source: branches/3.0/mindi/mindi

Last change on this file was 3360, checked in by bruno, 4 years ago

Backports from 3.2 (rev 3336-3359):

  • Improve kernel 3.14+ detection for initramfs
  • Fix installation of parted2fdisk under rootfs by removing useless -s option of install
  • Remove usage of internal function basename in parted2fdisk use File::Basename instead
  • Property svn:executable set to *
  • Property svn:keywords set to Rev Id
File size: 128.0 KB
Line 
1#!/bin/bash
2
3# $Id: mindi 3360 2015-03-07 13:41:11Z bruno $
4#
5#-----------------------------------------------------------------------------
6# mindi - mini-Linux distro based on the user's filesystem & distribution
7#
8# Mindi can create a multi-image boot/root kit. The first image is the boot
9# disk: it contains a kernel, a ramdisk etc. The second disk is data disk #1;
10# the third disk is data disk #2; and so it goes.
11#
12# See http://www.mondorescue.org for details.
13#-----------------------------------------------------------------------------
14
15### Which arch are we on (useful for ia64 port)
16ARCH=`/bin/uname -m`
17KERVERRUN=`/bin/uname -r`
18# By default we use the running kernel as a reference
19KERVER=$KERVERRUN
20
21# In case of problem with udev you can try to add udevdebug
22MINDI_ADDITIONAL_BOOT_PARAMS="devfs=nomount noresume selinux=0 barrier=off udevtimeout=10"
23MINDI_DEFAULT_BOOT_OPTION="interactive"
24# For a CD Recovery use 10000 instead rather. Beware till Hardcoded below. Planned to be changed on the perl version
25# So this parameter only applies to non CD recovery.
26MINDI_BOOT_TIMEOUT="300"
27
28MINDI_REV=PBREV
29MINDI_VER=PBVER
30
31MINDI_VERSION=${MINDI_VER}-r$MINDI_REV
32MINDI_PREFIX=XXX
33MINDI_CONF=YYY
34MINDI_SBIN=${MINDI_PREFIX}/sbin
35MINDI_LIB=LLL
36MINDI_CACHE=/var/cache/mindi
37
38# Temporary directory for mindi
39TMPDIR=/tmp
40
41EXTRA_SPACE=120000      # increase if you run out of ramdisk space
42BOOT_SIZE=65600         # size of the boot disk
43
44PROMPT_MAKE_CD_IMAGE="yes"
45    # Ask if you want to make a CD Image to be written?
46    # if this is set to 'no', then the image will be created automatically
47
48PROMPT_MAKE_USB_IMAGE="yes"
49    # Ask if you want to make a USB Image to be written?
50    # if this is set to 'no', then the image will be created automatically
51
52USE_OWN_KERNEL="yes"
53    # If set to "no", you will be prompted for whether or not
54    # you want to use your own kernel, or the supplied default.
55    # If "yes" mindi will automatically use your own kernel.
56
57KERNEL_IS_XEN="no"
58    # If set to "no", the kernel is not a Xen kernel
59    # If "yes", mindi will modify isolinux.cfg for the Xen kernel.
60xenkernelpath=""
61 
62MY_FSTAB=/etc/fstab
63TAPE_MODS="ht st osst ide-tape ide_tape"
64SCSI_MODS="3w-xxxx 3w_xxxx 3w_9xxx 3w-9xxx 53c7,8xx a100u2w a320raid aacraid adpahci advansys aha152x aha1542 aha1740 aic79xx aic79xx_mod aic7xxx aic7xxx_mod aic7xxx_old AM53C974 atp870u BusLogic cciss cpqfc hpsa hpvsa dmx3191d dpt_i2o dtc eata eata_dma eata_pio fdomain gdth g_NCR5380 i2o_block i2o_core ide-scsi ieee1394 imm in2000 initio ips iscsi be2iscsi cxgb3i cxgb3 cxgb4i cxgb4 libcxgbi iscsi_boot_sysfs iscsi_target_mod iscsi_tcp libiscsi libiscsi2 scsi_transport_iscsi scsi_transport_iscsi2 libiscsi_tcp uio isp megaraid megaraid_mm megaraid_mbox megaraid_sas mega_sr mptbase mptscsih mptsas mptspi mptfc mptscsi mptctl NCR53c406a ncr53c8xx nsp32 pas16 pci2000 pci2220i pcmcia ppa psi240i qla1280 qla2200 qla2300 qla2400 qla2xxx qla2xxx_conf qlogicfas qlogicfc qlogicisp qlogicfas qlogicfas408 raw1394 scsi_mod scsi_transport_sas scsi_transport_spi scsi_transport_fc sd_mod crc_t10dif crc-t10dif seagate sg sim710 sr_mod sym53c416 sym53c8xx sym53c8xx_2 t128 tmscsim u14-34f ultrastor wd7000 vmhgfs intermodule scsi_dh scsi_tgt emcpdm emcpgpx emcpmpx emcp scsi_dh_emc scsi_dh_alua dc395x diskdumplib scsi_dump_register arcmsr"
65
66# ide-probe-mod
67IDE_MODS="ide ide-floppy floppy ide-generic ide-detect ide-mod ide-disk ide_disk ide-cd ide_cd ide_cd_mod ide-cd_mod ide-cs ide-core ide_core ide-gd_mod ide_gd_mod edd paride ata_generic ide_pci_generic ata_piix libata dock via82cxxx generic nvidia ahci libahci sata_nv cmd64x pata_via pata_amd pata_marvell pata_serverworks pata_sis pata_sil680 pata_jmicron pata_atiixp pata_acpi amd74xx sis5513 jmicron sata_promise sata_via serverworks sata_svw blkbk virtio virtio_ring virtio_pci virtio_blk virtio_balloon hv_storvsc"
68PCMCIA_MODS="pcmcia_core ds yenta_socket"
69USB_MODS="usb-storage usb-ohci usb-uhci usbcore usb_common usb-common usb_storage input hid hid_generic uhci_hcd ehci-hcd uhci-hcd ehci-hcd ehci-pci ohci-hcd ohci_hcd ohci-pci xhci xhci-hcd usbkbd usbhid keybdev mousedev libusual scsi_mod ff-memless ums_cypress ums-cypress cp210x usbserial"
70NET_MODS="auth_rpcgss sunrpc nfs nfs_acl lockd fscache loop mii 3c59x e100 bcm5700 cnic be2net 8021q bnx2 bnx2x bnx2i mdio e1000 e1000e igb dca eepro100 ne2k-pci tg3 libphy pcnet32 8139cp 8139too 8390 forcedeth vmxnet vmxnet3 vmnet exportfs fuse crc32c libcrc32c netbk xenblktap r8169 virtio_net via_rhine garp lzo lzo_decompress lzo_compress ipv6 ptp_pch"
71CDROM_MODS="$TAPE_MODS $IDE_MODS $USB_MODS $PCMCIA_MODS $SCSI_MODS $NET_MODS af_packet cdrom isocd isofs inflate_fs nls_iso8859-1 nls_base nls_cp437 nls_utf8 sg sr_mod zlib_inflate iso9660 vfat fat"
72# Those modules will only go on the backup media, not the boot media.
73EXTRA_MODS="$CDROM_MODS loop md-mod linear raid0 raid1 xor raid10 raid5 raid456 raid6_pq async_raid6_recov async_pq xor async_tx async_memcpy async_xor lvm-mod dm-mod dm_mod dm-snapshot dm_snapshot dm-zero dm_zero dm-mirror dm_mirror dm-multipath dm-round-robin dm-emc dm-hp-sw dm-rdac dm-region-hash dm-snapshot dm-log multipath jfs xfs btrfs zlib_deflate xfs_support pagebuf reiserfs ext2 ext3 minix nfs nfs_acl nfsd lockd sunrpc jbd mbcache ext4 jbd2 crc16 ocfs2 ocfs2_dlm ocfs2_nodemanager configfs vxodm vxgms vxglm gab llt dmpaa vxspec vxio vxdmp vxportal fdd vxfs "
74# Replace with that line for HP OCMP e.g.
75#DENY_MODS="MPS_Driver_Mapper mps octtldrv tscttl streams kqemu fdomain"
76DENY_MODS="kqemu vxfen"
77# Force some modules to be included
78FORCE_MODS=""
79
80# Find MBR in case of bootable USB device to build
81MBRFILE=/usr/lib/syslinux/mbr.bin
82[ ! -r "$MBRFILE" ] && MBRFILE=/usr/lib64/syslinux/mbr.bin
83[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/syslinux/mbr.bin
84[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib/syslinux/mbr.bin
85[ ! -r "$MBRFILE" ] && MBRFILE=/usr/share/lib64/syslinux/mbr.bin
86
87LOGFILE=/var/log/mindi.log
88BOOT_MEDIA_MESSAGE="\
89To format and restore all files automatically, type '0enuke07' <enter>.\n\
90To restore some/all files interactively, type '0einteractive07' <enter>.\n\
91To compare the archives with your filesystem, type '0ecompare07' <enter>.\n\
92To boot to a command-line prompt (expert mode), type '0eexpert07' <enter>.\n\
93\n\
94You may add one or more parameters as well as per the function keys below\n\
95e.g. Type '0enuke denymods=\"fdomain impi_si\"07' to not load these 2 modules\n\
96\n\
97If restoring from a local external disk or USB key, do not connect it \n\
98until the boot-up has finished.\n\
99\n\
100\n0eF107-Main | Boot Parameters 0eF207-1/2 | 0eF307-2/2 | 0eF407-PXE\n\
101"
102FDISK=$MINDI_SBIN/parted2fdisk
103
104# Using a config file allow to overwrite some values
105MINDI_CONFIG="$MINDI_CONF/mindi.conf"
106if [ -f $MINDI_CONFIG ]; then
107    . $MINDI_CONFIG
108fi
109DEPLIST_FILE="$MINDI_CONF/deplist.txt"
110DEPLIST_DIR="$MINDI_CONF/deplist.d"
111
112ISO_CMD="/usr/bin/mkisofs"
113ISO_OPT="-J -r -v -p Mindi -publisher http://www.mondorescue.org -A Mindi"
114
115# Mandriva system e.g. use cdrkit, which uses genisoimage instead of mkisofs.
116# However, they use exactly the same command line parameters, so just
117# use genisoimage if it's available.
118if [ ! -x $ISO_CMD ]; then
119    ISO_CMD=/usr/bin/genisoimage
120fi
121
122
123# Function to log on screen only
124LogScreen() {
125    if [ -e /dev/stderr ] ; then
126        echo -e "$1" >> /dev/stderr
127    elif [ -e /usr/bin/logger ] ; then
128        /usr/bin/logger -s $1
129    fi
130}
131
132# Function to log in log file only
133LogFile() {
134
135    echo -e "$1" >> $LOGFILE
136    if [ _"$2" != _"" ]; then
137        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
138    fi
139    rm -f "$2"
140}
141
142# Function to log in both screen and logfile
143LogAll() {
144    LogScreen "$1"
145    LogFile "$1" "$2"
146}
147
148# Preserved for compatibility
149LogIt() {
150    LogAll "$1" "$2"
151}
152
153# Last function called before exiting
154# Parameter is exit code value
155# Should be declared here as used immediately below potentialy
156MindiExit() {
157    LogFile "Mindi $MINDI_VERSION is exiting" 
158    LogFile "End date : `date`" 
159    if [ _"$MONDO_SHARE" != _"" ] ; then
160        echo "------------- mindi logfile included -------------------------" >> /var/log/mondoarchive.log
161        if [ -f $LOGFILE ]; then
162            cat $LOGFILE >> /var/log/mondoarchive.log
163        else
164            echo "No LOGFILE available in that mindi run"  >> /var/log/mondoarchive.log
165        fi
166        echo "--------------------------------------------------------------">> /var/log/mondoarchive.log
167    fi
168
169    cd /
170    sync&
171
172    # Clean temporary files only when standalone mindi
173    if [ _"$MINDI_TMP" != _"$MONDO_TMP" ]; then
174        rm -Rf $MINDI_TMP
175    fi
176    exit $1
177}
178
179Die() {
180    local i
181    if [ "$1" = "" ] ; then
182        LogAll "FATAL ERROR"
183    else
184        LogAll "FATAL ERROR. $1"
185    fi
186    if [ _"$2" != _"" ]; then
187        grep -Ev "tar: Removing \`/\'" "$2" >> $LOGFILE
188    fi
189    rm -f "$2"
190
191    LogAll "Please e-mail a copy of $LOGFILE to the mailing list."
192    LogAll "See http://www.mondorescue.org for more information."
193    LogAll "WE CANNOT HELP unless you enclose that file.\n"
194    MindiExit -1
195}
196
197# Now we can create what we need
198MINDI_TMP=`mktemp -d $TMPDIR/mindi.XXXXXXXXXX`
199if [ $? -ne 0 ]; then
200    df $TMPDIR
201    Die "Unable to create a temporary directory ! Check space on $TMPDIR"
202fi
203if [ _"$MINDI_TMP" = _"" ]; then
204    Die "MINDI_TMP is empty, aborting"
205fi
206if [ _"$MINDI_TMP" = _"/" ]; then
207    Die "MINDI_TMP is /, aborting"
208fi
209export MINDI_TMP
210
211# ----------------------------------------------------------------------------
212
213
214AbortHere() {
215    [ "$mountpoint" ] && umount $mountpoint 2>> $LOGFILE
216    Die "Program is terminating in response to signal received from OS/user"
217}
218
219
220Aborted() {
221    trap SIGHUP SIGTERM SIGTRAP SIGINT
222    [ "$MINDI_CACHE" != "" ] && rm -f $MINDI_CACHE/mindi*img $MINDI_CACHE/*gz $MINDI_CACHE/mindi.iso
223    [ "$minidir_root" != "" ] && rm -Rf $minidir_root/*
224    Die "User abort."
225}
226
227
228AddFileToCfgIfExists() {
229    [ -e "$1" ] && echo -en "$2 `cat $1`\n" >> $3
230}
231
232
233AddKeyboardMappingFile() {
234    local mappath r included_list included_item i res ii sss
235    mappath=$1
236    KBDEPTH=$(($KBDEPTH+1))
237    [ "$KBDEPTH" -gt "128" ] && Die "Edit $MINDI_SBIN/mindi and disable FindAndAddUserKeyboardMappingFile (line 2160, approx.)"
238    if [ -e "$bigdir/$mappath" ] ; then
239        LogFile "INFO: $mappath already added"
240        return
241    elif [ -d "$bigdir/$mappath" ] ; then
242        echo "Cannot add $mappath: it's a directory. Sorry."
243        return
244    fi
245    LogFile "INFO: Added kbd map $mappath"
246    if [ ! -e "$mappath" ] ; then
247        mappath=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
248        if [ ! -e "$mappath" ] ; then
249            LogAll "WARNING: Cannot add $mappath: kbd map file not found"
250            return
251        fi
252    else
253        echo -en "`basename $mappath | tr '.' '#' | sed s/#kmap#gz// | sed s/#inc#gz//` " | tr '#' '.'
254    fi
255
256    tar cf - -C / $mappath 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogAll "WARNING: AKMF -- Could not copy $mappath to $bigdir" $MINDI_TMP/$$.log
257    if [ "`echo $mappath | grep -F ".gz"`" ] ; then
258        included_list=`gzip -dc $mappath | grep -Fi include | sed s/'"'//g | cut -d' ' -f2`
259    else
260        included_list=`grep -Fi include $mappath | sed s/'"'//g | cut -d' ' -f2`
261    fi
262    for included_item in $included_list ; do
263        if [ ! -e "$included_item" ] ; then
264            sss=`grep -F "${included_item}.inc" $MINDI_TMP/keymaps.find`
265            [ "$sss" = "" ] && sss=`grep -F "$included_item" $MINDI_TMP/keymaps.find`
266            for ii in $sss ; do
267                [ -e "$ii" ] && AddKeyboardMappingFile $ii
268            done
269        else
270            AddKeyboardMappingFile $included_item
271        fi
272    done
273}
274
275
276CopyDependenciesToDirectory() {
277    local outdir incoming counter d found tdir
278    outdir=$1
279    mkdir -p $outdir
280    incoming=`ReadLine`
281    counter=0
282    while [ "$incoming" != "" ] ; do
283        # Non absolute file names should not arrive till here => skipped
284        if [ `echo "$incoming" | cut -c1` != '/' ]; then
285            LogAll "WARNING: Unable to handle $incoming"
286            incoming=`ReadLine`
287            continue
288        fi
289        # no parent directory of incoming should be a link, copy is not possible in that case
290        d=`dirname "$incoming"`
291        found="false"
292        while [ $d != "/" -a $found = "false" ]; do
293            [ -h "$d" ] && found="true"
294            d=`dirname "$d"`
295        done
296        if [ -d "$incoming" -a ! -h "$incoming" ]; then
297            find $incoming/* -maxdepth 0 2> /dev/null | CopyDependenciesToDirectory $outdir 0
298        elif [ -e "$incoming" ] && [ $found = "false" ]; then
299            if [ ! -h "$incoming" ]; then
300                tar cf - -C / $incoming 2>> $MINDI_TMP/$$.log | (cd "$outdir" ; tar xf -) || Die "Cannot copy $incoming to $outdir - did you run out of disk space?" $MINDI_TMP/$$.log
301            else
302                tdir=`dirname "$incoming"`
303                if [ ! -e "$outdir/$tdir" ]; then
304                    mkdir -p "$outdir/$tdir"
305                fi
306                cp --no-dereference --preserve=all $incoming "$outdir/$tdir"
307            fi
308            # Only uncompress modules if not using udevd
309            if [ "`echo "$incoming" | grep "lib/modules/.*\..*o\.gz"`" != "" ] && [ "`ps auxww | grep -v grep | grep -qw udevd`" != "" ]; then
310                gunzip -f $outdir/$incoming || LogAll "WARNING: Cannot gunzip $outdir/$incoming"
311            fi
312            [ -x "$outdir" ] && StripExecutable $outdir
313            counter=$(($counter+1))
314            LogProgress $counter $2
315        fi
316        incoming=`ReadLine`
317    done
318}
319
320
321CountItemsIn() {
322    local r
323    r=0
324    for q in $1 ; do
325        r=$(($r+1))
326    done
327    echo $r
328}
329
330
331DropOptimizedLibraries() {
332    local outdir filelist list_of_optimized_libraries optimized_lib_name vanilla_lib_name reason msg resolved res
333    filelist=$1
334    outdir=$2
335
336    list_of_optimized_libraries=`grep "lib/i[5-7]86/" $filelist`
337    if [ "$list_of_optimized_libraries" = "" ] ; then
338        return 0
339    fi
340    echo -en "Dropping i686-optimized libraries if appropriate"
341    for optimized_lib_name in $list_of_optimized_libraries ; do
342        echo -en "."
343        reason=""
344        vanilla_lib_name=`echo "$optimized_lib_name" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
345        echo "$vanilla_lib_name" >> $filelist
346        LogFile "INFO: Adding $vanilla_lib_name to filelist"
347        mkdir -p $outdir$optimized_lib_name > /dev/null 2> /dev/null
348        rmdir $outdir$optimized_lib_name > /dev/null 2> /dev/null
349
350        # This may return multiple files
351        for resolved in `ReadAllLink $vanilla_lib_name`; do
352            LogFile "INFO: Adding as deps $resolved to filelist"
353            vanilla_resolved_name=`echo "$resolved" | sed -e 's/i[5-7]86//' -e 's/cmov//' -e 's/nosegneg//' | tr -s '/' '/'`
354            if [ "$vanilla_resolved_name" != "$resolved" ]; then
355                mkdir -p $outdir$resolved> /dev/null 2> /dev/null
356                rmdir $outdir$resolved > /dev/null 2> /dev/null
357                ln -sf $vanilla_resolved_name $outdir$resolved
358                LogFile "INFO: Excluding deps $resolved" 
359                grep -Fvx "$resolved" "$filelist" > $filelist.tmp
360                LogFile "INFO: Replacing it with $vanilla_resolved_name" 
361                echo "$vanilla_resolved_name" >> $filelist.tmp
362                mv -f $filelist.tmp $filelist
363            fi
364        done
365    done
366    $AWK '{ print $1; }' $filelist | sort -u > $filelist.tmp
367    mv -f $filelist.tmp $filelist
368    echo -e "$DONE"
369}
370
371
372FindAndAddUserKeyboardMappingFile() {
373    local r res mapfile mappath included_item included_list keyfile mp locale
374    LogAll "INFO: Analyzing your keyboard's configuration."
375    KEYDIR=/usr/lib/kbd
376    [ ! -e "$KEYDIR" ] && KEYDIR=/usr/share/kbd     # Slackware
377    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console
378    [ ! -e "$KEYDIR" ] && KEYDIR=/etc/console-setup
379    [ ! -e "$KEYDIR" ] && KEYDIR=/lib/kbd
380    if [ ! -e "$KEYDIR" ] ; then
381        LogAll "WARNING: Keyboard mapping directory not found. I shall use default map at boot-time."
382        return 0
383    fi
384    if [ -e "/etc/sysconfig/keyboard" ] ; then
385        LogFile "INFO: Red Hat-style config detected."
386        keyfile=/etc/sysconfig/keyboard
387    elif [ -e "/etc/vconsole.conf" ] ; then
388        LogFile "INFO: New Fedora style config detected."
389        keyfile=/etc/vconsole.conf
390    elif [ -e "/etc/rc.d/rc.keymap" ] ; then
391        LogFile "INFO: Slackware-style config detected."
392        keyfile=/etc/rc.d/rc.keymap
393    elif [ -e "/etc/rc.config" ] ; then
394        LogFile "INFO: Debian-style config detected."
395        keyfile=/etc/rc.config
396    elif [ -e "/etc/console/boottime.kmap.gz" ] ; then
397        LogFile "INFO: Debian-style config detected."
398        mkdir -p $bigdir/tmp
399        echo "/etc/console/boottime.kmap.gz" > $bigdir/tmp/KEYMAP-LIVES-HERE
400        KBDEPTH=0
401        mkdir -p $bigdir/etc/console
402        cp /etc/console/boottime.kmap.gz $bigdir/etc/console 2>> $LOGFILE
403        echo ""
404        echo -e "$DONE"
405        return 0
406    elif [ -e "/etc/console-setup/boottime.kmap.gz" ] || [ -e "/etc/console-setup/cached.kmap.gz" ] ; then
407        LogFile "INFO: Ubuntu-style config detected."
408        mkdir -p $bigdir/tmp
409        if [ -e "/etc/console-setup/boottime.kmap.gz" ] ; then
410            kbdfile="/etc/console-setup/boottime.kmap.gz"
411        else
412            kbdfile="/etc/console-setup/cached.kmap.gz"
413        fi
414        echo $kbdfile > $bigdir/tmp/KEYMAP-LIVES-HERE
415        KBDEPTH=0
416        mkdir -p $bigdir/etc/console-setup
417        cp $kbdfile $bigdir/etc/console-setup 2>> $LOGFILE
418        echo ""
419        echo -e "$DONE"
420        return 0
421    elif [ -e "/etc/rc.conf" ] ; then
422        LogFile "INFO: ArchLinux config detected."
423        keyfile=/etc/rc.conf
424    elif [ -e "/etc/conf.d/keymaps" ] ; then
425        LogFile "INFO: Gentoo-style config detected."
426        keyfile=/etc/conf.d/keymaps
427    elif [ -e "/etc/X11/xorg.conf.d/00-keyboard.conf" ] ; then
428        LogFile "INFO: X11-style config detected."
429        keyfile=/etc/X11/xorg.conf.d/00-keyboard.conf
430    else
431        LogFile "Searching for rc.config ..."
432        keyfile=`find /etc -name rc.config | head -n1`
433        if [ "$keyfile" = "" ] || [ ! -e "$keyfile" ] ; then
434            LogAll "WARNING: Unknown config detected. Default keyboard map will be used."
435            return
436        else
437            LogFile "INFO: Found $keyfile"
438        fi
439    fi
440    if [ ! -e "$KEYDIR/keymaps" ] ; then
441        LogAll "WARNING: Keyboard mapping directory not found. Default keyboard map will be used."
442        return
443    fi
444    LogFile "INFO: keyfile=$keyfile"
445    # For SLES we need to remove the .map.gz extension Cf #614
446    locale=`grep -F KEYTABLE "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2 | sed 's/.map.gz$//'`
447    [ ! "$locale" ] && locale=`grep '.map$' "$keyfile" | sed 's/^.* //'`        # Slackware
448    [ ! "$locale" ] && locale=`grep -E '^KEYMAP=' "$keyfile" | grep -v '^#' | tr -d '"' |cut -d'=' -f2`     # Gentoo, ArchLinux & New fedora
449    [ ! "$locale" ] && locale=`grep -E 'XkbLayout' "$keyfile" | grep -v '^#' | awk '{print $3}' | tr -d '"'`        #  Fedora 19
450    LogFile "INFO: locale=$locale"
451    #
452    # Process the keymaps dir once for all
453    # AddKeyboardMappingFile will use it recursively
454    #
455    find $KEYDIR/keymaps > $MINDI_TMP/keymaps.find
456    mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep -F "/${locale}." | grep -vx " *#.*"`
457    [ ! "$mp" ] && mp=`grep "i[3-8]86" $MINDI_TMP/keymaps.find | grep "$locale[^r][^/]" | grep -vx " *#.*"`
458    # If we have multiple keymaps then log it !!
