe.conf
2045mpincfile=$1
2046touch $mpincfile
2047if [ -a $MODPROBE_CONF ]; then
2048    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2049    if [ -n "$includes" ]; then
2050        for include in $includes
2051        do
2052            if [ -a "$include" ]; then
2053                echo $include >> $mpincfile
2054            fi
2055        done
2056    fi
2057fi
2058}
2059
2060
2061PrepareDataDiskImages() {
2062    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2063
2064    imagesdir=$MINDI_CACHE
2065    rm -f $imagesdir/mindi.iso
2066    needlist=$MINDI_TMP/what-we-need.txt
2067    bigdir=$MINDI_TMP/bigdir
2068    mkdir -p $bigdir/usr/bin
2069    mkdir -p $bigdir/usr/sbin
2070    includefile=$MINDI_TMP/$$.includefile.txt
2071
2072    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2073    for d in bin sbin lib lib64; do
2074        if [ -h "/$d" ]; then
2075            thelink=`readlink /$d`
2076            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2077            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2078            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2079                rmdir $mountpoint/$d
2080            fi
2081            if [ ! -h $mountpoint/$d ]; then
2082                rm -f $mountpoint/$d 2> /dev/null
2083                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2084            fi
2085        fi
2086    done
2087
2088    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2089    if [ -e "$DEPLIST_FILE" ]; then
2090        lfiles="$DEPLIST_FILE $lfiles"
2091    fi
2092    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2093    ParseModprobeForIncludes $includefile
2094    lines=$(($lines+`cat $includefile | wc -l`))
2095    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2096    res=$?
2097    rm -f $includefile
2098    ListKernelModulePaths >> $needlist
2099    if [ "$res" -ne "0" ] ; then
2100        Die "You have $res files present in dependency list\nbut absent from filesystem."
2101    fi
2102    FindAndAddUserKeyboardMappingFile
2103    mkdir -p $bigdir/tmp
2104    if [ _"$MONDO_SHARE" != _"" ]; then
2105        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2106        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2107    fi
2108    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2109    DropOptimizedLibraries $needlist $bigdir
2110    echo -en "Assembling dependency files"
2111
2112    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2113
2114    # also copy io.sys and msdos.sys, if we can find them
2115    for i in `mount | cut -d' ' -f3` ; do
2116        for j in io.sys msdos.sys ; do
2117            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2118        done
2119    done
2120
2121    # master boot record, too
2122    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2123    if [ "$i" ] ; then
2124        LogAll "INFO: Backing up $i's MBR"
2125        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2126        sleep 1
2127        sync
2128        j=$i
2129        [ -h "$j" ] && j=`readlink -f $j`
2130        LogAll "INFO: Creating /dev/boot_device ($j)"
2131        mkdir -p $bigdir/dev
2132        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2133    fi
2134
2135    old_pwd=`pwd`
2136    cd "$bigdir"
2137
2138    # Get terminfo content
2139    ti="usr/share/terminfo/l"
2140    if [ -d /$ti ]; then
2141        mkdir -p $ti
2142        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2143    fi
2144    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2145        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2146        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2147    fi
2148    if [ -d "/lib/dev-state" ]; then 
2149        cp -a /lib/dev-state ./lib/ 2>> $MINDI_TMP/$$.log || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2150    fi
2151    cd "$old_pwd"
2152    echo -e "$DONE"
2153    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2154    MakeMountlist $MINDI_TMP/mountlist.txt
2155    CheckMountlist $MINDI_TMP/mountlist.txt
2156    mkdir -p $bigdir/tmp
2157    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2158    if [ _"$MONDO_SHARE" != _"" ]; then
2159        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2160    fi
2161    if [ $LVM != "false" ]; then
2162        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2163        if [ "$?" -ne "0" ]; then
2164            LVM="false"
2165            rm -f $bigdir/tmp/i-want-my-lvm
2166        else
2167            LogFile "Your i-want-my-lvm file content is:"
2168            LogFile "-----------------------------------"
2169            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2170            LogFile "-----------------------------------"
2171        fi
2172    fi
2173    LogFile "Your mountlist.txt file content is:"
2174    LogFile "-----------------------------------"
2175    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2176    LogFile "-----------------------------------"
2177
2178    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2179    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2180    if [ _"$MONDO_SHARE" != _"" ]; then
2181        for q in filelist.full.gz biggielist.txt ; do
2182            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2183            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2184        done
2185    fi
2186
2187    echo -en "Tarring and zipping the data content..."
