source: branches/3.0/mindi/mindi @ 3259

Last change on this file since 3259 was 3259, checked in by bruno, 6 years ago
  • Don't use the perl -i option when dealing with stdin
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 126.1 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3259 2014-03-12 20:30:03Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci-hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp_pch"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259    else
260        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261    fi
262    for included_item in $included_list ; do
263        if [ ! -e "$included_item" ] ; then
264            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266            for ii in $sss ; do
267                [ -e "$ii" ] && AddKeyboardMappingFile $ii
268            done
269        else
270            AddKeyboardMappingFile $included_item
271        fi
272    done
273}
274
275
276CopyDependenciesToDirectory() {
277    local outdir incoming counter d found tdir
278    outdir=$1
279    mkdir -p $outdir
280    incoming=`ReadLine`
281    counter=0
282    while [ "$incoming" != "" ] ; do
283        # Non absolute file names should not arrive till here => skipped
284        if [ `echo "$incoming" | cut -c1` != '/' ]; then
285            LogAll "WARNING: Unable to handle $incoming"
286            incoming=`ReadLine`
287            continue
288        fi
289        # no parent directory of incoming should be a link, copy is not possible in that case
290        d=`dirname "$incoming"`
291        found="false"
292        while [ $d != "/" -a $found = "false" ]; do
293            [ -h "$d" ] && found="true"
294            d=`dirname "$d"`
295        done
296        if [ -d "$incoming" -a ! -h "$incoming" ]; then
297            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298        elif [ -e "$incoming" ] && [ $found = "false" ]; then
299            if [ ! -h "$incoming" ]; then
300                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301            else
302                tdir=`dirname "$incoming"`
303                if [ ! -e "$outdir/$tdir" ]; then
304                    mkdir -p "$outdir/$tdir"
305                fi
306                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307            fi
308            # Only uncompress modules if not using udevd
309            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311            fi
312            [ -x "$outdir" ] && StripExecutable $outdir
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        incoming=`ReadLine`
317    done
318}
319
320
321CountItemsIn() {
322    local r
323    r=0
324    for q in $1 ; do
325        r=$(($r+1))
326    done
327    echo $r
328}
329
330
331DropOptimizedLibraries() {
332    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333    filelist=$1
334    outdir=$2
335
336    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337    if [ "$list_of_optimized_libraries" = "" ] ; then
338        return 0
339    fi
340    echo -en "Dropping i686-optimized libraries if appropriate"
341    for optimized_lib_name in $list_of_optimized_libraries ; do
342        echo -en "."
343        reason=""
344        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345        echo "$vanilla_lib_name" >> $filelist
346        LogFile "INFO: Adding $vanilla_lib_name to filelist"
347        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350        # This may return multiple files
351        for resolved in `ReadAllLink $vanilla_lib_name`; do
352            LogFile "INFO: Adding as deps $resolved to filelist"
353            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354            if [ "$vanilla_resolved_name" != "$resolved" ]; then
355                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356                rmdir $outdir$resolved > /dev/null 2> /dev/null
357                ln -sf $vanilla_resolved_name $outdir$resolved
358                LogFile "INFO: Excluding deps $resolved" 
359                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
361                echo "$vanilla_resolved_name" >> $filelist.tmp
362                mv -f $filelist.tmp $filelist
363            fi
364        done
365    done
366    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367    mv -f $filelist.tmp $filelist
368    echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373    local r res mapfile mappath included_item included_list keyfile mp locale
374    LogAll "INFO: Analyzing your keyboard's configuration."
375    KEYDIR=/lib/kbd
376    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
377    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
378    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
379    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
380    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
381    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
382    if [ ! -e "$KEYDIR" ] ; then
383        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
384        return 0
385    fi
386    if [ -e "/etc/sysconfig/keyboard" ] ; then
387        LogFile "INFO: Red Hat-style config detected."
388        keyfile=/etc/sysconfig/keyboard
389    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
390        LogFile "INFO: Slackware-style config detected."
391        keyfile=/etc/rc.d/rc.keymap
392    elif [ -e "/etc/rc.config" ] ; then
393        LogFile "INFO: Debian-style config detected."
394        keyfile=/etc/rc.config
395    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
396        LogFile "INFO: Debian-style config detected."
397        mkdir -p $bigdir/tmp
398        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
399        KBDEPTH=0
400        mkdir -p $bigdir/etc/console
401        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
402        echo ""
403        echo -e "$DONE"
404        return 0
405    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
406        LogFile "INFO: Ubuntu-style config detected."
407        mkdir -p $bigdir/tmp
408        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
409            kbdfile="/etc/console-setup/boottime.kmap.gz"
410        else
411            kbdfile="/etc/console-setup/cached.kmap.gz"
412        fi
413        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
414        KBDEPTH=0
415        mkdir -p $bigdir/etc/console-setup
416        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
417        echo ""
418        echo -e "$DONE"
419        return 0
420    elif [ -e "/etc/rc.conf" ] ; then
421        LogFile "INFO: ArchLinux config detected."
422        keyfile=/etc/rc.conf
423    elif [ -e "/etc/conf.d/keymaps" ] ; then
424        LogFile "INFO: Gentoo-style config detected."
425        keyfile=/etc/conf.d/keymaps
426    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
427        LogFile "INFO: X11-style config detected."
428        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
429    else
430        LogFile "Searching for rc.config ..."
431        keyfile=`find /etc -name rc.config | head -n1`
432        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
433            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
434            return
435        else
436            LogFile "INFO: Found $keyfile"
437        fi
438    fi
439    if [ ! -e "$KEYDIR/keymaps" ] ; then
440        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
441        return
442    fi
443    LogFile "INFO: keyfile=$keyfile"
444    # For SLES we need to remove the .map.gz extension Cf #614
445    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
446    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
447    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo & ArchLinux
448    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
449    LogFile "INFO: locale=$locale"
450    #
451    # Process the keymaps dir once for all
452    # AddKeyboardMappingFile will use it recursively
453    #
454    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
455    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
456    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
457    # If we have multiple keymaps then log it !!
458    echo "$mp" | grep -q " " >> $LOGFILE
459    if [ $? -eq 0 ]; then
460        LogAll "WARNING: Multiple keymaps found: $mp"
461        LogFile "INFO: The following one will be used"
462    fi
463    for i in $mp ; do
464        mappath=$i
465        [ -e "$i" ] && [ ! -d "$i" ] && break
466    done
467    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
468        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
469    fi
470    LogFile "INFO: mappath = $mappath"
471    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
472        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
473        return
474    fi
475    LogAll "INFO: Adding the following keyboard mapping tables: "
476    mkdir -p $bigdir/tmp
477    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
478    KBDEPTH=0
479    AddKeyboardMappingFile $mappath
480    echo ""
481    echo -e "$DONE"
482    rm -f $MINDI_TMP/keymaps.find
483    return 0
484}
485
486
487FindLdlinux32Binary() {
488    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
489    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
490    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
491    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
492    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
494    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
495    if [ ! -e "$LDLINUXC32" ]; then 
496        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
497        LDLINUXC32=/tmp/idoesnthopefullyexist
498    else
499        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
500    fi
501}
502
503
504FindMboot32Binary() {
505    MBOOTC32=/usr/lib/syslinux/mboot.c32
506    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
507    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
508    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
512    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
513    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
514}
515
516FindIsolinuxBinary() {
517    ISOLINUX=/usr/lib/isolinux.bin
518    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
519    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
520    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
524    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
525    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
526}
527
528
529FindSpecificModuleInPath() {
530    local modpaths pwd line
531    pwd=`pwd`
532    if [ "$YOUR_KERNEL_SUCKS" ] ; then
533        cd "$MINDI_TMP"
534    else
535        cd /
536    fi
537    if [ ! -e "$1" ] ; then
538        LogAll "WARNING: cannot search specific path '$1'"
539        return 1
540    fi
541    # Find all files and links (required for some VMWare VMs)
542    modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
543    echo "$modpaths"
544    cd "$pwd"
545}
546
547
548GenerateGiantDependencyList() {
549    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
550
551    echo -en "Analyzing dependency requirements"
552    outfile=$1
553    tempfile=$MINDI_TMP/$$.txt
554    incoming=`ReadLine`
555
556    > $tempfile
557    progress=0
558    res=0
559    noof_lines=$2
560    while [ "$incoming" != "" ] ; do
561        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
562            incoming=`ReadLine`
563            continue
564        fi
565        if [ "$incoming" = "LVMFILES:" ] ; then
566            break
567        fi
568        filelist=`GenerateListForFile "$incoming"`
569        r=$?
570        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
571        res=$(($res+$r))
572#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
573        for fname in $filelist ; do
574            [ "$fname" != "" ] && echo "$fname" >> $tempfile
575        done
576        progress=$(($progress+1))
577        LogProgress $progress $noof_lines
578        incoming=`ReadLine`
579    done
580    if  [ "$incoming" = "LVMFILES:" ] ; then
581        incoming=`ReadLine`
582        lvmversion=""
583        while [ "$incoming" != "" ] ; do
584            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
585                incoming=`ReadLine`
586                continue
587            fi
588            filelist=`GenerateListForFile "$incoming"`
589            for tool in $filelist ; do
590                lvmresolved=`readlink -f $tool`
591                if [ "$tool" = "$lvmresolved" ]; then
592                    echo "$tool" >> $tempfile
593                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
594                    if [ "$lvmversion" = "" ] ; then
595                        lvmversion=`$lvmresolved`
596                        echo "$lvmresolved" >> $tempfile
597                    fi
598                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
599                    if [ "$lvmversion" = "200" ]; then
600                        # pvdata and lvmcreate_initrd don't exist in LVM2
601                        case "$toolstripped" in
602                        "pvdata")
603                            continue
604                            ;;
605                        "lvmcreate_initrd")
606                            continue
607                            ;;
608                        esac
609                    fi
610                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
611                    if [ -e "$toolpath" ] ; then
612                        echo "$toolpath" >> $tempfile
613                        echo "$tool" >> $tempfile
614                    else
615                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
616                    fi
617                    if [ -e "$toolpath" ] ; then
618                        echo "$toolpath" >> $tempfile
619                        echo "$tool" >> $tempfile
620                    else
621                        echo "Where are your LVM-Tools? Couldn't find $tool"
622                    fi
623                else
624                    echo "$tool" >> $tempfile
625                fi
626            done
627            progress=$(($progress+1))
628            LogProgress $progress $noof_lines
629            incoming=`ReadLine`
630        done
631    fi
632    echo -en "$DONE\nMaking complete dependency list"
633
634    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
635    mv -f $tempfile.new $tempfile
636    > $outfile.pre
637    progress=0
638    noof_lines=`cat $tempfile | wc -l`
639    LogFile "---------------------------------"
640    LogFile "List of dependencies:             "
641    LogFile "---------------------------------"
642    for fname in `cat $tempfile` ; do
643        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
644        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
645        progress=$(($progress+1))
646        LogProgress $progress $noof_lines
647    done
648    if [ _"$MONDO_SHARE" != _"" ]; then
649        mkdir -p $bigdir/tmp
650        mkdir -p $bigdir/usr/bin
651        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
652            LogAll "\nINFO: Incorporating post-nuke tarball"
653            old_pwd=`pwd`
654            cd "$bigdir"
655            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
656            cd "$old_pwd"
