Context Navigation

source: MondoRescue/branches/3.0/mindi/mindi@ 3722

Visit:

Last change on this file since 3722 was 3360, checked in by Bruno Cornec, 9 years ago

Backports from 3.2 (rev 3336-3359):

Improve kernel 3.14+ detection for initramfs
Fix installation of parted2fdisk under rootfs by removing useless -s option of install
Remove usage of internal function basename in parted2fdisk use File::Basename instead

Property svn:executable set to *
Property svn:keywords set to Rev Id

File size: 128.0 KB

Line
1	#!/bin/bash
2
3	# $Id: mindi 3360 2015-03-07 13:41:11Z bruno $
4	#
5	#-----------------------------------------------------------------------------
6	# mindi - mini-Linux distro based on the user's filesystem & distribution
7	#
8	# Mindi can create a multi-image boot/root kit. The first image is the boot
9	# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10	# the third disk is data disk #2; and so it goes.
11	#
12	# See http://www.mondorescue.org for details.
13	#-----------------------------------------------------------------------------
14
15	### Which arch are we on (useful for ia64 port)
16	ARCH=`/bin/uname -m`
17	KERVERRUN=`/bin/uname -r`
18	# By default we use the running kernel as a reference
19	KERVER=$KERVERRUN
20
21	# In case of problem with udev you can try to add udevdebug
22	MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23	MINDI_DEFAULT_BOOT_OPTION="interactive"
24	# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25	# So this parameter only applies to non CD recovery.
26	MINDI_BOOT_TIMEOUT="300"
27
28	MINDI_REV=PBREV
29	MINDI_VER=PBVER
30
31	MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32	MINDI_PREFIX=XXX
33	MINDI_CONF=YYY
34	MINDI_SBIN=${MINDI_PREFIX}/sbin
35	MINDI_LIB=LLL
36	MINDI_CACHE=/var/cache/mindi
37
38	# Temporary directory for mindi
39	TMPDIR=/tmp
40
41	EXTRA_SPACE=120000 # increase if you run out of ramdisk space
42	BOOT_SIZE=65600 # size of the boot disk
43
44	PROMPT_MAKE_CD_IMAGE="yes"
45	# Ask if you want to make a CD Image to be written?
46	# if this is set to 'no', then the image will be created automatically
47
48	PROMPT_MAKE_USB_IMAGE="yes"
49	# Ask if you want to make a USB Image to be written?
50	# if this is set to 'no', then the image will be created automatically
51
52	USE_OWN_KERNEL="yes"
53	# If set to "no", you will be prompted for whether or not
54	# you want to use your own kernel, or the supplied default.
55	# If "yes" mindi will automatically use your own kernel.
56
57	KERNEL_IS_XEN="no"
58	# If set to "no", the kernel is not a Xen kernel
59	# If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60	xenkernelpath=""
61
62	MY_FSTAB=/etc/fstab
63	TAPE_MODS="ht st osst ide-tape ide_tape"
64	SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66	# ide-probe-mod
67	IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon hv_storvsc"
68	PCMCIA_MODS="pcmcia_core ds yenta_socket"
69	USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci-hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70	NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp_pch"
71	CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72	# Those modules will only go on the backup media, not the boot media.
73	EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74	# Replace with that line for HP OCMP e.g.
75	#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76	DENY_MODS="kqemu vxfen"
77	# Force some modules to be included
78	FORCE_MODS=""
79
80	# Find MBR in case of bootable USB device to build
81	MBRFILE=/usr/lib/syslinux/mbr.bin
82	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85	[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87	LOGFILE=/var/log/mindi.log
88	BOOT_MEDIA_MESSAGE="\
89	To format and restore all files automatically, type '0enuke07' <enter>.\n\
90	To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91	To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92	To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93	\n\
94	You may add one or more parameters as well as per the function keys below\n\
95	e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96	\n\
97	If restoring from a local external disk or USB key, do not connect it \n\
98	until the boot-up has finished.\n\
99	\n\
100	\n0eF107-Main \| Boot Parameters 0eF207-1/2 \| 0eF307-2/2 \| 0eF407-PXE\n\
101	"
102	FDISK=$MINDI_SBIN/parted2fdisk
103
104	# Using a config file allow to overwrite some values
105	MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106	if [ -f $MINDI_CONFIG ]; then
107	. $MINDI_CONFIG
108	fi
109	DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110	DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112	ISO_CMD="/usr/bin/mkisofs"
113	ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115	# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116	# However, they use exactly the same command line parameters, so just
117	# use genisoimage if it's available.
118	if [ ! -x $ISO_CMD ]; then
119	ISO_CMD=/usr/bin/genisoimage
120	fi
121
122
123	# Function to log on screen only
124	LogScreen() {
125	if [ -e /dev/stderr ] ; then
126	echo -e "$1" >> /dev/stderr
127	elif [ -e /usr/bin/logger ] ; then
128	/usr/bin/logger -s $1
129	fi
130	}
131
132	# Function to log in log file only
133	LogFile() {
134
135	echo -e "$1" >> $LOGFILE
136	if [ _"$2" != _"" ]; then
137	grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138	fi
139	rm -f "$2"
140	}
141
142	# Function to log in both screen and logfile
143	LogAll() {
144	LogScreen "$1"
145	LogFile "$1" "$2"
146	}
147
148	# Preserved for compatibility
149	LogIt() {
150	LogAll "$1" "$2"
151	}
152
153	# Last function called before exiting
154	# Parameter is exit code value
155	# Should be declared here as used immediately below potentialy
156	MindiExit() {
157	LogFile "Mindi $MINDI_VERSION is exiting"
158	LogFile "End date : `date`"
159	if [ _"$MONDO_SHARE" != _"" ] ; then
160	echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161	if [ -f $LOGFILE ]; then
162	cat $LOGFILE >> /var/log/mondoarchive.log
163	else
164	echo "No LOGFILE available in that mindi run" >> /var/log/mondoarchive.log
165	fi
166	echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167	fi
168
169	cd /
170	sync&
171
172	# Clean temporary files only when standalone mindi
173	if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174	rm -Rf $MINDI_TMP
175	fi
176	exit $1
177	}
178
179	Die() {
180	local i
181	if [ "$1" = "" ] ; then
182	LogAll "FATAL ERROR"
183	else
184	LogAll "FATAL ERROR. $1"
185	fi
186	if [ _"$2" != _"" ]; then
187	grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188	fi
189	rm -f "$2"
190
191	LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192	LogAll "See http://www.mondorescue.org for more information."
193	LogAll "WE CANNOT HELP unless you enclose that file.\n"
194	MindiExit -1
195	}
196
197	# Now we can create what we need
198	MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199	if [ $? -ne 0 ]; then
200	df $TMPDIR
201	Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202	fi
203	if [ _"$MINDI_TMP" = _"" ]; then
204	Die "MINDI_TMP is empty, aborting"
205	fi
206	if [ _"$MINDI_TMP" = _"/" ]; then
207	Die "MINDI_TMP is /, aborting"
208	fi
209	export MINDI_TMP
210
211	# ----------------------------------------------------------------------------
212
213
214	AbortHere() {
215	[ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216	Die "Program is terminating in response to signal received from OS/user"
217	}
218
219
220	Aborted() {
221	trap SIGHUP SIGTERM SIGTRAP SIGINT
222	[ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindiimg $MINDI_CACHE/gz $MINDI_CACHE/mindi.iso
223	[ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224	Die "User abort."
225	}
226
227
228	AddFileToCfgIfExists() {
229	[ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230	}
231
232
233	AddKeyboardMappingFile() {
234	local mappath r included_list included_item i res ii sss
235	mappath=$1
236	KBDEPTH=$(($KBDEPTH+1))
237	[ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238	if [ -e "$bigdir/$mappath" ] ; then
239	LogFile "INFO: $mappath already added"
240	return
241	elif [ -d "$bigdir/$mappath" ] ; then
242	echo "Cannot add $mappath: it's a directory. Sorry."
243	return
244	fi
245	LogFile "INFO: Added kbd map $mappath"
246	if [ ! -e "$mappath" ] ; then
247	mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
248	if [ ! -e "$mappath" ] ; then
249	LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250	return
251	fi
252	else
253	echo -en "`basename $mappath \| tr '.' '#' \| sed s/#kmap#gz// \| sed s/#inc#gz//` " \| tr '#' '.'
254	fi
255
256	tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257	if [ "`echo $mappath \| grep -F ".gz"`" ] ; then
258	included_list=`gzip -dc $mappath \| grep -Fi include \| sed s/'"'//g \| cut -d' ' -f2`
259	else
260	included_list=`grep -Fi include $mappath \| sed s/'"'//g \| cut -d' ' -f2`
261	fi
262	for included_item in $included_list ; do
263	if [ ! -e "$included_item" ] ; then
264	sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265	[ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266	for ii in $sss ; do
267	[ -e "$ii" ] && AddKeyboardMappingFile $ii
268	done
269	else
270	AddKeyboardMappingFile $included_item
271	fi
272	done
273	}
274
275
276	CopyDependenciesToDirectory() {
277	local outdir incoming counter d found tdir
278	outdir=$1
279	mkdir -p $outdir
280	incoming=`ReadLine`
281	counter=0
282	while [ "$incoming" != "" ] ; do
283	# Non absolute file names should not arrive till here => skipped
284	if [ `echo "$incoming" \| cut -c1` != '/' ]; then
285	LogAll "WARNING: Unable to handle $incoming"
286	incoming=`ReadLine`
287	continue
288	fi
289	# no parent directory of incoming should be a link, copy is not possible in that case
290	d=`dirname "$incoming"`
291	found="false"
292	while [ $d != "/" -a $found = "false" ]; do
293	[ -h "$d" ] && found="true"
294	d=`dirname "$d"`
295	done
296	if [ -d "$incoming" -a ! -h "$incoming" ]; then
297	find $incoming/* -maxdepth 0 2> /dev/null \| CopyDependenciesToDirectory $outdir 0
298	elif [ -e "$incoming" ] && [ $found = "false" ]; then
299	if [ ! -h "$incoming" ]; then
300	tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log \| (cd "$outdir" ; tar xf -) \|\| Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301	else
302	tdir=`dirname "$incoming"`
303	if [ ! -e "$outdir/$tdir" ]; then
304	mkdir -p "$outdir/$tdir"
305	fi
306	cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307	fi
308	# Only uncompress modules if not using udevd
309	if [ "`echo "$incoming" \| grep "lib/modules/.\..o\.gz"`" != "" ] && [ "`ps auxww \| grep -v grep \| grep -qw udevd`" != "" ]; then
310	gunzip -f $outdir/$incoming \|\| LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311	fi
312	[ -x "$outdir" ] && StripExecutable $outdir
313	counter=$(($counter+1))
314	LogProgress $counter $2
315	fi
316	incoming=`ReadLine`
317	done
318	}
319
320
321	CountItemsIn() {
322	local r
323	r=0
324	for q in $1 ; do
325	r=$(($r+1))
326	done
327	echo $r
328	}
329
330
331	DropOptimizedLibraries() {
332	local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333	filelist=$1
334	outdir=$2
335
336	list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337	if [ "$list_of_optimized_libraries" = "" ] ; then
338	return 0
339	fi
340	echo -en "Dropping i686-optimized libraries if appropriate"
341	for optimized_lib_name in $list_of_optimized_libraries ; do
342	echo -en "."
343	reason=""
344	vanilla_lib_name=`echo "$optimized_lib_name" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
345	echo "$vanilla_lib_name" >> $filelist
346	LogFile "INFO: Adding $vanilla_lib_name to filelist"
347	mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348	rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350	# This may return multiple files
351	for resolved in `ReadAllLink $vanilla_lib_name`; do
352	LogFile "INFO: Adding as deps $resolved to filelist"
353	vanilla_resolved_name=`echo "$resolved" \| sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' \| tr -s '/' '/'`
354	if [ "$vanilla_resolved_name" != "$resolved" ]; then
355	mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356	rmdir $outdir$resolved > /dev/null 2> /dev/null
357	ln -sf $vanilla_resolved_name $outdir$resolved
358	LogFile "INFO: Excluding deps $resolved"
359	grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360	LogFile "INFO: Replacing it with $vanilla_resolved_name"
361	echo "$vanilla_resolved_name" >> $filelist.tmp
362	mv -f $filelist.tmp $filelist
363	fi
364	done
365	done
366	$AWK '{ print $1; }' $filelist \| sort -u > $filelist.tmp
367	mv -f $filelist.tmp $filelist
368	echo -e "$DONE"
369	}
370
371
372	FindAndAddUserKeyboardMappingFile() {
373	local r res mapfile mappath included_item included_list keyfile mp locale
374	LogAll "INFO: Analyzing your keyboard's configuration."
375	KEYDIR=/usr/lib/kbd
376	[ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd # Slackware
377	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
378	[ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
379	[ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
380	if [ ! -e "$KEYDIR" ] ; then
381	LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
382	return 0
383	fi
384	if [ -e "/etc/sysconfig/keyboard" ] ; then
385	LogFile "INFO: Red Hat-style config detected."
386	keyfile=/etc/sysconfig/keyboard
387	elif [ -e "/etc/vconsole.conf" ] ; then
388	LogFile "INFO: New Fedora style config detected."
389	keyfile=/etc/vconsole.conf
390	elif [ -e "/etc/rc.d/rc.keymap" ] ; then
391	LogFile "INFO: Slackware-style config detected."
392	keyfile=/etc/rc.d/rc.keymap
393	elif [ -e "/etc/rc.config" ] ; then
394	LogFile "INFO: Debian-style config detected."
395	keyfile=/etc/rc.config
396	elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
397	LogFile "INFO: Debian-style config detected."
398	mkdir -p $bigdir/tmp
399	echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
400	KBDEPTH=0
401	mkdir -p $bigdir/etc/console
402	cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
403	echo ""
404	echo -e "$DONE"
405	return 0
406	elif [ -e "/etc/console-setup/boottime.kmap.gz" ] \|\| [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
407	LogFile "INFO: Ubuntu-style config detected."
408	mkdir -p $bigdir/tmp
409	if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
410	kbdfile="/etc/console-setup/boottime.kmap.gz"
411	else
412	kbdfile="/etc/console-setup/cached.kmap.gz"
413	fi
414	echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
415	KBDEPTH=0
416	mkdir -p $bigdir/etc/console-setup
417	cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
418	echo ""
419	echo -e "$DONE"
420	return 0
421	elif [ -e "/etc/rc.conf" ] ; then
422	LogFile "INFO: ArchLinux config detected."
423	keyfile=/etc/rc.conf
424	elif [ -e "/etc/conf.d/keymaps" ] ; then
425	LogFile "INFO: Gentoo-style config detected."
426	keyfile=/etc/conf.d/keymaps
427	elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
428	LogFile "INFO: X11-style config detected."
429	keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
430	else
431	LogFile "Searching for rc.config ..."
432	keyfile=`find /etc -name rc.config \| head -n1`
433	if [ "$keyfile" = "" ] \|\| [ ! -e "$keyfile" ] ; then
434	LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
435	return
436	else
437	LogFile "INFO: Found $keyfile"
438	fi
439	fi
440	if [ ! -e "$KEYDIR/keymaps" ] ; then
441	LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
442	return
443	fi
444	LogFile "INFO: keyfile=$keyfile"
445	# For SLES we need to remove the .map.gz extension Cf #614
446	locale=`grep -F KEYTABLE "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2 \| sed 's/.map.gz$//'`
447	[ ! "$locale" ] && locale=`grep '.map$' "$keyfile" \| sed 's/^.* //'` # Slackware
448	[ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" \| grep -v '^#' \| tr -d '"' \|cut -d'=' -f2` # Gentoo, ArchLinux & New fedora
449	[ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" \| grep -v '^#' \| awk '{print $3}' \| tr -d '"'` # Fedora 19
450	LogFile "INFO: locale=$locale"
451	#
452	# Process the keymaps dir once for all
453	# AddKeyboardMappingFile will use it recursively
454	#
455	find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
456	mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep -F "/${locale}." \| grep -vx " #."`
457	[ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find \| grep "$locale[^r][^/]" \| grep -vx " #."`
458	# If we have multiple keymaps then log it !!
