source: MondoRescue/branches/stable/mindi/rootfs/sbin/start-nfs @ 1842

Last change on this file since 1842 was 1842, checked in by Bruno Cornec, 13 years ago
  • Fix lack of /etc/raidtab at restore rime in the right place
  • Adds support for nls_utf8 and pata_serverworks Patches from Dirk Husung (
  • Add efibootmgr to deplist.txt in order to be able to modify EFI menu at restore time on ia64
  • Usage of the new testver param of pb 0.8.12 to deliver 2.2.5 packages in a test dir.
  • Update pbcl files for upcoming delivery of 2.2.5
  • Fix an issue on parted output (K instead of KB) in parted2fdisk at restore time
  • Adds support for alb/aft types of bonding on Intel cards (Mark Pinkerton <>)
  • Escape variables in a perl script like mindi-bkphw
  • Better Proliant support at restore time now.
  • Fix a label bug where the variable label should also be re-initialized at each loop
  • start-nfs should NOT do exit => kernel panix as init exits
  • some other fixes for init on denymods
  • Adds boot options denymods (for udev) and forcemods (if not udev)
  • kqemu is denied. Probably should also be done for kvm stuff
  • Fix again the bug on modules link at root of the initrd. Hopefully for good.
  • Wait more around the USB CD emulated by iLO as it takes up to 5 seconds to come up
  • Attempt to fix udev support for RHEL 5.1
  • Better support for automatic iLO Virtual Media with udev
  • Some VMWare support improvements (however, it seems that VMWare support won't be possible anytime soon)
  • during init at restore time, copy all static evices availble for udev, as some distro implementation are no

t yet supported correctly for udev. Not very elegant, but should solve our current issues

  • Fedora 8 now supported as a build target for pb
  • svn.log removed.
  • dependencies reviewd for rhel_3
  • Attempt to fix the lack of modules loaded at restore time - especially fs device drivers
  • removes bkphw dir before potential creation
  • render mount command more vebose at restore time
  • Should fix #217
  • Increase BOOT_SIZE and EXTRA_SIZE to support features such as HW recovery
  • Handles udev.files files which could be symlinks
  • Improve udev support for distro with compressed modules (mdv e.g.)
  • Fix modules.dep copy
  • /sbin/pam_console_apply is needed by mdv udev conf
  • Adds support for nohw boot option to avoid re-setuping the HW conf
  • Improved support for Proliant on cpqacuxe
  • RstHW should be called after driver initialization
  • For debian/ubuntu mindi dpends on mindi-busybox
  • Update mindi-busybox pbcl for correct debian changelog generation, and up2date infos
  • Should fix #215
  • Fix #214 (Thanks to xdelaruelle)
  • Fix again svn.log not used anymore with new pb version
  • Adaptation of build process to upcoming 0.8.12 version of pb
  • Remove MONOTONIC clock to continue to support 2.4 kernels (RHEL 3 e.g. or ESX)
  • Attempt to solve ia64 BMC access through the serial port
  • parted2fdisk binary no more generated
  • do not require perl modules ( at restore time
  • try to avoid modprobe messages at restore time
  • on ia64 now use the perl script parted2fdisk at retore time also
  • Also modprobe modules for udev after decompressing the additional ones
  • replace gzip -v9 by gzip -c9. Fix a bug at least on ia64
  • For all modules supported, create symlinks under the mountpoint and extract dev files as some are not automat ically created at the moment
  • Support /vmfs/volumes for ESX
  • Finally do not use vdf for ESX. Only creates issues.
  • Avoids continuing hw support if no product name found
  • Improves ia64 support for bootable image build
  • Fix a potential problem with ramdisk_blocksize param
  • MAKEDEV should also be included in deplist.txt
  • More fixes for udev support for Debian
  • Do not mount /boot if it's already mounted - avoids ESX hang
  • Fix NICs renumbering on Debian at least
  • Udev startup improvement to support iLO + NFS so modprobing all modules seems required as of now
  • Update to version 1.7.3 of busybox for pb
  • Load USB earlier in order to support KBD such as with iLO
  • Do busybox ldd first in order to create a potential /lib64 link correctly and then use it later in the image
  • Use variable DF in mindi to be able to support the ESX vdf
  • Fix mindi for Debian x86_64 where /lib64 is a link
  • Fix issue at restore time for ext2fs params not reused (Fix from Klaus Ade Johnstad <>)
  • Do not copy udev files if they do not exist In udev case do not insert modules at all (udev should do it alone) May avoid the issue with rhel4.5 kernel ? To be tested
  • Update dependencies for rpm base build as well
  • And also perl is a debian/ubuntu dep
  • Better debian/ubuntu dependecies requirements (mtools)
  • Fix modes on mindi-bkphw (Thanks Phil Walker
  • Complete rev [1771] for upper case RESTORE cli with syslinux as well
  • Update mindi-busybox to 1.7.3
  • Use RESTORE consistently across mondo to restore without interaction (report from Takeshi Shoji