2188    size_of_all_tools=`du -sk $bigdir | cut -f1`
2189    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2190    LogFile "Size of the data content"
2191    LogFile "------------------------"
2192    du -sk $imagesdir/*gz >> $LOGFILE
2193    LogFile "------------------------"
2194    echo -e "$DONE"
2195
2196    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2197    rm -rf $bigdir
2198    rm -f $needlist
2199}
2200
2201
2202ProcessLDD() {
2203    local incoming f d nd bd bnd
2204    read incoming
2205    while [ "$incoming" != "" ]; do
2206        # We take the full path name of the dyn. lib. we want
2207        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2208        for f in $incoming ; do
2209            # echo modified file name if one of the parent dir is a link
2210            # by replacing the original dirname by the destination of the link
2211            d="`dirname $f`"
2212            found="false"
2213            while [ "$d" != "/" ]; do
2214                if [ -h "$d" ]; then
2215                    nd=`readlink -f $d`
2216                    bd=`basename $d`
2217                    bnd=`basename $nd`
2218                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2219                    echo $d
2220                fi
2221                d="`dirname $d`"
2222            done
2223
2224            echo "$f"
2225            echo "`ReadAllLink $f`"
2226        done
2227        read incoming
2228    done
2229}
2230
2231
2232Prompt() {
2233    echo -en "$1"
2234    read line
2235}
2236
2237
2238ReadLine() {
2239    local i incoming
2240    read incoming
2241    i=0
2242    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2243        i=$(($i+1))
2244        read incoming
2245    done
2246    echo "$incoming"
2247}
2248
2249
2250SizeOfPartition() {
2251    local devpath drive res stub
2252    device=$1
2253    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2254        Die "Cannot find $device's size - is your /etc/fstab sane?"
2255    fi
2256    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2257        res=`SizeOfRaidPartition $device`
2258        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2259        echo "$res"
2260        return 0
2261    fi
2262    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2263    res=`$FDISK -s $device 2>> $LOGFILE`
2264    # end patch
2265    # take only the first in case of multiple mount (cifs, nfs, ...)
2266    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2267    [ "$res" = "" ] && res="-1"
2268    echo $res
2269    return 0
2270}
2271
2272
2273SizeOfRaidPartition() {
2274    local real_dev smallest_size silly tmp
2275
2276    silly=999999999
2277    smallest_size=$silly
2278
2279    for real_dev in `GetRaidDevMembers $1` ; do
2280        tmp=`SizeOfPartition $real_dev`
2281        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2282    done
2283
2284    if [ "$smallest_size" = "$silly" ] ; then
2285        echo "-1"
2286        return 1
2287    else
2288        echo "$smallest_size"
2289        return 0
2290    fi
2291}
2292
2293
2294StripExecutable()
2295{
2296    local tmpfile
2297
2298    tmpfile=$MINDI_TMP/stripped.$$.dat
2299    [ -d "$1" ] || [ -h "$1" ] && return
2300    cp -f $1 $tmpfile 2>> $LOGFILE
2301    strip $tmpfile 2> /dev/null
2302    if [ "$?" -eq "0" ] ; then
2303        cp -f $tmpfile $1 2>> $LOGFILE
2304        LogFile "INFO: Stripped binary $2"
2305    fi
2306    rm -f $tmpfile
2307}
2308
2309KernelVer() {
2310        local fkern_ver fname
2311
2312        fname=$1
2313        file $fname | grep -q gzip
2314        if [ "$?" -eq "0" ] ; then
2315            # Used by ia64
2316            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2317        else
2318            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2319        fi
2320        echo "$fkern_ver"
2321}
2322
2323
2324# WARNING: This function should just echo the final result !!!
2325#
2326TryToFindKernelPath() {
2327    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2328
2329    we_want_version=$KERVERRUN
2330    possible_kernels=""
2331    duff_kernels=""
2332    output=""
2333   
2334    if [ "$ARCH" = "ia64" ] ; then
2335       root="/boot/efi/efi"
2336    else
2337       root="/"
2338    fi
2339    # See if we're booted from a Xen kernel
2340    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2341    if [ -f /proc/xen/capabilities ]; then
2342        # It's a Xen kernel
2343        KERNEL_IS_XEN="yes"
2344        LogFile "INFO: It's a Xen kernel..."
2345    fi
2346
2347    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2348        [ ! -e "$fname" ] && continue
2349        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2350        fkern_ver=`KernelVer $fname`
2351        [ "$fkern_ver" = "" ] && continue
2352        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2353        [ -f "$fname" ] || continue
2354        [ -h "$fname" ] && continue
2355        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2356        file $fname | grep -q gzip
2357        if [ "$?" -eq "0" ] ; then
2358            # Used by ia64
2359            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2360                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2361                duff_kernels="$fname $duff_kernels"
2362            else
2363                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2364                possible_kernels="$fname $possible_kernels"
2365            fi
2366        else
2367            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2368                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2369                duff_kernels="$fname $duff_kernels"
2370            else
2371                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2372                possible_kernels="$fname $possible_kernels"
2373            fi
2374        fi
2375    done
2376    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2377        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2378    fi
2379    if [ ! "$possible_kernels" ] ; then
2380        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2381        possible_kernels="$duff_kernels"
2382        if [ ! "$possible_kernels" ] ; then
2383            LogAll "INFO: Sorry, no duff kernels either"
2384        else
2385            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2386            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2387        fi
2388    fi
2389    if [ $KERNEL_IS_XEN = "yes" ]; then
2390        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2391        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2392        FindMboot32Binary
2393    fi
2394    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2395    noof_kernels=`CountItemsIn "$possible_kernels"`
