source: branches/3.2/mindi/mindi @ 3197

Last change on this file since 3197 was 3197, checked in by bruno, 6 years ago
  • Fix a last compile error on mondoarchive (now runs till the end)
  • Trying to improve again the nightmare brought by the move to usr :-( Still not completely done, but should be better than before (solves partly the init not found issue reported and tested here as well)
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 124.2 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3197 2013-10-01 08:25:16Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd xhci usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp_pch"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259    else
260        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261    fi
262    for included_item in $included_list ; do
263        if [ ! -e "$included_item" ] ; then
264            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266            for ii in $sss ; do
267                [ -e "$ii" ] && AddKeyboardMappingFile $ii
268            done
269        else
270            AddKeyboardMappingFile $included_item
271        fi
272    done
273}
274
275
276CopyDependenciesToDirectory() {
277    local outdir incoming counter d found tdir
278    outdir=$1
279    mkdir -p $outdir
280    incoming=`ReadLine`
281    counter=0
282    while [ "$incoming" != "" ] ; do
283        # Non absolute file names should not arrive till here => skipped
284        if [ `echo "$incoming" | cut -c1` != '/' ]; then
285            LogAll "WARNING: Unable to handle $incoming"
286            incoming=`ReadLine`
287            continue
288        fi
289        # no parent directory of incoming should be a link, copy is not possible in that case
290        d=`dirname "$incoming"`
291        found="false"
292        while [ $d != "/" -a $found = "false" ]; do
293            [ -h "$d" ] && found="true"
294            d=`dirname "$d"`
295        done
296        if [ -d "$incoming" -a ! -h "$incoming" ]; then
297            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298        elif [ -e "$incoming" ] && [ $found = "false" ]; then
299            if [ ! -h "$incoming" ]; then
300                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301            else
302                tdir=`dirname "$incoming"`
303                if [ ! -e "$outdir/$tdir" ]; then
304                    mkdir -p "$outdir/$tdir"
305                fi
306                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307            fi
308            # Only uncompress modules if not using udevd
309            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311            fi
312            [ -x "$outdir" ] && StripExecutable $outdir
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        incoming=`ReadLine`
317    done
318}
319
320
321CountItemsIn() {
322    local r
323    r=0
324    for q in $1 ; do
325        r=$(($r+1))
326    done
327    echo $r
328}
329
330
331DropOptimizedLibraries() {
332    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333    filelist=$1
334    outdir=$2
335
336    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337    if [ "$list_of_optimized_libraries" = "" ] ; then
338        return 0
339    fi
340    echo -en "Dropping i686-optimized libraries if appropriate"
341    for optimized_lib_name in $list_of_optimized_libraries ; do
342        echo -en "."
343        reason=""
344        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345        echo "$vanilla_lib_name" >> $filelist
346        LogFile "INFO: Adding $vanilla_lib_name to filelist"
347        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350        # This may return multiple files
351        for resolved in `ReadAllLink $vanilla_lib_name`; do
352            LogFile "INFO: Adding as deps $resolved to filelist"
353            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354            if [ "$vanilla_resolved_name" != "$resolved" ]; then
355                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356                rmdir $outdir$resolved > /dev/null 2> /dev/null
357                ln -sf $vanilla_resolved_name $outdir$resolved
358                LogFile "INFO: Excluding deps $resolved" 
359                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
361                echo "$vanilla_resolved_name" >> $filelist.tmp
362                mv -f $filelist.tmp $filelist
363            fi
364        done
365    done
366    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367    mv -f $filelist.tmp $filelist
368    echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373    local r res mapfile mappath included_item included_list keyfile mp locale
374    LogAll "INFO: Analyzing your keyboard's configuration."
375    KEYDIR=/lib/kbd
376    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
378    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    if [ ! -e "$KEYDIR" ] ; then
383        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
384        return 0
385    fi
386    if [ -e "/etc/sysconfig/keyboard" ] ; then
387        LogFile "INFO: Red Hat-style config detected."
388        keyfile=/etc/sysconfig/keyboard
389    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
390        LogFile "INFO: Slackware-style config detected."
391        keyfile=/etc/rc.d/rc.keymap
392    elif [ -e "/etc/rc.config" ] ; then
393        LogFile "INFO: Debian-style config detected."
394        keyfile=/etc/rc.config
395    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
396        LogFile "INFO: Debian-style config detected."
397        mkdir -p $bigdir/tmp
398        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
399        KBDEPTH=0
400        mkdir -p $bigdir/etc/console
401        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
402        echo ""
403        echo -e "$DONE"
404        return 0
405    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
406        LogFile "INFO: Ubuntu-style config detected."
407        mkdir -p $bigdir/tmp
408        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
409            kbdfile="/etc/console-setup/boottime.kmap.gz"
410        else
411            kbdfile="/etc/console-setup/cached.kmap.gz"
412        fi
413        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
414        KBDEPTH=0
415        mkdir -p $bigdir/etc/console-setup
416        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
417        echo ""
418        echo -e "$DONE"
419        return 0
420    elif [ -e "/etc/rc.conf" ] ; then
421        LogFile "INFO: ArchLinux config detected."
422        keyfile=/etc/rc.conf
423    elif [ -e "/etc/conf.d/keymaps" ] ; then
424        LogFile "INFO: Gentoo-style config detected."
425        keyfile=/etc/conf.d/keymaps
426    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
427        LogFile "INFO: X11-style config detected."
428        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
429    else
430        LogFile "Searching for rc.config ..."
431        keyfile=`find /etc -name rc.config | head -n1`
432        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
433            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
434            return
435        else
436            LogFile "INFO: Found $keyfile"
437        fi
438    fi
439    if [ ! -e "$KEYDIR/keymaps" ] ; then
440        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
441        return
442    fi
443    LogFile "INFO: keyfile=$keyfile"
444    # For SLES we need to remove the .map.gz extension Cf #614
445    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
446    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
447    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
448    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
449    LogFile "INFO: locale=$locale"
450    #
451    # Process the keymaps dir once for all
452    # AddKeyboardMappingFile will use it recursively
453    #
454    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
455    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
456    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
457    # If we have multiple keymaps then log it !!
458    echo "$mp" | grep -q " " >> $LOGFILE
459    if [ $? -eq 0 ]; then
460        LogAll "WARNING: Multiple keymaps found: $mp"
461        LogFile "INFO: The following one will be used"
462    fi
463    for i in $mp ; do
464        mappath=$i
465        [ -e "$i" ] && [ ! -d "$i" ] && break
466    done
467    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
468        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
469    fi
470    LogFile "INFO: mappath = $mappath"
471    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
473        return
474    fi
475    LogAll "INFO: Adding the following keyboard mapping tables: "
476    mkdir -p $bigdir/tmp
477    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
478    KBDEPTH=0
479    AddKeyboardMappingFile $mappath
480    echo ""
481    echo -e "$DONE"
482    rm -f $MINDI_TMP/keymaps.find
483    return 0
484}
485
486
487FindMboot32Binary() {
488    MBOOTC32=/usr/lib/syslinux/mboot.c32
489    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
490    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
491    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
492    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
493    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
494    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
495    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
496    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
497}
498
499FindIsolinuxBinary() {
500    ISOLINUX=/usr/lib/isolinux.bin
501    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
502    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
503    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
504    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
505    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
506    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
507    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
508    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
509}
510
511
512FindSpecificModuleInPath() {
513    local modpaths pwd line
514    pwd=`pwd`
515    if [ "$YOUR_KERNEL_SUCKS" ] ; then
516        cd "$MINDI_TMP"
517    else
518        cd /
519    fi
520    if [ ! -e "$1" ] ; then
521        LogAll "WARNING: cannot search specific path '$1'"
522        return 1
523    fi
524    # Find all files and links (required for some VMWare VMs)
525    modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
526    echo "$modpaths"
527    cd "$pwd"
528}
529
530
531GenerateGiantDependencyList() {
532    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
533
534    echo -en "Analyzing dependency requirements"
535    outfile=$1
536    tempfile=$MINDI_TMP/$$.txt
537    incoming=`ReadLine`
538
539    > $tempfile
540    progress=0
541    res=0
542    noof_lines=$2
543    while [ "$incoming" != "" ] ; do
544        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
545            incoming=`ReadLine`
546            continue
547        fi
548        if [ "$incoming" = "LVMFILES:" ] ; then
549            break
550        fi
551        filelist=`GenerateListForFile "$incoming"`
552        r=$?
553        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
554        res=$(($res+$r))
555#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
556        for fname in $filelist ; do
557            [ "$fname" != "" ] && echo "$fname" >> $tempfile
558        done
559        progress=$(($progress+1))
560        LogProgress $progress $noof_lines
561        incoming=`ReadLine`
562    done
563    if  [ "$incoming" = "LVMFILES:" ] ; then
564        incoming=`ReadLine`
565        lvmversion=""
566        while [ "$incoming" != "" ] ; do
567            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
568                incoming=`ReadLine`
569                continue
570            fi
571            filelist=`GenerateListForFile "$incoming"`
572            for tool in $filelist ; do
573                lvmresolved=`readlink -f $tool`
574                if [ "$tool" = "$lvmresolved" ]; then
575                    echo "$tool" >> $tempfile
576                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
577                    if [ "$lvmversion" = "" ] ; then
578                        lvmversion=`$lvmresolved`
579                        echo "$lvmresolved" >> $tempfile
580                    fi
581                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
582                    if [ "$lvmversion" = "200" ]; then
583                        # pvdata and lvmcreate_initrd don't exist in LVM2
584                        case "$toolstripped" in
585                        "pvdata")
586                            continue
587                            ;;
588                        "lvmcreate_initrd")
589                            continue
590                            ;;
591                        esac
592                    fi
593                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
594                    if [ -e "$toolpath" ] ; then
595                        echo "$toolpath" >> $tempfile
596                        echo "$tool" >> $tempfile
597                    else
598                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
599                    fi
600                    if [ -e "$toolpath" ] ; then
601                        echo "$toolpath" >> $tempfile
602                        echo "$tool" >> $tempfile
603                    else
604                        echo "Where are your LVM-Tools? Couldn't find $tool"
605                    fi
606                else
607                    echo "$tool" >> $tempfile
608                fi
609            done
610            progress=$(($progress+1))
611            LogProgress $progress $noof_lines
612            incoming=`ReadLine`
613        done
614    fi
615    echo -en "$DONE\nMaking complete dependency list"
616
617    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
618    mv -f $tempfile.new $tempfile
619    > $outfile.pre
620    progress=0
621    noof_lines=`cat $tempfile | wc -l`
622    LogFile "---------------------------------"
623    LogFile "List of dependencies:             "
624    LogFile "---------------------------------"
625    for fname in `cat $tempfile` ; do
626        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
627        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
628        progress=$(($progress+1))
629        LogProgress $progress $noof_lines
630    done
631    if [ _"$MONDO_SHARE" != _"" ]; then
632        mkdir -p $bigdir/tmp
633        mkdir -p $bigdir/usr/bin
634        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
635            LogAll "\nINFO: Incorporating post-nuke tarball"
636            old_pwd=`pwd`
637            cd "$bigdir"
638            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
639            cd "$old_pwd"
