source: MondoRescue/branches/stable/mindi-busybox/loginutils/Config.in @ 1770

Last change on this file since 1770 was 1770, checked in by Bruno Cornec, 12 years ago
  • Better output for mindi-busybox revision
  • Remove dummy file created on NFS - report from Arnaud Tiger <arnaud.tiger_at_hp.com>
  • strace useful for debug
  • fix new versions for pb (2.0.0 for mindi and 1.7.2 for mindi-busybox)
  • fix build process for mindi-busybox + options used in that version (dd for label-partitions-as-necessary)
  • fix typo in label-partitions-as-necessary which doesn't seem to work
  • Update to busybox 1.7.2
  • perl is now required at restore time to support uuid swap partitions (and will be used for many other thigs

in the future for sure)

  • next mindi version will be 2.0.0 due to all the changes made in it (udev may break working distros)
  • small optimization in mindi on keyboard handling (one single find instead of multiple)
  • better interaction for USB device when launching mindi manually
  • attempt to automatically guess block disk size for ramdisk
  • fix typos in bkphw
  • Fix the remaining problem with UUID support for swap partitions
  • Updates mondoarchive man page for USB support
  • Adds preliminary Hardware support to mindi (Proliant SSSTK)
  • Tries to add udev support also for rhel4
  • Fix UUID support which was still broken.
  • Be conservative in test for the start-nfs script
  • Update config file for mindi-busybox for 1.7.2 migration
  • Try to run around a busybox bug (1.2.2 pb on inexistant links)
  • Add build content for mindi-busybox in pb
  • Remove distributions content for mindi-busybox
  • Fix a warning on inexistant raidtab
  • Solve problem on tmpfs in restore init (Problem of inexistant symlink and busybox)
  • Create MONDO_CACHE and use it everywhere + creation at start
  • Really never try to eject a USB device
  • Fix a issue with &> usage (replaced with 1> and 2>)
  • Adds magic file to depllist in order to have file working + ldd which helps for debugging issues
  • tty modes correct to avoid sh error messages
  • Use ext3 normally and not ext2 instead
  • USB device should be corrected after reading (take 1st part)
  • Adds a mount_USB_here function derived from mount_CDROM_here
  • usb detection place before /dev detection in device name at restore time
  • Fix when restoring from USB: media is asked in interactive mode
  • Adds USB support for mondorestore
  • mount_cdrom => mount_media
  • elilo.efi is now searched throughout /boot/efi and not in a fixed place as there is no standard
  • untar-and-softlink => untar (+ interface change)
  • suppress useless softlinks creation/removal in boot process
  • avoids udevd messages on groups
  • Increase # of disks to 99 as in mindi at restore time (should be a conf file parameter)
  • skip existing big file creation
  • seems to work correctly for USB mindi boot
  • Adds group and tty link to udev conf
  • Always load usb-torage (even 2.6) to initiate USB bus discovery
  • Better printing of messages
  • Attempt to fix a bug in supporting OpenSusE 10.3 kernel for initramfs (mindi may now use multiple regex for kernel initrd detection)
  • Links were not correctly done as non relative for modules in mindi
  • exclusion of modules denied now works
  • Also create modules in their ordinary place, so that classical modprobe works + copy modules.dep
  • Fix bugs for DENY_MODS handling
  • Add device /dev/console for udev
  • ide-generic should now really be excluded
  • Fix a bug in major number for tty
  • If udev then adds modprobe/insmod to rootfs
  • tty0 is also cretaed with udev
  • ide-generic put rather in DENY_MODS
  • udevd remove from deplist s handled in mindi directly
  • better default for mindi when using --usb
  • Handles dynamically linked busybox (in case we want to use it soon ;-)
  • Adds fixed devices to create for udev
  • ide-generic should not be part of the initrd when using libata v2
  • support a dynamically linked udev (case on Ubuntu 7.10 and Mandriva 2008.0 so should be quite generic) This will give incitation to move to dyn. linked binaries in the initrd which will help for other tasks (ia6 4)
  • Improvement in udev support (do not use cl options not available in busybox)
  • Udev in mindi
    • auto creation of the right links at boot time with udev-links.conf(from Mandriva 2008.0)
    • rework startup of udev as current makes kernel crash (from Mandriva 2008.0)
    • add support for 64 bits udev
  • Try to render MyInsmod? silent at boot time
  • Adds udev support (mandatory for newest distributions to avoid remapping of devices in a different way as on the original system)
  • We also need vaft format support for USB boot
  • Adds libusual support (Ubuntu 7.10 needs it for USB)
  • Improve Ubuntu/Debian? keyboard detection and support
  • pbinit adapted to new pb (0.8.10). Filtering of docs done in it
  • Suppress some mondo warnings and errors on USB again
  • Tries to fix lack of files in deb mindi package
  • Verify should now work for USB devices
  • More log/mesages improvement for USB support
  • - Supress g_erase_tmpdir_and_scratchdir
  • Improve some log messages for USB support
  • Try to improve install in mindi to avoid issues with isolinux.cfg not installed vene if in the pkg :-(
  • Improve mindi-busybox build
  • In conformity with pb 0.8.9
  • Add support for Ubuntu 7.10 in build process
  • Add USB Key button to Menu UI (CD streamer removed)
  • Attempt to fix error messages on tmp/scratch files at the end by removing those dir at the latest possible.
  • Fix a bug linked to the size of the -E param which could be used (Arnaud Tiger/René? Ribaud).
  • Integrate ~/.pbrc content into mondorescue.pb (required project-builder >= 0.8.7)
  • Put mondorescue in conformity with new pb filtering rules
  • Add USB support at restore time (no test done yet). New start-usb script PB varibale added where useful
  • Unmounting USB device before removal of temporary scratchdir
  • Stil refining USB copy back to mondo (one command was not executed)
  • No need to have the image subdor in the csratchdir when USB.
  • umount the USB partition before attempting to use it
  • Remove useless copy from mindi to mondo at end of USB handling