2396    if [ "$noof_kernels" -eq "0" ] ; then
2397        LogAll "Could not find your kernel."
2398        if [ -e "/boot/vmlinuz" ] ; then
2399            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2400            output=/boot/vmlinuz
2401        else
2402            output=""
2403        fi
2404    elif [ "$noof_kernels" -eq "1" ] ; then
2405        kp=`echo "$possible_kernels" | sed s/' '//`
2406        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2407        output="$kp"
2408    else
2409        for i in $possible_kernels ; do
2410            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2411                LogAll "INFO: OK, I used my initiative and found that "
2412                LogAll "INFO: $i is probably your kernel. "
2413                output="$i"
2414                break
2415            fi
2416        done
2417        if [ ! -n "$output" ]; then
2418            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2419                output=/boot/vmlinuz
2420                LogFile "INFO: Schlomo, this one's for you."
2421            else
2422                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2423                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2424                LogFile "INFO: $possible_kernels"
2425                output=""
2426            fi
2427        fi
2428    fi
2429    if [ $KERNEL_IS_XEN = "yes" ]; then
2430        if [ "$noof_xenkernels" -eq "0" ]; then
2431            xenkernelpath=""
2432        elif [ "$noof_xenkernels" -eq "1" ]; then
2433            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2434            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2435        else
2436            for i in $possible_xenkernels ; do
2437                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2438                    LogFile "INFO: OK, I used my initiative and found that "
2439                    LogFile "INFO: $i is probably your Xen kernel. "
2440                    xenkernelpath="$i"
2441                    break
2442                fi
2443            done
2444            if [ ! -n "$xenkernelpath" ]; then
2445                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2446                if [ ! -n "$new_possible_xenkernels" ]; then
2447                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2448                    LogFile "INFO: Using $xenkernelpath"
2449                else
2450                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2451                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2452                    LogFile "INFO: $possible_xenkernels"
2453                    output=""
2454                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2455                    LogFile "INFO: Using $xenkernelpath"
2456                fi
2457            fi
2458        fi
2459        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2460            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2461        fi
2462    fi
2463    LogAll "TryToFindKernelPath found $output"
2464    echo "$output"
2465}
2466
2467
2468TurnTgzIntoRdz() {
2469    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2470
2471    tgz_dir_fname=$1
2472    rdz_fname=$2
2473    kernelsize=$3
2474    maxsize=$(($BOOT_SIZE-$kernelsize))
2475    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2476    tempfile=$MINDI_TMP/temp.rd
2477    mountpoint=$MINDI_TMP/mnt1
2478    res=0
2479    echo -en "..."
2480    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2481    echo -en "..."
2482    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2483    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2484    echo -en "..."
2485    mkdir -p $mountpoint
2486    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2487    echo -en "..."
2488    old_pwd=`pwd`
2489    cd "$mountpoint"
2490
2491   
2492    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2493    for f in $tgz_dir_fname/*; do 
2494        if [ ! -r $f ]; then
2495            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2496        else
2497            cp -Rdf $f . 2>&1 >> $LOGFILE
2498        fi
2499    done
2500    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../usr/sbin/init linuxrc)
2501    ln -sf usr/sbin/init linuxrc
2502
2503    cd dev || Die "Can't cd to dev"
2504    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2505    rm -f dev-entries.tgz
2506    cd ..
2507
2508    for w in insmod.static insmod.static.old ; do
2509        s=`which $w 2> /dev/null`
2510        if [ -e "$s" ] ; then
2511            tar cf - -C / $s 2> /dev/null | tar xf -
2512        fi
2513    done
2514
2515    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2516   
2517    # Copy of files mandatory for ssh to automate mount if sshfs is used
2518    mkdir $mountpoint/.ssh
2519    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2520    echo > $mountpoint/tmp/myssh << EOF
2521ssh -o StrictHostKeyChecking=no $*
2522EOF
2523    chmod 755 $mountpoint/tmp/myssh
2524
2525    # Copy of files mandatory for ld.so
2526    cp -a /etc/ld.so.c* $mountpoint/etc
2527
2528    # Handle the case where busybox and mount are dynamically linked
2529    file $MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | grep -q "dynamically" 
2530    if [ $? -eq 0 ]; then
2531        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2532        rm -f bin/mount
2533    fi
2534
2535    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2536    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2537    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2538        if [ -r $f ]; then
2539            echo $f >> $MINDI_TMP/minimal.lis
2540            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2541        fi
2542    done
2543    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2544        mr-read-all-link $f >> $MINDI_TMP/minimal.lis
2545    done
2546    # Initial / are trucated by tar
2547    finallist=""
2548    # Remove directories from the list, as tar/cp will create them anyway
2549    # and it may hurt if /lib is in it as on Debian/Ubuntu
2550    # recent bash says that -d is true for a link to a dir !
