source: branches/3.0/mindi/mindi @ 2938

Last change on this file since 2938 was 2938, checked in by bruno, 6 years ago
  • Adds support for more VIA device drivers (pata and rhine)
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 116.3 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 2938 2012-02-02 22:00:12Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23
24MINDI_REV=PBREV
25MINDI_VER=PBVER
26
27MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
28MINDI_PREFIX=XXX
29MINDI_CONF=YYY
30MINDI_SBIN=${MINDI_PREFIX}/sbin
31MINDI_LIB=LLL
32
33# Temporary directory for mindi
34TMPDIR=/tmp
35
36EXTRA_SPACE=80152       # increase if you run out of ramdisk space
37BOOT_SIZE=36864         # size of the boot disk
38
39PROMPT_MAKE_CD_IMAGE="yes"
40    # Ask if you want to make a CD Image to be written?
41    # if this is set to 'no', then the image will be created automatically
42
43PROMPT_MAKE_USB_IMAGE="yes"
44    # Ask if you want to make a USB Image to be written?
45    # if this is set to 'no', then the image will be created automatically
46
47USE_OWN_KERNEL="yes"
48    # If set to "no", you will be prompted for whether or not
49    # you want to use your own kernel, or the supplied default.
50    # If "yes" mindi will automatically use your own kernel.
51
52KERNEL_IS_XEN="no"
53    # If set to "no", the kernel is not a Xen kernel
54    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
55xenkernelpath=""
56 
57MY_FSTAB=/etc/fstab
58TAPE_MODS="ht st osst ide-tape ide_tape"
59SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi iscsi_tcp libiscsi scsi_transport_iscsi libiscsi_tcp isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp dc395x diskdumplib scsi_dump_register arcmsr"
60
61# ide-probe-mod
62IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon"
63PCMCIA_MODS="pcmcia_core ds yenta_socket"
64USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_storage input hid uhci_hcd ehci_hcd uhci-hcd ehci-hcd ohci-hcd ohci_hcd xhci usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
65NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse libcrc32c netbk xenblktap r8169 virtio_net via_rhine"
66CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
67# Those modules will only go on the backup media, not the boot media.
68EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs"
69# Replace with that line for HP OCMP e.g.
70#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
71DENY_MODS="kqemu"
72# Force some modules to be included
73FORCE_MODS=""
74
75# Find MBR in case of bootable USB device to build
76MBRFILE=/usr/lib/syslinux/mbr.bin
77[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
78[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
79[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
80[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
81
82LOGFILE=/var/log/mindi.log
83MINDI_CACHE=/var/cache/mindi
84BOOT_MEDIA_MESSAGE="\
85To format and restore all files automatically, type 'nuke' <enter>.\n\
86To restore some/all files interactively, type 'interactive' <enter>.\n\
87To compare the archives with your filesystem, type 'compare' <enter>.\n\
88To boot to a command-line prompt (expert mode), type 'expert' <enter>.\n\
89You may add one or more of the following parameters as well:-\n\n\
90        donteject - mondorestore will not eject the CD; this is useful if, for\n\
91                    instance, your PC's case has a concealed CD-ROM drive\n\
92        noresize  - your mountlist will not be adjusted to use your unallocated\n\
93                    hard disk space\n\
94        textonly  - do not call any Newt library routines; this is unattractive\n\
95                    but valuable if you find your Newt library has bugs in it\n\n\
96e.g. Type 'nuke donteject textonly' if you have an unstable Newt library and \n\
97a PC whose CD-ROM drive tray would be damaged if it unexpectedly ejected.\n\
98"
99FDISK=$MINDI_SBIN/parted2fdisk
100
101# Using a config file allow to overwrite some values
102MINDI_CONFIG="$MINDI_CONF/mindi.conf"
103if [ -f $MINDI_CONFIG ]; then
104    . $MINDI_CONFIG
105fi
106DEPLIST_FILE="$MINDI_CONF/deplist.txt"
107DEPLIST_DIR="$MINDI_CONF/deplist.d"
108
109ISO_CMD="/usr/bin/mkisofs"
110ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
111
112# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
113# However, they use exactly the same command line parameters, so just
114# use genisoimage if it's available.
115if [ ! -x $ISO_CMD ]; then
116    ISO_CMD=/usr/bin/genisoimage
117fi
118
119# Last function called before exiting
120# Parameter is exit code value
121# Should be declared here as used immediately below potentialy
122MindiExit() {
123    echo "Mindi $MINDI_VERSION is exiting" >> $LOGFILE
124    echo "End date : `date`" >> $LOGFILE
125    if [ _"$MONDO_SHARE" != _"" ] ; then
126        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
127        cat $LOGFILE >> /var/log/mondoarchive.log
128        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
129    fi
130
131    cd /
132    sync&
133
134    # Clean temporary files only when standalone mindi
135    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
136        rm -Rf $MINDI_TMP
137    fi
138    exit $1
139}
140
141LogOnly() {
142    echo -e "$1" >> $LOGFILE
143    if [ _"$2" != _"" ]; then
144        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
145    fi
146    rm -f "$2"
147}
148
149# Function to log on screen only
150LogScreen() {
151    if [ -e /dev/stderr ] ; then
152        echo -e "$1" >> /dev/stderr
153    elif [ -e /usr/bin/logger ] ; then
154        /usr/bin/logger -s $1
155    fi
156}
157
158# Function to log in log file only
159LogFile() {
160
161    echo -e "$1" >> $LOGFILE
162    if [ _"$2" != _"" ]; then
163        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
164    fi
165    rm -f "$2"
166}
167
168# Function to log in both screen and logfile
169LogAll() {
170    LogScreen "$1"
171    LogFile "$1" "$2"
172}
173
174# Preserved for compatibility
175LogIt() {
176    LogAll "$1" "$2"
177}
178
179
180Die() {
181    local i
182    if [ "$1" = "" ] ; then
183        LogIt "FATAL ERROR"
184    else
185        LogIt "FATAL ERROR. $1"
186    fi
187    if [ _"$2" != _"" ]; then
188        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
189    fi
190    rm -f "$2"
191
192    LogIt "Please e-mail a copy of $LOGFILE to the mailing list."
193    LogIt "See http://www.mondorescue.org for more information."
194    LogIt "WE CANNOT HELP unless you enclose that file.\n"
195    MindiExit -1
196}
197
198# Now we can create what we need
199MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
200if [ $? -ne 0 ]; then
201    df $TMPDIR
202    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
203fi
204if [ _"$MINDI_TMP" = _"" ]; then
205    Die "MINDI_TMP is empty, aborting"
206fi
207if [ _"$MINDI_TMP" = _"/" ]; then
208    Die "MINDI_TMP is /, aborting"
209fi
210export MINDI_TMP
211
212# ----------------------------------------------------------------------------
213
214
215AbortHere() {
216    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
217    Die "Program is terminating in response to signal received from OS/user"
218}
219
220
221Aborted() {
222    trap SIGHUP SIGTERM SIGTRAP SIGINT
223    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
224    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
225    Die "User abort."
226}
227
228
229AddFileToCfgIfExists() {
230    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
231}
232
233
234AddKeyboardMappingFile() {
235    local mappath r included_list included_item i res ii sss
236    mappath=$1
237    KBDEPTH=$(($KBDEPTH+1))
238    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
239    if [ -e "$bigdir/$mappath" ] ; then
240        echo "$mappath already added" >> $LOGFILE
241        return
242    elif [ -d "$bigdir/$mappath" ] ; then
243        echo "Cannot add $mappath: it's a directory. Sorry."
244        return
245    fi
246    echo "Added kbd map $mappath" >> $LOGFILE
247    if [ ! -e "$mappath" ] ; then
248            mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
249        if [ ! -e "$mappath" ] ; then
250            LogIt "Cannot add $mappath: kbd map file not found"
251            return
252        fi
253    else
254        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
255    fi
256
257    mkdir -p $bigdir/etc
258    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
259    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
260        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
261    else
262        included_list=`grep -Fi include $mappath | sed s/'"'// | sed s/'"'// | cut -d' ' -f2`
263    fi
264    for included_item in $included_list ; do
265        if [ ! -e "$included_item" ] ; then
266                sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
267            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
268            for ii in $sss ; do
269                [ -e "$ii" ] && AddKeyboardMappingFile $ii
270            done
271        else
272            AddKeyboardMappingFile $included_item
273        fi
274    done
275}
276
277
278CopyDependenciesToDirectory() {
279    local outdir incoming fname counter d found
280    outdir=$1
281    mkdir -p $outdir
282    incoming=`ReadLine`
283    counter=0
284    while [ "$incoming" != "" ] ; do
285        # Non absolute file names should not arrive till here => skipped
286        if [ `echo "$incoming" | cut -c1` != '/' ]; then
287            LogIt "Unable to handle $incoming"
288            incoming=`ReadLine`
289            continue
290        fi
291        # no parent directory of incoming should be a link, copy is not possible in that case
292        d=`dirname "$incoming"`
293        found="false"
294        while [ $d != "/" -a $found = "false" ]; do
295            [ -h "$d" ] && found="true"
296            d=`dirname "$d"`
297        done
298        if [ -d "$incoming" ] && [ ! -h "$incoming" ]; then
299            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir
300        elif [ -e "$incoming" ] && [ $found = "false" ]; then
301            tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
302
303            # Only uncompress modules if not using udevd
304            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
305                gunzip -f $outdir/$incoming || LogIt "Cannot gunzip $outdir/$incoming"
306            fi
307            [ -x "$outdir" ] && StripExecutable $outdir "-$filename-"
308            counter=$(($counter+1))
309            if [ "$counter" -ge "5" ] ; then
310                counter=0
311                echo -en "."
312            fi
313        fi
314        incoming=`ReadLine`
315    done
316}
317
318
319CountItemsIn() {
320    local r
321    r=0
322    for q in $1 ; do
323        r=$(($r+1))
324    done
325    echo $r
326}
327
328
329DropOptimizedLibraries() {
330    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
331    filelist=$1
332    outdir=$2
333
334    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
335    if [ "$list_of_optimized_libraries" = "" ] ; then
336        return 0
337    fi
338    echo -en "Dropping i686-optimized libraries if appropriate"
339    for optimized_lib_name in $list_of_optimized_libraries ; do
340        echo -en "."
341        reason=""
342        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
343        echo "$vanilla_lib_name" >> $filelist
344        echo "Adding $vanilla_lib_name to filelist" >> $LOGFILE
345        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
346        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
347
348        # This may return multiple files
349        for resolved in `ReadAllLink $vanilla_lib_name`; do
350            echo "Adding as deps $resolved to filelist" >> $LOGFILE
351            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
352            mkdir -p $outdir$resolved> /dev/null 2> /dev/null
353            rmdir $outdir$resolved > /dev/null 2> /dev/null
354            ln -sf $vanilla_resolved_name $outdir$resolved
355            echo "Excluding deps $resolved" >> $LOGFILE
356            grep -Fvx "$resolved" "$filelist" > $filelist.tmp
357            echo "Replacing it with $vanilla_resolved_name" >> $LOGFILE
358            echo "$vanilla_resolved_name" >> $filelist.tmp
359            mv -f $filelist.tmp $filelist
360        done
361    done
362    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
363    mv -f $filelist.tmp $filelist
364    echo -e "$DONE"
365}
366
367
368FindAndAddUserKeyboardMappingFile() {
369    local r res mapfile mappath included_item included_list keyfile mp locale
370    LogIt "Analyzing your keyboard's configuration."
371    KEYDIR=/lib/kbd
372    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
373    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/lib/kbd
374    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share
375    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole
376    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/condole-setup
377    if [ ! -e "$KEYDIR" ] ; then
378        LogIt "Keyboard mapping directory not found. I shall use default map at boot-time."
379        return 0
380    fi
381    if [ -e "/etc/sysconfig/keyboard" ] ; then
382        echo "Red Hat-style config detected." >> $LOGFILE
383        keyfile=/etc/sysconfig/keyboard
384    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
385        echo "Slackware-style config detected." >> $LOGFILE
386        keyfile=/etc/rc.d/rc.keymap
387    elif [ -e "/etc/rc.config" ] ; then
388        echo "Debian-style config detected." >> $LOGFILE
389        keyfile=/etc/rc.config
390    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
391        echo "Debian-style config detected." >> $LOGFILE
392        echo -en "Adding the following keyboard mapping tables: "
393        mkdir -p $bigdir/tmp
394        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
395        KBDEPTH=0
396        mkdir -p $bigdir/etc/console
397        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
398        echo ""
399        echo -e "$DONE"
400        return 0
401    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
402        echo "Ubuntu-style config detected." >> $LOGFILE
403        echo -en "Adding the following keyboard mapping tables: "
404        mkdir -p $bigdir/tmp
405        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
406            kbdfile="/etc/console-setup/boottime.kmap.gz"
407        else
408            kbdfile="/etc/console-setup/cached.kmap.gz"
409        fi
410        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
411        KBDEPTH=0
412        mkdir -p $bigdir/etc/console-setup
413        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
414        echo ""
415        echo -e "$DONE"
416        return 0
417    elif [ -e "/etc/rc.conf" ] ; then
418        echo "ArchLinux config detected." >> $LOGFILE
419        keyfile=/etc/rc.conf
420    elif [ -e "/etc/conf.d/keymaps" ] ; then
421        echo "Gentoo-style config detected." >> $LOGFILE
422        keyfile=/etc/conf.d/keymaps
423    else
424        echo -en "Searching for rc.config ..."