459	echo "$mp" \| grep -q " " >> $LOGFILE
460	if [ $? -eq 0 ]; then
461	LogAll "WARNING: Multiple keymaps found: $mp"
462	LogFile "INFO: The following one will be used"
463	fi
464	for i in $mp ; do
465	mappath=$i
466	[ -e "$i" ] && [ ! -d "$i" ] && break
467	done
468	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
469	mappath=$(find / -wholename "/kbd/keymaps//$locale \| head -1")
470	fi
471	LogFile "INFO: mappath = $mappath"
472	if [ ! -e "$mappath" ] \|\| [ -d "$mappath" ] ; then
473	LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
474	return
475	fi
476	LogAll "INFO: Adding the following keyboard mapping tables: "
477	mkdir -p $bigdir/tmp
478	echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
479	KBDEPTH=0
480	AddKeyboardMappingFile $mappath
481	echo ""
482	echo -e "$DONE"
483	rm -f $MINDI_TMP/keymaps.find
484	return 0
485	}
486
487
488	FindLdlinux32Binary() {
489	LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
490	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
491	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
492	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
493	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
494	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
495	[ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
496	#[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 \| grep -x "/.*/ldlinux.c32"`
497	if [ ! -e "$LDLINUXC32" ]; then
498	LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
499	LDLINUXC32=/tmp/idoesnthopefullyexist
500	else
501	LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
502	fi
503	}
504
505
506	FindMboot32Binary() {
507	MBOOTC32=/usr/lib/syslinux/mboot.c32
508	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
509	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
510	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
511	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
512	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
513	[ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
514	[ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 \| grep -x "/.*/mboot.c32"`
515	[ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
516	LogFile "INFO: Found mboot.c32 at $MBOOTC32"
517	}
518
519	FindIsolinuxBinary() {
520	ISOLINUX=/usr/lib/isolinux.bin
521	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
522	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
523	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
524	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
525	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
526	[ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
527	[ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin \| grep -x "/.*/isolinux.bin"`
528	[ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
529	LogFile "INFO: Found isolinux.bin at $ISOLINUX"
530	}
531
532
533	FindSpecificModuleInPath() {
534	local modpaths pwd line
535	pwd=`pwd`
536	if [ "$YOUR_KERNEL_SUCKS" ] ; then
537	cd "$MINDI_TMP"
538	else
539	cd /
540	fi
541	if [ ! -e "$1" ] ; then
542	LogAll "WARNING: cannot search specific path '$1'"
543	return 1
544	fi
545	# Find all files and links (required for some VMWare VMs)
546	modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
547	echo "$modpaths"
548	cd "$pwd"
549	}
550
551
552	GenerateGiantDependencyList() {
553	local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
554
555	echo -en "Analyzing dependency requirements"
556	outfile=$1
557	tempfile=$MINDI_TMP/$$.txt
558	incoming=`ReadLine`
559
560	> $tempfile
561	progress=0
562	res=0
563	noof_lines=$2
564	while [ "$incoming" != "" ] ; do
565	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
566	incoming=`ReadLine`
567	continue
568	fi
569	if [ "$incoming" = "LVMFILES:" ] ; then
570	break
571	fi
572	filelist=`GenerateListForFile "$incoming"`
573	r=$?
574	[ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
575	res=$(($res+$r))
576	# LogFile "INFO: '$incoming' generates filelist '$filelist'"
577	for fname in $filelist ; do
578	[ "$fname" != "" ] && echo "$fname" >> $tempfile
579	done
580	progress=$(($progress+1))
581	LogProgress $progress $noof_lines
582	incoming=`ReadLine`
583	done
584	if [ "$incoming" = "LVMFILES:" ] ; then
585	incoming=`ReadLine`
586	lvmversion=""
587	while [ "$incoming" != "" ] ; do
588	if echo "$incoming" \| grep -x " #." &> /dev/null ; then
589	incoming=`ReadLine`
590	continue
591	fi
592	filelist=`GenerateListForFile "$incoming"`
593	for tool in $filelist ; do
594	lvmresolved=`readlink -f $tool`
595	if [ "$tool" = "$lvmresolved" ]; then
596	echo "$tool" >> $tempfile
597	elif echo "$lvmresolved" \| grep "lvmiopversion" &> /dev/null ; then
598	if [ "$lvmversion" = "" ] ; then
599	lvmversion=`$lvmresolved`
600	echo "$lvmresolved" >> $tempfile
601	fi
602	toolstripped=`echo $tool \| $AWK -F / '{print $NF;}'`
603	if [ "$lvmversion" = "200" ]; then
604	# pvdata and lvmcreate_initrd don't exist in LVM2
605	case "$toolstripped" in
606	"pvdata")
607	continue
608	;;
609	"lvmcreate_initrd")
610	continue
611	;;
612	esac
613	fi
614	toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
615	if [ -e "$toolpath" ] ; then
616	echo "$toolpath" >> $tempfile
617	echo "$tool" >> $tempfile
618	else
619	toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
620	fi
621	if [ -e "$toolpath" ] ; then
622	echo "$toolpath" >> $tempfile
623	echo "$tool" >> $tempfile
624	else
625	echo "Where are your LVM-Tools? Couldn't find $tool"
626	fi
627	else
628	echo "$tool" >> $tempfile
629	fi
630	done
631	progress=$(($progress+1))
632	LogProgress $progress $noof_lines
633	incoming=`ReadLine`
634	done
635	fi
636	echo -en "$DONE\nMaking complete dependency list"
637
638	tr -s '/' '/' < $tempfile \| sort -u > $tempfile.new
639	mv -f $tempfile.new $tempfile
640	> $outfile.pre
641	progress=0
642	noof_lines=`cat $tempfile \| wc -l`
643	LogFile "---------------------------------"
644	LogFile "List of dependencies: "
645	LogFile "---------------------------------"
646	for fname in `cat $tempfile` ; do
647	echo "$fname" \| tee -a $LOGFILE >> $outfile.pre
648	LocateDeps $fname \| tee -a $LOGFILE >> $outfile.pre
649	progress=$(($progress+1))
650	LogProgress $progress $noof_lines
651	done
652	if [ _"$MONDO_SHARE" != _"" ]; then
653	mkdir -p $bigdir/tmp
654	mkdir -p $bigdir/usr/bin
655	if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
656	LogAll "\nINFO: Incorporating post-nuke tarball"
657	old_pwd=`pwd`
658	cd "$bigdir"
659	tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log \|\| LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
660	cd "$old_pwd"
661	fi
662	if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
663	LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
664	else
665	LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
666	LogIt " I bet you've got a spare copy of Mondo or Mindi floating around on your system."
667	LogIt " If Mindi was called by Mondo then send me a bug report."
668	LogIt " It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
669	LogIt " Finally, run Mindi again."
670	Die "Odd."
671	fi
672	cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE \|\| LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
673	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
674	LogAll "\nINFO: Incorporating Network-related settings"
675	for r in NETFS-* ISO-PREFIX ; do
676	cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE \|\| Die "Cannot copy $r - did you run out of disk space?"
677	LogFile "INFO: Copying $r to ramdisk"
678	done
679	fi
680	fi
681	tr ' ' '\n' < $outfile.pre \| tr -s '/' '/' \| grep -Fvx "" \| sort -u \| grep -Ev "/libX11\|/libXext\|/libXi\|/libgtk\|/libgdk" > $outfile
682	rm -f $tempfile $outfile.pre
683	[ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" \|\| echo "\nFailed."
684	return $res
685	}
686
687
688	GenerateListForFile() {
689	local files_found loc fname incoming i res
690	incoming="$1"
691	files_found=""
692	res=0
693
694	for fname in $incoming ; do
695	files_found="$files_found `LocateFile $fname`"
696	done
697
698	echo "$files_found" \| tr ' ' '\n' \| sort -u \| tr '\n' ' '
699	}
700
701
702	# Returns all disk devices which are part of a raid array
703	GetAllRaidMembers() {
704	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]device/ if(\$2) {print \$2}" < /etc/raidtab
705	}
706
707
708	GetFileSizeList() {
709	local i
710	for i in `find $1 -type d -o -print` ; do
711	du -sk $i
712	done
713	}
714
715
716	# Check kernel filesystem capabilites for accessing initrd image
717	# Could be ext2 FS (old mode) or initramfs (new mode)
718	#
719	# Interface definition:
720	# param #1: absolute path to kernel image
721	GetInitrdFilesystemToUse() {
722
723	# interface test: make sure we have one parameter
724	if [ $# -ne 1 ]; then
725	Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
726	fi
727
728	# interface parameters
729	local lvKernelImage=$1
730
731	# local constants (filesystem magic strings)
732	local lcMagicCramfs="<3>cramfs: wrong magic"
733	local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
734	local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
735	local lcMagicInitfs="<6>checking if image is initramfs...\|[<]6[>]Unpacking initramfs...\|[<]6[>]Trying to unpack rootfs image as initramfs"
736
737	# local variables
738	local lvOffset
739	local lvScanRes
740	local lvUseFilesystem
741
742	# say where we are.
743	LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
744
745	# verify that file exists
746	[ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
747
748	# Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
749	file $lvKernelImage 2>&1 \| grep -q gzip
750	if [ $? -eq 0 ]; then
751	LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
752	lvScanRes=`gzip -cd $lvKernelImage \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
753	else
754	LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
755	# kernel is x86 boot sector in RHEL3/4 with embedded gzip content
756	# get offet of gzip magic "1f8b0800" in file (for these older kernels)
757	lvOffset=`od -vA n -t x1 $lvKernelImage \| tr -d '[:space:]' \| awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
758	if [ $lvOffset -eq 0 ]; then
759	LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
760	lvScanRes=$lcMagicInitfs
761	else
762	lvOffset=`expr $lvOffset / 2`
763	LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
764	# scan again kernel image
765	lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep -E "$lcMagicCramfs\|$lcMagicExt2fs\|$lcMagicExt3fs\|$lcMagicInitfs" 2> /dev/null`
766	fi
767	fi
768
769	# determine which filesystem to use for initrd image: ext2\|3fs, gzip'ed cpio (initramfs) or cramfs
770	if [ `echo $lvScanRes \| grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
771	lvUseFilesystem="ext2fs"
772	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
773	lvUseFilesystem="ext3fs"
774	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
775	lvUseFilesystem="initramfs"
776	elif [ `echo $lvScanRes \| grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
777	lvUseFilesystem="cramfs"
778	else
779	# In that case, we are most probably after 2.6.30 and use the supported initramfs
780	LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
781	LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
782	LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null \| gunzip -c 2> /dev/null \| strings \| grep initramfs"
783	lvUseFilesystem="initramfs"
784	fi
785
786	# say what we are using
787	LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
788
789	# return file system to use
790	echo "$lvUseFilesystem"
791
792	}
793
794	# Searches members of raid device
795	# $1: raid device (/dev/md...)
796	GetRaidDevMembers() {
797	if [ ! -f /etc/raidtab ]; then
798	return
799	fi
800	$AWK "/^[[:space:]]#/ {next} /^[[:space:]]raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
801	}
802
803
804	HackPathsToFailsafe() {
805	local incoming newpath stub i pwd
806	incoming=`ReadLine`
807	pwd=`pwd`
808	cd "$MINDI_TMP"
809	while [ "$incoming" != "" ] ; do
810	stub=`basename $incoming`
811	newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
812	for i in $newpath ; do
813	echo "$i"
814	done
815	read incoming
816	done
817	cd "$pwd"
818	}
819
820
821	ListAllPartitions() {
822	local res currline partition all_partitions ap_orig remaining i j
823
824	grep -Evx " #.\| none." $MY_FSTAB \| $AWK '/^\/dev\/[imhs]d\|\|^LABEL=\/\|^UUID=/ && !/\/fdd\|\/cdr\|\/zip\|\/floppy/ {print $1}'
825	[ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
826	if [ -e "/vmfs/volumes" ]; then
827	# For VMWare ESX 3 get the device names of these volumes
828	vdf -P \| grep -E '/vmfs/volumes' \| $AWK '{print $1}'
829	fi
830	return
831	}
832
833
834	ListImagesForUser() {
835	local path fname
836	path=$MINDI_CACHE
837	echo -en "In the directory '$path' you will find the images:-\n"
838	for fname in `ls $path \| grep -F mindi-` ; do
839	printf "%19s " $fname
840	done
841	echo " "
842	}
843
844
845	ListKernelModulePaths() {
846	local module_list module fname r kern
847	module_list="$MODULES"
848	# Remove unwanted modules from list
849	for i in $DENY_MODS; do
850	module_list=`echo ${module_list} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
851	EXTRA_MODS=`echo ${EXTRA_MODS} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
852	done
853	###
854	### Sq-Modification ... Use kernelname for module search path if specified
855	###
856	if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
857	then
858	kern=${kernelname}
859	else
860	kern="$KERVERRUN"
861	fi
862	export KERVER=$kern
863	###
864	### Sq-Mod End
865	###
866	# Get rid of duplicates, so that if a live kernel module also appears
867	# in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
868	for module in `echo $module_list $EXTRA_MODS \| tr ' ' '\n' \| sort -u` ; do
869	r=`find /lib/modules/$kern -type f \| grep "/${module}\..*o" \| tail -n1`
870	if [ -z "$r" ]; then
871	if [ "`echo "$MODULES" \| grep -w $module`" ]; then
872	r="[live module file not found]"
873	else
874	r="[extra module file not found]"
875	fi
876	else
877	[ -f "$r" ] && echo "$r"
878	fi
879	LogFile "INFO: module $module --> $r"
880	done
881	find /lib/modules/$kern/modules.* -type f 2> /dev/null
882	}
883
884	#
885	# Critical function which computes all dependencies (dyn. lib.)