657        fi
658        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
659            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
660        else
661            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
662            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
663            LogIt "       If Mindi was called by Mondo then send me a bug report."
664            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
665            LogIt "       Finally, run Mindi again."
666            Die "Odd."
667        fi
668        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
669        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
670            LogAll "\nINFO: Incorporating Network-related settings"
671            for r in NETFS-* ISO-PREFIX ; do
672                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
673                LogFile "INFO: Copying $r to ramdisk"
674            done
675        fi
676    fi
677    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
678    rm -f $tempfile $outfile.pre
679    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
680    return $res
681}
682
683
684GenerateListForFile() {
685    local files_found loc fname incoming i res
686    incoming="$1"
687    files_found=""
688    res=0
689
690    for fname in $incoming ; do
691        files_found="$files_found `LocateFile $fname`"
692    done
693
694    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
695}
696
697
698# Returns all disk devices which are part of a raid array
699GetAllRaidMembers() {
700    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
701}
702
703
704GetFileSizeList() {
705    local i
706    for i in `find $1 -type d -o -print` ; do
707        du -sk $i
708    done
709}
710
711
712# Check kernel filesystem capabilites for accessing initrd image
713# Could be ext2 FS (old mode) or initramfs (new mode)
714#
715# Interface definition:
716# param #1: absolute path to kernel image
717GetInitrdFilesystemToUse() {
718
719    # interface test: make sure we have one parameter
720    if [ $# -ne 1 ]; then
721        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
722    fi
723
724    # interface parameters
725    local lvKernelImage=$1
726
727    # local constants (filesystem magic strings)
728    local lcMagicCramfs="<3>cramfs: wrong magic"
729    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
730    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
731    local lcMagicInitfs="<6>checking if image is initramfs...|[<]6[>]Unpacking initramfs...|<6>Trying to unpack rootfs image as initramfs"
732
733    # local variables
734    local lvOffset
735    local lvScanRes
736    local lvUseFilesystem
737
738    # say where we are.
739    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
740
741    # verify that file exists
742    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
743
744    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
745    file $lvKernelImage 2>&1 | grep -q gzip
746    if [ $? -eq 0 ]; then
747        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
748        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
749    else
750        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
751        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
752        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
753        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
754        if [ $lvOffset -eq 0 ]; then
755            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
756            lvScanRes=$lcMagicInitfs
757        else
758            lvOffset=`expr $lvOffset / 2`
759            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
760            # scan again  kernel image
761            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
762        fi
763    fi
764
765    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
766    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
767        lvUseFilesystem="ext2fs"
768    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
769        lvUseFilesystem="ext3fs"
770    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
771        lvUseFilesystem="initramfs"
772    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
773        lvUseFilesystem="cramfs"
774    else
775        # In that case, we are most probably after 2.6.30 and use the supported initramfs
776        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
777        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
778        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
779        lvUseFilesystem="initramfs"
780    fi
781
782    # say what we are using
783    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
784
785    # return file system to use
786    echo "$lvUseFilesystem"
787
788}
789
790# Searches members of raid device
791# $1: raid device (/dev/md...)
792GetRaidDevMembers() {
793    if [ ! -f /etc/raidtab ]; then 
794        return
795    fi
796    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
797}
798
799
800HackPathsToFailsafe() {
801    local incoming newpath stub i pwd
802    incoming=`ReadLine`
803    pwd=`pwd`
804    cd "$MINDI_TMP"
805    while [ "$incoming" != "" ] ; do
806        stub=`basename $incoming`
807        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
808        for i in $newpath ; do
809            echo "$i"
810        done
811        read incoming
812    done
813    cd "$pwd"
814}
815
816
817ListAllPartitions() {
818    local res currline partition all_partitions ap_orig remaining i j
819
820    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
821    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
822    if [ -e "/vmfs/volumes" ]; then
823        # For VMWare ESX 3 get the device names of these volumes
824        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
825    fi
826    return
827}
828
829
830ListImagesForUser() {
831    local path fname
832    path=$MINDI_CACHE
833    echo -en "In the directory '$path' you will find the images:-\n"
834    for fname in `ls $path | grep -F mindi-` ; do
835        printf "%19s " $fname
836    done
837    echo " "
838}
839
840
841ListKernelModulePaths() {
842    local module_list module fname r kern
843    module_list="$MODULES"
844    # Remove unwanted modules from list
845    for i in $DENY_MODS; do
846        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
847        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
848    done
849###
850### Sq-Modification ... Use kernelname for module search path if specified
851###
852    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
853    then
854        kern=${kernelname}
855    else
856        kern="$KERVERRUN"
857    fi
858    export KERVER=$kern
859###
860### Sq-Mod End
861###
862    # Get rid of duplicates, so that if a live kernel module also appears
863    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
864    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
865        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
866        if [ -z "$r" ]; then
867            if [ "`echo "$MODULES" | grep -w $module`" ]; then
868                r="[live module file not found]"
869            else
870                r="[extra module file not found]"
871            fi
872        else
873            [ -f "$r" ] && echo "$r"
874        fi
875        LogFile "INFO: module $module --> $r"
876    done
877    find /lib/modules/$kern/modules.* -type f 2> /dev/null
878}
879
880#
881# Critical function which computes all dependencies (dyn. lib.)
882# for a list of binaries
883#
884LocateDeps() {
885    local incoming fname deps
886    incoming="$*"
887    for fname in $incoming ; do
888        if [ ! -e "$fname" ] ; then
889            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
890            if echo $fname | grep lvm &> /dev/null ; then
891                LogFile "          This warning only affects you if you are using LVM."
892                if echo "$MODULES" | grep lvm &> /dev/null ; then
893                    LogFile "          I think you are, so please take heed!"
894                else
895                    LogFile "          I don't think you are, so don't worry about it."
896                fi
897            fi
898        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
899            newf=`readlink -f $fname`
900            LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
901            ldd $newf 2> /dev/null | ProcessLDD
902        else
903            ldd $fname 2> /dev/null | ProcessLDD
904        fi
905    done
906}
907
908
909# Give all symlinks recursively of a full path name
910ReadAllLink() {
911    file="$1"
912
913    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
914        # We need to normalise the path with .. in it
915        file=`echo $file | perl -p -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
916    done
917    echo "$file"
918    if [ ! -h $file ]; then
919        return 0
920    fi
921
922    link=`readlink $file`
923    d=`dirname $file`
924    # Is link a relative or full path name
925    fchar=`echo $link | cut -c1`
926    # If mother dir is a link print it
927    if [ -h "$d" ]; then
928        echo "$d"
929        d2=`readlink $d`
930        c2=`echo $d2 | cut -c1`
931        if [ "$c2" != "/" ]; then
932            if [ "$c2" != "." ]; then
933                d="/$d2"
934            else
935                d="$d/$d2"
936            fi
937        fi
938    fi
939    if [ "$fchar" != "/" ]; then
940        # Relative or local link
941        ReadAllLink "$d/$link" 
942    else
943        # Absolute path
944        ReadAllLink $link 
945    fi
946}
947
948
949LocateFile() {
950    local i path fname_to_find location output resolved tmp stub cache_id loclist
951    fname_to_find="$1"
952    # It's an absolute path
953    if echo "$fname_to_find" | grep -x "/.*" ; then
954        output="$fname_to_find"
955        if [ -h "$output" ] ; then
956            output="`ReadAllLink $output` $output"
957        fi
958        echo "$output"
959        return 0
960    fi
961    # It's not an absolute path
962    output=""
963    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
964    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
965        [ -h "$path" ] && continue
966        [ ! -e "$path/$fname_to_find" ] && continue
967        output="$path/$fname_to_find $output"
968        if [ -h "$path/$fname_to_find" ] ; then
969            output="`ReadAllLink $path/$fname_to_find` $output"
970        fi
971    done
972    if [ "$output" = "" ] ; then
973        return 1
974    fi
975    echo "$output"
976    return 0
977}
978
979LogProgress() {
980    local i progress modres noof_lines
981 
982    progress=$1
983    noof_lines=$2
984
985    echo -en "\r\t\t\t\t\t\t\t\t"
986    i=$(($progress*100))
987    if [ $noof_lines -ne 0 ]; then
988        i=$(($i/$noof_lines))
989    else
990        i=0
991    fi
992    echo -en "$i"
993    echo -en "%"
994    modres=$(($progress%4))
995    [ "$modres" -eq "0" ] && echo -en "\t/"
996    [ "$modres" -eq "1" ] && echo -en "\t-"
997    [ "$modres" -eq "2" ] && echo -en "\t\\"
998    [ "$modres" -eq "3" ] && echo -en "\t|"
999}
1000
1001# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
1002MakeMondoConfigFile() {
1003    local outfile use_lzo use_comp use_star
1004    outfile=$1
1005    > $outfile
1006    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
1007    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
1008    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
1009    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
1010    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1011    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1012    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1013    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1014    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
1015    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1016    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1017    echo "use-lzo $use_lzo" >> $outfile
1018    echo "use-gzip $use_gzip" >> $outfile
1019    echo "use-star $use_star" >> $outfile
1020    echo "use-lzma $use_lzma" >> $outfile
1021    echo "use-comp $use_comp" >> $outfile
1022    echo "datestamp `date`" >> $outfile
1023    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1024    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1025    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1026    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1027    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1028    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1029    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1030    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1031    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1032    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1033    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1034    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1035    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1036    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1037    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1038    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1039    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1040    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1041    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1042    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1043    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1044    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1045    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1046    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1047    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1048    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1049}
1050
1051# Get PV's for an LV
1052GetPVsForLV() {
1053  if [ -n "$1" ]; then
1054    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1055    if [ -z "$vg" ]; then
1056      return
1057    fi
1058    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1059  fi
1060}
1061
1062
1063MakeMountlist() {
1064    local mountlist all_partitions current_partition \
1065partition_size partition_format outstring partition_number \
1066partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1067absolute_partition old_partition_fmt current_lvolume uname skip
1068
1069    LogFile "------------------------------------"
1070    LogFile "Your raw fstab file looks like this:"
1071    LogFile "------------------------------------"
1072    cat $MY_FSTAB >> $LOGFILE
1073    LogAll "-----------------------------------"
1074    LogAll "Your mountlist will look like this:"
1075    LogAll "-----------------------------------"
1076
1077# mountlist(OUT)
1078    mountlist=$1
1079
1080# NB: partition = device
1081# NB: mountpt = where the device is mounted
1082
1083    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1084
1085    [ "$mountlist" != "" ] && rm -Rf $mountlist
1086    > $mountlist
1087    all_partitions=""