425        keyfile=`find /etc -name rc.config | head -n1`
426        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
427            LogIt "Unknown config detected. Default keyboard map will be used."
428            return
429        else
430            echo "Found $keyfile" >> $LOGFILE
431        fi
432    fi
433    if [ ! -e "$KEYDIR/keymaps" ] ; then
434        LogIt "Keyboard mapping directory not found. Default keyboard map will be used."
435        return
436    fi
437    echo "keyfile=$keyfile" >> $LOGFILE
438    locale=`grep -F KEYTABLE "$keyfile" | tr -d '"' |cut -d'=' -f2`
439    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
440    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | tr -d '"' |cut -d'=' -f2`        # Gentoo & ArchLinux
441    echo "locale=$locale" >> $LOGFILE
442    #
443    # Process the keymaps dir once for all
444    # AddKeyboardMappingFile will use it recursively
445    #
446    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
447    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
448    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
449    # If we have multiple keymaps then log it !!
450    echo "$mp" | grep -q " "
451    if [ $? -eq 0 ]; then
452        echo "WARNING: Multiple keymaps found: $mp" | tee -a $LOGFILE
453        echo "The following one will be used" >> $LOGFILE
454    fi
455    for i in $mp ; do
456        mappath=$i
457        [ -e "$i" ] && [ ! -d "$i" ] && break
458    done
459    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
460            mappath=$(find / -name "*/kbd/keymaps/*/$locale")
461    fi
462    echo "mappath = $mappath" >> $LOGFILE
463    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
464        LogIt "Keyboard mapping file not found. Default keyboard map will be used."
465        return
466    fi
467    echo -en "Adding the following keyboard mapping tables: "
468    mkdir -p $bigdir/tmp
469    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
470    KBDEPTH=0
471    AddKeyboardMappingFile $mappath
472    echo ""
473    echo -e "$DONE"
474    rm -f $MINDI_TMP/keymaps.find
475    return 0
476}
477
478
479FindMboot32Binary() {
480    MBOOTC32=/usr/lib/syslinux/mboot.c32
481    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/mboot.c32
482    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
483    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
484    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
485    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
486    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
487    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
488    LogFile "Found mboot.c32 at $MBOOTC32"
489}
490
491FindIsolinuxBinary() {
492    ISOLINUX=/usr/lib/isolinux.bin
493    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
494    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
495    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
496    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
497    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
498    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
499    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
500    echo "Found isolinux.bin at $ISOLINUX" >> $LOGFILE
501}
502
503
504FindSpecificModuleInPath() {
505    local modpaths pwd line
506    pwd=`pwd`
507    if [ "$YOUR_KERNEL_SUCKS" ] ; then
508        cd "$MINDI_TMP"
509    else
510        cd /
511    fi
512    if [ ! -e "$1" ] ; then
513        LogIt "WARNING - cannot search specific path '$1'"
514        return 1
515    fi
516    # Find all files and links (required for some VMWare VMs)
517    modpaths=`find $1 -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2 -type f -o -type l`
518    echo "$modpaths"
519    cd "$pwd"
520}
521
522
523GenerateGiantDependencyList() {
524    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
525
526    echo -en "Analyzing dependency requirements"
527    outfile=$1
528    tempfile=$MINDI_TMP/$$.txt
529    incoming=`ReadLine`
530
531    > $tempfile
532    progress=0
533    res=0
534    noof_lines=$2
535    while [ "$incoming" != "" ] ; do
536        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
537            incoming=`ReadLine`
538            continue
539        fi
540        if [ "$incoming" = "LVMFILES:" ] ; then
541            break
542        fi
543        filelist=`GenerateListForFile "$incoming"`
544        r=$?
545        [ "$r" -ne "0" ] && LogIt "$incoming not found"
546        res=$(($res+$r))
547#       echo "'$incoming' generates filelist '$filelist'" >> $LOGFILE
548        for fname in $filelist ; do
549            [ "$fname" != "" ] && echo "$fname" >> $tempfile
550        done
551        progress=$(($progress+1))
552        echo -en "\r\t\t\t\t\t\t\t\t"
553        i=$(($progress*100))
554        i=$(($i/$noof_lines))
555        echo -en "$i"
556        echo -en "%"
557        modres=$(($progress%4))
558        [ "$modres" -eq "0" ] && echo -en "\t/"
559        [ "$modres" -eq "1" ] && echo -en "\t-"
560        [ "$modres" -eq "2" ] && echo -en "\t\\"
561        [ "$modres" -eq "3" ] && echo -en "\t|"
562        incoming=`ReadLine`
563    done
564    if  [ "$incoming" = "LVMFILES:" ] ; then
565        incoming=`ReadLine`
566        lvmversion=""
567        while [ "$incoming" != "" ] ; do
568            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
569                incoming=`ReadLine`
570                continue
571            fi
572            filelist=`GenerateListForFile "$incoming"`
573            for tool in $filelist ; do
574                lvmresolved=`readlink -f $tool`
575                if [ "$tool" = "$lvmresolved" ]; then
576                    echo "$tool" >> $tempfile
577                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
578                    if [ "$lvmversion" = "" ] ; then
579                        lvmversion=`$lvmresolved`
580                        echo "$lvmresolved" >> $tempfile
581                    fi
582                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
583                    if [ "$lvmversion" = "200" ]; then
584                        # pvdata and lvmcreate_initrd don't exist in LVM2
585                        case "$toolstripped" in
586                        "pvdata")
587                            continue
588                            ;;
589                        "lvmcreate_initrd")
590                            continue
591                            ;;
592                        esac
593                    fi
594                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
595                    if [ -e "$toolpath" ] ; then
596                        echo "$toolpath" >> $tempfile
597                        echo "$tool" >> $tempfile
598                    else
599                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
600                    fi
601                    if [ -e "$toolpath" ] ; then
602                        echo "$toolpath" >> $tempfile
603                        echo "$tool" >> $tempfile
604                    else
605                        echo "Where are your LVM-Tools? Couldn't find $tool"
606                    fi
607                else
608                    echo "$tool" >> $tempfile
609                fi
610            done
611            progress=$(($progress+1))
612            echo -en "\r\t\t\t\t\t\t\t\t"
613            i=$(($progress*100))
614            i=$(($i/$noof_lines))
615            echo -en "$i"
616            echo -en "%"
617            modres=$(($progress%4))
618            [ "$modres" -eq "0" ] && echo -en "\t/"
619            [ "$modres" -eq "1" ] && echo -en "\t-"
620            [ "$modres" -eq "2" ] && echo -en "\t\\"
621            [ "$modres" -eq "3" ] && echo -en "\t|"
622            incoming=`ReadLine`
623        done
624    fi
625    echo -en "$DONE\nMaking complete dependency list"
626
627    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
628    mv -f $tempfile.new $tempfile
629    > $outfile.pre
630    progress=0
631    noof_lines=`cat $tempfile | wc -l`
632    echo "---------------------------------" >> $LOGFILE
633    echo "List of dependencies:             " >> $LOGFILE
634    echo "---------------------------------" >> $LOGFILE
635    for fname in `cat $tempfile` ; do
636        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
637        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
638        progress=$(($progress+1))
639        echo -en "\r\t\t\t\t\t\t\t\t"
640        i=$(($progress*100))
641        i=$(($i/$noof_lines))
642        echo -en "$i"
643        echo -en "%"
644        modres=$(($progress%4))
645        [ "$modres" -eq "0" ] && echo -en "\t/"
646        [ "$modres" -eq "1" ] && echo -en "\t-"
647        [ "$modres" -eq "2" ] && echo -en "\t\\"
648        [ "$modres" -eq "3" ] && echo -en "\t|"
649    done
650    if [ _"$MONDO_SHARE" != _"" ]; then
651        mkdir -p $bigdir/tmp
652        mkdir -p $bigdir/sbin
653        mkdir -p $bigdir/bin
654        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
655            LogIt "\nIncorporating post-nuke tarball"
656            old_pwd=`pwd`
657            cd "$bigdir"
658            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogIt "Error occurred when untarring post-nuke tarball" $MINDI_TMP/$$.log
659            cd "$old_pwd"
660        fi
661        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
662            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
663        else
664            LogIt "Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
665            LogIt "I bet you've got a spare copy of Mondo or Mindi floating around on your system."
666            LogIt "If Mindi was called by Mondo then send me a bug report.\n It not, type 'ps ax' to see which Mondo-related process is still running;\n then kill it. :-)\n Finally, run Mindi again."
667            Die "Odd."
668        fi
669        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nMondo v1.2x defaults to LILO as the bootloader, BTW."
670        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
671            LogIt "\nIncorporating Network-related settings"
672            for r in NETFS-* ISO-PREFIX ; do
673                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
674                echo "Copying $r to ramdisk" >> $LOGFILE
675            done
676        fi
677    fi
678    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
679    rm -f $tempfile $outfile.pre
680    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
681    return $res
682}
683
684
685GenerateListForFile() {
686    local files_found loc fname incoming i res
687    incoming="$1"
688    files_found=""
689    res=0
690
691    for fname in $incoming ; do
692        files_found="$files_found `LocateFile $fname`"
693    done
694
695    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
696}
697
698
699# Returns all disk devices which are part of a raid array
700GetAllRaidMembers() {
701    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
702}
703
704
705GetFileSizeList() {
706    local i
707    for i in `find $1 -type d -o -print` ; do
708        du -sk $i
709    done
710}
711
712
713GetHomeDir() {
714    local res loc
715    loc=`which $1 2>/dev/null`
716    res=`file $loc | $AWK '{print $NF;}'`
717    dirname $res
718}
719
720
721# Check kernel filesystem capabilites for accessing initrd image
722# Could be ext2 FS (old mode) or initramfs (new mode)
723#
724# Interface definition:
725# param #1: absolute path to kernel image
726GetInitrdFilesystemToUse() {
727
728    # interface test: make sure we have one parameter
729    if [ $# -ne 1 ]; then
730        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
731    fi
732
733    # interface parameters
734    local lvKernelImage=$1
735
736    # local constants (filesystem magic strings)
737    local lcMagicCramfs="<3>cramfs: wrong magic"
738    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
739    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
740    local lcMagicInitfs="<6>checking if image is initramfs...|<6>Unpacking initramfs...|<6>Trying to unpack rootfs image as
741initramfs"
742
743    # local variables
744    local lvOffset
745    local lvScanRes
746    local lvUseFilesystem
747
748    # say where we are.
749    echo "  GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage" >> $LOGFILE
750
751    # verify that file exists
752    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
753
754    # Kernel may be gzip compressed
755    file $lvKernelImage 2>&1 | grep -q gzip
756    if [ $? -eq 0 ]; then
757        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs"`
758
759        # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
760        if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
761            lvUseFilesystem="ext2fs"
762        elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
763            lvUseFilesystem="ext3fs"
764        elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
765            lvUseFilesystem="initramfs"
766        elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
767            lvUseFilesystem="cramfs"
768        else
769            lvUseFilesystem="UNSUPPORTED"
770        fi
771
772    else
773        # In that case, we are after 2.6.30 and use the supported initramfs
774        lvUseFilesystem="initramfs"
775    fi
776    # say what we are using
777    echo "  GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem.\n" >> $LOGFILE
778
779    # return file system to use
780    echo "$lvUseFilesystem"
781
782}
783
784# Searches parent raid device of given disk device
785# $1: disk device (i.e. /dev/hda1)
786GetParentRaidDev() {
787    if [ ! -f /etc/raidtab ]; then 
788        return
789    fi
790    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {dev=\$2} /^[[:space:]]*device/ {if(\$2==\"$1\") {print dev; exit}}" < /etc/raidtab
791}
792
793
794# Searches members of raid device
795# $1: raid device (/dev/md...)