886	# for a list of binaries
887	#
888	LocateDeps() {
889	local incoming fname deps
890	incoming="$*"
891	for fname in $incoming ; do
892	if [ ! -e "$fname" ] ; then
893	LogFile "WARNING: $fname does not exist; cannot be LDD'd."
894	if echo $fname \| grep lvm &> /dev/null ; then
895	LogFile " This warning only affects you if you are using LVM."
896	if echo "$MODULES" \| grep lvm &> /dev/null ; then
897	LogFile " I think you are, so please take heed!"
898	else
899	LogFile " I don't think you are, so don't worry about it."
900	fi
901	fi
902	elif [ -h "$fname" ] && [ -x "$fname" ] ; then
903	newf=`readlink -f $fname`
904	LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
905	ldd $newf 2> /dev/null \| ProcessLDD
906	else
907	ldd $fname 2> /dev/null \| ProcessLDD
908	fi
909	done
910	}
911
912
913	# Give all symlinks recursively of a full path name
914	ReadAllLink() {
915	file="$1"
916
917	while [ `echo $file \| grep -Ec '\.\./'` -ne 0 ]; do
918	# We need to normalise the path with .. in it
919	file=`echo $file \| perl -p -e 's\|([^/]*)/([^/]+)/\.\./([^/]+)\|$1/$3\|g'`
920	done
921	echo "$file"
922	if [ ! -h $file ]; then
923	return 0
924	fi
925
926	link=`readlink $file`
927	d=`dirname $file`
928	# Is link a relative or full path name
929	fchar=`echo $link \| cut -c1`
930	# If mother dir is a link print it
931	if [ -h "$d" ]; then
932	echo "$d"
933	d2=`readlink $d`
934	c2=`echo $d2 \| cut -c1`
935	if [ "$c2" != "/" ]; then
936	if [ "$c2" != "." ]; then
937	d="/$d2"
938	else
939	d="$d/$d2"
940	fi
941	fi
942	fi
943	if [ "$fchar" != "/" ]; then
944	# Relative or local link
945	ReadAllLink "$d/$link"
946	else
947	# Absolute path
948	ReadAllLink $link
949	fi
950	}
951
952
953	LocateFile() {
954	local i path fname_to_find location output resolved tmp stub cache_id loclist
955	fname_to_find="$1"
956	# It's an absolute path
957	if echo "$fname_to_find" \| grep -x "/.*" ; then
958	output="$fname_to_find"
959	if [ -h "$output" ] ; then
960	output="`ReadAllLink $output` $output"
961	fi
962	echo "$output"
963	return 0
964	fi
965	# It's not an absolute path
966	output=""
967	for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
968	#for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
969	[ -h "$path" ] && continue
970	[ ! -e "$path/$fname_to_find" ] && continue
971	output="$path/$fname_to_find $output"
972	if [ -h "$path/$fname_to_find" ] ; then
973	output="`ReadAllLink $path/$fname_to_find` $output"
974	fi
975	done
976	if [ "$output" = "" ] ; then
977	return 1
978	fi
979	echo "$output"
980	return 0
981	}
982
983	LogProgress() {
984	local i progress modres noof_lines
985
986	progress=$1
987	noof_lines=$2
988
989	echo -en "\r\t\t\t\t\t\t\t\t"
990	i=$(($progress*100))
991	if [ $noof_lines -ne 0 ]; then
992	i=$(($i/$noof_lines))
993	else
994	i=0
995	fi
996	echo -en "$i"
997	echo -en "%"
998	modres=$(($progress%4))
999	[ "$modres" -eq "0" ] && echo -en "\t/"
1000	[ "$modres" -eq "1" ] && echo -en "\t-"
1001	[ "$modres" -eq "2" ] && echo -en "\t\\"
1002	[ "$modres" -eq "3" ] && echo -en "\t\|"
1003	}
1004
1005	# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
1006	MakeMondoConfigFile() {
1007	local outfile use_lzo use_comp use_star
1008	outfile=$1
1009	> $outfile
1010	[ "$TAPESIZE" ] && echo "media-size $TAPESIZE" >> $outfile
1011	[ "$TAPEDEV" ] && echo "media-dev $TAPEDEV" >> $outfile
1012	[ "$USBDEVICE" ] && echo "usb-dev $USBDEVICE" >> $outfile
1013	[ "$FILES_IN_FILELIST" ] && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
1014	[ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1015	[ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1016	use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1017	use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1018	use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
1019	use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1020	use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1021	echo "use-lzo $use_lzo" >> $outfile
1022	echo "use-gzip $use_gzip" >> $outfile
1023	echo "use-star $use_star" >> $outfile
1024	echo "use-lzma $use_lzma" >> $outfile
1025	echo "use-comp $use_comp" >> $outfile
1026	echo "datestamp `date`" >> $outfile
1027	[ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1028	AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV netfs-dev $outfile
1029	AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO netfs-proto $outfile
1030	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1031	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1032	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1033	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1034	AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW netfs-client-defgw $outfile
1035	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT netfs-server-mount $outfile
1036	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER netfs-server-user $outfile
1037	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH netfs-server-path $outfile
1038	AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1039	AddFileToCfgIfExists $MINDI_TMP/ISO-DEV iso-dev $outfile
1040	AddFileToCfgIfExists $MINDI_TMP/ISO-MNT iso-mnt $outfile
1041	AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX iso-prefix $outfile
1042	AddFileToCfgIfExists $MINDI_TMP/ISODIR isodir $outfile
1043	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1044	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME bootloader.name $outfile
1045	AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER bootloader.ver $outfile
1046	AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1047	AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1048	AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1049	AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL differential $outfile
1050	AddFileToCfgIfExists $MINDI_TMP/ACL acl $outfile
1051	AddFileToCfgIfExists $MINDI_TMP/XATTR xattr $outfile
1052	AddFileToCfgIfExists $MINDI_TMP/OBDR obdr $outfile
1053	}
1054
1055	# Get PV's for an LV
1056	GetPVsForLV() {
1057	if [ -n "$1" ]; then
1058	vg=`$LVMCMD lvdisplay $1 2>/dev/null \|awk '/VG Name/{print $NF;exit}'`
1059	if [ -z "$vg" ]; then
1060	return
1061	fi
1062	$LVMCMD vgdisplay -v $vg 2>/dev/null \| awk '/PV Name/{print $NF}'
1063	fi
1064	}
1065
1066
1067	MakeMountlist() {
1068	local mountlist all_partitions current_partition \
1069	partition_size partition_format outstring partition_number \
1070	partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1071	absolute_partition old_partition_fmt current_lvolume uname skip
1072
1073	LogFile "------------------------------------"
1074	LogFile "Your raw fstab file looks like this:"
1075	LogFile "------------------------------------"
1076	cat $MY_FSTAB >> $LOGFILE
1077	LogAll "-----------------------------------"
1078	LogAll "Your mountlist will look like this:"
1079	LogAll "-----------------------------------"
1080
1081	# mountlist(OUT)
1082	mountlist=$1
1083
1084	# NB: partition = device
1085	# NB: mountpt = where the device is mounted
1086
1087	[ -e "$MY_FSTAB" ] \|\| Die "Cannot find your fstab file ($MY_FSTAB)"
1088
1089	[ "$mountlist" != "" ] && rm -Rf $mountlist
1090	> $mountlist
1091	all_partitions=""
1092
1093	if [ $LVM != "false" ]; then
1094	LogAll "INFO: Analyzing LVM..."
1095	$MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1096	if [ $? -ne 0 ]; then
1097	LVM="false"
1098	fi
1099	# Excluded LVs and GVs are not reported here
1100	all_partitions=`cat $MINDI_TMP/lvm.res \| grep -F ">>>" \| cut -d' ' -f2-`
1101	fi
1102	all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1103	for i in $IMAGE_DEVS ; do
1104	mount \| grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1105	done
1106	[ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" \| tr ' ' '\n' \| sort -u \| tr '\n ' ' '`"
1107	printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID \| tee -a $LOGFILE
1108	printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------ ------- ---------- \| tee -a $LOGFILE
1109	useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1110	for c_p in $all_partitions ; do
1111	# Skip fd/cd devices, network FS, cifs
1112	[ "`echo "$useless_dev" \| grep -F "$c_p"`" != "" ] \|\| [ "`echo "$c_p" \| grep ":"`" != "" ] \|\| [ "`echo "$c_p" \| grep -E "^//"`" != "" ]&& continue
1113	[ "`echo "$c_p" \| grep -x "/dev/cdroms.*"`" ] && continue
1114	if [ -h "$c_p" ] && [ "`echo "$c_p" \| grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" \| grep -F "/dev/md"`" = "" ] ; then
1115	current_partition=`readlink -f $c_p`
1116	if [ "`echo "$current_partition" \| grep -F "/dev/mapper"`" != "" ]; then
1117	current_partition="$c_p"
1118	elif [ "`echo $current_partition \| grep -E '^/dev/dm-'`" ]; then
1119	# For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1120	current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1121	fi
1122	[ "`echo "$useless_dev" \| grep -F "$current_partition"`" ] && continue
1123	else
1124	current_partition="$c_p"
1125	fi
1126	[ "$c_p" = "none" ] && continue
1127	redhat_label=""
1128	label=""
1129	uuid=""
1130	absolute_partition=`readlink -f $c_p`
1131	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$current_partition" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1132
1133	# set default in case we dont't find it
1134	str_to_find_fmt_with=$current_partition
1135
1136	# This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1137	# current_partition contains only first column of /etc/fstab
1138	if [ "`echo "$current_partition" \| grep -i "LABEL="`" != "" ]; then
1139	redhat_label=`echo "$current_partition" \| cut -d'=' -f2`
1140	actual_dev=""
1141
1142	# 1st try, findfs - the RHEL way of finding labels and their partitions
1143	if [ -x "/sbin/findfs" ]; then
1144	actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1145	fi
1146
1147	# 2nd try : blkid, the good way for all LABEL except swap
1148	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1149	actual_dev=`/sbin/blkid \| grep "$redhat_label" \| grep LABEL= \| cut -d':' -f1`
1150	# For LVM FS it will give a /dev/dm-# which should then be converted
1151	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1152	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1153	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1154	for dev in `ls /dev/mapper/*`; do
1155	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1156	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1157	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1158	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1159	break
1160	fi
1161	done
1162	fi
1163	fi
1164
1165	# 3rd try, which works on a standard partition (ext2/3), but not on swap
1166	# For LVM gives a /dev/mapper entry
1167	if [ "x$actual_dev" = "x" ]; then
1168	actual_dev=`/bin/mount -l \| grep "\[$redhat_label\]" \| cut -d' ' -f1`
1169	fi
1170
1171	# 4th try, with vol_id
1172	# SWAP only
1173	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1174	list_swaps=`cat /proc/swaps \| grep "/dev/" \| $AWK '{ print $1 }' `
1175	for dev_swap in $list_swaps ; do
1176	dev_exists=`/sbin/vol_id $dev_swap \| grep "$redhat_label"`
1177	if [ "x$dev_exists" != "x" ]; then
1178	actual_dev=$dev_swap
1179	break;
1180	fi
1181	done
1182	fi
1183
1184	# 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1185	# LABEL=SW-cciss/c0d0p3 (RDP)
1186	# or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1187	# SWAP only
1188	if [ "x$actual_dev" = "x" -a _"`echo $current_partition \| grep -iE 'LABEL=SWAP\|LABEL=SW-'`" != _"" ]; then
1189	skip=""
1190	uname=$KERVERRUN
1191	[ "`echo $uname \| grep "2.4.[0-9]"`" != "" ] && skip=16
1192	# 2.6.12 needs 16 (FC3)
1193	[ "`echo $uname \| grep "2.6.[0-1]"`" != "" ] && skip=16
1194	# 2.6.19 and upper needs 1052
1195	[ "`echo $uname \| grep "2.6.19"`" != "" ] && skip=1052
1196	[ "`echo $uname \| grep "2.6.[2-9]"`" != "" ] && skip=1052
1197	[ "`echo $uname \| grep "3.[0-9].[0-9]"`" != "" ] && skip=1052
1198	if [ $skip = "" ]; then
1199	Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1200	fi
1201	for try_dev in `tail +2 /proc/swaps \| cut -d' ' -f1`
1202	do
1203	# Location of the swap label for kernel 2.6
1204	try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1205	if [ "x$try_dev_label" = "x$redhat_label" ]; then
1206	actual_dev=$try_dev
1207	fi
1208	done
1209	fi
1210
1211	# Check if one of all those tries has known success
1212	if [ "x$actual_dev" != "x" ]; then
1213	current_partition=$actual_dev
1214	else
1215	Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs\|blkid\|vol_id"
1216	fi
1217	# This part tries to retrieve the correct device from a UUID line in /etc/fstab
1218	# current_partition contains only first column of /etc/fstab
1219	elif [ "`echo "$current_partition" \| grep -i "UUID="`" != "" ]; then
1220	uuid=`echo "$current_partition" \| cut -d'=' -f2`
1221	actual_dev=""
1222
1223	# 1st try, findfs - the RHEL way of finding labels and their partitions
1224	if [ -x "/sbin/findfs" ]; then
1225	actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1226	fi
1227
1228	# 2nd try : blkid, the good way for all UUID except swap
1229	if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1230	actual_dev=`/sbin/blkid \| grep "$uuid" \| grep UUID= \| cut -d':' -f1`
1231	# For LVM FS it will give a /dev/dm-# which should then be converted
1232	if [ $LVM = "v2" ] && [ "`echo $actual_dev \| grep '/dev/dm'`" ]; then
1233	major=`/bin/ls -l $actual_dev \| $AWK '{print $5}'`
1234	minor=`/bin/ls -l $actual_dev \| $AWK '{print $6}'`
1235	for dev in `ls /dev/mapper/*`; do
1236	major1=`/bin/ls -l $dev \| $AWK '{print $5}'`
1237	minor1=`/bin/ls -l $dev \| $AWK '{print $6}'`
1238	if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1239	actual_dev=`/bin/ls -l $dev \| $AWK '{print $10}'`
1240	break
1241	fi
1242	done
1243	fi
1244	fi
1245
1246	# 3th try, with vol_id
1247	if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1248	list_dev=`mount \| grep -E '^/' \| $AWK '{ print $1 }' `
1249	for dev in $list_dev ; do
1250	dev_exists=`/sbin/vol_id $dev \| grep "$uuid"`
1251	if [ "x$dev_exists" != "x" ]; then
1252	actual_dev=$dev
1253	break;
1254	fi
1255	done
1256	fi
1257
1258	# 4th try, with dumpuuid (VMWare only ?) for swap
1259	if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1260	list_dev=`cat /proc/swaps \| grep -E '^/' \| $AWK '{ print $1 }' `
1261	for dev in $list_dev ; do
1262	dev_exists=`/sbin/dumpuuid $dev \| grep "$uuid"`
1263	if [ "x$dev_exists" != "x" ]; then
1264	actual_dev=$dev
1265	break;
1266	fi
1267	done
1268	fi
1269
1270	# Check if one of all those tries has known success
1271	if [ "x$actual_dev" != "x" ]; then
1272	current_partition=$actual_dev
1273	else
1274	Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs\|blkid\|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1275	fi
1276	else
1277	# Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1278	# they use symlinks in fstab unrelated to what is shown in mount !
1279	if [ _"$partition_mountpt" = _"" ]; then
1280	# set default in case we dont't find it
1281	for tmpp in `tr -s '\t' ' ' < $MY_FSTAB \| grep -Ev "^#" \| $AWK '{print $1}'`; do
1282	if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1283	str_to_find_fmt_with=$tmpp
1284	partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$tmpp" \| grep -vx " #." \| $AWK '{print $2}' \| head -n1`
1285	break;
1286	fi
1287	done
1288	fi
1289	fi
1290
1291	# Detects noauto partitions not mounted and exclude them
1292	partition_option=`tr -s '\t' ' ' < $MY_FSTAB \| grep -w "$str_to_find_fmt_with" \| grep -vx " #." \| $AWK '{print $4}' \| head -n1`
1293	if [ "`echo "$partition_option" \| grep -i noauto`" != "" ] && [ "`mount \| grep -w "$partition_mountpt"`" = "" ] ; then
1294	LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1295	continue
1296	fi
1297	# Detects bind partitions and exclude them
1298	if [ "`echo "$partition_option" \| grep -iw bind`" != "" ]; then
1299	LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1300	continue
1301	fi
1302
1303	# Look for devices which have to be excluded
1304	skip=0
1305	if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1306	l=""
1307	list_of_devices="`ReadAllLink $current_partition`"
1308	for d in $list_of_devices; do
1309	l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1310	done
1311
1312	# Remove PVs from LVs excluded
1313	l="$l `GetPVsForLV $current_partition`"
1314
1315	# We want a single unique list
1316	list_of_devices="`echo $l \| sort -u`"
1317
1318	for d in `echo $MINDI_EXCLUDE_DEVS \| sed 's/\|/ /g'`; do
1319	if [ "`echo " $list_of_devices " \| grep " $d"`" != "" ]; then
1320	LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1321	skip=1
1322	continue
1323	fi
1324	done
1325	fi
1326	if [ $skip -eq 1 ]; then
1327	continue
1328	fi
1329
1330	partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1331	# Detects iso9660 ISO images and exclude them
1332	if [ "`echo "$partition_format" \| grep -iw iso9660`" != "" ]; then
1333	LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1334	continue
1335	fi
1336	# Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1337	# for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1338	# the former is then a link to the latter, so we test whether
1339	# $current_partition is actually such a link or not and set
1340	# $current_lvolume accordingly. On Debian you may find more than one answer
1341	# so we remove the one corresponding to /dev/.static
1342	# On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1343	# principle is the same and we need to find the link to it as well.
1344	# Note that $current_lvolume may well be an
1345	# ordinary device. It is just to make sure that we feed the right value
1346	# into any of the LVM tools if possible.
1347
1348	current_lvolume="$current_partition"
1349	if [ $LVM = "v2" ] && [ "`echo $current_partition \| grep -E '^/dev/mapper/'`" ]; then
1350	# .static dir are a Debian specificity
1351	current_lvolume="`find /dev -lname "$current_partition" \| grep -Ev '^/dev/\.static/'`"
1352	echo $current_lvolume \| grep -q ' '
1353	if [ $? -eq 0 ]; then
1354	LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1355	fi
1356	# if it's not found, it may well be a real device such as a multipath one
1357	# /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1358	if [ _"$current_lvolume" = _"" ]; then
1359	current_lvolume="$current_partition"
1360	fi
1361	fi
1362	#
1363	# End of LVM device style variation code (other than $current_lvolume).