640        fi
641        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
642            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
643        else
644            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
645            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
646            LogIt "       If Mindi was called by Mondo then send me a bug report."
647            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
648            LogIt "       Finally, run Mindi again."
649            Die "Odd."
650        fi
651        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
652        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
653            LogAll "\nINFO: Incorporating Network-related settings"
654            for r in NETFS-* ISO-PREFIX ; do
655                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
656                LogFile "INFO: Copying $r to ramdisk"
657            done
658        fi
659    fi
660    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
661    rm -f $tempfile $outfile.pre
662    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
663    return $res
664}
665
666
667GenerateListForFile() {
668    local files_found loc fname incoming i res
669    incoming="$1"
670    files_found=""
671    res=0
672
673    for fname in $incoming ; do
674        files_found="$files_found `LocateFile $fname`"
675    done
676
677    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
678}
679
680
681# Returns all disk devices which are part of a raid array
682GetAllRaidMembers() {
683    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
684}
685
686
687GetFileSizeList() {
688    local i
689    for i in `find $1 -type d -o -print` ; do
690        du -sk $i
691    done
692}
693
694
695# Check kernel filesystem capabilites for accessing initrd image
696# Could be ext2 FS (old mode) or initramfs (new mode)
697#
698# Interface definition:
699# param #1: absolute path to kernel image
700GetInitrdFilesystemToUse() {
701
702    # interface test: make sure we have one parameter
703    if [ $# -ne 1 ]; then
704        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
705    fi
706
707    # interface parameters
708    local lvKernelImage=$1
709
710    # local constants (filesystem magic strings)
711    local lcMagicCramfs="<3>cramfs: wrong magic"
712    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
713    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
714    local lcMagicInitfs="<6>checking if image is initramfs...|[<]6[>]Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
715
716    # local variables
717    local lvOffset
718    local lvScanRes
719    local lvUseFilesystem
720
721    # say where we are.
722    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
723
724    # verify that file exists
725    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
726
727    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
728    file $lvKernelImage 2>&1 | grep -q gzip
729    if [ $? -eq 0 ]; then
730        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
731        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
732    else
733        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
734        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
735        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
736        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
737        if [ $lvOffset -eq 0 ]; then
738            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
739            lvScanRes=$lcMagicInitfs
740        else
741            lvOffset=`expr $lvOffset / 2`
742            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
743            # scan again  kernel image
744            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
745        fi
746    fi
747
748    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
749    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
750        lvUseFilesystem="ext2fs"
751    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
752        lvUseFilesystem="ext3fs"
753    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
754        lvUseFilesystem="initramfs"
755    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
756        lvUseFilesystem="cramfs"
757    else
758        # In that case, we are most probably after 2.6.30 and use the supported initramfs
759        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
760        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
761        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
762        lvUseFilesystem="initramfs"
763    fi
764
765    # say what we are using
766    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
767
768    # return file system to use
769    echo "$lvUseFilesystem"
770
771}
772
773# Searches members of raid device
774# $1: raid device (/dev/md...)
775GetRaidDevMembers() {
776    if [ ! -f /etc/raidtab ]; then 
777        return
778    fi
779    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
780}
781
782
783HackPathsToFailsafe() {
784    local incoming newpath stub i pwd
785    incoming=`ReadLine`
786    pwd=`pwd`
787    cd "$MINDI_TMP"
788    while [ "$incoming" != "" ] ; do
789        stub=`basename $incoming`
790        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
791        for i in $newpath ; do
792            echo "$i"
793        done
794        read incoming
795    done
796    cd "$pwd"
797}
798
799
800ListAllPartitions() {
801    local res currline partition all_partitions ap_orig remaining i j
802
803    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
804    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
805    if [ -e "/vmfs/volumes" ]; then
806        # For VMWare ESX 3 get the device names of these volumes
807        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
808    fi
809    return
810}
811
812
813ListImagesForUser() {
814    local path fname
815    path=$MINDI_CACHE
816    echo -en "In the directory '$path' you will find the images:-\n"
817    for fname in `ls $path | grep -F mindi-` ; do
818        printf "%19s " $fname
819    done
820    echo " "
821}
822
823
824ListKernelModulePaths() {
825    local module_list module fname r kern
826    module_list="$MODULES"
827    # Remove unwanted modules from list
828    for i in $DENY_MODS; do
829        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
830        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
831    done
832###
833### Sq-Modification ... Use kernelname for module search path if specified
834###
835    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
836    then
837        kern=${kernelname}
838    else
839        kern="$KERVERRUN"
840    fi
841    export KERVER=$kern
842###
843### Sq-Mod End
844###
845    # Get rid of duplicates, so that if a live kernel module also appears
846    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
847    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
848        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
849        if [ -z "$r" ]; then
850            if [ "`echo "$MODULES" | grep -w $module`" ]; then
851                r="[live module file not found]"
852            else
853                r="[extra module file not found]"
854            fi
855        else
856            [ -f "$r" ] && echo "$r"
857        fi
858        LogFile "INFO: module $module --> $r"
859    done
860    find /lib/modules/$kern/modules.* -type f 2> /dev/null
861}
862
863#
864# Critical function which computes all dependencies (dyn. lib.)
865# for a list of binaries
866#
867LocateDeps() {
868    local incoming fname deps
869    incoming="$*"
870    for fname in $incoming ; do
871        if [ ! -e "$fname" ] ; then
872            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
873            if echo $fname | grep lvm &> /dev/null ; then
874                LogFile "          This warning only affects you if you are using LVM."
875                if echo "$MODULES" | grep lvm &> /dev/null ; then
876                    LogFile "          I think you are, so please take heed!"
877                else
878                    LogFile "          I don't think you are, so don't worry about it."
879                fi
880            fi
881        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
882            newf=`readlink -f $fname`
883            LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
884            ldd $newf 2> /dev/null | ProcessLDD
885        else
886            ldd $fname 2> /dev/null | ProcessLDD
887        fi
888    done
889}
890
891
892# Give all symlinks recursively of a full path name
893ReadAllLink() {
894    file="$1"
895
896    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
897        # We need to normalise the path with .. in it
898        file=`echo $file | perl -pi -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
899    done
900    echo "$file"
901    if [ ! -h $file ]; then
902        return 0
903    fi
904
905    link=`readlink $file`
906    d=`dirname $file`
907    # Is link a relative or full path name
908    fchar=`echo $link | cut -c1`
909    # If mother dir is a link print it
910    if [ -h "$d" ]; then
911        echo "$d"
912        d2=`readlink $d`
913        c2=`echo $d2 | cut -c1`
914        if [ "$c2" != "/" ]; then
915            if [ "$c2" != "." ]; then
916                d="/$d2"
917            else
918                d="$d/$d2"
919            fi
920        fi
921    fi
922    if [ "$fchar" != "/" ]; then
923        # Relative or local link
924        ReadAllLink "$d/$link" 
925    else
926        # Absolute path
927        ReadAllLink $link 
928    fi
929}
930
931
932LocateFile() {
933    local i path fname_to_find location output resolved tmp stub cache_id loclist
934    fname_to_find="$1"
935    # It's an absolute path
936    if echo "$fname_to_find" | grep -x "/.*" ; then
937        output="$fname_to_find"
938        if [ -h "$output" ] ; then
939            output="`ReadAllLink $output` $output"
940        fi
941        echo "$output"
942        return 0
943    fi
944    # It's not an absolute path
945    output=""
946    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
947    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
948        [ -h "$path" ] && continue
949        [ ! -e "$path/$fname_to_find" ] && continue
950        output="$path/$fname_to_find $output"
951        if [ -h "$path/$fname_to_find" ] ; then
952            output="`ReadAllLink $path/$fname_to_find` $output"
953        fi
954    done
955    if [ "$output" = "" ] ; then
956        return 1
957    fi
958    echo "$output"
959    return 0
960}
961
962LogProgress() {
963    local i progress modres noof_lines
964 
965    progress=$1
966    noof_lines=$2
967
968    echo -en "\r\t\t\t\t\t\t\t\t"
969    i=$(($progress*100))
970    if [ $noof_lines -ne 0 ]; then
971        i=$(($i/$noof_lines))
972    else
973        i=0
974    fi
975    echo -en "$i"
976    echo -en "%"
977    modres=$(($progress%4))
978    [ "$modres" -eq "0" ] && echo -en "\t/"
979    [ "$modres" -eq "1" ] && echo -en "\t-"
980    [ "$modres" -eq "2" ] && echo -en "\t\\"
981    [ "$modres" -eq "3" ] && echo -en "\t|"
982}
983
984# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
985MakeMondoConfigFile() {
986    local outfile use_lzo use_comp use_star
987    outfile=$1
988    > $outfile
989    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
990    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
991    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
992    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
993    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
994    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
995    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
996    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
997    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
998    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
999    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1000    echo "use-lzo $use_lzo" >> $outfile
1001    echo "use-gzip $use_gzip" >> $outfile
1002    echo "use-star $use_star" >> $outfile
1003    echo "use-lzma $use_lzma" >> $outfile
1004    echo "use-comp $use_comp" >> $outfile
1005    echo "datestamp `date`" >> $outfile
1006    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1019    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1020    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1021    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1022    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1023    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1026    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1027    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1028    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1029    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1030    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1031    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1032}
1033
1034# Get PV's for an LV
1035GetPVsForLV() {
1036  if [ -n "$1" ]; then
1037    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1038    if [ -z "$vg" ]; then
1039      return
1040    fi
1041    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1042  fi
1043}
1044
1045
1046MakeMountlist() {
1047    local mountlist all_partitions current_partition \
1048partition_size partition_format outstring partition_number \
1049partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1050absolute_partition old_partition_fmt current_lvolume uname skip
1051
1052    LogFile "------------------------------------"
1053    LogFile "Your raw fstab file looks like this:"
1054    LogFile "------------------------------------"
1055    cat $MY_FSTAB >> $LOGFILE
1056    LogAll "-----------------------------------"
1057    LogAll "Your mountlist will look like this:"
1058    LogAll "-----------------------------------"
1059
1060# mountlist(OUT)
1061    mountlist=$1
1062
1063# NB: partition = device
1064# NB: mountpt = where the device is mounted
1065
1066    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1067
1068    [ "$mountlist" != "" ] && rm -Rf $mountlist
1069    > $mountlist
1070    all_partitions=""