796GetRaidDevMembers() {
797    if [ ! -f /etc/raidtab ]; then 
798        return
799    fi
800    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
801}
802
803
804HackPathsToFailsafe() {
805    local incoming newpath stub i pwd
806    incoming=`ReadLine`
807    pwd=`pwd`
808    cd "$MINDI_TMP"
809    while [ "$incoming" != "" ] ; do
810        stub=`basename $incoming`
811        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
812        for i in $newpath ; do
813            echo "$i"
814        done
815        read incoming
816    done
817    cd "$pwd"
818}
819
820
821ListAllPartitions() {
822    local res currline partition all_partitions ap_orig remaining i j
823
824    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
825    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
826    if [ -e "/vmfs/volumes" ]; then
827        # For VMWare ESX 3 get the device names of these volumes
828        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
829    fi
830    return
831}
832
833
834ListImagesForUser() {
835    local path fname
836    path=$MINDI_CACHE
837    echo -en "In the directory '$path' you will find the images:-\n"
838    for fname in `ls $path | grep -F mindi-` ; do
839        printf "%19s " $fname
840    done
841    echo " "
842}
843
844
845ListKernelModulePaths() {
846    local module_list module fname r kern
847    module_list="$MODULES"
848    # Remove unwanted modules from list
849    for i in $DENY_MODS; do
850        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
851        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
852    done
853###
854### Sq-Modification ... Use kernelname for module search path if specified
855###
856    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
857    then
858        kern=${kernelname}
859    else
860        kern="$KERVERRUN"
861    fi
862    export KERVER=$kern
863###
864### Sq-Mod End
865###
866    # Get rid of duplicates, so that if a live kernel module also appears
867    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
868    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
869        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
870        if [ -z "$r" ]; then
871            if [ "`echo "$MODULES" | grep -w $module`" ]; then
872                r="[live module file not found]"
873            else
874                r="[extra module file not found]"
875            fi
876        else
877            [ -f "$r" ] && echo "$r"
878        fi
879        echo "module $module --> $r" >> $LOGFILE
880    done
881    find /lib/modules/$kern/modules.* -type f 2> /dev/null
882}
883
884#
885# Critical function which computes all dependencies (dyn. lib.)
886# for a list of binaries
887#
888LocateDeps() {
889    local incoming fname deps
890    incoming="$*"
891    for fname in $incoming ; do
892        if [ ! -e "$fname" ] ; then
893            echo "WARNING - $fname does not exist; cannot be LDD'd." >> $LOGFILE
894            if echo $fname | grep lvm &> /dev/null ; then
895                echo "This warning only affects you if you are using LVM." >> $LOGFILE
896                if echo "$MODULES" | grep lvm &> /dev/null ; then
897                    echo "I think you are, so please take heed!" >> $LOGFILE
898                else
899                    echo "I don't think you are, so don't worry about it." >> $LOGFILE
900                fi
901            fi
902        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
903            echo "$fname is softlink" >> $LOGFILE
904        else
905            ldd $fname 2> /dev/null | ProcessLDD
906        fi
907    done
908}
909
910
911# Give all symlinks recursively of a full path name
912ReadAllLink() {
913    file="$1"
914
915    echo $file | grep -q '\.\./'
916    if [ $? -eq 0 ]; then
917        # We need to normalise the path with .. in it
918        file=`echo $file | perl -pi -e 's|([^/]+)/([^/]+)/\.\./([^/]+)|$1/$3|'`
919    fi
920    echo "$file"
921    if [ ! -h $file ]; then
922        return 0
923    fi
924
925    link=`readlink $file`
926    d=`dirname $file`
927    fchar=`echo $link | cut -c1`
928    # If mother dir is a link print it
929    if [ -h "$d" ]; then
930        echo "$d"
931        d=`readlink $d`
932    fi
933    if [ "$fchar" != "/" ]; then
934        # Relative or local link
935        ReadAllLink "$d/$link" 
936    else
937        # Absolute path
938        ReadAllLink $link 
939    fi
940}
941
942
943LocateFile() {
944    local i path fname_to_find location output resolved tmp stub cache_id loclist
945    fname_to_find="$1"
946    # It's an absolute path
947    if echo "$fname_to_find" | grep -x "/.*" ; then
948        output="$fname_to_find"
949        if [ -h "$output" ] ; then
950            output="`ReadAllLink $output` $output"
951        fi
952        echo "$output"
953        return 0
954    fi
955    # It's not an absolute path
956    output=""
957    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
958    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
959        [ -h "$path" ] && continue
960        [ ! -e "$path/$fname_to_find" ] && continue
961        output="$path/$fname_to_find $output"
962        if [ -h "$path/$fname_to_find" ] ; then
963            output="`ReadAllLink $path/$fname_to_find` $output"
964        fi
965    done
966    if [ "$output" = "" ] ; then
967        return 1
968    fi
969    echo "$output"
970    return 0
971}
972
973
974# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
975MakeMondoConfigFile() {
976    local outfile use_lzo use_comp use_star
977    outfile=$1
978    > $outfile
979    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
980    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
981    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
982    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
983    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
984    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
985    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
986    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
987    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
988    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
989    echo "use-lzo $use_lzo" >> $outfile
990    echo "use-gzip $use_gzip" >> $outfile
991    echo "use-star $use_star" >> $outfile
992    echo "use-comp $use_comp" >> $outfile
993    echo "datestamp `date`" >> $outfile
994    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
995    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
996    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
997    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
998    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
999    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1000    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1001    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1002    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1003    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1004    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1005    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1006    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1007    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1008    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1009    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1010    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1011    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1012    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1013    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1014    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1015    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1016    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1017    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1018    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1019}
1020
1021# Get PV's for an LV
1022GetPVsForLV() {
1023  if [ -n "$1" ]; then
1024    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1025    if [ -z "$vg" ]; then
1026      return
1027    fi
1028    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1029  fi
1030}
1031
1032
1033MakeMountlist() {
1034    local mountlist all_partitions current_partition \
1035partition_size partition_format outstring partition_number \
1036partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1037absolute_partition old_partition_fmt current_lvolume uname skip
1038
1039    echo "Your raw fstab file looks like this:" >> $LOGFILE
1040    echo "------------------------------------" >> $LOGFILE
1041    cat $MY_FSTAB >> $LOGFILE
1042    echo "Your mountlist will look like this:" | tee -a $LOGFILE
1043    echo "-----------------------------------" >> $LOGFILE
1044
1045# mountlist(OUT)
1046    mountlist=$1
1047
1048# NB: partition = device
1049# NB: mountpt = where the device is mounted
1050
1051    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1052
1053    [ "$mountlist" != "" ] && rm -Rf $mountlist
1054    > $mountlist
1055    all_partitions=""
1056   
1057    if [ $LVM != "false" ]; then
1058        echo -en "Analyzing LVM...\n"
1059        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1060        if [ $? -ne 0 ]; then
1061            LVM="false"
1062        fi
1063        # Excluded LVs and GVs are not reported here
1064        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1065    fi
1066    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1067    for i in $IMAGE_DEVS ; do
1068        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1069    done
1070    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1071    printf "        %-15s %-15s %-15s %-15s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE (MB)" LABEL/UUID | tee -a $LOGFILE
1072    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1073    for c_p in $all_partitions ; do
1074        # Skip fd/cd devices, network FS, cifs
1075        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1076        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1077        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1078            current_partition=`readlink -f $c_p`
1079            [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ] && current_partition="$c_p"
1080            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1081        else
1082            current_partition="$c_p"
1083        fi
1084        [ "$c_p" = "none" ] && continue
1085        redhat_label=""
1086        label=""
1087        uuid=""
1088        absolute_partition=`readlink -f $c_p`
1089        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1090
1091        # Detects noauto partitions not mounted and exclude them
1092        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$current_partition" | /bin/grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1093        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1094            continue
1095        fi
1096
1097        # set default in case we dont't find it
1098        str_to_find_fmt_with=$current_partition
1099
1100        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1101        # current_partition contains only first column of /etc/fstab
1102        if [ "`echo "$current_partition" | /bin/grep -i "LABEL="`" != "" ]; then
1103            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1104            actual_dev=""
1105
1106            # 1st try, findfs - the RHEL way of finding labels and their partitions
1107            if [ -x "/sbin/findfs" ]; then
1108                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1109            fi
1110   
1111            # 2nd try : blkid, the good way for all LABEL except swap
1112            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1113                actual_dev=`/sbin/blkid | /bin/grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1114                # For LVM FS it will give a /dev/dm-# which should then be converted
1115                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1116                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1117                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1118                    for dev in `ls /dev/mapper/*`; do
1119                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1120                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1121                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1122                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1123                            break
1124                        fi
1125                    done
1126                fi
1127            fi
1128   
1129            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1130            # For LVM gives a /dev/mapper entry
1131            if [ "x$actual_dev" = "x" ]; then
1132                actual_dev=`/bin/mount -l | /bin/grep "\[$redhat_label\]" | cut -d' ' -f1`
1133            fi
1134   
1135            # 4th try, with vol_id
1136            # SWAP only
1137            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1138                list_swaps=`cat /proc/swaps | /bin/grep "/dev/" | $AWK '{ print $1 }' `
1139                for dev_swap in $list_swaps ; do
1140                    dev_exists=`/sbin/vol_id $dev_swap | /bin/grep "$redhat_label"`
1141                    if [ "x$dev_exists" != "x" ]; then
1142                        actual_dev=$dev_swap
1143                        break;
1144                    fi
1145                done
1146            fi
1147
1148            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1149            # LABEL=SW-cciss/c0d0p3 (RDP)
1150            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1151            # SWAP only
1152            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | /bin/grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1153                    skip=""
1154                    uname=$KERVERRUN
1155                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1156                    # 2.6.12 needs 16 (FC3)
1157                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1158                    # 2.6.19 and upper needs 1052
1159                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1160                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1161                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1162                    if [ $skip = "" ]; then
1163                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1164                    fi
1165                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1166                    do
1167                        # Location of the swap label for kernel 2.6
1168                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1169                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1170                            actual_dev=$try_dev
1171                        fi
1172                    done
1173            fi
1174
1175            # Check if one of all those tries has known success
1176            if [ "x$actual_dev" != "x" ]; then
1177                current_partition=$actual_dev
1178            else
1179                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1180            fi
1181        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1182        # current_partition contains only first column of /etc/fstab
1183        elif [ "`echo "$current_partition" | /bin/grep -i "UUID="`" != "" ]; then
1184            uuid=`echo "$current_partition" | cut -d'=' -f2`
1185            actual_dev=""
1186
1187            # 1st try, findfs - the RHEL way of finding labels and their partitions
1188            if [ -x "/sbin/findfs" ]; then
1189                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1190            fi
1191   
1192            # 2nd try : blkid, the good way for all UUID except swap
1193            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1194                actual_dev=`/sbin/blkid | /bin/grep "$uuid" | grep UUID= | cut -d':' -f1`
1195                # For LVM FS it will give a /dev/dm-# which should then be converted
1196                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1197                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1198                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1199                    for dev in `ls /dev/mapper/*`; do
1200                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1201                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1202                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1203                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1204                            break
1205                        fi
1206                    done
1207                fi
1208            fi
1209   
1210            # 3th try, with vol_id
1211            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1212                list_dev=`mount | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1213                for dev in $list_dev ; do
1214                    dev_exists=`/sbin/vol_id $dev | /bin/grep "$uuid"`
1215                    if [ "x$dev_exists" != "x" ]; then
1216                        actual_dev=$dev
1217                        break;
1218                    fi
1219                done
1220            fi
1221
1222            # 4th try, with dumpuuid (VMWare only ?) for swap
1223            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1224                list_dev=`cat /proc/swaps | /bin/grep -E '^/' | $AWK '{ print $1 }' `
1225                for dev in $list_dev ; do
1226                    dev_exists=`/sbin/dumpuuid $dev | /bin/grep "$uuid"`
1227                    if [ "x$dev_exists" != "x" ]; then
1228                        actual_dev=$dev
1229                        break;
1230                    fi
1231                done
1232            fi
1233
1234            # Check if one of all those tries has known success
1235            if [ "x$actual_dev" != "x" ]; then
1236                current_partition=$actual_dev
1237            else
1238                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1239            fi
1240        else
1241            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1242            # they use symlinks in fstab unrelated to what is shown in mount !
1243            if [ _"$partition_mountpt" = _"" ]; then
1244                # set default in case we dont't find it
1245                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -Ev "^#" | $AWK '{print $1}'`; do
1246                        if [ _"`readlink -f $tmpp`" = _"$current_partition" ]; then
1247                            str_to_find_fmt_with=$tmpp
1248                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | /bin/grep -w "$tmpp" | /bin/grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1249                            break;
1250                        fi
1251                done
1252            fi
1253        fi
1254
1255        # Look for devices which have to be excluded
1256        skip=0
1257        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1258            l=""
1259            list_of_devices="`ReadAllLink $current_partition`"
1260            for d in $list_of_devices; do
1261                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1262            done
1263
1264            # Remove PVs from LVs excluded
1265            l="$l `GetPVsForLV $current_partition`"
1266
1267            # We want a single unique list
1268            list_of_devices="`echo $l | sort -u`"
1269
1270            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1271                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1272                    echo "Excluding $current_partition from mountlist (due to excluded device $d)" >> $LOGFILE
1273                    skip=1
1274                    continue
1275                fi
1276            done
1277        fi
1278        if [ $skip -eq 1 ]; then
1279            continue
1280        fi
1281
1282        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1283        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1284        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1285        # the former is then a link to the latter, so we test whether
1286        # $current_partition is actually such a link or not and set
1287        # $current_lvolume accordingly. On Debian you may find more than one answer
1288        # so we remove the one corresponding to /dev/.static
1289        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1290        # principle is the same and we need to find the link to it as well.