1364
1365	if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1366	# Size computed via LVM not directly
1367	partition_size="lvm"
1368	else
1369	[ "`echo "$current_partition" \| grep "[0-9]"`" = "" ] && continue
1370	[ "`echo "$current_partition" \| grep -c "^/"`" -ne "1" ] && continue
1371	if [ "$partition_format" = "swap" ] \|\| [ "$partition_mountpt" = "swap" ] ; then
1372	# Skip swap files
1373	[ "`echo "$current_partition" \| grep -E "^/dev"`" = "" ] && continue
1374	partition_size=`grep -Fv "Priority" /proc/swaps \| tr -s '\t' ' ' \| grep -F "$current_partition " \| $AWK '{print $3}'`
1375	[ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1376	[ "$partition_format" != "swap" ] && partition_format="swap"
1377	if [ "$partition_size" = "" ] ; then
1378	totalsize=0
1379	items=0
1380	for i in `tr -s ' ' '\t' < /proc/swaps \| grep -Fv "Filename" \| cut -f3` ; do
1381	totalsize=$(($totalsize+$i))
1382	items=$(($items+1))
1383	done
1384	[ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) \|\| partition_size=0
1385	[ "$partition_size" -lt "125000" ] && partition_size=125000
1386	LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1387	fi
1388	else
1389	partition_size=`SizeOfPartition $current_partition`
1390	fi
1391	fi
1392	[ "$partition_mountpt" = "swap" ] && partition_format="swap"
1393	[ "$partition_format" = "swap" ] && partition_mountpt="swap"
1394	if [ "$partition_mountpt" = "" ] ; then
1395	if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1396	if [ "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1397	partition_mountpt="raid"
1398	partition_format="raid"
1399	else
1400	partition_mountpt="lvm"
1401	partition_format="lvm"
1402	fi
1403	fi
1404	fi
1405	psz=$partition_size
1406	LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1407	[ "$psz" != "lvm" ] && psz=$(($psz/1024))
1408	if [ "`echo " $IMAGE_DEVS " \| grep -F " $current_partition "`" != "" ] ; then
1409	partition_mountpt="image"
1410	old_partition_fmt=$partition_format
1411	partition_format="`$FDISK -l 2>> $LOGFILE \| tr '*' ' ' \| tr '+' ' ' \| tr -s ' ' '\t' \| grep -w "$absolute_partition" \| cut -f5`"
1412	partition_size=$(($partition_size+1)); # just in case
1413	if [ "$partition_format" = "Linux" ] ; then
1414	LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1415	LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1416	partition_format=$old_partition_fmt
1417	fi
1418	fi
1419
1420	if [ ! "$partition_mountpt" ] ; then
1421	LogFile "------- $FDISK -l $qq log ------------"
1422	for qq in "" `find /dev/ida/cd ! -name 'p' 2> /dev/null`; do
1423	partition_format=`$FDISK -l $qq 2>> $LOGFILE \| grep -w "$c_p" \| sed 's/12/\|/' \| tr -s '\t' ' ' \| cut -d'\|' -f2 \| cut -d' ' -f2-9`
1424	[ "$partition_format" ] && break
1425	done
1426	LogFile "------- $FDISK log end ------------"
1427	if [ "$partition_format" = "Compaq diagnostics" ] ; then
1428	partition_format="compaq"
1429	elif [ ! "`grep -F device /etc/raidtab 2> /dev/null \| grep -w $current_partition`" ] ; then
1430	LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1431	continue
1432	fi
1433	fi
1434	if [ "$redhat_label" ]; then
1435	label="$redhat_label"
1436	elif [ "$uuid" ]; then
1437	label="$uuid"
1438	fi
1439
1440	# On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1441	# in order to mount the root part e.g. in grub.
1442	# One way to solve this is to add the UUID now, if there wasn't one so it's
1443	# restored correctly
1444	if [ _"$label" = _"" ]; then
1445	label=`blkid $current_partition \| perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1446	fi
1447
1448	partition_format="`echo "$partition_format" \| cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1449	[ "$partition_format" = "auto" ] && partition_format="`mount \| grep -w $current_partition \| $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1450	unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1451	if [ "$current_partition" = "" ] ; then
1452	LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1453	elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1454	if [ "`grep -F device /etc/raidtab 2>/dev/null \| grep -F $current_partition`" ] ; then
1455	partition_mountpt=raid
1456	partition_format=raid
1457	printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1458	printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1459	else
1460	LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1461	fi
1462	elif [ "$partition_format" = "" ] ; then
1463	LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1464	elif [ "$partition_size" = "" ] ; then
1465	LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1466	elif [ "$partition_mountpt" = "/proc" ] \|\| [ "$partition_mountpt" = "/dev/pts" ] ; then
1467	continue
1468	else
1469	if [ "$partition_format" = "dos" ] \|\| [ "$partition_format" = "msdos" ] ; then
1470	LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1471	partition_format="vfat"
1472	fi
1473	printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" \| tee -a $LOGFILE
1474	printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1475	fi
1476	done
1477	LogAll "-----------------------------------"
1478	}
1479
1480	CheckMountlist() {
1481	local file=$1
1482	# Coherency verification
1483	ML01=`cat $file \| wc -l`
1484	ML02=`grep -vE ' lvm \| raid \| swap ' $file \| wc -l`
1485	ML1=`$AWK '{print $1}' $file \| sort -u \| wc -l`
1486	ML2=`grep -vE ' lvm \| raid \| swap ' $file \| $AWK '{print $2}' \| sort -u \| wc -l`
1487	if [ "$ML01" -ne "$ML1" ]; then
1488	LogFile "--------------------------------------------"
1489	LogAll "WARNING: Duplicate device entry in mountlist"
1490	LogFile "--------------------------------------------"
1491	fi
1492	if [ "$ML02" -ne "$ML2" ]; then
1493	LogFile "--------------------------------------------"
1494	LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1495	LogFile "------------------------------------------------"
1496	fi
1497	}
1498
1499	OfferToMakeBootableISO() {
1500	local i old_pwd
1501	if [ -z "$ISO_CMD" ]; then
1502	LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1503	return
1504	fi
1505	if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1506	echo -en "Shall I make a bootable CD image? (y/[n]) "
1507	read i
1508	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1509	fi
1510	rm -Rf $MINDI_TMP/iso
1511	mkdir -p $MINDI_TMP/iso/{images,archives}
1512	LogFile "INFO: mindi_lib = $MINDI_LIB"
1513	cp -f $MINDI_CACHE/{.gz,.img} $MINDI_TMP/iso/images 2>> $LOGFILE \|\| LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1514	for i in memdisk memtest.bin memtest.img ; do
1515	j=$MINDI_LIB/$i
1516	k=$MINDI_TMP/iso
1517	if [ -e "$j" ] ; then
1518	LogAll "INFO: Copying $j to $k"
1519	cp -f $j $k 2>> $LOGFILE \|\| Die "Failed to copy $j to $k"
1520	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| Die "Failed to copy $j to $MINDI_TMP"
1521	if [ _"$MONDO_SHARE" != _"" ]; then
1522	cp -f $j $MONDO_ROOT 2>> $LOGFILE \|\| Die "Failed to copy $j to $MONDO_ROOT"
1523	fi
1524	fi
1525	done
1526	MakeMessageFile $MINDI_TMP/iso \| cut -c1-80 > $MINDI_TMP/iso/message.txt
1527	if [ $KERNEL_IS_XEN = "yes" ]; then
1528	FindMboot32Binary
1529	cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE \|\| Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1530	cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32 2>> $LOGFILE \|\| Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1531	fi
1532	# Useful for syslinux 5.x
1533	FindLdlinux32Binary
1534	if [ -e $LDLINUXC32 ]; then
1535	cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32 2>> $LOGFILE \|\| Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1536	fi
1537	cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1538	cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1539
1540	if [ _"$MONDO_SHARE" != _"" ]; then
1541	if [ $KERNEL_IS_XEN = "yes" ]; then
1542	cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE \|\| Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1543	cp $MBOOTC32 $MONDO_ROOT/mboot.c32 2>> $LOGFILE \|\| Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1544	fi
1545	if [ -e $LDLINUXC32 ]; then
1546	cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32 2>> $LOGFILE \|\| Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1547	fi
1548	cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1549	cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE \|\| Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1550	fi
1551	MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1552	if [ "$ARCH" != "ia64" ] ; then
1553	cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE \|\| Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1554	fi
1555	old_pwd=`pwd`
1556	cd "$MINDI_TMP/iso"
1557	if [ "$ARCH" != "ia64" ] ; then
1558	if [ _"$MONDO_SHARE" != _"" ]; then
1559	cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1560	if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1561	cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1562	fi
1563	if [ $KERNEL_IS_XEN = "yes" ]; then
1564	cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE \|\| Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1565	fi
1566	cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1567	fi
1568	$ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1569	else
1570	$ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1571	fi
1572	if [ "$?" -ne "0" ] ; then
1573	LogFile "----------- $ISO_CMD's errors --------------"
1574	LogAll "$ISO_CMD returned the following errors:"
1575	cat $MINDI_TMP/mkisofs.log \| tee -a $LOGFILE
1576	LogAll "ERROR: Failed to create ISO image."
1577	else
1578	LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1579	fi
1580	rm -f $MINDI_TMP/mkisofs.log
1581	cd "$old_pwd"
1582	}
1583
1584
1585	OfferToMakeBootableUSB() {
1586	local i
1587	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1588	echo -n "Shall I make a bootable USB device ? (y/[n]) "
1589	read i
1590	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1591	if [ "$USBDEVICE" = "" ]; then
1592	echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1593	read dev
1594	USBDEVICE=$dev
1595	fi
1596	echo "WARNING: This will erase all content on $USBDEVICE"
1597	echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1598	read i
1599	[ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1600	fi
1601	rm -Rf $MINDI_TMP/usb
1602	mkdir -p $MINDI_TMP/usb
1603	USBPART="${USBDEVICE}1"
1604
1605	echo -en "Transforming $USBDEVICE in a Bootable device "
1606	echo -en "."
1607	LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1608	LogFile "INFO: Checking $USBDEVICE"
1609	$FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1610	if [ $? -ne 0 ]; then
1611	LogAll "ERROR: Unable to access $USBDEVICE"
1612	LogAll " Make sure your USB device is plugged in"
1613	MindiExit -1
1614	fi
1615	echo -en "."
1616	# Some distro do auto mount at that point (Ubuntu)
1617	LogFile "INFO: Unmounting $USBPART just in case"
1618	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1619	# If your key has no MBR it may cause an issue
1620	# Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1621	if [ -r $MBRFILE ]; then
1622	LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1623	dd if=$MBRFILE of=$USBDEVICE
1624	else
1625	LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1626	LogAll " on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1627	fi
1628	LogFile "INFO: Preparing $USBDEVICE"
1629	cat > $MINDI_TMP/fdisk.txt << EOF
1630	d
1631	d
1632	d
1633	d
1634	n
1635	p
1636	1
1637
1638
1639	t
1640	b
1641	a
1642	1
1643	w
1644	EOF
1645	$FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1646	if [ $? -ne 0 ]; then
1647	LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1648	LogAll " Make sure your USB device is plugged in"
1649	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1650	MindiExit -1
1651	fi
1652	LogFile "fdisk build file"
1653	LogFile "----------------"
1654	cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1655	LogFile "----------------"
1656	rm -f $MINDI_TMP/fdisk.txt
1657	LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1658	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1659	echo -en "."
1660	# Calling kpartx in case devices were not created
1661	if [ -x "/sbin/kpartx" ]; then
1662	/sbin/kpartx -a $USBDEVICE
1663	fi
1664	# Some distro do auto mount at that point (Ubuntu)
1665	LogFile "INFO: Unmounting $USBPART just in case again"
1666	umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1667	echo -en "."
1668	# Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1669	if [ "`which dmsetup`" != "" ]; then
1670	block_id="`echo $USBPART \| sed 's\|/dev/\|\|g'`"
1671	if [[ "`dmsetup ls \| awk '{print $1}' \| grep $block_id`" != "" ]]; then
1672	LogFile "INFO: Removing $block_id from device mapper."
1673	sleep 1
1674	dmsetup remove $block_id
1675	fi
1676	fi
1677	echo -en "."
1678	LogFile "INFO: Creating a vfat filesystem on $USBPART"
1679	mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1680	if [ $? -ne 0 ]; then
1681	LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1682	LogAll " Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1683	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1684	MindiExit -1
1685	fi
1686	echo -en "."
1687	LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1688	mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1689	if [ $? -ne 0 ]; then
1690	LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1691	LogAll " Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1692	$FDISK -l $USBDEVICE 2>&1 \| tee -a $LOGFILE
1693	MindiExit -1
1694	fi
1695	echo -en "."
1696	mkdir -p $MINDI_TMP/usb/images
1697	cp -f $MINDI_CACHE/.img $MINDI_CACHE/.gz $MINDI_TMP/usb/images 2>> $LOGFILE \|\| LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1698	echo -en "."
1699	LogFile "INFO: mindi_lib = $MINDI_LIB"
1700	for i in memdisk memtest.bin memtest.img ; do
1701	j=$MINDI_LIB/$i
1702	k=$MINDI_TMP/usb
1703	if [ -e "$j" ] ; then
1704	LogIt "INFO: Copying $j to $k"
1705	cp -f $j $k 2>> $LOGFILE \|\| Die "Failed to copy $j to $k"
1706	cp -f $j $MINDI_TMP 2>> $LOGFILE \|\| Die "Failed to copy $j to $MINDI_TMP"
1707	fi
1708	done
1709	echo -en "."
1710	MakeMessageFile $MINDI_TMP/usb \| cut -c1-80 > $MINDI_TMP/usb/message.txt
1711	echo -en "."
1712	cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE \|\| Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1713	echo -en "."
1714	cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1715	echo -en "."
1716	MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1717	echo -en "."
1718	LogAll "----------- syslinux's conf --------------"
1719	cat $MINDI_TMP/usb/syslinux.cfg \|tee -a $LOGFILE
1720	LogAll "------------------------------------------"
1721	umount $MINDI_TMP/usb
1722	if [ "$ARCH" != "ia64" ] ; then
1723	syslinux -v 2>&1 \| grep -q 4.02
1724	if [ $? -eq 0 ]; then
1725	# This buggy version of syslinux requires a call to --stupid and not -s
1726	syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1727	res=$?
1728	else
1729	syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1730	res=$?