1088   
1089    if [ $LVM != "false" ]; then
1090        LogAll "INFO: Analyzing LVM..."
1091        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1092        if [ $? -ne 0 ]; then
1093            LVM="false"
1094        fi
1095        # Excluded LVs and GVs are not reported here
1096        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1097    fi
1098    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1099    for i in $IMAGE_DEVS ; do
1100        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1101    done
1102    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1103    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1104    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1105    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1106    for c_p in $all_partitions ; do
1107        # Skip fd/cd devices, network FS, cifs
1108        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1109        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1110        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1111            current_partition=`readlink -f $c_p`
1112            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1113                current_partition="$c_p"
1114            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1115                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1116                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1117            fi
1118            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1119        else
1120            current_partition="$c_p"
1121        fi
1122        [ "$c_p" = "none" ] && continue
1123        redhat_label=""
1124        label=""
1125        uuid=""
1126        absolute_partition=`readlink -f $c_p`
1127        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1128
1129        # set default in case we dont't find it
1130        str_to_find_fmt_with=$current_partition
1131
1132        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1133        # current_partition contains only first column of /etc/fstab
1134        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1135            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1136            actual_dev=""
1137
1138            # 1st try, findfs - the RHEL way of finding labels and their partitions
1139            if [ -x "/sbin/findfs" ]; then
1140                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1141            fi
1142   
1143            # 2nd try : blkid, the good way for all LABEL except swap
1144            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1145                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1146                # For LVM FS it will give a /dev/dm-# which should then be converted
1147                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1148                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1149                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1150                    for dev in `ls /dev/mapper/*`; do
1151                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1152                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1153                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1154                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1155                            break
1156                        fi
1157                    done
1158                fi
1159            fi
1160   
1161            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1162            # For LVM gives a /dev/mapper entry
1163            if [ "x$actual_dev" = "x" ]; then
1164                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1165            fi
1166   
1167            # 4th try, with vol_id
1168            # SWAP only
1169            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1170                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1171                for dev_swap in $list_swaps ; do
1172                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1173                    if [ "x$dev_exists" != "x" ]; then
1174                        actual_dev=$dev_swap
1175                        break;
1176                    fi
1177                done
1178            fi
1179
1180            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1181            # LABEL=SW-cciss/c0d0p3 (RDP)
1182            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1183            # SWAP only
1184            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1185                    skip=""
1186                    uname=$KERVERRUN
1187                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1188                    # 2.6.12 needs 16 (FC3)
1189                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1190                    # 2.6.19 and upper needs 1052
1191                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1192                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1193                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1194                    if [ $skip = "" ]; then
1195                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1196                    fi
1197                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1198                    do
1199                        # Location of the swap label for kernel 2.6
1200                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1201                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1202                            actual_dev=$try_dev
1203                        fi
1204                    done
1205            fi
1206
1207            # Check if one of all those tries has known success
1208            if [ "x$actual_dev" != "x" ]; then
1209                current_partition=$actual_dev
1210            else
1211                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1212            fi
1213        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1214        # current_partition contains only first column of /etc/fstab
1215        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1216            uuid=`echo "$current_partition" | cut -d'=' -f2`
1217            actual_dev=""
1218
1219            # 1st try, findfs - the RHEL way of finding labels and their partitions
1220            if [ -x "/sbin/findfs" ]; then
1221                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1222            fi
1223   
1224            # 2nd try : blkid, the good way for all UUID except swap
1225            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1226                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1227                # For LVM FS it will give a /dev/dm-# which should then be converted
1228                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1229                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1230                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1231                    for dev in `ls /dev/mapper/*`; do
1232                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1233                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1234                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1235                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1236                            break
1237                        fi
1238                    done
1239                fi
1240            fi
1241   
1242            # 3th try, with vol_id
1243            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1244                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1245                for dev in $list_dev ; do
1246                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1247                    if [ "x$dev_exists" != "x" ]; then
1248                        actual_dev=$dev
1249                        break;
1250                    fi
1251                done
1252            fi
1253
1254            # 4th try, with dumpuuid (VMWare only ?) for swap
1255            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1256                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1257                for dev in $list_dev ; do
1258                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1259                    if [ "x$dev_exists" != "x" ]; then
1260                        actual_dev=$dev
1261                        break;
1262                    fi
1263                done
1264            fi
1265
1266            # Check if one of all those tries has known success
1267            if [ "x$actual_dev" != "x" ]; then
1268                current_partition=$actual_dev
1269            else
1270                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1271            fi
1272        else
1273            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1274            # they use symlinks in fstab unrelated to what is shown in mount !
1275            if [ _"$partition_mountpt" = _"" ]; then
1276                # set default in case we dont't find it
1277                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1278                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1279                            str_to_find_fmt_with=$tmpp
1280                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1281                            break;
1282                        fi
1283                done
1284            fi
1285        fi
1286
1287        # Detects noauto partitions not mounted and exclude them
1288        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1289        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1290                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1291            continue
1292        fi
1293        # Detects bind partitions and exclude them
1294        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1295                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1296            continue
1297        fi
1298
1299        # Look for devices which have to be excluded
1300        skip=0
1301        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1302            l=""
1303            list_of_devices="`ReadAllLink $current_partition`"
1304            for d in $list_of_devices; do
1305                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1306            done
1307
1308            # Remove PVs from LVs excluded
1309            l="$l `GetPVsForLV $current_partition`"
1310
1311            # We want a single unique list
1312            list_of_devices="`echo $l | sort -u`"
1313
1314            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1315                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1316                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1317                    skip=1
1318                    continue
1319                fi
1320            done
1321        fi
1322        if [ $skip -eq 1 ]; then
1323            continue
1324        fi
1325
1326        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1327        # Detects iso9660 ISO images and exclude them
1328        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1329                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1330            continue
1331        fi
1332        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1333        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1334        # the former is then a link to the latter, so we test whether
1335        # $current_partition is actually such a link or not and set
1336        # $current_lvolume accordingly. On Debian you may find more than one answer
1337        # so we remove the one corresponding to /dev/.static
1338        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1339        # principle is the same and we need to find the link to it as well.
1340        # Note that $current_lvolume may well be an
1341        # ordinary device. It is just to make sure that we feed the right value
1342        # into any of the LVM tools if possible.
1343
1344        current_lvolume="$current_partition"
1345        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1346            # .static dir are a Debian specificity
1347            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1348            echo $current_lvolume | grep -q ' '
1349            if [ $? -eq 0 ]; then
1350                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1351            fi
1352            # if it's not found, it may well be a real device such as a multipath one
1353            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1354            if [ _"$current_lvolume" = _"" ]; then
1355                current_lvolume="$current_partition"
1356            fi
1357        fi
1358        #
1359        # End of LVM device style variation code (other than $current_lvolume).
1360
1361        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1362            # Size computed via LVM not directly
1363            partition_size="lvm"
1364        else
1365            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1366            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1367            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1368                # Skip swap files
1369                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1370                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1371                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1372                [ "$partition_format" != "swap" ] && partition_format="swap"
1373                if [ "$partition_size" = "" ] ; then
1374                    totalsize=0
1375                    items=0
1376                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1377                        totalsize=$(($totalsize+$i))
1378                        items=$(($items+1))
1379                    done
1380                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1381                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1382                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1383                fi
1384            else
1385                partition_size=`SizeOfPartition $current_partition`
1386            fi
1387        fi
1388        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1389        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1390        if [ "$partition_mountpt" = "" ] ; then
1391            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1392                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1393                    partition_mountpt="raid"
1394                    partition_format="raid"
1395                else
1396                    partition_mountpt="lvm"
1397                    partition_format="lvm"
1398                fi
1399            fi
1400        fi
1401        psz=$partition_size
1402        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1403        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1404        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1405            partition_mountpt="image"
1406            old_partition_fmt=$partition_format
1407            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1408            partition_size=$(($partition_size+1)); # just in case
1409            if [ "$partition_format" = "Linux" ] ; then
1410                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1411                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1412                partition_format=$old_partition_fmt
1413            fi
1414        fi
1415
1416        if [ ! "$partition_mountpt" ] ; then
1417            LogFile "------- $FDISK -l $qq log ------------"
1418            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1419                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1420                [ "$partition_format" ] && break
1421            done
1422            LogFile "------- $FDISK log end ------------"
1423            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1424                partition_format="compaq"
1425            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1426                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1427                continue
1428            fi
1429        fi
1430        if [ "$redhat_label" ]; then
1431            label="$redhat_label"
1432        elif [ "$uuid" ]; then
1433            label="$uuid"
1434        fi
1435        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1436        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1437        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1438        if [ "$current_partition" = "" ] ; then
1439            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1440        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1441            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1442                partition_mountpt=raid
1443                partition_format=raid
1444                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1445                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1446            else
1447                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1448            fi
1449        elif [ "$partition_format" = "" ] ; then
1450            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1451        elif [ "$partition_size" = "" ] ; then
1452            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1453        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1454            continue
1455        else
1456            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1457                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1458                partition_format="vfat"
1459            fi
1460            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1461            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1462        fi
1463    done
1464    LogAll "-----------------------------------" 
1465}
1466
1467CheckMountlist() {
1468    local file=$1
1469    # Coherency verification
1470    ML01=`cat $file | wc -l`
1471    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1472    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1473    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1474    if [ "$ML01" -ne "$ML1" ]; then
1475        LogFile "--------------------------------------------"
1476        LogAll "WARNING: Duplicate device entry in mountlist"
1477        LogFile "--------------------------------------------"
1478    fi
1479    if [ "$ML02" -ne "$ML2" ]; then
1480        LogFile "--------------------------------------------"
1481        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1482        LogFile "------------------------------------------------"
1483    fi
1484}
1485
1486OfferToMakeBootableISO() {
1487    local i old_pwd
1488    if [ -z "$ISO_CMD" ]; then
1489        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1490        return
1491    fi
1492    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1493        echo -en "Shall I make a bootable CD image? (y/[n]) "
1494        read i
1495        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1496    fi
1497    rm -Rf $MINDI_TMP/iso
1498    mkdir -p $MINDI_TMP/iso/{images,archives}
1499    LogFile "INFO: mindi_lib = $MINDI_LIB"
1500    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1501    for i in memdisk memtest.bin memtest.img ; do
1502        j=$MINDI_LIB/$i
1503        k=$MINDI_TMP/iso
1504        if [ -e "$j" ] ; then
1505            LogAll "INFO: Copying $j to $k"
1506            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1507            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1508            if [ _"$MONDO_SHARE" != _"" ]; then 
1509                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1510            fi
1511        fi
1512    done
1513    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1514    if [ $KERNEL_IS_XEN = "yes" ]; then
1515        FindMboot32Binary
1516        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1517        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1518    fi
1519    # Useful for syslinux 5.x
1520    FindLdlinux32Binary
1521    if [ -e $LDLINUXC32 ]; then
1522        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1523    fi
1524    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1525    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1526
1527    if [ _"$MONDO_SHARE" != _"" ]; then 
1528        if [ $KERNEL_IS_XEN = "yes" ]; then
1529            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/iso/xen.gz). Did you run out of disk space?"
1530            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/iso/mboot.c32). Did you run out of disk space?"
1531        fi
1532        if [ -e $LDLINUXC32 ]; then
1533            cp $LDLINUXC32 $MONDO_ROOT/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/iso/ldlinux.c32. Did you run out of disk space?"
1534        fi
1535        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1536        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1537    fi
1538    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1539    if [ "$ARCH" != "ia64" ] ; then
1540        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1541    fi
1542    old_pwd=`pwd`
1543    cd "$MINDI_TMP/iso"
1544    if [ "$ARCH" != "ia64" ] ; then
1545        if [ _"$MONDO_SHARE" != _"" ]; then 
1546            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1547            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1548                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1549            fi
1550            if [ $KERNEL_IS_XEN = "yes" ]; then
1551                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1552            fi
1553            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1554        fi
1555        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1556    else
1557        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1558    fi
1559    if [ "$?" -ne "0" ] ; then
1560        LogFile "----------- $ISO_CMD's errors --------------"
1561        LogAll "$ISO_CMD returned the following errors:"
1562        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1563        LogAll "ERROR: Failed to create ISO image."