459    echo "$mp" | grep -q " " >> $LOGFILE
460    if [ $? -eq 0 ]; then
461        LogAll "WARNING: Multiple keymaps found: $mp"
462        LogFile "INFO: The following one will be used"
463    fi
464    for i in $mp ; do
465        mappath=$i
466        [ -e "$i" ] && [ ! -d "$i" ] && break
467    done
468    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
469        mappath=$(find / -wholename "*/kbd/keymaps/*/$locale | head -1")
470    fi
471    LogFile "INFO: mappath = $mappath"
472    if [ ! -e "$mappath" ] || [ -d "$mappath" ] ; then
473        LogAll "WARNING: Keyboard mapping file not found. Default keyboard map will be used."
474        return
475    fi
476    LogAll "INFO: Adding the following keyboard mapping tables: "
477    mkdir -p $bigdir/tmp
478    echo "$mappath" > $bigdir/tmp/KEYMAP-LIVES-HERE
479    KBDEPTH=0
480    AddKeyboardMappingFile $mappath
481    echo ""
482    echo -e "$DONE"
483    rm -f $MINDI_TMP/keymaps.find
484    return 0
485}
486
487
488FindLdlinux32Binary() {
489    LDLINUXC32=/usr/lib/syslinux/ldlinux.c32
490    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/ldlinux.c32
491    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/syslinux/ldlinux.c32
492    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib/syslinux/ldlinux.c32
493    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/share/lib64/syslinux/ldlinux.c32
494    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib/syslinux/modules/bios/ldlinux.c32
495    [ ! -e "$LDLINUXC32" ] && LDLINUXC32=/usr/lib64/syslinux/modules/bios/ldlinux.c32
496    #[ ! -e "$LDLINUXC32" ] && LDLINUXC32=`find / -name ldlinux.c32 | grep -x "/.*/ldlinux.c32"`
497    if [ ! -e "$LDLINUXC32" ]; then 
498        LogFile "INFO: If you use syslinux 5.x, you may miss ldlinux.c32. If your syslinux RPM doesn't include ldlinux.c32, you may want to download another one"
499        LDLINUXC32=/tmp/idoesnthopefullyexist
500    else
501        LogFile "INFO: Found ldlinux.c32 at $LDLINUXC32"
502    fi
503}
504
505
506FindMboot32Binary() {
507    MBOOTC32=/usr/lib/syslinux/mboot.c32
508    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/mboot.c32
509    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/syslinux/mboot.c32
510    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib/syslinux/mboot.c32
511    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/share/lib64/syslinux/mboot.c32
512    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib/syslinux/modules/bios/mboot.c32
513    [ ! -e "$MBOOTC32" ] && MBOOTC32=/usr/lib64/syslinux/modules/bios/mboot.c32
514    [ ! -e "$MBOOTC32" ] && MBOOTC32=`find / -name mboot.c32 | grep -x "/.*/mboot.c32"`
515    [ ! -e "$MBOOTC32" ] && Die "Please install mboot.c32 first. If your syslinux RPM doesn't include mboot.c32, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
516    LogFile "INFO: Found mboot.c32 at $MBOOTC32"
517}
518
519FindIsolinuxBinary() {
520    ISOLINUX=/usr/lib/isolinux.bin
521    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/syslinux/isolinux.bin
522    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib64/syslinux/isolinux.bin
523    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/syslinux/isolinux.bin
524    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib/syslinux/isolinux.bin
525    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/share/lib64/syslinux/isolinux.bin
526    [ ! -e "$ISOLINUX" ] && ISOLINUX=/usr/lib/ISOLINUX/isolinux.bin
527    [ ! -e "$ISOLINUX" ] && ISOLINUX=`find / -name isolinux.bin | grep -x "/.*/isolinux.bin"`
528    [ ! -e "$ISOLINUX" ] && Die "Please install isolinux first. If your syslinux RPM doesn't include isolinux, you may download an isolinux RPM from Mondo's website - go to http://www.mondorescue.org/downloads.shtml"
529    LogFile "INFO: Found isolinux.bin at $ISOLINUX"
530}
531
532
533FindSpecificModuleInPath() {
534    local modpaths pwd line
535    pwd=`pwd`
536    if [ "$YOUR_KERNEL_SUCKS" ] ; then
537        cd "$MINDI_TMP"
538    else
539        cd /
540    fi
541    if [ ! -e "$1" ] ; then
542        LogAll "WARNING: cannot search specific path '$1'"
543        return 1
544    fi
545    # Find all files and links (required for some VMWare VMs)
546    modpaths=`find "$1" -name $2.*o -o -name $2.o.gz -o -name $2.ko.gz -o -name $2.ko.xz -o -name $2 -type f -o -type l`
547    echo "$modpaths"
548    cd "$pwd"
549}
550
551
552GenerateGiantDependencyList() {
553    local incoming loc fname list_of_files i tempfile outfile progress filelist res r mapfile mappath included_list included_item old_pwd tempdepfile modres noof_lines lvmversion lvmresolved
554
555    echo -en "Analyzing dependency requirements"
556    outfile=$1
557    tempfile=$MINDI_TMP/$$.txt
558    incoming=`ReadLine`
559
560    > $tempfile
561    progress=0
562    res=0
563    noof_lines=$2
564    while [ "$incoming" != "" ] ; do
565        if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
566            incoming=`ReadLine`
567            continue
568        fi
569        if [ "$incoming" = "LVMFILES:" ] ; then
570            break
571        fi
572        filelist=`GenerateListForFile "$incoming"`
573        r=$?
574        [ "$r" -ne "0" ] && LogAll "WARNING: $incoming not found"
575        res=$(($res+$r))
576#       LogFile "INFO: '$incoming' generates filelist '$filelist'"
577        for fname in $filelist ; do
578            [ "$fname" != "" ] && echo "$fname" >> $tempfile
579        done
580        progress=$(($progress+1))
581        LogProgress $progress $noof_lines
582        incoming=`ReadLine`
583    done
584    if  [ "$incoming" = "LVMFILES:" ] ; then
585        incoming=`ReadLine`
586        lvmversion=""
587        while [ "$incoming" != "" ] ; do
588            if echo "$incoming" | grep -x " *#.*" &> /dev/null ; then
589                incoming=`ReadLine`
590                continue
591            fi
592            filelist=`GenerateListForFile "$incoming"`
593            for tool in $filelist ; do
594                lvmresolved=`readlink -f $tool`
595                if [ "$tool" = "$lvmresolved" ]; then
596                    echo "$tool" >> $tempfile
597                elif echo "$lvmresolved" | grep "lvmiopversion" &> /dev/null ; then
598                    if [ "$lvmversion" = "" ] ; then
599                        lvmversion=`$lvmresolved`
600                        echo "$lvmresolved" >> $tempfile
601                    fi
602                    toolstripped=`echo $tool | $AWK -F / '{print $NF;}'`
603                    if [ "$lvmversion" = "200" ]; then
604                        # pvdata and lvmcreate_initrd don't exist in LVM2
605                        case "$toolstripped" in
606                        "pvdata")
607                            continue
608                            ;;
609                        "lvmcreate_initrd")
610                            continue
611                            ;;
612                        esac
613                    fi
614                    toolpath="/sbin/lvm-"$lvmversion"/"$toolstripped
615                    if [ -e "$toolpath" ] ; then
616                        echo "$toolpath" >> $tempfile
617                        echo "$tool" >> $tempfile
618                    else
619                        toolpath="/lib/lvm-"$lvmversion"/"$toolstripped
620                    fi
621                    if [ -e "$toolpath" ] ; then
622                        echo "$toolpath" >> $tempfile
623                        echo "$tool" >> $tempfile
624                    else
625                        echo "Where are your LVM-Tools? Couldn't find $tool"
626                    fi
627                else
628                    echo "$tool" >> $tempfile
629                fi
630            done
631            progress=$(($progress+1))
632            LogProgress $progress $noof_lines
633            incoming=`ReadLine`
634        done
635    fi
636    echo -en "$DONE\nMaking complete dependency list"
637
638    tr -s '/' '/' < $tempfile | sort -u > $tempfile.new
639    mv -f $tempfile.new $tempfile
640    > $outfile.pre
641    progress=0
642    noof_lines=`cat $tempfile | wc -l`
643    LogFile "---------------------------------"
644    LogFile "List of dependencies:             "
645    LogFile "---------------------------------"
646    for fname in `cat $tempfile` ; do
647        echo "$fname" | tee -a $LOGFILE >> $outfile.pre
648        LocateDeps $fname | tee -a $LOGFILE >> $outfile.pre
649        progress=$(($progress+1))
650        LogProgress $progress $noof_lines
651    done
652    if [ _"$MONDO_SHARE" != _"" ]; then
653        mkdir -p $bigdir/tmp
654        mkdir -p $bigdir/usr/bin
655        if [ -e "$MINDI_TMP/post-nuke.tgz" ] ; then
656            LogAll "\nINFO: Incorporating post-nuke tarball"
657            old_pwd=`pwd`
658            cd "$bigdir"
659            tar -zxf $MINDI_TMP/post-nuke.tgz 2>> $MINDI_TMP/$$.log || LogAll "ERROR: when untarring post-nuke tarball" $MINDI_TMP/$$.log
660            cd "$old_pwd"
661        fi
662        if cp -f $MINDI_TMP/mondo*restore $bigdir/usr/bin 2>> $LOGFILE ; then
663            LocateDeps $bigdir/usr/bin/mondo*restore >> $outfile.pre
664        else
665            LogIt "ERROR: Cannot find mondo*restore in mondo's tempdir, $MINDI_TMP"
666            LogIt "       I bet you've got a spare copy of Mondo or Mindi floating around on your system."
667            LogIt "       If Mindi was called by Mondo then send me a bug report."
668            LogIt "       It not, type 'ps ax' to see which Mondo-related process is still running then kill it. :-)"
669            LogIt "       Finally, run Mindi again."
670            Die "Odd."
671        fi
672        cp -f $MINDI_TMP/BOOTLOADER.* $bigdir 2>> $LOGFILE || LogIt "\nINFO: Mondo v1.2x defaults to LILO as the bootloader, BTW."
673        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
674            LogAll "\nINFO: Incorporating Network-related settings"
675            for r in NETFS-* ISO-PREFIX ; do
676                cp -f $MINDI_TMP/$r $bigdir/tmp 2>> $LOGFILE || Die "Cannot copy $r - did you run out of disk space?"
677                LogFile "INFO: Copying $r to ramdisk"
678            done
679        fi
680    fi
681    tr ' ' '\n' < $outfile.pre | tr -s '/' '/' | grep -Fvx "" | sort -u | grep -Ev "/libX11|/libXext|/libXi|/libgtk|/libgdk" > $outfile
682    rm -f $tempfile $outfile.pre
683    [ "$res" -eq "0" ] && echo -e "\r\t\t\t\t\t\t\t\t$DONE" || echo "\nFailed."
684    return $res
685}
686
687
688GenerateListForFile() {
689    local files_found loc fname incoming i res
690    incoming="$1"
691    files_found=""
692    res=0
693
694    for fname in $incoming ; do
695        files_found="$files_found `LocateFile $fname`"
696    done
697
698    echo "$files_found" | tr ' ' '\n' | sort -u | tr '\n' ' '
699}
700
701
702# Returns all disk devices which are part of a raid array
703GetAllRaidMembers() {
704    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*device/ if(\$2) {print \$2}" < /etc/raidtab
705}
706
707
708GetFileSizeList() {
709    local i
710    for i in `find $1 -type d -o -print` ; do
711        du -sk $i
712    done
713}
714
715
716# Check kernel filesystem capabilites for accessing initrd image
717# Could be ext2 FS (old mode) or initramfs (new mode)
718#
719# Interface definition:
720# param #1: absolute path to kernel image
721GetInitrdFilesystemToUse() {
722
723    # interface test: make sure we have one parameter
724    if [ $# -ne 1 ]; then
725        Die "GetInitrdFilesystemToUse(): Expected 1 parameter, got $#."
726    fi
727
728    # interface parameters
729    local lvKernelImage=$1
730
731    # local constants (filesystem magic strings)
732    local lcMagicCramfs="<3>cramfs: wrong magic"
733    local lcMagicExt2fs="EXT2-fs: blocksize too small for device."
734    local lcMagicExt3fs="<3>EXT3-fs: blocksize too small for journal device."
735    local lcMagicInitfs="<6>checking if image is initramfs...|[<]*6[>]*Unpacking initramfs...|[<]*6[>]*Trying to unpack rootfs image as initramfs"
736
737    # local variables
738    local lvOffset
739    local lvScanRes
740    local lvUseFilesystem
741
742    # say where we are.
743    LogFile "INFO: GetInitrdFilesystemToUse(): called with parameter: $lvKernelImage"
744
745    # verify that file exists
746    [ ! -f $lvKernelImage ] && Die "File $lvKernelImage not found. Terminating."
747
748    # Kernel may be gzip compressed - Case of RHEL5 - SLES11SP1
749    file $lvKernelImage 2>&1 | grep -q gzip
750    if [ $? -eq 0 ]; then
751        LogFile "INFO: Found a gzip compressed kernel $lvKernelImage"
752        lvScanRes=`gzip -cd $lvKernelImage | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
753    else
754        LogFile "INFO: Found a non gzip compressed kernel $lvKernelImage"
755        # kernel is x86 boot sector in RHEL3/4 with embedded gzip content
756        # get offet of gzip magic "1f8b0800" in file (for these older kernels)
757        lvOffset=`od -vA n -t x1 $lvKernelImage | tr -d '[:space:]' | awk '{ print match($0, "1f8b0800")}' 2> /dev/null`
758        if [ $lvOffset -eq 0 ]; then
759            LogFile "INFO: gzip magic not found in file $lvKernelImage. Supposing initramfs."
760            lvScanRes=$lcMagicInitfs
761        else
762            lvOffset=`expr $lvOffset / 2`
763            LogFile "INFO: GetInitrdFilesystemToUse(): gzip magic found at lvOffset $lvOffset."
764            # scan again  kernel image
765            lvScanRes=`dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep -E "$lcMagicCramfs|$lcMagicExt2fs|$lcMagicExt3fs|$lcMagicInitfs" 2> /dev/null`
766        fi
767    fi
768
769    # determine which filesystem to use for initrd image: ext2|3fs, gzip'ed cpio (initramfs) or cramfs
770    if [ `echo $lvScanRes | grep -Ec "$lcMagicExt2fs"` -eq 1 ]; then
771        lvUseFilesystem="ext2fs"
772    elif [ `echo $lvScanRes | grep -Ec "$lcMagicExt3fs"` -eq 1 ]; then
773        lvUseFilesystem="ext3fs"
774    elif [ `echo $lvScanRes | grep -Ec "$lcMagicInitfs"` -eq 1 ]; then
775        lvUseFilesystem="initramfs"
776    elif [ `echo $lvScanRes | grep -Ec "$lcMagicCramfs"` -eq 1 ]; then
777        lvUseFilesystem="cramfs"
778    else
779        # In that case, we are most probably after 2.6.30 and use the supported initramfs
780        LogFile "WARNING: No automatic detection found previously. Supposing initramfs."
781        LogFile "WARNING: Report on the MondoRescue mailing-list with your log files and the result of"
782        LogFile "WARNING: dd ibs=1 skip=$lvOffset if=$lvKernelImage obs=1M 2>/dev/null | gunzip -c 2> /dev/null | strings | grep initramfs"
783        lvUseFilesystem="initramfs"
784    fi
785
786    # say what we are using
787    LogFile "INFO: GetInitrdFilesystemToUse(): Filesytem to use for initial ram disk is $lvUseFilesystem."
788
789    # return file system to use
790    echo "$lvUseFilesystem"
791
792}
793
794# Searches members of raid device
795# $1: raid device (/dev/md...)
796GetRaidDevMembers() {
797    if [ ! -f /etc/raidtab ]; then 
798        return
799    fi
800    $AWK "/^[[:space:]]*#/ {next} /^[[:space:]]*raiddev/ {if(dev) exit; if(\$2 == \"$1\") dev=\$2} /^[[:space:]]*device/ {if(dev) {print \$2}}" < /etc/raidtab
801}
802
803
804HackPathsToFailsafe() {
805    local incoming newpath stub i pwd
806    incoming=`ReadLine`
807    pwd=`pwd`
808    cd "$MINDI_TMP"
809    while [ "$incoming" != "" ] ; do
810        stub=`basename $incoming`
811        newpath=`FindSpecificModuleInPath lib/modules/$FAILSAFE_KVER $stub`
812        for i in $newpath ; do
813            echo "$i"
814        done
815        read incoming
816    done
817    cd "$pwd"
818}
819
820
821ListAllPartitions() {
822    local res currline partition all_partitions ap_orig remaining i j
823
824    grep -Evx " *#.*| *none.*" $MY_FSTAB | $AWK '/^\/dev\/[imhs]d||^LABEL=\/|^UUID=/ && !/\/fdd|\/cdr|\/zip|\/floppy/ {print $1}'
825    [ -e "/etc/raidtab" ] && $AWK '/^ *device/ {print $2}' /etc/raidtab
826    if [ -e "/vmfs/volumes" ]; then
827        # For VMWare ESX 3 get the device names of these volumes
828        vdf -P | grep -E '/vmfs/volumes' | $AWK '{print $1}'
829    fi
830    return
831}
832
833
834ListImagesForUser() {
835    local path fname
836    path=$MINDI_CACHE
837    echo -en "In the directory '$path' you will find the images:-\n"
838    for fname in `ls $path | grep -F mindi-` ; do
839        printf "%19s " $fname
840    done
841    echo " "
842}
843
844
845ListKernelModulePaths() {
846    local module_list module fname r kern
847    module_list="$MODULES"
848    # Remove unwanted modules from list
849    for i in $DENY_MODS; do
850        module_list=`echo ${module_list} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
851        EXTRA_MODS=`echo ${EXTRA_MODS} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
852    done
853###
854### Sq-Modification ... Use kernelname for module search path if specified
855###
856    if [ "${kernelname}" != "" -a "${kernelname}" != "FAILSAFE" ]
857    then
858        kern=${kernelname}
859    else
860        kern="$KERVERRUN"
861    fi
862    export KERVER=$kern
863###
864### Sq-Mod End
865###
866    # Get rid of duplicates, so that if a live kernel module also appears
867    # in $EXTRA_MODS that it won't get reported as "live module file not found" twice.
868    for module in `echo $module_list $EXTRA_MODS | tr ' ' '\n' | sort -u` ; do
869        r=`find /lib/modules/$kern -type f | grep "/${module}\..*o" | tail -n1`
870        if [ -z "$r" ]; then
871            if [ "`echo "$MODULES" | grep -w $module`" ]; then
872                r="[live module file not found]"
873            else
874                r="[extra module file not found]"
875            fi
876        else
877            [ -f "$r" ] && echo "$r"
878        fi
879        LogFile "INFO: module $module --> $r"
880    done
881    find /lib/modules/$kern/modules.* -type f 2> /dev/null
882}
883
884#
885# Critical function which computes all dependencies (dyn. lib.)