(risky merge, we are raising the limits of 2 diverging branches. The status of stable is not completely sure as such. Will need lots of tests, but it's not yet done :-()
(merge -r1692:1769 $SVN_M/branches/2.2.5)

File size: 6.5 KB
Line 
1#
2# For a description of the syntax of this configuration file,
3# see scripts/kbuild/config-language.txt.
4#
5
6menu "Login/Password Management Utilities"
7
8config FEATURE_SHADOWPASSWDS
9    bool "Support for shadow passwords"
10    default n
11    help
12      Build support for shadow password in /etc/shadow.  This file is only
13      readable by root and thus the encrypted passwords are no longer
14      publicly readable.
15
16config USE_BB_SHADOW
17    bool "  Use busybox shadow password functions"
18    default y
19    depends on USE_BB_PWD_GRP && FEATURE_SHADOWPASSWDS
20    help
21        If you leave this disabled, busybox will use the system's shadow
22        password handling functions.  And if you are using the GNU C library
23        (glibc), you will then need to install the /etc/nsswitch.conf
24        configuration file and the required /lib/libnss_* libraries in
25        order for the shadow password functions to work.  This generally
26        makes your embedded system quite a bit larger.
27
28        Enabling this option will cause busybox to directly access the
29        system's /etc/shadow file when handling shadow passwords.  This
30        makes your system smaller and I will get fewer emails asking about
31        how glibc NSS works).  When this option is enabled, you will not be
32        able to use PAM to access shadow passwords from remote LDAP
33        password servers and whatnot.
34
35config USE_BB_PWD_GRP
36    bool "Use internal password and group functions rather than system functions"
37    default n
38    help
39        If you leave this disabled, busybox will use the system's password
40        and group functions.  And if you are using the GNU C library
41        (glibc), you will then need to install the /etc/nsswitch.conf
42        configuration file and the required /lib/libnss_* libraries in
43        order for the password and group functions to work.  This generally
44        makes your embedded system quite a bit larger.
45
46        Enabling this option will cause busybox to directly access the
47        system's /etc/password, /etc/group files (and your system will be
48        smaller, and I will get fewer emails asking about how glibc NSS
49        works).  When this option is enabled, you will not be able to use
50        PAM to access remote LDAP password servers and whatnot.  And if you
51        want hostname resolution to work with glibc, you still need the
52        /lib/libnss_* libraries.
53
54        If you enable this option, it will add about 1.5k to busybox.
55
56config ADDGROUP
57    bool "addgroup"
58    default n
59    help
60      Utility for creating a new group account.
61
62config FEATURE_ADDUSER_TO_GROUP
63    bool "Support for adding users to groups"
64    default n
65    depends on ADDGROUP
66    help
67      If  called  with two non-option arguments,
68      addgroup will add an existing user to an
69      existing group.
70
71config DELGROUP
72    bool "delgroup"
73    default n
74    help
75      Utility for deleting a group account.
76
77config FEATURE_DEL_USER_FROM_GROUP
78    bool "Support for removing users from groups."
79    default n
80    depends on DELGROUP
81    help
82      If called with two non-option arguments, deluser
83      or delgroup will remove an user from a specified group.
84
85config ADDUSER
86    bool "adduser"
87    default n
88    help
89      Utility for creating a new user account.
90
91config DELUSER
92    bool "deluser"
93    default n
94    help
95      Utility for deleting a user account.
96
97config GETTY
98    bool "getty"
99    default n
100    select FEATURE_SYSLOG
101    help
102      getty lets you log in on a tty, it is normally invoked by init.
103
104config FEATURE_UTMP
105    bool "Support utmp file"
106    depends on GETTY || LOGIN || SU || WHO