1071   
1072    if [ $LVM != "false" ]; then
1073        LogAll "INFO: Analyzing LVM..."
1074        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1075        if [ $? -ne 0 ]; then
1076            LVM="false"
1077        fi
1078        # Excluded LVs and GVs are not reported here
1079        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1080    fi
1081    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1082    for i in $IMAGE_DEVS ; do
1083        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1084    done
1085    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1086    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1087    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1088    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1089    for c_p in $all_partitions ; do
1090        # Skip fd/cd devices, network FS, cifs
1091        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1092        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1093        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1094            current_partition=`readlink -f $c_p`
1095            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1096                current_partition="$c_p"
1097            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1098                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1099                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1100            fi
1101            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1102        else
1103            current_partition="$c_p"
1104        fi
1105        [ "$c_p" = "none" ] && continue
1106        redhat_label=""
1107        label=""
1108        uuid=""
1109        absolute_partition=`readlink -f $c_p`
1110        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1111
1112        # set default in case we dont't find it
1113        str_to_find_fmt_with=$current_partition
1114
1115        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1116        # current_partition contains only first column of /etc/fstab
1117        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1118            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1119            actual_dev=""
1120
1121            # 1st try, findfs - the RHEL way of finding labels and their partitions
1122            if [ -x "/sbin/findfs" ]; then
1123                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1124            fi
1125   
1126            # 2nd try : blkid, the good way for all LABEL except swap
1127            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1128                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1129                # For LVM FS it will give a /dev/dm-# which should then be converted
1130                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1131                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1132                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1133                    for dev in `ls /dev/mapper/*`; do
1134                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1135                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1136                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1137                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1138                            break
1139                        fi
1140                    done
1141                fi
1142            fi
1143   
1144            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1145            # For LVM gives a /dev/mapper entry
1146            if [ "x$actual_dev" = "x" ]; then
1147                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1148            fi
1149   
1150            # 4th try, with vol_id
1151            # SWAP only
1152            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1153                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1154                for dev_swap in $list_swaps ; do
1155                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1156                    if [ "x$dev_exists" != "x" ]; then
1157                        actual_dev=$dev_swap
1158                        break;
1159                    fi
1160                done
1161            fi
1162
1163            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1164            # LABEL=SW-cciss/c0d0p3 (RDP)
1165            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1166            # SWAP only
1167            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1168                    skip=""
1169                    uname=$KERVERRUN
1170                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1171                    # 2.6.12 needs 16 (FC3)
1172                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1173                    # 2.6.19 and upper needs 1052
1174                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1175                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1176                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1177                    if [ $skip = "" ]; then
1178                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1179                    fi
1180                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1181                    do
1182                        # Location of the swap label for kernel 2.6
1183                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1184                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1185                            actual_dev=$try_dev
1186                        fi
1187                    done
1188            fi
1189
1190            # Check if one of all those tries has known success
1191            if [ "x$actual_dev" != "x" ]; then
1192                current_partition=$actual_dev
1193            else
1194                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1195            fi
1196        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1197        # current_partition contains only first column of /etc/fstab
1198        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1199            uuid=`echo "$current_partition" | cut -d'=' -f2`
1200            actual_dev=""
1201
1202            # 1st try, findfs - the RHEL way of finding labels and their partitions
1203            if [ -x "/sbin/findfs" ]; then
1204                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1205            fi
1206   
1207            # 2nd try : blkid, the good way for all UUID except swap
1208            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1209                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1210                # For LVM FS it will give a /dev/dm-# which should then be converted
1211                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1212                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1213                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1214                    for dev in `ls /dev/mapper/*`; do
1215                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1216                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1217                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1218                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1219                            break
1220                        fi
1221                    done
1222                fi
1223            fi
1224   
1225            # 3th try, with vol_id
1226            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1227                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1228                for dev in $list_dev ; do
1229                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1230                    if [ "x$dev_exists" != "x" ]; then
1231                        actual_dev=$dev
1232                        break;
1233                    fi
1234                done
1235            fi
1236
1237            # 4th try, with dumpuuid (VMWare only ?) for swap
1238            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1239                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1240                for dev in $list_dev ; do
1241                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1242                    if [ "x$dev_exists" != "x" ]; then
1243                        actual_dev=$dev
1244                        break;
1245                    fi
1246                done
1247            fi
1248
1249            # Check if one of all those tries has known success
1250            if [ "x$actual_dev" != "x" ]; then
1251                current_partition=$actual_dev
1252            else
1253                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1254            fi
1255        else
1256            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1257            # they use symlinks in fstab unrelated to what is shown in mount !
1258            if [ _"$partition_mountpt" = _"" ]; then
1259                # set default in case we dont't find it
1260                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1261                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1262                            str_to_find_fmt_with=$tmpp
1263                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1264                            break;
1265                        fi
1266                done
1267            fi
1268        fi
1269
1270        # Detects noauto partitions not mounted and exclude them
1271        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1272        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1273                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1274            continue
1275        fi
1276        # Detects bind partitions and exclude them
1277        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1278                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1279            continue
1280        fi
1281
1282        # Look for devices which have to be excluded
1283        skip=0
1284        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1285            l=""
1286            list_of_devices="`ReadAllLink $current_partition`"
1287            for d in $list_of_devices; do
1288                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1289            done
1290
1291            # Remove PVs from LVs excluded
1292            l="$l `GetPVsForLV $current_partition`"
1293
1294            # We want a single unique list
1295            list_of_devices="`echo $l | sort -u`"
1296
1297            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1298                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1299                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1300                    skip=1
1301                    continue
1302                fi
1303            done
1304        fi
1305        if [ $skip -eq 1 ]; then
1306            continue
1307        fi
1308
1309        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1310        # Detects iso9660 ISO images and exclude them
1311        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1312                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1313            continue
1314        fi
1315        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1316        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1317        # the former is then a link to the latter, so we test whether
1318        # $current_partition is actually such a link or not and set
1319        # $current_lvolume accordingly. On Debian you may find more than one answer
1320        # so we remove the one corresponding to /dev/.static
1321        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1322        # principle is the same and we need to find the link to it as well.
1323        # Note that $current_lvolume may well be an
1324        # ordinary device. It is just to make sure that we feed the right value
1325        # into any of the LVM tools if possible.
1326
1327        current_lvolume="$current_partition"
1328        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1329            # .static dir are a Debian specificity
1330            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1331            echo $current_lvolume | grep -q ' '
1332            if [ $? -eq 0 ]; then
1333                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1334            fi
1335            # if it's not found, it may well be a real device such as a multipath one
1336            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1337            if [ _"$current_lvolume" = _"" ]; then
1338                current_lvolume="$current_partition"
1339            fi
1340        fi
1341        #
1342        # End of LVM device style variation code (other than $current_lvolume).
1343
1344        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1345            # Size computed via LVM not directly
1346            partition_size="lvm"
1347        else
1348            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1349            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1350            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1351                # Skip swap files
1352                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1353                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1354                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1355                [ "$partition_format" != "swap" ] && partition_format="swap"
1356                if [ "$partition_size" = "" ] ; then
1357                    totalsize=0
1358                    items=0
1359                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1360                        totalsize=$(($totalsize+$i))
1361                        items=$(($items+1))
1362                    done
1363                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1364                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1365                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1366                fi
1367            else
1368                partition_size=`SizeOfPartition $current_partition`
1369            fi
1370        fi
1371        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1372        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1373        if [ "$partition_mountpt" = "" ] ; then
1374            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1375                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1376                    partition_mountpt="raid"
1377                    partition_format="raid"
1378                else
1379                    partition_mountpt="lvm"
1380                    partition_format="lvm"
1381                fi
1382            fi
1383        fi
1384        psz=$partition_size
1385        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1386        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1387        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1388            partition_mountpt="image"
1389            old_partition_fmt=$partition_format
1390            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1391            partition_size=$(($partition_size+1)); # just in case
1392            if [ "$partition_format" = "Linux" ] ; then
1393                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1394                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1395                partition_format=$old_partition_fmt
1396            fi
1397        fi
1398
1399        if [ ! "$partition_mountpt" ] ; then
1400            LogFile "------- $FDISK -l $qq log ------------"
1401            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1402                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1403                [ "$partition_format" ] && break
1404            done
1405            LogFile "------- $FDISK log end ------------"
1406            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1407                partition_format="compaq"
1408            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1409                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1410                continue
1411            fi
1412        fi
1413        if [ "$redhat_label" ]; then
1414            label="$redhat_label"
1415        elif [ "$uuid" ]; then
1416            label="$uuid"
1417        fi
1418        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1419        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1420        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1421        if [ "$current_partition" = "" ] ; then
1422            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1423        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1424            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1425                partition_mountpt=raid
1426                partition_format=raid
1427                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1428                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1429            else
1430                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1431            fi
1432        elif [ "$partition_format" = "" ] ; then
1433            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1434        elif [ "$partition_size" = "" ] ; then
1435            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1436        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1437            continue
1438        else
1439            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1440                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1441                partition_format="vfat"
1442            fi
1443            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1444            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1445        fi
1446    done
1447    LogAll "-----------------------------------" 
1448}
1449
1450CheckMountlist() {
1451    local file=$1
1452    # Coherency verification
1453    ML01=`cat $file | wc -l`
1454    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1455    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1456    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1457    if [ "$ML01" -ne "$ML1" ]; then
1458        LogFile "--------------------------------------------"
1459        LogAll "WARNING: Duplicate device entry in mountlist"
1460        LogFile "--------------------------------------------"
1461    fi
1462    if [ "$ML02" -ne "$ML2" ]; then
1463        LogFile "--------------------------------------------"
1464        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1465        LogFile "------------------------------------------------"
1466    fi
1467}
1468
1469OfferToMakeBootableISO() {
1470    local i old_pwd
1471    if [ -z "$ISO_CMD" ]; then
1472        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1473        return
1474    fi
1475    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1476        echo -en "Shall I make a bootable CD image? (y/[n]) "
1477        read i
1478        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1479    fi
1480    rm -Rf $MINDI_TMP/iso
1481    mkdir -p $MINDI_TMP/iso/{images,archives}
1482    LogFile "INFO: mindi_lib = $MINDI_LIB"
1483    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1484    for i in memdisk memtest.bin memtest.img ; do
1485        j=$MINDI_LIB/$i
1486        k=$MINDI_TMP/iso
1487        if [ -e "$j" ] ; then
1488            LogAll "INFO: Copying $j to $k"
1489            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1490            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1491            if [ _"$MONDO_SHARE" != _"" ]; then 
1492                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1493            fi
1494        fi
1495    done
1496    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1497    if [ $KERNEL_IS_XEN = "yes" ]; then
1498        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1499        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1500    fi
1501    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1502    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1503
1504    if [ _"$MONDO_SHARE" != _"" ]; then 
1505        if [ $KERNEL_IS_XEN = "yes" ]; then
1506            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1507            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1508        fi
1509        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1510        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1511    fi
1512    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1513    if [ "$ARCH" != "ia64" ] ; then
1514        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1515    fi
1516    old_pwd=`pwd`
1517    cd "$MINDI_TMP/iso"
1518    if [ "$ARCH" != "ia64" ] ; then
1519        if [ _"$MONDO_SHARE" != _"" ]; then 
1520            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1521            if [ $KERNEL_IS_XEN = "yes" ]; then
1522                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1523            fi
1524            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1525        fi
1526        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1527    else
1528        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1529    fi
1530    if [ "$?" -ne "0" ] ; then
1531        LogFile "----------- $ISO_CMD's errors --------------"
1532        LogAll "$ISO_CMD returned the following errors:"
1533        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1534        LogAll "ERROR: Failed to create ISO image."
