Last change
on this file since 1924 was 1842, checked in by Bruno Cornec, 17 years ago |
- Fix lack of /etc/raidtab at restore rime in the right place
- Adds support for nls_utf8 and pata_serverworks
Patches from Dirk Husung (husung_at_tu-harburg.de)
- Add efibootmgr to deplist.txt in order to be able to modify EFI menu at restore time on ia64
- Usage of the new testver param of pb 0.8.12 to deliver 2.2.5 packages in a test dir.
- Update pbcl files for upcoming delivery of 2.2.5
- Fix an issue on parted output (K instead of KB) in parted2fdisk at restore time
- Adds support for alb/aft types of bonding on Intel cards (Mark Pinkerton <Mark.Pinkerton_at_emageon.com>)
- Escape variables in a perl script like mindi-bkphw
- Better Proliant support at restore time now.
- Fix a label bug where the variable label should also be re-initialized at each loop
- start-nfs should NOT do exit => kernel panix as init exits
- some other fixes for init on denymods
- Adds boot options denymods (for udev) and forcemods (if not udev)
- kqemu is denied. Probably should also be done for kvm stuff
- Fix again the bug on modules link at root of the initrd. Hopefully for good.
- Wait more around the USB CD emulated by iLO as it takes up to 5 seconds to come up
- Attempt to fix udev support for RHEL 5.1
- Better support for automatic iLO Virtual Media with udev
- Some VMWare support improvements (however, it seems that VMWare support won't be possible anytime soon)
- during init at restore time, copy all static evices availble for udev, as some distro implementation are no
t yet supported correctly for udev. Not very elegant, but should solve our current issues
- Fedora 8 now supported as a build target for pb
- svn.log removed.
- dependencies reviewd for rhel_3
- Attempt to fix the lack of modules loaded at restore time - especially fs device drivers
- removes bkphw dir before potential creation
- render mount command more vebose at restore time
- Should fix #217
- Increase BOOT_SIZE and EXTRA_SIZE to support features such as HW recovery
- Handles udev.files files which could be symlinks
- Improve udev support for distro with compressed modules (mdv e.g.)
- Fix modules.dep copy
- /sbin/pam_console_apply is needed by mdv udev conf
- Adds support for nohw boot option to avoid re-setuping the HW conf
- Improved support for Proliant on cpqacuxe
- RstHW should be called after driver initialization
- For debian/ubuntu mindi dpends on mindi-busybox
- Update mindi-busybox pbcl for correct debian changelog generation, and up2date infos
- Should fix #215
- Fix #214 (Thanks to xdelaruelle)
- Fix again svn.log not used anymore with new pb version
- Adaptation of build process to upcoming 0.8.12 version of pb
- Remove MONOTONIC clock to continue to support 2.4 kernels (RHEL 3 e.g. or ESX)
- Attempt to solve ia64 BMC access through the serial port
- parted2fdisk binary no more generated
- do not require perl modules (strict.pm) at restore time
- try to avoid modprobe messages at restore time
- on ia64 now use the perl script parted2fdisk at retore time also
- Also modprobe modules for udev after decompressing the additional ones
- replace gzip -v9 by gzip -c9. Fix a bug at least on ia64
- For all modules supported, create symlinks under the mountpoint and extract dev files as some are not automat ically created at the moment
- Support /vmfs/volumes for ESX
- Finally do not use vdf for ESX. Only creates issues.