2551    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2552        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2553            finallist="$finallist $f"
2554        fi
2555    done
2556    #tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2557    echo "cp -a -n --parents $finallist -t $mountpoint" 2>&1 >> $MINDI_TMP/$$.log
2558    cp -a -n --parents $finallist -t $mountpoint 2>> $MINDI_TMP/$$.log || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2559
2560    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2561    ln -sf /bin/bash bin/sh
2562    LogIt "INFO: Using bash as default shell"
2563    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2564
2565    # Avoids an issue on some distro (RHEL5)
2566    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2567
2568    mkdir -p $mountpoint/tmp
2569    # Management of udev (which includes modprobe in rules)
2570    ps auxww | grep -v grep | grep -qw udevd
2571    if [ $? -eq 0 ]; then
2572        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2573        LogIt "INFO: udev device manager found"
2574        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2575        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2576        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2577        # Do not do it if it's a link (Ubuntu 64 bits #503)
2578        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2579            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2580        fi
2581        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2582            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2583        fi
2584        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2585            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2586        fi
2587        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2588            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2589            lis=""
2590            # Get only the files which exist in that list
2591            # and potentially their symlink structure
2592            for i in $lis2; do
2593                if [ -h $i ]; then
2594                    j=$i
2595                    while [ -h $j ]; do
2596                        lis="$lis $j"
2597                        j=`readlink -f $j`
2598                    done
2599                    lis="$lis $j"
2600                elif [ -f $i ]; then
2601                    lis="$lis $i"
2602                fi
2603            done
2604            # And their deps
2605            LocateDeps $lis > $MINDI_TMP/udev.lis
2606            for i in $lis; do
2607                if [ "`echo $i | cut -c1`" = "/" ]; then
2608                    j=`echo $i | cut -c2-`
2609                    [ "$j" != "" ] && rm -f $j
2610                fi
2611                echo "$i" >> $MINDI_TMP/udev.lis
2612            done
2613            #tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2614            echo "cp -a -n --parents `sort -u $MINDI_TMP/udev.lis` -t $mountpoint/" 2>&1 >> $MINDI_TMP/$$.log
2615            cp -a -n --parents `sort -u $MINDI_TMP/udev.lis` -t $mountpoint/ 2>> $MINDI_TMP/$$.log  || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2616            rm -f $MINDI_TMP/udev.lis
2617        else
2618            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2619            LogAll "         mindi will use static devices which may cause problems"
2620            rm -f $mountpoint/tmp/USE-UDEV
2621        fi
2622    fi
2623
2624    # Management of potential HW info (ProLiant only at the moment)
2625    rm -rf $MINDI_CACHE/bkphw
2626    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2627    if [ -d $MINDI_CACHE/bkphw ]; then
2628        LogIt "INFO: Hardware Information found and saved ..."
2629        cp -rp $MINDI_CACHE/bkphw .
2630        if [ -f $MINDI_CACHE/tools.files ]; then
2631            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2632            LocateDeps $lis > $MINDI_TMP/tools.lis
2633            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2634        fi
2635        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2636            mv -f $MINDI_CACHE/mindi-rsthw .
2637            chmod 755 ./mindi-rsthw
2638        fi
2639        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2640    fi
2641
2642    # Management of perl scripts delivered needed at restore time
2643    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` /usr/bin/mr-* > $MINDI_TMP/perl.lis
2644    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2645
2646    for w in cdrom groovy-stuff ; do
2647        mkdir -p mnt/$w
2648    done
2649
2650    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2651
2652    echo -en "..."
2653    cd /
2654    if [ "${kernelname}" != "" ]; then
2655        needed_modules_path=lib/modules/${kernelname}
2656    else
2657        needed_modules_path=lib/modules/$KERVERRUN
2658    fi
2659
2660    needed_modules=""
2661    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2662
2663    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2664        # For PXE boot
2665        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2666    fi
2667    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2668        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2669    fi
2670    for i in $DENY_MODS; do
2671        LogFile "INFO: Removing $i from the list of modules to load"
2672        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2673    done
2674
2675    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2676    for i in $list_of_groovy_mods ; do
2677        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2678    done
2679
2680    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2681        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2682        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2683        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2684        # Uncompress modules if not using udev and native modprobe
2685        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2686            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2687                LogFile "INFO: Uncompressing $i"
2688                gunzip -f $mountpoint/$i
2689            fi
2690        fi
2691        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2692            echo "Replacing module symlink ($i) with actual file"
2693            rm -f $mountpoint/$i
2694            cp -Lf $i $mountpoint/$i
2695            ls -l $mountpoint/$i
2696        fi
2697    done
2698
2699    # Also copy modules.* in case of udev so that normal modprobe works
2700    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2701
2702    # Copy FW in case some drivers needs it
2703    for d in "/lib" "/usr/lib"; do
2704        if [ -d "$d/firmware" -a ! -h $d ]; then
2705            cp -a "$d/firmware" "$mountpoint/$d"
2706        fi
2707    done
2708
2709    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2710    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2711        if [ -d "$d/multipath" -a ! -h $d ]; then
2712            cp -a "$d/multipath" "$mountpoint/$d"
2713        fi
2714    done
2715
2716    # Copy an additional ProLiant tool for OBDR support
2717    if [ -f $MINDI_TMP/OBDR ]; then
2718        found=0
2719        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2720            mkdir -p $mountpoint/usr/bin
2721            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2722            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2723            found=1
2724        fi
2725        if [ -x /usr/bin/sg_wr_mode ]; then
2726            mkdir -p $mountpoint/usr/bin
2727            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2728            LocateDeps $lis > $MINDI_TMP/obdr.lis
2729            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2730            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2731            found=1
2732        fi
2733        if [ $found -eq 0 ]; then
2734            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2735            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2736        fi
2737    fi
2738
2739    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2740        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2741        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2742        rm -f $mountpoint/sbin/devfsd
2743    fi
2744    cd "$old_pwd"
2745    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2746    if [ _"$MONDO_SHARE" != _"" ]; then
2747        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2748        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2749        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2750        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2751        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2752        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2753        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2754        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2755        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2756    fi
2757    mkdir -p $mountpoint/proc
2758    LogFile "---------------------------"
2759    LogFile "Content of initial ramdisk:"
2760    LogFile "---------------------------"
2761    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2762    LogFile "---------------------------"
2763
2764    # Determine what filesystem to use for initrd image
2765    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2766    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2767    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2768    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2769        # say what will be used
2770        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2771        # kernel expects linuxrc in ext2 filesystem
2772        ( cd "$mountpoint" && ln -sf usr/sbin/init linuxrc )
2773        # unmount loop filesystem and create image file using the standard approach
2774        umount $mountpoint || Die "Cannot unmount $tempfile"
2775        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2776        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2777            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2778        else
2779            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2780        fi
2781        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2782        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2783        rm -f ${rdz_fname}.tmp