1535    else
1536        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1537    fi
1538    rm -f $MINDI_TMP/mkisofs.log
1539    cd "$old_pwd"
1540}
1541
1542
1543OfferToMakeBootableUSB() {
1544    local i
1545    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1546        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1547        read i
1548        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1549        if [ "$USBDEVICE" = "" ]; then
1550            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1551            read dev
1552            USBDEVICE=$dev
1553        fi
1554        echo "WARNING: This will erase all content on $USBDEVICE"
1555        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1556        read i
1557        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1558    fi
1559    rm -Rf $MINDI_TMP/usb
1560    mkdir -p $MINDI_TMP/usb
1561    USBPART="${USBDEVICE}1"
1562
1563    echo -en "Transforming $USBDEVICE in a Bootable device " 
1564    echo -en "."
1565    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1566    LogFile "INFO: Checking $USBDEVICE"
1567    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1568    if [ $? -ne 0 ]; then
1569        LogAll "ERROR: Unable to access $USBDEVICE"
1570        LogAll "       Make sure your USB device is plugged in"
1571        MindiExit -1
1572    fi
1573    echo -en "."
1574    # Some distro do auto mount at that point (Ubuntu)
1575    LogFile "INFO: Unmounting $USBPART just in case"
1576    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1577    # If your key has no MBR it may cause an issue
1578    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1579    if [ -r $MBRFILE ]; then
1580        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1581        dd if=$MBRFILE of=$USBDEVICE
1582    else
1583        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1584        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1585    fi
1586    LogFile "INFO: Preparing $USBDEVICE"
1587    cat > $MINDI_TMP/fdisk.txt << EOF
1588d
1589d
1590d
1591d
1592n
1593p
15941
1595
1596
1597t
1598b
1599a
16001
1601w
1602EOF
1603    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1604    if [ $? -ne 0 ]; then
1605        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1606        LogAll "       Make sure your USB device is plugged in"
1607        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1608        MindiExit -1
1609    fi
1610    LogFile "fdisk build file"
1611    LogFile "----------------"
1612    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1613    LogFile "----------------"
1614    rm -f $MINDI_TMP/fdisk.txt
1615    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1616    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1617    echo -en "."
1618    # Calling kpartx in case devices were not created
1619    if [ -x "/sbin/kpartx" ]; then
1620        /sbin/kpartx -a $USBDEVICE
1621    fi
1622    # Some distro do auto mount at that point (Ubuntu)
1623    LogFile "INFO: Unmounting $USBPART just in case again"
1624    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1625    echo -en "."
1626    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1627    if [ "`which dmsetup`" != "" ]; then
1628        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1629        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1630            LogFile "INFO: Removing $block_id from device mapper."
1631            sleep 1
1632            dmsetup remove $block_id
1633        fi
1634    fi
1635    echo -en "."
1636    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1637    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1638    if [ $? -ne 0 ]; then
1639        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1640        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1641        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1642        MindiExit -1
1643    fi
1644    echo -en "."
1645    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1646    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1647    if [ $? -ne 0 ]; then
1648        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1649        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1650        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1651        MindiExit -1
1652    fi
1653    echo -en "."
1654    mkdir -p $MINDI_TMP/usb/images
1655    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1656    echo -en "."
1657    LogFile "INFO: mindi_lib = $MINDI_LIB"
1658    for i in memdisk memtest.bin memtest.img ; do
1659        j=$MINDI_LIB/$i
1660        k=$MINDI_TMP/usb
1661        if [ -e "$j" ] ; then
1662            LogIt "INFO: Copying $j to $k"
1663            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1664            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1665        fi
1666    done
1667    echo -en "."
1668    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1669    echo -en "."
1670    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1671    echo -en "."
1672    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1673    echo -en "."
1674    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1675    echo -en "."
1676    LogAll "----------- syslinux's conf --------------"
1677    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1678    LogAll "------------------------------------------"
1679    umount $MINDI_TMP/usb
1680    if [ "$ARCH" != "ia64" ] ; then
1681        syslinux -v 2>&1 | grep -q 4.02
1682        if [ $? -eq 0 ]; then
1683            # This buggy version of syslinux requires a call to --stupid and not -s
1684            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1685            res=$?
1686        else
1687            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1688            res=$?
1689        fi
1690        if [ $res -ne 0 ] ; then
1691            LogAll "----------- syslinux's errors --------------"
1692            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1693            LogAll "------------------------------------------"
1694            LogIt "ERROR: Failed to create USB image."
1695        else
1696            echo -e "$DONE"
1697            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1698        fi
1699        rm -f $MINDI_TMP/syslinux.log
1700    else
1701        LogAll "ERROR: No USB boot support for ia64"
1702        MindiExit -1
1703    fi
1704}
1705
1706
1707MakeMessageFile() {
1708   
1709    if [ -x "/bin/lsb_release" ]; then
1710        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1711    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1712        DESC="Arch Linux"
1713        if [ -r /var/log/pacman.log ]; then
1714            # there are no releases but we can get the last system upgrade
1715            # Output example:   Arch Linux [2011-03-03 01:39]
1716            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1717        fi
1718    elif [ -r /etc/issue.net ]; then
1719        DESC=`head -1 /etc/issue.net`
1720    elif [ -r /etc/issue ]; then
1721        DESC=`head -1 /etc/issue`
1722    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1723        # For pb >= 0.9.8
1724        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1725    else
1726        DESC="Unknown desc"
1727    fi
1728    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1729    if [ _"$MONDO_SHARE" != _"" ]; then
1730        if [ "$CDRECOVERY" != "yes" ] ; then
1731            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1732                echo -en "Press <enter> to continue.\n"
1733            elif [ ! "$MINDI_TMP" ] ; then
1734                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1735                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1736                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1737                fi
1738            else
1739                echo -en "$BOOT_MEDIA_MESSAGE"
1740            fi
1741        else
1742            echo -en "\
1743To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1744CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1745        fi
1746    fi
1747
1748    # Also create the other help screens
1749    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1750    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1751    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1752}
1753
1754
1755MakeBootConfFile() {
1756    local options i ooo
1757    options=""
1758    # Type of boot file (elilo or syslinux/isolinux)
1759    type=$1
1760    if [ "$type" = "elilo" ]; then
1761        sep="="
1762    else
1763        sep=" "
1764    fi
1765
1766    # Generic header for conf file
1767    if [ "$type" != "elilo" ] ; then
1768        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1769    else
1770        echo -en "prompt\n"
1771    fi
1772
1773    # Compute which default option to boot from
1774    if [ "$CDRECOVERY" = "yes" ] ; then
1775        echo -en "default${sep}RESTORE\n"
1776    # In case it's mondoarchive
1777    elif [ _"$MONDO_SHARE" != _"" ]; then
1778        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1779            echo -en "default${sep}iso\n"
1780        else
1781            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1782        fi
1783    else
1784        echo -en "default${sep}expert\n"
1785    fi
1786
1787    # Handle timeout
1788    if [ "$CDRECOVERY" != "yes" ] ; then
1789        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1790    else
1791        echo -en "timeout${sep}10000\n"
1792    fi
1793    echo -en "\n"
1794
1795    # prepare which labels will be generated
1796    if [ "$CDRECOVERY" = "yes" ] ; then
1797        options="RESTORE expert"
1798    else
1799        if [ _"$MONDO_SHARE" != _"" ]; then
1800            options="interactive expert compare iso nuke isonuke"
1801        else
1802            options="expert"
1803        fi
1804    fi
1805
1806    # Generate rest of conf file
1807    for i in $options ; do
1808        ooo=$i
1809        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1810        if [ "$type" = "elilo" ]; then
1811            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1812        else
1813            ps="/"
1814            if [ "$type" = "syslinux" ]; then
1815                ps=""
1816            fi
1817            if [ $KERNEL_IS_XEN = "no" ]; then
1818                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1819            else
1820                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1821            fi
1822        fi
1823        echo -en "$outstr"
1824    done
1825    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1826        if [ "$type" = "elilo" ]; then
1827            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1828            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1829        else
1830            ps="/"
1831            if [ "$type" = "syslinux" ]; then
1832                ps=""
1833            fi
1834            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1835            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1836        fi
1837    fi
1838}
1839
1840
1841PrepareBootDiskImage_LILO() {
1842    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1843    imagesdir=$MINDI_CACHE
1844    kernelpath=$1
1845
1846    retval=0
1847
1848    old_pwd=`pwd`
1849    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1850    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1851    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1852    echo -en "..."
1853    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1854    mountpoint=$MINDI_TMP/mountpoint.$$
1855    mkdir -p $mountpoint
1856    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1857    LogFile "Creating vfat filesystem on $imagefile" 
1858    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1859    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1860
1861    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1862    mkdir -p $mountpoint/etc
1863    liloconf=$mountpoint/elilo.conf
1864
1865    MakeBootConfFile elilo > $liloconf
1866
1867    # Copy it so that CD-ROM menu entry is satisfied
1868    mountefi=0
1869    df -T | grep /boot/efi | grep -q vfat
1870    if [ $? -ne 0 ]; then
1871        mount /boot/efi
1872        if [ $? -ne 0 ]; then
1873            echo "You have to mount your EFI partition when using mindi"
1874            MindiExit -1
1875        fi
1876        mountefi=1
1877    fi
1878    el=`find /boot/efi -name elilo.efi`
1879    cp $el $mountpoint
1880    cp $liloconf $mountpoint
1881    if [ $mountefi -eq 1 ]; then
1882        umount /boot/efi 2>&1 > /dev/null
1883    fi
1884
1885    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1886    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1887    if [ "$?" -ne "0" ] ; then
1888        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1889        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1890        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1891        rm -f $MINDI_TMP/mtpt.$$
1892        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1893        retval=$(($retval+1))
1894    fi
1895    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1896
1897    mkdir -p $mountpoint/tmp
1898    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1899        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1900    fi
1901
1902    # copy the kernel across
1903    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1904    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1905    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1906    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1907    if [ "$?" -ne "0" ] ; then
1908        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1909        du -sk $mountpoint/* >> $LOGFILE
1910        LogFile "--- end of list of files ---"
1911        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1912        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1913        cd "$old_pwd"
1914        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1915        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1916    #   losetup /dev/loop0 -d
1917        [ "$imagefile" != "" ] && rm -f $imagefile
1918        LogIt "ERROR: Sorry, your kernel is too big for your image"
1919        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1920        return 0
1921    fi
1922    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1923    LogFile "INFO: Free space left on image = $free_space KB"
1924    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1925    # make it bootable
1926    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1927    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1928    if [ "$KERN_DISK_MADE" ] ; then
1929        LogFile "INFO: Not running LILO. It's not that kind of disk."
1930    fi
1931
1932    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1933    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1934    echo -en "..."