1731	fi
1732	if [ $res -ne 0 ] ; then
1733	LogAll "----------- syslinux's errors --------------"
1734	cat $MINDI_TMP/syslinux.log \|tee -a $LOGFILE
1735	LogAll "------------------------------------------"
1736	LogIt "ERROR: Failed to create USB image."
1737	else
1738	echo -e "$DONE"
1739	LogFile "INFO: Created bootable USB image on $USBDEVICE"
1740	fi
1741	rm -f $MINDI_TMP/syslinux.log
1742	else
1743	LogAll "ERROR: No USB boot support for ia64"
1744	MindiExit -1
1745	fi
1746	}
1747
1748
1749	MakeMessageFile() {
1750
1751	if [ -x "/bin/lsb_release" ]; then
1752	DESC=`/bin/lsb_release -d \| cut -d: -f2 \| sed "s/[ \t]*//"`
1753	elif [ -r /etc/arch-release ]; then # this code must be written before /etc/issue test to avoid errors
1754	DESC="Arch Linux"
1755	if [ -r /var/log/pacman.log ]; then
1756	# there are no releases but we can get the last system upgrade
1757	# Output example: Arch Linux [2011-03-03 01:39]
1758	DESC="$DESC $(tac /var/log/pacman.log \| grep -m1 'full system upgrade' \| cut -d']' -f1)]"
1759	fi
1760	elif [ -r /etc/issue.net ]; then
1761	DESC=`head -1 /etc/issue.net`
1762	elif [ -r /etc/issue ]; then
1763	DESC=`head -1 /etc/issue`
1764	elif [ -x "/usr/bin/pbdistrocheck" ]; then
1765	# For pb >= 0.9.8
1766	DESC=`/usr/bin/pbdistrocheck -s \| cut -d, -f1-4`
1767	else
1768	DESC="Unknown desc"
1769	fi
1770	sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt \| sed "s/KKKKK/Kernel $KERVER/" \| sed "s/AAAAA/on a $ARCH architecture/" \| sed "s/TTTTT/`LC_TIME=C date`/" \| sed "s/MMMMM/`hostname`/" \| sed "s/DDDDD/$DESC/"
1771	if [ _"$MONDO_SHARE" != _"" ]; then
1772	if [ "$CDRECOVERY" != "yes" ] ; then
1773	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1774	echo -en "Press <enter> to continue.\n"
1775	echo -en "$BOOT_MEDIA_MESSAGE"
1776	elif [ ! "$MINDI_TMP" ] ; then
1777	echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1778	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1779	echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1780	fi
1781	else
1782	echo -en "$BOOT_MEDIA_MESSAGE"
1783	fi
1784	else
1785	echo -en "\
1786	To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1787	CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1788	fi
1789	fi
1790
1791	# Also create the other help screens
1792	head -24 $MINDI_CONF/README.bootparam \| cut -c1-80 > $1/boot1.txt
1793	head -48 $MINDI_CONF/README.bootparam \| tail -24 \| cut -c1-80 > $1/boot2.txt
1794	head -24 $MINDI_CONF/README.pxe \| cut -c1-80 > $1/pxe.txt
1795	}
1796
1797
1798	MakeBootConfFile() {
1799	local options i ooo
1800	options=""
1801	# Type of boot file (elilo or syslinux/isolinux)
1802	type=$1
1803	if [ "$type" = "elilo" ]; then
1804	sep="="
1805	else
1806	sep=" "
1807	fi
1808
1809	# Generic header for conf file
1810	if [ "$type" != "elilo" ] ; then
1811	echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1812	else
1813	echo -en "prompt\n"
1814	fi
1815
1816	# Compute which default option to boot from
1817	if [ "$CDRECOVERY" = "yes" ] ; then
1818	echo -en "default${sep}RESTORE\n"
1819	# In case it's mondoarchive
1820	elif [ _"$MONDO_SHARE" != _"" ]; then
1821	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1822	echo -en "default${sep}iso\n"
1823	else
1824	echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1825	fi
1826	else
1827	echo -en "default${sep}expert\n"
1828	fi
1829
1830	# Handle timeout
1831	if [ "$CDRECOVERY" != "yes" ] ; then
1832	echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1833	else
1834	echo -en "timeout${sep}10000\n"
1835	fi
1836	echo -en "\n"
1837
1838	# prepare which labels will be generated
1839	if [ "$CDRECOVERY" = "yes" ] ; then
1840	options="RESTORE expert"
1841	else
1842	if [ _"$MONDO_SHARE" != _"" ]; then
1843	options="interactive expert compare iso nuke isonuke"
1844	else
1845	options="expert"
1846	fi
1847	fi
1848
1849	# Generate rest of conf file
1850	for i in $options ; do
1851	ooo=$i
1852	[ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1853	if [ "$type" = "elilo" ]; then
1854	outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1855	else
1856	ps="/"
1857	if [ "$type" = "syslinux" ]; then
1858	ps=""
1859	fi
1860	if [ $KERNEL_IS_XEN = "no" ]; then
1861	outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1862	else
1863	outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1864	fi
1865	fi
1866	echo -en "$outstr"
1867	done
1868	if [ -e "$MINDI_LIB/memtest.img" ] ; then
1869	if [ "$type" = "elilo" ]; then
1870	echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1871	echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1872	else
1873	ps="/"
1874	if [ "$type" = "syslinux" ]; then
1875	ps=""
1876	fi
1877	echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1878	echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1879	fi
1880	fi
1881	}
1882
1883
1884	PrepareBootDiskImage_LILO() {
1885	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1886	imagesdir=$MINDI_CACHE
1887	kernelpath=$1
1888
1889	retval=0
1890
1891	old_pwd=`pwd`
1892	[ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1893	echo -en "Making "$BOOT_SIZE"KB boot disk..."
1894	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1895	echo -en "..."
1896	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1897	mountpoint=$MINDI_TMP/mountpoint.$$
1898	mkdir -p $mountpoint
1899	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
1900	LogFile "Creating vfat filesystem on $imagefile"
1901	mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1902	mount -t vfat -o loop $imagefile $mountpoint \|\| LogAll "ERROR: Cannot mount (PBDI)"
1903
1904	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1905	mkdir -p $mountpoint/etc
1906	liloconf=$mountpoint/elilo.conf
1907
1908	MakeBootConfFile elilo > $liloconf
1909
1910	# Copy it so that CD-ROM menu entry is satisfied
1911	mountefi=0
1912	df -T \| grep /boot/efi \| grep -q vfat
1913	if [ $? -ne 0 ]; then
1914	mount /boot/efi
1915	if [ $? -ne 0 ]; then
1916	echo "You have to mount your EFI partition when using mindi"
1917	MindiExit -1
1918	fi
1919	mountefi=1
1920	fi
1921	el=`find /boot/efi -name elilo.efi`
1922	cp $el $mountpoint
1923	cp $liloconf $mountpoint
1924	if [ $mountefi -eq 1 ]; then
1925	umount /boot/efi 2>&1 > /dev/null
1926	fi
1927
1928	LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1929	cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1930	if [ "$?" -ne "0" ] ; then
1931	LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1932	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1933	LogIt " Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1934	rm -f $MINDI_TMP/mtpt.$$
1935	LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1936	retval=$(($retval+1))
1937	fi
1938	MakeMessageFile $mountpoint \| cut -c1-80 > $mountpoint/message.txt
1939
1940	mkdir -p $mountpoint/tmp
1941	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1942	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1943	fi
1944
1945	# copy the kernel across
1946	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1947	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1948	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
1949	cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1950	if [ "$?" -ne "0" ] ; then
1951	LogFile "INFO: Files at mountpoint ($mountpoint) :"
1952	du -sk $mountpoint/* >> $LOGFILE
1953	LogFile "--- end of list of files ---"
1954	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1955	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1956	cd "$old_pwd"
1957	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1958	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
1959	# losetup /dev/loop0 -d
1960	[ "$imagefile" != "" ] && rm -f $imagefile
1961	LogIt "ERROR: Sorry, your kernel is too big for your image"
1962	Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1963	return 0
1964	fi
1965	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
1966	LogFile "INFO: Free space left on image = $free_space KB"
1967	LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1968	# make it bootable
1969	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1970	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1971	if [ "$KERN_DISK_MADE" ] ; then
1972	LogFile "INFO: Not running LILO. It's not that kind of disk."
1973	fi
1974
1975	cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1976	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
1977	echo -en "..."
1978	rmdir $mountpoint \|\| LogIt "ERROR: Cannot rmdir (PBDI)"
1979	if [ "$retval" -eq "0" ] ; then
1980	echo -en "...$DONE\n"
1981	if [ "$KERN_DISK_MADE" ] ; then
1982	LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1983	fi
1984	else
1985	echo -en "...failed\n"
1986	LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1987	[ "$imagefile" != "" ] && rm -f $imagefile
1988	fi
1989	[ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1990	return $retval
1991	}
1992
1993
1994	PrepareBootDiskImage_ISOLINUX() {
1995	local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1996	imagesdir=$MINDI_CACHE
1997	kernelpath=$1
1998	do_boot_root_thingy=""
1999	retval=0
2000
2001	old_pwd=`pwd`
2002	[ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
2003	echo -en "Making "$BOOT_SIZE"KB boot disk..."
2004	TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath \| cut -f1` \|\| Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
2005	echo -en "..."
2006	imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
2007	mountpoint=$MINDI_TMP/mountpoint.$$
2008	mkdir -p $mountpoint
2009	dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null \|\| Die "Cannot dd blank file"
2010	LogFile "INFO: Creating vfat filesystem on $imagefile"
2011	mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
2012	# syslinux should be run on a local file (doen't work through NFS Cf: #297)
2013	syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
2014
2015	# Only move it now to its final destination and use it now
2016	mv $imagefile $imagesdir
2017	imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
2018
2019	mount -t vfat -o loop $imagefile $mountpoint \|\| LogIt "ERROR: Cannot mount (PBDI)"
2020
2021	# copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
2022	MakeMessageFile $mountpoint \| cut -c1-80 > $mountpoint/message.txt
2023	MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
2024	LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
2025	cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
2026	if [ "$?" -ne "0" ] ; then
2027	LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
2028	cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
2029	LogAll " Please unload some of your modules and try again."
2030	rm -f $MINDI_TMP/mtpt.$$
2031	LogAll " Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
2032	LogAll " Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2033	retval=$(($retval+1))
2034	fi
2035
2036	mkdir -p $mountpoint/tmp
2037	if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
2038	cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
2039	fi
2040
2041	# copy the kernel across
2042	[ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2043	dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2044	free_space=`df -k -P $mountpoint \| tail -n1 \| tr -s ' ' '\t' \| cut -f4`
2045
2046	retval=0
2047	cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2048	retval=$?
2049	if [ $KERNEL_IS_XEN = "yes" ]; then
2050	cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2051	let retval+=$?
2052	fi
2053
2054	if [ "$retval" -ne "0" ] ; then
2055	LogFile "INFO: Files at mountpoint ($mountpoint) :"
2056	du -sk $mountpoint/* >> $LOGFILE
2057	LogFile "--- end of list of files ---"
2058	echo -en "Kernel size = `du -sk $kernelpath \| cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2059	[ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2060	cd "$old_pwd"
2061	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
2062	rmdir $mountpoint \|\| LogAll "ERROR: Cannot rmdir (PBDI)"
2063
2064	LogIt "ERROR: Sorry, your kernel is too big for your image"
2065	Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2066	fi
2067	max_kernel_size=$(($free_space+`du -sk $kernelpath \| cut -f1`))
2068	LogFile "INFO: Free space left on image = $free_space KB"
2069	LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2070
2071	# make it bootable
2072	[ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2073	mkdir -p $mountpoint/etc
2074	[ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2075	umount $mountpoint \|\| Die "Cannot unmount mountpoint ($mountpoint)"
2076	echo -en "..."
2077	rmdir $mountpoint \|\| LogAll "ERROR: Cannot rmdir (PBDI)"
2078
2079	if [ "$retval" -eq "0" ] ; then
2080	echo -en "...$DONE\n"
2081	if [ "$KERN_DISK_MADE" ] ; then
2082	[ "$imagefile" != "" ] && rm -f $imagefile
2083	LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2084	fi
2085	else
2086	echo -en "...failed\n"
2087	LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2088	[ "$imagefile" != "" ] && rm -f $imagefile
2089	fi
2090	[ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2091	return $retval
2092	}
2093
2094
2095	ParseModprobeForIncludes() {
2096	local MODPROBE_CONF mpincfile includes include
2097
2098	MODPROBE_CONF=/etc/modprobe.conf
2099	mpincfile=$1
2100	touch $mpincfile
2101	if [ -a $MODPROBE_CONF ]; then
2102	includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF\|sort -u)
2103	if [ -n "$includes" ]; then
2104	for include in $includes
2105	do
2106	if [ -a "$include" ]; then
2107	echo $include >> $mpincfile
2108	fi
2109	done
2110	fi
2111	fi
2112	}
2113
2114
2115	PrepareDataDiskImages() {
2116	local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2117
2118	imagesdir=$MINDI_CACHE
2119	rm -f $imagesdir/mindi.iso
2120	needlist=$MINDI_TMP/what-we-need.txt
2121	bigdir=$MINDI_TMP/bigdir
2122	mkdir -p $bigdir/usr/bin
2123	mkdir -p $bigdir/usr/sbin
2124	includefile=$MINDI_TMP/$$.includefile.txt
2125
2126	# Check whether /lib64 or /lib is a link and if so explicitly create one in rootfs
2127	if [ -h "/lib64" ]; then
2128	mkdir -p lib \|\| LogIt "ERROR: Unable to create lib in $mountpoint."
2129	if [ ! -h lib64 ]; then
2130	ln -s lib lib64 \|\| LogIt "ERROR: /lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2131	fi
2132	fi
2133	if [ -h "/lib" ]; then
2134	mkdir -p usr/lib \|\| LogIt "ERROR: Unable to create usr/lib in $mountpoint."
2135	mv lib/* usr/lib 2> /dev/null
2136	if [ -d "lib" ]; then
2137	rmdir lib
2138	fi
2139	fi
2140	# Check whether /sbin and /bin are a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2141	if [ -h "/sbin" ]; then
2142	mkdir -p usr/sbin \|\| LogIt "ERROR: Unable to create usr/sbin in $mountpoint."
2143	mv sbin/* usr/sbin 2> /dev/null
2144	if [ -d "sbin" ]; then
2145	rmdir sbin
2146	fi
2147	fi
2148	if [ -h "/bin" ]; then
2149	mkdir -p usr/bin \|\| LogIt "ERROR: Unable to create usr/bin in $mountpoint."
2150	mv bin/* usr/bin 2> /dev/null
2151	if [ -d "bin" ]; then
2152	rmdir bin
2153	fi
2154	fi
2155
2156	lfiles=`ls $DEPLIST_DIR/* \| grep -v /minimal`
2157	if [ -e "$DEPLIST_FILE" ]; then
2158	lfiles="$DEPLIST_FILE $lfiles"
2159	fi
2160	lines=`grep -vx " #." $lfiles \| grep -vx "" \| wc -l`
2161	ParseModprobeForIncludes $includefile
2162	lines=$(($lines+`cat $includefile \| wc -l`))
2163	cat $lfiles $includefile \| GenerateGiantDependencyList $needlist $lines
2164	res=$?
2165	rm -f $includefile
2166	if [ "$YOUR_KERNEL_SUCKS" ]; then
2167	pwd=`pwd`
2168	cd "$MINDI_TMP"
2169	for i in `ListKernelModulePaths \| HackPathsToFailsafe` ; do
2170	tar cf - ./$i 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2171	done
2172	for i in $EXTRA_MODS ; do
2173	j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2174	[ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2175	for k in $j ; do
2176	tar cf - $k 2>> $MINDI_TMP/$$.log \| (cd "$bigdir" ; tar xf -) \|\| LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2177	LogFile "INFO: Added failsafe module $k to ramdisk"
2178	done
2179	done
2180	cd "$pwd"
2181	else
2182	ListKernelModulePaths >> $needlist
2183	fi
2184	if [ "$res" -ne "0" ] ; then
2185	Die "You have $res files present in dependency list\nbut absent from filesystem."
2186	fi
2187	mkdir -p $bigdir/tmp
2188	if [ _"$MONDO_SHARE" != _"" ]; then
2189	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2190	cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2191	fi
2192
2193	# Needs to be done after the MRCFG creation
2194	FindAndAddUserKeyboardMappingFile
2195
2196	[ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2197	DropOptimizedLibraries $needlist $bigdir
2198	echo -en "Assembling dependency files"
2199
2200	CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2201
2202	# also copy io.sys and msdos.sys, if we can find them
2203	for i in `mount \| cut -d' ' -f3` ; do
2204	for j in io.sys msdos.sys ; do
2205	[ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2206	done
2207	done
2208
2209	# master boot record, too
2210	i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2211	if [ "$i" ] ; then
2212	LogAll "INFO: Backing up $i's MBR"
2213	dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2214	sleep 1
2215	sync
2216	j=$i
2217	[ -h "$j" ] && j=`readlink -f $j`
2218	LogAll "INFO: Creating /dev/boot_device ($j)"
2219	mkdir -p $bigdir/dev
2220	cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE \|\| Die "Unable to create /dev/boot_device on ramdisk"
2221	fi
2222
2223	old_pwd=`pwd`
2224	cd "$bigdir"
2225
2226	# Get terminfo content
2227	ti="usr/share/terminfo/l"
2228	if [ -d /$ti ]; then
2229	mkdir -p $ti
2230	cp -Rdf /$ti/* $ti 2>> $LOGFILE \|\| LogAll "ERROR: issue copying terminfo"
2231	fi
2232	if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2233	cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2234	[ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2235	fi
2236	if [ -d "/lib/dev-state" ]; then
2237	tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2238	fi
2239	cd "$old_pwd"
2240	echo -e "$DONE"
2241	TOTAL_BIGDIR_SIZE=`du -sk $bigdir \| cut -f1`
2242	MakeMountlist $MINDI_TMP/mountlist.txt
2243	CheckMountlist $MINDI_TMP/mountlist.txt
2244	mkdir -p $bigdir/tmp
2245	cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE \|\| Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2246	if [ _"$MONDO_SHARE" != _"" ]; then
2247	cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2248	fi
2249	if [ $LVM != "false" ]; then
2250	$MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2251	if [ "$?" -ne "0" ]; then
2252	LVM="false"
2253	rm -f $bigdir/tmp/i-want-my-lvm
2254	else
2255	LogFile "Your i-want-my-lvm file content is:"
2256	LogFile "-----------------------------------"
2257	cat $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2258	LogFile "-----------------------------------"
2259	fi
2260	fi
2261	LogFile "Your mountlist.txt file content is:"
2262	LogFile "-----------------------------------"
2263	cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2264	LogFile "-----------------------------------"
2265
2266	echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2267	echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2268	if [ _"$MONDO_SHARE" != _"" ]; then
2269	for q in filelist.full.gz biggielist.txt ; do
2270	[ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2271	cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2272	done
2273	fi
2274
2275	echo -en "Tarring and zipping the data content..."