2784        # log that we are done
2785        LogFile "      ...done."
2786    elif [ "$gvFileSystem" = "initramfs" ]; then
2787        # say what will be used
2788        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2789        # make sure that cpio is there
2790        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2791        # go into filesystem
2792        cd "$mountpoint"
2793        # kernel expects init in cpio filesystem
2794        ln -sf sbin/init init
2795        # create cpio image file and unmount loop filesystem
2796        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2797        cd "$old_pwd"
2798        umount $mountpoint || Die "Cannot unmount $tempfile"
2799        # log that we are done
2800        LogFile "      ...done."
2801    else
2802        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2803    fi
2804
2805    if [ "$res" -eq "0" ] ; then
2806        echo -en "..."
2807    else
2808        echo -en "\rMade an rdz WITH ERRORS.           \n"
2809    fi
2810    return 0
2811}
2812
2813
2814##############################################################################
2815#----------------------------------- Main -----------------------------------#
2816##############################################################################
2817
2818# Now we can create what we need
2819mkdir -p $MINDI_TMP
2820
2821# Purge from potential old run
2822if [ _"$MINDI_CACHE" = _"" ]; then
2823    Die "MINDI_CACHE undefined"
2824fi
2825
2826# --nolog needs to be first, and is used in analyze-my-lvm
2827if [ "$1" = "--nolog" ] ; then
2828    shift
2829    LOGFILE=/dev/stderr
2830else
2831    > $LOGFILE
2832fi
2833if [ "$1" = "--printvar" ] ; then
2834    shift
2835    if [ _"$1" != _"" ] ; then
2836        set | grep -Ew "^$1" | cut -d= -f2
2837    fi
2838    exit 0
2839fi
2840
2841LogFile "mindi v$MINDI_VERSION"
2842LogFile "$ARCH architecture detected"
2843LogFile "mindi called with the following arguments:"
2844echo "$@">> $LOGFILE
2845LogFile "Start date : `date`"
2846LogFile "-----------------------------"
2847
2848[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2849
2850# Log some capital variables
2851[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2852[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2853LogFile "MONDO_SHARE = $MONDO_SHARE"
2854LogFile "MINDI_LIB = $MINDI_LIB"
2855LogFile "MINDI_SBIN = $MINDI_SBIN"
2856LogFile "MINDI_CONF = $MINDI_CONF"
2857if [ -f $MINDI_CONFIG ]; then
2858    LogFile "-----------------------------"
2859    LogFile " Mindi configuration file    "
2860    LogFile "-----------------------------"
2861    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2862    LogFile "-----------------------------"
2863fi
2864LogFile "In Mindi"
2865LogFile "--------"
2866LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2867LogFile "BOOT_SIZE = $BOOT_SIZE"
2868LogFile "--------"
2869
2870trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2871
2872# Sanity checks
2873which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2874which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2875which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2876which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2877if which awk &> /dev/null ; then
2878    if ! which gawk &> /dev/null ; then
2879        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2880    fi
2881fi
2882which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2883[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2884
2885[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2886
2887# Update the PATH variable if incomplete
2888if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2889    PATH=$PATH:/sbin:/usr/sbin
2890    export PATH
2891    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2892    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2893    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2894fi
2895
2896if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2897    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2898fi
2899
2900### TODO
2901### Fix as it's not mandatory on ia64
2902if [ "$ARCH" = "ia64" ] ; then
2903    if which elilo &> /dev/null ; then
2904        LILO_EXE=elilo
2905    else
2906        LILO_EXE=`which false 2> /dev/null`
2907    fi
2908else
2909    FindIsolinuxBinary