1935    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1936    if [ "$retval" -eq "0" ] ; then
1937        echo -en "...$DONE\n"
1938        if [ "$KERN_DISK_MADE" ] ; then
1939            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1940        fi
1941    else
1942        echo -en "...failed\n"
1943        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1944        [ "$imagefile" != "" ] && rm -f $imagefile
1945    fi
1946    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1947    return $retval
1948}
1949
1950
1951PrepareBootDiskImage_ISOLINUX() {
1952    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1953    imagesdir=$MINDI_CACHE
1954    kernelpath=$1
1955    do_boot_root_thingy=""
1956    retval=0
1957
1958    old_pwd=`pwd`
1959    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1960    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1961    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1962    echo -en "..."
1963    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1964    mountpoint=$MINDI_TMP/mountpoint.$$
1965    mkdir -p $mountpoint
1966    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1967    LogFile "INFO: Creating vfat filesystem on $imagefile"
1968    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1969    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1970    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1971
1972    # Only move it now to its final destination and use it now
1973    mv $imagefile $imagesdir
1974    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1975
1976    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
1977
1978    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1979    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1980    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1981    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
1982    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1983    if [ "$?" -ne "0" ] ; then
1984        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1985        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1986        LogAll "       Please unload some of your modules and try again."
1987        rm -f $MINDI_TMP/mtpt.$$
1988        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
1989        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1990        retval=$(($retval+1))
1991    fi
1992
1993    mkdir -p $mountpoint/tmp
1994    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1995        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1996    fi
1997
1998    # copy the kernel across
1999    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2000    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2001    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2002         
2003    retval=0
2004    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2005    retval=$?
2006    if [ $KERNEL_IS_XEN = "yes" ]; then
2007        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2008        let retval+=$?
2009    fi
2010 
2011    if [ "$retval" -ne "0" ] ; then
2012        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2013        du -sk $mountpoint/* >> $LOGFILE
2014        LogFile "--- end of list of files ---"
2015        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2016        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2017        cd "$old_pwd"
2018        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2019        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2020
2021        LogIt "ERROR: Sorry, your kernel is too big for your image"
2022        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2023    fi
2024    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2025    LogFile "INFO: Free space left on image = $free_space KB"
2026    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2027
2028    # make it bootable
2029    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2030    mkdir -p $mountpoint/etc
2031    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2032    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2033    echo -en "..."
2034    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2035
2036    if [ "$retval" -eq "0" ] ; then
2037        echo -en "...$DONE\n"
2038        if [ "$KERN_DISK_MADE" ] ; then
2039            [ "$imagefile" != "" ] && rm -f $imagefile
2040            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2041        fi
2042    else
2043        echo -en "...failed\n"
2044        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2045        [ "$imagefile" != "" ] && rm -f $imagefile
2046    fi
2047    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2048    return $retval
2049}
2050
2051
2052ParseModprobeForIncludes() {
2053local MODPROBE_CONF mpincfile includes include
2054
2055MODPROBE_CONF=/etc/modprobe.conf
2056mpincfile=$1
2057touch $mpincfile
2058if [ -a $MODPROBE_CONF ]; then
2059    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2060    if [ -n "$includes" ]; then
2061        for include in $includes
2062        do
2063            if [ -a "$include" ]; then
2064                echo $include >> $mpincfile
2065            fi
2066        done
2067    fi
2068fi
2069}
2070
2071
2072PrepareDataDiskImages() {
2073    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2074
2075    imagesdir=$MINDI_CACHE
2076    rm -f $imagesdir/mindi.iso
2077    needlist=$MINDI_TMP/what-we-need.txt
2078    bigdir=$MINDI_TMP/bigdir
2079    mkdir -p $bigdir/usr/bin
2080    mkdir -p $bigdir/usr/sbin
2081    includefile=$MINDI_TMP/$$.includefile.txt
2082
2083    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2084    for d in bin sbin lib lib64; do
2085        if [ -h "/$d" ]; then
2086            thelink=`readlink /$d`
2087            mkdir -p $thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2088            mv $d/* $thelink 2> /dev/null
2089            if [ -d "$d" ]; then
2090                rmdir $d
2091            fi
2092            if [ ! -h $d ]; then
2093                ln -s $thelink $d || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2094            fi
2095        fi
2096    done
2097
2098    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2099    if [ -e "$DEPLIST_FILE" ]; then
2100        lfiles="$DEPLIST_FILE $lfiles"
2101    fi
2102    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2103    ParseModprobeForIncludes $includefile
2104    lines=$(($lines+`cat $includefile | wc -l`))
2105    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2106    res=$?
2107    rm -f $includefile
2108    if [ "$YOUR_KERNEL_SUCKS" ]; then
2109        pwd=`pwd`
2110        cd "$MINDI_TMP"
2111        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2112            tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2113        done
2114        for i in $EXTRA_MODS ; do
2115            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2116            [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2117            for k in $j ; do
2118                tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2119                LogFile "INFO: Added failsafe module $k to ramdisk"
2120            done
2121        done
2122        cd "$pwd"
2123    else
2124        ListKernelModulePaths >> $needlist
2125    fi
2126    if [ "$res" -ne "0" ] ; then
2127        Die "You have $res files present in dependency list\nbut absent from filesystem."
2128    fi
2129    FindAndAddUserKeyboardMappingFile
2130    mkdir -p $bigdir/tmp
2131    if [ _"$MONDO_SHARE" != _"" ]; then
2132        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2133        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2134    fi
2135    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2136    DropOptimizedLibraries $needlist $bigdir
2137    echo -en "Assembling dependency files"
2138
2139    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2140
2141    # also copy io.sys and msdos.sys, if we can find them
2142    for i in `mount | cut -d' ' -f3` ; do
2143        for j in io.sys msdos.sys ; do
2144            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2145        done
2146    done
2147
2148    # master boot record, too
2149    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2150    if [ "$i" ] ; then
2151        LogAll "INFO: Backing up $i's MBR"
2152        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2153        sleep 1
2154        sync
2155        j=$i
2156        [ -h "$j" ] && j=`readlink -f $j`
2157        LogAll "INFO: Creating /dev/boot_device ($j)"
2158        mkdir -p $bigdir/dev
2159        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2160    fi
2161
2162    old_pwd=`pwd`
2163    cd "$bigdir"
2164
2165    # Get terminfo content
2166    ti="usr/share/terminfo/l"
2167    if [ -d /$ti ]; then
2168        mkdir -p $ti
2169        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2170    fi
2171    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2172        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2173        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2174    fi
2175    if [ -d "/lib/dev-state" ]; then 
2176        tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2177    fi
2178    cd "$old_pwd"
2179    echo -e "$DONE"
2180    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2181    MakeMountlist $MINDI_TMP/mountlist.txt
2182    CheckMountlist $MINDI_TMP/mountlist.txt
2183    mkdir -p $bigdir/tmp
2184    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2185    if [ _"$MONDO_SHARE" != _"" ]; then
2186        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2187    fi
2188    if [ $LVM != "false" ]; then
2189        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2190        if [ "$?" -ne "0" ]; then
2191            LVM="false"
2192            rm -f $bigdir/tmp/i-want-my-lvm
2193        else
2194            LogFile "Your i-want-my-lvm file content is:"
2195            LogFile "-----------------------------------"
2196            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2197            LogFile "-----------------------------------"
2198        fi
2199    fi
2200    LogFile "Your mountlist.txt file content is:"
2201    LogFile "-----------------------------------"
2202    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2203    LogFile "-----------------------------------"
2204
2205    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2206    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2207    if [ _"$MONDO_SHARE" != _"" ]; then
2208        for q in filelist.full.gz biggielist.txt ; do
2209            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2210            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2211        done
2212    fi
2213
2214    echo -en "Tarring and zipping the data content..."
2215    size_of_all_tools=`du -sk $bigdir | cut -f1`
2216    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2217    LogFile "Size of the data content"
2218    LogFile "------------------------"
2219    du -sk $imagesdir/*gz >> $LOGFILE
2220    LogFile "------------------------"
2221    echo -e "$DONE"
2222
2223    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2224    rm -rf $bigdir
2225    rm -f $needlist
2226}
2227
2228
2229ProcessLDD() {
2230    local incoming f d nd bd bnd
2231    read incoming
2232    while [ "$incoming" != "" ]; do
2233        # We take the full path name of the dyn. lib. we want
2234        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2235        for f in $incoming ; do
2236            # echo modified file name if one of the parent dir is a link
2237            # by replacing the original dirname by the destination of the link
2238            d="`dirname $f`"
2239            found="false"
2240            while [ "$d" != "/" ]; do
2241                if [ -h "$d" ]; then
2242                    nd=`readlink -f $d`
2243                    bd=`basename $d`
2244                    bnd=`basename $nd`
2245                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2246                    echo $d
2247                fi
2248                d="`dirname $d`"
2249            done
2250
2251            echo "$f"
2252            echo "`ReadAllLink $f`"
2253        done
2254        read incoming
2255    done
2256}
2257
2258
2259Prompt() {
2260    echo -en "$1"
2261    read line
2262}
2263
2264
2265ReadLine() {
2266    local i incoming
2267    read incoming
2268    i=0
2269    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2270        i=$(($i+1))
2271        read incoming
2272    done
2273    echo "$incoming"
2274}
2275
2276
2277SizeOfPartition() {
2278    local devpath drive res stub
2279    device=$1
2280    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2281        Die "Cannot find $device's size - is your /etc/fstab sane?"
2282    fi
2283    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2284        res=`SizeOfRaidPartition $device`
2285        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2286        echo "$res"
2287        return 0
2288    fi
2289    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2290    res=`$FDISK -s $device 2>> $LOGFILE`
2291    # end patch
2292    # take only the first in case of multiple mount (cifs, nfs, ...)
2293    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2294    [ "$res" = "" ] && res="-1"
2295    echo $res
2296    return 0
2297}
2298
2299
2300SizeOfRaidPartition() {
2301    local real_dev smallest_size silly tmp
2302
2303    silly=999999999
2304    smallest_size=$silly
2305
2306    for real_dev in `GetRaidDevMembers $1` ; do
2307        tmp=`SizeOfPartition $real_dev`
2308        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2309    done
2310
2311    if [ "$smallest_size" = "$silly" ] ; then
2312        echo "-1"
2313        return 1
2314    else
2315        echo "$smallest_size"
2316        return 0
2317    fi
2318}
2319
2320
2321StripExecutable()
2322{
2323    local tmpfile
2324
2325    tmpfile=$MINDI_TMP/stripped.$$.dat
2326    [ -d "$1" ] || [ -h "$1" ] && return
2327    cp -f $1 $tmpfile 2>> $LOGFILE
2328    strip $tmpfile 2> /dev/null
2329    if [ "$?" -eq "0" ] ; then
2330        cp -f $tmpfile $1 2>> $LOGFILE
2331        LogFile "INFO: Stripped binary $2"
2332    fi
2333    rm -f $tmpfile
2334}
2335
2336KernelVer() {
2337        local fkern_ver fname
2338
2339        fname=$1
2340        file $fname | grep -q gzip
2341        if [ "$?" -eq "0" ] ; then
2342            # Used by ia64
2343            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2344        else
2345            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2346        fi
2347        echo "$fkern_ver"
2348}
2349
2350
2351# WARNING: This function should just echo the final result !!!