2276	size_of_all_tools=`du -sk $bigdir \| cut -f1`
2277	(cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log \| gzip -9 > $imagesdir/all.tar.gz \|\| LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2278	LogFile "Size of the data content"
2279	LogFile "------------------------"
2280	du -sk $imagesdir/*gz >> $LOGFILE
2281	LogFile "------------------------"
2282	echo -e "$DONE"
2283
2284	FRIENDLY_OUTSTRING="Boot and data disk images were created."
2285	rm -rf $bigdir
2286	rm -f $needlist
2287	}
2288
2289
2290	ProcessLDD() {
2291	local incoming f d nd bd bnd
2292	read incoming
2293	while [ "$incoming" != "" ]; do
2294	# We take the full path name of the dyn. lib. we want
2295	incoming=`echo "$incoming" \| $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2296	for f in $incoming ; do
2297	# echo modified file name if one of the parent dir is a link
2298	# by replacing the original dirname by the destination of the link
2299	d="`dirname $f`"
2300	found="false"
2301	while [ "$d" != "/" ]; do
2302	if [ -h "$d" ]; then
2303	nd=`readlink -f $d`
2304	bd=`basename $d`
2305	bnd=`basename $nd`
2306	f=`echo $f \| sed "s~/$bd/~/$bnd/~"`
2307	echo $d
2308	fi
2309	d="`dirname $d`"
2310	done
2311
2312	echo "$f"
2313	echo "`ReadAllLink $f`"
2314	done
2315	read incoming
2316	done
2317	}
2318
2319
2320	Prompt() {
2321	echo -en "$1"
2322	read line
2323	}
2324
2325
2326	ReadLine() {
2327	local i incoming
2328	read incoming
2329	i=0
2330	while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2331	i=$(($i+1))
2332	read incoming
2333	done
2334	echo "$incoming"
2335	}
2336
2337
2338	SizeOfPartition() {
2339	local devpath drive res stub
2340	device=$1
2341	if [ "`echo "$device" \| grep -E "^/dev/"`" = "" ] ; then
2342	Die "Cannot find $device's size - is your /etc/fstab sane?"
2343	fi
2344	if [ "`echo "$device" \| grep -F "/dev/md"`" != "" ] ; then
2345	res=`SizeOfRaidPartition $device`
2346	[ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2347	echo "$res"
2348	return 0
2349	fi
2350	# patch from Bill <bill@iwizard.biz> - 2003/08/25
2351	res=`$FDISK -s $device 2>> $LOGFILE`
2352	# end patch
2353	# take only the first in case of multiple mount (cifs, nfs, ...)
2354	[ "$res" = "" ] && res=`df -k -P -x supermount \| tr -s '\t' ' ' \| grep -F "$device " \| cut -d' ' -f2 \| head -1`
2355	[ "$res" = "" ] && res="-1"
2356	echo $res
2357	return 0
2358	}
2359
2360
2361	SizeOfRaidPartition() {
2362	local real_dev smallest_size silly tmp
2363
2364	silly=999999999
2365	smallest_size=$silly
2366
2367	for real_dev in `GetRaidDevMembers $1` ; do
2368	tmp=`SizeOfPartition $real_dev`
2369	[ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2370	done
2371
2372	if [ "$smallest_size" = "$silly" ] ; then
2373	echo "-1"
2374	return 1
2375	else
2376	echo "$smallest_size"
2377	return 0
2378	fi
2379	}
2380
2381
2382	StripExecutable()
2383	{
2384	local tmpfile
2385
2386	tmpfile=$MINDI_TMP/stripped.$$.dat
2387	[ -d "$1" ] \|\| [ -h "$1" ] && return
2388	cp -f $1 $tmpfile 2>> $LOGFILE
2389	strip $tmpfile 2> /dev/null
2390	if [ "$?" -eq "0" ] ; then
2391	cp -f $tmpfile $1 2>> $LOGFILE
2392	LogFile "INFO: Stripped binary $2"
2393	fi
2394	rm -f $tmpfile
2395	}
2396
2397	KernelVer() {
2398	local fkern_ver fname
2399
2400	fname=$1
2401	file $fname \| grep -q gzip
2402	if [ "$?" -eq "0" ] ; then
2403	# Used by ia64
2404	fkern_ver=`gzip -cd $fname \| strings 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2405	else
2406	fkern_ver=`strings $fname 2> /dev/null \| grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2407	fi
2408	echo "$fkern_ver"
2409	}
2410
2411
2412	# WARNING: This function should just echo the final result !!!
2413	#
2414	TryToFindKernelPath() {
2415	local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2416
2417	we_want_version=$KERVERRUN
2418	possible_kernels=""
2419	duff_kernels=""
2420	output=""
2421
2422	if [ "$ARCH" = "ia64" ] ; then
2423	root="/boot/efi/efi"
2424	else
2425	root="/"
2426	fi
2427	# See if we're booted from a Xen kernel
2428	# From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2429	if [ -f /proc/xen/capabilities ]; then
2430	# It's a Xen kernel
2431	KERNEL_IS_XEN="yes"
2432	LogFile "INFO: It's a Xen kernel..."
2433	fi
2434
2435	for fname in `find $root -maxdepth 2 -type f \| grep -Ei 'lin\|kern\|xen' \| grep -Ev '^/proc/\|^/net/\|^/mnt\|^/lib\|^/lib64\|^/bin\|^/sbin\|^/usr\|^/tmp'` ; do
2436	[ ! -e "$fname" ] && continue
2437	[ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2438	fkern_ver=`KernelVer $fname`
2439	[ "$fkern_ver" = "" ] && continue
2440	[ "`echo "$fkern_ver" \|grep -F "$we_want_version "`" = "" ] && continue
2441	[ -f "$fname" ] \|\| continue
2442	[ -h "$fname" ] && continue
2443	kdate=`uname -v \| $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' \| $AWK '{print $NF;}'`
2444	file $fname \| grep -q gzip
2445	if [ "$?" -eq "0" ] ; then
2446	# Used by ia64
2447	if [ "`gzip -cd $fname \| strings 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2448	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2449	duff_kernels="$fname $duff_kernels"
2450	else
2451	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2452	possible_kernels="$fname $possible_kernels"
2453	fi
2454	else
2455	if [ "`strings $fname 2> /dev/null \| grep -F "$kdate"`" = "" ] ; then
2456	LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2457	duff_kernels="$fname $duff_kernels"
2458	else
2459	[ "`echo "$fname" \| grep -F "vmlinux"`" ] && continue
2460	possible_kernels="$fname $possible_kernels"
2461	fi
2462	fi
2463	done
2464	if [ ! "$possible_kernels" ] && uname -a \| grep Knoppix > /dev/null ; then
2465	possible_kernels=`find /boot/vmlinuz-[23].* \| tail -n1`
2466	fi
2467	if [ ! "$possible_kernels" ] ; then
2468	LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2469	possible_kernels="$duff_kernels"
2470	if [ ! "$possible_kernels" ] ; then
2471	LogAll "INFO: Sorry, no duff kernels either"
2472	else
2473	LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2474	LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2475	fi
2476	fi
2477	if [ $KERNEL_IS_XEN = "yes" ]; then
2478	possible_xenkernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -i "xen" \| sort -u \| tr '\n' ' '`
2479	noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2480	fi
2481	possible_kernels=`echo "$possible_kernels" \| tr -s ' ' '\n' \| grep -vi "xen" \| sort -u \| tr '\n' ' '`
2482	noof_kernels=`CountItemsIn "$possible_kernels"`
2483	if [ "$noof_kernels" -eq "0" ] ; then
2484	LogAll "Could not find your kernel."
2485	if [ -e "/boot/vmlinuz" ] ; then
2486	LogAll "INFO: Using /boot/vmlinuz as a last resort."
2487	output=/boot/vmlinuz
2488	else
2489	output=""
2490	fi
2491	elif [ "$noof_kernels" -eq "1" ] ; then
2492	kp=`echo "$possible_kernels" \| sed s/' '//`
2493	LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2494	output="$kp"
2495	else
2496	for i in $possible_kernels ; do
2497	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
2498	LogAll "INFO: OK, I used my initiative and found that "
2499	LogAll "INFO: $i is probably your kernel. "
2500	output="$i"
2501	break
2502	fi
2503	done
2504	if [ ! -n "$output" ]; then
2505	if [ "`echo " $possible_kernels " \| grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2506	output=/boot/vmlinuz
2507	LogFile "INFO: Schlomo, this one's for you."
2508	else
2509	LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2510	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2511	LogFile "INFO: $possible_kernels"
2512	output=""
2513	fi
2514	fi
2515	fi
2516	if [ $KERNEL_IS_XEN = "yes" ]; then
2517	if [ "$noof_xenkernels" -eq "0" ]; then
2518	xenkernelpath=""
2519	elif [ "$noof_xenkernels" -eq "1" ]; then
2520	xenkernelpath=`echo "$possible_xenkernels" \| sed s/' '//`
2521	LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2522	else
2523	for i in $possible_xenkernels ; do
2524	if [ "`echo $i \| grep "$KERVERRUN"`" ]; then
2525	LogFile "INFO: OK, I used my initiative and found that "
2526	LogFile "INFO: $i is probably your Xen kernel. "
2527	xenkernelpath="$i"
2528	break
2529	fi
2530	done
2531	if [ ! -n "$xenkernelpath" ]; then
2532	new_possible_xenkernels=`echo "$possible_xenkernels" \| tr -s ' ' '\n' \| grep -E "^/boot" \| sort -u \| tr '\n' ' '`
2533	if [ ! -n "$new_possible_xenkernels" ]; then
2534	xenkernelpath=`echo $new_possible_xenkernels \| tr -s ' ' '\n' \| head -1`
2535	LogFile "INFO: Using $xenkernelpath"
2536	else
2537	LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2538	LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2539	LogFile "INFO: $possible_xenkernels"
2540	output=""
2541	xenkernelpath=`echo $possible_xenkernels \| tr -s ' ' '\n' \| head -1`
2542	LogFile "INFO: Using $xenkernelpath"
2543	fi
2544	fi
2545	fi
2546	if [[ -z "$xenkernelpath" \|\| ! -f "$xenkernelpath" ]]; then
2547	Die "Cannot find Xen kernel $xenkernelpath, aborting"
2548	fi
2549	fi
2550	LogAll "TryToFindKernelPath found $output"
2551	echo "$output"
2552	}
2553
2554
2555	TurnTgzIntoRdz() {
2556	local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2557
2558	tgz_dir_fname=$1
2559	rdz_fname=$2
2560	kernelsize=$3
2561	maxsize=$(($BOOT_SIZE-$kernelsize))
2562	maxsize=$(($maxsize*2)); # to allow for compression of 50%
2563	tempfile=$MINDI_TMP/temp.rd
2564	mountpoint=$MINDI_TMP/mnt1
2565	res=0
2566	echo -en "..."
2567	dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null \|\| Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2568	echo -en "..."
2569	LogFile "INFO: Creating ext2 filesystem on $tempfile"
2570	mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE \|\| Die "Unable to create an ext2 file system on $tempfile"
2571	echo -en "..."
2572	mkdir -p $mountpoint
2573	mount -t ext2 -o loop $tempfile $mountpoint \|\| Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2574	echo -en "..."
2575	old_pwd=`pwd`
2576	cd "$mountpoint"
2577
2578	# Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2579	for d in bin sbin lib lib64; do
2580	if [ -h "/$d" ]; then
2581	thelink=`readlink /$d`
2582	mkdir -p $mountpoint/$thelink \|\| LogIt "ERROR: Unable to create $thelink in $mountpoint."
2583	mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2584	if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2585	rmdir $mountpoint/$d
2586	fi
2587	if [ ! -h $mountpoint/$d ]; then
2588	rm -f $mountpoint/$d 2> /dev/null
2589	(cd $mountpoint ; ln -s $thelink $d) \|\| LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2590	fi
2591	fi
2592	done
2593
2594	LogFile "INFO: what is now in $mountpoint"
2595	ls -alR $mountpoint >> $LOGFILE
2596
2597	# Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2598	# copy from rootfs into mountpoint
2599	for f in $tgz_dir_fname/*; do
2600	if [ ! -r $f ]; then
2601	Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2602	else
2603	cp -Rdf $f . 2>&1 >> $LOGFILE
2604	fi
2605	done
2606	(cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../sbin/init linuxrc)
2607	ln -sf sbin/init linuxrc
2608	tar -zxf symlinks.tgz \|\| Die "Cannot untar symlinks.tgz"
2609
2610	cd dev \|\| Die "Can't cd to dev"
2611	tar -zxf dev-entries.tgz \|\| Die "Cannot untar dev-entries.tgz"
2612	rm -f dev-entries.tgz
2613	cd ..
2614
2615	for w in insmod.static insmod.static.old ; do
2616	s=`which $w 2> /dev/null`
2617	if [ -e "$s" ] ; then
2618	tar cf - -C / $s 2> /dev/null \| tar xf -
2619	fi
2620	done
2621
2622	[ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2623
2624	# Copy of files mandatory for ssh to automate mount if sshfs is used
2625	mkdir -p $mountpoint/.ssh $mountpoint/tmp
2626	cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2627	cat > $mountpoint/tmp/myssh << EOF
2628	ssh -o StrictHostKeyChecking=no $*
2629	EOF
2630	chmod 755 $mountpoint/tmp/myssh
2631
2632	# Copy of files mandatory for ld.so
2633	cp -a /etc/ld.so.c* $mountpoint/etc
2634
2635	# Handle the case where busybox and mount are dynamically linked
2636	file $MINDI_LIB/rootfs/bin/busybox 2>&1 \| grep -q "dynamically"
2637	if [ $? -eq 0 ]; then
2638	# We want to use the real mount and all the supported variants (nfs, cifs, ...)
2639	rm -f bin/mount
2640	fi
2641
2642	# Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2643	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2644	for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf \| grep -vE " #.\|^#" \| sort -u` ; do
2645	if [ -d $f ]; then
2646	for g in `find $f`; do
2647	echo $g >> $MINDI_TMP/minimal.lis
2648	LocateDeps $g >> $MINDI_TMP/minimal2.lis
2649	done
2650	else
2651	if [ -r $f ]; then
2652	echo $f >> $MINDI_TMP/minimal.lis
2653	LocateDeps $f >> $MINDI_TMP/minimal2.lis
2654	fi
2655	fi
2656	done
2657	for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2658	ReadAllLink $f >> $MINDI_TMP/minimal.lis
2659	done
2660	# Initial / are trucated by tar
2661	finallist=""
2662	# Remove directories from the list, as tar will create them anyway
2663	# and it may hurt if /lib is in it as on Debian/Ubuntu
2664	# recent bash says that -d is true for a link to a dir !