(merge -r1769:1841 $SVN_M/branches/2.2.5)

  • Property svn:executable set to *
File size: 2.4 KB
3# $Id$
5# This script sets up the network + NFS environment if needed.
9# number of ping
12# Get info from config file
13ipdev=`grep nfs-dev /tmp/mondo-restore.cfg | cut -d'=' -f2-`
14ipaddress=`grep nfs-client-ipaddr /tmp/mondo-restore.cfg | cut -d'=' -f2-`
15ipnetmask=`grep nfs-client-netmask /tmp/mondo-restore.cfg | cut -d'=' -f2-`
16ipbroadcast=`grep nfs-client-broadcast /tmp/mondo-restore.cfg | cut -d'=' -f2-`
17ipgateway=`grep nfs-client-defgw /tmp/mondo-restore.cfg | cut -d'=' -f2-`
19export nfsmount=`grep nfs-server-mount /tmp/mondo-restore.cfg | cut -d'=' -f2-`
20export imgname=`grep iso-prefix /tmp/mondo-restore.cfg | cut -d'=' -f2-`
21if [ "$imgname" = "" ]; then
22    export imgname="mondorescue"
24export dirimg=`grep nfs-server-path /tmp/mondo-restore.cfg | cut -d'=' -f2-`
25if [ "$dirimg" = "" ]; then
26    export dirimg="/"
29# info from cmdline are predominent
30for i in `cat /proc/cmdline` ; do
31    echo $i | grep -qi ping= && ipcount=`echo $i | cut -d= -f2`
32    echo $i | grep -qi ipconf= && ipconf=`echo $i | cut -d= -f2`
33    echo $i | grep -qi nfsmount= && export nfsmount=`echo $i | cut -d= -f2`
34    echo $i | grep -qi prefix= && export imgname=`echo $i | cut -d= -f2`
37if [ "$ipdev" != "" ] || [ "$ipconf" != "" ]; then
38    # Network configuration stored during archive
39    # or on cmdline so network wanted => starting it
40    LogIt "Starting Network..."
42    # Activate loobback
43    ifconfig lo
45    echo "$ipconf" | grep -q "dhcp"
46    if [ $? -eq 0 ]; then
47        ipdev=`echo $ipconf | cut -d: -f1`
48        LogIt "Making DHCP request on $ipdev"
49        udhcpc -i $ipdev
50    else
51        if [ "$ipconf" != "" ]; then
52            ipdev=`echo $ipconf | cut -d: -f1`
53            ipaddress=`echo $ipconf | cut -d: -f2`
54            ipnetmask=`echo $ipconf | cut -d: -f3`
55            ipbroadcast=`echo $ipconf | cut -d: -f4`
56            ipgateway=`echo $ipconf | cut -d: -f5`
57        fi
58        LogIt "Configuring $ipdev statically ($ipaddress/$ipnetmask)"
59        ifconfig $ipdev $ipaddress netmask $ipnetmask broadcast $ipbroadcast
60        route add default gw $ipgateway
61    fi
63    # ping server helps waking interface up
64    LogIt "Pinging NFS server..."
65    nfs_server_ipaddr=`echo $nfsmount | cut -d: -f1`
66    ping -c $ipcount $nfs_server_ipaddr 
68    # Finally mounts the NFS share
69    LogIt "Mounting NFS share ($nfsmount) on /tmp/isodir..."
70    mount -t nfs -o nolock $nfsmount /tmp/isodir
72    LogIt "Mounting NFS image ${imgname}-1.iso in $dirimg on /mnt/cdrom in loopback"
73    mount -o ro -t iso9660 /tmp/isodir/$dirimg/${imgname}-1.iso /mnt/cdrom
Note: See TracBrowser for help on using the repository browser.