2352#
2353TryToFindKernelPath() {
2354    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2355
2356    we_want_version=$KERVERRUN
2357    possible_kernels=""
2358    duff_kernels=""
2359    output=""
2360   
2361    if [ "$ARCH" = "ia64" ] ; then
2362       root="/boot/efi/efi"
2363    else
2364       root="/"
2365    fi
2366    # See if we're booted from a Xen kernel
2367    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2368    if [ -f /proc/xen/capabilities ]; then
2369        # It's a Xen kernel
2370        KERNEL_IS_XEN="yes"
2371        LogFile "INFO: It's a Xen kernel..."
2372    fi
2373
2374    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2375        [ ! -e "$fname" ] && continue
2376        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2377        fkern_ver=`KernelVer $fname`
2378        [ "$fkern_ver" = "" ] && continue
2379        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2380        [ -f "$fname" ] || continue
2381        [ -h "$fname" ] && continue
2382        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2383        file $fname | grep -q gzip
2384        if [ "$?" -eq "0" ] ; then
2385            # Used by ia64
2386            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2387                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2388                duff_kernels="$fname $duff_kernels"
2389            else
2390                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2391                possible_kernels="$fname $possible_kernels"
2392            fi
2393        else
2394            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2395                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2396                duff_kernels="$fname $duff_kernels"
2397            else
2398                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2399                possible_kernels="$fname $possible_kernels"
2400            fi
2401        fi
2402    done
2403    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2404        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2405    fi
2406    if [ ! "$possible_kernels" ] ; then
2407        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2408        possible_kernels="$duff_kernels"
2409        if [ ! "$possible_kernels" ] ; then
2410            LogAll "INFO: Sorry, no duff kernels either"
2411        else
2412            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2413            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2414        fi
2415    fi
2416    if [ $KERNEL_IS_XEN = "yes" ]; then
2417        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2418        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2419        FindMboot32Binary
2420    fi
2421    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2422    noof_kernels=`CountItemsIn "$possible_kernels"`
2423    if [ "$noof_kernels" -eq "0" ] ; then
2424        LogAll "Could not find your kernel."
2425        if [ -e "/boot/vmlinuz" ] ; then
2426            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2427            output=/boot/vmlinuz
2428        else
2429            output=""
2430        fi
2431    elif [ "$noof_kernels" -eq "1" ] ; then
2432        kp=`echo "$possible_kernels" | sed s/' '//`
2433        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2434        output="$kp"
2435    else
2436        for i in $possible_kernels ; do
2437            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2438                LogAll "INFO: OK, I used my initiative and found that "
2439                LogAll "INFO: $i is probably your kernel. "
2440                output="$i"
2441                break
2442            fi
2443        done
2444        if [ ! -n "$output" ]; then
2445            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2446                output=/boot/vmlinuz
2447                LogFile "INFO: Schlomo, this one's for you."
2448            else
2449                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2450                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2451                LogFile "INFO: $possible_kernels"
2452                output=""
2453            fi
2454        fi
2455    fi
2456    if [ $KERNEL_IS_XEN = "yes" ]; then
2457        if [ "$noof_xenkernels" -eq "0" ]; then
2458            xenkernelpath=""
2459        elif [ "$noof_xenkernels" -eq "1" ]; then
2460            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2461            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2462        else
2463            for i in $possible_xenkernels ; do
2464                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2465                    LogFile "INFO: OK, I used my initiative and found that "
2466                    LogFile "INFO: $i is probably your Xen kernel. "
2467                    xenkernelpath="$i"
2468                    break
2469                fi
2470            done
2471            if [ ! -n "$xenkernelpath" ]; then
2472                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2473                if [ ! -n "$new_possible_xenkernels" ]; then
2474                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2475                    LogFile "INFO: Using $xenkernelpath"
2476                else
2477                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2478                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2479                    LogFile "INFO: $possible_xenkernels"
2480                    output=""
2481                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2482                    LogFile "INFO: Using $xenkernelpath"
2483                fi
2484            fi
2485        fi
2486        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2487            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2488        fi
2489    fi
2490    LogAll "TryToFindKernelPath found $output"
2491    echo "$output"
2492}
2493
2494
2495TurnTgzIntoRdz() {
2496    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2497
2498    tgz_dir_fname=$1
2499    rdz_fname=$2
2500    kernelsize=$3
2501    maxsize=$(($BOOT_SIZE-$kernelsize))
2502    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2503    tempfile=$MINDI_TMP/temp.rd
2504    mountpoint=$MINDI_TMP/mnt1
2505    res=0
2506    echo -en "..."
2507    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2508    echo -en "..."
2509    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2510    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2511    echo -en "..."
2512    mkdir -p $mountpoint
2513    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2514    echo -en "..."
2515    old_pwd=`pwd`
2516    cd "$mountpoint"
2517
2518   
2519    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2520    for f in $tgz_dir_fname/*; do 
2521        if [ ! -r $f ]; then
2522            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2523        else
2524            cp -Rdf $f . 2>&1 >> $LOGFILE
2525        fi
2526    done
2527    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2528
2529    cd dev || Die "Can't cd to dev"
2530    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2531    rm -f dev-entries.tgz
2532    cd ..
2533
2534    for w in insmod.static insmod.static.old ; do
2535        s=`which $w 2> /dev/null`
2536        if [ -e "$s" ] ; then
2537            tar cf - -C / $s 2> /dev/null | tar xf -
2538        fi
2539    done
2540
2541    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2542   
2543    # Copy of files mandatory for ssh to automate mount if sshfs is used
2544    mkdir $mountpoint/.ssh
2545    cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2546    echo > $mountpoint/tmp/myssh << EOF
2547ssh -o StrictHostKeyChecking=no $*
2548EOF
2549    chmod 755 $mountpoint/tmp/myssh
2550
2551    # Copy of files mandatory for ld.so
2552    cp -rp /etc/ld.so.c* $mountpoint/etc
2553
2554    # Handle the case where busybox and mount are dynamically linked
2555    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2556    if [ $? -eq 0 ]; then
2557        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2558        rm -f bin/mount
2559    fi
2560
2561    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2562    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2563    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2564        if [ -r $f ]; then
2565            echo $f >> $MINDI_TMP/minimal.lis
2566            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2567        fi
2568    done
2569    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2570        ReadAllLink $f >> $MINDI_TMP/minimal.lis
2571    done
2572    # Initial / are trucated by tar
2573    finallist=""
2574    # Remove directories from the list, as tar will create them anyway
2575    # and it may hurt if /lib is in it as on Debian/Ubuntu
2576    # recent bash says that -d is true for a link to a dir !
2577    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2578        if [ -e $f -a ! -d $f ] || [ -h $f ]; then
2579            finallist="$finallist $f"
2580        fi
2581    done
2582    tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2583
2584    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2585    ln -sf /bin/bash bin/sh
2586    LogIt "INFO: Using bash as default shell"
2587    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2588
2589    # Avoids an issue on some distro (RHEL5)
2590    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2591
2592    mkdir -p $mountpoint/tmp
2593    # Management of udev (which includes modprobe in rules)
2594    ps auxww | grep -v grep | grep -qw udevd
2595    if [ $? -eq 0 ]; then
2596        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2597        LogIt "INFO: udev device manager found"
2598        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2599        # This avoids NIC remapping if on another machine at restore time on Debian at least
2600        rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2601        # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2602        rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2603        # Do not do it if it's a link (Ubuntu 64 bits #503)
2604        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2605            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2606        fi
2607        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2608            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2609        fi
2610        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2611            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2612        fi
2613        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2614            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2615            lis=""
2616            # Get only the files which exist in that list
2617            # and potentially their symlink structure
2618            for i in $lis2; do
2619                if [ -h $i ]; then
2620                    j=$i
2621                    while [ -h $j ]; do
2622                        lis="$lis $j"
2623                        j=`readlink $j`
2624                    done
2625                    lis="$lis $j"
2626                elif [ -f $i ]; then
2627                    lis="$lis $i"
2628                fi
2629            done
2630            # And their deps
2631            LocateDeps $lis > $MINDI_TMP/udev.lis
2632            for i in $lis; do
2633                if [ "`echo $i | cut -c1`" = "/" ]; then
2634                    j=`echo $i | cut -c2-`
2635                    [ "$j" != "" ] && rm -f $j
2636                fi
2637            done
2638            tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2639            rm -f $MINDI_TMP/udev.lis
2640        else
2641            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2642            LogAll "         mindi will use static devices which may cause problems"
2643            rm -f $mountpoint/tmp/USE-UDEV
2644        fi
2645    fi
2646
2647    # Management of potential HW info (ProLiant only at the moment)
2648    rm -rf $MINDI_CACHE/bkphw
2649    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2650    if [ -d $MINDI_CACHE/bkphw ]; then
2651        LogIt "INFO: Hardware Information found and saved ..."
2652        cp -rp $MINDI_CACHE/bkphw .
2653        if [ -f $MINDI_CACHE/tools.files ]; then
2654            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2655            LocateDeps $lis > $MINDI_TMP/tools.lis
2656            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2657        fi
2658        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2659            mv -f $MINDI_CACHE/mindi-rsthw .
2660            chmod 755 ./mindi-rsthw
2661        fi
2662        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2663    fi
2664
2665    # Management of perl scripts delivered needed at restore time
2666    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2667    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2668
2669    for w in cdrom groovy-stuff ; do
2670        mkdir -p mnt/$w
2671    done
2672
2673    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2674
2675    cd "$old_pwd"
2676    echo -en "..."