2910fi
2911trap "Aborted" SIGTERM
2912DONE="\r\t\t\t\t\t\t\t\tDone.         "
2913kernelpath=""
2914MONDO_ROOT=/var/cache/mondo
2915mkdir -p $MONDO_ROOT
2916
2917if [ -d "/proc/lvm" ]; then
2918    # LVM v1
2919    LVMCMD=""
2920    LVM="v1"
2921elif [ -d "/dev/mapper" ]; then
2922    # LVM v2
2923    LVMCMD="lvm"
2924    LVM="v2"
2925else
2926    LVM="false"
2927fi
2928
2929if [ -e "/proc/cmdline" ]; then
2930    CMDLINE="/proc/cmdline"
2931elif [ -e "/tmp/cmdline" ]; then
2932    CMDLINE="/tmp/cmdline"
2933else
2934    CMDLINE="/dev/null"
2935fi
2936
2937LogFile "INFO: LVM set to $LVM"
2938LogFile "----------"
2939LogFile "mount result:"
2940LogFile "-------------"
2941mount >> $LOGFILE
2942if [ -e /etc/raidtab ]; then
2943    LogFile "-------------"
2944    LogFile "/etc/raidtab content:"
2945    LogFile "-------------"
2946    cat /etc/raidtab >> $LOGFILE
2947else
2948    LogFile "No file /etc/raidtab"
2949fi
2950if [ -e /etc/mdadm.conf ]; then
2951    LogFile "-------------"
2952    LogFile "/etc/mdadm.conf content:"
2953    LogFile "-------------"
2954    cat /etc/mdadm.conf >> $LOGFILE
2955else
2956    LogFile "-------------"
2957    LogFile "No file /etc/mdadm.conf"
2958fi
2959LogFile "-------------"
2960LogFile "cat $CMDLINE"
2961LogFile "-------------"
2962cat $CMDLINE >> $LOGFILE
2963LogFile "-------------"
2964LogFile "cat /proc/swaps:"
2965LogFile "-------------"
2966cat /proc/swaps >> $LOGFILE
2967LogFile "-------------"
2968if [ -e /proc/mdstat ]; then
2969    LogFile "cat /proc/mdstat:"
2970    LogFile "-------------"
2971    cat /proc/mdstat >> $LOGFILE
2972else
2973    LogFile "No pseudo file /proc/mdstat"
2974fi
2975LogFile "-------------"
2976LogFile "cat /proc/partitions:"
2977LogFile "-------------"
2978cat /proc/partitions >> $LOGFILE
2979LogFile "-------------"
2980LogFile "cat /proc/filesystems:"
2981LogFile "-------------"
2982cat /proc/filesystems >> $LOGFILE
2983LogFile "-------------"
2984LogFile "lsmod result:"
2985LogFile "-------------"
2986lsmod >> $LOGFILE
2987MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2988if [ -x /usr/sbin/esxcfg-module ]; then
2989    LogFile "-------------"
2990    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
2991    LogFile "-------------"
2992    LogFile "VMWare modules"
2993    LogFile "-------------"
2994    /usr/sbin/esxcfg-module -l >> $LOGFILE
2995    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2996fi
2997LogFile "Liste of extra modules is:" 
2998LogFile "-------------" 
2999LogFile "$EXTRA_MODS" 
3000LogFile "-------------" 
3001LogFile "FORCE_MODS:"
3002LogFile "-------------"
3003LogFile "$FORCE_MODS"
3004LogFile "-------------"
3005LogFile "DENY_MODS:"
3006LogFile "-------------"
3007LogFile "$DENY_MODS"
3008LogFile "-------------"
3009LogFile "df result:"
3010LogFile "----------"
3011df -aT >> $LOGFILE
3012LogFile "-------------"
3013LogFile "df -i result:"
3014LogFile "----------"
3015df -i >> $LOGFILE
3016LogFile "-------------"
3017if [ -r /boot/grub/menu.lst ]; then
3018    LogFile "-------------"
3019    LogFile "INFO: /boot/grub/menu.lst content"
3020    LogFile "-------------"
3021    cat /boot/grub/menu.lst >> $LOGFILE
3022    LogFile "-------------"
3023fi
3024if [ -r /boot/grub/grub.conf ]; then
3025    LogFile "-------------"
3026    LogFile "INFO: /boot/grub/grub.conf content"
3027    LogFile "-------------"
3028    cat /boot/grub/grub.conf >> $LOGFILE
3029    LogFile "-------------"
3030fi
3031if [ -r /boot/grub/grub.cfg ]; then
3032    LogFile "-------------"
3033    LogFile "INFO: /boot/grub/grub.cfg content"
3034    LogFile "-------------"
3035    cat /boot/grub/grub.cfg >> $LOGFILE
3036    LogFile "-------------"
3037fi
3038if [ -r /boot/grub/device.map ]; then
3039    LogFile "-------------"
3040    LogFile "INFO: /boot/grub/device.map content"
3041    LogFile "-------------"
3042    cat /boot/grub/device.map >> $LOGFILE
3043    LogFile "-------------"
3044fi
3045if [ -r /etc/lilo.conf ]; then
3046    LogFile "-------------"
3047    LogFile "INFO: /etc/lilo.conf content"
3048    LogFile "-------------"
3049    cat /etc/lilo.conf >> $LOGFILE
3050fi
3051LogFile "Full fdisk info"
3052LogFile "---------------"
3053$FDISK -l >> $LOGFILE
3054LogFile "----------------"
3055LogFile "List of extra modules is:"
3056LogFile "$EXTRA_MODS"
3057LogFile "-------------"
3058