1291        # Note that $current_lvolume may well be an
1292        # ordinary device. It is just to make sure that we feed the right value
1293        # into any of the LVM tools if possible.
1294
1295        current_lvolume="$current_partition"
1296        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1297            # .static dir are a Debian specificity
1298            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1299            echo $current_lvolume | grep -q ' '
1300            if [ $? -eq 0 ]; then
1301                echo "WARNING: Multiple Logical Volumes found. Report to dev team" >> $LOGFILE 
1302            fi
1303            # if it's not found, it may well be a real device such as a multipath one
1304            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1305            if [ _"$current_lvolume" = _"" ]; then
1306                current_lvolume="$current_partition"
1307            fi
1308        fi
1309        #
1310        # End of LVM device style variation code (other than $current_lvolume).
1311
1312        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1313            # Size computed via LVM not directly
1314            partition_size="lvm"
1315        else
1316            partition_size=`SizeOfPartition $current_partition`
1317            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1318            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1319            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1320                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1321                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1322                [ "$partition_format" != "swap" ] && partition_format="swap"
1323                if [ "$partition_size" = "" ] ; then
1324                    totalsize=0
1325                    items=0
1326                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1327                        totalsize=$(($totalsize+$i))
1328                        items=$(($items+1))
1329                    done
1330                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1331                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1332                    echo "I'm guessing $c_p is $(($partition_size/1024))MB" >> $LOGFILE
1333                fi
1334            fi
1335        fi
1336        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1337        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1338        if [ "$partition_mountpt" = "" ] ; then
1339            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1340                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1341                    partition_mountpt="raid"
1342                    partition_format="raid"
1343                else
1344                    partition_mountpt="lvm"
1345                    partition_format="lvm"
1346                fi
1347            fi
1348        fi
1349        psz=$partition_size
1350        echo "Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)" >> $LOGFILE
1351        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1352        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1353            partition_mountpt="image"
1354            old_partition_fmt=$partition_format
1355            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1356            partition_size=$(($partition_size+1)); # just in case
1357            if [ "$partition_format" = "Linux" ] ; then
1358                echo "Are you imaging a mounted swap partition? Silly..." >> $LOGFILE
1359                echo "Reverting format from $old_partition_fmt to $partition_format" >> $LOGFILE
1360                partition_format=$old_partition_fmt
1361            fi
1362        fi
1363
1364        if [ ! "$partition_mountpt" ] ; then
1365            echo "------- $FDISK -l $qq log ------------" >> $LOGFILE
1366            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1367                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1368                [ "$partition_format" ] && break
1369            done
1370            echo "------- $FDISK log end ------------" >> $LOGFILE
1371            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1372                partition_format="compaq"
1373            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1374                LogIt "Unable to find mountpoint of $current_partition - ignoring"
1375                continue
1376            fi
1377        fi
1378        if [ "$redhat_label" ]; then
1379            label="$redhat_label"
1380        elif [ "$uuid" ]; then
1381            label="$uuid"
1382        fi
1383        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1384        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1385        unofficial_outstring=`printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1386        if [ "$current_partition" = "" ] ; then
1387            echo "Unknown partition (outstring = $unofficial_outstring)" >> $LOGFILE
1388        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1389            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1390                partition_mountpt=raid
1391                partition_format=raid
1392                printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1393                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1394            else
1395                echo "Unknown mountpoint (outstring = $unofficial_outstring)" >> $LOGFILE
1396            fi
1397        elif [ "$partition_format" = "" ] ; then
1398            echo "Unknown format (outstring = $unofficial_outstring)" >> $LOGFILE
1399        elif [ "$partition_size" = "" ] ; then
1400            echo "Unknown partition size (outstring = $unofficial_outstring)" >> $LOGFILE
1401        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1402            continue
1403        else
1404            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1405                    echo "vfat should be used instead of dos/msdos as a partition format" >> $LOGFILE
1406                partition_format="vfat"
1407            fi
1408            printf "\t%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1409            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1410        fi
1411    done
1412}
1413
1414CheckMountlist() {
1415    local file=$1
1416    # Coherency verification
1417    ML01=`cat $file | wc -l`
1418    ML02=`grep -v ' lvm ' $file | wc -l`
1419    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1420    ML2=`grep -v ' lvm ' $file | $AWK '{print $2}' | sort -u | wc -l`
1421    if [ "$ML01" -ne "$ML1" ]; then
1422        echo "--------------------------------------------" >> $LOGFILE
1423        echo "WARNING: Duplicate device entry in mountlist" | tee -a $LOGFILE
1424        echo "--------------------------------------------" >> $LOGFILE
1425    fi
1426    if [ "$ML02" -ne "$ML2" ]; then
1427        echo "--------------------------------------------" >> $LOGFILE
1428        echo "WARNING: Duplicate mountpoint entry in mountlist" | tee -a $LOGFILE
1429        echo "------------------------------------------------" >> $LOGFILE
1430    fi
1431}
1432
1433MakeSureNumberIsInteger() {
1434    res=`echo "$1" | tr -s '\-[0-9]' ' '`
1435    if [ "$res" != " " ] && [ "$res" != "" ] ; then
1436    echo "result = '$res'"
1437        Die "$1 should be an integer"
1438    fi
1439}
1440
1441
1442OfferToMakeBootableISO() {
1443    local i old_pwd
1444    if [ -z "$ISO_CMD" ]; then
1445        LogIt "Neither mkisofs nor genisoimage found, unable to make CD image"
1446        return
1447    fi
1448    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1449        echo -en "Shall I make a bootable CD image? (y/[n]) "
1450        read i
1451        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1452    fi
1453    rm -Rf $MINDI_TMP/iso
1454    mkdir -p $MINDI_TMP/iso/{images,archives}
1455    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogIt "OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1456    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1457    for i in memdisk memtest.bin memtest.img ; do
1458        j=$MINDI_LIB/$i
1459        k=$MINDI_TMP/iso
1460        if [ -e "$j" ] ; then
1461            LogIt "Copying $j to $k"
1462            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1463            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1464            if [ _"$MONDO_SHARE" != _"" ]; then 
1465                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1466            fi
1467        fi
1468    done
1469    MakeMessageFile > $MINDI_TMP/iso/message.txt
1470    if [ $KERNEL_IS_XEN = "yes" ]; then
1471        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1472        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1473    fi
1474    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1475    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1476
1477    if [ _"$MONDO_SHARE" != _"" ]; then 
1478        if [ $KERNEL_IS_XEN = "yes" ]; then
1479            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1480            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1481        fi
1482        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1483        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1484    fi
1485    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1486    if [ "$ARCH" != "ia64" ] ; then
1487        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1488    fi
1489    old_pwd=`pwd`
1490    cd "$MINDI_TMP/iso"
1491    if [ "$ARCH" != "ia64" ] ; then
1492        if [ _"$MONDO_SHARE" != _"" ]; then 
1493            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1494            if [ $KERNEL_IS_XEN = "yes" ]; then
1495                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1496            fi
1497            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1498        fi
1499        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1500    else
1501        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1502    fi
1503    if [ "$?" -ne "0" ] ; then
1504        echo "----------- $ISO_CMD's errors --------------" >> $LOGFILE
1505        cat $MINDI_TMP/mkisofs.log >> $LOGFILE
1506        echo "$ISO_CMD returned the following errors:-"
1507        cat $MINDI_TMP/mkisofs.log
1508        LogIt "Failed to create ISO image."
1509    else
1510        echo "Created bootable ISO image at $MINDI_CACHE/mindi.iso" | tee -a $LOGFILE
1511    fi
1512    rm -f $MINDI_TMP/mkisofs.log
1513    cd "$old_pwd"
1514}
1515
1516
1517OfferToMakeBootableUSB() {
1518    local i
1519    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1520        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1521        read i
1522        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1523        if [ "$USBDEVICE" = "" ]; then
1524            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1525            read dev
1526            USBDEVICE=$dev
1527        fi
1528        echo "WARNING: This will erase all content on $USBDEVICE"
1529        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1530        read i
1531        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1532    fi
1533    rm -Rf $MINDI_TMP/usb
1534    mkdir -p $MINDI_TMP/usb
1535    USBPART="${USBDEVICE}1"
1536
1537    echo -en "Transforming $USBDEVICE in a Bootable device " 
1538    echo -en "."
1539    echo "Transforming $USBDEVICE in a Bootable device"  >> $LOGFILE
1540    echo "Checking $USBDEVICE" >> $LOGFILE
1541    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1542    if [ $? -ne 0 ]; then
1543        echo "Unable to access $USBDEVICE" | tee -a $LOGFILE
1544        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1545        exit -1
1546    fi
1547    echo -en "."
1548    echo "Unmounting $USBPART just in case" >> $LOGFILE
1549    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1550    # If your key has no MBR it may cause an issue
1551    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1552    if [ -r $MBRFILE ]; then
1553        echo "Installing an MBR ($MBRFILE) on $USBDEVICE" | tee -a $LOGFILE
1554        dd if=$MBRFILE of=$USBDEVICE
1555    else
1556        echo "You may need to install an MBR (usually in $MBRFILE, but not found on your system) " | tee -a $LOGFILE
1557        echo "on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE" | tee -a $LOGFILE
1558    fi
1559    echo "Preparing $USBDEVICE" >> $LOGFILE
1560    cat > $MINDI_TMP/fdisk.txt << EOF
1561d
1562d
1563d
1564d
1565n
1566p
15671
1568
1569
1570t
1571b
1572a
15731
1574w
1575EOF
1576    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1577    if [ $? -ne 0 ]; then
1578        echo "Unable to create a vfat Filesystem on $USBDEVICE" | tee -a $LOGFILE
1579        echo "Make sure your USB device is pluged in" | tee -a $LOGFILE
1580        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1581        MindiExit -1
1582    fi
1583    echo "fdisk build file" >> $LOGFILE
1584    echo "----------------" >> $LOGFILE
1585    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1586    echo "----------------" >> $LOGFILE
1587    rm -f $MINDI_TMP/fdisk.txt
1588    echo "The USB device $USBDEVICE now looks like this:" >> $LOGFILE
1589    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1590    echo -en "."
1591    # Some distro do auto mount at that point (Ubuntu)
1592    echo "Unmounting $USBPART just in case again" >> $LOGFILE
1593    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1594    echo -en "."
1595    echo "Creating a vfat filesystem on $USBPART" >> $LOGFILE
1596    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1597    if [ $? -ne 0 ]; then
1598        echo "Unable to create a vfat filesystem on $USBPART" | tee -a $LOGFILE
1599        echo "Make sure your USB device is pluged in and partitioned ($USBPART must exist on it)" | tee -a $LOGFILE
1600        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1601        MindiExit -1
1602    fi
1603    echo -en "."
1604    echo "Mounting $USBPART on $MINDI_TMP/usb" >> $LOGFILE
1605    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1606    if [ $? -ne 0 ]; then
1607        echo "Unable to mount $USBPART on $MINDI_TMP/usb" | tee -a $LOGFILE
1608        echo "Make sure your USB device is pluged in, partitioned and formated ($USBPART must exist on it)" | tee -a $LOGFILE
1609        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1610        MindiExit -1
1611    fi
1612    echo -en "."
1613    mkdir -p $MINDI_TMP/usb/images
1614    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogIt "OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1615    echo -en "."
1616    echo "mindi_lib = $MINDI_LIB" >> $LOGFILE
1617    for i in memdisk memtest.bin memtest.img ; do
1618        j=$MINDI_LIB/$i
1619        k=$MINDI_TMP/usb
1620        if [ -e "$j" ] ; then
1621            LogIt "Copying $j to $k"
1622            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1623            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1624        fi
1625    done
1626    echo -en "."
1627    MakeMessageFile > $MINDI_TMP/usb/message.txt
1628    echo -en "."
1629    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1630    echo -en "."
1631    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1632    echo -en "."
1633    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1634    echo -en "."