886# for a list of binaries
887#
888LocateDeps() {
889    local incoming fname deps
890    incoming="$*"
891    for fname in $incoming ; do
892        if [ ! -e "$fname" ] ; then
893            LogFile "WARNING: $fname does not exist; cannot be LDD'd."
894            if echo $fname | grep lvm &> /dev/null ; then
895                LogFile "          This warning only affects you if you are using LVM."
896                if echo "$MODULES" | grep lvm &> /dev/null ; then
897                    LogFile "          I think you are, so please take heed!"
898                else
899                    LogFile "          I don't think you are, so don't worry about it."
900                fi
901            fi
902        elif [ -h "$fname" ] && [ -x "$fname" ] ; then
903            newf=`readlink -f $fname`
904            LogFile "INFO: $fname is softlink to $newf which deps will be analyzed"
905            ldd $newf 2> /dev/null | ProcessLDD
906        else
907            ldd $fname 2> /dev/null | ProcessLDD
908        fi
909    done
910}
911
912
913# Give all symlinks recursively of a full path name
914ReadAllLink() {
915    file="$1"
916
917    while [ `echo $file | grep -Ec '\.\./'` -ne 0 ]; do
918        # We need to normalise the path with .. in it
919        file=`echo $file | perl -p -e 's|([^/]*)/([^/]+)/\.\./([^/]+)|$1/$3|g'`
920    done
921    echo "$file"
922    if [ ! -h $file ]; then
923        return 0
924    fi
925
926    link=`readlink $file`
927    d=`dirname $file`
928    # Is link a relative or full path name
929    fchar=`echo $link | cut -c1`
930    # If mother dir is a link print it
931    if [ -h "$d" ]; then
932        echo "$d"
933        d2=`readlink $d`
934        c2=`echo $d2 | cut -c1`
935        if [ "$c2" != "/" ]; then
936            if [ "$c2" != "." ]; then
937                d="/$d2"
938            else
939                d="$d/$d2"
940            fi
941        fi
942    fi
943    if [ "$fchar" != "/" ]; then
944        # Relative or local link
945        ReadAllLink "$d/$link" 
946    else
947        # Absolute path
948        ReadAllLink $link 
949    fi
950}
951
952
953LocateFile() {
954    local i path fname_to_find location output resolved tmp stub cache_id loclist
955    fname_to_find="$1"
956    # It's an absolute path
957    if echo "$fname_to_find" | grep -x "/.*" ; then
958        output="$fname_to_find"
959        if [ -h "$output" ] ; then
960            output="`ReadAllLink $output` $output"
961        fi
962        echo "$output"
963        return 0
964    fi
965    # It's not an absolute path
966    output=""
967    for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin `find /usr/lib /lib /usr/local/lib /usr/X11R6/lib /usr/lib64 /lib64 /usr/local/lib64 /usr/X11R6/lib64 -type d -maxdepth 1 2> /dev/null` ; do
968    #for path in /etc /usr /usr/bin /usr/sbin /bin /usr/X11R6/bin /sbin /usr/local/bin /usr/local/sbin /usr/lib /usr/lib64 /usr/lib64/* /lib /lib64 /lib64/* /usr/local/lib /usr/local/lib64 /usr/local/lib64/* /usr/X11R6/lib /usr/X11R6/lib64 /usr/X11R6/lib64/* ; do
969        [ -h "$path" ] && continue
970        [ ! -e "$path/$fname_to_find" ] && continue
971        output="$path/$fname_to_find $output"
972        if [ -h "$path/$fname_to_find" ] ; then
973            output="`ReadAllLink $path/$fname_to_find` $output"
974        fi
975    done
976    if [ "$output" = "" ] ; then
977        return 1
978    fi
979    echo "$output"
980    return 0
981}
982
983LogProgress() {
984    local i progress modres noof_lines
985 
986    progress=$1
987    noof_lines=$2
988
989    echo -en "\r\t\t\t\t\t\t\t\t"
990    i=$(($progress*100))
991    if [ $noof_lines -ne 0 ]; then
992        i=$(($i/$noof_lines))
993    else
994        i=0
995    fi
996    echo -en "$i"
997    echo -en "%"
998    modres=$(($progress%4))
999    [ "$modres" -eq "0" ] && echo -en "\t/"
1000    [ "$modres" -eq "1" ] && echo -en "\t-"
1001    [ "$modres" -eq "2" ] && echo -en "\t\\"
1002    [ "$modres" -eq "3" ] && echo -en "\t|"
1003}
1004
1005# Called by TurnTgzIntoRdz, to make /tmp/mondo-restore.cfg
1006MakeMondoConfigFile() {
1007    local outfile use_lzo use_comp use_star
1008    outfile=$1
1009    > $outfile
1010    [ "$TAPESIZE" ]     && echo "media-size $TAPESIZE" >> $outfile
1011    [ "$TAPEDEV" ]          && echo "media-dev $TAPEDEV" >> $outfile
1012    [ "$USBDEVICE" ]            && echo "usb-dev $USBDEVICE" >> $outfile
1013    [ "$FILES_IN_FILELIST" ]    && echo "files-in-filelist $FILES_IN_FILELIST" >> $outfile
1014    [ "$LAST_FILELIST_NUMBER" ] && echo "last-filelist-number $LAST_FILELIST_NUMBER" >> $outfile
1015    [ "$INTERNAL_TAPE_BLOCK_SIZE" ] && echo "internal-tape-block-size $INTERNAL_TAPE_BLOCK_SIZE" >> $outfile
1016    use_lzo=$USE_LZO; [ "$use_lzo" = "" ] && use_lzo="no"
1017    use_gzip=$USE_GZIP; [ "$use_gzip" = "" ] && use_gzip="no"
1018    use_lzma=$USE_LZMA; [ "$use_lzma" = "" ] && use_lzma="no"
1019    use_comp=$USE_COMP; [ "$use_comp" = "" ] && use_comp="yes"
1020    use_star=$USE_STAR; [ "$use_star" = "" ] && use_star="no"
1021    echo "use-lzo $use_lzo" >> $outfile
1022    echo "use-gzip $use_gzip" >> $outfile
1023    echo "use-star $use_star" >> $outfile
1024    echo "use-lzma $use_lzma" >> $outfile
1025    echo "use-comp $use_comp" >> $outfile
1026    echo "datestamp `date`" >> $outfile
1027    [ "$ESTIMATED_TOTAL_NOOF_SLICES" ] && echo "total-slices $ESTIMATED_TOTAL_NOOF_SLICES" >> $outfile
1028    AddFileToCfgIfExists $MINDI_TMP/NETFS-DEV           netfs-dev           $outfile
1029    AddFileToCfgIfExists $MINDI_TMP/NETFS-PROTO         netfs-proto           $outfile
1030    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-IPADDR netfs-client-ipaddr $outfile
1031    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-NETMASK netfs-client-netmask $outfile
1032    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-BROADCAST netfs-client-broadcast $outfile
1033    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-HWADDR netfs-client-hwaddr $outfile
1034    AddFileToCfgIfExists $MINDI_TMP/NETFS-CLIENT-DEFGW  netfs-client-defgw  $outfile
1035    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-MOUNT  netfs-server-mount  $outfile
1036    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-USER  netfs-server-user  $outfile
1037    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-PATH   netfs-server-path   $outfile
1038    AddFileToCfgIfExists $MINDI_TMP/NETFS-SERVER-IPADDR netfs-server-ipaddr $outfile
1039    AddFileToCfgIfExists $MINDI_TMP/ISO-DEV           iso-dev           $outfile
1040    AddFileToCfgIfExists $MINDI_TMP/ISO-MNT           iso-mnt           $outfile
1041    AddFileToCfgIfExists $MINDI_TMP/ISO-PREFIX        iso-prefix        $outfile
1042    AddFileToCfgIfExists $MINDI_TMP/ISODIR            isodir            $outfile
1043    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.DEVICE bootloader.device $outfile
1044    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.NAME   bootloader.name   $outfile
1045    AddFileToCfgIfExists $MINDI_TMP/BOOTLOADER.VER    bootloader.ver   $outfile
1046    AddFileToCfgIfExists $MINDI_TMP/KEYMAP-LIVES-HERE keymap-lives-here $outfile
1047    AddFileToCfgIfExists $MINDI_TMP/TAPEDEV-HAS-DATA-DISKS tapedev-has-data-disks $outfile
1048    AddFileToCfgIfExists $MINDI_TMP/BACKUP-MEDIA-TYPE backup-media-type $outfile
1049    AddFileToCfgIfExists $MINDI_TMP/DIFFERENTIAL      differential      $outfile
1050    AddFileToCfgIfExists $MINDI_TMP/ACL      acl      $outfile
1051    AddFileToCfgIfExists $MINDI_TMP/XATTR      xattr      $outfile
1052    AddFileToCfgIfExists $MINDI_TMP/OBDR      obdr      $outfile
1053}
1054
1055# Get PV's for an LV
1056GetPVsForLV() {
1057  if [ -n "$1" ]; then
1058    vg=`$LVMCMD lvdisplay $1 2>/dev/null |awk '/VG Name/{print $NF;exit}'`
1059    if [ -z "$vg" ]; then
1060      return
1061    fi
1062    $LVMCMD vgdisplay -v $vg 2>/dev/null | awk '/PV Name/{print $NF}'
1063  fi
1064}
1065
1066
1067MakeMountlist() {
1068    local mountlist all_partitions current_partition \
1069partition_size partition_format outstring partition_number \
1070partition_mountpt c_p lwm_info psz lvm_dev unofficial_outstring \
1071absolute_partition old_partition_fmt current_lvolume uname skip
1072
1073    LogFile "------------------------------------"
1074    LogFile "Your raw fstab file looks like this:"
1075    LogFile "------------------------------------"
1076    cat $MY_FSTAB >> $LOGFILE
1077    LogAll "-----------------------------------"
1078    LogAll "Your mountlist will look like this:"
1079    LogAll "-----------------------------------"
1080
1081# mountlist(OUT)
1082    mountlist=$1
1083
1084# NB: partition = device
1085# NB: mountpt = where the device is mounted
1086
1087    [ -e "$MY_FSTAB" ] || Die "Cannot find your fstab file ($MY_FSTAB)"
1088
1089    [ "$mountlist" != "" ] && rm -Rf $mountlist
1090    > $mountlist
1091    all_partitions=""
1092   
1093    if [ $LVM != "false" ]; then
1094        LogAll "INFO: Analyzing LVM..."
1095        $MINDI_LIB/analyze-my-lvm > $MINDI_TMP/lvm.res
1096        if [ $? -ne 0 ]; then
1097            LVM="false"
1098        fi
1099        # Excluded LVs and GVs are not reported here
1100        all_partitions=`cat $MINDI_TMP/lvm.res | grep -F ">>>" | cut -d' ' -f2-`
1101    fi
1102    all_partitions="$all_partitions `ListAllPartitions 2> /dev/null`"
1103    for i in $IMAGE_DEVS ; do
1104        mount | grep -F "$i " > /dev/null 2> /dev/null && Die "Sorry, $i is already mounted! CANNOT DO IMAGEDEV on it if it's mounted."
1105    done
1106    [ "$IMAGE_DEVS" != "" ] && all_partitions="`echo "$all_partitions $IMAGE_DEVS" | tr ' ' '\n' | sort -u | tr '\n ' ' '`"
1107    printf "%-15s %-15s %-15s %-13s %-15s\n" DEVICE MOUNTPOINT FORMAT "SIZE MB" LABEL/UUID | tee -a $LOGFILE
1108    printf "%-15s %-15s %-15s %-13s %-15s\n" ------ ---------- ------  -------  ---------- | tee -a $LOGFILE
1109    useless_dev="/dev/floppy /dev/fd0h1440 /dev/fd0H1440 /dev/cdrom /dev/cdrom/cdrom /dev/cdrom/cdrom1 /dev/cdrom/cdrom2 /dev/cdrom0 /dev/cdrom1 /dev/cdrom2 /dev/cdrom3 /dev/cdrw /dev/scd /dev/ram :/ /dev/sr0 /dev/sr1 /dev/cdrom1 tmpfs devpts sysfs proc debugfs"
1110    for c_p in $all_partitions ; do
1111        # Skip fd/cd devices, network FS, cifs
1112        [ "`echo "$useless_dev" | grep -F "$c_p"`" != "" ] || [ "`echo "$c_p" | grep ":"`" != "" ] || [ "`echo "$c_p" | grep -E "^//"`" != "" ]&& continue
1113        [ "`echo "$c_p" | grep -x "/dev/cdroms.*"`" ] && continue
1114        if [ -h "$c_p" ] && [ "`echo "$c_p" | grep -F "/dev/hd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/sd"`" = "" ] && [ "`echo "$c_p" | grep -F "/dev/md"`" = "" ] ; then
1115            current_partition=`readlink -f $c_p`
1116            if [ "`echo "$current_partition" | grep -F "/dev/mapper"`" != "" ]; then
1117                current_partition="$c_p"
1118            elif [ "`echo $current_partition | grep -E '^/dev/dm-'`" ]; then
1119                # For SLES 11 type of distro, do not use dm devices as they are unable to be handled by lvm commands
1120                current_partition=`$MINDI_LIB/analyze-my-lvm --givevglvofdm $current_partition`
1121            fi
1122            [ "`echo "$useless_dev" | grep -F "$current_partition"`" ] && continue
1123        else
1124            current_partition="$c_p"
1125        fi
1126        [ "$c_p" = "none" ] && continue
1127        redhat_label=""
1128        label=""
1129        uuid=""
1130        absolute_partition=`readlink -f $c_p`
1131        partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$current_partition" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1132
1133        # set default in case we dont't find it
1134        str_to_find_fmt_with=$current_partition
1135
1136        # This part tries to retrieve the correct device from a LABEL line in /etc/fstab
1137        # current_partition contains only first column of /etc/fstab
1138        if [ "`echo "$current_partition" | grep -i "LABEL="`" != "" ]; then
1139            redhat_label=`echo "$current_partition" | cut -d'=' -f2`
1140            actual_dev=""
1141
1142            # 1st try, findfs - the RHEL way of finding labels and their partitions
1143            if [ -x "/sbin/findfs" ]; then
1144                actual_dev=`/sbin/findfs LABEL="${redhat_label}" 2> /dev/null`
1145            fi
1146   
1147            # 2nd try : blkid, the good way for all LABEL except swap
1148            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1149                actual_dev=`/sbin/blkid | grep "$redhat_label" | grep LABEL= | cut -d':' -f1`
1150                # For LVM FS it will give a /dev/dm-# which should then be converted
1151                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1152                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1153                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1154                    for dev in `ls /dev/mapper/*`; do
1155                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1156                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1157                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1158                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1159                            break
1160                        fi
1161                    done
1162                fi
1163            fi
1164   
1165            # 3rd try, which works on a standard partition (ext2/3), but not on swap
1166            # For LVM gives a /dev/mapper entry
1167            if [ "x$actual_dev" = "x" ]; then
1168                actual_dev=`/bin/mount -l | grep "\[$redhat_label\]" | cut -d' ' -f1`
1169            fi
1170   
1171            # 4th try, with vol_id
1172            # SWAP only
1173            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1174                list_swaps=`cat /proc/swaps | grep "/dev/" | $AWK '{ print $1 }' `
1175                for dev_swap in $list_swaps ; do
1176                    dev_exists=`/sbin/vol_id $dev_swap | grep "$redhat_label"`
1177                    if [ "x$dev_exists" != "x" ]; then
1178                        actual_dev=$dev_swap
1179                        break;
1180                    fi
1181                done
1182            fi
1183
1184            # 5th try : pre-formated LABEL. Format is : LABEL=SWAP-mydevice or SW-mydevice. e.g. : LABEL=SWAP-hda5
1185            # LABEL=SW-cciss/c0d0p3 (RDP)
1186            # or could be a string that isn't a complete device name (eg. LABEL =SWAP-cciss/c0d0p)
1187            # SWAP only
1188            if [ "x$actual_dev" = "x" -a  _"`echo $current_partition | grep -iE 'LABEL=SWAP|LABEL=SW-'`" != _"" ]; then
1189                    skip=""
1190                    uname=$KERVERRUN
1191                    [ "`echo $uname | grep "2.4.[0-9]"`" != "" ] && skip=16
1192                    # 2.6.12 needs 16 (FC3)
1193                    [ "`echo $uname | grep "2.6.[0-1]"`" != "" ] && skip=16
1194                    # 2.6.19 and upper needs 1052
1195                    [ "`echo $uname | grep "2.6.19"`" != "" ] && skip=1052
1196                    [ "`echo $uname | grep "2.6.[2-9]"`" != "" ] && skip=1052
1197                    [ "`echo $uname | grep "3.[0-9]*.[0-9]*"`" != "" ] && skip=1052
1198                    if [ $skip = "" ]; then
1199                        Die "Your kernel is too old. I don't know how to support labelled swap spaces with it"
1200                    fi
1201                    for try_dev in `tail +2 /proc/swaps | cut -d' ' -f1`
1202                    do
1203                        # Location of the swap label for kernel 2.6
1204                        try_dev_label=`dd bs=1 count=16 skip=$skip if=$try_dev 2> /dev/null`
1205                        if [ "x$try_dev_label" = "x$redhat_label" ]; then
1206                            actual_dev=$try_dev
1207                        fi
1208                    done
1209            fi
1210
1211            # Check if one of all those tries has known success
1212            if [ "x$actual_dev" != "x" ]; then
1213                current_partition=$actual_dev
1214            else
1215                Die "Your system uses a LABEL partition ($current_partition), but you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or install findfs|blkid|vol_id"
1216            fi
1217        # This part tries to retrieve the correct device from a UUID line in /etc/fstab
1218        # current_partition contains only first column of /etc/fstab
1219        elif [ "`echo "$current_partition" | grep -i "UUID="`" != "" ]; then
1220            uuid=`echo "$current_partition" | cut -d'=' -f2`
1221            actual_dev=""
1222
1223            # 1st try, findfs - the RHEL way of finding labels and their partitions
1224            if [ -x "/sbin/findfs" ]; then
1225                actual_dev=`/sbin/findfs UUID=${uuid} 2> /dev/null`
1226            fi
1227   
1228            # 2nd try : blkid, the good way for all UUID except swap
1229            if [ "x$actual_dev" = "x" -a -x "/sbin/blkid" ]; then
1230                actual_dev=`/sbin/blkid | grep "$uuid" | grep UUID= | cut -d':' -f1`
1231                # For LVM FS it will give a /dev/dm-# which should then be converted
1232                if [ $LVM = "v2" ] && [ "`echo $actual_dev | grep '/dev/dm'`" ]; then
1233                    major=`/bin/ls -l $actual_dev | $AWK '{print $5}'`
1234                    minor=`/bin/ls -l $actual_dev | $AWK '{print $6}'`
1235                    for dev in `ls /dev/mapper/*`; do
1236                        major1=`/bin/ls -l $dev | $AWK '{print $5}'`
1237                        minor1=`/bin/ls -l $dev | $AWK '{print $6}'`
1238                        if [ $major1 = $major ] && [ $minor1 = $minor ]; then
1239                            actual_dev=`/bin/ls -l $dev | $AWK '{print $10}'`
1240                            break
1241                        fi
1242                    done
1243                fi
1244            fi
1245   
1246            # 3th try, with vol_id
1247            if [ "x$actual_dev" = "x" -a -x "/sbin/vol_id" ]; then
1248                list_dev=`mount | grep -E '^/' | $AWK '{ print $1 }' `
1249                for dev in $list_dev ; do
1250                    dev_exists=`/sbin/vol_id $dev | grep "$uuid"`
1251                    if [ "x$dev_exists" != "x" ]; then
1252                        actual_dev=$dev
1253                        break;
1254                    fi
1255                done
1256            fi
1257
1258            # 4th try, with dumpuuid (VMWare only ?) for swap
1259            if [ "x$actual_dev" = "x" -a -x "/sbin/dumpuuid" ]; then
1260                list_dev=`cat /proc/swaps | grep -E '^/' | $AWK '{ print $1 }' `
1261                for dev in $list_dev ; do
1262                    dev_exists=`/sbin/dumpuuid $dev | grep "$uuid"`
1263                    if [ "x$dev_exists" != "x" ]; then
1264                        actual_dev=$dev
1265                        break;
1266                    fi
1267                done
1268            fi
1269
1270            # Check if one of all those tries has known success
1271            if [ "x$actual_dev" != "x" ]; then
1272                current_partition=$actual_dev
1273            else
1274                Die "Your system uses a UUID partition ($current_partition),\nbut you lack the tool to support it.\nPlease replace labels with their correct devices in $MY_FSTAB or\ninstall findfs|blkid|vol_id or\nrelabel the partition with the correct UUID if it's a swap partition."
1275            fi
1276        else
1277            # Needs to handle the recent OpenSUSE fancy way of dealing with fstab :-(
1278            # they use symlinks in fstab unrelated to what is shown in mount !
1279            if [ _"$partition_mountpt" = _"" ]; then
1280                # set default in case we dont't find it
1281                for tmpp in `tr -s '\t' ' ' < $MY_FSTAB | grep -Ev "^#" | $AWK '{print $1}'`; do
1282                        if [ _"`readlink -f $tmpp`" = _"`readlink -f $current_partition`" ]; then
1283                            str_to_find_fmt_with=$tmpp
1284                            partition_mountpt=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$tmpp" | grep -vx " *#.*" | $AWK '{print $2}' | head -n1`
1285                            break;
1286                        fi
1287                done
1288            fi
1289        fi
1290
1291        # Detects noauto partitions not mounted and exclude them
1292        partition_option=`tr -s '\t' ' ' < $MY_FSTAB | grep -w "$str_to_find_fmt_with" | grep -vx " *#.*" | $AWK '{print $4}' | head -n1`
1293        if [ "`echo "$partition_option" | grep -i noauto`" != "" ] && [ "`mount | grep -w "$partition_mountpt"`" =  "" ] ; then
1294                LogFile "INFO: Excluding $current_partition from mountlist (due to noauto option in fstab)"
1295            continue
1296        fi
1297        # Detects bind partitions and exclude them
1298        if [ "`echo "$partition_option" | grep -iw bind`" != "" ]; then
1299                LogFile "INFO: Excluding $current_partition from mountlist (due to bind option in fstab)"
1300            continue
1301        fi
1302
1303        # Look for devices which have to be excluded
1304        skip=0
1305        if [ "$MINDI_EXCLUDE_DEVS" ] ; then
1306            l=""
1307            list_of_devices="`ReadAllLink $current_partition`"
1308            for d in $list_of_devices; do
1309                l="$l `$MINDI_LIB/analyze-my-lvm --givemapperofdm $d`"
1310            done
1311
1312            # Remove PVs from LVs excluded
1313            l="$l `GetPVsForLV $current_partition`"
1314
1315            # We want a single unique list
1316            list_of_devices="`echo $l | sort -u`"
1317
1318            for d in `echo $MINDI_EXCLUDE_DEVS | sed 's/|/ /g'`; do
1319                if  [ "`echo " $list_of_devices " | grep " $d"`" != "" ]; then
1320                    LogFile "INFO: Excluding $current_partition from mountlist (due to excluded device $d)"
1321                    skip=1
1322                    continue
1323                fi
1324            done
1325        fi
1326        if [ $skip -eq 1 ]; then
1327            continue
1328        fi
1329
1330        partition_format=`$AWK '$1 == "'"$str_to_find_fmt_with"'" {print $3}' $MY_FSTAB`
1331        # Detects iso9660 ISO images and exclude them
1332        if [ "`echo "$partition_format" | grep -iw iso9660`" != "" ]; then
1333                LogFile "INFO: Excluding $current_partition from mountlist (due to iso9660 format in fstab)"
1334            continue
1335        fi
1336        # Some distributions such as Debian do not put /dev/<VG>/<LV> in fstab
1337        # for LVM partitions but use /dev/mapper/<VG>-<LV> instead. Fortunately,
1338        # the former is then a link to the latter, so we test whether
1339        # $current_partition is actually such a link or not and set
1340        # $current_lvolume accordingly. On Debian you may find more than one answer
1341        # so we remove the one corresponding to /dev/.static
1342        # On RedHat even if the device name is different (/dev/mapper/<VG><LV>), the
1343        # principle is the same and we need to find the link to it as well.