1564    else
1565        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1566    fi
1567    rm -f $MINDI_TMP/mkisofs.log
1568    cd "$old_pwd"
1569}
1570
1571
1572OfferToMakeBootableUSB() {
1573    local i
1574    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1575        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1576        read i
1577        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1578        if [ "$USBDEVICE" = "" ]; then
1579            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1580            read dev
1581            USBDEVICE=$dev
1582        fi
1583        echo "WARNING: This will erase all content on $USBDEVICE"
1584        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1585        read i
1586        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1587    fi
1588    rm -Rf $MINDI_TMP/usb
1589    mkdir -p $MINDI_TMP/usb
1590    USBPART="${USBDEVICE}1"
1591
1592    echo -en "Transforming $USBDEVICE in a Bootable device " 
1593    echo -en "."
1594    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1595    LogFile "INFO: Checking $USBDEVICE"
1596    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1597    if [ $? -ne 0 ]; then
1598        LogAll "ERROR: Unable to access $USBDEVICE"
1599        LogAll "       Make sure your USB device is plugged in"
1600        MindiExit -1
1601    fi
1602    echo -en "."
1603    # Some distro do auto mount at that point (Ubuntu)
1604    LogFile "INFO: Unmounting $USBPART just in case"
1605    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1606    # If your key has no MBR it may cause an issue
1607    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1608    if [ -r $MBRFILE ]; then
1609        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1610        dd if=$MBRFILE of=$USBDEVICE
1611    else
1612        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1613        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1614    fi
1615    LogFile "INFO: Preparing $USBDEVICE"
1616    cat > $MINDI_TMP/fdisk.txt << EOF
1617d
1618d
1619d
1620d
1621n
1622p
16231
1624
1625
1626t
1627b
1628a
16291
1630w
1631EOF
1632    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1633    if [ $? -ne 0 ]; then
1634        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1635        LogAll "       Make sure your USB device is plugged in"
1636        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1637        MindiExit -1
1638    fi
1639    LogFile "fdisk build file"
1640    LogFile "----------------"
1641    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1642    LogFile "----------------"
1643    rm -f $MINDI_TMP/fdisk.txt
1644    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1645    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1646    echo -en "."
1647    # Calling kpartx in case devices were not created
1648    if [ -x "/sbin/kpartx" ]; then
1649        /sbin/kpartx -a $USBDEVICE
1650    fi
1651    # Some distro do auto mount at that point (Ubuntu)
1652    LogFile "INFO: Unmounting $USBPART just in case again"
1653    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1654    echo -en "."
1655    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1656    if [ "`which dmsetup`" != "" ]; then
1657        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1658        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1659            LogFile "INFO: Removing $block_id from device mapper."
1660            sleep 1
1661            dmsetup remove $block_id
1662        fi
1663    fi
1664    echo -en "."
1665    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1666    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1667    if [ $? -ne 0 ]; then
1668        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1669        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1670        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1671        MindiExit -1
1672    fi
1673    echo -en "."
1674    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1675    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1676    if [ $? -ne 0 ]; then
1677        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1678        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1679        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1680        MindiExit -1
1681    fi
1682    echo -en "."
1683    mkdir -p $MINDI_TMP/usb/images
1684    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1685    echo -en "."
1686    LogFile "INFO: mindi_lib = $MINDI_LIB"
1687    for i in memdisk memtest.bin memtest.img ; do
1688        j=$MINDI_LIB/$i
1689        k=$MINDI_TMP/usb
1690        if [ -e "$j" ] ; then
1691            LogIt "INFO: Copying $j to $k"
1692            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1693            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1694        fi
1695    done
1696    echo -en "."
1697    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1698    echo -en "."
1699    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1700    echo -en "."
1701    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1702    echo -en "."
1703    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1704    echo -en "."
1705    LogAll "----------- syslinux's conf --------------"
1706    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1707    LogAll "------------------------------------------"
1708    umount $MINDI_TMP/usb
1709    if [ "$ARCH" != "ia64" ] ; then
1710        syslinux -v 2>&1 | grep -q 4.02
1711        if [ $? -eq 0 ]; then
1712            # This buggy version of syslinux requires a call to --stupid and not -s
1713            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1714            res=$?
1715        else
1716            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1717            res=$?
1718        fi
1719        if [ $res -ne 0 ] ; then
1720            LogAll "----------- syslinux's errors --------------"
1721            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1722            LogAll "------------------------------------------"
1723            LogIt "ERROR: Failed to create USB image."
1724        else
1725            echo -e "$DONE"
1726            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1727        fi
1728        rm -f $MINDI_TMP/syslinux.log
1729    else
1730        LogAll "ERROR: No USB boot support for ia64"
1731        MindiExit -1
1732    fi
1733}
1734
1735
1736MakeMessageFile() {
1737   
1738    if [ -x "/bin/lsb_release" ]; then
1739        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1740    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1741        DESC="Arch Linux"
1742        if [ -r /var/log/pacman.log ]; then
1743            # there are no releases but we can get the last system upgrade
1744            # Output example:   Arch Linux [2011-03-03 01:39]
1745            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1746        fi
1747    elif [ -r /etc/issue.net ]; then
1748        DESC=`head -1 /etc/issue.net`
1749    elif [ -r /etc/issue ]; then
1750        DESC=`head -1 /etc/issue`
1751    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1752        # For pb >= 0.9.8
1753        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1754    else
1755        DESC="Unknown desc"
1756    fi
1757    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1758    if [ _"$MONDO_SHARE" != _"" ]; then
1759        if [ "$CDRECOVERY" != "yes" ] ; then
1760            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1761                echo -en "Press <enter> to continue.\n"
1762            elif [ ! "$MINDI_TMP" ] ; then
1763                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1764                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1765                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1766                fi
1767            else
1768                echo -en "$BOOT_MEDIA_MESSAGE"
1769            fi
1770        else
1771            echo -en "\
1772To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1773CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1774        fi
1775    fi
1776
1777    # Also create the other help screens
1778    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1779    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1780    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1781}
1782
1783
1784MakeBootConfFile() {
1785    local options i ooo
1786    options=""
1787    # Type of boot file (elilo or syslinux/isolinux)
1788    type=$1
1789    if [ "$type" = "elilo" ]; then
1790        sep="="
1791    else
1792        sep=" "
1793    fi
1794
1795    # Generic header for conf file
1796    if [ "$type" != "elilo" ] ; then
1797        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1798    else
1799        echo -en "prompt\n"
1800    fi
1801
1802    # Compute which default option to boot from
1803    if [ "$CDRECOVERY" = "yes" ] ; then
1804        echo -en "default${sep}RESTORE\n"
1805    # In case it's mondoarchive
1806    elif [ _"$MONDO_SHARE" != _"" ]; then
1807        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1808            echo -en "default${sep}iso\n"
1809        else
1810            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1811        fi
1812    else
1813        echo -en "default${sep}expert\n"
1814    fi
1815
1816    # Handle timeout
1817    if [ "$CDRECOVERY" != "yes" ] ; then
1818        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1819    else
1820        echo -en "timeout${sep}10000\n"
1821    fi
1822    echo -en "\n"
1823
1824    # prepare which labels will be generated
1825    if [ "$CDRECOVERY" = "yes" ] ; then
1826        options="RESTORE expert"
1827    else
1828        if [ _"$MONDO_SHARE" != _"" ]; then
1829            options="interactive expert compare iso nuke isonuke"
1830        else
1831            options="expert"
1832        fi
1833    fi
1834
1835    # Generate rest of conf file
1836    for i in $options ; do
1837        ooo=$i
1838        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1839        if [ "$type" = "elilo" ]; then
1840            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1841        else
1842            ps="/"
1843            if [ "$type" = "syslinux" ]; then
1844                ps=""
1845            fi
1846            if [ $KERNEL_IS_XEN = "no" ]; then
1847                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1848            else
1849                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1850            fi
1851        fi
1852        echo -en "$outstr"
1853    done
1854    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1855        if [ "$type" = "elilo" ]; then
1856            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1857            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1858        else
1859            ps="/"
1860            if [ "$type" = "syslinux" ]; then
1861                ps=""
1862            fi
1863            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1864            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1865        fi
1866    fi
1867}
1868
1869
1870PrepareBootDiskImage_LILO() {
1871    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1872    imagesdir=$MINDI_CACHE
1873    kernelpath=$1
1874
1875    retval=0
1876
1877    old_pwd=`pwd`
1878    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1879    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1880    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1881    echo -en "..."
1882    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1883    mountpoint=$MINDI_TMP/mountpoint.$$
1884    mkdir -p $mountpoint
1885    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1886    LogFile "Creating vfat filesystem on $imagefile" 
1887    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1888    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1889
1890    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1891    mkdir -p $mountpoint/etc
1892    liloconf=$mountpoint/elilo.conf
1893
1894    MakeBootConfFile elilo > $liloconf
1895
1896    # Copy it so that CD-ROM menu entry is satisfied
1897    mountefi=0
1898    df -T | grep /boot/efi | grep -q vfat
1899    if [ $? -ne 0 ]; then
1900        mount /boot/efi
1901        if [ $? -ne 0 ]; then
1902            echo "You have to mount your EFI partition when using mindi"
1903            MindiExit -1
1904        fi
1905        mountefi=1
1906    fi
1907    el=`find /boot/efi -name elilo.efi`
1908    cp $el $mountpoint
1909    cp $liloconf $mountpoint
1910    if [ $mountefi -eq 1 ]; then
1911        umount /boot/efi 2>&1 > /dev/null
1912    fi
1913
1914    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1915    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1916    if [ "$?" -ne "0" ] ; then
1917        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1918        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1919        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1920        rm -f $MINDI_TMP/mtpt.$$
1921        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1922        retval=$(($retval+1))
1923    fi
1924    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1925
1926    mkdir -p $mountpoint/tmp
1927    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1928        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1929    fi
1930
1931    # copy the kernel across
1932    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1933    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1934    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1935    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1936    if [ "$?" -ne "0" ] ; then
1937        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1938        du -sk $mountpoint/* >> $LOGFILE
1939        LogFile "--- end of list of files ---"
1940        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1941        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1942        cd "$old_pwd"
1943        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1944        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1945    #   losetup /dev/loop0 -d
1946        [ "$imagefile" != "" ] && rm -f $imagefile
1947        LogIt "ERROR: Sorry, your kernel is too big for your image"
1948        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1949        return 0
1950    fi
1951    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1952    LogFile "INFO: Free space left on image = $free_space KB"
1953    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1954    # make it bootable
1955    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1956    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1957    if [ "$KERN_DISK_MADE" ] ; then
1958        LogFile "INFO: Not running LILO. It's not that kind of disk."
1959    fi
1960
1961    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1962    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1963    echo -en "..."
