source: MondoRescue/branches/stable/mindi-busybox/testsuite/runtest @ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 12 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

  • Property svn:executable set to *
File size: 2.6 KB
Line 
1#!/bin/sh
2
3[ -n "$srcdir" ] || srcdir=$(pwd)
4[ -n "$bindir" ] || bindir=$(dirname $(pwd))
5PATH=$bindir:$PATH
6
7# Run old-style test.
8
9run_applet_testcase()
10{
11    local applet=$1
12    local testcase=$2
13
14    local status=0
15    local RES=
16
17    local uc_applet=$(echo $applet | tr a-z A-Z)
18    local testname=$(basename $testcase)
19
20    if grep -q "^# CONFIG_${uc_applet} is not set$" $bindir/.config; then
21        echo UNTESTED: $testname
22        return 0
23    fi
24
25    if grep -q "^# FEATURE: " $testcase; then
26        local feature=`sed -ne 's/^# FEATURE: //p' $testcase`
27
28        if grep -q "^# ${feature} is not set$" $bindir/.config; then
29            echo UNTESTED: $testname
30            return 0
31        fi
32    fi
33
34    rm -rf tmp
35    mkdir -p tmp
36    pushd tmp > /dev/null
37
38    d=$srcdir sh -x -e $testcase >.logfile.txt 2>&1 || status=$?
39
40    if [ $status -ne 0 ] ; then
41        echo FAIL: $testname
42        if [ $verbose -gt 0 ]; then
43            cat .logfile.txt
44        fi
45        status=$?
46    else
47        echo PASS: $testname
48        rm -f .logfile.txt
49        status=$?
50    fi
51
52    popd > /dev/null
53    rm -rf tmp
54
55    return $status
56}
57
58run_applet_tests()
59{
60    local applet=$1
61
62    local status=0
63
64    for testcase in $srcdir/$applet/*; do
65        if [ "$testcase" = "$srcdir/$applet/CVS" ]; then
66            continue
67        fi
68
69        if run_applet_testcase $applet $testcase; then
70            :
71        else
72            status=1
73        fi
74    done
75
76    return $status
77}
78
79
80status=0
81verbose=0
82
83if [ x"$1" = x"-v" ]; then
84    verbose=1
85    export VERBOSE=$verbose
86    shift
87fi
88
89if [ $# -ne 0 ]; then
90    applets=$(cd $srcdir ; for i in $@; do ls ${i}* ; done)
91else
92    applets=$(ls $srcdir)
93fi
94
95# Populate a directory with links to all busybox applets
96
97LINKSDIR="$bindir/runtest-tempdir-links"
98implemented=$($bindir/busybox 2>&1 |
99    while read line
100    do
101        if test x"$line" = x"Currently defined functions:"
102        then
103            xargs | sed 's/,//g'
104            break
105        fi
106    done
107    )
108rm -rf "$LINKSDIR" 2>/dev/null
109mkdir "$LINKSDIR"
110for i in $implemented
111do
112    ln -s $bindir/busybox "$LINKSDIR"/$i
113done
114
115# Set up option flags so tests can be selective.
116
117configfile=${bindir:-../../}/.config
118export OPTIONFLAGS=:$(echo $(sed -nr 's/^CONFIG_(.*)=.*/\1/p' $configfile) | sed 's/ /:/g')
119
120for applet in $applets; do
121    if [ "$applet" = "links" ]; then continue; fi
122    if [ "$applet" != "CVS" -a -d "$srcdir/$applet" ]; then
123        if run_applet_tests $applet; then
124            :
125        else
126            status=1
127        fi
128    fi
129
130    # Is this a new-style test?
131    applet=$(echo "$applet" | sed -n 's/\.tests$//p')
132    if [ ${#applet} -ne 0 ]
133    then
134        if [ ! -h "$LINKSDIR/$applet" ] && [ "${applet:0:4}" != "all_" ]
135        then
136            echo "SKIPPED: $applet (not built)"
137            continue
138        fi
139        if PATH="$LINKSDIR":$srcdir:$bindir:$PATH \
140                "${srcdir:-.}/$applet".tests
141        then
142            :
143        else
144            status=1
145        fi
146    fi
147
148done
149rm -rf "$LINKSDIR"
150exit $status
Note: See TracBrowser for help on using the repository browser.