1344        # Note that $current_lvolume may well be an
1345        # ordinary device. It is just to make sure that we feed the right value
1346        # into any of the LVM tools if possible.
1347
1348        current_lvolume="$current_partition"
1349        if [ $LVM = "v2" ] && [ "`echo $current_partition | grep -E '^/dev/mapper/'`" ]; then
1350            # .static dir are a Debian specificity
1351            current_lvolume="`find /dev -lname "$current_partition" | grep -Ev '^/dev/\.static/'`"
1352            echo $current_lvolume | grep -q ' '
1353            if [ $? -eq 0 ]; then
1354                LogFile "WARNING: Multiple Logical Volumes found. Report to dev team"
1355            fi
1356            # if it's not found, it may well be a real device such as a multipath one
1357            # /dev/mapper/mpath... Thus we revert the situation so that next test succeed
1358            if [ _"$current_lvolume" = _"" ]; then
1359                current_lvolume="$current_partition"
1360            fi
1361        fi
1362        #
1363        # End of LVM device style variation code (other than $current_lvolume).
1364
1365        if [ $LVM != "false" ] && [ "`$LVMCMD lvdisplay $current_lvolume 2> /dev/null`" ]; then
1366            # Size computed via LVM not directly
1367            partition_size="lvm"
1368        else
1369            [ "`echo "$current_partition" | grep "[0-9]"`" = "" ] && continue
1370            [ "`echo "$current_partition" | grep -c "^/"`" -ne "1" ] && continue
1371            if [ "$partition_format" = "swap" ] || [ "$partition_mountpt" = "swap" ] ; then
1372                # Skip swap files
1373                [ "`echo "$current_partition" | grep -E "^/dev"`" = "" ] && continue
1374                partition_size=`grep -Fv "Priority" /proc/swaps | tr -s '\t' ' ' | grep -F "$current_partition " | $AWK '{print $3}'`
1375                [ "$partition_mountpt" != "swap" ] && partition_mountpt="swap"
1376                [ "$partition_format" != "swap" ] && partition_format="swap"
1377                if [ "$partition_size" = "" ] ; then
1378                    totalsize=0
1379                    items=0
1380                    for i in `tr -s ' ' '\t' < /proc/swaps | grep -Fv "Filename" | cut -f3` ; do
1381                        totalsize=$(($totalsize+$i))
1382                        items=$(($items+1))
1383                    done
1384                    [ "$items" -gt "0" ] && partition_size=$(($totalsize/$items)) || partition_size=0
1385                    [ "$partition_size" -lt "125000" ] && partition_size=125000
1386                    LogFile "INFO: I'm guessing $c_p is $(($partition_size/1024))MB"
1387                fi
1388            else
1389                partition_size=`SizeOfPartition $current_partition`
1390            fi
1391        fi
1392        [ "$partition_mountpt" = "swap" ] && partition_format="swap"
1393        [ "$partition_format" = "swap" ] && partition_mountpt="swap"
1394        if [ "$partition_mountpt" = "" ] ; then
1395            if [ "`$LVMCMD pvdisplay $current_lvolume 2> /dev/null`" != "" ] ; then
1396                if  [ "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1397                    partition_mountpt="raid"
1398                    partition_format="raid"
1399                else
1400                    partition_mountpt="lvm"
1401                    partition_format="lvm"
1402                fi
1403            fi
1404        fi
1405        psz=$partition_size
1406        LogFile "INFO: Examining $current_partition (mount=$partition_mountpt fmt=$partition_format psz=$psz)"
1407        [ "$psz" != "lvm" ] && psz=$(($psz/1024))
1408        if [ "`echo " $IMAGE_DEVS " | grep -F " $current_partition "`" != "" ] ; then
1409            partition_mountpt="image"
1410            old_partition_fmt=$partition_format
1411            partition_format="`$FDISK -l 2>> $LOGFILE | tr '*' ' ' | tr '+' ' ' | tr -s ' ' '\t' | grep -w "$absolute_partition" | cut -f5`"
1412            partition_size=$(($partition_size+1)); # just in case
1413            if [ "$partition_format" = "Linux" ] ; then
1414                LogFile "WARNING: Are you imaging a mounted swap partition? Silly..."
1415                LogFile "WARNING: Reverting format from $old_partition_fmt to $partition_format"
1416                partition_format=$old_partition_fmt
1417            fi
1418        fi
1419
1420        if [ ! "$partition_mountpt" ] ; then
1421            LogFile "------- $FDISK -l $qq log ------------"
1422            for qq in "" `find /dev/ida/c*d* ! -name '*p*' 2> /dev/null`; do
1423                partition_format=`$FDISK -l $qq 2>> $LOGFILE | grep -w "$c_p" | sed 's/12/|/' | tr -s '\t' ' ' | cut -d'|' -f2 | cut -d' ' -f2-9`
1424                [ "$partition_format" ] && break
1425            done
1426            LogFile "------- $FDISK log end ------------"
1427            if [ "$partition_format" = "Compaq diagnostics" ] ; then
1428                partition_format="compaq"
1429            elif [ ! "`grep -F device /etc/raidtab 2> /dev/null | grep -w $current_partition`" ] ; then
1430                LogAll "WARNING: Unable to find mountpoint of $current_partition - ignoring"
1431                continue
1432            fi
1433        fi
1434        if [ "$redhat_label" ]; then
1435            label="$redhat_label"
1436        elif [ "$uuid" ]; then
1437            label="$uuid"
1438        fi
1439
1440        # On RHEL 7 they use UUID concretely, even when not mentioned in fstab
1441        # in order to mount the root part e.g. in grub.
1442        # One way to solve this is to add the UUID now, if there wasn't one so it's
1443        # restored correctly
1444        if [ _"$label" = _"" ]; then
1445            label=`blkid $current_partition | perl -p -e 's/.* UUID="([A-z0-9-]+)" .*/$1/'`
1446        fi
1447
1448        partition_format="`echo "$partition_format" | cut -d',' -f1`"; # in case user has ext3,ext2 or something dumb like that
1449        [ "$partition_format" = "auto" ] && partition_format="`mount | grep -w $current_partition | $AWK '{print$5;}'`"; # in case user uses 'auto' (dumb!)
1450        unofficial_outstring=`printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label"`
1451        if [ "$current_partition" = "" ] ; then
1452            LogFile "WARNING: Unknown partition (outstring = $unofficial_outstring)"
1453        elif [ "$partition_mountpt" = "" ] && [ -f "/etc/raidtab" ] ; then
1454            if [ "`grep -F device /etc/raidtab 2>/dev/null | grep -F $current_partition`" ] ; then
1455                partition_mountpt=raid
1456                partition_format=raid
1457                printf "%-15s %-15s %-15s %7s %15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1458                printf "%s %s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1459            else
1460                LogFile "WARNING: Unknown mountpoint (outstring = $unofficial_outstring)"
1461            fi
1462        elif [ "$partition_format" = "" ] ; then
1463            LogFile "WARNING: Unknown format (outstring = $unofficial_outstring)"
1464        elif [ "$partition_size" = "" ] ; then
1465            LogFile "WARNING: Unknown partition size (outstring = $unofficial_outstring)"
1466        elif [ "$partition_mountpt" = "/proc" ] || [ "$partition_mountpt" = "/dev/pts" ] ; then
1467            continue
1468        else
1469            if [ "$partition_format" = "dos" ] || [ "$partition_format" = "msdos" ] ; then
1470                LogFile "WARNING: vfat should be used instead of dos/msdos as a partition format"
1471                partition_format="vfat"
1472            fi
1473            printf "%-15s %-15s %-15s %7s %-15s\n" $current_partition $partition_mountpt $partition_format $psz "$label" | tee -a $LOGFILE
1474            printf "%s %s %s %s %s\n" $current_partition $partition_mountpt $partition_format $partition_size "$label" >> $mountlist
1475        fi
1476    done
1477    LogAll "-----------------------------------" 
1478}
1479
1480CheckMountlist() {
1481    local file=$1
1482    # Coherency verification
1483    ML01=`cat $file | wc -l`
1484    ML02=`grep -vE ' lvm | raid | swap ' $file | wc -l`
1485    ML1=`$AWK '{print $1}' $file | sort -u | wc -l`
1486    ML2=`grep -vE ' lvm | raid | swap ' $file | $AWK '{print $2}' | sort -u | wc -l`
1487    if [ "$ML01" -ne "$ML1" ]; then
1488        LogFile "--------------------------------------------"
1489        LogAll "WARNING: Duplicate device entry in mountlist"
1490        LogFile "--------------------------------------------"
1491    fi
1492    if [ "$ML02" -ne "$ML2" ]; then
1493        LogFile "--------------------------------------------"
1494        LogAll "WARNING: Duplicate mountpoint entry in mountlist"
1495        LogFile "------------------------------------------------"
1496    fi
1497}
1498
1499OfferToMakeBootableISO() {
1500    local i old_pwd
1501    if [ -z "$ISO_CMD" ]; then
1502        LogAll "ERROR: Neither mkisofs nor genisoimage found, unable to make CD image"
1503        return
1504    fi
1505    if [ "$PROMPT_MAKE_CD_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1506        echo -en "Shall I make a bootable CD image? (y/[n]) "
1507        read i
1508        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1509    fi
1510    rm -Rf $MINDI_TMP/iso
1511    mkdir -p $MINDI_TMP/iso/{images,archives}
1512    LogFile "INFO: mindi_lib = $MINDI_LIB"
1513    cp -f $MINDI_CACHE/{*.gz,*.img} $MINDI_TMP/iso/images 2>> $LOGFILE || LogAll "WARNING: OfferToMakeBootableISO: Cannot copy $MINDI_CACHE/*.gz to $MINDI_TMP/iso/images"
1514    for i in memdisk memtest.bin memtest.img ; do
1515        j=$MINDI_LIB/$i
1516        k=$MINDI_TMP/iso
1517        if [ -e "$j" ] ; then
1518            LogAll "INFO: Copying $j to $k"
1519            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1520            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1521            if [ _"$MONDO_SHARE" != _"" ]; then 
1522                cp -f $j $MONDO_ROOT 2>> $LOGFILE || Die "Failed to copy $j to $MONDO_ROOT"
1523            fi
1524        fi
1525    done
1526    MakeMessageFile $MINDI_TMP/iso | cut -c1-80 > $MINDI_TMP/iso/message.txt
1527    if [ $KERNEL_IS_XEN = "yes" ]; then
1528        FindMboot32Binary
1529        cp $xenkernelpath $MINDI_TMP/iso/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MINDI_TMP/iso/xen.gz). Did you run out of disk space?"
1530        cp $MBOOTC32 $MINDI_TMP/iso/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MINDI_TMP/iso/mboot.c32). Did you run out of disk space?"
1531    fi
1532    # Useful for syslinux 5.x
1533    FindLdlinux32Binary
1534    if [ -e $LDLINUXC32 ]; then
1535        cp $LDLINUXC32 $MINDI_TMP/iso/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to mindi tmp ($MINDI_TMP/iso/ldlinux.c32). Did you run out of disk space?"
1536    fi
1537    cp $kernelpath $MINDI_TMP/iso/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/iso/vmlinuz). Did you run out of disk space?"
1538    cp $MINDI_TMP/initrd.img $MINDI_TMP/iso/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MINDI_TMP/iso/initrd.img. Did you run out of disk space?"
1539
1540    if [ _"$MONDO_SHARE" != _"" ]; then 
1541        if [ $KERNEL_IS_XEN = "yes" ]; then
1542            cp $xenkernelpath $MONDO_ROOT/xen.gz 2>> $LOGFILE || Die "Cannot copy xen.gz ($xenkernelpath) to mindi tmp ($MONDO_ROOT/xen.gz). Did you run out of disk space?"
1543            cp $MBOOTC32 $MONDO_ROOT/mboot.c32  2>> $LOGFILE || Die "Cannot copy mboot.c32 ($MBOOTC32) to mindi tmp ($MONDO_ROOT/mboot.c32). Did you run out of disk space?"
1544        fi
1545        if [ -e $LDLINUXC32 ]; then
1546            cp $LDLINUXC32 $MONDO_ROOT/ldlinux.c32  2>> $LOGFILE || Die "Cannot copy ldlinux.c32 ($LDLINUXC32) to $MONDO_ROOT/ldlinux.c32. Did you run out of disk space?"
1547        fi
1548        cp $kernelpath $MONDO_ROOT/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mondo root ($MONDO_ROOT/vmlinuz). Did you run out of disk space?"
1549        cp $MINDI_TMP/initrd.img $MONDO_ROOT/initrd.img 2>> $LOGFILE || Die "Cannot copy initrd.img ($MINDI_TMP/initrd.img) to $MONDO_ROOT/initrd.img. Did you run out of disk space?"
1550    fi
1551    MakeBootConfFile isolinux > $MINDI_TMP/iso/isolinux.cfg
1552    if [ "$ARCH" != "ia64" ] ; then
1553        cp $ISOLINUX $MINDI_TMP/iso/isolinux.bin 2>> $LOGFILE || Die "Cannot copy isolinux.bin ($ISOLINUX) to $MINDI_TMP/iso - did you run out of disk space?"
1554    fi
1555    old_pwd=`pwd`
1556    cd "$MINDI_TMP/iso"
1557    if [ "$ARCH" != "ia64" ] ; then
1558        if [ _"$MONDO_SHARE" != _"" ]; then 
1559            cp -f $MINDI_TMP/iso/{isolinux.cfg,initrd.img,vmlinuz,isolinux.bin,message.txt,boot*.txt,pxe.txt} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1560            if [ -e $MINDI_TMP/iso/ldlinux.c32 ]; then
1561                cp $MINDI_TMP/iso/ldlinux.c32 $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy ldlinux.c32 (from $MINDI_TMP/iso/$LDLINUXC32) to $MONDO_ROOT. Did you run out of disk space?"
1562            fi
1563            if [ $KERNEL_IS_XEN = "yes" ]; then
1564                cp -f $MINDI_TMP/iso/{mboot.c32,xen.gz} $MONDO_ROOT 2>> $LOGFILE || Die "Cannot copy Xen core files to ramdisk for boot disk (under $MONDO_ROOT). Did you run out of disk space?"
1565            fi
1566            cp -f $MONDO_SHARE/autorun $MINDI_TMP/iso 2>> $LOGFILE
1567        fi
1568        $ISO_CMD -U $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table . > /dev/null 2> $MINDI_TMP/mkisofs.log
1569    else
1570        $ISO_CMD $ISO_OPT -V Mindi_Image -o $MINDI_CACHE/mindi.iso -b images/mindi-bootroot.$BOOT_SIZE.img -c images/boot.cat -no-emul-boot . > /dev/null 2> $MINDI_TMP/mkisofs.log
1571    fi
1572    if [ "$?" -ne "0" ] ; then
1573        LogFile "----------- $ISO_CMD's errors --------------"
1574        LogAll "$ISO_CMD returned the following errors:"
1575        cat $MINDI_TMP/mkisofs.log | tee -a $LOGFILE
1576        LogAll "ERROR: Failed to create ISO image."
1577    else
1578        LogAll "INFO: Created bootable ISO image at $MINDI_CACHE/mindi.iso"
1579    fi
1580    rm -f $MINDI_TMP/mkisofs.log
1581    cd "$old_pwd"
1582}
1583
1584
1585OfferToMakeBootableUSB() {
1586    local i
1587    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ _"$MONDO_SHARE" = _"" ]; then
1588        echo -n "Shall I make a bootable USB device ? (y/[n]) "
1589        read i
1590        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1591        if [ "$USBDEVICE" = "" ]; then
1592            echo -en "Please enter the device name of your USB device (e.g. /dev/sda) : "
1593            read dev
1594            USBDEVICE=$dev
1595        fi
1596        echo "WARNING: This will erase all content on $USBDEVICE"
1597        echo -en "Are you sure you want to use $USBDEVICE (y/[n]) "
1598        read i
1599        [ "$i" != "y" ] && [ "$i" != "Y" ] && return 0
1600    fi
1601    rm -Rf $MINDI_TMP/usb
1602    mkdir -p $MINDI_TMP/usb
1603    USBPART="${USBDEVICE}1"
1604
1605    echo -en "Transforming $USBDEVICE in a Bootable device " 
1606    echo -en "."
1607    LogFile "INFO: Transforming $USBDEVICE in a Bootable device"
1608    LogFile "INFO: Checking $USBDEVICE"
1609    $FDISK -l $USBDEVICE 2>&1 >> $LOGFILE
1610    if [ $? -ne 0 ]; then
1611        LogAll "ERROR: Unable to access $USBDEVICE"
1612        LogAll "       Make sure your USB device is plugged in"
1613        MindiExit -1
1614    fi
1615    echo -en "."
1616    # Some distro do auto mount at that point (Ubuntu)
1617    LogFile "INFO: Unmounting $USBPART just in case"
1618    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1619    # If your key has no MBR it may cause an issue
1620    # Use dd if=mbr.bin of=$USBDEVICE or ms-sys -s $USBDEVICE
1621    if [ -r $MBRFILE ]; then
1622        LogAll "INFO: Installing an MBR ($MBRFILE) on $USBDEVICE"
1623        dd if=$MBRFILE of=$USBDEVICE
1624    else
1625        LogAll "WARNING: You may need to install an MBR (usually in $MBRFILE, but not found on your system)"
1626        LogAll "         on $USBDEVICE with dd if=$MBRFILE of=$USBDEVICE"
1627    fi
1628    LogFile "INFO: Preparing $USBDEVICE"
1629    cat > $MINDI_TMP/fdisk.txt << EOF
1630d
1631d
1632d
1633d
1634n
1635p
16361
1637
1638
1639t
1640b
1641a
16421
1643w
1644EOF
1645    $FDISK $USBDEVICE 2>> $LOGFILE 1>> $LOGFILE < $MINDI_TMP/fdisk.txt
1646    if [ $? -ne 0 ]; then
1647        LogAll "ERROR: Unable to create a vfat Filesystem on $USBDEVICE"
1648        LogAll "       Make sure your USB device is plugged in"
1649        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1650        MindiExit -1
1651    fi
1652    LogFile "fdisk build file"
1653    LogFile "----------------"
1654    cat $MINDI_TMP/fdisk.txt >> $LOGFILE
1655    LogFile "----------------"
1656    rm -f $MINDI_TMP/fdisk.txt
1657    LogFile "INFO: The USB device $USBDEVICE now looks like this:"
1658    $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1659    echo -en "."
1660    # Calling kpartx in case devices were not created
1661    if [ -x "/sbin/kpartx" ]; then
1662        /sbin/kpartx -a $USBDEVICE
1663    fi
1664    # Some distro do auto mount at that point (Ubuntu)
1665    LogFile "INFO: Unmounting $USBPART just in case again"
1666    umount $USBPART 2>> $LOGFILE 1>> $LOGFILE
1667    echo -en "."
1668    # Some distro have a dmsetup conf at that point so removing it Cf: http://trac.mondorescue.org/ticket/651
1669    if [ "`which dmsetup`" != "" ]; then
1670        block_id="`echo $USBPART | sed 's|/dev/||g'`"
1671        if [[ "`dmsetup ls | awk '{print $1}' | grep $block_id`" != "" ]]; then
1672            LogFile "INFO: Removing $block_id from device mapper."
1673            sleep 1
1674            dmsetup remove $block_id
1675        fi
1676    fi
1677    echo -en "."
1678    LogFile "INFO: Creating a vfat filesystem on $USBPART"
1679    mkdosfs -F 32 $USBPART 2>&1 >> $LOGFILE
1680    if [ $? -ne 0 ]; then
1681        LogAll "ERROR: Unable to create a vfat filesystem on $USBPART"
1682        LogAll "       Make sure your USB device is plugged in and partitioned ($USBPART must exist on it)"
1683        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1684        MindiExit -1
1685    fi
1686    echo -en "."
1687    LogFile "INFO: Mounting $USBPART on $MINDI_TMP/usb"
1688    mount $USBPART $MINDI_TMP/usb 2>> $LOGFILE
1689    if [ $? -ne 0 ]; then
1690        LogAll "ERROR: Unable to mount $USBPART on $MINDI_TMP/usb"
1691        LogAll "       Make sure your USB device is plugged in, partitioned and formated ($USBPART must exist on it)"
1692        $FDISK -l $USBDEVICE 2>&1 | tee -a $LOGFILE
1693        MindiExit -1
1694    fi
1695    echo -en "."
1696    mkdir -p $MINDI_TMP/usb/images
1697    cp -f $MINDI_CACHE/*.img $MINDI_CACHE/*.gz $MINDI_TMP/usb/images 2>> $LOGFILE || LogAll "ERROR: OfferToMakeBootableUSB: Cannot copy $i to $MINDI_TMP/usb/images"
1698    echo -en "."
1699    LogFile "INFO: mindi_lib = $MINDI_LIB"
1700    for i in memdisk memtest.bin memtest.img ; do
1701        j=$MINDI_LIB/$i
1702        k=$MINDI_TMP/usb
1703        if [ -e "$j" ] ; then
1704            LogIt "INFO: Copying $j to $k"
1705            cp -f $j $k 2>> $LOGFILE || Die "Failed to copy $j to $k"
1706            cp -f $j $MINDI_TMP 2>> $LOGFILE || Die "Failed to copy $j to $MINDI_TMP"
1707        fi
1708    done
1709    echo -en "."
1710    MakeMessageFile $MINDI_TMP/usb | cut -c1-80 > $MINDI_TMP/usb/message.txt
1711    echo -en "."