1964    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1965    if [ "$retval" -eq "0" ] ; then
1966        echo -en "...$DONE\n"
1967        if [ "$KERN_DISK_MADE" ] ; then
1968            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1969        fi
1970    else
1971        echo -en "...failed\n"
1972        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1973        [ "$imagefile" != "" ] && rm -f $imagefile
1974    fi
1975    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1976    return $retval
1977}
1978
1979
1980PrepareBootDiskImage_ISOLINUX() {
1981    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1982    imagesdir=$MINDI_CACHE
1983    kernelpath=$1
1984    do_boot_root_thingy=""
1985    retval=0
1986
1987    old_pwd=`pwd`
1988    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1989    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1990    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1991    echo -en "..."
1992    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1993    mountpoint=$MINDI_TMP/mountpoint.$$
1994    mkdir -p $mountpoint
1995    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1996    LogFile "INFO: Creating vfat filesystem on $imagefile"
1997    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1998    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1999    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
2000
2001    # Only move it now to its final destination and use it now
2002    mv $imagefile $imagesdir
2003    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
2004
2005    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
2006
2007    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
2008    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
2009    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
2010    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
2011    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
2012    if [ "$?" -ne "0" ] ; then
2013        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
2014        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
2015        LogAll "       Please unload some of your modules and try again."
2016        rm -f $MINDI_TMP/mtpt.$$
2017        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
2018        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2019        retval=$(($retval+1))
2020    fi
2021
2022    mkdir -p $mountpoint/tmp
2023    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
2024        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
2025    fi
2026
2027    # copy the kernel across
2028    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2029    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2030    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2031         
2032    retval=0
2033    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2034    retval=$?
2035    if [ $KERNEL_IS_XEN = "yes" ]; then
2036        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2037        let retval+=$?
2038    fi
2039 
2040    if [ "$retval" -ne "0" ] ; then
2041        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2042        du -sk $mountpoint/* >> $LOGFILE
2043        LogFile "--- end of list of files ---"
2044        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2045        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2046        cd "$old_pwd"
2047        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2048        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2049
2050        LogIt "ERROR: Sorry, your kernel is too big for your image"
2051        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2052    fi
2053    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2054    LogFile "INFO: Free space left on image = $free_space KB"
2055    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2056
2057    # make it bootable
2058    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2059    mkdir -p $mountpoint/etc
2060    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2061    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2062    echo -en "..."
2063    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2064
2065    if [ "$retval" -eq "0" ] ; then
2066        echo -en "...$DONE\n"
2067        if [ "$KERN_DISK_MADE" ] ; then
2068            [ "$imagefile" != "" ] && rm -f $imagefile
2069            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2070        fi
2071    else
2072        echo -en "...failed\n"
2073        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2074        [ "$imagefile" != "" ] && rm -f $imagefile
2075    fi
2076    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2077    return $retval
2078}
2079
2080
2081ParseModprobeForIncludes() {
2082local MODPROBE_CONF mpincfile includes include
2083
2084MODPROBE_CONF=/etc/modprobe.conf
2085mpincfile=$1
2086touch $mpincfile
2087if [ -a $MODPROBE_CONF ]; then
2088    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2089    if [ -n "$includes" ]; then
2090        for include in $includes
2091        do
2092            if [ -a "$include" ]; then
2093                echo $include >> $mpincfile
2094            fi
2095        done
2096    fi
2097fi
2098}
2099
2100
2101PrepareDataDiskImages() {
2102    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2103
2104    imagesdir=$MINDI_CACHE
2105    rm -f $imagesdir/mindi.iso
2106    needlist=$MINDI_TMP/what-we-need.txt
2107    bigdir=$MINDI_TMP/bigdir
2108    mkdir -p $bigdir/usr/bin
2109    mkdir -p $bigdir/usr/sbin
2110    includefile=$MINDI_TMP/$$.includefile.txt
2111
2112    # Check whether /lib64 or /lib is a link and if so explicitly create one in rootfs
2113    if [ -h "/lib64" ]; then
2114        mkdir -p lib || LogIt "ERROR: Unable to create lib in $mountpoint."
2115        if [ ! -h lib64 ]; then
2116            ln -s lib lib64 || LogIt "ERROR: /lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2117        fi
2118    fi
2119    if [ -h "/lib" ]; then
2120        mkdir -p usr/lib || LogIt "ERROR: Unable to create usr/lib in $mountpoint."
2121        mv lib/* usr/lib 2> /dev/null
2122        if [ -d "lib" ]; then
2123            rmdir lib
2124        fi
2125    fi
2126    # Check whether /sbin and /bin are a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2127    if [ -h "/sbin" ]; then
2128        mkdir -p usr/sbin || LogIt "ERROR: Unable to create usr/sbin in $mountpoint."
2129        mv sbin/* usr/sbin 2> /dev/null
2130        if [ -d "sbin" ]; then
2131            rmdir sbin
2132        fi
2133    fi
2134    if [ -h "/bin" ]; then
2135        mkdir -p usr/bin || LogIt "ERROR: Unable to create usr/bin in $mountpoint."
2136        mv bin/* usr/bin 2> /dev/null
2137        if [ -d "bin" ]; then
2138            rmdir bin
2139        fi
2140    fi
2141
2142    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2143    if [ -e "$DEPLIST_FILE" ]; then
2144        lfiles="$DEPLIST_FILE $lfiles"
2145    fi
2146    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2147    ParseModprobeForIncludes $includefile
2148    lines=$(($lines+`cat $includefile | wc -l`))
2149    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2150    res=$?
2151    rm -f $includefile
2152    if [ "$YOUR_KERNEL_SUCKS" ]; then
2153        pwd=`pwd`
2154        cd "$MINDI_TMP"
2155        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2156            tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2157        done
2158        for i in $EXTRA_MODS ; do
2159            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2160            [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2161            for k in $j ; do
2162                tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2163                LogFile "INFO: Added failsafe module $k to ramdisk"
2164            done
2165        done
2166        cd "$pwd"
2167    else
2168        ListKernelModulePaths >> $needlist
2169    fi
2170    if [ "$res" -ne "0" ] ; then
2171        Die "You have $res files present in dependency list\nbut absent from filesystem."
2172    fi
2173    FindAndAddUserKeyboardMappingFile
2174    mkdir -p $bigdir/tmp
2175    if [ _"$MONDO_SHARE" != _"" ]; then
2176        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2177        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2178    fi
2179    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2180    DropOptimizedLibraries $needlist $bigdir
2181    echo -en "Assembling dependency files"
2182
2183    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2184
2185    # also copy io.sys and msdos.sys, if we can find them
2186    for i in `mount | cut -d' ' -f3` ; do
2187        for j in io.sys msdos.sys ; do
2188            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2189        done
2190    done
2191
2192    # master boot record, too
2193    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2194    if [ "$i" ] ; then
2195        LogAll "INFO: Backing up $i's MBR"
2196        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2197        sleep 1
2198        sync
2199        j=$i
2200        [ -h "$j" ] && j=`readlink -f $j`
2201        LogAll "INFO: Creating /dev/boot_device ($j)"
2202        mkdir -p $bigdir/dev
2203        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2204    fi
2205
2206    old_pwd=`pwd`
2207    cd "$bigdir"
2208
2209    # Get terminfo content
2210    ti="usr/share/terminfo/l"
2211    if [ -d /$ti ]; then
2212        mkdir -p $ti
2213        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2214    fi
2215    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2216        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2217        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2218    fi
2219    if [ -d "/lib/dev-state" ]; then 
2220        tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2221    fi
2222    cd "$old_pwd"
2223    echo -e "$DONE"
2224    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2225    MakeMountlist $MINDI_TMP/mountlist.txt
2226    CheckMountlist $MINDI_TMP/mountlist.txt
2227    mkdir -p $bigdir/tmp
2228    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2229    if [ _"$MONDO_SHARE" != _"" ]; then
2230        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2231    fi
2232    if [ $LVM != "false" ]; then
2233        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2234        if [ "$?" -ne "0" ]; then
2235            LVM="false"
2236            rm -f $bigdir/tmp/i-want-my-lvm
2237        else
2238            LogFile "Your i-want-my-lvm file content is:"
2239            LogFile "-----------------------------------"
2240            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2241            LogFile "-----------------------------------"
2242        fi
2243    fi
2244    LogFile "Your mountlist.txt file content is:"
2245    LogFile "-----------------------------------"
2246    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2247    LogFile "-----------------------------------"
2248
2249    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2250    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2251    if [ _"$MONDO_SHARE" != _"" ]; then
2252        for q in filelist.full.gz biggielist.txt ; do
2253            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2254            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2255        done
2256    fi
2257
2258    echo -en "Tarring and zipping the data content..."
2259    size_of_all_tools=`du -sk $bigdir | cut -f1`
2260    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2261    LogFile "Size of the data content"
2262    LogFile "------------------------"
2263    du -sk $imagesdir/*gz >> $LOGFILE
2264    LogFile "------------------------"
2265    echo -e "$DONE"
2266
2267    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2268    rm -rf $bigdir
2269    rm -f $needlist
2270}
2271
2272
2273ProcessLDD() {
2274    local incoming f d nd bd bnd
2275    read incoming
2276    while [ "$incoming" != "" ]; do
2277        # We take the full path name of the dyn. lib. we want
2278        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2279        for f in $incoming ; do
2280            # echo modified file name if one of the parent dir is a link
2281            # by replacing the original dirname by the destination of the link
2282            d="`dirname $f`"
2283            found="false"
2284            while [ "$d" != "/" ]; do
2285                if [ -h "$d" ]; then
2286                    nd=`readlink -f $d`
2287                    bd=`basename $d`
2288                    bnd=`basename $nd`
2289                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2290                    echo $d
2291                fi
2292                d="`dirname $d`"
2293            done
2294
2295            echo "$f"
2296            echo "`ReadAllLink $f`"
2297        done
2298        read incoming
2299    done
2300}
2301
2302
2303Prompt() {
2304    echo -en "$1"
2305    read line
2306}
2307
2308
2309ReadLine() {
2310    local i incoming
2311    read incoming
2312    i=0
2313    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2314        i=$(($i+1))
2315        read incoming
2316    done
2317    echo "$incoming"
2318}
2319
2320
2321SizeOfPartition() {
2322    local devpath drive res stub
2323    device=$1
2324    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2325        Die "Cannot find $device's size - is your /etc/fstab sane?"
2326    fi
2327    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2328        res=`SizeOfRaidPartition $device`
2329        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2330        echo "$res"
2331        return 0
2332    fi
2333    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2334    res=`$FDISK -s $device 2>> $LOGFILE`
2335    # end patch
2336    # take only the first in case of multiple mount (cifs, nfs, ...)