1635    echo "----------- syslinux's conf --------------" |tee -a $LOGFILE
1636    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1637    echo "------------------------------------------" |tee -a $LOGFILE
1638    umount $MINDI_TMP/usb
1639    if [ "$ARCH" != "ia64" ] ; then
1640        syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1641        if [ "$?" -ne "0" ] ; then
1642            echo "----------- syslinux's errors --------------" |tee -a $LOGFILE
1643            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1644            echo "------------------------------------------" |tee -a $LOGFILE
1645            LogIt "Failed to create USB image."
1646        else
1647            echo -e "$DONE"
1648            echo "Created bootable USB image on $USBDEVICE" >> $LOGFILE
1649        fi
1650        rm -f $MINDI_TMP/syslinux.log
1651    else
1652        echo "No USB boot support for ia64" | tee -a $LOGFILE
1653        MindiExit -1
1654    fi
1655}
1656
1657
1658MakeMessageFile() {
1659   
1660    if [ -x "/bin/lsb_release" ]; then
1661        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1662    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors                             
1663        DESC="Arch Linux"                                                                                                           
1664        if [ -r /var/log/pacman.log ]; then                                                                                         
1665            # there are no releases but we can get the last system upgrade                                                     
1666            # Output example:   Arch Linux [2011-03-03 01:39]                                                                   
1667            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"                           
1668        fi
1669    elif [ -r /etc/issue.net ]; then
1670        DESC=`head -1 /etc/issue.net`
1671    elif [ -r /etc/issue ]; then
1672        DESC=`head -1 /etc/issue`
1673    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1674        # For pb >= 0.9.8
1675        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1676    else
1677        DESC="Unknown desc"
1678    fi
1679    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1680    if [ _"$MONDO_SHARE" != _"" ]; then
1681        if [ "$CDRECOVERY" != "yes" ] ; then
1682            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1683                echo -en "Press <enter> to continue.\n"
1684            elif [ ! "$MINDI_TMP" ] ; then
1685                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1686                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1687                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1688                fi
1689            else
1690                echo -en "$BOOT_MEDIA_MESSAGE"
1691            fi
1692        else
1693            echo -en "\
1694To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1695CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1696        fi
1697    fi
1698    echo -en "\n\n\n"
1699}
1700
1701
1702MakeBootConfFile() {
1703    local options i ooo
1704    options=""
1705    # Type of boot file (elilo or syslinux/isolinux)
1706    type=$1
1707    if [ "$type" = "elilo" ]; then
1708        sep="="
1709    else
1710        sep=" "
1711    fi
1712
1713    # Generic header for conf file
1714    if [ "$type" != "elilo" ] ; then
1715        echo -en "prompt 1\ndisplay message.txt\n"
1716    else
1717        echo -en "prompt\n"
1718    fi
1719
1720    # Compute which default option to boot from
1721    if [ "$CDRECOVERY" = "yes" ] ; then
1722        echo -en "default${sep}RESTORE\n"
1723    # In case it's mondoarchive
1724    elif [ _"$MONDO_SHARE" != _"" ]; then
1725        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1726            echo -en "default${sep}iso\n"
1727        else
1728            echo -en "default${sep}interactive\n"
1729        fi
1730    else
1731        echo -en "default${sep}expert\n"
1732    fi
1733
1734    # Handle timeout
1735    if [ "$CDRECOVERY" != "yes" ] ; then
1736        echo -en "timeout${sep}300\n"
1737    else
1738        echo -en "timeout${sep}10000\n"
1739    fi
1740    echo -en "\n"
1741
1742    # prepare which labels will be generated
1743    if [ "$CDRECOVERY" = "yes" ] ; then
1744        options="RESTORE expert"
1745    else
1746        if [ _"$MONDO_SHARE" != _"" ]; then
1747            options="interactive expert compare iso nuke isonuke"
1748        else
1749            options="expert"
1750        fi
1751    fi
1752
1753    # Generate rest of conf file
1754    for i in $options ; do
1755        ooo=$i
1756        [ "$ooo" = "RESTORE" ] && ooo="nuke"
1757        if [ "$type" = "elilo" ]; then
1758            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1759        else
1760            ps="/"
1761            if [ "$type" = "syslinux" ]; then
1762                ps=""
1763            fi
1764            if [ $KERNEL_IS_XEN = "no" ]; then
1765                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1766            else
1767                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1768            fi
1769        fi
1770        echo -en "$outstr"
1771    done
1772    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1773        if [ "$type" = "elilo" ]; then
1774            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1775            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1776        else
1777            ps="/"
1778            if [ "$type" = "syslinux" ]; then
1779                ps=""
1780            fi
1781            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1782            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1783        fi
1784    fi
1785}
1786
1787
1788PrepareBootDiskImage_LILO() {
1789    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1790    imagesdir=$MINDI_CACHE
1791    kernelpath=$1
1792
1793    retval=0
1794    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1795    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1796    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1797    echo -en "..."
1798    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1799    mountpoint=$MINDI_TMP/mountpoint.$$
1800    mkdir -p $mountpoint
1801    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1802    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1803    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1804    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1805    mkdir -p $mountpoint/etc
1806    liloconf=$mountpoint/elilo.conf
1807
1808    MakeBootConfFile elilo > $liloconf
1809
1810    # Copy it so that CD-ROM menu entry is satisfied
1811    mountefi=0
1812    df -T | grep /boot/efi | grep -q vfat
1813    if [ $? -ne 0 ]; then
1814        mount /boot/efi
1815        if [ $? -ne 0 ]; then
1816            echo "You have to mount your EFI partition when using mindi"
1817            MindiExit -1
1818        fi
1819        mountefi=1
1820    fi
1821    el=`find /boot/efi -name elilo.efi`
1822    cp $el $mountpoint
1823    cp $liloconf $mountpoint
1824    if [ $mountefi -eq 1 ]; then
1825        umount /boot/efi 2>&1 > /dev/null
1826    fi
1827
1828    echo "Copying $MINDI_TMP/initrd.img to $mountpoint..." >> $LOGFILE
1829    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1830    if [ "$?" -ne "0" ] ; then
1831        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1832        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1833        LogIt "Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1834        rm -f $MINDI_TMP/mtpt.$$
1835        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1836        retval=$(($retval+1))
1837    fi
1838    MakeMessageFile > $mountpoint/message.txt
1839
1840    mkdir -p $mountpoint/tmp
1841    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1842        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1843    fi
1844
1845    # copy the kernel across
1846    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1847    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1848    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1849    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1850    if [ "$?" -ne "0" ] ; then
1851        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1852        du -sk $mountpoint/* >> $LOGFILE
1853        echo "--- end of list of files ---" >> $LOGFILE
1854        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1855        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1856        cd "$old_pwd"
1857        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1858        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1859    #   losetup /dev/loop0 -d
1860        [ "$imagefile" != "" ] && rm -f $imagefile
1861        LogIt "Sorry, your kernel is too big for your image"
1862        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1863        return 0
1864    fi
1865    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1866    echo "Free space left on image = $free_space KB" >> $LOGFILE
1867    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1868    # make it bootable
1869    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1870    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1871    if [ "$KERN_DISK_MADE" ] ; then
1872        echo "Not running LILO. It's not that kind of disk." >> $LOGFILE
1873    fi
1874
1875    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1876    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1877    echo -en "..."
1878    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1879    if [ "$retval" -eq "0" ] ; then
1880        echo -en "...$DONE\n"
1881        if [ "$KERN_DISK_MADE" ] ; then
1882            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1883        fi
1884    else
1885        echo -en "...failed\n"
1886        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1887        [ "$imagefile" != "" ] && rm -f $imagefile
1888    fi
1889    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1890    return $retval
1891}
1892
1893
1894PrepareBootDiskImage_ISOLINUX() {
1895    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage
1896    imagesdir=$MINDI_CACHE
1897    kernelpath=$1
1898    do_boot_root_thingy=""
1899    local retval old_pwd
1900    retval=0
1901
1902    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
1903    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1904    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1905    echo -en "..."
1906    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
1907    mountpoint=$MINDI_TMP/mountpoint.$$
1908    mkdir -p $mountpoint
1909    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1910    echo "Creating vfat filesystem on $imagefile" >> $LOGFILE
1911    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
1912    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
1913    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
1914
1915    # Only move it now to its final destination and use it now
1916    mv $imagefile $imagesdir
1917    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1918
1919    mount -t vfat -o loop $imagefile $mountpoint || LogIt "Cannot mount (PBDI)"
1920
1921    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1922    MakeMessageFile > $mountpoint/message.txt
1923    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
1924    echo "Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..." >> $LOGFILE
1925    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
1926    if [ "$?" -ne "0" ] ; then
1927        LogIt "Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1928        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1929        LogIt "Please unload some of your modules and try again."
1930        rm -f $MINDI_TMP/mtpt.$$
1931        LogIt "Cannot incorporate initrd.img in bootdisk (kernel / modules too big?). Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1932        retval=$(($retval+1))
1933    fi
1934
1935    mkdir -p $mountpoint/tmp
1936    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1937        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1938    fi
1939
1940    # copy the kernel across
1941    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1942    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1943    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1944         
1945    retval=0
1946    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
1947    retval=$?
1948    if [ $KERNEL_IS_XEN = "yes" ]; then
1949        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
1950        let retval+=$?
1951    fi
1952 
1953    if [ "$retval" -ne "0" ] ; then
1954        echo "Files at mountpoint ($mountpoint) :-" >> $LOGFILE
1955        du -sk $mountpoint/* >> $LOGFILE
1956        echo "--- end of list of files ---" >> $LOGFILE
1957        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1958        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1959        cd "$old_pwd"
1960        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1961        rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1962
1963        LogIt "Sorry, your kernel is too big for your image"
1964        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1965    fi
1966    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1967    echo "Free space left on image = $free_space KB" >> $LOGFILE
1968    echo "Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K" >> $LOGFILE
1969
1970    # make it bootable
1971    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1972    mkdir -p $mountpoint/etc
1973    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1974    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1975    echo -en "..."
1976    rmdir $mountpoint || LogIt "Cannot rmdir (PBDI)"
1977
1978    if [ "$retval" -eq "0" ] ; then
1979        echo -en "...$DONE\n"
1980        if [ "$KERN_DISK_MADE" ] ; then
1981            [ "$imagefile" != "" ] && rm -f $imagefile
1982            LogIt "$BOOT_SIZE KB boot disks were created OK\n"
1983        fi
1984    else
1985        echo -en "...failed\n"
1986        LogIt $BOOT_SIZE"KB boot disk was NOT created\n"
1987        [ "$imagefile" != "" ] && rm -f $imagefile
1988    fi
1989    [ "$retval" -ne "0" ] && LogIt "PrepareBootDiskImage() is returning nonzero"
1990    return $retval
1991}
1992
1993
1994ParseModprobeForIncludes() {
1995local MODPROBE_CONF mpincfile includes include
1996
1997MODPROBE_CONF=/etc/modprobe.conf
1998mpincfile=$1
1999touch $mpincfile
2000if [ -a $MODPROBE_CONF ]; then
2001    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2002    if [ -n "$includes" ]; then
2003        for include in $includes
2004        do
2005            if [ -a "$include" ]; then
2006                echo $include >> $mpincfile
2007            fi
2008        done
2009    fi
2010fi
2011}
2012
2013
2014PrepareDataDiskImages() {
2015    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2016
2017    imagesdir=$MINDI_CACHE
2018    rm -f $imagesdir/mindi.iso
2019    needlist=$MINDI_TMP/what-we-need.txt
2020    bigdir=$MINDI_TMP/bigdir
2021    mkdir -p $bigdir/usr/bin
2022    mkdir -p $bigdir/usr/sbin
2023    includefile=$MINDI_TMP/$$.includefile.txt
2024
2025    if [ -e "$DEPLIST_FILE" ]; then
2026        lfiles="$DEPLIST_FILE $DEPLIST_DIR/*"
2027    else
2028        lfiles="$DEPLIST_DIR/*"
2029    fi
2030    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2031    ParseModprobeForIncludes $includefile
2032    lines=$(($lines+`cat $includefile | wc -l`))
2033    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2034    res=$?
2035    rm -f $includefile
2036    if [ "$YOUR_KERNEL_SUCKS" ]; then
2037        pwd=`pwd`
2038        cd "$MINDI_TMP"
2039        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2040            tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2041        done
2042        for i in $EXTRA_MODS ; do
2043            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2044            [ ! "$j" ] && echo "WARNING - cannot find failsafe module $i.o.gz" >> $LOGFILE
2045            for k in $j ; do
2046                tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR on module $k" $MINDI_TMP/$$.log
2047                echo "Added failsafe module $k to ramdisk" >> $LOGFILE
2048            done
2049        done
2050        cd "$pwd"
2051    else
2052        ListKernelModulePaths >> $needlist
2053    fi
2054    if [ "$res" -ne "0" ] ; then
2055        Die "You have $res files present in dependency list\nbut absent from filesystem."
2056    fi
2057    FindAndAddUserKeyboardMappingFile
2058    mkdir -p $bigdir/tmp
2059    if [ _"$MONDO_SHARE" != _"" ]; then
2060        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2061        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2062    fi
2063    [ -d "/mnt/.boot.d" ] && echo "Oh Jebus" > $bigdir/tmp/DUMBASS-GENTOO
2064    DropOptimizedLibraries $needlist $bigdir
2065    echo -en "Assembling dependency files"
2066    CopyDependenciesToDirectory < $needlist $bigdir
2067
2068    # also copy io.sys and msdos.sys, if we can find them
2069    for i in `mount | cut -d' ' -f3` ; do
2070        for j in io.sys msdos.sys ; do
2071            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2072        done
2073    done
2074
2075    # master boot record, too
2076    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2077    if [ "$i" ] ; then
2078        LogIt "Backing up $i's MBR"
2079        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2080        sleep 1
2081        sync
2082        j=$i
2083        [ -h "$j" ] && j=`readlink -f $j`
2084        LogIt "Creating /dev/boot_device ($j)"
2085        mkdir -p $bigdir/dev
2086        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2087    fi
2088
2089    old_pwd=`pwd`
2090    cd "$bigdir"
2091
2092    # Get terminfo content
2093    ti="usr/share/terminfo/l"
2094    if [ -d /$ti ]; then
2095        mkdir -p $ti
2096        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogIt "WARNING - error occurred while copying terminfo"
2097    fi
2098    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2099        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2100        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2101    fi
2102    if [ -d "/lib/dev-state" ]; then 
2103        tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2104    fi
2105    cd "$old_pwd"
2106    echo -e "$DONE"
2107    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2108    MakeMountlist $MINDI_TMP/mountlist.txt
2109    CheckMountlist $MINDI_TMP/mountlist.txt
2110    mkdir -p $bigdir/tmp
2111    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2112    if [ _"$MONDO_SHARE" != _"" ]; then
2113        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2114    fi
2115    if [ $LVM != "false" ]; then
2116        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2117        if [ "$?" -ne "0" ]; then
2118            LVM="false"
2119            rm -f $bigdir/tmp/i-want-my-lvm
2120        else
2121            echo "Your i-want-my-lvm file content is:" >> $LOGFILE
2122            echo "-----------------------------------" >> $LOGFILE
2123            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2124            echo "-----------------------------------" >> $LOGFILE
2125        fi
2126    fi
2127    echo "Your mountlist.txt file content is:" >> $LOGFILE
2128    echo "-----------------------------------" >> $LOGFILE
2129    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2130    echo "-----------------------------------" >> $LOGFILE
2131
2132    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2133    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2134    if [ _"$MONDO_SHARE" != _"" ]; then
2135        for q in filelist.full.gz biggielist.txt ; do
2136            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2137            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2138        done
2139    fi
2140
2141    echo -en "Tarring and zipping the data content..."