1712    cp $kernelpath $MINDI_TMP/usb/vmlinuz 2>> $LOGFILE || Die "Cannot copy vmlinuz ($kernelpath) to mindi tmp ($MINDI_TMP/usb/vmlinuz). Did you run out of disk space?"
1713    echo -en "."
1714    cp $MINDI_TMP/initrd.img $MINDI_TMP/usb/initrd.img 2>> $LOGFILE
1715    echo -en "."
1716    MakeBootConfFile syslinux > $MINDI_TMP/usb/syslinux.cfg
1717    echo -en "."
1718    LogAll "----------- syslinux's conf --------------"
1719    cat $MINDI_TMP/usb/syslinux.cfg |tee -a $LOGFILE
1720    LogAll "------------------------------------------"
1721    umount $MINDI_TMP/usb
1722    if [ "$ARCH" != "ia64" ] ; then
1723        syslinux -v 2>&1 | grep -q 4.02
1724        if [ $? -eq 0 ]; then
1725            # This buggy version of syslinux requires a call to --stupid and not -s
1726            syslinux --stupid $USBPART 2>> $MINDI_TMP/syslinux.log
1727            res=$?
1728        else
1729            syslinux -s $USBPART 2>> $MINDI_TMP/syslinux.log
1730            res=$?
1731        fi
1732        if [ $res -ne 0 ] ; then
1733            LogAll "----------- syslinux's errors --------------"
1734            cat $MINDI_TMP/syslinux.log |tee -a $LOGFILE
1735            LogAll "------------------------------------------"
1736            LogIt "ERROR: Failed to create USB image."
1737        else
1738            echo -e "$DONE"
1739            LogFile "INFO: Created bootable USB image on $USBDEVICE"
1740        fi
1741        rm -f $MINDI_TMP/syslinux.log
1742    else
1743        LogAll "ERROR: No USB boot support for ia64"
1744        MindiExit -1
1745    fi
1746}
1747
1748
1749MakeMessageFile() {
1750   
1751    if [ -x "/bin/lsb_release" ]; then
1752        DESC=`/bin/lsb_release -d | cut -d: -f2 | sed "s/[ \t]*//"`
1753    elif [ -r /etc/arch-release ]; then  # this code must be written before /etc/issue test to avoid errors
1754        DESC="Arch Linux"
1755        if [ -r /var/log/pacman.log ]; then
1756            # there are no releases but we can get the last system upgrade
1757            # Output example:   Arch Linux [2011-03-03 01:39]
1758            DESC="$DESC $(tac /var/log/pacman.log | grep -m1 'full system upgrade' | cut -d']' -f1)]"
1759        fi
1760    elif [ -r /etc/issue.net ]; then
1761        DESC=`head -1 /etc/issue.net`
1762    elif [ -r /etc/issue ]; then
1763        DESC=`head -1 /etc/issue`
1764    elif [ -x "/usr/bin/pbdistrocheck" ]; then
1765        # For pb >= 0.9.8
1766        DESC=`/usr/bin/pbdistrocheck -s | cut -d, -f1-4`
1767    else
1768        DESC="Unknown desc"
1769    fi
1770    sed "s/ZZZZZ/$MINDI_VERSION/" $MINDI_LIB/msg-txt | sed "s/KKKKK/Kernel $KERVER/" | sed "s/AAAAA/on a $ARCH architecture/" | sed "s/TTTTT/`LC_TIME=C date`/" | sed "s/MMMMM/`hostname`/" | sed "s/DDDDD/$DESC/"
1771    if [ _"$MONDO_SHARE" != _"" ]; then
1772        if [ "$CDRECOVERY" != "yes" ] ; then
1773            if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1774                echo -en "Press <enter> to continue.\n"
1775                echo -en "$BOOT_MEDIA_MESSAGE"
1776            elif [ ! "$MINDI_TMP" ] ; then
1777                echo -en "FYI, this is _not_ a Mondo Rescue CD.\n"
1778                if [ -e "$MINDI_LIB/memtest.img" ] ; then
1779                 echo -en "Type 'memtest' <Enter> to test your PC's memory intensively.\nJust press <Enter> to go to the main test menu.\n"
1780                fi
1781            else
1782                echo -en "$BOOT_MEDIA_MESSAGE"
1783            fi
1784        else
1785            echo -en "\
1786To restore your disk to factory defaults, type 'RESTORE' <enter>.\n\
1787CAUTION: THIS WILL ERASE YOUR WHOLE DISK !!!\n"
1788        fi
1789    fi
1790
1791    # Also create the other help screens
1792    head -24 $MINDI_CONF/README.bootparam | cut -c1-80 > $1/boot1.txt
1793    head -48 $MINDI_CONF/README.bootparam | tail -24 | cut -c1-80 > $1/boot2.txt
1794    head -24 $MINDI_CONF/README.pxe | cut -c1-80 > $1/pxe.txt
1795}
1796
1797
1798MakeBootConfFile() {
1799    local options i ooo
1800    options=""
1801    # Type of boot file (elilo or syslinux/isolinux)
1802    type=$1
1803    if [ "$type" = "elilo" ]; then
1804        sep="="
1805    else
1806        sep=" "
1807    fi
1808
1809    # Generic header for conf file
1810    if [ "$type" != "elilo" ] ; then
1811        echo -en "prompt 1\ndisplay message.txt\nF1 message.txt\nF2 boot1.txt\nF3 boot2.txt\nF4 pxe.txt\n"
1812    else
1813        echo -en "prompt\n"
1814    fi
1815
1816    # Compute which default option to boot from
1817    if [ "$CDRECOVERY" = "yes" ] ; then
1818        echo -en "default${sep}RESTORE\n"
1819    # In case it's mondoarchive
1820    elif [ _"$MONDO_SHARE" != _"" ]; then
1821        if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
1822            echo -en "default${sep}iso\n"
1823        else
1824            echo -en "default${sep}${MINDI_DEFAULT_BOOT_OPTION}\n"
1825        fi
1826    else
1827        echo -en "default${sep}expert\n"
1828    fi
1829
1830    # Handle timeout
1831    if [ "$CDRECOVERY" != "yes" ] ; then
1832        echo -en "timeout${sep}${MINDI_BOOT_TIMEOUT}\n"
1833    else
1834        echo -en "timeout${sep}10000\n"
1835    fi
1836    echo -en "\n"
1837
1838    # prepare which labels will be generated
1839    if [ "$CDRECOVERY" = "yes" ] ; then
1840        options="RESTORE expert"
1841    else
1842        if [ _"$MONDO_SHARE" != _"" ]; then
1843            options="interactive expert compare iso nuke isonuke"
1844        else
1845            options="expert"
1846        fi
1847    fi
1848
1849    # Generate rest of conf file
1850    for i in $options ; do
1851        ooo=$i
1852        [ "$ooo" = "RESTORE" ] && ooo="RESTORE nuke"
1853        if [ "$type" = "elilo" ]; then
1854            outstr="image=/vmlinuz\n\tlabel=$i\n\tinitrd=/initrd.img\n\troot=/dev/ram0 append=\" rw ramdisk_size=$ramdisk_size $ooo $MINDI_ADDITIONAL_BOOT_PARAMS \"\n"
1855        else
1856            ps="/"
1857            if [ "$type" = "syslinux" ]; then
1858                ps=""
1859            fi
1860            if [ $KERNEL_IS_XEN = "no" ]; then
1861                outstr="label $i\n\tkernel ${ps}vmlinuz\n\tappend initrd=${ps}initrd.img root=/dev/ram0 rw ramdisk_size=$ramdisk_size ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS\n"
1862            else
1863                outstr="label $i\n\tkernel ${ps}mboot.c32\n\tappend ${ps}xen.gz --- ${ps}vmlinuz root=/dev/ram0 rw ramdisk_size=$ramdisk_size  ${ooo} $MINDI_ADDITIONAL_BOOT_PARAMS --- ${ps}initrd.img\n"
1864            fi
1865        fi
1866        echo -en "$outstr"
1867    done
1868    if [ -e "$MINDI_LIB/memtest.img" ] ; then
1869        if [ "$type" = "elilo" ]; then
1870            echo -en "image=/memtest.bin\n\tlabel=memtest\n"
1871            echo -en "image=/memdisk\n\tlabel=memdisk\nappend=\"initrd=memtest.img\"\n"
1872        else
1873            ps="/"
1874            if [ "$type" = "syslinux" ]; then
1875                ps=""
1876            fi
1877            echo -en "label memtest\n\tkernel ${ps}memtest.bin\n"
1878            echo -en "label memdisk\n\tkernel ${ps}memdisk\nappend initrd=${ps}memtest.img\n"
1879        fi
1880    fi
1881}
1882
1883
1884PrepareBootDiskImage_LILO() {
1885    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size liloconf
1886    imagesdir=$MINDI_CACHE
1887    kernelpath=$1
1888
1889    retval=0
1890
1891    old_pwd=`pwd`
1892    [ ! -e "$kernelpath" ] && Die "PBDI lilo - cannot find $kernelpath kernel"
1893    echo -en "Making "$BOOT_SIZE"KB boot disk..."
1894    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
1895    echo -en "..."
1896    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
1897    mountpoint=$MINDI_TMP/mountpoint.$$
1898    mkdir -p $mountpoint
1899    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
1900    LogFile "Creating vfat filesystem on $imagefile" 
1901    mkdosfs $imagefile >> $LOGFILE 2>> $LOGFILE
1902    mount -t vfat -o loop $imagefile $mountpoint || LogAll "ERROR: Cannot mount (PBDI)"
1903
1904    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
1905    mkdir -p $mountpoint/etc
1906    liloconf=$mountpoint/elilo.conf
1907
1908    MakeBootConfFile elilo > $liloconf
1909
1910    # Copy it so that CD-ROM menu entry is satisfied
1911    mountefi=0
1912    df -T | grep /boot/efi | grep -q vfat
1913    if [ $? -ne 0 ]; then
1914        mount /boot/efi
1915        if [ $? -ne 0 ]; then
1916            echo "You have to mount your EFI partition when using mindi"
1917            MindiExit -1
1918        fi
1919        mountefi=1
1920    fi
1921    el=`find /boot/efi -name elilo.efi`
1922    cp $el $mountpoint
1923    cp $liloconf $mountpoint
1924    if [ $mountefi -eq 1 ]; then
1925        umount /boot/efi 2>&1 > /dev/null
1926    fi
1927
1928    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint..."
1929    cp -f $MINDI_TMP/initrd.img $mountpoint 2>> $LOGFILE
1930    if [ "$?" -ne "0" ] ; then
1931        LogIt "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
1932        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
1933        LogIt "       Please unload some of your modules and try again. Or increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1934        rm -f $MINDI_TMP/mtpt.$$
1935        LogIt "ERROR: Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)"
1936        retval=$(($retval+1))
1937    fi
1938    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
1939
1940    mkdir -p $mountpoint/tmp
1941    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
1942        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
1943    fi
1944
1945    # copy the kernel across
1946    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
1947    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
1948    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
1949    cp -f $kernelpath $mountpoint/vmlinuz > /dev/null 2>> $LOGFILE
1950    if [ "$?" -ne "0" ] ; then
1951        LogFile "INFO: Files at mountpoint ($mountpoint) :"
1952        du -sk $mountpoint/* >> $LOGFILE
1953        LogFile "--- end of list of files ---"
1954        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
1955        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
1956        cd "$old_pwd"
1957        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1958        rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1959    #   losetup /dev/loop0 -d
1960        [ "$imagefile" != "" ] && rm -f $imagefile
1961        LogIt "ERROR: Sorry, your kernel is too big for your image"
1962        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
1963        return 0
1964    fi
1965    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
1966    LogFile "INFO: Free space left on image = $free_space KB"
1967    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
1968    # make it bootable
1969    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
1970    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
1971    if [ "$KERN_DISK_MADE" ] ; then
1972        LogFile "INFO: Not running LILO. It's not that kind of disk."
1973    fi
1974
1975    cp `dirname $kernelpath`/*.efi $mountpoint 2>> $LOGFILE
1976    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
1977    echo -en "..."
1978    rmdir $mountpoint || LogIt "ERROR: Cannot rmdir (PBDI)"
1979    if [ "$retval" -eq "0" ] ; then
1980        echo -en "...$DONE\n"
1981        if [ "$KERN_DISK_MADE" ] ; then
1982            LogIt "INFO: $BOOT_SIZE KB boot disks were created OK\n"
1983        fi
1984    else
1985        echo -en "...failed\n"
1986        LogIt "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
1987        [ "$imagefile" != "" ] && rm -f $imagefile
1988    fi
1989    [ "$retval" -ne "0" ] && LogIt "WARNING: PrepareBootDiskImage() is returning nonzero"
1990    return $retval
1991}
1992
1993
1994PrepareBootDiskImage_ISOLINUX() {
1995    local imagesdir dev imagefile mountpoint fname i kernelpath cfg_file testpath options retval outstr old_pwd ooo max_kernel_size bootimage retval
1996    imagesdir=$MINDI_CACHE
1997    kernelpath=$1
1998    do_boot_root_thingy=""
1999    retval=0
2000
2001    old_pwd=`pwd`
2002    [ ! -e "$kernelpath" ] && Die "PBDI isolinux - cannot find $kernelpath kernel"
2003    echo -en "Making "$BOOT_SIZE"KB boot disk..."
2004    TurnTgzIntoRdz $MINDI_LIB/rootfs $MINDI_TMP/initrd.img `du -sk $kernelpath | cut -f1` || Die "Could not turn rootfs into initrd.img; are you SURE your kernel supports loopfs?"
2005    echo -en "..."
2006    imagefile=$MINDI_TMP/mindi-bootroot.$BOOT_SIZE.img
2007    mountpoint=$MINDI_TMP/mountpoint.$$
2008    mkdir -p $mountpoint
2009    dd if=/dev/zero of=$imagefile bs=1k count=$BOOT_SIZE &> /dev/null || Die "Cannot dd blank file"
2010    LogFile "INFO: Creating vfat filesystem on $imagefile"
2011    mkfs.vfat $imagefile >> $LOGFILE 2>> $LOGFILE
2012    # syslinux should be run on a  local file (doen't work through NFS Cf: #297)
2013    syslinux $imagefile >> $LOGFILE 2>> $LOGFILE
2014
2015    # Only move it now to its final destination and use it now
2016    mv $imagefile $imagesdir
2017    imagefile=$imagesdir/mindi-bootroot.$BOOT_SIZE.img
2018
2019    mount -t vfat -o loop $imagefile $mountpoint || LogIt "ERROR: Cannot mount (PBDI)"
2020
2021    # copy Mindi's skeleton fs & lilo/syslinux/whatever stuff into it
2022    MakeMessageFile $mountpoint | cut -c1-80 > $mountpoint/message.txt
2023    MakeBootConfFile isolinux > $mountpoint/syslinux.cfg
2024    LogFile "INFO: Copying $MINDI_TMP/initrd.img to $mountpoint/initrd.img..."
2025    cp -f $MINDI_TMP/initrd.img $mountpoint/initrd.img 2>> $LOGFILE
2026    if [ "$?" -ne "0" ] ; then
2027        LogAll "ERROR: Failed to copy $MINDI_TMP/initrd.img to $mountpoint"
2028        cat $MINDI_TMP/mtpt.$$ >> $LOGFILE
2029        LogAll "       Please unload some of your modules and try again."
2030        rm -f $MINDI_TMP/mtpt.$$
2031        LogAll "       Cannot incorporate initrd.img in bootdisk (kernel / modules too big?)."
2032        LogAll "       Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2033        retval=$(($retval+1))
2034    fi
2035
2036    mkdir -p $mountpoint/tmp
2037    if [ -f "$MINDI_TMP/mondo-restore.cfg" ]; then
2038        cp -f $MINDI_TMP/mondo-restore.cfg $mountpoint/tmp
2039    fi
2040
2041    # copy the kernel across
2042    [ "$mountpoint" != "" ] && rm -Rf $mountpoint/lost+found
2043    dd if=/dev/zero of=$mountpoint/zero bs=1k count=16 &> /dev/null
2044    free_space=`df -k -P $mountpoint | tail -n1 | tr -s ' ' '\t' | cut -f4`
2045         
2046    retval=0
2047    cp -f $kernelpath $mountpoint/vmlinuz &> /dev/null
2048    retval=$?
2049    if [ $KERNEL_IS_XEN = "yes" ]; then
2050        cp -f $xenkernelpath $mountpoint/xenkernel &> /dev/null
2051        let retval+=$?
2052    fi
2053 
2054    if [ "$retval" -ne "0" ] ; then
2055        LogFile "INFO: Files at mountpoint ($mountpoint) :"
2056        du -sk $mountpoint/* >> $LOGFILE
2057        LogFile "--- end of list of files ---"
2058        echo -en "Kernel size = `du -sk $kernelpath | cut -f1` K\nRamdisk free = $free_space K\n" >> $LOGFILE
2059        [ "$mountpoint" != "" ] && rm -f $mountpoint/vmlinuz
2060        cd "$old_pwd"
2061        umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2062        rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2063
2064        LogIt "ERROR: Sorry, your kernel is too big for your image"
2065        Die "Try to increase EXTRA_SPACE and BOOT_SIZE in $MINDI_CONFIG"
2066    fi
2067    max_kernel_size=$(($free_space+`du -sk $kernelpath | cut -f1`))
2068    LogFile "INFO: Free space left on image = $free_space KB"
2069    LogFile "INFO: Max kernel size on $BOOT_SIZE KB image (est'd) = $max_kernel_size K"
2070
2071    # make it bootable
2072    [ "$mountpoint" != "" ] && rm -f $mountpoint/zero
2073    mkdir -p $mountpoint/etc
2074    [ -e "$MINDI_LIB/memdisk" ] && cp -f $MINDI_LIB/memdisk $mountpoint 2>> $LOGFILE
2075    umount $mountpoint || Die "Cannot unmount mountpoint ($mountpoint)"
2076    echo -en "..."
2077    rmdir $mountpoint || LogAll "ERROR: Cannot rmdir (PBDI)"
2078
2079    if [ "$retval" -eq "0" ] ; then
2080        echo -en "...$DONE\n"
2081        if [ "$KERN_DISK_MADE" ] ; then
2082            [ "$imagefile" != "" ] && rm -f $imagefile
2083            LogAll "INFO: $BOOT_SIZE KB boot disks were created OK\n"
2084        fi
2085    else
2086        echo -en "...failed\n"
2087        LogAll "WARNING: $BOOT_SIZE""KB boot disk was NOT created\n"
2088        [ "$imagefile" != "" ] && rm -f $imagefile
2089    fi
2090    [ "$retval" -ne "0" ] && LogAll "ERROR: PrepareBootDiskImage() is returning nonzero"
2091    return $retval
2092}
2093
2094
2095ParseModprobeForIncludes() {
2096local MODPROBE_CONF mpincfile includes include
2097
2098MODPROBE_CONF=/etc/modprobe.conf
2099mpincfile=$1
2100touch $mpincfile
2101if [ -a $MODPROBE_CONF ]; then
2102    includes=$($AWK '/^[ \t]*include[ \t]+/ {if(NF>=2){print $2}}' $MODPROBE_CONF|sort -u)
2103    if [ -n "$includes" ]; then
2104        for include in $includes
2105        do
2106            if [ -a "$include" ]; then
2107                echo $include >> $mpincfile
2108            fi
2109        done
2110    fi
2111fi
2112}
2113
2114
2115PrepareDataDiskImages() {
2116    local needlist bigdir diskdir imagesdir res i j k old_pwd lines lfiles includefile
2117
2118    imagesdir=$MINDI_CACHE
2119    rm -f $imagesdir/mindi.iso
2120    needlist=$MINDI_TMP/what-we-need.txt
2121    bigdir=$MINDI_TMP/bigdir
2122    mkdir -p $bigdir/usr/bin
2123    mkdir -p $bigdir/usr/sbin
2124    includefile=$MINDI_TMP/$$.includefile.txt
2125
2126    # Check whether /lib64 or /lib is a link and if so explicitly create one in rootfs
2127    if [ -h "/lib64" ]; then
2128        mkdir -p lib || LogIt "ERROR: Unable to create lib in $mountpoint."
2129        if [ ! -h lib64 ]; then
2130            ln -s lib lib64 || LogIt "ERROR: /lib64 is a symbolic link, but I couldn't create it in $mountpoint."
2131        fi
2132    fi
2133    if [ -h "/lib" ]; then
2134        mkdir -p usr/lib || LogIt "ERROR: Unable to create usr/lib in $mountpoint."
2135        mv lib/* usr/lib 2> /dev/null
2136        if [ -d "lib" ]; then
2137            rmdir lib
2138        fi
2139    fi
2140    # Check whether /sbin and /bin are a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2141    if [ -h "/sbin" ]; then
2142        mkdir -p usr/sbin || LogIt "ERROR: Unable to create usr/sbin in $mountpoint."
2143        mv sbin/* usr/sbin 2> /dev/null
2144        if [ -d "sbin" ]; then
2145            rmdir sbin
2146        fi
2147    fi
2148    if [ -h "/bin" ]; then
2149        mkdir -p usr/bin || LogIt "ERROR: Unable to create usr/bin in $mountpoint."
2150        mv bin/* usr/bin 2> /dev/null
2151        if [ -d "bin" ]; then
2152            rmdir bin
2153        fi
2154    fi
2155
2156    lfiles=`ls $DEPLIST_DIR/* | grep -v /minimal`
2157    if [ -e "$DEPLIST_FILE" ]; then
2158        lfiles="$DEPLIST_FILE $lfiles"
2159    fi
2160    lines=`grep -vx " *#.*" $lfiles | grep -vx "" | wc -l`
2161    ParseModprobeForIncludes $includefile
2162    lines=$(($lines+`cat $includefile | wc -l`))
2163    cat $lfiles $includefile | GenerateGiantDependencyList $needlist $lines
2164    res=$?