2337    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2338    [ "$res" = "" ] && res="-1"
2339    echo $res
2340    return 0
2341}
2342
2343
2344SizeOfRaidPartition() {
2345    local real_dev smallest_size silly tmp
2346
2347    silly=999999999
2348    smallest_size=$silly
2349
2350    for real_dev in `GetRaidDevMembers $1` ; do
2351        tmp=`SizeOfPartition $real_dev`
2352        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2353    done
2354
2355    if [ "$smallest_size" = "$silly" ] ; then
2356        echo "-1"
2357        return 1
2358    else
2359        echo "$smallest_size"
2360        return 0
2361    fi
2362}
2363
2364
2365StripExecutable()
2366{
2367    local tmpfile
2368
2369    tmpfile=$MINDI_TMP/stripped.$$.dat
2370    [ -d "$1" ] || [ -h "$1" ] && return
2371    cp -f $1 $tmpfile 2>> $LOGFILE
2372    strip $tmpfile 2> /dev/null
2373    if [ "$?" -eq "0" ] ; then
2374        cp -f $tmpfile $1 2>> $LOGFILE
2375        LogFile "INFO: Stripped binary $2"
2376    fi
2377    rm -f $tmpfile
2378}
2379
2380KernelVer() {
2381        local fkern_ver fname
2382
2383        fname=$1
2384        file $fname | grep -q gzip
2385        if [ "$?" -eq "0" ] ; then
2386            # Used by ia64
2387            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2388        else
2389            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2390        fi
2391        echo "$fkern_ver"
2392}
2393
2394
2395# WARNING: This function should just echo the final result !!!
2396#
2397TryToFindKernelPath() {
2398    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2399
2400    we_want_version=$KERVERRUN
2401    possible_kernels=""
2402    duff_kernels=""
2403    output=""
2404   
2405    if [ "$ARCH" = "ia64" ] ; then
2406       root="/boot/efi/efi"
2407    else
2408       root="/"
2409    fi
2410    # See if we're booted from a Xen kernel
2411    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2412    if [ -f /proc/xen/capabilities ]; then
2413        # It's a Xen kernel
2414        KERNEL_IS_XEN="yes"
2415        LogFile "INFO: It's a Xen kernel..."
2416    fi
2417
2418    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2419        [ ! -e "$fname" ] && continue
2420        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2421        fkern_ver=`KernelVer $fname`
2422        [ "$fkern_ver" = "" ] && continue
2423        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2424        [ -f "$fname" ] || continue
2425        [ -h "$fname" ] && continue
2426        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2427        file $fname | grep -q gzip
2428        if [ "$?" -eq "0" ] ; then
2429            # Used by ia64
2430            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2431                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2432                duff_kernels="$fname $duff_kernels"
2433            else
2434                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2435                possible_kernels="$fname $possible_kernels"
2436            fi
2437        else
2438            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2439                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2440                duff_kernels="$fname $duff_kernels"
2441            else
2442                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2443                possible_kernels="$fname $possible_kernels"
2444            fi
2445        fi
2446    done
2447    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2448        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2449    fi
2450    if [ ! "$possible_kernels" ] ; then
2451        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2452        possible_kernels="$duff_kernels"
2453        if [ ! "$possible_kernels" ] ; then
2454            LogAll "INFO: Sorry, no duff kernels either"
2455        else
2456            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2457            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2458        fi
2459    fi
2460    if [ $KERNEL_IS_XEN = "yes" ]; then
2461        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2462        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2463    fi
2464    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2465    noof_kernels=`CountItemsIn "$possible_kernels"`
2466    if [ "$noof_kernels" -eq "0" ] ; then
2467        LogAll "Could not find your kernel."
2468        if [ -e "/boot/vmlinuz" ] ; then
2469            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2470            output=/boot/vmlinuz
2471        else
2472            output=""
2473        fi
2474    elif [ "$noof_kernels" -eq "1" ] ; then
2475        kp=`echo "$possible_kernels" | sed s/' '//`
2476        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2477        output="$kp"
2478    else
2479        for i in $possible_kernels ; do
2480            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2481                LogAll "INFO: OK, I used my initiative and found that "
2482                LogAll "INFO: $i is probably your kernel. "
2483                output="$i"
2484                break
2485            fi
2486        done
2487        if [ ! -n "$output" ]; then
2488            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2489                output=/boot/vmlinuz
2490                LogFile "INFO: Schlomo, this one's for you."
2491            else
2492                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2493                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2494                LogFile "INFO: $possible_kernels"
2495                output=""
2496            fi
2497        fi
2498    fi
2499    if [ $KERNEL_IS_XEN = "yes" ]; then
2500        if [ "$noof_xenkernels" -eq "0" ]; then
2501            xenkernelpath=""
2502        elif [ "$noof_xenkernels" -eq "1" ]; then
2503            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2504            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2505        else
2506            for i in $possible_xenkernels ; do
2507                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2508                    LogFile "INFO: OK, I used my initiative and found that "
2509                    LogFile "INFO: $i is probably your Xen kernel. "
2510                    xenkernelpath="$i"
2511                    break
2512                fi
2513            done
2514            if [ ! -n "$xenkernelpath" ]; then
2515                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2516                if [ ! -n "$new_possible_xenkernels" ]; then
2517                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2518                    LogFile "INFO: Using $xenkernelpath"
2519                else
2520                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2521                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2522                    LogFile "INFO: $possible_xenkernels"
2523                    output=""
2524                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2525                    LogFile "INFO: Using $xenkernelpath"
2526                fi
2527            fi
2528        fi
2529        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2530            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2531        fi
2532    fi
2533    LogAll "TryToFindKernelPath found $output"
2534    echo "$output"
2535}
2536
2537
2538TurnTgzIntoRdz() {
2539    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2540
2541    tgz_dir_fname=$1
2542    rdz_fname=$2
2543    kernelsize=$3
2544    maxsize=$(($BOOT_SIZE-$kernelsize))
2545    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2546    tempfile=$MINDI_TMP/temp.rd
2547    mountpoint=$MINDI_TMP/mnt1
2548    res=0
2549    echo -en "..."
2550    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2551    echo -en "..."
2552    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2553    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2554    echo -en "..."
2555    mkdir -p $mountpoint
2556    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2557    echo -en "..."
2558    old_pwd=`pwd`
2559    cd "$mountpoint"
2560
2561   
2562    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2563    for f in $tgz_dir_fname/*; do 
2564        if [ ! -r $f ]; then
2565            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2566        else
2567            cp -Rdf $f . 2>&1 >> $LOGFILE
2568        fi
2569    done
2570    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2571
2572    cd dev || Die "Can't cd to dev"
2573    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2574    rm -f dev-entries.tgz
2575    cd ..
2576
2577    for w in insmod.static insmod.static.old ; do
2578        s=`which $w 2> /dev/null`
2579        if [ -e "$s" ] ; then
2580            tar cf - -C / $s 2> /dev/null | tar xf -
2581        fi
2582    done
2583
2584    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2585   
2586    # Copy of files mandatory for ssh to automate mount if sshfs is used
2587    mkdir $mountpoint/.ssh
2588    cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2589    echo > $mountpoint/tmp/myssh << EOF
2590ssh -o StrictHostKeyChecking=no $*
2591EOF
2592    chmod 755 $mountpoint/tmp/myssh
2593
2594    # Copy of files mandatory for ld.so
2595    cp -rp /etc/ld.so.c* $mountpoint/etc
2596
2597    # Handle the case where busybox and mount are dynamically linked
2598    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2599    if [ $? -eq 0 ]; then
2600        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2601        rm -f bin/mount
2602    fi
2603
2604    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf file (which includes all busybox deps)
2605    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2606    for f in `grep -v " *#.*" $DEPLIST_DIR/minimal.conf | sort -u`; do
2607        if [ -r $f ]; then
2608            echo $f >> $MINDI_TMP/minimal.lis
2609            LocateDeps $f >> $MINDI_TMP/minimal2.lis
2610        fi
2611    done
2612    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2613        ReadAllLink $f >> $MINDI_TMP/minimal.lis
2614    done
2615    # Initial / are trucated by tar
2616    finallist=""
2617    # Remove directories from the list, as tar will create them anyway
2618    # and it may hurt if /lib is in it as on Debian/Ubuntu
2619    # recent bash says that -d is true for a link to a dir !
2620    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2621        if [ -e $f -a ! -d $f ] || [ -h $f -a ! -d $f ]; then
2622            finallist="$finallist $f"
2623        fi
2624    done
2625    tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2626
2627    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2628    ln -sf /bin/bash bin/sh
2629    LogIt "INFO: Using bash as default shell"
2630    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2631
2632    # Avoids an issue on some distro (RHEL5)
2633    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2634
2635    mkdir -p $mountpoint/tmp
2636    # Management of udev (which includes modprobe in rules)
2637    ps auxww | grep -v grep | grep -qw udevd
2638    if [ $? -eq 0 ]; then
2639        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2640        LogIt "INFO: udev device manager found"
2641        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2642        # This avoids NIC remapping if on another machine at restore time on Debian at least
2643        rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2644        # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2645        rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2646        # Do not do it if it's a link (Ubuntu 64 bits #503)
2647        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [  ! -h "/lib64/udev" ]; then
2648            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2649        fi
2650        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2651            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2652        fi
2653        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2654            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2655        fi
2656        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2657            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2658            lis=""
2659            # Get only the files which exist in that list
2660            # and potentially their symlink structure
2661            for i in $lis2; do
2662                if [ -h $i ]; then
2663                    j=$i
2664                    while [ -h $j ]; do
2665                        lis="$lis $j"
2666                        j=`readlink $j`
2667                    done
2668                    lis="$lis $j"
2669                elif [ -f $i ]; then
2670                    lis="$lis $i"
2671                fi
2672            done
2673            # And their deps
2674            LocateDeps $lis > $MINDI_TMP/udev.lis
2675            for i in $lis; do
2676                if [ "`echo $i | cut -c1`" = "/" ]; then
2677                    j=`echo $i | cut -c2-`
2678                    [ "$j" != "" ] && rm -f $j
2679                fi
2680            done
2681            tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2682            rm -f $MINDI_TMP/udev.lis
2683        else
2684            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2685            LogAll "         mindi will use static devices which may cause problems"
2686            rm -f $mountpoint/tmp/USE-UDEV
2687        fi
2688    fi
2689
2690    # Management of potential HW info (ProLiant only at the moment)
2691    rm -rf $MINDI_CACHE/bkphw
2692    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2693    if [ -d $MINDI_CACHE/bkphw ]; then
2694        LogIt "INFO: Hardware Information found and saved ..."
2695        cp -rp $MINDI_CACHE/bkphw .
2696        if [ -f $MINDI_CACHE/tools.files ]; then
2697            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2698            LocateDeps $lis > $MINDI_TMP/tools.lis
2699            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2700        fi
2701        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2702            mv -f $MINDI_CACHE/mindi-rsthw .
2703            chmod 755 ./mindi-rsthw
2704        fi
2705        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2706    fi
2707
2708    # Management of perl scripts delivered needed at restore time
2709    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2710    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2711
2712    for w in cdrom groovy-stuff ; do
2713        mkdir -p mnt/$w
2714    done
2715
2716    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2717
2718    cd "$old_pwd"
2719    echo -en "..."