3059# Compute libata version
3060laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3061# If libata v2 is used then remove ide-generic as it will perturbate boot
3062if [ "`echo $MODULES | grep libata`" ]; then
3063    if [ "$laver" = "2" ]; then
3064        DENY_MODS="$DENY_MODS ide-generic"
3065        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3066        LogFile "-------------"
3067    fi
3068fi
3069
3070# Check for McAfee which disturbs the access to some files (tgz in articular)
3071if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3072    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3073    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3074    LogFile "WARNING: You have two options:"
3075    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3076    LogFile "WARNING:  - Disable the scanner during the backup"
3077fi
3078
3079# Check for ISO_CMD command
3080if [ ! -x $ISO_CMD ]; then
3081    LogFile "NOTE: No CD image (ISO file) utility found"
3082fi
3083
3084FLOPPY_WAS_MOUNTED=""
3085for mtpt in /media/floppy /mnt/floppy /floppy ; do
3086    if mount | grep -w $mtpt &> /dev/null ; then
3087        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3088        umount $mtpt
3089    fi
3090done
3091
3092#
3093# If we have a USB device we need to store info
3094# and remove it from the parameters line
3095#
3096if [ "$#" -ne "0" ] ; then
3097    if [ "$1" = "--usb" ] ; then
3098        shift
3099        USBDEVICE=$1
3100        if [ _"$USBDEVICE" = _"" ]; then
3101            Die "No USB device specified"
3102        fi
3103        shift
3104    fi
3105fi
3106
3107if [ "$#" -ne "0" ] ; then
3108    if [ "$1" = "--findkernel" ] ; then
3109        resk=`TryToFindKernelPath`
3110        # Avoids logfile content for mondo
3111        export MONDO_SHARE=""
3112        if [ "$resk" = "" ] ; then
3113            if [ $KERNEL_IS_XEN = "yes" ]; then
3114                echo "$xenkernelpath"
3115                LogFile "INFO: xenkernelpath = $xenkernelpath"
3116                MindiExit 0
3117            else
3118                MindiExit -1
3119            fi
3120        else
3121            echo "$resk"
3122            LogFile "INFO: kernelpath = $resk"
3123            MindiExit 0
3124        fi
3125    elif [ "$1" = "--locatedeps" ] ; then
3126        [ ! "$2" ] && Die "Please specify the binary to look at"
3127        LocateDeps $*
3128        # Avoids logfile content for mondo
3129        export MONDO_SHARE=""
3130        MindiExit $?
3131    elif [ "$1" = "--readalllink" ] ; then
3132        [ ! "$2" ] && Die "Please specify the binary to look at"
3133        # Avoids logfile content for mondo
3134        export MONDO_SHARE=""
3135        mr-read-all-link $2
3136        MindiExit $?
3137    elif [ "$1" = "--makemessage" ] ; then
3138        MakeMessageFile | cut -c1-80
3139        MindiExit 0
3140    elif [ "$1" = "--makemountlist" ] ; then
3141        [ ! "$2" ] && Die "Please specify the output file"
3142        MakeMountlist $2
3143        CheckMountlist $2
3144        # Avoids logfile content for mondo
3145        export MONDO_SHARE=""
3146        MindiExit $?
3147    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3148        echo "Mindi v$MINDI_VERSION"
3149        # Avoids logfile content for mondo
3150        export MONDO_SHARE=""
3151        MindiExit 0
3152    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3153        MONDO_TMP=$2
3154        # Change MINDI_TMP for the one provided by mondo
3155        # So that it can get back the built files
3156        if [ _"$MONDO_TMP" = _"" ]; then
3157            Die "MONDO_TMP is empty, aborting"
3158        fi
3159        if [ _"$MONDO_TMP" = _"/" ]; then
3160            Die "MONDO_TMP is /, aborting"
3161        fi
3162        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3163        rmdir $MINDI_TMP
3164        export MINDI_TMP=$MONDO_TMP
3165        mkdir -p $MINDI_TMP
3166
3167        # This is the scratch dir in mondo - subdir images
3168        MINDI_CACHE=$3
3169
3170        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3171        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3172       
3173###
3174### Sq-Modification...
3175### Attempt to locate kernel specific module path
3176### if module path is found then use it other wise use uname -r to set it...