2677    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2678        cd "$MINDI_TMP"
2679        needed_modules_path=lib/modules/$FAILSAFE_KVER
2680    else
2681        cd /
2682        if [ "${kernelname}" != "" ]
2683        then
2684            needed_modules_path=lib/modules/${kernelname}
2685        else
2686            needed_modules_path=lib/modules/$KERVERRUN
2687        fi
2688    fi
2689
2690    needed_modules=""
2691    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2692
2693    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2694        # For PXE boot
2695        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2696    fi
2697    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2698        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2699    fi
2700    for i in $DENY_MODS; do
2701        LogFile "INFO: Removing $i from the list of modules to load"
2702        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2703    done
2704
2705    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2706    for i in $list_of_groovy_mods ; do
2707        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2708    done
2709
2710    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2711        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2712        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2713        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2714        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2715        # Uncompress modules if not using udev and native modprobe
2716        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2717            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2718                LogFile "INFO: Uncompressing $i"
2719                gunzip -f $mountpoint/$i
2720            fi
2721        fi
2722        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2723            echo "Replacing module symlink ($i) with actual file"
2724            rm -f $mountpoint/$i
2725            cp -Lf $i $mountpoint/$i
2726            ls -l $mountpoint/$i
2727        fi
2728    done
2729
2730    # Also copy modules.* in case of udev so that normal modprobe works
2731    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2732
2733    # Copy FW in case some drivers needs it
2734    for d in "/lib" "/usr/lib"; do
2735        if [ -d "$d/firmware" ]; then
2736            cp -a "$d/firmware" "$mountpoint/$d"
2737        fi
2738    done
2739
2740    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2741    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2742        if [ -d "$d/multipath" ]; then
2743            cp -a "$d/multipath" "$mountpoint/$d"
2744        fi
2745    done
2746
2747    # Copy an additional ProLiant tool for OBDR support
2748    if [ -f $MINDI_TMP/OBDR ]; then
2749        found=0
2750        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2751            mkdir -p $mountpoint/usr/bin
2752            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2753            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2754            found=1
2755        fi
2756        if [ -x /usr/bin/sg_wr_mode ]; then
2757            mkdir -p $mountpoint/usr/bin
2758            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2759            LocateDeps $lis > $MINDI_TMP/obdr.lis
2760            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2761            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2762            found=1
2763        fi
2764        if [ $found -eq 0 ]; then
2765            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2766            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2767        fi
2768    fi
2769
2770    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2771        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2772        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2773        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile "      ...because kernel is failsafe"
2774        rm -f $mountpoint/sbin/devfsd
2775    fi
2776    cd "$old_pwd"
2777    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2778    if [ _"$MONDO_SHARE" != _"" ]; then
2779        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2780        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2781        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2782        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2783        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2784        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2785        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2786        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2787        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2788    fi
2789    mkdir -p $mountpoint/proc
2790    LogFile "---------------------------"
2791    LogFile "Content of initial ramdisk:"
2792    LogFile "---------------------------"
2793    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2794    LogFile "---------------------------"
2795
2796    # Determine what filesystem to use for initrd image
2797    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2798    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2799    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2800    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2801        # say what will be used
2802        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2803        # kernel expects linuxrc in ext2 filesystem
2804        ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2805        # unmount loop filesystem and create image file using the standard approach
2806        umount $mountpoint || Die "Cannot unmount $tempfile"
2807        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2808        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2809            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2810        else
2811            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2812        fi
2813        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2814        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2815        rm -f ${rdz_fname}.tmp
2816        # log that we are done
2817        LogFile "      ...done."
2818    elif [ "$gvFileSystem" = "initramfs" ]; then
2819        # say what will be used
2820        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2821        # make sure that cpio is there
2822        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2823        # go into filesystem
2824        cd "$mountpoint"
2825        # kernel expects init in cpio filesystem
2826        ln -sf sbin/init init
2827        # create cpio image file and unmount loop filesystem
2828        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2829        cd "$old_pwd"
2830        umount $mountpoint || Die "Cannot unmount $tempfile"
2831        # log that we are done
2832        LogFile "      ...done."
2833    else
2834        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2835    fi
2836
2837    if [ "$res" -eq "0" ] ; then
2838        echo -en "..."
2839    else
2840        echo -en "\rMade an rdz WITH ERRORS.           \n"
2841    fi
2842    return 0
2843}
2844
2845
2846##############################################################################
2847#----------------------------------- Main -----------------------------------#
2848##############################################################################
2849
2850# Now we can create what we need
2851mkdir -p $MINDI_TMP
2852
2853# Purge from potential old run
2854if [ _"$MINDI_CACHE" = _"" ]; then
2855    Die "MINDI_CACHE undefined"
2856fi
2857
2858# --nolog needs to be first, and is used in analyze-my-lvm
2859if [ "$1" = "--nolog" ] ; then
2860    shift
2861    LOGFILE=/dev/stderr
2862else
2863    > $LOGFILE
2864fi
2865if [ "$1" = "--printvar" ] ; then
2866    shift
2867    if [ _"$1" != _"" ] ; then
2868        set | grep -Ew "^$1" | cut -d= -f2
2869    fi
2870    exit 0
2871fi
2872
2873LogFile "mindi v$MINDI_VERSION"
2874LogFile "$ARCH architecture detected"
2875LogFile "mindi called with the following arguments:"
2876echo "$@">> $LOGFILE
2877LogFile "Start date : `date`"
2878LogFile "-----------------------------"
2879
2880[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2881
2882# Log some capital variables
2883[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2884[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2885LogFile "MONDO_SHARE = $MONDO_SHARE"
2886LogFile "MINDI_LIB = $MINDI_LIB"
2887LogFile "MINDI_SBIN = $MINDI_SBIN"
2888LogFile "MINDI_CONF = $MINDI_CONF"
2889if [ -f $MINDI_CONFIG ]; then
2890    LogFile "-----------------------------"
2891    LogFile " Mindi configuration file    "
2892    LogFile "-----------------------------"
2893    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2894    LogFile "-----------------------------"
2895fi
2896LogFile "In Mindi"
2897LogFile "--------"
2898LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2899LogFile "BOOT_SIZE = $BOOT_SIZE"
2900LogFile "--------"
2901
2902trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2903
2904# Sanity checks
2905which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2906which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2907which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2908which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2909if which awk &> /dev/null ; then
2910    if ! which gawk &> /dev/null ; then
2911        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2912    fi
2913fi
2914which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2915[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2916
2917[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2918
2919# Update the PATH variable if incomplete
2920if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2921    PATH=$PATH:/sbin:/usr/sbin
2922    export PATH
2923    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2924    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2925    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2926fi
2927
2928# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2929if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2930    source $MINDI_LIB/FindDistroFailsafe
2931    # Log kernel image
2932    LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2933else
2934    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2935fi
2936
2937if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2938    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2939fi
2940
2941### TODO
2942### Fix as it's not mandatory on ia64
2943if [ "$ARCH" = "ia64" ] ; then
2944    if which elilo &> /dev/null ; then
2945        LILO_EXE=elilo
2946    else
2947        LILO_EXE=`which false 2> /dev/null`
2948    fi
2949else
2950    FindIsolinuxBinary
2951fi
2952trap "Aborted" SIGTERM
2953DONE="\r\t\t\t\t\t\t\t\tDone.         "
2954kernelpath=""
2955MONDO_ROOT=/var/cache/mondo
2956mkdir -p $MONDO_ROOT
2957
2958if [ -d "/proc/lvm" ]; then
2959    # LVM v1
2960    LVMCMD=""
2961    LVM="v1"
2962elif [ -d "/dev/mapper" ]; then
2963    # LVM v2
2964    LVMCMD="lvm"
2965    LVM="v2"
2966else
2967    LVM="false"
2968fi
2969
2970if [ -e "/proc/cmdline" ]; then
2971    CMDLINE="/proc/cmdline"
2972elif [ -e "/tmp/cmdline" ]; then
2973    CMDLINE="/tmp/cmdline"
2974else
2975    CMDLINE="/dev/null"
2976fi
2977
2978LogFile "INFO: LVM set to $LVM"
2979LogFile "----------"
2980LogFile "mount result:"
2981LogFile "-------------"
2982mount >> $LOGFILE
2983if [ -e /etc/raidtab ]; then
2984    LogFile "-------------"
2985    LogFile "/etc/raidtab content:"
2986    LogFile "-------------"
2987    cat /etc/raidtab >> $LOGFILE
2988else
2989    LogFile "No file /etc/raidtab"
2990fi
2991if [ -e /etc/mdadm.conf ]; then
2992    LogFile "-------------"
2993    LogFile "/etc/mdadm.conf content:"
2994    LogFile "-------------"
2995    cat /etc/mdadm.conf >> $LOGFILE
2996else
2997    LogFile "-------------"
2998    LogFile "No file /etc/mdadm.conf"
2999fi
3000LogFile "-------------"
3001LogFile "cat $CMDLINE"
3002LogFile "-------------"
3003cat $CMDLINE >> $LOGFILE
3004LogFile "-------------"
3005LogFile "cat /proc/swaps:"
3006LogFile "-------------"
3007cat /proc/swaps >> $LOGFILE
3008LogFile "-------------"
3009if [ -e /proc/mdstat ]; then
3010    LogFile "cat /proc/mdstat:"
3011    LogFile "-------------"
3012    cat /proc/mdstat >> $LOGFILE
3013else
3014    LogFile "No pseudo file /proc/mdstat"
3015fi
3016LogFile "-------------"
3017LogFile "cat /proc/partitions:"
3018LogFile "-------------"
3019cat /proc/partitions >> $LOGFILE
3020LogFile "-------------"
3021LogFile "cat /proc/filesystems:"
3022LogFile "-------------"
3023cat /proc/filesystems >> $LOGFILE
3024LogFile "-------------"
3025LogFile "lsmod result:"
3026LogFile "-------------"
3027lsmod >> $LOGFILE
3028MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3029if [ -x /usr/sbin/esxcfg-module ]; then
3030    LogFile "-------------"
3031    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3032    LogFile "-------------"
3033    LogFile "VMWare modules"
3034    LogFile "-------------"
3035    /usr/sbin/esxcfg-module -l >> $LOGFILE
3036    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3037fi
3038LogFile "Liste of extra modules is:" 
3039LogFile "-------------" 
3040LogFile "$EXTRA_MODS" 
3041LogFile "-------------" 
3042LogFile "FORCE_MODS:"
3043LogFile "-------------"
3044LogFile "$FORCE_MODS"
3045LogFile "-------------"
3046LogFile "DENY_MODS:"
3047LogFile "-------------"
3048LogFile "$DENY_MODS"
3049LogFile "-------------"
3050LogFile "df result:"
3051LogFile "----------"
3052df -aT >> $LOGFILE
3053LogFile "-------------"
3054LogFile "df -i result:"
3055LogFile "----------"
3056df -i >> $LOGFILE
3057LogFile "-------------"
3058if [ -r /boot/grub/menu.lst ]; then
3059    LogFile "-------------"
3060    LogFile "INFO: /boot/grub/menu.lst content"
3061    LogFile "-------------"
3062    cat /boot/grub/menu.lst >> $LOGFILE
3063    LogFile "-------------"
3064fi
3065if [ -r /boot/grub/grub.conf ]; then
3066    LogFile "-------------"
3067    LogFile "INFO: /boot/grub/grub.conf content"
3068    LogFile "-------------"
3069    cat /boot/grub/grub.conf >> $LOGFILE
3070    LogFile "-------------"
3071fi
3072if [ -r /boot/grub/grub.cfg ]; then
3073    LogFile "-------------"
3074    LogFile "INFO: /boot/grub/grub.cfg content"
3075    LogFile "-------------"
3076    cat /boot/grub/grub.cfg >> $LOGFILE
3077    LogFile "-------------"
3078fi
3079if [ -r /boot/grub/device.map ]; then
3080    LogFile "-------------"
3081    LogFile "INFO: /boot/grub/device.map content"
3082    LogFile "-------------"
3083    cat /boot/grub/device.map >> $LOGFILE
3084    LogFile "-------------"
3085fi
3086if [ -r /etc/lilo.conf ]; then
3087    LogFile "-------------"
3088    LogFile "INFO: /etc/lilo.conf content"
3089    LogFile "-------------"
3090    cat /etc/lilo.conf >> $LOGFILE
3091fi
3092LogFile "Full fdisk info"
3093LogFile "---------------"
3094$FDISK -l >> $LOGFILE
3095LogFile "----------------"
3096LogFile "List of extra modules is:"
3097LogFile "$EXTRA_MODS"
3098LogFile "-------------"
3099
3100# Compute libata version
3101laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3102# If libata v2 is used then remove ide-generic as it will perturbate boot
3103if [ "`echo $MODULES | grep libata`" ]; then
3104    if [ "$laver" = "2" ]; then
3105        DENY_MODS="$DENY_MODS ide-generic"
3106        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3107        LogFile "-------------"
3108    fi
3109fi
3110
3111# Check for McAfee which disturbs the access to some files (tgz in articular)
3112if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3113    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3114    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3115    LogFile "WARNING: You have two options:"
3116    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3117    LogFile "WARNING:  - Disable the scanner during the backup"
3118fi
3119
3120# Check for ISO_CMD command
3121if [ ! -x $ISO_CMD ]; then
3122    LogFile "NOTE: No CD image (ISO file) utility found"
3123fi
3124
3125FLOPPY_WAS_MOUNTED=""
3126for mtpt in /media/floppy /mnt/floppy /floppy ; do
3127    if mount | grep -w $mtpt &> /dev/null ; then
3128        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3129        umount $mtpt
3130    fi
3131done
3132
3133#
3134# If we have a USB device we need to store info
3135# and remove it from the parameters line
3136#
3137if [ "$#" -ne "0" ] ; then
3138    if [ "$1" = "--usb" ] ; then
3139        shift
3140        USBDEVICE=$1
3141        if [ _"$USBDEVICE" = _"" ]; then
3142            Die "No USB device specified"
3143        fi
3144        shift
3145    fi
3146fi
3147
3148if [ "$#" -ne "0" ] ; then
3149    if [ "$1" = "--findkernel" ] ; then
3150        resk=`TryToFindKernelPath`
3151        # Avoids logfile content for mondo
3152        export MONDO_SHARE=""
3153        if [ "$resk" = "" ] ; then
3154            if [ $KERNEL_IS_XEN = "yes" ]; then
3155                echo "$xenkernelpath"
3156                LogFile "INFO: xenkernelpath = $xenkernelpath"
3157                MindiExit 0
3158            else
3159                MindiExit -1
3160            fi
3161        else
3162            echo "$resk"
3163            LogFile "INFO: kernelpath = $resk"
3164            MindiExit 0
3165        fi
3166    elif [ "$1" = "--locatedeps" ] ; then
3167        [ ! "$2" ] && Die "Please specify the binary to look at"
3168        LocateDeps $*
3169        # Avoids logfile content for mondo
3170        export MONDO_SHARE=""