2720    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2721        cd "$MINDI_TMP"
2722        needed_modules_path=lib/modules/$FAILSAFE_KVER
2723    else
2724        cd /
2725        if [ "${kernelname}" != "" ]
2726        then
2727            needed_modules_path=lib/modules/${kernelname}
2728        else
2729            needed_modules_path=lib/modules/$KERVERRUN
2730        fi
2731    fi
2732
2733    needed_modules=""
2734    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2735
2736    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2737        # For PXE boot
2738        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2739    fi
2740    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2741        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2742    fi
2743    for i in $DENY_MODS; do
2744        LogFile "INFO: Removing $i from the list of modules to load"
2745        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2746    done
2747
2748    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2749    for i in $list_of_groovy_mods ; do
2750        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2751    done
2752
2753    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2754        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2755        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2756        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2757        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2758        # Uncompress modules if not using udev and native modprobe
2759        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2760            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2761                LogFile "INFO: Uncompressing $i"
2762                gunzip -f $mountpoint/$i
2763            fi
2764        fi
2765        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2766            echo "Replacing module symlink ($i) with actual file"
2767            rm -f $mountpoint/$i
2768            cp -Lf $i $mountpoint/$i
2769            ls -l $mountpoint/$i
2770        fi
2771    done
2772
2773    # Also copy modules.* in case of udev so that normal modprobe works
2774    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2775
2776    # Copy FW in case some drivers needs it
2777    for d in "/lib" "/usr/lib"; do
2778        if [ -d "$d/firmware" ]; then
2779            cp -a "$d/firmware" "$mountpoint/$d"
2780        fi
2781    done
2782
2783    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2784    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2785        if [ -d "$d/multipath" ]; then
2786            cp -a "$d/multipath" "$mountpoint/$d"
2787        fi
2788    done
2789
2790    # Copy an additional ProLiant tool for OBDR support
2791    if [ -f $MINDI_TMP/OBDR ]; then
2792        found=0
2793        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2794            mkdir -p $mountpoint/usr/bin
2795            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2796            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2797            found=1
2798        fi
2799        if [ -x /usr/bin/sg_wr_mode ]; then
2800            mkdir -p $mountpoint/usr/bin
2801            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2802            LocateDeps $lis > $MINDI_TMP/obdr.lis
2803            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2804            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2805            found=1
2806        fi
2807        if [ $found -eq 0 ]; then
2808            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2809            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2810        fi
2811    fi
2812
2813    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2814        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2815        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2816        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile "      ...because kernel is failsafe"
2817        rm -f $mountpoint/sbin/devfsd
2818    fi
2819    cd "$old_pwd"
2820    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2821    if [ _"$MONDO_SHARE" != _"" ]; then
2822        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2823        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2824        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2825        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2826        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2827        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2828        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2829        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2830        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2831    fi
2832    mkdir -p $mountpoint/proc
2833    LogFile "---------------------------"
2834    LogFile "Content of initial ramdisk:"
2835    LogFile "---------------------------"
2836    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2837    LogFile "---------------------------"
2838
2839    # Determine what filesystem to use for initrd image
2840    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2841    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2842    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2843    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2844        # say what will be used
2845        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2846        # kernel expects linuxrc in ext2 filesystem
2847        ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2848        # unmount loop filesystem and create image file using the standard approach
2849        umount $mountpoint || Die "Cannot unmount $tempfile"
2850        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2851        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2852            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2853        else
2854            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2855        fi
2856        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2857        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2858        rm -f ${rdz_fname}.tmp
2859        # log that we are done
2860        LogFile "      ...done."
2861    elif [ "$gvFileSystem" = "initramfs" ]; then
2862        # say what will be used
2863        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2864        # make sure that cpio is there
2865        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2866        # go into filesystem
2867        cd "$mountpoint"
2868        # kernel expects init in cpio filesystem
2869        ln -sf sbin/init init
2870        # create cpio image file and unmount loop filesystem
2871        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2872        cd "$old_pwd"
2873        umount $mountpoint || Die "Cannot unmount $tempfile"
2874        # log that we are done
2875        LogFile "      ...done."
2876    else
2877        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2878    fi
2879
2880    if [ "$res" -eq "0" ] ; then
2881        echo -en "..."
2882    else
2883        echo -en "\rMade an rdz WITH ERRORS.           \n"
2884    fi
2885    return 0
2886}
2887
2888
2889##############################################################################
2890#----------------------------------- Main -----------------------------------#
2891##############################################################################
2892
2893# Now we can create what we need
2894mkdir -p $MINDI_TMP
2895
2896# Purge from potential old run
2897if [ _"$MINDI_CACHE" = _"" ]; then
2898    Die "MINDI_CACHE undefined"
2899fi
2900
2901# --nolog needs to be first, and is used in analyze-my-lvm
2902if [ "$1" = "--nolog" ] ; then
2903    shift
2904    LOGFILE=/dev/stderr
2905else
2906    > $LOGFILE
2907fi
2908if [ "$1" = "--printvar" ] ; then
2909    shift
2910    if [ _"$1" != _"" ] ; then
2911        set | grep -Ew "^$1" | cut -d= -f2
2912    fi
2913    exit 0
2914fi
2915
2916LogFile "mindi v$MINDI_VERSION"
2917LogFile "$ARCH architecture detected"
2918LogFile "mindi called with the following arguments:"
2919echo "$@">> $LOGFILE
2920LogFile "Start date : `date`"
2921LogFile "-----------------------------"
2922
2923[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2924
2925# Log some capital variables
2926[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2927[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2928LogFile "MONDO_SHARE = $MONDO_SHARE"
2929LogFile "MINDI_LIB = $MINDI_LIB"
2930LogFile "MINDI_SBIN = $MINDI_SBIN"
2931LogFile "MINDI_CONF = $MINDI_CONF"
2932if [ -f $MINDI_CONFIG ]; then
2933    LogFile "-----------------------------"
2934    LogFile " Mindi configuration file    "
2935    LogFile "-----------------------------"
2936    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2937    LogFile "-----------------------------"
2938fi
2939LogFile "In Mindi"
2940LogFile "--------"
2941LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2942LogFile "BOOT_SIZE = $BOOT_SIZE"
2943LogFile "--------"
2944
2945trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2946
2947# Sanity checks
2948which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2949which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2950which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2951which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2952if which awk &> /dev/null ; then
2953    if ! which gawk &> /dev/null ; then
2954        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2955    fi
2956fi
2957which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2958[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2959
2960[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2961
2962# Update the PATH variable if incomplete
2963if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2964    PATH=$PATH:/sbin:/usr/sbin
2965    export PATH
2966    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
2967    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
2968    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
2969fi
2970
2971# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2972if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2973    source $MINDI_LIB/FindDistroFailsafe
2974    # Log kernel image
2975    LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2976else
2977    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2978fi
2979
2980if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2981    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2982fi
2983
2984### TODO
2985### Fix as it's not mandatory on ia64
2986if [ "$ARCH" = "ia64" ] ; then
2987    if which elilo &> /dev/null ; then
2988        LILO_EXE=elilo
2989    else
2990        LILO_EXE=`which false 2> /dev/null`
2991    fi
2992else
2993    FindIsolinuxBinary
2994fi
2995trap "Aborted" SIGTERM
2996DONE="\r\t\t\t\t\t\t\t\tDone.         "
2997kernelpath=""
2998MONDO_ROOT=/var/cache/mondo
2999mkdir -p $MONDO_ROOT
3000
3001if [ -d "/proc/lvm" ]; then
3002    # LVM v1
3003    LVMCMD=""
3004    LVM="v1"
3005elif [ -d "/dev/mapper" ]; then
3006    # LVM v2
3007    LVMCMD="lvm"
3008    LVM="v2"
3009else
3010    LVM="false"
3011fi
3012
3013if [ -e "/proc/cmdline" ]; then
3014    CMDLINE="/proc/cmdline"
3015elif [ -e "/tmp/cmdline" ]; then
3016    CMDLINE="/tmp/cmdline"
3017else
3018    CMDLINE="/dev/null"
3019fi
3020
3021LogFile "INFO: LVM set to $LVM"
3022LogFile "----------"
3023LogFile "mount result:"
3024LogFile "-------------"
3025mount >> $LOGFILE
3026if [ -e /etc/raidtab ]; then
3027    LogFile "-------------"
3028    LogFile "/etc/raidtab content:"
3029    LogFile "-------------"
3030    cat /etc/raidtab >> $LOGFILE
3031else
3032    LogFile "No file /etc/raidtab"
3033fi
3034if [ -e /etc/mdadm.conf ]; then
3035    LogFile "-------------"
3036    LogFile "/etc/mdadm.conf content:"
3037    LogFile "-------------"
3038    cat /etc/mdadm.conf >> $LOGFILE
3039else
3040    LogFile "-------------"
3041    LogFile "No file /etc/mdadm.conf"
3042fi
3043LogFile "-------------"
3044LogFile "cat $CMDLINE"
3045LogFile "-------------"
3046cat $CMDLINE >> $LOGFILE
3047LogFile "-------------"
3048LogFile "cat /proc/swaps:"
3049LogFile "-------------"
3050cat /proc/swaps >> $LOGFILE
3051LogFile "-------------"
3052if [ -e /proc/mdstat ]; then
3053    LogFile "cat /proc/mdstat:"
3054    LogFile "-------------"
3055    cat /proc/mdstat >> $LOGFILE
3056else
3057    LogFile "No pseudo file /proc/mdstat"
3058fi
3059LogFile "-------------"
3060LogFile "cat /proc/partitions:"
3061LogFile "-------------"
3062cat /proc/partitions >> $LOGFILE
3063LogFile "-------------"
3064LogFile "cat /proc/filesystems:"
3065LogFile "-------------"
3066cat /proc/filesystems >> $LOGFILE
3067LogFile "-------------"
3068LogFile "lsmod result:"
3069LogFile "-------------"
3070lsmod >> $LOGFILE
3071MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3072if [ -x /usr/sbin/esxcfg-module ]; then
3073    LogFile "-------------"
3074    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3075    LogFile "-------------"
3076    LogFile "VMWare modules"
3077    LogFile "-------------"
3078    /usr/sbin/esxcfg-module -l >> $LOGFILE
3079    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3080fi
3081LogFile "Liste of extra modules is:" 
3082LogFile "-------------" 
3083LogFile "$EXTRA_MODS" 
3084LogFile "-------------" 
3085LogFile "FORCE_MODS:"
3086LogFile "-------------"
3087LogFile "$FORCE_MODS"
3088LogFile "-------------"
3089LogFile "DENY_MODS:"
3090LogFile "-------------"
3091LogFile "$DENY_MODS"
3092LogFile "-------------"
3093LogFile "df result:"
3094LogFile "----------"
3095df -aT >> $LOGFILE
3096LogFile "-------------"
3097LogFile "df -i result:"
3098LogFile "----------"
3099df -i >> $LOGFILE
3100LogFile "-------------"
3101if [ -r /boot/grub/menu.lst ]; then
3102    LogFile "-------------"
3103    LogFile "INFO: /boot/grub/menu.lst content"
3104    LogFile "-------------"
3105    cat /boot/grub/menu.lst >> $LOGFILE
3106    LogFile "-------------"
3107fi
3108if [ -r /boot/grub/grub.conf ]; then
3109    LogFile "-------------"
3110    LogFile "INFO: /boot/grub/grub.conf content"
3111    LogFile "-------------"
3112    cat /boot/grub/grub.conf >> $LOGFILE
3113    LogFile "-------------"
3114fi
3115if [ -r /boot/grub/grub.cfg ]; then
3116    LogFile "-------------"
3117    LogFile "INFO: /boot/grub/grub.cfg content"
3118    LogFile "-------------"
3119    cat /boot/grub/grub.cfg >> $LOGFILE
3120    LogFile "-------------"
3121fi
3122if [ -r /boot/grub/device.map ]; then
3123    LogFile "-------------"
3124    LogFile "INFO: /boot/grub/device.map content"
3125    LogFile "-------------"
3126    cat /boot/grub/device.map >> $LOGFILE
3127    LogFile "-------------"
3128fi
3129if [ -r /etc/lilo.conf ]; then
3130    LogFile "-------------"
3131    LogFile "INFO: /etc/lilo.conf content"
3132    LogFile "-------------"
3133    cat /etc/lilo.conf >> $LOGFILE
3134fi
3135LogFile "Full fdisk info"
3136LogFile "---------------"
3137$FDISK -l >> $LOGFILE
3138LogFile "----------------"
3139LogFile "List of extra modules is:"
3140LogFile "$EXTRA_MODS"
3141LogFile "-------------"
3142
3143# Compute libata version
3144laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3145# If libata v2 is used then remove ide-generic as it will perturbate boot
3146if [ "`echo $MODULES | grep libata`" ]; then
3147    if [ "$laver" = "2" ]; then
3148        DENY_MODS="$DENY_MODS ide-generic"
3149        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3150        LogFile "-------------"
3151    fi
3152fi
3153
3154# Check for McAfee which disturbs the access to some files (tgz in articular)
3155if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3156    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3157    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3158    LogFile "WARNING: You have two options:"
3159    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3160    LogFile "WARNING:  - Disable the scanner during the backup"
3161fi
3162
3163# Check for ISO_CMD command
3164if [ ! -x $ISO_CMD ]; then
3165    LogFile "NOTE: No CD image (ISO file) utility found"
3166fi
3167
3168FLOPPY_WAS_MOUNTED=""
3169for mtpt in /media/floppy /mnt/floppy /floppy ; do
3170    if mount | grep -w $mtpt &> /dev/null ; then
3171        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3172        umount $mtpt
3173    fi
3174done
3175
3176#
3177# If we have a USB device we need to store info
3178# and remove it from the parameters line
3179#
3180if [ "$#" -ne "0" ] ; then
3181    if [ "$1" = "--usb" ] ; then
3182        shift
3183        USBDEVICE=$1
3184        if [ _"$USBDEVICE" = _"" ]; then
3185            Die "No USB device specified"
3186        fi
3187        shift
3188    fi
3189fi
3190
3191if [ "$#" -ne "0" ] ; then
3192    if [ "$1" = "--findkernel" ] ; then
3193        resk=`TryToFindKernelPath`
3194        # Avoids logfile content for mondo
3195        export MONDO_SHARE=""
3196        if [ "$resk" = "" ] ; then
3197            if [ $KERNEL_IS_XEN = "yes" ]; then
3198                echo "$xenkernelpath"
3199                LogFile "INFO: xenkernelpath = $xenkernelpath"
3200                MindiExit 0
3201            else
3202                MindiExit -1
3203            fi
3204        else
3205            echo "$resk"
3206            LogFile "INFO: kernelpath = $resk"
3207            MindiExit 0
3208        fi
3209    elif [ "$1" = "--locatedeps" ] ; then
3210        [ ! "$2" ] && Die "Please specify the binary to look at"
3211        LocateDeps $*
3212        # Avoids logfile content for mondo
3213        export MONDO_SHARE=""