107    default n
108    help
109      The file /var/run/utmp is used to track who is currently logged in.
110
111config FEATURE_WTMP
112    bool "Support wtmp file"
113    depends on GETTY || LOGIN || SU || LAST
114    default n
115    select FEATURE_UTMP
116    help
117      The file /var/run/wtmp is used to track when user's have logged into
118      and logged out of the system.
119
120config LOGIN
121    bool "login"
122    default n
123    select FEATURE_SUID
124    select FEATURE_SYSLOG
125    help
126      login is used when signing onto a system.
127
128      Note that Busybox binary must be setuid root for this applet to
129      work properly.
130
131config PAM
132    bool "Support for PAM (Pluggable Authentication Modules)"
133    default n
134    depends on LOGIN
135    help
136      Use PAM in login(1) instead of direct access to password database.
137
138config LOGIN_SCRIPTS
139    bool "Support for login scripts"
140    depends on LOGIN
141    default n
142    help
143      Enable this if you want login to execute $LOGIN_PRE_SUID_SCRIPT
144      just prior to switching from root to logged-in user.
145
146config FEATURE_NOLOGIN
147    bool "Support for /etc/nologin"
148    default y
149    depends on LOGIN
150    help
151      The file /etc/nologin is used by (some versions of) login(1).
152      If it exists, non-root logins are prohibited.
153
154config FEATURE_SECURETTY
155    bool "Support for /etc/securetty"
156    default y
157    depends on LOGIN
158    help
159      The file /etc/securetty is used by (some versions of) login(1).
160      The file contains the device names of tty lines (one per line,
161      without leading /dev/) on which root is allowed to login.
162
163config PASSWD
164    bool "passwd"
165    default n
166    select FEATURE_SUID
167    select FEATURE_SYSLOG
168    help
169      passwd changes passwords for user and group accounts.  A normal user
170      may only change the password for his/her own account, the super user
171      may change the password for any account.  The administrator of a group
172      may change the password for the group.
173
174      Note that Busybox binary must be setuid root for this applet to
175      work properly.
176
177config FEATURE_PASSWD_WEAK_CHECK
178    bool "Check new passwords for weakness"
179    default y
180    depends on PASSWD
181    help
182      With this option passwd will refuse new passwords which are "weak".
183
184config CRYPTPW
185    bool "cryptpw"
186    default n
187    help
188      Applet for crypting a string.
189
190config CHPASSWD
191       bool "chpasswd"
192       default n
193       help
194         chpasswd  reads  a  file  of user name and password pairs from
195         standard input and uses this information to update a group of
196         existing users.
197
198config SU
199    bool "su"
200    default n
201    select FEATURE_SUID
202    select FEATURE_SYSLOG
203    help
204      su is used to become another user during a login session.
205      Invoked without a username, su defaults to becoming the super user.
206
207      Note that Busybox binary must be setuid root for this applet to
208      work properly.
209
210config FEATURE_SU_SYSLOG
211    bool "Enable su to write to syslog"
212    default y
213    depends on SU
214
215config FEATURE_SU_CHECKS_SHELLS
216    bool "Enable su to check user's shell to be listed in /etc/shells"
217    depends on SU
218    default y
219
220config SULOGIN
221    bool "sulogin"
222    default n
223    select FEATURE_SYSLOG
224    help
225      sulogin is invoked when the system goes into single user
226      mode (this is done through an entry in inittab).
227
228config VLOCK
229    bool "vlock"
230    default n
231    select FEATURE_SUID
232    help
233      Build the "vlock" applet which allows you to lock (virtual) terminals.
234
235      Note that Busybox binary must be setuid root for this applet to
236      work properly.
237
238endmenu
239
Note: See TracBrowser for help on using the repository browser.