2165    rm -f $includefile
2166    if [ "$YOUR_KERNEL_SUCKS" ]; then
2167        pwd=`pwd`
2168        cd "$MINDI_TMP"
2169        for i in `ListKernelModulePaths | HackPathsToFailsafe` ; do
2170            tar cf - ./$i 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || Die "PDDI can't copy $i->$bigdir" $MINDI_TMP/$$.log
2171        done
2172        for i in $EXTRA_MODS ; do
2173            j=`find lib/modules/$FAILSAFE_KVER -name $i.*o.gz 2> /dev/null`
2174            [ ! "$j" ] && LogFile "WARNING: cannot find failsafe module $i.o.gz"
2175            for k in $j ; do
2176                tar cf - $k 2>> $MINDI_TMP/$$.log | (cd "$bigdir" ; tar xf -) || LogIt "ERROR: module $k extraction issue" $MINDI_TMP/$$.log
2177                LogFile "INFO: Added failsafe module $k to ramdisk"
2178            done
2179        done
2180        cd "$pwd"
2181    else
2182        ListKernelModulePaths >> $needlist
2183    fi
2184    if [ "$res" -ne "0" ] ; then
2185        Die "You have $res files present in dependency list\nbut absent from filesystem."
2186    fi
2187    mkdir -p $bigdir/tmp
2188    if [ _"$MONDO_SHARE" != _"" ]; then
2189        MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
2190        cp -f $MINDI_TMP/mondo-restore.cfg $bigdir/tmp &> /dev/null
2191    fi
2192
2193    # Needs to be done after the MRCFG creation
2194    FindAndAddUserKeyboardMappingFile
2195
2196    [ -d "/mnt/.boot.d" ] && echo "GENTOO" > $bigdir/tmp/DUMBASS-GENTOO
2197    DropOptimizedLibraries $needlist $bigdir
2198    echo -en "Assembling dependency files"
2199
2200    CopyDependenciesToDirectory < $needlist $bigdir `wc -l $needlist`
2201
2202    # also copy io.sys and msdos.sys, if we can find them
2203    for i in `mount | cut -d' ' -f3` ; do
2204        for j in io.sys msdos.sys ; do
2205            [ -e "$i/$j" ] && cp -f $i/$j $bigdir 2>> $LOGFILE
2206        done
2207    done
2208
2209    # master boot record, too
2210    i=`cat $MINDI_TMP/BOOTLOADER.DEVICE 2> /dev/null`
2211    if [ "$i" ] ; then
2212        LogAll "INFO: Backing up $i's MBR"
2213        dd if=$i of=$bigdir/BOOTLOADER.MBR bs=446 count=1 >> $LOGFILE 2>> $LOGFILE
2214        sleep 1
2215        sync
2216        j=$i
2217        [ -h "$j" ] && j=`readlink -f $j`
2218        LogAll "INFO: Creating /dev/boot_device ($j)"
2219        mkdir -p $bigdir/dev
2220        cp -pRdf $j $bigdir/dev/boot_device 2>> $LOGFILE || Die "Unable to create /dev/boot_device on ramdisk"
2221    fi
2222
2223    old_pwd=`pwd`
2224    cd "$bigdir"
2225
2226    # Get terminfo content
2227    ti="usr/share/terminfo/l"
2228    if [ -d /$ti ]; then
2229        mkdir -p $ti
2230        cp -Rdf /$ti/* $ti 2>> $LOGFILE || LogAll "ERROR: issue copying terminfo"
2231    fi
2232    if [ -e "$MONDO_SHARE/restore-scripts" ]; then
2233        cp -Rdf $MONDO_SHARE/restore-scripts/* . 2>> $LOGFILE
2234        [ "$?" -ne "0" ] && [ _"$MONDO_SHARE" != _"" ] && Die "Cannot find/install $MONDO_SHARE/restore-scripts"
2235    fi
2236    if [ -d "/lib/dev-state" ]; then 
2237        tar cf - -C / ./lib/dev-state 2>> $MINDI_TMP/$$.log | tar xf - || LogAll "ERROR: Unable to handle /lib/dev-state" $MINDI_TMP/$$.log
2238    fi
2239    cd "$old_pwd"
2240    echo -e "$DONE"
2241    TOTAL_BIGDIR_SIZE=`du -sk $bigdir | cut -f1`
2242    MakeMountlist $MINDI_TMP/mountlist.txt
2243    CheckMountlist $MINDI_TMP/mountlist.txt
2244    mkdir -p $bigdir/tmp
2245    cp -f $MINDI_TMP/mountlist.txt $bigdir/tmp/mountlist.txt 2>> $LOGFILE || Die "Cannot copy mountlist.txt from $MINDI_TMP to data disk"
2246    if [ _"$MONDO_SHARE" != _"" ]; then
2247        cp -f $bigdir/tmp/mountlist.txt $MINDI_TMP/. 2>> $LOGFILE
2248    fi
2249    if [ $LVM != "false" ]; then
2250        $MINDI_LIB/analyze-my-lvm > $bigdir/tmp/i-want-my-lvm
2251        if [ "$?" -ne "0" ]; then
2252            LVM="false"
2253            rm -f $bigdir/tmp/i-want-my-lvm
2254        else
2255            LogFile "Your i-want-my-lvm file content is:"
2256            LogFile "-----------------------------------"
2257            cat  $bigdir/tmp/i-want-my-lvm >> $LOGFILE
2258            LogFile "-----------------------------------"
2259        fi
2260    fi
2261    LogFile "Your mountlist.txt file content is:"
2262    LogFile "-----------------------------------"
2263    cat $bigdir/tmp/mountlist.txt >> $LOGFILE
2264    LogFile "-----------------------------------"
2265
2266    echo -en "$FILES_IN_FILELIST" > $bigdir/FILES-IN-FILELIST 2>> $LOGFILE
2267    echo -en "$LAST_FILELIST_NUMBER" > $bigdir/LAST-FILELIST-NUMBER 2>> $LOGFILE
2268    if [ _"$MONDO_SHARE" != _"" ]; then
2269        for q in filelist.full.gz biggielist.txt ; do
2270            [ ! -e "$MINDI_TMP/$q" ] && Die "Cannot find $MINDI_TMP/$q"
2271            cp -pRdf $MINDI_TMP/$q $bigdir/tmp 2>> $LOGFILE
2272        done
2273    fi
2274
2275    echo -en "Tarring and zipping the data content..."
2276    size_of_all_tools=`du -sk $bigdir | cut -f1`
2277    (cd "$bigdir" ; tar -b 4096 -cf - . 2>> $MINDI_TMP/$$.log | gzip -9 > $imagesdir/all.tar.gz || LogAll "ERROR: Problem creating all.tar.gz" $MINDI_TMP/$$.log)
2278    LogFile "Size of the data content"
2279    LogFile "------------------------"
2280    du -sk $imagesdir/*gz >> $LOGFILE
2281    LogFile "------------------------"
2282    echo -e "$DONE"
2283
2284    FRIENDLY_OUTSTRING="Boot and data disk images were created."
2285    rm -rf $bigdir
2286    rm -f $needlist
2287}
2288
2289
2290ProcessLDD() {
2291    local incoming f d nd bd bnd
2292    read incoming
2293    while [ "$incoming" != "" ]; do
2294        # We take the full path name of the dyn. lib. we want
2295        incoming=`echo "$incoming" | $AWK '{if (match($1,/\//)) {print $1} else {if (match($3,/\//)) print $3} fi}'`
2296        for f in $incoming ; do
2297            # echo modified file name if one of the parent dir is a link
2298            # by replacing the original dirname by the destination of the link
2299            d="`dirname $f`"
2300            found="false"
2301            while [ "$d" != "/" ]; do
2302                if [ -h "$d" ]; then
2303                    nd=`readlink -f $d`
2304                    bd=`basename $d`
2305                    bnd=`basename $nd`
2306                    f=`echo $f | sed "s~/$bd/~/$bnd/~"`
2307                    echo $d
2308                fi
2309                d="`dirname $d`"
2310            done
2311
2312            echo "$f"
2313            echo "`ReadAllLink $f`"
2314        done
2315        read incoming
2316    done
2317}
2318
2319
2320Prompt() {
2321    echo -en "$1"
2322    read line
2323}
2324
2325
2326ReadLine() {
2327    local i incoming
2328    read incoming
2329    i=0
2330    while [ "$i" -le "32" ] && [ "$incoming" = "" ] ; do
2331        i=$(($i+1))
2332        read incoming
2333    done
2334    echo "$incoming"
2335}
2336
2337
2338SizeOfPartition() {
2339    local devpath drive res stub
2340    device=$1
2341    if [ "`echo "$device" | grep -E "^/dev/"`" = "" ] ; then
2342        Die "Cannot find $device's size - is your /etc/fstab sane?"
2343    fi
2344    if [ "`echo "$device" | grep -F "/dev/md"`" != "" ] ; then
2345        res=`SizeOfRaidPartition $device`
2346        [ "$res" = "" ] && Die "Cannot find $device's size - is your /etc/raidtab sane?"
2347        echo "$res"
2348        return 0
2349    fi
2350    # patch from Bill <bill@iwizard.biz> - 2003/08/25
2351    res=`$FDISK -s $device 2>> $LOGFILE`
2352    # end patch
2353    # take only the first in case of multiple mount (cifs, nfs, ...)
2354    [ "$res" = "" ] && res=`df -k -P -x supermount | tr -s '\t' ' ' | grep -F "$device " | cut -d' ' -f2 | head -1`
2355    [ "$res" = "" ] && res="-1"
2356    echo $res
2357    return 0
2358}
2359
2360
2361SizeOfRaidPartition() {
2362    local real_dev smallest_size silly tmp
2363
2364    silly=999999999
2365    smallest_size=$silly
2366
2367    for real_dev in `GetRaidDevMembers $1` ; do
2368        tmp=`SizeOfPartition $real_dev`
2369        [ "$tmp" -lt "$smallest_size" ] && smallest_size=$tmp
2370    done
2371
2372    if [ "$smallest_size" = "$silly" ] ; then
2373        echo "-1"
2374        return 1
2375    else
2376        echo "$smallest_size"
2377        return 0
2378    fi
2379}
2380
2381
2382StripExecutable()
2383{
2384    local tmpfile
2385
2386    tmpfile=$MINDI_TMP/stripped.$$.dat
2387    [ -d "$1" ] || [ -h "$1" ] && return
2388    cp -f $1 $tmpfile 2>> $LOGFILE
2389    strip $tmpfile 2> /dev/null
2390    if [ "$?" -eq "0" ] ; then
2391        cp -f $tmpfile $1 2>> $LOGFILE
2392        LogFile "INFO: Stripped binary $2"
2393    fi
2394    rm -f $tmpfile
2395}
2396
2397KernelVer() {
2398        local fkern_ver fname
2399
2400        fname=$1
2401        file $fname | grep -q gzip
2402        if [ "$?" -eq "0" ] ; then
2403            # Used by ia64
2404            fkern_ver=`gzip -cd $fname | strings 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2405        else
2406            fkern_ver=`strings $fname 2> /dev/null | grep -E "[2-9]+\.[0-9]+\.[0-9]+[^\@]*@"`
2407        fi
2408        echo "$fkern_ver"
2409}
2410
2411
2412# WARNING: This function should just echo the final result !!!
2413#
2414TryToFindKernelPath() {
2415    local fname fkern_ver we_want_version possible_kernels noof_kernels possible_xenkernels noof_xenkernels kp kdate duff_kernels output root
2416
2417    we_want_version=$KERVERRUN
2418    possible_kernels=""
2419    duff_kernels=""
2420    output=""
2421   
2422    if [ "$ARCH" = "ia64" ] ; then
2423       root="/boot/efi/efi"
2424    else
2425       root="/"
2426    fi
2427    # See if we're booted from a Xen kernel
2428    # From http://wiki.xensource.com/xenwiki/XenCommonProblems#head-26434581604cc8357d9762aaaf040e8d87b37752
2429    if [ -f /proc/xen/capabilities ]; then
2430        # It's a Xen kernel
2431        KERNEL_IS_XEN="yes"
2432        LogFile "INFO: It's a Xen kernel..."
2433    fi
2434
2435    for fname in `find $root -maxdepth 2 -type f | grep -Ei 'lin|kern|xen' | grep -Ev '^/proc/|^/net/|^/mnt|^/lib|^/lib64|^/bin|^/sbin|^/usr|^/tmp'` ; do
2436        [ ! -e "$fname" ] && continue
2437        [ "$fname" = "/boot/vmlinuz.shipped" ] && [ -f "/boot/vmlinuz" ] && continue; # ignore SuSE's extra kernel
2438        fkern_ver=`KernelVer $fname`
2439        [ "$fkern_ver" = "" ] && continue
2440        [ "`echo "$fkern_ver" |grep -F "$we_want_version "`" = "" ] && continue
2441        [ -f "$fname" ] || continue
2442        [ -h "$fname" ] && continue
2443        kdate=`uname -v | $AWK '{for(i=1;i<NF;i++){if(index($i,":")){print $i;};};}' | $AWK '{print $NF;}'`
2444        file $fname | grep -q gzip
2445        if [ "$?" -eq "0" ] ; then
2446            # Used by ia64
2447            if [ "`gzip -cd $fname | strings 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2448                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting? Naughty but I'll allow it..."
2449                duff_kernels="$fname $duff_kernels"
2450            else
2451                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2452                possible_kernels="$fname $possible_kernels"
2453            fi
2454        else
2455            if [ "`strings $fname 2> /dev/null | grep -F "$kdate"`" = "" ] ; then
2456                LogFile "Have you recompiled your kernel \"$fname\" w/o rebooting?\n Naughty but I'll allow it..."
2457                duff_kernels="$fname $duff_kernels"
2458            else
2459                [ "`echo "$fname" | grep -F "vmlinux"`" ] && continue
2460                possible_kernels="$fname $possible_kernels"
2461            fi
2462        fi
2463    done
2464    if [ ! "$possible_kernels" ] && uname -a | grep Knoppix > /dev/null ; then
2465        possible_kernels=`find /boot/vmlinuz-[23].* | tail -n1`
2466    fi
2467    if [ ! "$possible_kernels" ] ; then
2468        LogAll "INFO: No kernel matches exactly. Are there any duff kernels?"
2469        possible_kernels="$duff_kernels"
2470        if [ ! "$possible_kernels" ] ; then
2471            LogAll "INFO: Sorry, no duff kernels either"
2472        else
2473            LogAll "INFO: I bet you're running Debian or Gentoo, aren't you?"
2474            LogAll "INFO: Your kernel doesn't have a sane builddate. Oh well..."
2475        fi
2476    fi
2477    if [ $KERNEL_IS_XEN = "yes" ]; then
2478        possible_xenkernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -i "xen" | sort -u | tr '\n' ' '`
2479        noof_xenkernels=`CountItemsIn "$possible_xenkernels"`
2480    fi
2481    possible_kernels=`echo "$possible_kernels" | tr -s ' ' '\n' | grep -vi "xen" | sort -u | tr '\n' ' '`
2482    noof_kernels=`CountItemsIn "$possible_kernels"`
2483    if [ "$noof_kernels" -eq "0" ] ; then
2484        LogAll "Could not find your kernel."
2485        if [ -e "/boot/vmlinuz" ] ; then
2486            LogAll "INFO: Using /boot/vmlinuz as a last resort."
2487            output=/boot/vmlinuz
2488        else
2489            output=""
2490        fi
2491    elif [ "$noof_kernels" -eq "1" ] ; then
2492        kp=`echo "$possible_kernels" | sed s/' '//`
2493        LogFile "INFO: Your kernel is $kp (v$KERVERRUN)"
2494        output="$kp"
2495    else
2496        for i in $possible_kernels ; do
2497            if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2498                LogAll "INFO: OK, I used my initiative and found that "
2499                LogAll "INFO: $i is probably your kernel. "
2500                output="$i"
2501                break
2502            fi
2503        done
2504        if [ ! -n "$output" ]; then
2505            if [ "`echo " $possible_kernels " | grep -F "/boot/vmlinuz " &> /dev/null`" ]; then
2506                output=/boot/vmlinuz
2507                LogFile "INFO: Schlomo, this one's for you."
2508            else
2509                LogFile "INFO: Two or more possible kernels found. You may specify any one of them and the "
2510                LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2511                LogFile "INFO: $possible_kernels"
2512                output=""
2513            fi
2514        fi
2515    fi
2516    if [ $KERNEL_IS_XEN = "yes" ]; then
2517        if [ "$noof_xenkernels" -eq "0" ]; then
2518            xenkernelpath=""
2519        elif [ "$noof_xenkernels" -eq "1" ]; then
2520            xenkernelpath=`echo "$possible_xenkernels" | sed s/' '//`
2521            LogFile "INFO: Your Xen kernel is $xenkernelpath (v$KERVERRUN)"
2522        else
2523            for i in $possible_xenkernels ; do
2524                if [ "`echo $i | grep "$KERVERRUN"`" ]; then
2525                    LogFile "INFO: OK, I used my initiative and found that "
2526                    LogFile "INFO: $i is probably your Xen kernel. "
2527                    xenkernelpath="$i"
2528                    break
2529                fi
2530            done
2531            if [ ! -n "$xenkernelpath" ]; then
2532                new_possible_xenkernels=`echo "$possible_xenkernels" | tr -s ' ' '\n' | grep -E "^/boot" | sort -u | tr '\n' ' '`
2533                if [ ! -n "$new_possible_xenkernels" ]; then
2534                    xenkernelpath=`echo $new_possible_xenkernels | tr -s ' ' '\n' | head -1`
2535                    LogFile "INFO: Using $xenkernelpath"
2536                else
2537                    LogFile "INFO: Two or more possible Xen kernels found. You may specify any one of them and the "
2538                    LogFile "INFO: boot disks will still work, probably. If one does not work, try another."
2539                    LogFile "INFO: $possible_xenkernels"
2540                    output=""
2541                    xenkernelpath=`echo $possible_xenkernels | tr -s ' ' '\n' | head -1`
2542                    LogFile "INFO: Using $xenkernelpath"
2543                fi
2544            fi
2545        fi
2546        if [[ -z "$xenkernelpath" || ! -f "$xenkernelpath" ]]; then
2547            Die "Cannot find Xen kernel $xenkernelpath, aborting"
2548        fi
2549    fi
2550    LogAll "TryToFindKernelPath found $output"
2551    echo "$output"
2552}
2553
2554
2555TurnTgzIntoRdz() {
2556    local tgz_dir_fname rdz_fname tempfile mountpoint old_pwd nodes kernelsize maxsize res currsize not_copied j k s w needed_modules_path d thelink
2557
2558    tgz_dir_fname=$1
2559    rdz_fname=$2
2560    kernelsize=$3
2561    maxsize=$(($BOOT_SIZE-$kernelsize))
2562    maxsize=$(($maxsize*2)); # to allow for compression of 50%
2563    tempfile=$MINDI_TMP/temp.rd
2564    mountpoint=$MINDI_TMP/mnt1
2565    res=0
2566    echo -en "..."
2567    dd if=/dev/zero of=$tempfile bs=1k count=$ramdisk_size &> /dev/null || Die "Not enough room for temporary ramdisk (TurnTgzIntoRdz)"
2568    echo -en "..."
2569    LogFile "INFO: Creating ext2 filesystem on $tempfile"
2570    mke2fs -b 1024 -m 1 -i 2048 -F $tempfile >> $LOGFILE 2>> $LOGFILE || Die "Unable to create an ext2 file system on $tempfile"
2571    echo -en "..."
2572    mkdir -p $mountpoint
2573    mount -t ext2 -o loop $tempfile $mountpoint || Die "Cannot loopmount $tempfile to $mountpoint! The reason may be missing support for loopfs or ext2 (or both) in the running kernel."
2574    echo -en "..."
2575    old_pwd=`pwd`
2576    cd "$mountpoint"
2577
2578    # Check whether /lib64 or /lib or /sbin or /bin is a link and if so explicitly create one in rootfs (Fedora 17 crazyness)
2579    for d in bin sbin lib lib64; do
2580        if [ -h "/$d" ]; then
2581            thelink=`readlink /$d`
2582            mkdir -p $mountpoint/$thelink || LogIt "ERROR: Unable to create $thelink in $mountpoint."
2583            mv $mountpoint/$d/* $mountpoint/$d/.??* $mountpoint/$thelink 2> /dev/null
2584            if [ -d "$mountpoint/$d" -a ! -h "$mountpoint/$d" ]; then
2585                rmdir $mountpoint/$d
2586            fi
2587            if [ ! -h $mountpoint/$d ]; then
2588                rm -f $mountpoint/$d 2> /dev/null
2589                (cd $mountpoint ; ln -s $thelink $d) || LogIt "ERROR: /$d is a symbolic link, but I couldn't create it in $mountpoint."
2590            fi
2591        fi
2592    done
2593
2594    LogFile "INFO: what is now in $mountpoint"
2595    ls -alR $mountpoint >> $LOGFILE
2596   
2597    # Check files before copying to discover configuration issues or McAfee preventing mindi reading these files
2598    # copy from rootfs into mountpoint
2599    for f in $tgz_dir_fname/*; do 
2600        if [ ! -r $f ]; then
2601            Die "ERROR: Unable to copy $f to the target dir. Check your installation or McAfee presence"
2602        else
2603            cp -Rdf $f . 2>&1 >> $LOGFILE
2604        fi
2605    done
2606    (cd etc ; ln -sf bashrc profile ; ln -sf bashrc shrc ; ln -sf ../proc/mounts mtab ; ln -sf ../sbin/init linuxrc)
2607    ln -sf sbin/init linuxrc
2608    tar -zxf symlinks.tgz || Die "Cannot untar symlinks.tgz"
2609
2610    cd dev || Die "Can't cd to dev"
2611    tar -zxf dev-entries.tgz || Die "Cannot untar dev-entries.tgz"
2612    rm -f dev-entries.tgz
2613    cd ..
2614
2615    for w in insmod.static insmod.static.old ; do
2616        s=`which $w 2> /dev/null`
2617        if [ -e "$s" ] ; then
2618            tar cf - -C / $s 2> /dev/null | tar xf -
2619        fi
2620    done
2621
2622    [ -e "/dev/.devfsd" ] && echo "/dev/.devfsd found" > tmp/USE-DEVFS
2623   
2624    # Copy of files mandatory for ssh to automate mount if sshfs is used
2625    mkdir -p $mountpoint/.ssh $mountpoint/tmp
2626    cp -a ~root/.ssh/* $mountpoint/.ssh 2> /dev/null
2627    cat > $mountpoint/tmp/myssh << EOF
2628ssh -o StrictHostKeyChecking=no $*
2629EOF
2630    chmod 755 $mountpoint/tmp/myssh
2631
2632    # Copy of files mandatory for ld.so
2633    cp -a /etc/ld.so.c* $mountpoint/etc
2634
2635    # Handle the case where busybox and mount are dynamically linked
2636    file $MINDI_LIB/rootfs/bin/busybox 2>&1 | grep -q "dynamically" 
2637    if [ $? -eq 0 ]; then
2638        # We want to use the real mount and all the supported variants (nfs, cifs, ...)