3171        MindiExit $?
3172    elif [ "$1" = "--readalllink" ] ; then
3173        [ ! "$2" ] && Die "Please specify the binary to look at"
3174        # Avoids logfile content for mondo
3175        export MONDO_SHARE=""
3176        ReadAllLink $2
3177        MindiExit $?
3178    elif [ "$1" = "--makemessage" ] ; then
3179        MakeMessageFile | cut -c1-80
3180        MindiExit 0
3181    elif [ "$1" = "--makemountlist" ] ; then
3182        [ ! "$2" ] && Die "Please specify the output file"
3183        MakeMountlist $2
3184        CheckMountlist $2
3185        # Avoids logfile content for mondo
3186        export MONDO_SHARE=""
3187        MindiExit $?
3188    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3189        echo "Mindi v$MINDI_VERSION"
3190        # Avoids logfile content for mondo
3191        export MONDO_SHARE=""
3192        MindiExit 0
3193    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3194        MONDO_TMP=$2
3195        # Change MINDI_TMP for the one provided by mondo
3196        # So that it can get back the built files
3197        if [ _"$MONDO_TMP" = _"" ]; then
3198            Die "MONDO_TMP is empty, aborting"
3199        fi
3200        if [ _"$MONDO_TMP" = _"/" ]; then
3201            Die "MONDO_TMP is /, aborting"
3202        fi
3203        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3204        rmdir $MINDI_TMP
3205        export MINDI_TMP=$MONDO_TMP
3206        mkdir -p $MINDI_TMP
3207
3208        # This is the scratch dir in mondo - subdir images
3209        MINDI_CACHE=$3
3210
3211        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3212        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3213       
3214###
3215### Sq-Modification...
3216### Attempt to locate kernel specific module path
3217### if module path is found then use it other wise use uname -r to set it...
3218###
3219        if [ $KERNEL_IS_XEN = "yes" ]; then
3220            LogAll "INFO: xenkernelpath = $xenkernelpath"
3221        fi
3222        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3223        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3224        then
3225           LogAll "WARNING: Module path for ${kernelpath} not found..."
3226           LogAll "         using running kernel\'s modules."
3227           kernelname=$KERVERRUN
3228        else
3229           LogAll "Using modules for kernel: ${kernelname}"
3230        fi
3231        LogAll "INFO: kernelname = $kernelname"
3232        LogAll "INFO: kernelpath = $kernelpath"
3233###
3234### end of Sq-Modification
3235###
3236        TAPEDEV=$5
3237        TAPESIZE=$6
3238        FILES_IN_FILELIST=$7
3239        USE_LZO=$8
3240        CDRECOVERY=$9
3241        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3242            IMAGE_DEVS=""
3243        else
3244            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3245        fi
3246        if [ "${11}" ] ; then
3247            LILO_OPTIONS=""
3248    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3249        fi
3250        LAST_FILELIST_NUMBER=${12}
3251        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3252        export MINDI_EXCLUDE_DEVS="${14}"
3253        USE_COMP="${15}"
3254        USE_LILO="${16}"
3255        USE_STAR="${17}"
3256        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3257        DIFFERENTIAL="${19}"
3258        USE_GZIP="${20}"
3259        NOT_BOOT="${21}"
3260        [ "$USE_COMP" = "" ] && USE_COMP=yes
3261        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3262        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3263        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3264        # MONDO_ROOT is the real scratchdir
3265        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3266        if [ _"$MONDO_ROOT" != _"" ]; then
3267            mkdir -p $MONDO_ROOT
3268        else
3269            Die "MONDO_ROOT is undefined"
3270        fi
3271    else
3272        LogScreen "Syntax: mindi (--custom ....)"
3273        MindiExit -1
3274    fi
3275fi
3276
3277if [ _"$MINDI_CACHE" != _"" ]; then
3278    rm -rf $MINDI_CACHE/* 2> /dev/null
3279    mkdir -p $MINDI_CACHE
3280fi
3281
3282[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3283
3284if [ _"$MONDO_SHARE" = _"" ]; then
3285    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3286    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3287    LogIt "BusyBox sources are available from http://www.busybox.net"
3288    LogIt "------------------------------------------------------------------------------"
3289else
3290    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3291fi
3292if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3293    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3294else
3295    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3296    MindiExit -1
3297fi
3298
3299for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3300    modinfo $i 2> /dev/null 1> /dev/null
3301    if [ $? -eq 0 ]; then
3302        modprobe $i 2>&1 > /dev/null
3303    fi
3304done
3305
3306KERN_DISK_MADE=""
3307
3308LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3309LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3310LogFile "NOT_BOOT = '$NOT_BOOT'"
3311if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3312    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3313    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3314    MakeMountlist $MINDI_TMP/mountlist.txt
3315    CheckMountlist $MINDI_TMP/mountlist.txt
3316    mkdir -p $MINDI_TMP/small-all/tmp
3317    cd "$MINDI_TMP/small-all"
3318    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3319    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3320    sleep 2
3321    LogIt "Done. Exiting."
3322    MindiExit 0
3323fi
3324
3325if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3326    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3327fi
3328
3329if [ "$kernelpath" = "" ] ; then
3330    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3331    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3332    read ch
3333    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3334        USE_OWN_KERNEL="yes"
3335    else
3336        USE_OWN_KERNEL="no"
3337    fi
3338    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3339        YOUR_KERNEL_SUCKS=""
3340        kernelpath=`TryToFindKernelPath`
3341        if [ "$kernelpath" = "" ] ; then
3342            echo -n "Please enter kernel path : "
3343            read kernelpath
3344        fi
3345    else
3346        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3347    fi
3348fi
3349if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3350    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3351    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3352        source $MINDI_LIB/FindDistroFailsafe
3353        # Log kernel image
3354        LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3355        kernelpath="$FAILSAFE_KBIN"
3356        LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3357        LogIt "      The failsafe kernel is $kernelpath."
3358        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3359        LogIt "      disks then it may still be a result of a problem with your kernel."
3360        pwd=`pwd`
3361        cd "$MINDI_TMP"
3362        mkdir -p lib/modules
3363        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3364        cd "$pwd"
3365    else
3366        kernelpath=$MINDI_LIB/vmlinuz
3367        LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3368        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3369        LogIt "      disks then it may still be a result of a problem with your kernel."
3370        pwd=`pwd`
3371        cd "$MINDI_TMP"
3372        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3373        cd "$pwd"
3374    fi
3375    YOUR_KERNEL_SUCKS="Your kernel sucks"
3376fi
3377echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3378[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3379
3380[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3381
3382PrepareDataDiskImages
3383
3384ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3385rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3386export ramdisk_size=$rds
3387
3388LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3389if [ "$ARCH" = "ia64" ] ; then
3390    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3391else
3392    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3393fi
3394
3395[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3396...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3397
3398if [ _"$MONDO_SHARE" = _"" ]; then
3399    ListImagesForUser
3400    OfferToMakeBootableISO
3401    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3402        OfferToMakeBootableUSB
3403    fi
3404    LogAll "Finished."
3405elif [ "$TAPEDEV" ] ; then
3406    if [ "$ARCH" != "ia64" ] ; then
3407        # We need to keep the img file as boot file for ia64 platform
3408        rm -f $MINDI_CACHE/{*img,*iso}
3409    else
3410        rm -f $MINDI_CACHE/*iso
3411    fi
3412    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3413        OfferToMakeBootableUSB
3414    fi
3415    OfferToMakeBootableISO
3416    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3417        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3418    else
3419        Die "Cannot find all.tar.gz, to be written to tape"
3420    fi
3421elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3422    OfferToMakeBootableUSB
3423else
3424    OfferToMakeBootableISO
3425fi
3426# cleanup
3427LogAll "INFO: $FRIENDLY_OUTSTRING"
3428for mtpt in $FLOPPY_WAS_MOUNTED ; do
3429    mount $mtpt
3430done
3431MindiExit 0
Note: See TracBrowser for help on using the repository browser.