2665	for f in `sort -u $MINDI_TMP/minimal.lis`; do
2666	if [ -e $f -a ! -d $f ] \|\| [ -h $f -a ! -d $f ]; then
2667	finallist="$finallist $f"
2668	fi
2669	done
2670	tar cf - $finallist 2>> $MINDI_TMP/$$.log \| tar xUf - \|\| LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2671
2672	# To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2673	ln -sf /bin/bash bin/sh
2674	LogIt "INFO: Using bash as default shell"
2675	rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2676
2677	# Avoids an issue on some distro (RHEL5)
2678	rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2679
2680	mkdir -p $mountpoint/tmp
2681	# Management of udev (which includes modprobe in rules)
2682	ps auxww \| grep -v grep \| grep -qw udevd
2683	if [ $? -eq 0 ]; then
2684	echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2685	LogIt "INFO: udev device manager found"
2686	tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2687	# This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2688	rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2689	# Do not do it if it's a link (Ubuntu 64 bits #503)
2690	if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2691	tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2692	fi
2693	if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [ ! -h "/lib32/udev" ]; then
2694	tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2695	fi
2696	if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [ ! -h "/lib/udev" ]; then
2697	tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2698	fi
2699	if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [ ! -h "/usr/lib/udev" ]; then
2700	tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2701	fi
2702	if [ -x /sbin/udevd ] \|\| [ -x /usr/bin/udevd ] \|\| [ -x /usr/lib/systemd/systemd-udevd ]; then
2703	lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2704	lis=""
2705	# Get only the files which exist in that list
2706	# and potentially their symlink structure
2707	for i in $lis2; do
2708	if [ -h $i ]; then
2709	j=$i
2710	while [ -h $j ]; do
2711	lis="$lis $j"
2712	j=`readlink -f $j`
2713	done
2714	lis="$lis $j"
2715	elif [ -f $i ]; then
2716	lis="$lis $i"
2717	fi
2718	done
2719	# And their deps
2720	LocateDeps $lis > $MINDI_TMP/udev.lis
2721	for i in $lis; do
2722	if [ "`echo $i \| cut -c1`" = "/" ]; then
2723	j=`echo $i \| cut -c2-`
2724	[ "$j" != "" ] && rm -f $j
2725	fi
2726	echo "$i" >> $MINDI_TMP/udev.lis
2727	done
2728	tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2729	rm -f $MINDI_TMP/udev.lis
2730	else
2731	LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2732	LogAll " mindi will use static devices which may cause problems"
2733	rm -f $mountpoint/tmp/USE-UDEV
2734	fi
2735	fi
2736
2737	# Management of potential HW info (ProLiant only at the moment)
2738	rm -rf $MINDI_CACHE/bkphw
2739	mindi-bkphw $MINDI_CACHE $MINDI_CONF \| tee -a $LOGFILE
2740	if [ -d $MINDI_CACHE/bkphw ]; then
2741	LogIt "INFO: Hardware Information found and saved ..."
2742	cp -rp $MINDI_CACHE/bkphw .
2743	if [ -f $MINDI_CACHE/tools.files ]; then
2744	lis=`grep -Ev '^#' $MINDI_CACHE/tools.files`
2745	LocateDeps $lis > $MINDI_TMP/tools.lis
2746	tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2747	fi
2748	if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2749	mv -f $MINDI_CACHE/mindi-rsthw .
2750	chmod 755 ./mindi-rsthw
2751	fi
2752	rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2753	fi
2754
2755	# Management of perl scripts delivered needed at restore time
2756	mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2757	tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2758
2759	for w in cdrom groovy-stuff ; do
2760	mkdir -p mnt/$w
2761	done
2762
2763	tar cf - -C / /dev/fd0[1,2][4,7,8] 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2764
2765	cd "$old_pwd"
2766	echo -en "..."
2767	if [ "$YOUR_KERNEL_SUCKS" ] ; then
2768	cd "$MINDI_TMP"
2769	needed_modules_path=lib/modules/$FAILSAFE_KVER
2770	else
2771	cd /
2772	if [ "${kernelname}" != "" ]
2773	then
2774	needed_modules_path=lib/modules/${kernelname}
2775	else
2776	needed_modules_path=lib/modules/$KERVERRUN
2777	fi
2778	fi
2779
2780	needed_modules=""
2781	list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2782
2783	if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2784	# For PXE boot
2785	list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2786	fi
2787	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2788	list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2789	fi
2790	for i in $DENY_MODS; do
2791	LogFile "INFO: Removing $i from the list of modules to load"
2792	list_of_groovy_mods=`echo ${list_of_groovy_mods} \| tr ' ' '\n' \| grep -Ev "^${i}$" \| tr '\n' ' '`
2793	done
2794
2795	[ -e "$needed_modules_path" ] \|\| LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2796	for i in $list_of_groovy_mods ; do
2797	needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2798	done
2799
2800	for i in `echo $needed_modules \| tr ' ' '\n' \| sort -u`; do
2801	[ -e "$i" ] && s=`du -sk $i \| cut -f1` \|\| s=""
2802	[ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2803	LogFile "INFO: Adding $i ($s KB) to the rootfs"
2804	tar cf - -C / $i 2>> $MINDI_TMP/$$.log \| (cd "$mountpoint" ; tar xf -) \|\| LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2805	# Uncompress modules if not using udev and native modprobe
2806	if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2807	if [ "`echo "$i" \| grep -F ".gz"`" ]; then
2808	LogFile "INFO: Uncompressing $i"
2809	gunzip -f $mountpoint/$i
2810	fi
2811	fi
2812	if [ -L $mountpoint/$i ] && [ `echo "$i" \| grep "\.ko$"` ]; then
2813	echo "Replacing module symlink ($i) with actual file"
2814	rm -f $mountpoint/$i
2815	cp -Lf $i $mountpoint/$i
2816	ls -l $mountpoint/$i
2817	fi
2818	done
2819
2820	# Also copy modules.* in case of udev so that normal modprobe works
2821	tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log \| (cd "$mountpoint" ; tar xf -) \|\| LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2822
2823	# Copy FW in case some drivers needs it
2824	for d in "/lib" "/usr/lib"; do
2825	if [ -d "$d/firmware" -a ! -h $d ]; then
2826	cp -a "$d/firmware" "$mountpoint/$d"
2827	fi
2828	done
2829
2830	# Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2831	for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2832	if [ -d "$d/multipath" -a ! -h $d ]; then
2833	cp -a "$d/multipath" "$mountpoint/$d"
2834	fi
2835	done
2836
2837	# Copy an additional ProLiant tool for OBDR support
2838	if [ -f $MINDI_TMP/OBDR ]; then
2839	found=0
2840	if [ -x /usr/bin/hpsa_obdr_mode ]; then
2841	mkdir -p $mountpoint/usr/bin
2842	cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2843	LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2844	found=1
2845	fi
2846	if [ -x /usr/bin/sg_wr_mode ]; then
2847	mkdir -p $mountpoint/usr/bin
2848	lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2849	LocateDeps $lis > $MINDI_TMP/obdr.lis
2850	(cd $mountpoint ; tar cf - $lis -C / `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log \| tar xf - \|\| LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2851	LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2852	found=1
2853	fi
2854	if [ $found -eq 0 ]; then
2855	LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2856	LogAll " This may lead to a tape not going back to sequential mode after OBDR boot"
2857	fi
2858	fi
2859
2860	if [ ! -e "/sbin/devfsd" ] \|\| [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2861	LogFile "INFO: Deleting devfsd daemon from ramdisk"
2862	[ ! -e "/sbin/devfsd" ] && LogFile " ...because /sbin/devfsd not found"
2863	[ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile " ...because kernel is failsafe"
2864	rm -f $mountpoint/sbin/devfsd
2865	fi
2866	cd "$old_pwd"
2867	[ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2868	if [ _"$MONDO_SHARE" != _"" ]; then
2869	MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2870	cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE \|\| Die "Cannot copy mondo-restore.cfg to ramdisk"
2871	cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE \|\| Die "Cannot copy mountlist to ramdisk"
2872	echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2873	echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2874	[ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2875	[ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2876	[ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2877	[ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2878	fi
2879	mkdir -p $mountpoint/proc
2880	LogFile "---------------------------"
2881	LogFile "Content of initial ramdisk:"
2882	LogFile "---------------------------"
2883	(cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2884	LogFile "---------------------------"
2885
2886	# Determine what filesystem to use for initrd image
2887	LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2888	gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2889	[ -z gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2890	if [ "$gvFileSystem" = "ext2fs" ] \|\| [ "$gvFileSystem" = "ext3fs" ] \|\| [ "$gvFileSystem" = "ext4fs" ]; then
2891	# say what will be used
2892	LogFile "INFO: Creating an $gvFileSystem initrd image..."
2893	# kernel expects linuxrc in ext2 filesystem
2894	( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2895	# unmount loop filesystem and create image file using the standard approach
2896	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2897	dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2898	if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2899	bs=`/sbin/tune4fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
2900	else
2901	bs=`tune2fs -l ${rdz_fname}.tmp \| grep -E '^Block size:' \| cut -d: -f2 \| sed 's/^ *//'`
2902	fi
2903	MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2904	gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2905	rm -f ${rdz_fname}.tmp
2906	# log that we are done
2907	LogFile " ...done."
2908	elif [ "$gvFileSystem" = "initramfs" ]; then
2909	# say what will be used
2910	LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2911	# make sure that cpio is there
2912	which cpio &> /dev/null; [ $? -eq 0 ] \|\| Die "cpio not found. Please install package cpio and try again."
2913	# go into filesystem
2914	cd "$mountpoint"
2915	# kernel expects init in cpio filesystem
2916	ln -sf sbin/init init
2917	# create cpio image file and unmount loop filesystem
2918	find . -print \| cpio -o -H newc \| gzip -9 > $rdz_fname 2> /dev/null
2919	cd "$old_pwd"
2920	umount $mountpoint \|\| Die "Cannot unmount $tempfile"
2921	# log that we are done
2922	LogFile " ...done."
2923	else
2924	Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2925	fi
2926
2927	if [ "$res" -eq "0" ] ; then
2928	echo -en "..."
2929	else
2930	echo -en "\rMade an rdz WITH ERRORS. \n"
2931	fi
2932	return 0
2933	}
2934
2935
2936	##############################################################################
2937	#----------------------------------- Main -----------------------------------#
2938	##############################################################################
2939
2940	# Now we can create what we need
2941	mkdir -p $MINDI_TMP
2942
2943	# Purge from potential old run
2944	if [ _"$MINDI_CACHE" = _"" ]; then
2945	Die "MINDI_CACHE undefined"
2946	fi
2947
2948	# --nolog needs to be first, and is used in analyze-my-lvm
2949	if [ "$1" = "--nolog" ] ; then
2950	shift
2951	LOGFILE=/dev/stderr
2952	else
2953	> $LOGFILE
2954	fi
2955	if [ "$1" = "--printvar" ] ; then
2956	shift
2957	if [ _"$1" != _"" ] ; then
2958	set \| grep -Ew "^$1" \| cut -d= -f2
2959	fi
2960	exit 0
2961	fi
2962
2963	LogFile "mindi v$MINDI_VERSION"
2964	LogFile "$ARCH architecture detected"
2965	LogFile "mindi called with the following arguments:"
2966	echo "$@">> $LOGFILE
2967	LogFile "Start date : `date`"
2968	LogFile "-----------------------------"
2969
2970	[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2971
2972	# Log some capital variables
2973	[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2974	[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2975	LogFile "MONDO_SHARE = $MONDO_SHARE"
2976	LogFile "MINDI_LIB = $MINDI_LIB"
2977	LogFile "MINDI_SBIN = $MINDI_SBIN"
2978	LogFile "MINDI_CONF = $MINDI_CONF"
2979	if [ -f $MINDI_CONFIG ]; then
2980	LogFile "-----------------------------"
2981	LogFile " Mindi configuration file "
2982	LogFile "-----------------------------"
2983	grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2984	LogFile "-----------------------------"
2985	fi
2986	LogFile "In Mindi"
2987	LogFile "--------"
2988	LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2989	LogFile "BOOT_SIZE = $BOOT_SIZE"
2990	LogFile "--------"
2991
2992	trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2993
2994	# Sanity checks
2995	which which > /dev/null 2> /dev/null \|\| Die "Please install 'which'."
2996	which strings > /dev/null 2> /dev/null \|\| Die "Please install binutils and libbinutils; you have no 'strings' executable."
2997	which gawk > /dev/null 2> /dev/null \|\| Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2998	which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` \|\| AWK="`which awk 2>/dev/null`"
2999	if which awk &> /dev/null ; then
3000	if ! which gawk &> /dev/null ; then
3001	LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3002	fi
3003	fi
3004	which mke2fs > /dev/null 2> /dev/null \|\| Die "Please put mke2fs in system path"
3005	[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3006
3007	[ "`echo $KERVERRUN \| grep -E "2\.4\.[0-6]" \| grep -vE "2\.4\.[0-9][0-9]"`" != "" ] && echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3008
3009	# Update the PATH variable if incomplete
3010	if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3011	PATH=$PATH:/sbin:/usr/sbin
3012	export PATH
3013	LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3014	LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3015	LogFile "INFO: Or you might like to call 'su -' instead of 'su', for example."