2142    size_of_all_tools=`du -sk $bigdir | cut -f1`
2143    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogIt "Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2144    du -sk $imagesdir/*gz >> $LOGFILE
2145    echo -e "$DONE"
2146
2147    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2148    rm -rf $bigdir
2149    rm -f $needlist
2150}
2151
2152
2153ProcessLDD() {
2154    local incoming f d nd bd bnd
2155    read incoming
2156    while [ "$incoming" != "" ]; do
2157        # We take the full path name of the dyn. lib. we want
2158        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2159        for f in $incoming ; do
2160            # echo modified file name if one of the parent dir is a link
2161            # by replacing the original dirname by the destination of the link
2162            d="`dirname $f`"
2163            found="false"
2164            while [ "$d" != "/" ]; do
2165                if [ -h "$d" ]; then
2166                    nd=`readlink -f $d`
2167                    bd=`basename $d`
2168                    bnd=`basename $nd`
2169                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2170                    echo $d
2171                fi
2172                d="`dirname $d`"
2173            done
2174
2175            echo "$f"
2176            echo "`ReadAllLink $f`"
2177        done
2178        read incoming
2179    done
2180}
2181
2182
2183Prompt() {
2184    echo -en "$1"
2185    read line
2186}
2187
2188
2189ReadLine() {
2190    local i incoming
2191    read incoming
2192    i=0
2193    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2194        i=$(($i+1))
2195        read incoming
2196    done
2197    echo "$incoming"
2198}
2199
2200
2201SizeOfPartition() {
2202    local devpath drive res stub
2203    device=$1
2204    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2205        Die "Cannot find $device's size - is your /etc/fstab sane?"
2206    fi
2207    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2208        res=`SizeOfRaidPartition $device`
2209        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2210        echo "$res"
2211        return 0
2212    fi
2213    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2214    res=`$FDISK -s $device 2>> $LOGFILE`
2215    # end patch
2216    # take only the first in case of multiple mount (cifs, nfs, ...)
2217    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2218    [ "$res" = "" ] && res="-1"
2219    echo $res
2220    return 0
2221}
2222
2223
2224SizeOfRaidPartition() {
2225    local real_dev smallest_size silly tmp
2226
2227    silly=999999999
2228    smallest_size=$silly
2229
2230    for real_dev in `GetRaidDevMembers $1` ; do
2231        tmp=`SizeOfPartition $real_dev`
2232        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2233    done
2234
2235    if [ "$smallest_size" = "$silly" ] ; then
2236        echo "-1"
2237        return 1
2238    else
2239        echo "$smallest_size"
2240        return 0
2241    fi
2242}
2243
2244
2245StripComments()
2246{
2247    local tempfile
2248
2249    tempfile=$MINDI_TMP/$$.strip.txt
2250    cp -f $1 $tempfile 2>> $LOGFILE
2251    $AWK '{if (substr($0,0,1)!="#" || substr($0,0,3)=="#!/") {print $0;};}' $tempfile > $1
2252    rm -f $tempfile
2253    echo "Stripped comments from $2" >> $LOGFILE
2254}
2255
2256
2257
2258StripExecutable()
2259{
2260    local tmpfile
2261
2262    tmpfile=$MINDI_TMP/stripped.$$.dat
2263    [ -d "$1" ] || [ -h "$1" ] && return
2264    cp -f $1 $tmpfile 2>> $LOGFILE
2265    strip $tmpfile 2> /dev/null
2266    if [ "$?" -eq "0" ] ; then
2267        cp -f $tmpfile $1 2>> $LOGFILE
2268        echo "Stripped binary $2" >> $LOGFILE
2269    fi
2270    rm -f $tmpfile
2271}
2272
2273KernelVer() {
2274        local fkern_ver fname
2275
2276        fname=$1
2277        file $fname | grep -q gzip
2278        if [ "$?" -eq "0" ] ; then
2279            # Used by ia64
2280            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2281        else
2282            fkern_ver=`strings $fname 2> /dev/null | grep "[2-9]+*[.][0-9]+*[.][0-9]+*[^\@]*@"`
2283        fi
2284        echo "$fkern_ver"
2285}
2286
2287
2288# WARNING: This function should just echo the final result !!!
2289#
2290TryToFindKernelPath() {
2291    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2292
2293    we_want_version=$KERVERRUN
2294    possible_kernels=""
2295    duff_kernels=""
2296    output=""
2297   
2298    if [ "$ARCH" = "ia64" ] ; then
2299       root="/boot/efi/efi"
2300    else
2301       root="/"
2302    fi
2303    # See if we're booted from a Xen kernel
2304    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2305    if [ -f /proc/xen/capabilities ]; then
2306        # It's a Xen kernel
2307        KERNEL_IS_XEN="yes"
2308        LogFile "It's a Xen kernel..."
2309    fi
2310
2311    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/'` ; do
2312        [ ! -e "$fname" ] && continue
2313        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2314        fkern_ver=`KernelVer $fname`
2315        [ "$fkern_ver" = "" ] && continue
2316        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2317        [ -f "$fname" ] || continue
2318        [ -h "$fname" ] && continue
2319        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2320        file $fname | grep -q gzip
2321        if [ "$?" -eq "0" ] ; then
2322            # Used by ia64
2323            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2324                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2325                duff_kernels="$fname $duff_kernels"
2326            else
2327                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2328                possible_kernels="$fname $possible_kernels"
2329            fi
2330        else
2331            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2332                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2333                duff_kernels="$fname $duff_kernels"
2334            else
2335                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2336                possible_kernels="$fname $possible_kernels"
2337            fi
2338        fi
2339    done
2340    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2341        possible_kernels=`find /boot/vmlinuz-2.* | tail -n1`
2342    fi
2343    if [ ! "$possible_kernels" ] ; then
2344        LogFile "No kernel matches exactly. Are there any duff kernels?"
2345        possible_kernels="$duff_kernels"
2346        if [ ! "$possible_kernels" ] ; then
2347            LogFile "Sorry, no duff kernels either"
2348        else
2349            LogFile "I bet you're running Debian or Gentoo, aren't you?"
2350            LogFile "Your kernel doesn't have a sane builddate. Oh well..."
2351        fi
2352    fi
2353    if [ $KERNEL_IS_XEN = "yes" ]; then
2354        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2355        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2356        FindMboot32Binary
2357    fi
2358    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2359    noof_kernels=`CountItemsIn "$possible_kernels"`
2360    if [ "$noof_kernels" -eq "0" ] ; then
2361        LogFile "Could not find your kernel."
2362        if [ -e "/boot/vmlinuz" ] ; then
2363            LogFile "Using /boot/vmlinuz as a last resort."
2364            output=/boot/vmlinuz
2365        else
2366            output=""
2367        fi
2368    elif [ "$noof_kernels" -eq "1" ] ; then
2369        kp=`echo "$possible_kernels" | sed s/' '//`
2370        LogFile "Your kernel is $kp (v$KERVERRUN)"
2371        output="$kp"
2372    else
2373        for i in $possible_kernels ; do
2374            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2375                LogFile "OK, I used my initiative and found that "
2376                LogFile "$i is probably your kernel. "
2377                output="$i"
2378                break
2379            fi
2380        done
2381        if [ ! -n "$output" ]; then
2382            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2383                output=/boot/vmlinuz
2384                LogFile "Schlomo, this one's for you."
2385            else
2386                LogFile "Two or more possible kernels found. You may specify any one of them and the "
2387                LogFile "boot disks will still work, probably. If one does not work, try another."
2388                LogFile "$possible_kernels"
2389                output=""
2390            fi
2391        fi
2392    fi
2393    if [ $KERNEL_IS_XEN = "yes" ]; then
2394        if [ "$noof_xenkernels" -eq "0" ]; then
2395            xenkernelpath=""
2396        elif [ "$noof_xenkernels" -eq "1" ]; then
2397            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2398            LogFile "Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2399        else
2400            for i in $possible_xenkernels ; do
2401                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2402                    LogFile "OK, I used my initiative and found that "
2403                    LogFile "$i is probably your Xen kernel. "
2404                    xenkernelpath="$i"
2405                    break
2406                fi
2407            done
2408            if [ ! -n "$xenkernelpath" ]; then
2409                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2410                if [ ! -n "$new_possible_xenkernels" ]; then
2411                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2412                    LogFile "Using $xenkernelpath"
2413                else
2414                    LogFile "Two or more possible Xen kernels found. You may specify any one of them and the "
2415                    LogFile "boot disks will still work, probably. If one does not work, try another."
2416                    LogFile "$possible_xenkernels"
2417                    output=""
2418                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2419                    LogFile "Using $xenkernelpath"
2420                fi
2421            fi
2422        fi
2423        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2424            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2425        fi
2426    fi
2427    LogAll "TryToFindKernelPath found $output"
2428    echo "$output"
2429}
2430
2431
2432TurnTgzIntoRdz() {
2433    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path
2434
2435    tgz_dir_fname=$1
2436    rdz_fname=$2
2437    kernelsize=$3
2438    maxsize=$(($BOOT_SIZE-$kernelsize))
2439    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2440    tempfile=$MINDI_TMP/temp.rd
2441    mountpoint=$MINDI_TMP/mnt1
2442    res=0
2443    echo -en "..."
2444    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2445    echo -en "..."
2446    echo "Creating ext2 filesystem on $tempfile" >> $LOGFILE
2447    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2448    echo -en "..."
2449    mkdir -p $mountpoint
2450    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2451    echo -en "..."
2452    old_pwd=`pwd`
2453    cd "$mountpoint"
2454
2455    # AL04Oct08: Check whether /lib64 is a link and if so explicitly create one in rootfs
2456    if [ -h "/lib64" ]; then
2457        mkdir -p lib || LogIt "Unable to create lib in $mountpoint."
2458        ln -s lib lib64 || LogIt "/lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2459    fi
2460
2461    cp -Rdf $tgz_dir_fname/* . 2>&1 >> $LOGFILE
2462    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2463
2464    cd dev || Die "Can't cd to dev"
2465    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2466    rm -f dev-entries.tgz
2467    cd ..