3177###
3178        if [ $KERNEL_IS_XEN = "yes" ]; then
3179            LogAll "INFO: xenkernelpath = $xenkernelpath"
3180        fi
3181        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3182        if [ ! -d "/lib/modules/$kernelname" ]; then
3183           LogAll "WARNING: Module path for ${kernelpath} not found..."
3184           LogAll "         using running kernel\'s modules."
3185           kernelname=$KERVERRUN
3186        else
3187           LogAll "Using modules for kernel: ${kernelname}"
3188        fi
3189        LogAll "INFO: kernelname = $kernelname"
3190        LogAll "INFO: kernelpath = $kernelpath"
3191###
3192### end of Sq-Modification
3193###
3194        TAPEDEV=$5
3195        TAPESIZE=$6
3196        FILES_IN_FILELIST=$7
3197        USE_LZO=$8
3198        CDRECOVERY=$9
3199        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3200            IMAGE_DEVS=""
3201        else
3202            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3203        fi
3204        if [ "${11}" ] ; then
3205            LILO_OPTIONS=""
3206    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3207        fi
3208        LAST_FILELIST_NUMBER=${12}
3209        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3210        export MINDI_EXCLUDE_DEVS="${14}"
3211        USE_COMP="${15}"
3212        USE_LILO="${16}"
3213        USE_STAR="${17}"
3214        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3215        DIFFERENTIAL="${19}"
3216        USE_GZIP="${20}"
3217        NOT_BOOT="${21}"
3218        [ "$USE_COMP" = "" ] && USE_COMP=yes
3219        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3220        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3221        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3222        # MONDO_ROOT is the real scratchdir
3223        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3224        if [ _"$MONDO_ROOT" != _"" ]; then
3225            mkdir -p $MONDO_ROOT
3226        else
3227            Die "MONDO_ROOT is undefined"
3228        fi
3229    else
3230        LogScreen "Syntax: mindi (--custom ....)"
3231        MindiExit -1
3232    fi
3233fi
3234
3235if [ _"$MINDI_CACHE" != _"" ]; then
3236    rm -rf $MINDI_CACHE/* 2> /dev/null
3237    mkdir -p $MINDI_CACHE
3238fi
3239
3240[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3241
3242if [ _"$MONDO_SHARE" = _"" ]; then
3243    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3244    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3245    LogIt "BusyBox sources are available from http://www.busybox.net"
3246    LogIt "------------------------------------------------------------------------------"
3247else
3248    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3249fi
3250if [ -f $MINDI_LIB/rootfs/usr/bin/busybox ]; then
3251    LogIt "Mindi-`$MINDI_LIB/rootfs/usr/bin/busybox 2>&1 | head -1`"
3252else
3253    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3254    MindiExit -1
3255fi
3256
3257for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3258    modinfo $i 2> /dev/null 1> /dev/null
3259    if [ $? -eq 0 ]; then
3260        modprobe $i 2>&1 > /dev/null
3261    fi
3262done
3263
3264KERN_DISK_MADE=""
3265
3266LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3267LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3268LogFile "NOT_BOOT = '$NOT_BOOT'"
3269if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3270    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3271    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3272    MakeMountlist $MINDI_TMP/mountlist.txt
3273    CheckMountlist $MINDI_TMP/mountlist.txt
3274    mkdir -p $MINDI_TMP/small-all/tmp
3275    cd "$MINDI_TMP/small-all"
3276    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3277    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3278    sleep 2
3279    LogIt "Done. Exiting."
3280    MindiExit 0
3281fi
3282
3283if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3284    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3285fi
3286
3287if [ "$kernelpath" = "" ] ; then
3288    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3289    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3290    read ch
3291    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3292        USE_OWN_KERNEL="yes"
3293    else
3294        USE_OWN_KERNEL="no"
3295    fi
3296    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3297        kernelpath=`TryToFindKernelPath`
3298        if [ "$kernelpath" = "" ] ; then
3299            echo -n "Please enter kernel path : "
3300            read kernelpath
3301        fi
3302    fi
3303fi
3304
3305echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3306[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3307
3308PrepareDataDiskImages
3309
3310ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3311rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3312export ramdisk_size=$rds
3313
3314LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3315if [ "$ARCH" = "ia64" ] ; then
3316    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3317else
3318    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3319fi
3320
3321[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3322...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3323
3324if [ _"$MONDO_SHARE" = _"" ]; then
3325    ListImagesForUser
3326    OfferToMakeBootableISO
3327    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3328        OfferToMakeBootableUSB
3329    fi
3330    LogAll "Finished."
3331elif [ "$TAPEDEV" ] ; then
3332    if [ "$ARCH" != "ia64" ] ; then
3333        # We need to keep the img file as boot file for ia64 platform
3334        rm -f $MINDI_CACHE/{*img,*iso}
3335    else
3336        rm -f $MINDI_CACHE/*iso
3337    fi
3338    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3339        OfferToMakeBootableUSB
3340    fi
3341    OfferToMakeBootableISO
3342    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3343        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3344    else
3345        Die "Cannot find all.tar.gz, to be written to tape"
3346    fi
3347elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3348    OfferToMakeBootableUSB
3349else
3350    OfferToMakeBootableISO
3351fi
3352# cleanup
3353LogAll "INFO: $FRIENDLY_OUTSTRING"
3354for mtpt in $FLOPPY_WAS_MOUNTED ; do
3355    mount $mtpt
3356done
3357MindiExit 0
Note: See TracBrowser for help on using the repository browser.