3016	fi
3017
3018	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3019	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
3020	source $MINDI_LIB/FindDistroFailsafe
3021	# Log kernel image
3022	LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3023	else
3024	[ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null \| grep -E "2\.[46]" \| cut -d' ' -f1`
3025	fi
3026
3027	if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3028	Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3029	fi
3030
3031	### TODO
3032	### Fix as it's not mandatory on ia64
3033	if [ "$ARCH" = "ia64" ] ; then
3034	if which elilo &> /dev/null ; then
3035	LILO_EXE=elilo
3036	else
3037	LILO_EXE=`which false 2> /dev/null`
3038	fi
3039	else
3040	FindIsolinuxBinary
3041	fi
3042	trap "Aborted" SIGTERM
3043	DONE="\r\t\t\t\t\t\t\t\tDone. "
3044	kernelpath=""
3045	MONDO_ROOT=/var/cache/mondo
3046	mkdir -p $MONDO_ROOT
3047
3048	if [ -d "/proc/lvm" ]; then
3049	# LVM v1
3050	LVMCMD=""
3051	LVM="v1"
3052	elif [ -d "/dev/mapper" ]; then
3053	# LVM v2
3054	LVMCMD="lvm"
3055	LVM="v2"
3056	else
3057	LVM="false"
3058	fi
3059
3060	if [ -e "/proc/cmdline" ]; then
3061	CMDLINE="/proc/cmdline"
3062	elif [ -e "/tmp/cmdline" ]; then
3063	CMDLINE="/tmp/cmdline"
3064	else
3065	CMDLINE="/dev/null"
3066	fi
3067
3068	LogFile "INFO: LVM set to $LVM"
3069	LogFile "----------"
3070	LogFile "mount result:"
3071	LogFile "-------------"
3072	mount >> $LOGFILE
3073	if [ -e /etc/raidtab ]; then
3074	LogFile "-------------"
3075	LogFile "/etc/raidtab content:"
3076	LogFile "-------------"
3077	cat /etc/raidtab >> $LOGFILE
3078	else
3079	LogFile "No file /etc/raidtab"
3080	fi
3081	if [ -e /etc/mdadm.conf ]; then
3082	LogFile "-------------"
3083	LogFile "/etc/mdadm.conf content:"
3084	LogFile "-------------"
3085	cat /etc/mdadm.conf >> $LOGFILE
3086	else
3087	LogFile "-------------"
3088	LogFile "No file /etc/mdadm.conf"
3089	fi
3090	LogFile "-------------"
3091	LogFile "cat $CMDLINE"
3092	LogFile "-------------"
3093	cat $CMDLINE >> $LOGFILE
3094	LogFile "-------------"
3095	LogFile "cat /proc/swaps:"
3096	LogFile "-------------"
3097	cat /proc/swaps >> $LOGFILE
3098	LogFile "-------------"
3099	if [ -e /proc/mdstat ]; then
3100	LogFile "cat /proc/mdstat:"
3101	LogFile "-------------"
3102	cat /proc/mdstat >> $LOGFILE
3103	else
3104	LogFile "No pseudo file /proc/mdstat"
3105	fi
3106	LogFile "-------------"
3107	LogFile "cat /proc/partitions:"
3108	LogFile "-------------"
3109	cat /proc/partitions >> $LOGFILE
3110	LogFile "-------------"
3111	LogFile "cat /proc/filesystems:"
3112	LogFile "-------------"
3113	cat /proc/filesystems >> $LOGFILE
3114	LogFile "-------------"
3115	LogFile "lsmod result:"
3116	LogFile "-------------"
3117	lsmod >> $LOGFILE
3118	MODULES="`cat /proc/modules \| $AWK '{print $1}'`"
3119	if [ -x /usr/sbin/esxcfg-module ]; then
3120	LogFile "-------------"
3121	LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3122	LogFile "-------------"
3123	LogFile "VMWare modules"
3124	LogFile "-------------"
3125	/usr/sbin/esxcfg-module -l >> $LOGFILE
3126	MODULES="$MODULES `/usr/sbin/esxcfg-module -l \| $AWK '{print $1}'`"
3127	fi
3128	LogFile "-------------"
3129	LogFile "FORCE_MODS:"
3130	LogFile "-------------"
3131	LogFile "$FORCE_MODS"
3132	LogFile "-------------"
3133	LogFile "DENY_MODS:"
3134	LogFile "-------------"
3135	LogFile "$DENY_MODS"
3136	LogFile "-------------"
3137	LogFile "df result:"
3138	LogFile "----------"
3139	df -aT >> $LOGFILE
3140	LogFile "-------------"
3141	LogFile "df -i result:"
3142	LogFile "----------"
3143	df -i >> $LOGFILE
3144	LogFile "-------------"
3145	if [ -r /boot/grub/menu.lst ]; then
3146	LogFile "-------------"
3147	LogFile "INFO: /boot/grub/menu.lst content"
3148	LogFile "-------------"
3149	cat /boot/grub/menu.lst >> $LOGFILE
3150	LogFile "-------------"
3151	fi
3152	if [ -r /boot/grub/grub.conf ]; then
3153	LogFile "-------------"
3154	LogFile "INFO: /boot/grub/grub.conf content"
3155	LogFile "-------------"
3156	cat /boot/grub/grub.conf >> $LOGFILE
3157	LogFile "-------------"
3158	fi
3159	if [ -r /boot/grub/grub.cfg ]; then
3160	LogFile "-------------"
3161	LogFile "INFO: /boot/grub/grub.cfg content"
3162	LogFile "-------------"
3163	cat /boot/grub/grub.cfg >> $LOGFILE
3164	LogFile "-------------"
3165	fi
3166	if [ -r /boot/grub/device.map ]; then
3167	LogFile "-------------"
3168	LogFile "INFO: /boot/grub/device.map content"
3169	LogFile "-------------"
3170	cat /boot/grub/device.map >> $LOGFILE
3171	LogFile "-------------"
3172	fi
3173	if [ -r /etc/lilo.conf ]; then
3174	LogFile "-------------"
3175	LogFile "INFO: /etc/lilo.conf content"
3176	LogFile "-------------"
3177	cat /etc/lilo.conf >> $LOGFILE
3178	fi
3179	LogFile "Full fdisk info"
3180	LogFile "---------------"
3181	$FDISK -l >> $LOGFILE
3182	LogFile "----------------"
3183	LogFile "List of extra modules is:"
3184	LogFile "$EXTRA_MODS"
3185	LogFile "-------------"
3186
3187	# Compute libata version
3188	laver=`modinfo libata 2> /dev/null \| grep -Ei '^Version:' \| cut -d: -f2 \| cut -d. -f1 \| sed 's/ *//g' 2> /dev/null`
3189	# If libata v2 is used then remove ide-generic as it will perturbate boot
3190	if [ "`echo $MODULES \| grep libata`" ]; then
3191	if [ "$laver" = "2" ]; then
3192	DENY_MODS="$DENY_MODS ide-generic"
3193	LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3194	LogFile "-------------"
3195	fi
3196	fi
3197
3198	# Check for McAfee which disturbs the access to some files (tgz in articular)
3199	if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3200	LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3201	LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3202	LogFile "WARNING: You have two options:"
3203	LogFile "WARNING: - Exclude all directories with special files (check McAfee System Events Log)"
3204	LogFile "WARNING: - Disable the scanner during the backup"
3205	fi
3206
3207	# Check for ISO_CMD command
3208	if [ ! -x $ISO_CMD ]; then
3209	LogFile "NOTE: No CD image (ISO file) utility found"
3210	fi
3211
3212	FLOPPY_WAS_MOUNTED=""
3213	for mtpt in /media/floppy /mnt/floppy /floppy ; do
3214	if mount \| grep -w $mtpt &> /dev/null ; then
3215	FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3216	umount $mtpt
3217	fi
3218	done
3219
3220	#
3221	# If we have a USB device we need to store info
3222	# and remove it from the parameters line
3223	#
3224	if [ "$#" -ne "0" ] ; then
3225	if [ "$1" = "--usb" ] ; then
3226	shift
3227	USBDEVICE=$1
3228	if [ _"$USBDEVICE" = _"" ]; then
3229	Die "No USB device specified"
3230	fi
3231	shift
3232	fi
3233	fi
3234
3235	if [ "$#" -ne "0" ] ; then
3236	if [ "$1" = "--findkernel" ] ; then
3237	resk=`TryToFindKernelPath`
3238	# Avoids logfile content for mondo
3239	export MONDO_SHARE=""
3240	if [ "$resk" = "" ] ; then
3241	if [ $KERNEL_IS_XEN = "yes" ]; then
3242	echo "$xenkernelpath"
3243	LogFile "INFO: xenkernelpath = $xenkernelpath"
3244	MindiExit 0
3245	else
3246	MindiExit -1
3247	fi
3248	else
3249	echo "$resk"
3250	LogFile "INFO: kernelpath = $resk"
3251	MindiExit 0
3252	fi
3253	elif [ "$1" = "--locatedeps" ] ; then
3254	[ ! "$2" ] && Die "Please specify the binary to look at"
3255	LocateDeps $*
3256	# Avoids logfile content for mondo
3257	export MONDO_SHARE=""
3258	MindiExit $?
3259	elif [ "$1" = "--readalllink" ] ; then
3260	[ ! "$2" ] && Die "Please specify the binary to look at"
3261	# Avoids logfile content for mondo
3262	export MONDO_SHARE=""
3263	ReadAllLink $2
3264	MindiExit $?
3265	elif [ "$1" = "--makemessage" ] ; then
3266	MakeMessageFile \| cut -c1-80
3267	MindiExit 0
3268	elif [ "$1" = "--makemountlist" ] ; then
3269	[ ! "$2" ] && Die "Please specify the output file"
3270	MakeMountlist $2
3271	CheckMountlist $2
3272	# Avoids logfile content for mondo
3273	export MONDO_SHARE=""
3274	MindiExit $?
3275	elif [ "$1" = "-V" ] \|\| [ "$1" = "-v" ] \|\| [ "$1" = "--version" ] \|\| [ "$1" = "-version" ] ; then
3276	echo "Mindi v$MINDI_VERSION"
3277	# Avoids logfile content for mondo
3278	export MONDO_SHARE=""
3279	MindiExit 0
3280	elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3281	MONDO_TMP=$2
3282	# Change MINDI_TMP for the one provided by mondo
3283	# So that it can get back the built files
3284	if [ _"$MONDO_TMP" = _"" ]; then
3285	Die "MONDO_TMP is empty, aborting"
3286	fi
3287	if [ _"$MONDO_TMP" = _"/" ]; then
3288	Die "MONDO_TMP is /, aborting"
3289	fi
3290	mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3291	rmdir $MINDI_TMP
3292	export MINDI_TMP=$MONDO_TMP
3293	mkdir -p $MINDI_TMP
3294
3295	# This is the scratch dir in mondo - subdir images
3296	MINDI_CACHE=$3
3297
3298	kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3299	[ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3300
3301	###
3302	### Sq-Modification...
3303	### Attempt to locate kernel specific module path
3304	### if module path is found then use it other wise use uname -r to set it...
3305	###
3306	if [ $KERNEL_IS_XEN = "yes" ]; then
3307	LogAll "INFO: xenkernelpath = $xenkernelpath"
3308	fi
3309	kernelname=`echo $kernelpath \| cut -d'-' -f2- \| sed 's/.[bg]z[2]*$//'`
3310	if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3311	then
3312	LogAll "WARNING: Module path for ${kernelpath} not found..."
3313	LogAll " using running kernel\'s modules."
3314	kernelname=$KERVERRUN
3315	else
3316	LogAll "Using modules for kernel: ${kernelname}"
3317	fi
3318	LogAll "INFO: kernelname = $kernelname"
3319	LogAll "INFO: kernelpath = $kernelpath"
3320	###
3321	### end of Sq-Modification
3322	###
3323	TAPEDEV=$5
3324	TAPESIZE=$6
3325	FILES_IN_FILELIST=$7
3326	USE_LZO=$8
3327	CDRECOVERY=$9
3328	if [ "${10}" = "(null)" ] \|\| [ "${10}" = "" ] ; then
3329	IMAGE_DEVS=""
3330	else
3331	IMAGE_DEVS="`echo "${10}" \| tr '\|' ' '`"
3332	fi
3333	if [ "${11}" ] ; then
3334	LILO_OPTIONS=""
3335	# LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3336	fi
3337	LAST_FILELIST_NUMBER=${12}
3338	ESTIMATED_TOTAL_NOOF_SLICES=${13}
3339	export MINDI_EXCLUDE_DEVS="${14}"
3340	USE_COMP="${15}"
3341	USE_LILO="${16}"
3342	USE_STAR="${17}"
3343	INTERNAL_TAPE_BLOCK_SIZE="${18}"
3344	DIFFERENTIAL="${19}"
3345	USE_GZIP="${20}"
3346	NOT_BOOT="${21}"
3347	[ "$USE_COMP" = "" ] && USE_COMP=yes
3348	[ "$USE_GZIP" = "" ] && USE_GZIP=no
3349	[ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3350	[ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3351	# MONDO_ROOT is the real scratchdir
3352	MONDO_ROOT=`echo $MINDI_CACHE \| sed 's/\(.\)\/./\1/'`
3353	if [ _"$MONDO_ROOT" != _"" ]; then
3354	mkdir -p $MONDO_ROOT
3355	else
3356	Die "MONDO_ROOT is undefined"
3357	fi
3358	else
3359	LogScreen "Syntax: mindi (--custom ....)"
3360	MindiExit -1
3361	fi
3362	fi
3363
3364	if [ _"$MINDI_CACHE" != _"" ]; then
3365	rm -rf $MINDI_CACHE/* 2> /dev/null
3366	mkdir -p $MINDI_CACHE
3367	fi
3368
3369	[ "$CDRECOVERY" = "yes" ] \|\| CDRECOVERY=no
3370
3371	if [ _"$MONDO_SHARE" = _"" ]; then
3372	LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3373	LogIt "Latest Mindi is available from http://www.mondorescue.org"
3374	LogIt "BusyBox sources are available from http://www.busybox.net"
3375	LogIt "------------------------------------------------------------------------------"
3376	else
3377	LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3378	fi
3379	if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3380	LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 \| head -1`"
3381	else
3382	LogIt "ERROR: Unable to find mindi-busybox, please install it"
3383	MindiExit -1
3384	fi
3385
3386	for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3387	modinfo $i 2> /dev/null 1> /dev/null
3388	if [ $? -eq 0 ]; then
3389	modprobe $i 2>&1 > /dev/null
3390	fi
3391	done
3392
3393	KERN_DISK_MADE=""
3394
3395	LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3396	LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3397	LogFile "NOT_BOOT = '$NOT_BOOT'"
3398	if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3399	LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3400	MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3401	MakeMountlist $MINDI_TMP/mountlist.txt
3402	CheckMountlist $MINDI_TMP/mountlist.txt
3403	mkdir -p $MINDI_TMP/small-all/tmp
3404	cd "$MINDI_TMP/small-all"
3405	cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE \|\| Die "Cannot copy small all.tar.gz"
3406	tar -cv ./tmp \| gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log \|\| Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3407	sleep 2
3408	LogIt "Done. Exiting."
3409	MindiExit 0
3410	fi
3411
3412	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3413	LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3414	fi
3415
3416	if [ "$kernelpath" = "" ] ; then
3417	[ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3418	echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3419	read ch
3420	if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3421	USE_OWN_KERNEL="yes"
3422	else
3423	USE_OWN_KERNEL="no"
3424	fi
3425	if [ "$USE_OWN_KERNEL" = "yes" ]; then
3426	YOUR_KERNEL_SUCKS=""
3427	kernelpath=`TryToFindKernelPath`
3428	if [ "$kernelpath" = "" ] ; then
3429	echo -n "Please enter kernel path : "
3430	read kernelpath
3431	fi
3432	else
3433	YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3434	fi
3435	fi
3436	if [ "$YOUR_KERNEL_SUCKS" != "" ] \|\| [ "$kernelpath" = "" ] \|\| [ "$kernelpath" = "SUCKS" ] \|\| [ "$kernelpath" = "FAILSAFE" ] ; then
3437	# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3438	if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3439	source $MINDI_LIB/FindDistroFailsafe
3440	# Log kernel image
3441	LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3442	kernelpath="$FAILSAFE_KBIN"
3443	LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3444	LogIt " The failsafe kernel is $kernelpath."
3445	LogIt " However, you are still running your kernel. If Mindi fails to create your"
3446	LogIt " disks then it may still be a result of a problem with your kernel."
3447	pwd=`pwd`
3448	cd "$MINDI_TMP"
3449	mkdir -p lib/modules
3450	cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" \|\| Die "Cannot copy kernel modules."
3451	cd "$pwd"
3452	else
3453	kernelpath=$MINDI_LIB/vmlinuz
3454	LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3455	LogIt " However, you are still running your kernel. If Mindi fails to create your"
3456	LogIt " disks then it may still be a result of a problem with your kernel."
3457	pwd=`pwd`
3458	cd "$MINDI_TMP"
3459	bzip2 -dc $MINDI_LIB/lib.tar.bz2 \| tar -x \|\| Die "Cannot unzip lib.tar.bz2"
3460	cd "$pwd"
3461	fi
3462	YOUR_KERNEL_SUCKS="Your kernel sucks"
3463	fi
3464	echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3465	[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3466
3467	[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3468
3469	PrepareDataDiskImages
3470
3471	ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3472	rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3473	export ramdisk_size=$rds
3474
3475	LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3476	if [ "$ARCH" = "ia64" ] ; then
3477	PrepareBootDiskImage_LILO $kernelpath \|\| Die "Failed to create ia64 image disk image."
3478	else
3479	PrepareBootDiskImage_ISOLINUX $kernelpath \|\| Die "Failed to create $ramdisk_size KB disk image."
3480	fi
3481
3482	[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3483	...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3484
3485	if [ _"$MONDO_SHARE" = _"" ]; then
3486	ListImagesForUser
3487	OfferToMakeBootableISO
3488	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3489	OfferToMakeBootableUSB
3490	fi
3491	LogAll "Finished."
3492	elif [ "$TAPEDEV" ] ; then
3493	if [ "$ARCH" != "ia64" ] ; then
3494	# We need to keep the img file as boot file for ia64 platform
3495	rm -f $MINDI_CACHE/{img,iso}
3496	else
3497	rm -f $MINDI_CACHE/*iso
3498	fi
3499	if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3500	OfferToMakeBootableUSB
3501	fi
3502	OfferToMakeBootableISO
3503	if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3504	cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3505	else
3506	Die "Cannot find all.tar.gz, to be written to tape"
3507	fi
3508	elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3509	OfferToMakeBootableUSB
3510	else
3511	OfferToMakeBootableISO
3512	fi
3513	# cleanup
3514	LogAll "INFO: $FRIENDLY_OUTSTRING"
3515	for mtpt in $FLOPPY_WAS_MOUNTED ; do
3516	mount $mtpt
3517	done
3518	MindiExit 0

Note: See TracBrowser for help on using the repository browser.

Download in other formats: