[821] | 1 | # Sample udhcpd configuration file (/etc/udhcpd.conf)
|
---|
| 2 |
|
---|
| 3 | # The start and end of the IP lease block
|
---|
| 4 |
|
---|
| 5 | start 192.168.0.20 #default: 192.168.0.20
|
---|
| 6 | end 192.168.0.254 #default: 192.168.0.254
|
---|
| 7 |
|
---|
| 8 |
|
---|
| 9 | # The interface that udhcpd will use
|
---|
| 10 |
|
---|
| 11 | interface eth0 #default: eth0
|
---|
| 12 |
|
---|
| 13 |
|
---|
| 14 | # The maximim number of leases (includes addressesd reserved
|
---|
| 15 | # by OFFER's, DECLINE's, and ARP conficts
|
---|
| 16 |
|
---|
| 17 | #max_leases 254 #default: 254
|
---|
| 18 |
|
---|
| 19 |
|
---|
| 20 | # If remaining is true (default), udhcpd will store the time
|
---|
| 21 | # remaining for each lease in the udhcpd leases file. This is
|
---|
| 22 | # for embedded systems that cannot keep time between reboots.
|
---|
| 23 | # If you set remaining to no, the absolute time that the lease
|
---|
| 24 | # expires at will be stored in the dhcpd.leases file.
|
---|
| 25 |
|
---|
| 26 | #remaining yes #default: yes
|
---|
| 27 |
|
---|
| 28 |
|
---|
| 29 | # The time period at which udhcpd will write out a dhcpd.leases
|
---|
| 30 | # file. If this is 0, udhcpd will never automatically write a
|
---|
| 31 | # lease file. (specified in seconds)
|
---|
| 32 |
|
---|
| 33 | #auto_time 7200 #default: 7200 (2 hours)
|
---|
| 34 |
|
---|
| 35 |
|
---|
| 36 | # The amount of time that an IP will be reserved (leased) for if a
|
---|
| 37 | # DHCP decline message is received (seconds).
|
---|
| 38 |
|
---|
| 39 | #decline_time 3600 #default: 3600 (1 hour)
|
---|
| 40 |
|
---|
| 41 |
|
---|
| 42 | # The amount of time that an IP will be reserved (leased) for if an
|
---|
| 43 | # ARP conflct occurs. (seconds
|
---|
| 44 |
|
---|
| 45 | #conflict_time 3600 #default: 3600 (1 hour)
|
---|
| 46 |
|
---|
| 47 |
|
---|
| 48 | # How long an offered address is reserved (leased) in seconds
|
---|
| 49 |
|
---|
| 50 | #offer_time 60 #default: 60 (1 minute)
|
---|
| 51 |
|
---|
| 52 | # If a lease to be given is below this value, the full lease time is
|
---|
| 53 | # instead used (seconds).
|
---|
| 54 |
|
---|
| 55 | #min_lease 60 #defult: 60
|
---|
| 56 |
|
---|
| 57 |
|
---|
| 58 | # The location of the leases file
|
---|
| 59 |
|
---|
| 60 | #lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
|
---|
| 61 |
|
---|
| 62 | # The location of the pid file
|
---|
| 63 | #pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid
|
---|
| 64 |
|
---|
| 65 | # Everytime udhcpd writes a leases file, the below script will be called.
|
---|
| 66 | # Useful for writing the lease file to flash every few hours.
|
---|
| 67 |
|
---|
| 68 | #notify_file #default: (no script)
|
---|
| 69 |
|
---|
| 70 | #notify_file dumpleases # <--- usefull for debugging
|
---|
| 71 |
|
---|
| 72 | # The following are bootp specific options, setable by udhcpd.
|
---|
| 73 |
|
---|
| 74 | #siaddr 192.168.0.22 #default: 0.0.0.0
|
---|
| 75 |
|
---|
| 76 | #sname zorak #default: (none)
|
---|
| 77 |
|
---|
| 78 | #boot_file /var/nfs_root #default: (none)
|
---|
| 79 |
|
---|
| 80 | # The remainer of options are DHCP options and can be specifed with the
|
---|
| 81 | # keyword 'opt' or 'option'. If an option can take multiple items, such
|
---|
| 82 | # as the dns option, they can be listed on the same line, or multiple
|
---|
| 83 | # lines. The only option with a default is 'lease'.
|
---|
| 84 |
|
---|
| 85 | #Examles
|
---|
| 86 | opt dns 192.168.10.2 192.168.10.10
|
---|
| 87 | option subnet 255.255.255.0
|
---|
| 88 | opt router 192.168.10.2
|
---|
| 89 | opt wins 192.168.10.10
|
---|
| 90 | option dns 129.219.13.81 # appened to above DNS servers for a total of 3
|
---|
| 91 | option domain local
|
---|
| 92 | option lease 864000 # 10 days of seconds
|
---|
| 93 |
|
---|
| 94 |
|
---|
| 95 | # Currently supported options, for more info, see options.c
|
---|
| 96 | #opt subnet
|
---|
| 97 | #opt timezone
|
---|
| 98 | #opt router
|
---|
| 99 | #opt timesvr
|
---|
| 100 | #opt namesvr
|
---|
| 101 | #opt dns
|
---|
| 102 | #opt logsvr
|
---|
| 103 | #opt cookiesvr
|
---|
| 104 | #opt lprsvr
|
---|
| 105 | #opt bootsize
|
---|
| 106 | #opt domain
|
---|
| 107 | #opt swapsvr
|
---|
| 108 | #opt rootpath
|
---|
| 109 | #opt ipttl
|
---|
| 110 | #opt mtu
|
---|
| 111 | #opt broadcast
|
---|
| 112 | #opt wins
|
---|
| 113 | #opt lease
|
---|
| 114 | #opt ntpsrv
|
---|
| 115 | #opt tftp
|
---|
| 116 | #opt bootfile
|
---|
| 117 |
|
---|
| 118 |
|
---|
| 119 | # Static leases map
|
---|
| 120 | #static_lease 00:60:08:11:CE:4E 192.168.0.54
|
---|
| 121 | #static_lease 00:60:08:11:CE:3E 192.168.0.44
|
---|
| 122 |
|
---|
| 123 |
|
---|