2468
2469    for w in insmod.static insmod.static.old ; do
2470        s=`which $w 2> /dev/null`
2471        if [ -e "$s" ] ; then
2472            tar cf - -C / $s 2> /dev/null | tar xf -
2473        fi
2474    done
2475
2476    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2477
2478    # Handle the case where busybox and mount are dynamically linked
2479    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2480    if [ $? -eq 0 ]; then
2481        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2482        rm -f bin/mount $MINDI_TMP/busy.lis
2483        mountlis=`grep -E "mount|fuse|ssh" $DEPLIST_FILE $DEPLIST_DIR/* | grep -v " *#.*" | cut -d: -f2 | sort -u`
2484        LocateDeps $MINDI_LIB/rootfs/bin/busybox $mountlis >> $MINDI_TMP/busy.lis
2485        # Special for libs
2486        for f in `grep -E "libnss" $DEPLIST_FILE $DEPLIST_DIR/* | grep -v " *#.*" | cut -d: -f2`; do
2487            echo "`ReadAllLink $f`" >> $MINDI_TMP/busy.lis
2488        done
2489        # Initial / are trucated by tar
2490        tar cf - $mountlis `sort -u $MINDI_TMP/busy.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "Problem in mount analysis" $MINDI_TMP/$$.log
2491        rm -f $MINDI_TMP/busy.lis
2492    fi
2493
2494    # Copy of files mandatory for ssh to automate mount if sshfs is used
2495    mkdir $mountpoint/.ssh
2496    cp -rp ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2497    echo > $mountpoint/tmp/myssh << EOF
2498ssh -o StrictHostKeyChecking=no $*
2499EOF
2500    chmod 755 $mountpoint/tmp/myssh
2501
2502    # Copy of files mandatory for ld.so
2503    cp -rp /etc/ld.so.c* $mountpoint/etc
2504
2505    # Avoid an issue on some distro (RHEL5)
2506    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2507
2508    mkdir -p $mountpoint/tmp
2509    # Management of udev (which includes modprobe in rules)
2510    ps auxww | grep -v grep | grep -qw udevd
2511    if [ $? -eq 0 ]; then
2512        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2513        LogIt "udev device manager found"
2514        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2515        # This avoids NIC remapping if on another machine at restore time on Debian at least
2516        rm -f ./etc/udev/rules.d/z[0-9][0-9]_persistent-net.rules
2517        # This avoids NIC remapping if on another machine at restore time on Ubuntu at least
2518        rm -f ./etc/udev/rules.d/[0-9][0-9]-persistent-net.rules
2519        # Do not do it if it's a link (Ubuntu 64 bits #503)
2520        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [  ! -h "/lib64/udev" ]; then
2521            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2522        fi
2523        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2524            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2525        fi
2526        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2527            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2528        fi
2529        if [ -x /sbin/udevd ]; then
2530            lis2=`grep -Ev '^#' $MINDI_CONF/udev.files` 
2531            lis=""
2532            # Get only the files which exist in that list
2533            # and potentially their symlink structure
2534            for i in $lis2; do
2535                if [ -h $i ]; then
2536                    j=$i
2537                    while [ -h $j ]; do
2538                        lis="$lis $j"
2539                        j=`readlink $j`
2540                    done
2541                    lis="$lis $j"
2542                elif [ -f $i ]; then
2543                    lis="$lis $i"
2544                fi
2545            done
2546            # And their deps
2547            LocateDeps $lis > $MINDI_TMP/udev.lis
2548            for i in $lis; do
2549                if [ "`echo $i | cut -c1`" = "/" ]; then
2550                    j=`echo $i | cut -c2-`
2551                    [ "$j" != "" ] && rm -f $j
2552                fi
2553            done
2554            tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "Problem in udev.lis analysis" $MINDI_TMP/$$.log
2555            rm -f $MINDI_TMP/udev.lis
2556        else
2557            echo "udevd daemon not in standard place (/sbin)" 2>&1 | tee -a $LOGFILE
2558            echo "mindi will use static devices which may cause problems" 2>&1 | tee -a $LOGFILE
2559            rm -f $mountpoint/tmp/USE-UDEV
2560        fi
2561    fi
2562
2563    # Management of potential HW info (ProLiant only at the moment)
2564    rm -rf $MINDI_CACHE/bkphw
2565    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2566    if [ -d $MINDI_CACHE/bkphw ]; then
2567        LogIt "Hardware Information found and saved ..."
2568        cp -rp $MINDI_CACHE/bkphw .
2569        if [ -f $MINDI_CACHE/tools.files ]; then
2570            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2571            LocateDeps $lis > $MINDI_TMP/tools.lis
2572            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "Problem in tools.lis analysis" $MINDI_TMP/$$.log
2573        fi
2574        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2575            mv -f $MINDI_CACHE/mindi-rsthw .
2576            chmod 755 ./mindi-rsthw
2577        fi
2578        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2579    fi
2580
2581    # Management of perl scripts delivered needed at restore time
2582    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2583    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "Problem in perl scripts analysis" $MINDI_TMP/$$.log
2584
2585    for w in cdrom groovy-stuff ; do
2586        mkdir -p mnt/$w
2587    done
2588
2589    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "Problem in fd dev analysis" $MINDI_TMP/$$.log
2590
2591    cd "$old_pwd"
2592    echo -en "..."
2593    old_pwd=`pwd`
2594    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2595        cd "$MINDI_TMP"
2596        needed_modules_path=lib/modules/$FAILSAFE_KVER
2597    else
2598        cd /
2599        if [ "${kernelname}" != "" ]
2600        then
2601            needed_modules_path=lib/modules/${kernelname}
2602        else
2603            needed_modules_path=lib/modules/$KERVERRUN
2604        fi
2605    fi
2606
2607    needed_modules=""
2608    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2609
2610    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2611        # For PXE boot
2612        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2613    fi
2614    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2615        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2616    fi
2617    for i in $DENY_MODS; do
2618        echo "Removing $i from the list of modules to load" >> $LOGFILE
2619        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2620    done
2621
2622    [ -e "$needed_modules_path" ] || LogIt "path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2623    for i in $list_of_groovy_mods ; do
2624        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2625    done
2626
2627    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2628        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2629        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2630        echo "Adding $i ($s KB) to the rootfs" >> $LOGFILE
2631        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2632        # Uncompress modules if not using udev and native modprobe
2633        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2634            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2635                echo "Uncompressing $i" >> $LOGFILE
2636                gunzip -f $mountpoint/$i
2637            fi
2638        fi
2639    done
2640
2641    # Also copy modules.dep in case of udev so that normal modprobe works
2642    tar cf - -C / /$needed_modules_path/modules.dep 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "Unable to copy modules.dep to $mountpoint" $MINDI_TMP/$$.log
2643
2644    # Copy FW in case some drivers needs it
2645    if [ -d "/lib/firmware" ]; then
2646        cp -rp /lib/firmware $mountpoint/lib
2647    fi
2648
2649    # Copy an additional ProLiant tool for OBDR support
2650    if [ -f $MINDI_TMP/OBDR ]; then
2651        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2652            mkdir -p $mountpoint/usr/bin
2653            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2654            LogIt "Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved OBDR support"
2655        else
2656            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode tool"
2657            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2658        fi
2659    fi
2660
2661    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2662        echo "Deleting devfsd daemon from ramdisk" >> $LOGFILE
2663        [ ! -e "/sbin/devfsd" ] && echo "...because /sbin/devfsd not found" >> $LOGFILE
2664        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && echo "...because kernel is failsafe" >> $LOGFILE
2665        rm -f $mountpoint/sbin/devfsd
2666    fi
2667    cd "$old_pwd"
2668    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2669    dd if=/dev/zero of=$mountpoint/zero &> /dev/null
2670    rm -f $mountpoint/zero
2671    if [ _"$MONDO_SHARE" != _"" ]; then
2672        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2673        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2674        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2675        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2676        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2677        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2678        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2679        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2680        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2681    fi
2682    mkdir -p $mountpoint/proc
2683    echo "---------------------------" >> $LOGFILE
2684    echo "Content of initial ramdisk:" >> $LOGFILE
2685    echo "---------------------------" >> $LOGFILE
2686    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2687    echo "---------------------------" >> $LOGFILE
2688
2689    # Determine what filesystem to use for initrd image
2690    echo "Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd." >> $LOGFILE
2691    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2692    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2693    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ]; then
2694        # say what will be used
2695        echo "Creating an $gvFileSystem initrd image..." >> $LOGFILE
2696        # kernel expects linuxrc in ext2 filesystem
2697        ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2698        # unmount loop filesystem and create image file using the standard approach
2699        umount $mountpoint || Die "Cannot unmount $tempfile"
2700        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2701        bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2702        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2703        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2704        rm -f ${rdz_fname}.tmp
2705        # log that we are done
2706        echo "...done." >> $LOGFILE
2707    elif [ "$gvFileSystem" = "initramfs" ]; then
2708        # say what will be used
2709        echo "Creating a gzip'ed cpio (AKA initramfs) initrd image..." >> $LOGFILE
2710        # make sure that cpio is there
2711        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2712        # go into filesystem
2713        cd "$mountpoint"
2714        # kernel expects init in cpio filesystem
2715        ln -sf sbin/init init
2716        # create cpio image file and unmount loop filesystem
2717        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2718        cd "$old_pwd"
2719        umount $mountpoint || Die "Cannot unmount $tempfile"
2720        # log that we are done
2721        echo "...done." >> $LOGFILE
2722    else
2723        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2724    fi
2725
2726    if [ "$res" -eq "0" ] ; then
2727        echo -en "..."
2728    else
2729        echo -en "\rMade an rdz WITH ERRORS.           \n"
2730    fi
2731    return 0
2732}
2733
2734
2735##############################################################################
2736#----------------------------------- Main -----------------------------------#
2737##############################################################################
2738
2739# Now we can create what we need
2740mkdir -p $MINDI_TMP
2741
2742# Purge from potential old run
2743if [ _"$MINDI_CACHE" = _"" ]; then
2744    Die "MINDI_CACHE undefined"
2745fi
2746
2747if [ "$1" = "--printvar" ] ; then
2748    shift
2749    if [ _"$1" != _"" ] ; then
2750        set | grep -Ew "^$1" | cut -d= -f2
2751    fi
2752    exit 0
2753fi
2754
2755> $LOGFILE
2756echo "mindi v$MINDI_VERSION" >> $LOGFILE
2757echo "$ARCH architecture detected" >> $LOGFILE
2758echo "mindi called with the following arguments:" >> $LOGFILE
2759echo "$@" >> $LOGFILE
2760echo "Start date : `date`" >> $LOGFILE
2761echo "-----------------------------" >> $LOGFILE
2762
2763[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && ln -sf /sbin/mkdosfs /sbin/mkfs.vfat
2764
2765# Log some capital variables
2766[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2767echo "MONDO_SHARE = $MONDO_SHARE" >> $LOGFILE
2768echo "MINDI_LIB = $MINDI_LIB" >> $LOGFILE
2769echo "MINDI_SBIN = $MINDI_SBIN" >> $LOGFILE
2770[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2771echo "MINDI_CONF = $MINDI_CONF" >> $LOGFILE
2772if [ -f $MINDI_CONFIG ]; then
2773    echo "-----------------------------" >> $LOGFILE
2774    echo " Mindi configuration file    " >> $LOGFILE
2775    echo "-----------------------------" >> $LOGFILE
2776    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2777    echo "-----------------------------" >> $LOGFILE
2778fi
2779
2780
2781trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2782
2783# Sanity checks
2784which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2785which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2786which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2787which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2788if which awk &> /dev/null ; then
2789    if ! which gawk &> /dev/null ; then
2790        LogIt "You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
2791    fi
2792fi
2793which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
2794[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
2795
2796[ "`echo $KERVERRUN | grep "2.4.[0-6]" | grep -v "2.4.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
2797
2798# Update the PATH variable if incomplete
2799if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
2800    PATH=$PATH:/sbin:/usr/sbin
2801    export PATH
2802    echo "Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily." >> $LOGFILE
2803    echo "However, you may wish to ask your vendor to provide a permanent fix..." >> $LOGFILE
2804    echo " Or you might like to call 'su -' instead of 'su', for example." >> $LOGFILE
2805fi
2806
2807# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