2639        rm -f bin/mount
2640    fi
2641
2642    # Copy of files from the minimal env needed as per the deplist.d/minimal.conf & udev.conf file (which includes all busybox deps)
2643    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2644    for f in `cat $DEPLIST_DIR/minimal.conf $DEPLIST_DIR/udev.conf | grep -vE " *#.*|^#" | sort -u` ; do
2645        if [ -d $f ]; then
2646            for g in `find $f`; do 
2647                echo $g >> $MINDI_TMP/minimal.lis
2648                LocateDeps $g  >> $MINDI_TMP/minimal2.lis
2649            done
2650        else 
2651            if [ -r $f ]; then
2652                echo $f >> $MINDI_TMP/minimal.lis
2653                LocateDeps $f >> $MINDI_TMP/minimal2.lis
2654            fi
2655        fi
2656    done
2657    for f in `cat $MINDI_TMP/minimal.lis` `sort -u $MINDI_TMP/minimal2.lis`; do
2658        ReadAllLink $f >> $MINDI_TMP/minimal.lis
2659    done
2660    # Initial / are trucated by tar
2661    finallist=""
2662    # Remove directories from the list, as tar will create them anyway
2663    # and it may hurt if /lib is in it as on Debian/Ubuntu
2664    # recent bash says that -d is true for a link to a dir !
2665    for f in `sort -u $MINDI_TMP/minimal.lis`; do
2666        if [ -e $f -a ! -d $f ] || [ -h $f -a ! -d $f ]; then
2667            finallist="$finallist $f"
2668        fi
2669    done
2670    tar cf - $finallist 2>> $MINDI_TMP/$$.log | tar xUf - || LogIt "WARNING: Problem in minimal analysis" $MINDI_TMP/$$.log
2671
2672    # To improve support for distribution scripts, we now prefer to use bash as the std shell. Also fixes #600
2673    ln -sf /bin/bash bin/sh
2674    LogIt "INFO: Using bash as default shell"
2675    rm -f $MINDI_TMP/minimal.lis $MINDI_TMP/minimal2.lis
2676
2677    # Avoids an issue on some distro (RHEL5)
2678    rm -f $mountpoint/etc/ld.so.conf.d/kernelcap*
2679
2680    mkdir -p $mountpoint/tmp
2681    # Management of udev (which includes modprobe in rules)
2682    ps auxww | grep -v grep | grep -qw udevd
2683    if [ $? -eq 0 ]; then
2684        echo "udev device manager found" > $mountpoint/tmp/USE-UDEV
2685        LogIt "INFO: udev device manager found"
2686        tar cf - -C / /etc/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /etc/udev analysis" $MINDI_TMP/$$.log
2687        # This avoids NIC remapping if on another machine at restore time on Debian/Ubuntu at least
2688        rm -f ./etc/udev/rules.d/[z]*[0-9][0-9][-_]persistent-net.rules
2689        # Do not do it if it's a link (Ubuntu 64 bits #503)
2690        if [ -e "/lib64/udev" ] && [ ! -h "/lib64" ] && [ ! -h "/lib64/udev" ]; then
2691            tar cf - -C / /lib64/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib64/udev analysis" $MINDI_TMP/$$.log
2692        fi
2693        if [ -e "/lib32/udev" ] && [ ! -h "/lib32" ] && [  ! -h "/lib32/udev" ]; then
2694            tar cf - -C / /lib32/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib32/udev analysis" $MINDI_TMP/$$.log
2695        fi
2696        if [ -e "/lib/udev" ] && [ ! -h "/lib" ] && [  ! -h "/lib/udev" ]; then
2697            tar cf - -C / /lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /lib/udev analysis" $MINDI_TMP/$$.log
2698        fi
2699        if [ -e "/usr/lib/udev" ] && [ ! -h "/usr/lib" ] && [  ! -h "/usr/lib/udev" ]; then
2700            tar cf - -C / /usr/lib/udev 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in /usr/lib/udev analysis" $MINDI_TMP/$$.log
2701        fi
2702        if [ -x /sbin/udevd ] || [ -x /usr/bin/udevd ] || [ -x /usr/lib/systemd/systemd-udevd ]; then
2703            lis2=`grep -Ev '^#' $DEPLIST_DIR/udev.conf`
2704            lis=""
2705            # Get only the files which exist in that list
2706            # and potentially their symlink structure
2707            for i in $lis2; do
2708                if [ -h $i ]; then
2709                    j=$i
2710                    while [ -h $j ]; do
2711                        lis="$lis $j"
2712                        j=`readlink -f $j`
2713                    done
2714                    lis="$lis $j"
2715                elif [ -f $i ]; then
2716                    lis="$lis $i"
2717                fi
2718            done
2719            # And their deps
2720            LocateDeps $lis > $MINDI_TMP/udev.lis
2721            for i in $lis; do
2722                if [ "`echo $i | cut -c1`" = "/" ]; then
2723                    j=`echo $i | cut -c2-`
2724                    [ "$j" != "" ] && rm -f $j
2725                fi
2726                echo "$i" >> $MINDI_TMP/udev.lis
2727            done
2728            tar cf - -C / $lis `sort -u $MINDI_TMP/udev.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in udev.lis analysis" $MINDI_TMP/$$.log
2729            rm -f $MINDI_TMP/udev.lis
2730        else
2731            LogAll "WARNING: udevd daemon not in standard place (/sbin or /usr/bin)"
2732            LogAll "         mindi will use static devices which may cause problems"
2733            rm -f $mountpoint/tmp/USE-UDEV
2734        fi
2735    fi
2736
2737    # Management of potential HW info (ProLiant only at the moment)
2738    rm -rf $MINDI_CACHE/bkphw
2739    mindi-bkphw $MINDI_CACHE $MINDI_CONF | tee -a $LOGFILE
2740    if [ -d $MINDI_CACHE/bkphw ]; then
2741        LogIt "INFO: Hardware Information found and saved ..."
2742        cp -rp $MINDI_CACHE/bkphw .
2743        if [ -f $MINDI_CACHE/tools.files ]; then
2744            lis=`grep -Ev '^#' $MINDI_CACHE/tools.files` 
2745            LocateDeps $lis > $MINDI_TMP/tools.lis
2746            tar cf - $lis `sort -u $MINDI_TMP/tools.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in tools.lis analysis" $MINDI_TMP/$$.log
2747        fi
2748        if [ -f $MINDI_CACHE/mindi-rsthw ]; then
2749            mv -f $MINDI_CACHE/mindi-rsthw .
2750            chmod 755 ./mindi-rsthw
2751        fi
2752        rm -f $MINDI_TMP/tools.lis $MINDI_CACHE/tools.files
2753    fi
2754
2755    # Management of perl scripts delivered needed at restore time
2756    mindi-get-perl-modules `cat $MINDI_CONF/perl-scripts` > $MINDI_TMP/perl.lis
2757    tar cf - `cat $MINDI_TMP/perl.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in perl scripts analysis" $MINDI_TMP/$$.log
2758
2759    for w in cdrom groovy-stuff ; do
2760        mkdir -p mnt/$w
2761    done
2762
2763    tar cf - -C / /dev/fd0*[1,2][4,7,8]* 2>> $MINDI_TMP/$$.log | tar xf -  || LogIt "ERROR: Problem in fd dev analysis" $MINDI_TMP/$$.log
2764
2765    cd "$old_pwd"
2766    echo -en "..."
2767    if [ "$YOUR_KERNEL_SUCKS" ] ; then
2768        cd "$MINDI_TMP"
2769        needed_modules_path=lib/modules/$FAILSAFE_KVER
2770    else
2771        cd /
2772        if [ "${kernelname}" != "" ]
2773        then
2774            needed_modules_path=lib/modules/${kernelname}
2775        else
2776            needed_modules_path=lib/modules/$KERVERRUN
2777        fi
2778    fi
2779
2780    needed_modules=""
2781    list_of_groovy_mods="$CDROM_MODS $FORCE_MODS"
2782
2783    if [ -e "$MINDI_TMP/NETFS-DEV" ] ; then
2784        # For PXE boot
2785        list_of_groovy_mods="$list_of_groovy_mods $NET_MODS"
2786    fi
2787    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
2788        list_of_groovy_mods="$list_of_groovy_mods $EXTRA_MODS"
2789    fi
2790    for i in $DENY_MODS; do
2791        LogFile "INFO: Removing $i from the list of modules to load"
2792        list_of_groovy_mods=`echo ${list_of_groovy_mods} | tr ' ' '\n' | grep -Ev "^${i}$" | tr '\n' ' '`
2793    done
2794
2795    [ -e "$needed_modules_path" ] || LogIt "WARNING: path $needed_modules_path does not exist.\n If you're not using a modular kernel then you're NUTS."
2796    for i in $list_of_groovy_mods ; do
2797        needed_modules="$needed_modules `FindSpecificModuleInPath $needed_modules_path $i`"
2798    done
2799
2800    for i in `echo $needed_modules  | tr ' ' '\n' | sort -u`; do
2801        [ -e "$i" ] && s=`du -sk $i | cut -f1` || s=""
2802        [ "$YOUR_KERNEL_SUCKS" ] && i=$MINDI_TMP/$i
2803        LogFile "INFO: Adding $i ($s KB) to the rootfs"
2804        tar cf - -C / $i 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy $i to $mountpoint" $MINDI_TMP/$$.log
2805        # Uncompress modules if not using udev and native modprobe
2806        if [ ! -f $mountpoint/tmp/USE-UDEV ]; then
2807            if [ "`echo "$i" | grep -F ".gz"`" ]; then
2808                LogFile "INFO: Uncompressing $i"
2809                gunzip -f $mountpoint/$i
2810            fi
2811        fi
2812        if [ -L $mountpoint/$i ] && [ `echo "$i" | grep "\.ko$"` ]; then
2813            echo "Replacing module symlink ($i) with actual file"
2814            rm -f $mountpoint/$i
2815            cp -Lf $i $mountpoint/$i
2816            ls -l $mountpoint/$i
2817        fi
2818    done
2819
2820    # Also copy modules.* in case of udev so that normal modprobe works
2821    tar cf - -C / /$needed_modules_path/modules.* 2>> $MINDI_TMP/$$.log | (cd "$mountpoint" ; tar xf -) || LogIt "ERROR: Unable to copy modules.* to $mountpoint" $MINDI_TMP/$$.log
2822
2823    # Copy FW in case some drivers needs it
2824    for d in "/lib" "/usr/lib"; do
2825        if [ -d "$d/firmware" -a ! -h $d ]; then
2826            cp -a "$d/firmware" "$mountpoint/$d"
2827        fi
2828    done
2829
2830    # Copy multipath dynamic libraries in case multipath is used (RHEL 6.4 and later)
2831    for d in "/lib" "/usr/lib" "/lib64" "/usr/lib64"; do
2832        if [ -d "$d/multipath" -a ! -h $d ]; then
2833            cp -a "$d/multipath" "$mountpoint/$d"
2834        fi
2835    done
2836
2837    # Copy an additional ProLiant tool for OBDR support
2838    if [ -f $MINDI_TMP/OBDR ]; then
2839        found=0
2840        if [ -x /usr/bin/hpsa_obdr_mode ]; then
2841            mkdir -p $mountpoint/usr/bin
2842            cp -a /usr/bin/hpsa_obdr_mode $mountpoint/usr/bin
2843            LogIt "INFO: Copying /usr/bin/hpsa_obdr_mode to ramdisk for improved Smart Array OBDR support"
2844            found=1
2845        fi
2846        if [ -x /usr/bin/sg_wr_mode ]; then
2847            mkdir -p $mountpoint/usr/bin
2848            lis="/usr/bin/sg_map /usr/bin/sg_inq /usr/bin/sg_reset /usr/bin/rev"
2849            LocateDeps $lis > $MINDI_TMP/obdr.lis
2850            (cd $mountpoint ; tar cf - $lis -C /  `sort -u $MINDI_TMP/obdr.lis` 2>> $MINDI_TMP/$$.log | tar xf - || LogIt "ERROR: Problem in obdr.lis analysis" $MINDI_TMP/$$.log)
2851            LogIt "INFO: Copying /usr/bin/sg_reset to ramdisk for improved SCSI OBDR support"
2852            found=1
2853        fi
2854        if [ $found -eq 0 ]; then
2855            LogAll "WARNING: You're using OBDR mode without having the /usr/bin/hpsa_obdr_mode nor the /usr/bin/sg_wr_mode tool"
2856            LogAll "         This may lead to a tape not going back to sequential mode after OBDR boot"
2857        fi
2858    fi
2859
2860    if [ ! -e "/sbin/devfsd" ] || [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] ; then
2861        LogFile "INFO: Deleting devfsd daemon from ramdisk"
2862        [ ! -e "/sbin/devfsd" ] && LogFile "      ...because /sbin/devfsd not found"
2863        [ "$kernelpath" = "$MINDI_LIB/vmlinuz" ] && LogFile "      ...because kernel is failsafe"
2864        rm -f $mountpoint/sbin/devfsd
2865    fi
2866    cd "$old_pwd"
2867    [ "$TAPEDEV" ] && echo -en "$TAPEDEV" > $mountpoint/tmp/TAPEDEV-LIVES-HERE
2868    if [ _"$MONDO_SHARE" != _"" ]; then
2869        MakeMondoConfigFile $mountpoint/tmp/mondo-restore.cfg
2870        cp -f $mountpoint/tmp/mondo-restore.cfg $MINDI_TMP 2>> $LOGFILE || Die "Cannot copy mondo-restore.cfg to ramdisk"
2871        cp -f $MINDI_TMP/mountlist.txt $mountpoint/tmp/ 2>> $LOGFILE || Die "Cannot copy mountlist to ramdisk"
2872        echo -en "$FILES_IN_FILELIST" > $mountpoint/tmp/FILES-IN-FILELIST
2873        echo -en "$LAST_FILELIST_NUMBER" > $mountpoint/tmp/LAST-FILELIST-NUMBER
2874        [ "$USE_LZO" = "yes" ] && echo -en "Pras 4 Pres 2004" >> $mountpoint/tmp/USING-LZO
2875        [ "$USE_GZIP" = "yes" ] && echo -en "YES" >> $mountpoint/tmp/USING-GZIP
2876        [ "$USE_COMP" = "yes" ] && echo -en "Compression, yep" >> $mountpoint/tmp/USING-COMP
2877        [ "$USE_STAR" = "yes" ] && echo -en "Using star. Hooray." >> $mountpoint/tmp/USING-STAR
2878    fi
2879    mkdir -p $mountpoint/proc
2880    LogFile "---------------------------"
2881    LogFile "Content of initial ramdisk:"
2882    LogFile "---------------------------"
2883    (cd "$mountpoint" ; ls -Rla ) >> $LOGFILE
2884    LogFile "---------------------------"
2885
2886    # Determine what filesystem to use for initrd image
2887    LogFile "INFO: Call GetInitrdFilesystemToUse() with parameter ${kernelpath} to get filesystem to use for initrd."
2888    gvFileSystem=`GetInitrdFilesystemToUse ${kernelpath}`
2889    [ -z  gvFileSystem ] && Die "GetFilesystemToUse() failed. Terminating."
2890    if [ "$gvFileSystem" = "ext2fs" ] || [ "$gvFileSystem" = "ext3fs" ] || [ "$gvFileSystem" = "ext4fs" ]; then
2891        # say what will be used
2892        LogFile "INFO: Creating an $gvFileSystem initrd image..."
2893        # kernel expects linuxrc in ext2 filesystem
2894        ( cd "$mountpoint" && ln -sf sbin/init linuxrc )
2895        # unmount loop filesystem and create image file using the standard approach
2896        umount $mountpoint || Die "Cannot unmount $tempfile"
2897        dd if=$tempfile bs=1k 2> /dev/null > ${rdz_fname}.tmp 2> /dev/null
2898        if [ "$gvFileSystem" = "ext4fs" ] && [ -x "/sbin/tune4fs" ]; then
2899            bs=`/sbin/tune4fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2900        else
2901            bs=`tune2fs -l ${rdz_fname}.tmp | grep -E '^Block size:' | cut -d: -f2 | sed 's/^ *//'`
2902        fi
2903        MINDI_ADDITIONAL_BOOT_PARAMS="$MINDI_ADDITIONAL_BOOT_PARAMS ramdisk_blocksize=$bs"
2904        gzip -c9 ${rdz_fname}.tmp > $rdz_fname
2905        rm -f ${rdz_fname}.tmp
2906        # log that we are done
2907        LogFile "      ...done."
2908    elif [ "$gvFileSystem" = "initramfs" ]; then
2909        # say what will be used
2910        LogFile "INFO: Creating a gzip'ed cpio (AKA initramfs) initrd image..."
2911        # make sure that cpio is there
2912        which cpio &> /dev/null; [ $? -eq 0 ] || Die "cpio not found. Please install package cpio and try again."
2913        # go into filesystem
2914        cd "$mountpoint"
2915        # kernel expects init in cpio filesystem
2916        ln -sf sbin/init init
2917        # create cpio image file and unmount loop filesystem
2918        find . -print | cpio -o -H newc | gzip -9 > $rdz_fname 2> /dev/null
2919        cd "$old_pwd"
2920        umount $mountpoint || Die "Cannot unmount $tempfile"
2921        # log that we are done
2922        LogFile "      ...done."
2923    else
2924        Die "Filesystem $gvFileSystem not supported for initrd image. Terminating."
2925    fi
2926
2927    if [ "$res" -eq "0" ] ; then
2928        echo -en "..."
2929    else
2930        echo -en "\rMade an rdz WITH ERRORS.           \n"
2931    fi
2932    return 0
2933}
2934
2935
2936##############################################################################
2937#----------------------------------- Main -----------------------------------#
2938##############################################################################
2939
2940# Now we can create what we need
2941mkdir -p $MINDI_TMP
2942
2943# Purge from potential old run
2944if [ _"$MINDI_CACHE" = _"" ]; then
2945    Die "MINDI_CACHE undefined"
2946fi
2947
2948# --nolog needs to be first, and is used in analyze-my-lvm
2949if [ "$1" = "--nolog" ] ; then
2950    shift
2951    LOGFILE=/dev/stderr
2952else
2953    > $LOGFILE
2954fi
2955if [ "$1" = "--printvar" ] ; then
2956    shift
2957    if [ _"$1" != _"" ] ; then
2958        set | grep -Ew "^$1" | cut -d= -f2
2959    fi
2960    exit 0
2961fi
2962
2963LogFile "mindi v$MINDI_VERSION"
2964LogFile "$ARCH architecture detected"
2965LogFile "mindi called with the following arguments:"
2966echo "$@">> $LOGFILE
2967LogFile "Start date : `date`"
2968LogFile "-----------------------------"
2969
2970[ -e "/sbin/mkdosfs" ] && [ ! -e "/sbin/mkfs.vfat" ] && LogAll "/sbin/mkfs.vfat is missing!"
2971
2972# Log some capital variables
2973[ "$MINDI_PREFIX" = "XXX" ] && Die "Mindi has not been installed correctly."
2974[ "$MINDI_CONF" = "YYY" ] && Die "Mindi has not been installed correctly."
2975LogFile "MONDO_SHARE = $MONDO_SHARE"
2976LogFile "MINDI_LIB = $MINDI_LIB"
2977LogFile "MINDI_SBIN = $MINDI_SBIN"
2978LogFile "MINDI_CONF = $MINDI_CONF"
2979if [ -f $MINDI_CONFIG ]; then
2980    LogFile "-----------------------------"
2981    LogFile " Mindi configuration file    "
2982    LogFile "-----------------------------"
2983    grep -Ev '^#' $MINDI_CONFIG >> $LOGFILE
2984    LogFile "-----------------------------"
2985fi
2986LogFile "In Mindi"
2987LogFile "--------"
2988LogFile "EXTRA_SPACE = $EXTRA_SPACE"
2989LogFile "BOOT_SIZE = $BOOT_SIZE"
2990LogFile "--------"
2991
2992trap AbortHere SIGTERM SIGHUP SIGQUIT SIGKILL SIGABRT SIGINT
2993
2994# Sanity checks
2995which which > /dev/null 2> /dev/null || Die "Please install 'which'."
2996which strings > /dev/null 2> /dev/null || Die "Please install binutils and libbinutils; you have no 'strings' executable."
2997which gawk > /dev/null 2> /dev/null || Die "Gawk is missing from your computer. Please install gawk. You may find the package on Debian's website. How did I know you're running Debian? Because only Debian would be stupid enough not to include gawk in your distribution."
2998which gawk > /dev/null 2> /dev/null && AWK=`which gawk 2>/dev/null` || AWK="`which awk 2>/dev/null`"
2999if which awk &> /dev/null ; then
3000    if ! which gawk &> /dev/null ; then
3001        LogIt "INFO: You have awk but not gawk.\nPlease note that mindi works fine with a _sane_ awk binary.\nIf your awk binary misbehaves then please contact your vendor\nor distribution's mailing list for technical support.\n"
3002    fi
3003fi
3004which mke2fs > /dev/null 2> /dev/null || Die "Please put mke2fs in system path"
3005[ ! -e "$FDISK" ] && Die "Cannot find $FDISK"
3006
3007[ "`echo $KERVERRUN | grep -E "2\.4\.[0-6]" | grep -vE "2\.4\.[0-9][0-9]"`" != "" ] &&  echo "WARNING! Your kernel may have buggy loopfs code. Consider upgrading to 2.4.7"
3008
3009# Update the PATH variable if incomplete
3010if [ -e "/sbin/mkfs" ] && ! which mkfs &> /dev/null ; then
3011    PATH=$PATH:/sbin:/usr/sbin
3012    export PATH
3013    LogFile "INFO: Your PATH did not include /sbin or /usr/sbin. I have fixed that, temporarily."
3014    LogFile "INFO: However, you may wish to ask your vendor to provide a permanent fix..."
3015    LogFile "INFO:  Or you might like to call 'su -' instead of 'su', for example."
3016fi
3017
3018# If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3019if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ] && [ "$kernelpath" = "FAILSAFE" ]; then
3020    source $MINDI_LIB/FindDistroFailsafe
3021    # Log kernel image
3022    LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3023else
3024    [ -f "$MINDI_LIB/vmlinuz" ] && FAILSAFE_KVER=`strings $MINDI_LIB/vmlinuz 2> /dev/null | grep -E "2\.[46]" | cut -d' ' -f1`
3025fi
3026
3027if ! which mkfs.vfat 1> /dev/null 2> /dev/null ; then
3028    Die "mkfs.vfat missing from your filesystem - please install your dosfstools RPM or DEB package. Perhaps your PATH environmental variable is broken, too?"