3214        MindiExit $?
3215    elif [ "$1" = "--readalllink" ] ; then
3216        [ ! "$2" ] && Die "Please specify the binary to look at"
3217        # Avoids logfile content for mondo
3218        export MONDO_SHARE=""
3219        ReadAllLink $2
3220        MindiExit $?
3221    elif [ "$1" = "--makemessage" ] ; then
3222        MakeMessageFile | cut -c1-80
3223        MindiExit 0
3224    elif [ "$1" = "--makemountlist" ] ; then
3225        [ ! "$2" ] && Die "Please specify the output file"
3226        MakeMountlist $2
3227        CheckMountlist $2
3228        # Avoids logfile content for mondo
3229        export MONDO_SHARE=""
3230        MindiExit $?
3231    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3232        echo "Mindi v$MINDI_VERSION"
3233        # Avoids logfile content for mondo
3234        export MONDO_SHARE=""
3235        MindiExit 0
3236    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3237        MONDO_TMP=$2
3238        # Change MINDI_TMP for the one provided by mondo
3239        # So that it can get back the built files
3240        if [ _"$MONDO_TMP" = _"" ]; then
3241            Die "MONDO_TMP is empty, aborting"
3242        fi
3243        if [ _"$MONDO_TMP" = _"/" ]; then
3244            Die "MONDO_TMP is /, aborting"
3245        fi
3246        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3247        rmdir $MINDI_TMP
3248        export MINDI_TMP=$MONDO_TMP
3249        mkdir -p $MINDI_TMP
3250
3251        # This is the scratch dir in mondo - subdir images
3252        MINDI_CACHE=$3
3253
3254        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3255        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3256       
3257###
3258### Sq-Modification...
3259### Attempt to locate kernel specific module path
3260### if module path is found then use it other wise use uname -r to set it...
3261###
3262        if [ $KERNEL_IS_XEN = "yes" ]; then
3263            LogAll "INFO: xenkernelpath = $xenkernelpath"
3264        fi
3265        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3266        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3267        then
3268           LogAll "WARNING: Module path for ${kernelpath} not found..."
3269           LogAll "         using running kernel\'s modules."
3270           kernelname=$KERVERRUN
3271        else
3272           LogAll "Using modules for kernel: ${kernelname}"
3273        fi
3274        LogAll "INFO: kernelname = $kernelname"
3275        LogAll "INFO: kernelpath = $kernelpath"
3276###
3277### end of Sq-Modification
3278###
3279        TAPEDEV=$5
3280        TAPESIZE=$6
3281        FILES_IN_FILELIST=$7
3282        USE_LZO=$8
3283        CDRECOVERY=$9
3284        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3285            IMAGE_DEVS=""
3286        else
3287            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3288        fi
3289        if [ "${11}" ] ; then
3290            LILO_OPTIONS=""
3291    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3292        fi
3293        LAST_FILELIST_NUMBER=${12}
3294        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3295        export MINDI_EXCLUDE_DEVS="${14}"
3296        USE_COMP="${15}"
3297        USE_LILO="${16}"
3298        USE_STAR="${17}"
3299        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3300        DIFFERENTIAL="${19}"
3301        USE_GZIP="${20}"
3302        NOT_BOOT="${21}"
3303        [ "$USE_COMP" = "" ] && USE_COMP=yes
3304        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3305        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3306        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3307        # MONDO_ROOT is the real scratchdir
3308        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3309        if [ _"$MONDO_ROOT" != _"" ]; then
3310            mkdir -p $MONDO_ROOT
3311        else
3312            Die "MONDO_ROOT is undefined"
3313        fi
3314    else
3315        LogScreen "Syntax: mindi (--custom ....)"
3316        MindiExit -1
3317    fi
3318fi
3319
3320if [ _"$MINDI_CACHE" != _"" ]; then
3321    rm -rf $MINDI_CACHE/* 2> /dev/null
3322    mkdir -p $MINDI_CACHE
3323fi
3324
3325[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3326
3327if [ _"$MONDO_SHARE" = _"" ]; then
3328    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3329    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3330    LogIt "BusyBox sources are available from http://www.busybox.net"
3331    LogIt "------------------------------------------------------------------------------"
3332else
3333    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3334fi
3335if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3336    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3337else
3338    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3339    MindiExit -1
3340fi
3341
3342for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3343    modinfo $i 2> /dev/null 1> /dev/null
3344    if [ $? -eq 0 ]; then
3345        modprobe $i 2>&1 > /dev/null
3346    fi
3347done
3348
3349KERN_DISK_MADE=""
3350
3351LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3352LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3353LogFile "NOT_BOOT = '$NOT_BOOT'"
3354if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3355    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3356    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3357    MakeMountlist $MINDI_TMP/mountlist.txt
3358    CheckMountlist $MINDI_TMP/mountlist.txt
3359    mkdir -p $MINDI_TMP/small-all/tmp
3360    cd "$MINDI_TMP/small-all"
3361    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3362    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3363    sleep 2
3364    LogIt "Done. Exiting."
3365    MindiExit 0
3366fi
3367
3368if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3369    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3370fi
3371
3372if [ "$kernelpath" = "" ] ; then
3373    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3374    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3375    read ch
3376    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3377        USE_OWN_KERNEL="yes"
3378    else
3379        USE_OWN_KERNEL="no"
3380    fi
3381    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3382        YOUR_KERNEL_SUCKS=""
3383        kernelpath=`TryToFindKernelPath`
3384        if [ "$kernelpath" = "" ] ; then
3385            echo -n "Please enter kernel path : "
3386            read kernelpath
3387        fi
3388    else
3389        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3390    fi
3391fi
3392if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3393    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3394    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3395        source $MINDI_LIB/FindDistroFailsafe
3396        # Log kernel image
3397        LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3398        kernelpath="$FAILSAFE_KBIN"
3399        LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3400        LogIt "      The failsafe kernel is $kernelpath."
3401        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3402        LogIt "      disks then it may still be a result of a problem with your kernel."
3403        pwd=`pwd`
3404        cd "$MINDI_TMP"
3405        mkdir -p lib/modules
3406        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3407        cd "$pwd"
3408    else
3409        kernelpath=$MINDI_LIB/vmlinuz
3410        LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3411        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3412        LogIt "      disks then it may still be a result of a problem with your kernel."
3413        pwd=`pwd`
3414        cd "$MINDI_TMP"
3415        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3416        cd "$pwd"
3417    fi
3418    YOUR_KERNEL_SUCKS="Your kernel sucks"
3419fi
3420echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3421[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3422
3423[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3424
3425PrepareDataDiskImages
3426
3427ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3428rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3429export ramdisk_size=$rds
3430
3431LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3432if [ "$ARCH" = "ia64" ] ; then
3433    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3434else
3435    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3436fi
3437
3438[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3439...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3440
3441if [ _"$MONDO_SHARE" = _"" ]; then
3442    ListImagesForUser
3443    OfferToMakeBootableISO
3444    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3445        OfferToMakeBootableUSB
3446    fi
3447    LogAll "Finished."
3448elif [ "$TAPEDEV" ] ; then
3449    if [ "$ARCH" != "ia64" ] ; then
3450        # We need to keep the img file as boot file for ia64 platform
3451        rm -f $MINDI_CACHE/{*img,*iso}
3452    else
3453        rm -f $MINDI_CACHE/*iso
3454    fi
3455    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3456        OfferToMakeBootableUSB
3457    fi
3458    OfferToMakeBootableISO
3459    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3460        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3461    else
3462        Die "Cannot find all.tar.gz, to be written to tape"
3463    fi
3464elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3465    OfferToMakeBootableUSB
3466else
3467    OfferToMakeBootableISO
3468fi
3469# cleanup
3470LogAll "INFO: $FRIENDLY_OUTSTRING"
3471for mtpt in $FLOPPY_WAS_MOUNTED ; do
3472    mount $mtpt
3473done
3474MindiExit 0
Note: See TracBrowser for help on using the repository browser.