2808if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
2809    source $MINDI_LIB/FindDistroFailsafe
2810    # Log kernel image
2811    LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
2812else
2813    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
2814fi
2815
2816if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
2817    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
2818fi
2819
2820### BERLIOS
2821### Fix as it's not mandatory on ia64
2822if [ "$ARCH" = "ia64" ] ; then
2823    if which elilo &> /dev/null ; then
2824        LILO_EXE=elilo
2825    else
2826        LILO_EXE=`which false 2> /dev/null`
2827    fi
2828else
2829    FindIsolinuxBinary
2830fi
2831trap "Aborted" SIGTERM
2832DONE="\r\t\t\t\t\t\t\t\tDone.         "
2833kernelpath=""
2834MONDO_ROOT=/var/cache/mondo
2835mkdir -p $MONDO_ROOT
2836
2837if [ -d "/proc/lvm" ]; then
2838    # LVM v1
2839    LVMCMD=""
2840    LVM="v1"
2841elif [ -d "/dev/mapper" ]; then
2842    # LVM v2
2843    LVMCMD="lvm"
2844    LVM="v2"
2845else
2846    LVM="false"
2847fi
2848echo "LVM set to $LVM" >> $LOGFILE
2849echo "----------" >> $LOGFILE
2850echo "mount result:" >> $LOGFILE
2851echo "-------------" >> $LOGFILE
2852mount >> $LOGFILE
2853echo "-------------" >> $LOGFILE
2854if [ -e /etc/raidtab ]; then
2855    echo "-------------" >> $LOGFILE
2856    echo "/etc/raidtab content:" >> $LOGFILE
2857    echo "-------------" >> $LOGFILE
2858    cat /etc/raidtab >> $LOGFILE
2859fi
2860echo "-------------" >> $LOGFILE
2861echo "cat /proc/cmdline:" >> $LOGFILE
2862echo "-------------" >> $LOGFILE
2863cat /proc/cmdline >> $LOGFILE
2864echo "-------------" >> $LOGFILE
2865echo "cat /proc/swaps:" >> $LOGFILE
2866echo "-------------" >> $LOGFILE
2867cat /proc/swaps >> $LOGFILE
2868echo "-------------" >> $LOGFILE
2869echo "cat /proc/partitions:" >> $LOGFILE
2870echo "-------------" >> $LOGFILE
2871cat /proc/partitions >> $LOGFILE
2872echo "-------------" >> $LOGFILE
2873echo "cat /proc/filesystems:" >> $LOGFILE
2874echo "-------------" >> $LOGFILE
2875cat /proc/filesystems >> $LOGFILE
2876echo "-------------" >> $LOGFILE
2877echo "lsmod result:" >> $LOGFILE
2878echo "-------------" >> $LOGFILE
2879lsmod >> $LOGFILE
2880MODULES="`cat /proc/modules | $AWK '{print $1}'`"
2881if [ -x /usr/sbin/esxcfg-module ]; then
2882    echo "-------------" >> $LOGFILE
2883    echo "VMWare ESX server detected - Enabling dedicated support" >> $LOGFILE
2884    echo "-------------" >> $LOGFILE
2885    echo "VMWare modules" >> $LOGFILE
2886    echo "-------------" >> $LOGFILE
2887    /usr/sbin/esxcfg-module -l >> $LOGFILE
2888    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
2889fi
2890echo "FORCE_MODS:" >> $LOGFILE
2891echo "-------------" >> $LOGFILE
2892echo $FORCE_MODS >> $LOGFILE
2893echo "-------------" >> $LOGFILE
2894echo "DENY_MODS:" >> $LOGFILE
2895echo "-------------" >> $LOGFILE
2896echo $DENY_MODS >> $LOGFILE
2897echo "-------------" >> $LOGFILE
2898echo "df result:" >> $LOGFILE
2899echo "----------" >> $LOGFILE
2900df -T >> $LOGFILE
2901echo "-------------" >> $LOGFILE
2902echo "Liste of extra modules is:" >> $LOGFILE
2903echo "$EXTRA_MODS" >> $LOGFILE
2904echo "-------------" >> $LOGFILE
2905
2906# Compute libata version
2907laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
2908# If libata v2 is used then remove ide-generic as it will perturbate boot
2909if [ "`echo $MODULES | grep libata`" ]; then
2910    if [ "$laver" = "2" ]; then
2911        DENY_MODS="$DENY_MODS ide-generic"
2912        echo "ide-generic removed from module list as your system uses libata v2+" >> $LOGFILE
2913        echo "-------------" >> $LOGFILE
2914    fi
2915fi
2916
2917# Check for ISO_CMD command
2918if [ ! -x $ISO_CMD ]; then
2919    echo "NOTE: No CD image (ISO file) utility found" >> $LOGFILE
2920fi
2921
2922FLOPPY_WAS_MOUNTED=""
2923for mtpt in /media/floppy /mnt/floppy /floppy ; do
2924    if mount | grep -w $mtpt &> /dev/null ; then
2925        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
2926        umount $mtpt
2927    fi
2928done
2929
2930#
2931# If we have a USB device we need to store info
2932# and remove it from the parameters line
2933#
2934if [ "$#" -ne "0" ] ; then
2935    if [ "$1" = "--usb" ] ; then
2936        shift
2937        USBDEVICE=$1
2938        if [ _"$USBDEVICE" = _"" ]; then
2939            Die "No USB device specified"
2940        fi
2941        shift
2942    fi
2943fi
2944
2945if [ "$#" -ne "0" ] ; then
2946    if [ "$1" = "--findkernel" ] ; then
2947        resk=`TryToFindKernelPath`
2948        # Avoids logfile content for mondo
2949        export MONDO_SHARE=""
2950        if [ "$resk" = "" ] ; then
2951            if [ $KERNEL_IS_XEN = "yes" ]; then
2952                echo "$xenkernelpath"
2953                LogOnly "xenkernelpath = $xenkernelpath"
2954                MindiExit 0
2955            else
2956                MindiExit -1
2957            fi
2958        else
2959            echo "$resk"
2960            LogOnly "kernelpath = $resk"
2961            MindiExit 0
2962        fi
2963    elif [ "$1" = "--locatedeps" ] ; then
2964        [ ! "$2" ] && Die "Please specify the binary to look at"
2965        LocateDeps $*
2966        # Avoids logfile content for mondo
2967        export MONDO_SHARE=""
2968        MindiExit $?
2969    elif [ "$1" = "--readalllink" ] ; then
2970        [ ! "$2" ] && Die "Please specify the binary to look at"
2971        ReadAllLink $2
2972        # Avoids logfile content for mondo
2973        export MONDO_SHARE=""
2974        MindiExit $?
2975    elif [ "$1" = "--makemessage" ] ; then
2976        MakeMessageFile
2977        MindiExit 0
2978    elif [ "$1" = "--makemountlist" ] ; then
2979        [ ! "$2" ] && Die "Please specify the output file"
2980        MakeMountlist $2
2981        CheckMountlist $2
2982        # Avoids logfile content for mondo
2983        export MONDO_SHARE=""
2984        MindiExit $?
2985    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
2986        echo "Mindi v$MINDI_VERSION"
2987        # Avoids logfile content for mondo
2988        export MONDO_SHARE=""
2989        MindiExit 0
2990    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
2991        MONDO_TMP=$2
2992        # Change MINDI_TMP for the one provided by mondo
2993        # So that it can get back the built files
2994        if [ _"$MONDO_TMP" = _"" ]; then
2995            Die "MONDO_TMP is empty, aborting"
2996        fi
2997        if [ _"$MONDO_TMP" = _"/" ]; then
2998            Die "MONDO_TMP is /, aborting"
2999        fi
3000        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3001        rmdir $MINDI_TMP
3002        export MINDI_TMP=$MONDO_TMP
3003        mkdir -p $MINDI_TMP
3004
3005        # This is the scratch dir in mondo - subdir images
3006        MINDI_CACHE=$3
3007
3008        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3009        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3010       
3011###
3012### Sq-Modification...
3013### Attempt to locate kernel specific module path
3014### if module path is found then use it other wise use uname -r to set it...
3015###
3016        if [ $KERNEL_IS_XEN = "yes" ]; then
3017            LogIt "xenkernelpath = $xenkernelpath"
3018        fi
3019        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3020        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3021        then
3022           LogIt "Module path for ${kernelpath} not found..."
3023           LogIt "using running kernel\'s modules."
3024           kernelname=$KERVERRUN
3025        fi
3026        LogIt "kernelname = $kernelname"
3027        LogIt "kernelpath = $kernelpath"
3028###
3029### end of Sq-Modification
3030###
3031        TAPEDEV=$5
3032        TAPESIZE=$6
3033        FILES_IN_FILELIST=$7
3034        USE_LZO=$8
3035        CDRECOVERY=$9
3036        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3037            IMAGE_DEVS=""
3038        else
3039            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3040        fi
3041        if [ "${11}" ] ; then
3042            LILO_OPTIONS=""
3043    #       LogIt "LILO will use conservative settings, to be compatible with older BIOSes."
3044        fi
3045        LAST_FILELIST_NUMBER=${12}
3046        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3047        export MINDI_EXCLUDE_DEVS="${14}"
3048        USE_COMP="${15}"
3049        USE_LILO="${16}"
3050        USE_STAR="${17}"
3051        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3052        DIFFERENTIAL="${19}"
3053        USE_GZIP="${20}"
3054        NOT_BOOT="${21}"
3055        [ "$USE_COMP" = "" ] && USE_COMP=yes
3056        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3057        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3058        [ "$TAPEDEV" ] && LogIt "This is a tape-based backup. Fine."
3059        # MONDO_ROOT is the real scratchdir
3060        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3061        if [ _"$MONDO_ROOT" != _"" ]; then
3062            mkdir -p $MONDO_ROOT
3063        else
3064            Die "MONDO_ROOT is undefined"
3065        fi
3066    else
3067        echo "Syntax: mindi (--custom ....)" >> /dev/stderr
3068        MindiExit -1
3069    fi
3070fi
3071
3072if [ _"$MINDI_CACHE" != _"" ]; then
3073    rm -rf $MINDI_CACHE/* 2> /dev/null
3074    mkdir -p $MINDI_CACHE
3075fi
3076
3077[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3078
3079if [ _"$MONDO_SHARE" = _"" ]; then
3080    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3081    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3082    LogIt "BusyBox sources are available from http://www.busybox.net"
3083    LogIt "------------------------------------------------------------------------------"
3084else
3085    echo "You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks" >> $LOGFILE
3086fi
3087if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3088    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3089else
3090    LogIt "Unable to find mindi-busybox, please install it"
3091    MindiExit -1
3092fi
3093
3094for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3095    modprobe $i >> $LOGFILE 2>> $LOGFILE
3096done
3097
3098KERN_DISK_MADE=""
3099
3100echo "DIFFERENTIAL = $DIFFERENTIAL" >> $LOGFILE
3101echo "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE" >> $LOGFILE
3102echo "NOT_BOOT = '$NOT_BOOT'" >> $LOGFILE
3103if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3104    LogIt "Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3105    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3106    MakeMountlist $MINDI_TMP/mountlist.txt
3107    CheckMountlist $MINDI_TMP/mountlist.txt
3108    mkdir -p $MINDI_TMP/small-all/tmp
3109    cd "$MINDI_TMP/small-all"
3110    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3111    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3112    sleep 2
3113    LogIt "Done. Exiting."
3114    MindiExit 0
3115fi
3116
3117if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3118    LogIt "Including the generation of a Bootable USB device on $USBDEVICE"
3119fi
3120
3121if [ "$kernelpath" = "" ] ; then
3122    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3123    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3124    read ch
3125    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3126        USE_OWN_KERNEL="yes"
3127    else
3128        USE_OWN_KERNEL="no"
3129    fi
3130    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3131        YOUR_KERNEL_SUCKS=""
3132        kernelpath=`TryToFindKernelPath`
3133        if [ "$kernelpath" = "" ] ; then
3134            echo -n "Please enter kernel path : "
3135            read kernelpath
3136        fi
3137    else
3138        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3139    fi
3140fi
3141if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3142    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3143    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3144        source $MINDI_LIB/FindDistroFailsafe
3145        # Log kernel image
3146        LogIt "FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3147        kernelpath="$FAILSAFE_KBIN"
3148        LogIt "I shall include a failsafe kernel, not your kernel, in the boot disks.\n"
3149        LogIt "The failsafe kernel is $kernelpath.\n"
3150        LogIt "However, you are still running your kernel. If Mindi fails to create your\n"
3151        LogIt "disks then it may still be a result of a problem with your kernel.\n"
3152        pwd=`pwd`
3153        cd "$MINDI_TMP"
3154        mkdir -p lib/modules
3155        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3156        cd "$pwd"
3157    else
3158        kernelpath=$MINDI_LIB/vmlinuz
3159        LogIt "I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3160        LogIt "However, you are still running your kernel. If Mindi fails to create your"
3161        LogIt "disks then it may still be a result of a problem with your kernel."
3162        pwd=`pwd`
3163        cd "$MINDI_TMP"
3164        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3165        cd "$pwd"
3166    fi
3167    YOUR_KERNEL_SUCKS="Your kernel sucks"
3168fi
3169echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3170[ "$(($RANDOM%64))" -eq "0" ] && LogIt "Dude, I've looked inside your computer and it's really dusty..."
3171
3172[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3173
3174PrepareDataDiskImages
3175
3176ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3177rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3178export ramdisk_size=$rds
3179
3180echo "Ramdisk will be $ramdisk_size KB" >> $LOGFILE
3181if [ "$ARCH" = "ia64" ] ; then
3182    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3183else
3184    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size MB disk image."
3185fi
3186
3187[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3188...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3189
3190if [ _"$MONDO_SHARE" = _"" ]; then
3191    ListImagesForUser
3192    OfferToMakeBootableISO
3193    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3194        OfferToMakeBootableUSB
3195    fi
3196    LogIt "Finished."
3197elif [ "$TAPEDEV" ] ; then
3198    if [ "$ARCH" != "ia64" ] ; then
3199        # We need to keep the img file as boot file for ia64 platform
3200        rm -f $MINDI_CACHE/{*img,*iso}
3201    else
3202        rm -f $MINDI_CACHE/*iso
3203    fi
3204    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3205        OfferToMakeBootableUSB
3206    fi
3207    OfferToMakeBootableISO
3208    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3209        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3210    else
3211        Die "Cannot find all.tar.gz, to be written to tape"
3212    fi
3213elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3214    OfferToMakeBootableUSB
3215else
3216    OfferToMakeBootableISO
3217fi
3218# cleanup
3219LogIt "$FRIENDLY_OUTSTRING"
3220for mtpt in $FLOPPY_WAS_MOUNTED ; do
3221    mount $mtpt
3222done
3223MindiExit 0
Note: See TracBrowser for help on using the repository browser.