3029fi
3030
3031### TODO
3032### Fix as it's not mandatory on ia64
3033if [ "$ARCH" = "ia64" ] ; then
3034    if which elilo &> /dev/null ; then
3035        LILO_EXE=elilo
3036    else
3037        LILO_EXE=`which false 2> /dev/null`
3038    fi
3039else
3040    FindIsolinuxBinary
3041fi
3042trap "Aborted" SIGTERM
3043DONE="\r\t\t\t\t\t\t\t\tDone.         "
3044kernelpath=""
3045MONDO_ROOT=/var/cache/mondo
3046mkdir -p $MONDO_ROOT
3047
3048if [ -d "/proc/lvm" ]; then
3049    # LVM v1
3050    LVMCMD=""
3051    LVM="v1"
3052elif [ -d "/dev/mapper" ]; then
3053    # LVM v2
3054    LVMCMD="lvm"
3055    LVM="v2"
3056else
3057    LVM="false"
3058fi
3059
3060if [ -e "/proc/cmdline" ]; then
3061    CMDLINE="/proc/cmdline"
3062elif [ -e "/tmp/cmdline" ]; then
3063    CMDLINE="/tmp/cmdline"
3064else
3065    CMDLINE="/dev/null"
3066fi
3067
3068LogFile "INFO: LVM set to $LVM"
3069LogFile "----------"
3070LogFile "mount result:"
3071LogFile "-------------"
3072mount >> $LOGFILE
3073if [ -e /etc/raidtab ]; then
3074    LogFile "-------------"
3075    LogFile "/etc/raidtab content:"
3076    LogFile "-------------"
3077    cat /etc/raidtab >> $LOGFILE
3078else
3079    LogFile "No file /etc/raidtab"
3080fi
3081if [ -e /etc/mdadm.conf ]; then
3082    LogFile "-------------"
3083    LogFile "/etc/mdadm.conf content:"
3084    LogFile "-------------"
3085    cat /etc/mdadm.conf >> $LOGFILE
3086else
3087    LogFile "-------------"
3088    LogFile "No file /etc/mdadm.conf"
3089fi
3090LogFile "-------------"
3091LogFile "cat $CMDLINE"
3092LogFile "-------------"
3093cat $CMDLINE >> $LOGFILE
3094LogFile "-------------"
3095LogFile "cat /proc/swaps:"
3096LogFile "-------------"
3097cat /proc/swaps >> $LOGFILE
3098LogFile "-------------"
3099if [ -e /proc/mdstat ]; then
3100    LogFile "cat /proc/mdstat:"
3101    LogFile "-------------"
3102    cat /proc/mdstat >> $LOGFILE
3103else
3104    LogFile "No pseudo file /proc/mdstat"
3105fi
3106LogFile "-------------"
3107LogFile "cat /proc/partitions:"
3108LogFile "-------------"
3109cat /proc/partitions >> $LOGFILE
3110LogFile "-------------"
3111LogFile "cat /proc/filesystems:"
3112LogFile "-------------"
3113cat /proc/filesystems >> $LOGFILE
3114LogFile "-------------"
3115LogFile "lsmod result:"
3116LogFile "-------------"
3117lsmod >> $LOGFILE
3118MODULES="`cat /proc/modules | $AWK '{print $1}'`"
3119if [ -x /usr/sbin/esxcfg-module ]; then
3120    LogFile "-------------"
3121    LogFile "INFO: VMWare ESX server detected - Enabling dedicated support"
3122    LogFile "-------------"
3123    LogFile "VMWare modules"
3124    LogFile "-------------"
3125    /usr/sbin/esxcfg-module -l >> $LOGFILE
3126    MODULES="$MODULES `/usr/sbin/esxcfg-module -l | $AWK '{print $1}'`"
3127fi
3128LogFile "-------------" 
3129LogFile "FORCE_MODS:"
3130LogFile "-------------"
3131LogFile "$FORCE_MODS"
3132LogFile "-------------"
3133LogFile "DENY_MODS:"
3134LogFile "-------------"
3135LogFile "$DENY_MODS"
3136LogFile "-------------"
3137LogFile "df result:"
3138LogFile "----------"
3139df -aT >> $LOGFILE
3140LogFile "-------------"
3141LogFile "df -i result:"
3142LogFile "----------"
3143df -i >> $LOGFILE
3144LogFile "-------------"
3145if [ -r /boot/grub/menu.lst ]; then
3146    LogFile "-------------"
3147    LogFile "INFO: /boot/grub/menu.lst content"
3148    LogFile "-------------"
3149    cat /boot/grub/menu.lst >> $LOGFILE
3150    LogFile "-------------"
3151fi
3152if [ -r /boot/grub/grub.conf ]; then
3153    LogFile "-------------"
3154    LogFile "INFO: /boot/grub/grub.conf content"
3155    LogFile "-------------"
3156    cat /boot/grub/grub.conf >> $LOGFILE
3157    LogFile "-------------"
3158fi
3159if [ -r /boot/grub/grub.cfg ]; then
3160    LogFile "-------------"
3161    LogFile "INFO: /boot/grub/grub.cfg content"
3162    LogFile "-------------"
3163    cat /boot/grub/grub.cfg >> $LOGFILE
3164    LogFile "-------------"
3165fi
3166if [ -r /boot/grub/device.map ]; then
3167    LogFile "-------------"
3168    LogFile "INFO: /boot/grub/device.map content"
3169    LogFile "-------------"
3170    cat /boot/grub/device.map >> $LOGFILE
3171    LogFile "-------------"
3172fi
3173if [ -r /etc/lilo.conf ]; then
3174    LogFile "-------------"
3175    LogFile "INFO: /etc/lilo.conf content"
3176    LogFile "-------------"
3177    cat /etc/lilo.conf >> $LOGFILE
3178fi
3179LogFile "Full fdisk info"
3180LogFile "---------------"
3181$FDISK -l >> $LOGFILE
3182LogFile "----------------"
3183LogFile "List of extra modules is:"
3184LogFile "$EXTRA_MODS"
3185LogFile "-------------"
3186
3187# Compute libata version
3188laver=`modinfo libata 2> /dev/null | grep -Ei '^Version:' | cut -d: -f2 | cut -d. -f1 | sed 's/  *//g' 2> /dev/null`
3189# If libata v2 is used then remove ide-generic as it will perturbate boot
3190if [ "`echo $MODULES | grep libata`" ]; then
3191    if [ "$laver" = "2" ]; then
3192        DENY_MODS="$DENY_MODS ide-generic"
3193        LogFile "INFO: ide-generic removed from module list as your system uses libata v2+"
3194        LogFile "-------------"
3195    fi
3196fi
3197
3198# Check for McAfee which disturbs the access to some files (tgz in articular)
3199if [ "x`cat /proc/linuxshield/enabled 2>/dev/null`" = "x1" ]; then
3200    LogFile "WARNING: McAfee LinuxShield is enabled. McAfee might block access to certain special files."
3201    LogFile "WARNING: Check in /var/opt/NAI/LinuxShield/etc/nailsd.cfg for 'nailsd.profile.OAS.action.error: Block'"
3202    LogFile "WARNING: You have two options:"
3203    LogFile "WARNING:  - Exclude all directories with special files (check McAfee System Events Log)"
3204    LogFile "WARNING:  - Disable the scanner during the backup"
3205fi
3206
3207# Check for ISO_CMD command
3208if [ ! -x $ISO_CMD ]; then
3209    LogFile "NOTE: No CD image (ISO file) utility found"
3210fi
3211
3212FLOPPY_WAS_MOUNTED=""
3213for mtpt in /media/floppy /mnt/floppy /floppy ; do
3214    if mount | grep -w $mtpt &> /dev/null ; then
3215        FLOPPY_WAS_MOUNTED="$FLOPPY_WAS_MOUNTED $mtpt"
3216        umount $mtpt
3217    fi
3218done
3219
3220#
3221# If we have a USB device we need to store info
3222# and remove it from the parameters line
3223#
3224if [ "$#" -ne "0" ] ; then
3225    if [ "$1" = "--usb" ] ; then
3226        shift
3227        USBDEVICE=$1
3228        if [ _"$USBDEVICE" = _"" ]; then
3229            Die "No USB device specified"
3230        fi
3231        shift
3232    fi
3233fi
3234
3235if [ "$#" -ne "0" ] ; then
3236    if [ "$1" = "--findkernel" ] ; then
3237        resk=`TryToFindKernelPath`
3238        # Avoids logfile content for mondo
3239        export MONDO_SHARE=""
3240        if [ "$resk" = "" ] ; then
3241            if [ $KERNEL_IS_XEN = "yes" ]; then
3242                echo "$xenkernelpath"
3243                LogFile "INFO: xenkernelpath = $xenkernelpath"
3244                MindiExit 0
3245            else
3246                MindiExit -1
3247            fi
3248        else
3249            echo "$resk"
3250            LogFile "INFO: kernelpath = $resk"
3251            MindiExit 0
3252        fi
3253    elif [ "$1" = "--locatedeps" ] ; then
3254        [ ! "$2" ] && Die "Please specify the binary to look at"
3255        LocateDeps $*
3256        # Avoids logfile content for mondo
3257        export MONDO_SHARE=""
3258        MindiExit $?
3259    elif [ "$1" = "--readalllink" ] ; then
3260        [ ! "$2" ] && Die "Please specify the binary to look at"
3261        # Avoids logfile content for mondo
3262        export MONDO_SHARE=""
3263        ReadAllLink $2
3264        MindiExit $?
3265    elif [ "$1" = "--makemessage" ] ; then
3266        MakeMessageFile | cut -c1-80
3267        MindiExit 0
3268    elif [ "$1" = "--makemountlist" ] ; then
3269        [ ! "$2" ] && Die "Please specify the output file"
3270        MakeMountlist $2
3271        CheckMountlist $2
3272        # Avoids logfile content for mondo
3273        export MONDO_SHARE=""
3274        MindiExit $?
3275    elif [ "$1" = "-V" ] || [ "$1" = "-v" ] || [ "$1" = "--version" ] || [ "$1" = "-version" ] ; then
3276        echo "Mindi v$MINDI_VERSION"
3277        # Avoids logfile content for mondo
3278        export MONDO_SHARE=""
3279        MindiExit 0
3280    elif [ "$#" -ge "9" ] && [ "$1" = "--custom" ] ; then
3281        MONDO_TMP=$2
3282        # Change MINDI_TMP for the one provided by mondo
3283        # So that it can get back the built files
3284        if [ _"$MONDO_TMP" = _"" ]; then
3285            Die "MONDO_TMP is empty, aborting"
3286        fi
3287        if [ _"$MONDO_TMP" = _"/" ]; then
3288            Die "MONDO_TMP is /, aborting"
3289        fi
3290        mv $MINDI_TMP/* $MINDI_TMP/.??* $MONDO_TMP 2>> $LOGFILE
3291        rmdir $MINDI_TMP
3292        export MINDI_TMP=$MONDO_TMP
3293        mkdir -p $MINDI_TMP
3294
3295        # This is the scratch dir in mondo - subdir images
3296        MINDI_CACHE=$3
3297
3298        kernelpath=$4; [ "$kernelpath" = "(null)" ] && kernelpath=""
3299        [ "$kernelpath" = "" ] && kernelpath=`TryToFindKernelPath`
3300       
3301###
3302### Sq-Modification...
3303### Attempt to locate kernel specific module path
3304### if module path is found then use it other wise use uname -r to set it...
3305###
3306        if [ $KERNEL_IS_XEN = "yes" ]; then
3307            LogAll "INFO: xenkernelpath = $xenkernelpath"
3308        fi
3309        kernelname=`echo $kernelpath | cut -d'-' -f2- | sed 's/.[bg]z[2]*$//'`
3310        if [ ! -d "/lib/modules/$kernelname" ] && [ "$kernelpath" != "FAILSAFE" ]
3311        then
3312           LogAll "WARNING: Module path for ${kernelpath} not found..."
3313           LogAll "         using running kernel\'s modules."
3314           kernelname=$KERVERRUN
3315        else
3316           LogAll "Using modules for kernel: ${kernelname}"
3317        fi
3318        LogAll "INFO: kernelname = $kernelname"
3319        LogAll "INFO: kernelpath = $kernelpath"
3320###
3321### end of Sq-Modification
3322###
3323        TAPEDEV=$5
3324        TAPESIZE=$6
3325        FILES_IN_FILELIST=$7
3326        USE_LZO=$8
3327        CDRECOVERY=$9
3328        if [ "${10}" = "(null)" ] || [ "${10}" = "" ] ; then
3329            IMAGE_DEVS=""
3330        else
3331            IMAGE_DEVS="`echo "${10}" | tr '|' ' '`"
3332        fi
3333        if [ "${11}" ] ; then
3334            LILO_OPTIONS=""
3335    #       LogAll "INFO: LILO will use conservative settings, to be compatible with older BIOSes."
3336        fi
3337        LAST_FILELIST_NUMBER=${12}
3338        ESTIMATED_TOTAL_NOOF_SLICES=${13}
3339        export MINDI_EXCLUDE_DEVS="${14}"
3340        USE_COMP="${15}"
3341        USE_LILO="${16}"
3342        USE_STAR="${17}"
3343        INTERNAL_TAPE_BLOCK_SIZE="${18}"
3344        DIFFERENTIAL="${19}"
3345        USE_GZIP="${20}"
3346        NOT_BOOT="${21}"
3347        [ "$USE_COMP" = "" ] && USE_COMP=yes
3348        [ "$USE_GZIP" = "" ] && USE_GZIP=no
3349        [ "$NOT_BOOT" = "" ] && NOT_BOOT=no
3350        [ "$TAPEDEV" ] && LogIt "INFO: This is a tape-based backup. Fine."
3351        # MONDO_ROOT is the real scratchdir
3352        MONDO_ROOT=`echo $MINDI_CACHE | sed 's/\(.*\)\/.*/\1/'`
3353        if [ _"$MONDO_ROOT" != _"" ]; then
3354            mkdir -p $MONDO_ROOT
3355        else
3356            Die "MONDO_ROOT is undefined"
3357        fi
3358    else
3359        LogScreen "Syntax: mindi (--custom ....)"
3360        MindiExit -1
3361    fi
3362fi
3363
3364if [ _"$MINDI_CACHE" != _"" ]; then
3365    rm -rf $MINDI_CACHE/* 2> /dev/null
3366    mkdir -p $MINDI_CACHE
3367fi
3368
3369[ "$CDRECOVERY" = "yes" ] || CDRECOVERY=no
3370
3371if [ _"$MONDO_SHARE" = _"" ]; then
3372    LogIt "Mindi Linux mini-distro generator v$MINDI_VERSION"
3373    LogIt "Latest Mindi is available from http://www.mondorescue.org"
3374    LogIt "BusyBox sources are available from http://www.busybox.net"
3375    LogIt "------------------------------------------------------------------------------"
3376else
3377    LogFile "INFO: You are using Mindi-Linux v$MINDI_VERSION to make boot+data disks"
3378fi
3379if [ -f $MINDI_LIB/rootfs/bin/busybox ]; then
3380    LogIt "Mindi-`$MINDI_LIB/rootfs/bin/busybox 2>&1 | head -1`"
3381else
3382    LogIt "ERROR: Unable to find mindi-busybox, please install it"
3383    MindiExit -1
3384fi
3385
3386for i in loop cdrom ide-cd isofs linear raid0 raid1 raid5 ; do
3387    modinfo $i 2> /dev/null 1> /dev/null
3388    if [ $? -eq 0 ]; then
3389        modprobe $i 2>&1 > /dev/null
3390    fi
3391done
3392
3393KERN_DISK_MADE=""
3394
3395LogFile "DIFFERENTIAL = $DIFFERENTIAL"
3396LogFile "INTERNAL TAPE BLOCK SIZE = $INTERNAL_TAPE_BLOCK_SIZE"
3397LogFile "NOT_BOOT = '$NOT_BOOT'"
3398if [ "$NOT_BOOT" != "" ] && [ "$NOT_BOOT" != "0" ] && [ "$NOT_BOOT" != "no" ] ; then
3399    LogIt "INFO: Just creating mondo-restore.cfg and a small all.tar.gz for Mondo. Nothing else."
3400    MakeMondoConfigFile $MINDI_TMP/mondo-restore.cfg
3401    MakeMountlist $MINDI_TMP/mountlist.txt
3402    CheckMountlist $MINDI_TMP/mountlist.txt
3403    mkdir -p $MINDI_TMP/small-all/tmp
3404    cd "$MINDI_TMP/small-all"
3405    cp -f $MINDI_TMP/{mountlist.txt,mondo-restore.cfg,filelist.full.gz,biggielist.txt} tmp 2>> $LOGFILE || Die "Cannot copy small all.tar.gz"
3406    tar -cv ./tmp | gzip -9 > $MINDI_TMP/all.tar.gz 2>> $MINDI_TMP/$$.log || Die "Cannot make small all.tar.gz" $MINDI_TMP/$$.log
3407    sleep 2
3408    LogIt "Done. Exiting."
3409    MindiExit 0
3410fi
3411
3412if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3413    LogIt "INFO: Including the generation of a Bootable USB device on $USBDEVICE"
3414fi
3415
3416if [ "$kernelpath" = "" ] ; then
3417    [ _"$MONDO_SHARE" != _"" ] && Die "Please use -k <path> to specify kernel."
3418    echo -en "Do you want to use your own kernel to build the boot disk ([y]/n) ?"
3419    read ch
3420    if [ "$ch" != "n" ] && [ "$ch" != "N" ] ; then
3421        USE_OWN_KERNEL="yes"
3422    else
3423        USE_OWN_KERNEL="no"
3424    fi
3425    if [ "$USE_OWN_KERNEL" = "yes" ]; then
3426        YOUR_KERNEL_SUCKS=""
3427        kernelpath=`TryToFindKernelPath`
3428        if [ "$kernelpath" = "" ] ; then
3429            echo -n "Please enter kernel path : "
3430            read kernelpath
3431        fi
3432    else
3433        YOUR_KERNEL_SUCKS="That's why you're using mine, dude. :-)"
3434    fi
3435fi
3436if [ "$YOUR_KERNEL_SUCKS" != "" ] || [ "$kernelpath" = "" ] || [ "$kernelpath" = "SUCKS" ] || [ "$kernelpath" = "FAILSAFE" ] ; then
3437    # If we have a distribution-specific script for finding a FAILSAFE kernel, use it.
3438    if [ -f "$MINDI_LIB/FindDistroFailsafe" ] && [ ! "$1" = "--makemountlist" ]; then
3439        source $MINDI_LIB/FindDistroFailsafe
3440        # Log kernel image
3441        LogIt "INFO: FAILSAFE kernel image to be used is: $FAILSAFE_KBIN ($FAILSAFE_KVER)"
3442        kernelpath="$FAILSAFE_KBIN"
3443        LogIt "INFO: I shall include a failsafe kernel, not your kernel, in the boot disks."
3444        LogIt "      The failsafe kernel is $kernelpath."
3445        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3446        LogIt "      disks then it may still be a result of a problem with your kernel."
3447        pwd=`pwd`
3448        cd "$MINDI_TMP"
3449        mkdir -p lib/modules
3450        cp -a "/lib/modules/$FAILSAFE_KVER" "lib/modules/$FAILSAFE_KVER" || Die "Cannot copy kernel modules."
3451        cd "$pwd"
3452    else
3453        kernelpath=$MINDI_LIB/vmlinuz
3454        LogIt "INFO: I shall include Mindi's failsafe kernel, not your kernel, in the boot disks."
3455        LogIt "      However, you are still running your kernel. If Mindi fails to create your"
3456        LogIt "      disks then it may still be a result of a problem with your kernel."
3457        pwd=`pwd`
3458        cd "$MINDI_TMP"
3459        bzip2 -dc $MINDI_LIB/lib.tar.bz2 | tar -x || Die "Cannot unzip lib.tar.bz2"
3460        cd "$pwd"
3461    fi
3462    YOUR_KERNEL_SUCKS="Your kernel sucks"
3463fi
3464echo -e "Mindi's temp dir = $MINDI_TMP \nMindi's output dir=$MINDI_CACHE" >> $LOGFILE
3465[ "$(($RANDOM%64))" -eq "0" ] && LogIt "INFO: Dude, I've looked inside your computer and it's really dusty..."
3466
3467[ "$YOUR_KERNEL_SUCKS" ] && [ ! "$FAILSAFE_KVER" ] && Die "Please install mindi-kernel package. You need it.\nGo to http://www.mondorescue.org and download it, then install it."
3468
3469PrepareDataDiskImages
3470
3471ramdisk_size=$(($size_of_all_tools+$EXTRA_SPACE))
3472rds=$(($ramdisk_size-$((ramdisk_size%4096))))
3473export ramdisk_size=$rds
3474
3475LogFile "INFO: Ramdisk will be $ramdisk_size KB"
3476if [ "$ARCH" = "ia64" ] ; then
3477    PrepareBootDiskImage_LILO $kernelpath || Die "Failed to create ia64 image disk image."
3478else
3479    PrepareBootDiskImage_ISOLINUX $kernelpath || Die "Failed to create $ramdisk_size KB disk image."
3480fi
3481
3482[ -e "$MINDI_LIB/memtest.img" ] && BOOT_MEDIA_MESSAGE="$BOOT_MEDIA_MESSAGE\n\
3483...Or type 'memtest' to test your PC's RAM thoroughly.\n"
3484
3485if [ _"$MONDO_SHARE" = _"" ]; then
3486    ListImagesForUser
3487    OfferToMakeBootableISO
3488    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ]; then
3489        OfferToMakeBootableUSB
3490    fi
3491    LogAll "Finished."
3492elif [ "$TAPEDEV" ] ; then
3493    if [ "$ARCH" != "ia64" ] ; then
3494        # We need to keep the img file as boot file for ia64 platform
3495        rm -f $MINDI_CACHE/{*img,*iso}
3496    else
3497        rm -f $MINDI_CACHE/*iso
3498    fi
3499    if [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3500        OfferToMakeBootableUSB
3501    fi
3502    OfferToMakeBootableISO
3503    if [ -e "$MINDI_CACHE/all.tar.gz" ] ; then
3504        cp -f $MINDI_CACHE/all.tar.gz $MINDI_TMP/ 2>> $LOGFILE
3505    else
3506        Die "Cannot find all.tar.gz, to be written to tape"
3507    fi
3508elif [ "$PROMPT_MAKE_USB_IMAGE" = "yes" ] && [ "$USBDEVICE" != "" ]; then
3509    OfferToMakeBootableUSB
3510else
3511    OfferToMakeBootableISO
3512fi
3513# cleanup
3514LogAll "INFO: $FRIENDLY_OUTSTRING"
3515for mtpt in $FLOPPY_WAS_MOUNTED ; do
3516    mount $mtpt
3517done
3518MindiExit 0
Note: See TracBrowser for help on using the repository browser.