- Avoids continuing hw support if no product name found
- Improves ia64 support for bootable image build
- Fix a potential problem with ramdisk_blocksize param
- MAKEDEV should also be included in deplist.txt
- More fixes for udev support for Debian
- Do not mount /boot if it's already mounted - avoids ESX hang
- Fix NICs renumbering on Debian at least
- Udev startup improvement to support iLO + NFS so modprobing all modules seems required as of now
- Update to version 1.7.3 of busybox for pb
- Load USB earlier in order to support KBD such as with iLO
- Do busybox ldd first in order to create a potential /lib64 link correctly and then use it later in the image
- Use variable DF in mindi to be able to support the ESX vdf
- Fix mindi for Debian x86_64 where /lib64 is a link
- Fix issue at restore time for ext2fs params not reused (Fix from Klaus Ade Johnstad <klaus_at_skolelinux.no>)
- Do not copy udev files if they do not exist In udev case do not insert modules at all (udev should do it alone) May avoid the issue with rhel4.5 kernel ? To be tested
- Update dependencies for rpm base build as well
- And also perl is a debian/ubuntu dep
- Better debian/ubuntu dependecies requirements (mtools)
- Fix modes on mindi-bkphw (Thanks Phil Walker phil.walker_at_hp.com)
- Complete rev [1771] for upper case RESTORE cli with syslinux as well
- Update mindi-busybox to 1.7.3
- Use RESTORE consistently across mondo to restore without interaction (report from Takeshi Shoji t.shoji_at_tripodw.jp)
(merge -r1769:1841 $SVN_M/branches/2.2.5)
|
File size:
1.0 KB
|
Line | |
---|
1 | # List device nodes that need to be created by udev:
|
---|
2 |
|
---|
3 | # Standard nodes:
|
---|
4 | L fd /proc/self/fd
|
---|
5 | L stdin /proc/self/fd/0
|
---|
6 | L stdout /proc/self/fd/1
|
---|
7 | L stderr /proc/self/fd/2
|
---|
8 | L core /proc/kcore
|
---|
9 | #L sndstat /proc/asound/oss/sndstat
|
---|
10 | #L MAKEDEV /sbin/MAKEDEV
|
---|
11 |
|
---|
12 | # These are needed for fs to be mounted:
|
---|
13 | D pts
|
---|
14 | D shm
|
---|
15 |
|
---|
16 | # These are needed because their drivers cannot be autoprobed in any way:
|
---|
17 | M fd0 b 2 0
|
---|
18 | M fd1 b 2 1
|
---|
19 | M ppp c 108 0
|
---|
20 | M loop0 b 7 0
|
---|
21 | D net
|
---|
22 | M net/tun c 10 200
|
---|
23 | M raw1394 c 171 0
|
---|
24 | M sg0 c 21 0
|
---|
25 | M sg1 c 21 1
|
---|
26 | M sr0 b 11 0
|
---|
27 | M sr1 b 11 1
|
---|
28 | M st0 c 9 0
|
---|
29 | M st1 c 9 1
|
---|
30 | M parport0 c 99 0
|
---|
31 | D cpu
|
---|
32 | D cpu/0
|
---|
33 | M cpu/0/cpuid c 203 0
|
---|
34 | M cpu/0/microcode c 10 184
|
---|
35 | M cpu/0/msr c 202 0
|
---|
36 | M lp0 c 6 0
|
---|
37 | M rawctl c 162 0
|
---|
38 | # sometimes, nvidia driver is slow to create these devices and X failed to start:
|
---|
39 | M nvidia0 c 195 0
|
---|
40 | M nvidiactl c 195 255
|
---|
41 |
|
---|
42 | # Addition for mindi
|
---|
43 | M tty0 c 4 0
|
---|
44 | M tty1 c 4 1
|
---|
45 | M tty2 c 4 2
|
---|
46 | M tty3 c 4 3
|
---|
47 | M tty4 c 4 4
|
---|
48 | M tty5 c 4 5
|
---|
49 | M tty6 c 4 6
|
---|
50 | M tty7 c 4 7
|
---|
51 | M tty8 c 4 8
|
---|
52 | M ttyS0 c 4 64
|
---|
53 | M ttyS1 c 4 65
|
---|
54 | L console /dev/tty0
|
---|
55 | L tty /dev/tty0
|
---|
56 |
|
---|
57 | M null c 1 3
|
---|
Note:
See
TracBrowser
for help on using the repository browser.